diff options
Diffstat (limited to 'kernel/drivers/net/irda/Kconfig')
| -rw-r--r-- | kernel/drivers/net/irda/Kconfig | 405 |
1 files changed, 405 insertions, 0 deletions
diff --git a/kernel/drivers/net/irda/Kconfig b/kernel/drivers/net/irda/Kconfig new file mode 100644 index 000000000..a2c227bfb --- /dev/null +++ b/kernel/drivers/net/irda/Kconfig @@ -0,0 +1,405 @@ +menu "Infrared-port device drivers" + depends on IRDA!=n + +comment "SIR device drivers" + +config IRTTY_SIR + tristate "IrTTY (uses Linux serial driver)" + depends on IRDA && TTY + help + Say Y here if you want to build support for the IrTTY line + discipline. To compile it as a module, choose M here: the module + will be called irtty-sir. IrTTY makes it possible to use Linux's + own serial driver for all IrDA ports that are 16550 compatible. + Most IrDA chips are 16550 compatible so you should probably say Y + to this option. Using IrTTY will however limit the speed of the + connection to 115200 bps (IrDA SIR mode). + + If unsure, say Y. + +config BFIN_SIR + tristate "Blackfin SIR on UART" + depends on BLACKFIN && IRDA + default n + help + Say Y here if your want to enable SIR function on Blackfin UART + devices. + + To activate this driver you can start irattach like: + "irattach irda0 -s" + + Saying M, it will be built as a module named bfin_sir. + + Note that you need to turn off one of the serial drivers for SIR + to use that UART. + +config BFIN_SIR0 + bool "Blackfin SIR on UART0" + depends on BFIN_SIR && !SERIAL_BFIN_UART0 + +config BFIN_SIR1 + bool "Blackfin SIR on UART1" + depends on BFIN_SIR && !SERIAL_BFIN_UART1 && (!BF531 && !BF532 && !BF533 && !BF561) + +config BFIN_SIR2 + bool "Blackfin SIR on UART2" + depends on BFIN_SIR && !SERIAL_BFIN_UART2 && (BF54x || BF538 || BF539) + +config BFIN_SIR3 + bool "Blackfin SIR on UART3" + depends on BFIN_SIR && !SERIAL_BFIN_UART3 && (BF54x) + +choice + prompt "SIR Mode" + depends on BFIN_SIR + default SIR_BFIN_DMA + +config SIR_BFIN_DMA + bool "DMA mode" + depends on !DMA_UNCACHED_NONE + +config SIR_BFIN_PIO + bool "PIO mode" +endchoice + +config SH_SIR + tristate "SuperH SIR on UART" + depends on IRDA && SUPERH && \ + (CPU_SUBTYPE_SH7722 || CPU_SUBTYPE_SH7723 || \ + CPU_SUBTYPE_SH7724) + default n + help + Say Y here if your want to enable SIR function on SuperH UART + devices. + +comment "Dongle support" + +config DONGLE + bool "Serial dongle support" + depends on IRTTY_SIR + help + Say Y here if you have an infrared device that connects to your + computer's serial port. These devices are called dongles. Then say Y + or M to the driver for your particular dongle below. + + Note that the answer to this question won't directly affect the + kernel: saying N will just cause the configurator to skip all + the questions about serial dongles. + +config ESI_DONGLE + tristate "ESI JetEye PC dongle" + depends on IRTTY_SIR && DONGLE && IRDA + help + Say Y here if you want to build support for the Extended Systems + JetEye PC dongle. To compile it as a module, choose M here. The ESI + dongle attaches to the normal 9-pin serial port connector, and can + currently only be used by IrTTY. To activate support for ESI + dongles you will have to start irattach like this: + "irattach -d esi". + +config ACTISYS_DONGLE + tristate "ACTiSYS IR-220L and IR220L+ dongle" + depends on IRTTY_SIR && DONGLE && IRDA + help + Say Y here if you want to build support for the ACTiSYS IR-220L and + IR220L+ dongles. To compile it as a module, choose M here. The + ACTiSYS dongles attaches to the normal 9-pin serial port connector, + and can currently only be used by IrTTY. To activate support for + ACTiSYS dongles you will have to start irattach like this: + "irattach -d actisys" or "irattach -d actisys+". + +config TEKRAM_DONGLE + tristate "Tekram IrMate 210B dongle" + depends on IRTTY_SIR && DONGLE && IRDA + help + Say Y here if you want to build support for the Tekram IrMate 210B + dongle. To compile it as a module, choose M here. The Tekram dongle + attaches to the normal 9-pin serial port connector, and can + currently only be used by IrTTY. To activate support for Tekram + dongles you will have to start irattach like this: + "irattach -d tekram". + +config TOIM3232_DONGLE + tristate "TOIM3232 IrDa dongle" + depends on IRTTY_SIR && DONGLE && IRDA + help + Say Y here if you want to build support for the Vishay/Temic + TOIM3232 and TOIM4232 based dongles. + To compile it as a module, choose M here. + +config LITELINK_DONGLE + tristate "Parallax LiteLink dongle" + depends on IRTTY_SIR && DONGLE && IRDA + help + Say Y here if you want to build support for the Parallax Litelink + dongle. To compile it as a module, choose M here. The Parallax + dongle attaches to the normal 9-pin serial port connector, and can + currently only be used by IrTTY. To activate support for Parallax + dongles you will have to start irattach like this: + "irattach -d litelink". + +config MA600_DONGLE + tristate "Mobile Action MA600 dongle" + depends on IRTTY_SIR && DONGLE && IRDA + help + Say Y here if you want to build support for the Mobile Action MA600 + dongle. To compile it as a module, choose M here. The MA600 dongle + attaches to the normal 9-pin serial port connector, and can + currently only be used by IrTTY. The driver should also support + the MA620 USB version of the dongle, if the integrated USB-to-RS232 + converter is supported by usbserial. To activate support for + MA600 dongle you will have to start irattach like this: + "irattach -d ma600". + +config GIRBIL_DONGLE + tristate "Greenwich GIrBIL dongle" + depends on IRTTY_SIR && DONGLE && IRDA + help + Say Y here if you want to build support for the Greenwich GIrBIL + dongle. If you want to compile it as a module, choose M here. + The Greenwich dongle attaches to the normal 9-pin serial port + connector, and can currently only be used by IrTTY. To activate + support for Greenwich dongles you will have to start irattach + like this: "irattach -d girbil". + +config MCP2120_DONGLE + tristate "Microchip MCP2120" + depends on IRTTY_SIR && DONGLE && IRDA + help + Say Y here if you want to build support for the Microchip MCP2120 + dongle. If you want to compile it as a module, choose M here. + The MCP2120 dongle attaches to the normal 9-pin serial port + connector, and can currently only be used by IrTTY. To activate + support for MCP2120 dongles you will have to start irattach + like this: "irattach -d mcp2120". + + You must build this dongle yourself. For more information see: + <http://www.eyetap.org/~tangf/irda_sir_linux.html> + +config OLD_BELKIN_DONGLE + tristate "Old Belkin dongle" + depends on IRTTY_SIR && DONGLE && IRDA + help + Say Y here if you want to build support for the Adaptec Airport 1000 + and 2000 dongles. If you want to compile it as a module, choose + M here. Some information is contained in the comments + at the top of <file:drivers/net/irda/old_belkin-sir.c>. + +config ACT200L_DONGLE + tristate "ACTiSYS IR-200L dongle" + depends on IRTTY_SIR && DONGLE && IRDA + help + Say Y here if you want to build support for the ACTiSYS IR-200L + dongle. If you want to compile it as a module, choose M here. + The ACTiSYS IR-200L dongle attaches to the normal 9-pin serial + port connector, and can currently only be used by IrTTY. + To activate support for ACTiSYS IR-200L dongle you will have to + start irattach like this: "irattach -d act200l". + +config KINGSUN_DONGLE + tristate "KingSun/DonShine DS-620 IrDA-USB dongle" + depends on IRDA && USB + help + Say Y or M here if you want to build support for the KingSun/DonShine + DS-620 IrDA-USB bridge device driver. + + This USB bridge does not conform to the IrDA-USB device class + specification, and therefore needs its own specific driver. This + dongle supports SIR speed only (9600 bps). + + To compile it as a module, choose M here: the module will be called + kingsun-sir. + +config KSDAZZLE_DONGLE + tristate "KingSun Dazzle IrDA-USB dongle" + depends on IRDA && USB + help + Say Y or M here if you want to build support for the KingSun Dazzle + IrDA-USB bridge device driver. + + This USB bridge does not conform to the IrDA-USB device class + specification, and therefore needs its own specific driver. This + dongle supports SIR speeds only (9600 through 115200 bps). + + To compile it as a module, choose M here: the module will be called + ksdazzle-sir. + +config KS959_DONGLE + tristate "KingSun KS-959 IrDA-USB dongle" + depends on IRDA && USB + help + Say Y or M here if you want to build support for the KingSun KS-959 + IrDA-USB bridge device driver. + + This USB bridge does not conform to the IrDA-USB device class + specification, and therefore needs its own specific driver. This + dongle supports SIR speeds only (9600 through 57600 bps). + + To compile it as a module, choose M here: the module will be called + ks959-sir. + +comment "FIR device drivers" + +config USB_IRDA + tristate "IrDA USB dongles" + depends on IRDA && USB + select FW_LOADER + ---help--- + Say Y here if you want to build support for the USB IrDA FIR Dongle + device driver. To compile it as a module, choose M here: the module + will be called irda-usb. IrDA-USB support the various IrDA USB + dongles available and most of their peculiarities. Those dongles + plug in the USB port of your computer, are plug and play, and + support SIR and FIR (4Mbps) speeds. On the other hand, those + dongles tend to be less efficient than a FIR chipset. + + Please note that the driver is still experimental. And of course, + you will need both USB and IrDA support in your kernel... + +config SIGMATEL_FIR + tristate "SigmaTel STIr4200 bridge" + depends on IRDA && USB + select CRC32 + ---help--- + Say Y here if you want to build support for the SigmaTel STIr4200 + USB IrDA FIR bridge device driver. + + USB bridge based on the SigmaTel STIr4200 don't conform to the + IrDA-USB device class specification, and therefore need their + own specific driver. Those dongles support SIR and FIR (4Mbps) + speeds. + + To compile it as a module, choose M here: the module will be called + stir4200. + +config NSC_FIR + tristate "NSC PC87108/PC87338" + depends on IRDA && ISA_DMA_API + help + Say Y here if you want to build support for the NSC PC87108 and + PC87338 IrDA chipsets. This driver supports SIR, + MIR and FIR (4Mbps) speeds. + + To compile it as a module, choose M here: the module will be called + nsc-ircc. + +config WINBOND_FIR + tristate "Winbond W83977AF (IR)" + depends on IRDA && ISA_DMA_API + help + Say Y here if you want to build IrDA support for the Winbond + W83977AF super-io chipset. This driver should be used for the IrDA + chipset in the Corel NetWinder. The driver supports SIR, MIR and + FIR (4Mbps) speeds. + + To compile it as a module, choose M here: the module will be called + w83977af_ir. + +config TOSHIBA_FIR + tristate "Toshiba Type-O IR Port" + depends on IRDA && PCI && !64BIT && VIRT_TO_BUS + help + Say Y here if you want to build support for the Toshiba Type-O IR + and Donau oboe chipsets. These chipsets are used by the Toshiba + Libretto 100/110CT, Tecra 8100, Portege 7020 and many more laptops. + To compile it as a module, choose M here: the module will be called + donauboe. + +config AU1000_FIR + tristate "Alchemy IrDA SIR/FIR" + depends on IRDA && MIPS_ALCHEMY + help + Say Y/M here to build support the IrDA peripheral on the + Alchemy Au1000 and Au1100 SoCs. + Say M to build a module; it will be called au1k_ir.ko + +config SMC_IRCC_FIR + tristate "SMSC IrCC" + depends on IRDA && ISA_DMA_API + help + Say Y here if you want to build support for the SMC Infrared + Communications Controller. It is used in a wide variety of + laptops (Fujitsu, Sony, Compaq and some Toshiba). + To compile it as a module, choose M here: the module will be called + smsc-ircc2.o. + +config ALI_FIR + tristate "ALi M5123 FIR" + depends on IRDA && ISA_DMA_API + help + Say Y here if you want to build support for the ALi M5123 FIR + Controller. The ALi M5123 FIR Controller is embedded in ALi M1543C, + M1535, M1535D, M1535+, M1535D South Bridge. This driver supports + SIR, MIR and FIR (4Mbps) speeds. + + To compile it as a module, choose M here: the module will be called + ali-ircc. + +config VLSI_FIR + tristate "VLSI 82C147 SIR/MIR/FIR" + depends on IRDA && PCI + help + Say Y here if you want to build support for the VLSI 82C147 + PCI-IrDA Controller. This controller is used by the HP OmniBook 800 + and 5500 notebooks. The driver provides support for SIR, MIR and + FIR (4Mbps) speeds. + + To compile it as a module, choose M here: the module will be called + vlsi_ir. + +config SA1100_FIR + tristate "SA1100 Internal IR" + depends on ARCH_SA1100 && IRDA && DMA_SA11X0 + +config VIA_FIR + tristate "VIA VT8231/VT1211 SIR/MIR/FIR" + depends on IRDA && ISA_DMA_API + help + Say Y here if you want to build support for the VIA VT8231 + and VIA VT1211 IrDA controllers, found on the motherboards using + those VIA chipsets. To use this controller, you will need + to plug a specific 5 pins FIR IrDA dongle in the specific + motherboard connector. The driver provides support for SIR, MIR + and FIR (4Mbps) speeds. + + You will need to specify the 'dongle_id' module parameter to + indicate the FIR dongle attached to the controller. + + To compile it as a module, choose M here: the module will be called + via-ircc. + +config PXA_FICP + tristate "Intel PXA2xx Internal FICP" + depends on ARCH_PXA && IRDA + help + Say Y or M here if you want to build support for the PXA2xx + built-in IRDA interface which can support both SIR and FIR. + This driver relies on platform specific helper routines so + available capabilities may vary from one PXA2xx target to + another. + +config MCS_FIR + tristate "MosChip MCS7780 IrDA-USB dongle" + depends on IRDA && USB + select CRC32 + help + Say Y or M here if you want to build support for the MosChip + MCS7780 IrDA-USB bridge device driver. + + USB bridge based on the MosChip MCS7780 don't conform to the + IrDA-USB device class specification, and therefore need their + own specific driver. Those dongles support SIR and FIR (4Mbps) + speeds. + + To compile it as a module, choose M here: the module will be called + mcs7780. + +config SH_IRDA + tristate "SuperH IrDA driver" + depends on IRDA + depends on (ARCH_SHMOBILE || COMPILE_TEST) && HAS_IOMEM + help + Say Y here if your want to enable SuperH IrDA devices. + +endmenu + |