diff options
Diffstat (limited to 'kernel/drivers/net/ethernet/sfc/tenxpress.c')
| -rw-r--r-- | kernel/drivers/net/ethernet/sfc/tenxpress.c | 494 |
1 files changed, 494 insertions, 0 deletions
diff --git a/kernel/drivers/net/ethernet/sfc/tenxpress.c b/kernel/drivers/net/ethernet/sfc/tenxpress.c new file mode 100644 index 000000000..2c90e6b31 --- /dev/null +++ b/kernel/drivers/net/ethernet/sfc/tenxpress.c @@ -0,0 +1,494 @@ +/**************************************************************************** + * Driver for Solarflare network controllers and boards + * Copyright 2007-2011 Solarflare Communications Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation, incorporated herein by reference. + */ + +#include <linux/delay.h> +#include <linux/rtnetlink.h> +#include <linux/seq_file.h> +#include <linux/slab.h> +#include "efx.h" +#include "mdio_10g.h" +#include "nic.h" +#include "phy.h" +#include "workarounds.h" + +/* We expect these MMDs to be in the package. */ +#define TENXPRESS_REQUIRED_DEVS (MDIO_DEVS_PMAPMD | \ + MDIO_DEVS_PCS | \ + MDIO_DEVS_PHYXS | \ + MDIO_DEVS_AN) + +#define SFX7101_LOOPBACKS ((1 << LOOPBACK_PHYXS) | \ + (1 << LOOPBACK_PCS) | \ + (1 << LOOPBACK_PMAPMD) | \ + (1 << LOOPBACK_PHYXS_WS)) + +/* We complain if we fail to see the link partner as 10G capable this many + * times in a row (must be > 1 as sampling the autoneg. registers is racy) + */ +#define MAX_BAD_LP_TRIES (5) + +/* Extended control register */ +#define PMA_PMD_XCONTROL_REG 49152 +#define PMA_PMD_EXT_GMII_EN_LBN 1 +#define PMA_PMD_EXT_GMII_EN_WIDTH 1 +#define PMA_PMD_EXT_CLK_OUT_LBN 2 +#define PMA_PMD_EXT_CLK_OUT_WIDTH 1 +#define PMA_PMD_LNPGA_POWERDOWN_LBN 8 +#define PMA_PMD_LNPGA_POWERDOWN_WIDTH 1 +#define PMA_PMD_EXT_CLK312_WIDTH 1 +#define PMA_PMD_EXT_LPOWER_LBN 12 +#define PMA_PMD_EXT_LPOWER_WIDTH 1 +#define PMA_PMD_EXT_ROBUST_LBN 14 +#define PMA_PMD_EXT_ROBUST_WIDTH 1 +#define PMA_PMD_EXT_SSR_LBN 15 +#define PMA_PMD_EXT_SSR_WIDTH 1 + +/* extended status register */ +#define PMA_PMD_XSTATUS_REG 49153 +#define PMA_PMD_XSTAT_MDIX_LBN 14 +#define PMA_PMD_XSTAT_FLP_LBN (12) + +/* LED control register */ +#define PMA_PMD_LED_CTRL_REG 49159 +#define PMA_PMA_LED_ACTIVITY_LBN (3) + +/* LED function override register */ +#define PMA_PMD_LED_OVERR_REG 49161 +/* Bit positions for different LEDs (there are more but not wired on SFE4001)*/ +#define PMA_PMD_LED_LINK_LBN (0) +#define PMA_PMD_LED_SPEED_LBN (2) +#define PMA_PMD_LED_TX_LBN (4) +#define PMA_PMD_LED_RX_LBN (6) +/* Override settings */ +#define PMA_PMD_LED_AUTO (0) /* H/W control */ +#define PMA_PMD_LED_ON (1) +#define PMA_PMD_LED_OFF (2) +#define PMA_PMD_LED_FLASH (3) +#define PMA_PMD_LED_MASK 3 +/* All LEDs under hardware control */ +/* Green and Amber under hardware control, Red off */ +#define SFX7101_PMA_PMD_LED_DEFAULT (PMA_PMD_LED_OFF << PMA_PMD_LED_RX_LBN) + +#define PMA_PMD_SPEED_ENABLE_REG 49192 +#define PMA_PMD_100TX_ADV_LBN 1 +#define PMA_PMD_100TX_ADV_WIDTH 1 +#define PMA_PMD_1000T_ADV_LBN 2 +#define PMA_PMD_1000T_ADV_WIDTH 1 +#define PMA_PMD_10000T_ADV_LBN 3 +#define PMA_PMD_10000T_ADV_WIDTH 1 +#define PMA_PMD_SPEED_LBN 4 +#define PMA_PMD_SPEED_WIDTH 4 + +/* Misc register defines */ +#define PCS_CLOCK_CTRL_REG 55297 +#define PLL312_RST_N_LBN 2 + +#define PCS_SOFT_RST2_REG 55302 +#define SERDES_RST_N_LBN 13 +#define XGXS_RST_N_LBN 12 + +#define PCS_TEST_SELECT_REG 55303 /* PRM 10.5.8 */ +#define CLK312_EN_LBN 3 + +/* PHYXS registers */ +#define PHYXS_XCONTROL_REG 49152 +#define PHYXS_RESET_LBN 15 +#define PHYXS_RESET_WIDTH 1 + +#define PHYXS_TEST1 (49162) +#define LOOPBACK_NEAR_LBN (8) +#define LOOPBACK_NEAR_WIDTH (1) + +/* Boot status register */ +#define PCS_BOOT_STATUS_REG 53248 +#define PCS_BOOT_FATAL_ERROR_LBN 0 +#define PCS_BOOT_PROGRESS_LBN 1 +#define PCS_BOOT_PROGRESS_WIDTH 2 +#define PCS_BOOT_PROGRESS_INIT 0 +#define PCS_BOOT_PROGRESS_WAIT_MDIO 1 +#define PCS_BOOT_PROGRESS_CHECKSUM 2 +#define PCS_BOOT_PROGRESS_JUMP 3 +#define PCS_BOOT_DOWNLOAD_WAIT_LBN 3 +#define PCS_BOOT_CODE_STARTED_LBN 4 + +/* 100M/1G PHY registers */ +#define GPHY_XCONTROL_REG 49152 +#define GPHY_ISOLATE_LBN 10 +#define GPHY_ISOLATE_WIDTH 1 +#define GPHY_DUPLEX_LBN 8 +#define GPHY_DUPLEX_WIDTH 1 +#define GPHY_LOOPBACK_NEAR_LBN 14 +#define GPHY_LOOPBACK_NEAR_WIDTH 1 + +#define C22EXT_STATUS_REG 49153 +#define C22EXT_STATUS_LINK_LBN 2 +#define C22EXT_STATUS_LINK_WIDTH 1 + +#define C22EXT_MSTSLV_CTRL 49161 +#define C22EXT_MSTSLV_CTRL_ADV_1000_HD_LBN 8 +#define C22EXT_MSTSLV_CTRL_ADV_1000_FD_LBN 9 + +#define C22EXT_MSTSLV_STATUS 49162 +#define C22EXT_MSTSLV_STATUS_LP_1000_HD_LBN 10 +#define C22EXT_MSTSLV_STATUS_LP_1000_FD_LBN 11 + +/* Time to wait between powering down the LNPGA and turning off the power + * rails */ +#define LNPGA_PDOWN_WAIT (HZ / 5) + +struct tenxpress_phy_data { + enum efx_loopback_mode loopback_mode; + enum efx_phy_mode phy_mode; + int bad_lp_tries; +}; + +static int tenxpress_init(struct efx_nic *efx) +{ + /* Enable 312.5 MHz clock */ + efx_mdio_write(efx, MDIO_MMD_PCS, PCS_TEST_SELECT_REG, + 1 << CLK312_EN_LBN); + + /* Set the LEDs up as: Green = Link, Amber = Link/Act, Red = Off */ + efx_mdio_set_flag(efx, MDIO_MMD_PMAPMD, PMA_PMD_LED_CTRL_REG, + 1 << PMA_PMA_LED_ACTIVITY_LBN, true); + efx_mdio_write(efx, MDIO_MMD_PMAPMD, PMA_PMD_LED_OVERR_REG, + SFX7101_PMA_PMD_LED_DEFAULT); + + return 0; +} + +static int tenxpress_phy_probe(struct efx_nic *efx) +{ + struct tenxpress_phy_data *phy_data; + + /* Allocate phy private storage */ + phy_data = kzalloc(sizeof(*phy_data), GFP_KERNEL); + if (!phy_data) + return -ENOMEM; + efx->phy_data = phy_data; + phy_data->phy_mode = efx->phy_mode; + + efx->mdio.mmds = TENXPRESS_REQUIRED_DEVS; + efx->mdio.mode_support = MDIO_SUPPORTS_C45; + + efx->loopback_modes = SFX7101_LOOPBACKS | FALCON_XMAC_LOOPBACKS; + + efx->link_advertising = (ADVERTISED_TP | ADVERTISED_Autoneg | + ADVERTISED_10000baseT_Full); + + return 0; +} + +static int tenxpress_phy_init(struct efx_nic *efx) +{ + int rc; + + falcon_board(efx)->type->init_phy(efx); + + if (!(efx->phy_mode & PHY_MODE_SPECIAL)) { + rc = efx_mdio_wait_reset_mmds(efx, TENXPRESS_REQUIRED_DEVS); + if (rc < 0) + return rc; + + rc = efx_mdio_check_mmds(efx, TENXPRESS_REQUIRED_DEVS); + if (rc < 0) + return rc; + } + + rc = tenxpress_init(efx); + if (rc < 0) + return rc; + + /* Reinitialise flow control settings */ + efx_link_set_wanted_fc(efx, efx->wanted_fc); + efx_mdio_an_reconfigure(efx); + + schedule_timeout_uninterruptible(HZ / 5); /* 200ms */ + + /* Let XGXS and SerDes out of reset */ + falcon_reset_xaui(efx); + + return 0; +} + +/* Perform a "special software reset" on the PHY. The caller is + * responsible for saving and restoring the PHY hardware registers + * properly, and masking/unmasking LASI */ +static int tenxpress_special_reset(struct efx_nic *efx) +{ + int rc, reg; + + /* The XGMAC clock is driven from the SFX7101 312MHz clock, so + * a special software reset can glitch the XGMAC sufficiently for stats + * requests to fail. */ + falcon_stop_nic_stats(efx); + + /* Initiate reset */ + reg = efx_mdio_read(efx, MDIO_MMD_PMAPMD, PMA_PMD_XCONTROL_REG); + reg |= (1 << PMA_PMD_EXT_SSR_LBN); + efx_mdio_write(efx, MDIO_MMD_PMAPMD, PMA_PMD_XCONTROL_REG, reg); + + mdelay(200); + + /* Wait for the blocks to come out of reset */ + rc = efx_mdio_wait_reset_mmds(efx, TENXPRESS_REQUIRED_DEVS); + if (rc < 0) + goto out; + + /* Try and reconfigure the device */ + rc = tenxpress_init(efx); + if (rc < 0) + goto out; + + /* Wait for the XGXS state machine to churn */ + mdelay(10); +out: + falcon_start_nic_stats(efx); + return rc; +} + +static void sfx7101_check_bad_lp(struct efx_nic *efx, bool link_ok) +{ + struct tenxpress_phy_data *pd = efx->phy_data; + bool bad_lp; + int reg; + + if (link_ok) { + bad_lp = false; + } else { + /* Check that AN has started but not completed. */ + reg = efx_mdio_read(efx, MDIO_MMD_AN, MDIO_STAT1); + if (!(reg & MDIO_AN_STAT1_LPABLE)) + return; /* LP status is unknown */ + bad_lp = !(reg & MDIO_AN_STAT1_COMPLETE); + if (bad_lp) + pd->bad_lp_tries++; + } + + /* Nothing to do if all is well and was previously so. */ + if (!pd->bad_lp_tries) + return; + + /* Use the RX (red) LED as an error indicator once we've seen AN + * failure several times in a row, and also log a message. */ + if (!bad_lp || pd->bad_lp_tries == MAX_BAD_LP_TRIES) { + reg = efx_mdio_read(efx, MDIO_MMD_PMAPMD, + PMA_PMD_LED_OVERR_REG); + reg &= ~(PMA_PMD_LED_MASK << PMA_PMD_LED_RX_LBN); + if (!bad_lp) { + reg |= PMA_PMD_LED_OFF << PMA_PMD_LED_RX_LBN; + } else { + reg |= PMA_PMD_LED_FLASH << PMA_PMD_LED_RX_LBN; + netif_err(efx, link, efx->net_dev, + "appears to be plugged into a port" + " that is not 10GBASE-T capable. The PHY" + " supports 10GBASE-T ONLY, so no link can" + " be established\n"); + } + efx_mdio_write(efx, MDIO_MMD_PMAPMD, + PMA_PMD_LED_OVERR_REG, reg); + pd->bad_lp_tries = bad_lp; + } +} + +static bool sfx7101_link_ok(struct efx_nic *efx) +{ + return efx_mdio_links_ok(efx, + MDIO_DEVS_PMAPMD | + MDIO_DEVS_PCS | + MDIO_DEVS_PHYXS); +} + +static void tenxpress_ext_loopback(struct efx_nic *efx) +{ + efx_mdio_set_flag(efx, MDIO_MMD_PHYXS, PHYXS_TEST1, + 1 << LOOPBACK_NEAR_LBN, + efx->loopback_mode == LOOPBACK_PHYXS); +} + +static void tenxpress_low_power(struct efx_nic *efx) +{ + efx_mdio_set_mmds_lpower( + efx, !!(efx->phy_mode & PHY_MODE_LOW_POWER), + TENXPRESS_REQUIRED_DEVS); +} + +static int tenxpress_phy_reconfigure(struct efx_nic *efx) +{ + struct tenxpress_phy_data *phy_data = efx->phy_data; + bool phy_mode_change, loop_reset; + + if (efx->phy_mode & (PHY_MODE_OFF | PHY_MODE_SPECIAL)) { + phy_data->phy_mode = efx->phy_mode; + return 0; + } + + phy_mode_change = (efx->phy_mode == PHY_MODE_NORMAL && + phy_data->phy_mode != PHY_MODE_NORMAL); + loop_reset = (LOOPBACK_OUT_OF(phy_data, efx, LOOPBACKS_EXTERNAL(efx)) || + LOOPBACK_CHANGED(phy_data, efx, 1 << LOOPBACK_GPHY)); + + if (loop_reset || phy_mode_change) { + tenxpress_special_reset(efx); + falcon_reset_xaui(efx); + } + + tenxpress_low_power(efx); + efx_mdio_transmit_disable(efx); + efx_mdio_phy_reconfigure(efx); + tenxpress_ext_loopback(efx); + efx_mdio_an_reconfigure(efx); + + phy_data->loopback_mode = efx->loopback_mode; + phy_data->phy_mode = efx->phy_mode; + + return 0; +} + +static void +tenxpress_get_settings(struct efx_nic *efx, struct ethtool_cmd *ecmd); + +/* Poll for link state changes */ +static bool tenxpress_phy_poll(struct efx_nic *efx) +{ + struct efx_link_state old_state = efx->link_state; + + efx->link_state.up = sfx7101_link_ok(efx); + efx->link_state.speed = 10000; + efx->link_state.fd = true; + efx->link_state.fc = efx_mdio_get_pause(efx); + + sfx7101_check_bad_lp(efx, efx->link_state.up); + + return !efx_link_state_equal(&efx->link_state, &old_state); +} + +static void sfx7101_phy_fini(struct efx_nic *efx) +{ + int reg; + + /* Power down the LNPGA */ + reg = (1 << PMA_PMD_LNPGA_POWERDOWN_LBN); + efx_mdio_write(efx, MDIO_MMD_PMAPMD, PMA_PMD_XCONTROL_REG, reg); + + /* Waiting here ensures that the board fini, which can turn + * off the power to the PHY, won't get run until the LNPGA + * powerdown has been given long enough to complete. */ + schedule_timeout_uninterruptible(LNPGA_PDOWN_WAIT); /* 200 ms */ +} + +static void tenxpress_phy_remove(struct efx_nic *efx) +{ + kfree(efx->phy_data); + efx->phy_data = NULL; +} + + +/* Override the RX, TX and link LEDs */ +void tenxpress_set_id_led(struct efx_nic *efx, enum efx_led_mode mode) +{ + int reg; + + switch (mode) { + case EFX_LED_OFF: + reg = (PMA_PMD_LED_OFF << PMA_PMD_LED_TX_LBN) | + (PMA_PMD_LED_OFF << PMA_PMD_LED_RX_LBN) | + (PMA_PMD_LED_OFF << PMA_PMD_LED_LINK_LBN); + break; + case EFX_LED_ON: + reg = (PMA_PMD_LED_ON << PMA_PMD_LED_TX_LBN) | + (PMA_PMD_LED_ON << PMA_PMD_LED_RX_LBN) | + (PMA_PMD_LED_ON << PMA_PMD_LED_LINK_LBN); + break; + default: + reg = SFX7101_PMA_PMD_LED_DEFAULT; + break; + } + + efx_mdio_write(efx, MDIO_MMD_PMAPMD, PMA_PMD_LED_OVERR_REG, reg); +} + +static const char *const sfx7101_test_names[] = { + "bist" +}; + +static const char *sfx7101_test_name(struct efx_nic *efx, unsigned int index) +{ + if (index < ARRAY_SIZE(sfx7101_test_names)) + return sfx7101_test_names[index]; + return NULL; +} + +static int +sfx7101_run_tests(struct efx_nic *efx, int *results, unsigned flags) +{ + int rc; + + if (!(flags & ETH_TEST_FL_OFFLINE)) + return 0; + + /* BIST is automatically run after a special software reset */ + rc = tenxpress_special_reset(efx); + results[0] = rc ? -1 : 1; + + efx_mdio_an_reconfigure(efx); + + return rc; +} + +static void +tenxpress_get_settings(struct efx_nic *efx, struct ethtool_cmd *ecmd) +{ + u32 adv = 0, lpa = 0; + int reg; + + reg = efx_mdio_read(efx, MDIO_MMD_AN, MDIO_AN_10GBT_CTRL); + if (reg & MDIO_AN_10GBT_CTRL_ADV10G) + adv |= ADVERTISED_10000baseT_Full; + reg = efx_mdio_read(efx, MDIO_MMD_AN, MDIO_AN_10GBT_STAT); + if (reg & MDIO_AN_10GBT_STAT_LP10G) + lpa |= ADVERTISED_10000baseT_Full; + + mdio45_ethtool_gset_npage(&efx->mdio, ecmd, adv, lpa); + + /* In loopback, the PHY automatically brings up the correct interface, + * but doesn't advertise the correct speed. So override it */ + if (LOOPBACK_EXTERNAL(efx)) + ethtool_cmd_speed_set(ecmd, SPEED_10000); +} + +static int tenxpress_set_settings(struct efx_nic *efx, struct ethtool_cmd *ecmd) +{ + if (!ecmd->autoneg) + return -EINVAL; + + return efx_mdio_set_settings(efx, ecmd); +} + +static void sfx7101_set_npage_adv(struct efx_nic *efx, u32 advertising) +{ + efx_mdio_set_flag(efx, MDIO_MMD_AN, MDIO_AN_10GBT_CTRL, + MDIO_AN_10GBT_CTRL_ADV10G, + advertising & ADVERTISED_10000baseT_Full); +} + +const struct efx_phy_operations falcon_sfx7101_phy_ops = { + .probe = tenxpress_phy_probe, + .init = tenxpress_phy_init, + .reconfigure = tenxpress_phy_reconfigure, + .poll = tenxpress_phy_poll, + .fini = sfx7101_phy_fini, + .remove = tenxpress_phy_remove, + .get_settings = tenxpress_get_settings, + .set_settings = tenxpress_set_settings, + .set_npage_adv = sfx7101_set_npage_adv, + .test_alive = efx_mdio_test_alive, + .test_name = sfx7101_test_name, + .run_tests = sfx7101_run_tests, +}; |