summaryrefslogtreecommitdiffstats
path: root/kernel/drivers/net/ethernet/chelsio/cxgb3/ael1002.c
diff options
context:
space:
mode:
Diffstat (limited to 'kernel/drivers/net/ethernet/chelsio/cxgb3/ael1002.c')
-rw-r--r--kernel/drivers/net/ethernet/chelsio/cxgb3/ael1002.c941
1 files changed, 941 insertions, 0 deletions
diff --git a/kernel/drivers/net/ethernet/chelsio/cxgb3/ael1002.c b/kernel/drivers/net/ethernet/chelsio/cxgb3/ael1002.c
new file mode 100644
index 000000000..2028da95a
--- /dev/null
+++ b/kernel/drivers/net/ethernet/chelsio/cxgb3/ael1002.c
@@ -0,0 +1,941 @@
+/*
+ * Copyright (c) 2005-2008 Chelsio, Inc. All rights reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses. You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
+ *
+ * Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ *
+ * - Redistributions of source code must retain the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer.
+ *
+ * - Redistributions in binary form must reproduce the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer in the documentation and/or other materials
+ * provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+#include "common.h"
+#include "regs.h"
+
+enum {
+ AEL100X_TX_CONFIG1 = 0xc002,
+ AEL1002_PWR_DOWN_HI = 0xc011,
+ AEL1002_PWR_DOWN_LO = 0xc012,
+ AEL1002_XFI_EQL = 0xc015,
+ AEL1002_LB_EN = 0xc017,
+ AEL_OPT_SETTINGS = 0xc017,
+ AEL_I2C_CTRL = 0xc30a,
+ AEL_I2C_DATA = 0xc30b,
+ AEL_I2C_STAT = 0xc30c,
+ AEL2005_GPIO_CTRL = 0xc214,
+ AEL2005_GPIO_STAT = 0xc215,
+
+ AEL2020_GPIO_INTR = 0xc103, /* Latch High (LH) */
+ AEL2020_GPIO_CTRL = 0xc108, /* Store Clear (SC) */
+ AEL2020_GPIO_STAT = 0xc10c, /* Read Only (RO) */
+ AEL2020_GPIO_CFG = 0xc110, /* Read Write (RW) */
+
+ AEL2020_GPIO_SDA = 0, /* IN: i2c serial data */
+ AEL2020_GPIO_MODDET = 1, /* IN: Module Detect */
+ AEL2020_GPIO_0 = 3, /* IN: unassigned */
+ AEL2020_GPIO_1 = 2, /* OUT: unassigned */
+ AEL2020_GPIO_LSTAT = AEL2020_GPIO_1, /* wired to link status LED */
+};
+
+enum { edc_none, edc_sr, edc_twinax };
+
+/* PHY module I2C device address */
+enum {
+ MODULE_DEV_ADDR = 0xa0,
+ SFF_DEV_ADDR = 0xa2,
+};
+
+/* PHY transceiver type */
+enum {
+ phy_transtype_unknown = 0,
+ phy_transtype_sfp = 3,
+ phy_transtype_xfp = 6,
+};
+
+#define AEL2005_MODDET_IRQ 4
+
+struct reg_val {
+ unsigned short mmd_addr;
+ unsigned short reg_addr;
+ unsigned short clear_bits;
+ unsigned short set_bits;
+};
+
+static int set_phy_regs(struct cphy *phy, const struct reg_val *rv)
+{
+ int err;
+
+ for (err = 0; rv->mmd_addr && !err; rv++) {
+ if (rv->clear_bits == 0xffff)
+ err = t3_mdio_write(phy, rv->mmd_addr, rv->reg_addr,
+ rv->set_bits);
+ else
+ err = t3_mdio_change_bits(phy, rv->mmd_addr,
+ rv->reg_addr, rv->clear_bits,
+ rv->set_bits);
+ }
+ return err;
+}
+
+static void ael100x_txon(struct cphy *phy)
+{
+ int tx_on_gpio =
+ phy->mdio.prtad == 0 ? F_GPIO7_OUT_VAL : F_GPIO2_OUT_VAL;
+
+ msleep(100);
+ t3_set_reg_field(phy->adapter, A_T3DBG_GPIO_EN, 0, tx_on_gpio);
+ msleep(30);
+}
+
+/*
+ * Read an 8-bit word from a device attached to the PHY's i2c bus.
+ */
+static int ael_i2c_rd(struct cphy *phy, int dev_addr, int word_addr)
+{
+ int i, err;
+ unsigned int stat, data;
+
+ err = t3_mdio_write(phy, MDIO_MMD_PMAPMD, AEL_I2C_CTRL,
+ (dev_addr << 8) | (1 << 8) | word_addr);
+ if (err)
+ return err;
+
+ for (i = 0; i < 200; i++) {
+ msleep(1);
+ err = t3_mdio_read(phy, MDIO_MMD_PMAPMD, AEL_I2C_STAT, &stat);
+ if (err)
+ return err;
+ if ((stat & 3) == 1) {
+ err = t3_mdio_read(phy, MDIO_MMD_PMAPMD, AEL_I2C_DATA,
+ &data);
+ if (err)
+ return err;
+ return data >> 8;
+ }
+ }
+ CH_WARN(phy->adapter, "PHY %u i2c read of dev.addr %#x.%#x timed out\n",
+ phy->mdio.prtad, dev_addr, word_addr);
+ return -ETIMEDOUT;
+}
+
+static int ael1002_power_down(struct cphy *phy, int enable)
+{
+ int err;
+
+ err = t3_mdio_write(phy, MDIO_MMD_PMAPMD, MDIO_PMA_TXDIS, !!enable);
+ if (!err)
+ err = mdio_set_flag(&phy->mdio, phy->mdio.prtad,
+ MDIO_MMD_PMAPMD, MDIO_CTRL1,
+ MDIO_CTRL1_LPOWER, enable);
+ return err;
+}
+
+static int ael1002_reset(struct cphy *phy, int wait)
+{
+ int err;
+
+ if ((err = ael1002_power_down(phy, 0)) ||
+ (err = t3_mdio_write(phy, MDIO_MMD_PMAPMD, AEL100X_TX_CONFIG1, 1)) ||
+ (err = t3_mdio_write(phy, MDIO_MMD_PMAPMD, AEL1002_PWR_DOWN_HI, 0)) ||
+ (err = t3_mdio_write(phy, MDIO_MMD_PMAPMD, AEL1002_PWR_DOWN_LO, 0)) ||
+ (err = t3_mdio_write(phy, MDIO_MMD_PMAPMD, AEL1002_XFI_EQL, 0x18)) ||
+ (err = t3_mdio_change_bits(phy, MDIO_MMD_PMAPMD, AEL1002_LB_EN,
+ 0, 1 << 5)))
+ return err;
+ return 0;
+}
+
+static int ael1002_intr_noop(struct cphy *phy)
+{
+ return 0;
+}
+
+/*
+ * Get link status for a 10GBASE-R device.
+ */
+static int get_link_status_r(struct cphy *phy, int *link_ok, int *speed,
+ int *duplex, int *fc)
+{
+ if (link_ok) {
+ unsigned int stat0, stat1, stat2;
+ int err = t3_mdio_read(phy, MDIO_MMD_PMAPMD,
+ MDIO_PMA_RXDET, &stat0);
+
+ if (!err)
+ err = t3_mdio_read(phy, MDIO_MMD_PCS,
+ MDIO_PCS_10GBRT_STAT1, &stat1);
+ if (!err)
+ err = t3_mdio_read(phy, MDIO_MMD_PHYXS,
+ MDIO_PHYXS_LNSTAT, &stat2);
+ if (err)
+ return err;
+ *link_ok = (stat0 & stat1 & (stat2 >> 12)) & 1;
+ }
+ if (speed)
+ *speed = SPEED_10000;
+ if (duplex)
+ *duplex = DUPLEX_FULL;
+ return 0;
+}
+
+static struct cphy_ops ael1002_ops = {
+ .reset = ael1002_reset,
+ .intr_enable = ael1002_intr_noop,
+ .intr_disable = ael1002_intr_noop,
+ .intr_clear = ael1002_intr_noop,
+ .intr_handler = ael1002_intr_noop,
+ .get_link_status = get_link_status_r,
+ .power_down = ael1002_power_down,
+ .mmds = MDIO_DEVS_PMAPMD | MDIO_DEVS_PCS | MDIO_DEVS_PHYXS,
+};
+
+int t3_ael1002_phy_prep(struct cphy *phy, struct adapter *adapter,
+ int phy_addr, const struct mdio_ops *mdio_ops)
+{
+ cphy_init(phy, adapter, phy_addr, &ael1002_ops, mdio_ops,
+ SUPPORTED_10000baseT_Full | SUPPORTED_AUI | SUPPORTED_FIBRE,
+ "10GBASE-R");
+ ael100x_txon(phy);
+ return 0;
+}
+
+static int ael1006_reset(struct cphy *phy, int wait)
+{
+ return t3_phy_reset(phy, MDIO_MMD_PMAPMD, wait);
+}
+
+static struct cphy_ops ael1006_ops = {
+ .reset = ael1006_reset,
+ .intr_enable = t3_phy_lasi_intr_enable,
+ .intr_disable = t3_phy_lasi_intr_disable,
+ .intr_clear = t3_phy_lasi_intr_clear,
+ .intr_handler = t3_phy_lasi_intr_handler,
+ .get_link_status = get_link_status_r,
+ .power_down = ael1002_power_down,
+ .mmds = MDIO_DEVS_PMAPMD | MDIO_DEVS_PCS | MDIO_DEVS_PHYXS,
+};
+
+int t3_ael1006_phy_prep(struct cphy *phy, struct adapter *adapter,
+ int phy_addr, const struct mdio_ops *mdio_ops)
+{
+ cphy_init(phy, adapter, phy_addr, &ael1006_ops, mdio_ops,
+ SUPPORTED_10000baseT_Full | SUPPORTED_AUI | SUPPORTED_FIBRE,
+ "10GBASE-SR");
+ ael100x_txon(phy);
+ return 0;
+}
+
+/*
+ * Decode our module type.
+ */
+static int ael2xxx_get_module_type(struct cphy *phy, int delay_ms)
+{
+ int v;
+
+ if (delay_ms)
+ msleep(delay_ms);
+
+ /* see SFF-8472 for below */
+ v = ael_i2c_rd(phy, MODULE_DEV_ADDR, 3);
+ if (v < 0)
+ return v;
+
+ if (v == 0x10)
+ return phy_modtype_sr;
+ if (v == 0x20)
+ return phy_modtype_lr;
+ if (v == 0x40)
+ return phy_modtype_lrm;
+
+ v = ael_i2c_rd(phy, MODULE_DEV_ADDR, 6);
+ if (v < 0)
+ return v;
+ if (v != 4)
+ goto unknown;
+
+ v = ael_i2c_rd(phy, MODULE_DEV_ADDR, 10);
+ if (v < 0)
+ return v;
+
+ if (v & 0x80) {
+ v = ael_i2c_rd(phy, MODULE_DEV_ADDR, 0x12);
+ if (v < 0)
+ return v;
+ return v > 10 ? phy_modtype_twinax_long : phy_modtype_twinax;
+ }
+unknown:
+ return phy_modtype_unknown;
+}
+
+/*
+ * Code to support the Aeluros/NetLogic 2005 10Gb PHY.
+ */
+static int ael2005_setup_sr_edc(struct cphy *phy)
+{
+ static const struct reg_val regs[] = {
+ { MDIO_MMD_PMAPMD, 0xc003, 0xffff, 0x181 },
+ { MDIO_MMD_PMAPMD, 0xc010, 0xffff, 0x448a },
+ { MDIO_MMD_PMAPMD, 0xc04a, 0xffff, 0x5200 },
+ { 0, 0, 0, 0 }
+ };
+
+ int i, err;
+
+ err = set_phy_regs(phy, regs);
+ if (err)
+ return err;
+
+ msleep(50);
+
+ if (phy->priv != edc_sr)
+ err = t3_get_edc_fw(phy, EDC_OPT_AEL2005,
+ EDC_OPT_AEL2005_SIZE);
+ if (err)
+ return err;
+
+ for (i = 0; i < EDC_OPT_AEL2005_SIZE / sizeof(u16) && !err; i += 2)
+ err = t3_mdio_write(phy, MDIO_MMD_PMAPMD,
+ phy->phy_cache[i],
+ phy->phy_cache[i + 1]);
+ if (!err)
+ phy->priv = edc_sr;
+ return err;
+}
+
+static int ael2005_setup_twinax_edc(struct cphy *phy, int modtype)
+{
+ static const struct reg_val regs[] = {
+ { MDIO_MMD_PMAPMD, 0xc04a, 0xffff, 0x5a00 },
+ { 0, 0, 0, 0 }
+ };
+ static const struct reg_val preemphasis[] = {
+ { MDIO_MMD_PMAPMD, 0xc014, 0xffff, 0xfe16 },
+ { MDIO_MMD_PMAPMD, 0xc015, 0xffff, 0xa000 },
+ { 0, 0, 0, 0 }
+ };
+ int i, err;
+
+ err = set_phy_regs(phy, regs);
+ if (!err && modtype == phy_modtype_twinax_long)
+ err = set_phy_regs(phy, preemphasis);
+ if (err)
+ return err;
+
+ msleep(50);
+
+ if (phy->priv != edc_twinax)
+ err = t3_get_edc_fw(phy, EDC_TWX_AEL2005,
+ EDC_TWX_AEL2005_SIZE);
+ if (err)
+ return err;
+
+ for (i = 0; i < EDC_TWX_AEL2005_SIZE / sizeof(u16) && !err; i += 2)
+ err = t3_mdio_write(phy, MDIO_MMD_PMAPMD,
+ phy->phy_cache[i],
+ phy->phy_cache[i + 1]);
+ if (!err)
+ phy->priv = edc_twinax;
+ return err;
+}
+
+static int ael2005_get_module_type(struct cphy *phy, int delay_ms)
+{
+ int v;
+ unsigned int stat;
+
+ v = t3_mdio_read(phy, MDIO_MMD_PMAPMD, AEL2005_GPIO_CTRL, &stat);
+ if (v)
+ return v;
+
+ if (stat & (1 << 8)) /* module absent */
+ return phy_modtype_none;
+
+ return ael2xxx_get_module_type(phy, delay_ms);
+}
+
+static int ael2005_intr_enable(struct cphy *phy)
+{
+ int err = t3_mdio_write(phy, MDIO_MMD_PMAPMD, AEL2005_GPIO_CTRL, 0x200);
+ return err ? err : t3_phy_lasi_intr_enable(phy);
+}
+
+static int ael2005_intr_disable(struct cphy *phy)
+{
+ int err = t3_mdio_write(phy, MDIO_MMD_PMAPMD, AEL2005_GPIO_CTRL, 0x100);
+ return err ? err : t3_phy_lasi_intr_disable(phy);
+}
+
+static int ael2005_intr_clear(struct cphy *phy)
+{
+ int err = t3_mdio_write(phy, MDIO_MMD_PMAPMD, AEL2005_GPIO_CTRL, 0xd00);
+ return err ? err : t3_phy_lasi_intr_clear(phy);
+}
+
+static int ael2005_reset(struct cphy *phy, int wait)
+{
+ static const struct reg_val regs0[] = {
+ { MDIO_MMD_PMAPMD, 0xc001, 0, 1 << 5 },
+ { MDIO_MMD_PMAPMD, 0xc017, 0, 1 << 5 },
+ { MDIO_MMD_PMAPMD, 0xc013, 0xffff, 0xf341 },
+ { MDIO_MMD_PMAPMD, 0xc210, 0xffff, 0x8000 },
+ { MDIO_MMD_PMAPMD, 0xc210, 0xffff, 0x8100 },
+ { MDIO_MMD_PMAPMD, 0xc210, 0xffff, 0x8000 },
+ { MDIO_MMD_PMAPMD, 0xc210, 0xffff, 0 },
+ { 0, 0, 0, 0 }
+ };
+ static const struct reg_val regs1[] = {
+ { MDIO_MMD_PMAPMD, 0xca00, 0xffff, 0x0080 },
+ { MDIO_MMD_PMAPMD, 0xca12, 0xffff, 0 },
+ { 0, 0, 0, 0 }
+ };
+
+ int err;
+ unsigned int lasi_ctrl;
+
+ err = t3_mdio_read(phy, MDIO_MMD_PMAPMD, MDIO_PMA_LASI_CTRL,
+ &lasi_ctrl);
+ if (err)
+ return err;
+
+ err = t3_phy_reset(phy, MDIO_MMD_PMAPMD, 0);
+ if (err)
+ return err;
+
+ msleep(125);
+ phy->priv = edc_none;
+ err = set_phy_regs(phy, regs0);
+ if (err)
+ return err;
+
+ msleep(50);
+
+ err = ael2005_get_module_type(phy, 0);
+ if (err < 0)
+ return err;
+ phy->modtype = err;
+
+ if (err == phy_modtype_twinax || err == phy_modtype_twinax_long)
+ err = ael2005_setup_twinax_edc(phy, err);
+ else
+ err = ael2005_setup_sr_edc(phy);
+ if (err)
+ return err;
+
+ err = set_phy_regs(phy, regs1);
+ if (err)
+ return err;
+
+ /* reset wipes out interrupts, reenable them if they were on */
+ if (lasi_ctrl & 1)
+ err = ael2005_intr_enable(phy);
+ return err;
+}
+
+static int ael2005_intr_handler(struct cphy *phy)
+{
+ unsigned int stat;
+ int ret, edc_needed, cause = 0;
+
+ ret = t3_mdio_read(phy, MDIO_MMD_PMAPMD, AEL2005_GPIO_STAT, &stat);
+ if (ret)
+ return ret;
+
+ if (stat & AEL2005_MODDET_IRQ) {
+ ret = t3_mdio_write(phy, MDIO_MMD_PMAPMD, AEL2005_GPIO_CTRL,
+ 0xd00);
+ if (ret)
+ return ret;
+
+ /* modules have max 300 ms init time after hot plug */
+ ret = ael2005_get_module_type(phy, 300);
+ if (ret < 0)
+ return ret;
+
+ phy->modtype = ret;
+ if (ret == phy_modtype_none)
+ edc_needed = phy->priv; /* on unplug retain EDC */
+ else if (ret == phy_modtype_twinax ||
+ ret == phy_modtype_twinax_long)
+ edc_needed = edc_twinax;
+ else
+ edc_needed = edc_sr;
+
+ if (edc_needed != phy->priv) {
+ ret = ael2005_reset(phy, 0);
+ return ret ? ret : cphy_cause_module_change;
+ }
+ cause = cphy_cause_module_change;
+ }
+
+ ret = t3_phy_lasi_intr_handler(phy);
+ if (ret < 0)
+ return ret;
+
+ ret |= cause;
+ return ret ? ret : cphy_cause_link_change;
+}
+
+static struct cphy_ops ael2005_ops = {
+ .reset = ael2005_reset,
+ .intr_enable = ael2005_intr_enable,
+ .intr_disable = ael2005_intr_disable,
+ .intr_clear = ael2005_intr_clear,
+ .intr_handler = ael2005_intr_handler,
+ .get_link_status = get_link_status_r,
+ .power_down = ael1002_power_down,
+ .mmds = MDIO_DEVS_PMAPMD | MDIO_DEVS_PCS | MDIO_DEVS_PHYXS,
+};
+
+int t3_ael2005_phy_prep(struct cphy *phy, struct adapter *adapter,
+ int phy_addr, const struct mdio_ops *mdio_ops)
+{
+ cphy_init(phy, adapter, phy_addr, &ael2005_ops, mdio_ops,
+ SUPPORTED_10000baseT_Full | SUPPORTED_AUI | SUPPORTED_FIBRE |
+ SUPPORTED_IRQ, "10GBASE-R");
+ msleep(125);
+ return t3_mdio_change_bits(phy, MDIO_MMD_PMAPMD, AEL_OPT_SETTINGS, 0,
+ 1 << 5);
+}
+
+/*
+ * Setup EDC and other parameters for operation with an optical module.
+ */
+static int ael2020_setup_sr_edc(struct cphy *phy)
+{
+ static const struct reg_val regs[] = {
+ /* set CDR offset to 10 */
+ { MDIO_MMD_PMAPMD, 0xcc01, 0xffff, 0x488a },
+
+ /* adjust 10G RX bias current */
+ { MDIO_MMD_PMAPMD, 0xcb1b, 0xffff, 0x0200 },
+ { MDIO_MMD_PMAPMD, 0xcb1c, 0xffff, 0x00f0 },
+ { MDIO_MMD_PMAPMD, 0xcc06, 0xffff, 0x00e0 },
+
+ /* end */
+ { 0, 0, 0, 0 }
+ };
+ int err;
+
+ err = set_phy_regs(phy, regs);
+ msleep(50);
+ if (err)
+ return err;
+
+ phy->priv = edc_sr;
+ return 0;
+}
+
+/*
+ * Setup EDC and other parameters for operation with an TWINAX module.
+ */
+static int ael2020_setup_twinax_edc(struct cphy *phy, int modtype)
+{
+ /* set uC to 40MHz */
+ static const struct reg_val uCclock40MHz[] = {
+ { MDIO_MMD_PMAPMD, 0xff28, 0xffff, 0x4001 },
+ { MDIO_MMD_PMAPMD, 0xff2a, 0xffff, 0x0002 },
+ { 0, 0, 0, 0 }
+ };
+
+ /* activate uC clock */
+ static const struct reg_val uCclockActivate[] = {
+ { MDIO_MMD_PMAPMD, 0xd000, 0xffff, 0x5200 },
+ { 0, 0, 0, 0 }
+ };
+
+ /* set PC to start of SRAM and activate uC */
+ static const struct reg_val uCactivate[] = {
+ { MDIO_MMD_PMAPMD, 0xd080, 0xffff, 0x0100 },
+ { MDIO_MMD_PMAPMD, 0xd092, 0xffff, 0x0000 },
+ { 0, 0, 0, 0 }
+ };
+ int i, err;
+
+ /* set uC clock and activate it */
+ err = set_phy_regs(phy, uCclock40MHz);
+ msleep(500);
+ if (err)
+ return err;
+ err = set_phy_regs(phy, uCclockActivate);
+ msleep(500);
+ if (err)
+ return err;
+
+ if (phy->priv != edc_twinax)
+ err = t3_get_edc_fw(phy, EDC_TWX_AEL2020,
+ EDC_TWX_AEL2020_SIZE);
+ if (err)
+ return err;
+
+ for (i = 0; i < EDC_TWX_AEL2020_SIZE / sizeof(u16) && !err; i += 2)
+ err = t3_mdio_write(phy, MDIO_MMD_PMAPMD,
+ phy->phy_cache[i],
+ phy->phy_cache[i + 1]);
+ /* activate uC */
+ err = set_phy_regs(phy, uCactivate);
+ if (!err)
+ phy->priv = edc_twinax;
+ return err;
+}
+
+/*
+ * Return Module Type.
+ */
+static int ael2020_get_module_type(struct cphy *phy, int delay_ms)
+{
+ int v;
+ unsigned int stat;
+
+ v = t3_mdio_read(phy, MDIO_MMD_PMAPMD, AEL2020_GPIO_STAT, &stat);
+ if (v)
+ return v;
+
+ if (stat & (0x1 << (AEL2020_GPIO_MODDET*4))) {
+ /* module absent */
+ return phy_modtype_none;
+ }
+
+ return ael2xxx_get_module_type(phy, delay_ms);
+}
+
+/*
+ * Enable PHY interrupts. We enable "Module Detection" interrupts (on any
+ * state transition) and then generic Link Alarm Status Interrupt (LASI).
+ */
+static int ael2020_intr_enable(struct cphy *phy)
+{
+ static const struct reg_val regs[] = {
+ /* output Module's Loss Of Signal (LOS) to LED */
+ { MDIO_MMD_PMAPMD, AEL2020_GPIO_CFG+AEL2020_GPIO_LSTAT,
+ 0xffff, 0x4 },
+ { MDIO_MMD_PMAPMD, AEL2020_GPIO_CTRL,
+ 0xffff, 0x8 << (AEL2020_GPIO_LSTAT*4) },
+
+ /* enable module detect status change interrupts */
+ { MDIO_MMD_PMAPMD, AEL2020_GPIO_CTRL,
+ 0xffff, 0x2 << (AEL2020_GPIO_MODDET*4) },
+
+ /* end */
+ { 0, 0, 0, 0 }
+ };
+ int err, link_ok = 0;
+
+ /* set up "link status" LED and enable module change interrupts */
+ err = set_phy_regs(phy, regs);
+ if (err)
+ return err;
+
+ err = get_link_status_r(phy, &link_ok, NULL, NULL, NULL);
+ if (err)
+ return err;
+ if (link_ok)
+ t3_link_changed(phy->adapter,
+ phy2portid(phy));
+
+ err = t3_phy_lasi_intr_enable(phy);
+ if (err)
+ return err;
+
+ return 0;
+}
+
+/*
+ * Disable PHY interrupts. The mirror of the above ...
+ */
+static int ael2020_intr_disable(struct cphy *phy)
+{
+ static const struct reg_val regs[] = {
+ /* reset "link status" LED to "off" */
+ { MDIO_MMD_PMAPMD, AEL2020_GPIO_CTRL,
+ 0xffff, 0xb << (AEL2020_GPIO_LSTAT*4) },
+
+ /* disable module detect status change interrupts */
+ { MDIO_MMD_PMAPMD, AEL2020_GPIO_CTRL,
+ 0xffff, 0x1 << (AEL2020_GPIO_MODDET*4) },
+
+ /* end */
+ { 0, 0, 0, 0 }
+ };
+ int err;
+
+ /* turn off "link status" LED and disable module change interrupts */
+ err = set_phy_regs(phy, regs);
+ if (err)
+ return err;
+
+ return t3_phy_lasi_intr_disable(phy);
+}
+
+/*
+ * Clear PHY interrupt state.
+ */
+static int ael2020_intr_clear(struct cphy *phy)
+{
+ /*
+ * The GPIO Interrupt register on the AEL2020 is a "Latching High"
+ * (LH) register which is cleared to the current state when it's read.
+ * Thus, we simply read the register and discard the result.
+ */
+ unsigned int stat;
+ int err = t3_mdio_read(phy, MDIO_MMD_PMAPMD, AEL2020_GPIO_INTR, &stat);
+ return err ? err : t3_phy_lasi_intr_clear(phy);
+}
+
+static const struct reg_val ael2020_reset_regs[] = {
+ /* Erratum #2: CDRLOL asserted, causing PMA link down status */
+ { MDIO_MMD_PMAPMD, 0xc003, 0xffff, 0x3101 },
+
+ /* force XAUI to send LF when RX_LOS is asserted */
+ { MDIO_MMD_PMAPMD, 0xcd40, 0xffff, 0x0001 },
+
+ /* allow writes to transceiver module EEPROM on i2c bus */
+ { MDIO_MMD_PMAPMD, 0xff02, 0xffff, 0x0023 },
+ { MDIO_MMD_PMAPMD, 0xff03, 0xffff, 0x0000 },
+ { MDIO_MMD_PMAPMD, 0xff04, 0xffff, 0x0000 },
+
+ /* end */
+ { 0, 0, 0, 0 }
+};
+/*
+ * Reset the PHY and put it into a canonical operating state.
+ */
+static int ael2020_reset(struct cphy *phy, int wait)
+{
+ int err;
+ unsigned int lasi_ctrl;
+
+ /* grab current interrupt state */
+ err = t3_mdio_read(phy, MDIO_MMD_PMAPMD, MDIO_PMA_LASI_CTRL,
+ &lasi_ctrl);
+ if (err)
+ return err;
+
+ err = t3_phy_reset(phy, MDIO_MMD_PMAPMD, 125);
+ if (err)
+ return err;
+ msleep(100);
+
+ /* basic initialization for all module types */
+ phy->priv = edc_none;
+ err = set_phy_regs(phy, ael2020_reset_regs);
+ if (err)
+ return err;
+
+ /* determine module type and perform appropriate initialization */
+ err = ael2020_get_module_type(phy, 0);
+ if (err < 0)
+ return err;
+ phy->modtype = (u8)err;
+ if (err == phy_modtype_twinax || err == phy_modtype_twinax_long)
+ err = ael2020_setup_twinax_edc(phy, err);
+ else
+ err = ael2020_setup_sr_edc(phy);
+ if (err)
+ return err;
+
+ /* reset wipes out interrupts, reenable them if they were on */
+ if (lasi_ctrl & 1)
+ err = ael2005_intr_enable(phy);
+ return err;
+}
+
+/*
+ * Handle a PHY interrupt.
+ */
+static int ael2020_intr_handler(struct cphy *phy)
+{
+ unsigned int stat;
+ int ret, edc_needed, cause = 0;
+
+ ret = t3_mdio_read(phy, MDIO_MMD_PMAPMD, AEL2020_GPIO_INTR, &stat);
+ if (ret)
+ return ret;
+
+ if (stat & (0x1 << AEL2020_GPIO_MODDET)) {
+ /* modules have max 300 ms init time after hot plug */
+ ret = ael2020_get_module_type(phy, 300);
+ if (ret < 0)
+ return ret;
+
+ phy->modtype = (u8)ret;
+ if (ret == phy_modtype_none)
+ edc_needed = phy->priv; /* on unplug retain EDC */
+ else if (ret == phy_modtype_twinax ||
+ ret == phy_modtype_twinax_long)
+ edc_needed = edc_twinax;
+ else
+ edc_needed = edc_sr;
+
+ if (edc_needed != phy->priv) {
+ ret = ael2020_reset(phy, 0);
+ return ret ? ret : cphy_cause_module_change;
+ }
+ cause = cphy_cause_module_change;
+ }
+
+ ret = t3_phy_lasi_intr_handler(phy);
+ if (ret < 0)
+ return ret;
+
+ ret |= cause;
+ return ret ? ret : cphy_cause_link_change;
+}
+
+static struct cphy_ops ael2020_ops = {
+ .reset = ael2020_reset,
+ .intr_enable = ael2020_intr_enable,
+ .intr_disable = ael2020_intr_disable,
+ .intr_clear = ael2020_intr_clear,
+ .intr_handler = ael2020_intr_handler,
+ .get_link_status = get_link_status_r,
+ .power_down = ael1002_power_down,
+ .mmds = MDIO_DEVS_PMAPMD | MDIO_DEVS_PCS | MDIO_DEVS_PHYXS,
+};
+
+int t3_ael2020_phy_prep(struct cphy *phy, struct adapter *adapter, int phy_addr,
+ const struct mdio_ops *mdio_ops)
+{
+ int err;
+
+ cphy_init(phy, adapter, phy_addr, &ael2020_ops, mdio_ops,
+ SUPPORTED_10000baseT_Full | SUPPORTED_AUI | SUPPORTED_FIBRE |
+ SUPPORTED_IRQ, "10GBASE-R");
+ msleep(125);
+
+ err = set_phy_regs(phy, ael2020_reset_regs);
+ if (err)
+ return err;
+ return 0;
+}
+
+/*
+ * Get link status for a 10GBASE-X device.
+ */
+static int get_link_status_x(struct cphy *phy, int *link_ok, int *speed,
+ int *duplex, int *fc)
+{
+ if (link_ok) {
+ unsigned int stat0, stat1, stat2;
+ int err = t3_mdio_read(phy, MDIO_MMD_PMAPMD,
+ MDIO_PMA_RXDET, &stat0);
+
+ if (!err)
+ err = t3_mdio_read(phy, MDIO_MMD_PCS,
+ MDIO_PCS_10GBX_STAT1, &stat1);
+ if (!err)
+ err = t3_mdio_read(phy, MDIO_MMD_PHYXS,
+ MDIO_PHYXS_LNSTAT, &stat2);
+ if (err)
+ return err;
+ *link_ok = (stat0 & (stat1 >> 12) & (stat2 >> 12)) & 1;
+ }
+ if (speed)
+ *speed = SPEED_10000;
+ if (duplex)
+ *duplex = DUPLEX_FULL;
+ return 0;
+}
+
+static struct cphy_ops qt2045_ops = {
+ .reset = ael1006_reset,
+ .intr_enable = t3_phy_lasi_intr_enable,
+ .intr_disable = t3_phy_lasi_intr_disable,
+ .intr_clear = t3_phy_lasi_intr_clear,
+ .intr_handler = t3_phy_lasi_intr_handler,
+ .get_link_status = get_link_status_x,
+ .power_down = ael1002_power_down,
+ .mmds = MDIO_DEVS_PMAPMD | MDIO_DEVS_PCS | MDIO_DEVS_PHYXS,
+};
+
+int t3_qt2045_phy_prep(struct cphy *phy, struct adapter *adapter,
+ int phy_addr, const struct mdio_ops *mdio_ops)
+{
+ unsigned int stat;
+
+ cphy_init(phy, adapter, phy_addr, &qt2045_ops, mdio_ops,
+ SUPPORTED_10000baseT_Full | SUPPORTED_AUI | SUPPORTED_TP,
+ "10GBASE-CX4");
+
+ /*
+ * Some cards where the PHY is supposed to be at address 0 actually
+ * have it at 1.
+ */
+ if (!phy_addr &&
+ !t3_mdio_read(phy, MDIO_MMD_PMAPMD, MDIO_STAT1, &stat) &&
+ stat == 0xffff)
+ phy->mdio.prtad = 1;
+ return 0;
+}
+
+static int xaui_direct_reset(struct cphy *phy, int wait)
+{
+ return 0;
+}
+
+static int xaui_direct_get_link_status(struct cphy *phy, int *link_ok,
+ int *speed, int *duplex, int *fc)
+{
+ if (link_ok) {
+ unsigned int status;
+ int prtad = phy->mdio.prtad;
+
+ status = t3_read_reg(phy->adapter,
+ XGM_REG(A_XGM_SERDES_STAT0, prtad)) |
+ t3_read_reg(phy->adapter,
+ XGM_REG(A_XGM_SERDES_STAT1, prtad)) |
+ t3_read_reg(phy->adapter,
+ XGM_REG(A_XGM_SERDES_STAT2, prtad)) |
+ t3_read_reg(phy->adapter,
+ XGM_REG(A_XGM_SERDES_STAT3, prtad));
+ *link_ok = !(status & F_LOWSIG0);
+ }
+ if (speed)
+ *speed = SPEED_10000;
+ if (duplex)
+ *duplex = DUPLEX_FULL;
+ return 0;
+}
+
+static int xaui_direct_power_down(struct cphy *phy, int enable)
+{
+ return 0;
+}
+
+static struct cphy_ops xaui_direct_ops = {
+ .reset = xaui_direct_reset,
+ .intr_enable = ael1002_intr_noop,
+ .intr_disable = ael1002_intr_noop,
+ .intr_clear = ael1002_intr_noop,
+ .intr_handler = ael1002_intr_noop,
+ .get_link_status = xaui_direct_get_link_status,
+ .power_down = xaui_direct_power_down,
+};
+
+int t3_xaui_direct_phy_prep(struct cphy *phy, struct adapter *adapter,
+ int phy_addr, const struct mdio_ops *mdio_ops)
+{
+ cphy_init(phy, adapter, phy_addr, &xaui_direct_ops, mdio_ops,
+ SUPPORTED_10000baseT_Full | SUPPORTED_AUI | SUPPORTED_TP,
+ "10GBASE-CX4");
+ return 0;
+}