diff options
Diffstat (limited to 'kernel/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c')
-rw-r--r-- | kernel/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c | 221 |
1 files changed, 59 insertions, 162 deletions
diff --git a/kernel/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c b/kernel/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c index 68aec5c46..d02691ba3 100644 --- a/kernel/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c +++ b/kernel/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c @@ -28,29 +28,11 @@ #include <linux/of.h> #include <linux/of_net.h> #include <linux/of_device.h> +#include <linux/of_mdio.h> #include "stmmac.h" #include "stmmac_platform.h" -static const struct of_device_id stmmac_dt_ids[] = { - /* SoC specific glue layers should come before generic bindings */ - { .compatible = "rockchip,rk3288-gmac", .data = &rk3288_gmac_data}, - { .compatible = "amlogic,meson6-dwmac", .data = &meson6_dwmac_data}, - { .compatible = "allwinner,sun7i-a20-gmac", .data = &sun7i_gmac_data}, - { .compatible = "st,stih415-dwmac", .data = &stih4xx_dwmac_data}, - { .compatible = "st,stih416-dwmac", .data = &stih4xx_dwmac_data}, - { .compatible = "st,stid127-dwmac", .data = &stid127_dwmac_data}, - { .compatible = "st,stih407-dwmac", .data = &stih4xx_dwmac_data}, - { .compatible = "altr,socfpga-stmmac", .data = &socfpga_gmac_data }, - { .compatible = "st,spear600-gmac"}, - { .compatible = "snps,dwmac-3.610"}, - { .compatible = "snps,dwmac-3.70a"}, - { .compatible = "snps,dwmac-3.710"}, - { .compatible = "snps,dwmac"}, - { /* sentinel */ } -}; -MODULE_DEVICE_TABLE(of, stmmac_dt_ids); - #ifdef CONFIG_OF /** @@ -122,37 +104,16 @@ static int dwmac1000_validate_ucast_entries(int ucast_entries) * this function is to read the driver parameters from device-tree and * set some private fields that will be used by the main at runtime. */ -static int stmmac_probe_config_dt(struct platform_device *pdev, - struct plat_stmmacenet_data *plat, - const char **mac) +struct plat_stmmacenet_data * +stmmac_probe_config_dt(struct platform_device *pdev, const char **mac) { struct device_node *np = pdev->dev.of_node; + struct plat_stmmacenet_data *plat; struct stmmac_dma_cfg *dma_cfg; - const struct of_device_id *device; - - if (!np) - return -ENODEV; - - device = of_match_device(stmmac_dt_ids, &pdev->dev); - if (!device) - return -ENODEV; - - if (device->data) { - const struct stmmac_of_data *data = device->data; - plat->has_gmac = data->has_gmac; - plat->enh_desc = data->enh_desc; - plat->tx_coe = data->tx_coe; - plat->rx_coe = data->rx_coe; - plat->bugged_jumbo = data->bugged_jumbo; - plat->pmt = data->pmt; - plat->riwt_off = data->riwt_off; - plat->fix_mac_speed = data->fix_mac_speed; - plat->bus_setup = data->bus_setup; - plat->setup = data->setup; - plat->free = data->free; - plat->init = data->init; - plat->exit = data->exit; - } + + plat = devm_kzalloc(&pdev->dev, sizeof(*plat), GFP_KERNEL); + if (!plat) + return ERR_PTR(-ENOMEM); *mac = of_get_mac_address(np); plat->interface = of_get_phy_mode(np); @@ -168,13 +129,24 @@ static int stmmac_probe_config_dt(struct platform_device *pdev, /* Default to phy auto-detection */ plat->phy_addr = -1; + /* If we find a phy-handle property, use it as the PHY */ + plat->phy_node = of_parse_phandle(np, "phy-handle", 0); + + /* If phy-handle is not specified, check if we have a fixed-phy */ + if (!plat->phy_node && of_phy_is_fixed_link(np)) { + if ((of_phy_register_fixed_link(np) < 0)) + return ERR_PTR(-ENODEV); + + plat->phy_node = of_node_get(np); + } + /* "snps,phy-addr" is not a standard property. Mark it as deprecated * and warn of its use. Remove this when phy node support is added. */ if (of_property_read_u32(np, "snps,phy-addr", &plat->phy_addr) == 0) dev_warn(&pdev->dev, "snps,phy-addr property is deprecated\n"); - if (plat->phy_bus_name) + if (plat->phy_node || plat->phy_bus_name) plat->mdio_bus_data = NULL; else plat->mdio_bus_data = @@ -194,6 +166,12 @@ static int stmmac_probe_config_dt(struct platform_device *pdev, */ plat->maxmtu = JUMBO_LEN; + /* Set default value for multicast hash bins */ + plat->multicast_filter_bins = HASH_TABLE_SIZE; + + /* Set default value for unicast filter entries */ + plat->unicast_filter_entries = 1; + /* * Currently only the properties needed on SPEAr600 * are provided. All other properties should be added @@ -232,8 +210,10 @@ static int stmmac_probe_config_dt(struct platform_device *pdev, if (of_find_property(np, "snps,pbl", NULL)) { dma_cfg = devm_kzalloc(&pdev->dev, sizeof(*dma_cfg), GFP_KERNEL); - if (!dma_cfg) - return -ENOMEM; + if (!dma_cfg) { + of_node_put(np); + return ERR_PTR(-ENOMEM); + } plat->dma_cfg = dma_cfg; of_property_read_u32(np, "snps,pbl", &dma_cfg->pbl); dma_cfg->fixed_burst = @@ -250,45 +230,34 @@ static int stmmac_probe_config_dt(struct platform_device *pdev, pr_warn("force_sf_dma_mode is ignored if force_thresh_dma_mode is set."); } - return 0; + return plat; } #else -static int stmmac_probe_config_dt(struct platform_device *pdev, - struct plat_stmmacenet_data *plat, - const char **mac) +struct plat_stmmacenet_data * +stmmac_probe_config_dt(struct platform_device *pdev, const char **mac) { - return -ENOSYS; + return ERR_PTR(-ENOSYS); } #endif /* CONFIG_OF */ +EXPORT_SYMBOL_GPL(stmmac_probe_config_dt); -/** - * stmmac_pltfr_probe - platform driver probe. - * @pdev: platform device pointer - * Description: platform_device probe function. It is to allocate - * the necessary platform resources, invoke custom helper (if required) and - * invoke the main probe function. - */ -static int stmmac_pltfr_probe(struct platform_device *pdev) +int stmmac_get_platform_resources(struct platform_device *pdev, + struct stmmac_resources *stmmac_res) { - int ret = 0; struct resource *res; - struct device *dev = &pdev->dev; - void __iomem *addr = NULL; - struct stmmac_priv *priv = NULL; - struct plat_stmmacenet_data *plat_dat = NULL; - const char *mac = NULL; - int irq, wol_irq, lpi_irq; + + memset(stmmac_res, 0, sizeof(*stmmac_res)); /* Get IRQ information early to have an ability to ask for deferred * probe if needed before we went too far with resource allocation. */ - irq = platform_get_irq_byname(pdev, "macirq"); - if (irq < 0) { - if (irq != -EPROBE_DEFER) { - dev_err(dev, + stmmac_res->irq = platform_get_irq_byname(pdev, "macirq"); + if (stmmac_res->irq < 0) { + if (stmmac_res->irq != -EPROBE_DEFER) { + dev_err(&pdev->dev, "MAC IRQ configuration information not found\n"); } - return irq; + return stmmac_res->irq; } /* On some platforms e.g. SPEAr the wake up irq differs from the mac irq @@ -298,82 +267,23 @@ static int stmmac_pltfr_probe(struct platform_device *pdev) * In case the wake up interrupt is not passed from the platform * so the driver will continue to use the mac irq (ndev->irq) */ - wol_irq = platform_get_irq_byname(pdev, "eth_wake_irq"); - if (wol_irq < 0) { - if (wol_irq == -EPROBE_DEFER) + stmmac_res->wol_irq = platform_get_irq_byname(pdev, "eth_wake_irq"); + if (stmmac_res->wol_irq < 0) { + if (stmmac_res->wol_irq == -EPROBE_DEFER) return -EPROBE_DEFER; - wol_irq = irq; + stmmac_res->wol_irq = stmmac_res->irq; } - lpi_irq = platform_get_irq_byname(pdev, "eth_lpi"); - if (lpi_irq == -EPROBE_DEFER) + stmmac_res->lpi_irq = platform_get_irq_byname(pdev, "eth_lpi"); + if (stmmac_res->lpi_irq == -EPROBE_DEFER) return -EPROBE_DEFER; res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - addr = devm_ioremap_resource(dev, res); - if (IS_ERR(addr)) - return PTR_ERR(addr); - - plat_dat = dev_get_platdata(&pdev->dev); - - if (!plat_dat) - plat_dat = devm_kzalloc(&pdev->dev, - sizeof(struct plat_stmmacenet_data), - GFP_KERNEL); - if (!plat_dat) { - pr_err("%s: ERROR: no memory", __func__); - return -ENOMEM; - } - - /* Set default value for multicast hash bins */ - plat_dat->multicast_filter_bins = HASH_TABLE_SIZE; + stmmac_res->addr = devm_ioremap_resource(&pdev->dev, res); - /* Set default value for unicast filter entries */ - plat_dat->unicast_filter_entries = 1; - - if (pdev->dev.of_node) { - ret = stmmac_probe_config_dt(pdev, plat_dat, &mac); - if (ret) { - pr_err("%s: main dt probe failed", __func__); - return ret; - } - } - - /* Custom setup (if needed) */ - if (plat_dat->setup) { - plat_dat->bsp_priv = plat_dat->setup(pdev); - if (IS_ERR(plat_dat->bsp_priv)) - return PTR_ERR(plat_dat->bsp_priv); - } - - /* Custom initialisation (if needed)*/ - if (plat_dat->init) { - ret = plat_dat->init(pdev, plat_dat->bsp_priv); - if (unlikely(ret)) - return ret; - } - - priv = stmmac_dvr_probe(&(pdev->dev), plat_dat, addr); - if (IS_ERR(priv)) { - pr_err("%s: main driver probe failed", __func__); - return PTR_ERR(priv); - } - - /* Copy IRQ values to priv structure which is now avaialble */ - priv->dev->irq = irq; - priv->wol_irq = wol_irq; - priv->lpi_irq = lpi_irq; - - /* Get MAC address if available (DT) */ - if (mac) - memcpy(priv->dev->dev_addr, mac, ETH_ALEN); - - platform_set_drvdata(pdev, priv->dev); - - pr_debug("STMMAC platform driver registration completed"); - - return 0; + return PTR_ERR_OR_ZERO(stmmac_res->addr); } +EXPORT_SYMBOL_GPL(stmmac_get_platform_resources); /** * stmmac_pltfr_remove @@ -381,7 +291,7 @@ static int stmmac_pltfr_probe(struct platform_device *pdev) * Description: this function calls the main to free the net resources * and calls the platforms hook and release the resources (e.g. mem). */ -static int stmmac_pltfr_remove(struct platform_device *pdev) +int stmmac_pltfr_remove(struct platform_device *pdev) { struct net_device *ndev = platform_get_drvdata(pdev); struct stmmac_priv *priv = netdev_priv(ndev); @@ -390,11 +300,9 @@ static int stmmac_pltfr_remove(struct platform_device *pdev) if (priv->plat->exit) priv->plat->exit(pdev, priv->plat->bsp_priv); - if (priv->plat->free) - priv->plat->free(pdev, priv->plat->bsp_priv); - return ret; } +EXPORT_SYMBOL_GPL(stmmac_pltfr_remove); #ifdef CONFIG_PM_SLEEP /** @@ -438,21 +346,10 @@ static int stmmac_pltfr_resume(struct device *dev) } #endif /* CONFIG_PM_SLEEP */ -static SIMPLE_DEV_PM_OPS(stmmac_pltfr_pm_ops, - stmmac_pltfr_suspend, stmmac_pltfr_resume); - -static struct platform_driver stmmac_pltfr_driver = { - .probe = stmmac_pltfr_probe, - .remove = stmmac_pltfr_remove, - .driver = { - .name = STMMAC_RESOURCE_NAME, - .pm = &stmmac_pltfr_pm_ops, - .of_match_table = of_match_ptr(stmmac_dt_ids), - }, -}; - -module_platform_driver(stmmac_pltfr_driver); +SIMPLE_DEV_PM_OPS(stmmac_pltfr_pm_ops, stmmac_pltfr_suspend, + stmmac_pltfr_resume); +EXPORT_SYMBOL_GPL(stmmac_pltfr_pm_ops); -MODULE_DESCRIPTION("STMMAC 10/100/1000 Ethernet PLATFORM driver"); +MODULE_DESCRIPTION("STMMAC 10/100/1000 Ethernet platform support"); MODULE_AUTHOR("Giuseppe Cavallaro <peppe.cavallaro@st.com>"); MODULE_LICENSE("GPL"); |