summaryrefslogtreecommitdiffstats
path: root/kernel/drivers/net/irda/w83977af_ir.h
diff options
context:
space:
mode:
Diffstat (limited to 'kernel/drivers/net/irda/w83977af_ir.h')
-rw-r--r--kernel/drivers/net/irda/w83977af_ir.h198
1 files changed, 198 insertions, 0 deletions
diff --git a/kernel/drivers/net/irda/w83977af_ir.h b/kernel/drivers/net/irda/w83977af_ir.h
new file mode 100644
index 000000000..fefe9b11e
--- /dev/null
+++ b/kernel/drivers/net/irda/w83977af_ir.h
@@ -0,0 +1,198 @@
+/*********************************************************************
+ *
+ * Filename: w83977af_ir.h
+ * Version:
+ * Description:
+ * Status: Experimental.
+ * Author: Paul VanderSpek
+ * Created at: Thu Nov 19 13:55:34 1998
+ * Modified at: Tue Jan 11 13:08:19 2000
+ * Modified by: Dag Brattli <dagb@cs.uit.no>
+ *
+ * Copyright (c) 1998-2000 Dag Brattli, All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * Neither Dag Brattli nor University of Tromsø admit liability nor
+ * provide warranty for any of this software. This material is
+ * provided "AS-IS" and at no charge.
+ *
+ ********************************************************************/
+
+#ifndef W83977AF_IR_H
+#define W83977AF_IR_H
+
+#include <asm/io.h>
+#include <linux/types.h>
+
+/* Flags for configuration register CRF0 */
+#define ENBNKSEL 0x01
+#define APEDCRC 0x02
+#define TXW4C 0x04
+#define RXW4C 0x08
+
+/* Bank 0 */
+#define RBR 0x00 /* Receiver buffer register */
+#define TBR 0x00 /* Transmitter buffer register */
+
+#define ICR 0x01 /* Interrupt configuration register */
+#define ICR_ERBRI 0x01 /* Receiver buffer register interrupt */
+#define ICR_ETBREI 0x02 /* Transeiver empty interrupt */
+#define ICR_EUSRI 0x04//* IR status interrupt */
+#define ICR_EHSRI 0x04
+#define ICR_ETXURI 0x04 /* Tx underrun */
+#define ICR_EDMAI 0x10 /* DMA interrupt */
+#define ICR_ETXTHI 0x20 /* Transmitter threshold interrupt */
+#define ICR_EFSFI 0x40 /* Frame status FIFO interrupt */
+#define ICR_ETMRI 0x80 /* Timer interrupt */
+
+#define UFR 0x02 /* FIFO control register */
+#define UFR_EN_FIFO 0x01 /* Enable FIFO's */
+#define UFR_RXF_RST 0x02 /* Reset Rx FIFO */
+#define UFR_TXF_RST 0x04 /* Reset Tx FIFO */
+#define UFR_RXTL 0x80 /* Rx FIFO threshold (set to 16) */
+#define UFR_TXTL 0x20 /* Tx FIFO threshold (set to 17) */
+
+#define ISR 0x02 /* Interrupt status register */
+#define ISR_RXTH_I 0x01 /* Receive threshold interrupt */
+#define ISR_TXEMP_I 0x02 /* Transmitter empty interrupt */
+#define ISR_FEND_I 0x04
+#define ISR_DMA_I 0x10
+#define ISR_TXTH_I 0x20 /* Transmitter threshold interrupt */
+#define ISR_FSF_I 0x40
+#define ISR_TMR_I 0x80 /* Timer interrupt */
+
+#define UCR 0x03 /* Uart control register */
+#define UCR_DLS8 0x03 /* 8N1 */
+
+#define SSR 0x03 /* Sets select register */
+#define SET0 UCR_DLS8 /* Make sure we keep 8N1 */
+#define SET1 (0x80|UCR_DLS8) /* Make sure we keep 8N1 */
+#define SET2 0xE0
+#define SET3 0xE4
+#define SET4 0xE8
+#define SET5 0xEC
+#define SET6 0xF0
+#define SET7 0xF4
+
+#define HCR 0x04
+#define HCR_MODE_MASK ~(0xD0)
+#define HCR_SIR 0x60
+#define HCR_MIR_576 0x20
+#define HCR_MIR_1152 0x80
+#define HCR_FIR 0xA0
+#define HCR_EN_DMA 0x04
+#define HCR_EN_IRQ 0x08
+#define HCR_TX_WT 0x08
+
+#define USR 0x05 /* IR status register */
+#define USR_RDR 0x01 /* Receive data ready */
+#define USR_TSRE 0x40 /* Transmitter empty? */
+
+#define AUDR 0x07
+#define AUDR_SFEND 0x08 /* Set a frame end */
+#define AUDR_RXBSY 0x20 /* Rx busy */
+#define AUDR_UNDR 0x40 /* Transeiver underrun */
+
+/* Set 2 */
+#define ABLL 0x00 /* Advanced baud rate divisor latch (low byte) */
+#define ABHL 0x01 /* Advanced baud rate divisor latch (high byte) */
+
+#define ADCR1 0x02
+#define ADCR1_ADV_SL 0x01
+#define ADCR1_D_CHSW 0x08 /* the specs are wrong. its bit 3, not 4 */
+#define ADCR1_DMA_F 0x02
+
+#define ADCR2 0x04
+#define ADCR2_TXFS32 0x01
+#define ADCR2_RXFS32 0x04
+
+#define RXFDTH 0x07
+
+/* Set 3 */
+#define AUID 0x00
+
+/* Set 4 */
+#define TMRL 0x00 /* Timer value register (low byte) */
+#define TMRH 0x01 /* Timer value register (high byte) */
+
+#define IR_MSL 0x02 /* Infrared mode select */
+#define IR_MSL_EN_TMR 0x01 /* Enable timer */
+
+#define TFRLL 0x04 /* Transmitter frame length (low byte) */
+#define TFRLH 0x05 /* Transmitter frame length (high byte) */
+#define RFRLL 0x06 /* Receiver frame length (low byte) */
+#define RFRLH 0x07 /* Receiver frame length (high byte) */
+
+/* Set 5 */
+
+#define FS_FO 0x05 /* Frame status FIFO */
+#define FS_FO_FSFDR 0x80 /* Frame status FIFO data ready */
+#define FS_FO_LST_FR 0x40 /* Frame lost */
+#define FS_FO_MX_LEX 0x10 /* Max frame len exceeded */
+#define FS_FO_PHY_ERR 0x08 /* Physical layer error */
+#define FS_FO_CRC_ERR 0x04
+#define FS_FO_RX_OV 0x02 /* Receive overrun */
+#define FS_FO_FSF_OV 0x01 /* Frame status FIFO overrun */
+#define FS_FO_ERR_MSK 0x5f /* Error mask */
+
+#define RFLFL 0x06
+#define RFLFH 0x07
+
+/* Set 6 */
+#define IR_CFG2 0x00
+#define IR_CFG2_DIS_CRC 0x02
+
+/* Set 7 */
+#define IRM_CR 0x07 /* Infrared module control register */
+#define IRM_CR_IRX_MSL 0x40
+#define IRM_CR_AF_MNT 0x80 /* Automatic format */
+
+/* For storing entries in the status FIFO */
+struct st_fifo_entry {
+ int status;
+ int len;
+};
+
+struct st_fifo {
+ struct st_fifo_entry entries[10];
+ int head;
+ int tail;
+ int len;
+};
+
+/* Private data for each instance */
+struct w83977af_ir {
+ struct st_fifo st_fifo;
+
+ int tx_buff_offsets[10]; /* Offsets between frames in tx_buff */
+ int tx_len; /* Number of frames in tx_buff */
+
+ struct net_device *netdev; /* Yes! we are some kind of netdevice */
+
+ struct irlap_cb *irlap; /* The link layer we are binded to */
+ struct qos_info qos; /* QoS capabilities for this device */
+
+ chipio_t io; /* IrDA controller information */
+ iobuff_t tx_buff; /* Transmit buffer */
+ iobuff_t rx_buff; /* Receive buffer */
+ dma_addr_t tx_buff_dma;
+ dma_addr_t rx_buff_dma;
+
+ /* Note : currently locking is *very* incomplete, but this
+ * will get you started. Check in nsc-ircc.c for a proper
+ * locking strategy. - Jean II */
+ spinlock_t lock; /* For serializing operations */
+
+ __u32 new_speed;
+};
+
+static inline void switch_bank( int iobase, int set)
+{
+ outb(set, iobase+SSR);
+}
+
+#endif