summaryrefslogtreecommitdiffstats
path: root/kernel/drivers/net/irda/sa1100_ir.c
diff options
context:
space:
mode:
Diffstat (limited to 'kernel/drivers/net/irda/sa1100_ir.c')
-rw-r--r--kernel/drivers/net/irda/sa1100_ir.c1150
1 files changed, 1150 insertions, 0 deletions
diff --git a/kernel/drivers/net/irda/sa1100_ir.c b/kernel/drivers/net/irda/sa1100_ir.c
new file mode 100644
index 000000000..b6e44ff4e
--- /dev/null
+++ b/kernel/drivers/net/irda/sa1100_ir.c
@@ -0,0 +1,1150 @@
+/*
+ * linux/drivers/net/irda/sa1100_ir.c
+ *
+ * Copyright (C) 2000-2001 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Infra-red driver for the StrongARM SA1100 embedded microprocessor
+ *
+ * Note that we don't have to worry about the SA1111's DMA bugs in here,
+ * so we use the straight forward dma_map_* functions with a null pointer.
+ *
+ * This driver takes one kernel command line parameter, sa1100ir=, with
+ * the following options:
+ * max_rate:baudrate - set the maximum baud rate
+ * power_level:level - set the transmitter power level
+ * tx_lpm:0|1 - set transmit low power mode
+ */
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/netdevice.h>
+#include <linux/slab.h>
+#include <linux/rtnetlink.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
+#include <linux/dmaengine.h>
+#include <linux/sa11x0-dma.h>
+
+#include <net/irda/irda.h>
+#include <net/irda/wrapper.h>
+#include <net/irda/irda_device.h>
+
+#include <mach/hardware.h>
+#include <linux/platform_data/irda-sa11x0.h>
+
+static int power_level = 3;
+static int tx_lpm;
+static int max_rate = 4000000;
+
+struct sa1100_buf {
+ struct device *dev;
+ struct sk_buff *skb;
+ struct scatterlist sg;
+ struct dma_chan *chan;
+ dma_cookie_t cookie;
+};
+
+struct sa1100_irda {
+ unsigned char utcr4;
+ unsigned char power;
+ unsigned char open;
+
+ int speed;
+ int newspeed;
+
+ struct sa1100_buf dma_rx;
+ struct sa1100_buf dma_tx;
+
+ struct device *dev;
+ struct irda_platform_data *pdata;
+ struct irlap_cb *irlap;
+ struct qos_info qos;
+
+ iobuff_t tx_buff;
+ iobuff_t rx_buff;
+
+ int (*tx_start)(struct sk_buff *, struct net_device *, struct sa1100_irda *);
+ irqreturn_t (*irq)(struct net_device *, struct sa1100_irda *);
+};
+
+static int sa1100_irda_set_speed(struct sa1100_irda *, int);
+
+#define IS_FIR(si) ((si)->speed >= 4000000)
+
+#define HPSIR_MAX_RXLEN 2047
+
+static struct dma_slave_config sa1100_irda_sir_tx = {
+ .direction = DMA_TO_DEVICE,
+ .dst_addr = __PREG(Ser2UTDR),
+ .dst_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE,
+ .dst_maxburst = 4,
+};
+
+static struct dma_slave_config sa1100_irda_fir_rx = {
+ .direction = DMA_FROM_DEVICE,
+ .src_addr = __PREG(Ser2HSDR),
+ .src_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE,
+ .src_maxburst = 8,
+};
+
+static struct dma_slave_config sa1100_irda_fir_tx = {
+ .direction = DMA_TO_DEVICE,
+ .dst_addr = __PREG(Ser2HSDR),
+ .dst_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE,
+ .dst_maxburst = 8,
+};
+
+static unsigned sa1100_irda_dma_xferred(struct sa1100_buf *buf)
+{
+ struct dma_chan *chan = buf->chan;
+ struct dma_tx_state state;
+ enum dma_status status;
+
+ status = chan->device->device_tx_status(chan, buf->cookie, &state);
+ if (status != DMA_PAUSED)
+ return 0;
+
+ return sg_dma_len(&buf->sg) - state.residue;
+}
+
+static int sa1100_irda_dma_request(struct device *dev, struct sa1100_buf *buf,
+ const char *name, struct dma_slave_config *cfg)
+{
+ dma_cap_mask_t m;
+ int ret;
+
+ dma_cap_zero(m);
+ dma_cap_set(DMA_SLAVE, m);
+
+ buf->chan = dma_request_channel(m, sa11x0_dma_filter_fn, (void *)name);
+ if (!buf->chan) {
+ dev_err(dev, "unable to request DMA channel for %s\n",
+ name);
+ return -ENOENT;
+ }
+
+ ret = dmaengine_slave_config(buf->chan, cfg);
+ if (ret)
+ dev_warn(dev, "DMA slave_config for %s returned %d\n",
+ name, ret);
+
+ buf->dev = buf->chan->device->dev;
+
+ return 0;
+}
+
+static void sa1100_irda_dma_start(struct sa1100_buf *buf,
+ enum dma_transfer_direction dir, dma_async_tx_callback cb, void *cb_p)
+{
+ struct dma_async_tx_descriptor *desc;
+ struct dma_chan *chan = buf->chan;
+
+ desc = dmaengine_prep_slave_sg(chan, &buf->sg, 1, dir,
+ DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
+ if (desc) {
+ desc->callback = cb;
+ desc->callback_param = cb_p;
+ buf->cookie = dmaengine_submit(desc);
+ dma_async_issue_pending(chan);
+ }
+}
+
+/*
+ * Allocate and map the receive buffer, unless it is already allocated.
+ */
+static int sa1100_irda_rx_alloc(struct sa1100_irda *si)
+{
+ if (si->dma_rx.skb)
+ return 0;
+
+ si->dma_rx.skb = alloc_skb(HPSIR_MAX_RXLEN + 1, GFP_ATOMIC);
+ if (!si->dma_rx.skb) {
+ printk(KERN_ERR "sa1100_ir: out of memory for RX SKB\n");
+ return -ENOMEM;
+ }
+
+ /*
+ * Align any IP headers that may be contained
+ * within the frame.
+ */
+ skb_reserve(si->dma_rx.skb, 1);
+
+ sg_set_buf(&si->dma_rx.sg, si->dma_rx.skb->data, HPSIR_MAX_RXLEN);
+ if (dma_map_sg(si->dma_rx.dev, &si->dma_rx.sg, 1, DMA_FROM_DEVICE) == 0) {
+ dev_kfree_skb_any(si->dma_rx.skb);
+ return -ENOMEM;
+ }
+
+ return 0;
+}
+
+/*
+ * We want to get here as soon as possible, and get the receiver setup.
+ * We use the existing buffer.
+ */
+static void sa1100_irda_rx_dma_start(struct sa1100_irda *si)
+{
+ if (!si->dma_rx.skb) {
+ printk(KERN_ERR "sa1100_ir: rx buffer went missing\n");
+ return;
+ }
+
+ /*
+ * First empty receive FIFO
+ */
+ Ser2HSCR0 = HSCR0_HSSP;
+
+ /*
+ * Enable the DMA, receiver and receive interrupt.
+ */
+ dmaengine_terminate_all(si->dma_rx.chan);
+ sa1100_irda_dma_start(&si->dma_rx, DMA_DEV_TO_MEM, NULL, NULL);
+
+ Ser2HSCR0 = HSCR0_HSSP | HSCR0_RXE;
+}
+
+static void sa1100_irda_check_speed(struct sa1100_irda *si)
+{
+ if (si->newspeed) {
+ sa1100_irda_set_speed(si, si->newspeed);
+ si->newspeed = 0;
+ }
+}
+
+/*
+ * HP-SIR format support.
+ */
+static void sa1100_irda_sirtxdma_irq(void *id)
+{
+ struct net_device *dev = id;
+ struct sa1100_irda *si = netdev_priv(dev);
+
+ dma_unmap_sg(si->dma_tx.dev, &si->dma_tx.sg, 1, DMA_TO_DEVICE);
+ dev_kfree_skb(si->dma_tx.skb);
+ si->dma_tx.skb = NULL;
+
+ dev->stats.tx_packets++;
+ dev->stats.tx_bytes += sg_dma_len(&si->dma_tx.sg);
+
+ /* We need to ensure that the transmitter has finished. */
+ do
+ rmb();
+ while (Ser2UTSR1 & UTSR1_TBY);
+
+ /*
+ * Ok, we've finished transmitting. Now enable the receiver.
+ * Sometimes we get a receive IRQ immediately after a transmit...
+ */
+ Ser2UTSR0 = UTSR0_REB | UTSR0_RBB | UTSR0_RID;
+ Ser2UTCR3 = UTCR3_RIE | UTCR3_RXE | UTCR3_TXE;
+
+ sa1100_irda_check_speed(si);
+
+ /* I'm hungry! */
+ netif_wake_queue(dev);
+}
+
+static int sa1100_irda_sir_tx_start(struct sk_buff *skb, struct net_device *dev,
+ struct sa1100_irda *si)
+{
+ si->tx_buff.data = si->tx_buff.head;
+ si->tx_buff.len = async_wrap_skb(skb, si->tx_buff.data,
+ si->tx_buff.truesize);
+
+ si->dma_tx.skb = skb;
+ sg_set_buf(&si->dma_tx.sg, si->tx_buff.data, si->tx_buff.len);
+ if (dma_map_sg(si->dma_tx.dev, &si->dma_tx.sg, 1, DMA_TO_DEVICE) == 0) {
+ si->dma_tx.skb = NULL;
+ netif_wake_queue(dev);
+ dev->stats.tx_dropped++;
+ return NETDEV_TX_OK;
+ }
+
+ sa1100_irda_dma_start(&si->dma_tx, DMA_MEM_TO_DEV, sa1100_irda_sirtxdma_irq, dev);
+
+ /*
+ * The mean turn-around time is enforced by XBOF padding,
+ * so we don't have to do anything special here.
+ */
+ Ser2UTCR3 = UTCR3_TXE;
+
+ return NETDEV_TX_OK;
+}
+
+static irqreturn_t sa1100_irda_sir_irq(struct net_device *dev, struct sa1100_irda *si)
+{
+ int status;
+
+ status = Ser2UTSR0;
+
+ /*
+ * Deal with any receive errors first. The bytes in error may be
+ * the only bytes in the receive FIFO, so we do this first.
+ */
+ while (status & UTSR0_EIF) {
+ int stat, data;
+
+ stat = Ser2UTSR1;
+ data = Ser2UTDR;
+
+ if (stat & (UTSR1_FRE | UTSR1_ROR)) {
+ dev->stats.rx_errors++;
+ if (stat & UTSR1_FRE)
+ dev->stats.rx_frame_errors++;
+ if (stat & UTSR1_ROR)
+ dev->stats.rx_fifo_errors++;
+ } else
+ async_unwrap_char(dev, &dev->stats, &si->rx_buff, data);
+
+ status = Ser2UTSR0;
+ }
+
+ /*
+ * We must clear certain bits.
+ */
+ Ser2UTSR0 = status & (UTSR0_RID | UTSR0_RBB | UTSR0_REB);
+
+ if (status & UTSR0_RFS) {
+ /*
+ * There are at least 4 bytes in the FIFO. Read 3 bytes
+ * and leave the rest to the block below.
+ */
+ async_unwrap_char(dev, &dev->stats, &si->rx_buff, Ser2UTDR);
+ async_unwrap_char(dev, &dev->stats, &si->rx_buff, Ser2UTDR);
+ async_unwrap_char(dev, &dev->stats, &si->rx_buff, Ser2UTDR);
+ }
+
+ if (status & (UTSR0_RFS | UTSR0_RID)) {
+ /*
+ * Fifo contains more than 1 character.
+ */
+ do {
+ async_unwrap_char(dev, &dev->stats, &si->rx_buff,
+ Ser2UTDR);
+ } while (Ser2UTSR1 & UTSR1_RNE);
+
+ }
+
+ return IRQ_HANDLED;
+}
+
+/*
+ * FIR format support.
+ */
+static void sa1100_irda_firtxdma_irq(void *id)
+{
+ struct net_device *dev = id;
+ struct sa1100_irda *si = netdev_priv(dev);
+ struct sk_buff *skb;
+
+ /*
+ * Wait for the transmission to complete. Unfortunately,
+ * the hardware doesn't give us an interrupt to indicate
+ * "end of frame".
+ */
+ do
+ rmb();
+ while (!(Ser2HSSR0 & HSSR0_TUR) || Ser2HSSR1 & HSSR1_TBY);
+
+ /*
+ * Clear the transmit underrun bit.
+ */
+ Ser2HSSR0 = HSSR0_TUR;
+
+ /*
+ * Do we need to change speed? Note that we're lazy
+ * here - we don't free the old dma_rx.skb. We don't need
+ * to allocate a buffer either.
+ */
+ sa1100_irda_check_speed(si);
+
+ /*
+ * Start reception. This disables the transmitter for
+ * us. This will be using the existing RX buffer.
+ */
+ sa1100_irda_rx_dma_start(si);
+
+ /* Account and free the packet. */
+ skb = si->dma_tx.skb;
+ if (skb) {
+ dma_unmap_sg(si->dma_tx.dev, &si->dma_tx.sg, 1,
+ DMA_TO_DEVICE);
+ dev->stats.tx_packets ++;
+ dev->stats.tx_bytes += skb->len;
+ dev_kfree_skb_irq(skb);
+ si->dma_tx.skb = NULL;
+ }
+
+ /*
+ * Make sure that the TX queue is available for sending
+ * (for retries). TX has priority over RX at all times.
+ */
+ netif_wake_queue(dev);
+}
+
+static int sa1100_irda_fir_tx_start(struct sk_buff *skb, struct net_device *dev,
+ struct sa1100_irda *si)
+{
+ int mtt = irda_get_mtt(skb);
+
+ si->dma_tx.skb = skb;
+ sg_set_buf(&si->dma_tx.sg, skb->data, skb->len);
+ if (dma_map_sg(si->dma_tx.dev, &si->dma_tx.sg, 1, DMA_TO_DEVICE) == 0) {
+ si->dma_tx.skb = NULL;
+ netif_wake_queue(dev);
+ dev->stats.tx_dropped++;
+ dev_kfree_skb(skb);
+ return NETDEV_TX_OK;
+ }
+
+ sa1100_irda_dma_start(&si->dma_tx, DMA_MEM_TO_DEV, sa1100_irda_firtxdma_irq, dev);
+
+ /*
+ * If we have a mean turn-around time, impose the specified
+ * specified delay. We could shorten this by timing from
+ * the point we received the packet.
+ */
+ if (mtt)
+ udelay(mtt);
+
+ Ser2HSCR0 = HSCR0_HSSP | HSCR0_TXE;
+
+ return NETDEV_TX_OK;
+}
+
+static void sa1100_irda_fir_error(struct sa1100_irda *si, struct net_device *dev)
+{
+ struct sk_buff *skb = si->dma_rx.skb;
+ unsigned int len, stat, data;
+
+ if (!skb) {
+ printk(KERN_ERR "sa1100_ir: SKB is NULL!\n");
+ return;
+ }
+
+ /*
+ * Get the current data position.
+ */
+ len = sa1100_irda_dma_xferred(&si->dma_rx);
+ if (len > HPSIR_MAX_RXLEN)
+ len = HPSIR_MAX_RXLEN;
+ dma_unmap_sg(si->dma_rx.dev, &si->dma_rx.sg, 1, DMA_FROM_DEVICE);
+
+ do {
+ /*
+ * Read Status, and then Data.
+ */
+ stat = Ser2HSSR1;
+ rmb();
+ data = Ser2HSDR;
+
+ if (stat & (HSSR1_CRE | HSSR1_ROR)) {
+ dev->stats.rx_errors++;
+ if (stat & HSSR1_CRE)
+ dev->stats.rx_crc_errors++;
+ if (stat & HSSR1_ROR)
+ dev->stats.rx_frame_errors++;
+ } else
+ skb->data[len++] = data;
+
+ /*
+ * If we hit the end of frame, there's
+ * no point in continuing.
+ */
+ if (stat & HSSR1_EOF)
+ break;
+ } while (Ser2HSSR0 & HSSR0_EIF);
+
+ if (stat & HSSR1_EOF) {
+ si->dma_rx.skb = NULL;
+
+ skb_put(skb, len);
+ skb->dev = dev;
+ skb_reset_mac_header(skb);
+ skb->protocol = htons(ETH_P_IRDA);
+ dev->stats.rx_packets++;
+ dev->stats.rx_bytes += len;
+
+ /*
+ * Before we pass the buffer up, allocate a new one.
+ */
+ sa1100_irda_rx_alloc(si);
+
+ netif_rx(skb);
+ } else {
+ /*
+ * Remap the buffer - it was previously mapped, and we
+ * hope that this succeeds.
+ */
+ dma_map_sg(si->dma_rx.dev, &si->dma_rx.sg, 1, DMA_FROM_DEVICE);
+ }
+}
+
+/*
+ * We only have to handle RX events here; transmit events go via the TX
+ * DMA handler. We disable RX, process, and the restart RX.
+ */
+static irqreturn_t sa1100_irda_fir_irq(struct net_device *dev, struct sa1100_irda *si)
+{
+ /*
+ * Stop RX DMA
+ */
+ dmaengine_pause(si->dma_rx.chan);
+
+ /*
+ * Framing error - we throw away the packet completely.
+ * Clearing RXE flushes the error conditions and data
+ * from the fifo.
+ */
+ if (Ser2HSSR0 & (HSSR0_FRE | HSSR0_RAB)) {
+ dev->stats.rx_errors++;
+
+ if (Ser2HSSR0 & HSSR0_FRE)
+ dev->stats.rx_frame_errors++;
+
+ /*
+ * Clear out the DMA...
+ */
+ Ser2HSCR0 = HSCR0_HSSP;
+
+ /*
+ * Clear selected status bits now, so we
+ * don't miss them next time around.
+ */
+ Ser2HSSR0 = HSSR0_FRE | HSSR0_RAB;
+ }
+
+ /*
+ * Deal with any receive errors. The any of the lowest
+ * 8 bytes in the FIFO may contain an error. We must read
+ * them one by one. The "error" could even be the end of
+ * packet!
+ */
+ if (Ser2HSSR0 & HSSR0_EIF)
+ sa1100_irda_fir_error(si, dev);
+
+ /*
+ * No matter what happens, we must restart reception.
+ */
+ sa1100_irda_rx_dma_start(si);
+
+ return IRQ_HANDLED;
+}
+
+/*
+ * Set the IrDA communications speed.
+ */
+static int sa1100_irda_set_speed(struct sa1100_irda *si, int speed)
+{
+ unsigned long flags;
+ int brd, ret = -EINVAL;
+
+ switch (speed) {
+ case 9600: case 19200: case 38400:
+ case 57600: case 115200:
+ brd = 3686400 / (16 * speed) - 1;
+
+ /* Stop the receive DMA, and configure transmit. */
+ if (IS_FIR(si)) {
+ dmaengine_terminate_all(si->dma_rx.chan);
+ dmaengine_slave_config(si->dma_tx.chan,
+ &sa1100_irda_sir_tx);
+ }
+
+ local_irq_save(flags);
+
+ Ser2UTCR3 = 0;
+ Ser2HSCR0 = HSCR0_UART;
+
+ Ser2UTCR1 = brd >> 8;
+ Ser2UTCR2 = brd;
+
+ /*
+ * Clear status register
+ */
+ Ser2UTSR0 = UTSR0_REB | UTSR0_RBB | UTSR0_RID;
+ Ser2UTCR3 = UTCR3_RIE | UTCR3_RXE | UTCR3_TXE;
+
+ if (si->pdata->set_speed)
+ si->pdata->set_speed(si->dev, speed);
+
+ si->speed = speed;
+ si->tx_start = sa1100_irda_sir_tx_start;
+ si->irq = sa1100_irda_sir_irq;
+
+ local_irq_restore(flags);
+ ret = 0;
+ break;
+
+ case 4000000:
+ if (!IS_FIR(si))
+ dmaengine_slave_config(si->dma_tx.chan,
+ &sa1100_irda_fir_tx);
+
+ local_irq_save(flags);
+
+ Ser2HSSR0 = 0xff;
+ Ser2HSCR0 = HSCR0_HSSP;
+ Ser2UTCR3 = 0;
+
+ si->speed = speed;
+ si->tx_start = sa1100_irda_fir_tx_start;
+ si->irq = sa1100_irda_fir_irq;
+
+ if (si->pdata->set_speed)
+ si->pdata->set_speed(si->dev, speed);
+
+ sa1100_irda_rx_alloc(si);
+ sa1100_irda_rx_dma_start(si);
+
+ local_irq_restore(flags);
+
+ break;
+
+ default:
+ break;
+ }
+
+ return ret;
+}
+
+/*
+ * Control the power state of the IrDA transmitter.
+ * State:
+ * 0 - off
+ * 1 - short range, lowest power
+ * 2 - medium range, medium power
+ * 3 - maximum range, high power
+ *
+ * Currently, only assabet is known to support this.
+ */
+static int
+__sa1100_irda_set_power(struct sa1100_irda *si, unsigned int state)
+{
+ int ret = 0;
+ if (si->pdata->set_power)
+ ret = si->pdata->set_power(si->dev, state);
+ return ret;
+}
+
+static inline int
+sa1100_set_power(struct sa1100_irda *si, unsigned int state)
+{
+ int ret;
+
+ ret = __sa1100_irda_set_power(si, state);
+ if (ret == 0)
+ si->power = state;
+
+ return ret;
+}
+
+static irqreturn_t sa1100_irda_irq(int irq, void *dev_id)
+{
+ struct net_device *dev = dev_id;
+ struct sa1100_irda *si = netdev_priv(dev);
+
+ return si->irq(dev, si);
+}
+
+static int sa1100_irda_hard_xmit(struct sk_buff *skb, struct net_device *dev)
+{
+ struct sa1100_irda *si = netdev_priv(dev);
+ int speed = irda_get_next_speed(skb);
+
+ /*
+ * Does this packet contain a request to change the interface
+ * speed? If so, remember it until we complete the transmission
+ * of this frame.
+ */
+ if (speed != si->speed && speed != -1)
+ si->newspeed = speed;
+
+ /* If this is an empty frame, we can bypass a lot. */
+ if (skb->len == 0) {
+ sa1100_irda_check_speed(si);
+ dev_kfree_skb(skb);
+ return NETDEV_TX_OK;
+ }
+
+ netif_stop_queue(dev);
+
+ /* We must not already have a skb to transmit... */
+ BUG_ON(si->dma_tx.skb);
+
+ return si->tx_start(skb, dev, si);
+}
+
+static int
+sa1100_irda_ioctl(struct net_device *dev, struct ifreq *ifreq, int cmd)
+{
+ struct if_irda_req *rq = (struct if_irda_req *)ifreq;
+ struct sa1100_irda *si = netdev_priv(dev);
+ int ret = -EOPNOTSUPP;
+
+ switch (cmd) {
+ case SIOCSBANDWIDTH:
+ if (capable(CAP_NET_ADMIN)) {
+ /*
+ * We are unable to set the speed if the
+ * device is not running.
+ */
+ if (si->open) {
+ ret = sa1100_irda_set_speed(si,
+ rq->ifr_baudrate);
+ } else {
+ printk("sa1100_irda_ioctl: SIOCSBANDWIDTH: !netif_running\n");
+ ret = 0;
+ }
+ }
+ break;
+
+ case SIOCSMEDIABUSY:
+ ret = -EPERM;
+ if (capable(CAP_NET_ADMIN)) {
+ irda_device_set_media_busy(dev, TRUE);
+ ret = 0;
+ }
+ break;
+
+ case SIOCGRECEIVING:
+ rq->ifr_receiving = IS_FIR(si) ? 0
+ : si->rx_buff.state != OUTSIDE_FRAME;
+ break;
+
+ default:
+ break;
+ }
+
+ return ret;
+}
+
+static int sa1100_irda_startup(struct sa1100_irda *si)
+{
+ int ret;
+
+ /*
+ * Ensure that the ports for this device are setup correctly.
+ */
+ if (si->pdata->startup) {
+ ret = si->pdata->startup(si->dev);
+ if (ret)
+ return ret;
+ }
+
+ /*
+ * Configure PPC for IRDA - we want to drive TXD2 low.
+ * We also want to drive this pin low during sleep.
+ */
+ PPSR &= ~PPC_TXD2;
+ PSDR &= ~PPC_TXD2;
+ PPDR |= PPC_TXD2;
+
+ /*
+ * Enable HP-SIR modulation, and ensure that the port is disabled.
+ */
+ Ser2UTCR3 = 0;
+ Ser2HSCR0 = HSCR0_UART;
+ Ser2UTCR4 = si->utcr4;
+ Ser2UTCR0 = UTCR0_8BitData;
+ Ser2HSCR2 = HSCR2_TrDataH | HSCR2_RcDataL;
+
+ /*
+ * Clear status register
+ */
+ Ser2UTSR0 = UTSR0_REB | UTSR0_RBB | UTSR0_RID;
+
+ ret = sa1100_irda_set_speed(si, si->speed = 9600);
+ if (ret) {
+ Ser2UTCR3 = 0;
+ Ser2HSCR0 = 0;
+
+ if (si->pdata->shutdown)
+ si->pdata->shutdown(si->dev);
+ }
+
+ return ret;
+}
+
+static void sa1100_irda_shutdown(struct sa1100_irda *si)
+{
+ /*
+ * Stop all DMA activity.
+ */
+ dmaengine_terminate_all(si->dma_rx.chan);
+ dmaengine_terminate_all(si->dma_tx.chan);
+
+ /* Disable the port. */
+ Ser2UTCR3 = 0;
+ Ser2HSCR0 = 0;
+
+ if (si->pdata->shutdown)
+ si->pdata->shutdown(si->dev);
+}
+
+static int sa1100_irda_start(struct net_device *dev)
+{
+ struct sa1100_irda *si = netdev_priv(dev);
+ int err;
+
+ si->speed = 9600;
+
+ err = sa1100_irda_dma_request(si->dev, &si->dma_rx, "Ser2ICPRc",
+ &sa1100_irda_fir_rx);
+ if (err)
+ goto err_rx_dma;
+
+ err = sa1100_irda_dma_request(si->dev, &si->dma_tx, "Ser2ICPTr",
+ &sa1100_irda_sir_tx);
+ if (err)
+ goto err_tx_dma;
+
+ /*
+ * Setup the serial port for the specified speed.
+ */
+ err = sa1100_irda_startup(si);
+ if (err)
+ goto err_startup;
+
+ /*
+ * Open a new IrLAP layer instance.
+ */
+ si->irlap = irlap_open(dev, &si->qos, "sa1100");
+ err = -ENOMEM;
+ if (!si->irlap)
+ goto err_irlap;
+
+ err = request_irq(dev->irq, sa1100_irda_irq, 0, dev->name, dev);
+ if (err)
+ goto err_irq;
+
+ /*
+ * Now enable the interrupt and start the queue
+ */
+ si->open = 1;
+ sa1100_set_power(si, power_level); /* low power mode */
+
+ netif_start_queue(dev);
+ return 0;
+
+err_irq:
+ irlap_close(si->irlap);
+err_irlap:
+ si->open = 0;
+ sa1100_irda_shutdown(si);
+err_startup:
+ dma_release_channel(si->dma_tx.chan);
+err_tx_dma:
+ dma_release_channel(si->dma_rx.chan);
+err_rx_dma:
+ return err;
+}
+
+static int sa1100_irda_stop(struct net_device *dev)
+{
+ struct sa1100_irda *si = netdev_priv(dev);
+ struct sk_buff *skb;
+
+ netif_stop_queue(dev);
+
+ si->open = 0;
+ sa1100_irda_shutdown(si);
+
+ /*
+ * If we have been doing any DMA activity, make sure we
+ * tidy that up cleanly.
+ */
+ skb = si->dma_rx.skb;
+ if (skb) {
+ dma_unmap_sg(si->dma_rx.dev, &si->dma_rx.sg, 1,
+ DMA_FROM_DEVICE);
+ dev_kfree_skb(skb);
+ si->dma_rx.skb = NULL;
+ }
+
+ skb = si->dma_tx.skb;
+ if (skb) {
+ dma_unmap_sg(si->dma_tx.dev, &si->dma_tx.sg, 1,
+ DMA_TO_DEVICE);
+ dev_kfree_skb(skb);
+ si->dma_tx.skb = NULL;
+ }
+
+ /* Stop IrLAP */
+ if (si->irlap) {
+ irlap_close(si->irlap);
+ si->irlap = NULL;
+ }
+
+ /*
+ * Free resources
+ */
+ dma_release_channel(si->dma_tx.chan);
+ dma_release_channel(si->dma_rx.chan);
+ free_irq(dev->irq, dev);
+
+ sa1100_set_power(si, 0);
+
+ return 0;
+}
+
+static int sa1100_irda_init_iobuf(iobuff_t *io, int size)
+{
+ io->head = kmalloc(size, GFP_KERNEL | GFP_DMA);
+ if (io->head != NULL) {
+ io->truesize = size;
+ io->in_frame = FALSE;
+ io->state = OUTSIDE_FRAME;
+ io->data = io->head;
+ }
+ return io->head ? 0 : -ENOMEM;
+}
+
+static const struct net_device_ops sa1100_irda_netdev_ops = {
+ .ndo_open = sa1100_irda_start,
+ .ndo_stop = sa1100_irda_stop,
+ .ndo_start_xmit = sa1100_irda_hard_xmit,
+ .ndo_do_ioctl = sa1100_irda_ioctl,
+};
+
+static int sa1100_irda_probe(struct platform_device *pdev)
+{
+ struct net_device *dev;
+ struct sa1100_irda *si;
+ unsigned int baudrate_mask;
+ int err, irq;
+
+ if (!pdev->dev.platform_data)
+ return -EINVAL;
+
+ irq = platform_get_irq(pdev, 0);
+ if (irq <= 0)
+ return irq < 0 ? irq : -ENXIO;
+
+ err = request_mem_region(__PREG(Ser2UTCR0), 0x24, "IrDA") ? 0 : -EBUSY;
+ if (err)
+ goto err_mem_1;
+ err = request_mem_region(__PREG(Ser2HSCR0), 0x1c, "IrDA") ? 0 : -EBUSY;
+ if (err)
+ goto err_mem_2;
+ err = request_mem_region(__PREG(Ser2HSCR2), 0x04, "IrDA") ? 0 : -EBUSY;
+ if (err)
+ goto err_mem_3;
+
+ dev = alloc_irdadev(sizeof(struct sa1100_irda));
+ if (!dev) {
+ err = -ENOMEM;
+ goto err_mem_4;
+ }
+
+ SET_NETDEV_DEV(dev, &pdev->dev);
+
+ si = netdev_priv(dev);
+ si->dev = &pdev->dev;
+ si->pdata = pdev->dev.platform_data;
+
+ sg_init_table(&si->dma_rx.sg, 1);
+ sg_init_table(&si->dma_tx.sg, 1);
+
+ /*
+ * Initialise the HP-SIR buffers
+ */
+ err = sa1100_irda_init_iobuf(&si->rx_buff, 14384);
+ if (err)
+ goto err_mem_5;
+ err = sa1100_irda_init_iobuf(&si->tx_buff, IRDA_SIR_MAX_FRAME);
+ if (err)
+ goto err_mem_5;
+
+ dev->netdev_ops = &sa1100_irda_netdev_ops;
+ dev->irq = irq;
+
+ irda_init_max_qos_capabilies(&si->qos);
+
+ /*
+ * We support original IRDA up to 115k2. (we don't currently
+ * support 4Mbps). Min Turn Time set to 1ms or greater.
+ */
+ baudrate_mask = IR_9600;
+
+ switch (max_rate) {
+ case 4000000: baudrate_mask |= IR_4000000 << 8;
+ case 115200: baudrate_mask |= IR_115200;
+ case 57600: baudrate_mask |= IR_57600;
+ case 38400: baudrate_mask |= IR_38400;
+ case 19200: baudrate_mask |= IR_19200;
+ }
+
+ si->qos.baud_rate.bits &= baudrate_mask;
+ si->qos.min_turn_time.bits = 7;
+
+ irda_qos_bits_to_value(&si->qos);
+
+ si->utcr4 = UTCR4_HPSIR;
+ if (tx_lpm)
+ si->utcr4 |= UTCR4_Z1_6us;
+
+ /*
+ * Initially enable HP-SIR modulation, and ensure that the port
+ * is disabled.
+ */
+ Ser2UTCR3 = 0;
+ Ser2UTCR4 = si->utcr4;
+ Ser2HSCR0 = HSCR0_UART;
+
+ err = register_netdev(dev);
+ if (err == 0)
+ platform_set_drvdata(pdev, dev);
+
+ if (err) {
+ err_mem_5:
+ kfree(si->tx_buff.head);
+ kfree(si->rx_buff.head);
+ free_netdev(dev);
+ err_mem_4:
+ release_mem_region(__PREG(Ser2HSCR2), 0x04);
+ err_mem_3:
+ release_mem_region(__PREG(Ser2HSCR0), 0x1c);
+ err_mem_2:
+ release_mem_region(__PREG(Ser2UTCR0), 0x24);
+ }
+ err_mem_1:
+ return err;
+}
+
+static int sa1100_irda_remove(struct platform_device *pdev)
+{
+ struct net_device *dev = platform_get_drvdata(pdev);
+
+ if (dev) {
+ struct sa1100_irda *si = netdev_priv(dev);
+ unregister_netdev(dev);
+ kfree(si->tx_buff.head);
+ kfree(si->rx_buff.head);
+ free_netdev(dev);
+ }
+
+ release_mem_region(__PREG(Ser2HSCR2), 0x04);
+ release_mem_region(__PREG(Ser2HSCR0), 0x1c);
+ release_mem_region(__PREG(Ser2UTCR0), 0x24);
+
+ return 0;
+}
+
+#ifdef CONFIG_PM
+/*
+ * Suspend the IrDA interface.
+ */
+static int sa1100_irda_suspend(struct platform_device *pdev, pm_message_t state)
+{
+ struct net_device *dev = platform_get_drvdata(pdev);
+ struct sa1100_irda *si;
+
+ if (!dev)
+ return 0;
+
+ si = netdev_priv(dev);
+ if (si->open) {
+ /*
+ * Stop the transmit queue
+ */
+ netif_device_detach(dev);
+ disable_irq(dev->irq);
+ sa1100_irda_shutdown(si);
+ __sa1100_irda_set_power(si, 0);
+ }
+
+ return 0;
+}
+
+/*
+ * Resume the IrDA interface.
+ */
+static int sa1100_irda_resume(struct platform_device *pdev)
+{
+ struct net_device *dev = platform_get_drvdata(pdev);
+ struct sa1100_irda *si;
+
+ if (!dev)
+ return 0;
+
+ si = netdev_priv(dev);
+ if (si->open) {
+ /*
+ * If we missed a speed change, initialise at the new speed
+ * directly. It is debatable whether this is actually
+ * required, but in the interests of continuing from where
+ * we left off it is desirable. The converse argument is
+ * that we should re-negotiate at 9600 baud again.
+ */
+ if (si->newspeed) {
+ si->speed = si->newspeed;
+ si->newspeed = 0;
+ }
+
+ sa1100_irda_startup(si);
+ __sa1100_irda_set_power(si, si->power);
+ enable_irq(dev->irq);
+
+ /*
+ * This automatically wakes up the queue
+ */
+ netif_device_attach(dev);
+ }
+
+ return 0;
+}
+#else
+#define sa1100_irda_suspend NULL
+#define sa1100_irda_resume NULL
+#endif
+
+static struct platform_driver sa1100ir_driver = {
+ .probe = sa1100_irda_probe,
+ .remove = sa1100_irda_remove,
+ .suspend = sa1100_irda_suspend,
+ .resume = sa1100_irda_resume,
+ .driver = {
+ .name = "sa11x0-ir",
+ },
+};
+
+static int __init sa1100_irda_init(void)
+{
+ /*
+ * Limit power level a sensible range.
+ */
+ if (power_level < 1)
+ power_level = 1;
+ if (power_level > 3)
+ power_level = 3;
+
+ return platform_driver_register(&sa1100ir_driver);
+}
+
+static void __exit sa1100_irda_exit(void)
+{
+ platform_driver_unregister(&sa1100ir_driver);
+}
+
+module_init(sa1100_irda_init);
+module_exit(sa1100_irda_exit);
+module_param(power_level, int, 0);
+module_param(tx_lpm, int, 0);
+module_param(max_rate, int, 0);
+
+MODULE_AUTHOR("Russell King <rmk@arm.linux.org.uk>");
+MODULE_DESCRIPTION("StrongARM SA1100 IrDA driver");
+MODULE_LICENSE("GPL");
+MODULE_PARM_DESC(power_level, "IrDA power level, 1 (low) to 3 (high)");
+MODULE_PARM_DESC(tx_lpm, "Enable transmitter low power (1.6us) mode");
+MODULE_PARM_DESC(max_rate, "Maximum baud rate (4000000, 115200, 57600, 38400, 19200, 9600)");
+MODULE_ALIAS("platform:sa11x0-ir");