diff options
Diffstat (limited to 'kernel/drivers/net/ethernet/toshiba/spider_net.c')
| -rw-r--r-- | kernel/drivers/net/ethernet/toshiba/spider_net.c | 2572 |
1 files changed, 2572 insertions, 0 deletions
diff --git a/kernel/drivers/net/ethernet/toshiba/spider_net.c b/kernel/drivers/net/ethernet/toshiba/spider_net.c new file mode 100644 index 000000000..8e9371a33 --- /dev/null +++ b/kernel/drivers/net/ethernet/toshiba/spider_net.c @@ -0,0 +1,2572 @@ +/* + * Network device driver for Cell Processor-Based Blade and Celleb platform + * + * (C) Copyright IBM Corp. 2005 + * (C) Copyright 2006 TOSHIBA CORPORATION + * + * Authors : Utz Bacher <utz.bacher@de.ibm.com> + * Jens Osterkamp <Jens.Osterkamp@de.ibm.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <linux/compiler.h> +#include <linux/crc32.h> +#include <linux/delay.h> +#include <linux/etherdevice.h> +#include <linux/ethtool.h> +#include <linux/firmware.h> +#include <linux/if_vlan.h> +#include <linux/in.h> +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/gfp.h> +#include <linux/ioport.h> +#include <linux/ip.h> +#include <linux/kernel.h> +#include <linux/mii.h> +#include <linux/module.h> +#include <linux/netdevice.h> +#include <linux/device.h> +#include <linux/pci.h> +#include <linux/skbuff.h> +#include <linux/tcp.h> +#include <linux/types.h> +#include <linux/vmalloc.h> +#include <linux/wait.h> +#include <linux/workqueue.h> +#include <linux/bitops.h> +#include <asm/pci-bridge.h> +#include <net/checksum.h> + +#include "spider_net.h" + +MODULE_AUTHOR("Utz Bacher <utz.bacher@de.ibm.com> and Jens Osterkamp " \ + "<Jens.Osterkamp@de.ibm.com>"); +MODULE_DESCRIPTION("Spider Southbridge Gigabit Ethernet driver"); +MODULE_LICENSE("GPL"); +MODULE_VERSION(VERSION); +MODULE_FIRMWARE(SPIDER_NET_FIRMWARE_NAME); + +static int rx_descriptors = SPIDER_NET_RX_DESCRIPTORS_DEFAULT; +static int tx_descriptors = SPIDER_NET_TX_DESCRIPTORS_DEFAULT; + +module_param(rx_descriptors, int, 0444); +module_param(tx_descriptors, int, 0444); + +MODULE_PARM_DESC(rx_descriptors, "number of descriptors used " \ + "in rx chains"); +MODULE_PARM_DESC(tx_descriptors, "number of descriptors used " \ + "in tx chain"); + +char spider_net_driver_name[] = "spidernet"; + +static const struct pci_device_id spider_net_pci_tbl[] = { + { PCI_VENDOR_ID_TOSHIBA_2, PCI_DEVICE_ID_TOSHIBA_SPIDER_NET, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0UL }, + { 0, } +}; + +MODULE_DEVICE_TABLE(pci, spider_net_pci_tbl); + +/** + * spider_net_read_reg - reads an SMMIO register of a card + * @card: device structure + * @reg: register to read from + * + * returns the content of the specified SMMIO register. + */ +static inline u32 +spider_net_read_reg(struct spider_net_card *card, u32 reg) +{ + /* We use the powerpc specific variants instead of readl_be() because + * we know spidernet is not a real PCI device and we can thus avoid the + * performance hit caused by the PCI workarounds. + */ + return in_be32(card->regs + reg); +} + +/** + * spider_net_write_reg - writes to an SMMIO register of a card + * @card: device structure + * @reg: register to write to + * @value: value to write into the specified SMMIO register + */ +static inline void +spider_net_write_reg(struct spider_net_card *card, u32 reg, u32 value) +{ + /* We use the powerpc specific variants instead of writel_be() because + * we know spidernet is not a real PCI device and we can thus avoid the + * performance hit caused by the PCI workarounds. + */ + out_be32(card->regs + reg, value); +} + +/** + * spider_net_write_phy - write to phy register + * @netdev: adapter to be written to + * @mii_id: id of MII + * @reg: PHY register + * @val: value to be written to phy register + * + * spider_net_write_phy_register writes to an arbitrary PHY + * register via the spider GPCWOPCMD register. We assume the queue does + * not run full (not more than 15 commands outstanding). + **/ +static void +spider_net_write_phy(struct net_device *netdev, int mii_id, + int reg, int val) +{ + struct spider_net_card *card = netdev_priv(netdev); + u32 writevalue; + + writevalue = ((u32)mii_id << 21) | + ((u32)reg << 16) | ((u32)val); + + spider_net_write_reg(card, SPIDER_NET_GPCWOPCMD, writevalue); +} + +/** + * spider_net_read_phy - read from phy register + * @netdev: network device to be read from + * @mii_id: id of MII + * @reg: PHY register + * + * Returns value read from PHY register + * + * spider_net_write_phy reads from an arbitrary PHY + * register via the spider GPCROPCMD register + **/ +static int +spider_net_read_phy(struct net_device *netdev, int mii_id, int reg) +{ + struct spider_net_card *card = netdev_priv(netdev); + u32 readvalue; + + readvalue = ((u32)mii_id << 21) | ((u32)reg << 16); + spider_net_write_reg(card, SPIDER_NET_GPCROPCMD, readvalue); + + /* we don't use semaphores to wait for an SPIDER_NET_GPROPCMPINT + * interrupt, as we poll for the completion of the read operation + * in spider_net_read_phy. Should take about 50 us */ + do { + readvalue = spider_net_read_reg(card, SPIDER_NET_GPCROPCMD); + } while (readvalue & SPIDER_NET_GPREXEC); + + readvalue &= SPIDER_NET_GPRDAT_MASK; + + return readvalue; +} + +/** + * spider_net_setup_aneg - initial auto-negotiation setup + * @card: device structure + **/ +static void +spider_net_setup_aneg(struct spider_net_card *card) +{ + struct mii_phy *phy = &card->phy; + u32 advertise = 0; + u16 bmsr, estat; + + bmsr = spider_net_read_phy(card->netdev, phy->mii_id, MII_BMSR); + estat = spider_net_read_phy(card->netdev, phy->mii_id, MII_ESTATUS); + + if (bmsr & BMSR_10HALF) + advertise |= ADVERTISED_10baseT_Half; + if (bmsr & BMSR_10FULL) + advertise |= ADVERTISED_10baseT_Full; + if (bmsr & BMSR_100HALF) + advertise |= ADVERTISED_100baseT_Half; + if (bmsr & BMSR_100FULL) + advertise |= ADVERTISED_100baseT_Full; + + if ((bmsr & BMSR_ESTATEN) && (estat & ESTATUS_1000_TFULL)) + advertise |= SUPPORTED_1000baseT_Full; + if ((bmsr & BMSR_ESTATEN) && (estat & ESTATUS_1000_THALF)) + advertise |= SUPPORTED_1000baseT_Half; + + sungem_phy_probe(phy, phy->mii_id); + phy->def->ops->setup_aneg(phy, advertise); + +} + +/** + * spider_net_rx_irq_off - switch off rx irq on this spider card + * @card: device structure + * + * switches off rx irq by masking them out in the GHIINTnMSK register + */ +static void +spider_net_rx_irq_off(struct spider_net_card *card) +{ + u32 regvalue; + + regvalue = SPIDER_NET_INT0_MASK_VALUE & (~SPIDER_NET_RXINT); + spider_net_write_reg(card, SPIDER_NET_GHIINT0MSK, regvalue); +} + +/** + * spider_net_rx_irq_on - switch on rx irq on this spider card + * @card: device structure + * + * switches on rx irq by enabling them in the GHIINTnMSK register + */ +static void +spider_net_rx_irq_on(struct spider_net_card *card) +{ + u32 regvalue; + + regvalue = SPIDER_NET_INT0_MASK_VALUE | SPIDER_NET_RXINT; + spider_net_write_reg(card, SPIDER_NET_GHIINT0MSK, regvalue); +} + +/** + * spider_net_set_promisc - sets the unicast address or the promiscuous mode + * @card: card structure + * + * spider_net_set_promisc sets the unicast destination address filter and + * thus either allows for non-promisc mode or promisc mode + */ +static void +spider_net_set_promisc(struct spider_net_card *card) +{ + u32 macu, macl; + struct net_device *netdev = card->netdev; + + if (netdev->flags & IFF_PROMISC) { + /* clear destination entry 0 */ + spider_net_write_reg(card, SPIDER_NET_GMRUAFILnR, 0); + spider_net_write_reg(card, SPIDER_NET_GMRUAFILnR + 0x04, 0); + spider_net_write_reg(card, SPIDER_NET_GMRUA0FIL15R, + SPIDER_NET_PROMISC_VALUE); + } else { + macu = netdev->dev_addr[0]; + macu <<= 8; + macu |= netdev->dev_addr[1]; + memcpy(&macl, &netdev->dev_addr[2], sizeof(macl)); + + macu |= SPIDER_NET_UA_DESCR_VALUE; + spider_net_write_reg(card, SPIDER_NET_GMRUAFILnR, macu); + spider_net_write_reg(card, SPIDER_NET_GMRUAFILnR + 0x04, macl); + spider_net_write_reg(card, SPIDER_NET_GMRUA0FIL15R, + SPIDER_NET_NONPROMISC_VALUE); + } +} + +/** + * spider_net_get_descr_status -- returns the status of a descriptor + * @descr: descriptor to look at + * + * returns the status as in the dmac_cmd_status field of the descriptor + */ +static inline int +spider_net_get_descr_status(struct spider_net_hw_descr *hwdescr) +{ + return hwdescr->dmac_cmd_status & SPIDER_NET_DESCR_IND_PROC_MASK; +} + +/** + * spider_net_free_chain - free descriptor chain + * @card: card structure + * @chain: address of chain + * + */ +static void +spider_net_free_chain(struct spider_net_card *card, + struct spider_net_descr_chain *chain) +{ + struct spider_net_descr *descr; + + descr = chain->ring; + do { + descr->bus_addr = 0; + descr->hwdescr->next_descr_addr = 0; + descr = descr->next; + } while (descr != chain->ring); + + dma_free_coherent(&card->pdev->dev, chain->num_desc, + chain->hwring, chain->dma_addr); +} + +/** + * spider_net_init_chain - alloc and link descriptor chain + * @card: card structure + * @chain: address of chain + * + * We manage a circular list that mirrors the hardware structure, + * except that the hardware uses bus addresses. + * + * Returns 0 on success, <0 on failure + */ +static int +spider_net_init_chain(struct spider_net_card *card, + struct spider_net_descr_chain *chain) +{ + int i; + struct spider_net_descr *descr; + struct spider_net_hw_descr *hwdescr; + dma_addr_t buf; + size_t alloc_size; + + alloc_size = chain->num_desc * sizeof(struct spider_net_hw_descr); + + chain->hwring = dma_alloc_coherent(&card->pdev->dev, alloc_size, + &chain->dma_addr, GFP_KERNEL); + if (!chain->hwring) + return -ENOMEM; + + memset(chain->ring, 0, chain->num_desc * sizeof(struct spider_net_descr)); + + /* Set up the hardware pointers in each descriptor */ + descr = chain->ring; + hwdescr = chain->hwring; + buf = chain->dma_addr; + for (i=0; i < chain->num_desc; i++, descr++, hwdescr++) { + hwdescr->dmac_cmd_status = SPIDER_NET_DESCR_NOT_IN_USE; + hwdescr->next_descr_addr = 0; + + descr->hwdescr = hwdescr; + descr->bus_addr = buf; + descr->next = descr + 1; + descr->prev = descr - 1; + + buf += sizeof(struct spider_net_hw_descr); + } + /* do actual circular list */ + (descr-1)->next = chain->ring; + chain->ring->prev = descr-1; + + spin_lock_init(&chain->lock); + chain->head = chain->ring; + chain->tail = chain->ring; + return 0; +} + +/** + * spider_net_free_rx_chain_contents - frees descr contents in rx chain + * @card: card structure + * + * returns 0 on success, <0 on failure + */ +static void +spider_net_free_rx_chain_contents(struct spider_net_card *card) +{ + struct spider_net_descr *descr; + + descr = card->rx_chain.head; + do { + if (descr->skb) { + pci_unmap_single(card->pdev, descr->hwdescr->buf_addr, + SPIDER_NET_MAX_FRAME, + PCI_DMA_BIDIRECTIONAL); + dev_kfree_skb(descr->skb); + descr->skb = NULL; + } + descr = descr->next; + } while (descr != card->rx_chain.head); +} + +/** + * spider_net_prepare_rx_descr - Reinitialize RX descriptor + * @card: card structure + * @descr: descriptor to re-init + * + * Return 0 on success, <0 on failure. + * + * Allocates a new rx skb, iommu-maps it and attaches it to the + * descriptor. Mark the descriptor as activated, ready-to-use. + */ +static int +spider_net_prepare_rx_descr(struct spider_net_card *card, + struct spider_net_descr *descr) +{ + struct spider_net_hw_descr *hwdescr = descr->hwdescr; + dma_addr_t buf; + int offset; + int bufsize; + + /* we need to round up the buffer size to a multiple of 128 */ + bufsize = (SPIDER_NET_MAX_FRAME + SPIDER_NET_RXBUF_ALIGN - 1) & + (~(SPIDER_NET_RXBUF_ALIGN - 1)); + + /* and we need to have it 128 byte aligned, therefore we allocate a + * bit more */ + /* allocate an skb */ + descr->skb = netdev_alloc_skb(card->netdev, + bufsize + SPIDER_NET_RXBUF_ALIGN - 1); + if (!descr->skb) { + if (netif_msg_rx_err(card) && net_ratelimit()) + dev_err(&card->netdev->dev, + "Not enough memory to allocate rx buffer\n"); + card->spider_stats.alloc_rx_skb_error++; + return -ENOMEM; + } + hwdescr->buf_size = bufsize; + hwdescr->result_size = 0; + hwdescr->valid_size = 0; + hwdescr->data_status = 0; + hwdescr->data_error = 0; + + offset = ((unsigned long)descr->skb->data) & + (SPIDER_NET_RXBUF_ALIGN - 1); + if (offset) + skb_reserve(descr->skb, SPIDER_NET_RXBUF_ALIGN - offset); + /* iommu-map the skb */ + buf = pci_map_single(card->pdev, descr->skb->data, + SPIDER_NET_MAX_FRAME, PCI_DMA_FROMDEVICE); + if (pci_dma_mapping_error(card->pdev, buf)) { + dev_kfree_skb_any(descr->skb); + descr->skb = NULL; + if (netif_msg_rx_err(card) && net_ratelimit()) + dev_err(&card->netdev->dev, "Could not iommu-map rx buffer\n"); + card->spider_stats.rx_iommu_map_error++; + hwdescr->dmac_cmd_status = SPIDER_NET_DESCR_NOT_IN_USE; + } else { + hwdescr->buf_addr = buf; + wmb(); + hwdescr->dmac_cmd_status = SPIDER_NET_DESCR_CARDOWNED | + SPIDER_NET_DMAC_NOINTR_COMPLETE; + } + + return 0; +} + +/** + * spider_net_enable_rxchtails - sets RX dmac chain tail addresses + * @card: card structure + * + * spider_net_enable_rxchtails sets the RX DMAC chain tail addresses in the + * chip by writing to the appropriate register. DMA is enabled in + * spider_net_enable_rxdmac. + */ +static inline void +spider_net_enable_rxchtails(struct spider_net_card *card) +{ + /* assume chain is aligned correctly */ + spider_net_write_reg(card, SPIDER_NET_GDADCHA , + card->rx_chain.tail->bus_addr); +} + +/** + * spider_net_enable_rxdmac - enables a receive DMA controller + * @card: card structure + * + * spider_net_enable_rxdmac enables the DMA controller by setting RX_DMA_EN + * in the GDADMACCNTR register + */ +static inline void +spider_net_enable_rxdmac(struct spider_net_card *card) +{ + wmb(); + spider_net_write_reg(card, SPIDER_NET_GDADMACCNTR, + SPIDER_NET_DMA_RX_VALUE); +} + +/** + * spider_net_disable_rxdmac - disables the receive DMA controller + * @card: card structure + * + * spider_net_disable_rxdmac terminates processing on the DMA controller + * by turing off the DMA controller, with the force-end flag set. + */ +static inline void +spider_net_disable_rxdmac(struct spider_net_card *card) +{ + spider_net_write_reg(card, SPIDER_NET_GDADMACCNTR, + SPIDER_NET_DMA_RX_FEND_VALUE); +} + +/** + * spider_net_refill_rx_chain - refills descriptors/skbs in the rx chains + * @card: card structure + * + * refills descriptors in the rx chain: allocates skbs and iommu-maps them. + */ +static void +spider_net_refill_rx_chain(struct spider_net_card *card) +{ + struct spider_net_descr_chain *chain = &card->rx_chain; + unsigned long flags; + + /* one context doing the refill (and a second context seeing that + * and omitting it) is ok. If called by NAPI, we'll be called again + * as spider_net_decode_one_descr is called several times. If some + * interrupt calls us, the NAPI is about to clean up anyway. */ + if (!spin_trylock_irqsave(&chain->lock, flags)) + return; + + while (spider_net_get_descr_status(chain->head->hwdescr) == + SPIDER_NET_DESCR_NOT_IN_USE) { + if (spider_net_prepare_rx_descr(card, chain->head)) + break; + chain->head = chain->head->next; + } + + spin_unlock_irqrestore(&chain->lock, flags); +} + +/** + * spider_net_alloc_rx_skbs - Allocates rx skbs in rx descriptor chains + * @card: card structure + * + * Returns 0 on success, <0 on failure. + */ +static int +spider_net_alloc_rx_skbs(struct spider_net_card *card) +{ + struct spider_net_descr_chain *chain = &card->rx_chain; + struct spider_net_descr *start = chain->tail; + struct spider_net_descr *descr = start; + + /* Link up the hardware chain pointers */ + do { + descr->prev->hwdescr->next_descr_addr = descr->bus_addr; + descr = descr->next; + } while (descr != start); + + /* Put at least one buffer into the chain. if this fails, + * we've got a problem. If not, spider_net_refill_rx_chain + * will do the rest at the end of this function. */ + if (spider_net_prepare_rx_descr(card, chain->head)) + goto error; + else + chain->head = chain->head->next; + + /* This will allocate the rest of the rx buffers; + * if not, it's business as usual later on. */ + spider_net_refill_rx_chain(card); + spider_net_enable_rxdmac(card); + return 0; + +error: + spider_net_free_rx_chain_contents(card); + return -ENOMEM; +} + +/** + * spider_net_get_multicast_hash - generates hash for multicast filter table + * @addr: multicast address + * + * returns the hash value. + * + * spider_net_get_multicast_hash calculates a hash value for a given multicast + * address, that is used to set the multicast filter tables + */ +static u8 +spider_net_get_multicast_hash(struct net_device *netdev, __u8 *addr) +{ + u32 crc; + u8 hash; + char addr_for_crc[ETH_ALEN] = { 0, }; + int i, bit; + + for (i = 0; i < ETH_ALEN * 8; i++) { + bit = (addr[i / 8] >> (i % 8)) & 1; + addr_for_crc[ETH_ALEN - 1 - i / 8] += bit << (7 - (i % 8)); + } + + crc = crc32_be(~0, addr_for_crc, netdev->addr_len); + + hash = (crc >> 27); + hash <<= 3; + hash |= crc & 7; + hash &= 0xff; + + return hash; +} + +/** + * spider_net_set_multi - sets multicast addresses and promisc flags + * @netdev: interface device structure + * + * spider_net_set_multi configures multicast addresses as needed for the + * netdev interface. It also sets up multicast, allmulti and promisc + * flags appropriately + */ +static void +spider_net_set_multi(struct net_device *netdev) +{ + struct netdev_hw_addr *ha; + u8 hash; + int i; + u32 reg; + struct spider_net_card *card = netdev_priv(netdev); + unsigned long bitmask[SPIDER_NET_MULTICAST_HASHES / BITS_PER_LONG] = + {0, }; + + spider_net_set_promisc(card); + + if (netdev->flags & IFF_ALLMULTI) { + for (i = 0; i < SPIDER_NET_MULTICAST_HASHES; i++) { + set_bit(i, bitmask); + } + goto write_hash; + } + + /* well, we know, what the broadcast hash value is: it's xfd + hash = spider_net_get_multicast_hash(netdev, netdev->broadcast); */ + set_bit(0xfd, bitmask); + + netdev_for_each_mc_addr(ha, netdev) { + hash = spider_net_get_multicast_hash(netdev, ha->addr); + set_bit(hash, bitmask); + } + +write_hash: + for (i = 0; i < SPIDER_NET_MULTICAST_HASHES / 4; i++) { + reg = 0; + if (test_bit(i * 4, bitmask)) + reg += 0x08; + reg <<= 8; + if (test_bit(i * 4 + 1, bitmask)) + reg += 0x08; + reg <<= 8; + if (test_bit(i * 4 + 2, bitmask)) + reg += 0x08; + reg <<= 8; + if (test_bit(i * 4 + 3, bitmask)) + reg += 0x08; + + spider_net_write_reg(card, SPIDER_NET_GMRMHFILnR + i * 4, reg); + } +} + +/** + * spider_net_prepare_tx_descr - fill tx descriptor with skb data + * @card: card structure + * @skb: packet to use + * + * returns 0 on success, <0 on failure. + * + * fills out the descriptor structure with skb data and len. Copies data, + * if needed (32bit DMA!) + */ +static int +spider_net_prepare_tx_descr(struct spider_net_card *card, + struct sk_buff *skb) +{ + struct spider_net_descr_chain *chain = &card->tx_chain; + struct spider_net_descr *descr; + struct spider_net_hw_descr *hwdescr; + dma_addr_t buf; + unsigned long flags; + + buf = pci_map_single(card->pdev, skb->data, skb->len, PCI_DMA_TODEVICE); + if (pci_dma_mapping_error(card->pdev, buf)) { + if (netif_msg_tx_err(card) && net_ratelimit()) + dev_err(&card->netdev->dev, "could not iommu-map packet (%p, %i). " + "Dropping packet\n", skb->data, skb->len); + card->spider_stats.tx_iommu_map_error++; + return -ENOMEM; + } + + spin_lock_irqsave(&chain->lock, flags); + descr = card->tx_chain.head; + if (descr->next == chain->tail->prev) { + spin_unlock_irqrestore(&chain->lock, flags); + pci_unmap_single(card->pdev, buf, skb->len, PCI_DMA_TODEVICE); + return -ENOMEM; + } + hwdescr = descr->hwdescr; + chain->head = descr->next; + + descr->skb = skb; + hwdescr->buf_addr = buf; + hwdescr->buf_size = skb->len; + hwdescr->next_descr_addr = 0; + hwdescr->data_status = 0; + + hwdescr->dmac_cmd_status = + SPIDER_NET_DESCR_CARDOWNED | SPIDER_NET_DMAC_TXFRMTL; + spin_unlock_irqrestore(&chain->lock, flags); + + if (skb->ip_summed == CHECKSUM_PARTIAL) + switch (ip_hdr(skb)->protocol) { + case IPPROTO_TCP: + hwdescr->dmac_cmd_status |= SPIDER_NET_DMAC_TCP; + break; + case IPPROTO_UDP: + hwdescr->dmac_cmd_status |= SPIDER_NET_DMAC_UDP; + break; + } + + /* Chain the bus address, so that the DMA engine finds this descr. */ + wmb(); + descr->prev->hwdescr->next_descr_addr = descr->bus_addr; + + card->netdev->trans_start = jiffies; /* set netdev watchdog timer */ + return 0; +} + +static int +spider_net_set_low_watermark(struct spider_net_card *card) +{ + struct spider_net_descr *descr = card->tx_chain.tail; + struct spider_net_hw_descr *hwdescr; + unsigned long flags; + int status; + int cnt=0; + int i; + + /* Measure the length of the queue. Measurement does not + * need to be precise -- does not need a lock. */ + while (descr != card->tx_chain.head) { + status = descr->hwdescr->dmac_cmd_status & SPIDER_NET_DESCR_NOT_IN_USE; + if (status == SPIDER_NET_DESCR_NOT_IN_USE) + break; + descr = descr->next; + cnt++; + } + + /* If TX queue is short, don't even bother with interrupts */ + if (cnt < card->tx_chain.num_desc/4) + return cnt; + + /* Set low-watermark 3/4th's of the way into the queue. */ + descr = card->tx_chain.tail; + cnt = (cnt*3)/4; + for (i=0;i<cnt; i++) + descr = descr->next; + + /* Set the new watermark, clear the old watermark */ + spin_lock_irqsave(&card->tx_chain.lock, flags); + descr->hwdescr->dmac_cmd_status |= SPIDER_NET_DESCR_TXDESFLG; + if (card->low_watermark && card->low_watermark != descr) { + hwdescr = card->low_watermark->hwdescr; + hwdescr->dmac_cmd_status = + hwdescr->dmac_cmd_status & ~SPIDER_NET_DESCR_TXDESFLG; + } + card->low_watermark = descr; + spin_unlock_irqrestore(&card->tx_chain.lock, flags); + return cnt; +} + +/** + * spider_net_release_tx_chain - processes sent tx descriptors + * @card: adapter structure + * @brutal: if set, don't care about whether descriptor seems to be in use + * + * returns 0 if the tx ring is empty, otherwise 1. + * + * spider_net_release_tx_chain releases the tx descriptors that spider has + * finished with (if non-brutal) or simply release tx descriptors (if brutal). + * If some other context is calling this function, we return 1 so that we're + * scheduled again (if we were scheduled) and will not lose initiative. + */ +static int +spider_net_release_tx_chain(struct spider_net_card *card, int brutal) +{ + struct net_device *dev = card->netdev; + struct spider_net_descr_chain *chain = &card->tx_chain; + struct spider_net_descr *descr; + struct spider_net_hw_descr *hwdescr; + struct sk_buff *skb; + u32 buf_addr; + unsigned long flags; + int status; + + while (1) { + spin_lock_irqsave(&chain->lock, flags); + if (chain->tail == chain->head) { + spin_unlock_irqrestore(&chain->lock, flags); + return 0; + } + descr = chain->tail; + hwdescr = descr->hwdescr; + + status = spider_net_get_descr_status(hwdescr); + switch (status) { + case SPIDER_NET_DESCR_COMPLETE: + dev->stats.tx_packets++; + dev->stats.tx_bytes += descr->skb->len; + break; + + case SPIDER_NET_DESCR_CARDOWNED: + if (!brutal) { + spin_unlock_irqrestore(&chain->lock, flags); + return 1; + } + + /* fallthrough, if we release the descriptors + * brutally (then we don't care about + * SPIDER_NET_DESCR_CARDOWNED) */ + + case SPIDER_NET_DESCR_RESPONSE_ERROR: + case SPIDER_NET_DESCR_PROTECTION_ERROR: + case SPIDER_NET_DESCR_FORCE_END: + if (netif_msg_tx_err(card)) + dev_err(&card->netdev->dev, "forcing end of tx descriptor " + "with status x%02x\n", status); + dev->stats.tx_errors++; + break; + + default: + dev->stats.tx_dropped++; + if (!brutal) { + spin_unlock_irqrestore(&chain->lock, flags); + return 1; + } + } + + chain->tail = descr->next; + hwdescr->dmac_cmd_status |= SPIDER_NET_DESCR_NOT_IN_USE; + skb = descr->skb; + descr->skb = NULL; + buf_addr = hwdescr->buf_addr; + spin_unlock_irqrestore(&chain->lock, flags); + + /* unmap the skb */ + if (skb) { + pci_unmap_single(card->pdev, buf_addr, skb->len, + PCI_DMA_TODEVICE); + dev_consume_skb_any(skb); + } + } + return 0; +} + +/** + * spider_net_kick_tx_dma - enables TX DMA processing + * @card: card structure + * + * This routine will start the transmit DMA running if + * it is not already running. This routine ned only be + * called when queueing a new packet to an empty tx queue. + * Writes the current tx chain head as start address + * of the tx descriptor chain and enables the transmission + * DMA engine. + */ +static inline void +spider_net_kick_tx_dma(struct spider_net_card *card) +{ + struct spider_net_descr *descr; + + if (spider_net_read_reg(card, SPIDER_NET_GDTDMACCNTR) & + SPIDER_NET_TX_DMA_EN) + goto out; + + descr = card->tx_chain.tail; + for (;;) { + if (spider_net_get_descr_status(descr->hwdescr) == + SPIDER_NET_DESCR_CARDOWNED) { + spider_net_write_reg(card, SPIDER_NET_GDTDCHA, + descr->bus_addr); + spider_net_write_reg(card, SPIDER_NET_GDTDMACCNTR, + SPIDER_NET_DMA_TX_VALUE); + break; + } + if (descr == card->tx_chain.head) + break; + descr = descr->next; + } + +out: + mod_timer(&card->tx_timer, jiffies + SPIDER_NET_TX_TIMER); +} + +/** + * spider_net_xmit - transmits a frame over the device + * @skb: packet to send out + * @netdev: interface device structure + * + * returns 0 on success, !0 on failure + */ +static int +spider_net_xmit(struct sk_buff *skb, struct net_device *netdev) +{ + int cnt; + struct spider_net_card *card = netdev_priv(netdev); + + spider_net_release_tx_chain(card, 0); + + if (spider_net_prepare_tx_descr(card, skb) != 0) { + netdev->stats.tx_dropped++; + netif_stop_queue(netdev); + return NETDEV_TX_BUSY; + } + + cnt = spider_net_set_low_watermark(card); + if (cnt < 5) + spider_net_kick_tx_dma(card); + return NETDEV_TX_OK; +} + +/** + * spider_net_cleanup_tx_ring - cleans up the TX ring + * @card: card structure + * + * spider_net_cleanup_tx_ring is called by either the tx_timer + * or from the NAPI polling routine. + * This routine releases resources associted with transmitted + * packets, including updating the queue tail pointer. + */ +static void +spider_net_cleanup_tx_ring(struct spider_net_card *card) +{ + if ((spider_net_release_tx_chain(card, 0) != 0) && + (card->netdev->flags & IFF_UP)) { + spider_net_kick_tx_dma(card); + netif_wake_queue(card->netdev); + } +} + +/** + * spider_net_do_ioctl - called for device ioctls + * @netdev: interface device structure + * @ifr: request parameter structure for ioctl + * @cmd: command code for ioctl + * + * returns 0 on success, <0 on failure. Currently, we have no special ioctls. + * -EOPNOTSUPP is returned, if an unknown ioctl was requested + */ +static int +spider_net_do_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd) +{ + switch (cmd) { + default: + return -EOPNOTSUPP; + } +} + +/** + * spider_net_pass_skb_up - takes an skb from a descriptor and passes it on + * @descr: descriptor to process + * @card: card structure + * + * Fills out skb structure and passes the data to the stack. + * The descriptor state is not changed. + */ +static void +spider_net_pass_skb_up(struct spider_net_descr *descr, + struct spider_net_card *card) +{ + struct spider_net_hw_descr *hwdescr = descr->hwdescr; + struct sk_buff *skb = descr->skb; + struct net_device *netdev = card->netdev; + u32 data_status = hwdescr->data_status; + u32 data_error = hwdescr->data_error; + + skb_put(skb, hwdescr->valid_size); + + /* the card seems to add 2 bytes of junk in front + * of the ethernet frame */ +#define SPIDER_MISALIGN 2 + skb_pull(skb, SPIDER_MISALIGN); + skb->protocol = eth_type_trans(skb, netdev); + + /* checksum offload */ + skb_checksum_none_assert(skb); + if (netdev->features & NETIF_F_RXCSUM) { + if ( ( (data_status & SPIDER_NET_DATA_STATUS_CKSUM_MASK) == + SPIDER_NET_DATA_STATUS_CKSUM_MASK) && + !(data_error & SPIDER_NET_DATA_ERR_CKSUM_MASK)) + skb->ip_summed = CHECKSUM_UNNECESSARY; + } + + if (data_status & SPIDER_NET_VLAN_PACKET) { + /* further enhancements: HW-accel VLAN */ + } + + /* update netdevice statistics */ + netdev->stats.rx_packets++; + netdev->stats.rx_bytes += skb->len; + + /* pass skb up to stack */ + netif_receive_skb(skb); +} + +static void show_rx_chain(struct spider_net_card *card) +{ + struct spider_net_descr_chain *chain = &card->rx_chain; + struct spider_net_descr *start= chain->tail; + struct spider_net_descr *descr= start; + struct spider_net_hw_descr *hwd = start->hwdescr; + struct device *dev = &card->netdev->dev; + u32 curr_desc, next_desc; + int status; + + int tot = 0; + int cnt = 0; + int off = start - chain->ring; + int cstat = hwd->dmac_cmd_status; + + dev_info(dev, "Total number of descrs=%d\n", + chain->num_desc); + dev_info(dev, "Chain tail located at descr=%d, status=0x%x\n", + off, cstat); + + curr_desc = spider_net_read_reg(card, SPIDER_NET_GDACTDPA); + next_desc = spider_net_read_reg(card, SPIDER_NET_GDACNEXTDA); + + status = cstat; + do + { + hwd = descr->hwdescr; + off = descr - chain->ring; + status = hwd->dmac_cmd_status; + + if (descr == chain->head) + dev_info(dev, "Chain head is at %d, head status=0x%x\n", + off, status); + + if (curr_desc == descr->bus_addr) + dev_info(dev, "HW curr desc (GDACTDPA) is at %d, status=0x%x\n", + off, status); + + if (next_desc == descr->bus_addr) + dev_info(dev, "HW next desc (GDACNEXTDA) is at %d, status=0x%x\n", + off, status); + + if (hwd->next_descr_addr == 0) + dev_info(dev, "chain is cut at %d\n", off); + + if (cstat != status) { + int from = (chain->num_desc + off - cnt) % chain->num_desc; + int to = (chain->num_desc + off - 1) % chain->num_desc; + dev_info(dev, "Have %d (from %d to %d) descrs " + "with stat=0x%08x\n", cnt, from, to, cstat); + cstat = status; + cnt = 0; + } + + cnt ++; + tot ++; + descr = descr->next; + } while (descr != start); + + dev_info(dev, "Last %d descrs with stat=0x%08x " + "for a total of %d descrs\n", cnt, cstat, tot); + +#ifdef DEBUG + /* Now dump the whole ring */ + descr = start; + do + { + struct spider_net_hw_descr *hwd = descr->hwdescr; + status = spider_net_get_descr_status(hwd); + cnt = descr - chain->ring; + dev_info(dev, "Descr %d stat=0x%08x skb=%p\n", + cnt, status, descr->skb); + dev_info(dev, "bus addr=%08x buf addr=%08x sz=%d\n", + descr->bus_addr, hwd->buf_addr, hwd->buf_size); + dev_info(dev, "next=%08x result sz=%d valid sz=%d\n", + hwd->next_descr_addr, hwd->result_size, + hwd->valid_size); + dev_info(dev, "dmac=%08x data stat=%08x data err=%08x\n", + hwd->dmac_cmd_status, hwd->data_status, + hwd->data_error); + dev_info(dev, "\n"); + + descr = descr->next; + } while (descr != start); +#endif + +} + +/** + * spider_net_resync_head_ptr - Advance head ptr past empty descrs + * + * If the driver fails to keep up and empty the queue, then the + * hardware wil run out of room to put incoming packets. This + * will cause the hardware to skip descrs that are full (instead + * of halting/retrying). Thus, once the driver runs, it wil need + * to "catch up" to where the hardware chain pointer is at. + */ +static void spider_net_resync_head_ptr(struct spider_net_card *card) +{ + unsigned long flags; + struct spider_net_descr_chain *chain = &card->rx_chain; + struct spider_net_descr *descr; + int i, status; + + /* Advance head pointer past any empty descrs */ + descr = chain->head; + status = spider_net_get_descr_status(descr->hwdescr); + + if (status == SPIDER_NET_DESCR_NOT_IN_USE) + return; + + spin_lock_irqsave(&chain->lock, flags); + + descr = chain->head; + status = spider_net_get_descr_status(descr->hwdescr); + for (i=0; i<chain->num_desc; i++) { + if (status != SPIDER_NET_DESCR_CARDOWNED) break; + descr = descr->next; + status = spider_net_get_descr_status(descr->hwdescr); + } + chain->head = descr; + + spin_unlock_irqrestore(&chain->lock, flags); +} + +static int spider_net_resync_tail_ptr(struct spider_net_card *card) +{ + struct spider_net_descr_chain *chain = &card->rx_chain; + struct spider_net_descr *descr; + int i, status; + + /* Advance tail pointer past any empty and reaped descrs */ + descr = chain->tail; + status = spider_net_get_descr_status(descr->hwdescr); + + for (i=0; i<chain->num_desc; i++) { + if ((status != SPIDER_NET_DESCR_CARDOWNED) && + (status != SPIDER_NET_DESCR_NOT_IN_USE)) break; + descr = descr->next; + status = spider_net_get_descr_status(descr->hwdescr); + } + chain->tail = descr; + + if ((i == chain->num_desc) || (i == 0)) + return 1; + return 0; +} + +/** + * spider_net_decode_one_descr - processes an RX descriptor + * @card: card structure + * + * Returns 1 if a packet has been sent to the stack, otherwise 0. + * + * Processes an RX descriptor by iommu-unmapping the data buffer + * and passing the packet up to the stack. This function is called + * in softirq context, e.g. either bottom half from interrupt or + * NAPI polling context. + */ +static int +spider_net_decode_one_descr(struct spider_net_card *card) +{ + struct net_device *dev = card->netdev; + struct spider_net_descr_chain *chain = &card->rx_chain; + struct spider_net_descr *descr = chain->tail; + struct spider_net_hw_descr *hwdescr = descr->hwdescr; + u32 hw_buf_addr; + int status; + + status = spider_net_get_descr_status(hwdescr); + + /* Nothing in the descriptor, or ring must be empty */ + if ((status == SPIDER_NET_DESCR_CARDOWNED) || + (status == SPIDER_NET_DESCR_NOT_IN_USE)) + return 0; + + /* descriptor definitively used -- move on tail */ + chain->tail = descr->next; + + /* unmap descriptor */ + hw_buf_addr = hwdescr->buf_addr; + hwdescr->buf_addr = 0xffffffff; + pci_unmap_single(card->pdev, hw_buf_addr, + SPIDER_NET_MAX_FRAME, PCI_DMA_FROMDEVICE); + + if ( (status == SPIDER_NET_DESCR_RESPONSE_ERROR) || + (status == SPIDER_NET_DESCR_PROTECTION_ERROR) || + (status == SPIDER_NET_DESCR_FORCE_END) ) { + if (netif_msg_rx_err(card)) + dev_err(&dev->dev, + "dropping RX descriptor with state %d\n", status); + dev->stats.rx_dropped++; + goto bad_desc; + } + + if ( (status != SPIDER_NET_DESCR_COMPLETE) && + (status != SPIDER_NET_DESCR_FRAME_END) ) { + if (netif_msg_rx_err(card)) + dev_err(&card->netdev->dev, + "RX descriptor with unknown state %d\n", status); + card->spider_stats.rx_desc_unk_state++; + goto bad_desc; + } + + /* The cases we'll throw away the packet immediately */ + if (hwdescr->data_error & SPIDER_NET_DESTROY_RX_FLAGS) { + if (netif_msg_rx_err(card)) + dev_err(&card->netdev->dev, + "error in received descriptor found, " + "data_status=x%08x, data_error=x%08x\n", + hwdescr->data_status, hwdescr->data_error); + goto bad_desc; + } + + if (hwdescr->dmac_cmd_status & SPIDER_NET_DESCR_BAD_STATUS) { + dev_err(&card->netdev->dev, "bad status, cmd_status=x%08x\n", + hwdescr->dmac_cmd_status); + pr_err("buf_addr=x%08x\n", hw_buf_addr); + pr_err("buf_size=x%08x\n", hwdescr->buf_size); + pr_err("next_descr_addr=x%08x\n", hwdescr->next_descr_addr); + pr_err("result_size=x%08x\n", hwdescr->result_size); + pr_err("valid_size=x%08x\n", hwdescr->valid_size); + pr_err("data_status=x%08x\n", hwdescr->data_status); + pr_err("data_error=x%08x\n", hwdescr->data_error); + pr_err("which=%ld\n", descr - card->rx_chain.ring); + + card->spider_stats.rx_desc_error++; + goto bad_desc; + } + + /* Ok, we've got a packet in descr */ + spider_net_pass_skb_up(descr, card); + descr->skb = NULL; + hwdescr->dmac_cmd_status = SPIDER_NET_DESCR_NOT_IN_USE; + return 1; + +bad_desc: + if (netif_msg_rx_err(card)) + show_rx_chain(card); + dev_kfree_skb_irq(descr->skb); + descr->skb = NULL; + hwdescr->dmac_cmd_status = SPIDER_NET_DESCR_NOT_IN_USE; + return 0; +} + +/** + * spider_net_poll - NAPI poll function called by the stack to return packets + * @netdev: interface device structure + * @budget: number of packets we can pass to the stack at most + * + * returns 0 if no more packets available to the driver/stack. Returns 1, + * if the quota is exceeded, but the driver has still packets. + * + * spider_net_poll returns all packets from the rx descriptors to the stack + * (using netif_receive_skb). If all/enough packets are up, the driver + * reenables interrupts and returns 0. If not, 1 is returned. + */ +static int spider_net_poll(struct napi_struct *napi, int budget) +{ + struct spider_net_card *card = container_of(napi, struct spider_net_card, napi); + int packets_done = 0; + + while (packets_done < budget) { + if (!spider_net_decode_one_descr(card)) + break; + + packets_done++; + } + + if ((packets_done == 0) && (card->num_rx_ints != 0)) { + if (!spider_net_resync_tail_ptr(card)) + packets_done = budget; + spider_net_resync_head_ptr(card); + } + card->num_rx_ints = 0; + + spider_net_refill_rx_chain(card); + spider_net_enable_rxdmac(card); + + spider_net_cleanup_tx_ring(card); + + /* if all packets are in the stack, enable interrupts and return 0 */ + /* if not, return 1 */ + if (packets_done < budget) { + napi_complete(napi); + spider_net_rx_irq_on(card); + card->ignore_rx_ramfull = 0; + } + + return packets_done; +} + +/** + * spider_net_change_mtu - changes the MTU of an interface + * @netdev: interface device structure + * @new_mtu: new MTU value + * + * returns 0 on success, <0 on failure + */ +static int +spider_net_change_mtu(struct net_device *netdev, int new_mtu) +{ + /* no need to re-alloc skbs or so -- the max mtu is about 2.3k + * and mtu is outbound only anyway */ + if ( (new_mtu < SPIDER_NET_MIN_MTU ) || + (new_mtu > SPIDER_NET_MAX_MTU) ) + return -EINVAL; + netdev->mtu = new_mtu; + return 0; +} + +/** + * spider_net_set_mac - sets the MAC of an interface + * @netdev: interface device structure + * @ptr: pointer to new MAC address + * + * Returns 0 on success, <0 on failure. Currently, we don't support this + * and will always return EOPNOTSUPP. + */ +static int +spider_net_set_mac(struct net_device *netdev, void *p) +{ + struct spider_net_card *card = netdev_priv(netdev); + u32 macl, macu, regvalue; + struct sockaddr *addr = p; + + if (!is_valid_ether_addr(addr->sa_data)) + return -EADDRNOTAVAIL; + + memcpy(netdev->dev_addr, addr->sa_data, ETH_ALEN); + + /* switch off GMACTPE and GMACRPE */ + regvalue = spider_net_read_reg(card, SPIDER_NET_GMACOPEMD); + regvalue &= ~((1 << 5) | (1 << 6)); + spider_net_write_reg(card, SPIDER_NET_GMACOPEMD, regvalue); + + /* write mac */ + macu = (netdev->dev_addr[0]<<24) + (netdev->dev_addr[1]<<16) + + (netdev->dev_addr[2]<<8) + (netdev->dev_addr[3]); + macl = (netdev->dev_addr[4]<<8) + (netdev->dev_addr[5]); + spider_net_write_reg(card, SPIDER_NET_GMACUNIMACU, macu); + spider_net_write_reg(card, SPIDER_NET_GMACUNIMACL, macl); + + /* switch GMACTPE and GMACRPE back on */ + regvalue = spider_net_read_reg(card, SPIDER_NET_GMACOPEMD); + regvalue |= ((1 << 5) | (1 << 6)); + spider_net_write_reg(card, SPIDER_NET_GMACOPEMD, regvalue); + + spider_net_set_promisc(card); + + return 0; +} + +/** + * spider_net_link_reset + * @netdev: net device structure + * + * This is called when the PHY_LINK signal is asserted. For the blade this is + * not connected so we should never get here. + * + */ +static void +spider_net_link_reset(struct net_device *netdev) +{ + + struct spider_net_card *card = netdev_priv(netdev); + + del_timer_sync(&card->aneg_timer); + + /* clear interrupt, block further interrupts */ + spider_net_write_reg(card, SPIDER_NET_GMACST, + spider_net_read_reg(card, SPIDER_NET_GMACST)); + spider_net_write_reg(card, SPIDER_NET_GMACINTEN, 0); + + /* reset phy and setup aneg */ + card->aneg_count = 0; + card->medium = BCM54XX_COPPER; + spider_net_setup_aneg(card); + mod_timer(&card->aneg_timer, jiffies + SPIDER_NET_ANEG_TIMER); + +} + +/** + * spider_net_handle_error_irq - handles errors raised by an interrupt + * @card: card structure + * @status_reg: interrupt status register 0 (GHIINT0STS) + * + * spider_net_handle_error_irq treats or ignores all error conditions + * found when an interrupt is presented + */ +static void +spider_net_handle_error_irq(struct spider_net_card *card, u32 status_reg, + u32 error_reg1, u32 error_reg2) +{ + u32 i; + int show_error = 1; + + /* check GHIINT0STS ************************************/ + if (status_reg) + for (i = 0; i < 32; i++) + if (status_reg & (1<<i)) + switch (i) + { + /* let error_reg1 and error_reg2 evaluation decide, what to do + case SPIDER_NET_PHYINT: + case SPIDER_NET_GMAC2INT: + case SPIDER_NET_GMAC1INT: + case SPIDER_NET_GFIFOINT: + case SPIDER_NET_DMACINT: + case SPIDER_NET_GSYSINT: + break; */ + + case SPIDER_NET_GIPSINT: + show_error = 0; + break; + + case SPIDER_NET_GPWOPCMPINT: + /* PHY write operation completed */ + show_error = 0; + break; + case SPIDER_NET_GPROPCMPINT: + /* PHY read operation completed */ + /* we don't use semaphores, as we poll for the completion + * of the read operation in spider_net_read_phy. Should take + * about 50 us */ + show_error = 0; + break; + case SPIDER_NET_GPWFFINT: + /* PHY command queue full */ + if (netif_msg_intr(card)) + dev_err(&card->netdev->dev, "PHY write queue full\n"); + show_error = 0; + break; + + /* case SPIDER_NET_GRMDADRINT: not used. print a message */ + /* case SPIDER_NET_GRMARPINT: not used. print a message */ + /* case SPIDER_NET_GRMMPINT: not used. print a message */ + + case SPIDER_NET_GDTDEN0INT: + /* someone has set TX_DMA_EN to 0 */ + show_error = 0; + break; + + case SPIDER_NET_GDDDEN0INT: /* fallthrough */ + case SPIDER_NET_GDCDEN0INT: /* fallthrough */ + case SPIDER_NET_GDBDEN0INT: /* fallthrough */ + case SPIDER_NET_GDADEN0INT: + /* someone has set RX_DMA_EN to 0 */ + show_error = 0; + break; + + /* RX interrupts */ + case SPIDER_NET_GDDFDCINT: + case SPIDER_NET_GDCFDCINT: + case SPIDER_NET_GDBFDCINT: + case SPIDER_NET_GDAFDCINT: + /* case SPIDER_NET_GDNMINT: not used. print a message */ + /* case SPIDER_NET_GCNMINT: not used. print a message */ + /* case SPIDER_NET_GBNMINT: not used. print a message */ + /* case SPIDER_NET_GANMINT: not used. print a message */ + /* case SPIDER_NET_GRFNMINT: not used. print a message */ + show_error = 0; + break; + + /* TX interrupts */ + case SPIDER_NET_GDTFDCINT: + show_error = 0; + break; + case SPIDER_NET_GTTEDINT: + show_error = 0; + break; + case SPIDER_NET_GDTDCEINT: + /* chain end. If a descriptor should be sent, kick off + * tx dma + if (card->tx_chain.tail != card->tx_chain.head) + spider_net_kick_tx_dma(card); + */ + show_error = 0; + break; + + /* case SPIDER_NET_G1TMCNTINT: not used. print a message */ + /* case SPIDER_NET_GFREECNTINT: not used. print a message */ + } + + /* check GHIINT1STS ************************************/ + if (error_reg1) + for (i = 0; i < 32; i++) + if (error_reg1 & (1<<i)) + switch (i) + { + case SPIDER_NET_GTMFLLINT: + /* TX RAM full may happen on a usual case. + * Logging is not needed. */ + show_error = 0; + break; + case SPIDER_NET_GRFDFLLINT: /* fallthrough */ + case SPIDER_NET_GRFCFLLINT: /* fallthrough */ + case SPIDER_NET_GRFBFLLINT: /* fallthrough */ + case SPIDER_NET_GRFAFLLINT: /* fallthrough */ + case SPIDER_NET_GRMFLLINT: + /* Could happen when rx chain is full */ + if (card->ignore_rx_ramfull == 0) { + card->ignore_rx_ramfull = 1; + spider_net_resync_head_ptr(card); + spider_net_refill_rx_chain(card); + spider_net_enable_rxdmac(card); + card->num_rx_ints ++; + napi_schedule(&card->napi); + } + show_error = 0; + break; + + /* case SPIDER_NET_GTMSHTINT: problem, print a message */ + case SPIDER_NET_GDTINVDINT: + /* allrighty. tx from previous descr ok */ + show_error = 0; + break; + + /* chain end */ + case SPIDER_NET_GDDDCEINT: /* fallthrough */ + case SPIDER_NET_GDCDCEINT: /* fallthrough */ + case SPIDER_NET_GDBDCEINT: /* fallthrough */ + case SPIDER_NET_GDADCEINT: + spider_net_resync_head_ptr(card); + spider_net_refill_rx_chain(card); + spider_net_enable_rxdmac(card); + card->num_rx_ints ++; + napi_schedule(&card->napi); + show_error = 0; + break; + + /* invalid descriptor */ + case SPIDER_NET_GDDINVDINT: /* fallthrough */ + case SPIDER_NET_GDCINVDINT: /* fallthrough */ + case SPIDER_NET_GDBINVDINT: /* fallthrough */ + case SPIDER_NET_GDAINVDINT: + /* Could happen when rx chain is full */ + spider_net_resync_head_ptr(card); + spider_net_refill_rx_chain(card); + spider_net_enable_rxdmac(card); + card->num_rx_ints ++; + napi_schedule(&card->napi); + show_error = 0; + break; + + /* case SPIDER_NET_GDTRSERINT: problem, print a message */ + /* case SPIDER_NET_GDDRSERINT: problem, print a message */ + /* case SPIDER_NET_GDCRSERINT: problem, print a message */ + /* case SPIDER_NET_GDBRSERINT: problem, print a message */ + /* case SPIDER_NET_GDARSERINT: problem, print a message */ + /* case SPIDER_NET_GDSERINT: problem, print a message */ + /* case SPIDER_NET_GDTPTERINT: problem, print a message */ + /* case SPIDER_NET_GDDPTERINT: problem, print a message */ + /* case SPIDER_NET_GDCPTERINT: problem, print a message */ + /* case SPIDER_NET_GDBPTERINT: problem, print a message */ + /* case SPIDER_NET_GDAPTERINT: problem, print a message */ + default: + show_error = 1; + break; + } + + /* check GHIINT2STS ************************************/ + if (error_reg2) + for (i = 0; i < 32; i++) + if (error_reg2 & (1<<i)) + switch (i) + { + /* there is nothing we can (want to) do at this time. Log a + * message, we can switch on and off the specific values later on + case SPIDER_NET_GPROPERINT: + case SPIDER_NET_GMCTCRSNGINT: + case SPIDER_NET_GMCTLCOLINT: + case SPIDER_NET_GMCTTMOTINT: + case SPIDER_NET_GMCRCAERINT: + case SPIDER_NET_GMCRCALERINT: + case SPIDER_NET_GMCRALNERINT: + case SPIDER_NET_GMCROVRINT: + case SPIDER_NET_GMCRRNTINT: + case SPIDER_NET_GMCRRXERINT: + case SPIDER_NET_GTITCSERINT: + case SPIDER_NET_GTIFMTERINT: + case SPIDER_NET_GTIPKTRVKINT: + case SPIDER_NET_GTISPINGINT: + case SPIDER_NET_GTISADNGINT: + case SPIDER_NET_GTISPDNGINT: + case SPIDER_NET_GRIFMTERINT: + case SPIDER_NET_GRIPKTRVKINT: + case SPIDER_NET_GRISPINGINT: + case SPIDER_NET_GRISADNGINT: + case SPIDER_NET_GRISPDNGINT: + break; + */ + default: + break; + } + + if ((show_error) && (netif_msg_intr(card)) && net_ratelimit()) + dev_err(&card->netdev->dev, "Error interrupt, GHIINT0STS = 0x%08x, " + "GHIINT1STS = 0x%08x, GHIINT2STS = 0x%08x\n", + status_reg, error_reg1, error_reg2); + + /* clear interrupt sources */ + spider_net_write_reg(card, SPIDER_NET_GHIINT1STS, error_reg1); + spider_net_write_reg(card, SPIDER_NET_GHIINT2STS, error_reg2); +} + +/** + * spider_net_interrupt - interrupt handler for spider_net + * @irq: interrupt number + * @ptr: pointer to net_device + * + * returns IRQ_HANDLED, if interrupt was for driver, or IRQ_NONE, if no + * interrupt found raised by card. + * + * This is the interrupt handler, that turns off + * interrupts for this device and makes the stack poll the driver + */ +static irqreturn_t +spider_net_interrupt(int irq, void *ptr) +{ + struct net_device *netdev = ptr; + struct spider_net_card *card = netdev_priv(netdev); + u32 status_reg, error_reg1, error_reg2; + + status_reg = spider_net_read_reg(card, SPIDER_NET_GHIINT0STS); + error_reg1 = spider_net_read_reg(card, SPIDER_NET_GHIINT1STS); + error_reg2 = spider_net_read_reg(card, SPIDER_NET_GHIINT2STS); + + if (!(status_reg & SPIDER_NET_INT0_MASK_VALUE) && + !(error_reg1 & SPIDER_NET_INT1_MASK_VALUE) && + !(error_reg2 & SPIDER_NET_INT2_MASK_VALUE)) + return IRQ_NONE; + + if (status_reg & SPIDER_NET_RXINT ) { + spider_net_rx_irq_off(card); + napi_schedule(&card->napi); + card->num_rx_ints ++; + } + if (status_reg & SPIDER_NET_TXINT) + napi_schedule(&card->napi); + + if (status_reg & SPIDER_NET_LINKINT) + spider_net_link_reset(netdev); + + if (status_reg & SPIDER_NET_ERRINT ) + spider_net_handle_error_irq(card, status_reg, + error_reg1, error_reg2); + + /* clear interrupt sources */ + spider_net_write_reg(card, SPIDER_NET_GHIINT0STS, status_reg); + + return IRQ_HANDLED; +} + +#ifdef CONFIG_NET_POLL_CONTROLLER +/** + * spider_net_poll_controller - artificial interrupt for netconsole etc. + * @netdev: interface device structure + * + * see Documentation/networking/netconsole.txt + */ +static void +spider_net_poll_controller(struct net_device *netdev) +{ + disable_irq(netdev->irq); + spider_net_interrupt(netdev->irq, netdev); + enable_irq(netdev->irq); +} +#endif /* CONFIG_NET_POLL_CONTROLLER */ + +/** + * spider_net_enable_interrupts - enable interrupts + * @card: card structure + * + * spider_net_enable_interrupt enables several interrupts + */ +static void +spider_net_enable_interrupts(struct spider_net_card *card) +{ + spider_net_write_reg(card, SPIDER_NET_GHIINT0MSK, + SPIDER_NET_INT0_MASK_VALUE); + spider_net_write_reg(card, SPIDER_NET_GHIINT1MSK, + SPIDER_NET_INT1_MASK_VALUE); + spider_net_write_reg(card, SPIDER_NET_GHIINT2MSK, + SPIDER_NET_INT2_MASK_VALUE); +} + +/** + * spider_net_disable_interrupts - disable interrupts + * @card: card structure + * + * spider_net_disable_interrupts disables all the interrupts + */ +static void +spider_net_disable_interrupts(struct spider_net_card *card) +{ + spider_net_write_reg(card, SPIDER_NET_GHIINT0MSK, 0); + spider_net_write_reg(card, SPIDER_NET_GHIINT1MSK, 0); + spider_net_write_reg(card, SPIDER_NET_GHIINT2MSK, 0); + spider_net_write_reg(card, SPIDER_NET_GMACINTEN, 0); +} + +/** + * spider_net_init_card - initializes the card + * @card: card structure + * + * spider_net_init_card initializes the card so that other registers can + * be used + */ +static void +spider_net_init_card(struct spider_net_card *card) +{ + spider_net_write_reg(card, SPIDER_NET_CKRCTRL, + SPIDER_NET_CKRCTRL_STOP_VALUE); + + spider_net_write_reg(card, SPIDER_NET_CKRCTRL, + SPIDER_NET_CKRCTRL_RUN_VALUE); + + /* trigger ETOMOD signal */ + spider_net_write_reg(card, SPIDER_NET_GMACOPEMD, + spider_net_read_reg(card, SPIDER_NET_GMACOPEMD) | 0x4); + + spider_net_disable_interrupts(card); +} + +/** + * spider_net_enable_card - enables the card by setting all kinds of regs + * @card: card structure + * + * spider_net_enable_card sets a lot of SMMIO registers to enable the device + */ +static void +spider_net_enable_card(struct spider_net_card *card) +{ + int i; + /* the following array consists of (register),(value) pairs + * that are set in this function. A register of 0 ends the list */ + u32 regs[][2] = { + { SPIDER_NET_GRESUMINTNUM, 0 }, + { SPIDER_NET_GREINTNUM, 0 }, + + /* set interrupt frame number registers */ + /* clear the single DMA engine registers first */ + { SPIDER_NET_GFAFRMNUM, SPIDER_NET_GFXFRAMES_VALUE }, + { SPIDER_NET_GFBFRMNUM, SPIDER_NET_GFXFRAMES_VALUE }, + { SPIDER_NET_GFCFRMNUM, SPIDER_NET_GFXFRAMES_VALUE }, + { SPIDER_NET_GFDFRMNUM, SPIDER_NET_GFXFRAMES_VALUE }, + /* then set, what we really need */ + { SPIDER_NET_GFFRMNUM, SPIDER_NET_FRAMENUM_VALUE }, + + /* timer counter registers and stuff */ + { SPIDER_NET_GFREECNNUM, 0 }, + { SPIDER_NET_GONETIMENUM, 0 }, + { SPIDER_NET_GTOUTFRMNUM, 0 }, + + /* RX mode setting */ + { SPIDER_NET_GRXMDSET, SPIDER_NET_RXMODE_VALUE }, + /* TX mode setting */ + { SPIDER_NET_GTXMDSET, SPIDER_NET_TXMODE_VALUE }, + /* IPSEC mode setting */ + { SPIDER_NET_GIPSECINIT, SPIDER_NET_IPSECINIT_VALUE }, + + { SPIDER_NET_GFTRESTRT, SPIDER_NET_RESTART_VALUE }, + + { SPIDER_NET_GMRWOLCTRL, 0 }, + { SPIDER_NET_GTESTMD, 0x10000000 }, + { SPIDER_NET_GTTQMSK, 0x00400040 }, + + { SPIDER_NET_GMACINTEN, 0 }, + + /* flow control stuff */ + { SPIDER_NET_GMACAPAUSE, SPIDER_NET_MACAPAUSE_VALUE }, + { SPIDER_NET_GMACTXPAUSE, SPIDER_NET_TXPAUSE_VALUE }, + + { SPIDER_NET_GMACBSTLMT, SPIDER_NET_BURSTLMT_VALUE }, + { 0, 0} + }; + + i = 0; + while (regs[i][0]) { + spider_net_write_reg(card, regs[i][0], regs[i][1]); + i++; + } + + /* clear unicast filter table entries 1 to 14 */ + for (i = 1; i <= 14; i++) { + spider_net_write_reg(card, + SPIDER_NET_GMRUAFILnR + i * 8, + 0x00080000); + spider_net_write_reg(card, + SPIDER_NET_GMRUAFILnR + i * 8 + 4, + 0x00000000); + } + + spider_net_write_reg(card, SPIDER_NET_GMRUA0FIL15R, 0x08080000); + + spider_net_write_reg(card, SPIDER_NET_ECMODE, SPIDER_NET_ECMODE_VALUE); + + /* set chain tail address for RX chains and + * enable DMA */ + spider_net_enable_rxchtails(card); + spider_net_enable_rxdmac(card); + + spider_net_write_reg(card, SPIDER_NET_GRXDMAEN, SPIDER_NET_WOL_VALUE); + + spider_net_write_reg(card, SPIDER_NET_GMACLENLMT, + SPIDER_NET_LENLMT_VALUE); + spider_net_write_reg(card, SPIDER_NET_GMACOPEMD, + SPIDER_NET_OPMODE_VALUE); + + spider_net_write_reg(card, SPIDER_NET_GDTDMACCNTR, + SPIDER_NET_GDTBSTA); +} + +/** + * spider_net_download_firmware - loads firmware into the adapter + * @card: card structure + * @firmware_ptr: pointer to firmware data + * + * spider_net_download_firmware loads the firmware data into the + * adapter. It assumes the length etc. to be allright. + */ +static int +spider_net_download_firmware(struct spider_net_card *card, + const void *firmware_ptr) +{ + int sequencer, i; + const u32 *fw_ptr = firmware_ptr; + + /* stop sequencers */ + spider_net_write_reg(card, SPIDER_NET_GSINIT, + SPIDER_NET_STOP_SEQ_VALUE); + + for (sequencer = 0; sequencer < SPIDER_NET_FIRMWARE_SEQS; + sequencer++) { + spider_net_write_reg(card, + SPIDER_NET_GSnPRGADR + sequencer * 8, 0); + for (i = 0; i < SPIDER_NET_FIRMWARE_SEQWORDS; i++) { + spider_net_write_reg(card, SPIDER_NET_GSnPRGDAT + + sequencer * 8, *fw_ptr); + fw_ptr++; + } + } + + if (spider_net_read_reg(card, SPIDER_NET_GSINIT)) + return -EIO; + + spider_net_write_reg(card, SPIDER_NET_GSINIT, + SPIDER_NET_RUN_SEQ_VALUE); + + return 0; +} + +/** + * spider_net_init_firmware - reads in firmware parts + * @card: card structure + * + * Returns 0 on success, <0 on failure + * + * spider_net_init_firmware opens the sequencer firmware and does some basic + * checks. This function opens and releases the firmware structure. A call + * to download the firmware is performed before the release. + * + * Firmware format + * =============== + * spider_fw.bin is expected to be a file containing 6*1024*4 bytes, 4k being + * the program for each sequencer. Use the command + * tail -q -n +2 Seq_code1_0x088.txt Seq_code2_0x090.txt \ + * Seq_code3_0x098.txt Seq_code4_0x0A0.txt Seq_code5_0x0A8.txt \ + * Seq_code6_0x0B0.txt | xxd -r -p -c4 > spider_fw.bin + * + * to generate spider_fw.bin, if you have sequencer programs with something + * like the following contents for each sequencer: + * <ONE LINE COMMENT> + * <FIRST 4-BYTES-WORD FOR SEQUENCER> + * <SECOND 4-BYTES-WORD FOR SEQUENCER> + * ... + * <1024th 4-BYTES-WORD FOR SEQUENCER> + */ +static int +spider_net_init_firmware(struct spider_net_card *card) +{ + struct firmware *firmware = NULL; + struct device_node *dn; + const u8 *fw_prop = NULL; + int err = -ENOENT; + int fw_size; + + if (request_firmware((const struct firmware **)&firmware, + SPIDER_NET_FIRMWARE_NAME, &card->pdev->dev) == 0) { + if ( (firmware->size != SPIDER_NET_FIRMWARE_LEN) && + netif_msg_probe(card) ) { + dev_err(&card->netdev->dev, + "Incorrect size of spidernet firmware in " \ + "filesystem. Looking in host firmware...\n"); + goto try_host_fw; + } + err = spider_net_download_firmware(card, firmware->data); + + release_firmware(firmware); + if (err) + goto try_host_fw; + + goto done; + } + +try_host_fw: + dn = pci_device_to_OF_node(card->pdev); + if (!dn) + goto out_err; + + fw_prop = of_get_property(dn, "firmware", &fw_size); + if (!fw_prop) + goto out_err; + + if ( (fw_size != SPIDER_NET_FIRMWARE_LEN) && + netif_msg_probe(card) ) { + dev_err(&card->netdev->dev, + "Incorrect size of spidernet firmware in host firmware\n"); + goto done; + } + + err = spider_net_download_firmware(card, fw_prop); + +done: + return err; +out_err: + if (netif_msg_probe(card)) + dev_err(&card->netdev->dev, + "Couldn't find spidernet firmware in filesystem " \ + "or host firmware\n"); + return err; +} + +/** + * spider_net_open - called upon ifonfig up + * @netdev: interface device structure + * + * returns 0 on success, <0 on failure + * + * spider_net_open allocates all the descriptors and memory needed for + * operation, sets up multicast list and enables interrupts + */ +int +spider_net_open(struct net_device *netdev) +{ + struct spider_net_card *card = netdev_priv(netdev); + int result; + + result = spider_net_init_firmware(card); + if (result) + goto init_firmware_failed; + + /* start probing with copper */ + card->aneg_count = 0; + card->medium = BCM54XX_COPPER; + spider_net_setup_aneg(card); + if (card->phy.def->phy_id) + mod_timer(&card->aneg_timer, jiffies + SPIDER_NET_ANEG_TIMER); + + result = spider_net_init_chain(card, &card->tx_chain); + if (result) + goto alloc_tx_failed; + card->low_watermark = NULL; + + result = spider_net_init_chain(card, &card->rx_chain); + if (result) + goto alloc_rx_failed; + + /* Allocate rx skbs */ + result = spider_net_alloc_rx_skbs(card); + if (result) + goto alloc_skbs_failed; + + spider_net_set_multi(netdev); + + /* further enhancement: setup hw vlan, if needed */ + + result = -EBUSY; + if (request_irq(netdev->irq, spider_net_interrupt, + IRQF_SHARED, netdev->name, netdev)) + goto register_int_failed; + + spider_net_enable_card(card); + + netif_start_queue(netdev); + netif_carrier_on(netdev); + napi_enable(&card->napi); + + spider_net_enable_interrupts(card); + + return 0; + +register_int_failed: + spider_net_free_rx_chain_contents(card); +alloc_skbs_failed: + spider_net_free_chain(card, &card->rx_chain); +alloc_rx_failed: + spider_net_free_chain(card, &card->tx_chain); +alloc_tx_failed: + del_timer_sync(&card->aneg_timer); +init_firmware_failed: + return result; +} + +/** + * spider_net_link_phy + * @data: used for pointer to card structure + * + */ +static void spider_net_link_phy(unsigned long data) +{ + struct spider_net_card *card = (struct spider_net_card *)data; + struct mii_phy *phy = &card->phy; + + /* if link didn't come up after SPIDER_NET_ANEG_TIMEOUT tries, setup phy again */ + if (card->aneg_count > SPIDER_NET_ANEG_TIMEOUT) { + + pr_debug("%s: link is down trying to bring it up\n", + card->netdev->name); + + switch (card->medium) { + case BCM54XX_COPPER: + /* enable fiber with autonegotiation first */ + if (phy->def->ops->enable_fiber) + phy->def->ops->enable_fiber(phy, 1); + card->medium = BCM54XX_FIBER; + break; + + case BCM54XX_FIBER: + /* fiber didn't come up, try to disable fiber autoneg */ + if (phy->def->ops->enable_fiber) + phy->def->ops->enable_fiber(phy, 0); + card->medium = BCM54XX_UNKNOWN; + break; + + case BCM54XX_UNKNOWN: + /* copper, fiber with and without failed, + * retry from beginning */ + spider_net_setup_aneg(card); + card->medium = BCM54XX_COPPER; + break; + } + + card->aneg_count = 0; + mod_timer(&card->aneg_timer, jiffies + SPIDER_NET_ANEG_TIMER); + return; + } + + /* link still not up, try again later */ + if (!(phy->def->ops->poll_link(phy))) { + card->aneg_count++; + mod_timer(&card->aneg_timer, jiffies + SPIDER_NET_ANEG_TIMER); + return; + } + + /* link came up, get abilities */ + phy->def->ops->read_link(phy); + + spider_net_write_reg(card, SPIDER_NET_GMACST, + spider_net_read_reg(card, SPIDER_NET_GMACST)); + spider_net_write_reg(card, SPIDER_NET_GMACINTEN, 0x4); + + if (phy->speed == 1000) + spider_net_write_reg(card, SPIDER_NET_GMACMODE, 0x00000001); + else + spider_net_write_reg(card, SPIDER_NET_GMACMODE, 0); + + card->aneg_count = 0; + + pr_info("%s: link up, %i Mbps, %s-duplex %sautoneg.\n", + card->netdev->name, phy->speed, + phy->duplex == 1 ? "Full" : "Half", + phy->autoneg == 1 ? "" : "no "); +} + +/** + * spider_net_setup_phy - setup PHY + * @card: card structure + * + * returns 0 on success, <0 on failure + * + * spider_net_setup_phy is used as part of spider_net_probe. + **/ +static int +spider_net_setup_phy(struct spider_net_card *card) +{ + struct mii_phy *phy = &card->phy; + + spider_net_write_reg(card, SPIDER_NET_GDTDMASEL, + SPIDER_NET_DMASEL_VALUE); + spider_net_write_reg(card, SPIDER_NET_GPCCTRL, + SPIDER_NET_PHY_CTRL_VALUE); + + phy->dev = card->netdev; + phy->mdio_read = spider_net_read_phy; + phy->mdio_write = spider_net_write_phy; + + for (phy->mii_id = 1; phy->mii_id <= 31; phy->mii_id++) { + unsigned short id; + id = spider_net_read_phy(card->netdev, phy->mii_id, MII_BMSR); + if (id != 0x0000 && id != 0xffff) { + if (!sungem_phy_probe(phy, phy->mii_id)) { + pr_info("Found %s.\n", phy->def->name); + break; + } + } + } + + return 0; +} + +/** + * spider_net_workaround_rxramfull - work around firmware bug + * @card: card structure + * + * no return value + **/ +static void +spider_net_workaround_rxramfull(struct spider_net_card *card) +{ + int i, sequencer = 0; + + /* cancel reset */ + spider_net_write_reg(card, SPIDER_NET_CKRCTRL, + SPIDER_NET_CKRCTRL_RUN_VALUE); + + /* empty sequencer data */ + for (sequencer = 0; sequencer < SPIDER_NET_FIRMWARE_SEQS; + sequencer++) { + spider_net_write_reg(card, SPIDER_NET_GSnPRGADR + + sequencer * 8, 0x0); + for (i = 0; i < SPIDER_NET_FIRMWARE_SEQWORDS; i++) { + spider_net_write_reg(card, SPIDER_NET_GSnPRGDAT + + sequencer * 8, 0x0); + } + } + + /* set sequencer operation */ + spider_net_write_reg(card, SPIDER_NET_GSINIT, 0x000000fe); + + /* reset */ + spider_net_write_reg(card, SPIDER_NET_CKRCTRL, + SPIDER_NET_CKRCTRL_STOP_VALUE); +} + +/** + * spider_net_stop - called upon ifconfig down + * @netdev: interface device structure + * + * always returns 0 + */ +int +spider_net_stop(struct net_device *netdev) +{ + struct spider_net_card *card = netdev_priv(netdev); + + napi_disable(&card->napi); + netif_carrier_off(netdev); + netif_stop_queue(netdev); + del_timer_sync(&card->tx_timer); + del_timer_sync(&card->aneg_timer); + + spider_net_disable_interrupts(card); + + free_irq(netdev->irq, netdev); + + spider_net_write_reg(card, SPIDER_NET_GDTDMACCNTR, + SPIDER_NET_DMA_TX_FEND_VALUE); + + /* turn off DMA, force end */ + spider_net_disable_rxdmac(card); + + /* release chains */ + spider_net_release_tx_chain(card, 1); + spider_net_free_rx_chain_contents(card); + + spider_net_free_chain(card, &card->tx_chain); + spider_net_free_chain(card, &card->rx_chain); + + return 0; +} + +/** + * spider_net_tx_timeout_task - task scheduled by the watchdog timeout + * function (to be called not under interrupt status) + * @data: data, is interface device structure + * + * called as task when tx hangs, resets interface (if interface is up) + */ +static void +spider_net_tx_timeout_task(struct work_struct *work) +{ + struct spider_net_card *card = + container_of(work, struct spider_net_card, tx_timeout_task); + struct net_device *netdev = card->netdev; + + if (!(netdev->flags & IFF_UP)) + goto out; + + netif_device_detach(netdev); + spider_net_stop(netdev); + + spider_net_workaround_rxramfull(card); + spider_net_init_card(card); + + if (spider_net_setup_phy(card)) + goto out; + + spider_net_open(netdev); + spider_net_kick_tx_dma(card); + netif_device_attach(netdev); + +out: + atomic_dec(&card->tx_timeout_task_counter); +} + +/** + * spider_net_tx_timeout - called when the tx timeout watchdog kicks in. + * @netdev: interface device structure + * + * called, if tx hangs. Schedules a task that resets the interface + */ +static void +spider_net_tx_timeout(struct net_device *netdev) +{ + struct spider_net_card *card; + + card = netdev_priv(netdev); + atomic_inc(&card->tx_timeout_task_counter); + if (netdev->flags & IFF_UP) + schedule_work(&card->tx_timeout_task); + else + atomic_dec(&card->tx_timeout_task_counter); + card->spider_stats.tx_timeouts++; +} + +static const struct net_device_ops spider_net_ops = { + .ndo_open = spider_net_open, + .ndo_stop = spider_net_stop, + .ndo_start_xmit = spider_net_xmit, + .ndo_set_rx_mode = spider_net_set_multi, + .ndo_set_mac_address = spider_net_set_mac, + .ndo_change_mtu = spider_net_change_mtu, + .ndo_do_ioctl = spider_net_do_ioctl, + .ndo_tx_timeout = spider_net_tx_timeout, + .ndo_validate_addr = eth_validate_addr, + /* HW VLAN */ +#ifdef CONFIG_NET_POLL_CONTROLLER + /* poll controller */ + .ndo_poll_controller = spider_net_poll_controller, +#endif /* CONFIG_NET_POLL_CONTROLLER */ +}; + +/** + * spider_net_setup_netdev_ops - initialization of net_device operations + * @netdev: net_device structure + * + * fills out function pointers in the net_device structure + */ +static void +spider_net_setup_netdev_ops(struct net_device *netdev) +{ + netdev->netdev_ops = &spider_net_ops; + netdev->watchdog_timeo = SPIDER_NET_WATCHDOG_TIMEOUT; + /* ethtool ops */ + netdev->ethtool_ops = &spider_net_ethtool_ops; +} + +/** + * spider_net_setup_netdev - initialization of net_device + * @card: card structure + * + * Returns 0 on success or <0 on failure + * + * spider_net_setup_netdev initializes the net_device structure + **/ +static int +spider_net_setup_netdev(struct spider_net_card *card) +{ + int result; + struct net_device *netdev = card->netdev; + struct device_node *dn; + struct sockaddr addr; + const u8 *mac; + + SET_NETDEV_DEV(netdev, &card->pdev->dev); + + pci_set_drvdata(card->pdev, netdev); + + init_timer(&card->tx_timer); + card->tx_timer.function = + (void (*)(unsigned long)) spider_net_cleanup_tx_ring; + card->tx_timer.data = (unsigned long) card; + netdev->irq = card->pdev->irq; + + card->aneg_count = 0; + init_timer(&card->aneg_timer); + card->aneg_timer.function = spider_net_link_phy; + card->aneg_timer.data = (unsigned long) card; + + netif_napi_add(netdev, &card->napi, + spider_net_poll, SPIDER_NET_NAPI_WEIGHT); + + spider_net_setup_netdev_ops(netdev); + + netdev->hw_features = NETIF_F_RXCSUM | NETIF_F_IP_CSUM; + if (SPIDER_NET_RX_CSUM_DEFAULT) + netdev->features |= NETIF_F_RXCSUM; + netdev->features |= NETIF_F_IP_CSUM | NETIF_F_LLTX; + /* some time: NETIF_F_HW_VLAN_CTAG_TX | NETIF_F_HW_VLAN_CTAG_RX | + * NETIF_F_HW_VLAN_CTAG_FILTER */ + + netdev->irq = card->pdev->irq; + card->num_rx_ints = 0; + card->ignore_rx_ramfull = 0; + + dn = pci_device_to_OF_node(card->pdev); + if (!dn) + return -EIO; + + mac = of_get_property(dn, "local-mac-address", NULL); + if (!mac) + return -EIO; + memcpy(addr.sa_data, mac, ETH_ALEN); + + result = spider_net_set_mac(netdev, &addr); + if ((result) && (netif_msg_probe(card))) + dev_err(&card->netdev->dev, + "Failed to set MAC address: %i\n", result); + + result = register_netdev(netdev); + if (result) { + if (netif_msg_probe(card)) + dev_err(&card->netdev->dev, + "Couldn't register net_device: %i\n", result); + return result; + } + + if (netif_msg_probe(card)) + pr_info("Initialized device %s.\n", netdev->name); + + return 0; +} + +/** + * spider_net_alloc_card - allocates net_device and card structure + * + * returns the card structure or NULL in case of errors + * + * the card and net_device structures are linked to each other + */ +static struct spider_net_card * +spider_net_alloc_card(void) +{ + struct net_device *netdev; + struct spider_net_card *card; + size_t alloc_size; + + alloc_size = sizeof(struct spider_net_card) + + (tx_descriptors + rx_descriptors) * sizeof(struct spider_net_descr); + netdev = alloc_etherdev(alloc_size); + if (!netdev) + return NULL; + + card = netdev_priv(netdev); + card->netdev = netdev; + card->msg_enable = SPIDER_NET_DEFAULT_MSG; + INIT_WORK(&card->tx_timeout_task, spider_net_tx_timeout_task); + init_waitqueue_head(&card->waitq); + atomic_set(&card->tx_timeout_task_counter, 0); + + card->rx_chain.num_desc = rx_descriptors; + card->rx_chain.ring = card->darray; + card->tx_chain.num_desc = tx_descriptors; + card->tx_chain.ring = card->darray + rx_descriptors; + + return card; +} + +/** + * spider_net_undo_pci_setup - releases PCI ressources + * @card: card structure + * + * spider_net_undo_pci_setup releases the mapped regions + */ +static void +spider_net_undo_pci_setup(struct spider_net_card *card) +{ + iounmap(card->regs); + pci_release_regions(card->pdev); +} + +/** + * spider_net_setup_pci_dev - sets up the device in terms of PCI operations + * @pdev: PCI device + * + * Returns the card structure or NULL if any errors occur + * + * spider_net_setup_pci_dev initializes pdev and together with the + * functions called in spider_net_open configures the device so that + * data can be transferred over it + * The net_device structure is attached to the card structure, if the + * function returns without error. + **/ +static struct spider_net_card * +spider_net_setup_pci_dev(struct pci_dev *pdev) +{ + struct spider_net_card *card; + unsigned long mmio_start, mmio_len; + + if (pci_enable_device(pdev)) { + dev_err(&pdev->dev, "Couldn't enable PCI device\n"); + return NULL; + } + + if (!(pci_resource_flags(pdev, 0) & IORESOURCE_MEM)) { + dev_err(&pdev->dev, + "Couldn't find proper PCI device base address.\n"); + goto out_disable_dev; + } + + if (pci_request_regions(pdev, spider_net_driver_name)) { + dev_err(&pdev->dev, + "Couldn't obtain PCI resources, aborting.\n"); + goto out_disable_dev; + } + + pci_set_master(pdev); + + card = spider_net_alloc_card(); + if (!card) { + dev_err(&pdev->dev, + "Couldn't allocate net_device structure, aborting.\n"); + goto out_release_regions; + } + card->pdev = pdev; + + /* fetch base address and length of first resource */ + mmio_start = pci_resource_start(pdev, 0); + mmio_len = pci_resource_len(pdev, 0); + + card->netdev->mem_start = mmio_start; + card->netdev->mem_end = mmio_start + mmio_len; + card->regs = ioremap(mmio_start, mmio_len); + + if (!card->regs) { + dev_err(&pdev->dev, + "Couldn't obtain PCI resources, aborting.\n"); + goto out_release_regions; + } + + return card; + +out_release_regions: + pci_release_regions(pdev); +out_disable_dev: + pci_disable_device(pdev); + return NULL; +} + +/** + * spider_net_probe - initialization of a device + * @pdev: PCI device + * @ent: entry in the device id list + * + * Returns 0 on success, <0 on failure + * + * spider_net_probe initializes pdev and registers a net_device + * structure for it. After that, the device can be ifconfig'ed up + **/ +static int +spider_net_probe(struct pci_dev *pdev, const struct pci_device_id *ent) +{ + int err = -EIO; + struct spider_net_card *card; + + card = spider_net_setup_pci_dev(pdev); + if (!card) + goto out; + + spider_net_workaround_rxramfull(card); + spider_net_init_card(card); + + err = spider_net_setup_phy(card); + if (err) + goto out_undo_pci; + + err = spider_net_setup_netdev(card); + if (err) + goto out_undo_pci; + + return 0; + +out_undo_pci: + spider_net_undo_pci_setup(card); + free_netdev(card->netdev); +out: + return err; +} + +/** + * spider_net_remove - removal of a device + * @pdev: PCI device + * + * Returns 0 on success, <0 on failure + * + * spider_net_remove is called to remove the device and unregisters the + * net_device + **/ +static void +spider_net_remove(struct pci_dev *pdev) +{ + struct net_device *netdev; + struct spider_net_card *card; + + netdev = pci_get_drvdata(pdev); + card = netdev_priv(netdev); + + wait_event(card->waitq, + atomic_read(&card->tx_timeout_task_counter) == 0); + + unregister_netdev(netdev); + + /* switch off card */ + spider_net_write_reg(card, SPIDER_NET_CKRCTRL, + SPIDER_NET_CKRCTRL_STOP_VALUE); + spider_net_write_reg(card, SPIDER_NET_CKRCTRL, + SPIDER_NET_CKRCTRL_RUN_VALUE); + + spider_net_undo_pci_setup(card); + free_netdev(netdev); +} + +static struct pci_driver spider_net_driver = { + .name = spider_net_driver_name, + .id_table = spider_net_pci_tbl, + .probe = spider_net_probe, + .remove = spider_net_remove +}; + +/** + * spider_net_init - init function when the driver is loaded + * + * spider_net_init registers the device driver + */ +static int __init spider_net_init(void) +{ + printk(KERN_INFO "Spidernet version %s.\n", VERSION); + + if (rx_descriptors < SPIDER_NET_RX_DESCRIPTORS_MIN) { + rx_descriptors = SPIDER_NET_RX_DESCRIPTORS_MIN; + pr_info("adjusting rx descriptors to %i.\n", rx_descriptors); + } + if (rx_descriptors > SPIDER_NET_RX_DESCRIPTORS_MAX) { + rx_descriptors = SPIDER_NET_RX_DESCRIPTORS_MAX; + pr_info("adjusting rx descriptors to %i.\n", rx_descriptors); + } + if (tx_descriptors < SPIDER_NET_TX_DESCRIPTORS_MIN) { + tx_descriptors = SPIDER_NET_TX_DESCRIPTORS_MIN; + pr_info("adjusting tx descriptors to %i.\n", tx_descriptors); + } + if (tx_descriptors > SPIDER_NET_TX_DESCRIPTORS_MAX) { + tx_descriptors = SPIDER_NET_TX_DESCRIPTORS_MAX; + pr_info("adjusting tx descriptors to %i.\n", tx_descriptors); + } + + return pci_register_driver(&spider_net_driver); +} + +/** + * spider_net_cleanup - exit function when driver is unloaded + * + * spider_net_cleanup unregisters the device driver + */ +static void __exit spider_net_cleanup(void) +{ + pci_unregister_driver(&spider_net_driver); +} + +module_init(spider_net_init); +module_exit(spider_net_cleanup); |