diff options
Diffstat (limited to 'kernel/drivers/net/ethernet/smsc/smsc911x.c')
| -rw-r--r-- | kernel/drivers/net/ethernet/smsc/smsc911x.c | 2681 |
1 files changed, 2681 insertions, 0 deletions
diff --git a/kernel/drivers/net/ethernet/smsc/smsc911x.c b/kernel/drivers/net/ethernet/smsc/smsc911x.c new file mode 100644 index 000000000..959aeeade --- /dev/null +++ b/kernel/drivers/net/ethernet/smsc/smsc911x.c @@ -0,0 +1,2681 @@ +/*************************************************************************** + * + * Copyright (C) 2004-2008 SMSC + * Copyright (C) 2005-2008 ARM + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see <http://www.gnu.org/licenses/>. + * + *************************************************************************** + * Rewritten, heavily based on smsc911x simple driver by SMSC. + * Partly uses io macros from smc91x.c by Nicolas Pitre + * + * Supported devices: + * LAN9115, LAN9116, LAN9117, LAN9118 + * LAN9215, LAN9216, LAN9217, LAN9218 + * LAN9210, LAN9211 + * LAN9220, LAN9221 + * LAN89218 + * + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/crc32.h> +#include <linux/clk.h> +#include <linux/delay.h> +#include <linux/errno.h> +#include <linux/etherdevice.h> +#include <linux/ethtool.h> +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/ioport.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/netdevice.h> +#include <linux/platform_device.h> +#include <linux/regulator/consumer.h> +#include <linux/sched.h> +#include <linux/timer.h> +#include <linux/bug.h> +#include <linux/bitops.h> +#include <linux/irq.h> +#include <linux/io.h> +#include <linux/swab.h> +#include <linux/phy.h> +#include <linux/smsc911x.h> +#include <linux/device.h> +#include <linux/of.h> +#include <linux/of_device.h> +#include <linux/of_gpio.h> +#include <linux/of_net.h> +#include <linux/pm_runtime.h> + +#include "smsc911x.h" + +#define SMSC_CHIPNAME "smsc911x" +#define SMSC_MDIONAME "smsc911x-mdio" +#define SMSC_DRV_VERSION "2008-10-21" + +MODULE_LICENSE("GPL"); +MODULE_VERSION(SMSC_DRV_VERSION); +MODULE_ALIAS("platform:smsc911x"); + +#if USE_DEBUG > 0 +static int debug = 16; +#else +static int debug = 3; +#endif + +module_param(debug, int, 0); +MODULE_PARM_DESC(debug, "Debug level (0=none,...,16=all)"); + +struct smsc911x_data; + +struct smsc911x_ops { + u32 (*reg_read)(struct smsc911x_data *pdata, u32 reg); + void (*reg_write)(struct smsc911x_data *pdata, u32 reg, u32 val); + void (*rx_readfifo)(struct smsc911x_data *pdata, + unsigned int *buf, unsigned int wordcount); + void (*tx_writefifo)(struct smsc911x_data *pdata, + unsigned int *buf, unsigned int wordcount); +}; + +#define SMSC911X_NUM_SUPPLIES 2 + +struct smsc911x_data { + void __iomem *ioaddr; + + unsigned int idrev; + + /* used to decide which workarounds apply */ + unsigned int generation; + + /* device configuration (copied from platform_data during probe) */ + struct smsc911x_platform_config config; + + /* This needs to be acquired before calling any of below: + * smsc911x_mac_read(), smsc911x_mac_write() + */ + spinlock_t mac_lock; + + /* spinlock to ensure register accesses are serialised */ + spinlock_t dev_lock; + + struct phy_device *phy_dev; + struct mii_bus *mii_bus; + int phy_irq[PHY_MAX_ADDR]; + unsigned int using_extphy; + int last_duplex; + int last_carrier; + + u32 msg_enable; + unsigned int gpio_setting; + unsigned int gpio_orig_setting; + struct net_device *dev; + struct napi_struct napi; + + unsigned int software_irq_signal; + +#ifdef USE_PHY_WORK_AROUND +#define MIN_PACKET_SIZE (64) + char loopback_tx_pkt[MIN_PACKET_SIZE]; + char loopback_rx_pkt[MIN_PACKET_SIZE]; + unsigned int resetcount; +#endif + + /* Members for Multicast filter workaround */ + unsigned int multicast_update_pending; + unsigned int set_bits_mask; + unsigned int clear_bits_mask; + unsigned int hashhi; + unsigned int hashlo; + + /* register access functions */ + const struct smsc911x_ops *ops; + + /* regulators */ + struct regulator_bulk_data supplies[SMSC911X_NUM_SUPPLIES]; + + /* clock */ + struct clk *clk; +}; + +/* Easy access to information */ +#define __smsc_shift(pdata, reg) ((reg) << ((pdata)->config.shift)) + +static inline u32 __smsc911x_reg_read(struct smsc911x_data *pdata, u32 reg) +{ + if (pdata->config.flags & SMSC911X_USE_32BIT) + return readl(pdata->ioaddr + reg); + + if (pdata->config.flags & SMSC911X_USE_16BIT) + return ((readw(pdata->ioaddr + reg) & 0xFFFF) | + ((readw(pdata->ioaddr + reg + 2) & 0xFFFF) << 16)); + + BUG(); + return 0; +} + +static inline u32 +__smsc911x_reg_read_shift(struct smsc911x_data *pdata, u32 reg) +{ + if (pdata->config.flags & SMSC911X_USE_32BIT) + return readl(pdata->ioaddr + __smsc_shift(pdata, reg)); + + if (pdata->config.flags & SMSC911X_USE_16BIT) + return (readw(pdata->ioaddr + + __smsc_shift(pdata, reg)) & 0xFFFF) | + ((readw(pdata->ioaddr + + __smsc_shift(pdata, reg + 2)) & 0xFFFF) << 16); + + BUG(); + return 0; +} + +static inline u32 smsc911x_reg_read(struct smsc911x_data *pdata, u32 reg) +{ + u32 data; + unsigned long flags; + + spin_lock_irqsave(&pdata->dev_lock, flags); + data = pdata->ops->reg_read(pdata, reg); + spin_unlock_irqrestore(&pdata->dev_lock, flags); + + return data; +} + +static inline void __smsc911x_reg_write(struct smsc911x_data *pdata, u32 reg, + u32 val) +{ + if (pdata->config.flags & SMSC911X_USE_32BIT) { + writel(val, pdata->ioaddr + reg); + return; + } + + if (pdata->config.flags & SMSC911X_USE_16BIT) { + writew(val & 0xFFFF, pdata->ioaddr + reg); + writew((val >> 16) & 0xFFFF, pdata->ioaddr + reg + 2); + return; + } + + BUG(); +} + +static inline void +__smsc911x_reg_write_shift(struct smsc911x_data *pdata, u32 reg, u32 val) +{ + if (pdata->config.flags & SMSC911X_USE_32BIT) { + writel(val, pdata->ioaddr + __smsc_shift(pdata, reg)); + return; + } + + if (pdata->config.flags & SMSC911X_USE_16BIT) { + writew(val & 0xFFFF, + pdata->ioaddr + __smsc_shift(pdata, reg)); + writew((val >> 16) & 0xFFFF, + pdata->ioaddr + __smsc_shift(pdata, reg + 2)); + return; + } + + BUG(); +} + +static inline void smsc911x_reg_write(struct smsc911x_data *pdata, u32 reg, + u32 val) +{ + unsigned long flags; + + spin_lock_irqsave(&pdata->dev_lock, flags); + pdata->ops->reg_write(pdata, reg, val); + spin_unlock_irqrestore(&pdata->dev_lock, flags); +} + +/* Writes a packet to the TX_DATA_FIFO */ +static inline void +smsc911x_tx_writefifo(struct smsc911x_data *pdata, unsigned int *buf, + unsigned int wordcount) +{ + unsigned long flags; + + spin_lock_irqsave(&pdata->dev_lock, flags); + + if (pdata->config.flags & SMSC911X_SWAP_FIFO) { + while (wordcount--) + __smsc911x_reg_write(pdata, TX_DATA_FIFO, + swab32(*buf++)); + goto out; + } + + if (pdata->config.flags & SMSC911X_USE_32BIT) { + iowrite32_rep(pdata->ioaddr + TX_DATA_FIFO, buf, wordcount); + goto out; + } + + if (pdata->config.flags & SMSC911X_USE_16BIT) { + while (wordcount--) + __smsc911x_reg_write(pdata, TX_DATA_FIFO, *buf++); + goto out; + } + + BUG(); +out: + spin_unlock_irqrestore(&pdata->dev_lock, flags); +} + +/* Writes a packet to the TX_DATA_FIFO - shifted version */ +static inline void +smsc911x_tx_writefifo_shift(struct smsc911x_data *pdata, unsigned int *buf, + unsigned int wordcount) +{ + unsigned long flags; + + spin_lock_irqsave(&pdata->dev_lock, flags); + + if (pdata->config.flags & SMSC911X_SWAP_FIFO) { + while (wordcount--) + __smsc911x_reg_write_shift(pdata, TX_DATA_FIFO, + swab32(*buf++)); + goto out; + } + + if (pdata->config.flags & SMSC911X_USE_32BIT) { + iowrite32_rep(pdata->ioaddr + __smsc_shift(pdata, + TX_DATA_FIFO), buf, wordcount); + goto out; + } + + if (pdata->config.flags & SMSC911X_USE_16BIT) { + while (wordcount--) + __smsc911x_reg_write_shift(pdata, + TX_DATA_FIFO, *buf++); + goto out; + } + + BUG(); +out: + spin_unlock_irqrestore(&pdata->dev_lock, flags); +} + +/* Reads a packet out of the RX_DATA_FIFO */ +static inline void +smsc911x_rx_readfifo(struct smsc911x_data *pdata, unsigned int *buf, + unsigned int wordcount) +{ + unsigned long flags; + + spin_lock_irqsave(&pdata->dev_lock, flags); + + if (pdata->config.flags & SMSC911X_SWAP_FIFO) { + while (wordcount--) + *buf++ = swab32(__smsc911x_reg_read(pdata, + RX_DATA_FIFO)); + goto out; + } + + if (pdata->config.flags & SMSC911X_USE_32BIT) { + ioread32_rep(pdata->ioaddr + RX_DATA_FIFO, buf, wordcount); + goto out; + } + + if (pdata->config.flags & SMSC911X_USE_16BIT) { + while (wordcount--) + *buf++ = __smsc911x_reg_read(pdata, RX_DATA_FIFO); + goto out; + } + + BUG(); +out: + spin_unlock_irqrestore(&pdata->dev_lock, flags); +} + +/* Reads a packet out of the RX_DATA_FIFO - shifted version */ +static inline void +smsc911x_rx_readfifo_shift(struct smsc911x_data *pdata, unsigned int *buf, + unsigned int wordcount) +{ + unsigned long flags; + + spin_lock_irqsave(&pdata->dev_lock, flags); + + if (pdata->config.flags & SMSC911X_SWAP_FIFO) { + while (wordcount--) + *buf++ = swab32(__smsc911x_reg_read_shift(pdata, + RX_DATA_FIFO)); + goto out; + } + + if (pdata->config.flags & SMSC911X_USE_32BIT) { + ioread32_rep(pdata->ioaddr + __smsc_shift(pdata, + RX_DATA_FIFO), buf, wordcount); + goto out; + } + + if (pdata->config.flags & SMSC911X_USE_16BIT) { + while (wordcount--) + *buf++ = __smsc911x_reg_read_shift(pdata, + RX_DATA_FIFO); + goto out; + } + + BUG(); +out: + spin_unlock_irqrestore(&pdata->dev_lock, flags); +} + +/* + * enable regulator and clock resources. + */ +static int smsc911x_enable_resources(struct platform_device *pdev) +{ + struct net_device *ndev = platform_get_drvdata(pdev); + struct smsc911x_data *pdata = netdev_priv(ndev); + int ret = 0; + + ret = regulator_bulk_enable(ARRAY_SIZE(pdata->supplies), + pdata->supplies); + if (ret) + netdev_err(ndev, "failed to enable regulators %d\n", + ret); + + if (!IS_ERR(pdata->clk)) { + ret = clk_prepare_enable(pdata->clk); + if (ret < 0) + netdev_err(ndev, "failed to enable clock %d\n", ret); + } + + return ret; +} + +/* + * disable resources, currently just regulators. + */ +static int smsc911x_disable_resources(struct platform_device *pdev) +{ + struct net_device *ndev = platform_get_drvdata(pdev); + struct smsc911x_data *pdata = netdev_priv(ndev); + int ret = 0; + + ret = regulator_bulk_disable(ARRAY_SIZE(pdata->supplies), + pdata->supplies); + + if (!IS_ERR(pdata->clk)) + clk_disable_unprepare(pdata->clk); + + return ret; +} + +/* + * Request resources, currently just regulators. + * + * The SMSC911x has two power pins: vddvario and vdd33a, in designs where + * these are not always-on we need to request regulators to be turned on + * before we can try to access the device registers. + */ +static int smsc911x_request_resources(struct platform_device *pdev) +{ + struct net_device *ndev = platform_get_drvdata(pdev); + struct smsc911x_data *pdata = netdev_priv(ndev); + int ret = 0; + + /* Request regulators */ + pdata->supplies[0].supply = "vdd33a"; + pdata->supplies[1].supply = "vddvario"; + ret = regulator_bulk_get(&pdev->dev, + ARRAY_SIZE(pdata->supplies), + pdata->supplies); + if (ret) + netdev_err(ndev, "couldn't get regulators %d\n", + ret); + + /* Request clock */ + pdata->clk = clk_get(&pdev->dev, NULL); + if (IS_ERR(pdata->clk)) + dev_dbg(&pdev->dev, "couldn't get clock %li\n", + PTR_ERR(pdata->clk)); + + return ret; +} + +/* + * Free resources, currently just regulators. + * + */ +static void smsc911x_free_resources(struct platform_device *pdev) +{ + struct net_device *ndev = platform_get_drvdata(pdev); + struct smsc911x_data *pdata = netdev_priv(ndev); + + /* Free regulators */ + regulator_bulk_free(ARRAY_SIZE(pdata->supplies), + pdata->supplies); + + /* Free clock */ + if (!IS_ERR(pdata->clk)) { + clk_put(pdata->clk); + pdata->clk = NULL; + } +} + +/* waits for MAC not busy, with timeout. Only called by smsc911x_mac_read + * and smsc911x_mac_write, so assumes mac_lock is held */ +static int smsc911x_mac_complete(struct smsc911x_data *pdata) +{ + int i; + u32 val; + + SMSC_ASSERT_MAC_LOCK(pdata); + + for (i = 0; i < 40; i++) { + val = smsc911x_reg_read(pdata, MAC_CSR_CMD); + if (!(val & MAC_CSR_CMD_CSR_BUSY_)) + return 0; + } + SMSC_WARN(pdata, hw, "Timed out waiting for MAC not BUSY. " + "MAC_CSR_CMD: 0x%08X", val); + return -EIO; +} + +/* Fetches a MAC register value. Assumes mac_lock is acquired */ +static u32 smsc911x_mac_read(struct smsc911x_data *pdata, unsigned int offset) +{ + unsigned int temp; + + SMSC_ASSERT_MAC_LOCK(pdata); + + temp = smsc911x_reg_read(pdata, MAC_CSR_CMD); + if (unlikely(temp & MAC_CSR_CMD_CSR_BUSY_)) { + SMSC_WARN(pdata, hw, "MAC busy at entry"); + return 0xFFFFFFFF; + } + + /* Send the MAC cmd */ + smsc911x_reg_write(pdata, MAC_CSR_CMD, ((offset & 0xFF) | + MAC_CSR_CMD_CSR_BUSY_ | MAC_CSR_CMD_R_NOT_W_)); + + /* Workaround for hardware read-after-write restriction */ + temp = smsc911x_reg_read(pdata, BYTE_TEST); + + /* Wait for the read to complete */ + if (likely(smsc911x_mac_complete(pdata) == 0)) + return smsc911x_reg_read(pdata, MAC_CSR_DATA); + + SMSC_WARN(pdata, hw, "MAC busy after read"); + return 0xFFFFFFFF; +} + +/* Set a mac register, mac_lock must be acquired before calling */ +static void smsc911x_mac_write(struct smsc911x_data *pdata, + unsigned int offset, u32 val) +{ + unsigned int temp; + + SMSC_ASSERT_MAC_LOCK(pdata); + + temp = smsc911x_reg_read(pdata, MAC_CSR_CMD); + if (unlikely(temp & MAC_CSR_CMD_CSR_BUSY_)) { + SMSC_WARN(pdata, hw, + "smsc911x_mac_write failed, MAC busy at entry"); + return; + } + + /* Send data to write */ + smsc911x_reg_write(pdata, MAC_CSR_DATA, val); + + /* Write the actual data */ + smsc911x_reg_write(pdata, MAC_CSR_CMD, ((offset & 0xFF) | + MAC_CSR_CMD_CSR_BUSY_)); + + /* Workaround for hardware read-after-write restriction */ + temp = smsc911x_reg_read(pdata, BYTE_TEST); + + /* Wait for the write to complete */ + if (likely(smsc911x_mac_complete(pdata) == 0)) + return; + + SMSC_WARN(pdata, hw, "smsc911x_mac_write failed, MAC busy after write"); +} + +/* Get a phy register */ +static int smsc911x_mii_read(struct mii_bus *bus, int phyaddr, int regidx) +{ + struct smsc911x_data *pdata = (struct smsc911x_data *)bus->priv; + unsigned long flags; + unsigned int addr; + int i, reg; + + spin_lock_irqsave(&pdata->mac_lock, flags); + + /* Confirm MII not busy */ + if (unlikely(smsc911x_mac_read(pdata, MII_ACC) & MII_ACC_MII_BUSY_)) { + SMSC_WARN(pdata, hw, "MII is busy in smsc911x_mii_read???"); + reg = -EIO; + goto out; + } + + /* Set the address, index & direction (read from PHY) */ + addr = ((phyaddr & 0x1F) << 11) | ((regidx & 0x1F) << 6); + smsc911x_mac_write(pdata, MII_ACC, addr); + + /* Wait for read to complete w/ timeout */ + for (i = 0; i < 100; i++) + if (!(smsc911x_mac_read(pdata, MII_ACC) & MII_ACC_MII_BUSY_)) { + reg = smsc911x_mac_read(pdata, MII_DATA); + goto out; + } + + SMSC_WARN(pdata, hw, "Timed out waiting for MII read to finish"); + reg = -EIO; + +out: + spin_unlock_irqrestore(&pdata->mac_lock, flags); + return reg; +} + +/* Set a phy register */ +static int smsc911x_mii_write(struct mii_bus *bus, int phyaddr, int regidx, + u16 val) +{ + struct smsc911x_data *pdata = (struct smsc911x_data *)bus->priv; + unsigned long flags; + unsigned int addr; + int i, reg; + + spin_lock_irqsave(&pdata->mac_lock, flags); + + /* Confirm MII not busy */ + if (unlikely(smsc911x_mac_read(pdata, MII_ACC) & MII_ACC_MII_BUSY_)) { + SMSC_WARN(pdata, hw, "MII is busy in smsc911x_mii_write???"); + reg = -EIO; + goto out; + } + + /* Put the data to write in the MAC */ + smsc911x_mac_write(pdata, MII_DATA, val); + + /* Set the address, index & direction (write to PHY) */ + addr = ((phyaddr & 0x1F) << 11) | ((regidx & 0x1F) << 6) | + MII_ACC_MII_WRITE_; + smsc911x_mac_write(pdata, MII_ACC, addr); + + /* Wait for write to complete w/ timeout */ + for (i = 0; i < 100; i++) + if (!(smsc911x_mac_read(pdata, MII_ACC) & MII_ACC_MII_BUSY_)) { + reg = 0; + goto out; + } + + SMSC_WARN(pdata, hw, "Timed out waiting for MII write to finish"); + reg = -EIO; + +out: + spin_unlock_irqrestore(&pdata->mac_lock, flags); + return reg; +} + +/* Switch to external phy. Assumes tx and rx are stopped. */ +static void smsc911x_phy_enable_external(struct smsc911x_data *pdata) +{ + unsigned int hwcfg = smsc911x_reg_read(pdata, HW_CFG); + + /* Disable phy clocks to the MAC */ + hwcfg &= (~HW_CFG_PHY_CLK_SEL_); + hwcfg |= HW_CFG_PHY_CLK_SEL_CLK_DIS_; + smsc911x_reg_write(pdata, HW_CFG, hwcfg); + udelay(10); /* Enough time for clocks to stop */ + + /* Switch to external phy */ + hwcfg |= HW_CFG_EXT_PHY_EN_; + smsc911x_reg_write(pdata, HW_CFG, hwcfg); + + /* Enable phy clocks to the MAC */ + hwcfg &= (~HW_CFG_PHY_CLK_SEL_); + hwcfg |= HW_CFG_PHY_CLK_SEL_EXT_PHY_; + smsc911x_reg_write(pdata, HW_CFG, hwcfg); + udelay(10); /* Enough time for clocks to restart */ + + hwcfg |= HW_CFG_SMI_SEL_; + smsc911x_reg_write(pdata, HW_CFG, hwcfg); +} + +/* Autodetects and enables external phy if present on supported chips. + * autodetection can be overridden by specifying SMSC911X_FORCE_INTERNAL_PHY + * or SMSC911X_FORCE_EXTERNAL_PHY in the platform_data flags. */ +static void smsc911x_phy_initialise_external(struct smsc911x_data *pdata) +{ + unsigned int hwcfg = smsc911x_reg_read(pdata, HW_CFG); + + if (pdata->config.flags & SMSC911X_FORCE_INTERNAL_PHY) { + SMSC_TRACE(pdata, hw, "Forcing internal PHY"); + pdata->using_extphy = 0; + } else if (pdata->config.flags & SMSC911X_FORCE_EXTERNAL_PHY) { + SMSC_TRACE(pdata, hw, "Forcing external PHY"); + smsc911x_phy_enable_external(pdata); + pdata->using_extphy = 1; + } else if (hwcfg & HW_CFG_EXT_PHY_DET_) { + SMSC_TRACE(pdata, hw, + "HW_CFG EXT_PHY_DET set, using external PHY"); + smsc911x_phy_enable_external(pdata); + pdata->using_extphy = 1; + } else { + SMSC_TRACE(pdata, hw, + "HW_CFG EXT_PHY_DET clear, using internal PHY"); + pdata->using_extphy = 0; + } +} + +/* Fetches a tx status out of the status fifo */ +static unsigned int smsc911x_tx_get_txstatus(struct smsc911x_data *pdata) +{ + unsigned int result = + smsc911x_reg_read(pdata, TX_FIFO_INF) & TX_FIFO_INF_TSUSED_; + + if (result != 0) + result = smsc911x_reg_read(pdata, TX_STATUS_FIFO); + + return result; +} + +/* Fetches the next rx status */ +static unsigned int smsc911x_rx_get_rxstatus(struct smsc911x_data *pdata) +{ + unsigned int result = + smsc911x_reg_read(pdata, RX_FIFO_INF) & RX_FIFO_INF_RXSUSED_; + + if (result != 0) + result = smsc911x_reg_read(pdata, RX_STATUS_FIFO); + + return result; +} + +#ifdef USE_PHY_WORK_AROUND +static int smsc911x_phy_check_loopbackpkt(struct smsc911x_data *pdata) +{ + unsigned int tries; + u32 wrsz; + u32 rdsz; + ulong bufp; + + for (tries = 0; tries < 10; tries++) { + unsigned int txcmd_a; + unsigned int txcmd_b; + unsigned int status; + unsigned int pktlength; + unsigned int i; + + /* Zero-out rx packet memory */ + memset(pdata->loopback_rx_pkt, 0, MIN_PACKET_SIZE); + + /* Write tx packet to 118 */ + txcmd_a = (u32)((ulong)pdata->loopback_tx_pkt & 0x03) << 16; + txcmd_a |= TX_CMD_A_FIRST_SEG_ | TX_CMD_A_LAST_SEG_; + txcmd_a |= MIN_PACKET_SIZE; + + txcmd_b = MIN_PACKET_SIZE << 16 | MIN_PACKET_SIZE; + + smsc911x_reg_write(pdata, TX_DATA_FIFO, txcmd_a); + smsc911x_reg_write(pdata, TX_DATA_FIFO, txcmd_b); + + bufp = (ulong)pdata->loopback_tx_pkt & (~0x3); + wrsz = MIN_PACKET_SIZE + 3; + wrsz += (u32)((ulong)pdata->loopback_tx_pkt & 0x3); + wrsz >>= 2; + + pdata->ops->tx_writefifo(pdata, (unsigned int *)bufp, wrsz); + + /* Wait till transmit is done */ + i = 60; + do { + udelay(5); + status = smsc911x_tx_get_txstatus(pdata); + } while ((i--) && (!status)); + + if (!status) { + SMSC_WARN(pdata, hw, + "Failed to transmit during loopback test"); + continue; + } + if (status & TX_STS_ES_) { + SMSC_WARN(pdata, hw, + "Transmit encountered errors during loopback test"); + continue; + } + + /* Wait till receive is done */ + i = 60; + do { + udelay(5); + status = smsc911x_rx_get_rxstatus(pdata); + } while ((i--) && (!status)); + + if (!status) { + SMSC_WARN(pdata, hw, + "Failed to receive during loopback test"); + continue; + } + if (status & RX_STS_ES_) { + SMSC_WARN(pdata, hw, + "Receive encountered errors during loopback test"); + continue; + } + + pktlength = ((status & 0x3FFF0000UL) >> 16); + bufp = (ulong)pdata->loopback_rx_pkt; + rdsz = pktlength + 3; + rdsz += (u32)((ulong)pdata->loopback_rx_pkt & 0x3); + rdsz >>= 2; + + pdata->ops->rx_readfifo(pdata, (unsigned int *)bufp, rdsz); + + if (pktlength != (MIN_PACKET_SIZE + 4)) { + SMSC_WARN(pdata, hw, "Unexpected packet size " + "during loop back test, size=%d, will retry", + pktlength); + } else { + unsigned int j; + int mismatch = 0; + for (j = 0; j < MIN_PACKET_SIZE; j++) { + if (pdata->loopback_tx_pkt[j] + != pdata->loopback_rx_pkt[j]) { + mismatch = 1; + break; + } + } + if (!mismatch) { + SMSC_TRACE(pdata, hw, "Successfully verified " + "loopback packet"); + return 0; + } else { + SMSC_WARN(pdata, hw, "Data mismatch " + "during loop back test, will retry"); + } + } + } + + return -EIO; +} + +static int smsc911x_phy_reset(struct smsc911x_data *pdata) +{ + struct phy_device *phy_dev = pdata->phy_dev; + unsigned int temp; + unsigned int i = 100000; + + BUG_ON(!phy_dev); + BUG_ON(!phy_dev->bus); + + SMSC_TRACE(pdata, hw, "Performing PHY BCR Reset"); + smsc911x_mii_write(phy_dev->bus, phy_dev->addr, MII_BMCR, BMCR_RESET); + do { + msleep(1); + temp = smsc911x_mii_read(phy_dev->bus, phy_dev->addr, + MII_BMCR); + } while ((i--) && (temp & BMCR_RESET)); + + if (temp & BMCR_RESET) { + SMSC_WARN(pdata, hw, "PHY reset failed to complete"); + return -EIO; + } + /* Extra delay required because the phy may not be completed with + * its reset when BMCR_RESET is cleared. Specs say 256 uS is + * enough delay but using 1ms here to be safe */ + msleep(1); + + return 0; +} + +static int smsc911x_phy_loopbacktest(struct net_device *dev) +{ + struct smsc911x_data *pdata = netdev_priv(dev); + struct phy_device *phy_dev = pdata->phy_dev; + int result = -EIO; + unsigned int i, val; + unsigned long flags; + + /* Initialise tx packet using broadcast destination address */ + eth_broadcast_addr(pdata->loopback_tx_pkt); + + /* Use incrementing source address */ + for (i = 6; i < 12; i++) + pdata->loopback_tx_pkt[i] = (char)i; + + /* Set length type field */ + pdata->loopback_tx_pkt[12] = 0x00; + pdata->loopback_tx_pkt[13] = 0x00; + + for (i = 14; i < MIN_PACKET_SIZE; i++) + pdata->loopback_tx_pkt[i] = (char)i; + + val = smsc911x_reg_read(pdata, HW_CFG); + val &= HW_CFG_TX_FIF_SZ_; + val |= HW_CFG_SF_; + smsc911x_reg_write(pdata, HW_CFG, val); + + smsc911x_reg_write(pdata, TX_CFG, TX_CFG_TX_ON_); + smsc911x_reg_write(pdata, RX_CFG, + (u32)((ulong)pdata->loopback_rx_pkt & 0x03) << 8); + + for (i = 0; i < 10; i++) { + /* Set PHY to 10/FD, no ANEG, and loopback mode */ + smsc911x_mii_write(phy_dev->bus, phy_dev->addr, MII_BMCR, + BMCR_LOOPBACK | BMCR_FULLDPLX); + + /* Enable MAC tx/rx, FD */ + spin_lock_irqsave(&pdata->mac_lock, flags); + smsc911x_mac_write(pdata, MAC_CR, MAC_CR_FDPX_ + | MAC_CR_TXEN_ | MAC_CR_RXEN_); + spin_unlock_irqrestore(&pdata->mac_lock, flags); + + if (smsc911x_phy_check_loopbackpkt(pdata) == 0) { + result = 0; + break; + } + pdata->resetcount++; + + /* Disable MAC rx */ + spin_lock_irqsave(&pdata->mac_lock, flags); + smsc911x_mac_write(pdata, MAC_CR, 0); + spin_unlock_irqrestore(&pdata->mac_lock, flags); + + smsc911x_phy_reset(pdata); + } + + /* Disable MAC */ + spin_lock_irqsave(&pdata->mac_lock, flags); + smsc911x_mac_write(pdata, MAC_CR, 0); + spin_unlock_irqrestore(&pdata->mac_lock, flags); + + /* Cancel PHY loopback mode */ + smsc911x_mii_write(phy_dev->bus, phy_dev->addr, MII_BMCR, 0); + + smsc911x_reg_write(pdata, TX_CFG, 0); + smsc911x_reg_write(pdata, RX_CFG, 0); + + return result; +} +#endif /* USE_PHY_WORK_AROUND */ + +static void smsc911x_phy_update_flowcontrol(struct smsc911x_data *pdata) +{ + struct phy_device *phy_dev = pdata->phy_dev; + u32 afc = smsc911x_reg_read(pdata, AFC_CFG); + u32 flow; + unsigned long flags; + + if (phy_dev->duplex == DUPLEX_FULL) { + u16 lcladv = phy_read(phy_dev, MII_ADVERTISE); + u16 rmtadv = phy_read(phy_dev, MII_LPA); + u8 cap = mii_resolve_flowctrl_fdx(lcladv, rmtadv); + + if (cap & FLOW_CTRL_RX) + flow = 0xFFFF0002; + else + flow = 0; + + if (cap & FLOW_CTRL_TX) + afc |= 0xF; + else + afc &= ~0xF; + + SMSC_TRACE(pdata, hw, "rx pause %s, tx pause %s", + (cap & FLOW_CTRL_RX ? "enabled" : "disabled"), + (cap & FLOW_CTRL_TX ? "enabled" : "disabled")); + } else { + SMSC_TRACE(pdata, hw, "half duplex"); + flow = 0; + afc |= 0xF; + } + + spin_lock_irqsave(&pdata->mac_lock, flags); + smsc911x_mac_write(pdata, FLOW, flow); + spin_unlock_irqrestore(&pdata->mac_lock, flags); + + smsc911x_reg_write(pdata, AFC_CFG, afc); +} + +/* Update link mode if anything has changed. Called periodically when the + * PHY is in polling mode, even if nothing has changed. */ +static void smsc911x_phy_adjust_link(struct net_device *dev) +{ + struct smsc911x_data *pdata = netdev_priv(dev); + struct phy_device *phy_dev = pdata->phy_dev; + unsigned long flags; + int carrier; + + if (phy_dev->duplex != pdata->last_duplex) { + unsigned int mac_cr; + SMSC_TRACE(pdata, hw, "duplex state has changed"); + + spin_lock_irqsave(&pdata->mac_lock, flags); + mac_cr = smsc911x_mac_read(pdata, MAC_CR); + if (phy_dev->duplex) { + SMSC_TRACE(pdata, hw, + "configuring for full duplex mode"); + mac_cr |= MAC_CR_FDPX_; + } else { + SMSC_TRACE(pdata, hw, + "configuring for half duplex mode"); + mac_cr &= ~MAC_CR_FDPX_; + } + smsc911x_mac_write(pdata, MAC_CR, mac_cr); + spin_unlock_irqrestore(&pdata->mac_lock, flags); + + smsc911x_phy_update_flowcontrol(pdata); + pdata->last_duplex = phy_dev->duplex; + } + + carrier = netif_carrier_ok(dev); + if (carrier != pdata->last_carrier) { + SMSC_TRACE(pdata, hw, "carrier state has changed"); + if (carrier) { + SMSC_TRACE(pdata, hw, "configuring for carrier OK"); + if ((pdata->gpio_orig_setting & GPIO_CFG_LED1_EN_) && + (!pdata->using_extphy)) { + /* Restore original GPIO configuration */ + pdata->gpio_setting = pdata->gpio_orig_setting; + smsc911x_reg_write(pdata, GPIO_CFG, + pdata->gpio_setting); + } + } else { + SMSC_TRACE(pdata, hw, "configuring for no carrier"); + /* Check global setting that LED1 + * usage is 10/100 indicator */ + pdata->gpio_setting = smsc911x_reg_read(pdata, + GPIO_CFG); + if ((pdata->gpio_setting & GPIO_CFG_LED1_EN_) && + (!pdata->using_extphy)) { + /* Force 10/100 LED off, after saving + * original GPIO configuration */ + pdata->gpio_orig_setting = pdata->gpio_setting; + + pdata->gpio_setting &= ~GPIO_CFG_LED1_EN_; + pdata->gpio_setting |= (GPIO_CFG_GPIOBUF0_ + | GPIO_CFG_GPIODIR0_ + | GPIO_CFG_GPIOD0_); + smsc911x_reg_write(pdata, GPIO_CFG, + pdata->gpio_setting); + } + } + pdata->last_carrier = carrier; + } +} + +static int smsc911x_mii_probe(struct net_device *dev) +{ + struct smsc911x_data *pdata = netdev_priv(dev); + struct phy_device *phydev = NULL; + int ret; + + /* find the first phy */ + phydev = phy_find_first(pdata->mii_bus); + if (!phydev) { + netdev_err(dev, "no PHY found\n"); + return -ENODEV; + } + + SMSC_TRACE(pdata, probe, "PHY: addr %d, phy_id 0x%08X", + phydev->addr, phydev->phy_id); + + ret = phy_connect_direct(dev, phydev, &smsc911x_phy_adjust_link, + pdata->config.phy_interface); + + if (ret) { + netdev_err(dev, "Could not attach to PHY\n"); + return ret; + } + + netdev_info(dev, + "attached PHY driver [%s] (mii_bus:phy_addr=%s, irq=%d)\n", + phydev->drv->name, dev_name(&phydev->dev), phydev->irq); + + /* mask with MAC supported features */ + phydev->supported &= (PHY_BASIC_FEATURES | SUPPORTED_Pause | + SUPPORTED_Asym_Pause); + phydev->advertising = phydev->supported; + + pdata->phy_dev = phydev; + pdata->last_duplex = -1; + pdata->last_carrier = -1; + +#ifdef USE_PHY_WORK_AROUND + if (smsc911x_phy_loopbacktest(dev) < 0) { + SMSC_WARN(pdata, hw, "Failed Loop Back Test"); + return -ENODEV; + } + SMSC_TRACE(pdata, hw, "Passed Loop Back Test"); +#endif /* USE_PHY_WORK_AROUND */ + + SMSC_TRACE(pdata, hw, "phy initialised successfully"); + return 0; +} + +static int smsc911x_mii_init(struct platform_device *pdev, + struct net_device *dev) +{ + struct smsc911x_data *pdata = netdev_priv(dev); + int err = -ENXIO, i; + + pdata->mii_bus = mdiobus_alloc(); + if (!pdata->mii_bus) { + err = -ENOMEM; + goto err_out_1; + } + + pdata->mii_bus->name = SMSC_MDIONAME; + snprintf(pdata->mii_bus->id, MII_BUS_ID_SIZE, "%s-%x", + pdev->name, pdev->id); + pdata->mii_bus->priv = pdata; + pdata->mii_bus->read = smsc911x_mii_read; + pdata->mii_bus->write = smsc911x_mii_write; + pdata->mii_bus->irq = pdata->phy_irq; + for (i = 0; i < PHY_MAX_ADDR; ++i) + pdata->mii_bus->irq[i] = PHY_POLL; + + pdata->mii_bus->parent = &pdev->dev; + + switch (pdata->idrev & 0xFFFF0000) { + case 0x01170000: + case 0x01150000: + case 0x117A0000: + case 0x115A0000: + /* External PHY supported, try to autodetect */ + smsc911x_phy_initialise_external(pdata); + break; + default: + SMSC_TRACE(pdata, hw, "External PHY is not supported, " + "using internal PHY"); + pdata->using_extphy = 0; + break; + } + + if (!pdata->using_extphy) { + /* Mask all PHYs except ID 1 (internal) */ + pdata->mii_bus->phy_mask = ~(1 << 1); + } + + if (mdiobus_register(pdata->mii_bus)) { + SMSC_WARN(pdata, probe, "Error registering mii bus"); + goto err_out_free_bus_2; + } + + if (smsc911x_mii_probe(dev) < 0) { + SMSC_WARN(pdata, probe, "Error registering mii bus"); + goto err_out_unregister_bus_3; + } + + return 0; + +err_out_unregister_bus_3: + mdiobus_unregister(pdata->mii_bus); +err_out_free_bus_2: + mdiobus_free(pdata->mii_bus); +err_out_1: + return err; +} + +/* Gets the number of tx statuses in the fifo */ +static unsigned int smsc911x_tx_get_txstatcount(struct smsc911x_data *pdata) +{ + return (smsc911x_reg_read(pdata, TX_FIFO_INF) + & TX_FIFO_INF_TSUSED_) >> 16; +} + +/* Reads tx statuses and increments counters where necessary */ +static void smsc911x_tx_update_txcounters(struct net_device *dev) +{ + struct smsc911x_data *pdata = netdev_priv(dev); + unsigned int tx_stat; + + while ((tx_stat = smsc911x_tx_get_txstatus(pdata)) != 0) { + if (unlikely(tx_stat & 0x80000000)) { + /* In this driver the packet tag is used as the packet + * length. Since a packet length can never reach the + * size of 0x8000, this bit is reserved. It is worth + * noting that the "reserved bit" in the warning above + * does not reference a hardware defined reserved bit + * but rather a driver defined one. + */ + SMSC_WARN(pdata, hw, "Packet tag reserved bit is high"); + } else { + if (unlikely(tx_stat & TX_STS_ES_)) { + dev->stats.tx_errors++; + } else { + dev->stats.tx_packets++; + dev->stats.tx_bytes += (tx_stat >> 16); + } + if (unlikely(tx_stat & TX_STS_EXCESS_COL_)) { + dev->stats.collisions += 16; + dev->stats.tx_aborted_errors += 1; + } else { + dev->stats.collisions += + ((tx_stat >> 3) & 0xF); + } + if (unlikely(tx_stat & TX_STS_LOST_CARRIER_)) + dev->stats.tx_carrier_errors += 1; + if (unlikely(tx_stat & TX_STS_LATE_COL_)) { + dev->stats.collisions++; + dev->stats.tx_aborted_errors++; + } + } + } +} + +/* Increments the Rx error counters */ +static void +smsc911x_rx_counterrors(struct net_device *dev, unsigned int rxstat) +{ + int crc_err = 0; + + if (unlikely(rxstat & RX_STS_ES_)) { + dev->stats.rx_errors++; + if (unlikely(rxstat & RX_STS_CRC_ERR_)) { + dev->stats.rx_crc_errors++; + crc_err = 1; + } + } + if (likely(!crc_err)) { + if (unlikely((rxstat & RX_STS_FRAME_TYPE_) && + (rxstat & RX_STS_LENGTH_ERR_))) + dev->stats.rx_length_errors++; + if (rxstat & RX_STS_MCAST_) + dev->stats.multicast++; + } +} + +/* Quickly dumps bad packets */ +static void +smsc911x_rx_fastforward(struct smsc911x_data *pdata, unsigned int pktwords) +{ + if (likely(pktwords >= 4)) { + unsigned int timeout = 500; + unsigned int val; + smsc911x_reg_write(pdata, RX_DP_CTRL, RX_DP_CTRL_RX_FFWD_); + do { + udelay(1); + val = smsc911x_reg_read(pdata, RX_DP_CTRL); + } while ((val & RX_DP_CTRL_RX_FFWD_) && --timeout); + + if (unlikely(timeout == 0)) + SMSC_WARN(pdata, hw, "Timed out waiting for " + "RX FFWD to finish, RX_DP_CTRL: 0x%08X", val); + } else { + unsigned int temp; + while (pktwords--) + temp = smsc911x_reg_read(pdata, RX_DATA_FIFO); + } +} + +/* NAPI poll function */ +static int smsc911x_poll(struct napi_struct *napi, int budget) +{ + struct smsc911x_data *pdata = + container_of(napi, struct smsc911x_data, napi); + struct net_device *dev = pdata->dev; + int npackets = 0; + + while (npackets < budget) { + unsigned int pktlength; + unsigned int pktwords; + struct sk_buff *skb; + unsigned int rxstat = smsc911x_rx_get_rxstatus(pdata); + + if (!rxstat) { + unsigned int temp; + /* We processed all packets available. Tell NAPI it can + * stop polling then re-enable rx interrupts */ + smsc911x_reg_write(pdata, INT_STS, INT_STS_RSFL_); + napi_complete(napi); + temp = smsc911x_reg_read(pdata, INT_EN); + temp |= INT_EN_RSFL_EN_; + smsc911x_reg_write(pdata, INT_EN, temp); + break; + } + + /* Count packet for NAPI scheduling, even if it has an error. + * Error packets still require cycles to discard */ + npackets++; + + pktlength = ((rxstat & 0x3FFF0000) >> 16); + pktwords = (pktlength + NET_IP_ALIGN + 3) >> 2; + smsc911x_rx_counterrors(dev, rxstat); + + if (unlikely(rxstat & RX_STS_ES_)) { + SMSC_WARN(pdata, rx_err, + "Discarding packet with error bit set"); + /* Packet has an error, discard it and continue with + * the next */ + smsc911x_rx_fastforward(pdata, pktwords); + dev->stats.rx_dropped++; + continue; + } + + skb = netdev_alloc_skb(dev, pktwords << 2); + if (unlikely(!skb)) { + SMSC_WARN(pdata, rx_err, + "Unable to allocate skb for rx packet"); + /* Drop the packet and stop this polling iteration */ + smsc911x_rx_fastforward(pdata, pktwords); + dev->stats.rx_dropped++; + break; + } + + pdata->ops->rx_readfifo(pdata, + (unsigned int *)skb->data, pktwords); + + /* Align IP on 16B boundary */ + skb_reserve(skb, NET_IP_ALIGN); + skb_put(skb, pktlength - 4); + skb->protocol = eth_type_trans(skb, dev); + skb_checksum_none_assert(skb); + netif_receive_skb(skb); + + /* Update counters */ + dev->stats.rx_packets++; + dev->stats.rx_bytes += (pktlength - 4); + } + + /* Return total received packets */ + return npackets; +} + +/* Returns hash bit number for given MAC address + * Example: + * 01 00 5E 00 00 01 -> returns bit number 31 */ +static unsigned int smsc911x_hash(char addr[ETH_ALEN]) +{ + return (ether_crc(ETH_ALEN, addr) >> 26) & 0x3f; +} + +static void smsc911x_rx_multicast_update(struct smsc911x_data *pdata) +{ + /* Performs the multicast & mac_cr update. This is called when + * safe on the current hardware, and with the mac_lock held */ + unsigned int mac_cr; + + SMSC_ASSERT_MAC_LOCK(pdata); + + mac_cr = smsc911x_mac_read(pdata, MAC_CR); + mac_cr |= pdata->set_bits_mask; + mac_cr &= ~(pdata->clear_bits_mask); + smsc911x_mac_write(pdata, MAC_CR, mac_cr); + smsc911x_mac_write(pdata, HASHH, pdata->hashhi); + smsc911x_mac_write(pdata, HASHL, pdata->hashlo); + SMSC_TRACE(pdata, hw, "maccr 0x%08X, HASHH 0x%08X, HASHL 0x%08X", + mac_cr, pdata->hashhi, pdata->hashlo); +} + +static void smsc911x_rx_multicast_update_workaround(struct smsc911x_data *pdata) +{ + unsigned int mac_cr; + + /* This function is only called for older LAN911x devices + * (revA or revB), where MAC_CR, HASHH and HASHL should not + * be modified during Rx - newer devices immediately update the + * registers. + * + * This is called from interrupt context */ + + spin_lock(&pdata->mac_lock); + + /* Check Rx has stopped */ + if (smsc911x_mac_read(pdata, MAC_CR) & MAC_CR_RXEN_) + SMSC_WARN(pdata, drv, "Rx not stopped"); + + /* Perform the update - safe to do now Rx has stopped */ + smsc911x_rx_multicast_update(pdata); + + /* Re-enable Rx */ + mac_cr = smsc911x_mac_read(pdata, MAC_CR); + mac_cr |= MAC_CR_RXEN_; + smsc911x_mac_write(pdata, MAC_CR, mac_cr); + + pdata->multicast_update_pending = 0; + + spin_unlock(&pdata->mac_lock); +} + +static int smsc911x_phy_general_power_up(struct smsc911x_data *pdata) +{ + int rc = 0; + + if (!pdata->phy_dev) + return rc; + + /* If the internal PHY is in General Power-Down mode, all, except the + * management interface, is powered-down and stays in that condition as + * long as Phy register bit 0.11 is HIGH. + * + * In that case, clear the bit 0.11, so the PHY powers up and we can + * access to the phy registers. + */ + rc = phy_read(pdata->phy_dev, MII_BMCR); + if (rc < 0) { + SMSC_WARN(pdata, drv, "Failed reading PHY control reg"); + return rc; + } + + /* If the PHY general power-down bit is not set is not necessary to + * disable the general power down-mode. + */ + if (rc & BMCR_PDOWN) { + rc = phy_write(pdata->phy_dev, MII_BMCR, rc & ~BMCR_PDOWN); + if (rc < 0) { + SMSC_WARN(pdata, drv, "Failed writing PHY control reg"); + return rc; + } + + usleep_range(1000, 1500); + } + + return 0; +} + +static int smsc911x_phy_disable_energy_detect(struct smsc911x_data *pdata) +{ + int rc = 0; + + if (!pdata->phy_dev) + return rc; + + rc = phy_read(pdata->phy_dev, MII_LAN83C185_CTRL_STATUS); + + if (rc < 0) { + SMSC_WARN(pdata, drv, "Failed reading PHY control reg"); + return rc; + } + + /* Only disable if energy detect mode is already enabled */ + if (rc & MII_LAN83C185_EDPWRDOWN) { + /* Disable energy detect mode for this SMSC Transceivers */ + rc = phy_write(pdata->phy_dev, MII_LAN83C185_CTRL_STATUS, + rc & (~MII_LAN83C185_EDPWRDOWN)); + + if (rc < 0) { + SMSC_WARN(pdata, drv, "Failed writing PHY control reg"); + return rc; + } + /* Allow PHY to wakeup */ + mdelay(2); + } + + return 0; +} + +static int smsc911x_phy_enable_energy_detect(struct smsc911x_data *pdata) +{ + int rc = 0; + + if (!pdata->phy_dev) + return rc; + + rc = phy_read(pdata->phy_dev, MII_LAN83C185_CTRL_STATUS); + + if (rc < 0) { + SMSC_WARN(pdata, drv, "Failed reading PHY control reg"); + return rc; + } + + /* Only enable if energy detect mode is already disabled */ + if (!(rc & MII_LAN83C185_EDPWRDOWN)) { + /* Enable energy detect mode for this SMSC Transceivers */ + rc = phy_write(pdata->phy_dev, MII_LAN83C185_CTRL_STATUS, + rc | MII_LAN83C185_EDPWRDOWN); + + if (rc < 0) { + SMSC_WARN(pdata, drv, "Failed writing PHY control reg"); + return rc; + } + } + return 0; +} + +static int smsc911x_soft_reset(struct smsc911x_data *pdata) +{ + unsigned int timeout; + unsigned int temp; + int ret; + + /* + * Make sure to power-up the PHY chip before doing a reset, otherwise + * the reset fails. + */ + ret = smsc911x_phy_general_power_up(pdata); + if (ret) { + SMSC_WARN(pdata, drv, "Failed to power-up the PHY chip"); + return ret; + } + + /* + * LAN9210/LAN9211/LAN9220/LAN9221 chips have an internal PHY that + * are initialized in a Energy Detect Power-Down mode that prevents + * the MAC chip to be software reseted. So we have to wakeup the PHY + * before. + */ + if (pdata->generation == 4) { + ret = smsc911x_phy_disable_energy_detect(pdata); + + if (ret) { + SMSC_WARN(pdata, drv, "Failed to wakeup the PHY chip"); + return ret; + } + } + + /* Reset the LAN911x */ + smsc911x_reg_write(pdata, HW_CFG, HW_CFG_SRST_); + timeout = 10; + do { + udelay(10); + temp = smsc911x_reg_read(pdata, HW_CFG); + } while ((--timeout) && (temp & HW_CFG_SRST_)); + + if (unlikely(temp & HW_CFG_SRST_)) { + SMSC_WARN(pdata, drv, "Failed to complete reset"); + return -EIO; + } + + if (pdata->generation == 4) { + ret = smsc911x_phy_enable_energy_detect(pdata); + + if (ret) { + SMSC_WARN(pdata, drv, "Failed to wakeup the PHY chip"); + return ret; + } + } + + return 0; +} + +/* Sets the device MAC address to dev_addr, called with mac_lock held */ +static void +smsc911x_set_hw_mac_address(struct smsc911x_data *pdata, u8 dev_addr[6]) +{ + u32 mac_high16 = (dev_addr[5] << 8) | dev_addr[4]; + u32 mac_low32 = (dev_addr[3] << 24) | (dev_addr[2] << 16) | + (dev_addr[1] << 8) | dev_addr[0]; + + SMSC_ASSERT_MAC_LOCK(pdata); + + smsc911x_mac_write(pdata, ADDRH, mac_high16); + smsc911x_mac_write(pdata, ADDRL, mac_low32); +} + +static void smsc911x_disable_irq_chip(struct net_device *dev) +{ + struct smsc911x_data *pdata = netdev_priv(dev); + + smsc911x_reg_write(pdata, INT_EN, 0); + smsc911x_reg_write(pdata, INT_STS, 0xFFFFFFFF); +} + +static int smsc911x_open(struct net_device *dev) +{ + struct smsc911x_data *pdata = netdev_priv(dev); + unsigned int timeout; + unsigned int temp; + unsigned int intcfg; + + /* if the phy is not yet registered, retry later*/ + if (!pdata->phy_dev) { + SMSC_WARN(pdata, hw, "phy_dev is NULL"); + return -EAGAIN; + } + + /* Reset the LAN911x */ + if (smsc911x_soft_reset(pdata)) { + SMSC_WARN(pdata, hw, "soft reset failed"); + return -EIO; + } + + smsc911x_reg_write(pdata, HW_CFG, 0x00050000); + smsc911x_reg_write(pdata, AFC_CFG, 0x006E3740); + + /* Increase the legal frame size of VLAN tagged frames to 1522 bytes */ + spin_lock_irq(&pdata->mac_lock); + smsc911x_mac_write(pdata, VLAN1, ETH_P_8021Q); + spin_unlock_irq(&pdata->mac_lock); + + /* Make sure EEPROM has finished loading before setting GPIO_CFG */ + timeout = 50; + while ((smsc911x_reg_read(pdata, E2P_CMD) & E2P_CMD_EPC_BUSY_) && + --timeout) { + udelay(10); + } + + if (unlikely(timeout == 0)) + SMSC_WARN(pdata, ifup, + "Timed out waiting for EEPROM busy bit to clear"); + + smsc911x_reg_write(pdata, GPIO_CFG, 0x70070000); + + /* The soft reset above cleared the device's MAC address, + * restore it from local copy (set in probe) */ + spin_lock_irq(&pdata->mac_lock); + smsc911x_set_hw_mac_address(pdata, dev->dev_addr); + spin_unlock_irq(&pdata->mac_lock); + + /* Initialise irqs, but leave all sources disabled */ + smsc911x_disable_irq_chip(dev); + + /* Set interrupt deassertion to 100uS */ + intcfg = ((10 << 24) | INT_CFG_IRQ_EN_); + + if (pdata->config.irq_polarity) { + SMSC_TRACE(pdata, ifup, "irq polarity: active high"); + intcfg |= INT_CFG_IRQ_POL_; + } else { + SMSC_TRACE(pdata, ifup, "irq polarity: active low"); + } + + if (pdata->config.irq_type) { + SMSC_TRACE(pdata, ifup, "irq type: push-pull"); + intcfg |= INT_CFG_IRQ_TYPE_; + } else { + SMSC_TRACE(pdata, ifup, "irq type: open drain"); + } + + smsc911x_reg_write(pdata, INT_CFG, intcfg); + + SMSC_TRACE(pdata, ifup, "Testing irq handler using IRQ %d", dev->irq); + pdata->software_irq_signal = 0; + smp_wmb(); + + temp = smsc911x_reg_read(pdata, INT_EN); + temp |= INT_EN_SW_INT_EN_; + smsc911x_reg_write(pdata, INT_EN, temp); + + timeout = 1000; + while (timeout--) { + if (pdata->software_irq_signal) + break; + msleep(1); + } + + if (!pdata->software_irq_signal) { + netdev_warn(dev, "ISR failed signaling test (IRQ %d)\n", + dev->irq); + return -ENODEV; + } + SMSC_TRACE(pdata, ifup, "IRQ handler passed test using IRQ %d", + dev->irq); + + netdev_info(dev, "SMSC911x/921x identified at %#08lx, IRQ: %d\n", + (unsigned long)pdata->ioaddr, dev->irq); + + /* Reset the last known duplex and carrier */ + pdata->last_duplex = -1; + pdata->last_carrier = -1; + + /* Bring the PHY up */ + phy_start(pdata->phy_dev); + + temp = smsc911x_reg_read(pdata, HW_CFG); + /* Preserve TX FIFO size and external PHY configuration */ + temp &= (HW_CFG_TX_FIF_SZ_|0x00000FFF); + temp |= HW_CFG_SF_; + smsc911x_reg_write(pdata, HW_CFG, temp); + + temp = smsc911x_reg_read(pdata, FIFO_INT); + temp |= FIFO_INT_TX_AVAIL_LEVEL_; + temp &= ~(FIFO_INT_RX_STS_LEVEL_); + smsc911x_reg_write(pdata, FIFO_INT, temp); + + /* set RX Data offset to 2 bytes for alignment */ + smsc911x_reg_write(pdata, RX_CFG, (NET_IP_ALIGN << 8)); + + /* enable NAPI polling before enabling RX interrupts */ + napi_enable(&pdata->napi); + + temp = smsc911x_reg_read(pdata, INT_EN); + temp |= (INT_EN_TDFA_EN_ | INT_EN_RSFL_EN_ | INT_EN_RXSTOP_INT_EN_); + smsc911x_reg_write(pdata, INT_EN, temp); + + spin_lock_irq(&pdata->mac_lock); + temp = smsc911x_mac_read(pdata, MAC_CR); + temp |= (MAC_CR_TXEN_ | MAC_CR_RXEN_ | MAC_CR_HBDIS_); + smsc911x_mac_write(pdata, MAC_CR, temp); + spin_unlock_irq(&pdata->mac_lock); + + smsc911x_reg_write(pdata, TX_CFG, TX_CFG_TX_ON_); + + netif_start_queue(dev); + return 0; +} + +/* Entry point for stopping the interface */ +static int smsc911x_stop(struct net_device *dev) +{ + struct smsc911x_data *pdata = netdev_priv(dev); + unsigned int temp; + + /* Disable all device interrupts */ + temp = smsc911x_reg_read(pdata, INT_CFG); + temp &= ~INT_CFG_IRQ_EN_; + smsc911x_reg_write(pdata, INT_CFG, temp); + + /* Stop Tx and Rx polling */ + netif_stop_queue(dev); + napi_disable(&pdata->napi); + + /* At this point all Rx and Tx activity is stopped */ + dev->stats.rx_dropped += smsc911x_reg_read(pdata, RX_DROP); + smsc911x_tx_update_txcounters(dev); + + /* Bring the PHY down */ + if (pdata->phy_dev) + phy_stop(pdata->phy_dev); + + SMSC_TRACE(pdata, ifdown, "Interface stopped"); + return 0; +} + +/* Entry point for transmitting a packet */ +static int smsc911x_hard_start_xmit(struct sk_buff *skb, struct net_device *dev) +{ + struct smsc911x_data *pdata = netdev_priv(dev); + unsigned int freespace; + unsigned int tx_cmd_a; + unsigned int tx_cmd_b; + unsigned int temp; + u32 wrsz; + ulong bufp; + + freespace = smsc911x_reg_read(pdata, TX_FIFO_INF) & TX_FIFO_INF_TDFREE_; + + if (unlikely(freespace < TX_FIFO_LOW_THRESHOLD)) + SMSC_WARN(pdata, tx_err, + "Tx data fifo low, space available: %d", freespace); + + /* Word alignment adjustment */ + tx_cmd_a = (u32)((ulong)skb->data & 0x03) << 16; + tx_cmd_a |= TX_CMD_A_FIRST_SEG_ | TX_CMD_A_LAST_SEG_; + tx_cmd_a |= (unsigned int)skb->len; + + tx_cmd_b = ((unsigned int)skb->len) << 16; + tx_cmd_b |= (unsigned int)skb->len; + + smsc911x_reg_write(pdata, TX_DATA_FIFO, tx_cmd_a); + smsc911x_reg_write(pdata, TX_DATA_FIFO, tx_cmd_b); + + bufp = (ulong)skb->data & (~0x3); + wrsz = (u32)skb->len + 3; + wrsz += (u32)((ulong)skb->data & 0x3); + wrsz >>= 2; + + pdata->ops->tx_writefifo(pdata, (unsigned int *)bufp, wrsz); + freespace -= (skb->len + 32); + skb_tx_timestamp(skb); + dev_consume_skb_any(skb); + + if (unlikely(smsc911x_tx_get_txstatcount(pdata) >= 30)) + smsc911x_tx_update_txcounters(dev); + + if (freespace < TX_FIFO_LOW_THRESHOLD) { + netif_stop_queue(dev); + temp = smsc911x_reg_read(pdata, FIFO_INT); + temp &= 0x00FFFFFF; + temp |= 0x32000000; + smsc911x_reg_write(pdata, FIFO_INT, temp); + } + + return NETDEV_TX_OK; +} + +/* Entry point for getting status counters */ +static struct net_device_stats *smsc911x_get_stats(struct net_device *dev) +{ + struct smsc911x_data *pdata = netdev_priv(dev); + smsc911x_tx_update_txcounters(dev); + dev->stats.rx_dropped += smsc911x_reg_read(pdata, RX_DROP); + return &dev->stats; +} + +/* Entry point for setting addressing modes */ +static void smsc911x_set_multicast_list(struct net_device *dev) +{ + struct smsc911x_data *pdata = netdev_priv(dev); + unsigned long flags; + + if (dev->flags & IFF_PROMISC) { + /* Enabling promiscuous mode */ + pdata->set_bits_mask = MAC_CR_PRMS_; + pdata->clear_bits_mask = (MAC_CR_MCPAS_ | MAC_CR_HPFILT_); + pdata->hashhi = 0; + pdata->hashlo = 0; + } else if (dev->flags & IFF_ALLMULTI) { + /* Enabling all multicast mode */ + pdata->set_bits_mask = MAC_CR_MCPAS_; + pdata->clear_bits_mask = (MAC_CR_PRMS_ | MAC_CR_HPFILT_); + pdata->hashhi = 0; + pdata->hashlo = 0; + } else if (!netdev_mc_empty(dev)) { + /* Enabling specific multicast addresses */ + unsigned int hash_high = 0; + unsigned int hash_low = 0; + struct netdev_hw_addr *ha; + + pdata->set_bits_mask = MAC_CR_HPFILT_; + pdata->clear_bits_mask = (MAC_CR_PRMS_ | MAC_CR_MCPAS_); + + netdev_for_each_mc_addr(ha, dev) { + unsigned int bitnum = smsc911x_hash(ha->addr); + unsigned int mask = 0x01 << (bitnum & 0x1F); + + if (bitnum & 0x20) + hash_high |= mask; + else + hash_low |= mask; + } + + pdata->hashhi = hash_high; + pdata->hashlo = hash_low; + } else { + /* Enabling local MAC address only */ + pdata->set_bits_mask = 0; + pdata->clear_bits_mask = + (MAC_CR_PRMS_ | MAC_CR_MCPAS_ | MAC_CR_HPFILT_); + pdata->hashhi = 0; + pdata->hashlo = 0; + } + + spin_lock_irqsave(&pdata->mac_lock, flags); + + if (pdata->generation <= 1) { + /* Older hardware revision - cannot change these flags while + * receiving data */ + if (!pdata->multicast_update_pending) { + unsigned int temp; + SMSC_TRACE(pdata, hw, "scheduling mcast update"); + pdata->multicast_update_pending = 1; + + /* Request the hardware to stop, then perform the + * update when we get an RX_STOP interrupt */ + temp = smsc911x_mac_read(pdata, MAC_CR); + temp &= ~(MAC_CR_RXEN_); + smsc911x_mac_write(pdata, MAC_CR, temp); + } else { + /* There is another update pending, this should now + * use the newer values */ + } + } else { + /* Newer hardware revision - can write immediately */ + smsc911x_rx_multicast_update(pdata); + } + + spin_unlock_irqrestore(&pdata->mac_lock, flags); +} + +static irqreturn_t smsc911x_irqhandler(int irq, void *dev_id) +{ + struct net_device *dev = dev_id; + struct smsc911x_data *pdata = netdev_priv(dev); + u32 intsts = smsc911x_reg_read(pdata, INT_STS); + u32 inten = smsc911x_reg_read(pdata, INT_EN); + int serviced = IRQ_NONE; + u32 temp; + + if (unlikely(intsts & inten & INT_STS_SW_INT_)) { + temp = smsc911x_reg_read(pdata, INT_EN); + temp &= (~INT_EN_SW_INT_EN_); + smsc911x_reg_write(pdata, INT_EN, temp); + smsc911x_reg_write(pdata, INT_STS, INT_STS_SW_INT_); + pdata->software_irq_signal = 1; + smp_wmb(); + serviced = IRQ_HANDLED; + } + + if (unlikely(intsts & inten & INT_STS_RXSTOP_INT_)) { + /* Called when there is a multicast update scheduled and + * it is now safe to complete the update */ + SMSC_TRACE(pdata, intr, "RX Stop interrupt"); + smsc911x_reg_write(pdata, INT_STS, INT_STS_RXSTOP_INT_); + if (pdata->multicast_update_pending) + smsc911x_rx_multicast_update_workaround(pdata); + serviced = IRQ_HANDLED; + } + + if (intsts & inten & INT_STS_TDFA_) { + temp = smsc911x_reg_read(pdata, FIFO_INT); + temp |= FIFO_INT_TX_AVAIL_LEVEL_; + smsc911x_reg_write(pdata, FIFO_INT, temp); + smsc911x_reg_write(pdata, INT_STS, INT_STS_TDFA_); + netif_wake_queue(dev); + serviced = IRQ_HANDLED; + } + + if (unlikely(intsts & inten & INT_STS_RXE_)) { + SMSC_TRACE(pdata, intr, "RX Error interrupt"); + smsc911x_reg_write(pdata, INT_STS, INT_STS_RXE_); + serviced = IRQ_HANDLED; + } + + if (likely(intsts & inten & INT_STS_RSFL_)) { + if (likely(napi_schedule_prep(&pdata->napi))) { + /* Disable Rx interrupts */ + temp = smsc911x_reg_read(pdata, INT_EN); + temp &= (~INT_EN_RSFL_EN_); + smsc911x_reg_write(pdata, INT_EN, temp); + /* Schedule a NAPI poll */ + __napi_schedule(&pdata->napi); + } else { + SMSC_WARN(pdata, rx_err, "napi_schedule_prep failed"); + } + serviced = IRQ_HANDLED; + } + + return serviced; +} + +#ifdef CONFIG_NET_POLL_CONTROLLER +static void smsc911x_poll_controller(struct net_device *dev) +{ + disable_irq(dev->irq); + smsc911x_irqhandler(0, dev); + enable_irq(dev->irq); +} +#endif /* CONFIG_NET_POLL_CONTROLLER */ + +static int smsc911x_set_mac_address(struct net_device *dev, void *p) +{ + struct smsc911x_data *pdata = netdev_priv(dev); + struct sockaddr *addr = p; + + /* On older hardware revisions we cannot change the mac address + * registers while receiving data. Newer devices can safely change + * this at any time. */ + if (pdata->generation <= 1 && netif_running(dev)) + return -EBUSY; + + if (!is_valid_ether_addr(addr->sa_data)) + return -EADDRNOTAVAIL; + + memcpy(dev->dev_addr, addr->sa_data, ETH_ALEN); + + spin_lock_irq(&pdata->mac_lock); + smsc911x_set_hw_mac_address(pdata, dev->dev_addr); + spin_unlock_irq(&pdata->mac_lock); + + netdev_info(dev, "MAC Address: %pM\n", dev->dev_addr); + + return 0; +} + +/* Standard ioctls for mii-tool */ +static int smsc911x_do_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd) +{ + struct smsc911x_data *pdata = netdev_priv(dev); + + if (!netif_running(dev) || !pdata->phy_dev) + return -EINVAL; + + return phy_mii_ioctl(pdata->phy_dev, ifr, cmd); +} + +static int +smsc911x_ethtool_getsettings(struct net_device *dev, struct ethtool_cmd *cmd) +{ + struct smsc911x_data *pdata = netdev_priv(dev); + + cmd->maxtxpkt = 1; + cmd->maxrxpkt = 1; + return phy_ethtool_gset(pdata->phy_dev, cmd); +} + +static int +smsc911x_ethtool_setsettings(struct net_device *dev, struct ethtool_cmd *cmd) +{ + struct smsc911x_data *pdata = netdev_priv(dev); + + return phy_ethtool_sset(pdata->phy_dev, cmd); +} + +static void smsc911x_ethtool_getdrvinfo(struct net_device *dev, + struct ethtool_drvinfo *info) +{ + strlcpy(info->driver, SMSC_CHIPNAME, sizeof(info->driver)); + strlcpy(info->version, SMSC_DRV_VERSION, sizeof(info->version)); + strlcpy(info->bus_info, dev_name(dev->dev.parent), + sizeof(info->bus_info)); +} + +static int smsc911x_ethtool_nwayreset(struct net_device *dev) +{ + struct smsc911x_data *pdata = netdev_priv(dev); + + return phy_start_aneg(pdata->phy_dev); +} + +static u32 smsc911x_ethtool_getmsglevel(struct net_device *dev) +{ + struct smsc911x_data *pdata = netdev_priv(dev); + return pdata->msg_enable; +} + +static void smsc911x_ethtool_setmsglevel(struct net_device *dev, u32 level) +{ + struct smsc911x_data *pdata = netdev_priv(dev); + pdata->msg_enable = level; +} + +static int smsc911x_ethtool_getregslen(struct net_device *dev) +{ + return (((E2P_DATA - ID_REV) / 4 + 1) + (WUCSR - MAC_CR) + 1 + 32) * + sizeof(u32); +} + +static void +smsc911x_ethtool_getregs(struct net_device *dev, struct ethtool_regs *regs, + void *buf) +{ + struct smsc911x_data *pdata = netdev_priv(dev); + struct phy_device *phy_dev = pdata->phy_dev; + unsigned long flags; + unsigned int i; + unsigned int j = 0; + u32 *data = buf; + + regs->version = pdata->idrev; + for (i = ID_REV; i <= E2P_DATA; i += (sizeof(u32))) + data[j++] = smsc911x_reg_read(pdata, i); + + for (i = MAC_CR; i <= WUCSR; i++) { + spin_lock_irqsave(&pdata->mac_lock, flags); + data[j++] = smsc911x_mac_read(pdata, i); + spin_unlock_irqrestore(&pdata->mac_lock, flags); + } + + for (i = 0; i <= 31; i++) + data[j++] = smsc911x_mii_read(phy_dev->bus, phy_dev->addr, i); +} + +static void smsc911x_eeprom_enable_access(struct smsc911x_data *pdata) +{ + unsigned int temp = smsc911x_reg_read(pdata, GPIO_CFG); + temp &= ~GPIO_CFG_EEPR_EN_; + smsc911x_reg_write(pdata, GPIO_CFG, temp); + msleep(1); +} + +static int smsc911x_eeprom_send_cmd(struct smsc911x_data *pdata, u32 op) +{ + int timeout = 100; + u32 e2cmd; + + SMSC_TRACE(pdata, drv, "op 0x%08x", op); + if (smsc911x_reg_read(pdata, E2P_CMD) & E2P_CMD_EPC_BUSY_) { + SMSC_WARN(pdata, drv, "Busy at start"); + return -EBUSY; + } + + e2cmd = op | E2P_CMD_EPC_BUSY_; + smsc911x_reg_write(pdata, E2P_CMD, e2cmd); + + do { + msleep(1); + e2cmd = smsc911x_reg_read(pdata, E2P_CMD); + } while ((e2cmd & E2P_CMD_EPC_BUSY_) && (--timeout)); + + if (!timeout) { + SMSC_TRACE(pdata, drv, "TIMED OUT"); + return -EAGAIN; + } + + if (e2cmd & E2P_CMD_EPC_TIMEOUT_) { + SMSC_TRACE(pdata, drv, "Error occurred during eeprom operation"); + return -EINVAL; + } + + return 0; +} + +static int smsc911x_eeprom_read_location(struct smsc911x_data *pdata, + u8 address, u8 *data) +{ + u32 op = E2P_CMD_EPC_CMD_READ_ | address; + int ret; + + SMSC_TRACE(pdata, drv, "address 0x%x", address); + ret = smsc911x_eeprom_send_cmd(pdata, op); + + if (!ret) + data[address] = smsc911x_reg_read(pdata, E2P_DATA); + + return ret; +} + +static int smsc911x_eeprom_write_location(struct smsc911x_data *pdata, + u8 address, u8 data) +{ + u32 op = E2P_CMD_EPC_CMD_ERASE_ | address; + u32 temp; + int ret; + + SMSC_TRACE(pdata, drv, "address 0x%x, data 0x%x", address, data); + ret = smsc911x_eeprom_send_cmd(pdata, op); + + if (!ret) { + op = E2P_CMD_EPC_CMD_WRITE_ | address; + smsc911x_reg_write(pdata, E2P_DATA, (u32)data); + + /* Workaround for hardware read-after-write restriction */ + temp = smsc911x_reg_read(pdata, BYTE_TEST); + + ret = smsc911x_eeprom_send_cmd(pdata, op); + } + + return ret; +} + +static int smsc911x_ethtool_get_eeprom_len(struct net_device *dev) +{ + return SMSC911X_EEPROM_SIZE; +} + +static int smsc911x_ethtool_get_eeprom(struct net_device *dev, + struct ethtool_eeprom *eeprom, u8 *data) +{ + struct smsc911x_data *pdata = netdev_priv(dev); + u8 eeprom_data[SMSC911X_EEPROM_SIZE]; + int len; + int i; + + smsc911x_eeprom_enable_access(pdata); + + len = min(eeprom->len, SMSC911X_EEPROM_SIZE); + for (i = 0; i < len; i++) { + int ret = smsc911x_eeprom_read_location(pdata, i, eeprom_data); + if (ret < 0) { + eeprom->len = 0; + return ret; + } + } + + memcpy(data, &eeprom_data[eeprom->offset], len); + eeprom->len = len; + return 0; +} + +static int smsc911x_ethtool_set_eeprom(struct net_device *dev, + struct ethtool_eeprom *eeprom, u8 *data) +{ + int ret; + struct smsc911x_data *pdata = netdev_priv(dev); + + smsc911x_eeprom_enable_access(pdata); + smsc911x_eeprom_send_cmd(pdata, E2P_CMD_EPC_CMD_EWEN_); + ret = smsc911x_eeprom_write_location(pdata, eeprom->offset, *data); + smsc911x_eeprom_send_cmd(pdata, E2P_CMD_EPC_CMD_EWDS_); + + /* Single byte write, according to man page */ + eeprom->len = 1; + + return ret; +} + +static const struct ethtool_ops smsc911x_ethtool_ops = { + .get_settings = smsc911x_ethtool_getsettings, + .set_settings = smsc911x_ethtool_setsettings, + .get_link = ethtool_op_get_link, + .get_drvinfo = smsc911x_ethtool_getdrvinfo, + .nway_reset = smsc911x_ethtool_nwayreset, + .get_msglevel = smsc911x_ethtool_getmsglevel, + .set_msglevel = smsc911x_ethtool_setmsglevel, + .get_regs_len = smsc911x_ethtool_getregslen, + .get_regs = smsc911x_ethtool_getregs, + .get_eeprom_len = smsc911x_ethtool_get_eeprom_len, + .get_eeprom = smsc911x_ethtool_get_eeprom, + .set_eeprom = smsc911x_ethtool_set_eeprom, + .get_ts_info = ethtool_op_get_ts_info, +}; + +static const struct net_device_ops smsc911x_netdev_ops = { + .ndo_open = smsc911x_open, + .ndo_stop = smsc911x_stop, + .ndo_start_xmit = smsc911x_hard_start_xmit, + .ndo_get_stats = smsc911x_get_stats, + .ndo_set_rx_mode = smsc911x_set_multicast_list, + .ndo_do_ioctl = smsc911x_do_ioctl, + .ndo_change_mtu = eth_change_mtu, + .ndo_validate_addr = eth_validate_addr, + .ndo_set_mac_address = smsc911x_set_mac_address, +#ifdef CONFIG_NET_POLL_CONTROLLER + .ndo_poll_controller = smsc911x_poll_controller, +#endif +}; + +/* copies the current mac address from hardware to dev->dev_addr */ +static void smsc911x_read_mac_address(struct net_device *dev) +{ + struct smsc911x_data *pdata = netdev_priv(dev); + u32 mac_high16 = smsc911x_mac_read(pdata, ADDRH); + u32 mac_low32 = smsc911x_mac_read(pdata, ADDRL); + + dev->dev_addr[0] = (u8)(mac_low32); + dev->dev_addr[1] = (u8)(mac_low32 >> 8); + dev->dev_addr[2] = (u8)(mac_low32 >> 16); + dev->dev_addr[3] = (u8)(mac_low32 >> 24); + dev->dev_addr[4] = (u8)(mac_high16); + dev->dev_addr[5] = (u8)(mac_high16 >> 8); +} + +/* Initializing private device structures, only called from probe */ +static int smsc911x_init(struct net_device *dev) +{ + struct smsc911x_data *pdata = netdev_priv(dev); + unsigned int byte_test, mask; + unsigned int to = 100; + + SMSC_TRACE(pdata, probe, "Driver Parameters:"); + SMSC_TRACE(pdata, probe, "LAN base: 0x%08lX", + (unsigned long)pdata->ioaddr); + SMSC_TRACE(pdata, probe, "IRQ: %d", dev->irq); + SMSC_TRACE(pdata, probe, "PHY will be autodetected."); + + spin_lock_init(&pdata->dev_lock); + spin_lock_init(&pdata->mac_lock); + + if (pdata->ioaddr == NULL) { + SMSC_WARN(pdata, probe, "pdata->ioaddr: 0x00000000"); + return -ENODEV; + } + + /* + * poll the READY bit in PMT_CTRL. Any other access to the device is + * forbidden while this bit isn't set. Try for 100ms + * + * Note that this test is done before the WORD_SWAP register is + * programmed. So in some configurations the READY bit is at 16 before + * WORD_SWAP is written to. This issue is worked around by waiting + * until either bit 0 or bit 16 gets set in PMT_CTRL. + * + * SMSC has confirmed that checking bit 16 (marked as reserved in + * the datasheet) is fine since these bits "will either never be set + * or can only go high after READY does (so also indicate the device + * is ready)". + */ + + mask = PMT_CTRL_READY_ | swahw32(PMT_CTRL_READY_); + while (!(smsc911x_reg_read(pdata, PMT_CTRL) & mask) && --to) + udelay(1000); + + if (to == 0) { + netdev_err(dev, "Device not READY in 100ms aborting\n"); + return -ENODEV; + } + + /* Check byte ordering */ + byte_test = smsc911x_reg_read(pdata, BYTE_TEST); + SMSC_TRACE(pdata, probe, "BYTE_TEST: 0x%08X", byte_test); + if (byte_test == 0x43218765) { + SMSC_TRACE(pdata, probe, "BYTE_TEST looks swapped, " + "applying WORD_SWAP"); + smsc911x_reg_write(pdata, WORD_SWAP, 0xffffffff); + + /* 1 dummy read of BYTE_TEST is needed after a write to + * WORD_SWAP before its contents are valid */ + byte_test = smsc911x_reg_read(pdata, BYTE_TEST); + + byte_test = smsc911x_reg_read(pdata, BYTE_TEST); + } + + if (byte_test != 0x87654321) { + SMSC_WARN(pdata, drv, "BYTE_TEST: 0x%08X", byte_test); + if (((byte_test >> 16) & 0xFFFF) == (byte_test & 0xFFFF)) { + SMSC_WARN(pdata, probe, + "top 16 bits equal to bottom 16 bits"); + SMSC_TRACE(pdata, probe, + "This may mean the chip is set " + "for 32 bit while the bus is reading 16 bit"); + } + return -ENODEV; + } + + /* Default generation to zero (all workarounds apply) */ + pdata->generation = 0; + + pdata->idrev = smsc911x_reg_read(pdata, ID_REV); + switch (pdata->idrev & 0xFFFF0000) { + case 0x01180000: + case 0x01170000: + case 0x01160000: + case 0x01150000: + case 0x218A0000: + /* LAN911[5678] family */ + pdata->generation = pdata->idrev & 0x0000FFFF; + break; + + case 0x118A0000: + case 0x117A0000: + case 0x116A0000: + case 0x115A0000: + /* LAN921[5678] family */ + pdata->generation = 3; + break; + + case 0x92100000: + case 0x92110000: + case 0x92200000: + case 0x92210000: + /* LAN9210/LAN9211/LAN9220/LAN9221 */ + pdata->generation = 4; + break; + + default: + SMSC_WARN(pdata, probe, "LAN911x not identified, idrev: 0x%08X", + pdata->idrev); + return -ENODEV; + } + + SMSC_TRACE(pdata, probe, + "LAN911x identified, idrev: 0x%08X, generation: %d", + pdata->idrev, pdata->generation); + + if (pdata->generation == 0) + SMSC_WARN(pdata, probe, + "This driver is not intended for this chip revision"); + + /* workaround for platforms without an eeprom, where the mac address + * is stored elsewhere and set by the bootloader. This saves the + * mac address before resetting the device */ + if (pdata->config.flags & SMSC911X_SAVE_MAC_ADDRESS) { + spin_lock_irq(&pdata->mac_lock); + smsc911x_read_mac_address(dev); + spin_unlock_irq(&pdata->mac_lock); + } + + /* Reset the LAN911x */ + if (smsc911x_soft_reset(pdata)) + return -ENODEV; + + dev->flags |= IFF_MULTICAST; + netif_napi_add(dev, &pdata->napi, smsc911x_poll, SMSC_NAPI_WEIGHT); + dev->netdev_ops = &smsc911x_netdev_ops; + dev->ethtool_ops = &smsc911x_ethtool_ops; + + return 0; +} + +static int smsc911x_drv_remove(struct platform_device *pdev) +{ + struct net_device *dev; + struct smsc911x_data *pdata; + struct resource *res; + + dev = platform_get_drvdata(pdev); + BUG_ON(!dev); + pdata = netdev_priv(dev); + BUG_ON(!pdata); + BUG_ON(!pdata->ioaddr); + BUG_ON(!pdata->phy_dev); + + SMSC_TRACE(pdata, ifdown, "Stopping driver"); + + phy_disconnect(pdata->phy_dev); + pdata->phy_dev = NULL; + mdiobus_unregister(pdata->mii_bus); + mdiobus_free(pdata->mii_bus); + + unregister_netdev(dev); + free_irq(dev->irq, dev); + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, + "smsc911x-memory"); + if (!res) + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + + release_mem_region(res->start, resource_size(res)); + + iounmap(pdata->ioaddr); + + (void)smsc911x_disable_resources(pdev); + smsc911x_free_resources(pdev); + + free_netdev(dev); + + pm_runtime_put(&pdev->dev); + pm_runtime_disable(&pdev->dev); + + return 0; +} + +/* standard register acces */ +static const struct smsc911x_ops standard_smsc911x_ops = { + .reg_read = __smsc911x_reg_read, + .reg_write = __smsc911x_reg_write, + .rx_readfifo = smsc911x_rx_readfifo, + .tx_writefifo = smsc911x_tx_writefifo, +}; + +/* shifted register access */ +static const struct smsc911x_ops shifted_smsc911x_ops = { + .reg_read = __smsc911x_reg_read_shift, + .reg_write = __smsc911x_reg_write_shift, + .rx_readfifo = smsc911x_rx_readfifo_shift, + .tx_writefifo = smsc911x_tx_writefifo_shift, +}; + +#ifdef CONFIG_OF +static int smsc911x_probe_config_dt(struct smsc911x_platform_config *config, + struct device_node *np) +{ + const char *mac; + u32 width = 0; + + if (!np) + return -ENODEV; + + config->phy_interface = of_get_phy_mode(np); + + mac = of_get_mac_address(np); + if (mac) + memcpy(config->mac, mac, ETH_ALEN); + + of_property_read_u32(np, "reg-shift", &config->shift); + + of_property_read_u32(np, "reg-io-width", &width); + if (width == 4) + config->flags |= SMSC911X_USE_32BIT; + else + config->flags |= SMSC911X_USE_16BIT; + + if (of_get_property(np, "smsc,irq-active-high", NULL)) + config->irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_HIGH; + + if (of_get_property(np, "smsc,irq-push-pull", NULL)) + config->irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL; + + if (of_get_property(np, "smsc,force-internal-phy", NULL)) + config->flags |= SMSC911X_FORCE_INTERNAL_PHY; + + if (of_get_property(np, "smsc,force-external-phy", NULL)) + config->flags |= SMSC911X_FORCE_EXTERNAL_PHY; + + if (of_get_property(np, "smsc,save-mac-address", NULL)) + config->flags |= SMSC911X_SAVE_MAC_ADDRESS; + + return 0; +} +#else +static inline int smsc911x_probe_config_dt( + struct smsc911x_platform_config *config, + struct device_node *np) +{ + return -ENODEV; +} +#endif /* CONFIG_OF */ + +static int smsc911x_drv_probe(struct platform_device *pdev) +{ + struct device_node *np = pdev->dev.of_node; + struct net_device *dev; + struct smsc911x_data *pdata; + struct smsc911x_platform_config *config = dev_get_platdata(&pdev->dev); + struct resource *res; + unsigned int intcfg = 0; + int res_size, irq, irq_flags; + int retval; + + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, + "smsc911x-memory"); + if (!res) + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) { + pr_warn("Could not allocate resource\n"); + retval = -ENODEV; + goto out_0; + } + res_size = resource_size(res); + + irq = platform_get_irq(pdev, 0); + if (irq <= 0) { + pr_warn("Could not allocate irq resource\n"); + retval = -ENODEV; + goto out_0; + } + + if (!request_mem_region(res->start, res_size, SMSC_CHIPNAME)) { + retval = -EBUSY; + goto out_0; + } + + dev = alloc_etherdev(sizeof(struct smsc911x_data)); + if (!dev) { + retval = -ENOMEM; + goto out_release_io_1; + } + + SET_NETDEV_DEV(dev, &pdev->dev); + + pdata = netdev_priv(dev); + dev->irq = irq; + irq_flags = irq_get_trigger_type(irq); + pdata->ioaddr = ioremap_nocache(res->start, res_size); + + pdata->dev = dev; + pdata->msg_enable = ((1 << debug) - 1); + + platform_set_drvdata(pdev, dev); + + retval = smsc911x_request_resources(pdev); + if (retval) + goto out_request_resources_fail; + + retval = smsc911x_enable_resources(pdev); + if (retval) + goto out_enable_resources_fail; + + if (pdata->ioaddr == NULL) { + SMSC_WARN(pdata, probe, "Error smsc911x base address invalid"); + retval = -ENOMEM; + goto out_disable_resources; + } + + retval = smsc911x_probe_config_dt(&pdata->config, np); + if (retval && config) { + /* copy config parameters across to pdata */ + memcpy(&pdata->config, config, sizeof(pdata->config)); + retval = 0; + } + + if (retval) { + SMSC_WARN(pdata, probe, "Error smsc911x config not found"); + goto out_disable_resources; + } + + /* assume standard, non-shifted, access to HW registers */ + pdata->ops = &standard_smsc911x_ops; + /* apply the right access if shifting is needed */ + if (pdata->config.shift) + pdata->ops = &shifted_smsc911x_ops; + + pm_runtime_enable(&pdev->dev); + pm_runtime_get_sync(&pdev->dev); + + retval = smsc911x_init(dev); + if (retval < 0) + goto out_disable_resources; + + /* configure irq polarity and type before connecting isr */ + if (pdata->config.irq_polarity == SMSC911X_IRQ_POLARITY_ACTIVE_HIGH) + intcfg |= INT_CFG_IRQ_POL_; + + if (pdata->config.irq_type == SMSC911X_IRQ_TYPE_PUSH_PULL) + intcfg |= INT_CFG_IRQ_TYPE_; + + smsc911x_reg_write(pdata, INT_CFG, intcfg); + + /* Ensure interrupts are globally disabled before connecting ISR */ + smsc911x_disable_irq_chip(dev); + + retval = request_irq(dev->irq, smsc911x_irqhandler, + irq_flags | IRQF_SHARED, dev->name, dev); + if (retval) { + SMSC_WARN(pdata, probe, + "Unable to claim requested irq: %d", dev->irq); + goto out_disable_resources; + } + + netif_carrier_off(dev); + + retval = register_netdev(dev); + if (retval) { + SMSC_WARN(pdata, probe, "Error %i registering device", retval); + goto out_free_irq; + } else { + SMSC_TRACE(pdata, probe, + "Network interface: \"%s\"", dev->name); + } + + retval = smsc911x_mii_init(pdev, dev); + if (retval) { + SMSC_WARN(pdata, probe, "Error %i initialising mii", retval); + goto out_unregister_netdev_5; + } + + spin_lock_irq(&pdata->mac_lock); + + /* Check if mac address has been specified when bringing interface up */ + if (is_valid_ether_addr(dev->dev_addr)) { + smsc911x_set_hw_mac_address(pdata, dev->dev_addr); + SMSC_TRACE(pdata, probe, + "MAC Address is specified by configuration"); + } else if (is_valid_ether_addr(pdata->config.mac)) { + memcpy(dev->dev_addr, pdata->config.mac, ETH_ALEN); + SMSC_TRACE(pdata, probe, + "MAC Address specified by platform data"); + } else { + /* Try reading mac address from device. if EEPROM is present + * it will already have been set */ + smsc_get_mac(dev); + + if (is_valid_ether_addr(dev->dev_addr)) { + /* eeprom values are valid so use them */ + SMSC_TRACE(pdata, probe, + "Mac Address is read from LAN911x EEPROM"); + } else { + /* eeprom values are invalid, generate random MAC */ + eth_hw_addr_random(dev); + smsc911x_set_hw_mac_address(pdata, dev->dev_addr); + SMSC_TRACE(pdata, probe, + "MAC Address is set to eth_random_addr"); + } + } + + spin_unlock_irq(&pdata->mac_lock); + + netdev_info(dev, "MAC Address: %pM\n", dev->dev_addr); + + return 0; + +out_unregister_netdev_5: + unregister_netdev(dev); +out_free_irq: + free_irq(dev->irq, dev); +out_disable_resources: + pm_runtime_put(&pdev->dev); + pm_runtime_disable(&pdev->dev); + (void)smsc911x_disable_resources(pdev); +out_enable_resources_fail: + smsc911x_free_resources(pdev); +out_request_resources_fail: + iounmap(pdata->ioaddr); + free_netdev(dev); +out_release_io_1: + release_mem_region(res->start, resource_size(res)); +out_0: + return retval; +} + +#ifdef CONFIG_PM +/* This implementation assumes the devices remains powered on its VDDVARIO + * pins during suspend. */ + +/* TODO: implement freeze/thaw callbacks for hibernation.*/ + +static int smsc911x_suspend(struct device *dev) +{ + struct net_device *ndev = dev_get_drvdata(dev); + struct smsc911x_data *pdata = netdev_priv(ndev); + + /* enable wake on LAN, energy detection and the external PME + * signal. */ + smsc911x_reg_write(pdata, PMT_CTRL, + PMT_CTRL_PM_MODE_D1_ | PMT_CTRL_WOL_EN_ | + PMT_CTRL_ED_EN_ | PMT_CTRL_PME_EN_); + + return 0; +} + +static int smsc911x_resume(struct device *dev) +{ + struct net_device *ndev = dev_get_drvdata(dev); + struct smsc911x_data *pdata = netdev_priv(ndev); + unsigned int to = 100; + + /* Note 3.11 from the datasheet: + * "When the LAN9220 is in a power saving state, a write of any + * data to the BYTE_TEST register will wake-up the device." + */ + smsc911x_reg_write(pdata, BYTE_TEST, 0); + + /* poll the READY bit in PMT_CTRL. Any other access to the device is + * forbidden while this bit isn't set. Try for 100ms and return -EIO + * if it failed. */ + while (!(smsc911x_reg_read(pdata, PMT_CTRL) & PMT_CTRL_READY_) && --to) + udelay(1000); + + return (to == 0) ? -EIO : 0; +} + +static const struct dev_pm_ops smsc911x_pm_ops = { + .suspend = smsc911x_suspend, + .resume = smsc911x_resume, +}; + +#define SMSC911X_PM_OPS (&smsc911x_pm_ops) + +#else +#define SMSC911X_PM_OPS NULL +#endif + +#ifdef CONFIG_OF +static const struct of_device_id smsc911x_dt_ids[] = { + { .compatible = "smsc,lan9115", }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(of, smsc911x_dt_ids); +#endif + +static struct platform_driver smsc911x_driver = { + .probe = smsc911x_drv_probe, + .remove = smsc911x_drv_remove, + .driver = { + .name = SMSC_CHIPNAME, + .pm = SMSC911X_PM_OPS, + .of_match_table = of_match_ptr(smsc911x_dt_ids), + }, +}; + +/* Entry point for loading the module */ +static int __init smsc911x_init_module(void) +{ + SMSC_INITIALIZE(); + return platform_driver_register(&smsc911x_driver); +} + +/* entry point for unloading the module */ +static void __exit smsc911x_cleanup_module(void) +{ + platform_driver_unregister(&smsc911x_driver); +} + +module_init(smsc911x_init_module); +module_exit(smsc911x_cleanup_module); |