diff options
Diffstat (limited to 'kernel/drivers/net/ethernet/intel/ixgbe')
17 files changed, 3022 insertions, 911 deletions
diff --git a/kernel/drivers/net/ethernet/intel/ixgbe/ixgbe.h b/kernel/drivers/net/ethernet/intel/ixgbe/ixgbe.h index 636f9e350..1d2174526 100644 --- a/kernel/drivers/net/ethernet/intel/ixgbe/ixgbe.h +++ b/kernel/drivers/net/ethernet/intel/ixgbe/ixgbe.h @@ -152,9 +152,17 @@ struct vf_data_storage { u16 vlan_count; u8 spoofchk_enabled; bool rss_query_enabled; + u8 trusted; + int xcast_mode; unsigned int vf_api; }; +enum ixgbevf_xcast_modes { + IXGBEVF_XCAST_MODE_NONE = 0, + IXGBEVF_XCAST_MODE_MULTI, + IXGBEVF_XCAST_MODE_ALLMULTI, +}; + struct vf_macvlans { struct list_head l; int vf; @@ -539,8 +547,7 @@ struct hwmon_buff { #define IXGBE_MIN_RSC_ITR 24 #define IXGBE_100K_ITR 40 #define IXGBE_20K_ITR 200 -#define IXGBE_10K_ITR 400 -#define IXGBE_8K_ITR 500 +#define IXGBE_12K_ITR 336 /* ixgbe_test_staterr - tests bits in Rx descriptor status and error fields */ static inline __le32 ixgbe_test_staterr(union ixgbe_adv_rx_desc *rx_desc, @@ -595,6 +602,7 @@ struct ixgbe_mac_addr { /* default to trying for four seconds */ #define IXGBE_TRY_LINK_TIMEOUT (4 * HZ) +#define IXGBE_SFP_POLL_JIFFIES (2 * HZ) /* SFP poll every 2 seconds */ /* board specific private data structure */ struct ixgbe_adapter { @@ -630,6 +638,7 @@ struct ixgbe_adapter { #define IXGBE_FLAG_FCOE_ENABLED (u32)(1 << 21) #define IXGBE_FLAG_SRIOV_CAPABLE (u32)(1 << 22) #define IXGBE_FLAG_SRIOV_ENABLED (u32)(1 << 23) +#define IXGBE_FLAG_VXLAN_OFFLOAD_CAPABLE BIT(24) u32 flags2; #define IXGBE_FLAG2_RSC_CAPABLE (u32)(1 << 0) @@ -643,6 +652,10 @@ struct ixgbe_adapter { #define IXGBE_FLAG2_RSS_FIELD_IPV4_UDP (u32)(1 << 8) #define IXGBE_FLAG2_RSS_FIELD_IPV6_UDP (u32)(1 << 9) #define IXGBE_FLAG2_PTP_PPS_ENABLED (u32)(1 << 10) +#define IXGBE_FLAG2_PHY_INTERRUPT (u32)(1 << 11) +#ifdef CONFIG_IXGBE_VXLAN +#define IXGBE_FLAG2_VXLAN_REREG_NEEDED BIT(12) +#endif /* Tx fast path data */ int num_tx_queues; @@ -703,6 +716,7 @@ struct ixgbe_adapter { u32 link_speed; bool link_up; + unsigned long sfp_poll_time; unsigned long link_check_timeout; struct timer_list service_timer; @@ -756,7 +770,9 @@ struct ixgbe_adapter { u32 timer_event_accumulator; u32 vferr_refcount; struct ixgbe_mac_addr *mac_table; +#ifdef CONFIG_IXGBE_VXLAN u16 vxlan_port; +#endif struct kobject *info_kobj; #ifdef CONFIG_IXGBE_HWMON struct hwmon_buff *ixgbe_hwmon_buff; @@ -966,4 +982,5 @@ netdev_tx_t ixgbe_xmit_frame_ring(struct sk_buff *skb, struct ixgbe_adapter *adapter, struct ixgbe_ring *tx_ring); u32 ixgbe_rss_indir_tbl_entries(struct ixgbe_adapter *adapter); +void ixgbe_store_reta(struct ixgbe_adapter *adapter); #endif /* _IXGBE_H_ */ diff --git a/kernel/drivers/net/ethernet/intel/ixgbe/ixgbe_82598.c b/kernel/drivers/net/ethernet/intel/ixgbe/ixgbe_82598.c index 824a7ab79..65db69b86 100644 --- a/kernel/drivers/net/ethernet/intel/ixgbe/ixgbe_82598.c +++ b/kernel/drivers/net/ethernet/intel/ixgbe/ixgbe_82598.c @@ -1225,7 +1225,7 @@ static struct ixgbe_phy_operations phy_ops_82598 = { .setup_link_speed = &ixgbe_setup_phy_link_speed_generic, .read_i2c_sff8472 = &ixgbe_read_i2c_sff8472_82598, .read_i2c_eeprom = &ixgbe_read_i2c_eeprom_82598, - .check_overtemp = &ixgbe_tn_check_overtemp, + .check_overtemp = &ixgbe_tn_check_overtemp, }; struct ixgbe_info ixgbe_82598_info = { @@ -1234,4 +1234,5 @@ struct ixgbe_info ixgbe_82598_info = { .mac_ops = &mac_ops_82598, .eeprom_ops = &eeprom_ops_82598, .phy_ops = &phy_ops_82598, + .mvals = ixgbe_mvals_8259X, }; diff --git a/kernel/drivers/net/ethernet/intel/ixgbe/ixgbe_82599.c b/kernel/drivers/net/ethernet/intel/ixgbe/ixgbe_82599.c index e0c363948..a39afcf03 100644 --- a/kernel/drivers/net/ethernet/intel/ixgbe/ixgbe_82599.c +++ b/kernel/drivers/net/ethernet/intel/ixgbe/ixgbe_82599.c @@ -1,7 +1,7 @@ /******************************************************************************* Intel 10 Gigabit PCI Express Linux driver - Copyright(c) 1999 - 2014 Intel Corporation. + Copyright(c) 1999 - 2015 Intel Corporation. This program is free software; you can redistribute it and/or modify it under the terms and conditions of the GNU General Public License, @@ -44,9 +44,8 @@ static void ixgbe_disable_tx_laser_multispeed_fiber(struct ixgbe_hw *hw); static void ixgbe_enable_tx_laser_multispeed_fiber(struct ixgbe_hw *hw); static void ixgbe_flap_tx_laser_multispeed_fiber(struct ixgbe_hw *hw); -static s32 ixgbe_setup_mac_link_multispeed_fiber(struct ixgbe_hw *hw, - ixgbe_link_speed speed, - bool autoneg_wait_to_complete); +static void +ixgbe_set_hard_rate_select_speed(struct ixgbe_hw *, ixgbe_link_speed); static s32 ixgbe_setup_mac_link_smartspeed(struct ixgbe_hw *hw, ixgbe_link_speed speed, bool autoneg_wait_to_complete); @@ -71,7 +70,7 @@ bool ixgbe_mng_enabled(struct ixgbe_hw *hw) { u32 fwsm, manc, factps; - fwsm = IXGBE_READ_REG(hw, IXGBE_FWSM); + fwsm = IXGBE_READ_REG(hw, IXGBE_FWSM(hw)); if ((fwsm & IXGBE_FWSM_MODE_MASK) != IXGBE_FWSM_FW_MODE_PT) return false; @@ -79,7 +78,7 @@ bool ixgbe_mng_enabled(struct ixgbe_hw *hw) if (!(manc & IXGBE_MANC_RCV_TCO_EN)) return false; - factps = IXGBE_READ_REG(hw, IXGBE_FACTPS); + factps = IXGBE_READ_REG(hw, IXGBE_FACTPS(hw)); if (factps & IXGBE_FACTPS_MNGCG) return false; @@ -109,6 +108,9 @@ static void ixgbe_init_mac_link_ops_82599(struct ixgbe_hw *hw) if (hw->phy.multispeed_fiber) { /* Set up dual speed SFP+ support */ mac->ops.setup_link = &ixgbe_setup_mac_link_multispeed_fiber; + mac->ops.setup_mac_link = ixgbe_setup_mac_link_82599; + mac->ops.set_rate_select_speed = + ixgbe_set_hard_rate_select_speed; } else { if ((mac->ops.get_media_type(hw) == ixgbe_media_type_backplane) && @@ -504,16 +506,12 @@ static enum ixgbe_media_type ixgbe_get_media_type_82599(struct ixgbe_hw *hw) **/ static void ixgbe_stop_mac_link_on_d3_82599(struct ixgbe_hw *hw) { - u32 autoc2_reg, fwsm; + u32 autoc2_reg; u16 ee_ctrl_2 = 0; hw->eeprom.ops.read(hw, IXGBE_EEPROM_CTRL_2, &ee_ctrl_2); - /* Check to see if MNG FW could be enabled */ - fwsm = IXGBE_READ_REG(hw, IXGBE_FWSM); - - if (((fwsm & IXGBE_FWSM_MODE_MASK) != IXGBE_FWSM_FW_MODE_PT) && - !hw->wol_enabled && + if (!ixgbe_mng_present(hw) && !hw->wol_enabled && ee_ctrl_2 & IXGBE_EEPROM_CCD_BIT) { autoc2_reg = IXGBE_READ_REG(hw, IXGBE_AUTOC2); autoc2_reg |= IXGBE_AUTOC2_LINK_DISABLE_ON_D3_MASK; @@ -650,176 +648,32 @@ static void ixgbe_flap_tx_laser_multispeed_fiber(struct ixgbe_hw *hw) } /** - * ixgbe_setup_mac_link_multispeed_fiber - Set MAC link speed - * @hw: pointer to hardware structure - * @speed: new link speed - * @autoneg_wait_to_complete: true when waiting for completion is needed + * ixgbe_set_hard_rate_select_speed - Set module link speed + * @hw: pointer to hardware structure + * @speed: link speed to set * - * Set the link speed in the AUTOC register and restarts link. - **/ -static s32 ixgbe_setup_mac_link_multispeed_fiber(struct ixgbe_hw *hw, - ixgbe_link_speed speed, - bool autoneg_wait_to_complete) + * Set module link speed via RS0/RS1 rate select pins. + */ +static void +ixgbe_set_hard_rate_select_speed(struct ixgbe_hw *hw, ixgbe_link_speed speed) { - s32 status = 0; - ixgbe_link_speed link_speed = IXGBE_LINK_SPEED_UNKNOWN; - ixgbe_link_speed highest_link_speed = IXGBE_LINK_SPEED_UNKNOWN; - u32 speedcnt = 0; u32 esdp_reg = IXGBE_READ_REG(hw, IXGBE_ESDP); - u32 i = 0; - bool link_up = false; - bool autoneg = false; - - /* Mask off requested but non-supported speeds */ - status = hw->mac.ops.get_link_capabilities(hw, &link_speed, - &autoneg); - if (status != 0) - return status; - - speed &= link_speed; - - /* - * Try each speed one by one, highest priority first. We do this in - * software because 10gb fiber doesn't support speed autonegotiation. - */ - if (speed & IXGBE_LINK_SPEED_10GB_FULL) { - speedcnt++; - highest_link_speed = IXGBE_LINK_SPEED_10GB_FULL; - - /* If we already have link at this speed, just jump out */ - status = hw->mac.ops.check_link(hw, &link_speed, &link_up, - false); - if (status != 0) - return status; - - if ((link_speed == IXGBE_LINK_SPEED_10GB_FULL) && link_up) - goto out; - - /* Set the module link speed */ - switch (hw->phy.media_type) { - case ixgbe_media_type_fiber: - esdp_reg |= (IXGBE_ESDP_SDP5_DIR | IXGBE_ESDP_SDP5); - IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp_reg); - IXGBE_WRITE_FLUSH(hw); - break; - case ixgbe_media_type_fiber_qsfp: - /* QSFP module automatically detects MAC link speed */ - break; - default: - hw_dbg(hw, "Unexpected media type.\n"); - break; - } - - /* Allow module to change analog characteristics (1G->10G) */ - msleep(40); - - status = ixgbe_setup_mac_link_82599(hw, - IXGBE_LINK_SPEED_10GB_FULL, - autoneg_wait_to_complete); - if (status != 0) - return status; - - /* Flap the tx laser if it has not already been done */ - if (hw->mac.ops.flap_tx_laser) - hw->mac.ops.flap_tx_laser(hw); - - /* - * Wait for the controller to acquire link. Per IEEE 802.3ap, - * Section 73.10.2, we may have to wait up to 500ms if KR is - * attempted. 82599 uses the same timing for 10g SFI. - */ - for (i = 0; i < 5; i++) { - /* Wait for the link partner to also set speed */ - msleep(100); - - /* If we have link, just jump out */ - status = hw->mac.ops.check_link(hw, &link_speed, - &link_up, false); - if (status != 0) - return status; - - if (link_up) - goto out; - } - } - - if (speed & IXGBE_LINK_SPEED_1GB_FULL) { - speedcnt++; - if (highest_link_speed == IXGBE_LINK_SPEED_UNKNOWN) - highest_link_speed = IXGBE_LINK_SPEED_1GB_FULL; - - /* If we already have link at this speed, just jump out */ - status = hw->mac.ops.check_link(hw, &link_speed, &link_up, - false); - if (status != 0) - return status; - - if ((link_speed == IXGBE_LINK_SPEED_1GB_FULL) && link_up) - goto out; - - /* Set the module link speed */ - switch (hw->phy.media_type) { - case ixgbe_media_type_fiber: - esdp_reg &= ~IXGBE_ESDP_SDP5; - esdp_reg |= IXGBE_ESDP_SDP5_DIR; - IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp_reg); - IXGBE_WRITE_FLUSH(hw); - break; - case ixgbe_media_type_fiber_qsfp: - /* QSFP module automatically detects MAC link speed */ - break; - default: - hw_dbg(hw, "Unexpected media type.\n"); - break; - } - - /* Allow module to change analog characteristics (10G->1G) */ - msleep(40); - - status = ixgbe_setup_mac_link_82599(hw, - IXGBE_LINK_SPEED_1GB_FULL, - autoneg_wait_to_complete); - if (status != 0) - return status; - /* Flap the tx laser if it has not already been done */ - if (hw->mac.ops.flap_tx_laser) - hw->mac.ops.flap_tx_laser(hw); - - /* Wait for the link partner to also set speed */ - msleep(100); - - /* If we have link, just jump out */ - status = hw->mac.ops.check_link(hw, &link_speed, &link_up, - false); - if (status != 0) - return status; - - if (link_up) - goto out; + switch (speed) { + case IXGBE_LINK_SPEED_10GB_FULL: + esdp_reg |= (IXGBE_ESDP_SDP5_DIR | IXGBE_ESDP_SDP5); + break; + case IXGBE_LINK_SPEED_1GB_FULL: + esdp_reg &= ~IXGBE_ESDP_SDP5; + esdp_reg |= IXGBE_ESDP_SDP5_DIR; + break; + default: + hw_dbg(hw, "Invalid fixed module speed\n"); + return; } - /* - * We didn't get link. Configure back to the highest speed we tried, - * (if there was more than one). We call ourselves back with just the - * single highest speed that the user requested. - */ - if (speedcnt > 1) - status = ixgbe_setup_mac_link_multispeed_fiber(hw, - highest_link_speed, - autoneg_wait_to_complete); - -out: - /* Set autoneg_advertised value based on input link speed */ - hw->phy.autoneg_advertised = 0; - - if (speed & IXGBE_LINK_SPEED_10GB_FULL) - hw->phy.autoneg_advertised |= IXGBE_LINK_SPEED_10GB_FULL; - - if (speed & IXGBE_LINK_SPEED_1GB_FULL) - hw->phy.autoneg_advertised |= IXGBE_LINK_SPEED_1GB_FULL; - - return status; + IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp_reg); + IXGBE_WRITE_FLUSH(hw); } /** @@ -1246,6 +1100,25 @@ mac_reset_top: } /** + * ixgbe_fdir_check_cmd_complete - poll to check whether FDIRCMD is complete + * @hw: pointer to hardware structure + * @fdircmd: current value of FDIRCMD register + */ +static s32 ixgbe_fdir_check_cmd_complete(struct ixgbe_hw *hw, u32 *fdircmd) +{ + int i; + + for (i = 0; i < IXGBE_FDIRCMD_CMD_POLL; i++) { + *fdircmd = IXGBE_READ_REG(hw, IXGBE_FDIRCMD); + if (!(*fdircmd & IXGBE_FDIRCMD_CMD_MASK)) + return 0; + udelay(10); + } + + return IXGBE_ERR_FDIR_CMD_INCOMPLETE; +} + +/** * ixgbe_reinit_fdir_tables_82599 - Reinitialize Flow Director tables. * @hw: pointer to hardware structure **/ @@ -1253,6 +1126,8 @@ s32 ixgbe_reinit_fdir_tables_82599(struct ixgbe_hw *hw) { int i; u32 fdirctrl = IXGBE_READ_REG(hw, IXGBE_FDIRCTRL); + u32 fdircmd; + s32 err; fdirctrl &= ~IXGBE_FDIRCTRL_INIT_DONE; @@ -1260,15 +1135,10 @@ s32 ixgbe_reinit_fdir_tables_82599(struct ixgbe_hw *hw) * Before starting reinitialization process, * FDIRCMD.CMD must be zero. */ - for (i = 0; i < IXGBE_FDIRCMD_CMD_POLL; i++) { - if (!(IXGBE_READ_REG(hw, IXGBE_FDIRCMD) & - IXGBE_FDIRCMD_CMD_MASK)) - break; - udelay(10); - } - if (i >= IXGBE_FDIRCMD_CMD_POLL) { - hw_dbg(hw, "Flow Director previous command isn't complete, aborting table re-initialization.\n"); - return IXGBE_ERR_FDIR_REINIT_FAILED; + err = ixgbe_fdir_check_cmd_complete(hw, &fdircmd); + if (err) { + hw_dbg(hw, "Flow Director previous command did not complete, aborting table re-initialization.\n"); + return err; } IXGBE_WRITE_REG(hw, IXGBE_FDIRFREE, 0); @@ -1394,14 +1264,12 @@ s32 ixgbe_init_fdir_perfect_82599(struct ixgbe_hw *hw, u32 fdirctrl) /* * Continue setup of fdirctrl register bits: * Turn perfect match filtering on - * Report hash in RSS field of Rx wb descriptor * Initialize the drop queue * Move the flexible bytes to use the ethertype - shift 6 words * Set the maximum length per hash bucket to 0xA filters * Send interrupt when 64 (0x4 * 16) filters are left */ fdirctrl |= IXGBE_FDIRCTRL_PERFECT_MATCH | - IXGBE_FDIRCTRL_REPORT_STATUS | (IXGBE_FDIR_DROP_QUEUE << IXGBE_FDIRCTRL_DROP_Q_SHIFT) | (0x6 << IXGBE_FDIRCTRL_FLEX_SHIFT) | (0xA << IXGBE_FDIRCTRL_MAX_LENGTH_SHIFT) | @@ -1509,20 +1377,28 @@ static u32 ixgbe_atr_compute_sig_hash_82599(union ixgbe_atr_hash_dword input, * @input: unique input dword * @common: compressed common input dword * @queue: queue index to direct traffic to + * + * Note that the tunnel bit in input must not be set when the hardware + * tunneling support does not exist. **/ s32 ixgbe_fdir_add_signature_filter_82599(struct ixgbe_hw *hw, union ixgbe_atr_hash_dword input, union ixgbe_atr_hash_dword common, u8 queue) { - u64 fdirhashcmd; - u32 fdircmd; + u64 fdirhashcmd; + u8 flow_type; + bool tunnel; + u32 fdircmd; /* * Get the flow_type in order to program FDIRCMD properly * lowest 2 bits are FDIRCMD.L4TYPE, third lowest bit is FDIRCMD.IPV6 */ - switch (input.formatted.flow_type) { + tunnel = !!(input.formatted.flow_type & IXGBE_ATR_L4TYPE_TUNNEL_MASK); + flow_type = input.formatted.flow_type & + (IXGBE_ATR_L4TYPE_TUNNEL_MASK - 1); + switch (flow_type) { case IXGBE_ATR_FLOW_TYPE_TCPV4: case IXGBE_ATR_FLOW_TYPE_UDPV4: case IXGBE_ATR_FLOW_TYPE_SCTPV4: @@ -1538,8 +1414,10 @@ s32 ixgbe_fdir_add_signature_filter_82599(struct ixgbe_hw *hw, /* configure FDIRCMD register */ fdircmd = IXGBE_FDIRCMD_CMD_ADD_FLOW | IXGBE_FDIRCMD_FILTER_UPDATE | IXGBE_FDIRCMD_LAST | IXGBE_FDIRCMD_QUEUE_EN; - fdircmd |= input.formatted.flow_type << IXGBE_FDIRCMD_FLOW_TYPE_SHIFT; + fdircmd |= (u32)flow_type << IXGBE_FDIRCMD_FLOW_TYPE_SHIFT; fdircmd |= (u32)queue << IXGBE_FDIRCMD_RX_QUEUE_SHIFT; + if (tunnel) + fdircmd |= IXGBE_FDIRCMD_TUNNEL_FILTER; /* * The lower 32-bits of fdirhashcmd is for FDIRHASH, the upper 32-bits @@ -1746,6 +1624,16 @@ s32 ixgbe_fdir_set_input_mask_82599(struct ixgbe_hw *hw, IXGBE_WRITE_REG(hw, IXGBE_FDIRTCPM, ~fdirtcpm); IXGBE_WRITE_REG(hw, IXGBE_FDIRUDPM, ~fdirtcpm); + /* also use it for SCTP */ + switch (hw->mac.type) { + case ixgbe_mac_X550: + case ixgbe_mac_X550EM_x: + IXGBE_WRITE_REG(hw, IXGBE_FDIRSCTPM, ~fdirtcpm); + break; + default: + break; + } + /* store source and destination IP masks (big-enian) */ IXGBE_WRITE_REG_BE32(hw, IXGBE_FDIRSIP4M, ~input_mask->formatted.src_ip[0]); @@ -1760,6 +1648,7 @@ s32 ixgbe_fdir_write_perfect_filter_82599(struct ixgbe_hw *hw, u16 soft_id, u8 queue) { u32 fdirport, fdirvlan, fdirhash, fdircmd; + s32 err; /* currently IPv6 is not supported, must be programmed with 0 */ IXGBE_WRITE_REG_BE32(hw, IXGBE_FDIRSIPv6(0), @@ -1808,6 +1697,11 @@ s32 ixgbe_fdir_write_perfect_filter_82599(struct ixgbe_hw *hw, fdircmd |= (u32)input->formatted.vm_pool << IXGBE_FDIRCMD_VT_POOL_SHIFT; IXGBE_WRITE_REG(hw, IXGBE_FDIRCMD, fdircmd); + err = ixgbe_fdir_check_cmd_complete(hw, &fdircmd); + if (err) { + hw_dbg(hw, "Flow Director command did not complete!\n"); + return err; + } return 0; } @@ -1817,9 +1711,8 @@ s32 ixgbe_fdir_erase_perfect_filter_82599(struct ixgbe_hw *hw, u16 soft_id) { u32 fdirhash; - u32 fdircmd = 0; - u32 retry_count; - s32 err = 0; + u32 fdircmd; + s32 err; /* configure FDIRHASH register */ fdirhash = input->formatted.bkt_hash; @@ -1832,18 +1725,12 @@ s32 ixgbe_fdir_erase_perfect_filter_82599(struct ixgbe_hw *hw, /* Query if filter is present */ IXGBE_WRITE_REG(hw, IXGBE_FDIRCMD, IXGBE_FDIRCMD_CMD_QUERY_REM_FILT); - for (retry_count = 10; retry_count; retry_count--) { - /* allow 10us for query to process */ - udelay(10); - /* verify query completed successfully */ - fdircmd = IXGBE_READ_REG(hw, IXGBE_FDIRCMD); - if (!(fdircmd & IXGBE_FDIRCMD_CMD_MASK)) - break; + err = ixgbe_fdir_check_cmd_complete(hw, &fdircmd); + if (err) { + hw_dbg(hw, "Flow Director command did not complete!\n"); + return err; } - if (!retry_count) - err = IXGBE_ERR_FDIR_REINIT_FAILED; - /* if filter exists in hardware then remove it */ if (fdircmd & IXGBE_FDIRCMD_FILTER_VALID) { IXGBE_WRITE_REG(hw, IXGBE_FDIRHASH, fdirhash); @@ -1852,7 +1739,7 @@ s32 ixgbe_fdir_erase_perfect_filter_82599(struct ixgbe_hw *hw, IXGBE_FDIRCMD_CMD_REMOVE_FLOW); } - return err; + return 0; } /** @@ -2378,4 +2265,5 @@ struct ixgbe_info ixgbe_82599_info = { .eeprom_ops = &eeprom_ops_82599, .phy_ops = &phy_ops_82599, .mbx_ops = &mbx_ops_generic, + .mvals = ixgbe_mvals_8259X, }; diff --git a/kernel/drivers/net/ethernet/intel/ixgbe/ixgbe_common.c b/kernel/drivers/net/ethernet/intel/ixgbe/ixgbe_common.c index 06d8f3cfa..ce61b36b9 100644 --- a/kernel/drivers/net/ethernet/intel/ixgbe/ixgbe_common.c +++ b/kernel/drivers/net/ethernet/intel/ixgbe/ixgbe_common.c @@ -57,6 +57,11 @@ static s32 ixgbe_detect_eeprom_page_size_generic(struct ixgbe_hw *hw, u16 offset); static s32 ixgbe_disable_pcie_master(struct ixgbe_hw *hw); +/* Base table for registers values that change by MAC */ +const u32 ixgbe_mvals_8259X[IXGBE_MVALS_IDX_LIMIT] = { + IXGBE_MVALS_INIT(8259X) +}; + /** * ixgbe_device_supports_autoneg_fc - Check if phy supports autoneg flow * control @@ -91,6 +96,8 @@ bool ixgbe_device_supports_autoneg_fc(struct ixgbe_hw *hw) case IXGBE_DEV_ID_82599_T3_LOM: case IXGBE_DEV_ID_X540T: case IXGBE_DEV_ID_X540T1: + case IXGBE_DEV_ID_X550T: + case IXGBE_DEV_ID_X550EM_X_10G_T: supported = true; break; default: @@ -290,13 +297,13 @@ s32 ixgbe_start_hw_generic(struct ixgbe_hw *hw) /* Setup flow control */ ret_val = ixgbe_setup_fc(hw); - if (!ret_val) - return 0; + if (ret_val) + return ret_val; /* Clear adapter stopped flag */ hw->adapter_stopped = false; - return ret_val; + return 0; } /** @@ -463,7 +470,7 @@ s32 ixgbe_clear_hw_cntrs_generic(struct ixgbe_hw *hw) } } - if (hw->mac.type == ixgbe_mac_X540) { + if (hw->mac.type == ixgbe_mac_X550 || hw->mac.type == ixgbe_mac_X540) { if (hw->phy.id == 0) hw->phy.ops.identify(hw); hw->phy.ops.read_reg(hw, IXGBE_PCRC8ECL, MDIO_MMD_PCS, &i); @@ -681,7 +688,7 @@ void ixgbe_set_lan_id_multi_port_pcie(struct ixgbe_hw *hw) bus->lan_id = bus->func; /* check for a port swap */ - reg = IXGBE_READ_REG(hw, IXGBE_FACTPS); + reg = IXGBE_READ_REG(hw, IXGBE_FACTPS(hw)); if (reg & IXGBE_FACTPS_LFS) bus->func ^= 0x1; } @@ -799,7 +806,7 @@ s32 ixgbe_init_eeprom_params_generic(struct ixgbe_hw *hw) * Check for EEPROM present first. * If not present leave as none */ - eec = IXGBE_READ_REG(hw, IXGBE_EEC); + eec = IXGBE_READ_REG(hw, IXGBE_EEC(hw)); if (eec & IXGBE_EEC_PRES) { eeprom->type = ixgbe_eeprom_spi; @@ -1283,14 +1290,14 @@ static s32 ixgbe_acquire_eeprom(struct ixgbe_hw *hw) if (hw->mac.ops.acquire_swfw_sync(hw, IXGBE_GSSR_EEP_SM) != 0) return IXGBE_ERR_SWFW_SYNC; - eec = IXGBE_READ_REG(hw, IXGBE_EEC); + eec = IXGBE_READ_REG(hw, IXGBE_EEC(hw)); /* Request EEPROM Access */ eec |= IXGBE_EEC_REQ; - IXGBE_WRITE_REG(hw, IXGBE_EEC, eec); + IXGBE_WRITE_REG(hw, IXGBE_EEC(hw), eec); for (i = 0; i < IXGBE_EEPROM_GRANT_ATTEMPTS; i++) { - eec = IXGBE_READ_REG(hw, IXGBE_EEC); + eec = IXGBE_READ_REG(hw, IXGBE_EEC(hw)); if (eec & IXGBE_EEC_GNT) break; udelay(5); @@ -1299,7 +1306,7 @@ static s32 ixgbe_acquire_eeprom(struct ixgbe_hw *hw) /* Release if grant not acquired */ if (!(eec & IXGBE_EEC_GNT)) { eec &= ~IXGBE_EEC_REQ; - IXGBE_WRITE_REG(hw, IXGBE_EEC, eec); + IXGBE_WRITE_REG(hw, IXGBE_EEC(hw), eec); hw_dbg(hw, "Could not acquire EEPROM grant\n"); hw->mac.ops.release_swfw_sync(hw, IXGBE_GSSR_EEP_SM); @@ -1309,7 +1316,7 @@ static s32 ixgbe_acquire_eeprom(struct ixgbe_hw *hw) /* Setup EEPROM for Read/Write */ /* Clear CS and SK */ eec &= ~(IXGBE_EEC_CS | IXGBE_EEC_SK); - IXGBE_WRITE_REG(hw, IXGBE_EEC, eec); + IXGBE_WRITE_REG(hw, IXGBE_EEC(hw), eec); IXGBE_WRITE_FLUSH(hw); udelay(1); return 0; @@ -1333,7 +1340,7 @@ static s32 ixgbe_get_eeprom_semaphore(struct ixgbe_hw *hw) * If the SMBI bit is 0 when we read it, then the bit will be * set and we have the semaphore */ - swsm = IXGBE_READ_REG(hw, IXGBE_SWSM); + swsm = IXGBE_READ_REG(hw, IXGBE_SWSM(hw)); if (!(swsm & IXGBE_SWSM_SMBI)) break; usleep_range(50, 100); @@ -1353,7 +1360,7 @@ static s32 ixgbe_get_eeprom_semaphore(struct ixgbe_hw *hw) * If the SMBI bit is 0 when we read it, then the bit will be * set and we have the semaphore */ - swsm = IXGBE_READ_REG(hw, IXGBE_SWSM); + swsm = IXGBE_READ_REG(hw, IXGBE_SWSM(hw)); if (swsm & IXGBE_SWSM_SMBI) { hw_dbg(hw, "Software semaphore SMBI between device drivers not granted.\n"); return IXGBE_ERR_EEPROM; @@ -1362,16 +1369,16 @@ static s32 ixgbe_get_eeprom_semaphore(struct ixgbe_hw *hw) /* Now get the semaphore between SW/FW through the SWESMBI bit */ for (i = 0; i < timeout; i++) { - swsm = IXGBE_READ_REG(hw, IXGBE_SWSM); + swsm = IXGBE_READ_REG(hw, IXGBE_SWSM(hw)); /* Set the SW EEPROM semaphore bit to request access */ swsm |= IXGBE_SWSM_SWESMBI; - IXGBE_WRITE_REG(hw, IXGBE_SWSM, swsm); + IXGBE_WRITE_REG(hw, IXGBE_SWSM(hw), swsm); /* If we set the bit successfully then we got the * semaphore. */ - swsm = IXGBE_READ_REG(hw, IXGBE_SWSM); + swsm = IXGBE_READ_REG(hw, IXGBE_SWSM(hw)); if (swsm & IXGBE_SWSM_SWESMBI) break; @@ -1400,11 +1407,11 @@ static void ixgbe_release_eeprom_semaphore(struct ixgbe_hw *hw) { u32 swsm; - swsm = IXGBE_READ_REG(hw, IXGBE_SWSM); + swsm = IXGBE_READ_REG(hw, IXGBE_SWSM(hw)); /* Release both semaphores by writing 0 to the bits SWESMBI and SMBI */ swsm &= ~(IXGBE_SWSM_SWESMBI | IXGBE_SWSM_SMBI); - IXGBE_WRITE_REG(hw, IXGBE_SWSM, swsm); + IXGBE_WRITE_REG(hw, IXGBE_SWSM(hw), swsm); IXGBE_WRITE_FLUSH(hw); } @@ -1454,15 +1461,15 @@ static void ixgbe_standby_eeprom(struct ixgbe_hw *hw) { u32 eec; - eec = IXGBE_READ_REG(hw, IXGBE_EEC); + eec = IXGBE_READ_REG(hw, IXGBE_EEC(hw)); /* Toggle CS to flush commands */ eec |= IXGBE_EEC_CS; - IXGBE_WRITE_REG(hw, IXGBE_EEC, eec); + IXGBE_WRITE_REG(hw, IXGBE_EEC(hw), eec); IXGBE_WRITE_FLUSH(hw); udelay(1); eec &= ~IXGBE_EEC_CS; - IXGBE_WRITE_REG(hw, IXGBE_EEC, eec); + IXGBE_WRITE_REG(hw, IXGBE_EEC(hw), eec); IXGBE_WRITE_FLUSH(hw); udelay(1); } @@ -1480,7 +1487,7 @@ static void ixgbe_shift_out_eeprom_bits(struct ixgbe_hw *hw, u16 data, u32 mask; u32 i; - eec = IXGBE_READ_REG(hw, IXGBE_EEC); + eec = IXGBE_READ_REG(hw, IXGBE_EEC(hw)); /* * Mask is used to shift "count" bits of "data" out to the EEPROM @@ -1501,7 +1508,7 @@ static void ixgbe_shift_out_eeprom_bits(struct ixgbe_hw *hw, u16 data, else eec &= ~IXGBE_EEC_DI; - IXGBE_WRITE_REG(hw, IXGBE_EEC, eec); + IXGBE_WRITE_REG(hw, IXGBE_EEC(hw), eec); IXGBE_WRITE_FLUSH(hw); udelay(1); @@ -1518,7 +1525,7 @@ static void ixgbe_shift_out_eeprom_bits(struct ixgbe_hw *hw, u16 data, /* We leave the "DI" bit set to "0" when we leave this routine. */ eec &= ~IXGBE_EEC_DI; - IXGBE_WRITE_REG(hw, IXGBE_EEC, eec); + IXGBE_WRITE_REG(hw, IXGBE_EEC(hw), eec); IXGBE_WRITE_FLUSH(hw); } @@ -1539,7 +1546,7 @@ static u16 ixgbe_shift_in_eeprom_bits(struct ixgbe_hw *hw, u16 count) * the value of the "DO" bit. During this "shifting in" process the * "DI" bit should always be clear. */ - eec = IXGBE_READ_REG(hw, IXGBE_EEC); + eec = IXGBE_READ_REG(hw, IXGBE_EEC(hw)); eec &= ~(IXGBE_EEC_DO | IXGBE_EEC_DI); @@ -1547,7 +1554,7 @@ static u16 ixgbe_shift_in_eeprom_bits(struct ixgbe_hw *hw, u16 count) data = data << 1; ixgbe_raise_eeprom_clk(hw, &eec); - eec = IXGBE_READ_REG(hw, IXGBE_EEC); + eec = IXGBE_READ_REG(hw, IXGBE_EEC(hw)); eec &= ~(IXGBE_EEC_DI); if (eec & IXGBE_EEC_DO) @@ -1571,7 +1578,7 @@ static void ixgbe_raise_eeprom_clk(struct ixgbe_hw *hw, u32 *eec) * (setting the SK bit), then delay */ *eec = *eec | IXGBE_EEC_SK; - IXGBE_WRITE_REG(hw, IXGBE_EEC, *eec); + IXGBE_WRITE_REG(hw, IXGBE_EEC(hw), *eec); IXGBE_WRITE_FLUSH(hw); udelay(1); } @@ -1588,7 +1595,7 @@ static void ixgbe_lower_eeprom_clk(struct ixgbe_hw *hw, u32 *eec) * delay */ *eec = *eec & ~IXGBE_EEC_SK; - IXGBE_WRITE_REG(hw, IXGBE_EEC, *eec); + IXGBE_WRITE_REG(hw, IXGBE_EEC(hw), *eec); IXGBE_WRITE_FLUSH(hw); udelay(1); } @@ -1601,19 +1608,19 @@ static void ixgbe_release_eeprom(struct ixgbe_hw *hw) { u32 eec; - eec = IXGBE_READ_REG(hw, IXGBE_EEC); + eec = IXGBE_READ_REG(hw, IXGBE_EEC(hw)); eec |= IXGBE_EEC_CS; /* Pull CS high */ eec &= ~IXGBE_EEC_SK; /* Lower SCK */ - IXGBE_WRITE_REG(hw, IXGBE_EEC, eec); + IXGBE_WRITE_REG(hw, IXGBE_EEC(hw), eec); IXGBE_WRITE_FLUSH(hw); udelay(1); /* Stop requesting EEPROM access */ eec &= ~IXGBE_EEC_REQ; - IXGBE_WRITE_REG(hw, IXGBE_EEC, eec); + IXGBE_WRITE_REG(hw, IXGBE_EEC(hw), eec); hw->mac.ops.release_swfw_sync(hw, IXGBE_GSSR_EEP_SM); @@ -2157,10 +2164,11 @@ s32 ixgbe_fc_enable_generic(struct ixgbe_hw *hw) /* * In order to prevent Tx hangs when the internal Tx * switch is enabled we must set the high water mark - * to the maximum FCRTH value. This allows the Tx - * switch to function even under heavy Rx workloads. + * to the Rx packet buffer size - 24KB. This allows + * the Tx switch to function even under heavy Rx + * workloads. */ - fcrth = IXGBE_READ_REG(hw, IXGBE_RXPBSIZE(i)) - 32; + fcrth = IXGBE_READ_REG(hw, IXGBE_RXPBSIZE(i)) - 24576; } IXGBE_WRITE_REG(hw, IXGBE_FCRTH_82599(i), fcrth); @@ -2469,6 +2477,9 @@ static s32 ixgbe_disable_pcie_master(struct ixgbe_hw *hw) hw_dbg(hw, "GIO Master Disable bit didn't clear - requesting resets\n"); hw->mac.flags |= IXGBE_FLAGS_DOUBLE_RESET_REQUIRED; + if (hw->mac.type >= ixgbe_mac_X550) + return 0; + /* * Before proceeding, make sure that the PCIe block does not have * transactions pending. @@ -3898,3 +3909,228 @@ void ixgbe_enable_rx_generic(struct ixgbe_hw *hw) } } } + +/** ixgbe_mng_present - returns true when management capability is present + * @hw: pointer to hardware structure + **/ +bool ixgbe_mng_present(struct ixgbe_hw *hw) +{ + u32 fwsm; + + if (hw->mac.type < ixgbe_mac_82599EB) + return false; + + fwsm = IXGBE_READ_REG(hw, IXGBE_FWSM(hw)); + fwsm &= IXGBE_FWSM_MODE_MASK; + return fwsm == IXGBE_FWSM_FW_MODE_PT; +} + +/** + * ixgbe_setup_mac_link_multispeed_fiber - Set MAC link speed + * @hw: pointer to hardware structure + * @speed: new link speed + * @autoneg_wait_to_complete: true when waiting for completion is needed + * + * Set the link speed in the MAC and/or PHY register and restarts link. + */ +s32 ixgbe_setup_mac_link_multispeed_fiber(struct ixgbe_hw *hw, + ixgbe_link_speed speed, + bool autoneg_wait_to_complete) +{ + ixgbe_link_speed link_speed = IXGBE_LINK_SPEED_UNKNOWN; + ixgbe_link_speed highest_link_speed = IXGBE_LINK_SPEED_UNKNOWN; + s32 status = 0; + u32 speedcnt = 0; + u32 i = 0; + bool autoneg, link_up = false; + + /* Mask off requested but non-supported speeds */ + status = hw->mac.ops.get_link_capabilities(hw, &link_speed, &autoneg); + if (status) + return status; + + speed &= link_speed; + + /* Try each speed one by one, highest priority first. We do this in + * software because 10Gb fiber doesn't support speed autonegotiation. + */ + if (speed & IXGBE_LINK_SPEED_10GB_FULL) { + speedcnt++; + highest_link_speed = IXGBE_LINK_SPEED_10GB_FULL; + + /* If we already have link at this speed, just jump out */ + status = hw->mac.ops.check_link(hw, &link_speed, &link_up, + false); + if (status) + return status; + + if (link_speed == IXGBE_LINK_SPEED_10GB_FULL && link_up) + goto out; + + /* Set the module link speed */ + switch (hw->phy.media_type) { + case ixgbe_media_type_fiber: + hw->mac.ops.set_rate_select_speed(hw, + IXGBE_LINK_SPEED_10GB_FULL); + break; + case ixgbe_media_type_fiber_qsfp: + /* QSFP module automatically detects MAC link speed */ + break; + default: + hw_dbg(hw, "Unexpected media type\n"); + break; + } + + /* Allow module to change analog characteristics (1G->10G) */ + msleep(40); + + status = hw->mac.ops.setup_mac_link(hw, + IXGBE_LINK_SPEED_10GB_FULL, + autoneg_wait_to_complete); + if (status) + return status; + + /* Flap the Tx laser if it has not already been done */ + if (hw->mac.ops.flap_tx_laser) + hw->mac.ops.flap_tx_laser(hw); + + /* Wait for the controller to acquire link. Per IEEE 802.3ap, + * Section 73.10.2, we may have to wait up to 500ms if KR is + * attempted. 82599 uses the same timing for 10g SFI. + */ + for (i = 0; i < 5; i++) { + /* Wait for the link partner to also set speed */ + msleep(100); + + /* If we have link, just jump out */ + status = hw->mac.ops.check_link(hw, &link_speed, + &link_up, false); + if (status) + return status; + + if (link_up) + goto out; + } + } + + if (speed & IXGBE_LINK_SPEED_1GB_FULL) { + speedcnt++; + if (highest_link_speed == IXGBE_LINK_SPEED_UNKNOWN) + highest_link_speed = IXGBE_LINK_SPEED_1GB_FULL; + + /* If we already have link at this speed, just jump out */ + status = hw->mac.ops.check_link(hw, &link_speed, &link_up, + false); + if (status) + return status; + + if (link_speed == IXGBE_LINK_SPEED_1GB_FULL && link_up) + goto out; + + /* Set the module link speed */ + switch (hw->phy.media_type) { + case ixgbe_media_type_fiber: + hw->mac.ops.set_rate_select_speed(hw, + IXGBE_LINK_SPEED_1GB_FULL); + break; + case ixgbe_media_type_fiber_qsfp: + /* QSFP module automatically detects link speed */ + break; + default: + hw_dbg(hw, "Unexpected media type\n"); + break; + } + + /* Allow module to change analog characteristics (10G->1G) */ + msleep(40); + + status = hw->mac.ops.setup_mac_link(hw, + IXGBE_LINK_SPEED_1GB_FULL, + autoneg_wait_to_complete); + if (status) + return status; + + /* Flap the Tx laser if it has not already been done */ + if (hw->mac.ops.flap_tx_laser) + hw->mac.ops.flap_tx_laser(hw); + + /* Wait for the link partner to also set speed */ + msleep(100); + + /* If we have link, just jump out */ + status = hw->mac.ops.check_link(hw, &link_speed, &link_up, + false); + if (status) + return status; + + if (link_up) + goto out; + } + + /* We didn't get link. Configure back to the highest speed we tried, + * (if there was more than one). We call ourselves back with just the + * single highest speed that the user requested. + */ + if (speedcnt > 1) + status = ixgbe_setup_mac_link_multispeed_fiber(hw, + highest_link_speed, + autoneg_wait_to_complete); + +out: + /* Set autoneg_advertised value based on input link speed */ + hw->phy.autoneg_advertised = 0; + + if (speed & IXGBE_LINK_SPEED_10GB_FULL) + hw->phy.autoneg_advertised |= IXGBE_LINK_SPEED_10GB_FULL; + + if (speed & IXGBE_LINK_SPEED_1GB_FULL) + hw->phy.autoneg_advertised |= IXGBE_LINK_SPEED_1GB_FULL; + + return status; +} + +/** + * ixgbe_set_soft_rate_select_speed - Set module link speed + * @hw: pointer to hardware structure + * @speed: link speed to set + * + * Set module link speed via the soft rate select. + */ +void ixgbe_set_soft_rate_select_speed(struct ixgbe_hw *hw, + ixgbe_link_speed speed) +{ + s32 status; + u8 rs, eeprom_data; + + switch (speed) { + case IXGBE_LINK_SPEED_10GB_FULL: + /* one bit mask same as setting on */ + rs = IXGBE_SFF_SOFT_RS_SELECT_10G; + break; + case IXGBE_LINK_SPEED_1GB_FULL: + rs = IXGBE_SFF_SOFT_RS_SELECT_1G; + break; + default: + hw_dbg(hw, "Invalid fixed module speed\n"); + return; + } + + /* Set RS0 */ + status = hw->phy.ops.read_i2c_byte(hw, IXGBE_SFF_SFF_8472_OSCB, + IXGBE_I2C_EEPROM_DEV_ADDR2, + &eeprom_data); + if (status) { + hw_dbg(hw, "Failed to read Rx Rate Select RS0\n"); + return; + } + + eeprom_data = (eeprom_data & ~IXGBE_SFF_SOFT_RS_SELECT_MASK) | rs; + + status = hw->phy.ops.write_i2c_byte(hw, IXGBE_SFF_SFF_8472_OSCB, + IXGBE_I2C_EEPROM_DEV_ADDR2, + eeprom_data); + if (status) { + hw_dbg(hw, "Failed to write Rx Rate Select RS0\n"); + return; + } +} diff --git a/kernel/drivers/net/ethernet/intel/ixgbe/ixgbe_common.h b/kernel/drivers/net/ethernet/intel/ixgbe/ixgbe_common.h index f21f8a165..a0044e4a8 100644 --- a/kernel/drivers/net/ethernet/intel/ixgbe/ixgbe_common.h +++ b/kernel/drivers/net/ethernet/intel/ixgbe/ixgbe_common.h @@ -113,11 +113,14 @@ s32 ixgbe_set_fw_drv_ver_generic(struct ixgbe_hw *hw, u8 maj, u8 min, s32 ixgbe_host_interface_command(struct ixgbe_hw *hw, u32 *buffer, u32 length, u32 timeout, bool return_data); void ixgbe_clear_tx_pending(struct ixgbe_hw *hw); +bool ixgbe_mng_present(struct ixgbe_hw *hw); bool ixgbe_mng_enabled(struct ixgbe_hw *hw); void ixgbe_set_rxpba_generic(struct ixgbe_hw *hw, int num_pb, u32 headroom, int strategy); +extern const u32 ixgbe_mvals_8259X[IXGBE_MVALS_IDX_LIMIT]; + #define IXGBE_I2C_THERMAL_SENSOR_ADDR 0xF8 #define IXGBE_EMC_INTERNAL_DATA 0x00 #define IXGBE_EMC_INTERNAL_THERM_LIMIT 0x20 @@ -132,6 +135,11 @@ s32 ixgbe_get_thermal_sensor_data_generic(struct ixgbe_hw *hw); s32 ixgbe_init_thermal_sensor_thresh_generic(struct ixgbe_hw *hw); void ixgbe_disable_rx_generic(struct ixgbe_hw *hw); void ixgbe_enable_rx_generic(struct ixgbe_hw *hw); +s32 ixgbe_setup_mac_link_multispeed_fiber(struct ixgbe_hw *hw, + ixgbe_link_speed speed, + bool autoneg_wait_to_complete); +void ixgbe_set_soft_rate_select_speed(struct ixgbe_hw *hw, + ixgbe_link_speed speed); #define IXGBE_FAILED_READ_REG 0xffffffffU #define IXGBE_FAILED_READ_CFG_DWORD 0xffffffffU diff --git a/kernel/drivers/net/ethernet/intel/ixgbe/ixgbe_dcb_82599.c b/kernel/drivers/net/ethernet/intel/ixgbe/ixgbe_dcb_82599.c index 3b932fe64..23277ab15 100644 --- a/kernel/drivers/net/ethernet/intel/ixgbe/ixgbe_dcb_82599.c +++ b/kernel/drivers/net/ethernet/intel/ixgbe/ixgbe_dcb_82599.c @@ -259,7 +259,13 @@ s32 ixgbe_dcb_config_pfc_82599(struct ixgbe_hw *hw, u8 pfc_en, u8 *prio_tc) fcrtl = (hw->fc.low_water[i] << 10) | IXGBE_FCRTL_XONE; IXGBE_WRITE_REG(hw, IXGBE_FCRTL_82599(i), fcrtl); } else { - reg = IXGBE_READ_REG(hw, IXGBE_RXPBSIZE(i)) - 32; + /* In order to prevent Tx hangs when the internal Tx + * switch is enabled we must set the high water mark + * to the Rx packet buffer size - 24KB. This allows + * the Tx switch to function even under heavy Rx + * workloads. + */ + reg = IXGBE_READ_REG(hw, IXGBE_RXPBSIZE(i)) - 24576; IXGBE_WRITE_REG(hw, IXGBE_FCRTL_82599(i), 0); } diff --git a/kernel/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c b/kernel/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c index eafa9ec80..d681273bd 100644 --- a/kernel/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c +++ b/kernel/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c @@ -166,6 +166,8 @@ static int ixgbe_get_settings(struct net_device *netdev, /* set the supported link speeds */ if (supported_link & IXGBE_LINK_SPEED_10GB_FULL) ecmd->supported |= SUPPORTED_10000baseT_Full; + if (supported_link & IXGBE_LINK_SPEED_2_5GB_FULL) + ecmd->supported |= SUPPORTED_2500baseX_Full; if (supported_link & IXGBE_LINK_SPEED_1GB_FULL) ecmd->supported |= SUPPORTED_1000baseT_Full; if (supported_link & IXGBE_LINK_SPEED_100_FULL) @@ -177,6 +179,8 @@ static int ixgbe_get_settings(struct net_device *netdev, ecmd->advertising |= ADVERTISED_100baseT_Full; if (hw->phy.autoneg_advertised & IXGBE_LINK_SPEED_10GB_FULL) ecmd->advertising |= ADVERTISED_10000baseT_Full; + if (hw->phy.autoneg_advertised & IXGBE_LINK_SPEED_2_5GB_FULL) + ecmd->advertising |= ADVERTISED_2500baseX_Full; if (hw->phy.autoneg_advertised & IXGBE_LINK_SPEED_1GB_FULL) ecmd->advertising |= ADVERTISED_1000baseT_Full; } else { @@ -207,6 +211,7 @@ static int ixgbe_get_settings(struct net_device *netdev, switch (adapter->hw.phy.type) { case ixgbe_phy_tn: case ixgbe_phy_aq: + case ixgbe_phy_x550em_ext_t: case ixgbe_phy_cu_unknown: ecmd->supported |= SUPPORTED_TP; ecmd->advertising |= ADVERTISED_TP; @@ -285,6 +290,9 @@ static int ixgbe_get_settings(struct net_device *netdev, case IXGBE_LINK_SPEED_10GB_FULL: ethtool_cmd_speed_set(ecmd, SPEED_10000); break; + case IXGBE_LINK_SPEED_2_5GB_FULL: + ethtool_cmd_speed_set(ecmd, SPEED_2500); + break; case IXGBE_LINK_SPEED_1GB_FULL: ethtool_cmd_speed_set(ecmd, SPEED_1000); break; @@ -470,16 +478,16 @@ static void ixgbe_get_regs(struct net_device *netdev, regs_buff[7] = IXGBE_READ_REG(hw, IXGBE_TCPTIMER); /* NVM Register */ - regs_buff[8] = IXGBE_READ_REG(hw, IXGBE_EEC); + regs_buff[8] = IXGBE_READ_REG(hw, IXGBE_EEC(hw)); regs_buff[9] = IXGBE_READ_REG(hw, IXGBE_EERD); - regs_buff[10] = IXGBE_READ_REG(hw, IXGBE_FLA); + regs_buff[10] = IXGBE_READ_REG(hw, IXGBE_FLA(hw)); regs_buff[11] = IXGBE_READ_REG(hw, IXGBE_EEMNGCTL); regs_buff[12] = IXGBE_READ_REG(hw, IXGBE_EEMNGDATA); regs_buff[13] = IXGBE_READ_REG(hw, IXGBE_FLMNGCTL); regs_buff[14] = IXGBE_READ_REG(hw, IXGBE_FLMNGDATA); regs_buff[15] = IXGBE_READ_REG(hw, IXGBE_FLMNGCNT); regs_buff[16] = IXGBE_READ_REG(hw, IXGBE_FLOP); - regs_buff[17] = IXGBE_READ_REG(hw, IXGBE_GRC); + regs_buff[17] = IXGBE_READ_REG(hw, IXGBE_GRC(hw)); /* Interrupt */ /* don't read EICR because it can clear interrupt causes, instead @@ -935,9 +943,6 @@ static void ixgbe_get_drvinfo(struct net_device *netdev, strlcpy(drvinfo->bus_info, pci_name(adapter->pdev), sizeof(drvinfo->bus_info)); - drvinfo->n_stats = IXGBE_STATS_LEN; - drvinfo->testinfo_len = IXGBE_TEST_LEN; - drvinfo->regdump_len = ixgbe_get_regs_len(netdev); } static void ixgbe_get_ringparam(struct net_device *netdev, @@ -2278,7 +2283,7 @@ static int ixgbe_set_coalesce(struct net_device *netdev, adapter->tx_itr_setting = ec->tx_coalesce_usecs; if (adapter->tx_itr_setting == 1) - tx_itr_param = IXGBE_10K_ITR; + tx_itr_param = IXGBE_12K_ITR; else tx_itr_param = adapter->tx_itr_setting; @@ -2594,18 +2599,35 @@ static int ixgbe_add_ethtool_fdir_entry(struct ixgbe_adapter *adapter, struct ixgbe_hw *hw = &adapter->hw; struct ixgbe_fdir_filter *input; union ixgbe_atr_input mask; + u8 queue; int err; if (!(adapter->flags & IXGBE_FLAG_FDIR_PERFECT_CAPABLE)) return -EOPNOTSUPP; - /* - * Don't allow programming if the action is a queue greater than - * the number of online Rx queues. + /* ring_cookie is a masked into a set of queues and ixgbe pools or + * we use the drop index. */ - if ((fsp->ring_cookie != RX_CLS_FLOW_DISC) && - (fsp->ring_cookie >= adapter->num_rx_queues)) - return -EINVAL; + if (fsp->ring_cookie == RX_CLS_FLOW_DISC) { + queue = IXGBE_FDIR_DROP_QUEUE; + } else { + u32 ring = ethtool_get_flow_spec_ring(fsp->ring_cookie); + u8 vf = ethtool_get_flow_spec_ring_vf(fsp->ring_cookie); + + if (!vf && (ring >= adapter->num_rx_queues)) + return -EINVAL; + else if (vf && + ((vf > adapter->num_vfs) || + ring >= adapter->num_rx_queues_per_pool)) + return -EINVAL; + + /* Map the ring onto the absolute queue index */ + if (!vf) + queue = adapter->rx_ring[ring]->reg_idx; + else + queue = ((vf - 1) * + adapter->num_rx_queues_per_pool) + ring; + } /* Don't allow indexes to exist outside of available space */ if (fsp->location >= ((1024 << adapter->fdir_pballoc) - 2)) { @@ -2683,10 +2705,7 @@ static int ixgbe_add_ethtool_fdir_entry(struct ixgbe_adapter *adapter, /* program filters to filter memory */ err = ixgbe_fdir_write_perfect_filter_82599(hw, - &input->filter, input->sw_idx, - (input->action == IXGBE_FDIR_DROP_QUEUE) ? - IXGBE_FDIR_DROP_QUEUE : - adapter->rx_ring[input->action]->reg_idx); + &input->filter, input->sw_idx, queue); if (err) goto err_out_w_lock; @@ -2853,6 +2872,14 @@ static int ixgbe_set_rxnfc(struct net_device *dev, struct ethtool_rxnfc *cmd) return ret; } +static int ixgbe_rss_indir_tbl_max(struct ixgbe_adapter *adapter) +{ + if (adapter->hw.mac.type < ixgbe_mac_X550) + return 16; + else + return 64; +} + static u32 ixgbe_get_rxfh_key_size(struct net_device *netdev) { struct ixgbe_adapter *adapter = netdev_priv(netdev); @@ -2892,6 +2919,44 @@ static int ixgbe_get_rxfh(struct net_device *netdev, u32 *indir, u8 *key, return 0; } +static int ixgbe_set_rxfh(struct net_device *netdev, const u32 *indir, + const u8 *key, const u8 hfunc) +{ + struct ixgbe_adapter *adapter = netdev_priv(netdev); + int i; + u32 reta_entries = ixgbe_rss_indir_tbl_entries(adapter); + + if (hfunc) + return -EINVAL; + + /* Fill out the redirection table */ + if (indir) { + int max_queues = min_t(int, adapter->num_rx_queues, + ixgbe_rss_indir_tbl_max(adapter)); + + /*Allow at least 2 queues w/ SR-IOV.*/ + if ((adapter->flags & IXGBE_FLAG_SRIOV_ENABLED) && + (max_queues < 2)) + max_queues = 2; + + /* Verify user input. */ + for (i = 0; i < reta_entries; i++) + if (indir[i] >= max_queues) + return -EINVAL; + + for (i = 0; i < reta_entries; i++) + adapter->rss_indir_tbl[i] = indir[i]; + } + + /* Fill out the rss hash key */ + if (key) + memcpy(adapter->rss_key, key, ixgbe_get_rxfh_key_size(netdev)); + + ixgbe_store_reta(adapter); + + return 0; +} + static int ixgbe_get_ts_info(struct net_device *dev, struct ethtool_ts_info *info) { @@ -2923,14 +2988,6 @@ static int ixgbe_get_ts_info(struct net_device *dev, (1 << HWTSTAMP_FILTER_NONE) | (1 << HWTSTAMP_FILTER_PTP_V1_L4_SYNC) | (1 << HWTSTAMP_FILTER_PTP_V1_L4_DELAY_REQ) | - (1 << HWTSTAMP_FILTER_PTP_V2_L2_EVENT) | - (1 << HWTSTAMP_FILTER_PTP_V2_L4_EVENT) | - (1 << HWTSTAMP_FILTER_PTP_V2_SYNC) | - (1 << HWTSTAMP_FILTER_PTP_V2_L2_SYNC) | - (1 << HWTSTAMP_FILTER_PTP_V2_L4_SYNC) | - (1 << HWTSTAMP_FILTER_PTP_V2_DELAY_REQ) | - (1 << HWTSTAMP_FILTER_PTP_V2_L2_DELAY_REQ) | - (1 << HWTSTAMP_FILTER_PTP_V2_L4_DELAY_REQ) | (1 << HWTSTAMP_FILTER_PTP_V2_EVENT); break; default: @@ -3053,7 +3110,7 @@ static int ixgbe_get_module_info(struct net_device *dev, { struct ixgbe_adapter *adapter = netdev_priv(dev); struct ixgbe_hw *hw = &adapter->hw; - u32 status; + s32 status; u8 sff8472_rev, addr_mode; bool page_swap = false; @@ -3061,14 +3118,14 @@ static int ixgbe_get_module_info(struct net_device *dev, status = hw->phy.ops.read_i2c_eeprom(hw, IXGBE_SFF_SFF_8472_COMP, &sff8472_rev); - if (status != 0) + if (status) return -EIO; /* addressing mode is not supported */ status = hw->phy.ops.read_i2c_eeprom(hw, IXGBE_SFF_SFF_8472_SWAP, &addr_mode); - if (status != 0) + if (status) return -EIO; if (addr_mode & IXGBE_SFF_ADDRESSING_MODE) { @@ -3095,7 +3152,7 @@ static int ixgbe_get_module_eeprom(struct net_device *dev, { struct ixgbe_adapter *adapter = netdev_priv(dev); struct ixgbe_hw *hw = &adapter->hw; - u32 status = IXGBE_ERR_PHY_ADDR_INVALID; + s32 status = IXGBE_ERR_PHY_ADDR_INVALID; u8 databyte = 0xFF; int i = 0; @@ -3112,7 +3169,7 @@ static int ixgbe_get_module_eeprom(struct net_device *dev, else status = hw->phy.ops.read_i2c_sff8472(hw, i, &databyte); - if (status != 0) + if (status) return -EIO; data[i - ee->offset] = databyte; @@ -3152,6 +3209,7 @@ static const struct ethtool_ops ixgbe_ethtool_ops = { .get_rxfh_indir_size = ixgbe_rss_indir_size, .get_rxfh_key_size = ixgbe_get_rxfh_key_size, .get_rxfh = ixgbe_get_rxfh, + .set_rxfh = ixgbe_set_rxfh, .get_channels = ixgbe_get_channels, .set_channels = ixgbe_set_channels, .get_ts_info = ixgbe_get_ts_info, diff --git a/kernel/drivers/net/ethernet/intel/ixgbe/ixgbe_lib.c b/kernel/drivers/net/ethernet/intel/ixgbe/ixgbe_lib.c index 68e1e757e..f3168bcc7 100644 --- a/kernel/drivers/net/ethernet/intel/ixgbe/ixgbe_lib.c +++ b/kernel/drivers/net/ethernet/intel/ixgbe/ixgbe_lib.c @@ -866,7 +866,7 @@ static int ixgbe_alloc_q_vector(struct ixgbe_adapter *adapter, if (txr_count && !rxr_count) { /* tx only vector */ if (adapter->tx_itr_setting == 1) - q_vector->itr = IXGBE_10K_ITR; + q_vector->itr = IXGBE_12K_ITR; else q_vector->itr = adapter->tx_itr_setting; } else { diff --git a/kernel/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c b/kernel/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c index 463ff4720..aed8d029b 100644 --- a/kernel/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c +++ b/kernel/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c @@ -1,7 +1,7 @@ /******************************************************************************* Intel 10 Gigabit PCI Express Linux driver - Copyright(c) 1999 - 2014 Intel Corporation. + Copyright(c) 1999 - 2015 Intel Corporation. This program is free software; you can redistribute it and/or modify it under the terms and conditions of the GNU General Public License, @@ -65,6 +65,9 @@ #include "ixgbe_common.h" #include "ixgbe_dcb_82599.h" #include "ixgbe_sriov.h" +#ifdef CONFIG_IXGBE_VXLAN +#include <net/vxlan.h> +#endif char ixgbe_driver_name[] = "ixgbe"; static const char ixgbe_driver_string[] = @@ -76,10 +79,12 @@ char ixgbe_default_device_descr[] = static char ixgbe_default_device_descr[] = "Intel(R) 10 Gigabit Network Connection"; #endif -#define DRV_VERSION "4.0.1-k" +#define DRV_VERSION "4.2.1-k" const char ixgbe_driver_version[] = DRV_VERSION; static const char ixgbe_copyright[] = - "Copyright (c) 1999-2014 Intel Corporation."; + "Copyright (c) 1999-2015 Intel Corporation."; + +static const char ixgbe_overheat_msg[] = "Network adapter has been stopped because it has over heated. Restart the computer. If the problem persists, power off the system and replace the adapter"; static const struct ixgbe_info *ixgbe_info_tbl[] = { [board_82598] = &ixgbe_82598_info, @@ -131,6 +136,8 @@ static const struct pci_device_id ixgbe_pci_tbl[] = { {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_X550T), board_X550}, {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_X550EM_X_KX4), board_X550EM_x}, {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_X550EM_X_KR), board_X550EM_x}, + {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_X550EM_X_10G_T), board_X550EM_x}, + {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_X550EM_X_SFP), board_X550EM_x}, /* required last entry */ {0, } }; @@ -240,13 +247,20 @@ static inline bool ixgbe_pcie_from_parent(struct ixgbe_hw *hw) static void ixgbe_check_minimum_link(struct ixgbe_adapter *adapter, int expected_gts) { + struct ixgbe_hw *hw = &adapter->hw; int max_gts = 0; enum pci_bus_speed speed = PCI_SPEED_UNKNOWN; enum pcie_link_width width = PCIE_LNK_WIDTH_UNKNOWN; struct pci_dev *pdev; - /* determine whether to use the the parent device + /* Some devices are not connected over PCIe and thus do not negotiate + * speed. These devices do not have valid bus info, and thus any report + * we generate may not be correct. */ + if (hw->bus.type == ixgbe_bus_type_internal) + return; + + /* determine whether to use the parent device */ if (ixgbe_pcie_from_parent(&adapter->hw)) pdev = adapter->pdev->bus->parent->self; else @@ -1231,9 +1245,12 @@ static void ixgbe_update_tx_dca(struct ixgbe_adapter *adapter, int cpu) { struct ixgbe_hw *hw = &adapter->hw; - u32 txctrl = dca3_get_tag(tx_ring->dev, cpu); + u32 txctrl = 0; u16 reg_offset; + if (adapter->flags & IXGBE_FLAG_DCA_ENABLED) + txctrl = dca3_get_tag(tx_ring->dev, cpu); + switch (hw->mac.type) { case ixgbe_mac_82598EB: reg_offset = IXGBE_DCA_TXCTRL(tx_ring->reg_idx); @@ -1265,9 +1282,11 @@ static void ixgbe_update_rx_dca(struct ixgbe_adapter *adapter, int cpu) { struct ixgbe_hw *hw = &adapter->hw; - u32 rxctrl = dca3_get_tag(rx_ring->dev, cpu); + u32 rxctrl = 0; u8 reg_idx = rx_ring->reg_idx; + if (adapter->flags & IXGBE_FLAG_DCA_ENABLED) + rxctrl = dca3_get_tag(rx_ring->dev, cpu); switch (hw->mac.type) { case ixgbe_mac_82599EB: @@ -1284,6 +1303,7 @@ static void ixgbe_update_rx_dca(struct ixgbe_adapter *adapter, * which will cause the DCA tag to be cleared. */ rxctrl |= IXGBE_DCA_RXCTRL_DESC_RRO_EN | + IXGBE_DCA_RXCTRL_DATA_DCA_EN | IXGBE_DCA_RXCTRL_DESC_DCA_EN; IXGBE_WRITE_REG(hw, IXGBE_DCA_RXCTRL(reg_idx), rxctrl); @@ -1313,11 +1333,13 @@ static void ixgbe_setup_dca(struct ixgbe_adapter *adapter) { int i; - if (!(adapter->flags & IXGBE_FLAG_DCA_ENABLED)) - return; - /* always use CB2 mode, difference is masked in the CB driver */ - IXGBE_WRITE_REG(&adapter->hw, IXGBE_DCA_CTRL, 2); + if (adapter->flags & IXGBE_FLAG_DCA_ENABLED) + IXGBE_WRITE_REG(&adapter->hw, IXGBE_DCA_CTRL, + IXGBE_DCA_CTRL_DCA_MODE_CB2); + else + IXGBE_WRITE_REG(&adapter->hw, IXGBE_DCA_CTRL, + IXGBE_DCA_CTRL_DCA_DISABLE); for (i = 0; i < adapter->num_q_vectors; i++) { adapter->q_vector[i]->cpu = -1; @@ -1340,7 +1362,8 @@ static int __ixgbe_notify_dca(struct device *dev, void *data) break; if (dca_add_requester(dev) == 0) { adapter->flags |= IXGBE_FLAG_DCA_ENABLED; - ixgbe_setup_dca(adapter); + IXGBE_WRITE_REG(&adapter->hw, IXGBE_DCA_CTRL, + IXGBE_DCA_CTRL_DCA_MODE_CB2); break; } /* Fall Through since DCA is disabled. */ @@ -1348,7 +1371,8 @@ static int __ixgbe_notify_dca(struct device *dev, void *data) if (adapter->flags & IXGBE_FLAG_DCA_ENABLED) { dca_remove_requester(dev); adapter->flags &= ~IXGBE_FLAG_DCA_ENABLED; - IXGBE_WRITE_REG(&adapter->hw, IXGBE_DCA_CTRL, 1); + IXGBE_WRITE_REG(&adapter->hw, IXGBE_DCA_CTRL, + IXGBE_DCA_CTRL_DCA_DISABLE); } break; } @@ -1357,14 +1381,31 @@ static int __ixgbe_notify_dca(struct device *dev, void *data) } #endif /* CONFIG_IXGBE_DCA */ + +#define IXGBE_RSS_L4_TYPES_MASK \ + ((1ul << IXGBE_RXDADV_RSSTYPE_IPV4_TCP) | \ + (1ul << IXGBE_RXDADV_RSSTYPE_IPV4_UDP) | \ + (1ul << IXGBE_RXDADV_RSSTYPE_IPV6_TCP) | \ + (1ul << IXGBE_RXDADV_RSSTYPE_IPV6_UDP)) + static inline void ixgbe_rx_hash(struct ixgbe_ring *ring, union ixgbe_adv_rx_desc *rx_desc, struct sk_buff *skb) { - if (ring->netdev->features & NETIF_F_RXHASH) - skb_set_hash(skb, - le32_to_cpu(rx_desc->wb.lower.hi_dword.rss), - PKT_HASH_TYPE_L3); + u16 rss_type; + + if (!(ring->netdev->features & NETIF_F_RXHASH)) + return; + + rss_type = le16_to_cpu(rx_desc->wb.lower.lo_dword.hs_rss.pkt_info) & + IXGBE_RXDADV_RSSTYPE_MASK; + + if (!rss_type) + return; + + skb_set_hash(skb, le32_to_cpu(rx_desc->wb.lower.hi_dword.rss), + (IXGBE_RSS_L4_TYPES_MASK & (1ul << rss_type)) ? + PKT_HASH_TYPE_L4 : PKT_HASH_TYPE_L3); } #ifdef IXGBE_FCOE @@ -1411,7 +1452,6 @@ static inline void ixgbe_rx_checksum(struct ixgbe_ring *ring, (hdr_info & cpu_to_le16(IXGBE_RXDADV_PKTTYPE_TUNNEL >> 16))) { encap_pkt = true; skb->encapsulation = 1; - skb->ip_summed = CHECKSUM_NONE; } /* if IP and error */ @@ -2232,7 +2272,7 @@ static void ixgbe_update_itr(struct ixgbe_q_vector *q_vector, /* simple throttlerate management * 0-10MB/s lowest (100000 ints/s) * 10-20MB/s low (20000 ints/s) - * 20-1249MB/s bulk (8000 ints/s) + * 20-1249MB/s bulk (12000 ints/s) */ /* what was last interrupt timeslice? */ timepassed_us = q_vector->itr >> 2; @@ -2321,7 +2361,7 @@ static void ixgbe_set_itr(struct ixgbe_q_vector *q_vector) new_itr = IXGBE_20K_ITR; break; case bulk_latency: - new_itr = IXGBE_8K_ITR; + new_itr = IXGBE_12K_ITR; break; default: break; @@ -2366,7 +2406,7 @@ static void ixgbe_check_overtemp_subtask(struct ixgbe_adapter *adapter) * - We may have missed the interrupt so always have to * check if we got a LSC */ - if (!(eicr & IXGBE_EICR_GPI_SDP0) && + if (!(eicr & IXGBE_EICR_GPI_SDP0_8259X) && !(eicr & IXGBE_EICR_LSC)) return; @@ -2386,14 +2426,13 @@ static void ixgbe_check_overtemp_subtask(struct ixgbe_adapter *adapter) break; default: - if (!(eicr & IXGBE_EICR_GPI_SDP0)) + if (adapter->hw.mac.type >= ixgbe_mac_X540) + return; + if (!(eicr & IXGBE_EICR_GPI_SDP0(hw))) return; break; } - e_crit(drv, - "Network adapter has been stopped because it has over heated. " - "Restart the computer. If the problem persists, " - "power off the system and replace the adapter\n"); + e_crit(drv, "%s\n", ixgbe_overheat_msg); adapter->interrupt_event = 0; } @@ -2403,15 +2442,17 @@ static void ixgbe_check_fan_failure(struct ixgbe_adapter *adapter, u32 eicr) struct ixgbe_hw *hw = &adapter->hw; if ((adapter->flags & IXGBE_FLAG_FAN_FAIL_CAPABLE) && - (eicr & IXGBE_EICR_GPI_SDP1)) { + (eicr & IXGBE_EICR_GPI_SDP1(hw))) { e_crit(probe, "Fan has stopped, replace the adapter\n"); /* write to clear the interrupt */ - IXGBE_WRITE_REG(hw, IXGBE_EICR, IXGBE_EICR_GPI_SDP1); + IXGBE_WRITE_REG(hw, IXGBE_EICR, IXGBE_EICR_GPI_SDP1(hw)); } } static void ixgbe_check_overtemp_event(struct ixgbe_adapter *adapter, u32 eicr) { + struct ixgbe_hw *hw = &adapter->hw; + if (!(adapter->flags2 & IXGBE_FLAG2_TEMP_SENSOR_CAPABLE)) return; @@ -2421,7 +2462,8 @@ static void ixgbe_check_overtemp_event(struct ixgbe_adapter *adapter, u32 eicr) * Need to check link state so complete overtemp check * on service task */ - if (((eicr & IXGBE_EICR_GPI_SDP0) || (eicr & IXGBE_EICR_LSC)) && + if (((eicr & IXGBE_EICR_GPI_SDP0(hw)) || + (eicr & IXGBE_EICR_LSC)) && (!test_bit(__IXGBE_DOWN, &adapter->state))) { adapter->interrupt_event = eicr; adapter->flags2 |= IXGBE_FLAG2_TEMP_SENSOR_EVENT; @@ -2437,28 +2479,56 @@ static void ixgbe_check_overtemp_event(struct ixgbe_adapter *adapter, u32 eicr) return; } - e_crit(drv, - "Network adapter has been stopped because it has over heated. " - "Restart the computer. If the problem persists, " - "power off the system and replace the adapter\n"); + e_crit(drv, "%s\n", ixgbe_overheat_msg); +} + +static inline bool ixgbe_is_sfp(struct ixgbe_hw *hw) +{ + switch (hw->mac.type) { + case ixgbe_mac_82598EB: + if (hw->phy.type == ixgbe_phy_nl) + return true; + return false; + case ixgbe_mac_82599EB: + case ixgbe_mac_X550EM_x: + switch (hw->mac.ops.get_media_type(hw)) { + case ixgbe_media_type_fiber: + case ixgbe_media_type_fiber_qsfp: + return true; + default: + return false; + } + default: + return false; + } } static void ixgbe_check_sfp_event(struct ixgbe_adapter *adapter, u32 eicr) { struct ixgbe_hw *hw = &adapter->hw; + u32 eicr_mask = IXGBE_EICR_GPI_SDP2(hw); - if (eicr & IXGBE_EICR_GPI_SDP2) { + if (!ixgbe_is_sfp(hw)) + return; + + /* Later MAC's use different SDP */ + if (hw->mac.type >= ixgbe_mac_X540) + eicr_mask = IXGBE_EICR_GPI_SDP0_X540; + + if (eicr & eicr_mask) { /* Clear the interrupt */ - IXGBE_WRITE_REG(hw, IXGBE_EICR, IXGBE_EICR_GPI_SDP2); + IXGBE_WRITE_REG(hw, IXGBE_EICR, eicr_mask); if (!test_bit(__IXGBE_DOWN, &adapter->state)) { adapter->flags2 |= IXGBE_FLAG2_SFP_NEEDS_RESET; + adapter->sfp_poll_time = 0; ixgbe_service_event_schedule(adapter); } } - if (eicr & IXGBE_EICR_GPI_SDP1) { + if (adapter->hw.mac.type == ixgbe_mac_82599EB && + (eicr & IXGBE_EICR_GPI_SDP1(hw))) { /* Clear the interrupt */ - IXGBE_WRITE_REG(hw, IXGBE_EICR, IXGBE_EICR_GPI_SDP1); + IXGBE_WRITE_REG(hw, IXGBE_EICR, IXGBE_EICR_GPI_SDP1(hw)); if (!test_bit(__IXGBE_DOWN, &adapter->state)) { adapter->flags |= IXGBE_FLAG_NEED_LINK_CONFIG; ixgbe_service_event_schedule(adapter); @@ -2543,6 +2613,7 @@ static inline void ixgbe_irq_disable_queues(struct ixgbe_adapter *adapter, static inline void ixgbe_irq_enable(struct ixgbe_adapter *adapter, bool queues, bool flush) { + struct ixgbe_hw *hw = &adapter->hw; u32 mask = (IXGBE_EIMS_ENABLE_MASK & ~IXGBE_EIMS_RTX_QUEUE); /* don't reenable LSC while waiting for link */ @@ -2552,7 +2623,7 @@ static inline void ixgbe_irq_enable(struct ixgbe_adapter *adapter, bool queues, if (adapter->flags2 & IXGBE_FLAG2_TEMP_SENSOR_CAPABLE) switch (adapter->hw.mac.type) { case ixgbe_mac_82599EB: - mask |= IXGBE_EIMS_GPI_SDP0; + mask |= IXGBE_EIMS_GPI_SDP0(hw); break; case ixgbe_mac_X540: case ixgbe_mac_X550: @@ -2563,15 +2634,19 @@ static inline void ixgbe_irq_enable(struct ixgbe_adapter *adapter, bool queues, break; } if (adapter->flags & IXGBE_FLAG_FAN_FAIL_CAPABLE) - mask |= IXGBE_EIMS_GPI_SDP1; + mask |= IXGBE_EIMS_GPI_SDP1(hw); switch (adapter->hw.mac.type) { case ixgbe_mac_82599EB: - mask |= IXGBE_EIMS_GPI_SDP1; - mask |= IXGBE_EIMS_GPI_SDP2; + mask |= IXGBE_EIMS_GPI_SDP1(hw); + mask |= IXGBE_EIMS_GPI_SDP2(hw); /* fall through */ case ixgbe_mac_X540: case ixgbe_mac_X550: case ixgbe_mac_X550EM_x: + if (adapter->hw.device_id == IXGBE_DEV_ID_X550EM_X_SFP) + mask |= IXGBE_EIMS_GPI_SDP0(&adapter->hw); + if (adapter->hw.phy.type == ixgbe_phy_x550em_ext_t) + mask |= IXGBE_EICR_GPI_SDP0_X540; mask |= IXGBE_EIMS_ECC; mask |= IXGBE_EIMS_MAILBOX; break; @@ -2626,6 +2701,13 @@ static irqreturn_t ixgbe_msix_other(int irq, void *data) case ixgbe_mac_X540: case ixgbe_mac_X550: case ixgbe_mac_X550EM_x: + if (hw->phy.type == ixgbe_phy_x550em_ext_t && + (eicr & IXGBE_EICR_GPI_SDP0_X540)) { + adapter->flags2 |= IXGBE_FLAG2_PHY_INTERRUPT; + ixgbe_service_event_schedule(adapter); + IXGBE_WRITE_REG(hw, IXGBE_EICR, + IXGBE_EICR_GPI_SDP0_X540); + } if (eicr & IXGBE_EICR_ECC) { e_info(link, "Received ECC Err, initiating reset\n"); adapter->flags2 |= IXGBE_FLAG2_RESET_REQUESTED; @@ -2693,7 +2775,7 @@ int ixgbe_poll(struct napi_struct *napi, int budget) container_of(napi, struct ixgbe_q_vector, napi); struct ixgbe_adapter *adapter = q_vector->adapter; struct ixgbe_ring *ring; - int per_ring_budget; + int per_ring_budget, work_done = 0; bool clean_complete = true; #ifdef CONFIG_IXGBE_DCA @@ -2714,9 +2796,13 @@ int ixgbe_poll(struct napi_struct *napi, int budget) else per_ring_budget = budget; - ixgbe_for_each_ring(ring, q_vector->rx) - clean_complete &= (ixgbe_clean_rx_irq(q_vector, ring, - per_ring_budget) < per_ring_budget); + ixgbe_for_each_ring(ring, q_vector->rx) { + int cleaned = ixgbe_clean_rx_irq(q_vector, ring, + per_ring_budget); + + work_done += cleaned; + clean_complete &= (cleaned < per_ring_budget); + } ixgbe_qv_unlock_napi(q_vector); /* If all work not completed, return budget and keep polling */ @@ -2724,7 +2810,7 @@ int ixgbe_poll(struct napi_struct *napi, int budget) return budget; /* all work done, exit the polling mode */ - napi_complete(napi); + napi_complete_done(napi, work_done); if (adapter->rx_itr_setting & 1) ixgbe_set_itr(q_vector); if (!test_bit(__IXGBE_DOWN, &adapter->state)) @@ -3254,7 +3340,7 @@ u32 ixgbe_rss_indir_tbl_entries(struct ixgbe_adapter *adapter) * * Write the RSS redirection table stored in adapter.rss_indir_tbl[] to HW. */ -static void ixgbe_store_reta(struct ixgbe_adapter *adapter) +void ixgbe_store_reta(struct ixgbe_adapter *adapter) { u32 i, reta_entries = ixgbe_rss_indir_tbl_entries(adapter); struct ixgbe_hw *hw = &adapter->hw; @@ -3641,14 +3727,20 @@ static void ixgbe_configure_virtualization(struct ixgbe_adapter *adapter) hw->mac.ops.set_mac_anti_spoofing(hw, (adapter->num_vfs != 0), adapter->num_vfs); - /* Ensure LLDP is set for Ethertype Antispoofing if we will be + /* Ensure LLDP and FC is set for Ethertype Antispoofing if we will be * calling set_ethertype_anti_spoofing for each VF in loop below */ - if (hw->mac.ops.set_ethertype_anti_spoofing) + if (hw->mac.ops.set_ethertype_anti_spoofing) { IXGBE_WRITE_REG(hw, IXGBE_ETQF(IXGBE_ETQF_FILTER_LLDP), - (IXGBE_ETQF_FILTER_EN | /* enable filter */ - IXGBE_ETQF_TX_ANTISPOOF | /* tx antispoof */ - IXGBE_ETH_P_LLDP)); /* LLDP eth type */ + (IXGBE_ETQF_FILTER_EN | + IXGBE_ETQF_TX_ANTISPOOF | + IXGBE_ETH_P_LLDP)); + + IXGBE_WRITE_REG(hw, IXGBE_ETQF(IXGBE_ETQF_FILTER_FC), + (IXGBE_ETQF_FILTER_EN | + IXGBE_ETQF_TX_ANTISPOOF | + ETH_P_PAUSE)); + } /* For VFs that have spoof checking turned off */ for (i = 0; i < adapter->num_vfs; i++) { @@ -3718,8 +3810,6 @@ static void ixgbe_setup_rdrxctl(struct ixgbe_adapter *adapter) u32 rdrxctl = IXGBE_READ_REG(hw, IXGBE_RDRXCTL); switch (hw->mac.type) { - case ixgbe_mac_X550: - case ixgbe_mac_X550EM_x: case ixgbe_mac_82598EB: /* * For VMDq support of different descriptor types or @@ -3733,6 +3823,11 @@ static void ixgbe_setup_rdrxctl(struct ixgbe_adapter *adapter) */ rdrxctl |= IXGBE_RDRXCTL_MVMEN; break; + case ixgbe_mac_X550: + case ixgbe_mac_X550EM_x: + if (adapter->num_vfs) + rdrxctl |= IXGBE_RDRXCTL_PSP; + /* fall through for older HW */ case ixgbe_mac_82599EB: case ixgbe_mac_X540: /* Disable RSC for ACK packets */ @@ -4212,6 +4307,21 @@ static void ixgbe_napi_disable_all(struct ixgbe_adapter *adapter) } } +static void ixgbe_clear_vxlan_port(struct ixgbe_adapter *adapter) +{ + switch (adapter->hw.mac.type) { + case ixgbe_mac_X550: + case ixgbe_mac_X550EM_x: + IXGBE_WRITE_REG(&adapter->hw, IXGBE_VXLANCTRL, 0); +#ifdef CONFIG_IXGBE_VXLAN + adapter->vxlan_port = 0; +#endif + break; + default: + break; + } +} + #ifdef CONFIG_IXGBE_DCB /** * ixgbe_configure_dcb - Configure DCB hardware @@ -4693,6 +4803,12 @@ static void ixgbe_configure(struct ixgbe_adapter *adapter) break; } +#ifdef CONFIG_IXGBE_DCA + /* configure DCA */ + if (adapter->flags & IXGBE_FLAG_DCA_CAPABLE) + ixgbe_setup_dca(adapter); +#endif /* CONFIG_IXGBE_DCA */ + #ifdef IXGBE_FCOE /* configure FCoE L2 filters, redirection table, and Rx control */ ixgbe_configure_fcoe(adapter); @@ -4703,32 +4819,6 @@ static void ixgbe_configure(struct ixgbe_adapter *adapter) ixgbe_configure_dfwd(adapter); } -static inline bool ixgbe_is_sfp(struct ixgbe_hw *hw) -{ - switch (hw->phy.type) { - case ixgbe_phy_sfp_avago: - case ixgbe_phy_sfp_ftl: - case ixgbe_phy_sfp_intel: - case ixgbe_phy_sfp_unknown: - case ixgbe_phy_sfp_passive_tyco: - case ixgbe_phy_sfp_passive_unknown: - case ixgbe_phy_sfp_active_unknown: - case ixgbe_phy_sfp_ftl_active: - case ixgbe_phy_qsfp_passive_unknown: - case ixgbe_phy_qsfp_active_unknown: - case ixgbe_phy_qsfp_intel: - case ixgbe_phy_qsfp_unknown: - /* ixgbe_phy_none is set when no SFP module is present */ - case ixgbe_phy_none: - return true; - case ixgbe_phy_nl: - if (hw->mac.type == ixgbe_mac_82598EB) - return true; - default: - return false; - } -} - /** * ixgbe_sfp_link_config - set up SFP+ link * @adapter: pointer to private adapter struct @@ -4745,6 +4835,7 @@ static void ixgbe_sfp_link_config(struct ixgbe_adapter *adapter) adapter->flags2 |= IXGBE_FLAG2_SEARCH_FOR_SFP; adapter->flags2 |= IXGBE_FLAG2_SFP_NEEDS_RESET; + adapter->sfp_poll_time = 0; } /** @@ -4757,7 +4848,7 @@ static int ixgbe_non_sfp_link_config(struct ixgbe_hw *hw) { u32 speed; bool autoneg, link_up = false; - u32 ret = IXGBE_ERR_LINK_SETUP; + int ret = IXGBE_ERR_LINK_SETUP; if (hw->mac.ops.check_link) ret = hw->mac.ops.check_link(hw, &speed, &link_up, false); @@ -4833,10 +4924,7 @@ static void ixgbe_setup_gpie(struct ixgbe_adapter *adapter) if (adapter->flags2 & IXGBE_FLAG2_TEMP_SENSOR_CAPABLE) { switch (adapter->hw.mac.type) { case ixgbe_mac_82599EB: - gpie |= IXGBE_SDP0_GPIEN; - break; - case ixgbe_mac_X540: - gpie |= IXGBE_EIMS_TS; + gpie |= IXGBE_SDP0_GPIEN_8259X; break; default: break; @@ -4845,11 +4933,17 @@ static void ixgbe_setup_gpie(struct ixgbe_adapter *adapter) /* Enable fan failure interrupt */ if (adapter->flags & IXGBE_FLAG_FAN_FAIL_CAPABLE) - gpie |= IXGBE_SDP1_GPIEN; + gpie |= IXGBE_SDP1_GPIEN(hw); - if (hw->mac.type == ixgbe_mac_82599EB) { - gpie |= IXGBE_SDP1_GPIEN; - gpie |= IXGBE_SDP2_GPIEN; + switch (hw->mac.type) { + case ixgbe_mac_82599EB: + gpie |= IXGBE_SDP1_GPIEN_8259X | IXGBE_SDP2_GPIEN_8259X; + break; + case ixgbe_mac_X550EM_x: + gpie |= IXGBE_SDP0_GPIEN_X540; + break; + default: + break; } IXGBE_WRITE_REG(hw, IXGBE_GPIE, gpie); @@ -4873,6 +4967,9 @@ static void ixgbe_up_complete(struct ixgbe_adapter *adapter) if (hw->mac.ops.enable_tx_laser) hw->mac.ops.enable_tx_laser(hw); + if (hw->phy.ops.set_phy_power) + hw->phy.ops.set_phy_power(hw, true); + smp_mb__before_atomic(); clear_bit(__IXGBE_DOWN, &adapter->state); ixgbe_napi_enable_all(adapter); @@ -4992,6 +5089,13 @@ void ixgbe_reset(struct ixgbe_adapter *adapter) if (test_bit(__IXGBE_PTP_RUNNING, &adapter->state)) ixgbe_ptp_reset(adapter); + + if (hw->phy.ops.set_phy_power) { + if (!netif_running(adapter->netdev) && !adapter->wol) + hw->phy.ops.set_phy_power(hw, false); + else + hw->phy.ops.set_phy_power(hw, true); + } } /** @@ -5162,11 +5266,6 @@ void ixgbe_down(struct ixgbe_adapter *adapter) ixgbe_clean_all_tx_rings(adapter); ixgbe_clean_all_rx_rings(adapter); - -#ifdef CONFIG_IXGBE_DCA - /* since we reset the hardware DCA settings were cleared */ - ixgbe_setup_dca(adapter); -#endif } /** @@ -5212,7 +5311,6 @@ static int ixgbe_sw_init(struct ixgbe_adapter *adapter) rss = min_t(int, ixgbe_max_rss_indices(adapter), num_online_cpus()); adapter->ring_feature[RING_F_RSS].limit = rss; adapter->flags2 |= IXGBE_FLAG2_RSC_CAPABLE; - adapter->flags2 |= IXGBE_FLAG2_RSC_ENABLED; adapter->max_q_vectors = MAX_Q_VECTORS_82599; adapter->atr_sample_rate = 20; fdir = min_t(int, IXGBE_MAX_FDIR_INDICES, num_online_cpus()); @@ -5238,7 +5336,6 @@ static int ixgbe_sw_init(struct ixgbe_adapter *adapter) switch (hw->mac.type) { case ixgbe_mac_82598EB: adapter->flags2 &= ~IXGBE_FLAG2_RSC_CAPABLE; - adapter->flags2 &= ~IXGBE_FLAG2_RSC_ENABLED; if (hw->device_id == IXGBE_DEV_ID_82598AT) adapter->flags |= IXGBE_FLAG_FAN_FAIL_CAPABLE; @@ -5260,7 +5357,7 @@ static int ixgbe_sw_init(struct ixgbe_adapter *adapter) adapter->flags2 |= IXGBE_FLAG2_TEMP_SENSOR_CAPABLE; break; case ixgbe_mac_X540: - fwsm = IXGBE_READ_REG(hw, IXGBE_FWSM); + fwsm = IXGBE_READ_REG(hw, IXGBE_FWSM(hw)); if (fwsm & IXGBE_FWSM_TS_ENABLED) adapter->flags2 |= IXGBE_FLAG2_TEMP_SENSOR_CAPABLE; break; @@ -5269,6 +5366,9 @@ static int ixgbe_sw_init(struct ixgbe_adapter *adapter) #ifdef CONFIG_IXGBE_DCA adapter->flags &= ~IXGBE_FLAG_DCA_CAPABLE; #endif +#ifdef CONFIG_IXGBE_VXLAN + adapter->flags |= IXGBE_FLAG_VXLAN_OFFLOAD_CAPABLE; +#endif break; default: break; @@ -5672,6 +5772,7 @@ static int ixgbe_change_mtu(struct net_device *netdev, int new_mtu) static int ixgbe_open(struct net_device *netdev) { struct ixgbe_adapter *adapter = netdev_priv(netdev); + struct ixgbe_hw *hw = &adapter->hw; int err, queues; /* disallow open during test */ @@ -5719,16 +5820,19 @@ static int ixgbe_open(struct net_device *netdev) ixgbe_up_complete(adapter); -#if IS_ENABLED(CONFIG_IXGBE_VXLAN) + ixgbe_clear_vxlan_port(adapter); +#ifdef CONFIG_IXGBE_VXLAN vxlan_get_rx_port(netdev); - #endif + return 0; err_set_queues: ixgbe_free_irq(adapter); err_req_irq: ixgbe_free_all_rx_resources(adapter); + if (hw->phy.ops.set_phy_power && !adapter->wol) + hw->phy.ops.set_phy_power(&adapter->hw, false); err_setup_rx: ixgbe_free_all_tx_resources(adapter); err_setup_tx: @@ -5741,7 +5845,15 @@ static void ixgbe_close_suspend(struct ixgbe_adapter *adapter) { ixgbe_ptp_suspend(adapter); - ixgbe_down(adapter); + if (adapter->hw.phy.ops.enter_lplu) { + adapter->hw.phy.reset_disable = true; + ixgbe_down(adapter); + adapter->hw.phy.ops.enter_lplu(&adapter->hw); + adapter->hw.phy.reset_disable = false; + } else { + ixgbe_down(adapter); + } + ixgbe_free_irq(adapter); ixgbe_free_all_tx_resources(adapter); @@ -5889,6 +6001,8 @@ static int __ixgbe_shutdown(struct pci_dev *pdev, bool *enable_wake) } *enable_wake = !!wufc; + if (hw->phy.ops.set_phy_power && !*enable_wake) + hw->phy.ops.set_phy_power(hw, false); ixgbe_release_hw_control(adapter); @@ -6305,6 +6419,7 @@ static void ixgbe_watchdog_link_is_up(struct ixgbe_adapter *adapter) struct net_device *upper; struct list_head *iter; u32 link_speed = adapter->link_speed; + const char *speed_str; bool flow_rx, flow_tx; /* only continue if link was previously down */ @@ -6342,14 +6457,24 @@ static void ixgbe_watchdog_link_is_up(struct ixgbe_adapter *adapter) if (test_bit(__IXGBE_PTP_RUNNING, &adapter->state)) ixgbe_ptp_start_cyclecounter(adapter); - e_info(drv, "NIC Link is Up %s, Flow Control: %s\n", - (link_speed == IXGBE_LINK_SPEED_10GB_FULL ? - "10 Gbps" : - (link_speed == IXGBE_LINK_SPEED_1GB_FULL ? - "1 Gbps" : - (link_speed == IXGBE_LINK_SPEED_100_FULL ? - "100 Mbps" : - "unknown speed"))), + switch (link_speed) { + case IXGBE_LINK_SPEED_10GB_FULL: + speed_str = "10 Gbps"; + break; + case IXGBE_LINK_SPEED_2_5GB_FULL: + speed_str = "2.5 Gbps"; + break; + case IXGBE_LINK_SPEED_1GB_FULL: + speed_str = "1 Gbps"; + break; + case IXGBE_LINK_SPEED_100_FULL: + speed_str = "100 Mbps"; + break; + default: + speed_str = "unknown speed"; + break; + } + e_info(drv, "NIC Link is Up %s, Flow Control: %s\n", speed_str, ((flow_rx && flow_tx) ? "RX/TX" : (flow_rx ? "RX" : (flow_tx ? "TX" : "None")))); @@ -6606,10 +6731,16 @@ static void ixgbe_sfp_detection_subtask(struct ixgbe_adapter *adapter) !(adapter->flags2 & IXGBE_FLAG2_SFP_NEEDS_RESET)) return; + if (adapter->sfp_poll_time && + time_after(adapter->sfp_poll_time, jiffies)) + return; /* If not yet time to poll for SFP */ + /* someone else is in init, wait until next service event */ if (test_and_set_bit(__IXGBE_IN_SFP_INIT, &adapter->state)) return; + adapter->sfp_poll_time = jiffies + IXGBE_SFP_POLL_JIFFIES - 1; + err = hw->phy.ops.identify_sfp(hw); if (err == IXGBE_ERR_SFP_NOT_SUPPORTED) goto sfp_out; @@ -6718,6 +6849,26 @@ static void ixgbe_service_timer(unsigned long data) ixgbe_service_event_schedule(adapter); } +static void ixgbe_phy_interrupt_subtask(struct ixgbe_adapter *adapter) +{ + struct ixgbe_hw *hw = &adapter->hw; + u32 status; + + if (!(adapter->flags2 & IXGBE_FLAG2_PHY_INTERRUPT)) + return; + + adapter->flags2 &= ~IXGBE_FLAG2_PHY_INTERRUPT; + + if (!hw->phy.ops.handle_lasi) + return; + + status = hw->phy.ops.handle_lasi(&adapter->hw); + if (status != IXGBE_ERR_OVERTEMP) + return; + + e_crit(drv, "%s\n", ixgbe_overheat_msg); +} + static void ixgbe_reset_subtask(struct ixgbe_adapter *adapter) { if (!(adapter->flags2 & IXGBE_FLAG2_RESET_REQUESTED)) @@ -6758,7 +6909,14 @@ static void ixgbe_service_task(struct work_struct *work) ixgbe_service_event_complete(adapter); return; } +#ifdef CONFIG_IXGBE_VXLAN + if (adapter->flags2 & IXGBE_FLAG2_VXLAN_REREG_NEEDED) { + adapter->flags2 &= ~IXGBE_FLAG2_VXLAN_REREG_NEEDED; + vxlan_get_rx_port(adapter->netdev); + } +#endif /* CONFIG_IXGBE_VXLAN */ ixgbe_reset_subtask(adapter); + ixgbe_phy_interrupt_subtask(adapter); ixgbe_sfp_detection_subtask(adapter); ixgbe_sfp_link_config_subtask(adapter); ixgbe_check_overtemp_subtask(adapter); @@ -6853,31 +7011,55 @@ static void ixgbe_tx_csum(struct ixgbe_ring *tx_ring, if (!(first->tx_flags & IXGBE_TX_FLAGS_HW_VLAN) && !(first->tx_flags & IXGBE_TX_FLAGS_CC)) return; + vlan_macip_lens = skb_network_offset(skb) << + IXGBE_ADVTXD_MACLEN_SHIFT; } else { u8 l4_hdr = 0; - switch (first->protocol) { - case htons(ETH_P_IP): - vlan_macip_lens |= skb_network_header_len(skb); + union { + struct iphdr *ipv4; + struct ipv6hdr *ipv6; + u8 *raw; + } network_hdr; + union { + struct tcphdr *tcphdr; + u8 *raw; + } transport_hdr; + + if (skb->encapsulation) { + network_hdr.raw = skb_inner_network_header(skb); + transport_hdr.raw = skb_inner_transport_header(skb); + vlan_macip_lens = skb_inner_network_offset(skb) << + IXGBE_ADVTXD_MACLEN_SHIFT; + } else { + network_hdr.raw = skb_network_header(skb); + transport_hdr.raw = skb_transport_header(skb); + vlan_macip_lens = skb_network_offset(skb) << + IXGBE_ADVTXD_MACLEN_SHIFT; + } + + /* use first 4 bits to determine IP version */ + switch (network_hdr.ipv4->version) { + case IPVERSION: + vlan_macip_lens |= transport_hdr.raw - network_hdr.raw; type_tucmd |= IXGBE_ADVTXD_TUCMD_IPV4; - l4_hdr = ip_hdr(skb)->protocol; + l4_hdr = network_hdr.ipv4->protocol; break; - case htons(ETH_P_IPV6): - vlan_macip_lens |= skb_network_header_len(skb); - l4_hdr = ipv6_hdr(skb)->nexthdr; + case 6: + vlan_macip_lens |= transport_hdr.raw - network_hdr.raw; + l4_hdr = network_hdr.ipv6->nexthdr; break; default: if (unlikely(net_ratelimit())) { dev_warn(tx_ring->dev, - "partial checksum but proto=%x!\n", - first->protocol); + "partial checksum but version=%d\n", + network_hdr.ipv4->version); } - break; } switch (l4_hdr) { case IPPROTO_TCP: type_tucmd |= IXGBE_ADVTXD_TUCMD_L4T_TCP; - mss_l4len_idx = tcp_hdrlen(skb) << + mss_l4len_idx = (transport_hdr.tcphdr->doff * 4) << IXGBE_ADVTXD_L4LEN_SHIFT; break; case IPPROTO_SCTP: @@ -6903,7 +7085,6 @@ static void ixgbe_tx_csum(struct ixgbe_ring *tx_ring, } /* vlan_macip_lens: MACLEN, VLAN tag */ - vlan_macip_lens |= skb_network_offset(skb) << IXGBE_ADVTXD_MACLEN_SHIFT; vlan_macip_lens |= first->tx_flags & IXGBE_TX_FLAGS_VLAN_MASK; ixgbe_tx_ctxtdesc(tx_ring, vlan_macip_lens, 0, @@ -7158,6 +7339,10 @@ static void ixgbe_atr(struct ixgbe_ring *ring, struct ipv6hdr *ipv6; } hdr; struct tcphdr *th; + struct sk_buff *skb; +#ifdef CONFIG_IXGBE_VXLAN + u8 encap = false; +#endif /* CONFIG_IXGBE_VXLAN */ __be16 vlan_id; /* if ring doesn't have a interrupt vector, cannot perform ATR */ @@ -7171,16 +7356,36 @@ static void ixgbe_atr(struct ixgbe_ring *ring, ring->atr_count++; /* snag network header to get L4 type and address */ - hdr.network = skb_network_header(first->skb); + skb = first->skb; + hdr.network = skb_network_header(skb); + if (skb->encapsulation) { +#ifdef CONFIG_IXGBE_VXLAN + struct ixgbe_adapter *adapter = q_vector->adapter; - /* Currently only IPv4/IPv6 with TCP is supported */ - if ((first->protocol != htons(ETH_P_IPV6) || - hdr.ipv6->nexthdr != IPPROTO_TCP) && - (first->protocol != htons(ETH_P_IP) || - hdr.ipv4->protocol != IPPROTO_TCP)) + if (!adapter->vxlan_port) + return; + if (first->protocol != htons(ETH_P_IP) || + hdr.ipv4->version != IPVERSION || + hdr.ipv4->protocol != IPPROTO_UDP) { + return; + } + if (ntohs(udp_hdr(skb)->dest) != adapter->vxlan_port) + return; + encap = true; + hdr.network = skb_inner_network_header(skb); + th = inner_tcp_hdr(skb); +#else return; - - th = tcp_hdr(first->skb); +#endif /* CONFIG_IXGBE_VXLAN */ + } else { + /* Currently only IPv4/IPv6 with TCP is supported */ + if ((first->protocol != htons(ETH_P_IPV6) || + hdr.ipv6->nexthdr != IPPROTO_TCP) && + (first->protocol != htons(ETH_P_IP) || + hdr.ipv4->protocol != IPPROTO_TCP)) + return; + th = tcp_hdr(skb); + } /* skip this packet since it is invalid or the socket is closing */ if (!th || th->fin) @@ -7229,6 +7434,11 @@ static void ixgbe_atr(struct ixgbe_ring *ring, hdr.ipv6->daddr.s6_addr32[3]; } +#ifdef CONFIG_IXGBE_VXLAN + if (encap) + input.formatted.flow_type |= IXGBE_ATR_L4TYPE_TUNNEL_MASK; +#endif /* CONFIG_IXGBE_VXLAN */ + /* This assumes the Rx queue and Tx queue are bound to the same CPU */ ixgbe_fdir_add_signature_filter_82599(&q_vector->adapter->hw, input, common, ring->queue_index); @@ -7694,9 +7904,10 @@ int ixgbe_setup_tc(struct net_device *dev, u8 tc) bool pools; /* Hardware supports up to 8 traffic classes */ - if (tc > adapter->dcb_cfg.num_tcs.pg_tcs || - (hw->mac.type == ixgbe_mac_82598EB && - tc < MAX_TRAFFIC_CLASS)) + if (tc > adapter->dcb_cfg.num_tcs.pg_tcs) + return -EINVAL; + + if (hw->mac.type == ixgbe_mac_82598EB && tc && tc < MAX_TRAFFIC_CLASS) return -EINVAL; pools = (find_first_zero_bit(&adapter->fwd_bitmask, 32) > 1); @@ -7709,6 +7920,9 @@ int ixgbe_setup_tc(struct net_device *dev, u8 tc) */ if (netif_running(dev)) ixgbe_close(dev); + else + ixgbe_reset(adapter); + ixgbe_clear_interrupt_scheme(adapter); #ifdef CONFIG_IXGBE_DCB @@ -7855,12 +8069,23 @@ static int ixgbe_set_features(struct net_device *netdev, need_reset = true; netdev->features = features; + +#ifdef CONFIG_IXGBE_VXLAN + if ((adapter->flags & IXGBE_FLAG_VXLAN_OFFLOAD_CAPABLE)) { + if (features & NETIF_F_RXCSUM) + adapter->flags2 |= IXGBE_FLAG2_VXLAN_REREG_NEEDED; + else + ixgbe_clear_vxlan_port(adapter); + } +#endif /* CONFIG_IXGBE_VXLAN */ + if (need_reset) ixgbe_do_reset(netdev); return 0; } +#ifdef CONFIG_IXGBE_VXLAN /** * ixgbe_add_vxlan_port - Get notifications about VXLAN ports that come up * @dev: The port's netdev @@ -7874,17 +8099,18 @@ static void ixgbe_add_vxlan_port(struct net_device *dev, sa_family_t sa_family, struct ixgbe_hw *hw = &adapter->hw; u16 new_port = ntohs(port); + if (!(adapter->flags & IXGBE_FLAG_VXLAN_OFFLOAD_CAPABLE)) + return; + if (sa_family == AF_INET6) return; - if (adapter->vxlan_port == new_port) { - netdev_info(dev, "Port %d already offloaded\n", new_port); + if (adapter->vxlan_port == new_port) return; - } if (adapter->vxlan_port) { netdev_info(dev, - "Hit Max num of UDP ports, not adding port %d\n", + "Hit Max num of VXLAN ports, not adding port %d\n", new_port); return; } @@ -7903,9 +8129,11 @@ static void ixgbe_del_vxlan_port(struct net_device *dev, sa_family_t sa_family, __be16 port) { struct ixgbe_adapter *adapter = netdev_priv(dev); - struct ixgbe_hw *hw = &adapter->hw; u16 new_port = ntohs(port); + if (!(adapter->flags & IXGBE_FLAG_VXLAN_OFFLOAD_CAPABLE)) + return; + if (sa_family == AF_INET6) return; @@ -7915,9 +8143,10 @@ static void ixgbe_del_vxlan_port(struct net_device *dev, sa_family_t sa_family, return; } - adapter->vxlan_port = 0; - IXGBE_WRITE_REG(hw, IXGBE_VXLANCTRL, 0); + ixgbe_clear_vxlan_port(adapter); + adapter->flags2 |= IXGBE_FLAG2_VXLAN_REREG_NEEDED; } +#endif /* CONFIG_IXGBE_VXLAN */ static int ixgbe_ndo_fdb_add(struct ndmsg *ndm, struct nlattr *tb[], struct net_device *dev, @@ -8022,7 +8251,7 @@ static int ixgbe_ndo_bridge_setlink(struct net_device *dev, return -EINVAL; nla_for_each_nested(attr, br_spec, rem) { - u32 status; + int status; __u16 mode; if (nla_type(attr) != IFLA_BRIDGE_MODE) @@ -8052,7 +8281,8 @@ static int ixgbe_ndo_bridge_getlink(struct sk_buff *skb, u32 pid, u32 seq, return 0; return ndo_dflt_bridge_getlink(skb, pid, seq, dev, - adapter->bridge_mode, 0, 0, nlflags); + adapter->bridge_mode, 0, 0, nlflags, + filter_mask, NULL); } static void *ixgbe_fwd_add(struct net_device *pdev, struct net_device *vdev) @@ -8091,7 +8321,7 @@ static void *ixgbe_fwd_add(struct net_device *pdev, struct net_device *vdev) (adapter->num_rx_pools > IXGBE_MAX_MACVLANS)) return ERR_PTR(-EBUSY); - fwd_adapter = kcalloc(1, sizeof(struct ixgbe_fwd_adapter), GFP_KERNEL); + fwd_adapter = kzalloc(sizeof(*fwd_adapter), GFP_KERNEL); if (!fwd_adapter) return ERR_PTR(-ENOMEM); @@ -8147,6 +8377,21 @@ static void ixgbe_fwd_del(struct net_device *pdev, void *priv) kfree(fwd_adapter); } +#define IXGBE_MAX_TUNNEL_HDR_LEN 80 +static netdev_features_t +ixgbe_features_check(struct sk_buff *skb, struct net_device *dev, + netdev_features_t features) +{ + if (!skb->encapsulation) + return features; + + if (unlikely(skb_inner_mac_header(skb) - skb_transport_header(skb) > + IXGBE_MAX_TUNNEL_HDR_LEN)) + return features & ~NETIF_F_ALL_CSUM; + + return features; +} + static const struct net_device_ops ixgbe_netdev_ops = { .ndo_open = ixgbe_open, .ndo_stop = ixgbe_close, @@ -8165,6 +8410,7 @@ static const struct net_device_ops ixgbe_netdev_ops = { .ndo_set_vf_rate = ixgbe_ndo_set_vf_bw, .ndo_set_vf_spoofchk = ixgbe_ndo_set_vf_spoofchk, .ndo_set_vf_rss_query_en = ixgbe_ndo_set_vf_rss_query_en, + .ndo_set_vf_trust = ixgbe_ndo_set_vf_trust, .ndo_get_vf_config = ixgbe_ndo_get_vf_config, .ndo_get_stats64 = ixgbe_get_stats64, #ifdef CONFIG_IXGBE_DCB @@ -8192,8 +8438,11 @@ static const struct net_device_ops ixgbe_netdev_ops = { .ndo_bridge_getlink = ixgbe_ndo_bridge_getlink, .ndo_dfwd_add_station = ixgbe_fwd_add, .ndo_dfwd_del_station = ixgbe_fwd_del, +#ifdef CONFIG_IXGBE_VXLAN .ndo_add_vxlan_port = ixgbe_add_vxlan_port, .ndo_del_vxlan_port = ixgbe_del_vxlan_port, +#endif /* CONFIG_IXGBE_VXLAN */ + .ndo_features_check = ixgbe_features_check, }; /** @@ -8291,6 +8540,10 @@ int ixgbe_wol_supported(struct ixgbe_adapter *adapter, u16 device_id, break; case IXGBE_DEV_ID_X540T: case IXGBE_DEV_ID_X540T1: + case IXGBE_DEV_ID_X550T: + case IXGBE_DEV_ID_X550EM_X_KX4: + case IXGBE_DEV_ID_X550EM_X_KR: + case IXGBE_DEV_ID_X550EM_X_10G_T: /* check eeprom to see if enabled wol */ if ((wol_cap == IXGBE_DEVICE_CAPS_WOL_PORT0_1) || ((wol_cap == IXGBE_DEVICE_CAPS_WOL_PORT0) && @@ -8431,10 +8684,11 @@ static int ixgbe_probe(struct pci_dev *pdev, const struct pci_device_id *ent) /* Setup hw api */ memcpy(&hw->mac.ops, ii->mac_ops, sizeof(hw->mac.ops)); hw->mac.type = ii->mac; + hw->mvals = ii->mvals; /* EEPROM */ memcpy(&hw->eeprom.ops, ii->eeprom_ops, sizeof(hw->eeprom.ops)); - eec = IXGBE_READ_REG(hw, IXGBE_EEC); + eec = IXGBE_READ_REG(hw, IXGBE_EEC(hw)); if (ixgbe_removed(hw->hw_addr)) { err = -EIO; goto err_ioremap; @@ -8490,8 +8744,7 @@ static int ixgbe_probe(struct pci_dev *pdev, const struct pci_device_id *ent) hw->phy.reset_if_overtemp = true; err = hw->mac.ops.reset_hw(hw); hw->phy.reset_if_overtemp = false; - if (err == IXGBE_ERR_SFP_NOT_PRESENT && - hw->mac.type == ixgbe_mac_82598EB) { + if (err == IXGBE_ERR_SFP_NOT_PRESENT) { err = 0; } else if (err == IXGBE_ERR_SFP_NOT_SUPPORTED) { e_dev_err("failed to load because an unsupported SFP+ or QSFP module type was detected.\n"); @@ -8548,17 +8801,24 @@ skip_sriov: netdev->vlan_features |= NETIF_F_IPV6_CSUM; netdev->vlan_features |= NETIF_F_SG; + netdev->hw_enc_features |= NETIF_F_SG | NETIF_F_IP_CSUM | + NETIF_F_IPV6_CSUM; + netdev->priv_flags |= IFF_UNICAST_FLT; netdev->priv_flags |= IFF_SUPP_NOFCS; +#ifdef CONFIG_IXGBE_VXLAN switch (adapter->hw.mac.type) { case ixgbe_mac_X550: case ixgbe_mac_X550EM_x: - netdev->hw_enc_features |= NETIF_F_RXCSUM; + netdev->hw_enc_features |= NETIF_F_RXCSUM | + NETIF_F_IP_CSUM | + NETIF_F_IPV6_CSUM; break; default: break; } +#endif /* CONFIG_IXGBE_VXLAN */ #ifdef CONFIG_IXGBE_DCB netdev->dcbnl_ops = &dcbnl_ops; @@ -8645,9 +8905,10 @@ skip_sriov: hw->eeprom.ops.read(hw, 0x2d, &adapter->eeprom_verl); /* pick up the PCI bus settings for reporting later */ - hw->mac.ops.get_bus_info(hw); if (ixgbe_pcie_from_parent(hw)) ixgbe_get_parent_bus_info(adapter); + else + hw->mac.ops.get_bus_info(hw); /* calculate the expected PCIe bandwidth required for optimal * performance. Note that some older parts will never have enough @@ -8795,7 +9056,8 @@ static void ixgbe_remove(struct pci_dev *pdev) if (adapter->flags & IXGBE_FLAG_DCA_ENABLED) { adapter->flags &= ~IXGBE_FLAG_DCA_ENABLED; dca_remove_requester(&pdev->dev); - IXGBE_WRITE_REG(&adapter->hw, IXGBE_DCA_CTRL, 1); + IXGBE_WRITE_REG(&adapter->hw, IXGBE_DCA_CTRL, + IXGBE_DCA_CTRL_DCA_DISABLE); } #endif @@ -8806,17 +9068,12 @@ static void ixgbe_remove(struct pci_dev *pdev) /* remove the added san mac */ ixgbe_del_sanmac_netdev(netdev); +#ifdef CONFIG_PCI_IOV + ixgbe_disable_sriov(adapter); +#endif if (netdev->reg_state == NETREG_REGISTERED) unregister_netdev(netdev); -#ifdef CONFIG_PCI_IOV - /* - * Only disable SR-IOV on unload if the user specified the now - * deprecated max_vfs module parameter. - */ - if (max_vfs) - ixgbe_disable_sriov(adapter); -#endif ixgbe_clear_interrupt_scheme(adapter); ixgbe_release_hw_control(adapter); diff --git a/kernel/drivers/net/ethernet/intel/ixgbe/ixgbe_mbx.h b/kernel/drivers/net/ethernet/intel/ixgbe/ixgbe_mbx.h index b1e4703ff..8daa95f74 100644 --- a/kernel/drivers/net/ethernet/intel/ixgbe/ixgbe_mbx.h +++ b/kernel/drivers/net/ethernet/intel/ixgbe/ixgbe_mbx.h @@ -102,6 +102,8 @@ enum ixgbe_pfvf_api_rev { #define IXGBE_VF_GET_RETA 0x0a /* VF request for RETA */ #define IXGBE_VF_GET_RSS_KEY 0x0b /* get RSS key */ +#define IXGBE_VF_UPDATE_XCAST_MODE 0x0c + /* length of permanent address message returned from PF */ #define IXGBE_VF_PERMADDR_MSG_LEN 4 /* word in permanent address message with the current multicast type */ diff --git a/kernel/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.c b/kernel/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.c index 8a2be4441..fb8673d63 100644 --- a/kernel/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.c +++ b/kernel/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.c @@ -100,16 +100,17 @@ static u8 ixgbe_ones_comp_byte_add(u8 add1, u8 add2) } /** - * ixgbe_read_i2c_combined_generic - Perform I2C read combined operation + * ixgbe_read_i2c_combined_generic_int - Perform I2C read combined operation * @hw: pointer to the hardware structure * @addr: I2C bus address to read from * @reg: I2C device register to read from * @val: pointer to location to receive read value + * @lock: true if to take and release semaphore * * Returns an error code on error. - **/ -s32 ixgbe_read_i2c_combined_generic(struct ixgbe_hw *hw, u8 addr, - u16 reg, u16 *val) + */ +static s32 ixgbe_read_i2c_combined_generic_int(struct ixgbe_hw *hw, u8 addr, + u16 reg, u16 *val, bool lock) { u32 swfw_mask = hw->phy.phy_semaphore_mask; int max_retry = 10; @@ -124,7 +125,7 @@ s32 ixgbe_read_i2c_combined_generic(struct ixgbe_hw *hw, u8 addr, csum = ixgbe_ones_comp_byte_add(reg_high, reg & 0xFF); csum = ~csum; do { - if (hw->mac.ops.acquire_swfw_sync(hw, swfw_mask)) + if (lock && hw->mac.ops.acquire_swfw_sync(hw, swfw_mask)) return IXGBE_ERR_SWFW_SYNC; ixgbe_i2c_start(hw); /* Device Address and write indication */ @@ -157,13 +158,15 @@ s32 ixgbe_read_i2c_combined_generic(struct ixgbe_hw *hw, u8 addr, if (ixgbe_clock_out_i2c_bit(hw, false)) goto fail; ixgbe_i2c_stop(hw); - hw->mac.ops.release_swfw_sync(hw, swfw_mask); + if (lock) + hw->mac.ops.release_swfw_sync(hw, swfw_mask); *val = (high_bits << 8) | low_bits; return 0; fail: ixgbe_i2c_bus_clear(hw); - hw->mac.ops.release_swfw_sync(hw, swfw_mask); + if (lock) + hw->mac.ops.release_swfw_sync(hw, swfw_mask); retry++; if (retry < max_retry) hw_dbg(hw, "I2C byte read combined error - Retry.\n"); @@ -175,17 +178,49 @@ fail: } /** - * ixgbe_write_i2c_combined_generic - Perform I2C write combined operation + * ixgbe_read_i2c_combined_generic - Perform I2C read combined operation + * @hw: pointer to the hardware structure + * @addr: I2C bus address to read from + * @reg: I2C device register to read from + * @val: pointer to location to receive read value + * + * Returns an error code on error. + */ +s32 ixgbe_read_i2c_combined_generic(struct ixgbe_hw *hw, u8 addr, + u16 reg, u16 *val) +{ + return ixgbe_read_i2c_combined_generic_int(hw, addr, reg, val, true); +} + +/** + * ixgbe_read_i2c_combined_generic_unlocked - Unlocked I2C read combined + * @hw: pointer to the hardware structure + * @addr: I2C bus address to read from + * @reg: I2C device register to read from + * @val: pointer to location to receive read value + * + * Returns an error code on error. + */ +s32 ixgbe_read_i2c_combined_generic_unlocked(struct ixgbe_hw *hw, u8 addr, + u16 reg, u16 *val) +{ + return ixgbe_read_i2c_combined_generic_int(hw, addr, reg, val, false); +} + +/** + * ixgbe_write_i2c_combined_generic_int - Perform I2C write combined operation * @hw: pointer to the hardware structure * @addr: I2C bus address to write to * @reg: I2C device register to write to * @val: value to write + * @lock: true if to take and release semaphore * * Returns an error code on error. - **/ -s32 ixgbe_write_i2c_combined_generic(struct ixgbe_hw *hw, - u8 addr, u16 reg, u16 val) + */ +static s32 ixgbe_write_i2c_combined_generic_int(struct ixgbe_hw *hw, u8 addr, + u16 reg, u16 val, bool lock) { + u32 swfw_mask = hw->phy.phy_semaphore_mask; int max_retry = 1; int retry = 0; u8 reg_high; @@ -197,6 +232,8 @@ s32 ixgbe_write_i2c_combined_generic(struct ixgbe_hw *hw, csum = ixgbe_ones_comp_byte_add(csum, val & 0xFF); csum = ~csum; do { + if (lock && hw->mac.ops.acquire_swfw_sync(hw, swfw_mask)) + return IXGBE_ERR_SWFW_SYNC; ixgbe_i2c_start(hw); /* Device Address and write indication */ if (ixgbe_out_i2c_byte_ack(hw, addr)) @@ -217,10 +254,14 @@ s32 ixgbe_write_i2c_combined_generic(struct ixgbe_hw *hw, if (ixgbe_out_i2c_byte_ack(hw, csum)) goto fail; ixgbe_i2c_stop(hw); + if (lock) + hw->mac.ops.release_swfw_sync(hw, swfw_mask); return 0; fail: ixgbe_i2c_bus_clear(hw); + if (lock) + hw->mac.ops.release_swfw_sync(hw, swfw_mask); retry++; if (retry < max_retry) hw_dbg(hw, "I2C byte write combined error - Retry.\n"); @@ -232,6 +273,36 @@ fail: } /** + * ixgbe_write_i2c_combined_generic - Perform I2C write combined operation + * @hw: pointer to the hardware structure + * @addr: I2C bus address to write to + * @reg: I2C device register to write to + * @val: value to write + * + * Returns an error code on error. + */ +s32 ixgbe_write_i2c_combined_generic(struct ixgbe_hw *hw, + u8 addr, u16 reg, u16 val) +{ + return ixgbe_write_i2c_combined_generic_int(hw, addr, reg, val, true); +} + +/** + * ixgbe_write_i2c_combined_generic_unlocked - Unlocked I2C write combined + * @hw: pointer to the hardware structure + * @addr: I2C bus address to write to + * @reg: I2C device register to write to + * @val: value to write + * + * Returns an error code on error. + */ +s32 ixgbe_write_i2c_combined_generic_unlocked(struct ixgbe_hw *hw, + u8 addr, u16 reg, u16 val) +{ + return ixgbe_write_i2c_combined_generic_int(hw, addr, reg, val, false); +} + +/** * ixgbe_identify_phy_generic - Get physical layer module * @hw: pointer to hardware structure * @@ -243,9 +314,7 @@ s32 ixgbe_identify_phy_generic(struct ixgbe_hw *hw) u16 ext_ability = 0; if (!hw->phy.phy_semaphore_mask) { - hw->phy.lan_id = IXGBE_READ_REG(hw, IXGBE_STATUS) & - IXGBE_STATUS_LAN_ID_1; - if (hw->phy.lan_id) + if (hw->bus.lan_id) hw->phy.phy_semaphore_mask = IXGBE_GSSR_PHY1_SM; else hw->phy.phy_semaphore_mask = IXGBE_GSSR_PHY0_SM; @@ -317,14 +386,14 @@ bool ixgbe_check_reset_blocked(struct ixgbe_hw *hw) **/ static s32 ixgbe_get_phy_id(struct ixgbe_hw *hw) { - u32 status; + s32 status; u16 phy_id_high = 0; u16 phy_id_low = 0; status = hw->phy.ops.read_reg(hw, MDIO_DEVID1, MDIO_MMD_PMAPMD, &phy_id_high); - if (status == 0) { + if (!status) { hw->phy.id = (u32)(phy_id_high << 16); status = hw->phy.ops.read_reg(hw, MDIO_DEVID2, MDIO_MMD_PMAPMD, &phy_id_low); @@ -347,6 +416,7 @@ static enum ixgbe_phy_type ixgbe_get_phy_type_from_id(u32 phy_id) case TN1010_PHY_ID: phy_type = ixgbe_phy_tn; break; + case X550_PHY_ID: case X540_PHY_ID: phy_type = ixgbe_phy_aq; break; @@ -356,6 +426,9 @@ static enum ixgbe_phy_type ixgbe_get_phy_type_from_id(u32 phy_id) case ATH_PHY_ID: phy_type = ixgbe_phy_nl; break; + case X557_PHY_ID: + phy_type = ixgbe_phy_x550em_ext_t; + break; default: phy_type = ixgbe_phy_unknown; break; @@ -604,12 +677,7 @@ s32 ixgbe_write_phy_reg_generic(struct ixgbe_hw *hw, u32 reg_addr, u32 device_type, u16 phy_data) { s32 status; - u32 gssr; - - if (IXGBE_READ_REG(hw, IXGBE_STATUS) & IXGBE_STATUS_LAN_ID_1) - gssr = IXGBE_GSSR_PHY1_SM; - else - gssr = IXGBE_GSSR_PHY0_SM; + u32 gssr = hw->phy.phy_semaphore_mask; if (hw->mac.ops.acquire_swfw_sync(hw, gssr) == 0) { status = ixgbe_write_phy_reg_mdi(hw, reg_addr, device_type, @@ -733,39 +801,61 @@ s32 ixgbe_setup_phy_link_speed_generic(struct ixgbe_hw *hw, } /** - * ixgbe_get_copper_link_capabilities_generic - Determines link capabilities + * ixgbe_get_copper_speeds_supported - Get copper link speed from phy * @hw: pointer to hardware structure - * @speed: pointer to link speed - * @autoneg: boolean auto-negotiation value * - * Determines the link capabilities by reading the AUTOC register. + * Determines the supported link capabilities by reading the PHY auto + * negotiation register. */ -s32 ixgbe_get_copper_link_capabilities_generic(struct ixgbe_hw *hw, - ixgbe_link_speed *speed, - bool *autoneg) +static s32 ixgbe_get_copper_speeds_supported(struct ixgbe_hw *hw) { - s32 status; u16 speed_ability; - - *speed = 0; - *autoneg = true; + s32 status; status = hw->phy.ops.read_reg(hw, MDIO_SPEED, MDIO_MMD_PMAPMD, &speed_ability); + if (status) + return status; - if (status == 0) { - if (speed_ability & MDIO_SPEED_10G) - *speed |= IXGBE_LINK_SPEED_10GB_FULL; - if (speed_ability & MDIO_PMA_SPEED_1000) - *speed |= IXGBE_LINK_SPEED_1GB_FULL; - if (speed_ability & MDIO_PMA_SPEED_100) - *speed |= IXGBE_LINK_SPEED_100_FULL; + if (speed_ability & MDIO_SPEED_10G) + hw->phy.speeds_supported |= IXGBE_LINK_SPEED_10GB_FULL; + if (speed_ability & MDIO_PMA_SPEED_1000) + hw->phy.speeds_supported |= IXGBE_LINK_SPEED_1GB_FULL; + if (speed_ability & MDIO_PMA_SPEED_100) + hw->phy.speeds_supported |= IXGBE_LINK_SPEED_100_FULL; + + switch (hw->mac.type) { + case ixgbe_mac_X550: + hw->phy.speeds_supported |= IXGBE_LINK_SPEED_2_5GB_FULL; + hw->phy.speeds_supported |= IXGBE_LINK_SPEED_5GB_FULL; + break; + case ixgbe_mac_X550EM_x: + hw->phy.speeds_supported &= ~IXGBE_LINK_SPEED_100_FULL; + break; + default: + break; } - /* Internal PHY does not support 100 Mbps */ - if (hw->mac.type == ixgbe_mac_X550EM_x) - *speed &= ~IXGBE_LINK_SPEED_100_FULL; + return 0; +} + +/** + * ixgbe_get_copper_link_capabilities_generic - Determines link capabilities + * @hw: pointer to hardware structure + * @speed: pointer to link speed + * @autoneg: boolean auto-negotiation value + */ +s32 ixgbe_get_copper_link_capabilities_generic(struct ixgbe_hw *hw, + ixgbe_link_speed *speed, + bool *autoneg) +{ + s32 status = 0; + + *autoneg = true; + if (!hw->phy.speeds_supported) + status = ixgbe_get_copper_speeds_supported(hw); + *speed = hw->phy.speeds_supported; return status; } @@ -1081,6 +1171,9 @@ s32 ixgbe_identify_sfp_module_generic(struct ixgbe_hw *hw) return IXGBE_ERR_SFP_NOT_PRESENT; } + /* LAN ID is needed for sfp_type determination */ + hw->mac.ops.set_lan_id(hw); + status = hw->phy.ops.read_i2c_eeprom(hw, IXGBE_SFF_IDENTIFIER, &identifier); @@ -1088,9 +1181,6 @@ s32 ixgbe_identify_sfp_module_generic(struct ixgbe_hw *hw) if (status) goto err_read_i2c_eeprom; - /* LAN ID is needed for sfp_type determination */ - hw->mac.ops.set_lan_id(hw); - if (identifier != IXGBE_SFF_IDENTIFIER_SFP) { hw->phy.type = ixgbe_phy_sfp_unsupported; return IXGBE_ERR_SFP_NOT_SUPPORTED; @@ -1140,7 +1230,7 @@ s32 ixgbe_identify_sfp_module_generic(struct ixgbe_hw *hw) hw->phy.sfp_type = ixgbe_sfp_type_lr; else hw->phy.sfp_type = ixgbe_sfp_type_unknown; - } else if (hw->mac.type == ixgbe_mac_82599EB) { + } else { if (cable_tech & IXGBE_SFF_DA_PASSIVE_CABLE) { if (hw->bus.lan_id == 0) hw->phy.sfp_type = @@ -1348,6 +1438,9 @@ static s32 ixgbe_identify_qsfp_module_generic(struct ixgbe_hw *hw) return IXGBE_ERR_SFP_NOT_PRESENT; } + /* LAN ID is needed for sfp_type determination */ + hw->mac.ops.set_lan_id(hw); + status = hw->phy.ops.read_i2c_eeprom(hw, IXGBE_SFF_IDENTIFIER, &identifier); @@ -1361,9 +1454,6 @@ static s32 ixgbe_identify_qsfp_module_generic(struct ixgbe_hw *hw) hw->phy.id = identifier; - /* LAN ID is needed for sfp_type determination */ - hw->mac.ops.set_lan_id(hw); - status = hw->phy.ops.read_i2c_eeprom(hw, IXGBE_SFF_QSFP_10GBE_COMP, &comp_codes_10g); @@ -1641,26 +1731,46 @@ s32 ixgbe_write_i2c_eeprom_generic(struct ixgbe_hw *hw, u8 byte_offset, } /** - * ixgbe_read_i2c_byte_generic - Reads 8 bit word over I2C + * ixgbe_is_sfp_probe - Returns true if SFP is being detected + * @hw: pointer to hardware structure + * @offset: eeprom offset to be read + * @addr: I2C address to be read + */ +static bool ixgbe_is_sfp_probe(struct ixgbe_hw *hw, u8 offset, u8 addr) +{ + if (addr == IXGBE_I2C_EEPROM_DEV_ADDR && + offset == IXGBE_SFF_IDENTIFIER && + hw->phy.sfp_type == ixgbe_sfp_type_not_present) + return true; + return false; +} + +/** + * ixgbe_read_i2c_byte_generic_int - Reads 8 bit word over I2C * @hw: pointer to hardware structure * @byte_offset: byte offset to read * @data: value read + * @lock: true if to take and release semaphore * * Performs byte read operation to SFP module's EEPROM over I2C interface at * a specified device address. - **/ -s32 ixgbe_read_i2c_byte_generic(struct ixgbe_hw *hw, u8 byte_offset, - u8 dev_addr, u8 *data) + */ +static s32 ixgbe_read_i2c_byte_generic_int(struct ixgbe_hw *hw, u8 byte_offset, + u8 dev_addr, u8 *data, bool lock) { s32 status; u32 max_retry = 10; u32 retry = 0; u32 swfw_mask = hw->phy.phy_semaphore_mask; bool nack = true; + + if (ixgbe_is_sfp_probe(hw, byte_offset, dev_addr)) + max_retry = IXGBE_SFP_DETECT_RETRIES; + *data = 0; do { - if (hw->mac.ops.acquire_swfw_sync(hw, swfw_mask)) + if (lock && hw->mac.ops.acquire_swfw_sync(hw, swfw_mask)) return IXGBE_ERR_SWFW_SYNC; ixgbe_i2c_start(hw); @@ -1702,12 +1812,16 @@ s32 ixgbe_read_i2c_byte_generic(struct ixgbe_hw *hw, u8 byte_offset, goto fail; ixgbe_i2c_stop(hw); - break; + if (lock) + hw->mac.ops.release_swfw_sync(hw, swfw_mask); + return 0; fail: ixgbe_i2c_bus_clear(hw); - hw->mac.ops.release_swfw_sync(hw, swfw_mask); - msleep(100); + if (lock) { + hw->mac.ops.release_swfw_sync(hw, swfw_mask); + msleep(100); + } retry++; if (retry < max_retry) hw_dbg(hw, "I2C byte read error - Retrying.\n"); @@ -1716,29 +1830,60 @@ fail: } while (retry < max_retry); - hw->mac.ops.release_swfw_sync(hw, swfw_mask); - return status; } /** - * ixgbe_write_i2c_byte_generic - Writes 8 bit word over I2C + * ixgbe_read_i2c_byte_generic - Reads 8 bit word over I2C + * @hw: pointer to hardware structure + * @byte_offset: byte offset to read + * @data: value read + * + * Performs byte read operation to SFP module's EEPROM over I2C interface at + * a specified device address. + */ +s32 ixgbe_read_i2c_byte_generic(struct ixgbe_hw *hw, u8 byte_offset, + u8 dev_addr, u8 *data) +{ + return ixgbe_read_i2c_byte_generic_int(hw, byte_offset, dev_addr, + data, true); +} + +/** + * ixgbe_read_i2c_byte_generic_unlocked - Reads 8 bit word over I2C + * @hw: pointer to hardware structure + * @byte_offset: byte offset to read + * @data: value read + * + * Performs byte read operation to SFP module's EEPROM over I2C interface at + * a specified device address. + */ +s32 ixgbe_read_i2c_byte_generic_unlocked(struct ixgbe_hw *hw, u8 byte_offset, + u8 dev_addr, u8 *data) +{ + return ixgbe_read_i2c_byte_generic_int(hw, byte_offset, dev_addr, + data, false); +} + +/** + * ixgbe_write_i2c_byte_generic_int - Writes 8 bit word over I2C * @hw: pointer to hardware structure * @byte_offset: byte offset to write * @data: value to write + * @lock: true if to take and release semaphore * * Performs byte write operation to SFP module's EEPROM over I2C interface at * a specified device address. - **/ -s32 ixgbe_write_i2c_byte_generic(struct ixgbe_hw *hw, u8 byte_offset, - u8 dev_addr, u8 data) + */ +static s32 ixgbe_write_i2c_byte_generic_int(struct ixgbe_hw *hw, u8 byte_offset, + u8 dev_addr, u8 data, bool lock) { s32 status; u32 max_retry = 1; u32 retry = 0; u32 swfw_mask = hw->phy.phy_semaphore_mask; - if (hw->mac.ops.acquire_swfw_sync(hw, swfw_mask)) + if (lock && hw->mac.ops.acquire_swfw_sync(hw, swfw_mask)) return IXGBE_ERR_SWFW_SYNC; do { @@ -1769,7 +1914,9 @@ s32 ixgbe_write_i2c_byte_generic(struct ixgbe_hw *hw, u8 byte_offset, goto fail; ixgbe_i2c_stop(hw); - break; + if (lock) + hw->mac.ops.release_swfw_sync(hw, swfw_mask); + return 0; fail: ixgbe_i2c_bus_clear(hw); @@ -1780,20 +1927,56 @@ fail: hw_dbg(hw, "I2C byte write error.\n"); } while (retry < max_retry); - hw->mac.ops.release_swfw_sync(hw, swfw_mask); + if (lock) + hw->mac.ops.release_swfw_sync(hw, swfw_mask); return status; } /** + * ixgbe_write_i2c_byte_generic - Writes 8 bit word over I2C + * @hw: pointer to hardware structure + * @byte_offset: byte offset to write + * @data: value to write + * + * Performs byte write operation to SFP module's EEPROM over I2C interface at + * a specified device address. + */ +s32 ixgbe_write_i2c_byte_generic(struct ixgbe_hw *hw, u8 byte_offset, + u8 dev_addr, u8 data) +{ + return ixgbe_write_i2c_byte_generic_int(hw, byte_offset, dev_addr, + data, true); +} + +/** + * ixgbe_write_i2c_byte_generic_unlocked - Writes 8 bit word over I2C + * @hw: pointer to hardware structure + * @byte_offset: byte offset to write + * @data: value to write + * + * Performs byte write operation to SFP module's EEPROM over I2C interface at + * a specified device address. + */ +s32 ixgbe_write_i2c_byte_generic_unlocked(struct ixgbe_hw *hw, u8 byte_offset, + u8 dev_addr, u8 data) +{ + return ixgbe_write_i2c_byte_generic_int(hw, byte_offset, dev_addr, + data, false); +} + +/** * ixgbe_i2c_start - Sets I2C start condition * @hw: pointer to hardware structure * * Sets I2C start condition (High -> Low on SDA while SCL is High) + * Set bit-bang mode on X550 hardware. **/ static void ixgbe_i2c_start(struct ixgbe_hw *hw) { - u32 i2cctl = IXGBE_READ_REG(hw, IXGBE_I2CCTL_BY_MAC(hw)); + u32 i2cctl = IXGBE_READ_REG(hw, IXGBE_I2CCTL(hw)); + + i2cctl |= IXGBE_I2C_BB_EN(hw); /* Start condition must begin with data and clock high */ ixgbe_set_i2c_data(hw, &i2cctl, 1); @@ -1819,10 +2002,15 @@ static void ixgbe_i2c_start(struct ixgbe_hw *hw) * @hw: pointer to hardware structure * * Sets I2C stop condition (Low -> High on SDA while SCL is High) + * Disables bit-bang mode and negates data output enable on X550 + * hardware. **/ static void ixgbe_i2c_stop(struct ixgbe_hw *hw) { - u32 i2cctl = IXGBE_READ_REG(hw, IXGBE_I2CCTL_BY_MAC(hw)); + u32 i2cctl = IXGBE_READ_REG(hw, IXGBE_I2CCTL(hw)); + u32 data_oe_bit = IXGBE_I2C_DATA_OE_N_EN(hw); + u32 clk_oe_bit = IXGBE_I2C_CLK_OE_N_EN(hw); + u32 bb_en_bit = IXGBE_I2C_BB_EN(hw); /* Stop condition must begin with data low and clock high */ ixgbe_set_i2c_data(hw, &i2cctl, 0); @@ -1835,6 +2023,13 @@ static void ixgbe_i2c_stop(struct ixgbe_hw *hw) /* bus free time between stop and start (4.7us)*/ udelay(IXGBE_I2C_T_BUF); + + if (bb_en_bit || data_oe_bit || clk_oe_bit) { + i2cctl &= ~bb_en_bit; + i2cctl |= data_oe_bit | clk_oe_bit; + IXGBE_WRITE_REG(hw, IXGBE_I2CCTL(hw), i2cctl); + IXGBE_WRITE_FLUSH(hw); + } } /** @@ -1849,6 +2044,7 @@ static s32 ixgbe_clock_in_i2c_byte(struct ixgbe_hw *hw, u8 *data) s32 i; bool bit = false; + *data = 0; for (i = 7; i >= 0; i--) { ixgbe_clock_in_i2c_bit(hw, &bit); *data |= bit << i; @@ -1880,9 +2076,10 @@ static s32 ixgbe_clock_out_i2c_byte(struct ixgbe_hw *hw, u8 data) } /* Release SDA line (set high) */ - i2cctl = IXGBE_READ_REG(hw, IXGBE_I2CCTL_BY_MAC(hw)); - i2cctl |= IXGBE_I2C_DATA_OUT_BY_MAC(hw); - IXGBE_WRITE_REG(hw, IXGBE_I2CCTL_BY_MAC(hw), i2cctl); + i2cctl = IXGBE_READ_REG(hw, IXGBE_I2CCTL(hw)); + i2cctl |= IXGBE_I2C_DATA_OUT(hw); + i2cctl |= IXGBE_I2C_DATA_OE_N_EN(hw); + IXGBE_WRITE_REG(hw, IXGBE_I2CCTL(hw), i2cctl); IXGBE_WRITE_FLUSH(hw); return status; @@ -1896,22 +2093,28 @@ static s32 ixgbe_clock_out_i2c_byte(struct ixgbe_hw *hw, u8 data) **/ static s32 ixgbe_get_i2c_ack(struct ixgbe_hw *hw) { + u32 data_oe_bit = IXGBE_I2C_DATA_OE_N_EN(hw); s32 status = 0; u32 i = 0; - u32 i2cctl = IXGBE_READ_REG(hw, IXGBE_I2CCTL_BY_MAC(hw)); + u32 i2cctl = IXGBE_READ_REG(hw, IXGBE_I2CCTL(hw)); u32 timeout = 10; bool ack = true; + if (data_oe_bit) { + i2cctl |= IXGBE_I2C_DATA_OUT(hw); + i2cctl |= data_oe_bit; + IXGBE_WRITE_REG(hw, IXGBE_I2CCTL(hw), i2cctl); + IXGBE_WRITE_FLUSH(hw); + } ixgbe_raise_i2c_clk(hw, &i2cctl); - /* Minimum high period of clock is 4us */ udelay(IXGBE_I2C_T_HIGH); /* Poll for ACK. Note that ACK in I2C spec is * transition from 1 to 0 */ for (i = 0; i < timeout; i++) { - i2cctl = IXGBE_READ_REG(hw, IXGBE_I2CCTL_BY_MAC(hw)); + i2cctl = IXGBE_READ_REG(hw, IXGBE_I2CCTL(hw)); ack = ixgbe_get_i2c_data(hw, &i2cctl); udelay(1); @@ -1941,14 +2144,21 @@ static s32 ixgbe_get_i2c_ack(struct ixgbe_hw *hw) **/ static s32 ixgbe_clock_in_i2c_bit(struct ixgbe_hw *hw, bool *data) { - u32 i2cctl = IXGBE_READ_REG(hw, IXGBE_I2CCTL_BY_MAC(hw)); + u32 i2cctl = IXGBE_READ_REG(hw, IXGBE_I2CCTL(hw)); + u32 data_oe_bit = IXGBE_I2C_DATA_OE_N_EN(hw); + if (data_oe_bit) { + i2cctl |= IXGBE_I2C_DATA_OUT(hw); + i2cctl |= data_oe_bit; + IXGBE_WRITE_REG(hw, IXGBE_I2CCTL(hw), i2cctl); + IXGBE_WRITE_FLUSH(hw); + } ixgbe_raise_i2c_clk(hw, &i2cctl); /* Minimum high period of clock is 4us */ udelay(IXGBE_I2C_T_HIGH); - i2cctl = IXGBE_READ_REG(hw, IXGBE_I2CCTL_BY_MAC(hw)); + i2cctl = IXGBE_READ_REG(hw, IXGBE_I2CCTL(hw)); *data = ixgbe_get_i2c_data(hw, &i2cctl); ixgbe_lower_i2c_clk(hw, &i2cctl); @@ -1969,7 +2179,7 @@ static s32 ixgbe_clock_in_i2c_bit(struct ixgbe_hw *hw, bool *data) static s32 ixgbe_clock_out_i2c_bit(struct ixgbe_hw *hw, bool data) { s32 status; - u32 i2cctl = IXGBE_READ_REG(hw, IXGBE_I2CCTL_BY_MAC(hw)); + u32 i2cctl = IXGBE_READ_REG(hw, IXGBE_I2CCTL(hw)); status = ixgbe_set_i2c_data(hw, &i2cctl, data); if (status == 0) { @@ -1997,22 +2207,29 @@ static s32 ixgbe_clock_out_i2c_bit(struct ixgbe_hw *hw, bool data) * @i2cctl: Current value of I2CCTL register * * Raises the I2C clock line '0'->'1' + * Negates the I2C clock output enable on X550 hardware. **/ static void ixgbe_raise_i2c_clk(struct ixgbe_hw *hw, u32 *i2cctl) { + u32 clk_oe_bit = IXGBE_I2C_CLK_OE_N_EN(hw); u32 i = 0; u32 timeout = IXGBE_I2C_CLOCK_STRETCHING_TIMEOUT; u32 i2cctl_r = 0; + if (clk_oe_bit) { + *i2cctl |= clk_oe_bit; + IXGBE_WRITE_REG(hw, IXGBE_I2CCTL(hw), *i2cctl); + } + for (i = 0; i < timeout; i++) { - *i2cctl |= IXGBE_I2C_CLK_OUT_BY_MAC(hw); - IXGBE_WRITE_REG(hw, IXGBE_I2CCTL_BY_MAC(hw), *i2cctl); + *i2cctl |= IXGBE_I2C_CLK_OUT(hw); + IXGBE_WRITE_REG(hw, IXGBE_I2CCTL(hw), *i2cctl); IXGBE_WRITE_FLUSH(hw); /* SCL rise time (1000ns) */ udelay(IXGBE_I2C_T_RISE); - i2cctl_r = IXGBE_READ_REG(hw, IXGBE_I2CCTL_BY_MAC(hw)); - if (i2cctl_r & IXGBE_I2C_CLK_IN_BY_MAC(hw)) + i2cctl_r = IXGBE_READ_REG(hw, IXGBE_I2CCTL(hw)); + if (i2cctl_r & IXGBE_I2C_CLK_IN(hw)) break; } } @@ -2023,13 +2240,15 @@ static void ixgbe_raise_i2c_clk(struct ixgbe_hw *hw, u32 *i2cctl) * @i2cctl: Current value of I2CCTL register * * Lowers the I2C clock line '1'->'0' + * Asserts the I2C clock output enable on X550 hardware. **/ static void ixgbe_lower_i2c_clk(struct ixgbe_hw *hw, u32 *i2cctl) { - *i2cctl &= ~IXGBE_I2C_CLK_OUT_BY_MAC(hw); + *i2cctl &= ~IXGBE_I2C_CLK_OUT(hw); + *i2cctl &= ~IXGBE_I2C_CLK_OE_N_EN(hw); - IXGBE_WRITE_REG(hw, IXGBE_I2CCTL_BY_MAC(hw), *i2cctl); + IXGBE_WRITE_REG(hw, IXGBE_I2CCTL(hw), *i2cctl); IXGBE_WRITE_FLUSH(hw); /* SCL fall time (300ns) */ @@ -2043,22 +2262,34 @@ static void ixgbe_lower_i2c_clk(struct ixgbe_hw *hw, u32 *i2cctl) * @data: I2C data value (0 or 1) to set * * Sets the I2C data bit + * Asserts the I2C data output enable on X550 hardware. **/ static s32 ixgbe_set_i2c_data(struct ixgbe_hw *hw, u32 *i2cctl, bool data) { + u32 data_oe_bit = IXGBE_I2C_DATA_OE_N_EN(hw); + if (data) - *i2cctl |= IXGBE_I2C_DATA_OUT_BY_MAC(hw); + *i2cctl |= IXGBE_I2C_DATA_OUT(hw); else - *i2cctl &= ~IXGBE_I2C_DATA_OUT_BY_MAC(hw); + *i2cctl &= ~IXGBE_I2C_DATA_OUT(hw); + *i2cctl &= ~data_oe_bit; - IXGBE_WRITE_REG(hw, IXGBE_I2CCTL_BY_MAC(hw), *i2cctl); + IXGBE_WRITE_REG(hw, IXGBE_I2CCTL(hw), *i2cctl); IXGBE_WRITE_FLUSH(hw); /* Data rise/fall (1000ns/300ns) and set-up time (250ns) */ udelay(IXGBE_I2C_T_RISE + IXGBE_I2C_T_FALL + IXGBE_I2C_T_SU_DATA); + if (!data) /* Can't verify data in this case */ + return 0; + if (data_oe_bit) { + *i2cctl |= data_oe_bit; + IXGBE_WRITE_REG(hw, IXGBE_I2CCTL(hw), *i2cctl); + IXGBE_WRITE_FLUSH(hw); + } + /* Verify data was set correctly */ - *i2cctl = IXGBE_READ_REG(hw, IXGBE_I2CCTL_BY_MAC(hw)); + *i2cctl = IXGBE_READ_REG(hw, IXGBE_I2CCTL(hw)); if (data != ixgbe_get_i2c_data(hw, i2cctl)) { hw_dbg(hw, "Error - I2C data was not set to %X.\n", data); return IXGBE_ERR_I2C; @@ -2073,10 +2304,20 @@ static s32 ixgbe_set_i2c_data(struct ixgbe_hw *hw, u32 *i2cctl, bool data) * @i2cctl: Current value of I2CCTL register * * Returns the I2C data bit value + * Negates the I2C data output enable on X550 hardware. **/ static bool ixgbe_get_i2c_data(struct ixgbe_hw *hw, u32 *i2cctl) { - if (*i2cctl & IXGBE_I2C_DATA_IN_BY_MAC(hw)) + u32 data_oe_bit = IXGBE_I2C_DATA_OE_N_EN(hw); + + if (data_oe_bit) { + *i2cctl |= data_oe_bit; + IXGBE_WRITE_REG(hw, IXGBE_I2CCTL(hw), *i2cctl); + IXGBE_WRITE_FLUSH(hw); + udelay(IXGBE_I2C_T_FALL); + } + + if (*i2cctl & IXGBE_I2C_DATA_IN(hw)) return true; return false; } @@ -2090,10 +2331,11 @@ static bool ixgbe_get_i2c_data(struct ixgbe_hw *hw, u32 *i2cctl) **/ static void ixgbe_i2c_bus_clear(struct ixgbe_hw *hw) { - u32 i2cctl = IXGBE_READ_REG(hw, IXGBE_I2CCTL_BY_MAC(hw)); + u32 i2cctl; u32 i; ixgbe_i2c_start(hw); + i2cctl = IXGBE_READ_REG(hw, IXGBE_I2CCTL(hw)); ixgbe_set_i2c_data(hw, &i2cctl, 1); @@ -2137,3 +2379,36 @@ s32 ixgbe_tn_check_overtemp(struct ixgbe_hw *hw) return IXGBE_ERR_OVERTEMP; } + +/** ixgbe_set_copper_phy_power - Control power for copper phy + * @hw: pointer to hardware structure + * @on: true for on, false for off + **/ +s32 ixgbe_set_copper_phy_power(struct ixgbe_hw *hw, bool on) +{ + u32 status; + u16 reg; + + /* Bail if we don't have copper phy */ + if (hw->mac.ops.get_media_type(hw) != ixgbe_media_type_copper) + return 0; + + status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_VENDOR_SPECIFIC_1_CONTROL, + IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE, + ®); + if (status) + return status; + + if (on) { + reg &= ~IXGBE_MDIO_PHY_SET_LOW_POWER_MODE; + } else { + if (ixgbe_check_reset_blocked(hw)) + return 0; + reg |= IXGBE_MDIO_PHY_SET_LOW_POWER_MODE; + } + + status = hw->phy.ops.write_reg(hw, IXGBE_MDIO_VENDOR_SPECIFIC_1_CONTROL, + IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE, + reg); + return status; +} diff --git a/kernel/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.h b/kernel/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.h index 434643881..5abd66c84 100644 --- a/kernel/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.h +++ b/kernel/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.h @@ -66,6 +66,9 @@ #define IXGBE_SFF_1GBASET_CAPABLE 0x8 #define IXGBE_SFF_10GBASESR_CAPABLE 0x10 #define IXGBE_SFF_10GBASELR_CAPABLE 0x20 +#define IXGBE_SFF_SOFT_RS_SELECT_MASK 0x8 +#define IXGBE_SFF_SOFT_RS_SELECT_10G 0x8 +#define IXGBE_SFF_SOFT_RS_SELECT_1G 0x0 #define IXGBE_SFF_ADDRESSING_MODE 0x4 #define IXGBE_SFF_QSFP_DA_ACTIVE_CABLE 0x1 #define IXGBE_SFF_QSFP_DA_PASSIVE_CABLE 0x8 @@ -78,9 +81,29 @@ #define IXGBE_I2C_EEPROM_STATUS_FAIL 0x2 #define IXGBE_I2C_EEPROM_STATUS_IN_PROGRESS 0x3 #define IXGBE_CS4227 0xBE /* CS4227 address */ -#define IXGBE_CS4227_SPARE24_LSB 0x12B0 /* Reg to program EDC */ +#define IXGBE_CS4227_SCRATCH 2 +#define IXGBE_CS4227_RESET_PENDING 0x1357 +#define IXGBE_CS4227_RESET_COMPLETE 0x5AA5 +#define IXGBE_CS4227_RETRIES 15 +#define IXGBE_CS4227_EFUSE_STATUS 0x0181 +#define IXGBE_CS4227_LINE_SPARE22_MSB 0x12AD /* Reg to set speed */ +#define IXGBE_CS4227_LINE_SPARE24_LSB 0x12B0 /* Reg to set EDC */ +#define IXGBE_CS4227_HOST_SPARE22_MSB 0x1AAD /* Reg to set speed */ +#define IXGBE_CS4227_HOST_SPARE24_LSB 0x1AB0 /* Reg to program EDC */ +#define IXGBE_CS4227_EEPROM_STATUS 0x5001 +#define IXGBE_CS4227_EEPROM_LOAD_OK 0x0001 +#define IXGBE_CS4227_SPEED_1G 0x8000 +#define IXGBE_CS4227_SPEED_10G 0 #define IXGBE_CS4227_EDC_MODE_CX1 0x0002 #define IXGBE_CS4227_EDC_MODE_SR 0x0004 +#define IXGBE_CS4227_EDC_MODE_DIAG 0x0008 +#define IXGBE_CS4227_RESET_HOLD 500 /* microseconds */ +#define IXGBE_CS4227_RESET_DELAY 500 /* milliseconds */ +#define IXGBE_CS4227_CHECK_DELAY 30 /* milliseconds */ +#define IXGBE_PE 0xE0 /* Port expander addr */ +#define IXGBE_PE_OUTPUT 1 /* Output reg offset */ +#define IXGBE_PE_CONFIG 3 /* Config reg offset */ +#define IXGBE_PE_BIT1 (1 << 1) /* Flow control defines */ #define IXGBE_TAF_SYM_PAUSE 0x400 @@ -109,6 +132,8 @@ #define IXGBE_I2C_T_SU_STO 4 #define IXGBE_I2C_T_BUF 5 +#define IXGBE_SFP_DETECT_RETRIES 2 + #define IXGBE_TN_LASI_STATUS_REG 0x9005 #define IXGBE_TN_LASI_STATUS_TEMP_ALARM 0x0008 @@ -145,6 +170,7 @@ s32 ixgbe_get_phy_firmware_version_generic(struct ixgbe_hw *hw, u16 *firmware_version); s32 ixgbe_reset_phy_nl(struct ixgbe_hw *hw); +s32 ixgbe_set_copper_phy_power(struct ixgbe_hw *hw, bool on); s32 ixgbe_identify_module_generic(struct ixgbe_hw *hw); s32 ixgbe_identify_sfp_module_generic(struct ixgbe_hw *hw); s32 ixgbe_get_sfp_init_sequence_offsets(struct ixgbe_hw *hw, @@ -153,8 +179,12 @@ s32 ixgbe_get_sfp_init_sequence_offsets(struct ixgbe_hw *hw, s32 ixgbe_tn_check_overtemp(struct ixgbe_hw *hw); s32 ixgbe_read_i2c_byte_generic(struct ixgbe_hw *hw, u8 byte_offset, u8 dev_addr, u8 *data); +s32 ixgbe_read_i2c_byte_generic_unlocked(struct ixgbe_hw *hw, u8 byte_offset, + u8 dev_addr, u8 *data); s32 ixgbe_write_i2c_byte_generic(struct ixgbe_hw *hw, u8 byte_offset, u8 dev_addr, u8 data); +s32 ixgbe_write_i2c_byte_generic_unlocked(struct ixgbe_hw *hw, u8 byte_offset, + u8 dev_addr, u8 data); s32 ixgbe_read_i2c_eeprom_generic(struct ixgbe_hw *hw, u8 byte_offset, u8 *eeprom_data); s32 ixgbe_read_i2c_sff8472_generic(struct ixgbe_hw *hw, u8 byte_offset, @@ -163,6 +193,10 @@ s32 ixgbe_write_i2c_eeprom_generic(struct ixgbe_hw *hw, u8 byte_offset, u8 eeprom_data); s32 ixgbe_read_i2c_combined_generic(struct ixgbe_hw *hw, u8 addr, u16 reg, u16 *val); +s32 ixgbe_read_i2c_combined_generic_unlocked(struct ixgbe_hw *hw, u8 addr, + u16 reg, u16 *val); s32 ixgbe_write_i2c_combined_generic(struct ixgbe_hw *hw, u8 addr, u16 reg, u16 val); +s32 ixgbe_write_i2c_combined_generic_unlocked(struct ixgbe_hw *hw, u8 addr, + u16 reg, u16 val); #endif /* _IXGBE_PHY_H_ */ diff --git a/kernel/drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.c b/kernel/drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.c index 1d17b5872..fcd8b27a0 100644 --- a/kernel/drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.c +++ b/kernel/drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.c @@ -116,6 +116,12 @@ static int __ixgbe_enable_sriov(struct ixgbe_adapter *adapter) * we want to disable the querying by default. */ adapter->vfinfo[i].rss_query_enabled = 0; + + /* Untrust all VFs */ + adapter->vfinfo[i].trusted = false; + + /* set the default xcast mode */ + adapter->vfinfo[i].xcast_mode = IXGBEVF_XCAST_MODE_NONE; } return 0; @@ -1001,6 +1007,59 @@ static int ixgbe_get_vf_rss_key(struct ixgbe_adapter *adapter, return 0; } +static int ixgbe_update_vf_xcast_mode(struct ixgbe_adapter *adapter, + u32 *msgbuf, u32 vf) +{ + struct ixgbe_hw *hw = &adapter->hw; + int xcast_mode = msgbuf[1]; + u32 vmolr, disable, enable; + + /* verify the PF is supporting the correct APIs */ + switch (adapter->vfinfo[vf].vf_api) { + case ixgbe_mbox_api_12: + break; + default: + return -EOPNOTSUPP; + } + + if (xcast_mode > IXGBEVF_XCAST_MODE_MULTI && + !adapter->vfinfo[vf].trusted) { + xcast_mode = IXGBEVF_XCAST_MODE_MULTI; + } + + if (adapter->vfinfo[vf].xcast_mode == xcast_mode) + goto out; + + switch (xcast_mode) { + case IXGBEVF_XCAST_MODE_NONE: + disable = IXGBE_VMOLR_BAM | IXGBE_VMOLR_ROMPE | IXGBE_VMOLR_MPE; + enable = 0; + break; + case IXGBEVF_XCAST_MODE_MULTI: + disable = IXGBE_VMOLR_MPE; + enable = IXGBE_VMOLR_BAM | IXGBE_VMOLR_ROMPE; + break; + case IXGBEVF_XCAST_MODE_ALLMULTI: + disable = 0; + enable = IXGBE_VMOLR_BAM | IXGBE_VMOLR_ROMPE | IXGBE_VMOLR_MPE; + break; + default: + return -EOPNOTSUPP; + } + + vmolr = IXGBE_READ_REG(hw, IXGBE_VMOLR(vf)); + vmolr &= ~disable; + vmolr |= enable; + IXGBE_WRITE_REG(hw, IXGBE_VMOLR(vf), vmolr); + + adapter->vfinfo[vf].xcast_mode = xcast_mode; + +out: + msgbuf[1] = xcast_mode; + + return 0; +} + static int ixgbe_rcv_msg_from_vf(struct ixgbe_adapter *adapter, u32 vf) { u32 mbx_size = IXGBE_VFMAILBOX_SIZE; @@ -1063,6 +1122,9 @@ static int ixgbe_rcv_msg_from_vf(struct ixgbe_adapter *adapter, u32 vf) case IXGBE_VF_GET_RSS_KEY: retval = ixgbe_get_vf_rss_key(adapter, msgbuf, vf); break; + case IXGBE_VF_UPDATE_XCAST_MODE: + retval = ixgbe_update_vf_xcast_mode(adapter, msgbuf, vf); + break; default: e_err(drv, "Unhandled Msg %8.8x\n", msgbuf[0]); retval = IXGBE_ERR_MBX; @@ -1124,6 +1186,17 @@ void ixgbe_disable_tx_rx(struct ixgbe_adapter *adapter) IXGBE_WRITE_REG(hw, IXGBE_VFRE(1), 0); } +static inline void ixgbe_ping_vf(struct ixgbe_adapter *adapter, int vf) +{ + struct ixgbe_hw *hw = &adapter->hw; + u32 ping; + + ping = IXGBE_PF_CONTROL_MSG; + if (adapter->vfinfo[vf].clear_to_send) + ping |= IXGBE_VT_MSGTYPE_CTS; + ixgbe_write_mbx(hw, &ping, 1, vf); +} + void ixgbe_ping_all_vfs(struct ixgbe_adapter *adapter) { struct ixgbe_hw *hw = &adapter->hw; @@ -1416,6 +1489,28 @@ int ixgbe_ndo_set_vf_rss_query_en(struct net_device *netdev, int vf, return 0; } +int ixgbe_ndo_set_vf_trust(struct net_device *netdev, int vf, bool setting) +{ + struct ixgbe_adapter *adapter = netdev_priv(netdev); + + if (vf >= adapter->num_vfs) + return -EINVAL; + + /* nothing to do */ + if (adapter->vfinfo[vf].trusted == setting) + return 0; + + adapter->vfinfo[vf].trusted = setting; + + /* reset VF to reconfigure features */ + adapter->vfinfo[vf].clear_to_send = false; + ixgbe_ping_vf(adapter, vf); + + e_info(drv, "VF %u is %strusted\n", vf, setting ? "" : "not "); + + return 0; +} + int ixgbe_ndo_get_vf_config(struct net_device *netdev, int vf, struct ifla_vf_info *ivi) { @@ -1430,5 +1525,6 @@ int ixgbe_ndo_get_vf_config(struct net_device *netdev, ivi->qos = adapter->vfinfo[vf].pf_qos; ivi->spoofchk = adapter->vfinfo[vf].spoofchk_enabled; ivi->rss_query_en = adapter->vfinfo[vf].rss_query_enabled; + ivi->trusted = adapter->vfinfo[vf].trusted; return 0; } diff --git a/kernel/drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.h b/kernel/drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.h index 2c197e6d1..dad925706 100644 --- a/kernel/drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.h +++ b/kernel/drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.h @@ -49,6 +49,7 @@ int ixgbe_ndo_set_vf_bw(struct net_device *netdev, int vf, int min_tx_rate, int ixgbe_ndo_set_vf_spoofchk(struct net_device *netdev, int vf, bool setting); int ixgbe_ndo_set_vf_rss_query_en(struct net_device *netdev, int vf, bool setting); +int ixgbe_ndo_set_vf_trust(struct net_device *netdev, int vf, bool setting); int ixgbe_ndo_get_vf_config(struct net_device *netdev, int vf, struct ifla_vf_info *ivi); void ixgbe_check_vf_rate_limit(struct ixgbe_adapter *adapter); diff --git a/kernel/drivers/net/ethernet/intel/ixgbe/ixgbe_type.h b/kernel/drivers/net/ethernet/intel/ixgbe/ixgbe_type.h index dd6ba5916..995f03107 100644 --- a/kernel/drivers/net/ethernet/intel/ixgbe/ixgbe_type.h +++ b/kernel/drivers/net/ethernet/intel/ixgbe/ixgbe_type.h @@ -1,7 +1,7 @@ /******************************************************************************* Intel 10 Gigabit PCI Express Linux driver - Copyright(c) 1999 - 2014 Intel Corporation. + Copyright(c) 1999 - 2015 Intel Corporation. This program is free software; you can redistribute it and/or modify it under the terms and conditions of the GNU General Public License, @@ -91,14 +91,24 @@ #define IXGBE_DEV_ID_X550_VF 0x1565 #define IXGBE_DEV_ID_X550EM_X_VF 0x15A8 +#define IXGBE_CAT(r, m) IXGBE_##r##_##m + +#define IXGBE_BY_MAC(_hw, r) ((_hw)->mvals[IXGBE_CAT(r, IDX)]) + /* General Registers */ #define IXGBE_CTRL 0x00000 #define IXGBE_STATUS 0x00008 #define IXGBE_CTRL_EXT 0x00018 #define IXGBE_ESDP 0x00020 #define IXGBE_EODSDP 0x00028 -#define IXGBE_I2CCTL_BY_MAC(_hw)((((_hw)->mac.type >= ixgbe_mac_X550) ? \ - 0x15F5C : 0x00028)) + +#define IXGBE_I2CCTL_8259X 0x00028 +#define IXGBE_I2CCTL_X540 IXGBE_I2CCTL_8259X +#define IXGBE_I2CCTL_X550 0x15F5C +#define IXGBE_I2CCTL_X550EM_x IXGBE_I2CCTL_X550 +#define IXGBE_I2CCTL_X550EM_a IXGBE_I2CCTL_X550 +#define IXGBE_I2CCTL(_hw) IXGBE_BY_MAC((_hw), I2CCTL) + #define IXGBE_LEDCTL 0x00200 #define IXGBE_FRTIMER 0x00048 #define IXGBE_TCPTIMER 0x0004C @@ -106,17 +116,39 @@ #define IXGBE_EXVET 0x05078 /* NVM Registers */ -#define IXGBE_EEC 0x10010 +#define IXGBE_EEC_8259X 0x10010 +#define IXGBE_EEC_X540 IXGBE_EEC_8259X +#define IXGBE_EEC_X550 IXGBE_EEC_8259X +#define IXGBE_EEC_X550EM_x IXGBE_EEC_8259X +#define IXGBE_EEC_X550EM_a 0x15FF8 +#define IXGBE_EEC(_hw) IXGBE_BY_MAC((_hw), EEC) #define IXGBE_EERD 0x10014 #define IXGBE_EEWR 0x10018 -#define IXGBE_FLA 0x1001C +#define IXGBE_FLA_8259X 0x1001C +#define IXGBE_FLA_X540 IXGBE_FLA_8259X +#define IXGBE_FLA_X550 IXGBE_FLA_8259X +#define IXGBE_FLA_X550EM_x IXGBE_FLA_8259X +#define IXGBE_FLA_X550EM_a 0x15F6C +#define IXGBE_FLA(_hw) IXGBE_BY_MAC((_hw), FLA) #define IXGBE_EEMNGCTL 0x10110 #define IXGBE_EEMNGDATA 0x10114 #define IXGBE_FLMNGCTL 0x10118 #define IXGBE_FLMNGDATA 0x1011C #define IXGBE_FLMNGCNT 0x10120 #define IXGBE_FLOP 0x1013C -#define IXGBE_GRC 0x10200 +#define IXGBE_GRC_8259X 0x10200 +#define IXGBE_GRC_X540 IXGBE_GRC_8259X +#define IXGBE_GRC_X550 IXGBE_GRC_8259X +#define IXGBE_GRC_X550EM_x IXGBE_GRC_8259X +#define IXGBE_GRC_X550EM_a 0x15F64 +#define IXGBE_GRC(_hw) IXGBE_BY_MAC((_hw), GRC) + +#define IXGBE_SRAMREL_8259X 0x10210 +#define IXGBE_SRAMREL_X540 IXGBE_SRAMREL_8259X +#define IXGBE_SRAMREL_X550 IXGBE_SRAMREL_8259X +#define IXGBE_SRAMREL_X550EM_x IXGBE_SRAMREL_8259X +#define IXGBE_SRAMREL_X550EM_a 0x15F6C +#define IXGBE_SRAMREL(_hw) IXGBE_BY_MAC((_hw), SRAMREL) /* General Receive Control */ #define IXGBE_GRC_MNG 0x00000001 /* Manageability Enable */ @@ -126,14 +158,55 @@ #define IXGBE_VPDDIAG1 0x10208 /* I2CCTL Bit Masks */ -#define IXGBE_I2C_CLK_IN_BY_MAC(_hw)(((_hw)->mac.type) >= ixgbe_mac_X550 ? \ - 0x00004000 : 0x00000001) -#define IXGBE_I2C_CLK_OUT_BY_MAC(_hw)(((_hw)->mac.type) >= ixgbe_mac_X550 ? \ - 0x00000200 : 0x00000002) -#define IXGBE_I2C_DATA_IN_BY_MAC(_hw)(((_hw)->mac.type) >= ixgbe_mac_X550 ? \ - 0x00001000 : 0x00000004) -#define IXGBE_I2C_DATA_OUT_BY_MAC(_hw)(((_hw)->mac.type) >= ixgbe_mac_X550 ? \ - 0x00000400 : 0x00000008) +#define IXGBE_I2C_CLK_IN_8259X 0x00000001 +#define IXGBE_I2C_CLK_IN_X540 IXGBE_I2C_CLK_IN_8259X +#define IXGBE_I2C_CLK_IN_X550 0x00004000 +#define IXGBE_I2C_CLK_IN_X550EM_x IXGBE_I2C_CLK_IN_X550 +#define IXGBE_I2C_CLK_IN_X550EM_a IXGBE_I2C_CLK_IN_X550 +#define IXGBE_I2C_CLK_IN(_hw) IXGBE_BY_MAC((_hw), I2C_CLK_IN) + +#define IXGBE_I2C_CLK_OUT_8259X 0x00000002 +#define IXGBE_I2C_CLK_OUT_X540 IXGBE_I2C_CLK_OUT_8259X +#define IXGBE_I2C_CLK_OUT_X550 0x00000200 +#define IXGBE_I2C_CLK_OUT_X550EM_x IXGBE_I2C_CLK_OUT_X550 +#define IXGBE_I2C_CLK_OUT_X550EM_a IXGBE_I2C_CLK_OUT_X550 +#define IXGBE_I2C_CLK_OUT(_hw) IXGBE_BY_MAC((_hw), I2C_CLK_OUT) + +#define IXGBE_I2C_DATA_IN_8259X 0x00000004 +#define IXGBE_I2C_DATA_IN_X540 IXGBE_I2C_DATA_IN_8259X +#define IXGBE_I2C_DATA_IN_X550 0x00001000 +#define IXGBE_I2C_DATA_IN_X550EM_x IXGBE_I2C_DATA_IN_X550 +#define IXGBE_I2C_DATA_IN_X550EM_a IXGBE_I2C_DATA_IN_X550 +#define IXGBE_I2C_DATA_IN(_hw) IXGBE_BY_MAC((_hw), I2C_DATA_IN) + +#define IXGBE_I2C_DATA_OUT_8259X 0x00000008 +#define IXGBE_I2C_DATA_OUT_X540 IXGBE_I2C_DATA_OUT_8259X +#define IXGBE_I2C_DATA_OUT_X550 0x00000400 +#define IXGBE_I2C_DATA_OUT_X550EM_x IXGBE_I2C_DATA_OUT_X550 +#define IXGBE_I2C_DATA_OUT_X550EM_a IXGBE_I2C_DATA_OUT_X550 +#define IXGBE_I2C_DATA_OUT(_hw) IXGBE_BY_MAC((_hw), I2C_DATA_OUT) + +#define IXGBE_I2C_DATA_OE_N_EN_8259X 0 +#define IXGBE_I2C_DATA_OE_N_EN_X540 IXGBE_I2C_DATA_OE_N_EN_8259X +#define IXGBE_I2C_DATA_OE_N_EN_X550 0x00000800 +#define IXGBE_I2C_DATA_OE_N_EN_X550EM_x IXGBE_I2C_DATA_OE_N_EN_X550 +#define IXGBE_I2C_DATA_OE_N_EN_X550EM_a IXGBE_I2C_DATA_OE_N_EN_X550 +#define IXGBE_I2C_DATA_OE_N_EN(_hw) IXGBE_BY_MAC((_hw), I2C_DATA_OE_N_EN) + +#define IXGBE_I2C_BB_EN_8259X 0 +#define IXGBE_I2C_BB_EN_X540 IXGBE_I2C_BB_EN_8259X +#define IXGBE_I2C_BB_EN_X550 0x00000100 +#define IXGBE_I2C_BB_EN_X550EM_x IXGBE_I2C_BB_EN_X550 +#define IXGBE_I2C_BB_EN_X550EM_a IXGBE_I2C_BB_EN_X550 +#define IXGBE_I2C_BB_EN(_hw) IXGBE_BY_MAC((_hw), I2C_BB_EN) + +#define IXGBE_I2C_CLK_OE_N_EN_8259X 0 +#define IXGBE_I2C_CLK_OE_N_EN_X540 IXGBE_I2C_CLK_OE_N_EN_8259X +#define IXGBE_I2C_CLK_OE_N_EN_X550 0x00002000 +#define IXGBE_I2C_CLK_OE_N_EN_X550EM_x IXGBE_I2C_CLK_OE_N_EN_X550 +#define IXGBE_I2C_CLK_OE_N_EN_X550EM_a IXGBE_I2C_CLK_OE_N_EN_X550 +#define IXGBE_I2C_CLK_OE_N_EN(_hw) IXGBE_BY_MAC((_hw), I2C_CLK_OE_N_EN) + #define IXGBE_I2C_CLOCK_STRETCHING_TIMEOUT 500 #define IXGBE_I2C_THERMAL_SENSOR_ADDR 0xF8 @@ -329,6 +402,7 @@ struct ixgbe_thermal_sensor_data { #define IXGBE_FDIRSIP4M 0x0EE40 #define IXGBE_FDIRTCPM 0x0EE44 #define IXGBE_FDIRUDPM 0x0EE48 +#define IXGBE_FDIRSCTPM 0x0EE78 #define IXGBE_FDIRIP6M 0x0EE74 #define IXGBE_FDIRM 0x0EE70 @@ -775,6 +849,7 @@ struct ixgbe_thermal_sensor_data { #define IXGBE_MDIO_AUTO_NEG_LINK_STATUS 0x4 /* Indicates if link is up */ #define IXGBE_MDIO_AUTO_NEG_VENDOR_STATUS_MASK 0x7 /* Speed/Duplex Mask */ +#define IXGBE_MDIO_AUTO_NEG_VEN_STAT_SPEED_MASK 0x6 /* Speed Mask */ #define IXGBE_MDIO_AUTO_NEG_VENDOR_STATUS_10M_HALF 0x0 /* 10Mb/s Half Duplex */ #define IXGBE_MDIO_AUTO_NEG_VENDOR_STATUS_10M_FULL 0x1 /* 10Mb/s Full Duplex */ #define IXGBE_MDIO_AUTO_NEG_VENDOR_STATUS_100M_HALF 0x2 /* 100Mb/s H Duplex */ @@ -783,6 +858,24 @@ struct ixgbe_thermal_sensor_data { #define IXGBE_MDIO_AUTO_NEG_VENDOR_STATUS_1GB_FULL 0x5 /* 1Gb/s Full Duplex */ #define IXGBE_MDIO_AUTO_NEG_VENDOR_STATUS_10GB_HALF 0x6 /* 10Gb/s Half Duplex */ #define IXGBE_MDIO_AUTO_NEG_VENDOR_STATUS_10GB_FULL 0x7 /* 10Gb/s Full Duplex */ +#define IXGBE_MDIO_AUTO_NEG_VENDOR_STATUS_1GB 0x4 /* 1Gb/s */ +#define IXGBE_MDIO_AUTO_NEG_VENDOR_STATUS_10GB 0x6 /* 10Gb/s */ + +#define IXGBE_MII_10GBASE_T_AUTONEG_CTRL_REG 0x20 /* 10G Control Reg */ +#define IXGBE_MII_AUTONEG_VENDOR_PROVISION_1_REG 0xC400 /* 1G Provisioning 1 */ +#define IXGBE_MII_AUTONEG_XNP_TX_REG 0x17 /* 1G XNP Transmit */ +#define IXGBE_MII_AUTONEG_ADVERTISE_REG 0x10 /* 100M Advertisement */ +#define IXGBE_MII_10GBASE_T_ADVERTISE 0x1000 /* full duplex, bit:12*/ +#define IXGBE_MII_1GBASE_T_ADVERTISE_XNP_TX 0x4000 /* full duplex, bit:14*/ +#define IXGBE_MII_1GBASE_T_ADVERTISE 0x8000 /* full duplex, bit:15*/ +#define IXGBE_MII_2_5GBASE_T_ADVERTISE 0x0400 +#define IXGBE_MII_5GBASE_T_ADVERTISE 0x0800 +#define IXGBE_MII_100BASE_T_ADVERTISE 0x0100 /* full duplex, bit:8 */ +#define IXGBE_MII_100BASE_T_ADVERTISE_HALF 0x0080 /* half duplex, bit:7 */ +#define IXGBE_MII_RESTART 0x200 +#define IXGBE_MII_AUTONEG_COMPLETE 0x20 +#define IXGBE_MII_AUTONEG_LINK_UP 0x04 +#define IXGBE_MII_AUTONEG_REG 0x0 /* Management */ #define IXGBE_MAVTV(_i) (0x05010 + ((_i) * 4)) /* 8 of these (0-7) */ @@ -835,15 +928,36 @@ struct ixgbe_thermal_sensor_data { #define IXGBE_GSCN_1 0x11024 #define IXGBE_GSCN_2 0x11028 #define IXGBE_GSCN_3 0x1102C -#define IXGBE_FACTPS 0x10150 +#define IXGBE_FACTPS_8259X 0x10150 +#define IXGBE_FACTPS_X540 IXGBE_FACTPS_8259X +#define IXGBE_FACTPS_X550 IXGBE_FACTPS_8259X +#define IXGBE_FACTPS_X550EM_x IXGBE_FACTPS_8259X +#define IXGBE_FACTPS_X550EM_a 0x15FEC +#define IXGBE_FACTPS(_hw) IXGBE_BY_MAC((_hw), FACTPS) + #define IXGBE_PCIEANACTL 0x11040 -#define IXGBE_SWSM 0x10140 -#define IXGBE_FWSM 0x10148 +#define IXGBE_SWSM_8259X 0x10140 +#define IXGBE_SWSM_X540 IXGBE_SWSM_8259X +#define IXGBE_SWSM_X550 IXGBE_SWSM_8259X +#define IXGBE_SWSM_X550EM_x IXGBE_SWSM_8259X +#define IXGBE_SWSM_X550EM_a 0x15F70 +#define IXGBE_SWSM(_hw) IXGBE_BY_MAC((_hw), SWSM) +#define IXGBE_FWSM_8259X 0x10148 +#define IXGBE_FWSM_X540 IXGBE_FWSM_8259X +#define IXGBE_FWSM_X550 IXGBE_FWSM_8259X +#define IXGBE_FWSM_X550EM_x IXGBE_FWSM_8259X +#define IXGBE_FWSM_X550EM_a 0x15F74 +#define IXGBE_FWSM(_hw) IXGBE_BY_MAC((_hw), FWSM) #define IXGBE_GSSR 0x10160 #define IXGBE_MREVID 0x11064 #define IXGBE_DCA_ID 0x11070 #define IXGBE_DCA_CTRL 0x11074 -#define IXGBE_SWFW_SYNC IXGBE_GSSR +#define IXGBE_SWFW_SYNC_8259X IXGBE_GSSR +#define IXGBE_SWFW_SYNC_X540 IXGBE_SWFW_SYNC_8259X +#define IXGBE_SWFW_SYNC_X550 IXGBE_SWFW_SYNC_8259X +#define IXGBE_SWFW_SYNC_X550EM_x IXGBE_SWFW_SYNC_8259X +#define IXGBE_SWFW_SYNC_X550EM_a 0x15F78 +#define IXGBE_SWFW_SYNC(_hw) IXGBE_BY_MAC((_hw), SWFW_SYNC) /* PCIe registers 82599-specific */ #define IXGBE_GCR_EXT 0x11050 @@ -855,14 +969,21 @@ struct ixgbe_thermal_sensor_data { #define IXGBE_PHYDAT_82599 0x11044 #define IXGBE_PHYCTL_82599 0x11048 #define IXGBE_PBACLR_82599 0x11068 -#define IXGBE_CIAA_82599 0x11088 -#define IXGBE_CIAD_82599 0x1108C -#define IXGBE_CIAA_X550 0x11508 -#define IXGBE_CIAD_X550 0x11510 -#define IXGBE_CIAA_BY_MAC(_hw) ((((_hw)->mac.type >= ixgbe_mac_X550) ? \ - IXGBE_CIAA_X550 : IXGBE_CIAA_82599)) -#define IXGBE_CIAD_BY_MAC(_hw) ((((_hw)->mac.type >= ixgbe_mac_X550) ? \ - IXGBE_CIAD_X550 : IXGBE_CIAD_82599)) + +#define IXGBE_CIAA_8259X 0x11088 +#define IXGBE_CIAA_X540 IXGBE_CIAA_8259X +#define IXGBE_CIAA_X550 0x11508 +#define IXGBE_CIAA_X550EM_x IXGBE_CIAA_X550 +#define IXGBE_CIAA_X550EM_a IXGBE_CIAA_X550 +#define IXGBE_CIAA(_hw) IXGBE_BY_MAC((_hw), CIAA) + +#define IXGBE_CIAD_8259X 0x1108C +#define IXGBE_CIAD_X540 IXGBE_CIAD_8259X +#define IXGBE_CIAD_X550 0x11510 +#define IXGBE_CIAD_X550EM_x IXGBE_CIAD_X550 +#define IXGBE_CIAD_X550EM_a IXGBE_CIAD_X550 +#define IXGBE_CIAD(_hw) IXGBE_BY_MAC((_hw), CIAD) + #define IXGBE_PICAUSE 0x110B0 #define IXGBE_PIENA 0x110B8 #define IXGBE_CDQ_MBR_82599 0x110B4 @@ -1072,6 +1193,7 @@ struct ixgbe_thermal_sensor_data { /* RDRXCTL Bit Masks */ #define IXGBE_RDRXCTL_RDMTS_1_2 0x00000000 /* Rx Desc Min Threshold Size */ #define IXGBE_RDRXCTL_CRCSTRIP 0x00000002 /* CRC Strip */ +#define IXGBE_RDRXCTL_PSP 0x00000004 /* Pad small packet */ #define IXGBE_RDRXCTL_MVMEN 0x00000020 #define IXGBE_RDRXCTL_DMAIDONE 0x00000008 /* DMA init cycle done */ #define IXGBE_RDRXCTL_AGGDIS 0x00010000 /* Aggregation disable */ @@ -1204,18 +1326,39 @@ struct ixgbe_thermal_sensor_data { #define IXGBE_MDIO_AUTO_NEG_CONTROL 0x0 /* AUTO_NEG Control Reg */ #define IXGBE_MDIO_AUTO_NEG_STATUS 0x1 /* AUTO_NEG Status Reg */ #define IXGBE_MDIO_AUTO_NEG_VENDOR_STAT 0xC800 /* AUTO_NEG Vendor Status Reg */ +#define IXGBE_MDIO_AUTO_NEG_VENDOR_TX_ALARM 0xCC00 /* AUTO_NEG Vendor TX Reg */ +#define IXGBE_MDIO_AUTO_NEG_VENDOR_TX_ALARM2 0xCC01 /* AUTO_NEG Vendor Tx Reg */ +#define IXGBE_MDIO_AUTO_NEG_VEN_LSC 0x1 /* AUTO_NEG Vendor Tx LSC */ #define IXGBE_MDIO_AUTO_NEG_ADVT 0x10 /* AUTO_NEG Advt Reg */ #define IXGBE_MDIO_AUTO_NEG_LP 0x13 /* AUTO_NEG LP Status Reg */ #define IXGBE_MDIO_AUTO_NEG_EEE_ADVT 0x3C /* AUTO_NEG EEE Advt Reg */ +#define IXGBE_MDIO_PHY_SET_LOW_POWER_MODE 0x0800 /* Set low power mode */ +#define IXGBE_AUTO_NEG_LP_STATUS 0xE820 /* AUTO NEG Rx LP Status Reg */ +#define IXGBE_AUTO_NEG_LP_1000BASE_CAP 0x8000 /* AUTO NEG Rx LP 1000BaseT */ #define IXGBE_MDIO_TX_VENDOR_ALARMS_3 0xCC02 /* Vendor Alarms 3 Reg */ #define IXGBE_MDIO_TX_VENDOR_ALARMS_3_RST_MASK 0x3 /* PHY Reset Complete Mask */ #define IXGBE_MDIO_GLOBAL_RES_PR_10 0xC479 /* Global Resv Provisioning 10 Reg */ #define IXGBE_MDIO_POWER_UP_STALL 0x8000 /* Power Up Stall */ +#define IXGBE_MDIO_GLOBAL_INT_CHIP_STD_MASK 0xFF00 /* int std mask */ +#define IXGBE_MDIO_GLOBAL_CHIP_STD_INT_FLAG 0xFC00 /* chip std int flag */ +#define IXGBE_MDIO_GLOBAL_INT_CHIP_VEN_MASK 0xFF01 /* int chip-wide mask */ +#define IXGBE_MDIO_GLOBAL_INT_CHIP_VEN_FLAG 0xFC01 /* int chip-wide mask */ +#define IXGBE_MDIO_GLOBAL_ALARM_1 0xCC00 /* Global alarm 1 */ +#define IXGBE_MDIO_GLOBAL_ALM_1_HI_TMP_FAIL 0x4000 /* high temp failure */ +#define IXGBE_MDIO_GLOBAL_INT_MASK 0xD400 /* Global int mask */ +/* autoneg vendor alarm int enable */ +#define IXGBE_MDIO_GLOBAL_AN_VEN_ALM_INT_EN 0x1000 +#define IXGBE_MDIO_GLOBAL_ALARM_1_INT 0x4 /* int in Global alarm 1 */ +#define IXGBE_MDIO_GLOBAL_VEN_ALM_INT_EN 0x1 /* vendor alarm int enable */ +#define IXGBE_MDIO_GLOBAL_STD_ALM2_INT 0x200 /* vendor alarm2 int mask */ +#define IXGBE_MDIO_GLOBAL_INT_HI_TEMP_EN 0x4000 /* int high temp enable */ #define IXGBE_MDIO_PMA_PMD_SDA_SCL_ADDR 0xC30A /* PHY_XS SDA/SCL Addr Reg */ #define IXGBE_MDIO_PMA_PMD_SDA_SCL_DATA 0xC30B /* PHY_XS SDA/SCL Data Reg */ #define IXGBE_MDIO_PMA_PMD_SDA_SCL_STAT 0xC30C /* PHY_XS SDA/SCL Stat Reg */ +#define IXGBE_MDIO_PMA_TX_VEN_LASI_INT_MASK 0xD401 /* PHY TX Vendor LASI */ +#define IXGBE_MDIO_PMA_TX_VEN_LASI_INT_EN 0x1 /* PHY TX Vendor LASI enable */ #define IXGBE_MDIO_PMD_STD_TX_DISABLE_CNTR 0x9 /* Standard Tx Dis Reg */ #define IXGBE_MDIO_PMD_GLOBAL_TX_DISABLE 0x0001 /* PMD Global Tx Dis */ @@ -1233,6 +1376,8 @@ struct ixgbe_thermal_sensor_data { #define TN1010_PHY_ID 0x00A19410 #define TNX_FW_REV 0xB #define X540_PHY_ID 0x01540200 +#define X550_PHY_ID 0x01540220 +#define X557_PHY_ID 0x01540240 #define QT2022_PHY_ID 0x0043A400 #define ATH_PHY_ID 0x03429050 #define AQ_FW_REV 0x20 @@ -1253,9 +1398,25 @@ struct ixgbe_thermal_sensor_data { #define IXGBE_CONTROL_SOL_NL 0x0000 /* General purpose Interrupt Enable */ -#define IXGBE_SDP0_GPIEN 0x00000001 /* SDP0 */ -#define IXGBE_SDP1_GPIEN 0x00000002 /* SDP1 */ -#define IXGBE_SDP2_GPIEN 0x00000004 /* SDP2 */ +#define IXGBE_SDP0_GPIEN_8259X 0x00000001 /* SDP0 */ +#define IXGBE_SDP1_GPIEN_8259X 0x00000002 /* SDP1 */ +#define IXGBE_SDP2_GPIEN_8259X 0x00000004 /* SDP2 */ +#define IXGBE_SDP0_GPIEN_X540 0x00000002 /* SDP0 on X540 and X550 */ +#define IXGBE_SDP1_GPIEN_X540 0x00000004 /* SDP1 on X540 and X550 */ +#define IXGBE_SDP2_GPIEN_X540 0x00000008 /* SDP2 on X540 and X550 */ +#define IXGBE_SDP0_GPIEN_X550 IXGBE_SDP0_GPIEN_X540 +#define IXGBE_SDP1_GPIEN_X550 IXGBE_SDP1_GPIEN_X540 +#define IXGBE_SDP2_GPIEN_X550 IXGBE_SDP2_GPIEN_X540 +#define IXGBE_SDP0_GPIEN_X550EM_x IXGBE_SDP0_GPIEN_X540 +#define IXGBE_SDP1_GPIEN_X550EM_x IXGBE_SDP1_GPIEN_X540 +#define IXGBE_SDP2_GPIEN_X550EM_x IXGBE_SDP2_GPIEN_X540 +#define IXGBE_SDP0_GPIEN_X550EM_a IXGBE_SDP0_GPIEN_X540 +#define IXGBE_SDP1_GPIEN_X550EM_a IXGBE_SDP1_GPIEN_X540 +#define IXGBE_SDP2_GPIEN_X550EM_a IXGBE_SDP2_GPIEN_X540 +#define IXGBE_SDP0_GPIEN(_hw) IXGBE_BY_MAC((_hw), SDP0_GPIEN) +#define IXGBE_SDP1_GPIEN(_hw) IXGBE_BY_MAC((_hw), SDP1_GPIEN) +#define IXGBE_SDP2_GPIEN(_hw) IXGBE_BY_MAC((_hw), SDP2_GPIEN) + #define IXGBE_GPIE_MSIX_MODE 0x00000010 /* MSI-X mode */ #define IXGBE_GPIE_OCD 0x00000020 /* Other Clear Disable */ #define IXGBE_GPIE_EIMEN 0x00000040 /* Immediate Interrupt Enable */ @@ -1417,9 +1578,25 @@ enum { #define IXGBE_EICR_MNG 0x00400000 /* Manageability Event Interrupt */ #define IXGBE_EICR_TS 0x00800000 /* Thermal Sensor Event */ #define IXGBE_EICR_TIMESYNC 0x01000000 /* Timesync Event */ -#define IXGBE_EICR_GPI_SDP0 0x01000000 /* Gen Purpose Interrupt on SDP0 */ -#define IXGBE_EICR_GPI_SDP1 0x02000000 /* Gen Purpose Interrupt on SDP1 */ -#define IXGBE_EICR_GPI_SDP2 0x04000000 /* Gen Purpose Interrupt on SDP2 */ +#define IXGBE_EICR_GPI_SDP0_8259X 0x01000000 /* Gen Purpose INT on SDP0 */ +#define IXGBE_EICR_GPI_SDP1_8259X 0x02000000 /* Gen Purpose INT on SDP1 */ +#define IXGBE_EICR_GPI_SDP2_8259X 0x04000000 /* Gen Purpose INT on SDP2 */ +#define IXGBE_EICR_GPI_SDP0_X540 0x02000000 +#define IXGBE_EICR_GPI_SDP1_X540 0x04000000 +#define IXGBE_EICR_GPI_SDP2_X540 0x08000000 +#define IXGBE_EICR_GPI_SDP0_X550 IXGBE_EICR_GPI_SDP0_X540 +#define IXGBE_EICR_GPI_SDP1_X550 IXGBE_EICR_GPI_SDP1_X540 +#define IXGBE_EICR_GPI_SDP2_X550 IXGBE_EICR_GPI_SDP2_X540 +#define IXGBE_EICR_GPI_SDP0_X550EM_x IXGBE_EICR_GPI_SDP0_X540 +#define IXGBE_EICR_GPI_SDP1_X550EM_x IXGBE_EICR_GPI_SDP1_X540 +#define IXGBE_EICR_GPI_SDP2_X550EM_x IXGBE_EICR_GPI_SDP2_X540 +#define IXGBE_EICR_GPI_SDP0_X550EM_a IXGBE_EICR_GPI_SDP0_X540 +#define IXGBE_EICR_GPI_SDP1_X550EM_a IXGBE_EICR_GPI_SDP1_X540 +#define IXGBE_EICR_GPI_SDP2_X550EM_a IXGBE_EICR_GPI_SDP2_X540 +#define IXGBE_EICR_GPI_SDP0(_hw) IXGBE_BY_MAC((_hw), EICR_GPI_SDP0) +#define IXGBE_EICR_GPI_SDP1(_hw) IXGBE_BY_MAC((_hw), EICR_GPI_SDP1) +#define IXGBE_EICR_GPI_SDP2(_hw) IXGBE_BY_MAC((_hw), EICR_GPI_SDP2) + #define IXGBE_EICR_ECC 0x10000000 /* ECC Error */ #define IXGBE_EICR_PBUR 0x10000000 /* Packet Buffer Handler Error */ #define IXGBE_EICR_DHER 0x20000000 /* Descriptor Handler Error */ @@ -1435,9 +1612,9 @@ enum { #define IXGBE_EICS_LSC IXGBE_EICR_LSC /* Link Status Change */ #define IXGBE_EICS_MNG IXGBE_EICR_MNG /* MNG Event Interrupt */ #define IXGBE_EICS_TIMESYNC IXGBE_EICR_TIMESYNC /* Timesync Event */ -#define IXGBE_EICS_GPI_SDP0 IXGBE_EICR_GPI_SDP0 /* SDP0 Gen Purpose Int */ -#define IXGBE_EICS_GPI_SDP1 IXGBE_EICR_GPI_SDP1 /* SDP1 Gen Purpose Int */ -#define IXGBE_EICS_GPI_SDP2 IXGBE_EICR_GPI_SDP2 /* SDP2 Gen Purpose Int */ +#define IXGBE_EICS_GPI_SDP0(_hw) IXGBE_EICR_GPI_SDP0(_hw) +#define IXGBE_EICS_GPI_SDP1(_hw) IXGBE_EICR_GPI_SDP1(_hw) +#define IXGBE_EICS_GPI_SDP2(_hw) IXGBE_EICR_GPI_SDP2(_hw) #define IXGBE_EICS_ECC IXGBE_EICR_ECC /* ECC Error */ #define IXGBE_EICS_PBUR IXGBE_EICR_PBUR /* Pkt Buf Handler Err */ #define IXGBE_EICS_DHER IXGBE_EICR_DHER /* Desc Handler Error */ @@ -1454,9 +1631,9 @@ enum { #define IXGBE_EIMS_MNG IXGBE_EICR_MNG /* MNG Event Interrupt */ #define IXGBE_EIMS_TS IXGBE_EICR_TS /* Thermel Sensor Event */ #define IXGBE_EIMS_TIMESYNC IXGBE_EICR_TIMESYNC /* Timesync Event */ -#define IXGBE_EIMS_GPI_SDP0 IXGBE_EICR_GPI_SDP0 /* SDP0 Gen Purpose Int */ -#define IXGBE_EIMS_GPI_SDP1 IXGBE_EICR_GPI_SDP1 /* SDP1 Gen Purpose Int */ -#define IXGBE_EIMS_GPI_SDP2 IXGBE_EICR_GPI_SDP2 /* SDP2 Gen Purpose Int */ +#define IXGBE_EIMS_GPI_SDP0(_hw) IXGBE_EICR_GPI_SDP0(_hw) +#define IXGBE_EIMS_GPI_SDP1(_hw) IXGBE_EICR_GPI_SDP1(_hw) +#define IXGBE_EIMS_GPI_SDP2(_hw) IXGBE_EICR_GPI_SDP2(_hw) #define IXGBE_EIMS_ECC IXGBE_EICR_ECC /* ECC Error */ #define IXGBE_EIMS_PBUR IXGBE_EICR_PBUR /* Pkt Buf Handler Err */ #define IXGBE_EIMS_DHER IXGBE_EICR_DHER /* Descr Handler Error */ @@ -1472,9 +1649,9 @@ enum { #define IXGBE_EIMC_LSC IXGBE_EICR_LSC /* Link Status Change */ #define IXGBE_EIMC_MNG IXGBE_EICR_MNG /* MNG Event Interrupt */ #define IXGBE_EIMC_TIMESYNC IXGBE_EICR_TIMESYNC /* Timesync Event */ -#define IXGBE_EIMC_GPI_SDP0 IXGBE_EICR_GPI_SDP0 /* SDP0 Gen Purpose Int */ -#define IXGBE_EIMC_GPI_SDP1 IXGBE_EICR_GPI_SDP1 /* SDP1 Gen Purpose Int */ -#define IXGBE_EIMC_GPI_SDP2 IXGBE_EICR_GPI_SDP2 /* SDP2 Gen Purpose Int */ +#define IXGBE_EIMC_GPI_SDP0(_hw) IXGBE_EICR_GPI_SDP0(_hw) +#define IXGBE_EIMC_GPI_SDP1(_hw) IXGBE_EICR_GPI_SDP1(_hw) +#define IXGBE_EIMC_GPI_SDP2(_hw) IXGBE_EICR_GPI_SDP2(_hw) #define IXGBE_EIMC_ECC IXGBE_EICR_ECC /* ECC Error */ #define IXGBE_EIMC_PBUR IXGBE_EICR_PBUR /* Pkt Buf Handler Err */ #define IXGBE_EIMC_DHER IXGBE_EICR_DHER /* Desc Handler Err */ @@ -1575,6 +1752,9 @@ enum { * FCoE (0x8906): Filter 2 * 1588 (0x88f7): Filter 3 * FIP (0x8914): Filter 4 + * LLDP (0x88CC): Filter 5 + * LACP (0x8809): Filter 6 + * FC (0x8808): Filter 7 */ #define IXGBE_ETQF_FILTER_EAPOL 0 #define IXGBE_ETQF_FILTER_FCOE 2 @@ -1582,6 +1762,7 @@ enum { #define IXGBE_ETQF_FILTER_FIP 4 #define IXGBE_ETQF_FILTER_LLDP 5 #define IXGBE_ETQF_FILTER_LACP 6 +#define IXGBE_ETQF_FILTER_FC 7 /* VLAN Control Bit Masks */ #define IXGBE_VLNCTRL_VET 0x0000FFFF /* bits 0-15 */ @@ -1773,6 +1954,7 @@ enum { #define IXGBE_GSSR_SW_MNG_SM 0x0400 #define IXGBE_GSSR_SHARED_I2C_SM 0x1806 /* Wait for both phys & I2Cs */ #define IXGBE_GSSR_I2C_MASK 0x1800 +#define IXGBE_GSSR_NVM_PHY_MASK 0xF /* FW Status register bitmask */ #define IXGBE_FWSTS_FWRI 0x00000200 /* Firmware Reset Indication */ @@ -1887,6 +2069,11 @@ enum { #define IXGBE_NVM_POLL_WRITE 1 /* Flag for polling for write complete */ #define IXGBE_NVM_POLL_READ 0 /* Flag for polling for read complete */ +#define NVM_INIT_CTRL_3 0x38 +#define NVM_INIT_CTRL_3_LPLU 0x8 +#define NVM_INIT_CTRL_3_D10GMP_PORT0 0x40 +#define NVM_INIT_CTRL_3_D10GMP_PORT1 0x100 + #define IXGBE_EEPROM_PAGE_SIZE_MAX 128 #define IXGBE_EEPROM_RD_BUFFER_MAX_COUNT 512 /* EEPROM words # read in burst */ #define IXGBE_EEPROM_WR_BUFFER_MAX_COUNT 256 /* EEPROM words # wr in burst */ @@ -2386,9 +2573,11 @@ enum ixgbe_fdir_pballoc_type { #define IXGBE_FDIRCMD_QUEUE_EN 0x00008000 #define IXGBE_FDIRCMD_FLOW_TYPE_SHIFT 5 #define IXGBE_FDIRCMD_RX_QUEUE_SHIFT 16 +#define IXGBE_FDIRCMD_RX_TUNNEL_FILTER_SHIFT 23 #define IXGBE_FDIRCMD_VT_POOL_SHIFT 24 #define IXGBE_FDIR_INIT_DONE_POLL 10 #define IXGBE_FDIRCMD_CMD_POLL 10 +#define IXGBE_FDIRCMD_TUNNEL_FILTER 0x00800000 #define IXGBE_FDIR_DROP_QUEUE 127 @@ -2679,12 +2868,13 @@ typedef u32 ixgbe_link_speed; #define IXGBE_ATR_SIGNATURE_HASH_KEY 0x174D3614 /* Software ATR input stream values and masks */ -#define IXGBE_ATR_HASH_MASK 0x7fff -#define IXGBE_ATR_L4TYPE_MASK 0x3 -#define IXGBE_ATR_L4TYPE_UDP 0x1 -#define IXGBE_ATR_L4TYPE_TCP 0x2 -#define IXGBE_ATR_L4TYPE_SCTP 0x3 -#define IXGBE_ATR_L4TYPE_IPV6_MASK 0x4 +#define IXGBE_ATR_HASH_MASK 0x7fff +#define IXGBE_ATR_L4TYPE_MASK 0x3 +#define IXGBE_ATR_L4TYPE_UDP 0x1 +#define IXGBE_ATR_L4TYPE_TCP 0x2 +#define IXGBE_ATR_L4TYPE_SCTP 0x3 +#define IXGBE_ATR_L4TYPE_IPV6_MASK 0x4 +#define IXGBE_ATR_L4TYPE_TUNNEL_MASK 0x10 enum ixgbe_atr_flow_type { IXGBE_ATR_FLOW_TYPE_IPV4 = 0x0, IXGBE_ATR_FLOW_TYPE_UDPV4 = 0x1, @@ -2741,6 +2931,37 @@ union ixgbe_atr_hash_dword { __be32 dword; }; +#define IXGBE_MVALS_INIT(m) \ + IXGBE_CAT(EEC, m), \ + IXGBE_CAT(FLA, m), \ + IXGBE_CAT(GRC, m), \ + IXGBE_CAT(SRAMREL, m), \ + IXGBE_CAT(FACTPS, m), \ + IXGBE_CAT(SWSM, m), \ + IXGBE_CAT(SWFW_SYNC, m), \ + IXGBE_CAT(FWSM, m), \ + IXGBE_CAT(SDP0_GPIEN, m), \ + IXGBE_CAT(SDP1_GPIEN, m), \ + IXGBE_CAT(SDP2_GPIEN, m), \ + IXGBE_CAT(EICR_GPI_SDP0, m), \ + IXGBE_CAT(EICR_GPI_SDP1, m), \ + IXGBE_CAT(EICR_GPI_SDP2, m), \ + IXGBE_CAT(CIAA, m), \ + IXGBE_CAT(CIAD, m), \ + IXGBE_CAT(I2C_CLK_IN, m), \ + IXGBE_CAT(I2C_CLK_OUT, m), \ + IXGBE_CAT(I2C_DATA_IN, m), \ + IXGBE_CAT(I2C_DATA_OUT, m), \ + IXGBE_CAT(I2C_DATA_OE_N_EN, m), \ + IXGBE_CAT(I2C_BB_EN, m), \ + IXGBE_CAT(I2C_CLK_OE_N_EN, m), \ + IXGBE_CAT(I2CCTL, m) + +enum ixgbe_mvals { + IXGBE_MVALS_INIT(IDX), + IXGBE_MVALS_IDX_LIMIT +}; + enum ixgbe_eeprom_type { ixgbe_eeprom_uninitialized = 0, ixgbe_eeprom_spi, @@ -2850,9 +3071,8 @@ enum ixgbe_smart_speed { /* PCI bus types */ enum ixgbe_bus_type { ixgbe_bus_type_unknown = 0, - ixgbe_bus_type_pci, - ixgbe_bus_type_pcix, ixgbe_bus_type_pci_express, + ixgbe_bus_type_internal, ixgbe_bus_type_reserved }; @@ -3042,9 +3262,11 @@ struct ixgbe_mac_operations { void (*flap_tx_laser)(struct ixgbe_hw *); void (*stop_link_on_d3)(struct ixgbe_hw *); s32 (*setup_link)(struct ixgbe_hw *, ixgbe_link_speed, bool); + s32 (*setup_mac_link)(struct ixgbe_hw *, ixgbe_link_speed, bool); s32 (*check_link)(struct ixgbe_hw *, ixgbe_link_speed *, bool *, bool); s32 (*get_link_capabilities)(struct ixgbe_hw *, ixgbe_link_speed *, bool *); + void (*set_rate_select_speed)(struct ixgbe_hw *, ixgbe_link_speed); /* Packet Buffer Manipulation */ void (*set_rxpba)(struct ixgbe_hw *, int, u32, int); @@ -3112,6 +3334,13 @@ struct ixgbe_phy_operations { s32 (*read_i2c_combined)(struct ixgbe_hw *, u8 addr, u16 reg, u16 *val); s32 (*write_i2c_combined)(struct ixgbe_hw *, u8 addr, u16 reg, u16 val); s32 (*check_overtemp)(struct ixgbe_hw *); + s32 (*set_phy_power)(struct ixgbe_hw *, bool on); + s32 (*enter_lplu)(struct ixgbe_hw *); + s32 (*handle_lasi)(struct ixgbe_hw *hw); + s32 (*read_i2c_combined_unlocked)(struct ixgbe_hw *, u8 addr, u16 reg, + u16 *value); + s32 (*write_i2c_combined_unlocked)(struct ixgbe_hw *, u8 addr, u16 reg, + u16 value); }; struct ixgbe_eeprom_info { @@ -3121,6 +3350,7 @@ struct ixgbe_eeprom_info { u16 word_size; u16 address_bits; u16 word_page_size; + u16 ctrl_word_3; }; #define IXGBE_FLAGS_DOUBLE_RESET_REQUIRED 0x01 @@ -3164,15 +3394,16 @@ struct ixgbe_phy_info { bool sfp_setup_needed; u32 revision; enum ixgbe_media_type media_type; - u8 lan_id; u32 phy_semaphore_mask; bool reset_disable; ixgbe_autoneg_advertised autoneg_advertised; + ixgbe_link_speed speeds_supported; enum ixgbe_smart_speed smart_speed; bool smart_speed_active; bool multispeed_fiber; bool reset_if_overtemp; bool qsfp_shared_i2c_bus; + u32 nw_mng_if_sel; }; #include "ixgbe_mbx.h" @@ -3216,6 +3447,7 @@ struct ixgbe_hw { struct ixgbe_eeprom_info eeprom; struct ixgbe_bus_info bus; struct ixgbe_mbx_info mbx; + const u32 *mvals; u16 device_id; u16 vendor_id; u16 subsystem_device_id; @@ -3234,6 +3466,7 @@ struct ixgbe_info { struct ixgbe_eeprom_operations *eeprom_ops; struct ixgbe_phy_operations *phy_ops; struct ixgbe_mbx_operations *mbx_ops; + const u32 *mvals; }; @@ -3270,16 +3503,21 @@ struct ixgbe_info { #define IXGBE_ERR_PBA_SECTION -31 #define IXGBE_ERR_INVALID_ARGUMENT -32 #define IXGBE_ERR_HOST_INTERFACE_COMMAND -33 +#define IXGBE_ERR_FDIR_CMD_INCOMPLETE -38 #define IXGBE_NOT_IMPLEMENTED 0x7FFFFFFF -#define IXGBE_KRM_PORT_CAR_GEN_CTRL(P) ((P == 0) ? (0x4010) : (0x8010)) -#define IXGBE_KRM_LINK_CTRL_1(P) ((P == 0) ? (0x420C) : (0x820C)) -#define IXGBE_KRM_DSP_TXFFE_STATE_4(P) ((P == 0) ? (0x4634) : (0x8634)) -#define IXGBE_KRM_DSP_TXFFE_STATE_5(P) ((P == 0) ? (0x4638) : (0x8638)) -#define IXGBE_KRM_RX_TRN_LINKUP_CTRL(P) ((P == 0) ? (0x4B00) : (0x8B00)) -#define IXGBE_KRM_PMD_DFX_BURNIN(P) ((P == 0) ? (0x4E00) : (0x8E00)) -#define IXGBE_KRM_TX_COEFF_CTRL_1(P) ((P == 0) ? (0x5520) : (0x9520)) -#define IXGBE_KRM_RX_ANA_CTL(P) ((P == 0) ? (0x5A00) : (0x9A00)) +#define IXGBE_FUSES0_GROUP(_i) (0x11158 + ((_i) * 4)) +#define IXGBE_FUSES0_300MHZ BIT(5) +#define IXGBE_FUSES0_REV1 BIT(6) + +#define IXGBE_KRM_PORT_CAR_GEN_CTRL(P) ((P) ? 0x8010 : 0x4010) +#define IXGBE_KRM_LINK_CTRL_1(P) ((P) ? 0x820C : 0x420C) +#define IXGBE_KRM_DSP_TXFFE_STATE_4(P) ((P) ? 0x8634 : 0x4634) +#define IXGBE_KRM_DSP_TXFFE_STATE_5(P) ((P) ? 0x8638 : 0x4638) +#define IXGBE_KRM_RX_TRN_LINKUP_CTRL(P) ((P) ? 0x8B00 : 0x4B00) +#define IXGBE_KRM_PMD_DFX_BURNIN(P) ((P) ? 0x8E00 : 0x4E00) +#define IXGBE_KRM_TX_COEFF_CTRL_1(P) ((P) ? 0x9520 : 0x5520) +#define IXGBE_KRM_RX_ANA_CTL(P) ((P) ? 0x9A00 : 0x5A00) #define IXGBE_KRM_PORT_CAR_GEN_CTRL_NELB_32B (1 << 9) #define IXGBE_KRM_PORT_CAR_GEN_CTRL_NELB_KRPCS (1 << 11) @@ -3339,4 +3577,6 @@ struct ixgbe_info { #define IXGBE_SB_IOSF_TARGET_KX4_PCS0 2 #define IXGBE_SB_IOSF_TARGET_KX4_PCS1 3 +#define IXGBE_NW_MNG_IF_SEL 0x00011178 +#define IXGBE_NW_MNG_IF_SEL_INT_PHY_MODE BIT(24) #endif /* _IXGBE_TYPE_H_ */ diff --git a/kernel/drivers/net/ethernet/intel/ixgbe/ixgbe_x540.c b/kernel/drivers/net/ethernet/intel/ixgbe/ixgbe_x540.c index f5f948d08..c1d4584f6 100644 --- a/kernel/drivers/net/ethernet/intel/ixgbe/ixgbe_x540.c +++ b/kernel/drivers/net/ethernet/intel/ixgbe/ixgbe_x540.c @@ -54,6 +54,11 @@ enum ixgbe_media_type ixgbe_get_media_type_X540(struct ixgbe_hw *hw) s32 ixgbe_get_invariants_X540(struct ixgbe_hw *hw) { struct ixgbe_mac_info *mac = &hw->mac; + struct ixgbe_phy_info *phy = &hw->phy; + + /* set_phy_power was set by default to NULL */ + if (!ixgbe_mng_present(hw)) + phy->ops.set_phy_power = ixgbe_set_copper_phy_power; mac->mcft_size = IXGBE_X540_MC_TBL_SIZE; mac->vft_size = IXGBE_X540_VFT_TBL_SIZE; @@ -202,7 +207,7 @@ s32 ixgbe_init_eeprom_params_X540(struct ixgbe_hw *hw) eeprom->semaphore_delay = 10; eeprom->type = ixgbe_flash; - eec = IXGBE_READ_REG(hw, IXGBE_EEC); + eec = IXGBE_READ_REG(hw, IXGBE_EEC(hw)); eeprom_size = (u16)((eec & IXGBE_EEC_SIZE) >> IXGBE_EEC_SIZE_SHIFT); eeprom->word_size = 1 << (eeprom_size + @@ -504,8 +509,8 @@ static s32 ixgbe_update_flash_X540(struct ixgbe_hw *hw) return status; } - flup = IXGBE_READ_REG(hw, IXGBE_EEC) | IXGBE_EEC_FLUP; - IXGBE_WRITE_REG(hw, IXGBE_EEC, flup); + flup = IXGBE_READ_REG(hw, IXGBE_EEC(hw)) | IXGBE_EEC_FLUP; + IXGBE_WRITE_REG(hw, IXGBE_EEC(hw), flup); status = ixgbe_poll_flash_update_done_X540(hw); if (status == 0) @@ -514,11 +519,11 @@ static s32 ixgbe_update_flash_X540(struct ixgbe_hw *hw) hw_dbg(hw, "Flash update time out\n"); if (hw->revision_id == 0) { - flup = IXGBE_READ_REG(hw, IXGBE_EEC); + flup = IXGBE_READ_REG(hw, IXGBE_EEC(hw)); if (flup & IXGBE_EEC_SEC1VAL) { flup |= IXGBE_EEC_FLUP; - IXGBE_WRITE_REG(hw, IXGBE_EEC, flup); + IXGBE_WRITE_REG(hw, IXGBE_EEC(hw), flup); } status = ixgbe_poll_flash_update_done_X540(hw); @@ -544,7 +549,7 @@ static s32 ixgbe_poll_flash_update_done_X540(struct ixgbe_hw *hw) u32 reg; for (i = 0; i < IXGBE_FLUDONE_ATTEMPTS; i++) { - reg = IXGBE_READ_REG(hw, IXGBE_EEC); + reg = IXGBE_READ_REG(hw, IXGBE_EEC(hw)); if (reg & IXGBE_EEC_FLUDONE) return 0; udelay(5); @@ -562,62 +567,85 @@ static s32 ixgbe_poll_flash_update_done_X540(struct ixgbe_hw *hw) **/ s32 ixgbe_acquire_swfw_sync_X540(struct ixgbe_hw *hw, u32 mask) { - u32 swfw_sync; - u32 swmask = mask; - u32 fwmask = mask << 5; - u32 hwmask = 0; + u32 swmask = mask & IXGBE_GSSR_NVM_PHY_MASK; + u32 swi2c_mask = mask & IXGBE_GSSR_I2C_MASK; + u32 fwmask = swmask << 5; u32 timeout = 200; + u32 hwmask = 0; + u32 swfw_sync; u32 i; - if (swmask == IXGBE_GSSR_EEP_SM) + if (swmask & IXGBE_GSSR_EEP_SM) hwmask = IXGBE_GSSR_FLASH_SM; + /* SW only mask does not have FW bit pair */ + if (mask & IXGBE_GSSR_SW_MNG_SM) + swmask |= IXGBE_GSSR_SW_MNG_SM; + + swmask |= swi2c_mask; + fwmask |= swi2c_mask << 2; for (i = 0; i < timeout; i++) { - /* - * SW NVM semaphore bit is used for access to all + /* SW NVM semaphore bit is used for access to all * SW_FW_SYNC bits (not just NVM) */ if (ixgbe_get_swfw_sync_semaphore(hw)) return IXGBE_ERR_SWFW_SYNC; - swfw_sync = IXGBE_READ_REG(hw, IXGBE_SWFW_SYNC); + swfw_sync = IXGBE_READ_REG(hw, IXGBE_SWFW_SYNC(hw)); if (!(swfw_sync & (fwmask | swmask | hwmask))) { swfw_sync |= swmask; - IXGBE_WRITE_REG(hw, IXGBE_SWFW_SYNC, swfw_sync); - ixgbe_release_swfw_sync_semaphore(hw); - break; - } else { - /* - * Firmware currently using resource (fwmask), - * hardware currently using resource (hwmask), - * or other software thread currently using - * resource (swmask) - */ + IXGBE_WRITE_REG(hw, IXGBE_SWFW_SYNC(hw), swfw_sync); ixgbe_release_swfw_sync_semaphore(hw); - usleep_range(5000, 10000); + usleep_range(5000, 6000); + return 0; } + /* Firmware currently using resource (fwmask), hardware + * currently using resource (hwmask), or other software + * thread currently using resource (swmask) + */ + ixgbe_release_swfw_sync_semaphore(hw); + usleep_range(5000, 10000); } - /* - * If the resource is not released by the FW/HW the SW can assume that - * the FW/HW malfunctions. In that case the SW should sets the - * SW bit(s) of the requested resource(s) while ignoring the - * corresponding FW/HW bits in the SW_FW_SYNC register. - */ - if (i >= timeout) { - swfw_sync = IXGBE_READ_REG(hw, IXGBE_SWFW_SYNC); - if (swfw_sync & (fwmask | hwmask)) { - if (ixgbe_get_swfw_sync_semaphore(hw)) - return IXGBE_ERR_SWFW_SYNC; + /* Failed to get SW only semaphore */ + if (swmask == IXGBE_GSSR_SW_MNG_SM) { + hw_dbg(hw, "Failed to get SW only semaphore\n"); + return IXGBE_ERR_SWFW_SYNC; + } - swfw_sync |= swmask; - IXGBE_WRITE_REG(hw, IXGBE_SWFW_SYNC, swfw_sync); - ixgbe_release_swfw_sync_semaphore(hw); - } + /* If the resource is not released by the FW/HW the SW can assume that + * the FW/HW malfunctions. In that case the SW should set the SW bit(s) + * of the requested resource(s) while ignoring the corresponding FW/HW + * bits in the SW_FW_SYNC register. + */ + if (ixgbe_get_swfw_sync_semaphore(hw)) + return IXGBE_ERR_SWFW_SYNC; + swfw_sync = IXGBE_READ_REG(hw, IXGBE_SWFW_SYNC(hw)); + if (swfw_sync & (fwmask | hwmask)) { + swfw_sync |= swmask; + IXGBE_WRITE_REG(hw, IXGBE_SWFW_SYNC(hw), swfw_sync); + ixgbe_release_swfw_sync_semaphore(hw); + usleep_range(5000, 6000); + return 0; + } + /* If the resource is not released by other SW the SW can assume that + * the other SW malfunctions. In that case the SW should clear all SW + * flags that it does not own and then repeat the whole process once + * again. + */ + if (swfw_sync & swmask) { + u32 rmask = IXGBE_GSSR_EEP_SM | IXGBE_GSSR_PHY0_SM | + IXGBE_GSSR_PHY1_SM | IXGBE_GSSR_MAC_CSR_SM; + + if (swi2c_mask) + rmask |= IXGBE_GSSR_I2C_MASK; + ixgbe_release_swfw_sync_X540(hw, rmask); + ixgbe_release_swfw_sync_semaphore(hw); + return IXGBE_ERR_SWFW_SYNC; } + ixgbe_release_swfw_sync_semaphore(hw); - usleep_range(5000, 10000); - return 0; + return IXGBE_ERR_SWFW_SYNC; } /** @@ -630,17 +658,19 @@ s32 ixgbe_acquire_swfw_sync_X540(struct ixgbe_hw *hw, u32 mask) **/ void ixgbe_release_swfw_sync_X540(struct ixgbe_hw *hw, u32 mask) { + u32 swmask = mask & (IXGBE_GSSR_NVM_PHY_MASK | IXGBE_GSSR_SW_MNG_SM); u32 swfw_sync; - u32 swmask = mask; + if (mask & IXGBE_GSSR_I2C_MASK) + swmask |= mask & IXGBE_GSSR_I2C_MASK; ixgbe_get_swfw_sync_semaphore(hw); - swfw_sync = IXGBE_READ_REG(hw, IXGBE_SWFW_SYNC); + swfw_sync = IXGBE_READ_REG(hw, IXGBE_SWFW_SYNC(hw)); swfw_sync &= ~swmask; - IXGBE_WRITE_REG(hw, IXGBE_SWFW_SYNC, swfw_sync); + IXGBE_WRITE_REG(hw, IXGBE_SWFW_SYNC(hw), swfw_sync); ixgbe_release_swfw_sync_semaphore(hw); - usleep_range(5000, 10000); + usleep_range(5000, 6000); } /** @@ -660,7 +690,7 @@ static s32 ixgbe_get_swfw_sync_semaphore(struct ixgbe_hw *hw) /* If the SMBI bit is 0 when we read it, then the bit will be * set and we have the semaphore */ - swsm = IXGBE_READ_REG(hw, IXGBE_SWSM); + swsm = IXGBE_READ_REG(hw, IXGBE_SWSM(hw)); if (!(swsm & IXGBE_SWSM_SMBI)) break; usleep_range(50, 100); @@ -674,13 +704,18 @@ static s32 ixgbe_get_swfw_sync_semaphore(struct ixgbe_hw *hw) /* Now get the semaphore between SW/FW through the REGSMP bit */ for (i = 0; i < timeout; i++) { - swsm = IXGBE_READ_REG(hw, IXGBE_SWFW_SYNC); + swsm = IXGBE_READ_REG(hw, IXGBE_SWFW_SYNC(hw)); if (!(swsm & IXGBE_SWFW_REGSMP)) return 0; usleep_range(50, 100); } + /* Release semaphores and return error if SW NVM semaphore + * was not granted because we do not have access to the EEPROM + */ + hw_dbg(hw, "REGSMP Software NVM semaphore not granted\n"); + ixgbe_release_swfw_sync_semaphore(hw); return IXGBE_ERR_EEPROM; } @@ -696,13 +731,13 @@ static void ixgbe_release_swfw_sync_semaphore(struct ixgbe_hw *hw) /* Release both semaphores by writing 0 to the bits REGSMP and SMBI */ - swsm = IXGBE_READ_REG(hw, IXGBE_SWSM); - swsm &= ~IXGBE_SWSM_SMBI; - IXGBE_WRITE_REG(hw, IXGBE_SWSM, swsm); - - swsm = IXGBE_READ_REG(hw, IXGBE_SWFW_SYNC); + swsm = IXGBE_READ_REG(hw, IXGBE_SWFW_SYNC(hw)); swsm &= ~IXGBE_SWFW_REGSMP; - IXGBE_WRITE_REG(hw, IXGBE_SWFW_SYNC, swsm); + IXGBE_WRITE_REG(hw, IXGBE_SWFW_SYNC(hw), swsm); + + swsm = IXGBE_READ_REG(hw, IXGBE_SWSM(hw)); + swsm &= ~IXGBE_SWSM_SMBI; + IXGBE_WRITE_REG(hw, IXGBE_SWSM(hw), swsm); IXGBE_WRITE_FLUSH(hw); } @@ -850,9 +885,14 @@ static struct ixgbe_phy_operations phy_ops_X540 = { .read_i2c_eeprom = &ixgbe_read_i2c_eeprom_generic, .write_i2c_eeprom = &ixgbe_write_i2c_eeprom_generic, .check_overtemp = &ixgbe_tn_check_overtemp, + .set_phy_power = &ixgbe_set_copper_phy_power, .get_firmware_version = &ixgbe_get_phy_firmware_version_generic, }; +static const u32 ixgbe_mvals_X540[IXGBE_MVALS_IDX_LIMIT] = { + IXGBE_MVALS_INIT(X540) +}; + struct ixgbe_info ixgbe_X540_info = { .mac = ixgbe_mac_X540, .get_invariants = &ixgbe_get_invariants_X540, @@ -860,4 +900,5 @@ struct ixgbe_info ixgbe_X540_info = { .eeprom_ops = &eeprom_ops_X540, .phy_ops = &phy_ops_X540, .mbx_ops = &mbx_ops_generic, + .mvals = ixgbe_mvals_X540, }; diff --git a/kernel/drivers/net/ethernet/intel/ixgbe/ixgbe_x550.c b/kernel/drivers/net/ethernet/intel/ixgbe/ixgbe_x550.c index cf5cf819a..ebe0ac950 100644 --- a/kernel/drivers/net/ethernet/intel/ixgbe/ixgbe_x550.c +++ b/kernel/drivers/net/ethernet/intel/ixgbe/ixgbe_x550.c @@ -1,7 +1,7 @@ /******************************************************************************* * * Intel 10 Gigabit PCI Express Linux driver - * Copyright(c) 1999 - 2014 Intel Corporation. + * Copyright(c) 1999 - 2015 Intel Corporation. * * This program is free software; you can redistribute it and/or modify it * under the terms and conditions of the GNU General Public License, @@ -26,6 +26,322 @@ #include "ixgbe_common.h" #include "ixgbe_phy.h" +static s32 ixgbe_get_invariants_X550_x(struct ixgbe_hw *hw) +{ + struct ixgbe_mac_info *mac = &hw->mac; + struct ixgbe_phy_info *phy = &hw->phy; + + /* Start with X540 invariants, since so simular */ + ixgbe_get_invariants_X540(hw); + + if (mac->ops.get_media_type(hw) != ixgbe_media_type_copper) + phy->ops.set_phy_power = NULL; + + return 0; +} + +/** ixgbe_setup_mux_ctl - Setup ESDP register for I2C mux control + * @hw: pointer to hardware structure + **/ +static void ixgbe_setup_mux_ctl(struct ixgbe_hw *hw) +{ + u32 esdp = IXGBE_READ_REG(hw, IXGBE_ESDP); + + if (hw->bus.lan_id) { + esdp &= ~(IXGBE_ESDP_SDP1_NATIVE | IXGBE_ESDP_SDP1); + esdp |= IXGBE_ESDP_SDP1_DIR; + } + esdp &= ~(IXGBE_ESDP_SDP0_NATIVE | IXGBE_ESDP_SDP0_DIR); + IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp); + IXGBE_WRITE_FLUSH(hw); +} + +/** + * ixgbe_read_cs4227 - Read CS4227 register + * @hw: pointer to hardware structure + * @reg: register number to write + * @value: pointer to receive value read + * + * Returns status code + */ +static s32 ixgbe_read_cs4227(struct ixgbe_hw *hw, u16 reg, u16 *value) +{ + return hw->phy.ops.read_i2c_combined_unlocked(hw, IXGBE_CS4227, reg, + value); +} + +/** + * ixgbe_write_cs4227 - Write CS4227 register + * @hw: pointer to hardware structure + * @reg: register number to write + * @value: value to write to register + * + * Returns status code + */ +static s32 ixgbe_write_cs4227(struct ixgbe_hw *hw, u16 reg, u16 value) +{ + return hw->phy.ops.write_i2c_combined_unlocked(hw, IXGBE_CS4227, reg, + value); +} + +/** + * ixgbe_check_cs4227_reg - Perform diag on a CS4227 register + * @hw: pointer to hardware structure + * @reg: the register to check + * + * Performs a diagnostic on a register in the CS4227 chip. Returns an error + * if it is not operating correctly. + * This function assumes that the caller has acquired the proper semaphore. + */ +static s32 ixgbe_check_cs4227_reg(struct ixgbe_hw *hw, u16 reg) +{ + s32 status; + u32 retry; + u16 reg_val; + + reg_val = (IXGBE_CS4227_EDC_MODE_DIAG << 1) | 1; + status = ixgbe_write_cs4227(hw, reg, reg_val); + if (status) + return status; + for (retry = 0; retry < IXGBE_CS4227_RETRIES; retry++) { + msleep(IXGBE_CS4227_CHECK_DELAY); + reg_val = 0xFFFF; + ixgbe_read_cs4227(hw, reg, ®_val); + if (!reg_val) + break; + } + if (reg_val) { + hw_err(hw, "CS4227 reg 0x%04X failed diagnostic\n", reg); + return status; + } + + return 0; +} + +/** + * ixgbe_get_cs4227_status - Return CS4227 status + * @hw: pointer to hardware structure + * + * Performs a diagnostic on the CS4227 chip. Returns an error if it is + * not operating correctly. + * This function assumes that the caller has acquired the proper semaphore. + */ +static s32 ixgbe_get_cs4227_status(struct ixgbe_hw *hw) +{ + s32 status; + u16 value = 0; + + /* Exit if the diagnostic has already been performed. */ + status = ixgbe_read_cs4227(hw, IXGBE_CS4227_SCRATCH, &value); + if (status) + return status; + if (value == IXGBE_CS4227_RESET_COMPLETE) + return 0; + + /* Check port 0. */ + status = ixgbe_check_cs4227_reg(hw, IXGBE_CS4227_LINE_SPARE24_LSB); + if (status) + return status; + + status = ixgbe_check_cs4227_reg(hw, IXGBE_CS4227_HOST_SPARE24_LSB); + if (status) + return status; + + /* Check port 1. */ + status = ixgbe_check_cs4227_reg(hw, IXGBE_CS4227_LINE_SPARE24_LSB + + (1 << 12)); + if (status) + return status; + + return ixgbe_check_cs4227_reg(hw, IXGBE_CS4227_HOST_SPARE24_LSB + + (1 << 12)); +} + +/** + * ixgbe_read_pe - Read register from port expander + * @hw: pointer to hardware structure + * @reg: register number to read + * @value: pointer to receive read value + * + * Returns status code + */ +static s32 ixgbe_read_pe(struct ixgbe_hw *hw, u8 reg, u8 *value) +{ + s32 status; + + status = ixgbe_read_i2c_byte_generic_unlocked(hw, reg, IXGBE_PE, value); + if (status) + hw_err(hw, "port expander access failed with %d\n", status); + return status; +} + +/** + * ixgbe_write_pe - Write register to port expander + * @hw: pointer to hardware structure + * @reg: register number to write + * @value: value to write + * + * Returns status code + */ +static s32 ixgbe_write_pe(struct ixgbe_hw *hw, u8 reg, u8 value) +{ + s32 status; + + status = ixgbe_write_i2c_byte_generic_unlocked(hw, reg, IXGBE_PE, + value); + if (status) + hw_err(hw, "port expander access failed with %d\n", status); + return status; +} + +/** + * ixgbe_reset_cs4227 - Reset CS4227 using port expander + * @hw: pointer to hardware structure + * + * This function assumes that the caller has acquired the proper semaphore. + * Returns error code + */ +static s32 ixgbe_reset_cs4227(struct ixgbe_hw *hw) +{ + s32 status; + u32 retry; + u16 value; + u8 reg; + + /* Trigger hard reset. */ + status = ixgbe_read_pe(hw, IXGBE_PE_OUTPUT, ®); + if (status) + return status; + reg |= IXGBE_PE_BIT1; + status = ixgbe_write_pe(hw, IXGBE_PE_OUTPUT, reg); + if (status) + return status; + + status = ixgbe_read_pe(hw, IXGBE_PE_CONFIG, ®); + if (status) + return status; + reg &= ~IXGBE_PE_BIT1; + status = ixgbe_write_pe(hw, IXGBE_PE_CONFIG, reg); + if (status) + return status; + + status = ixgbe_read_pe(hw, IXGBE_PE_OUTPUT, ®); + if (status) + return status; + reg &= ~IXGBE_PE_BIT1; + status = ixgbe_write_pe(hw, IXGBE_PE_OUTPUT, reg); + if (status) + return status; + + usleep_range(IXGBE_CS4227_RESET_HOLD, IXGBE_CS4227_RESET_HOLD + 100); + + status = ixgbe_read_pe(hw, IXGBE_PE_OUTPUT, ®); + if (status) + return status; + reg |= IXGBE_PE_BIT1; + status = ixgbe_write_pe(hw, IXGBE_PE_OUTPUT, reg); + if (status) + return status; + + /* Wait for the reset to complete. */ + msleep(IXGBE_CS4227_RESET_DELAY); + for (retry = 0; retry < IXGBE_CS4227_RETRIES; retry++) { + status = ixgbe_read_cs4227(hw, IXGBE_CS4227_EFUSE_STATUS, + &value); + if (!status && value == IXGBE_CS4227_EEPROM_LOAD_OK) + break; + msleep(IXGBE_CS4227_CHECK_DELAY); + } + if (retry == IXGBE_CS4227_RETRIES) { + hw_err(hw, "CS4227 reset did not complete\n"); + return IXGBE_ERR_PHY; + } + + status = ixgbe_read_cs4227(hw, IXGBE_CS4227_EEPROM_STATUS, &value); + if (status || !(value & IXGBE_CS4227_EEPROM_LOAD_OK)) { + hw_err(hw, "CS4227 EEPROM did not load successfully\n"); + return IXGBE_ERR_PHY; + } + + return 0; +} + +/** + * ixgbe_check_cs4227 - Check CS4227 and reset as needed + * @hw: pointer to hardware structure + */ +static void ixgbe_check_cs4227(struct ixgbe_hw *hw) +{ + u32 swfw_mask = hw->phy.phy_semaphore_mask; + s32 status; + u16 value; + u8 retry; + + for (retry = 0; retry < IXGBE_CS4227_RETRIES; retry++) { + status = hw->mac.ops.acquire_swfw_sync(hw, swfw_mask); + if (status) { + hw_err(hw, "semaphore failed with %d\n", status); + msleep(IXGBE_CS4227_CHECK_DELAY); + continue; + } + + /* Get status of reset flow. */ + status = ixgbe_read_cs4227(hw, IXGBE_CS4227_SCRATCH, &value); + if (!status && value == IXGBE_CS4227_RESET_COMPLETE) + goto out; + + if (status || value != IXGBE_CS4227_RESET_PENDING) + break; + + /* Reset is pending. Wait and check again. */ + hw->mac.ops.release_swfw_sync(hw, swfw_mask); + msleep(IXGBE_CS4227_CHECK_DELAY); + } + /* If still pending, assume other instance failed. */ + if (retry == IXGBE_CS4227_RETRIES) { + status = hw->mac.ops.acquire_swfw_sync(hw, swfw_mask); + if (status) { + hw_err(hw, "semaphore failed with %d\n", status); + return; + } + } + + /* Reset the CS4227. */ + status = ixgbe_reset_cs4227(hw); + if (status) { + hw_err(hw, "CS4227 reset failed: %d", status); + goto out; + } + + /* Reset takes so long, temporarily release semaphore in case the + * other driver instance is waiting for the reset indication. + */ + ixgbe_write_cs4227(hw, IXGBE_CS4227_SCRATCH, + IXGBE_CS4227_RESET_PENDING); + hw->mac.ops.release_swfw_sync(hw, swfw_mask); + usleep_range(10000, 12000); + status = hw->mac.ops.acquire_swfw_sync(hw, swfw_mask); + if (status) { + hw_err(hw, "semaphore failed with %d", status); + return; + } + + /* Is the CS4227 working correctly? */ + status = ixgbe_get_cs4227_status(hw); + if (status) { + hw_err(hw, "CS4227 status failed: %d", status); + goto out; + } + + /* Record completion for next time. */ + status = ixgbe_write_cs4227(hw, IXGBE_CS4227_SCRATCH, + IXGBE_CS4227_RESET_COMPLETE); + +out: + hw->mac.ops.release_swfw_sync(hw, swfw_mask); + msleep(hw->eeprom.semaphore_delay); +} + /** ixgbe_identify_phy_x550em - Get PHY type based on device id * @hw: pointer to hardware structure * @@ -33,19 +349,12 @@ */ static s32 ixgbe_identify_phy_x550em(struct ixgbe_hw *hw) { - u32 esdp = IXGBE_READ_REG(hw, IXGBE_ESDP); - switch (hw->device_id) { case IXGBE_DEV_ID_X550EM_X_SFP: /* set up for CS4227 usage */ hw->phy.phy_semaphore_mask = IXGBE_GSSR_SHARED_I2C_SM; - if (hw->bus.lan_id) { - esdp &= ~(IXGBE_ESDP_SDP1_NATIVE | IXGBE_ESDP_SDP1); - esdp |= IXGBE_ESDP_SDP1_DIR; - } - esdp &= ~(IXGBE_ESDP_SDP0_NATIVE | IXGBE_ESDP_SDP0_DIR); - IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp); - + ixgbe_setup_mux_ctl(hw); + ixgbe_check_cs4227(hw); return ixgbe_identify_module_generic(hw); case IXGBE_DEV_ID_X550EM_X_KX4: hw->phy.type = ixgbe_phy_x550em_kx4; @@ -90,7 +399,7 @@ static s32 ixgbe_init_eeprom_params_X550(struct ixgbe_hw *hw) eeprom->semaphore_delay = 10; eeprom->type = ixgbe_flash; - eec = IXGBE_READ_REG(hw, IXGBE_EEC); + eec = IXGBE_READ_REG(hw, IXGBE_EEC(hw)); eeprom_size = (u16)((eec & IXGBE_EEC_SIZE) >> IXGBE_EEC_SIZE_SHIFT); eeprom->word_size = 1 << (eeprom_size + @@ -103,6 +412,39 @@ static s32 ixgbe_init_eeprom_params_X550(struct ixgbe_hw *hw) return 0; } +/** + * ixgbe_iosf_wait - Wait for IOSF command completion + * @hw: pointer to hardware structure + * @ctrl: pointer to location to receive final IOSF control value + * + * Return: failing status on timeout + * + * Note: ctrl can be NULL if the IOSF control register value is not needed + */ +static s32 ixgbe_iosf_wait(struct ixgbe_hw *hw, u32 *ctrl) +{ + u32 i, command; + + /* Check every 10 usec to see if the address cycle completed. + * The SB IOSF BUSY bit will clear when the operation is + * complete. + */ + for (i = 0; i < IXGBE_MDIO_COMMAND_TIMEOUT; i++) { + command = IXGBE_READ_REG(hw, IXGBE_SB_IOSF_INDIRECT_CTRL); + if (!(command & IXGBE_SB_IOSF_CTRL_BUSY)) + break; + usleep_range(10, 20); + } + if (ctrl) + *ctrl = command; + if (i == IXGBE_MDIO_COMMAND_TIMEOUT) { + hw_dbg(hw, "IOSF wait timed out\n"); + return IXGBE_ERR_PHY; + } + + return 0; +} + /** ixgbe_read_iosf_sb_reg_x550 - Writes a value to specified register of the * IOSF device * @hw: pointer to hardware structure @@ -113,7 +455,17 @@ static s32 ixgbe_init_eeprom_params_X550(struct ixgbe_hw *hw) static s32 ixgbe_read_iosf_sb_reg_x550(struct ixgbe_hw *hw, u32 reg_addr, u32 device_type, u32 *data) { - u32 i, command, error; + u32 gssr = IXGBE_GSSR_PHY1_SM | IXGBE_GSSR_PHY0_SM; + u32 command, error; + s32 ret; + + ret = hw->mac.ops.acquire_swfw_sync(hw, gssr); + if (ret) + return ret; + + ret = ixgbe_iosf_wait(hw, NULL); + if (ret) + goto out; command = ((reg_addr << IXGBE_SB_IOSF_CTRL_ADDR_SHIFT) | (device_type << IXGBE_SB_IOSF_CTRL_TARGET_SELECT_SHIFT)); @@ -121,17 +473,7 @@ static s32 ixgbe_read_iosf_sb_reg_x550(struct ixgbe_hw *hw, u32 reg_addr, /* Write IOSF control register */ IXGBE_WRITE_REG(hw, IXGBE_SB_IOSF_INDIRECT_CTRL, command); - /* Check every 10 usec to see if the address cycle completed. - * The SB IOSF BUSY bit will clear when the operation is - * complete - */ - for (i = 0; i < IXGBE_MDIO_COMMAND_TIMEOUT; i++) { - usleep_range(10, 20); - - command = IXGBE_READ_REG(hw, IXGBE_SB_IOSF_INDIRECT_CTRL); - if ((command & IXGBE_SB_IOSF_CTRL_BUSY) == 0) - break; - } + ret = ixgbe_iosf_wait(hw, &command); if ((command & IXGBE_SB_IOSF_CTRL_RESP_STAT_MASK) != 0) { error = (command & IXGBE_SB_IOSF_CTRL_CMPL_ERR_MASK) >> @@ -140,14 +482,12 @@ static s32 ixgbe_read_iosf_sb_reg_x550(struct ixgbe_hw *hw, u32 reg_addr, return IXGBE_ERR_PHY; } - if (i == IXGBE_MDIO_COMMAND_TIMEOUT) { - hw_dbg(hw, "Read timed out\n"); - return IXGBE_ERR_PHY; - } - - *data = IXGBE_READ_REG(hw, IXGBE_SB_IOSF_INDIRECT_DATA); + if (!ret) + *data = IXGBE_READ_REG(hw, IXGBE_SB_IOSF_INDIRECT_DATA); - return 0; +out: + hw->mac.ops.release_swfw_sync(hw, gssr); + return ret; } /** ixgbe_read_ee_hostif_data_X550 - Read EEPROM word using a host interface @@ -557,6 +897,24 @@ static s32 ixgbe_update_flash_X550(struct ixgbe_hw *hw) return status; } +/** + * ixgbe_get_bus_info_X550em - Set PCI bus info + * @hw: pointer to hardware structure + * + * Sets bus link width and speed to unknown because X550em is + * not a PCI device. + **/ +static s32 ixgbe_get_bus_info_X550em(struct ixgbe_hw *hw) +{ + hw->bus.type = ixgbe_bus_type_internal; + hw->bus.width = ixgbe_bus_width_unknown; + hw->bus.speed = ixgbe_bus_speed_unknown; + + hw->mac.ops.set_lan_id(hw); + + return 0; +} + /** ixgbe_disable_rx_x550 - Disable RX unit * * Enables the Rx DMA unit for x550 @@ -673,111 +1031,6 @@ static s32 ixgbe_write_ee_hostif_buffer_X550(struct ixgbe_hw *hw, return status; } -/** ixgbe_init_mac_link_ops_X550em - init mac link function pointers - * @hw: pointer to hardware structure - **/ -static void ixgbe_init_mac_link_ops_X550em(struct ixgbe_hw *hw) -{ - struct ixgbe_mac_info *mac = &hw->mac; - - /* CS4227 does not support autoneg, so disable the laser control - * functions for SFP+ fiber - */ - if (hw->device_id == IXGBE_DEV_ID_X550EM_X_SFP) { - mac->ops.disable_tx_laser = NULL; - mac->ops.enable_tx_laser = NULL; - mac->ops.flap_tx_laser = NULL; - } -} - -/** ixgbe_setup_sfp_modules_X550em - Setup SFP module - * @hw: pointer to hardware structure - */ -static s32 ixgbe_setup_sfp_modules_X550em(struct ixgbe_hw *hw) -{ - bool setup_linear; - u16 reg_slice, edc_mode; - s32 ret_val; - - switch (hw->phy.sfp_type) { - case ixgbe_sfp_type_unknown: - return 0; - case ixgbe_sfp_type_not_present: - return IXGBE_ERR_SFP_NOT_PRESENT; - case ixgbe_sfp_type_da_cu_core0: - case ixgbe_sfp_type_da_cu_core1: - setup_linear = true; - break; - case ixgbe_sfp_type_srlr_core0: - case ixgbe_sfp_type_srlr_core1: - case ixgbe_sfp_type_da_act_lmt_core0: - case ixgbe_sfp_type_da_act_lmt_core1: - case ixgbe_sfp_type_1g_sx_core0: - case ixgbe_sfp_type_1g_sx_core1: - setup_linear = false; - break; - default: - return IXGBE_ERR_SFP_NOT_SUPPORTED; - } - - ixgbe_init_mac_link_ops_X550em(hw); - hw->phy.ops.reset = NULL; - - /* The CS4227 slice address is the base address + the port-pair reg - * offset. I.e. Slice 0 = 0x12B0 and slice 1 = 0x22B0. - */ - reg_slice = IXGBE_CS4227_SPARE24_LSB + (hw->bus.lan_id << 12); - - if (setup_linear) - edc_mode = (IXGBE_CS4227_EDC_MODE_CX1 << 1) | 0x1; - else - edc_mode = (IXGBE_CS4227_EDC_MODE_SR << 1) | 0x1; - - /* Configure CS4227 for connection type. */ - ret_val = hw->phy.ops.write_i2c_combined(hw, IXGBE_CS4227, reg_slice, - edc_mode); - - if (ret_val) - ret_val = hw->phy.ops.write_i2c_combined(hw, 0x80, reg_slice, - edc_mode); - - return ret_val; -} - -/** ixgbe_get_link_capabilities_x550em - Determines link capabilities - * @hw: pointer to hardware structure - * @speed: pointer to link speed - * @autoneg: true when autoneg or autotry is enabled - **/ -static s32 ixgbe_get_link_capabilities_X550em(struct ixgbe_hw *hw, - ixgbe_link_speed *speed, - bool *autoneg) -{ - /* SFP */ - if (hw->phy.media_type == ixgbe_media_type_fiber) { - /* CS4227 SFP must not enable auto-negotiation */ - *autoneg = false; - - if (hw->phy.sfp_type == ixgbe_sfp_type_1g_sx_core0 || - hw->phy.sfp_type == ixgbe_sfp_type_1g_sx_core1) { - *speed = IXGBE_LINK_SPEED_1GB_FULL; - return 0; - } - - /* Link capabilities are based on SFP */ - if (hw->phy.multispeed_fiber) - *speed = IXGBE_LINK_SPEED_10GB_FULL | - IXGBE_LINK_SPEED_1GB_FULL; - else - *speed = IXGBE_LINK_SPEED_10GB_FULL; - } else { - *speed = IXGBE_LINK_SPEED_10GB_FULL | - IXGBE_LINK_SPEED_1GB_FULL; - *autoneg = true; - } - return 0; -} - /** ixgbe_write_iosf_sb_reg_x550 - Writes a value to specified register of the * IOSF device * @@ -789,7 +1042,17 @@ static s32 ixgbe_get_link_capabilities_X550em(struct ixgbe_hw *hw, static s32 ixgbe_write_iosf_sb_reg_x550(struct ixgbe_hw *hw, u32 reg_addr, u32 device_type, u32 data) { - u32 i, command, error; + u32 gssr = IXGBE_GSSR_PHY1_SM | IXGBE_GSSR_PHY0_SM; + u32 command, error; + s32 ret; + + ret = hw->mac.ops.acquire_swfw_sync(hw, gssr); + if (ret) + return ret; + + ret = ixgbe_iosf_wait(hw, NULL); + if (ret) + goto out; command = ((reg_addr << IXGBE_SB_IOSF_CTRL_ADDR_SHIFT) | (device_type << IXGBE_SB_IOSF_CTRL_TARGET_SELECT_SHIFT)); @@ -800,17 +1063,7 @@ static s32 ixgbe_write_iosf_sb_reg_x550(struct ixgbe_hw *hw, u32 reg_addr, /* Write IOSF data register */ IXGBE_WRITE_REG(hw, IXGBE_SB_IOSF_INDIRECT_DATA, data); - /* Check every 10 usec to see if the address cycle completed. - * The SB IOSF BUSY bit will clear when the operation is - * complete - */ - for (i = 0; i < IXGBE_MDIO_COMMAND_TIMEOUT; i++) { - usleep_range(10, 20); - - command = IXGBE_READ_REG(hw, IXGBE_SB_IOSF_INDIRECT_CTRL); - if ((command & IXGBE_SB_IOSF_CTRL_BUSY) == 0) - break; - } + ret = ixgbe_iosf_wait(hw, &command); if ((command & IXGBE_SB_IOSF_CTRL_RESP_STAT_MASK) != 0) { error = (command & IXGBE_SB_IOSF_CTRL_CMPL_ERR_MASK) >> @@ -819,12 +1072,9 @@ static s32 ixgbe_write_iosf_sb_reg_x550(struct ixgbe_hw *hw, u32 reg_addr, return IXGBE_ERR_PHY; } - if (i == IXGBE_MDIO_COMMAND_TIMEOUT) { - hw_dbg(hw, "Write timed out\n"); - return IXGBE_ERR_PHY; - } - - return 0; +out: + hw->mac.ops.release_swfw_sync(hw, gssr); + return ret; } /** ixgbe_setup_ixfi_x550em - Configure the KR PHY for iXFI mode. @@ -863,7 +1113,7 @@ static s32 ixgbe_setup_ixfi_x550em(struct ixgbe_hw *hw, ixgbe_link_speed *speed) } status = ixgbe_write_iosf_sb_reg_x550(hw, - IXGBE_KRM_RX_TRN_LINKUP_CTRL(hw->bus.lan_id), + IXGBE_KRM_LINK_CTRL_1(hw->bus.lan_id), IXGBE_SB_IOSF_TARGET_KR_PHY, reg_val); if (status) return status; @@ -945,6 +1195,476 @@ static s32 ixgbe_setup_ixfi_x550em(struct ixgbe_hw *hw, ixgbe_link_speed *speed) return status; } +/** + * ixgbe_supported_sfp_modules_X550em - Check if SFP module type is supported + * @hw: pointer to hardware structure + * @linear: true if SFP module is linear + */ +static s32 ixgbe_supported_sfp_modules_X550em(struct ixgbe_hw *hw, bool *linear) +{ + switch (hw->phy.sfp_type) { + case ixgbe_sfp_type_not_present: + return IXGBE_ERR_SFP_NOT_PRESENT; + case ixgbe_sfp_type_da_cu_core0: + case ixgbe_sfp_type_da_cu_core1: + *linear = true; + break; + case ixgbe_sfp_type_srlr_core0: + case ixgbe_sfp_type_srlr_core1: + case ixgbe_sfp_type_da_act_lmt_core0: + case ixgbe_sfp_type_da_act_lmt_core1: + case ixgbe_sfp_type_1g_sx_core0: + case ixgbe_sfp_type_1g_sx_core1: + case ixgbe_sfp_type_1g_lx_core0: + case ixgbe_sfp_type_1g_lx_core1: + *linear = false; + break; + case ixgbe_sfp_type_unknown: + case ixgbe_sfp_type_1g_cu_core0: + case ixgbe_sfp_type_1g_cu_core1: + default: + return IXGBE_ERR_SFP_NOT_SUPPORTED; + } + + return 0; +} + +/** + * ixgbe_setup_mac_link_sfp_x550em - Configure the KR PHY for SFP. + * @hw: pointer to hardware structure + * + * Configures the extern PHY and the integrated KR PHY for SFP support. + */ +static s32 +ixgbe_setup_mac_link_sfp_x550em(struct ixgbe_hw *hw, + ixgbe_link_speed speed, + __always_unused bool autoneg_wait_to_complete) +{ + s32 status; + u16 slice, value; + bool setup_linear = false; + + /* Check if SFP module is supported and linear */ + status = ixgbe_supported_sfp_modules_X550em(hw, &setup_linear); + + /* If no SFP module present, then return success. Return success since + * there is no reason to configure CS4227 and SFP not present error is + * not accepted in the setup MAC link flow. + */ + if (status == IXGBE_ERR_SFP_NOT_PRESENT) + return 0; + + if (status) + return status; + + /* Configure CS4227 LINE side to 10G SR. */ + slice = IXGBE_CS4227_LINE_SPARE22_MSB + (hw->bus.lan_id << 12); + value = IXGBE_CS4227_SPEED_10G; + status = ixgbe_write_i2c_combined_generic(hw, IXGBE_CS4227, slice, + value); + + /* Configure CS4227 for HOST connection rate then type. */ + slice = IXGBE_CS4227_HOST_SPARE22_MSB + (hw->bus.lan_id << 12); + value = speed & IXGBE_LINK_SPEED_10GB_FULL ? + IXGBE_CS4227_SPEED_10G : IXGBE_CS4227_SPEED_1G; + status = ixgbe_write_i2c_combined_generic(hw, IXGBE_CS4227, slice, + value); + + slice = IXGBE_CS4227_HOST_SPARE24_LSB + (hw->bus.lan_id << 12); + if (setup_linear) + value = (IXGBE_CS4227_EDC_MODE_CX1 << 1) | 1; + else + value = (IXGBE_CS4227_EDC_MODE_SR << 1) | 1; + status = ixgbe_write_i2c_combined_generic(hw, IXGBE_CS4227, slice, + value); + + /* If internal link mode is XFI, then setup XFI internal link. */ + if (!(hw->phy.nw_mng_if_sel & IXGBE_NW_MNG_IF_SEL_INT_PHY_MODE)) + status = ixgbe_setup_ixfi_x550em(hw, &speed); + + return status; +} + +/** + * ixgbe_setup_mac_link_t_X550em - Sets the auto advertised link speed + * @hw: pointer to hardware structure + * @speed: new link speed + * @autoneg_wait_to_complete: true when waiting for completion is needed + * + * Setup internal/external PHY link speed based on link speed, then set + * external PHY auto advertised link speed. + * + * Returns error status for any failure + **/ +static s32 ixgbe_setup_mac_link_t_X550em(struct ixgbe_hw *hw, + ixgbe_link_speed speed, + bool autoneg_wait) +{ + s32 status; + ixgbe_link_speed force_speed; + + /* Setup internal/external PHY link speed to iXFI (10G), unless + * only 1G is auto advertised then setup KX link. + */ + if (speed & IXGBE_LINK_SPEED_10GB_FULL) + force_speed = IXGBE_LINK_SPEED_10GB_FULL; + else + force_speed = IXGBE_LINK_SPEED_1GB_FULL; + + /* If internal link mode is XFI, then setup XFI internal link. */ + if (!(hw->phy.nw_mng_if_sel & IXGBE_NW_MNG_IF_SEL_INT_PHY_MODE)) { + status = ixgbe_setup_ixfi_x550em(hw, &force_speed); + + if (status) + return status; + } + + return hw->phy.ops.setup_link_speed(hw, speed, autoneg_wait); +} + +/** ixgbe_check_link_t_X550em - Determine link and speed status + * @hw: pointer to hardware structure + * @speed: pointer to link speed + * @link_up: true when link is up + * @link_up_wait_to_complete: bool used to wait for link up or not + * + * Check that both the MAC and X557 external PHY have link. + **/ +static s32 ixgbe_check_link_t_X550em(struct ixgbe_hw *hw, + ixgbe_link_speed *speed, + bool *link_up, + bool link_up_wait_to_complete) +{ + u32 status; + u16 autoneg_status; + + if (hw->mac.ops.get_media_type(hw) != ixgbe_media_type_copper) + return IXGBE_ERR_CONFIG; + + status = ixgbe_check_mac_link_generic(hw, speed, link_up, + link_up_wait_to_complete); + + /* If check link fails or MAC link is not up, then return */ + if (status || !(*link_up)) + return status; + + /* MAC link is up, so check external PHY link. + * Read this twice back to back to indicate current status. + */ + status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_AUTO_NEG_STATUS, + IXGBE_MDIO_AUTO_NEG_DEV_TYPE, + &autoneg_status); + if (status) + return status; + + /* If external PHY link is not up, then indicate link not up */ + if (!(autoneg_status & IXGBE_MDIO_AUTO_NEG_LINK_STATUS)) + *link_up = false; + + return 0; +} + +/** ixgbe_init_mac_link_ops_X550em - init mac link function pointers + * @hw: pointer to hardware structure + **/ +static void ixgbe_init_mac_link_ops_X550em(struct ixgbe_hw *hw) +{ + struct ixgbe_mac_info *mac = &hw->mac; + + switch (mac->ops.get_media_type(hw)) { + case ixgbe_media_type_fiber: + /* CS4227 does not support autoneg, so disable the laser control + * functions for SFP+ fiber + */ + mac->ops.disable_tx_laser = NULL; + mac->ops.enable_tx_laser = NULL; + mac->ops.flap_tx_laser = NULL; + mac->ops.setup_link = ixgbe_setup_mac_link_multispeed_fiber; + mac->ops.setup_mac_link = ixgbe_setup_mac_link_sfp_x550em; + mac->ops.set_rate_select_speed = + ixgbe_set_soft_rate_select_speed; + break; + case ixgbe_media_type_copper: + mac->ops.setup_link = ixgbe_setup_mac_link_t_X550em; + mac->ops.check_link = ixgbe_check_link_t_X550em; + break; + default: + break; + } +} + +/** ixgbe_setup_sfp_modules_X550em - Setup SFP module + * @hw: pointer to hardware structure + */ +static s32 ixgbe_setup_sfp_modules_X550em(struct ixgbe_hw *hw) +{ + s32 status; + bool linear; + + /* Check if SFP module is supported */ + status = ixgbe_supported_sfp_modules_X550em(hw, &linear); + if (status) + return status; + + ixgbe_init_mac_link_ops_X550em(hw); + hw->phy.ops.reset = NULL; + + return 0; +} + +/** ixgbe_get_link_capabilities_x550em - Determines link capabilities + * @hw: pointer to hardware structure + * @speed: pointer to link speed + * @autoneg: true when autoneg or autotry is enabled + **/ +static s32 ixgbe_get_link_capabilities_X550em(struct ixgbe_hw *hw, + ixgbe_link_speed *speed, + bool *autoneg) +{ + /* SFP */ + if (hw->phy.media_type == ixgbe_media_type_fiber) { + /* CS4227 SFP must not enable auto-negotiation */ + *autoneg = false; + + if (hw->phy.sfp_type == ixgbe_sfp_type_1g_sx_core0 || + hw->phy.sfp_type == ixgbe_sfp_type_1g_sx_core1) { + *speed = IXGBE_LINK_SPEED_1GB_FULL; + return 0; + } + + /* Link capabilities are based on SFP */ + if (hw->phy.multispeed_fiber) + *speed = IXGBE_LINK_SPEED_10GB_FULL | + IXGBE_LINK_SPEED_1GB_FULL; + else + *speed = IXGBE_LINK_SPEED_10GB_FULL; + } else { + *speed = IXGBE_LINK_SPEED_10GB_FULL | + IXGBE_LINK_SPEED_1GB_FULL; + *autoneg = true; + } + return 0; +} + +/** + * ixgbe_get_lasi_ext_t_x550em - Determime external Base T PHY interrupt cause + * @hw: pointer to hardware structure + * @lsc: pointer to boolean flag which indicates whether external Base T + * PHY interrupt is lsc + * + * Determime if external Base T PHY interrupt cause is high temperature + * failure alarm or link status change. + * + * Return IXGBE_ERR_OVERTEMP if interrupt is high temperature + * failure alarm, else return PHY access status. + **/ +static s32 ixgbe_get_lasi_ext_t_x550em(struct ixgbe_hw *hw, bool *lsc) +{ + u32 status; + u16 reg; + + *lsc = false; + + /* Vendor alarm triggered */ + status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_GLOBAL_CHIP_STD_INT_FLAG, + IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE, + ®); + + if (status || !(reg & IXGBE_MDIO_GLOBAL_VEN_ALM_INT_EN)) + return status; + + /* Vendor Auto-Neg alarm triggered or Global alarm 1 triggered */ + status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_GLOBAL_INT_CHIP_VEN_FLAG, + IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE, + ®); + + if (status || !(reg & (IXGBE_MDIO_GLOBAL_AN_VEN_ALM_INT_EN | + IXGBE_MDIO_GLOBAL_ALARM_1_INT))) + return status; + + /* High temperature failure alarm triggered */ + status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_GLOBAL_ALARM_1, + IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE, + ®); + + if (status) + return status; + + /* If high temperature failure, then return over temp error and exit */ + if (reg & IXGBE_MDIO_GLOBAL_ALM_1_HI_TMP_FAIL) { + /* power down the PHY in case the PHY FW didn't already */ + ixgbe_set_copper_phy_power(hw, false); + return IXGBE_ERR_OVERTEMP; + } + + /* Vendor alarm 2 triggered */ + status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_GLOBAL_CHIP_STD_INT_FLAG, + IXGBE_MDIO_AUTO_NEG_DEV_TYPE, ®); + + if (status || !(reg & IXGBE_MDIO_GLOBAL_STD_ALM2_INT)) + return status; + + /* link connect/disconnect event occurred */ + status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_AUTO_NEG_VENDOR_TX_ALARM2, + IXGBE_MDIO_AUTO_NEG_DEV_TYPE, ®); + + if (status) + return status; + + /* Indicate LSC */ + if (reg & IXGBE_MDIO_AUTO_NEG_VEN_LSC) + *lsc = true; + + return 0; +} + +/** + * ixgbe_enable_lasi_ext_t_x550em - Enable external Base T PHY interrupts + * @hw: pointer to hardware structure + * + * Enable link status change and temperature failure alarm for the external + * Base T PHY + * + * Returns PHY access status + **/ +static s32 ixgbe_enable_lasi_ext_t_x550em(struct ixgbe_hw *hw) +{ + u32 status; + u16 reg; + bool lsc; + + /* Clear interrupt flags */ + status = ixgbe_get_lasi_ext_t_x550em(hw, &lsc); + + /* Enable link status change alarm */ + status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_PMA_TX_VEN_LASI_INT_MASK, + IXGBE_MDIO_AUTO_NEG_DEV_TYPE, ®); + if (status) + return status; + + reg |= IXGBE_MDIO_PMA_TX_VEN_LASI_INT_EN; + + status = hw->phy.ops.write_reg(hw, IXGBE_MDIO_PMA_TX_VEN_LASI_INT_MASK, + IXGBE_MDIO_AUTO_NEG_DEV_TYPE, reg); + if (status) + return status; + + /* Enables high temperature failure alarm */ + status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_GLOBAL_INT_MASK, + IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE, + ®); + if (status) + return status; + + reg |= IXGBE_MDIO_GLOBAL_INT_HI_TEMP_EN; + + status = hw->phy.ops.write_reg(hw, IXGBE_MDIO_GLOBAL_INT_MASK, + IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE, + reg); + if (status) + return status; + + /* Enable vendor Auto-Neg alarm and Global Interrupt Mask 1 alarm */ + status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_GLOBAL_INT_CHIP_VEN_MASK, + IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE, + ®); + if (status) + return status; + + reg |= (IXGBE_MDIO_GLOBAL_AN_VEN_ALM_INT_EN | + IXGBE_MDIO_GLOBAL_ALARM_1_INT); + + status = hw->phy.ops.write_reg(hw, IXGBE_MDIO_GLOBAL_INT_CHIP_VEN_MASK, + IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE, + reg); + if (status) + return status; + + /* Enable chip-wide vendor alarm */ + status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_GLOBAL_INT_CHIP_STD_MASK, + IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE, + ®); + if (status) + return status; + + reg |= IXGBE_MDIO_GLOBAL_VEN_ALM_INT_EN; + + status = hw->phy.ops.write_reg(hw, IXGBE_MDIO_GLOBAL_INT_CHIP_STD_MASK, + IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE, + reg); + + return status; +} + +/** + * ixgbe_handle_lasi_ext_t_x550em - Handle external Base T PHY interrupt + * @hw: pointer to hardware structure + * + * Handle external Base T PHY interrupt. If high temperature + * failure alarm then return error, else if link status change + * then setup internal/external PHY link + * + * Return IXGBE_ERR_OVERTEMP if interrupt is high temperature + * failure alarm, else return PHY access status. + **/ +static s32 ixgbe_handle_lasi_ext_t_x550em(struct ixgbe_hw *hw) +{ + struct ixgbe_phy_info *phy = &hw->phy; + bool lsc; + u32 status; + + status = ixgbe_get_lasi_ext_t_x550em(hw, &lsc); + if (status) + return status; + + if (lsc && phy->ops.setup_internal_link) + return phy->ops.setup_internal_link(hw); + + return 0; +} + +/** + * ixgbe_setup_kr_speed_x550em - Configure the KR PHY for link speed. + * @hw: pointer to hardware structure + * @speed: link speed + * + * Configures the integrated KR PHY. + **/ +static s32 ixgbe_setup_kr_speed_x550em(struct ixgbe_hw *hw, + ixgbe_link_speed speed) +{ + s32 status; + u32 reg_val; + + status = ixgbe_read_iosf_sb_reg_x550(hw, + IXGBE_KRM_LINK_CTRL_1(hw->bus.lan_id), + IXGBE_SB_IOSF_TARGET_KR_PHY, ®_val); + if (status) + return status; + + reg_val |= IXGBE_KRM_LINK_CTRL_1_TETH_AN_ENABLE; + reg_val &= ~(IXGBE_KRM_LINK_CTRL_1_TETH_AN_FEC_REQ | + IXGBE_KRM_LINK_CTRL_1_TETH_AN_CAP_FEC); + reg_val &= ~(IXGBE_KRM_LINK_CTRL_1_TETH_AN_CAP_KR | + IXGBE_KRM_LINK_CTRL_1_TETH_AN_CAP_KX); + + /* Advertise 10G support. */ + if (speed & IXGBE_LINK_SPEED_10GB_FULL) + reg_val |= IXGBE_KRM_LINK_CTRL_1_TETH_AN_CAP_KR; + + /* Advertise 1G support. */ + if (speed & IXGBE_LINK_SPEED_1GB_FULL) + reg_val |= IXGBE_KRM_LINK_CTRL_1_TETH_AN_CAP_KX; + + /* Restart auto-negotiation. */ + reg_val |= IXGBE_KRM_LINK_CTRL_1_TETH_AN_RESTART; + status = ixgbe_write_iosf_sb_reg_x550(hw, + IXGBE_KRM_LINK_CTRL_1(hw->bus.lan_id), + IXGBE_SB_IOSF_TARGET_KR_PHY, reg_val); + + return status; +} + /** ixgbe_setup_kx4_x550em - Configure the KX4 PHY. * @hw: pointer to hardware structure * @@ -990,85 +1710,82 @@ static s32 ixgbe_setup_kx4_x550em(struct ixgbe_hw *hw) **/ static s32 ixgbe_setup_kr_x550em(struct ixgbe_hw *hw) { - s32 status; - u32 reg_val; + return ixgbe_setup_kr_speed_x550em(hw, hw->phy.autoneg_advertised); +} - status = ixgbe_read_iosf_sb_reg_x550(hw, - IXGBE_KRM_LINK_CTRL_1(hw->bus.lan_id), - IXGBE_SB_IOSF_TARGET_KR_PHY, ®_val); - if (status) - return status; +/** ixgbe_ext_phy_t_x550em_get_link - Get ext phy link status + * @hw: address of hardware structure + * @link_up: address of boolean to indicate link status + * + * Returns error code if unable to get link status. + **/ +static s32 ixgbe_ext_phy_t_x550em_get_link(struct ixgbe_hw *hw, bool *link_up) +{ + u32 ret; + u16 autoneg_status; - reg_val |= IXGBE_KRM_LINK_CTRL_1_TETH_AN_ENABLE; - reg_val |= IXGBE_KRM_LINK_CTRL_1_TETH_AN_FEC_REQ; - reg_val |= IXGBE_KRM_LINK_CTRL_1_TETH_AN_CAP_FEC; - reg_val &= ~(IXGBE_KRM_LINK_CTRL_1_TETH_AN_CAP_KR | - IXGBE_KRM_LINK_CTRL_1_TETH_AN_CAP_KX); + *link_up = false; - /* Advertise 10G support. */ - if (hw->phy.autoneg_advertised & IXGBE_LINK_SPEED_10GB_FULL) - reg_val |= IXGBE_KRM_LINK_CTRL_1_TETH_AN_CAP_KR; + /* read this twice back to back to indicate current status */ + ret = hw->phy.ops.read_reg(hw, IXGBE_MDIO_AUTO_NEG_STATUS, + IXGBE_MDIO_AUTO_NEG_DEV_TYPE, + &autoneg_status); + if (ret) + return ret; - /* Advertise 1G support. */ - if (hw->phy.autoneg_advertised & IXGBE_LINK_SPEED_1GB_FULL) - reg_val |= IXGBE_KRM_LINK_CTRL_1_TETH_AN_CAP_KX; + ret = hw->phy.ops.read_reg(hw, IXGBE_MDIO_AUTO_NEG_STATUS, + IXGBE_MDIO_AUTO_NEG_DEV_TYPE, + &autoneg_status); + if (ret) + return ret; - /* Restart auto-negotiation. */ - reg_val |= IXGBE_KRM_LINK_CTRL_1_TETH_AN_RESTART; - status = ixgbe_write_iosf_sb_reg_x550(hw, - IXGBE_KRM_LINK_CTRL_1(hw->bus.lan_id), - IXGBE_SB_IOSF_TARGET_KR_PHY, reg_val); + *link_up = !!(autoneg_status & IXGBE_MDIO_AUTO_NEG_LINK_STATUS); - return status; + return 0; } -/** ixgbe_setup_internal_phy_x550em - Configure integrated KR PHY +/** ixgbe_setup_internal_phy_t_x550em - Configure KR PHY to X557 link * @hw: point to hardware structure * - * Configures the integrated KR PHY to talk to the external PHY. The base - * driver will call this function when it gets notification via interrupt from - * the external PHY. This function forces the internal PHY into iXFI mode at - * the correct speed. + * Configures the link between the integrated KR PHY and the external X557 PHY + * The driver will call this function when it gets a link status change + * interrupt from the X557 PHY. This function configures the link speed + * between the PHYs to match the link speed of the BASE-T link. * - * A return of a non-zero value indicates an error, and the base driver should - * not report link up. + * A return of a non-zero value indicates an error, and the base driver should + * not report link up. **/ -static s32 ixgbe_setup_internal_phy_x550em(struct ixgbe_hw *hw) +static s32 ixgbe_setup_internal_phy_t_x550em(struct ixgbe_hw *hw) { - u32 status; - u16 lasi, autoneg_status, speed; ixgbe_link_speed force_speed; + bool link_up; + u32 status; + u16 speed; + + if (hw->mac.ops.get_media_type(hw) != ixgbe_media_type_copper) + return IXGBE_ERR_CONFIG; - /* Verify that the external link status has changed */ - status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_XENPAK_LASI_STATUS, - IXGBE_MDIO_PMA_PMD_DEV_TYPE, &lasi); + /* If link is not up, then there is no setup necessary so return */ + status = ixgbe_ext_phy_t_x550em_get_link(hw, &link_up); if (status) return status; - /* If there was no change in link status, we can just exit */ - if (!(lasi & IXGBE_XENPAK_LASI_LINK_STATUS_ALARM)) + if (!link_up) return 0; - /* we read this twice back to back to indicate current status */ - status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_AUTO_NEG_STATUS, + status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_AUTO_NEG_VENDOR_STAT, IXGBE_MDIO_AUTO_NEG_DEV_TYPE, - &autoneg_status); + &speed); if (status) return status; - status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_AUTO_NEG_STATUS, - IXGBE_MDIO_AUTO_NEG_DEV_TYPE, - &autoneg_status); + /* If link is not still up, then no setup is necessary so return */ + status = ixgbe_ext_phy_t_x550em_get_link(hw, &link_up); if (status) return status; - /* If link is not up return an error indicating treat link as down */ - if (!(autoneg_status & IXGBE_MDIO_AUTO_NEG_LINK_STATUS)) - return IXGBE_ERR_INVALID_LINK_SETTINGS; - - status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_AUTO_NEG_VENDOR_STAT, - IXGBE_MDIO_AUTO_NEG_DEV_TYPE, - &speed); + if (!link_up) + return 0; /* clear everything but the speed and duplex bits */ speed &= IXGBE_MDIO_AUTO_NEG_VENDOR_STATUS_MASK; @@ -1088,6 +1805,160 @@ static s32 ixgbe_setup_internal_phy_x550em(struct ixgbe_hw *hw) return ixgbe_setup_ixfi_x550em(hw, &force_speed); } +/** ixgbe_reset_phy_t_X550em - Performs X557 PHY reset and enables LASI + * @hw: pointer to hardware structure + **/ +static s32 ixgbe_reset_phy_t_X550em(struct ixgbe_hw *hw) +{ + s32 status; + + status = ixgbe_reset_phy_generic(hw); + + if (status) + return status; + + /* Configure Link Status Alarm and Temperature Threshold interrupts */ + return ixgbe_enable_lasi_ext_t_x550em(hw); +} + +/** ixgbe_get_lcd_x550em - Determine lowest common denominator + * @hw: pointer to hardware structure + * @lcd_speed: pointer to lowest common link speed + * + * Determine lowest common link speed with link partner. + **/ +static s32 ixgbe_get_lcd_t_x550em(struct ixgbe_hw *hw, + ixgbe_link_speed *lcd_speed) +{ + u16 an_lp_status; + s32 status; + u16 word = hw->eeprom.ctrl_word_3; + + *lcd_speed = IXGBE_LINK_SPEED_UNKNOWN; + + status = hw->phy.ops.read_reg(hw, IXGBE_AUTO_NEG_LP_STATUS, + IXGBE_MDIO_AUTO_NEG_DEV_TYPE, + &an_lp_status); + if (status) + return status; + + /* If link partner advertised 1G, return 1G */ + if (an_lp_status & IXGBE_AUTO_NEG_LP_1000BASE_CAP) { + *lcd_speed = IXGBE_LINK_SPEED_1GB_FULL; + return status; + } + + /* If 10G disabled for LPLU via NVM D10GMP, then return no valid LCD */ + if ((hw->bus.lan_id && (word & NVM_INIT_CTRL_3_D10GMP_PORT1)) || + (word & NVM_INIT_CTRL_3_D10GMP_PORT0)) + return status; + + /* Link partner not capable of lower speeds, return 10G */ + *lcd_speed = IXGBE_LINK_SPEED_10GB_FULL; + return status; +} + +/** ixgbe_enter_lplu_x550em - Transition to low power states + * @hw: pointer to hardware structure + * + * Configures Low Power Link Up on transition to low power states + * (from D0 to non-D0). Link is required to enter LPLU so avoid resetting + * the X557 PHY immediately prior to entering LPLU. + **/ +static s32 ixgbe_enter_lplu_t_x550em(struct ixgbe_hw *hw) +{ + u16 an_10g_cntl_reg, autoneg_reg, speed; + s32 status; + ixgbe_link_speed lcd_speed; + u32 save_autoneg; + bool link_up; + + /* SW LPLU not required on later HW revisions. */ + if (IXGBE_FUSES0_REV1 & IXGBE_READ_REG(hw, IXGBE_FUSES0_GROUP(0))) + return 0; + + /* If blocked by MNG FW, then don't restart AN */ + if (ixgbe_check_reset_blocked(hw)) + return 0; + + status = ixgbe_ext_phy_t_x550em_get_link(hw, &link_up); + if (status) + return status; + + status = hw->eeprom.ops.read(hw, NVM_INIT_CTRL_3, + &hw->eeprom.ctrl_word_3); + if (status) + return status; + + /* If link is down, LPLU disabled in NVM, WoL disabled, or + * manageability disabled, then force link down by entering + * low power mode. + */ + if (!link_up || !(hw->eeprom.ctrl_word_3 & NVM_INIT_CTRL_3_LPLU) || + !(hw->wol_enabled || ixgbe_mng_present(hw))) + return ixgbe_set_copper_phy_power(hw, false); + + /* Determine LCD */ + status = ixgbe_get_lcd_t_x550em(hw, &lcd_speed); + if (status) + return status; + + /* If no valid LCD link speed, then force link down and exit. */ + if (lcd_speed == IXGBE_LINK_SPEED_UNKNOWN) + return ixgbe_set_copper_phy_power(hw, false); + + status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_AUTO_NEG_VENDOR_STAT, + IXGBE_MDIO_AUTO_NEG_DEV_TYPE, + &speed); + if (status) + return status; + + /* If no link now, speed is invalid so take link down */ + status = ixgbe_ext_phy_t_x550em_get_link(hw, &link_up); + if (status) + return ixgbe_set_copper_phy_power(hw, false); + + /* clear everything but the speed bits */ + speed &= IXGBE_MDIO_AUTO_NEG_VEN_STAT_SPEED_MASK; + + /* If current speed is already LCD, then exit. */ + if (((speed == IXGBE_MDIO_AUTO_NEG_VENDOR_STATUS_1GB) && + (lcd_speed == IXGBE_LINK_SPEED_1GB_FULL)) || + ((speed == IXGBE_MDIO_AUTO_NEG_VENDOR_STATUS_10GB) && + (lcd_speed == IXGBE_LINK_SPEED_10GB_FULL))) + return status; + + /* Clear AN completed indication */ + status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_AUTO_NEG_VENDOR_TX_ALARM, + IXGBE_MDIO_AUTO_NEG_DEV_TYPE, + &autoneg_reg); + if (status) + return status; + + status = hw->phy.ops.read_reg(hw, IXGBE_MII_10GBASE_T_AUTONEG_CTRL_REG, + IXGBE_MDIO_AUTO_NEG_DEV_TYPE, + &an_10g_cntl_reg); + if (status) + return status; + + status = hw->phy.ops.read_reg(hw, + IXGBE_MII_AUTONEG_VENDOR_PROVISION_1_REG, + IXGBE_MDIO_AUTO_NEG_DEV_TYPE, + &autoneg_reg); + if (status) + return status; + + save_autoneg = hw->phy.autoneg_advertised; + + /* Setup link at least common link speed */ + status = hw->mac.ops.setup_link(hw, lcd_speed, false); + + /* restore autoneg from before setting lplu speed */ + hw->phy.autoneg_advertised = save_autoneg; + + return status; +} + /** ixgbe_init_phy_ops_X550em - PHY/SFP specific init * @hw: pointer to hardware structure * @@ -1098,25 +1969,32 @@ static s32 ixgbe_setup_internal_phy_x550em(struct ixgbe_hw *hw) static s32 ixgbe_init_phy_ops_X550em(struct ixgbe_hw *hw) { struct ixgbe_phy_info *phy = &hw->phy; + ixgbe_link_speed speed; s32 ret_val; - u32 esdp; - if (hw->device_id == IXGBE_DEV_ID_X550EM_X_SFP) { - esdp = IXGBE_READ_REG(hw, IXGBE_ESDP); - phy->phy_semaphore_mask = IXGBE_GSSR_SHARED_I2C_SM; + hw->mac.ops.set_lan_id(hw); - if (hw->bus.lan_id) { - esdp &= ~(IXGBE_ESDP_SDP1_NATIVE | IXGBE_ESDP_SDP1); - esdp |= IXGBE_ESDP_SDP1_DIR; + if (hw->mac.ops.get_media_type(hw) == ixgbe_media_type_fiber) { + phy->phy_semaphore_mask = IXGBE_GSSR_SHARED_I2C_SM; + ixgbe_setup_mux_ctl(hw); + + /* Save NW management interface connected on board. This is used + * to determine internal PHY mode. + */ + phy->nw_mng_if_sel = IXGBE_READ_REG(hw, IXGBE_NW_MNG_IF_SEL); + + /* If internal PHY mode is KR, then initialize KR link */ + if (phy->nw_mng_if_sel & IXGBE_NW_MNG_IF_SEL_INT_PHY_MODE) { + speed = IXGBE_LINK_SPEED_10GB_FULL | + IXGBE_LINK_SPEED_1GB_FULL; + ret_val = ixgbe_setup_kr_speed_x550em(hw, speed); } - esdp &= ~(IXGBE_ESDP_SDP0_NATIVE | IXGBE_ESDP_SDP0_DIR); - IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp); } /* Identify the PHY or SFP module */ ret_val = phy->ops.identify(hw); - /* Setup function pointers based on detected SFP module and speeds */ + /* Setup function pointers based on detected hardware */ ixgbe_init_mac_link_ops_X550em(hw); if (phy->sfp_type != ixgbe_sfp_type_unknown) phy->ops.reset = NULL; @@ -1134,11 +2012,35 @@ static s32 ixgbe_init_phy_ops_X550em(struct ixgbe_hw *hw) phy->ops.write_reg = ixgbe_write_phy_reg_x550em; break; case ixgbe_phy_x550em_ext_t: - phy->ops.setup_internal_link = ixgbe_setup_internal_phy_x550em; + /* Save NW management interface connected on board. This is used + * to determine internal PHY mode + */ + phy->nw_mng_if_sel = IXGBE_READ_REG(hw, IXGBE_NW_MNG_IF_SEL); + + /* If internal link mode is XFI, then setup iXFI internal link, + * else setup KR now. + */ + if (!(phy->nw_mng_if_sel & IXGBE_NW_MNG_IF_SEL_INT_PHY_MODE)) { + phy->ops.setup_internal_link = + ixgbe_setup_internal_phy_t_x550em; + } else { + speed = IXGBE_LINK_SPEED_10GB_FULL | + IXGBE_LINK_SPEED_1GB_FULL; + ret_val = ixgbe_setup_kr_speed_x550em(hw, speed); + } + + /* setup SW LPLU only for first revision */ + if (!(IXGBE_FUSES0_REV1 & IXGBE_READ_REG(hw, + IXGBE_FUSES0_GROUP(0)))) + phy->ops.enter_lplu = ixgbe_enter_lplu_t_x550em; + + phy->ops.handle_lasi = ixgbe_handle_lasi_ext_t_x550em; + phy->ops.reset = ixgbe_reset_phy_t_X550em; break; default: break; } + return ret_val; } @@ -1177,67 +2079,37 @@ static enum ixgbe_media_type ixgbe_get_media_type_X550em(struct ixgbe_hw *hw) **/ static s32 ixgbe_init_ext_t_x550em(struct ixgbe_hw *hw) { - u32 status; + s32 status; u16 reg; - u32 retries = 2; - do { - /* decrement retries counter and exit if we hit 0 */ - if (retries < 1) { - hw_dbg(hw, "External PHY not yet finished resetting."); - return IXGBE_ERR_PHY; - } - retries--; - - status = hw->phy.ops.read_reg(hw, - IXGBE_MDIO_TX_VENDOR_ALARMS_3, - IXGBE_MDIO_PMA_PMD_DEV_TYPE, - ®); - if (status) - return status; - - /* Verify PHY FW reset has completed */ - } while ((reg & IXGBE_MDIO_TX_VENDOR_ALARMS_3_RST_MASK) != 1); - - /* Set port to low power mode */ - status = hw->phy.ops.read_reg(hw, - IXGBE_MDIO_VENDOR_SPECIFIC_1_CONTROL, - IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE, - ®); - if (status) - return status; - - /* Enable the transmitter */ status = hw->phy.ops.read_reg(hw, - IXGBE_MDIO_PMD_STD_TX_DISABLE_CNTR, + IXGBE_MDIO_TX_VENDOR_ALARMS_3, IXGBE_MDIO_PMA_PMD_DEV_TYPE, ®); if (status) return status; - reg &= ~IXGBE_MDIO_PMD_GLOBAL_TX_DISABLE; + /* If PHY FW reset completed bit is set then this is the first + * SW instance after a power on so the PHY FW must be un-stalled. + */ + if (reg & IXGBE_MDIO_TX_VENDOR_ALARMS_3_RST_MASK) { + status = hw->phy.ops.read_reg(hw, + IXGBE_MDIO_GLOBAL_RES_PR_10, + IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE, + ®); + if (status) + return status; - status = hw->phy.ops.write_reg(hw, - IXGBE_MDIO_PMD_STD_TX_DISABLE_CNTR, - IXGBE_MDIO_PMA_PMD_DEV_TYPE, - reg); - if (status) - return status; + reg &= ~IXGBE_MDIO_POWER_UP_STALL; - /* Un-stall the PHY FW */ - status = hw->phy.ops.read_reg(hw, - IXGBE_MDIO_GLOBAL_RES_PR_10, - IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE, - ®); - if (status) - return status; - - reg &= ~IXGBE_MDIO_POWER_UP_STALL; + status = hw->phy.ops.write_reg(hw, + IXGBE_MDIO_GLOBAL_RES_PR_10, + IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE, + reg); + if (status) + return status; + } - status = hw->phy.ops.write_reg(hw, - IXGBE_MDIO_GLOBAL_RES_PR_10, - IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE, - reg); return status; } @@ -1254,6 +2126,7 @@ static s32 ixgbe_reset_hw_X550em(struct ixgbe_hw *hw) s32 status; u32 ctrl = 0; u32 i; + u32 hlreg0; bool link_up = false; /* Call adapter stop to disable Tx/Rx and clear interrupts */ @@ -1338,6 +2211,15 @@ mac_reset_top: hw->mac.num_rar_entries = 128; hw->mac.ops.init_rx_addrs(hw); + if (hw->device_id == IXGBE_DEV_ID_X550EM_X_10G_T) { + hlreg0 = IXGBE_READ_REG(hw, IXGBE_HLREG0); + hlreg0 &= ~IXGBE_HLREG0_MDCSPD; + IXGBE_WRITE_REG(hw, IXGBE_HLREG0, hlreg0); + } + + if (hw->device_id == IXGBE_DEV_ID_X550EM_X_SFP) + ixgbe_setup_mux_ctl(hw); + return status; } @@ -1390,6 +2272,62 @@ static void ixgbe_set_source_address_pruning_X550(struct ixgbe_hw *hw, IXGBE_WRITE_REG(hw, IXGBE_PFFLPH, (u32)(pfflp >> 32)); } +/** + * ixgbe_set_mux - Set mux for port 1 access with CS4227 + * @hw: pointer to hardware structure + * @state: set mux if 1, clear if 0 + */ +static void ixgbe_set_mux(struct ixgbe_hw *hw, u8 state) +{ + u32 esdp; + + if (!hw->bus.lan_id) + return; + esdp = IXGBE_READ_REG(hw, IXGBE_ESDP); + if (state) + esdp |= IXGBE_ESDP_SDP1; + else + esdp &= ~IXGBE_ESDP_SDP1; + IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp); + IXGBE_WRITE_FLUSH(hw); +} + +/** + * ixgbe_acquire_swfw_sync_X550em - Acquire SWFW semaphore + * @hw: pointer to hardware structure + * @mask: Mask to specify which semaphore to acquire + * + * Acquires the SWFW semaphore and sets the I2C MUX + */ +static s32 ixgbe_acquire_swfw_sync_X550em(struct ixgbe_hw *hw, u32 mask) +{ + s32 status; + + status = ixgbe_acquire_swfw_sync_X540(hw, mask); + if (status) + return status; + + if (mask & IXGBE_GSSR_I2C_MASK) + ixgbe_set_mux(hw, 1); + + return 0; +} + +/** + * ixgbe_release_swfw_sync_X550em - Release SWFW semaphore + * @hw: pointer to hardware structure + * @mask: Mask to specify which semaphore to release + * + * Releases the SWFW semaphore and sets the I2C MUX + */ +static void ixgbe_release_swfw_sync_X550em(struct ixgbe_hw *hw, u32 mask) +{ + if (mask & IXGBE_GSSR_I2C_MASK) + ixgbe_set_mux(hw, 0); + + ixgbe_release_swfw_sync_X540(hw, mask); +} + #define X550_COMMON_MAC \ .init_hw = &ixgbe_init_hw_generic, \ .start_hw = &ixgbe_start_hw_X540, \ @@ -1398,7 +2336,6 @@ static void ixgbe_set_source_address_pruning_X550(struct ixgbe_hw *hw, .get_mac_addr = &ixgbe_get_mac_addr_generic, \ .get_device_caps = &ixgbe_get_device_caps_generic, \ .stop_adapter = &ixgbe_stop_adapter_generic, \ - .get_bus_info = &ixgbe_get_bus_info_generic, \ .set_lan_id = &ixgbe_set_lan_id_multi_port_pcie, \ .read_analog_reg8 = NULL, \ .write_analog_reg8 = NULL, \ @@ -1428,8 +2365,6 @@ static void ixgbe_set_source_address_pruning_X550(struct ixgbe_hw *hw, &ixgbe_set_source_address_pruning_X550, \ .set_ethertype_anti_spoofing = \ &ixgbe_set_ethertype_anti_spoofing_X550, \ - .acquire_swfw_sync = &ixgbe_acquire_swfw_sync_X540, \ - .release_swfw_sync = &ixgbe_release_swfw_sync_X540, \ .disable_rx_buff = &ixgbe_disable_rx_buff_generic, \ .enable_rx_buff = &ixgbe_enable_rx_buff_generic, \ .get_thermal_sensor_data = NULL, \ @@ -1447,7 +2382,10 @@ static struct ixgbe_mac_operations mac_ops_X550 = { .get_wwn_prefix = &ixgbe_get_wwn_prefix_generic, .setup_link = &ixgbe_setup_mac_link_X540, .get_link_capabilities = &ixgbe_get_copper_link_capabilities_generic, + .get_bus_info = &ixgbe_get_bus_info_generic, .setup_sfp = NULL, + .acquire_swfw_sync = &ixgbe_acquire_swfw_sync_X540, + .release_swfw_sync = &ixgbe_release_swfw_sync_X540, }; static struct ixgbe_mac_operations mac_ops_X550EM_x = { @@ -1458,8 +2396,10 @@ static struct ixgbe_mac_operations mac_ops_X550EM_x = { .get_wwn_prefix = NULL, .setup_link = NULL, /* defined later */ .get_link_capabilities = &ixgbe_get_link_capabilities_X550em, + .get_bus_info = &ixgbe_get_bus_info_X550em, .setup_sfp = ixgbe_setup_sfp_modules_X550em, - + .acquire_swfw_sync = &ixgbe_acquire_swfw_sync_X550em, + .release_swfw_sync = &ixgbe_release_swfw_sync_X550em, }; #define X550_COMMON_EEP \ @@ -1490,6 +2430,10 @@ static struct ixgbe_eeprom_operations eeprom_ops_X550EM_x = { .read_i2c_sff8472 = &ixgbe_read_i2c_sff8472_generic, \ .read_i2c_eeprom = &ixgbe_read_i2c_eeprom_generic, \ .write_i2c_eeprom = &ixgbe_write_i2c_eeprom_generic, \ + .read_reg = &ixgbe_read_phy_reg_generic, \ + .write_reg = &ixgbe_write_phy_reg_generic, \ + .setup_link = &ixgbe_setup_phy_link_generic, \ + .set_phy_power = NULL, \ .check_overtemp = &ixgbe_tn_check_overtemp, \ .get_firmware_version = &ixgbe_get_phy_firmware_version_generic, @@ -1497,20 +2441,25 @@ static struct ixgbe_phy_operations phy_ops_X550 = { X550_COMMON_PHY .init = NULL, .identify = &ixgbe_identify_phy_generic, - .read_reg = &ixgbe_read_phy_reg_generic, - .write_reg = &ixgbe_write_phy_reg_generic, - .setup_link = &ixgbe_setup_phy_link_generic, - .read_i2c_combined = &ixgbe_read_i2c_combined_generic, - .write_i2c_combined = &ixgbe_write_i2c_combined_generic, }; static struct ixgbe_phy_operations phy_ops_X550EM_x = { X550_COMMON_PHY .init = &ixgbe_init_phy_ops_X550em, .identify = &ixgbe_identify_phy_x550em, - .read_reg = NULL, /* defined later */ - .write_reg = NULL, /* defined later */ - .setup_link = NULL, /* defined later */ + .read_i2c_combined = &ixgbe_read_i2c_combined_generic, + .write_i2c_combined = &ixgbe_write_i2c_combined_generic, + .read_i2c_combined_unlocked = &ixgbe_read_i2c_combined_generic_unlocked, + .write_i2c_combined_unlocked = + &ixgbe_write_i2c_combined_generic_unlocked, +}; + +static const u32 ixgbe_mvals_X550[IXGBE_MVALS_IDX_LIMIT] = { + IXGBE_MVALS_INIT(X550) +}; + +static const u32 ixgbe_mvals_X550EM_x[IXGBE_MVALS_IDX_LIMIT] = { + IXGBE_MVALS_INIT(X550EM_x) }; struct ixgbe_info ixgbe_X550_info = { @@ -1520,13 +2469,15 @@ struct ixgbe_info ixgbe_X550_info = { .eeprom_ops = &eeprom_ops_X550, .phy_ops = &phy_ops_X550, .mbx_ops = &mbx_ops_generic, + .mvals = ixgbe_mvals_X550, }; struct ixgbe_info ixgbe_X550EM_x_info = { .mac = ixgbe_mac_X550EM_x, - .get_invariants = &ixgbe_get_invariants_X540, + .get_invariants = &ixgbe_get_invariants_X550_x, .mac_ops = &mac_ops_X550EM_x, .eeprom_ops = &eeprom_ops_X550EM_x, .phy_ops = &phy_ops_X550EM_x, .mbx_ops = &mbx_ops_generic, + .mvals = ixgbe_mvals_X550EM_x, }; |