summaryrefslogtreecommitdiffstats
path: root/kernel/drivers/net/ethernet/qlogic/Kconfig
diff options
context:
space:
mode:
Diffstat (limited to 'kernel/drivers/net/ethernet/qlogic/Kconfig')
-rw-r--r--kernel/drivers/net/ethernet/qlogic/Kconfig96
1 files changed, 96 insertions, 0 deletions
diff --git a/kernel/drivers/net/ethernet/qlogic/Kconfig b/kernel/drivers/net/ethernet/qlogic/Kconfig
new file mode 100644
index 000000000..d49cba129
--- /dev/null
+++ b/kernel/drivers/net/ethernet/qlogic/Kconfig
@@ -0,0 +1,96 @@
+#
+# QLogic network device configuration
+#
+
+config NET_VENDOR_QLOGIC
+ bool "QLogic devices"
+ default y
+ depends on PCI
+ ---help---
+ If you have a network (Ethernet) card belonging to this class, say Y
+ and read the Ethernet-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>.
+
+ Note that the answer to this question doesn't directly affect the
+ kernel: saying N will just cause the configurator to skip all
+ the questions about QLogic cards. If you say Y, you will be asked for
+ your specific card in the following questions.
+
+if NET_VENDOR_QLOGIC
+
+config QLA3XXX
+ tristate "QLogic QLA3XXX Network Driver Support"
+ depends on PCI
+ ---help---
+ This driver supports QLogic ISP3XXX gigabit Ethernet cards.
+
+ To compile this driver as a module, choose M here: the module
+ will be called qla3xxx.
+
+config QLCNIC
+ tristate "QLOGIC QLCNIC 1/10Gb Converged Ethernet NIC Support"
+ depends on PCI
+ select FW_LOADER
+ ---help---
+ This driver supports QLogic QLE8240 and QLE8242 Converged Ethernet
+ devices.
+
+config QLCNIC_SRIOV
+ bool "QLOGIC QLCNIC 83XX family SR-IOV Support"
+ depends on QLCNIC && PCI_IOV
+ default y
+ ---help---
+ This configuration parameter enables Single Root Input Output
+ Virtualization support for QLE83XX Converged Ethernet devices.
+ This allows for virtual function acceleration in virtualized
+ environments.
+
+config QLCNIC_DCB
+ bool "QLOGIC QLCNIC 82XX and 83XX family DCB Support"
+ depends on QLCNIC && DCB
+ default y
+ ---help---
+ This configuration parameter enables DCB support in QLE83XX
+ and QLE82XX Converged Ethernet devices. This allows for DCB
+ get operations support through rtNetlink interface. Only CEE
+ mode of DCB is supported. PG and PFC values are related only
+ to Tx.
+
+config QLCNIC_VXLAN
+ bool "Virtual eXtensible Local Area Network (VXLAN) offload support"
+ default n
+ depends on QLCNIC && VXLAN && !(QLCNIC=y && VXLAN=m)
+ ---help---
+ This enables hardware offload support for VXLAN protocol over QLogic's
+ 84XX series adapters.
+ Say Y here if you want to enable hardware offload support for
+ Virtual eXtensible Local Area Network (VXLAN) in the driver.
+
+config QLCNIC_HWMON
+ bool "QLOGIC QLCNIC 82XX and 83XX family HWMON support"
+ depends on QLCNIC && HWMON && !(QLCNIC=y && HWMON=m)
+ default y
+ ---help---
+ This configuration parameter can be used to read the
+ board temperature in Converged Ethernet devices
+ supported by qlcnic.
+
+ This data is available via the hwmon sysfs interface.
+
+config QLGE
+ tristate "QLogic QLGE 10Gb Ethernet Driver Support"
+ depends on PCI
+ ---help---
+ This driver supports QLogic ISP8XXX 10Gb Ethernet cards.
+
+ To compile this driver as a module, choose M here: the module
+ will be called qlge.
+
+config NETXEN_NIC
+ tristate "NetXen Multi port (1/10) Gigabit Ethernet NIC"
+ depends on PCI
+ select FW_LOADER
+ ---help---
+ This enables the support for NetXen's Gigabit Ethernet card.
+
+endif # NET_VENDOR_QLOGIC