diff options
Diffstat (limited to 'kernel/drivers/net/ethernet/mellanox/mlx4/reset.c')
| -rw-r--r-- | kernel/drivers/net/ethernet/mellanox/mlx4/reset.c | 184 |
1 files changed, 184 insertions, 0 deletions
diff --git a/kernel/drivers/net/ethernet/mellanox/mlx4/reset.c b/kernel/drivers/net/ethernet/mellanox/mlx4/reset.c new file mode 100644 index 000000000..0076d8858 --- /dev/null +++ b/kernel/drivers/net/ethernet/mellanox/mlx4/reset.c @@ -0,0 +1,184 @@ +/* + * Copyright (c) 2006, 2007 Cisco Systems, Inc. All rights reserved. + * Copyright (c) 2007, 2008 Mellanox Technologies. All rights reserved. + * + * This software is available to you under a choice of one of two + * licenses. You may choose to be licensed under the terms of the GNU + * General Public License (GPL) Version 2, available from the file + * COPYING in the main directory of this source tree, or the + * OpenIB.org BSD license below: + * + * Redistribution and use in source and binary forms, with or + * without modification, are permitted provided that the following + * conditions are met: + * + * - Redistributions of source code must retain the above + * copyright notice, this list of conditions and the following + * disclaimer. + * + * - Redistributions in binary form must reproduce the above + * copyright notice, this list of conditions and the following + * disclaimer in the documentation and/or other materials + * provided with the distribution. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + */ + +#include <linux/errno.h> +#include <linux/pci.h> +#include <linux/delay.h> +#include <linux/slab.h> +#include <linux/jiffies.h> + +#include "mlx4.h" + +int mlx4_reset(struct mlx4_dev *dev) +{ + void __iomem *reset; + u32 *hca_header = NULL; + int pcie_cap; + u16 devctl; + u16 linkctl; + u16 vendor; + unsigned long end; + u32 sem; + int i; + int err = 0; + +#define MLX4_RESET_BASE 0xf0000 +#define MLX4_RESET_SIZE 0x400 +#define MLX4_SEM_OFFSET 0x3fc +#define MLX4_RESET_OFFSET 0x10 +#define MLX4_RESET_VALUE swab32(1) + +#define MLX4_SEM_TIMEOUT_JIFFIES (10 * HZ) +#define MLX4_RESET_TIMEOUT_JIFFIES (2 * HZ) + + /* + * Reset the chip. This is somewhat ugly because we have to + * save off the PCI header before reset and then restore it + * after the chip reboots. We skip config space offsets 22 + * and 23 since those have a special meaning. + */ + + /* Do we need to save off the full 4K PCI Express header?? */ + hca_header = kmalloc(256, GFP_KERNEL); + if (!hca_header) { + err = -ENOMEM; + mlx4_err(dev, "Couldn't allocate memory to save HCA PCI header, aborting\n"); + goto out; + } + + pcie_cap = pci_pcie_cap(dev->persist->pdev); + + for (i = 0; i < 64; ++i) { + if (i == 22 || i == 23) + continue; + if (pci_read_config_dword(dev->persist->pdev, i * 4, + hca_header + i)) { + err = -ENODEV; + mlx4_err(dev, "Couldn't save HCA PCI header, aborting\n"); + goto out; + } + } + + reset = ioremap(pci_resource_start(dev->persist->pdev, 0) + + MLX4_RESET_BASE, + MLX4_RESET_SIZE); + if (!reset) { + err = -ENOMEM; + mlx4_err(dev, "Couldn't map HCA reset register, aborting\n"); + goto out; + } + + /* grab HW semaphore to lock out flash updates */ + end = jiffies + MLX4_SEM_TIMEOUT_JIFFIES; + do { + sem = readl(reset + MLX4_SEM_OFFSET); + if (!sem) + break; + + msleep(1); + } while (time_before(jiffies, end)); + + if (sem) { + mlx4_err(dev, "Failed to obtain HW semaphore, aborting\n"); + err = -EAGAIN; + iounmap(reset); + goto out; + } + + /* actually hit reset */ + writel(MLX4_RESET_VALUE, reset + MLX4_RESET_OFFSET); + iounmap(reset); + + /* Docs say to wait one second before accessing device */ + msleep(1000); + + end = jiffies + MLX4_RESET_TIMEOUT_JIFFIES; + do { + if (!pci_read_config_word(dev->persist->pdev, PCI_VENDOR_ID, + &vendor) && vendor != 0xffff) + break; + + msleep(1); + } while (time_before(jiffies, end)); + + if (vendor == 0xffff) { + err = -ENODEV; + mlx4_err(dev, "PCI device did not come back after reset, aborting\n"); + goto out; + } + + /* Now restore the PCI headers */ + if (pcie_cap) { + devctl = hca_header[(pcie_cap + PCI_EXP_DEVCTL) / 4]; + if (pcie_capability_write_word(dev->persist->pdev, + PCI_EXP_DEVCTL, + devctl)) { + err = -ENODEV; + mlx4_err(dev, "Couldn't restore HCA PCI Express Device Control register, aborting\n"); + goto out; + } + linkctl = hca_header[(pcie_cap + PCI_EXP_LNKCTL) / 4]; + if (pcie_capability_write_word(dev->persist->pdev, + PCI_EXP_LNKCTL, + linkctl)) { + err = -ENODEV; + mlx4_err(dev, "Couldn't restore HCA PCI Express Link control register, aborting\n"); + goto out; + } + } + + for (i = 0; i < 16; ++i) { + if (i * 4 == PCI_COMMAND) + continue; + + if (pci_write_config_dword(dev->persist->pdev, i * 4, + hca_header[i])) { + err = -ENODEV; + mlx4_err(dev, "Couldn't restore HCA reg %x, aborting\n", + i); + goto out; + } + } + + if (pci_write_config_dword(dev->persist->pdev, PCI_COMMAND, + hca_header[PCI_COMMAND / 4])) { + err = -ENODEV; + mlx4_err(dev, "Couldn't restore HCA COMMAND, aborting\n"); + goto out; + } + +out: + kfree(hca_header); + + return err; +} |