summaryrefslogtreecommitdiffstats
path: root/kernel/drivers/net/ethernet/chelsio/cxgb/my3126.c
diff options
context:
space:
mode:
Diffstat (limited to 'kernel/drivers/net/ethernet/chelsio/cxgb/my3126.c')
-rw-r--r--kernel/drivers/net/ethernet/chelsio/cxgb/my3126.c209
1 files changed, 209 insertions, 0 deletions
diff --git a/kernel/drivers/net/ethernet/chelsio/cxgb/my3126.c b/kernel/drivers/net/ethernet/chelsio/cxgb/my3126.c
new file mode 100644
index 000000000..a683fd3bb
--- /dev/null
+++ b/kernel/drivers/net/ethernet/chelsio/cxgb/my3126.c
@@ -0,0 +1,209 @@
+/* $Date: 2005/11/12 02:13:49 $ $RCSfile: my3126.c,v $ $Revision: 1.15 $ */
+#include "cphy.h"
+#include "elmer0.h"
+#include "suni1x10gexp_regs.h"
+
+/* Port Reset */
+static int my3126_reset(struct cphy *cphy, int wait)
+{
+ /*
+ * This can be done through registers. It is not required since
+ * a full chip reset is used.
+ */
+ return 0;
+}
+
+static int my3126_interrupt_enable(struct cphy *cphy)
+{
+ schedule_delayed_work(&cphy->phy_update, HZ/30);
+ t1_tpi_read(cphy->adapter, A_ELMER0_GPO, &cphy->elmer_gpo);
+ return 0;
+}
+
+static int my3126_interrupt_disable(struct cphy *cphy)
+{
+ cancel_delayed_work_sync(&cphy->phy_update);
+ return 0;
+}
+
+static int my3126_interrupt_clear(struct cphy *cphy)
+{
+ return 0;
+}
+
+#define OFFSET(REG_ADDR) (REG_ADDR << 2)
+
+static int my3126_interrupt_handler(struct cphy *cphy)
+{
+ u32 val;
+ u16 val16;
+ u16 status;
+ u32 act_count;
+ adapter_t *adapter;
+ adapter = cphy->adapter;
+
+ if (cphy->count == 50) {
+ cphy_mdio_read(cphy, MDIO_MMD_PMAPMD, MDIO_STAT1, &val);
+ val16 = (u16) val;
+ status = cphy->bmsr ^ val16;
+
+ if (status & MDIO_STAT1_LSTATUS)
+ t1_link_changed(adapter, 0);
+ cphy->bmsr = val16;
+
+ /* We have only enabled link change interrupts so it
+ must be that
+ */
+ cphy->count = 0;
+ }
+
+ t1_tpi_write(adapter, OFFSET(SUNI1x10GEXP_REG_MSTAT_CONTROL),
+ SUNI1x10GEXP_BITMSK_MSTAT_SNAP);
+ t1_tpi_read(adapter,
+ OFFSET(SUNI1x10GEXP_REG_MSTAT_COUNTER_1_LOW), &act_count);
+ t1_tpi_read(adapter,
+ OFFSET(SUNI1x10GEXP_REG_MSTAT_COUNTER_33_LOW), &val);
+ act_count += val;
+
+ /* Populate elmer_gpo with the register value */
+ t1_tpi_read(adapter, A_ELMER0_GPO, &val);
+ cphy->elmer_gpo = val;
+
+ if ( (val & (1 << 8)) || (val & (1 << 19)) ||
+ (cphy->act_count == act_count) || cphy->act_on ) {
+ if (is_T2(adapter))
+ val |= (1 << 9);
+ else if (t1_is_T1B(adapter))
+ val |= (1 << 20);
+ cphy->act_on = 0;
+ } else {
+ if (is_T2(adapter))
+ val &= ~(1 << 9);
+ else if (t1_is_T1B(adapter))
+ val &= ~(1 << 20);
+ cphy->act_on = 1;
+ }
+
+ t1_tpi_write(adapter, A_ELMER0_GPO, val);
+
+ cphy->elmer_gpo = val;
+ cphy->act_count = act_count;
+ cphy->count++;
+
+ return cphy_cause_link_change;
+}
+
+static void my3216_poll(struct work_struct *work)
+{
+ struct cphy *cphy = container_of(work, struct cphy, phy_update.work);
+
+ my3126_interrupt_handler(cphy);
+}
+
+static int my3126_set_loopback(struct cphy *cphy, int on)
+{
+ return 0;
+}
+
+/* To check the activity LED */
+static int my3126_get_link_status(struct cphy *cphy,
+ int *link_ok, int *speed, int *duplex, int *fc)
+{
+ u32 val;
+ u16 val16;
+ adapter_t *adapter;
+
+ adapter = cphy->adapter;
+ cphy_mdio_read(cphy, MDIO_MMD_PMAPMD, MDIO_STAT1, &val);
+ val16 = (u16) val;
+
+ /* Populate elmer_gpo with the register value */
+ t1_tpi_read(adapter, A_ELMER0_GPO, &val);
+ cphy->elmer_gpo = val;
+
+ *link_ok = (val16 & MDIO_STAT1_LSTATUS);
+
+ if (*link_ok) {
+ /* Turn on the LED. */
+ if (is_T2(adapter))
+ val &= ~(1 << 8);
+ else if (t1_is_T1B(adapter))
+ val &= ~(1 << 19);
+ } else {
+ /* Turn off the LED. */
+ if (is_T2(adapter))
+ val |= (1 << 8);
+ else if (t1_is_T1B(adapter))
+ val |= (1 << 19);
+ }
+
+ t1_tpi_write(adapter, A_ELMER0_GPO, val);
+ cphy->elmer_gpo = val;
+ *speed = SPEED_10000;
+ *duplex = DUPLEX_FULL;
+
+ /* need to add flow control */
+ if (fc)
+ *fc = PAUSE_RX | PAUSE_TX;
+
+ return 0;
+}
+
+static void my3126_destroy(struct cphy *cphy)
+{
+ kfree(cphy);
+}
+
+static struct cphy_ops my3126_ops = {
+ .destroy = my3126_destroy,
+ .reset = my3126_reset,
+ .interrupt_enable = my3126_interrupt_enable,
+ .interrupt_disable = my3126_interrupt_disable,
+ .interrupt_clear = my3126_interrupt_clear,
+ .interrupt_handler = my3126_interrupt_handler,
+ .get_link_status = my3126_get_link_status,
+ .set_loopback = my3126_set_loopback,
+ .mmds = (MDIO_DEVS_PMAPMD | MDIO_DEVS_PCS |
+ MDIO_DEVS_PHYXS),
+};
+
+static struct cphy *my3126_phy_create(struct net_device *dev,
+ int phy_addr, const struct mdio_ops *mdio_ops)
+{
+ struct cphy *cphy = kzalloc(sizeof (*cphy), GFP_KERNEL);
+
+ if (!cphy)
+ return NULL;
+
+ cphy_init(cphy, dev, phy_addr, &my3126_ops, mdio_ops);
+ INIT_DELAYED_WORK(&cphy->phy_update, my3216_poll);
+ cphy->bmsr = 0;
+
+ return cphy;
+}
+
+/* Chip Reset */
+static int my3126_phy_reset(adapter_t * adapter)
+{
+ u32 val;
+
+ t1_tpi_read(adapter, A_ELMER0_GPO, &val);
+ val &= ~4;
+ t1_tpi_write(adapter, A_ELMER0_GPO, val);
+ msleep(100);
+
+ t1_tpi_write(adapter, A_ELMER0_GPO, val | 4);
+ msleep(1000);
+
+ /* Now lets enable the Laser. Delay 100us */
+ t1_tpi_read(adapter, A_ELMER0_GPO, &val);
+ val |= 0x8000;
+ t1_tpi_write(adapter, A_ELMER0_GPO, val);
+ udelay(100);
+ return 0;
+}
+
+const struct gphy t1_my3126_ops = {
+ .create = my3126_phy_create,
+ .reset = my3126_phy_reset
+};