summaryrefslogtreecommitdiffstats
path: root/kernel/drivers/net/ethernet/intel/ixgb
diff options
context:
space:
mode:
Diffstat (limited to 'kernel/drivers/net/ethernet/intel/ixgb')
-rw-r--r--kernel/drivers/net/ethernet/intel/ixgb/Makefile35
-rw-r--r--kernel/drivers/net/ethernet/intel/ixgb/ixgb.h206
-rw-r--r--kernel/drivers/net/ethernet/intel/ixgb/ixgb_ee.c605
-rw-r--r--kernel/drivers/net/ethernet/intel/ixgb/ixgb_ee.h104
-rw-r--r--kernel/drivers/net/ethernet/intel/ixgb/ixgb_ethtool.c660
-rw-r--r--kernel/drivers/net/ethernet/intel/ixgb/ixgb_hw.c1263
-rw-r--r--kernel/drivers/net/ethernet/intel/ixgb/ixgb_hw.h792
-rw-r--r--kernel/drivers/net/ethernet/intel/ixgb/ixgb_ids.h48
-rw-r--r--kernel/drivers/net/ethernet/intel/ixgb/ixgb_main.c2368
-rw-r--r--kernel/drivers/net/ethernet/intel/ixgb/ixgb_osdep.h64
-rw-r--r--kernel/drivers/net/ethernet/intel/ixgb/ixgb_param.c469
11 files changed, 6614 insertions, 0 deletions
diff --git a/kernel/drivers/net/ethernet/intel/ixgb/Makefile b/kernel/drivers/net/ethernet/intel/ixgb/Makefile
new file mode 100644
index 000000000..0b20c5e62
--- /dev/null
+++ b/kernel/drivers/net/ethernet/intel/ixgb/Makefile
@@ -0,0 +1,35 @@
+################################################################################
+#
+# Intel PRO/10GbE Linux driver
+# Copyright(c) 1999 - 2008 Intel Corporation.
+#
+# This program is free software; you can redistribute it and/or modify it
+# under the terms and conditions of the GNU General Public License,
+# version 2, as published by the Free Software Foundation.
+#
+# This program is distributed in the hope it will be useful, but WITHOUT
+# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+# FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+# more details.
+#
+# You should have received a copy of the GNU General Public License along with
+# this program; if not, write to the Free Software Foundation, Inc.,
+# 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+#
+# The full GNU General Public License is included in this distribution in
+# the file called "COPYING".
+#
+# Contact Information:
+# Linux NICS <linux.nics@intel.com>
+# e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+# Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+#
+################################################################################
+
+#
+# Makefile for the Intel(R) PRO/10GbE ethernet driver
+#
+
+obj-$(CONFIG_IXGB) += ixgb.o
+
+ixgb-objs := ixgb_main.o ixgb_hw.o ixgb_ee.o ixgb_ethtool.o ixgb_param.o
diff --git a/kernel/drivers/net/ethernet/intel/ixgb/ixgb.h b/kernel/drivers/net/ethernet/intel/ixgb/ixgb.h
new file mode 100644
index 000000000..1180cd59b
--- /dev/null
+++ b/kernel/drivers/net/ethernet/intel/ixgb/ixgb.h
@@ -0,0 +1,206 @@
+/*******************************************************************************
+
+ Intel PRO/10GbE Linux driver
+ Copyright(c) 1999 - 2008 Intel Corporation.
+
+ This program is free software; you can redistribute it and/or modify it
+ under the terms and conditions of the GNU General Public License,
+ version 2, as published by the Free Software Foundation.
+
+ This program is distributed in the hope it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ more details.
+
+ You should have received a copy of the GNU General Public License along with
+ this program; if not, write to the Free Software Foundation, Inc.,
+ 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+ The full GNU General Public License is included in this distribution in
+ the file called "COPYING".
+
+ Contact Information:
+ Linux NICS <linux.nics@intel.com>
+ e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+*******************************************************************************/
+
+#ifndef _IXGB_H_
+#define _IXGB_H_
+
+#include <linux/stddef.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <asm/byteorder.h>
+#include <linux/mm.h>
+#include <linux/errno.h>
+#include <linux/ioport.h>
+#include <linux/pci.h>
+#include <linux/kernel.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/skbuff.h>
+#include <linux/delay.h>
+#include <linux/timer.h>
+#include <linux/slab.h>
+#include <linux/vmalloc.h>
+#include <linux/interrupt.h>
+#include <linux/string.h>
+#include <linux/pagemap.h>
+#include <linux/dma-mapping.h>
+#include <linux/bitops.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <linux/capability.h>
+#include <linux/in.h>
+#include <linux/ip.h>
+#include <linux/tcp.h>
+#include <linux/udp.h>
+#include <net/pkt_sched.h>
+#include <linux/list.h>
+#include <linux/reboot.h>
+#include <net/checksum.h>
+
+#include <linux/ethtool.h>
+#include <linux/if_vlan.h>
+
+#define BAR_0 0
+#define BAR_1 1
+#define BAR_5 5
+
+struct ixgb_adapter;
+#include "ixgb_hw.h"
+#include "ixgb_ee.h"
+#include "ixgb_ids.h"
+
+/* TX/RX descriptor defines */
+#define DEFAULT_TXD 256
+#define MAX_TXD 4096
+#define MIN_TXD 64
+
+/* hardware cannot reliably support more than 512 descriptors owned by
+ * hardware descriptor cache otherwise an unreliable ring under heavy
+ * receive load may result */
+#define DEFAULT_RXD 512
+#define MAX_RXD 512
+#define MIN_RXD 64
+
+/* Supported Rx Buffer Sizes */
+#define IXGB_RXBUFFER_2048 2048
+#define IXGB_RXBUFFER_4096 4096
+#define IXGB_RXBUFFER_8192 8192
+#define IXGB_RXBUFFER_16384 16384
+
+/* How many Rx Buffers do we bundle into one write to the hardware ? */
+#define IXGB_RX_BUFFER_WRITE 8 /* Must be power of 2 */
+
+/* wrapper around a pointer to a socket buffer,
+ * so a DMA handle can be stored along with the buffer */
+struct ixgb_buffer {
+ struct sk_buff *skb;
+ dma_addr_t dma;
+ unsigned long time_stamp;
+ u16 length;
+ u16 next_to_watch;
+ u16 mapped_as_page;
+};
+
+struct ixgb_desc_ring {
+ /* pointer to the descriptor ring memory */
+ void *desc;
+ /* physical address of the descriptor ring */
+ dma_addr_t dma;
+ /* length of descriptor ring in bytes */
+ unsigned int size;
+ /* number of descriptors in the ring */
+ unsigned int count;
+ /* next descriptor to associate a buffer with */
+ unsigned int next_to_use;
+ /* next descriptor to check for DD status bit */
+ unsigned int next_to_clean;
+ /* array of buffer information structs */
+ struct ixgb_buffer *buffer_info;
+};
+
+#define IXGB_DESC_UNUSED(R) \
+ ((((R)->next_to_clean > (R)->next_to_use) ? 0 : (R)->count) + \
+ (R)->next_to_clean - (R)->next_to_use - 1)
+
+#define IXGB_GET_DESC(R, i, type) (&(((struct type *)((R).desc))[i]))
+#define IXGB_RX_DESC(R, i) IXGB_GET_DESC(R, i, ixgb_rx_desc)
+#define IXGB_TX_DESC(R, i) IXGB_GET_DESC(R, i, ixgb_tx_desc)
+#define IXGB_CONTEXT_DESC(R, i) IXGB_GET_DESC(R, i, ixgb_context_desc)
+
+/* board specific private data structure */
+
+struct ixgb_adapter {
+ struct timer_list watchdog_timer;
+ unsigned long active_vlans[BITS_TO_LONGS(VLAN_N_VID)];
+ u32 bd_number;
+ u32 rx_buffer_len;
+ u32 part_num;
+ u16 link_speed;
+ u16 link_duplex;
+ struct work_struct tx_timeout_task;
+
+ /* TX */
+ struct ixgb_desc_ring tx_ring ____cacheline_aligned_in_smp;
+ unsigned int restart_queue;
+ unsigned long timeo_start;
+ u32 tx_cmd_type;
+ u64 hw_csum_tx_good;
+ u64 hw_csum_tx_error;
+ u32 tx_int_delay;
+ u32 tx_timeout_count;
+ bool tx_int_delay_enable;
+ bool detect_tx_hung;
+
+ /* RX */
+ struct ixgb_desc_ring rx_ring;
+ u64 hw_csum_rx_error;
+ u64 hw_csum_rx_good;
+ u32 rx_int_delay;
+ bool rx_csum;
+
+ /* OS defined structs */
+ struct napi_struct napi;
+ struct net_device *netdev;
+ struct pci_dev *pdev;
+
+ /* structs defined in ixgb_hw.h */
+ struct ixgb_hw hw;
+ u16 msg_enable;
+ struct ixgb_hw_stats stats;
+ u32 alloc_rx_buff_failed;
+ bool have_msi;
+ unsigned long flags;
+};
+
+enum ixgb_state_t {
+ /* TBD
+ __IXGB_TESTING,
+ __IXGB_RESETTING,
+ */
+ __IXGB_DOWN
+};
+
+/* Exported from other modules */
+void ixgb_check_options(struct ixgb_adapter *adapter);
+void ixgb_set_ethtool_ops(struct net_device *netdev);
+extern char ixgb_driver_name[];
+extern const char ixgb_driver_version[];
+
+void ixgb_set_speed_duplex(struct net_device *netdev);
+
+int ixgb_up(struct ixgb_adapter *adapter);
+void ixgb_down(struct ixgb_adapter *adapter, bool kill_watchdog);
+void ixgb_reset(struct ixgb_adapter *adapter);
+int ixgb_setup_rx_resources(struct ixgb_adapter *adapter);
+int ixgb_setup_tx_resources(struct ixgb_adapter *adapter);
+void ixgb_free_rx_resources(struct ixgb_adapter *adapter);
+void ixgb_free_tx_resources(struct ixgb_adapter *adapter);
+void ixgb_update_stats(struct ixgb_adapter *adapter);
+
+
+#endif /* _IXGB_H_ */
diff --git a/kernel/drivers/net/ethernet/intel/ixgb/ixgb_ee.c b/kernel/drivers/net/ethernet/intel/ixgb/ixgb_ee.c
new file mode 100644
index 000000000..eca216b9b
--- /dev/null
+++ b/kernel/drivers/net/ethernet/intel/ixgb/ixgb_ee.c
@@ -0,0 +1,605 @@
+/*******************************************************************************
+
+ Intel PRO/10GbE Linux driver
+ Copyright(c) 1999 - 2008 Intel Corporation.
+
+ This program is free software; you can redistribute it and/or modify it
+ under the terms and conditions of the GNU General Public License,
+ version 2, as published by the Free Software Foundation.
+
+ This program is distributed in the hope it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ more details.
+
+ You should have received a copy of the GNU General Public License along with
+ this program; if not, write to the Free Software Foundation, Inc.,
+ 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+ The full GNU General Public License is included in this distribution in
+ the file called "COPYING".
+
+ Contact Information:
+ Linux NICS <linux.nics@intel.com>
+ e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+*******************************************************************************/
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include "ixgb_hw.h"
+#include "ixgb_ee.h"
+/* Local prototypes */
+static u16 ixgb_shift_in_bits(struct ixgb_hw *hw);
+
+static void ixgb_shift_out_bits(struct ixgb_hw *hw,
+ u16 data,
+ u16 count);
+static void ixgb_standby_eeprom(struct ixgb_hw *hw);
+
+static bool ixgb_wait_eeprom_command(struct ixgb_hw *hw);
+
+static void ixgb_cleanup_eeprom(struct ixgb_hw *hw);
+
+/******************************************************************************
+ * Raises the EEPROM's clock input.
+ *
+ * hw - Struct containing variables accessed by shared code
+ * eecd_reg - EECD's current value
+ *****************************************************************************/
+static void
+ixgb_raise_clock(struct ixgb_hw *hw,
+ u32 *eecd_reg)
+{
+ /* Raise the clock input to the EEPROM (by setting the SK bit), and then
+ * wait 50 microseconds.
+ */
+ *eecd_reg = *eecd_reg | IXGB_EECD_SK;
+ IXGB_WRITE_REG(hw, EECD, *eecd_reg);
+ IXGB_WRITE_FLUSH(hw);
+ udelay(50);
+}
+
+/******************************************************************************
+ * Lowers the EEPROM's clock input.
+ *
+ * hw - Struct containing variables accessed by shared code
+ * eecd_reg - EECD's current value
+ *****************************************************************************/
+static void
+ixgb_lower_clock(struct ixgb_hw *hw,
+ u32 *eecd_reg)
+{
+ /* Lower the clock input to the EEPROM (by clearing the SK bit), and then
+ * wait 50 microseconds.
+ */
+ *eecd_reg = *eecd_reg & ~IXGB_EECD_SK;
+ IXGB_WRITE_REG(hw, EECD, *eecd_reg);
+ IXGB_WRITE_FLUSH(hw);
+ udelay(50);
+}
+
+/******************************************************************************
+ * Shift data bits out to the EEPROM.
+ *
+ * hw - Struct containing variables accessed by shared code
+ * data - data to send to the EEPROM
+ * count - number of bits to shift out
+ *****************************************************************************/
+static void
+ixgb_shift_out_bits(struct ixgb_hw *hw,
+ u16 data,
+ u16 count)
+{
+ u32 eecd_reg;
+ u32 mask;
+
+ /* We need to shift "count" bits out to the EEPROM. So, value in the
+ * "data" parameter will be shifted out to the EEPROM one bit at a time.
+ * In order to do this, "data" must be broken down into bits.
+ */
+ mask = 0x01 << (count - 1);
+ eecd_reg = IXGB_READ_REG(hw, EECD);
+ eecd_reg &= ~(IXGB_EECD_DO | IXGB_EECD_DI);
+ do {
+ /* A "1" is shifted out to the EEPROM by setting bit "DI" to a "1",
+ * and then raising and then lowering the clock (the SK bit controls
+ * the clock input to the EEPROM). A "0" is shifted out to the EEPROM
+ * by setting "DI" to "0" and then raising and then lowering the clock.
+ */
+ eecd_reg &= ~IXGB_EECD_DI;
+
+ if (data & mask)
+ eecd_reg |= IXGB_EECD_DI;
+
+ IXGB_WRITE_REG(hw, EECD, eecd_reg);
+ IXGB_WRITE_FLUSH(hw);
+
+ udelay(50);
+
+ ixgb_raise_clock(hw, &eecd_reg);
+ ixgb_lower_clock(hw, &eecd_reg);
+
+ mask = mask >> 1;
+
+ } while (mask);
+
+ /* We leave the "DI" bit set to "0" when we leave this routine. */
+ eecd_reg &= ~IXGB_EECD_DI;
+ IXGB_WRITE_REG(hw, EECD, eecd_reg);
+}
+
+/******************************************************************************
+ * Shift data bits in from the EEPROM
+ *
+ * hw - Struct containing variables accessed by shared code
+ *****************************************************************************/
+static u16
+ixgb_shift_in_bits(struct ixgb_hw *hw)
+{
+ u32 eecd_reg;
+ u32 i;
+ u16 data;
+
+ /* In order to read a register from the EEPROM, we need to shift 16 bits
+ * in from the EEPROM. Bits are "shifted in" by raising the clock input to
+ * the EEPROM (setting the SK bit), and then reading the value of the "DO"
+ * bit. During this "shifting in" process the "DI" bit should always be
+ * clear..
+ */
+
+ eecd_reg = IXGB_READ_REG(hw, EECD);
+
+ eecd_reg &= ~(IXGB_EECD_DO | IXGB_EECD_DI);
+ data = 0;
+
+ for (i = 0; i < 16; i++) {
+ data = data << 1;
+ ixgb_raise_clock(hw, &eecd_reg);
+
+ eecd_reg = IXGB_READ_REG(hw, EECD);
+
+ eecd_reg &= ~(IXGB_EECD_DI);
+ if (eecd_reg & IXGB_EECD_DO)
+ data |= 1;
+
+ ixgb_lower_clock(hw, &eecd_reg);
+ }
+
+ return data;
+}
+
+/******************************************************************************
+ * Prepares EEPROM for access
+ *
+ * hw - Struct containing variables accessed by shared code
+ *
+ * Lowers EEPROM clock. Clears input pin. Sets the chip select pin. This
+ * function should be called before issuing a command to the EEPROM.
+ *****************************************************************************/
+static void
+ixgb_setup_eeprom(struct ixgb_hw *hw)
+{
+ u32 eecd_reg;
+
+ eecd_reg = IXGB_READ_REG(hw, EECD);
+
+ /* Clear SK and DI */
+ eecd_reg &= ~(IXGB_EECD_SK | IXGB_EECD_DI);
+ IXGB_WRITE_REG(hw, EECD, eecd_reg);
+
+ /* Set CS */
+ eecd_reg |= IXGB_EECD_CS;
+ IXGB_WRITE_REG(hw, EECD, eecd_reg);
+}
+
+/******************************************************************************
+ * Returns EEPROM to a "standby" state
+ *
+ * hw - Struct containing variables accessed by shared code
+ *****************************************************************************/
+static void
+ixgb_standby_eeprom(struct ixgb_hw *hw)
+{
+ u32 eecd_reg;
+
+ eecd_reg = IXGB_READ_REG(hw, EECD);
+
+ /* Deselect EEPROM */
+ eecd_reg &= ~(IXGB_EECD_CS | IXGB_EECD_SK);
+ IXGB_WRITE_REG(hw, EECD, eecd_reg);
+ IXGB_WRITE_FLUSH(hw);
+ udelay(50);
+
+ /* Clock high */
+ eecd_reg |= IXGB_EECD_SK;
+ IXGB_WRITE_REG(hw, EECD, eecd_reg);
+ IXGB_WRITE_FLUSH(hw);
+ udelay(50);
+
+ /* Select EEPROM */
+ eecd_reg |= IXGB_EECD_CS;
+ IXGB_WRITE_REG(hw, EECD, eecd_reg);
+ IXGB_WRITE_FLUSH(hw);
+ udelay(50);
+
+ /* Clock low */
+ eecd_reg &= ~IXGB_EECD_SK;
+ IXGB_WRITE_REG(hw, EECD, eecd_reg);
+ IXGB_WRITE_FLUSH(hw);
+ udelay(50);
+}
+
+/******************************************************************************
+ * Raises then lowers the EEPROM's clock pin
+ *
+ * hw - Struct containing variables accessed by shared code
+ *****************************************************************************/
+static void
+ixgb_clock_eeprom(struct ixgb_hw *hw)
+{
+ u32 eecd_reg;
+
+ eecd_reg = IXGB_READ_REG(hw, EECD);
+
+ /* Rising edge of clock */
+ eecd_reg |= IXGB_EECD_SK;
+ IXGB_WRITE_REG(hw, EECD, eecd_reg);
+ IXGB_WRITE_FLUSH(hw);
+ udelay(50);
+
+ /* Falling edge of clock */
+ eecd_reg &= ~IXGB_EECD_SK;
+ IXGB_WRITE_REG(hw, EECD, eecd_reg);
+ IXGB_WRITE_FLUSH(hw);
+ udelay(50);
+}
+
+/******************************************************************************
+ * Terminates a command by lowering the EEPROM's chip select pin
+ *
+ * hw - Struct containing variables accessed by shared code
+ *****************************************************************************/
+static void
+ixgb_cleanup_eeprom(struct ixgb_hw *hw)
+{
+ u32 eecd_reg;
+
+ eecd_reg = IXGB_READ_REG(hw, EECD);
+
+ eecd_reg &= ~(IXGB_EECD_CS | IXGB_EECD_DI);
+
+ IXGB_WRITE_REG(hw, EECD, eecd_reg);
+
+ ixgb_clock_eeprom(hw);
+}
+
+/******************************************************************************
+ * Waits for the EEPROM to finish the current command.
+ *
+ * hw - Struct containing variables accessed by shared code
+ *
+ * The command is done when the EEPROM's data out pin goes high.
+ *
+ * Returns:
+ * true: EEPROM data pin is high before timeout.
+ * false: Time expired.
+ *****************************************************************************/
+static bool
+ixgb_wait_eeprom_command(struct ixgb_hw *hw)
+{
+ u32 eecd_reg;
+ u32 i;
+
+ /* Toggle the CS line. This in effect tells to EEPROM to actually execute
+ * the command in question.
+ */
+ ixgb_standby_eeprom(hw);
+
+ /* Now read DO repeatedly until is high (equal to '1'). The EEPROM will
+ * signal that the command has been completed by raising the DO signal.
+ * If DO does not go high in 10 milliseconds, then error out.
+ */
+ for (i = 0; i < 200; i++) {
+ eecd_reg = IXGB_READ_REG(hw, EECD);
+
+ if (eecd_reg & IXGB_EECD_DO)
+ return true;
+
+ udelay(50);
+ }
+ ASSERT(0);
+ return false;
+}
+
+/******************************************************************************
+ * Verifies that the EEPROM has a valid checksum
+ *
+ * hw - Struct containing variables accessed by shared code
+ *
+ * Reads the first 64 16 bit words of the EEPROM and sums the values read.
+ * If the sum of the 64 16 bit words is 0xBABA, the EEPROM's checksum is
+ * valid.
+ *
+ * Returns:
+ * true: Checksum is valid
+ * false: Checksum is not valid.
+ *****************************************************************************/
+bool
+ixgb_validate_eeprom_checksum(struct ixgb_hw *hw)
+{
+ u16 checksum = 0;
+ u16 i;
+
+ for (i = 0; i < (EEPROM_CHECKSUM_REG + 1); i++)
+ checksum += ixgb_read_eeprom(hw, i);
+
+ if (checksum == (u16) EEPROM_SUM)
+ return true;
+ else
+ return false;
+}
+
+/******************************************************************************
+ * Calculates the EEPROM checksum and writes it to the EEPROM
+ *
+ * hw - Struct containing variables accessed by shared code
+ *
+ * Sums the first 63 16 bit words of the EEPROM. Subtracts the sum from 0xBABA.
+ * Writes the difference to word offset 63 of the EEPROM.
+ *****************************************************************************/
+void
+ixgb_update_eeprom_checksum(struct ixgb_hw *hw)
+{
+ u16 checksum = 0;
+ u16 i;
+
+ for (i = 0; i < EEPROM_CHECKSUM_REG; i++)
+ checksum += ixgb_read_eeprom(hw, i);
+
+ checksum = (u16) EEPROM_SUM - checksum;
+
+ ixgb_write_eeprom(hw, EEPROM_CHECKSUM_REG, checksum);
+}
+
+/******************************************************************************
+ * Writes a 16 bit word to a given offset in the EEPROM.
+ *
+ * hw - Struct containing variables accessed by shared code
+ * reg - offset within the EEPROM to be written to
+ * data - 16 bit word to be written to the EEPROM
+ *
+ * If ixgb_update_eeprom_checksum is not called after this function, the
+ * EEPROM will most likely contain an invalid checksum.
+ *
+ *****************************************************************************/
+void
+ixgb_write_eeprom(struct ixgb_hw *hw, u16 offset, u16 data)
+{
+ struct ixgb_ee_map_type *ee_map = (struct ixgb_ee_map_type *)hw->eeprom;
+
+ /* Prepare the EEPROM for writing */
+ ixgb_setup_eeprom(hw);
+
+ /* Send the 9-bit EWEN (write enable) command to the EEPROM (5-bit opcode
+ * plus 4-bit dummy). This puts the EEPROM into write/erase mode.
+ */
+ ixgb_shift_out_bits(hw, EEPROM_EWEN_OPCODE, 5);
+ ixgb_shift_out_bits(hw, 0, 4);
+
+ /* Prepare the EEPROM */
+ ixgb_standby_eeprom(hw);
+
+ /* Send the Write command (3-bit opcode + 6-bit addr) */
+ ixgb_shift_out_bits(hw, EEPROM_WRITE_OPCODE, 3);
+ ixgb_shift_out_bits(hw, offset, 6);
+
+ /* Send the data */
+ ixgb_shift_out_bits(hw, data, 16);
+
+ ixgb_wait_eeprom_command(hw);
+
+ /* Recover from write */
+ ixgb_standby_eeprom(hw);
+
+ /* Send the 9-bit EWDS (write disable) command to the EEPROM (5-bit
+ * opcode plus 4-bit dummy). This takes the EEPROM out of write/erase
+ * mode.
+ */
+ ixgb_shift_out_bits(hw, EEPROM_EWDS_OPCODE, 5);
+ ixgb_shift_out_bits(hw, 0, 4);
+
+ /* Done with writing */
+ ixgb_cleanup_eeprom(hw);
+
+ /* clear the init_ctrl_reg_1 to signify that the cache is invalidated */
+ ee_map->init_ctrl_reg_1 = cpu_to_le16(EEPROM_ICW1_SIGNATURE_CLEAR);
+}
+
+/******************************************************************************
+ * Reads a 16 bit word from the EEPROM.
+ *
+ * hw - Struct containing variables accessed by shared code
+ * offset - offset of 16 bit word in the EEPROM to read
+ *
+ * Returns:
+ * The 16-bit value read from the eeprom
+ *****************************************************************************/
+u16
+ixgb_read_eeprom(struct ixgb_hw *hw,
+ u16 offset)
+{
+ u16 data;
+
+ /* Prepare the EEPROM for reading */
+ ixgb_setup_eeprom(hw);
+
+ /* Send the READ command (opcode + addr) */
+ ixgb_shift_out_bits(hw, EEPROM_READ_OPCODE, 3);
+ /*
+ * We have a 64 word EEPROM, there are 6 address bits
+ */
+ ixgb_shift_out_bits(hw, offset, 6);
+
+ /* Read the data */
+ data = ixgb_shift_in_bits(hw);
+
+ /* End this read operation */
+ ixgb_standby_eeprom(hw);
+
+ return data;
+}
+
+/******************************************************************************
+ * Reads eeprom and stores data in shared structure.
+ * Validates eeprom checksum and eeprom signature.
+ *
+ * hw - Struct containing variables accessed by shared code
+ *
+ * Returns:
+ * true: if eeprom read is successful
+ * false: otherwise.
+ *****************************************************************************/
+bool
+ixgb_get_eeprom_data(struct ixgb_hw *hw)
+{
+ u16 i;
+ u16 checksum = 0;
+ struct ixgb_ee_map_type *ee_map;
+
+ ENTER();
+
+ ee_map = (struct ixgb_ee_map_type *)hw->eeprom;
+
+ pr_debug("Reading eeprom data\n");
+ for (i = 0; i < IXGB_EEPROM_SIZE ; i++) {
+ u16 ee_data;
+ ee_data = ixgb_read_eeprom(hw, i);
+ checksum += ee_data;
+ hw->eeprom[i] = cpu_to_le16(ee_data);
+ }
+
+ if (checksum != (u16) EEPROM_SUM) {
+ pr_debug("Checksum invalid\n");
+ /* clear the init_ctrl_reg_1 to signify that the cache is
+ * invalidated */
+ ee_map->init_ctrl_reg_1 = cpu_to_le16(EEPROM_ICW1_SIGNATURE_CLEAR);
+ return false;
+ }
+
+ if ((ee_map->init_ctrl_reg_1 & cpu_to_le16(EEPROM_ICW1_SIGNATURE_MASK))
+ != cpu_to_le16(EEPROM_ICW1_SIGNATURE_VALID)) {
+ pr_debug("Signature invalid\n");
+ return false;
+ }
+
+ return true;
+}
+
+/******************************************************************************
+ * Local function to check if the eeprom signature is good
+ * If the eeprom signature is good, calls ixgb)get_eeprom_data.
+ *
+ * hw - Struct containing variables accessed by shared code
+ *
+ * Returns:
+ * true: eeprom signature was good and the eeprom read was successful
+ * false: otherwise.
+ ******************************************************************************/
+static bool
+ixgb_check_and_get_eeprom_data (struct ixgb_hw* hw)
+{
+ struct ixgb_ee_map_type *ee_map = (struct ixgb_ee_map_type *)hw->eeprom;
+
+ if ((ee_map->init_ctrl_reg_1 & cpu_to_le16(EEPROM_ICW1_SIGNATURE_MASK))
+ == cpu_to_le16(EEPROM_ICW1_SIGNATURE_VALID)) {
+ return true;
+ } else {
+ return ixgb_get_eeprom_data(hw);
+ }
+}
+
+/******************************************************************************
+ * return a word from the eeprom
+ *
+ * hw - Struct containing variables accessed by shared code
+ * index - Offset of eeprom word
+ *
+ * Returns:
+ * Word at indexed offset in eeprom, if valid, 0 otherwise.
+ ******************************************************************************/
+__le16
+ixgb_get_eeprom_word(struct ixgb_hw *hw, u16 index)
+{
+
+ if (index < IXGB_EEPROM_SIZE && ixgb_check_and_get_eeprom_data(hw))
+ return hw->eeprom[index];
+
+ return 0;
+}
+
+/******************************************************************************
+ * return the mac address from EEPROM
+ *
+ * hw - Struct containing variables accessed by shared code
+ * mac_addr - Ethernet Address if EEPROM contents are valid, 0 otherwise
+ *
+ * Returns: None.
+ ******************************************************************************/
+void
+ixgb_get_ee_mac_addr(struct ixgb_hw *hw,
+ u8 *mac_addr)
+{
+ int i;
+ struct ixgb_ee_map_type *ee_map = (struct ixgb_ee_map_type *)hw->eeprom;
+
+ ENTER();
+
+ if (ixgb_check_and_get_eeprom_data(hw)) {
+ for (i = 0; i < ETH_ALEN; i++) {
+ mac_addr[i] = ee_map->mac_addr[i];
+ }
+ pr_debug("eeprom mac address = %pM\n", mac_addr);
+ }
+}
+
+
+/******************************************************************************
+ * return the Printed Board Assembly number from EEPROM
+ *
+ * hw - Struct containing variables accessed by shared code
+ *
+ * Returns:
+ * PBA number if EEPROM contents are valid, 0 otherwise
+ ******************************************************************************/
+u32
+ixgb_get_ee_pba_number(struct ixgb_hw *hw)
+{
+ if (ixgb_check_and_get_eeprom_data(hw))
+ return le16_to_cpu(hw->eeprom[EEPROM_PBA_1_2_REG])
+ | (le16_to_cpu(hw->eeprom[EEPROM_PBA_3_4_REG])<<16);
+
+ return 0;
+}
+
+
+/******************************************************************************
+ * return the Device Id from EEPROM
+ *
+ * hw - Struct containing variables accessed by shared code
+ *
+ * Returns:
+ * Device Id if EEPROM contents are valid, 0 otherwise
+ ******************************************************************************/
+u16
+ixgb_get_ee_device_id(struct ixgb_hw *hw)
+{
+ struct ixgb_ee_map_type *ee_map = (struct ixgb_ee_map_type *)hw->eeprom;
+
+ if (ixgb_check_and_get_eeprom_data(hw))
+ return le16_to_cpu(ee_map->device_id);
+
+ return 0;
+}
+
diff --git a/kernel/drivers/net/ethernet/intel/ixgb/ixgb_ee.h b/kernel/drivers/net/ethernet/intel/ixgb/ixgb_ee.h
new file mode 100644
index 000000000..5680f6431
--- /dev/null
+++ b/kernel/drivers/net/ethernet/intel/ixgb/ixgb_ee.h
@@ -0,0 +1,104 @@
+/*******************************************************************************
+
+ Intel PRO/10GbE Linux driver
+ Copyright(c) 1999 - 2008 Intel Corporation.
+
+ This program is free software; you can redistribute it and/or modify it
+ under the terms and conditions of the GNU General Public License,
+ version 2, as published by the Free Software Foundation.
+
+ This program is distributed in the hope it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ more details.
+
+ You should have received a copy of the GNU General Public License along with
+ this program; if not, write to the Free Software Foundation, Inc.,
+ 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+ The full GNU General Public License is included in this distribution in
+ the file called "COPYING".
+
+ Contact Information:
+ Linux NICS <linux.nics@intel.com>
+ e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+*******************************************************************************/
+
+#ifndef _IXGB_EE_H_
+#define _IXGB_EE_H_
+
+#define IXGB_EEPROM_SIZE 64 /* Size in words */
+
+/* EEPROM Commands */
+#define EEPROM_READ_OPCODE 0x6 /* EEPROM read opcode */
+#define EEPROM_WRITE_OPCODE 0x5 /* EEPROM write opcode */
+#define EEPROM_ERASE_OPCODE 0x7 /* EEPROM erase opcode */
+#define EEPROM_EWEN_OPCODE 0x13 /* EEPROM erase/write enable */
+#define EEPROM_EWDS_OPCODE 0x10 /* EEPROM erase/write disable */
+
+/* EEPROM MAP (Word Offsets) */
+#define EEPROM_IA_1_2_REG 0x0000
+#define EEPROM_IA_3_4_REG 0x0001
+#define EEPROM_IA_5_6_REG 0x0002
+#define EEPROM_COMPATIBILITY_REG 0x0003
+#define EEPROM_PBA_1_2_REG 0x0008
+#define EEPROM_PBA_3_4_REG 0x0009
+#define EEPROM_INIT_CONTROL1_REG 0x000A
+#define EEPROM_SUBSYS_ID_REG 0x000B
+#define EEPROM_SUBVEND_ID_REG 0x000C
+#define EEPROM_DEVICE_ID_REG 0x000D
+#define EEPROM_VENDOR_ID_REG 0x000E
+#define EEPROM_INIT_CONTROL2_REG 0x000F
+#define EEPROM_SWDPINS_REG 0x0020
+#define EEPROM_CIRCUIT_CTRL_REG 0x0021
+#define EEPROM_D0_D3_POWER_REG 0x0022
+#define EEPROM_FLASH_VERSION 0x0032
+#define EEPROM_CHECKSUM_REG 0x003F
+
+/* Mask bits for fields in Word 0x0a of the EEPROM */
+
+#define EEPROM_ICW1_SIGNATURE_MASK 0xC000
+#define EEPROM_ICW1_SIGNATURE_VALID 0x4000
+#define EEPROM_ICW1_SIGNATURE_CLEAR 0x0000
+
+/* For checksumming, the sum of all words in the EEPROM should equal 0xBABA. */
+#define EEPROM_SUM 0xBABA
+
+/* EEPROM Map Sizes (Byte Counts) */
+#define PBA_SIZE 4
+
+/* EEPROM Map defines (WORD OFFSETS)*/
+
+/* EEPROM structure */
+struct ixgb_ee_map_type {
+ u8 mac_addr[ETH_ALEN];
+ __le16 compatibility;
+ __le16 reserved1[4];
+ __le32 pba_number;
+ __le16 init_ctrl_reg_1;
+ __le16 subsystem_id;
+ __le16 subvendor_id;
+ __le16 device_id;
+ __le16 vendor_id;
+ __le16 init_ctrl_reg_2;
+ __le16 oem_reserved[16];
+ __le16 swdpins_reg;
+ __le16 circuit_ctrl_reg;
+ u8 d3_power;
+ u8 d0_power;
+ __le16 reserved2[28];
+ __le16 checksum;
+};
+
+/* EEPROM Functions */
+u16 ixgb_read_eeprom(struct ixgb_hw *hw, u16 reg);
+
+bool ixgb_validate_eeprom_checksum(struct ixgb_hw *hw);
+
+void ixgb_update_eeprom_checksum(struct ixgb_hw *hw);
+
+void ixgb_write_eeprom(struct ixgb_hw *hw, u16 reg, u16 data);
+
+#endif /* IXGB_EE_H */
diff --git a/kernel/drivers/net/ethernet/intel/ixgb/ixgb_ethtool.c b/kernel/drivers/net/ethernet/intel/ixgb/ixgb_ethtool.c
new file mode 100644
index 000000000..b311e9e71
--- /dev/null
+++ b/kernel/drivers/net/ethernet/intel/ixgb/ixgb_ethtool.c
@@ -0,0 +1,660 @@
+/*******************************************************************************
+
+ Intel PRO/10GbE Linux driver
+ Copyright(c) 1999 - 2008 Intel Corporation.
+
+ This program is free software; you can redistribute it and/or modify it
+ under the terms and conditions of the GNU General Public License,
+ version 2, as published by the Free Software Foundation.
+
+ This program is distributed in the hope it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ more details.
+
+ You should have received a copy of the GNU General Public License along with
+ this program; if not, write to the Free Software Foundation, Inc.,
+ 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+ The full GNU General Public License is included in this distribution in
+ the file called "COPYING".
+
+ Contact Information:
+ Linux NICS <linux.nics@intel.com>
+ e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+*******************************************************************************/
+
+/* ethtool support for ixgb */
+
+#include "ixgb.h"
+
+#include <asm/uaccess.h>
+
+#define IXGB_ALL_RAR_ENTRIES 16
+
+enum {NETDEV_STATS, IXGB_STATS};
+
+struct ixgb_stats {
+ char stat_string[ETH_GSTRING_LEN];
+ int type;
+ int sizeof_stat;
+ int stat_offset;
+};
+
+#define IXGB_STAT(m) IXGB_STATS, \
+ FIELD_SIZEOF(struct ixgb_adapter, m), \
+ offsetof(struct ixgb_adapter, m)
+#define IXGB_NETDEV_STAT(m) NETDEV_STATS, \
+ FIELD_SIZEOF(struct net_device, m), \
+ offsetof(struct net_device, m)
+
+static struct ixgb_stats ixgb_gstrings_stats[] = {
+ {"rx_packets", IXGB_NETDEV_STAT(stats.rx_packets)},
+ {"tx_packets", IXGB_NETDEV_STAT(stats.tx_packets)},
+ {"rx_bytes", IXGB_NETDEV_STAT(stats.rx_bytes)},
+ {"tx_bytes", IXGB_NETDEV_STAT(stats.tx_bytes)},
+ {"rx_errors", IXGB_NETDEV_STAT(stats.rx_errors)},
+ {"tx_errors", IXGB_NETDEV_STAT(stats.tx_errors)},
+ {"rx_dropped", IXGB_NETDEV_STAT(stats.rx_dropped)},
+ {"tx_dropped", IXGB_NETDEV_STAT(stats.tx_dropped)},
+ {"multicast", IXGB_NETDEV_STAT(stats.multicast)},
+ {"collisions", IXGB_NETDEV_STAT(stats.collisions)},
+
+/* { "rx_length_errors", IXGB_NETDEV_STAT(stats.rx_length_errors) }, */
+ {"rx_over_errors", IXGB_NETDEV_STAT(stats.rx_over_errors)},
+ {"rx_crc_errors", IXGB_NETDEV_STAT(stats.rx_crc_errors)},
+ {"rx_frame_errors", IXGB_NETDEV_STAT(stats.rx_frame_errors)},
+ {"rx_no_buffer_count", IXGB_STAT(stats.rnbc)},
+ {"rx_fifo_errors", IXGB_NETDEV_STAT(stats.rx_fifo_errors)},
+ {"rx_missed_errors", IXGB_NETDEV_STAT(stats.rx_missed_errors)},
+ {"tx_aborted_errors", IXGB_NETDEV_STAT(stats.tx_aborted_errors)},
+ {"tx_carrier_errors", IXGB_NETDEV_STAT(stats.tx_carrier_errors)},
+ {"tx_fifo_errors", IXGB_NETDEV_STAT(stats.tx_fifo_errors)},
+ {"tx_heartbeat_errors", IXGB_NETDEV_STAT(stats.tx_heartbeat_errors)},
+ {"tx_window_errors", IXGB_NETDEV_STAT(stats.tx_window_errors)},
+ {"tx_deferred_ok", IXGB_STAT(stats.dc)},
+ {"tx_timeout_count", IXGB_STAT(tx_timeout_count) },
+ {"tx_restart_queue", IXGB_STAT(restart_queue) },
+ {"rx_long_length_errors", IXGB_STAT(stats.roc)},
+ {"rx_short_length_errors", IXGB_STAT(stats.ruc)},
+ {"tx_tcp_seg_good", IXGB_STAT(stats.tsctc)},
+ {"tx_tcp_seg_failed", IXGB_STAT(stats.tsctfc)},
+ {"rx_flow_control_xon", IXGB_STAT(stats.xonrxc)},
+ {"rx_flow_control_xoff", IXGB_STAT(stats.xoffrxc)},
+ {"tx_flow_control_xon", IXGB_STAT(stats.xontxc)},
+ {"tx_flow_control_xoff", IXGB_STAT(stats.xofftxc)},
+ {"rx_csum_offload_good", IXGB_STAT(hw_csum_rx_good)},
+ {"rx_csum_offload_errors", IXGB_STAT(hw_csum_rx_error)},
+ {"tx_csum_offload_good", IXGB_STAT(hw_csum_tx_good)},
+ {"tx_csum_offload_errors", IXGB_STAT(hw_csum_tx_error)}
+};
+
+#define IXGB_STATS_LEN ARRAY_SIZE(ixgb_gstrings_stats)
+
+static int
+ixgb_get_settings(struct net_device *netdev, struct ethtool_cmd *ecmd)
+{
+ struct ixgb_adapter *adapter = netdev_priv(netdev);
+
+ ecmd->supported = (SUPPORTED_10000baseT_Full | SUPPORTED_FIBRE);
+ ecmd->advertising = (ADVERTISED_10000baseT_Full | ADVERTISED_FIBRE);
+ ecmd->port = PORT_FIBRE;
+ ecmd->transceiver = XCVR_EXTERNAL;
+
+ if (netif_carrier_ok(adapter->netdev)) {
+ ethtool_cmd_speed_set(ecmd, SPEED_10000);
+ ecmd->duplex = DUPLEX_FULL;
+ } else {
+ ethtool_cmd_speed_set(ecmd, SPEED_UNKNOWN);
+ ecmd->duplex = DUPLEX_UNKNOWN;
+ }
+
+ ecmd->autoneg = AUTONEG_DISABLE;
+ return 0;
+}
+
+void ixgb_set_speed_duplex(struct net_device *netdev)
+{
+ struct ixgb_adapter *adapter = netdev_priv(netdev);
+ /* be optimistic about our link, since we were up before */
+ adapter->link_speed = 10000;
+ adapter->link_duplex = FULL_DUPLEX;
+ netif_carrier_on(netdev);
+ netif_wake_queue(netdev);
+}
+
+static int
+ixgb_set_settings(struct net_device *netdev, struct ethtool_cmd *ecmd)
+{
+ struct ixgb_adapter *adapter = netdev_priv(netdev);
+ u32 speed = ethtool_cmd_speed(ecmd);
+
+ if (ecmd->autoneg == AUTONEG_ENABLE ||
+ (speed + ecmd->duplex != SPEED_10000 + DUPLEX_FULL))
+ return -EINVAL;
+
+ if (netif_running(adapter->netdev)) {
+ ixgb_down(adapter, true);
+ ixgb_reset(adapter);
+ ixgb_up(adapter);
+ ixgb_set_speed_duplex(netdev);
+ } else
+ ixgb_reset(adapter);
+
+ return 0;
+}
+
+static void
+ixgb_get_pauseparam(struct net_device *netdev,
+ struct ethtool_pauseparam *pause)
+{
+ struct ixgb_adapter *adapter = netdev_priv(netdev);
+ struct ixgb_hw *hw = &adapter->hw;
+
+ pause->autoneg = AUTONEG_DISABLE;
+
+ if (hw->fc.type == ixgb_fc_rx_pause)
+ pause->rx_pause = 1;
+ else if (hw->fc.type == ixgb_fc_tx_pause)
+ pause->tx_pause = 1;
+ else if (hw->fc.type == ixgb_fc_full) {
+ pause->rx_pause = 1;
+ pause->tx_pause = 1;
+ }
+}
+
+static int
+ixgb_set_pauseparam(struct net_device *netdev,
+ struct ethtool_pauseparam *pause)
+{
+ struct ixgb_adapter *adapter = netdev_priv(netdev);
+ struct ixgb_hw *hw = &adapter->hw;
+
+ if (pause->autoneg == AUTONEG_ENABLE)
+ return -EINVAL;
+
+ if (pause->rx_pause && pause->tx_pause)
+ hw->fc.type = ixgb_fc_full;
+ else if (pause->rx_pause && !pause->tx_pause)
+ hw->fc.type = ixgb_fc_rx_pause;
+ else if (!pause->rx_pause && pause->tx_pause)
+ hw->fc.type = ixgb_fc_tx_pause;
+ else if (!pause->rx_pause && !pause->tx_pause)
+ hw->fc.type = ixgb_fc_none;
+
+ if (netif_running(adapter->netdev)) {
+ ixgb_down(adapter, true);
+ ixgb_up(adapter);
+ ixgb_set_speed_duplex(netdev);
+ } else
+ ixgb_reset(adapter);
+
+ return 0;
+}
+
+static u32
+ixgb_get_msglevel(struct net_device *netdev)
+{
+ struct ixgb_adapter *adapter = netdev_priv(netdev);
+ return adapter->msg_enable;
+}
+
+static void
+ixgb_set_msglevel(struct net_device *netdev, u32 data)
+{
+ struct ixgb_adapter *adapter = netdev_priv(netdev);
+ adapter->msg_enable = data;
+}
+#define IXGB_GET_STAT(_A_, _R_) _A_->stats._R_
+
+static int
+ixgb_get_regs_len(struct net_device *netdev)
+{
+#define IXGB_REG_DUMP_LEN 136*sizeof(u32)
+ return IXGB_REG_DUMP_LEN;
+}
+
+static void
+ixgb_get_regs(struct net_device *netdev,
+ struct ethtool_regs *regs, void *p)
+{
+ struct ixgb_adapter *adapter = netdev_priv(netdev);
+ struct ixgb_hw *hw = &adapter->hw;
+ u32 *reg = p;
+ u32 *reg_start = reg;
+ u8 i;
+
+ /* the 1 (one) below indicates an attempt at versioning, if the
+ * interface in ethtool or the driver changes, this 1 should be
+ * incremented */
+ regs->version = (1<<24) | hw->revision_id << 16 | hw->device_id;
+
+ /* General Registers */
+ *reg++ = IXGB_READ_REG(hw, CTRL0); /* 0 */
+ *reg++ = IXGB_READ_REG(hw, CTRL1); /* 1 */
+ *reg++ = IXGB_READ_REG(hw, STATUS); /* 2 */
+ *reg++ = IXGB_READ_REG(hw, EECD); /* 3 */
+ *reg++ = IXGB_READ_REG(hw, MFS); /* 4 */
+
+ /* Interrupt */
+ *reg++ = IXGB_READ_REG(hw, ICR); /* 5 */
+ *reg++ = IXGB_READ_REG(hw, ICS); /* 6 */
+ *reg++ = IXGB_READ_REG(hw, IMS); /* 7 */
+ *reg++ = IXGB_READ_REG(hw, IMC); /* 8 */
+
+ /* Receive */
+ *reg++ = IXGB_READ_REG(hw, RCTL); /* 9 */
+ *reg++ = IXGB_READ_REG(hw, FCRTL); /* 10 */
+ *reg++ = IXGB_READ_REG(hw, FCRTH); /* 11 */
+ *reg++ = IXGB_READ_REG(hw, RDBAL); /* 12 */
+ *reg++ = IXGB_READ_REG(hw, RDBAH); /* 13 */
+ *reg++ = IXGB_READ_REG(hw, RDLEN); /* 14 */
+ *reg++ = IXGB_READ_REG(hw, RDH); /* 15 */
+ *reg++ = IXGB_READ_REG(hw, RDT); /* 16 */
+ *reg++ = IXGB_READ_REG(hw, RDTR); /* 17 */
+ *reg++ = IXGB_READ_REG(hw, RXDCTL); /* 18 */
+ *reg++ = IXGB_READ_REG(hw, RAIDC); /* 19 */
+ *reg++ = IXGB_READ_REG(hw, RXCSUM); /* 20 */
+
+ /* there are 16 RAR entries in hardware, we only use 3 */
+ for (i = 0; i < IXGB_ALL_RAR_ENTRIES; i++) {
+ *reg++ = IXGB_READ_REG_ARRAY(hw, RAL, (i << 1)); /*21,...,51 */
+ *reg++ = IXGB_READ_REG_ARRAY(hw, RAH, (i << 1)); /*22,...,52 */
+ }
+
+ /* Transmit */
+ *reg++ = IXGB_READ_REG(hw, TCTL); /* 53 */
+ *reg++ = IXGB_READ_REG(hw, TDBAL); /* 54 */
+ *reg++ = IXGB_READ_REG(hw, TDBAH); /* 55 */
+ *reg++ = IXGB_READ_REG(hw, TDLEN); /* 56 */
+ *reg++ = IXGB_READ_REG(hw, TDH); /* 57 */
+ *reg++ = IXGB_READ_REG(hw, TDT); /* 58 */
+ *reg++ = IXGB_READ_REG(hw, TIDV); /* 59 */
+ *reg++ = IXGB_READ_REG(hw, TXDCTL); /* 60 */
+ *reg++ = IXGB_READ_REG(hw, TSPMT); /* 61 */
+ *reg++ = IXGB_READ_REG(hw, PAP); /* 62 */
+
+ /* Physical */
+ *reg++ = IXGB_READ_REG(hw, PCSC1); /* 63 */
+ *reg++ = IXGB_READ_REG(hw, PCSC2); /* 64 */
+ *reg++ = IXGB_READ_REG(hw, PCSS1); /* 65 */
+ *reg++ = IXGB_READ_REG(hw, PCSS2); /* 66 */
+ *reg++ = IXGB_READ_REG(hw, XPCSS); /* 67 */
+ *reg++ = IXGB_READ_REG(hw, UCCR); /* 68 */
+ *reg++ = IXGB_READ_REG(hw, XPCSTC); /* 69 */
+ *reg++ = IXGB_READ_REG(hw, MACA); /* 70 */
+ *reg++ = IXGB_READ_REG(hw, APAE); /* 71 */
+ *reg++ = IXGB_READ_REG(hw, ARD); /* 72 */
+ *reg++ = IXGB_READ_REG(hw, AIS); /* 73 */
+ *reg++ = IXGB_READ_REG(hw, MSCA); /* 74 */
+ *reg++ = IXGB_READ_REG(hw, MSRWD); /* 75 */
+
+ /* Statistics */
+ *reg++ = IXGB_GET_STAT(adapter, tprl); /* 76 */
+ *reg++ = IXGB_GET_STAT(adapter, tprh); /* 77 */
+ *reg++ = IXGB_GET_STAT(adapter, gprcl); /* 78 */
+ *reg++ = IXGB_GET_STAT(adapter, gprch); /* 79 */
+ *reg++ = IXGB_GET_STAT(adapter, bprcl); /* 80 */
+ *reg++ = IXGB_GET_STAT(adapter, bprch); /* 81 */
+ *reg++ = IXGB_GET_STAT(adapter, mprcl); /* 82 */
+ *reg++ = IXGB_GET_STAT(adapter, mprch); /* 83 */
+ *reg++ = IXGB_GET_STAT(adapter, uprcl); /* 84 */
+ *reg++ = IXGB_GET_STAT(adapter, uprch); /* 85 */
+ *reg++ = IXGB_GET_STAT(adapter, vprcl); /* 86 */
+ *reg++ = IXGB_GET_STAT(adapter, vprch); /* 87 */
+ *reg++ = IXGB_GET_STAT(adapter, jprcl); /* 88 */
+ *reg++ = IXGB_GET_STAT(adapter, jprch); /* 89 */
+ *reg++ = IXGB_GET_STAT(adapter, gorcl); /* 90 */
+ *reg++ = IXGB_GET_STAT(adapter, gorch); /* 91 */
+ *reg++ = IXGB_GET_STAT(adapter, torl); /* 92 */
+ *reg++ = IXGB_GET_STAT(adapter, torh); /* 93 */
+ *reg++ = IXGB_GET_STAT(adapter, rnbc); /* 94 */
+ *reg++ = IXGB_GET_STAT(adapter, ruc); /* 95 */
+ *reg++ = IXGB_GET_STAT(adapter, roc); /* 96 */
+ *reg++ = IXGB_GET_STAT(adapter, rlec); /* 97 */
+ *reg++ = IXGB_GET_STAT(adapter, crcerrs); /* 98 */
+ *reg++ = IXGB_GET_STAT(adapter, icbc); /* 99 */
+ *reg++ = IXGB_GET_STAT(adapter, ecbc); /* 100 */
+ *reg++ = IXGB_GET_STAT(adapter, mpc); /* 101 */
+ *reg++ = IXGB_GET_STAT(adapter, tptl); /* 102 */
+ *reg++ = IXGB_GET_STAT(adapter, tpth); /* 103 */
+ *reg++ = IXGB_GET_STAT(adapter, gptcl); /* 104 */
+ *reg++ = IXGB_GET_STAT(adapter, gptch); /* 105 */
+ *reg++ = IXGB_GET_STAT(adapter, bptcl); /* 106 */
+ *reg++ = IXGB_GET_STAT(adapter, bptch); /* 107 */
+ *reg++ = IXGB_GET_STAT(adapter, mptcl); /* 108 */
+ *reg++ = IXGB_GET_STAT(adapter, mptch); /* 109 */
+ *reg++ = IXGB_GET_STAT(adapter, uptcl); /* 110 */
+ *reg++ = IXGB_GET_STAT(adapter, uptch); /* 111 */
+ *reg++ = IXGB_GET_STAT(adapter, vptcl); /* 112 */
+ *reg++ = IXGB_GET_STAT(adapter, vptch); /* 113 */
+ *reg++ = IXGB_GET_STAT(adapter, jptcl); /* 114 */
+ *reg++ = IXGB_GET_STAT(adapter, jptch); /* 115 */
+ *reg++ = IXGB_GET_STAT(adapter, gotcl); /* 116 */
+ *reg++ = IXGB_GET_STAT(adapter, gotch); /* 117 */
+ *reg++ = IXGB_GET_STAT(adapter, totl); /* 118 */
+ *reg++ = IXGB_GET_STAT(adapter, toth); /* 119 */
+ *reg++ = IXGB_GET_STAT(adapter, dc); /* 120 */
+ *reg++ = IXGB_GET_STAT(adapter, plt64c); /* 121 */
+ *reg++ = IXGB_GET_STAT(adapter, tsctc); /* 122 */
+ *reg++ = IXGB_GET_STAT(adapter, tsctfc); /* 123 */
+ *reg++ = IXGB_GET_STAT(adapter, ibic); /* 124 */
+ *reg++ = IXGB_GET_STAT(adapter, rfc); /* 125 */
+ *reg++ = IXGB_GET_STAT(adapter, lfc); /* 126 */
+ *reg++ = IXGB_GET_STAT(adapter, pfrc); /* 127 */
+ *reg++ = IXGB_GET_STAT(adapter, pftc); /* 128 */
+ *reg++ = IXGB_GET_STAT(adapter, mcfrc); /* 129 */
+ *reg++ = IXGB_GET_STAT(adapter, mcftc); /* 130 */
+ *reg++ = IXGB_GET_STAT(adapter, xonrxc); /* 131 */
+ *reg++ = IXGB_GET_STAT(adapter, xontxc); /* 132 */
+ *reg++ = IXGB_GET_STAT(adapter, xoffrxc); /* 133 */
+ *reg++ = IXGB_GET_STAT(adapter, xofftxc); /* 134 */
+ *reg++ = IXGB_GET_STAT(adapter, rjc); /* 135 */
+
+ regs->len = (reg - reg_start) * sizeof(u32);
+}
+
+static int
+ixgb_get_eeprom_len(struct net_device *netdev)
+{
+ /* return size in bytes */
+ return IXGB_EEPROM_SIZE << 1;
+}
+
+static int
+ixgb_get_eeprom(struct net_device *netdev,
+ struct ethtool_eeprom *eeprom, u8 *bytes)
+{
+ struct ixgb_adapter *adapter = netdev_priv(netdev);
+ struct ixgb_hw *hw = &adapter->hw;
+ __le16 *eeprom_buff;
+ int i, max_len, first_word, last_word;
+ int ret_val = 0;
+
+ if (eeprom->len == 0) {
+ ret_val = -EINVAL;
+ goto geeprom_error;
+ }
+
+ eeprom->magic = hw->vendor_id | (hw->device_id << 16);
+
+ max_len = ixgb_get_eeprom_len(netdev);
+
+ if (eeprom->offset > eeprom->offset + eeprom->len) {
+ ret_val = -EINVAL;
+ goto geeprom_error;
+ }
+
+ if ((eeprom->offset + eeprom->len) > max_len)
+ eeprom->len = (max_len - eeprom->offset);
+
+ first_word = eeprom->offset >> 1;
+ last_word = (eeprom->offset + eeprom->len - 1) >> 1;
+
+ eeprom_buff = kmalloc(sizeof(__le16) *
+ (last_word - first_word + 1), GFP_KERNEL);
+ if (!eeprom_buff)
+ return -ENOMEM;
+
+ /* note the eeprom was good because the driver loaded */
+ for (i = 0; i <= (last_word - first_word); i++)
+ eeprom_buff[i] = ixgb_get_eeprom_word(hw, (first_word + i));
+
+ memcpy(bytes, (u8 *)eeprom_buff + (eeprom->offset & 1), eeprom->len);
+ kfree(eeprom_buff);
+
+geeprom_error:
+ return ret_val;
+}
+
+static int
+ixgb_set_eeprom(struct net_device *netdev,
+ struct ethtool_eeprom *eeprom, u8 *bytes)
+{
+ struct ixgb_adapter *adapter = netdev_priv(netdev);
+ struct ixgb_hw *hw = &adapter->hw;
+ u16 *eeprom_buff;
+ void *ptr;
+ int max_len, first_word, last_word;
+ u16 i;
+
+ if (eeprom->len == 0)
+ return -EINVAL;
+
+ if (eeprom->magic != (hw->vendor_id | (hw->device_id << 16)))
+ return -EFAULT;
+
+ max_len = ixgb_get_eeprom_len(netdev);
+
+ if (eeprom->offset > eeprom->offset + eeprom->len)
+ return -EINVAL;
+
+ if ((eeprom->offset + eeprom->len) > max_len)
+ eeprom->len = (max_len - eeprom->offset);
+
+ first_word = eeprom->offset >> 1;
+ last_word = (eeprom->offset + eeprom->len - 1) >> 1;
+ eeprom_buff = kmalloc(max_len, GFP_KERNEL);
+ if (!eeprom_buff)
+ return -ENOMEM;
+
+ ptr = (void *)eeprom_buff;
+
+ if (eeprom->offset & 1) {
+ /* need read/modify/write of first changed EEPROM word */
+ /* only the second byte of the word is being modified */
+ eeprom_buff[0] = ixgb_read_eeprom(hw, first_word);
+ ptr++;
+ }
+ if ((eeprom->offset + eeprom->len) & 1) {
+ /* need read/modify/write of last changed EEPROM word */
+ /* only the first byte of the word is being modified */
+ eeprom_buff[last_word - first_word]
+ = ixgb_read_eeprom(hw, last_word);
+ }
+
+ memcpy(ptr, bytes, eeprom->len);
+ for (i = 0; i <= (last_word - first_word); i++)
+ ixgb_write_eeprom(hw, first_word + i, eeprom_buff[i]);
+
+ /* Update the checksum over the first part of the EEPROM if needed */
+ if (first_word <= EEPROM_CHECKSUM_REG)
+ ixgb_update_eeprom_checksum(hw);
+
+ kfree(eeprom_buff);
+ return 0;
+}
+
+static void
+ixgb_get_drvinfo(struct net_device *netdev,
+ struct ethtool_drvinfo *drvinfo)
+{
+ struct ixgb_adapter *adapter = netdev_priv(netdev);
+
+ strlcpy(drvinfo->driver, ixgb_driver_name,
+ sizeof(drvinfo->driver));
+ strlcpy(drvinfo->version, ixgb_driver_version,
+ sizeof(drvinfo->version));
+ strlcpy(drvinfo->bus_info, pci_name(adapter->pdev),
+ sizeof(drvinfo->bus_info));
+ drvinfo->n_stats = IXGB_STATS_LEN;
+ drvinfo->regdump_len = ixgb_get_regs_len(netdev);
+ drvinfo->eedump_len = ixgb_get_eeprom_len(netdev);
+}
+
+static void
+ixgb_get_ringparam(struct net_device *netdev,
+ struct ethtool_ringparam *ring)
+{
+ struct ixgb_adapter *adapter = netdev_priv(netdev);
+ struct ixgb_desc_ring *txdr = &adapter->tx_ring;
+ struct ixgb_desc_ring *rxdr = &adapter->rx_ring;
+
+ ring->rx_max_pending = MAX_RXD;
+ ring->tx_max_pending = MAX_TXD;
+ ring->rx_pending = rxdr->count;
+ ring->tx_pending = txdr->count;
+}
+
+static int
+ixgb_set_ringparam(struct net_device *netdev,
+ struct ethtool_ringparam *ring)
+{
+ struct ixgb_adapter *adapter = netdev_priv(netdev);
+ struct ixgb_desc_ring *txdr = &adapter->tx_ring;
+ struct ixgb_desc_ring *rxdr = &adapter->rx_ring;
+ struct ixgb_desc_ring tx_old, tx_new, rx_old, rx_new;
+ int err;
+
+ tx_old = adapter->tx_ring;
+ rx_old = adapter->rx_ring;
+
+ if ((ring->rx_mini_pending) || (ring->rx_jumbo_pending))
+ return -EINVAL;
+
+ if (netif_running(adapter->netdev))
+ ixgb_down(adapter, true);
+
+ rxdr->count = max(ring->rx_pending,(u32)MIN_RXD);
+ rxdr->count = min(rxdr->count,(u32)MAX_RXD);
+ rxdr->count = ALIGN(rxdr->count, IXGB_REQ_RX_DESCRIPTOR_MULTIPLE);
+
+ txdr->count = max(ring->tx_pending,(u32)MIN_TXD);
+ txdr->count = min(txdr->count,(u32)MAX_TXD);
+ txdr->count = ALIGN(txdr->count, IXGB_REQ_TX_DESCRIPTOR_MULTIPLE);
+
+ if (netif_running(adapter->netdev)) {
+ /* Try to get new resources before deleting old */
+ if ((err = ixgb_setup_rx_resources(adapter)))
+ goto err_setup_rx;
+ if ((err = ixgb_setup_tx_resources(adapter)))
+ goto err_setup_tx;
+
+ /* save the new, restore the old in order to free it,
+ * then restore the new back again */
+
+ rx_new = adapter->rx_ring;
+ tx_new = adapter->tx_ring;
+ adapter->rx_ring = rx_old;
+ adapter->tx_ring = tx_old;
+ ixgb_free_rx_resources(adapter);
+ ixgb_free_tx_resources(adapter);
+ adapter->rx_ring = rx_new;
+ adapter->tx_ring = tx_new;
+ if ((err = ixgb_up(adapter)))
+ return err;
+ ixgb_set_speed_duplex(netdev);
+ }
+
+ return 0;
+err_setup_tx:
+ ixgb_free_rx_resources(adapter);
+err_setup_rx:
+ adapter->rx_ring = rx_old;
+ adapter->tx_ring = tx_old;
+ ixgb_up(adapter);
+ return err;
+}
+
+static int
+ixgb_set_phys_id(struct net_device *netdev, enum ethtool_phys_id_state state)
+{
+ struct ixgb_adapter *adapter = netdev_priv(netdev);
+
+ switch (state) {
+ case ETHTOOL_ID_ACTIVE:
+ return 2;
+
+ case ETHTOOL_ID_ON:
+ ixgb_led_on(&adapter->hw);
+ break;
+
+ case ETHTOOL_ID_OFF:
+ case ETHTOOL_ID_INACTIVE:
+ ixgb_led_off(&adapter->hw);
+ }
+
+ return 0;
+}
+
+static int
+ixgb_get_sset_count(struct net_device *netdev, int sset)
+{
+ switch (sset) {
+ case ETH_SS_STATS:
+ return IXGB_STATS_LEN;
+ default:
+ return -EOPNOTSUPP;
+ }
+}
+
+static void
+ixgb_get_ethtool_stats(struct net_device *netdev,
+ struct ethtool_stats *stats, u64 *data)
+{
+ struct ixgb_adapter *adapter = netdev_priv(netdev);
+ int i;
+ char *p = NULL;
+
+ ixgb_update_stats(adapter);
+ for (i = 0; i < IXGB_STATS_LEN; i++) {
+ switch (ixgb_gstrings_stats[i].type) {
+ case NETDEV_STATS:
+ p = (char *) netdev +
+ ixgb_gstrings_stats[i].stat_offset;
+ break;
+ case IXGB_STATS:
+ p = (char *) adapter +
+ ixgb_gstrings_stats[i].stat_offset;
+ break;
+ }
+
+ data[i] = (ixgb_gstrings_stats[i].sizeof_stat ==
+ sizeof(u64)) ? *(u64 *)p : *(u32 *)p;
+ }
+}
+
+static void
+ixgb_get_strings(struct net_device *netdev, u32 stringset, u8 *data)
+{
+ int i;
+
+ switch(stringset) {
+ case ETH_SS_STATS:
+ for (i = 0; i < IXGB_STATS_LEN; i++) {
+ memcpy(data + i * ETH_GSTRING_LEN,
+ ixgb_gstrings_stats[i].stat_string,
+ ETH_GSTRING_LEN);
+ }
+ break;
+ }
+}
+
+static const struct ethtool_ops ixgb_ethtool_ops = {
+ .get_settings = ixgb_get_settings,
+ .set_settings = ixgb_set_settings,
+ .get_drvinfo = ixgb_get_drvinfo,
+ .get_regs_len = ixgb_get_regs_len,
+ .get_regs = ixgb_get_regs,
+ .get_link = ethtool_op_get_link,
+ .get_eeprom_len = ixgb_get_eeprom_len,
+ .get_eeprom = ixgb_get_eeprom,
+ .set_eeprom = ixgb_set_eeprom,
+ .get_ringparam = ixgb_get_ringparam,
+ .set_ringparam = ixgb_set_ringparam,
+ .get_pauseparam = ixgb_get_pauseparam,
+ .set_pauseparam = ixgb_set_pauseparam,
+ .get_msglevel = ixgb_get_msglevel,
+ .set_msglevel = ixgb_set_msglevel,
+ .get_strings = ixgb_get_strings,
+ .set_phys_id = ixgb_set_phys_id,
+ .get_sset_count = ixgb_get_sset_count,
+ .get_ethtool_stats = ixgb_get_ethtool_stats,
+};
+
+void ixgb_set_ethtool_ops(struct net_device *netdev)
+{
+ netdev->ethtool_ops = &ixgb_ethtool_ops;
+}
diff --git a/kernel/drivers/net/ethernet/intel/ixgb/ixgb_hw.c b/kernel/drivers/net/ethernet/intel/ixgb/ixgb_hw.c
new file mode 100644
index 000000000..bf9a220f7
--- /dev/null
+++ b/kernel/drivers/net/ethernet/intel/ixgb/ixgb_hw.c
@@ -0,0 +1,1263 @@
+/*******************************************************************************
+
+ Intel PRO/10GbE Linux driver
+ Copyright(c) 1999 - 2008 Intel Corporation.
+
+ This program is free software; you can redistribute it and/or modify it
+ under the terms and conditions of the GNU General Public License,
+ version 2, as published by the Free Software Foundation.
+
+ This program is distributed in the hope it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ more details.
+
+ You should have received a copy of the GNU General Public License along with
+ this program; if not, write to the Free Software Foundation, Inc.,
+ 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+ The full GNU General Public License is included in this distribution in
+ the file called "COPYING".
+
+ Contact Information:
+ Linux NICS <linux.nics@intel.com>
+ e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+*******************************************************************************/
+
+/* ixgb_hw.c
+ * Shared functions for accessing and configuring the adapter
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/pci_ids.h>
+#include "ixgb_hw.h"
+#include "ixgb_ids.h"
+
+#include <linux/etherdevice.h>
+
+/* Local function prototypes */
+
+static u32 ixgb_hash_mc_addr(struct ixgb_hw *hw, u8 * mc_addr);
+
+static void ixgb_mta_set(struct ixgb_hw *hw, u32 hash_value);
+
+static void ixgb_get_bus_info(struct ixgb_hw *hw);
+
+static bool ixgb_link_reset(struct ixgb_hw *hw);
+
+static void ixgb_optics_reset(struct ixgb_hw *hw);
+
+static void ixgb_optics_reset_bcm(struct ixgb_hw *hw);
+
+static ixgb_phy_type ixgb_identify_phy(struct ixgb_hw *hw);
+
+static void ixgb_clear_hw_cntrs(struct ixgb_hw *hw);
+
+static void ixgb_clear_vfta(struct ixgb_hw *hw);
+
+static void ixgb_init_rx_addrs(struct ixgb_hw *hw);
+
+static u16 ixgb_read_phy_reg(struct ixgb_hw *hw,
+ u32 reg_address,
+ u32 phy_address,
+ u32 device_type);
+
+static bool ixgb_setup_fc(struct ixgb_hw *hw);
+
+static bool mac_addr_valid(u8 *mac_addr);
+
+static u32 ixgb_mac_reset(struct ixgb_hw *hw)
+{
+ u32 ctrl_reg;
+
+ ctrl_reg = IXGB_CTRL0_RST |
+ IXGB_CTRL0_SDP3_DIR | /* All pins are Output=1 */
+ IXGB_CTRL0_SDP2_DIR |
+ IXGB_CTRL0_SDP1_DIR |
+ IXGB_CTRL0_SDP0_DIR |
+ IXGB_CTRL0_SDP3 | /* Initial value 1101 */
+ IXGB_CTRL0_SDP2 |
+ IXGB_CTRL0_SDP0;
+
+#ifdef HP_ZX1
+ /* Workaround for 82597EX reset errata */
+ IXGB_WRITE_REG_IO(hw, CTRL0, ctrl_reg);
+#else
+ IXGB_WRITE_REG(hw, CTRL0, ctrl_reg);
+#endif
+
+ /* Delay a few ms just to allow the reset to complete */
+ msleep(IXGB_DELAY_AFTER_RESET);
+ ctrl_reg = IXGB_READ_REG(hw, CTRL0);
+#ifdef DBG
+ /* Make sure the self-clearing global reset bit did self clear */
+ ASSERT(!(ctrl_reg & IXGB_CTRL0_RST));
+#endif
+
+ if (hw->subsystem_vendor_id == PCI_VENDOR_ID_SUN) {
+ ctrl_reg = /* Enable interrupt from XFP and SerDes */
+ IXGB_CTRL1_GPI0_EN |
+ IXGB_CTRL1_SDP6_DIR |
+ IXGB_CTRL1_SDP7_DIR |
+ IXGB_CTRL1_SDP6 |
+ IXGB_CTRL1_SDP7;
+ IXGB_WRITE_REG(hw, CTRL1, ctrl_reg);
+ ixgb_optics_reset_bcm(hw);
+ }
+
+ if (hw->phy_type == ixgb_phy_type_txn17401)
+ ixgb_optics_reset(hw);
+
+ return ctrl_reg;
+}
+
+/******************************************************************************
+ * Reset the transmit and receive units; mask and clear all interrupts.
+ *
+ * hw - Struct containing variables accessed by shared code
+ *****************************************************************************/
+bool
+ixgb_adapter_stop(struct ixgb_hw *hw)
+{
+ u32 ctrl_reg;
+ u32 icr_reg;
+
+ ENTER();
+
+ /* If we are stopped or resetting exit gracefully and wait to be
+ * started again before accessing the hardware.
+ */
+ if (hw->adapter_stopped) {
+ pr_debug("Exiting because the adapter is already stopped!!!\n");
+ return false;
+ }
+
+ /* Set the Adapter Stopped flag so other driver functions stop
+ * touching the Hardware.
+ */
+ hw->adapter_stopped = true;
+
+ /* Clear interrupt mask to stop board from generating interrupts */
+ pr_debug("Masking off all interrupts\n");
+ IXGB_WRITE_REG(hw, IMC, 0xFFFFFFFF);
+
+ /* Disable the Transmit and Receive units. Then delay to allow
+ * any pending transactions to complete before we hit the MAC with
+ * the global reset.
+ */
+ IXGB_WRITE_REG(hw, RCTL, IXGB_READ_REG(hw, RCTL) & ~IXGB_RCTL_RXEN);
+ IXGB_WRITE_REG(hw, TCTL, IXGB_READ_REG(hw, TCTL) & ~IXGB_TCTL_TXEN);
+ IXGB_WRITE_FLUSH(hw);
+ msleep(IXGB_DELAY_BEFORE_RESET);
+
+ /* Issue a global reset to the MAC. This will reset the chip's
+ * transmit, receive, DMA, and link units. It will not effect
+ * the current PCI configuration. The global reset bit is self-
+ * clearing, and should clear within a microsecond.
+ */
+ pr_debug("Issuing a global reset to MAC\n");
+
+ ctrl_reg = ixgb_mac_reset(hw);
+
+ /* Clear interrupt mask to stop board from generating interrupts */
+ pr_debug("Masking off all interrupts\n");
+ IXGB_WRITE_REG(hw, IMC, 0xffffffff);
+
+ /* Clear any pending interrupt events. */
+ icr_reg = IXGB_READ_REG(hw, ICR);
+
+ return ctrl_reg & IXGB_CTRL0_RST;
+}
+
+
+/******************************************************************************
+ * Identifies the vendor of the optics module on the adapter. The SR adapters
+ * support two different types of XPAK optics, so it is necessary to determine
+ * which optics are present before applying any optics-specific workarounds.
+ *
+ * hw - Struct containing variables accessed by shared code.
+ *
+ * Returns: the vendor of the XPAK optics module.
+ *****************************************************************************/
+static ixgb_xpak_vendor
+ixgb_identify_xpak_vendor(struct ixgb_hw *hw)
+{
+ u32 i;
+ u16 vendor_name[5];
+ ixgb_xpak_vendor xpak_vendor;
+
+ ENTER();
+
+ /* Read the first few bytes of the vendor string from the XPAK NVR
+ * registers. These are standard XENPAK/XPAK registers, so all XPAK
+ * devices should implement them. */
+ for (i = 0; i < 5; i++) {
+ vendor_name[i] = ixgb_read_phy_reg(hw,
+ MDIO_PMA_PMD_XPAK_VENDOR_NAME
+ + i, IXGB_PHY_ADDRESS,
+ MDIO_MMD_PMAPMD);
+ }
+
+ /* Determine the actual vendor */
+ if (vendor_name[0] == 'I' &&
+ vendor_name[1] == 'N' &&
+ vendor_name[2] == 'T' &&
+ vendor_name[3] == 'E' && vendor_name[4] == 'L') {
+ xpak_vendor = ixgb_xpak_vendor_intel;
+ } else {
+ xpak_vendor = ixgb_xpak_vendor_infineon;
+ }
+
+ return xpak_vendor;
+}
+
+/******************************************************************************
+ * Determine the physical layer module on the adapter.
+ *
+ * hw - Struct containing variables accessed by shared code. The device_id
+ * field must be (correctly) populated before calling this routine.
+ *
+ * Returns: the phy type of the adapter.
+ *****************************************************************************/
+static ixgb_phy_type
+ixgb_identify_phy(struct ixgb_hw *hw)
+{
+ ixgb_phy_type phy_type;
+ ixgb_xpak_vendor xpak_vendor;
+
+ ENTER();
+
+ /* Infer the transceiver/phy type from the device id */
+ switch (hw->device_id) {
+ case IXGB_DEVICE_ID_82597EX:
+ pr_debug("Identified TXN17401 optics\n");
+ phy_type = ixgb_phy_type_txn17401;
+ break;
+
+ case IXGB_DEVICE_ID_82597EX_SR:
+ /* The SR adapters carry two different types of XPAK optics
+ * modules; read the vendor identifier to determine the exact
+ * type of optics. */
+ xpak_vendor = ixgb_identify_xpak_vendor(hw);
+ if (xpak_vendor == ixgb_xpak_vendor_intel) {
+ pr_debug("Identified TXN17201 optics\n");
+ phy_type = ixgb_phy_type_txn17201;
+ } else {
+ pr_debug("Identified G6005 optics\n");
+ phy_type = ixgb_phy_type_g6005;
+ }
+ break;
+ case IXGB_DEVICE_ID_82597EX_LR:
+ pr_debug("Identified G6104 optics\n");
+ phy_type = ixgb_phy_type_g6104;
+ break;
+ case IXGB_DEVICE_ID_82597EX_CX4:
+ pr_debug("Identified CX4\n");
+ xpak_vendor = ixgb_identify_xpak_vendor(hw);
+ if (xpak_vendor == ixgb_xpak_vendor_intel) {
+ pr_debug("Identified TXN17201 optics\n");
+ phy_type = ixgb_phy_type_txn17201;
+ } else {
+ pr_debug("Identified G6005 optics\n");
+ phy_type = ixgb_phy_type_g6005;
+ }
+ break;
+ default:
+ pr_debug("Unknown physical layer module\n");
+ phy_type = ixgb_phy_type_unknown;
+ break;
+ }
+
+ /* update phy type for sun specific board */
+ if (hw->subsystem_vendor_id == PCI_VENDOR_ID_SUN)
+ phy_type = ixgb_phy_type_bcm;
+
+ return phy_type;
+}
+
+/******************************************************************************
+ * Performs basic configuration of the adapter.
+ *
+ * hw - Struct containing variables accessed by shared code
+ *
+ * Resets the controller.
+ * Reads and validates the EEPROM.
+ * Initializes the receive address registers.
+ * Initializes the multicast table.
+ * Clears all on-chip counters.
+ * Calls routine to setup flow control settings.
+ * Leaves the transmit and receive units disabled and uninitialized.
+ *
+ * Returns:
+ * true if successful,
+ * false if unrecoverable problems were encountered.
+ *****************************************************************************/
+bool
+ixgb_init_hw(struct ixgb_hw *hw)
+{
+ u32 i;
+ u32 ctrl_reg;
+ bool status;
+
+ ENTER();
+
+ /* Issue a global reset to the MAC. This will reset the chip's
+ * transmit, receive, DMA, and link units. It will not effect
+ * the current PCI configuration. The global reset bit is self-
+ * clearing, and should clear within a microsecond.
+ */
+ pr_debug("Issuing a global reset to MAC\n");
+
+ ctrl_reg = ixgb_mac_reset(hw);
+
+ pr_debug("Issuing an EE reset to MAC\n");
+#ifdef HP_ZX1
+ /* Workaround for 82597EX reset errata */
+ IXGB_WRITE_REG_IO(hw, CTRL1, IXGB_CTRL1_EE_RST);
+#else
+ IXGB_WRITE_REG(hw, CTRL1, IXGB_CTRL1_EE_RST);
+#endif
+
+ /* Delay a few ms just to allow the reset to complete */
+ msleep(IXGB_DELAY_AFTER_EE_RESET);
+
+ if (!ixgb_get_eeprom_data(hw))
+ return false;
+
+ /* Use the device id to determine the type of phy/transceiver. */
+ hw->device_id = ixgb_get_ee_device_id(hw);
+ hw->phy_type = ixgb_identify_phy(hw);
+
+ /* Setup the receive addresses.
+ * Receive Address Registers (RARs 0 - 15).
+ */
+ ixgb_init_rx_addrs(hw);
+
+ /*
+ * Check that a valid MAC address has been set.
+ * If it is not valid, we fail hardware init.
+ */
+ if (!mac_addr_valid(hw->curr_mac_addr)) {
+ pr_debug("MAC address invalid after ixgb_init_rx_addrs\n");
+ return(false);
+ }
+
+ /* tell the routines in this file they can access hardware again */
+ hw->adapter_stopped = false;
+
+ /* Fill in the bus_info structure */
+ ixgb_get_bus_info(hw);
+
+ /* Zero out the Multicast HASH table */
+ pr_debug("Zeroing the MTA\n");
+ for (i = 0; i < IXGB_MC_TBL_SIZE; i++)
+ IXGB_WRITE_REG_ARRAY(hw, MTA, i, 0);
+
+ /* Zero out the VLAN Filter Table Array */
+ ixgb_clear_vfta(hw);
+
+ /* Zero all of the hardware counters */
+ ixgb_clear_hw_cntrs(hw);
+
+ /* Call a subroutine to setup flow control. */
+ status = ixgb_setup_fc(hw);
+
+ /* 82597EX errata: Call check-for-link in case lane deskew is locked */
+ ixgb_check_for_link(hw);
+
+ return status;
+}
+
+/******************************************************************************
+ * Initializes receive address filters.
+ *
+ * hw - Struct containing variables accessed by shared code
+ *
+ * Places the MAC address in receive address register 0 and clears the rest
+ * of the receive address registers. Clears the multicast table. Assumes
+ * the receiver is in reset when the routine is called.
+ *****************************************************************************/
+static void
+ixgb_init_rx_addrs(struct ixgb_hw *hw)
+{
+ u32 i;
+
+ ENTER();
+
+ /*
+ * If the current mac address is valid, assume it is a software override
+ * to the permanent address.
+ * Otherwise, use the permanent address from the eeprom.
+ */
+ if (!mac_addr_valid(hw->curr_mac_addr)) {
+
+ /* Get the MAC address from the eeprom for later reference */
+ ixgb_get_ee_mac_addr(hw, hw->curr_mac_addr);
+
+ pr_debug("Keeping Permanent MAC Addr = %pM\n",
+ hw->curr_mac_addr);
+ } else {
+
+ /* Setup the receive address. */
+ pr_debug("Overriding MAC Address in RAR[0]\n");
+ pr_debug("New MAC Addr = %pM\n", hw->curr_mac_addr);
+
+ ixgb_rar_set(hw, hw->curr_mac_addr, 0);
+ }
+
+ /* Zero out the other 15 receive addresses. */
+ pr_debug("Clearing RAR[1-15]\n");
+ for (i = 1; i < IXGB_RAR_ENTRIES; i++) {
+ /* Write high reg first to disable the AV bit first */
+ IXGB_WRITE_REG_ARRAY(hw, RA, ((i << 1) + 1), 0);
+ IXGB_WRITE_REG_ARRAY(hw, RA, (i << 1), 0);
+ }
+}
+
+/******************************************************************************
+ * Updates the MAC's list of multicast addresses.
+ *
+ * hw - Struct containing variables accessed by shared code
+ * mc_addr_list - the list of new multicast addresses
+ * mc_addr_count - number of addresses
+ * pad - number of bytes between addresses in the list
+ *
+ * The given list replaces any existing list. Clears the last 15 receive
+ * address registers and the multicast table. Uses receive address registers
+ * for the first 15 multicast addresses, and hashes the rest into the
+ * multicast table.
+ *****************************************************************************/
+void
+ixgb_mc_addr_list_update(struct ixgb_hw *hw,
+ u8 *mc_addr_list,
+ u32 mc_addr_count,
+ u32 pad)
+{
+ u32 hash_value;
+ u32 i;
+ u32 rar_used_count = 1; /* RAR[0] is used for our MAC address */
+ u8 *mca;
+
+ ENTER();
+
+ /* Set the new number of MC addresses that we are being requested to use. */
+ hw->num_mc_addrs = mc_addr_count;
+
+ /* Clear RAR[1-15] */
+ pr_debug("Clearing RAR[1-15]\n");
+ for (i = rar_used_count; i < IXGB_RAR_ENTRIES; i++) {
+ IXGB_WRITE_REG_ARRAY(hw, RA, (i << 1), 0);
+ IXGB_WRITE_REG_ARRAY(hw, RA, ((i << 1) + 1), 0);
+ }
+
+ /* Clear the MTA */
+ pr_debug("Clearing MTA\n");
+ for (i = 0; i < IXGB_MC_TBL_SIZE; i++)
+ IXGB_WRITE_REG_ARRAY(hw, MTA, i, 0);
+
+ /* Add the new addresses */
+ mca = mc_addr_list;
+ for (i = 0; i < mc_addr_count; i++) {
+ pr_debug("Adding the multicast addresses:\n");
+ pr_debug("MC Addr #%d = %pM\n", i, mca);
+
+ /* Place this multicast address in the RAR if there is room, *
+ * else put it in the MTA
+ */
+ if (rar_used_count < IXGB_RAR_ENTRIES) {
+ ixgb_rar_set(hw, mca, rar_used_count);
+ pr_debug("Added a multicast address to RAR[%d]\n", i);
+ rar_used_count++;
+ } else {
+ hash_value = ixgb_hash_mc_addr(hw, mca);
+
+ pr_debug("Hash value = 0x%03X\n", hash_value);
+
+ ixgb_mta_set(hw, hash_value);
+ }
+
+ mca += ETH_ALEN + pad;
+ }
+
+ pr_debug("MC Update Complete\n");
+}
+
+/******************************************************************************
+ * Hashes an address to determine its location in the multicast table
+ *
+ * hw - Struct containing variables accessed by shared code
+ * mc_addr - the multicast address to hash
+ *
+ * Returns:
+ * The hash value
+ *****************************************************************************/
+static u32
+ixgb_hash_mc_addr(struct ixgb_hw *hw,
+ u8 *mc_addr)
+{
+ u32 hash_value = 0;
+
+ ENTER();
+
+ /* The portion of the address that is used for the hash table is
+ * determined by the mc_filter_type setting.
+ */
+ switch (hw->mc_filter_type) {
+ /* [0] [1] [2] [3] [4] [5]
+ * 01 AA 00 12 34 56
+ * LSB MSB - According to H/W docs */
+ case 0:
+ /* [47:36] i.e. 0x563 for above example address */
+ hash_value =
+ ((mc_addr[4] >> 4) | (((u16) mc_addr[5]) << 4));
+ break;
+ case 1: /* [46:35] i.e. 0xAC6 for above example address */
+ hash_value =
+ ((mc_addr[4] >> 3) | (((u16) mc_addr[5]) << 5));
+ break;
+ case 2: /* [45:34] i.e. 0x5D8 for above example address */
+ hash_value =
+ ((mc_addr[4] >> 2) | (((u16) mc_addr[5]) << 6));
+ break;
+ case 3: /* [43:32] i.e. 0x634 for above example address */
+ hash_value = ((mc_addr[4]) | (((u16) mc_addr[5]) << 8));
+ break;
+ default:
+ /* Invalid mc_filter_type, what should we do? */
+ pr_debug("MC filter type param set incorrectly\n");
+ ASSERT(0);
+ break;
+ }
+
+ hash_value &= 0xFFF;
+ return hash_value;
+}
+
+/******************************************************************************
+ * Sets the bit in the multicast table corresponding to the hash value.
+ *
+ * hw - Struct containing variables accessed by shared code
+ * hash_value - Multicast address hash value
+ *****************************************************************************/
+static void
+ixgb_mta_set(struct ixgb_hw *hw,
+ u32 hash_value)
+{
+ u32 hash_bit, hash_reg;
+ u32 mta_reg;
+
+ /* The MTA is a register array of 128 32-bit registers.
+ * It is treated like an array of 4096 bits. We want to set
+ * bit BitArray[hash_value]. So we figure out what register
+ * the bit is in, read it, OR in the new bit, then write
+ * back the new value. The register is determined by the
+ * upper 7 bits of the hash value and the bit within that
+ * register are determined by the lower 5 bits of the value.
+ */
+ hash_reg = (hash_value >> 5) & 0x7F;
+ hash_bit = hash_value & 0x1F;
+
+ mta_reg = IXGB_READ_REG_ARRAY(hw, MTA, hash_reg);
+
+ mta_reg |= (1 << hash_bit);
+
+ IXGB_WRITE_REG_ARRAY(hw, MTA, hash_reg, mta_reg);
+}
+
+/******************************************************************************
+ * Puts an ethernet address into a receive address register.
+ *
+ * hw - Struct containing variables accessed by shared code
+ * addr - Address to put into receive address register
+ * index - Receive address register to write
+ *****************************************************************************/
+void
+ixgb_rar_set(struct ixgb_hw *hw,
+ u8 *addr,
+ u32 index)
+{
+ u32 rar_low, rar_high;
+
+ ENTER();
+
+ /* HW expects these in little endian so we reverse the byte order
+ * from network order (big endian) to little endian
+ */
+ rar_low = ((u32) addr[0] |
+ ((u32)addr[1] << 8) |
+ ((u32)addr[2] << 16) |
+ ((u32)addr[3] << 24));
+
+ rar_high = ((u32) addr[4] |
+ ((u32)addr[5] << 8) |
+ IXGB_RAH_AV);
+
+ IXGB_WRITE_REG_ARRAY(hw, RA, (index << 1), rar_low);
+ IXGB_WRITE_REG_ARRAY(hw, RA, ((index << 1) + 1), rar_high);
+}
+
+/******************************************************************************
+ * Writes a value to the specified offset in the VLAN filter table.
+ *
+ * hw - Struct containing variables accessed by shared code
+ * offset - Offset in VLAN filer table to write
+ * value - Value to write into VLAN filter table
+ *****************************************************************************/
+void
+ixgb_write_vfta(struct ixgb_hw *hw,
+ u32 offset,
+ u32 value)
+{
+ IXGB_WRITE_REG_ARRAY(hw, VFTA, offset, value);
+}
+
+/******************************************************************************
+ * Clears the VLAN filer table
+ *
+ * hw - Struct containing variables accessed by shared code
+ *****************************************************************************/
+static void
+ixgb_clear_vfta(struct ixgb_hw *hw)
+{
+ u32 offset;
+
+ for (offset = 0; offset < IXGB_VLAN_FILTER_TBL_SIZE; offset++)
+ IXGB_WRITE_REG_ARRAY(hw, VFTA, offset, 0);
+}
+
+/******************************************************************************
+ * Configures the flow control settings based on SW configuration.
+ *
+ * hw - Struct containing variables accessed by shared code
+ *****************************************************************************/
+
+static bool
+ixgb_setup_fc(struct ixgb_hw *hw)
+{
+ u32 ctrl_reg;
+ u32 pap_reg = 0; /* by default, assume no pause time */
+ bool status = true;
+
+ ENTER();
+
+ /* Get the current control reg 0 settings */
+ ctrl_reg = IXGB_READ_REG(hw, CTRL0);
+
+ /* Clear the Receive Pause Enable and Transmit Pause Enable bits */
+ ctrl_reg &= ~(IXGB_CTRL0_RPE | IXGB_CTRL0_TPE);
+
+ /* The possible values of the "flow_control" parameter are:
+ * 0: Flow control is completely disabled
+ * 1: Rx flow control is enabled (we can receive pause frames
+ * but not send pause frames).
+ * 2: Tx flow control is enabled (we can send pause frames
+ * but we do not support receiving pause frames).
+ * 3: Both Rx and TX flow control (symmetric) are enabled.
+ * other: Invalid.
+ */
+ switch (hw->fc.type) {
+ case ixgb_fc_none: /* 0 */
+ /* Set CMDC bit to disable Rx Flow control */
+ ctrl_reg |= (IXGB_CTRL0_CMDC);
+ break;
+ case ixgb_fc_rx_pause: /* 1 */
+ /* RX Flow control is enabled, and TX Flow control is
+ * disabled.
+ */
+ ctrl_reg |= (IXGB_CTRL0_RPE);
+ break;
+ case ixgb_fc_tx_pause: /* 2 */
+ /* TX Flow control is enabled, and RX Flow control is
+ * disabled, by a software over-ride.
+ */
+ ctrl_reg |= (IXGB_CTRL0_TPE);
+ pap_reg = hw->fc.pause_time;
+ break;
+ case ixgb_fc_full: /* 3 */
+ /* Flow control (both RX and TX) is enabled by a software
+ * over-ride.
+ */
+ ctrl_reg |= (IXGB_CTRL0_RPE | IXGB_CTRL0_TPE);
+ pap_reg = hw->fc.pause_time;
+ break;
+ default:
+ /* We should never get here. The value should be 0-3. */
+ pr_debug("Flow control param set incorrectly\n");
+ ASSERT(0);
+ break;
+ }
+
+ /* Write the new settings */
+ IXGB_WRITE_REG(hw, CTRL0, ctrl_reg);
+
+ if (pap_reg != 0)
+ IXGB_WRITE_REG(hw, PAP, pap_reg);
+
+ /* Set the flow control receive threshold registers. Normally,
+ * these registers will be set to a default threshold that may be
+ * adjusted later by the driver's runtime code. However, if the
+ * ability to transmit pause frames in not enabled, then these
+ * registers will be set to 0.
+ */
+ if (!(hw->fc.type & ixgb_fc_tx_pause)) {
+ IXGB_WRITE_REG(hw, FCRTL, 0);
+ IXGB_WRITE_REG(hw, FCRTH, 0);
+ } else {
+ /* We need to set up the Receive Threshold high and low water
+ * marks as well as (optionally) enabling the transmission of XON
+ * frames. */
+ if (hw->fc.send_xon) {
+ IXGB_WRITE_REG(hw, FCRTL,
+ (hw->fc.low_water | IXGB_FCRTL_XONE));
+ } else {
+ IXGB_WRITE_REG(hw, FCRTL, hw->fc.low_water);
+ }
+ IXGB_WRITE_REG(hw, FCRTH, hw->fc.high_water);
+ }
+ return status;
+}
+
+/******************************************************************************
+ * Reads a word from a device over the Management Data Interface (MDI) bus.
+ * This interface is used to manage Physical layer devices.
+ *
+ * hw - Struct containing variables accessed by hw code
+ * reg_address - Offset of device register being read.
+ * phy_address - Address of device on MDI.
+ *
+ * Returns: Data word (16 bits) from MDI device.
+ *
+ * The 82597EX has support for several MDI access methods. This routine
+ * uses the new protocol MDI Single Command and Address Operation.
+ * This requires that first an address cycle command is sent, followed by a
+ * read command.
+ *****************************************************************************/
+static u16
+ixgb_read_phy_reg(struct ixgb_hw *hw,
+ u32 reg_address,
+ u32 phy_address,
+ u32 device_type)
+{
+ u32 i;
+ u32 data;
+ u32 command = 0;
+
+ ASSERT(reg_address <= IXGB_MAX_PHY_REG_ADDRESS);
+ ASSERT(phy_address <= IXGB_MAX_PHY_ADDRESS);
+ ASSERT(device_type <= IXGB_MAX_PHY_DEV_TYPE);
+
+ /* Setup and write the address cycle command */
+ command = ((reg_address << IXGB_MSCA_NP_ADDR_SHIFT) |
+ (device_type << IXGB_MSCA_DEV_TYPE_SHIFT) |
+ (phy_address << IXGB_MSCA_PHY_ADDR_SHIFT) |
+ (IXGB_MSCA_ADDR_CYCLE | IXGB_MSCA_MDI_COMMAND));
+
+ IXGB_WRITE_REG(hw, MSCA, command);
+
+ /**************************************************************
+ ** Check every 10 usec to see if the address cycle completed
+ ** The COMMAND bit will clear when the operation is complete.
+ ** This may take as long as 64 usecs (we'll wait 100 usecs max)
+ ** from the CPU Write to the Ready bit assertion.
+ **************************************************************/
+
+ for (i = 0; i < 10; i++)
+ {
+ udelay(10);
+
+ command = IXGB_READ_REG(hw, MSCA);
+
+ if ((command & IXGB_MSCA_MDI_COMMAND) == 0)
+ break;
+ }
+
+ ASSERT((command & IXGB_MSCA_MDI_COMMAND) == 0);
+
+ /* Address cycle complete, setup and write the read command */
+ command = ((reg_address << IXGB_MSCA_NP_ADDR_SHIFT) |
+ (device_type << IXGB_MSCA_DEV_TYPE_SHIFT) |
+ (phy_address << IXGB_MSCA_PHY_ADDR_SHIFT) |
+ (IXGB_MSCA_READ | IXGB_MSCA_MDI_COMMAND));
+
+ IXGB_WRITE_REG(hw, MSCA, command);
+
+ /**************************************************************
+ ** Check every 10 usec to see if the read command completed
+ ** The COMMAND bit will clear when the operation is complete.
+ ** The read may take as long as 64 usecs (we'll wait 100 usecs max)
+ ** from the CPU Write to the Ready bit assertion.
+ **************************************************************/
+
+ for (i = 0; i < 10; i++)
+ {
+ udelay(10);
+
+ command = IXGB_READ_REG(hw, MSCA);
+
+ if ((command & IXGB_MSCA_MDI_COMMAND) == 0)
+ break;
+ }
+
+ ASSERT((command & IXGB_MSCA_MDI_COMMAND) == 0);
+
+ /* Operation is complete, get the data from the MDIO Read/Write Data
+ * register and return.
+ */
+ data = IXGB_READ_REG(hw, MSRWD);
+ data >>= IXGB_MSRWD_READ_DATA_SHIFT;
+ return((u16) data);
+}
+
+/******************************************************************************
+ * Writes a word to a device over the Management Data Interface (MDI) bus.
+ * This interface is used to manage Physical layer devices.
+ *
+ * hw - Struct containing variables accessed by hw code
+ * reg_address - Offset of device register being read.
+ * phy_address - Address of device on MDI.
+ * device_type - Also known as the Device ID or DID.
+ * data - 16-bit value to be written
+ *
+ * Returns: void.
+ *
+ * The 82597EX has support for several MDI access methods. This routine
+ * uses the new protocol MDI Single Command and Address Operation.
+ * This requires that first an address cycle command is sent, followed by a
+ * write command.
+ *****************************************************************************/
+static void
+ixgb_write_phy_reg(struct ixgb_hw *hw,
+ u32 reg_address,
+ u32 phy_address,
+ u32 device_type,
+ u16 data)
+{
+ u32 i;
+ u32 command = 0;
+
+ ASSERT(reg_address <= IXGB_MAX_PHY_REG_ADDRESS);
+ ASSERT(phy_address <= IXGB_MAX_PHY_ADDRESS);
+ ASSERT(device_type <= IXGB_MAX_PHY_DEV_TYPE);
+
+ /* Put the data in the MDIO Read/Write Data register */
+ IXGB_WRITE_REG(hw, MSRWD, (u32)data);
+
+ /* Setup and write the address cycle command */
+ command = ((reg_address << IXGB_MSCA_NP_ADDR_SHIFT) |
+ (device_type << IXGB_MSCA_DEV_TYPE_SHIFT) |
+ (phy_address << IXGB_MSCA_PHY_ADDR_SHIFT) |
+ (IXGB_MSCA_ADDR_CYCLE | IXGB_MSCA_MDI_COMMAND));
+
+ IXGB_WRITE_REG(hw, MSCA, command);
+
+ /**************************************************************
+ ** Check every 10 usec to see if the address cycle completed
+ ** The COMMAND bit will clear when the operation is complete.
+ ** This may take as long as 64 usecs (we'll wait 100 usecs max)
+ ** from the CPU Write to the Ready bit assertion.
+ **************************************************************/
+
+ for (i = 0; i < 10; i++)
+ {
+ udelay(10);
+
+ command = IXGB_READ_REG(hw, MSCA);
+
+ if ((command & IXGB_MSCA_MDI_COMMAND) == 0)
+ break;
+ }
+
+ ASSERT((command & IXGB_MSCA_MDI_COMMAND) == 0);
+
+ /* Address cycle complete, setup and write the write command */
+ command = ((reg_address << IXGB_MSCA_NP_ADDR_SHIFT) |
+ (device_type << IXGB_MSCA_DEV_TYPE_SHIFT) |
+ (phy_address << IXGB_MSCA_PHY_ADDR_SHIFT) |
+ (IXGB_MSCA_WRITE | IXGB_MSCA_MDI_COMMAND));
+
+ IXGB_WRITE_REG(hw, MSCA, command);
+
+ /**************************************************************
+ ** Check every 10 usec to see if the read command completed
+ ** The COMMAND bit will clear when the operation is complete.
+ ** The write may take as long as 64 usecs (we'll wait 100 usecs max)
+ ** from the CPU Write to the Ready bit assertion.
+ **************************************************************/
+
+ for (i = 0; i < 10; i++)
+ {
+ udelay(10);
+
+ command = IXGB_READ_REG(hw, MSCA);
+
+ if ((command & IXGB_MSCA_MDI_COMMAND) == 0)
+ break;
+ }
+
+ ASSERT((command & IXGB_MSCA_MDI_COMMAND) == 0);
+
+ /* Operation is complete, return. */
+}
+
+/******************************************************************************
+ * Checks to see if the link status of the hardware has changed.
+ *
+ * hw - Struct containing variables accessed by hw code
+ *
+ * Called by any function that needs to check the link status of the adapter.
+ *****************************************************************************/
+void
+ixgb_check_for_link(struct ixgb_hw *hw)
+{
+ u32 status_reg;
+ u32 xpcss_reg;
+
+ ENTER();
+
+ xpcss_reg = IXGB_READ_REG(hw, XPCSS);
+ status_reg = IXGB_READ_REG(hw, STATUS);
+
+ if ((xpcss_reg & IXGB_XPCSS_ALIGN_STATUS) &&
+ (status_reg & IXGB_STATUS_LU)) {
+ hw->link_up = true;
+ } else if (!(xpcss_reg & IXGB_XPCSS_ALIGN_STATUS) &&
+ (status_reg & IXGB_STATUS_LU)) {
+ pr_debug("XPCSS Not Aligned while Status:LU is set\n");
+ hw->link_up = ixgb_link_reset(hw);
+ } else {
+ /*
+ * 82597EX errata. Since the lane deskew problem may prevent
+ * link, reset the link before reporting link down.
+ */
+ hw->link_up = ixgb_link_reset(hw);
+ }
+ /* Anything else for 10 Gig?? */
+}
+
+/******************************************************************************
+ * Check for a bad link condition that may have occurred.
+ * The indication is that the RFC / LFC registers may be incrementing
+ * continually. A full adapter reset is required to recover.
+ *
+ * hw - Struct containing variables accessed by hw code
+ *
+ * Called by any function that needs to check the link status of the adapter.
+ *****************************************************************************/
+bool ixgb_check_for_bad_link(struct ixgb_hw *hw)
+{
+ u32 newLFC, newRFC;
+ bool bad_link_returncode = false;
+
+ if (hw->phy_type == ixgb_phy_type_txn17401) {
+ newLFC = IXGB_READ_REG(hw, LFC);
+ newRFC = IXGB_READ_REG(hw, RFC);
+ if ((hw->lastLFC + 250 < newLFC)
+ || (hw->lastRFC + 250 < newRFC)) {
+ pr_debug("BAD LINK! too many LFC/RFC since last check\n");
+ bad_link_returncode = true;
+ }
+ hw->lastLFC = newLFC;
+ hw->lastRFC = newRFC;
+ }
+
+ return bad_link_returncode;
+}
+
+/******************************************************************************
+ * Clears all hardware statistics counters.
+ *
+ * hw - Struct containing variables accessed by shared code
+ *****************************************************************************/
+static void
+ixgb_clear_hw_cntrs(struct ixgb_hw *hw)
+{
+ volatile u32 temp_reg;
+
+ ENTER();
+
+ /* if we are stopped or resetting exit gracefully */
+ if (hw->adapter_stopped) {
+ pr_debug("Exiting because the adapter is stopped!!!\n");
+ return;
+ }
+
+ temp_reg = IXGB_READ_REG(hw, TPRL);
+ temp_reg = IXGB_READ_REG(hw, TPRH);
+ temp_reg = IXGB_READ_REG(hw, GPRCL);
+ temp_reg = IXGB_READ_REG(hw, GPRCH);
+ temp_reg = IXGB_READ_REG(hw, BPRCL);
+ temp_reg = IXGB_READ_REG(hw, BPRCH);
+ temp_reg = IXGB_READ_REG(hw, MPRCL);
+ temp_reg = IXGB_READ_REG(hw, MPRCH);
+ temp_reg = IXGB_READ_REG(hw, UPRCL);
+ temp_reg = IXGB_READ_REG(hw, UPRCH);
+ temp_reg = IXGB_READ_REG(hw, VPRCL);
+ temp_reg = IXGB_READ_REG(hw, VPRCH);
+ temp_reg = IXGB_READ_REG(hw, JPRCL);
+ temp_reg = IXGB_READ_REG(hw, JPRCH);
+ temp_reg = IXGB_READ_REG(hw, GORCL);
+ temp_reg = IXGB_READ_REG(hw, GORCH);
+ temp_reg = IXGB_READ_REG(hw, TORL);
+ temp_reg = IXGB_READ_REG(hw, TORH);
+ temp_reg = IXGB_READ_REG(hw, RNBC);
+ temp_reg = IXGB_READ_REG(hw, RUC);
+ temp_reg = IXGB_READ_REG(hw, ROC);
+ temp_reg = IXGB_READ_REG(hw, RLEC);
+ temp_reg = IXGB_READ_REG(hw, CRCERRS);
+ temp_reg = IXGB_READ_REG(hw, ICBC);
+ temp_reg = IXGB_READ_REG(hw, ECBC);
+ temp_reg = IXGB_READ_REG(hw, MPC);
+ temp_reg = IXGB_READ_REG(hw, TPTL);
+ temp_reg = IXGB_READ_REG(hw, TPTH);
+ temp_reg = IXGB_READ_REG(hw, GPTCL);
+ temp_reg = IXGB_READ_REG(hw, GPTCH);
+ temp_reg = IXGB_READ_REG(hw, BPTCL);
+ temp_reg = IXGB_READ_REG(hw, BPTCH);
+ temp_reg = IXGB_READ_REG(hw, MPTCL);
+ temp_reg = IXGB_READ_REG(hw, MPTCH);
+ temp_reg = IXGB_READ_REG(hw, UPTCL);
+ temp_reg = IXGB_READ_REG(hw, UPTCH);
+ temp_reg = IXGB_READ_REG(hw, VPTCL);
+ temp_reg = IXGB_READ_REG(hw, VPTCH);
+ temp_reg = IXGB_READ_REG(hw, JPTCL);
+ temp_reg = IXGB_READ_REG(hw, JPTCH);
+ temp_reg = IXGB_READ_REG(hw, GOTCL);
+ temp_reg = IXGB_READ_REG(hw, GOTCH);
+ temp_reg = IXGB_READ_REG(hw, TOTL);
+ temp_reg = IXGB_READ_REG(hw, TOTH);
+ temp_reg = IXGB_READ_REG(hw, DC);
+ temp_reg = IXGB_READ_REG(hw, PLT64C);
+ temp_reg = IXGB_READ_REG(hw, TSCTC);
+ temp_reg = IXGB_READ_REG(hw, TSCTFC);
+ temp_reg = IXGB_READ_REG(hw, IBIC);
+ temp_reg = IXGB_READ_REG(hw, RFC);
+ temp_reg = IXGB_READ_REG(hw, LFC);
+ temp_reg = IXGB_READ_REG(hw, PFRC);
+ temp_reg = IXGB_READ_REG(hw, PFTC);
+ temp_reg = IXGB_READ_REG(hw, MCFRC);
+ temp_reg = IXGB_READ_REG(hw, MCFTC);
+ temp_reg = IXGB_READ_REG(hw, XONRXC);
+ temp_reg = IXGB_READ_REG(hw, XONTXC);
+ temp_reg = IXGB_READ_REG(hw, XOFFRXC);
+ temp_reg = IXGB_READ_REG(hw, XOFFTXC);
+ temp_reg = IXGB_READ_REG(hw, RJC);
+}
+
+/******************************************************************************
+ * Turns on the software controllable LED
+ *
+ * hw - Struct containing variables accessed by shared code
+ *****************************************************************************/
+void
+ixgb_led_on(struct ixgb_hw *hw)
+{
+ u32 ctrl0_reg = IXGB_READ_REG(hw, CTRL0);
+
+ /* To turn on the LED, clear software-definable pin 0 (SDP0). */
+ ctrl0_reg &= ~IXGB_CTRL0_SDP0;
+ IXGB_WRITE_REG(hw, CTRL0, ctrl0_reg);
+}
+
+/******************************************************************************
+ * Turns off the software controllable LED
+ *
+ * hw - Struct containing variables accessed by shared code
+ *****************************************************************************/
+void
+ixgb_led_off(struct ixgb_hw *hw)
+{
+ u32 ctrl0_reg = IXGB_READ_REG(hw, CTRL0);
+
+ /* To turn off the LED, set software-definable pin 0 (SDP0). */
+ ctrl0_reg |= IXGB_CTRL0_SDP0;
+ IXGB_WRITE_REG(hw, CTRL0, ctrl0_reg);
+}
+
+/******************************************************************************
+ * Gets the current PCI bus type, speed, and width of the hardware
+ *
+ * hw - Struct containing variables accessed by shared code
+ *****************************************************************************/
+static void
+ixgb_get_bus_info(struct ixgb_hw *hw)
+{
+ u32 status_reg;
+
+ status_reg = IXGB_READ_REG(hw, STATUS);
+
+ hw->bus.type = (status_reg & IXGB_STATUS_PCIX_MODE) ?
+ ixgb_bus_type_pcix : ixgb_bus_type_pci;
+
+ if (hw->bus.type == ixgb_bus_type_pci) {
+ hw->bus.speed = (status_reg & IXGB_STATUS_PCI_SPD) ?
+ ixgb_bus_speed_66 : ixgb_bus_speed_33;
+ } else {
+ switch (status_reg & IXGB_STATUS_PCIX_SPD_MASK) {
+ case IXGB_STATUS_PCIX_SPD_66:
+ hw->bus.speed = ixgb_bus_speed_66;
+ break;
+ case IXGB_STATUS_PCIX_SPD_100:
+ hw->bus.speed = ixgb_bus_speed_100;
+ break;
+ case IXGB_STATUS_PCIX_SPD_133:
+ hw->bus.speed = ixgb_bus_speed_133;
+ break;
+ default:
+ hw->bus.speed = ixgb_bus_speed_reserved;
+ break;
+ }
+ }
+
+ hw->bus.width = (status_reg & IXGB_STATUS_BUS64) ?
+ ixgb_bus_width_64 : ixgb_bus_width_32;
+}
+
+/******************************************************************************
+ * Tests a MAC address to ensure it is a valid Individual Address
+ *
+ * mac_addr - pointer to MAC address.
+ *
+ *****************************************************************************/
+static bool
+mac_addr_valid(u8 *mac_addr)
+{
+ bool is_valid = true;
+ ENTER();
+
+ /* Make sure it is not a multicast address */
+ if (is_multicast_ether_addr(mac_addr)) {
+ pr_debug("MAC address is multicast\n");
+ is_valid = false;
+ }
+ /* Not a broadcast address */
+ else if (is_broadcast_ether_addr(mac_addr)) {
+ pr_debug("MAC address is broadcast\n");
+ is_valid = false;
+ }
+ /* Reject the zero address */
+ else if (is_zero_ether_addr(mac_addr)) {
+ pr_debug("MAC address is all zeros\n");
+ is_valid = false;
+ }
+ return is_valid;
+}
+
+/******************************************************************************
+ * Resets the 10GbE link. Waits the settle time and returns the state of
+ * the link.
+ *
+ * hw - Struct containing variables accessed by shared code
+ *****************************************************************************/
+static bool
+ixgb_link_reset(struct ixgb_hw *hw)
+{
+ bool link_status = false;
+ u8 wait_retries = MAX_RESET_ITERATIONS;
+ u8 lrst_retries = MAX_RESET_ITERATIONS;
+
+ do {
+ /* Reset the link */
+ IXGB_WRITE_REG(hw, CTRL0,
+ IXGB_READ_REG(hw, CTRL0) | IXGB_CTRL0_LRST);
+
+ /* Wait for link-up and lane re-alignment */
+ do {
+ udelay(IXGB_DELAY_USECS_AFTER_LINK_RESET);
+ link_status =
+ ((IXGB_READ_REG(hw, STATUS) & IXGB_STATUS_LU)
+ && (IXGB_READ_REG(hw, XPCSS) &
+ IXGB_XPCSS_ALIGN_STATUS)) ? true : false;
+ } while (!link_status && --wait_retries);
+
+ } while (!link_status && --lrst_retries);
+
+ return link_status;
+}
+
+/******************************************************************************
+ * Resets the 10GbE optics module.
+ *
+ * hw - Struct containing variables accessed by shared code
+ *****************************************************************************/
+static void
+ixgb_optics_reset(struct ixgb_hw *hw)
+{
+ if (hw->phy_type == ixgb_phy_type_txn17401) {
+ u16 mdio_reg;
+
+ ixgb_write_phy_reg(hw,
+ MDIO_CTRL1,
+ IXGB_PHY_ADDRESS,
+ MDIO_MMD_PMAPMD,
+ MDIO_CTRL1_RESET);
+
+ mdio_reg = ixgb_read_phy_reg(hw,
+ MDIO_CTRL1,
+ IXGB_PHY_ADDRESS,
+ MDIO_MMD_PMAPMD);
+ }
+}
+
+/******************************************************************************
+ * Resets the 10GbE optics module for Sun variant NIC.
+ *
+ * hw - Struct containing variables accessed by shared code
+ *****************************************************************************/
+
+#define IXGB_BCM8704_USER_PMD_TX_CTRL_REG 0xC803
+#define IXGB_BCM8704_USER_PMD_TX_CTRL_REG_VAL 0x0164
+#define IXGB_BCM8704_USER_CTRL_REG 0xC800
+#define IXGB_BCM8704_USER_CTRL_REG_VAL 0x7FBF
+#define IXGB_BCM8704_USER_DEV3_ADDR 0x0003
+#define IXGB_SUN_PHY_ADDRESS 0x0000
+#define IXGB_SUN_PHY_RESET_DELAY 305
+
+static void
+ixgb_optics_reset_bcm(struct ixgb_hw *hw)
+{
+ u32 ctrl = IXGB_READ_REG(hw, CTRL0);
+ ctrl &= ~IXGB_CTRL0_SDP2;
+ ctrl |= IXGB_CTRL0_SDP3;
+ IXGB_WRITE_REG(hw, CTRL0, ctrl);
+ IXGB_WRITE_FLUSH(hw);
+
+ /* SerDes needs extra delay */
+ msleep(IXGB_SUN_PHY_RESET_DELAY);
+
+ /* Broadcom 7408L configuration */
+ /* Reference clock config */
+ ixgb_write_phy_reg(hw,
+ IXGB_BCM8704_USER_PMD_TX_CTRL_REG,
+ IXGB_SUN_PHY_ADDRESS,
+ IXGB_BCM8704_USER_DEV3_ADDR,
+ IXGB_BCM8704_USER_PMD_TX_CTRL_REG_VAL);
+ /* we must read the registers twice */
+ ixgb_read_phy_reg(hw,
+ IXGB_BCM8704_USER_PMD_TX_CTRL_REG,
+ IXGB_SUN_PHY_ADDRESS,
+ IXGB_BCM8704_USER_DEV3_ADDR);
+ ixgb_read_phy_reg(hw,
+ IXGB_BCM8704_USER_PMD_TX_CTRL_REG,
+ IXGB_SUN_PHY_ADDRESS,
+ IXGB_BCM8704_USER_DEV3_ADDR);
+
+ ixgb_write_phy_reg(hw,
+ IXGB_BCM8704_USER_CTRL_REG,
+ IXGB_SUN_PHY_ADDRESS,
+ IXGB_BCM8704_USER_DEV3_ADDR,
+ IXGB_BCM8704_USER_CTRL_REG_VAL);
+ ixgb_read_phy_reg(hw,
+ IXGB_BCM8704_USER_CTRL_REG,
+ IXGB_SUN_PHY_ADDRESS,
+ IXGB_BCM8704_USER_DEV3_ADDR);
+ ixgb_read_phy_reg(hw,
+ IXGB_BCM8704_USER_CTRL_REG,
+ IXGB_SUN_PHY_ADDRESS,
+ IXGB_BCM8704_USER_DEV3_ADDR);
+
+ /* SerDes needs extra delay */
+ msleep(IXGB_SUN_PHY_RESET_DELAY);
+}
diff --git a/kernel/drivers/net/ethernet/intel/ixgb/ixgb_hw.h b/kernel/drivers/net/ethernet/intel/ixgb/ixgb_hw.h
new file mode 100644
index 000000000..0bd5d72e1
--- /dev/null
+++ b/kernel/drivers/net/ethernet/intel/ixgb/ixgb_hw.h
@@ -0,0 +1,792 @@
+/*******************************************************************************
+
+ Intel PRO/10GbE Linux driver
+ Copyright(c) 1999 - 2008 Intel Corporation.
+
+ This program is free software; you can redistribute it and/or modify it
+ under the terms and conditions of the GNU General Public License,
+ version 2, as published by the Free Software Foundation.
+
+ This program is distributed in the hope it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ more details.
+
+ You should have received a copy of the GNU General Public License along with
+ this program; if not, write to the Free Software Foundation, Inc.,
+ 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+ The full GNU General Public License is included in this distribution in
+ the file called "COPYING".
+
+ Contact Information:
+ Linux NICS <linux.nics@intel.com>
+ e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+*******************************************************************************/
+
+#ifndef _IXGB_HW_H_
+#define _IXGB_HW_H_
+
+#include <linux/mdio.h>
+
+#include "ixgb_osdep.h"
+
+/* Enums */
+typedef enum {
+ ixgb_mac_unknown = 0,
+ ixgb_82597,
+ ixgb_num_macs
+} ixgb_mac_type;
+
+/* Types of physical layer modules */
+typedef enum {
+ ixgb_phy_type_unknown = 0,
+ ixgb_phy_type_g6005, /* 850nm, MM fiber, XPAK transceiver */
+ ixgb_phy_type_g6104, /* 1310nm, SM fiber, XPAK transceiver */
+ ixgb_phy_type_txn17201, /* 850nm, MM fiber, XPAK transceiver */
+ ixgb_phy_type_txn17401, /* 1310nm, SM fiber, XENPAK transceiver */
+ ixgb_phy_type_bcm /* SUN specific board */
+} ixgb_phy_type;
+
+/* XPAK transceiver vendors, for the SR adapters */
+typedef enum {
+ ixgb_xpak_vendor_intel,
+ ixgb_xpak_vendor_infineon
+} ixgb_xpak_vendor;
+
+/* Media Types */
+typedef enum {
+ ixgb_media_type_unknown = 0,
+ ixgb_media_type_fiber = 1,
+ ixgb_media_type_copper = 2,
+ ixgb_num_media_types
+} ixgb_media_type;
+
+/* Flow Control Settings */
+typedef enum {
+ ixgb_fc_none = 0,
+ ixgb_fc_rx_pause = 1,
+ ixgb_fc_tx_pause = 2,
+ ixgb_fc_full = 3,
+ ixgb_fc_default = 0xFF
+} ixgb_fc_type;
+
+/* PCI bus types */
+typedef enum {
+ ixgb_bus_type_unknown = 0,
+ ixgb_bus_type_pci,
+ ixgb_bus_type_pcix
+} ixgb_bus_type;
+
+/* PCI bus speeds */
+typedef enum {
+ ixgb_bus_speed_unknown = 0,
+ ixgb_bus_speed_33,
+ ixgb_bus_speed_66,
+ ixgb_bus_speed_100,
+ ixgb_bus_speed_133,
+ ixgb_bus_speed_reserved
+} ixgb_bus_speed;
+
+/* PCI bus widths */
+typedef enum {
+ ixgb_bus_width_unknown = 0,
+ ixgb_bus_width_32,
+ ixgb_bus_width_64
+} ixgb_bus_width;
+
+#define IXGB_EEPROM_SIZE 64 /* Size in words */
+
+#define SPEED_10000 10000
+#define FULL_DUPLEX 2
+
+#define MIN_NUMBER_OF_DESCRIPTORS 8
+#define MAX_NUMBER_OF_DESCRIPTORS 0xFFF8 /* 13 bits in RDLEN/TDLEN, 128B aligned */
+
+#define IXGB_DELAY_BEFORE_RESET 10 /* allow 10ms after idling rx/tx units */
+#define IXGB_DELAY_AFTER_RESET 1 /* allow 1ms after the reset */
+#define IXGB_DELAY_AFTER_EE_RESET 10 /* allow 10ms after the EEPROM reset */
+
+#define IXGB_DELAY_USECS_AFTER_LINK_RESET 13 /* allow 13 microseconds after the reset */
+ /* NOTE: this is MICROSECONDS */
+#define MAX_RESET_ITERATIONS 8 /* number of iterations to get things right */
+
+/* General Registers */
+#define IXGB_CTRL0 0x00000 /* Device Control Register 0 - RW */
+#define IXGB_CTRL1 0x00008 /* Device Control Register 1 - RW */
+#define IXGB_STATUS 0x00010 /* Device Status Register - RO */
+#define IXGB_EECD 0x00018 /* EEPROM/Flash Control/Data Register - RW */
+#define IXGB_MFS 0x00020 /* Maximum Frame Size - RW */
+
+/* Interrupt */
+#define IXGB_ICR 0x00080 /* Interrupt Cause Read - R/clr */
+#define IXGB_ICS 0x00088 /* Interrupt Cause Set - RW */
+#define IXGB_IMS 0x00090 /* Interrupt Mask Set/Read - RW */
+#define IXGB_IMC 0x00098 /* Interrupt Mask Clear - WO */
+
+/* Receive */
+#define IXGB_RCTL 0x00100 /* RX Control - RW */
+#define IXGB_FCRTL 0x00108 /* Flow Control Receive Threshold Low - RW */
+#define IXGB_FCRTH 0x00110 /* Flow Control Receive Threshold High - RW */
+#define IXGB_RDBAL 0x00118 /* RX Descriptor Base Low - RW */
+#define IXGB_RDBAH 0x0011C /* RX Descriptor Base High - RW */
+#define IXGB_RDLEN 0x00120 /* RX Descriptor Length - RW */
+#define IXGB_RDH 0x00128 /* RX Descriptor Head - RW */
+#define IXGB_RDT 0x00130 /* RX Descriptor Tail - RW */
+#define IXGB_RDTR 0x00138 /* RX Delay Timer Ring - RW */
+#define IXGB_RXDCTL 0x00140 /* Receive Descriptor Control - RW */
+#define IXGB_RAIDC 0x00148 /* Receive Adaptive Interrupt Delay Control - RW */
+#define IXGB_RXCSUM 0x00158 /* Receive Checksum Control - RW */
+#define IXGB_RA 0x00180 /* Receive Address Array Base - RW */
+#define IXGB_RAL 0x00180 /* Receive Address Low [0:15] - RW */
+#define IXGB_RAH 0x00184 /* Receive Address High [0:15] - RW */
+#define IXGB_MTA 0x00200 /* Multicast Table Array [0:127] - RW */
+#define IXGB_VFTA 0x00400 /* VLAN Filter Table Array [0:127] - RW */
+#define IXGB_REQ_RX_DESCRIPTOR_MULTIPLE 8
+
+/* Transmit */
+#define IXGB_TCTL 0x00600 /* TX Control - RW */
+#define IXGB_TDBAL 0x00608 /* TX Descriptor Base Low - RW */
+#define IXGB_TDBAH 0x0060C /* TX Descriptor Base High - RW */
+#define IXGB_TDLEN 0x00610 /* TX Descriptor Length - RW */
+#define IXGB_TDH 0x00618 /* TX Descriptor Head - RW */
+#define IXGB_TDT 0x00620 /* TX Descriptor Tail - RW */
+#define IXGB_TIDV 0x00628 /* TX Interrupt Delay Value - RW */
+#define IXGB_TXDCTL 0x00630 /* Transmit Descriptor Control - RW */
+#define IXGB_TSPMT 0x00638 /* TCP Segmentation PAD & Min Threshold - RW */
+#define IXGB_PAP 0x00640 /* Pause and Pace - RW */
+#define IXGB_REQ_TX_DESCRIPTOR_MULTIPLE 8
+
+/* Physical */
+#define IXGB_PCSC1 0x00700 /* PCS Control 1 - RW */
+#define IXGB_PCSC2 0x00708 /* PCS Control 2 - RW */
+#define IXGB_PCSS1 0x00710 /* PCS Status 1 - RO */
+#define IXGB_PCSS2 0x00718 /* PCS Status 2 - RO */
+#define IXGB_XPCSS 0x00720 /* 10GBASE-X PCS Status (or XGXS Lane Status) - RO */
+#define IXGB_UCCR 0x00728 /* Unilink Circuit Control Register */
+#define IXGB_XPCSTC 0x00730 /* 10GBASE-X PCS Test Control */
+#define IXGB_MACA 0x00738 /* MDI Autoscan Command and Address - RW */
+#define IXGB_APAE 0x00740 /* Autoscan PHY Address Enable - RW */
+#define IXGB_ARD 0x00748 /* Autoscan Read Data - RO */
+#define IXGB_AIS 0x00750 /* Autoscan Interrupt Status - RO */
+#define IXGB_MSCA 0x00758 /* MDI Single Command and Address - RW */
+#define IXGB_MSRWD 0x00760 /* MDI Single Read and Write Data - RW, RO */
+
+/* Wake-up */
+#define IXGB_WUFC 0x00808 /* Wake Up Filter Control - RW */
+#define IXGB_WUS 0x00810 /* Wake Up Status - RO */
+#define IXGB_FFLT 0x01000 /* Flexible Filter Length Table - RW */
+#define IXGB_FFMT 0x01020 /* Flexible Filter Mask Table - RW */
+#define IXGB_FTVT 0x01420 /* Flexible Filter Value Table - RW */
+
+/* Statistics */
+#define IXGB_TPRL 0x02000 /* Total Packets Received (Low) */
+#define IXGB_TPRH 0x02004 /* Total Packets Received (High) */
+#define IXGB_GPRCL 0x02008 /* Good Packets Received Count (Low) */
+#define IXGB_GPRCH 0x0200C /* Good Packets Received Count (High) */
+#define IXGB_BPRCL 0x02010 /* Broadcast Packets Received Count (Low) */
+#define IXGB_BPRCH 0x02014 /* Broadcast Packets Received Count (High) */
+#define IXGB_MPRCL 0x02018 /* Multicast Packets Received Count (Low) */
+#define IXGB_MPRCH 0x0201C /* Multicast Packets Received Count (High) */
+#define IXGB_UPRCL 0x02020 /* Unicast Packets Received Count (Low) */
+#define IXGB_UPRCH 0x02024 /* Unicast Packets Received Count (High) */
+#define IXGB_VPRCL 0x02028 /* VLAN Packets Received Count (Low) */
+#define IXGB_VPRCH 0x0202C /* VLAN Packets Received Count (High) */
+#define IXGB_JPRCL 0x02030 /* Jumbo Packets Received Count (Low) */
+#define IXGB_JPRCH 0x02034 /* Jumbo Packets Received Count (High) */
+#define IXGB_GORCL 0x02038 /* Good Octets Received Count (Low) */
+#define IXGB_GORCH 0x0203C /* Good Octets Received Count (High) */
+#define IXGB_TORL 0x02040 /* Total Octets Received (Low) */
+#define IXGB_TORH 0x02044 /* Total Octets Received (High) */
+#define IXGB_RNBC 0x02048 /* Receive No Buffers Count */
+#define IXGB_RUC 0x02050 /* Receive Undersize Count */
+#define IXGB_ROC 0x02058 /* Receive Oversize Count */
+#define IXGB_RLEC 0x02060 /* Receive Length Error Count */
+#define IXGB_CRCERRS 0x02068 /* CRC Error Count */
+#define IXGB_ICBC 0x02070 /* Illegal control byte in mid-packet Count */
+#define IXGB_ECBC 0x02078 /* Error Control byte in mid-packet Count */
+#define IXGB_MPC 0x02080 /* Missed Packets Count */
+#define IXGB_TPTL 0x02100 /* Total Packets Transmitted (Low) */
+#define IXGB_TPTH 0x02104 /* Total Packets Transmitted (High) */
+#define IXGB_GPTCL 0x02108 /* Good Packets Transmitted Count (Low) */
+#define IXGB_GPTCH 0x0210C /* Good Packets Transmitted Count (High) */
+#define IXGB_BPTCL 0x02110 /* Broadcast Packets Transmitted Count (Low) */
+#define IXGB_BPTCH 0x02114 /* Broadcast Packets Transmitted Count (High) */
+#define IXGB_MPTCL 0x02118 /* Multicast Packets Transmitted Count (Low) */
+#define IXGB_MPTCH 0x0211C /* Multicast Packets Transmitted Count (High) */
+#define IXGB_UPTCL 0x02120 /* Unicast Packets Transmitted Count (Low) */
+#define IXGB_UPTCH 0x02124 /* Unicast Packets Transmitted Count (High) */
+#define IXGB_VPTCL 0x02128 /* VLAN Packets Transmitted Count (Low) */
+#define IXGB_VPTCH 0x0212C /* VLAN Packets Transmitted Count (High) */
+#define IXGB_JPTCL 0x02130 /* Jumbo Packets Transmitted Count (Low) */
+#define IXGB_JPTCH 0x02134 /* Jumbo Packets Transmitted Count (High) */
+#define IXGB_GOTCL 0x02138 /* Good Octets Transmitted Count (Low) */
+#define IXGB_GOTCH 0x0213C /* Good Octets Transmitted Count (High) */
+#define IXGB_TOTL 0x02140 /* Total Octets Transmitted Count (Low) */
+#define IXGB_TOTH 0x02144 /* Total Octets Transmitted Count (High) */
+#define IXGB_DC 0x02148 /* Defer Count */
+#define IXGB_PLT64C 0x02150 /* Packet Transmitted was less than 64 bytes Count */
+#define IXGB_TSCTC 0x02170 /* TCP Segmentation Context Transmitted Count */
+#define IXGB_TSCTFC 0x02178 /* TCP Segmentation Context Tx Fail Count */
+#define IXGB_IBIC 0x02180 /* Illegal byte during Idle stream count */
+#define IXGB_RFC 0x02188 /* Remote Fault Count */
+#define IXGB_LFC 0x02190 /* Local Fault Count */
+#define IXGB_PFRC 0x02198 /* Pause Frame Receive Count */
+#define IXGB_PFTC 0x021A0 /* Pause Frame Transmit Count */
+#define IXGB_MCFRC 0x021A8 /* MAC Control Frames (non-Pause) Received Count */
+#define IXGB_MCFTC 0x021B0 /* MAC Control Frames (non-Pause) Transmitted Count */
+#define IXGB_XONRXC 0x021B8 /* XON Received Count */
+#define IXGB_XONTXC 0x021C0 /* XON Transmitted Count */
+#define IXGB_XOFFRXC 0x021C8 /* XOFF Received Count */
+#define IXGB_XOFFTXC 0x021D0 /* XOFF Transmitted Count */
+#define IXGB_RJC 0x021D8 /* Receive Jabber Count */
+
+/* CTRL0 Bit Masks */
+#define IXGB_CTRL0_LRST 0x00000008
+#define IXGB_CTRL0_JFE 0x00000010
+#define IXGB_CTRL0_XLE 0x00000020
+#define IXGB_CTRL0_MDCS 0x00000040
+#define IXGB_CTRL0_CMDC 0x00000080
+#define IXGB_CTRL0_SDP0 0x00040000
+#define IXGB_CTRL0_SDP1 0x00080000
+#define IXGB_CTRL0_SDP2 0x00100000
+#define IXGB_CTRL0_SDP3 0x00200000
+#define IXGB_CTRL0_SDP0_DIR 0x00400000
+#define IXGB_CTRL0_SDP1_DIR 0x00800000
+#define IXGB_CTRL0_SDP2_DIR 0x01000000
+#define IXGB_CTRL0_SDP3_DIR 0x02000000
+#define IXGB_CTRL0_RST 0x04000000
+#define IXGB_CTRL0_RPE 0x08000000
+#define IXGB_CTRL0_TPE 0x10000000
+#define IXGB_CTRL0_VME 0x40000000
+
+/* CTRL1 Bit Masks */
+#define IXGB_CTRL1_GPI0_EN 0x00000001
+#define IXGB_CTRL1_GPI1_EN 0x00000002
+#define IXGB_CTRL1_GPI2_EN 0x00000004
+#define IXGB_CTRL1_GPI3_EN 0x00000008
+#define IXGB_CTRL1_SDP4 0x00000010
+#define IXGB_CTRL1_SDP5 0x00000020
+#define IXGB_CTRL1_SDP6 0x00000040
+#define IXGB_CTRL1_SDP7 0x00000080
+#define IXGB_CTRL1_SDP4_DIR 0x00000100
+#define IXGB_CTRL1_SDP5_DIR 0x00000200
+#define IXGB_CTRL1_SDP6_DIR 0x00000400
+#define IXGB_CTRL1_SDP7_DIR 0x00000800
+#define IXGB_CTRL1_EE_RST 0x00002000
+#define IXGB_CTRL1_RO_DIS 0x00020000
+#define IXGB_CTRL1_PCIXHM_MASK 0x00C00000
+#define IXGB_CTRL1_PCIXHM_1_2 0x00000000
+#define IXGB_CTRL1_PCIXHM_5_8 0x00400000
+#define IXGB_CTRL1_PCIXHM_3_4 0x00800000
+#define IXGB_CTRL1_PCIXHM_7_8 0x00C00000
+
+/* STATUS Bit Masks */
+#define IXGB_STATUS_LU 0x00000002
+#define IXGB_STATUS_AIP 0x00000004
+#define IXGB_STATUS_TXOFF 0x00000010
+#define IXGB_STATUS_XAUIME 0x00000020
+#define IXGB_STATUS_RES 0x00000040
+#define IXGB_STATUS_RIS 0x00000080
+#define IXGB_STATUS_RIE 0x00000100
+#define IXGB_STATUS_RLF 0x00000200
+#define IXGB_STATUS_RRF 0x00000400
+#define IXGB_STATUS_PCI_SPD 0x00000800
+#define IXGB_STATUS_BUS64 0x00001000
+#define IXGB_STATUS_PCIX_MODE 0x00002000
+#define IXGB_STATUS_PCIX_SPD_MASK 0x0000C000
+#define IXGB_STATUS_PCIX_SPD_66 0x00000000
+#define IXGB_STATUS_PCIX_SPD_100 0x00004000
+#define IXGB_STATUS_PCIX_SPD_133 0x00008000
+#define IXGB_STATUS_REV_ID_MASK 0x000F0000
+#define IXGB_STATUS_REV_ID_SHIFT 16
+
+/* EECD Bit Masks */
+#define IXGB_EECD_SK 0x00000001
+#define IXGB_EECD_CS 0x00000002
+#define IXGB_EECD_DI 0x00000004
+#define IXGB_EECD_DO 0x00000008
+#define IXGB_EECD_FWE_MASK 0x00000030
+#define IXGB_EECD_FWE_DIS 0x00000010
+#define IXGB_EECD_FWE_EN 0x00000020
+
+/* MFS */
+#define IXGB_MFS_SHIFT 16
+
+/* Interrupt Register Bit Masks (used for ICR, ICS, IMS, and IMC) */
+#define IXGB_INT_TXDW 0x00000001
+#define IXGB_INT_TXQE 0x00000002
+#define IXGB_INT_LSC 0x00000004
+#define IXGB_INT_RXSEQ 0x00000008
+#define IXGB_INT_RXDMT0 0x00000010
+#define IXGB_INT_RXO 0x00000040
+#define IXGB_INT_RXT0 0x00000080
+#define IXGB_INT_AUTOSCAN 0x00000200
+#define IXGB_INT_GPI0 0x00000800
+#define IXGB_INT_GPI1 0x00001000
+#define IXGB_INT_GPI2 0x00002000
+#define IXGB_INT_GPI3 0x00004000
+
+/* RCTL Bit Masks */
+#define IXGB_RCTL_RXEN 0x00000002
+#define IXGB_RCTL_SBP 0x00000004
+#define IXGB_RCTL_UPE 0x00000008
+#define IXGB_RCTL_MPE 0x00000010
+#define IXGB_RCTL_RDMTS_MASK 0x00000300
+#define IXGB_RCTL_RDMTS_1_2 0x00000000
+#define IXGB_RCTL_RDMTS_1_4 0x00000100
+#define IXGB_RCTL_RDMTS_1_8 0x00000200
+#define IXGB_RCTL_MO_MASK 0x00003000
+#define IXGB_RCTL_MO_47_36 0x00000000
+#define IXGB_RCTL_MO_46_35 0x00001000
+#define IXGB_RCTL_MO_45_34 0x00002000
+#define IXGB_RCTL_MO_43_32 0x00003000
+#define IXGB_RCTL_MO_SHIFT 12
+#define IXGB_RCTL_BAM 0x00008000
+#define IXGB_RCTL_BSIZE_MASK 0x00030000
+#define IXGB_RCTL_BSIZE_2048 0x00000000
+#define IXGB_RCTL_BSIZE_4096 0x00010000
+#define IXGB_RCTL_BSIZE_8192 0x00020000
+#define IXGB_RCTL_BSIZE_16384 0x00030000
+#define IXGB_RCTL_VFE 0x00040000
+#define IXGB_RCTL_CFIEN 0x00080000
+#define IXGB_RCTL_CFI 0x00100000
+#define IXGB_RCTL_RPDA_MASK 0x00600000
+#define IXGB_RCTL_RPDA_MC_MAC 0x00000000
+#define IXGB_RCTL_MC_ONLY 0x00400000
+#define IXGB_RCTL_CFF 0x00800000
+#define IXGB_RCTL_SECRC 0x04000000
+#define IXGB_RDT_FPDB 0x80000000
+
+#define IXGB_RCTL_IDLE_RX_UNIT 0
+
+/* FCRTL Bit Masks */
+#define IXGB_FCRTL_XONE 0x80000000
+
+/* RXDCTL Bit Masks */
+#define IXGB_RXDCTL_PTHRESH_MASK 0x000001FF
+#define IXGB_RXDCTL_PTHRESH_SHIFT 0
+#define IXGB_RXDCTL_HTHRESH_MASK 0x0003FE00
+#define IXGB_RXDCTL_HTHRESH_SHIFT 9
+#define IXGB_RXDCTL_WTHRESH_MASK 0x07FC0000
+#define IXGB_RXDCTL_WTHRESH_SHIFT 18
+
+/* RAIDC Bit Masks */
+#define IXGB_RAIDC_HIGHTHRS_MASK 0x0000003F
+#define IXGB_RAIDC_DELAY_MASK 0x000FF800
+#define IXGB_RAIDC_DELAY_SHIFT 11
+#define IXGB_RAIDC_POLL_MASK 0x1FF00000
+#define IXGB_RAIDC_POLL_SHIFT 20
+#define IXGB_RAIDC_RXT_GATE 0x40000000
+#define IXGB_RAIDC_EN 0x80000000
+
+#define IXGB_RAIDC_POLL_1000_INTERRUPTS_PER_SECOND 1220
+#define IXGB_RAIDC_POLL_5000_INTERRUPTS_PER_SECOND 244
+#define IXGB_RAIDC_POLL_10000_INTERRUPTS_PER_SECOND 122
+#define IXGB_RAIDC_POLL_20000_INTERRUPTS_PER_SECOND 61
+
+/* RXCSUM Bit Masks */
+#define IXGB_RXCSUM_IPOFL 0x00000100
+#define IXGB_RXCSUM_TUOFL 0x00000200
+
+/* RAH Bit Masks */
+#define IXGB_RAH_ASEL_MASK 0x00030000
+#define IXGB_RAH_ASEL_DEST 0x00000000
+#define IXGB_RAH_ASEL_SRC 0x00010000
+#define IXGB_RAH_AV 0x80000000
+
+/* TCTL Bit Masks */
+#define IXGB_TCTL_TCE 0x00000001
+#define IXGB_TCTL_TXEN 0x00000002
+#define IXGB_TCTL_TPDE 0x00000004
+
+#define IXGB_TCTL_IDLE_TX_UNIT 0
+
+/* TXDCTL Bit Masks */
+#define IXGB_TXDCTL_PTHRESH_MASK 0x0000007F
+#define IXGB_TXDCTL_HTHRESH_MASK 0x00007F00
+#define IXGB_TXDCTL_HTHRESH_SHIFT 8
+#define IXGB_TXDCTL_WTHRESH_MASK 0x007F0000
+#define IXGB_TXDCTL_WTHRESH_SHIFT 16
+
+/* TSPMT Bit Masks */
+#define IXGB_TSPMT_TSMT_MASK 0x0000FFFF
+#define IXGB_TSPMT_TSPBP_MASK 0xFFFF0000
+#define IXGB_TSPMT_TSPBP_SHIFT 16
+
+/* PAP Bit Masks */
+#define IXGB_PAP_TXPC_MASK 0x0000FFFF
+#define IXGB_PAP_TXPV_MASK 0x000F0000
+#define IXGB_PAP_TXPV_10G 0x00000000
+#define IXGB_PAP_TXPV_1G 0x00010000
+#define IXGB_PAP_TXPV_2G 0x00020000
+#define IXGB_PAP_TXPV_3G 0x00030000
+#define IXGB_PAP_TXPV_4G 0x00040000
+#define IXGB_PAP_TXPV_5G 0x00050000
+#define IXGB_PAP_TXPV_6G 0x00060000
+#define IXGB_PAP_TXPV_7G 0x00070000
+#define IXGB_PAP_TXPV_8G 0x00080000
+#define IXGB_PAP_TXPV_9G 0x00090000
+#define IXGB_PAP_TXPV_WAN 0x000F0000
+
+/* PCSC1 Bit Masks */
+#define IXGB_PCSC1_LOOPBACK 0x00004000
+
+/* PCSC2 Bit Masks */
+#define IXGB_PCSC2_PCS_TYPE_MASK 0x00000003
+#define IXGB_PCSC2_PCS_TYPE_10GBX 0x00000001
+
+/* PCSS1 Bit Masks */
+#define IXGB_PCSS1_LOCAL_FAULT 0x00000080
+#define IXGB_PCSS1_RX_LINK_STATUS 0x00000004
+
+/* PCSS2 Bit Masks */
+#define IXGB_PCSS2_DEV_PRES_MASK 0x0000C000
+#define IXGB_PCSS2_DEV_PRES 0x00004000
+#define IXGB_PCSS2_TX_LF 0x00000800
+#define IXGB_PCSS2_RX_LF 0x00000400
+#define IXGB_PCSS2_10GBW 0x00000004
+#define IXGB_PCSS2_10GBX 0x00000002
+#define IXGB_PCSS2_10GBR 0x00000001
+
+/* XPCSS Bit Masks */
+#define IXGB_XPCSS_ALIGN_STATUS 0x00001000
+#define IXGB_XPCSS_PATTERN_TEST 0x00000800
+#define IXGB_XPCSS_LANE_3_SYNC 0x00000008
+#define IXGB_XPCSS_LANE_2_SYNC 0x00000004
+#define IXGB_XPCSS_LANE_1_SYNC 0x00000002
+#define IXGB_XPCSS_LANE_0_SYNC 0x00000001
+
+/* XPCSTC Bit Masks */
+#define IXGB_XPCSTC_BERT_TRIG 0x00200000
+#define IXGB_XPCSTC_BERT_SST 0x00100000
+#define IXGB_XPCSTC_BERT_PSZ_MASK 0x000C0000
+#define IXGB_XPCSTC_BERT_PSZ_SHIFT 17
+#define IXGB_XPCSTC_BERT_PSZ_INF 0x00000003
+#define IXGB_XPCSTC_BERT_PSZ_68 0x00000001
+#define IXGB_XPCSTC_BERT_PSZ_1028 0x00000000
+
+/* MSCA bit Masks */
+/* New Protocol Address */
+#define IXGB_MSCA_NP_ADDR_MASK 0x0000FFFF
+#define IXGB_MSCA_NP_ADDR_SHIFT 0
+/* Either Device Type or Register Address,depending on ST_CODE */
+#define IXGB_MSCA_DEV_TYPE_MASK 0x001F0000
+#define IXGB_MSCA_DEV_TYPE_SHIFT 16
+#define IXGB_MSCA_PHY_ADDR_MASK 0x03E00000
+#define IXGB_MSCA_PHY_ADDR_SHIFT 21
+#define IXGB_MSCA_OP_CODE_MASK 0x0C000000
+/* OP_CODE == 00, Address cycle, New Protocol */
+/* OP_CODE == 01, Write operation */
+/* OP_CODE == 10, Read operation */
+/* OP_CODE == 11, Read, auto increment, New Protocol */
+#define IXGB_MSCA_ADDR_CYCLE 0x00000000
+#define IXGB_MSCA_WRITE 0x04000000
+#define IXGB_MSCA_READ 0x08000000
+#define IXGB_MSCA_READ_AUTOINC 0x0C000000
+#define IXGB_MSCA_OP_CODE_SHIFT 26
+#define IXGB_MSCA_ST_CODE_MASK 0x30000000
+/* ST_CODE == 00, New Protocol */
+/* ST_CODE == 01, Old Protocol */
+#define IXGB_MSCA_NEW_PROTOCOL 0x00000000
+#define IXGB_MSCA_OLD_PROTOCOL 0x10000000
+#define IXGB_MSCA_ST_CODE_SHIFT 28
+/* Initiate command, self-clearing when command completes */
+#define IXGB_MSCA_MDI_COMMAND 0x40000000
+/*MDI In Progress Enable. */
+#define IXGB_MSCA_MDI_IN_PROG_EN 0x80000000
+
+/* MSRWD bit masks */
+#define IXGB_MSRWD_WRITE_DATA_MASK 0x0000FFFF
+#define IXGB_MSRWD_WRITE_DATA_SHIFT 0
+#define IXGB_MSRWD_READ_DATA_MASK 0xFFFF0000
+#define IXGB_MSRWD_READ_DATA_SHIFT 16
+
+/* Definitions for the optics devices on the MDIO bus. */
+#define IXGB_PHY_ADDRESS 0x0 /* Single PHY, multiple "Devices" */
+
+#define MDIO_PMA_PMD_XPAK_VENDOR_NAME 0x803A /* XPAK/XENPAK devices only */
+
+/* Vendor-specific MDIO registers */
+#define G6XXX_PMA_PMD_VS1 0xC001 /* Vendor-specific register */
+#define G6XXX_XGXS_XAUI_VS2 0x18 /* Vendor-specific register */
+
+#define G6XXX_PMA_PMD_VS1_PLL_RESET 0x80
+#define G6XXX_PMA_PMD_VS1_REMOVE_PLL_RESET 0x00
+#define G6XXX_XGXS_XAUI_VS2_INPUT_MASK 0x0F /* XAUI lanes synchronized */
+
+/* Layout of a single receive descriptor. The controller assumes that this
+ * structure is packed into 16 bytes, which is a safe assumption with most
+ * compilers. However, some compilers may insert padding between the fields,
+ * in which case the structure must be packed in some compiler-specific
+ * manner. */
+struct ixgb_rx_desc {
+ __le64 buff_addr;
+ __le16 length;
+ __le16 reserved;
+ u8 status;
+ u8 errors;
+ __le16 special;
+};
+
+#define IXGB_RX_DESC_STATUS_DD 0x01
+#define IXGB_RX_DESC_STATUS_EOP 0x02
+#define IXGB_RX_DESC_STATUS_IXSM 0x04
+#define IXGB_RX_DESC_STATUS_VP 0x08
+#define IXGB_RX_DESC_STATUS_TCPCS 0x20
+#define IXGB_RX_DESC_STATUS_IPCS 0x40
+#define IXGB_RX_DESC_STATUS_PIF 0x80
+
+#define IXGB_RX_DESC_ERRORS_CE 0x01
+#define IXGB_RX_DESC_ERRORS_SE 0x02
+#define IXGB_RX_DESC_ERRORS_P 0x08
+#define IXGB_RX_DESC_ERRORS_TCPE 0x20
+#define IXGB_RX_DESC_ERRORS_IPE 0x40
+#define IXGB_RX_DESC_ERRORS_RXE 0x80
+
+#define IXGB_RX_DESC_SPECIAL_VLAN_MASK 0x0FFF /* VLAN ID is in lower 12 bits */
+#define IXGB_RX_DESC_SPECIAL_PRI_MASK 0xE000 /* Priority is in upper 3 bits */
+#define IXGB_RX_DESC_SPECIAL_PRI_SHIFT 0x000D /* Priority is in upper 3 of 16 */
+
+/* Layout of a single transmit descriptor. The controller assumes that this
+ * structure is packed into 16 bytes, which is a safe assumption with most
+ * compilers. However, some compilers may insert padding between the fields,
+ * in which case the structure must be packed in some compiler-specific
+ * manner. */
+struct ixgb_tx_desc {
+ __le64 buff_addr;
+ __le32 cmd_type_len;
+ u8 status;
+ u8 popts;
+ __le16 vlan;
+};
+
+#define IXGB_TX_DESC_LENGTH_MASK 0x000FFFFF
+#define IXGB_TX_DESC_TYPE_MASK 0x00F00000
+#define IXGB_TX_DESC_TYPE_SHIFT 20
+#define IXGB_TX_DESC_CMD_MASK 0xFF000000
+#define IXGB_TX_DESC_CMD_SHIFT 24
+#define IXGB_TX_DESC_CMD_EOP 0x01000000
+#define IXGB_TX_DESC_CMD_TSE 0x04000000
+#define IXGB_TX_DESC_CMD_RS 0x08000000
+#define IXGB_TX_DESC_CMD_VLE 0x40000000
+#define IXGB_TX_DESC_CMD_IDE 0x80000000
+
+#define IXGB_TX_DESC_TYPE 0x00100000
+
+#define IXGB_TX_DESC_STATUS_DD 0x01
+
+#define IXGB_TX_DESC_POPTS_IXSM 0x01
+#define IXGB_TX_DESC_POPTS_TXSM 0x02
+#define IXGB_TX_DESC_SPECIAL_PRI_SHIFT IXGB_RX_DESC_SPECIAL_PRI_SHIFT /* Priority is in upper 3 of 16 */
+
+struct ixgb_context_desc {
+ u8 ipcss;
+ u8 ipcso;
+ __le16 ipcse;
+ u8 tucss;
+ u8 tucso;
+ __le16 tucse;
+ __le32 cmd_type_len;
+ u8 status;
+ u8 hdr_len;
+ __le16 mss;
+};
+
+#define IXGB_CONTEXT_DESC_CMD_TCP 0x01000000
+#define IXGB_CONTEXT_DESC_CMD_IP 0x02000000
+#define IXGB_CONTEXT_DESC_CMD_TSE 0x04000000
+#define IXGB_CONTEXT_DESC_CMD_RS 0x08000000
+#define IXGB_CONTEXT_DESC_CMD_IDE 0x80000000
+
+#define IXGB_CONTEXT_DESC_TYPE 0x00000000
+
+#define IXGB_CONTEXT_DESC_STATUS_DD 0x01
+
+/* Filters */
+#define IXGB_MC_TBL_SIZE 128 /* Multicast Filter Table (4096 bits) */
+#define IXGB_VLAN_FILTER_TBL_SIZE 128 /* VLAN Filter Table (4096 bits) */
+#define IXGB_RAR_ENTRIES 3 /* Number of entries in Rx Address array */
+
+#define IXGB_MEMORY_REGISTER_BASE_ADDRESS 0
+#define ENET_HEADER_SIZE 14
+#define ENET_FCS_LENGTH 4
+#define IXGB_MAX_NUM_MULTICAST_ADDRESSES 128
+#define IXGB_MIN_ENET_FRAME_SIZE_WITHOUT_FCS 60
+#define IXGB_MAX_ENET_FRAME_SIZE_WITHOUT_FCS 1514
+#define IXGB_MAX_JUMBO_FRAME_SIZE 0x3F00
+
+/* Phy Addresses */
+#define IXGB_OPTICAL_PHY_ADDR 0x0 /* Optical Module phy address */
+#define IXGB_XAUII_PHY_ADDR 0x1 /* Xauii transceiver phy address */
+#define IXGB_DIAG_PHY_ADDR 0x1F /* Diagnostic Device phy address */
+
+/* This structure takes a 64k flash and maps it for identification commands */
+struct ixgb_flash_buffer {
+ u8 manufacturer_id;
+ u8 device_id;
+ u8 filler1[0x2AA8];
+ u8 cmd2;
+ u8 filler2[0x2AAA];
+ u8 cmd1;
+ u8 filler3[0xAAAA];
+};
+
+/* Flow control parameters */
+struct ixgb_fc {
+ u32 high_water; /* Flow Control High-water */
+ u32 low_water; /* Flow Control Low-water */
+ u16 pause_time; /* Flow Control Pause timer */
+ bool send_xon; /* Flow control send XON */
+ ixgb_fc_type type; /* Type of flow control */
+};
+
+/* The historical defaults for the flow control values are given below. */
+#define FC_DEFAULT_HI_THRESH (0x8000) /* 32KB */
+#define FC_DEFAULT_LO_THRESH (0x4000) /* 16KB */
+#define FC_DEFAULT_TX_TIMER (0x100) /* ~130 us */
+
+/* Phy definitions */
+#define IXGB_MAX_PHY_REG_ADDRESS 0xFFFF
+#define IXGB_MAX_PHY_ADDRESS 31
+#define IXGB_MAX_PHY_DEV_TYPE 31
+
+/* Bus parameters */
+struct ixgb_bus {
+ ixgb_bus_speed speed;
+ ixgb_bus_width width;
+ ixgb_bus_type type;
+};
+
+struct ixgb_hw {
+ u8 __iomem *hw_addr;/* Base Address of the hardware */
+ void *back; /* Pointer to OS-dependent struct */
+ struct ixgb_fc fc; /* Flow control parameters */
+ struct ixgb_bus bus; /* Bus parameters */
+ u32 phy_id; /* Phy Identifier */
+ u32 phy_addr; /* XGMII address of Phy */
+ ixgb_mac_type mac_type; /* Identifier for MAC controller */
+ ixgb_phy_type phy_type; /* Transceiver/phy identifier */
+ u32 max_frame_size; /* Maximum frame size supported */
+ u32 mc_filter_type; /* Multicast filter hash type */
+ u32 num_mc_addrs; /* Number of current Multicast addrs */
+ u8 curr_mac_addr[ETH_ALEN]; /* Individual address currently programmed in MAC */
+ u32 num_tx_desc; /* Number of Transmit descriptors */
+ u32 num_rx_desc; /* Number of Receive descriptors */
+ u32 rx_buffer_size; /* Size of Receive buffer */
+ bool link_up; /* true if link is valid */
+ bool adapter_stopped; /* State of adapter */
+ u16 device_id; /* device id from PCI configuration space */
+ u16 vendor_id; /* vendor id from PCI configuration space */
+ u8 revision_id; /* revision id from PCI configuration space */
+ u16 subsystem_vendor_id; /* subsystem vendor id from PCI configuration space */
+ u16 subsystem_id; /* subsystem id from PCI configuration space */
+ u32 bar0; /* Base Address registers */
+ u32 bar1;
+ u32 bar2;
+ u32 bar3;
+ u16 pci_cmd_word; /* PCI command register id from PCI configuration space */
+ __le16 eeprom[IXGB_EEPROM_SIZE]; /* EEPROM contents read at init time */
+ unsigned long io_base; /* Our I/O mapped location */
+ u32 lastLFC;
+ u32 lastRFC;
+};
+
+/* Statistics reported by the hardware */
+struct ixgb_hw_stats {
+ u64 tprl;
+ u64 tprh;
+ u64 gprcl;
+ u64 gprch;
+ u64 bprcl;
+ u64 bprch;
+ u64 mprcl;
+ u64 mprch;
+ u64 uprcl;
+ u64 uprch;
+ u64 vprcl;
+ u64 vprch;
+ u64 jprcl;
+ u64 jprch;
+ u64 gorcl;
+ u64 gorch;
+ u64 torl;
+ u64 torh;
+ u64 rnbc;
+ u64 ruc;
+ u64 roc;
+ u64 rlec;
+ u64 crcerrs;
+ u64 icbc;
+ u64 ecbc;
+ u64 mpc;
+ u64 tptl;
+ u64 tpth;
+ u64 gptcl;
+ u64 gptch;
+ u64 bptcl;
+ u64 bptch;
+ u64 mptcl;
+ u64 mptch;
+ u64 uptcl;
+ u64 uptch;
+ u64 vptcl;
+ u64 vptch;
+ u64 jptcl;
+ u64 jptch;
+ u64 gotcl;
+ u64 gotch;
+ u64 totl;
+ u64 toth;
+ u64 dc;
+ u64 plt64c;
+ u64 tsctc;
+ u64 tsctfc;
+ u64 ibic;
+ u64 rfc;
+ u64 lfc;
+ u64 pfrc;
+ u64 pftc;
+ u64 mcfrc;
+ u64 mcftc;
+ u64 xonrxc;
+ u64 xontxc;
+ u64 xoffrxc;
+ u64 xofftxc;
+ u64 rjc;
+};
+
+/* Function Prototypes */
+bool ixgb_adapter_stop(struct ixgb_hw *hw);
+bool ixgb_init_hw(struct ixgb_hw *hw);
+bool ixgb_adapter_start(struct ixgb_hw *hw);
+void ixgb_check_for_link(struct ixgb_hw *hw);
+bool ixgb_check_for_bad_link(struct ixgb_hw *hw);
+
+void ixgb_rar_set(struct ixgb_hw *hw, u8 *addr, u32 index);
+
+/* Filters (multicast, vlan, receive) */
+void ixgb_mc_addr_list_update(struct ixgb_hw *hw, u8 *mc_addr_list,
+ u32 mc_addr_count, u32 pad);
+
+/* Vfta functions */
+void ixgb_write_vfta(struct ixgb_hw *hw, u32 offset, u32 value);
+
+/* Access functions to eeprom data */
+void ixgb_get_ee_mac_addr(struct ixgb_hw *hw, u8 *mac_addr);
+u32 ixgb_get_ee_pba_number(struct ixgb_hw *hw);
+u16 ixgb_get_ee_device_id(struct ixgb_hw *hw);
+bool ixgb_get_eeprom_data(struct ixgb_hw *hw);
+__le16 ixgb_get_eeprom_word(struct ixgb_hw *hw, u16 index);
+
+/* Everything else */
+void ixgb_led_on(struct ixgb_hw *hw);
+void ixgb_led_off(struct ixgb_hw *hw);
+void ixgb_write_pci_cfg(struct ixgb_hw *hw,
+ u32 reg,
+ u16 * value);
+
+
+#endif /* _IXGB_HW_H_ */
diff --git a/kernel/drivers/net/ethernet/intel/ixgb/ixgb_ids.h b/kernel/drivers/net/ethernet/intel/ixgb/ixgb_ids.h
new file mode 100644
index 000000000..32c1b302d
--- /dev/null
+++ b/kernel/drivers/net/ethernet/intel/ixgb/ixgb_ids.h
@@ -0,0 +1,48 @@
+/*******************************************************************************
+
+ Intel PRO/10GbE Linux driver
+ Copyright(c) 1999 - 2008 Intel Corporation.
+
+ This program is free software; you can redistribute it and/or modify it
+ under the terms and conditions of the GNU General Public License,
+ version 2, as published by the Free Software Foundation.
+
+ This program is distributed in the hope it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ more details.
+
+ You should have received a copy of the GNU General Public License along with
+ this program; if not, write to the Free Software Foundation, Inc.,
+ 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+ The full GNU General Public License is included in this distribution in
+ the file called "COPYING".
+
+ Contact Information:
+ Linux NICS <linux.nics@intel.com>
+ e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+*******************************************************************************/
+
+#ifndef _IXGB_IDS_H_
+#define _IXGB_IDS_H_
+
+/**********************************************************************
+** The Device and Vendor IDs for 10 Gigabit MACs
+**********************************************************************/
+
+#define IXGB_DEVICE_ID_82597EX 0x1048
+#define IXGB_DEVICE_ID_82597EX_SR 0x1A48
+#define IXGB_DEVICE_ID_82597EX_LR 0x1B48
+#define IXGB_SUBDEVICE_ID_A11F 0xA11F
+#define IXGB_SUBDEVICE_ID_A01F 0xA01F
+
+#define IXGB_DEVICE_ID_82597EX_CX4 0x109E
+#define IXGB_SUBDEVICE_ID_A00C 0xA00C
+#define IXGB_SUBDEVICE_ID_A01C 0xA01C
+#define IXGB_SUBDEVICE_ID_7036 0x7036
+
+#endif /* #ifndef _IXGB_IDS_H_ */
+/* End of File */
diff --git a/kernel/drivers/net/ethernet/intel/ixgb/ixgb_main.c b/kernel/drivers/net/ethernet/intel/ixgb/ixgb_main.c
new file mode 100644
index 000000000..31f914593
--- /dev/null
+++ b/kernel/drivers/net/ethernet/intel/ixgb/ixgb_main.c
@@ -0,0 +1,2368 @@
+/*******************************************************************************
+
+ Intel PRO/10GbE Linux driver
+ Copyright(c) 1999 - 2008 Intel Corporation.
+
+ This program is free software; you can redistribute it and/or modify it
+ under the terms and conditions of the GNU General Public License,
+ version 2, as published by the Free Software Foundation.
+
+ This program is distributed in the hope it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ more details.
+
+ You should have received a copy of the GNU General Public License along with
+ this program; if not, write to the Free Software Foundation, Inc.,
+ 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+ The full GNU General Public License is included in this distribution in
+ the file called "COPYING".
+
+ Contact Information:
+ Linux NICS <linux.nics@intel.com>
+ e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+*******************************************************************************/
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/prefetch.h>
+#include "ixgb.h"
+
+char ixgb_driver_name[] = "ixgb";
+static char ixgb_driver_string[] = "Intel(R) PRO/10GbE Network Driver";
+
+#define DRIVERNAPI "-NAPI"
+#define DRV_VERSION "1.0.135-k2" DRIVERNAPI
+const char ixgb_driver_version[] = DRV_VERSION;
+static const char ixgb_copyright[] = "Copyright (c) 1999-2008 Intel Corporation.";
+
+#define IXGB_CB_LENGTH 256
+static unsigned int copybreak __read_mostly = IXGB_CB_LENGTH;
+module_param(copybreak, uint, 0644);
+MODULE_PARM_DESC(copybreak,
+ "Maximum size of packet that is copied to a new buffer on receive");
+
+/* ixgb_pci_tbl - PCI Device ID Table
+ *
+ * Wildcard entries (PCI_ANY_ID) should come last
+ * Last entry must be all 0s
+ *
+ * { Vendor ID, Device ID, SubVendor ID, SubDevice ID,
+ * Class, Class Mask, private data (not used) }
+ */
+static const struct pci_device_id ixgb_pci_tbl[] = {
+ {PCI_VENDOR_ID_INTEL, IXGB_DEVICE_ID_82597EX,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
+ {PCI_VENDOR_ID_INTEL, IXGB_DEVICE_ID_82597EX_CX4,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
+ {PCI_VENDOR_ID_INTEL, IXGB_DEVICE_ID_82597EX_SR,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
+ {PCI_VENDOR_ID_INTEL, IXGB_DEVICE_ID_82597EX_LR,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
+
+ /* required last entry */
+ {0,}
+};
+
+MODULE_DEVICE_TABLE(pci, ixgb_pci_tbl);
+
+/* Local Function Prototypes */
+static int ixgb_init_module(void);
+static void ixgb_exit_module(void);
+static int ixgb_probe(struct pci_dev *pdev, const struct pci_device_id *ent);
+static void ixgb_remove(struct pci_dev *pdev);
+static int ixgb_sw_init(struct ixgb_adapter *adapter);
+static int ixgb_open(struct net_device *netdev);
+static int ixgb_close(struct net_device *netdev);
+static void ixgb_configure_tx(struct ixgb_adapter *adapter);
+static void ixgb_configure_rx(struct ixgb_adapter *adapter);
+static void ixgb_setup_rctl(struct ixgb_adapter *adapter);
+static void ixgb_clean_tx_ring(struct ixgb_adapter *adapter);
+static void ixgb_clean_rx_ring(struct ixgb_adapter *adapter);
+static void ixgb_set_multi(struct net_device *netdev);
+static void ixgb_watchdog(unsigned long data);
+static netdev_tx_t ixgb_xmit_frame(struct sk_buff *skb,
+ struct net_device *netdev);
+static struct net_device_stats *ixgb_get_stats(struct net_device *netdev);
+static int ixgb_change_mtu(struct net_device *netdev, int new_mtu);
+static int ixgb_set_mac(struct net_device *netdev, void *p);
+static irqreturn_t ixgb_intr(int irq, void *data);
+static bool ixgb_clean_tx_irq(struct ixgb_adapter *adapter);
+
+static int ixgb_clean(struct napi_struct *, int);
+static bool ixgb_clean_rx_irq(struct ixgb_adapter *, int *, int);
+static void ixgb_alloc_rx_buffers(struct ixgb_adapter *, int);
+
+static void ixgb_tx_timeout(struct net_device *dev);
+static void ixgb_tx_timeout_task(struct work_struct *work);
+
+static void ixgb_vlan_strip_enable(struct ixgb_adapter *adapter);
+static void ixgb_vlan_strip_disable(struct ixgb_adapter *adapter);
+static int ixgb_vlan_rx_add_vid(struct net_device *netdev,
+ __be16 proto, u16 vid);
+static int ixgb_vlan_rx_kill_vid(struct net_device *netdev,
+ __be16 proto, u16 vid);
+static void ixgb_restore_vlan(struct ixgb_adapter *adapter);
+
+#ifdef CONFIG_NET_POLL_CONTROLLER
+/* for netdump / net console */
+static void ixgb_netpoll(struct net_device *dev);
+#endif
+
+static pci_ers_result_t ixgb_io_error_detected (struct pci_dev *pdev,
+ enum pci_channel_state state);
+static pci_ers_result_t ixgb_io_slot_reset (struct pci_dev *pdev);
+static void ixgb_io_resume (struct pci_dev *pdev);
+
+static const struct pci_error_handlers ixgb_err_handler = {
+ .error_detected = ixgb_io_error_detected,
+ .slot_reset = ixgb_io_slot_reset,
+ .resume = ixgb_io_resume,
+};
+
+static struct pci_driver ixgb_driver = {
+ .name = ixgb_driver_name,
+ .id_table = ixgb_pci_tbl,
+ .probe = ixgb_probe,
+ .remove = ixgb_remove,
+ .err_handler = &ixgb_err_handler
+};
+
+MODULE_AUTHOR("Intel Corporation, <linux.nics@intel.com>");
+MODULE_DESCRIPTION("Intel(R) PRO/10GbE Network Driver");
+MODULE_LICENSE("GPL");
+MODULE_VERSION(DRV_VERSION);
+
+#define DEFAULT_MSG_ENABLE (NETIF_MSG_DRV|NETIF_MSG_PROBE|NETIF_MSG_LINK)
+static int debug = -1;
+module_param(debug, int, 0);
+MODULE_PARM_DESC(debug, "Debug level (0=none,...,16=all)");
+
+/**
+ * ixgb_init_module - Driver Registration Routine
+ *
+ * ixgb_init_module is the first routine called when the driver is
+ * loaded. All it does is register with the PCI subsystem.
+ **/
+
+static int __init
+ixgb_init_module(void)
+{
+ pr_info("%s - version %s\n", ixgb_driver_string, ixgb_driver_version);
+ pr_info("%s\n", ixgb_copyright);
+
+ return pci_register_driver(&ixgb_driver);
+}
+
+module_init(ixgb_init_module);
+
+/**
+ * ixgb_exit_module - Driver Exit Cleanup Routine
+ *
+ * ixgb_exit_module is called just before the driver is removed
+ * from memory.
+ **/
+
+static void __exit
+ixgb_exit_module(void)
+{
+ pci_unregister_driver(&ixgb_driver);
+}
+
+module_exit(ixgb_exit_module);
+
+/**
+ * ixgb_irq_disable - Mask off interrupt generation on the NIC
+ * @adapter: board private structure
+ **/
+
+static void
+ixgb_irq_disable(struct ixgb_adapter *adapter)
+{
+ IXGB_WRITE_REG(&adapter->hw, IMC, ~0);
+ IXGB_WRITE_FLUSH(&adapter->hw);
+ synchronize_irq(adapter->pdev->irq);
+}
+
+/**
+ * ixgb_irq_enable - Enable default interrupt generation settings
+ * @adapter: board private structure
+ **/
+
+static void
+ixgb_irq_enable(struct ixgb_adapter *adapter)
+{
+ u32 val = IXGB_INT_RXT0 | IXGB_INT_RXDMT0 |
+ IXGB_INT_TXDW | IXGB_INT_LSC;
+ if (adapter->hw.subsystem_vendor_id == PCI_VENDOR_ID_SUN)
+ val |= IXGB_INT_GPI0;
+ IXGB_WRITE_REG(&adapter->hw, IMS, val);
+ IXGB_WRITE_FLUSH(&adapter->hw);
+}
+
+int
+ixgb_up(struct ixgb_adapter *adapter)
+{
+ struct net_device *netdev = adapter->netdev;
+ int err, irq_flags = IRQF_SHARED;
+ int max_frame = netdev->mtu + ENET_HEADER_SIZE + ENET_FCS_LENGTH;
+ struct ixgb_hw *hw = &adapter->hw;
+
+ /* hardware has been reset, we need to reload some things */
+
+ ixgb_rar_set(hw, netdev->dev_addr, 0);
+ ixgb_set_multi(netdev);
+
+ ixgb_restore_vlan(adapter);
+
+ ixgb_configure_tx(adapter);
+ ixgb_setup_rctl(adapter);
+ ixgb_configure_rx(adapter);
+ ixgb_alloc_rx_buffers(adapter, IXGB_DESC_UNUSED(&adapter->rx_ring));
+
+ /* disable interrupts and get the hardware into a known state */
+ IXGB_WRITE_REG(&adapter->hw, IMC, 0xffffffff);
+
+ /* only enable MSI if bus is in PCI-X mode */
+ if (IXGB_READ_REG(&adapter->hw, STATUS) & IXGB_STATUS_PCIX_MODE) {
+ err = pci_enable_msi(adapter->pdev);
+ if (!err) {
+ adapter->have_msi = true;
+ irq_flags = 0;
+ }
+ /* proceed to try to request regular interrupt */
+ }
+
+ err = request_irq(adapter->pdev->irq, ixgb_intr, irq_flags,
+ netdev->name, netdev);
+ if (err) {
+ if (adapter->have_msi)
+ pci_disable_msi(adapter->pdev);
+ netif_err(adapter, probe, adapter->netdev,
+ "Unable to allocate interrupt Error: %d\n", err);
+ return err;
+ }
+
+ if ((hw->max_frame_size != max_frame) ||
+ (hw->max_frame_size !=
+ (IXGB_READ_REG(hw, MFS) >> IXGB_MFS_SHIFT))) {
+
+ hw->max_frame_size = max_frame;
+
+ IXGB_WRITE_REG(hw, MFS, hw->max_frame_size << IXGB_MFS_SHIFT);
+
+ if (hw->max_frame_size >
+ IXGB_MAX_ENET_FRAME_SIZE_WITHOUT_FCS + ENET_FCS_LENGTH) {
+ u32 ctrl0 = IXGB_READ_REG(hw, CTRL0);
+
+ if (!(ctrl0 & IXGB_CTRL0_JFE)) {
+ ctrl0 |= IXGB_CTRL0_JFE;
+ IXGB_WRITE_REG(hw, CTRL0, ctrl0);
+ }
+ }
+ }
+
+ clear_bit(__IXGB_DOWN, &adapter->flags);
+
+ napi_enable(&adapter->napi);
+ ixgb_irq_enable(adapter);
+
+ netif_wake_queue(netdev);
+
+ mod_timer(&adapter->watchdog_timer, jiffies);
+
+ return 0;
+}
+
+void
+ixgb_down(struct ixgb_adapter *adapter, bool kill_watchdog)
+{
+ struct net_device *netdev = adapter->netdev;
+
+ /* prevent the interrupt handler from restarting watchdog */
+ set_bit(__IXGB_DOWN, &adapter->flags);
+
+ netif_carrier_off(netdev);
+
+ napi_disable(&adapter->napi);
+ /* waiting for NAPI to complete can re-enable interrupts */
+ ixgb_irq_disable(adapter);
+ free_irq(adapter->pdev->irq, netdev);
+
+ if (adapter->have_msi)
+ pci_disable_msi(adapter->pdev);
+
+ if (kill_watchdog)
+ del_timer_sync(&adapter->watchdog_timer);
+
+ adapter->link_speed = 0;
+ adapter->link_duplex = 0;
+ netif_stop_queue(netdev);
+
+ ixgb_reset(adapter);
+ ixgb_clean_tx_ring(adapter);
+ ixgb_clean_rx_ring(adapter);
+}
+
+void
+ixgb_reset(struct ixgb_adapter *adapter)
+{
+ struct ixgb_hw *hw = &adapter->hw;
+
+ ixgb_adapter_stop(hw);
+ if (!ixgb_init_hw(hw))
+ netif_err(adapter, probe, adapter->netdev, "ixgb_init_hw failed\n");
+
+ /* restore frame size information */
+ IXGB_WRITE_REG(hw, MFS, hw->max_frame_size << IXGB_MFS_SHIFT);
+ if (hw->max_frame_size >
+ IXGB_MAX_ENET_FRAME_SIZE_WITHOUT_FCS + ENET_FCS_LENGTH) {
+ u32 ctrl0 = IXGB_READ_REG(hw, CTRL0);
+ if (!(ctrl0 & IXGB_CTRL0_JFE)) {
+ ctrl0 |= IXGB_CTRL0_JFE;
+ IXGB_WRITE_REG(hw, CTRL0, ctrl0);
+ }
+ }
+}
+
+static netdev_features_t
+ixgb_fix_features(struct net_device *netdev, netdev_features_t features)
+{
+ /*
+ * Tx VLAN insertion does not work per HW design when Rx stripping is
+ * disabled.
+ */
+ if (!(features & NETIF_F_HW_VLAN_CTAG_RX))
+ features &= ~NETIF_F_HW_VLAN_CTAG_TX;
+
+ return features;
+}
+
+static int
+ixgb_set_features(struct net_device *netdev, netdev_features_t features)
+{
+ struct ixgb_adapter *adapter = netdev_priv(netdev);
+ netdev_features_t changed = features ^ netdev->features;
+
+ if (!(changed & (NETIF_F_RXCSUM|NETIF_F_HW_VLAN_CTAG_RX)))
+ return 0;
+
+ adapter->rx_csum = !!(features & NETIF_F_RXCSUM);
+
+ if (netif_running(netdev)) {
+ ixgb_down(adapter, true);
+ ixgb_up(adapter);
+ ixgb_set_speed_duplex(netdev);
+ } else
+ ixgb_reset(adapter);
+
+ return 0;
+}
+
+
+static const struct net_device_ops ixgb_netdev_ops = {
+ .ndo_open = ixgb_open,
+ .ndo_stop = ixgb_close,
+ .ndo_start_xmit = ixgb_xmit_frame,
+ .ndo_get_stats = ixgb_get_stats,
+ .ndo_set_rx_mode = ixgb_set_multi,
+ .ndo_validate_addr = eth_validate_addr,
+ .ndo_set_mac_address = ixgb_set_mac,
+ .ndo_change_mtu = ixgb_change_mtu,
+ .ndo_tx_timeout = ixgb_tx_timeout,
+ .ndo_vlan_rx_add_vid = ixgb_vlan_rx_add_vid,
+ .ndo_vlan_rx_kill_vid = ixgb_vlan_rx_kill_vid,
+#ifdef CONFIG_NET_POLL_CONTROLLER
+ .ndo_poll_controller = ixgb_netpoll,
+#endif
+ .ndo_fix_features = ixgb_fix_features,
+ .ndo_set_features = ixgb_set_features,
+};
+
+/**
+ * ixgb_probe - Device Initialization Routine
+ * @pdev: PCI device information struct
+ * @ent: entry in ixgb_pci_tbl
+ *
+ * Returns 0 on success, negative on failure
+ *
+ * ixgb_probe initializes an adapter identified by a pci_dev structure.
+ * The OS initialization, configuring of the adapter private structure,
+ * and a hardware reset occur.
+ **/
+
+static int
+ixgb_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
+{
+ struct net_device *netdev = NULL;
+ struct ixgb_adapter *adapter;
+ static int cards_found = 0;
+ int pci_using_dac;
+ int i;
+ int err;
+
+ err = pci_enable_device(pdev);
+ if (err)
+ return err;
+
+ pci_using_dac = 0;
+ err = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(64));
+ if (!err) {
+ pci_using_dac = 1;
+ } else {
+ err = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32));
+ if (err) {
+ pr_err("No usable DMA configuration, aborting\n");
+ goto err_dma_mask;
+ }
+ }
+
+ err = pci_request_regions(pdev, ixgb_driver_name);
+ if (err)
+ goto err_request_regions;
+
+ pci_set_master(pdev);
+
+ netdev = alloc_etherdev(sizeof(struct ixgb_adapter));
+ if (!netdev) {
+ err = -ENOMEM;
+ goto err_alloc_etherdev;
+ }
+
+ SET_NETDEV_DEV(netdev, &pdev->dev);
+
+ pci_set_drvdata(pdev, netdev);
+ adapter = netdev_priv(netdev);
+ adapter->netdev = netdev;
+ adapter->pdev = pdev;
+ adapter->hw.back = adapter;
+ adapter->msg_enable = netif_msg_init(debug, DEFAULT_MSG_ENABLE);
+
+ adapter->hw.hw_addr = pci_ioremap_bar(pdev, BAR_0);
+ if (!adapter->hw.hw_addr) {
+ err = -EIO;
+ goto err_ioremap;
+ }
+
+ for (i = BAR_1; i <= BAR_5; i++) {
+ if (pci_resource_len(pdev, i) == 0)
+ continue;
+ if (pci_resource_flags(pdev, i) & IORESOURCE_IO) {
+ adapter->hw.io_base = pci_resource_start(pdev, i);
+ break;
+ }
+ }
+
+ netdev->netdev_ops = &ixgb_netdev_ops;
+ ixgb_set_ethtool_ops(netdev);
+ netdev->watchdog_timeo = 5 * HZ;
+ netif_napi_add(netdev, &adapter->napi, ixgb_clean, 64);
+
+ strncpy(netdev->name, pci_name(pdev), sizeof(netdev->name) - 1);
+
+ adapter->bd_number = cards_found;
+ adapter->link_speed = 0;
+ adapter->link_duplex = 0;
+
+ /* setup the private structure */
+
+ err = ixgb_sw_init(adapter);
+ if (err)
+ goto err_sw_init;
+
+ netdev->hw_features = NETIF_F_SG |
+ NETIF_F_TSO |
+ NETIF_F_HW_CSUM |
+ NETIF_F_HW_VLAN_CTAG_TX |
+ NETIF_F_HW_VLAN_CTAG_RX;
+ netdev->features = netdev->hw_features |
+ NETIF_F_HW_VLAN_CTAG_FILTER;
+ netdev->hw_features |= NETIF_F_RXCSUM;
+
+ if (pci_using_dac) {
+ netdev->features |= NETIF_F_HIGHDMA;
+ netdev->vlan_features |= NETIF_F_HIGHDMA;
+ }
+
+ /* make sure the EEPROM is good */
+
+ if (!ixgb_validate_eeprom_checksum(&adapter->hw)) {
+ netif_err(adapter, probe, adapter->netdev,
+ "The EEPROM Checksum Is Not Valid\n");
+ err = -EIO;
+ goto err_eeprom;
+ }
+
+ ixgb_get_ee_mac_addr(&adapter->hw, netdev->dev_addr);
+
+ if (!is_valid_ether_addr(netdev->dev_addr)) {
+ netif_err(adapter, probe, adapter->netdev, "Invalid MAC Address\n");
+ err = -EIO;
+ goto err_eeprom;
+ }
+
+ adapter->part_num = ixgb_get_ee_pba_number(&adapter->hw);
+
+ init_timer(&adapter->watchdog_timer);
+ adapter->watchdog_timer.function = ixgb_watchdog;
+ adapter->watchdog_timer.data = (unsigned long)adapter;
+
+ INIT_WORK(&adapter->tx_timeout_task, ixgb_tx_timeout_task);
+
+ strcpy(netdev->name, "eth%d");
+ err = register_netdev(netdev);
+ if (err)
+ goto err_register;
+
+ /* carrier off reporting is important to ethtool even BEFORE open */
+ netif_carrier_off(netdev);
+
+ netif_info(adapter, probe, adapter->netdev,
+ "Intel(R) PRO/10GbE Network Connection\n");
+ ixgb_check_options(adapter);
+ /* reset the hardware with the new settings */
+
+ ixgb_reset(adapter);
+
+ cards_found++;
+ return 0;
+
+err_register:
+err_sw_init:
+err_eeprom:
+ iounmap(adapter->hw.hw_addr);
+err_ioremap:
+ free_netdev(netdev);
+err_alloc_etherdev:
+ pci_release_regions(pdev);
+err_request_regions:
+err_dma_mask:
+ pci_disable_device(pdev);
+ return err;
+}
+
+/**
+ * ixgb_remove - Device Removal Routine
+ * @pdev: PCI device information struct
+ *
+ * ixgb_remove is called by the PCI subsystem to alert the driver
+ * that it should release a PCI device. The could be caused by a
+ * Hot-Plug event, or because the driver is going to be removed from
+ * memory.
+ **/
+
+static void
+ixgb_remove(struct pci_dev *pdev)
+{
+ struct net_device *netdev = pci_get_drvdata(pdev);
+ struct ixgb_adapter *adapter = netdev_priv(netdev);
+
+ cancel_work_sync(&adapter->tx_timeout_task);
+
+ unregister_netdev(netdev);
+
+ iounmap(adapter->hw.hw_addr);
+ pci_release_regions(pdev);
+
+ free_netdev(netdev);
+ pci_disable_device(pdev);
+}
+
+/**
+ * ixgb_sw_init - Initialize general software structures (struct ixgb_adapter)
+ * @adapter: board private structure to initialize
+ *
+ * ixgb_sw_init initializes the Adapter private data structure.
+ * Fields are initialized based on PCI device information and
+ * OS network device settings (MTU size).
+ **/
+
+static int
+ixgb_sw_init(struct ixgb_adapter *adapter)
+{
+ struct ixgb_hw *hw = &adapter->hw;
+ struct net_device *netdev = adapter->netdev;
+ struct pci_dev *pdev = adapter->pdev;
+
+ /* PCI config space info */
+
+ hw->vendor_id = pdev->vendor;
+ hw->device_id = pdev->device;
+ hw->subsystem_vendor_id = pdev->subsystem_vendor;
+ hw->subsystem_id = pdev->subsystem_device;
+
+ hw->max_frame_size = netdev->mtu + ENET_HEADER_SIZE + ENET_FCS_LENGTH;
+ adapter->rx_buffer_len = hw->max_frame_size + 8; /* + 8 for errata */
+
+ if ((hw->device_id == IXGB_DEVICE_ID_82597EX) ||
+ (hw->device_id == IXGB_DEVICE_ID_82597EX_CX4) ||
+ (hw->device_id == IXGB_DEVICE_ID_82597EX_LR) ||
+ (hw->device_id == IXGB_DEVICE_ID_82597EX_SR))
+ hw->mac_type = ixgb_82597;
+ else {
+ /* should never have loaded on this device */
+ netif_err(adapter, probe, adapter->netdev, "unsupported device id\n");
+ }
+
+ /* enable flow control to be programmed */
+ hw->fc.send_xon = 1;
+
+ set_bit(__IXGB_DOWN, &adapter->flags);
+ return 0;
+}
+
+/**
+ * ixgb_open - Called when a network interface is made active
+ * @netdev: network interface device structure
+ *
+ * Returns 0 on success, negative value on failure
+ *
+ * The open entry point is called when a network interface is made
+ * active by the system (IFF_UP). At this point all resources needed
+ * for transmit and receive operations are allocated, the interrupt
+ * handler is registered with the OS, the watchdog timer is started,
+ * and the stack is notified that the interface is ready.
+ **/
+
+static int
+ixgb_open(struct net_device *netdev)
+{
+ struct ixgb_adapter *adapter = netdev_priv(netdev);
+ int err;
+
+ /* allocate transmit descriptors */
+ err = ixgb_setup_tx_resources(adapter);
+ if (err)
+ goto err_setup_tx;
+
+ netif_carrier_off(netdev);
+
+ /* allocate receive descriptors */
+
+ err = ixgb_setup_rx_resources(adapter);
+ if (err)
+ goto err_setup_rx;
+
+ err = ixgb_up(adapter);
+ if (err)
+ goto err_up;
+
+ netif_start_queue(netdev);
+
+ return 0;
+
+err_up:
+ ixgb_free_rx_resources(adapter);
+err_setup_rx:
+ ixgb_free_tx_resources(adapter);
+err_setup_tx:
+ ixgb_reset(adapter);
+
+ return err;
+}
+
+/**
+ * ixgb_close - Disables a network interface
+ * @netdev: network interface device structure
+ *
+ * Returns 0, this is not allowed to fail
+ *
+ * The close entry point is called when an interface is de-activated
+ * by the OS. The hardware is still under the drivers control, but
+ * needs to be disabled. A global MAC reset is issued to stop the
+ * hardware, and all transmit and receive resources are freed.
+ **/
+
+static int
+ixgb_close(struct net_device *netdev)
+{
+ struct ixgb_adapter *adapter = netdev_priv(netdev);
+
+ ixgb_down(adapter, true);
+
+ ixgb_free_tx_resources(adapter);
+ ixgb_free_rx_resources(adapter);
+
+ return 0;
+}
+
+/**
+ * ixgb_setup_tx_resources - allocate Tx resources (Descriptors)
+ * @adapter: board private structure
+ *
+ * Return 0 on success, negative on failure
+ **/
+
+int
+ixgb_setup_tx_resources(struct ixgb_adapter *adapter)
+{
+ struct ixgb_desc_ring *txdr = &adapter->tx_ring;
+ struct pci_dev *pdev = adapter->pdev;
+ int size;
+
+ size = sizeof(struct ixgb_buffer) * txdr->count;
+ txdr->buffer_info = vzalloc(size);
+ if (!txdr->buffer_info)
+ return -ENOMEM;
+
+ /* round up to nearest 4K */
+
+ txdr->size = txdr->count * sizeof(struct ixgb_tx_desc);
+ txdr->size = ALIGN(txdr->size, 4096);
+
+ txdr->desc = dma_zalloc_coherent(&pdev->dev, txdr->size, &txdr->dma,
+ GFP_KERNEL);
+ if (!txdr->desc) {
+ vfree(txdr->buffer_info);
+ return -ENOMEM;
+ }
+
+ txdr->next_to_use = 0;
+ txdr->next_to_clean = 0;
+
+ return 0;
+}
+
+/**
+ * ixgb_configure_tx - Configure 82597 Transmit Unit after Reset.
+ * @adapter: board private structure
+ *
+ * Configure the Tx unit of the MAC after a reset.
+ **/
+
+static void
+ixgb_configure_tx(struct ixgb_adapter *adapter)
+{
+ u64 tdba = adapter->tx_ring.dma;
+ u32 tdlen = adapter->tx_ring.count * sizeof(struct ixgb_tx_desc);
+ u32 tctl;
+ struct ixgb_hw *hw = &adapter->hw;
+
+ /* Setup the Base and Length of the Tx Descriptor Ring
+ * tx_ring.dma can be either a 32 or 64 bit value
+ */
+
+ IXGB_WRITE_REG(hw, TDBAL, (tdba & 0x00000000ffffffffULL));
+ IXGB_WRITE_REG(hw, TDBAH, (tdba >> 32));
+
+ IXGB_WRITE_REG(hw, TDLEN, tdlen);
+
+ /* Setup the HW Tx Head and Tail descriptor pointers */
+
+ IXGB_WRITE_REG(hw, TDH, 0);
+ IXGB_WRITE_REG(hw, TDT, 0);
+
+ /* don't set up txdctl, it induces performance problems if configured
+ * incorrectly */
+ /* Set the Tx Interrupt Delay register */
+
+ IXGB_WRITE_REG(hw, TIDV, adapter->tx_int_delay);
+
+ /* Program the Transmit Control Register */
+
+ tctl = IXGB_TCTL_TCE | IXGB_TCTL_TXEN | IXGB_TCTL_TPDE;
+ IXGB_WRITE_REG(hw, TCTL, tctl);
+
+ /* Setup Transmit Descriptor Settings for this adapter */
+ adapter->tx_cmd_type =
+ IXGB_TX_DESC_TYPE |
+ (adapter->tx_int_delay_enable ? IXGB_TX_DESC_CMD_IDE : 0);
+}
+
+/**
+ * ixgb_setup_rx_resources - allocate Rx resources (Descriptors)
+ * @adapter: board private structure
+ *
+ * Returns 0 on success, negative on failure
+ **/
+
+int
+ixgb_setup_rx_resources(struct ixgb_adapter *adapter)
+{
+ struct ixgb_desc_ring *rxdr = &adapter->rx_ring;
+ struct pci_dev *pdev = adapter->pdev;
+ int size;
+
+ size = sizeof(struct ixgb_buffer) * rxdr->count;
+ rxdr->buffer_info = vzalloc(size);
+ if (!rxdr->buffer_info)
+ return -ENOMEM;
+
+ /* Round up to nearest 4K */
+
+ rxdr->size = rxdr->count * sizeof(struct ixgb_rx_desc);
+ rxdr->size = ALIGN(rxdr->size, 4096);
+
+ rxdr->desc = dma_alloc_coherent(&pdev->dev, rxdr->size, &rxdr->dma,
+ GFP_KERNEL);
+
+ if (!rxdr->desc) {
+ vfree(rxdr->buffer_info);
+ return -ENOMEM;
+ }
+ memset(rxdr->desc, 0, rxdr->size);
+
+ rxdr->next_to_clean = 0;
+ rxdr->next_to_use = 0;
+
+ return 0;
+}
+
+/**
+ * ixgb_setup_rctl - configure the receive control register
+ * @adapter: Board private structure
+ **/
+
+static void
+ixgb_setup_rctl(struct ixgb_adapter *adapter)
+{
+ u32 rctl;
+
+ rctl = IXGB_READ_REG(&adapter->hw, RCTL);
+
+ rctl &= ~(3 << IXGB_RCTL_MO_SHIFT);
+
+ rctl |=
+ IXGB_RCTL_BAM | IXGB_RCTL_RDMTS_1_2 |
+ IXGB_RCTL_RXEN | IXGB_RCTL_CFF |
+ (adapter->hw.mc_filter_type << IXGB_RCTL_MO_SHIFT);
+
+ rctl |= IXGB_RCTL_SECRC;
+
+ if (adapter->rx_buffer_len <= IXGB_RXBUFFER_2048)
+ rctl |= IXGB_RCTL_BSIZE_2048;
+ else if (adapter->rx_buffer_len <= IXGB_RXBUFFER_4096)
+ rctl |= IXGB_RCTL_BSIZE_4096;
+ else if (adapter->rx_buffer_len <= IXGB_RXBUFFER_8192)
+ rctl |= IXGB_RCTL_BSIZE_8192;
+ else if (adapter->rx_buffer_len <= IXGB_RXBUFFER_16384)
+ rctl |= IXGB_RCTL_BSIZE_16384;
+
+ IXGB_WRITE_REG(&adapter->hw, RCTL, rctl);
+}
+
+/**
+ * ixgb_configure_rx - Configure 82597 Receive Unit after Reset.
+ * @adapter: board private structure
+ *
+ * Configure the Rx unit of the MAC after a reset.
+ **/
+
+static void
+ixgb_configure_rx(struct ixgb_adapter *adapter)
+{
+ u64 rdba = adapter->rx_ring.dma;
+ u32 rdlen = adapter->rx_ring.count * sizeof(struct ixgb_rx_desc);
+ struct ixgb_hw *hw = &adapter->hw;
+ u32 rctl;
+ u32 rxcsum;
+
+ /* make sure receives are disabled while setting up the descriptors */
+
+ rctl = IXGB_READ_REG(hw, RCTL);
+ IXGB_WRITE_REG(hw, RCTL, rctl & ~IXGB_RCTL_RXEN);
+
+ /* set the Receive Delay Timer Register */
+
+ IXGB_WRITE_REG(hw, RDTR, adapter->rx_int_delay);
+
+ /* Setup the Base and Length of the Rx Descriptor Ring */
+
+ IXGB_WRITE_REG(hw, RDBAL, (rdba & 0x00000000ffffffffULL));
+ IXGB_WRITE_REG(hw, RDBAH, (rdba >> 32));
+
+ IXGB_WRITE_REG(hw, RDLEN, rdlen);
+
+ /* Setup the HW Rx Head and Tail Descriptor Pointers */
+ IXGB_WRITE_REG(hw, RDH, 0);
+ IXGB_WRITE_REG(hw, RDT, 0);
+
+ /* due to the hardware errata with RXDCTL, we are unable to use any of
+ * the performance enhancing features of it without causing other
+ * subtle bugs, some of the bugs could include receive length
+ * corruption at high data rates (WTHRESH > 0) and/or receive
+ * descriptor ring irregularites (particularly in hardware cache) */
+ IXGB_WRITE_REG(hw, RXDCTL, 0);
+
+ /* Enable Receive Checksum Offload for TCP and UDP */
+ if (adapter->rx_csum) {
+ rxcsum = IXGB_READ_REG(hw, RXCSUM);
+ rxcsum |= IXGB_RXCSUM_TUOFL;
+ IXGB_WRITE_REG(hw, RXCSUM, rxcsum);
+ }
+
+ /* Enable Receives */
+
+ IXGB_WRITE_REG(hw, RCTL, rctl);
+}
+
+/**
+ * ixgb_free_tx_resources - Free Tx Resources
+ * @adapter: board private structure
+ *
+ * Free all transmit software resources
+ **/
+
+void
+ixgb_free_tx_resources(struct ixgb_adapter *adapter)
+{
+ struct pci_dev *pdev = adapter->pdev;
+
+ ixgb_clean_tx_ring(adapter);
+
+ vfree(adapter->tx_ring.buffer_info);
+ adapter->tx_ring.buffer_info = NULL;
+
+ dma_free_coherent(&pdev->dev, adapter->tx_ring.size,
+ adapter->tx_ring.desc, adapter->tx_ring.dma);
+
+ adapter->tx_ring.desc = NULL;
+}
+
+static void
+ixgb_unmap_and_free_tx_resource(struct ixgb_adapter *adapter,
+ struct ixgb_buffer *buffer_info)
+{
+ if (buffer_info->dma) {
+ if (buffer_info->mapped_as_page)
+ dma_unmap_page(&adapter->pdev->dev, buffer_info->dma,
+ buffer_info->length, DMA_TO_DEVICE);
+ else
+ dma_unmap_single(&adapter->pdev->dev, buffer_info->dma,
+ buffer_info->length, DMA_TO_DEVICE);
+ buffer_info->dma = 0;
+ }
+
+ if (buffer_info->skb) {
+ dev_kfree_skb_any(buffer_info->skb);
+ buffer_info->skb = NULL;
+ }
+ buffer_info->time_stamp = 0;
+ /* these fields must always be initialized in tx
+ * buffer_info->length = 0;
+ * buffer_info->next_to_watch = 0; */
+}
+
+/**
+ * ixgb_clean_tx_ring - Free Tx Buffers
+ * @adapter: board private structure
+ **/
+
+static void
+ixgb_clean_tx_ring(struct ixgb_adapter *adapter)
+{
+ struct ixgb_desc_ring *tx_ring = &adapter->tx_ring;
+ struct ixgb_buffer *buffer_info;
+ unsigned long size;
+ unsigned int i;
+
+ /* Free all the Tx ring sk_buffs */
+
+ for (i = 0; i < tx_ring->count; i++) {
+ buffer_info = &tx_ring->buffer_info[i];
+ ixgb_unmap_and_free_tx_resource(adapter, buffer_info);
+ }
+
+ size = sizeof(struct ixgb_buffer) * tx_ring->count;
+ memset(tx_ring->buffer_info, 0, size);
+
+ /* Zero out the descriptor ring */
+
+ memset(tx_ring->desc, 0, tx_ring->size);
+
+ tx_ring->next_to_use = 0;
+ tx_ring->next_to_clean = 0;
+
+ IXGB_WRITE_REG(&adapter->hw, TDH, 0);
+ IXGB_WRITE_REG(&adapter->hw, TDT, 0);
+}
+
+/**
+ * ixgb_free_rx_resources - Free Rx Resources
+ * @adapter: board private structure
+ *
+ * Free all receive software resources
+ **/
+
+void
+ixgb_free_rx_resources(struct ixgb_adapter *adapter)
+{
+ struct ixgb_desc_ring *rx_ring = &adapter->rx_ring;
+ struct pci_dev *pdev = adapter->pdev;
+
+ ixgb_clean_rx_ring(adapter);
+
+ vfree(rx_ring->buffer_info);
+ rx_ring->buffer_info = NULL;
+
+ dma_free_coherent(&pdev->dev, rx_ring->size, rx_ring->desc,
+ rx_ring->dma);
+
+ rx_ring->desc = NULL;
+}
+
+/**
+ * ixgb_clean_rx_ring - Free Rx Buffers
+ * @adapter: board private structure
+ **/
+
+static void
+ixgb_clean_rx_ring(struct ixgb_adapter *adapter)
+{
+ struct ixgb_desc_ring *rx_ring = &adapter->rx_ring;
+ struct ixgb_buffer *buffer_info;
+ struct pci_dev *pdev = adapter->pdev;
+ unsigned long size;
+ unsigned int i;
+
+ /* Free all the Rx ring sk_buffs */
+
+ for (i = 0; i < rx_ring->count; i++) {
+ buffer_info = &rx_ring->buffer_info[i];
+ if (buffer_info->dma) {
+ dma_unmap_single(&pdev->dev,
+ buffer_info->dma,
+ buffer_info->length,
+ DMA_FROM_DEVICE);
+ buffer_info->dma = 0;
+ buffer_info->length = 0;
+ }
+
+ if (buffer_info->skb) {
+ dev_kfree_skb(buffer_info->skb);
+ buffer_info->skb = NULL;
+ }
+ }
+
+ size = sizeof(struct ixgb_buffer) * rx_ring->count;
+ memset(rx_ring->buffer_info, 0, size);
+
+ /* Zero out the descriptor ring */
+
+ memset(rx_ring->desc, 0, rx_ring->size);
+
+ rx_ring->next_to_clean = 0;
+ rx_ring->next_to_use = 0;
+
+ IXGB_WRITE_REG(&adapter->hw, RDH, 0);
+ IXGB_WRITE_REG(&adapter->hw, RDT, 0);
+}
+
+/**
+ * ixgb_set_mac - Change the Ethernet Address of the NIC
+ * @netdev: network interface device structure
+ * @p: pointer to an address structure
+ *
+ * Returns 0 on success, negative on failure
+ **/
+
+static int
+ixgb_set_mac(struct net_device *netdev, void *p)
+{
+ struct ixgb_adapter *adapter = netdev_priv(netdev);
+ struct sockaddr *addr = p;
+
+ if (!is_valid_ether_addr(addr->sa_data))
+ return -EADDRNOTAVAIL;
+
+ memcpy(netdev->dev_addr, addr->sa_data, netdev->addr_len);
+
+ ixgb_rar_set(&adapter->hw, addr->sa_data, 0);
+
+ return 0;
+}
+
+/**
+ * ixgb_set_multi - Multicast and Promiscuous mode set
+ * @netdev: network interface device structure
+ *
+ * The set_multi entry point is called whenever the multicast address
+ * list or the network interface flags are updated. This routine is
+ * responsible for configuring the hardware for proper multicast,
+ * promiscuous mode, and all-multi behavior.
+ **/
+
+static void
+ixgb_set_multi(struct net_device *netdev)
+{
+ struct ixgb_adapter *adapter = netdev_priv(netdev);
+ struct ixgb_hw *hw = &adapter->hw;
+ struct netdev_hw_addr *ha;
+ u32 rctl;
+
+ /* Check for Promiscuous and All Multicast modes */
+
+ rctl = IXGB_READ_REG(hw, RCTL);
+
+ if (netdev->flags & IFF_PROMISC) {
+ rctl |= (IXGB_RCTL_UPE | IXGB_RCTL_MPE);
+ /* disable VLAN filtering */
+ rctl &= ~IXGB_RCTL_CFIEN;
+ rctl &= ~IXGB_RCTL_VFE;
+ } else {
+ if (netdev->flags & IFF_ALLMULTI) {
+ rctl |= IXGB_RCTL_MPE;
+ rctl &= ~IXGB_RCTL_UPE;
+ } else {
+ rctl &= ~(IXGB_RCTL_UPE | IXGB_RCTL_MPE);
+ }
+ /* enable VLAN filtering */
+ rctl |= IXGB_RCTL_VFE;
+ rctl &= ~IXGB_RCTL_CFIEN;
+ }
+
+ if (netdev_mc_count(netdev) > IXGB_MAX_NUM_MULTICAST_ADDRESSES) {
+ rctl |= IXGB_RCTL_MPE;
+ IXGB_WRITE_REG(hw, RCTL, rctl);
+ } else {
+ u8 *mta = kmalloc(IXGB_MAX_NUM_MULTICAST_ADDRESSES *
+ ETH_ALEN, GFP_ATOMIC);
+ u8 *addr;
+ if (!mta)
+ goto alloc_failed;
+
+ IXGB_WRITE_REG(hw, RCTL, rctl);
+
+ addr = mta;
+ netdev_for_each_mc_addr(ha, netdev) {
+ memcpy(addr, ha->addr, ETH_ALEN);
+ addr += ETH_ALEN;
+ }
+
+ ixgb_mc_addr_list_update(hw, mta, netdev_mc_count(netdev), 0);
+ kfree(mta);
+ }
+
+alloc_failed:
+ if (netdev->features & NETIF_F_HW_VLAN_CTAG_RX)
+ ixgb_vlan_strip_enable(adapter);
+ else
+ ixgb_vlan_strip_disable(adapter);
+
+}
+
+/**
+ * ixgb_watchdog - Timer Call-back
+ * @data: pointer to netdev cast into an unsigned long
+ **/
+
+static void
+ixgb_watchdog(unsigned long data)
+{
+ struct ixgb_adapter *adapter = (struct ixgb_adapter *)data;
+ struct net_device *netdev = adapter->netdev;
+ struct ixgb_desc_ring *txdr = &adapter->tx_ring;
+
+ ixgb_check_for_link(&adapter->hw);
+
+ if (ixgb_check_for_bad_link(&adapter->hw)) {
+ /* force the reset path */
+ netif_stop_queue(netdev);
+ }
+
+ if (adapter->hw.link_up) {
+ if (!netif_carrier_ok(netdev)) {
+ netdev_info(netdev,
+ "NIC Link is Up 10 Gbps Full Duplex, Flow Control: %s\n",
+ (adapter->hw.fc.type == ixgb_fc_full) ?
+ "RX/TX" :
+ (adapter->hw.fc.type == ixgb_fc_rx_pause) ?
+ "RX" :
+ (adapter->hw.fc.type == ixgb_fc_tx_pause) ?
+ "TX" : "None");
+ adapter->link_speed = 10000;
+ adapter->link_duplex = FULL_DUPLEX;
+ netif_carrier_on(netdev);
+ }
+ } else {
+ if (netif_carrier_ok(netdev)) {
+ adapter->link_speed = 0;
+ adapter->link_duplex = 0;
+ netdev_info(netdev, "NIC Link is Down\n");
+ netif_carrier_off(netdev);
+ }
+ }
+
+ ixgb_update_stats(adapter);
+
+ if (!netif_carrier_ok(netdev)) {
+ if (IXGB_DESC_UNUSED(txdr) + 1 < txdr->count) {
+ /* We've lost link, so the controller stops DMA,
+ * but we've got queued Tx work that's never going
+ * to get done, so reset controller to flush Tx.
+ * (Do the reset outside of interrupt context). */
+ schedule_work(&adapter->tx_timeout_task);
+ /* return immediately since reset is imminent */
+ return;
+ }
+ }
+
+ /* Force detection of hung controller every watchdog period */
+ adapter->detect_tx_hung = true;
+
+ /* generate an interrupt to force clean up of any stragglers */
+ IXGB_WRITE_REG(&adapter->hw, ICS, IXGB_INT_TXDW);
+
+ /* Reset the timer */
+ mod_timer(&adapter->watchdog_timer, jiffies + 2 * HZ);
+}
+
+#define IXGB_TX_FLAGS_CSUM 0x00000001
+#define IXGB_TX_FLAGS_VLAN 0x00000002
+#define IXGB_TX_FLAGS_TSO 0x00000004
+
+static int
+ixgb_tso(struct ixgb_adapter *adapter, struct sk_buff *skb)
+{
+ struct ixgb_context_desc *context_desc;
+ unsigned int i;
+ u8 ipcss, ipcso, tucss, tucso, hdr_len;
+ u16 ipcse, tucse, mss;
+
+ if (likely(skb_is_gso(skb))) {
+ struct ixgb_buffer *buffer_info;
+ struct iphdr *iph;
+ int err;
+
+ err = skb_cow_head(skb, 0);
+ if (err < 0)
+ return err;
+
+ hdr_len = skb_transport_offset(skb) + tcp_hdrlen(skb);
+ mss = skb_shinfo(skb)->gso_size;
+ iph = ip_hdr(skb);
+ iph->tot_len = 0;
+ iph->check = 0;
+ tcp_hdr(skb)->check = ~csum_tcpudp_magic(iph->saddr,
+ iph->daddr, 0,
+ IPPROTO_TCP, 0);
+ ipcss = skb_network_offset(skb);
+ ipcso = (void *)&(iph->check) - (void *)skb->data;
+ ipcse = skb_transport_offset(skb) - 1;
+ tucss = skb_transport_offset(skb);
+ tucso = (void *)&(tcp_hdr(skb)->check) - (void *)skb->data;
+ tucse = 0;
+
+ i = adapter->tx_ring.next_to_use;
+ context_desc = IXGB_CONTEXT_DESC(adapter->tx_ring, i);
+ buffer_info = &adapter->tx_ring.buffer_info[i];
+ WARN_ON(buffer_info->dma != 0);
+
+ context_desc->ipcss = ipcss;
+ context_desc->ipcso = ipcso;
+ context_desc->ipcse = cpu_to_le16(ipcse);
+ context_desc->tucss = tucss;
+ context_desc->tucso = tucso;
+ context_desc->tucse = cpu_to_le16(tucse);
+ context_desc->mss = cpu_to_le16(mss);
+ context_desc->hdr_len = hdr_len;
+ context_desc->status = 0;
+ context_desc->cmd_type_len = cpu_to_le32(
+ IXGB_CONTEXT_DESC_TYPE
+ | IXGB_CONTEXT_DESC_CMD_TSE
+ | IXGB_CONTEXT_DESC_CMD_IP
+ | IXGB_CONTEXT_DESC_CMD_TCP
+ | IXGB_CONTEXT_DESC_CMD_IDE
+ | (skb->len - (hdr_len)));
+
+
+ if (++i == adapter->tx_ring.count) i = 0;
+ adapter->tx_ring.next_to_use = i;
+
+ return 1;
+ }
+
+ return 0;
+}
+
+static bool
+ixgb_tx_csum(struct ixgb_adapter *adapter, struct sk_buff *skb)
+{
+ struct ixgb_context_desc *context_desc;
+ unsigned int i;
+ u8 css, cso;
+
+ if (likely(skb->ip_summed == CHECKSUM_PARTIAL)) {
+ struct ixgb_buffer *buffer_info;
+ css = skb_checksum_start_offset(skb);
+ cso = css + skb->csum_offset;
+
+ i = adapter->tx_ring.next_to_use;
+ context_desc = IXGB_CONTEXT_DESC(adapter->tx_ring, i);
+ buffer_info = &adapter->tx_ring.buffer_info[i];
+ WARN_ON(buffer_info->dma != 0);
+
+ context_desc->tucss = css;
+ context_desc->tucso = cso;
+ context_desc->tucse = 0;
+ /* zero out any previously existing data in one instruction */
+ *(u32 *)&(context_desc->ipcss) = 0;
+ context_desc->status = 0;
+ context_desc->hdr_len = 0;
+ context_desc->mss = 0;
+ context_desc->cmd_type_len =
+ cpu_to_le32(IXGB_CONTEXT_DESC_TYPE
+ | IXGB_TX_DESC_CMD_IDE);
+
+ if (++i == adapter->tx_ring.count) i = 0;
+ adapter->tx_ring.next_to_use = i;
+
+ return true;
+ }
+
+ return false;
+}
+
+#define IXGB_MAX_TXD_PWR 14
+#define IXGB_MAX_DATA_PER_TXD (1<<IXGB_MAX_TXD_PWR)
+
+static int
+ixgb_tx_map(struct ixgb_adapter *adapter, struct sk_buff *skb,
+ unsigned int first)
+{
+ struct ixgb_desc_ring *tx_ring = &adapter->tx_ring;
+ struct pci_dev *pdev = adapter->pdev;
+ struct ixgb_buffer *buffer_info;
+ int len = skb_headlen(skb);
+ unsigned int offset = 0, size, count = 0, i;
+ unsigned int mss = skb_shinfo(skb)->gso_size;
+ unsigned int nr_frags = skb_shinfo(skb)->nr_frags;
+ unsigned int f;
+
+ i = tx_ring->next_to_use;
+
+ while (len) {
+ buffer_info = &tx_ring->buffer_info[i];
+ size = min(len, IXGB_MAX_DATA_PER_TXD);
+ /* Workaround for premature desc write-backs
+ * in TSO mode. Append 4-byte sentinel desc */
+ if (unlikely(mss && !nr_frags && size == len && size > 8))
+ size -= 4;
+
+ buffer_info->length = size;
+ WARN_ON(buffer_info->dma != 0);
+ buffer_info->time_stamp = jiffies;
+ buffer_info->mapped_as_page = false;
+ buffer_info->dma = dma_map_single(&pdev->dev,
+ skb->data + offset,
+ size, DMA_TO_DEVICE);
+ if (dma_mapping_error(&pdev->dev, buffer_info->dma))
+ goto dma_error;
+ buffer_info->next_to_watch = 0;
+
+ len -= size;
+ offset += size;
+ count++;
+ if (len) {
+ i++;
+ if (i == tx_ring->count)
+ i = 0;
+ }
+ }
+
+ for (f = 0; f < nr_frags; f++) {
+ const struct skb_frag_struct *frag;
+
+ frag = &skb_shinfo(skb)->frags[f];
+ len = skb_frag_size(frag);
+ offset = 0;
+
+ while (len) {
+ i++;
+ if (i == tx_ring->count)
+ i = 0;
+
+ buffer_info = &tx_ring->buffer_info[i];
+ size = min(len, IXGB_MAX_DATA_PER_TXD);
+
+ /* Workaround for premature desc write-backs
+ * in TSO mode. Append 4-byte sentinel desc */
+ if (unlikely(mss && (f == (nr_frags - 1))
+ && size == len && size > 8))
+ size -= 4;
+
+ buffer_info->length = size;
+ buffer_info->time_stamp = jiffies;
+ buffer_info->mapped_as_page = true;
+ buffer_info->dma =
+ skb_frag_dma_map(&pdev->dev, frag, offset, size,
+ DMA_TO_DEVICE);
+ if (dma_mapping_error(&pdev->dev, buffer_info->dma))
+ goto dma_error;
+ buffer_info->next_to_watch = 0;
+
+ len -= size;
+ offset += size;
+ count++;
+ }
+ }
+ tx_ring->buffer_info[i].skb = skb;
+ tx_ring->buffer_info[first].next_to_watch = i;
+
+ return count;
+
+dma_error:
+ dev_err(&pdev->dev, "TX DMA map failed\n");
+ buffer_info->dma = 0;
+ if (count)
+ count--;
+
+ while (count--) {
+ if (i==0)
+ i += tx_ring->count;
+ i--;
+ buffer_info = &tx_ring->buffer_info[i];
+ ixgb_unmap_and_free_tx_resource(adapter, buffer_info);
+ }
+
+ return 0;
+}
+
+static void
+ixgb_tx_queue(struct ixgb_adapter *adapter, int count, int vlan_id,int tx_flags)
+{
+ struct ixgb_desc_ring *tx_ring = &adapter->tx_ring;
+ struct ixgb_tx_desc *tx_desc = NULL;
+ struct ixgb_buffer *buffer_info;
+ u32 cmd_type_len = adapter->tx_cmd_type;
+ u8 status = 0;
+ u8 popts = 0;
+ unsigned int i;
+
+ if (tx_flags & IXGB_TX_FLAGS_TSO) {
+ cmd_type_len |= IXGB_TX_DESC_CMD_TSE;
+ popts |= (IXGB_TX_DESC_POPTS_IXSM | IXGB_TX_DESC_POPTS_TXSM);
+ }
+
+ if (tx_flags & IXGB_TX_FLAGS_CSUM)
+ popts |= IXGB_TX_DESC_POPTS_TXSM;
+
+ if (tx_flags & IXGB_TX_FLAGS_VLAN)
+ cmd_type_len |= IXGB_TX_DESC_CMD_VLE;
+
+ i = tx_ring->next_to_use;
+
+ while (count--) {
+ buffer_info = &tx_ring->buffer_info[i];
+ tx_desc = IXGB_TX_DESC(*tx_ring, i);
+ tx_desc->buff_addr = cpu_to_le64(buffer_info->dma);
+ tx_desc->cmd_type_len =
+ cpu_to_le32(cmd_type_len | buffer_info->length);
+ tx_desc->status = status;
+ tx_desc->popts = popts;
+ tx_desc->vlan = cpu_to_le16(vlan_id);
+
+ if (++i == tx_ring->count) i = 0;
+ }
+
+ tx_desc->cmd_type_len |=
+ cpu_to_le32(IXGB_TX_DESC_CMD_EOP | IXGB_TX_DESC_CMD_RS);
+
+ /* Force memory writes to complete before letting h/w
+ * know there are new descriptors to fetch. (Only
+ * applicable for weak-ordered memory model archs,
+ * such as IA-64). */
+ wmb();
+
+ tx_ring->next_to_use = i;
+ IXGB_WRITE_REG(&adapter->hw, TDT, i);
+}
+
+static int __ixgb_maybe_stop_tx(struct net_device *netdev, int size)
+{
+ struct ixgb_adapter *adapter = netdev_priv(netdev);
+ struct ixgb_desc_ring *tx_ring = &adapter->tx_ring;
+
+ netif_stop_queue(netdev);
+ /* Herbert's original patch had:
+ * smp_mb__after_netif_stop_queue();
+ * but since that doesn't exist yet, just open code it. */
+ smp_mb();
+
+ /* We need to check again in a case another CPU has just
+ * made room available. */
+ if (likely(IXGB_DESC_UNUSED(tx_ring) < size))
+ return -EBUSY;
+
+ /* A reprieve! */
+ netif_start_queue(netdev);
+ ++adapter->restart_queue;
+ return 0;
+}
+
+static int ixgb_maybe_stop_tx(struct net_device *netdev,
+ struct ixgb_desc_ring *tx_ring, int size)
+{
+ if (likely(IXGB_DESC_UNUSED(tx_ring) >= size))
+ return 0;
+ return __ixgb_maybe_stop_tx(netdev, size);
+}
+
+
+/* Tx Descriptors needed, worst case */
+#define TXD_USE_COUNT(S) (((S) >> IXGB_MAX_TXD_PWR) + \
+ (((S) & (IXGB_MAX_DATA_PER_TXD - 1)) ? 1 : 0))
+#define DESC_NEEDED TXD_USE_COUNT(IXGB_MAX_DATA_PER_TXD) /* skb->date */ + \
+ MAX_SKB_FRAGS * TXD_USE_COUNT(PAGE_SIZE) + 1 /* for context */ \
+ + 1 /* one more needed for sentinel TSO workaround */
+
+static netdev_tx_t
+ixgb_xmit_frame(struct sk_buff *skb, struct net_device *netdev)
+{
+ struct ixgb_adapter *adapter = netdev_priv(netdev);
+ unsigned int first;
+ unsigned int tx_flags = 0;
+ int vlan_id = 0;
+ int count = 0;
+ int tso;
+
+ if (test_bit(__IXGB_DOWN, &adapter->flags)) {
+ dev_kfree_skb_any(skb);
+ return NETDEV_TX_OK;
+ }
+
+ if (skb->len <= 0) {
+ dev_kfree_skb_any(skb);
+ return NETDEV_TX_OK;
+ }
+
+ if (unlikely(ixgb_maybe_stop_tx(netdev, &adapter->tx_ring,
+ DESC_NEEDED)))
+ return NETDEV_TX_BUSY;
+
+ if (skb_vlan_tag_present(skb)) {
+ tx_flags |= IXGB_TX_FLAGS_VLAN;
+ vlan_id = skb_vlan_tag_get(skb);
+ }
+
+ first = adapter->tx_ring.next_to_use;
+
+ tso = ixgb_tso(adapter, skb);
+ if (tso < 0) {
+ dev_kfree_skb_any(skb);
+ return NETDEV_TX_OK;
+ }
+
+ if (likely(tso))
+ tx_flags |= IXGB_TX_FLAGS_TSO;
+ else if (ixgb_tx_csum(adapter, skb))
+ tx_flags |= IXGB_TX_FLAGS_CSUM;
+
+ count = ixgb_tx_map(adapter, skb, first);
+
+ if (count) {
+ ixgb_tx_queue(adapter, count, vlan_id, tx_flags);
+ /* Make sure there is space in the ring for the next send. */
+ ixgb_maybe_stop_tx(netdev, &adapter->tx_ring, DESC_NEEDED);
+
+ } else {
+ dev_kfree_skb_any(skb);
+ adapter->tx_ring.buffer_info[first].time_stamp = 0;
+ adapter->tx_ring.next_to_use = first;
+ }
+
+ return NETDEV_TX_OK;
+}
+
+/**
+ * ixgb_tx_timeout - Respond to a Tx Hang
+ * @netdev: network interface device structure
+ **/
+
+static void
+ixgb_tx_timeout(struct net_device *netdev)
+{
+ struct ixgb_adapter *adapter = netdev_priv(netdev);
+
+ /* Do the reset outside of interrupt context */
+ schedule_work(&adapter->tx_timeout_task);
+}
+
+static void
+ixgb_tx_timeout_task(struct work_struct *work)
+{
+ struct ixgb_adapter *adapter =
+ container_of(work, struct ixgb_adapter, tx_timeout_task);
+
+ adapter->tx_timeout_count++;
+ ixgb_down(adapter, true);
+ ixgb_up(adapter);
+}
+
+/**
+ * ixgb_get_stats - Get System Network Statistics
+ * @netdev: network interface device structure
+ *
+ * Returns the address of the device statistics structure.
+ * The statistics are actually updated from the timer callback.
+ **/
+
+static struct net_device_stats *
+ixgb_get_stats(struct net_device *netdev)
+{
+ return &netdev->stats;
+}
+
+/**
+ * ixgb_change_mtu - Change the Maximum Transfer Unit
+ * @netdev: network interface device structure
+ * @new_mtu: new value for maximum frame size
+ *
+ * Returns 0 on success, negative on failure
+ **/
+
+static int
+ixgb_change_mtu(struct net_device *netdev, int new_mtu)
+{
+ struct ixgb_adapter *adapter = netdev_priv(netdev);
+ int max_frame = new_mtu + ENET_HEADER_SIZE + ENET_FCS_LENGTH;
+ int old_max_frame = netdev->mtu + ENET_HEADER_SIZE + ENET_FCS_LENGTH;
+
+ /* MTU < 68 is an error for IPv4 traffic, just don't allow it */
+ if ((new_mtu < 68) ||
+ (max_frame > IXGB_MAX_JUMBO_FRAME_SIZE + ENET_FCS_LENGTH)) {
+ netif_err(adapter, probe, adapter->netdev,
+ "Invalid MTU setting %d\n", new_mtu);
+ return -EINVAL;
+ }
+
+ if (old_max_frame == max_frame)
+ return 0;
+
+ if (netif_running(netdev))
+ ixgb_down(adapter, true);
+
+ adapter->rx_buffer_len = max_frame + 8; /* + 8 for errata */
+
+ netdev->mtu = new_mtu;
+
+ if (netif_running(netdev))
+ ixgb_up(adapter);
+
+ return 0;
+}
+
+/**
+ * ixgb_update_stats - Update the board statistics counters.
+ * @adapter: board private structure
+ **/
+
+void
+ixgb_update_stats(struct ixgb_adapter *adapter)
+{
+ struct net_device *netdev = adapter->netdev;
+ struct pci_dev *pdev = adapter->pdev;
+
+ /* Prevent stats update while adapter is being reset */
+ if (pci_channel_offline(pdev))
+ return;
+
+ if ((netdev->flags & IFF_PROMISC) || (netdev->flags & IFF_ALLMULTI) ||
+ (netdev_mc_count(netdev) > IXGB_MAX_NUM_MULTICAST_ADDRESSES)) {
+ u64 multi = IXGB_READ_REG(&adapter->hw, MPRCL);
+ u32 bcast_l = IXGB_READ_REG(&adapter->hw, BPRCL);
+ u32 bcast_h = IXGB_READ_REG(&adapter->hw, BPRCH);
+ u64 bcast = ((u64)bcast_h << 32) | bcast_l;
+
+ multi |= ((u64)IXGB_READ_REG(&adapter->hw, MPRCH) << 32);
+ /* fix up multicast stats by removing broadcasts */
+ if (multi >= bcast)
+ multi -= bcast;
+
+ adapter->stats.mprcl += (multi & 0xFFFFFFFF);
+ adapter->stats.mprch += (multi >> 32);
+ adapter->stats.bprcl += bcast_l;
+ adapter->stats.bprch += bcast_h;
+ } else {
+ adapter->stats.mprcl += IXGB_READ_REG(&adapter->hw, MPRCL);
+ adapter->stats.mprch += IXGB_READ_REG(&adapter->hw, MPRCH);
+ adapter->stats.bprcl += IXGB_READ_REG(&adapter->hw, BPRCL);
+ adapter->stats.bprch += IXGB_READ_REG(&adapter->hw, BPRCH);
+ }
+ adapter->stats.tprl += IXGB_READ_REG(&adapter->hw, TPRL);
+ adapter->stats.tprh += IXGB_READ_REG(&adapter->hw, TPRH);
+ adapter->stats.gprcl += IXGB_READ_REG(&adapter->hw, GPRCL);
+ adapter->stats.gprch += IXGB_READ_REG(&adapter->hw, GPRCH);
+ adapter->stats.uprcl += IXGB_READ_REG(&adapter->hw, UPRCL);
+ adapter->stats.uprch += IXGB_READ_REG(&adapter->hw, UPRCH);
+ adapter->stats.vprcl += IXGB_READ_REG(&adapter->hw, VPRCL);
+ adapter->stats.vprch += IXGB_READ_REG(&adapter->hw, VPRCH);
+ adapter->stats.jprcl += IXGB_READ_REG(&adapter->hw, JPRCL);
+ adapter->stats.jprch += IXGB_READ_REG(&adapter->hw, JPRCH);
+ adapter->stats.gorcl += IXGB_READ_REG(&adapter->hw, GORCL);
+ adapter->stats.gorch += IXGB_READ_REG(&adapter->hw, GORCH);
+ adapter->stats.torl += IXGB_READ_REG(&adapter->hw, TORL);
+ adapter->stats.torh += IXGB_READ_REG(&adapter->hw, TORH);
+ adapter->stats.rnbc += IXGB_READ_REG(&adapter->hw, RNBC);
+ adapter->stats.ruc += IXGB_READ_REG(&adapter->hw, RUC);
+ adapter->stats.roc += IXGB_READ_REG(&adapter->hw, ROC);
+ adapter->stats.rlec += IXGB_READ_REG(&adapter->hw, RLEC);
+ adapter->stats.crcerrs += IXGB_READ_REG(&adapter->hw, CRCERRS);
+ adapter->stats.icbc += IXGB_READ_REG(&adapter->hw, ICBC);
+ adapter->stats.ecbc += IXGB_READ_REG(&adapter->hw, ECBC);
+ adapter->stats.mpc += IXGB_READ_REG(&adapter->hw, MPC);
+ adapter->stats.tptl += IXGB_READ_REG(&adapter->hw, TPTL);
+ adapter->stats.tpth += IXGB_READ_REG(&adapter->hw, TPTH);
+ adapter->stats.gptcl += IXGB_READ_REG(&adapter->hw, GPTCL);
+ adapter->stats.gptch += IXGB_READ_REG(&adapter->hw, GPTCH);
+ adapter->stats.bptcl += IXGB_READ_REG(&adapter->hw, BPTCL);
+ adapter->stats.bptch += IXGB_READ_REG(&adapter->hw, BPTCH);
+ adapter->stats.mptcl += IXGB_READ_REG(&adapter->hw, MPTCL);
+ adapter->stats.mptch += IXGB_READ_REG(&adapter->hw, MPTCH);
+ adapter->stats.uptcl += IXGB_READ_REG(&adapter->hw, UPTCL);
+ adapter->stats.uptch += IXGB_READ_REG(&adapter->hw, UPTCH);
+ adapter->stats.vptcl += IXGB_READ_REG(&adapter->hw, VPTCL);
+ adapter->stats.vptch += IXGB_READ_REG(&adapter->hw, VPTCH);
+ adapter->stats.jptcl += IXGB_READ_REG(&adapter->hw, JPTCL);
+ adapter->stats.jptch += IXGB_READ_REG(&adapter->hw, JPTCH);
+ adapter->stats.gotcl += IXGB_READ_REG(&adapter->hw, GOTCL);
+ adapter->stats.gotch += IXGB_READ_REG(&adapter->hw, GOTCH);
+ adapter->stats.totl += IXGB_READ_REG(&adapter->hw, TOTL);
+ adapter->stats.toth += IXGB_READ_REG(&adapter->hw, TOTH);
+ adapter->stats.dc += IXGB_READ_REG(&adapter->hw, DC);
+ adapter->stats.plt64c += IXGB_READ_REG(&adapter->hw, PLT64C);
+ adapter->stats.tsctc += IXGB_READ_REG(&adapter->hw, TSCTC);
+ adapter->stats.tsctfc += IXGB_READ_REG(&adapter->hw, TSCTFC);
+ adapter->stats.ibic += IXGB_READ_REG(&adapter->hw, IBIC);
+ adapter->stats.rfc += IXGB_READ_REG(&adapter->hw, RFC);
+ adapter->stats.lfc += IXGB_READ_REG(&adapter->hw, LFC);
+ adapter->stats.pfrc += IXGB_READ_REG(&adapter->hw, PFRC);
+ adapter->stats.pftc += IXGB_READ_REG(&adapter->hw, PFTC);
+ adapter->stats.mcfrc += IXGB_READ_REG(&adapter->hw, MCFRC);
+ adapter->stats.mcftc += IXGB_READ_REG(&adapter->hw, MCFTC);
+ adapter->stats.xonrxc += IXGB_READ_REG(&adapter->hw, XONRXC);
+ adapter->stats.xontxc += IXGB_READ_REG(&adapter->hw, XONTXC);
+ adapter->stats.xoffrxc += IXGB_READ_REG(&adapter->hw, XOFFRXC);
+ adapter->stats.xofftxc += IXGB_READ_REG(&adapter->hw, XOFFTXC);
+ adapter->stats.rjc += IXGB_READ_REG(&adapter->hw, RJC);
+
+ /* Fill out the OS statistics structure */
+
+ netdev->stats.rx_packets = adapter->stats.gprcl;
+ netdev->stats.tx_packets = adapter->stats.gptcl;
+ netdev->stats.rx_bytes = adapter->stats.gorcl;
+ netdev->stats.tx_bytes = adapter->stats.gotcl;
+ netdev->stats.multicast = adapter->stats.mprcl;
+ netdev->stats.collisions = 0;
+
+ /* ignore RLEC as it reports errors for padded (<64bytes) frames
+ * with a length in the type/len field */
+ netdev->stats.rx_errors =
+ /* adapter->stats.rnbc + */ adapter->stats.crcerrs +
+ adapter->stats.ruc +
+ adapter->stats.roc /*+ adapter->stats.rlec */ +
+ adapter->stats.icbc +
+ adapter->stats.ecbc + adapter->stats.mpc;
+
+ /* see above
+ * netdev->stats.rx_length_errors = adapter->stats.rlec;
+ */
+
+ netdev->stats.rx_crc_errors = adapter->stats.crcerrs;
+ netdev->stats.rx_fifo_errors = adapter->stats.mpc;
+ netdev->stats.rx_missed_errors = adapter->stats.mpc;
+ netdev->stats.rx_over_errors = adapter->stats.mpc;
+
+ netdev->stats.tx_errors = 0;
+ netdev->stats.rx_frame_errors = 0;
+ netdev->stats.tx_aborted_errors = 0;
+ netdev->stats.tx_carrier_errors = 0;
+ netdev->stats.tx_fifo_errors = 0;
+ netdev->stats.tx_heartbeat_errors = 0;
+ netdev->stats.tx_window_errors = 0;
+}
+
+#define IXGB_MAX_INTR 10
+/**
+ * ixgb_intr - Interrupt Handler
+ * @irq: interrupt number
+ * @data: pointer to a network interface device structure
+ **/
+
+static irqreturn_t
+ixgb_intr(int irq, void *data)
+{
+ struct net_device *netdev = data;
+ struct ixgb_adapter *adapter = netdev_priv(netdev);
+ struct ixgb_hw *hw = &adapter->hw;
+ u32 icr = IXGB_READ_REG(hw, ICR);
+
+ if (unlikely(!icr))
+ return IRQ_NONE; /* Not our interrupt */
+
+ if (unlikely(icr & (IXGB_INT_RXSEQ | IXGB_INT_LSC)))
+ if (!test_bit(__IXGB_DOWN, &adapter->flags))
+ mod_timer(&adapter->watchdog_timer, jiffies);
+
+ if (napi_schedule_prep(&adapter->napi)) {
+
+ /* Disable interrupts and register for poll. The flush
+ of the posted write is intentionally left out.
+ */
+
+ IXGB_WRITE_REG(&adapter->hw, IMC, ~0);
+ __napi_schedule(&adapter->napi);
+ }
+ return IRQ_HANDLED;
+}
+
+/**
+ * ixgb_clean - NAPI Rx polling callback
+ * @adapter: board private structure
+ **/
+
+static int
+ixgb_clean(struct napi_struct *napi, int budget)
+{
+ struct ixgb_adapter *adapter = container_of(napi, struct ixgb_adapter, napi);
+ int work_done = 0;
+
+ ixgb_clean_tx_irq(adapter);
+ ixgb_clean_rx_irq(adapter, &work_done, budget);
+
+ /* If budget not fully consumed, exit the polling mode */
+ if (work_done < budget) {
+ napi_complete(napi);
+ if (!test_bit(__IXGB_DOWN, &adapter->flags))
+ ixgb_irq_enable(adapter);
+ }
+
+ return work_done;
+}
+
+/**
+ * ixgb_clean_tx_irq - Reclaim resources after transmit completes
+ * @adapter: board private structure
+ **/
+
+static bool
+ixgb_clean_tx_irq(struct ixgb_adapter *adapter)
+{
+ struct ixgb_desc_ring *tx_ring = &adapter->tx_ring;
+ struct net_device *netdev = adapter->netdev;
+ struct ixgb_tx_desc *tx_desc, *eop_desc;
+ struct ixgb_buffer *buffer_info;
+ unsigned int i, eop;
+ bool cleaned = false;
+
+ i = tx_ring->next_to_clean;
+ eop = tx_ring->buffer_info[i].next_to_watch;
+ eop_desc = IXGB_TX_DESC(*tx_ring, eop);
+
+ while (eop_desc->status & IXGB_TX_DESC_STATUS_DD) {
+
+ rmb(); /* read buffer_info after eop_desc */
+ for (cleaned = false; !cleaned; ) {
+ tx_desc = IXGB_TX_DESC(*tx_ring, i);
+ buffer_info = &tx_ring->buffer_info[i];
+
+ if (tx_desc->popts &
+ (IXGB_TX_DESC_POPTS_TXSM |
+ IXGB_TX_DESC_POPTS_IXSM))
+ adapter->hw_csum_tx_good++;
+
+ ixgb_unmap_and_free_tx_resource(adapter, buffer_info);
+
+ *(u32 *)&(tx_desc->status) = 0;
+
+ cleaned = (i == eop);
+ if (++i == tx_ring->count) i = 0;
+ }
+
+ eop = tx_ring->buffer_info[i].next_to_watch;
+ eop_desc = IXGB_TX_DESC(*tx_ring, eop);
+ }
+
+ tx_ring->next_to_clean = i;
+
+ if (unlikely(cleaned && netif_carrier_ok(netdev) &&
+ IXGB_DESC_UNUSED(tx_ring) >= DESC_NEEDED)) {
+ /* Make sure that anybody stopping the queue after this
+ * sees the new next_to_clean. */
+ smp_mb();
+
+ if (netif_queue_stopped(netdev) &&
+ !(test_bit(__IXGB_DOWN, &adapter->flags))) {
+ netif_wake_queue(netdev);
+ ++adapter->restart_queue;
+ }
+ }
+
+ if (adapter->detect_tx_hung) {
+ /* detect a transmit hang in hardware, this serializes the
+ * check with the clearing of time_stamp and movement of i */
+ adapter->detect_tx_hung = false;
+ if (tx_ring->buffer_info[eop].time_stamp &&
+ time_after(jiffies, tx_ring->buffer_info[eop].time_stamp + HZ)
+ && !(IXGB_READ_REG(&adapter->hw, STATUS) &
+ IXGB_STATUS_TXOFF)) {
+ /* detected Tx unit hang */
+ netif_err(adapter, drv, adapter->netdev,
+ "Detected Tx Unit Hang\n"
+ " TDH <%x>\n"
+ " TDT <%x>\n"
+ " next_to_use <%x>\n"
+ " next_to_clean <%x>\n"
+ "buffer_info[next_to_clean]\n"
+ " time_stamp <%lx>\n"
+ " next_to_watch <%x>\n"
+ " jiffies <%lx>\n"
+ " next_to_watch.status <%x>\n",
+ IXGB_READ_REG(&adapter->hw, TDH),
+ IXGB_READ_REG(&adapter->hw, TDT),
+ tx_ring->next_to_use,
+ tx_ring->next_to_clean,
+ tx_ring->buffer_info[eop].time_stamp,
+ eop,
+ jiffies,
+ eop_desc->status);
+ netif_stop_queue(netdev);
+ }
+ }
+
+ return cleaned;
+}
+
+/**
+ * ixgb_rx_checksum - Receive Checksum Offload for 82597.
+ * @adapter: board private structure
+ * @rx_desc: receive descriptor
+ * @sk_buff: socket buffer with received data
+ **/
+
+static void
+ixgb_rx_checksum(struct ixgb_adapter *adapter,
+ struct ixgb_rx_desc *rx_desc,
+ struct sk_buff *skb)
+{
+ /* Ignore Checksum bit is set OR
+ * TCP Checksum has not been calculated
+ */
+ if ((rx_desc->status & IXGB_RX_DESC_STATUS_IXSM) ||
+ (!(rx_desc->status & IXGB_RX_DESC_STATUS_TCPCS))) {
+ skb_checksum_none_assert(skb);
+ return;
+ }
+
+ /* At this point we know the hardware did the TCP checksum */
+ /* now look at the TCP checksum error bit */
+ if (rx_desc->errors & IXGB_RX_DESC_ERRORS_TCPE) {
+ /* let the stack verify checksum errors */
+ skb_checksum_none_assert(skb);
+ adapter->hw_csum_rx_error++;
+ } else {
+ /* TCP checksum is good */
+ skb->ip_summed = CHECKSUM_UNNECESSARY;
+ adapter->hw_csum_rx_good++;
+ }
+}
+
+/*
+ * this should improve performance for small packets with large amounts
+ * of reassembly being done in the stack
+ */
+static void ixgb_check_copybreak(struct napi_struct *napi,
+ struct ixgb_buffer *buffer_info,
+ u32 length, struct sk_buff **skb)
+{
+ struct sk_buff *new_skb;
+
+ if (length > copybreak)
+ return;
+
+ new_skb = napi_alloc_skb(napi, length);
+ if (!new_skb)
+ return;
+
+ skb_copy_to_linear_data_offset(new_skb, -NET_IP_ALIGN,
+ (*skb)->data - NET_IP_ALIGN,
+ length + NET_IP_ALIGN);
+ /* save the skb in buffer_info as good */
+ buffer_info->skb = *skb;
+ *skb = new_skb;
+}
+
+/**
+ * ixgb_clean_rx_irq - Send received data up the network stack,
+ * @adapter: board private structure
+ **/
+
+static bool
+ixgb_clean_rx_irq(struct ixgb_adapter *adapter, int *work_done, int work_to_do)
+{
+ struct ixgb_desc_ring *rx_ring = &adapter->rx_ring;
+ struct net_device *netdev = adapter->netdev;
+ struct pci_dev *pdev = adapter->pdev;
+ struct ixgb_rx_desc *rx_desc, *next_rxd;
+ struct ixgb_buffer *buffer_info, *next_buffer, *next2_buffer;
+ u32 length;
+ unsigned int i, j;
+ int cleaned_count = 0;
+ bool cleaned = false;
+
+ i = rx_ring->next_to_clean;
+ rx_desc = IXGB_RX_DESC(*rx_ring, i);
+ buffer_info = &rx_ring->buffer_info[i];
+
+ while (rx_desc->status & IXGB_RX_DESC_STATUS_DD) {
+ struct sk_buff *skb;
+ u8 status;
+
+ if (*work_done >= work_to_do)
+ break;
+
+ (*work_done)++;
+ rmb(); /* read descriptor and rx_buffer_info after status DD */
+ status = rx_desc->status;
+ skb = buffer_info->skb;
+ buffer_info->skb = NULL;
+
+ prefetch(skb->data - NET_IP_ALIGN);
+
+ if (++i == rx_ring->count)
+ i = 0;
+ next_rxd = IXGB_RX_DESC(*rx_ring, i);
+ prefetch(next_rxd);
+
+ j = i + 1;
+ if (j == rx_ring->count)
+ j = 0;
+ next2_buffer = &rx_ring->buffer_info[j];
+ prefetch(next2_buffer);
+
+ next_buffer = &rx_ring->buffer_info[i];
+
+ cleaned = true;
+ cleaned_count++;
+
+ dma_unmap_single(&pdev->dev,
+ buffer_info->dma,
+ buffer_info->length,
+ DMA_FROM_DEVICE);
+ buffer_info->dma = 0;
+
+ length = le16_to_cpu(rx_desc->length);
+ rx_desc->length = 0;
+
+ if (unlikely(!(status & IXGB_RX_DESC_STATUS_EOP))) {
+
+ /* All receives must fit into a single buffer */
+
+ pr_debug("Receive packet consumed multiple buffers length<%x>\n",
+ length);
+
+ dev_kfree_skb_irq(skb);
+ goto rxdesc_done;
+ }
+
+ if (unlikely(rx_desc->errors &
+ (IXGB_RX_DESC_ERRORS_CE | IXGB_RX_DESC_ERRORS_SE |
+ IXGB_RX_DESC_ERRORS_P | IXGB_RX_DESC_ERRORS_RXE))) {
+ dev_kfree_skb_irq(skb);
+ goto rxdesc_done;
+ }
+
+ ixgb_check_copybreak(&adapter->napi, buffer_info, length, &skb);
+
+ /* Good Receive */
+ skb_put(skb, length);
+
+ /* Receive Checksum Offload */
+ ixgb_rx_checksum(adapter, rx_desc, skb);
+
+ skb->protocol = eth_type_trans(skb, netdev);
+ if (status & IXGB_RX_DESC_STATUS_VP)
+ __vlan_hwaccel_put_tag(skb, htons(ETH_P_8021Q),
+ le16_to_cpu(rx_desc->special));
+
+ netif_receive_skb(skb);
+
+rxdesc_done:
+ /* clean up descriptor, might be written over by hw */
+ rx_desc->status = 0;
+
+ /* return some buffers to hardware, one at a time is too slow */
+ if (unlikely(cleaned_count >= IXGB_RX_BUFFER_WRITE)) {
+ ixgb_alloc_rx_buffers(adapter, cleaned_count);
+ cleaned_count = 0;
+ }
+
+ /* use prefetched values */
+ rx_desc = next_rxd;
+ buffer_info = next_buffer;
+ }
+
+ rx_ring->next_to_clean = i;
+
+ cleaned_count = IXGB_DESC_UNUSED(rx_ring);
+ if (cleaned_count)
+ ixgb_alloc_rx_buffers(adapter, cleaned_count);
+
+ return cleaned;
+}
+
+/**
+ * ixgb_alloc_rx_buffers - Replace used receive buffers
+ * @adapter: address of board private structure
+ **/
+
+static void
+ixgb_alloc_rx_buffers(struct ixgb_adapter *adapter, int cleaned_count)
+{
+ struct ixgb_desc_ring *rx_ring = &adapter->rx_ring;
+ struct net_device *netdev = adapter->netdev;
+ struct pci_dev *pdev = adapter->pdev;
+ struct ixgb_rx_desc *rx_desc;
+ struct ixgb_buffer *buffer_info;
+ struct sk_buff *skb;
+ unsigned int i;
+ long cleancount;
+
+ i = rx_ring->next_to_use;
+ buffer_info = &rx_ring->buffer_info[i];
+ cleancount = IXGB_DESC_UNUSED(rx_ring);
+
+
+ /* leave three descriptors unused */
+ while (--cleancount > 2 && cleaned_count--) {
+ /* recycle! its good for you */
+ skb = buffer_info->skb;
+ if (skb) {
+ skb_trim(skb, 0);
+ goto map_skb;
+ }
+
+ skb = netdev_alloc_skb_ip_align(netdev, adapter->rx_buffer_len);
+ if (unlikely(!skb)) {
+ /* Better luck next round */
+ adapter->alloc_rx_buff_failed++;
+ break;
+ }
+
+ buffer_info->skb = skb;
+ buffer_info->length = adapter->rx_buffer_len;
+map_skb:
+ buffer_info->dma = dma_map_single(&pdev->dev,
+ skb->data,
+ adapter->rx_buffer_len,
+ DMA_FROM_DEVICE);
+ if (dma_mapping_error(&pdev->dev, buffer_info->dma)) {
+ adapter->alloc_rx_buff_failed++;
+ break;
+ }
+
+ rx_desc = IXGB_RX_DESC(*rx_ring, i);
+ rx_desc->buff_addr = cpu_to_le64(buffer_info->dma);
+ /* guarantee DD bit not set now before h/w gets descriptor
+ * this is the rest of the workaround for h/w double
+ * writeback. */
+ rx_desc->status = 0;
+
+
+ if (++i == rx_ring->count)
+ i = 0;
+ buffer_info = &rx_ring->buffer_info[i];
+ }
+
+ if (likely(rx_ring->next_to_use != i)) {
+ rx_ring->next_to_use = i;
+ if (unlikely(i-- == 0))
+ i = (rx_ring->count - 1);
+
+ /* Force memory writes to complete before letting h/w
+ * know there are new descriptors to fetch. (Only
+ * applicable for weak-ordered memory model archs, such
+ * as IA-64). */
+ wmb();
+ IXGB_WRITE_REG(&adapter->hw, RDT, i);
+ }
+}
+
+static void
+ixgb_vlan_strip_enable(struct ixgb_adapter *adapter)
+{
+ u32 ctrl;
+
+ /* enable VLAN tag insert/strip */
+ ctrl = IXGB_READ_REG(&adapter->hw, CTRL0);
+ ctrl |= IXGB_CTRL0_VME;
+ IXGB_WRITE_REG(&adapter->hw, CTRL0, ctrl);
+}
+
+static void
+ixgb_vlan_strip_disable(struct ixgb_adapter *adapter)
+{
+ u32 ctrl;
+
+ /* disable VLAN tag insert/strip */
+ ctrl = IXGB_READ_REG(&adapter->hw, CTRL0);
+ ctrl &= ~IXGB_CTRL0_VME;
+ IXGB_WRITE_REG(&adapter->hw, CTRL0, ctrl);
+}
+
+static int
+ixgb_vlan_rx_add_vid(struct net_device *netdev, __be16 proto, u16 vid)
+{
+ struct ixgb_adapter *adapter = netdev_priv(netdev);
+ u32 vfta, index;
+
+ /* add VID to filter table */
+
+ index = (vid >> 5) & 0x7F;
+ vfta = IXGB_READ_REG_ARRAY(&adapter->hw, VFTA, index);
+ vfta |= (1 << (vid & 0x1F));
+ ixgb_write_vfta(&adapter->hw, index, vfta);
+ set_bit(vid, adapter->active_vlans);
+
+ return 0;
+}
+
+static int
+ixgb_vlan_rx_kill_vid(struct net_device *netdev, __be16 proto, u16 vid)
+{
+ struct ixgb_adapter *adapter = netdev_priv(netdev);
+ u32 vfta, index;
+
+ /* remove VID from filter table */
+
+ index = (vid >> 5) & 0x7F;
+ vfta = IXGB_READ_REG_ARRAY(&adapter->hw, VFTA, index);
+ vfta &= ~(1 << (vid & 0x1F));
+ ixgb_write_vfta(&adapter->hw, index, vfta);
+ clear_bit(vid, adapter->active_vlans);
+
+ return 0;
+}
+
+static void
+ixgb_restore_vlan(struct ixgb_adapter *adapter)
+{
+ u16 vid;
+
+ for_each_set_bit(vid, adapter->active_vlans, VLAN_N_VID)
+ ixgb_vlan_rx_add_vid(adapter->netdev, htons(ETH_P_8021Q), vid);
+}
+
+#ifdef CONFIG_NET_POLL_CONTROLLER
+/*
+ * Polling 'interrupt' - used by things like netconsole to send skbs
+ * without having to re-enable interrupts. It's not called while
+ * the interrupt routine is executing.
+ */
+
+static void ixgb_netpoll(struct net_device *dev)
+{
+ struct ixgb_adapter *adapter = netdev_priv(dev);
+
+ disable_irq(adapter->pdev->irq);
+ ixgb_intr(adapter->pdev->irq, dev);
+ enable_irq(adapter->pdev->irq);
+}
+#endif
+
+/**
+ * ixgb_io_error_detected - called when PCI error is detected
+ * @pdev: pointer to pci device with error
+ * @state: pci channel state after error
+ *
+ * This callback is called by the PCI subsystem whenever
+ * a PCI bus error is detected.
+ */
+static pci_ers_result_t ixgb_io_error_detected(struct pci_dev *pdev,
+ enum pci_channel_state state)
+{
+ struct net_device *netdev = pci_get_drvdata(pdev);
+ struct ixgb_adapter *adapter = netdev_priv(netdev);
+
+ netif_device_detach(netdev);
+
+ if (state == pci_channel_io_perm_failure)
+ return PCI_ERS_RESULT_DISCONNECT;
+
+ if (netif_running(netdev))
+ ixgb_down(adapter, true);
+
+ pci_disable_device(pdev);
+
+ /* Request a slot reset. */
+ return PCI_ERS_RESULT_NEED_RESET;
+}
+
+/**
+ * ixgb_io_slot_reset - called after the pci bus has been reset.
+ * @pdev pointer to pci device with error
+ *
+ * This callback is called after the PCI bus has been reset.
+ * Basically, this tries to restart the card from scratch.
+ * This is a shortened version of the device probe/discovery code,
+ * it resembles the first-half of the ixgb_probe() routine.
+ */
+static pci_ers_result_t ixgb_io_slot_reset(struct pci_dev *pdev)
+{
+ struct net_device *netdev = pci_get_drvdata(pdev);
+ struct ixgb_adapter *adapter = netdev_priv(netdev);
+
+ if (pci_enable_device(pdev)) {
+ netif_err(adapter, probe, adapter->netdev,
+ "Cannot re-enable PCI device after reset\n");
+ return PCI_ERS_RESULT_DISCONNECT;
+ }
+
+ /* Perform card reset only on one instance of the card */
+ if (0 != PCI_FUNC (pdev->devfn))
+ return PCI_ERS_RESULT_RECOVERED;
+
+ pci_set_master(pdev);
+
+ netif_carrier_off(netdev);
+ netif_stop_queue(netdev);
+ ixgb_reset(adapter);
+
+ /* Make sure the EEPROM is good */
+ if (!ixgb_validate_eeprom_checksum(&adapter->hw)) {
+ netif_err(adapter, probe, adapter->netdev,
+ "After reset, the EEPROM checksum is not valid\n");
+ return PCI_ERS_RESULT_DISCONNECT;
+ }
+ ixgb_get_ee_mac_addr(&adapter->hw, netdev->dev_addr);
+ memcpy(netdev->perm_addr, netdev->dev_addr, netdev->addr_len);
+
+ if (!is_valid_ether_addr(netdev->perm_addr)) {
+ netif_err(adapter, probe, adapter->netdev,
+ "After reset, invalid MAC address\n");
+ return PCI_ERS_RESULT_DISCONNECT;
+ }
+
+ return PCI_ERS_RESULT_RECOVERED;
+}
+
+/**
+ * ixgb_io_resume - called when its OK to resume normal operations
+ * @pdev pointer to pci device with error
+ *
+ * The error recovery driver tells us that its OK to resume
+ * normal operation. Implementation resembles the second-half
+ * of the ixgb_probe() routine.
+ */
+static void ixgb_io_resume(struct pci_dev *pdev)
+{
+ struct net_device *netdev = pci_get_drvdata(pdev);
+ struct ixgb_adapter *adapter = netdev_priv(netdev);
+
+ pci_set_master(pdev);
+
+ if (netif_running(netdev)) {
+ if (ixgb_up(adapter)) {
+ pr_err("can't bring device back up after reset\n");
+ return;
+ }
+ }
+
+ netif_device_attach(netdev);
+ mod_timer(&adapter->watchdog_timer, jiffies);
+}
+
+/* ixgb_main.c */
diff --git a/kernel/drivers/net/ethernet/intel/ixgb/ixgb_osdep.h b/kernel/drivers/net/ethernet/intel/ixgb/ixgb_osdep.h
new file mode 100644
index 000000000..8fc905192
--- /dev/null
+++ b/kernel/drivers/net/ethernet/intel/ixgb/ixgb_osdep.h
@@ -0,0 +1,64 @@
+/*******************************************************************************
+
+ Intel PRO/10GbE Linux driver
+ Copyright(c) 1999 - 2008 Intel Corporation.
+
+ This program is free software; you can redistribute it and/or modify it
+ under the terms and conditions of the GNU General Public License,
+ version 2, as published by the Free Software Foundation.
+
+ This program is distributed in the hope it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ more details.
+
+ You should have received a copy of the GNU General Public License along with
+ this program; if not, write to the Free Software Foundation, Inc.,
+ 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+ The full GNU General Public License is included in this distribution in
+ the file called "COPYING".
+
+ Contact Information:
+ Linux NICS <linux.nics@intel.com>
+ e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+*******************************************************************************/
+
+/* glue for the OS independent part of ixgb
+ * includes register access macros
+ */
+
+#ifndef _IXGB_OSDEP_H_
+#define _IXGB_OSDEP_H_
+
+#include <linux/types.h>
+#include <linux/delay.h>
+#include <asm/io.h>
+#include <linux/interrupt.h>
+#include <linux/sched.h>
+#include <linux/if_ether.h>
+
+#undef ASSERT
+#define ASSERT(x) BUG_ON(!(x))
+
+#define ENTER() pr_debug("%s\n", __func__);
+
+#define IXGB_WRITE_REG(a, reg, value) ( \
+ writel((value), ((a)->hw_addr + IXGB_##reg)))
+
+#define IXGB_READ_REG(a, reg) ( \
+ readl((a)->hw_addr + IXGB_##reg))
+
+#define IXGB_WRITE_REG_ARRAY(a, reg, offset, value) ( \
+ writel((value), ((a)->hw_addr + IXGB_##reg + ((offset) << 2))))
+
+#define IXGB_READ_REG_ARRAY(a, reg, offset) ( \
+ readl((a)->hw_addr + IXGB_##reg + ((offset) << 2)))
+
+#define IXGB_WRITE_FLUSH(a) IXGB_READ_REG(a, STATUS)
+
+#define IXGB_MEMCPY memcpy
+
+#endif /* _IXGB_OSDEP_H_ */
diff --git a/kernel/drivers/net/ethernet/intel/ixgb/ixgb_param.c b/kernel/drivers/net/ethernet/intel/ixgb/ixgb_param.c
new file mode 100644
index 000000000..04a60640d
--- /dev/null
+++ b/kernel/drivers/net/ethernet/intel/ixgb/ixgb_param.c
@@ -0,0 +1,469 @@
+/*******************************************************************************
+
+ Intel PRO/10GbE Linux driver
+ Copyright(c) 1999 - 2008 Intel Corporation.
+
+ This program is free software; you can redistribute it and/or modify it
+ under the terms and conditions of the GNU General Public License,
+ version 2, as published by the Free Software Foundation.
+
+ This program is distributed in the hope it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ more details.
+
+ You should have received a copy of the GNU General Public License along with
+ this program; if not, write to the Free Software Foundation, Inc.,
+ 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+ The full GNU General Public License is included in this distribution in
+ the file called "COPYING".
+
+ Contact Information:
+ Linux NICS <linux.nics@intel.com>
+ e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+*******************************************************************************/
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include "ixgb.h"
+
+/* This is the only thing that needs to be changed to adjust the
+ * maximum number of ports that the driver can manage.
+ */
+
+#define IXGB_MAX_NIC 8
+
+#define OPTION_UNSET -1
+#define OPTION_DISABLED 0
+#define OPTION_ENABLED 1
+
+/* All parameters are treated the same, as an integer array of values.
+ * This macro just reduces the need to repeat the same declaration code
+ * over and over (plus this helps to avoid typo bugs).
+ */
+
+#define IXGB_PARAM_INIT { [0 ... IXGB_MAX_NIC] = OPTION_UNSET }
+#define IXGB_PARAM(X, desc) \
+ static int X[IXGB_MAX_NIC+1] \
+ = IXGB_PARAM_INIT; \
+ static unsigned int num_##X = 0; \
+ module_param_array_named(X, X, int, &num_##X, 0); \
+ MODULE_PARM_DESC(X, desc);
+
+/* Transmit Descriptor Count
+ *
+ * Valid Range: 64-4096
+ *
+ * Default Value: 256
+ */
+
+IXGB_PARAM(TxDescriptors, "Number of transmit descriptors");
+
+/* Receive Descriptor Count
+ *
+ * Valid Range: 64-4096
+ *
+ * Default Value: 1024
+ */
+
+IXGB_PARAM(RxDescriptors, "Number of receive descriptors");
+
+/* User Specified Flow Control Override
+ *
+ * Valid Range: 0-3
+ * - 0 - No Flow Control
+ * - 1 - Rx only, respond to PAUSE frames but do not generate them
+ * - 2 - Tx only, generate PAUSE frames but ignore them on receive
+ * - 3 - Full Flow Control Support
+ *
+ * Default Value: 2 - Tx only (silicon bug avoidance)
+ */
+
+IXGB_PARAM(FlowControl, "Flow Control setting");
+
+/* XsumRX - Receive Checksum Offload Enable/Disable
+ *
+ * Valid Range: 0, 1
+ * - 0 - disables all checksum offload
+ * - 1 - enables receive IP/TCP/UDP checksum offload
+ * on 82597 based NICs
+ *
+ * Default Value: 1
+ */
+
+IXGB_PARAM(XsumRX, "Disable or enable Receive Checksum offload");
+
+/* Transmit Interrupt Delay in units of 0.8192 microseconds
+ *
+ * Valid Range: 0-65535
+ *
+ * Default Value: 32
+ */
+
+IXGB_PARAM(TxIntDelay, "Transmit Interrupt Delay");
+
+/* Receive Interrupt Delay in units of 0.8192 microseconds
+ *
+ * Valid Range: 0-65535
+ *
+ * Default Value: 72
+ */
+
+IXGB_PARAM(RxIntDelay, "Receive Interrupt Delay");
+
+/* Receive Flow control high threshold (when we send a pause frame)
+ * (FCRTH)
+ *
+ * Valid Range: 1,536 - 262,136 (0x600 - 0x3FFF8, 8 byte granularity)
+ *
+ * Default Value: 196,608 (0x30000)
+ */
+
+IXGB_PARAM(RxFCHighThresh, "Receive Flow Control High Threshold");
+
+/* Receive Flow control low threshold (when we send a resume frame)
+ * (FCRTL)
+ *
+ * Valid Range: 64 - 262,136 (0x40 - 0x3FFF8, 8 byte granularity)
+ * must be less than high threshold by at least 8 bytes
+ *
+ * Default Value: 163,840 (0x28000)
+ */
+
+IXGB_PARAM(RxFCLowThresh, "Receive Flow Control Low Threshold");
+
+/* Flow control request timeout (how long to pause the link partner's tx)
+ * (PAP 15:0)
+ *
+ * Valid Range: 1 - 65535
+ *
+ * Default Value: 65535 (0xffff) (we'll send an xon if we recover)
+ */
+
+IXGB_PARAM(FCReqTimeout, "Flow Control Request Timeout");
+
+/* Interrupt Delay Enable
+ *
+ * Valid Range: 0, 1
+ *
+ * - 0 - disables transmit interrupt delay
+ * - 1 - enables transmmit interrupt delay
+ *
+ * Default Value: 1
+ */
+
+IXGB_PARAM(IntDelayEnable, "Transmit Interrupt Delay Enable");
+
+
+#define DEFAULT_TIDV 32
+#define MAX_TIDV 0xFFFF
+#define MIN_TIDV 0
+
+#define DEFAULT_RDTR 72
+#define MAX_RDTR 0xFFFF
+#define MIN_RDTR 0
+
+#define XSUMRX_DEFAULT OPTION_ENABLED
+
+#define DEFAULT_FCRTL 0x28000
+#define DEFAULT_FCRTH 0x30000
+#define MIN_FCRTL 0
+#define MAX_FCRTL 0x3FFE8
+#define MIN_FCRTH 8
+#define MAX_FCRTH 0x3FFF0
+
+#define MIN_FCPAUSE 1
+#define MAX_FCPAUSE 0xffff
+#define DEFAULT_FCPAUSE 0xFFFF /* this may be too long */
+
+struct ixgb_option {
+ enum { enable_option, range_option, list_option } type;
+ const char *name;
+ const char *err;
+ int def;
+ union {
+ struct { /* range_option info */
+ int min;
+ int max;
+ } r;
+ struct { /* list_option info */
+ int nr;
+ const struct ixgb_opt_list {
+ int i;
+ const char *str;
+ } *p;
+ } l;
+ } arg;
+};
+
+static int
+ixgb_validate_option(unsigned int *value, const struct ixgb_option *opt)
+{
+ if (*value == OPTION_UNSET) {
+ *value = opt->def;
+ return 0;
+ }
+
+ switch (opt->type) {
+ case enable_option:
+ switch (*value) {
+ case OPTION_ENABLED:
+ pr_info("%s Enabled\n", opt->name);
+ return 0;
+ case OPTION_DISABLED:
+ pr_info("%s Disabled\n", opt->name);
+ return 0;
+ }
+ break;
+ case range_option:
+ if (*value >= opt->arg.r.min && *value <= opt->arg.r.max) {
+ pr_info("%s set to %i\n", opt->name, *value);
+ return 0;
+ }
+ break;
+ case list_option: {
+ int i;
+ const struct ixgb_opt_list *ent;
+
+ for (i = 0; i < opt->arg.l.nr; i++) {
+ ent = &opt->arg.l.p[i];
+ if (*value == ent->i) {
+ if (ent->str[0] != '\0')
+ pr_info("%s\n", ent->str);
+ return 0;
+ }
+ }
+ }
+ break;
+ default:
+ BUG();
+ }
+
+ pr_info("Invalid %s specified (%i) %s\n", opt->name, *value, opt->err);
+ *value = opt->def;
+ return -1;
+}
+
+/**
+ * ixgb_check_options - Range Checking for Command Line Parameters
+ * @adapter: board private structure
+ *
+ * This routine checks all command line parameters for valid user
+ * input. If an invalid value is given, or if no user specified
+ * value exists, a default value is used. The final value is stored
+ * in a variable in the adapter structure.
+ **/
+
+void
+ixgb_check_options(struct ixgb_adapter *adapter)
+{
+ int bd = adapter->bd_number;
+ if (bd >= IXGB_MAX_NIC) {
+ pr_notice("Warning: no configuration for board #%i\n", bd);
+ pr_notice("Using defaults for all values\n");
+ }
+
+ { /* Transmit Descriptor Count */
+ static const struct ixgb_option opt = {
+ .type = range_option,
+ .name = "Transmit Descriptors",
+ .err = "using default of " __MODULE_STRING(DEFAULT_TXD),
+ .def = DEFAULT_TXD,
+ .arg = { .r = { .min = MIN_TXD,
+ .max = MAX_TXD}}
+ };
+ struct ixgb_desc_ring *tx_ring = &adapter->tx_ring;
+
+ if (num_TxDescriptors > bd) {
+ tx_ring->count = TxDescriptors[bd];
+ ixgb_validate_option(&tx_ring->count, &opt);
+ } else {
+ tx_ring->count = opt.def;
+ }
+ tx_ring->count = ALIGN(tx_ring->count, IXGB_REQ_TX_DESCRIPTOR_MULTIPLE);
+ }
+ { /* Receive Descriptor Count */
+ static const struct ixgb_option opt = {
+ .type = range_option,
+ .name = "Receive Descriptors",
+ .err = "using default of " __MODULE_STRING(DEFAULT_RXD),
+ .def = DEFAULT_RXD,
+ .arg = { .r = { .min = MIN_RXD,
+ .max = MAX_RXD}}
+ };
+ struct ixgb_desc_ring *rx_ring = &adapter->rx_ring;
+
+ if (num_RxDescriptors > bd) {
+ rx_ring->count = RxDescriptors[bd];
+ ixgb_validate_option(&rx_ring->count, &opt);
+ } else {
+ rx_ring->count = opt.def;
+ }
+ rx_ring->count = ALIGN(rx_ring->count, IXGB_REQ_RX_DESCRIPTOR_MULTIPLE);
+ }
+ { /* Receive Checksum Offload Enable */
+ static const struct ixgb_option opt = {
+ .type = enable_option,
+ .name = "Receive Checksum Offload",
+ .err = "defaulting to Enabled",
+ .def = OPTION_ENABLED
+ };
+
+ if (num_XsumRX > bd) {
+ unsigned int rx_csum = XsumRX[bd];
+ ixgb_validate_option(&rx_csum, &opt);
+ adapter->rx_csum = rx_csum;
+ } else {
+ adapter->rx_csum = opt.def;
+ }
+ }
+ { /* Flow Control */
+
+ static const struct ixgb_opt_list fc_list[] = {
+ { ixgb_fc_none, "Flow Control Disabled" },
+ { ixgb_fc_rx_pause, "Flow Control Receive Only" },
+ { ixgb_fc_tx_pause, "Flow Control Transmit Only" },
+ { ixgb_fc_full, "Flow Control Enabled" },
+ { ixgb_fc_default, "Flow Control Hardware Default" }
+ };
+
+ static const struct ixgb_option opt = {
+ .type = list_option,
+ .name = "Flow Control",
+ .err = "reading default settings from EEPROM",
+ .def = ixgb_fc_tx_pause,
+ .arg = { .l = { .nr = ARRAY_SIZE(fc_list),
+ .p = fc_list }}
+ };
+
+ if (num_FlowControl > bd) {
+ unsigned int fc = FlowControl[bd];
+ ixgb_validate_option(&fc, &opt);
+ adapter->hw.fc.type = fc;
+ } else {
+ adapter->hw.fc.type = opt.def;
+ }
+ }
+ { /* Receive Flow Control High Threshold */
+ static const struct ixgb_option opt = {
+ .type = range_option,
+ .name = "Rx Flow Control High Threshold",
+ .err = "using default of " __MODULE_STRING(DEFAULT_FCRTH),
+ .def = DEFAULT_FCRTH,
+ .arg = { .r = { .min = MIN_FCRTH,
+ .max = MAX_FCRTH}}
+ };
+
+ if (num_RxFCHighThresh > bd) {
+ adapter->hw.fc.high_water = RxFCHighThresh[bd];
+ ixgb_validate_option(&adapter->hw.fc.high_water, &opt);
+ } else {
+ adapter->hw.fc.high_water = opt.def;
+ }
+ if (!(adapter->hw.fc.type & ixgb_fc_tx_pause) )
+ pr_info("Ignoring RxFCHighThresh when no RxFC\n");
+ }
+ { /* Receive Flow Control Low Threshold */
+ static const struct ixgb_option opt = {
+ .type = range_option,
+ .name = "Rx Flow Control Low Threshold",
+ .err = "using default of " __MODULE_STRING(DEFAULT_FCRTL),
+ .def = DEFAULT_FCRTL,
+ .arg = { .r = { .min = MIN_FCRTL,
+ .max = MAX_FCRTL}}
+ };
+
+ if (num_RxFCLowThresh > bd) {
+ adapter->hw.fc.low_water = RxFCLowThresh[bd];
+ ixgb_validate_option(&adapter->hw.fc.low_water, &opt);
+ } else {
+ adapter->hw.fc.low_water = opt.def;
+ }
+ if (!(adapter->hw.fc.type & ixgb_fc_tx_pause) )
+ pr_info("Ignoring RxFCLowThresh when no RxFC\n");
+ }
+ { /* Flow Control Pause Time Request*/
+ static const struct ixgb_option opt = {
+ .type = range_option,
+ .name = "Flow Control Pause Time Request",
+ .err = "using default of "__MODULE_STRING(DEFAULT_FCPAUSE),
+ .def = DEFAULT_FCPAUSE,
+ .arg = { .r = { .min = MIN_FCPAUSE,
+ .max = MAX_FCPAUSE}}
+ };
+
+ if (num_FCReqTimeout > bd) {
+ unsigned int pause_time = FCReqTimeout[bd];
+ ixgb_validate_option(&pause_time, &opt);
+ adapter->hw.fc.pause_time = pause_time;
+ } else {
+ adapter->hw.fc.pause_time = opt.def;
+ }
+ if (!(adapter->hw.fc.type & ixgb_fc_tx_pause) )
+ pr_info("Ignoring FCReqTimeout when no RxFC\n");
+ }
+ /* high low and spacing check for rx flow control thresholds */
+ if (adapter->hw.fc.type & ixgb_fc_tx_pause) {
+ /* high must be greater than low */
+ if (adapter->hw.fc.high_water < (adapter->hw.fc.low_water + 8)) {
+ /* set defaults */
+ pr_info("RxFCHighThresh must be >= (RxFCLowThresh + 8), Using Defaults\n");
+ adapter->hw.fc.high_water = DEFAULT_FCRTH;
+ adapter->hw.fc.low_water = DEFAULT_FCRTL;
+ }
+ }
+ { /* Receive Interrupt Delay */
+ static const struct ixgb_option opt = {
+ .type = range_option,
+ .name = "Receive Interrupt Delay",
+ .err = "using default of " __MODULE_STRING(DEFAULT_RDTR),
+ .def = DEFAULT_RDTR,
+ .arg = { .r = { .min = MIN_RDTR,
+ .max = MAX_RDTR}}
+ };
+
+ if (num_RxIntDelay > bd) {
+ adapter->rx_int_delay = RxIntDelay[bd];
+ ixgb_validate_option(&adapter->rx_int_delay, &opt);
+ } else {
+ adapter->rx_int_delay = opt.def;
+ }
+ }
+ { /* Transmit Interrupt Delay */
+ static const struct ixgb_option opt = {
+ .type = range_option,
+ .name = "Transmit Interrupt Delay",
+ .err = "using default of " __MODULE_STRING(DEFAULT_TIDV),
+ .def = DEFAULT_TIDV,
+ .arg = { .r = { .min = MIN_TIDV,
+ .max = MAX_TIDV}}
+ };
+
+ if (num_TxIntDelay > bd) {
+ adapter->tx_int_delay = TxIntDelay[bd];
+ ixgb_validate_option(&adapter->tx_int_delay, &opt);
+ } else {
+ adapter->tx_int_delay = opt.def;
+ }
+ }
+
+ { /* Transmit Interrupt Delay Enable */
+ static const struct ixgb_option opt = {
+ .type = enable_option,
+ .name = "Tx Interrupt Delay Enable",
+ .err = "defaulting to Enabled",
+ .def = OPTION_ENABLED
+ };
+
+ if (num_IntDelayEnable > bd) {
+ unsigned int ide = IntDelayEnable[bd];
+ ixgb_validate_option(&ide, &opt);
+ adapter->tx_int_delay_enable = ide;
+ } else {
+ adapter->tx_int_delay_enable = opt.def;
+ }
+ }
+}