diff options
Diffstat (limited to 'kernel/drivers/net/ethernet/microchip/encx24j600_hw.h')
-rw-r--r-- | kernel/drivers/net/ethernet/microchip/encx24j600_hw.h | 437 |
1 files changed, 437 insertions, 0 deletions
diff --git a/kernel/drivers/net/ethernet/microchip/encx24j600_hw.h b/kernel/drivers/net/ethernet/microchip/encx24j600_hw.h new file mode 100644 index 000000000..4be73d555 --- /dev/null +++ b/kernel/drivers/net/ethernet/microchip/encx24j600_hw.h @@ -0,0 +1,437 @@ +/** + * encx24j600_hw.h: Register definitions + * + */ + +#ifndef _ENCX24J600_HW_H +#define _ENCX24J600_HW_H + +struct encx24j600_context { + struct spi_device *spi; + struct regmap *regmap; + struct regmap *phymap; + struct mutex mutex; /* mutex to protect access to regmap */ + int bank; +}; + +void devm_regmap_init_encx24j600(struct device *dev, + struct encx24j600_context *ctx); + +/* Single-byte instructions */ +#define BANK_SELECT(bank) (0xC0 | ((bank & (BANK_MASK >> BANK_SHIFT)) << 1)) +#define B0SEL 0xC0 /* Bank 0 Select */ +#define B1SEL 0xC2 /* Bank 1 Select */ +#define B2SEL 0xC4 /* Bank 2 Select */ +#define B3SEL 0xC6 /* Bank 3 Select */ +#define SETETHRST 0xCA /* System Reset */ +#define FCDISABLE 0xE0 /* Flow Control Disable */ +#define FCSINGLE 0xE2 /* Flow Control Single */ +#define FCMULTIPLE 0xE4 /* Flow Control Multiple */ +#define FCCLEAR 0xE6 /* Flow Control Clear */ +#define SETPKTDEC 0xCC /* Decrement Packet Counter */ +#define DMASTOP 0xD2 /* DMA Stop */ +#define DMACKSUM 0xD8 /* DMA Start Checksum */ +#define DMACKSUMS 0xDA /* DMA Start Checksum with Seed */ +#define DMACOPY 0xDC /* DMA Start Copy */ +#define DMACOPYS 0xDE /* DMA Start Copy and Checksum with Seed */ +#define SETTXRTS 0xD4 /* Request Packet Transmission */ +#define ENABLERX 0xE8 /* Enable RX */ +#define DISABLERX 0xEA /* Disable RX */ +#define SETEIE 0xEC /* Enable Interrupts */ +#define CLREIE 0xEE /* Disable Interrupts */ + +/* Two byte instructions */ +#define RBSEL 0xC8 /* Read Bank Select */ + +/* Three byte instructions */ +#define WGPRDPT 0x60 /* Write EGPRDPT */ +#define RGPRDPT 0x62 /* Read EGPRDPT */ +#define WRXRDPT 0x64 /* Write ERXRDPT */ +#define RRXRDPT 0x66 /* Read ERXRDPT */ +#define WUDARDPT 0x68 /* Write EUDARDPT */ +#define RUDARDPT 0x6A /* Read EUDARDPT */ +#define WGPWRPT 0x6C /* Write EGPWRPT */ +#define RGPWRPT 0x6E /* Read EGPWRPT */ +#define WRXWRPT 0x70 /* Write ERXWRPT */ +#define RRXWRPT 0x72 /* Read ERXWRPT */ +#define WUDAWRPT 0x74 /* Write EUDAWRPT */ +#define RUDAWRPT 0x76 /* Read EUDAWRPT */ + +/* n byte instructions */ +#define RCRCODE 0x00 +#define WCRCODE 0x40 +#define BFSCODE 0x80 +#define BFCCODE 0xA0 +#define RCR(addr) (RCRCODE | (addr & ADDR_MASK)) /* Read Control Register */ +#define WCR(addr) (WCRCODE | (addr & ADDR_MASK)) /* Write Control Register */ +#define RCRU 0x20 /* Read Control Register Unbanked */ +#define WCRU 0x22 /* Write Control Register Unbanked */ +#define BFS(addr) (BFSCODE | (addr & ADDR_MASK)) /* Bit Field Set */ +#define BFC(addr) (BFCCODE | (addr & ADDR_MASK)) /* Bit Field Clear */ +#define BFSU 0x24 /* Bit Field Set Unbanked */ +#define BFCU 0x26 /* Bit Field Clear Unbanked */ +#define RGPDATA 0x28 /* Read EGPDATA */ +#define WGPDATA 0x2A /* Write EGPDATA */ +#define RRXDATA 0x2C /* Read ERXDATA */ +#define WRXDATA 0x2E /* Write ERXDATA */ +#define RUDADATA 0x30 /* Read EUDADATA */ +#define WUDADATA 0x32 /* Write EUDADATA */ + +#define SFR_REG_COUNT 0xA0 + +/* ENC424J600 Control Registers + * Control register definitions are a combination of address + * and bank number + * - Register address (bits 0-4) + * - Bank number (bits 5-6) + */ +#define ADDR_MASK 0x1F +#define BANK_MASK 0x60 +#define BANK_SHIFT 5 + +/* All-bank registers */ +#define EUDAST 0x16 +#define EUDAND 0x18 +#define ESTAT 0x1A +#define EIR 0x1C +#define ECON1 0x1E + +/* Bank 0 registers */ +#define ETXST (0x00 | 0x00) +#define ETXLEN (0x02 | 0x00) +#define ERXST (0x04 | 0x00) +#define ERXTAIL (0x06 | 0x00) +#define ERXHEAD (0x08 | 0x00) +#define EDMAST (0x0A | 0x00) +#define EDMALEN (0x0C | 0x00) +#define EDMADST (0x0E | 0x00) +#define EDMACS (0x10 | 0x00) +#define ETXSTAT (0x12 | 0x00) +#define ETXWIRE (0x14 | 0x00) + +/* Bank 1 registers */ +#define EHT1 (0x00 | 0x20) +#define EHT2 (0x02 | 0x20) +#define EHT3 (0x04 | 0x20) +#define EHT4 (0x06 | 0x20) +#define EPMM1 (0x08 | 0x20) +#define EPMM2 (0x0A | 0x20) +#define EPMM3 (0x0C | 0x20) +#define EPMM4 (0x0E | 0x20) +#define EPMCS (0x10 | 0x20) +#define EPMO (0x12 | 0x20) +#define ERXFCON (0x14 | 0x20) + +/* Bank 2 registers */ +#define MACON1 (0x00 | 0x40) +#define MACON2 (0x02 | 0x40) +#define MABBIPG (0x04 | 0x40) +#define MAIPG (0x06 | 0x40) +#define MACLCON (0x08 | 0x40) +#define MAMXFL (0x0A | 0x40) +#define MICMD (0x12 | 0x40) +#define MIREGADR (0x14 | 0x40) + +/* Bank 3 registers */ +#define MAADR3 (0x00 | 0x60) +#define MAADR2 (0x02 | 0x60) +#define MAADR1 (0x04 | 0x60) +#define MIWR (0x06 | 0x60) +#define MIRD (0x08 | 0x60) +#define MISTAT (0x0A | 0x60) +#define EPAUS (0x0C | 0x60) +#define ECON2 (0x0E | 0x60) +#define ERXWM (0x10 | 0x60) +#define EIE (0x12 | 0x60) +#define EIDLED (0x14 | 0x60) + +/* Unbanked registers */ +#define EGPDATA (0x00 | 0x80) +#define ERXDATA (0x02 | 0x80) +#define EUDADATA (0x04 | 0x80) +#define EGPRDPT (0x06 | 0x80) +#define EGPWRPT (0x08 | 0x80) +#define ERXRDPT (0x0A | 0x80) +#define ERXWRPT (0x0C | 0x80) +#define EUDARDPT (0x0E | 0x80) +#define EUDAWRPT (0x10 | 0x80) + + +/* Register bit definitions */ +/* ESTAT */ +#define INT (1 << 15) +#define FCIDLE (1 << 14) +#define RXBUSY (1 << 13) +#define CLKRDY (1 << 12) +#define PHYDPX (1 << 10) +#define PHYLNK (1 << 8) + +/* EIR */ +#define CRYPTEN (1 << 15) +#define MODEXIF (1 << 14) +#define HASHIF (1 << 13) +#define AESIF (1 << 12) +#define LINKIF (1 << 11) +#define PKTIF (1 << 6) +#define DMAIF (1 << 5) +#define TXIF (1 << 3) +#define TXABTIF (1 << 2) +#define RXABTIF (1 << 1) +#define PCFULIF (1 << 0) + +/* ECON1 */ +#define MODEXST (1 << 15) +#define HASHEN (1 << 14) +#define HASHOP (1 << 13) +#define HASHLST (1 << 12) +#define AESST (1 << 11) +#define AESOP1 (1 << 10) +#define AESOP0 (1 << 9) +#define PKTDEC (1 << 8) +#define FCOP1 (1 << 7) +#define FCOP0 (1 << 6) +#define DMAST (1 << 5) +#define DMACPY (1 << 4) +#define DMACSSD (1 << 3) +#define DMANOCS (1 << 2) +#define TXRTS (1 << 1) +#define RXEN (1 << 0) + +/* ETXSTAT */ +#define LATECOL (1 << 10) +#define MAXCOL (1 << 9) +#define EXDEFER (1 << 8) +#define ETXSTATL_DEFER (1 << 7) +#define CRCBAD (1 << 4) +#define COLCNT_MASK 0xF + +/* ERXFCON */ +#define HTEN (1 << 15) +#define MPEN (1 << 14) +#define NOTPM (1 << 12) +#define PMEN3 (1 << 11) +#define PMEN2 (1 << 10) +#define PMEN1 (1 << 9) +#define PMEN0 (1 << 8) +#define CRCEEN (1 << 7) +#define CRCEN (1 << 6) +#define RUNTEEN (1 << 5) +#define RUNTEN (1 << 4) +#define UCEN (1 << 3) +#define NOTMEEN (1 << 2) +#define MCEN (1 << 1) +#define BCEN (1 << 0) + +/* MACON1 */ +#define LOOPBK (1 << 4) +#define RXPAUS (1 << 2) +#define PASSALL (1 << 1) + +/* MACON2 */ +#define MACON2_DEFER (1 << 14) +#define BPEN (1 << 13) +#define NOBKOFF (1 << 12) +#define PADCFG2 (1 << 7) +#define PADCFG1 (1 << 6) +#define PADCFG0 (1 << 5) +#define TXCRCEN (1 << 4) +#define PHDREN (1 << 3) +#define HFRMEN (1 << 2) +#define MACON2_RSV1 (1 << 1) +#define FULDPX (1 << 0) + +/* MAIPG */ +/* value of the high byte is given by the reserved bits, + * value of the low byte is recomended setting of the + * IPG parameter. + */ +#define MAIPGH_VAL 0x0C +#define MAIPGL_VAL 0x12 + +/* MIREGADRH */ +#define MIREGADR_VAL (1 << 8) + +/* MIREGADRL */ +#define PHREG_MASK 0x1F + +/* MICMD */ +#define MIISCAN (1 << 1) +#define MIIRD (1 << 0) + +/* MISTAT */ +#define NVALID (1 << 2) +#define SCAN (1 << 1) +#define BUSY (1 << 0) + +/* ECON2 */ +#define ETHEN (1 << 15) +#define STRCH (1 << 14) +#define TXMAC (1 << 13) +#define SHA1MD5 (1 << 12) +#define COCON3 (1 << 11) +#define COCON2 (1 << 10) +#define COCON1 (1 << 9) +#define COCON0 (1 << 8) +#define AUTOFC (1 << 7) +#define TXRST (1 << 6) +#define RXRST (1 << 5) +#define ETHRST (1 << 4) +#define MODLEN1 (1 << 3) +#define MODLEN0 (1 << 2) +#define AESLEN1 (1 << 1) +#define AESLEN0 (1 << 0) + +/* EIE */ +#define INTIE (1 << 15) +#define MODEXIE (1 << 14) +#define HASHIE (1 << 13) +#define AESIE (1 << 12) +#define LINKIE (1 << 11) +#define PKTIE (1 << 6) +#define DMAIE (1 << 5) +#define TXIE (1 << 3) +#define TXABTIE (1 << 2) +#define RXABTIE (1 << 1) +#define PCFULIE (1 << 0) + +/* EIDLED */ +#define LACFG3 (1 << 15) +#define LACFG2 (1 << 14) +#define LACFG1 (1 << 13) +#define LACFG0 (1 << 12) +#define LBCFG3 (1 << 11) +#define LBCFG2 (1 << 10) +#define LBCFG1 (1 << 9) +#define LBCFG0 (1 << 8) +#define DEVID_SHIFT 5 +#define DEVID_MASK (0x7 << DEVID_SHIFT) +#define REVID_SHIFT 0 +#define REVID_MASK (0x1F << REVID_SHIFT) + +/* PHY registers */ +#define PHCON1 0x00 +#define PHSTAT1 0x01 +#define PHANA 0x04 +#define PHANLPA 0x05 +#define PHANE 0x06 +#define PHCON2 0x11 +#define PHSTAT2 0x1B +#define PHSTAT3 0x1F + +/* PHCON1 */ +#define PRST (1 << 15) +#define PLOOPBK (1 << 14) +#define SPD100 (1 << 13) +#define ANEN (1 << 12) +#define PSLEEP (1 << 11) +#define RENEG (1 << 9) +#define PFULDPX (1 << 8) + +/* PHSTAT1 */ +#define FULL100 (1 << 14) +#define HALF100 (1 << 13) +#define FULL10 (1 << 12) +#define HALF10 (1 << 11) +#define ANDONE (1 << 5) +#define LRFAULT (1 << 4) +#define ANABLE (1 << 3) +#define LLSTAT (1 << 2) +#define EXTREGS (1 << 0) + +/* PHSTAT2 */ +#define PLRITY (1 << 4) + +/* PHSTAT3 */ +#define PHY3SPD100 (1 << 3) +#define PHY3DPX (1 << 4) +#define SPDDPX_SHIFT 2 +#define SPDDPX_MASK (0x7 << SPDDPX_SHIFT) + +/* PHANA */ +/* Default value for PHY initialization*/ +#define PHANA_DEFAULT 0x05E1 + +/* PHANE */ +#define PDFLT (1 << 4) +#define LPARCD (1 << 1) +#define LPANABL (1 << 0) + +#define EUDAST_TEST_VAL 0x1234 + +#define TSV_SIZE 7 + +#define ENCX24J600_DEV_ID 0x1 + +/* Configuration */ + +/* Led is on when the link is present and driven low + * temporarily when packet is TX'd or RX'd + */ +#define LED_A_SETTINGS 0xC + +/* Led is on if the link is in 100 Mbps mode */ +#define LED_B_SETTINGS 0x8 + +/* maximum ethernet frame length + * Currently not used as a limit anywhere + * (we're using the "huge frame enable" feature of + * enc424j600). + */ +#define MAX_FRAMELEN 1518 + +/* Size in bytes of the receive buffer in enc424j600. + * Must be word aligned (even). + */ +#define RX_BUFFER_SIZE (15 * MAX_FRAMELEN) + +/* Start of the general purpose area in sram */ +#define SRAM_GP_START 0x0 + +/* SRAM size */ +#define SRAM_SIZE 0x6000 + +/* Start of the receive buffer */ +#define ERXST_VAL (SRAM_SIZE - RX_BUFFER_SIZE) + +#define RSV_RXLONGEVDROPEV 16 +#define RSV_CARRIEREV 18 +#define RSV_CRCERROR 20 +#define RSV_LENCHECKERR 21 +#define RSV_LENOUTOFRANGE 22 +#define RSV_RXOK 23 +#define RSV_RXMULTICAST 24 +#define RSV_RXBROADCAST 25 +#define RSV_DRIBBLENIBBLE 26 +#define RSV_RXCONTROLFRAME 27 +#define RSV_RXPAUSEFRAME 28 +#define RSV_RXUNKNOWNOPCODE 29 +#define RSV_RXTYPEVLAN 30 + +#define RSV_RUNTFILTERMATCH 31 +#define RSV_NOTMEFILTERMATCH 32 +#define RSV_HASHFILTERMATCH 33 +#define RSV_MAGICPKTFILTERMATCH 34 +#define RSV_PTRNMTCHFILTERMATCH 35 +#define RSV_UNICASTFILTERMATCH 36 + +#define RSV_SIZE 8 +#define RSV_BITMASK(x) (1 << ((x) - 16)) +#define RSV_GETBIT(x, y) (((x) & RSV_BITMASK(y)) ? 1 : 0) + +struct rsv { + u16 next_packet; + u16 len; + u32 rxstat; +}; + +/* Put RX buffer at 0 as suggested by the Errata datasheet */ + +#define RXSTART_INIT ERXST_VAL +#define RXEND_INIT 0x5FFF + +int regmap_encx24j600_spi_write(void *context, u8 reg, const u8 *data, + size_t count); +int regmap_encx24j600_spi_read(void *context, u8 reg, u8 *data, size_t count); + + +#endif |