diff options
Diffstat (limited to 'kernel/drivers/net/ethernet/stmicro/stmmac/stmmac_pci.c')
-rw-r--r-- | kernel/drivers/net/ethernet/stmicro/stmmac/stmmac_pci.c | 294 |
1 files changed, 294 insertions, 0 deletions
diff --git a/kernel/drivers/net/ethernet/stmicro/stmmac/stmmac_pci.c b/kernel/drivers/net/ethernet/stmicro/stmmac/stmmac_pci.c new file mode 100644 index 000000000..3bca90871 --- /dev/null +++ b/kernel/drivers/net/ethernet/stmicro/stmmac/stmmac_pci.c @@ -0,0 +1,294 @@ +/******************************************************************************* + This contains the functions to handle the pci driver. + + Copyright (C) 2011-2012 Vayavya Labs Pvt Ltd + + This program is free software; you can redistribute it and/or modify it + under the terms and conditions of the GNU General Public License, + version 2, as published by the Free Software Foundation. + + This program is distributed in the hope it will be useful, but WITHOUT + ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + more details. + + You should have received a copy of the GNU General Public License along with + this program; if not, write to the Free Software Foundation, Inc., + 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + + The full GNU General Public License is included in this distribution in + the file called "COPYING". + + Author: Rayagond Kokatanur <rayagond@vayavyalabs.com> + Author: Giuseppe Cavallaro <peppe.cavallaro@st.com> +*******************************************************************************/ + +#include <linux/pci.h> +#include <linux/dmi.h> + +#include "stmmac.h" + +/* + * This struct is used to associate PCI Function of MAC controller on a board, + * discovered via DMI, with the address of PHY connected to the MAC. The + * negative value of the address means that MAC controller is not connected + * with PHY. + */ +struct stmmac_pci_dmi_data { + const char *name; + unsigned int func; + int phy_addr; +}; + +struct stmmac_pci_info { + struct pci_dev *pdev; + int (*setup)(struct plat_stmmacenet_data *plat, + struct stmmac_pci_info *info); + struct stmmac_pci_dmi_data *dmi; +}; + +static int stmmac_pci_find_phy_addr(struct stmmac_pci_info *info) +{ + const char *name = dmi_get_system_info(DMI_BOARD_NAME); + unsigned int func = PCI_FUNC(info->pdev->devfn); + struct stmmac_pci_dmi_data *dmi; + + /* + * Galileo boards with old firmware don't support DMI. We always return + * 1 here, so at least first found MAC controller would be probed. + */ + if (!name) + return 1; + + for (dmi = info->dmi; dmi->name && *dmi->name; dmi++) { + if (!strcmp(dmi->name, name) && dmi->func == func) + return dmi->phy_addr; + } + + return -ENODEV; +} + +static void stmmac_default_data(struct plat_stmmacenet_data *plat) +{ + plat->bus_id = 1; + plat->phy_addr = 0; + plat->interface = PHY_INTERFACE_MODE_GMII; + plat->clk_csr = 2; /* clk_csr_i = 20-35MHz & MDC = clk_csr_i/16 */ + plat->has_gmac = 1; + plat->force_sf_dma_mode = 1; + + plat->mdio_bus_data->phy_reset = NULL; + plat->mdio_bus_data->phy_mask = 0; + + plat->dma_cfg->pbl = 32; + plat->dma_cfg->burst_len = DMA_AXI_BLEN_256; + + /* Set default value for multicast hash bins */ + plat->multicast_filter_bins = HASH_TABLE_SIZE; + + /* Set default value for unicast filter entries */ + plat->unicast_filter_entries = 1; +} + +static int quark_default_data(struct plat_stmmacenet_data *plat, + struct stmmac_pci_info *info) +{ + struct pci_dev *pdev = info->pdev; + int ret; + + /* + * Refuse to load the driver and register net device if MAC controller + * does not connect to any PHY interface. + */ + ret = stmmac_pci_find_phy_addr(info); + if (ret < 0) + return ret; + + plat->bus_id = PCI_DEVID(pdev->bus->number, pdev->devfn); + plat->phy_addr = ret; + plat->interface = PHY_INTERFACE_MODE_RMII; + plat->clk_csr = 2; + plat->has_gmac = 1; + plat->force_sf_dma_mode = 1; + + plat->mdio_bus_data->phy_reset = NULL; + plat->mdio_bus_data->phy_mask = 0; + + plat->dma_cfg->pbl = 16; + plat->dma_cfg->burst_len = DMA_AXI_BLEN_256; + plat->dma_cfg->fixed_burst = 1; + + /* Set default value for multicast hash bins */ + plat->multicast_filter_bins = HASH_TABLE_SIZE; + + /* Set default value for unicast filter entries */ + plat->unicast_filter_entries = 1; + + return 0; +} + +static struct stmmac_pci_dmi_data quark_pci_dmi_data[] = { + { + .name = "Galileo", + .func = 6, + .phy_addr = 1, + }, + { + .name = "GalileoGen2", + .func = 6, + .phy_addr = 1, + }, + {} +}; + +static struct stmmac_pci_info quark_pci_info = { + .setup = quark_default_data, + .dmi = quark_pci_dmi_data, +}; + +/** + * stmmac_pci_probe + * + * @pdev: pci device pointer + * @id: pointer to table of device id/id's. + * + * Description: This probing function gets called for all PCI devices which + * match the ID table and are not "owned" by other driver yet. This function + * gets passed a "struct pci_dev *" for each device whose entry in the ID table + * matches the device. The probe functions returns zero when the driver choose + * to take "ownership" of the device or an error code(-ve no) otherwise. + */ +static int stmmac_pci_probe(struct pci_dev *pdev, + const struct pci_device_id *id) +{ + struct stmmac_pci_info *info = (struct stmmac_pci_info *)id->driver_data; + struct plat_stmmacenet_data *plat; + struct stmmac_priv *priv; + int i; + int ret; + + plat = devm_kzalloc(&pdev->dev, sizeof(*plat), GFP_KERNEL); + if (!plat) + return -ENOMEM; + + plat->mdio_bus_data = devm_kzalloc(&pdev->dev, + sizeof(*plat->mdio_bus_data), + GFP_KERNEL); + if (!plat->mdio_bus_data) + return -ENOMEM; + + plat->dma_cfg = devm_kzalloc(&pdev->dev, sizeof(*plat->dma_cfg), + GFP_KERNEL); + if (!plat->dma_cfg) + return -ENOMEM; + + /* Enable pci device */ + ret = pcim_enable_device(pdev); + if (ret) { + dev_err(&pdev->dev, "%s: ERROR: failed to enable device\n", + __func__); + return ret; + } + + /* Get the base address of device */ + for (i = 0; i <= PCI_STD_RESOURCE_END; i++) { + if (pci_resource_len(pdev, i) == 0) + continue; + ret = pcim_iomap_regions(pdev, BIT(i), pci_name(pdev)); + if (ret) + return ret; + break; + } + + pci_set_master(pdev); + + if (info) { + info->pdev = pdev; + if (info->setup) { + ret = info->setup(plat, info); + if (ret) + return ret; + } + } else + stmmac_default_data(plat); + + pci_enable_msi(pdev); + + priv = stmmac_dvr_probe(&pdev->dev, plat, pcim_iomap_table(pdev)[i]); + if (IS_ERR(priv)) { + dev_err(&pdev->dev, "%s: main driver probe failed\n", __func__); + return PTR_ERR(priv); + } + priv->dev->irq = pdev->irq; + priv->wol_irq = pdev->irq; + + pci_set_drvdata(pdev, priv->dev); + + dev_dbg(&pdev->dev, "STMMAC PCI driver registration completed\n"); + + return 0; +} + +/** + * stmmac_pci_remove + * + * @pdev: platform device pointer + * Description: this function calls the main to free the net resources + * and releases the PCI resources. + */ +static void stmmac_pci_remove(struct pci_dev *pdev) +{ + struct net_device *ndev = pci_get_drvdata(pdev); + + stmmac_dvr_remove(ndev); +} + +#ifdef CONFIG_PM_SLEEP +static int stmmac_pci_suspend(struct device *dev) +{ + struct pci_dev *pdev = to_pci_dev(dev); + struct net_device *ndev = pci_get_drvdata(pdev); + + return stmmac_suspend(ndev); +} + +static int stmmac_pci_resume(struct device *dev) +{ + struct pci_dev *pdev = to_pci_dev(dev); + struct net_device *ndev = pci_get_drvdata(pdev); + + return stmmac_resume(ndev); +} +#endif + +static SIMPLE_DEV_PM_OPS(stmmac_pm_ops, stmmac_pci_suspend, stmmac_pci_resume); + +#define STMMAC_VENDOR_ID 0x700 +#define STMMAC_QUARK_ID 0x0937 +#define STMMAC_DEVICE_ID 0x1108 + +static const struct pci_device_id stmmac_id_table[] = { + {PCI_DEVICE(STMMAC_VENDOR_ID, STMMAC_DEVICE_ID)}, + {PCI_DEVICE(PCI_VENDOR_ID_STMICRO, PCI_DEVICE_ID_STMICRO_MAC)}, + {PCI_VDEVICE(INTEL, STMMAC_QUARK_ID), (kernel_ulong_t)&quark_pci_info}, + {} +}; + +MODULE_DEVICE_TABLE(pci, stmmac_id_table); + +static struct pci_driver stmmac_pci_driver = { + .name = STMMAC_RESOURCE_NAME, + .id_table = stmmac_id_table, + .probe = stmmac_pci_probe, + .remove = stmmac_pci_remove, + .driver = { + .pm = &stmmac_pm_ops, + }, +}; + +module_pci_driver(stmmac_pci_driver); + +MODULE_DESCRIPTION("STMMAC 10/100/1000 Ethernet PCI driver"); +MODULE_AUTHOR("Rayagond Kokatanur <rayagond.kokatanur@vayavyalabs.com>"); +MODULE_AUTHOR("Giuseppe Cavallaro <peppe.cavallaro@st.com>"); +MODULE_LICENSE("GPL"); |