summaryrefslogtreecommitdiffstats
path: root/kernel/drivers/net/dsa
diff options
context:
space:
mode:
Diffstat (limited to 'kernel/drivers/net/dsa')
-rw-r--r--kernel/drivers/net/dsa/Kconfig68
-rw-r--r--kernel/drivers/net/dsa/Makefile16
-rw-r--r--kernel/drivers/net/dsa/bcm_sf2.c1091
-rw-r--r--kernel/drivers/net/dsa/bcm_sf2.h149
-rw-r--r--kernel/drivers/net/dsa/bcm_sf2_regs.h250
-rw-r--r--kernel/drivers/net/dsa/mv88e6060.c302
-rw-r--r--kernel/drivers/net/dsa/mv88e6123_61_65.c301
-rw-r--r--kernel/drivers/net/dsa/mv88e6131.c319
-rw-r--r--kernel/drivers/net/dsa/mv88e6171.c311
-rw-r--r--kernel/drivers/net/dsa/mv88e6352.c554
-rw-r--r--kernel/drivers/net/dsa/mv88e6xxx.c1486
-rw-r--r--kernel/drivers/net/dsa/mv88e6xxx.h339
12 files changed, 5186 insertions, 0 deletions
diff --git a/kernel/drivers/net/dsa/Kconfig b/kernel/drivers/net/dsa/Kconfig
new file mode 100644
index 000000000..18550c7eb
--- /dev/null
+++ b/kernel/drivers/net/dsa/Kconfig
@@ -0,0 +1,68 @@
+menu "Distributed Switch Architecture drivers"
+ depends on HAVE_NET_DSA
+
+config NET_DSA_MV88E6XXX
+ tristate
+ default n
+
+config NET_DSA_MV88E6060
+ tristate "Marvell 88E6060 ethernet switch chip support"
+ depends on NET_DSA
+ select NET_DSA_TAG_TRAILER
+ ---help---
+ This enables support for the Marvell 88E6060 ethernet switch
+ chip.
+
+config NET_DSA_MV88E6XXX_NEED_PPU
+ bool
+ default n
+
+config NET_DSA_MV88E6131
+ tristate "Marvell 88E6085/6095/6095F/6131 ethernet switch chip support"
+ depends on NET_DSA
+ select NET_DSA_MV88E6XXX
+ select NET_DSA_MV88E6XXX_NEED_PPU
+ select NET_DSA_TAG_DSA
+ ---help---
+ This enables support for the Marvell 88E6085/6095/6095F/6131
+ ethernet switch chips.
+
+config NET_DSA_MV88E6123_61_65
+ tristate "Marvell 88E6123/6161/6165 ethernet switch chip support"
+ depends on NET_DSA
+ select NET_DSA_MV88E6XXX
+ select NET_DSA_TAG_EDSA
+ ---help---
+ This enables support for the Marvell 88E6123/6161/6165
+ ethernet switch chips.
+
+config NET_DSA_MV88E6171
+ tristate "Marvell 88E6171/6172 ethernet switch chip support"
+ depends on NET_DSA
+ select NET_DSA_MV88E6XXX
+ select NET_DSA_TAG_EDSA
+ ---help---
+ This enables support for the Marvell 88E6171/6172 ethernet switch
+ chips.
+
+config NET_DSA_MV88E6352
+ tristate "Marvell 88E6176/88E6352 ethernet switch chip support"
+ depends on NET_DSA
+ select NET_DSA_MV88E6XXX
+ select NET_DSA_TAG_EDSA
+ ---help---
+ This enables support for the Marvell 88E6176 and 88E6352 ethernet
+ switch chips.
+
+config NET_DSA_BCM_SF2
+ tristate "Broadcom Starfighter 2 Ethernet switch support"
+ depends on HAS_IOMEM && NET_DSA
+ select NET_DSA_TAG_BRCM
+ select FIXED_PHY
+ select BCM7XXX_PHY
+ select MDIO_BCM_UNIMAC
+ ---help---
+ This enables support for the Broadcom Starfighter 2 Ethernet
+ switch chips.
+
+endmenu
diff --git a/kernel/drivers/net/dsa/Makefile b/kernel/drivers/net/dsa/Makefile
new file mode 100644
index 000000000..e2d51c4b9
--- /dev/null
+++ b/kernel/drivers/net/dsa/Makefile
@@ -0,0 +1,16 @@
+obj-$(CONFIG_NET_DSA_MV88E6060) += mv88e6060.o
+obj-$(CONFIG_NET_DSA_MV88E6XXX) += mv88e6xxx_drv.o
+mv88e6xxx_drv-y += mv88e6xxx.o
+ifdef CONFIG_NET_DSA_MV88E6123_61_65
+mv88e6xxx_drv-y += mv88e6123_61_65.o
+endif
+ifdef CONFIG_NET_DSA_MV88E6131
+mv88e6xxx_drv-y += mv88e6131.o
+endif
+ifdef CONFIG_NET_DSA_MV88E6352
+mv88e6xxx_drv-y += mv88e6352.o
+endif
+ifdef CONFIG_NET_DSA_MV88E6171
+mv88e6xxx_drv-y += mv88e6171.o
+endif
+obj-$(CONFIG_NET_DSA_BCM_SF2) += bcm_sf2.o
diff --git a/kernel/drivers/net/dsa/bcm_sf2.c b/kernel/drivers/net/dsa/bcm_sf2.c
new file mode 100644
index 000000000..cedb572bf
--- /dev/null
+++ b/kernel/drivers/net/dsa/bcm_sf2.c
@@ -0,0 +1,1091 @@
+/*
+ * Broadcom Starfighter 2 DSA switch driver
+ *
+ * Copyright (C) 2014, Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/list.h>
+#include <linux/module.h>
+#include <linux/netdevice.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/of.h>
+#include <linux/phy.h>
+#include <linux/phy_fixed.h>
+#include <linux/mii.h>
+#include <linux/of.h>
+#include <linux/of_irq.h>
+#include <linux/of_address.h>
+#include <net/dsa.h>
+#include <linux/ethtool.h>
+#include <linux/if_bridge.h>
+
+#include "bcm_sf2.h"
+#include "bcm_sf2_regs.h"
+
+/* String, offset, and register size in bytes if different from 4 bytes */
+static const struct bcm_sf2_hw_stats bcm_sf2_mib[] = {
+ { "TxOctets", 0x000, 8 },
+ { "TxDropPkts", 0x020 },
+ { "TxQPKTQ0", 0x030 },
+ { "TxBroadcastPkts", 0x040 },
+ { "TxMulticastPkts", 0x050 },
+ { "TxUnicastPKts", 0x060 },
+ { "TxCollisions", 0x070 },
+ { "TxSingleCollision", 0x080 },
+ { "TxMultipleCollision", 0x090 },
+ { "TxDeferredCollision", 0x0a0 },
+ { "TxLateCollision", 0x0b0 },
+ { "TxExcessiveCollision", 0x0c0 },
+ { "TxFrameInDisc", 0x0d0 },
+ { "TxPausePkts", 0x0e0 },
+ { "TxQPKTQ1", 0x0f0 },
+ { "TxQPKTQ2", 0x100 },
+ { "TxQPKTQ3", 0x110 },
+ { "TxQPKTQ4", 0x120 },
+ { "TxQPKTQ5", 0x130 },
+ { "RxOctets", 0x140, 8 },
+ { "RxUndersizePkts", 0x160 },
+ { "RxPausePkts", 0x170 },
+ { "RxPkts64Octets", 0x180 },
+ { "RxPkts65to127Octets", 0x190 },
+ { "RxPkts128to255Octets", 0x1a0 },
+ { "RxPkts256to511Octets", 0x1b0 },
+ { "RxPkts512to1023Octets", 0x1c0 },
+ { "RxPkts1024toMaxPktsOctets", 0x1d0 },
+ { "RxOversizePkts", 0x1e0 },
+ { "RxJabbers", 0x1f0 },
+ { "RxAlignmentErrors", 0x200 },
+ { "RxFCSErrors", 0x210 },
+ { "RxGoodOctets", 0x220, 8 },
+ { "RxDropPkts", 0x240 },
+ { "RxUnicastPkts", 0x250 },
+ { "RxMulticastPkts", 0x260 },
+ { "RxBroadcastPkts", 0x270 },
+ { "RxSAChanges", 0x280 },
+ { "RxFragments", 0x290 },
+ { "RxJumboPkt", 0x2a0 },
+ { "RxSymblErr", 0x2b0 },
+ { "InRangeErrCount", 0x2c0 },
+ { "OutRangeErrCount", 0x2d0 },
+ { "EEELpiEvent", 0x2e0 },
+ { "EEELpiDuration", 0x2f0 },
+ { "RxDiscard", 0x300, 8 },
+ { "TxQPKTQ6", 0x320 },
+ { "TxQPKTQ7", 0x330 },
+ { "TxPkts64Octets", 0x340 },
+ { "TxPkts65to127Octets", 0x350 },
+ { "TxPkts128to255Octets", 0x360 },
+ { "TxPkts256to511Ocets", 0x370 },
+ { "TxPkts512to1023Ocets", 0x380 },
+ { "TxPkts1024toMaxPktOcets", 0x390 },
+};
+
+#define BCM_SF2_STATS_SIZE ARRAY_SIZE(bcm_sf2_mib)
+
+static void bcm_sf2_sw_get_strings(struct dsa_switch *ds,
+ int port, uint8_t *data)
+{
+ unsigned int i;
+
+ for (i = 0; i < BCM_SF2_STATS_SIZE; i++)
+ memcpy(data + i * ETH_GSTRING_LEN,
+ bcm_sf2_mib[i].string, ETH_GSTRING_LEN);
+}
+
+static void bcm_sf2_sw_get_ethtool_stats(struct dsa_switch *ds,
+ int port, uint64_t *data)
+{
+ struct bcm_sf2_priv *priv = ds_to_priv(ds);
+ const struct bcm_sf2_hw_stats *s;
+ unsigned int i;
+ u64 val = 0;
+ u32 offset;
+
+ mutex_lock(&priv->stats_mutex);
+
+ /* Now fetch the per-port counters */
+ for (i = 0; i < BCM_SF2_STATS_SIZE; i++) {
+ s = &bcm_sf2_mib[i];
+
+ /* Do a latched 64-bit read if needed */
+ offset = s->reg + CORE_P_MIB_OFFSET(port);
+ if (s->sizeof_stat == 8)
+ val = core_readq(priv, offset);
+ else
+ val = core_readl(priv, offset);
+
+ data[i] = (u64)val;
+ }
+
+ mutex_unlock(&priv->stats_mutex);
+}
+
+static int bcm_sf2_sw_get_sset_count(struct dsa_switch *ds)
+{
+ return BCM_SF2_STATS_SIZE;
+}
+
+static char *bcm_sf2_sw_probe(struct device *host_dev, int sw_addr)
+{
+ return "Broadcom Starfighter 2";
+}
+
+static void bcm_sf2_imp_vlan_setup(struct dsa_switch *ds, int cpu_port)
+{
+ struct bcm_sf2_priv *priv = ds_to_priv(ds);
+ unsigned int i;
+ u32 reg;
+
+ /* Enable the IMP Port to be in the same VLAN as the other ports
+ * on a per-port basis such that we only have Port i and IMP in
+ * the same VLAN.
+ */
+ for (i = 0; i < priv->hw_params.num_ports; i++) {
+ if (!((1 << i) & ds->phys_port_mask))
+ continue;
+
+ reg = core_readl(priv, CORE_PORT_VLAN_CTL_PORT(i));
+ reg |= (1 << cpu_port);
+ core_writel(priv, reg, CORE_PORT_VLAN_CTL_PORT(i));
+ }
+}
+
+static void bcm_sf2_imp_setup(struct dsa_switch *ds, int port)
+{
+ struct bcm_sf2_priv *priv = ds_to_priv(ds);
+ u32 reg, val;
+
+ /* Enable the port memories */
+ reg = core_readl(priv, CORE_MEM_PSM_VDD_CTRL);
+ reg &= ~P_TXQ_PSM_VDD(port);
+ core_writel(priv, reg, CORE_MEM_PSM_VDD_CTRL);
+
+ /* Enable Broadcast, Multicast, Unicast forwarding to IMP port */
+ reg = core_readl(priv, CORE_IMP_CTL);
+ reg |= (RX_BCST_EN | RX_MCST_EN | RX_UCST_EN);
+ reg &= ~(RX_DIS | TX_DIS);
+ core_writel(priv, reg, CORE_IMP_CTL);
+
+ /* Enable forwarding */
+ core_writel(priv, SW_FWDG_EN, CORE_SWMODE);
+
+ /* Enable IMP port in dumb mode */
+ reg = core_readl(priv, CORE_SWITCH_CTRL);
+ reg |= MII_DUMB_FWDG_EN;
+ core_writel(priv, reg, CORE_SWITCH_CTRL);
+
+ /* Resolve which bit controls the Broadcom tag */
+ switch (port) {
+ case 8:
+ val = BRCM_HDR_EN_P8;
+ break;
+ case 7:
+ val = BRCM_HDR_EN_P7;
+ break;
+ case 5:
+ val = BRCM_HDR_EN_P5;
+ break;
+ default:
+ val = 0;
+ break;
+ }
+
+ /* Enable Broadcom tags for IMP port */
+ reg = core_readl(priv, CORE_BRCM_HDR_CTRL);
+ reg |= val;
+ core_writel(priv, reg, CORE_BRCM_HDR_CTRL);
+
+ /* Enable reception Broadcom tag for CPU TX (switch RX) to
+ * allow us to tag outgoing frames
+ */
+ reg = core_readl(priv, CORE_BRCM_HDR_RX_DIS);
+ reg &= ~(1 << port);
+ core_writel(priv, reg, CORE_BRCM_HDR_RX_DIS);
+
+ /* Enable transmission of Broadcom tags from the switch (CPU RX) to
+ * allow delivering frames to the per-port net_devices
+ */
+ reg = core_readl(priv, CORE_BRCM_HDR_TX_DIS);
+ reg &= ~(1 << port);
+ core_writel(priv, reg, CORE_BRCM_HDR_TX_DIS);
+
+ /* Force link status for IMP port */
+ reg = core_readl(priv, CORE_STS_OVERRIDE_IMP);
+ reg |= (MII_SW_OR | LINK_STS);
+ core_writel(priv, reg, CORE_STS_OVERRIDE_IMP);
+}
+
+static void bcm_sf2_eee_enable_set(struct dsa_switch *ds, int port, bool enable)
+{
+ struct bcm_sf2_priv *priv = ds_to_priv(ds);
+ u32 reg;
+
+ reg = core_readl(priv, CORE_EEE_EN_CTRL);
+ if (enable)
+ reg |= 1 << port;
+ else
+ reg &= ~(1 << port);
+ core_writel(priv, reg, CORE_EEE_EN_CTRL);
+}
+
+static void bcm_sf2_gphy_enable_set(struct dsa_switch *ds, bool enable)
+{
+ struct bcm_sf2_priv *priv = ds_to_priv(ds);
+ u32 reg;
+
+ reg = reg_readl(priv, REG_SPHY_CNTRL);
+ if (enable) {
+ reg |= PHY_RESET;
+ reg &= ~(EXT_PWR_DOWN | IDDQ_BIAS | CK25_DIS);
+ reg_writel(priv, reg, REG_SPHY_CNTRL);
+ udelay(21);
+ reg = reg_readl(priv, REG_SPHY_CNTRL);
+ reg &= ~PHY_RESET;
+ } else {
+ reg |= EXT_PWR_DOWN | IDDQ_BIAS | PHY_RESET;
+ reg_writel(priv, reg, REG_SPHY_CNTRL);
+ mdelay(1);
+ reg |= CK25_DIS;
+ }
+ reg_writel(priv, reg, REG_SPHY_CNTRL);
+
+ /* Use PHY-driven LED signaling */
+ if (!enable) {
+ reg = reg_readl(priv, REG_LED_CNTRL(0));
+ reg |= SPDLNK_SRC_SEL;
+ reg_writel(priv, reg, REG_LED_CNTRL(0));
+ }
+}
+
+static int bcm_sf2_port_setup(struct dsa_switch *ds, int port,
+ struct phy_device *phy)
+{
+ struct bcm_sf2_priv *priv = ds_to_priv(ds);
+ s8 cpu_port = ds->dst[ds->index].cpu_port;
+ u32 reg;
+
+ /* Clear the memory power down */
+ reg = core_readl(priv, CORE_MEM_PSM_VDD_CTRL);
+ reg &= ~P_TXQ_PSM_VDD(port);
+ core_writel(priv, reg, CORE_MEM_PSM_VDD_CTRL);
+
+ /* Clear the Rx and Tx disable bits and set to no spanning tree */
+ core_writel(priv, 0, CORE_G_PCTL_PORT(port));
+
+ /* Re-enable the GPHY and re-apply workarounds */
+ if (port == 0 && priv->hw_params.num_gphy == 1) {
+ bcm_sf2_gphy_enable_set(ds, true);
+ if (phy) {
+ /* if phy_stop() has been called before, phy
+ * will be in halted state, and phy_start()
+ * will call resume.
+ *
+ * the resume path does not configure back
+ * autoneg settings, and since we hard reset
+ * the phy manually here, we need to reset the
+ * state machine also.
+ */
+ phy->state = PHY_READY;
+ phy_init_hw(phy);
+ }
+ }
+
+ /* Enable port 7 interrupts to get notified */
+ if (port == 7)
+ intrl2_1_mask_clear(priv, P_IRQ_MASK(P7_IRQ_OFF));
+
+ /* Set this port, and only this one to be in the default VLAN,
+ * if member of a bridge, restore its membership prior to
+ * bringing down this port.
+ */
+ reg = core_readl(priv, CORE_PORT_VLAN_CTL_PORT(port));
+ reg &= ~PORT_VLAN_CTRL_MASK;
+ reg |= (1 << port);
+ reg |= priv->port_sts[port].vlan_ctl_mask;
+ core_writel(priv, reg, CORE_PORT_VLAN_CTL_PORT(port));
+
+ bcm_sf2_imp_vlan_setup(ds, cpu_port);
+
+ /* If EEE was enabled, restore it */
+ if (priv->port_sts[port].eee.eee_enabled)
+ bcm_sf2_eee_enable_set(ds, port, true);
+
+ return 0;
+}
+
+static void bcm_sf2_port_disable(struct dsa_switch *ds, int port,
+ struct phy_device *phy)
+{
+ struct bcm_sf2_priv *priv = ds_to_priv(ds);
+ u32 off, reg;
+
+ if (priv->wol_ports_mask & (1 << port))
+ return;
+
+ if (port == 7) {
+ intrl2_1_mask_set(priv, P_IRQ_MASK(P7_IRQ_OFF));
+ intrl2_1_writel(priv, P_IRQ_MASK(P7_IRQ_OFF), INTRL2_CPU_CLEAR);
+ }
+
+ if (port == 0 && priv->hw_params.num_gphy == 1)
+ bcm_sf2_gphy_enable_set(ds, false);
+
+ if (dsa_is_cpu_port(ds, port))
+ off = CORE_IMP_CTL;
+ else
+ off = CORE_G_PCTL_PORT(port);
+
+ reg = core_readl(priv, off);
+ reg |= RX_DIS | TX_DIS;
+ core_writel(priv, reg, off);
+
+ /* Power down the port memory */
+ reg = core_readl(priv, CORE_MEM_PSM_VDD_CTRL);
+ reg |= P_TXQ_PSM_VDD(port);
+ core_writel(priv, reg, CORE_MEM_PSM_VDD_CTRL);
+}
+
+/* Returns 0 if EEE was not enabled, or 1 otherwise
+ */
+static int bcm_sf2_eee_init(struct dsa_switch *ds, int port,
+ struct phy_device *phy)
+{
+ struct bcm_sf2_priv *priv = ds_to_priv(ds);
+ struct ethtool_eee *p = &priv->port_sts[port].eee;
+ int ret;
+
+ p->supported = (SUPPORTED_1000baseT_Full | SUPPORTED_100baseT_Full);
+
+ ret = phy_init_eee(phy, 0);
+ if (ret)
+ return 0;
+
+ bcm_sf2_eee_enable_set(ds, port, true);
+
+ return 1;
+}
+
+static int bcm_sf2_sw_get_eee(struct dsa_switch *ds, int port,
+ struct ethtool_eee *e)
+{
+ struct bcm_sf2_priv *priv = ds_to_priv(ds);
+ struct ethtool_eee *p = &priv->port_sts[port].eee;
+ u32 reg;
+
+ reg = core_readl(priv, CORE_EEE_LPI_INDICATE);
+ e->eee_enabled = p->eee_enabled;
+ e->eee_active = !!(reg & (1 << port));
+
+ return 0;
+}
+
+static int bcm_sf2_sw_set_eee(struct dsa_switch *ds, int port,
+ struct phy_device *phydev,
+ struct ethtool_eee *e)
+{
+ struct bcm_sf2_priv *priv = ds_to_priv(ds);
+ struct ethtool_eee *p = &priv->port_sts[port].eee;
+
+ p->eee_enabled = e->eee_enabled;
+
+ if (!p->eee_enabled) {
+ bcm_sf2_eee_enable_set(ds, port, false);
+ } else {
+ p->eee_enabled = bcm_sf2_eee_init(ds, port, phydev);
+ if (!p->eee_enabled)
+ return -EOPNOTSUPP;
+ }
+
+ return 0;
+}
+
+/* Fast-ageing of ARL entries for a given port, equivalent to an ARL
+ * flush for that port.
+ */
+static int bcm_sf2_sw_fast_age_port(struct dsa_switch *ds, int port)
+{
+ struct bcm_sf2_priv *priv = ds_to_priv(ds);
+ unsigned int timeout = 1000;
+ u32 reg;
+
+ core_writel(priv, port, CORE_FAST_AGE_PORT);
+
+ reg = core_readl(priv, CORE_FAST_AGE_CTRL);
+ reg |= EN_AGE_PORT | FAST_AGE_STR_DONE;
+ core_writel(priv, reg, CORE_FAST_AGE_CTRL);
+
+ do {
+ reg = core_readl(priv, CORE_FAST_AGE_CTRL);
+ if (!(reg & FAST_AGE_STR_DONE))
+ break;
+
+ cpu_relax();
+ } while (timeout--);
+
+ if (!timeout)
+ return -ETIMEDOUT;
+
+ return 0;
+}
+
+static int bcm_sf2_sw_br_join(struct dsa_switch *ds, int port,
+ u32 br_port_mask)
+{
+ struct bcm_sf2_priv *priv = ds_to_priv(ds);
+ unsigned int i;
+ u32 reg, p_ctl;
+
+ p_ctl = core_readl(priv, CORE_PORT_VLAN_CTL_PORT(port));
+
+ for (i = 0; i < priv->hw_params.num_ports; i++) {
+ if (!((1 << i) & br_port_mask))
+ continue;
+
+ /* Add this local port to the remote port VLAN control
+ * membership and update the remote port bitmask
+ */
+ reg = core_readl(priv, CORE_PORT_VLAN_CTL_PORT(i));
+ reg |= 1 << port;
+ core_writel(priv, reg, CORE_PORT_VLAN_CTL_PORT(i));
+ priv->port_sts[i].vlan_ctl_mask = reg;
+
+ p_ctl |= 1 << i;
+ }
+
+ /* Configure the local port VLAN control membership to include
+ * remote ports and update the local port bitmask
+ */
+ core_writel(priv, p_ctl, CORE_PORT_VLAN_CTL_PORT(port));
+ priv->port_sts[port].vlan_ctl_mask = p_ctl;
+
+ return 0;
+}
+
+static int bcm_sf2_sw_br_leave(struct dsa_switch *ds, int port,
+ u32 br_port_mask)
+{
+ struct bcm_sf2_priv *priv = ds_to_priv(ds);
+ unsigned int i;
+ u32 reg, p_ctl;
+
+ p_ctl = core_readl(priv, CORE_PORT_VLAN_CTL_PORT(port));
+
+ for (i = 0; i < priv->hw_params.num_ports; i++) {
+ /* Don't touch the remaining ports */
+ if (!((1 << i) & br_port_mask))
+ continue;
+
+ reg = core_readl(priv, CORE_PORT_VLAN_CTL_PORT(i));
+ reg &= ~(1 << port);
+ core_writel(priv, reg, CORE_PORT_VLAN_CTL_PORT(i));
+ priv->port_sts[port].vlan_ctl_mask = reg;
+
+ /* Prevent self removal to preserve isolation */
+ if (port != i)
+ p_ctl &= ~(1 << i);
+ }
+
+ core_writel(priv, p_ctl, CORE_PORT_VLAN_CTL_PORT(port));
+ priv->port_sts[port].vlan_ctl_mask = p_ctl;
+
+ return 0;
+}
+
+static int bcm_sf2_sw_br_set_stp_state(struct dsa_switch *ds, int port,
+ u8 state)
+{
+ struct bcm_sf2_priv *priv = ds_to_priv(ds);
+ u8 hw_state, cur_hw_state;
+ int ret = 0;
+ u32 reg;
+
+ reg = core_readl(priv, CORE_G_PCTL_PORT(port));
+ cur_hw_state = reg >> G_MISTP_STATE_SHIFT;
+
+ switch (state) {
+ case BR_STATE_DISABLED:
+ hw_state = G_MISTP_DIS_STATE;
+ break;
+ case BR_STATE_LISTENING:
+ hw_state = G_MISTP_LISTEN_STATE;
+ break;
+ case BR_STATE_LEARNING:
+ hw_state = G_MISTP_LEARN_STATE;
+ break;
+ case BR_STATE_FORWARDING:
+ hw_state = G_MISTP_FWD_STATE;
+ break;
+ case BR_STATE_BLOCKING:
+ hw_state = G_MISTP_BLOCK_STATE;
+ break;
+ default:
+ pr_err("%s: invalid STP state: %d\n", __func__, state);
+ return -EINVAL;
+ }
+
+ /* Fast-age ARL entries if we are moving a port from Learning or
+ * Forwarding state to Disabled, Blocking or Listening state
+ */
+ if (cur_hw_state != hw_state) {
+ if (cur_hw_state & 4 && !(hw_state & 4)) {
+ ret = bcm_sf2_sw_fast_age_port(ds, port);
+ if (ret) {
+ pr_err("%s: fast-ageing failed\n", __func__);
+ return ret;
+ }
+ }
+ }
+
+ reg = core_readl(priv, CORE_G_PCTL_PORT(port));
+ reg &= ~(G_MISTP_STATE_MASK << G_MISTP_STATE_SHIFT);
+ reg |= hw_state;
+ core_writel(priv, reg, CORE_G_PCTL_PORT(port));
+
+ return 0;
+}
+
+static irqreturn_t bcm_sf2_switch_0_isr(int irq, void *dev_id)
+{
+ struct bcm_sf2_priv *priv = dev_id;
+
+ priv->irq0_stat = intrl2_0_readl(priv, INTRL2_CPU_STATUS) &
+ ~priv->irq0_mask;
+ intrl2_0_writel(priv, priv->irq0_stat, INTRL2_CPU_CLEAR);
+
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t bcm_sf2_switch_1_isr(int irq, void *dev_id)
+{
+ struct bcm_sf2_priv *priv = dev_id;
+
+ priv->irq1_stat = intrl2_1_readl(priv, INTRL2_CPU_STATUS) &
+ ~priv->irq1_mask;
+ intrl2_1_writel(priv, priv->irq1_stat, INTRL2_CPU_CLEAR);
+
+ if (priv->irq1_stat & P_LINK_UP_IRQ(P7_IRQ_OFF))
+ priv->port_sts[7].link = 1;
+ if (priv->irq1_stat & P_LINK_DOWN_IRQ(P7_IRQ_OFF))
+ priv->port_sts[7].link = 0;
+
+ return IRQ_HANDLED;
+}
+
+static int bcm_sf2_sw_rst(struct bcm_sf2_priv *priv)
+{
+ unsigned int timeout = 1000;
+ u32 reg;
+
+ reg = core_readl(priv, CORE_WATCHDOG_CTRL);
+ reg |= SOFTWARE_RESET | EN_CHIP_RST | EN_SW_RESET;
+ core_writel(priv, reg, CORE_WATCHDOG_CTRL);
+
+ do {
+ reg = core_readl(priv, CORE_WATCHDOG_CTRL);
+ if (!(reg & SOFTWARE_RESET))
+ break;
+
+ usleep_range(1000, 2000);
+ } while (timeout-- > 0);
+
+ if (timeout == 0)
+ return -ETIMEDOUT;
+
+ return 0;
+}
+
+static void bcm_sf2_intr_disable(struct bcm_sf2_priv *priv)
+{
+ intrl2_0_writel(priv, 0xffffffff, INTRL2_CPU_MASK_SET);
+ intrl2_0_writel(priv, 0xffffffff, INTRL2_CPU_CLEAR);
+ intrl2_0_writel(priv, 0, INTRL2_CPU_MASK_CLEAR);
+ intrl2_1_writel(priv, 0xffffffff, INTRL2_CPU_MASK_SET);
+ intrl2_1_writel(priv, 0xffffffff, INTRL2_CPU_CLEAR);
+ intrl2_1_writel(priv, 0, INTRL2_CPU_MASK_CLEAR);
+}
+
+static int bcm_sf2_sw_setup(struct dsa_switch *ds)
+{
+ const char *reg_names[BCM_SF2_REGS_NUM] = BCM_SF2_REGS_NAME;
+ struct bcm_sf2_priv *priv = ds_to_priv(ds);
+ struct device_node *dn;
+ void __iomem **base;
+ unsigned int port;
+ unsigned int i;
+ u32 reg, rev;
+ int ret;
+
+ spin_lock_init(&priv->indir_lock);
+ mutex_init(&priv->stats_mutex);
+
+ /* All the interesting properties are at the parent device_node
+ * level
+ */
+ dn = ds->pd->of_node->parent;
+
+ priv->irq0 = irq_of_parse_and_map(dn, 0);
+ priv->irq1 = irq_of_parse_and_map(dn, 1);
+
+ base = &priv->core;
+ for (i = 0; i < BCM_SF2_REGS_NUM; i++) {
+ *base = of_iomap(dn, i);
+ if (*base == NULL) {
+ pr_err("unable to find register: %s\n", reg_names[i]);
+ ret = -ENOMEM;
+ goto out_unmap;
+ }
+ base++;
+ }
+
+ ret = bcm_sf2_sw_rst(priv);
+ if (ret) {
+ pr_err("unable to software reset switch: %d\n", ret);
+ goto out_unmap;
+ }
+
+ /* Disable all interrupts and request them */
+ bcm_sf2_intr_disable(priv);
+
+ ret = request_irq(priv->irq0, bcm_sf2_switch_0_isr, 0,
+ "switch_0", priv);
+ if (ret < 0) {
+ pr_err("failed to request switch_0 IRQ\n");
+ goto out_unmap;
+ }
+
+ ret = request_irq(priv->irq1, bcm_sf2_switch_1_isr, 0,
+ "switch_1", priv);
+ if (ret < 0) {
+ pr_err("failed to request switch_1 IRQ\n");
+ goto out_free_irq0;
+ }
+
+ /* Reset the MIB counters */
+ reg = core_readl(priv, CORE_GMNCFGCFG);
+ reg |= RST_MIB_CNT;
+ core_writel(priv, reg, CORE_GMNCFGCFG);
+ reg &= ~RST_MIB_CNT;
+ core_writel(priv, reg, CORE_GMNCFGCFG);
+
+ /* Get the maximum number of ports for this switch */
+ priv->hw_params.num_ports = core_readl(priv, CORE_IMP0_PRT_ID) + 1;
+ if (priv->hw_params.num_ports > DSA_MAX_PORTS)
+ priv->hw_params.num_ports = DSA_MAX_PORTS;
+
+ /* Assume a single GPHY setup if we can't read that property */
+ if (of_property_read_u32(dn, "brcm,num-gphy",
+ &priv->hw_params.num_gphy))
+ priv->hw_params.num_gphy = 1;
+
+ /* Enable all valid ports and disable those unused */
+ for (port = 0; port < priv->hw_params.num_ports; port++) {
+ /* IMP port receives special treatment */
+ if ((1 << port) & ds->phys_port_mask)
+ bcm_sf2_port_setup(ds, port, NULL);
+ else if (dsa_is_cpu_port(ds, port))
+ bcm_sf2_imp_setup(ds, port);
+ else
+ bcm_sf2_port_disable(ds, port, NULL);
+ }
+
+ /* Include the pseudo-PHY address and the broadcast PHY address to
+ * divert reads towards our workaround
+ */
+ ds->phys_mii_mask |= ((1 << 30) | (1 << 0));
+
+ rev = reg_readl(priv, REG_SWITCH_REVISION);
+ priv->hw_params.top_rev = (rev >> SWITCH_TOP_REV_SHIFT) &
+ SWITCH_TOP_REV_MASK;
+ priv->hw_params.core_rev = (rev & SF2_REV_MASK);
+
+ rev = reg_readl(priv, REG_PHY_REVISION);
+ priv->hw_params.gphy_rev = rev & PHY_REVISION_MASK;
+
+ pr_info("Starfighter 2 top: %x.%02x, core: %x.%02x base: 0x%p, IRQs: %d, %d\n",
+ priv->hw_params.top_rev >> 8, priv->hw_params.top_rev & 0xff,
+ priv->hw_params.core_rev >> 8, priv->hw_params.core_rev & 0xff,
+ priv->core, priv->irq0, priv->irq1);
+
+ return 0;
+
+out_free_irq0:
+ free_irq(priv->irq0, priv);
+out_unmap:
+ base = &priv->core;
+ for (i = 0; i < BCM_SF2_REGS_NUM; i++) {
+ if (*base)
+ iounmap(*base);
+ base++;
+ }
+ return ret;
+}
+
+static int bcm_sf2_sw_set_addr(struct dsa_switch *ds, u8 *addr)
+{
+ return 0;
+}
+
+static u32 bcm_sf2_sw_get_phy_flags(struct dsa_switch *ds, int port)
+{
+ struct bcm_sf2_priv *priv = ds_to_priv(ds);
+
+ /* The BCM7xxx PHY driver expects to find the integrated PHY revision
+ * in bits 15:8 and the patch level in bits 7:0 which is exactly what
+ * the REG_PHY_REVISION register layout is.
+ */
+
+ return priv->hw_params.gphy_rev;
+}
+
+static int bcm_sf2_sw_indir_rw(struct dsa_switch *ds, int op, int addr,
+ int regnum, u16 val)
+{
+ struct bcm_sf2_priv *priv = ds_to_priv(ds);
+ int ret = 0;
+ u32 reg;
+
+ reg = reg_readl(priv, REG_SWITCH_CNTRL);
+ reg |= MDIO_MASTER_SEL;
+ reg_writel(priv, reg, REG_SWITCH_CNTRL);
+
+ /* Page << 8 | offset */
+ reg = 0x70;
+ reg <<= 2;
+ core_writel(priv, addr, reg);
+
+ /* Page << 8 | offset */
+ reg = 0x80 << 8 | regnum << 1;
+ reg <<= 2;
+
+ if (op)
+ ret = core_readl(priv, reg);
+ else
+ core_writel(priv, val, reg);
+
+ reg = reg_readl(priv, REG_SWITCH_CNTRL);
+ reg &= ~MDIO_MASTER_SEL;
+ reg_writel(priv, reg, REG_SWITCH_CNTRL);
+
+ return ret & 0xffff;
+}
+
+static int bcm_sf2_sw_phy_read(struct dsa_switch *ds, int addr, int regnum)
+{
+ /* Intercept reads from the MDIO broadcast address or Broadcom
+ * pseudo-PHY address
+ */
+ switch (addr) {
+ case 0:
+ case 30:
+ return bcm_sf2_sw_indir_rw(ds, 1, addr, regnum, 0);
+ default:
+ return 0xffff;
+ }
+}
+
+static int bcm_sf2_sw_phy_write(struct dsa_switch *ds, int addr, int regnum,
+ u16 val)
+{
+ /* Intercept writes to the MDIO broadcast address or Broadcom
+ * pseudo-PHY address
+ */
+ switch (addr) {
+ case 0:
+ case 30:
+ bcm_sf2_sw_indir_rw(ds, 0, addr, regnum, val);
+ break;
+ }
+
+ return 0;
+}
+
+static void bcm_sf2_sw_adjust_link(struct dsa_switch *ds, int port,
+ struct phy_device *phydev)
+{
+ struct bcm_sf2_priv *priv = ds_to_priv(ds);
+ u32 id_mode_dis = 0, port_mode;
+ const char *str = NULL;
+ u32 reg;
+
+ switch (phydev->interface) {
+ case PHY_INTERFACE_MODE_RGMII:
+ str = "RGMII (no delay)";
+ id_mode_dis = 1;
+ case PHY_INTERFACE_MODE_RGMII_TXID:
+ if (!str)
+ str = "RGMII (TX delay)";
+ port_mode = EXT_GPHY;
+ break;
+ case PHY_INTERFACE_MODE_MII:
+ str = "MII";
+ port_mode = EXT_EPHY;
+ break;
+ case PHY_INTERFACE_MODE_REVMII:
+ str = "Reverse MII";
+ port_mode = EXT_REVMII;
+ break;
+ default:
+ /* All other PHYs: internal and MoCA */
+ goto force_link;
+ }
+
+ /* If the link is down, just disable the interface to conserve power */
+ if (!phydev->link) {
+ reg = reg_readl(priv, REG_RGMII_CNTRL_P(port));
+ reg &= ~RGMII_MODE_EN;
+ reg_writel(priv, reg, REG_RGMII_CNTRL_P(port));
+ goto force_link;
+ }
+
+ /* Clear id_mode_dis bit, and the existing port mode, but
+ * make sure we enable the RGMII block for data to pass
+ */
+ reg = reg_readl(priv, REG_RGMII_CNTRL_P(port));
+ reg &= ~ID_MODE_DIS;
+ reg &= ~(PORT_MODE_MASK << PORT_MODE_SHIFT);
+ reg &= ~(RX_PAUSE_EN | TX_PAUSE_EN);
+
+ reg |= port_mode | RGMII_MODE_EN;
+ if (id_mode_dis)
+ reg |= ID_MODE_DIS;
+
+ if (phydev->pause) {
+ if (phydev->asym_pause)
+ reg |= TX_PAUSE_EN;
+ reg |= RX_PAUSE_EN;
+ }
+
+ reg_writel(priv, reg, REG_RGMII_CNTRL_P(port));
+
+ pr_info("Port %d configured for %s\n", port, str);
+
+force_link:
+ /* Force link settings detected from the PHY */
+ reg = SW_OVERRIDE;
+ switch (phydev->speed) {
+ case SPEED_1000:
+ reg |= SPDSTS_1000 << SPEED_SHIFT;
+ break;
+ case SPEED_100:
+ reg |= SPDSTS_100 << SPEED_SHIFT;
+ break;
+ }
+
+ if (phydev->link)
+ reg |= LINK_STS;
+ if (phydev->duplex == DUPLEX_FULL)
+ reg |= DUPLX_MODE;
+
+ core_writel(priv, reg, CORE_STS_OVERRIDE_GMIIP_PORT(port));
+}
+
+static void bcm_sf2_sw_fixed_link_update(struct dsa_switch *ds, int port,
+ struct fixed_phy_status *status)
+{
+ struct bcm_sf2_priv *priv = ds_to_priv(ds);
+ u32 duplex, pause, speed;
+ u32 reg;
+
+ duplex = core_readl(priv, CORE_DUPSTS);
+ pause = core_readl(priv, CORE_PAUSESTS);
+ speed = core_readl(priv, CORE_SPDSTS);
+
+ speed >>= (port * SPDSTS_SHIFT);
+ speed &= SPDSTS_MASK;
+
+ status->link = 0;
+
+ /* Port 7 is special as we do not get link status from CORE_LNKSTS,
+ * which means that we need to force the link at the port override
+ * level to get the data to flow. We do use what the interrupt handler
+ * did determine before.
+ *
+ * For the other ports, we just force the link status, since this is
+ * a fixed PHY device.
+ */
+ if (port == 7) {
+ status->link = priv->port_sts[port].link;
+ status->duplex = 1;
+ } else {
+ status->link = 1;
+ status->duplex = !!(duplex & (1 << port));
+ }
+
+ reg = core_readl(priv, CORE_STS_OVERRIDE_GMIIP_PORT(port));
+ reg |= SW_OVERRIDE;
+ if (status->link)
+ reg |= LINK_STS;
+ else
+ reg &= ~LINK_STS;
+ core_writel(priv, reg, CORE_STS_OVERRIDE_GMIIP_PORT(port));
+
+ switch (speed) {
+ case SPDSTS_10:
+ status->speed = SPEED_10;
+ break;
+ case SPDSTS_100:
+ status->speed = SPEED_100;
+ break;
+ case SPDSTS_1000:
+ status->speed = SPEED_1000;
+ break;
+ }
+
+ if ((pause & (1 << port)) &&
+ (pause & (1 << (port + PAUSESTS_TX_PAUSE_SHIFT)))) {
+ status->asym_pause = 1;
+ status->pause = 1;
+ }
+
+ if (pause & (1 << port))
+ status->pause = 1;
+}
+
+static int bcm_sf2_sw_suspend(struct dsa_switch *ds)
+{
+ struct bcm_sf2_priv *priv = ds_to_priv(ds);
+ unsigned int port;
+
+ bcm_sf2_intr_disable(priv);
+
+ /* Disable all ports physically present including the IMP
+ * port, the other ones have already been disabled during
+ * bcm_sf2_sw_setup
+ */
+ for (port = 0; port < DSA_MAX_PORTS; port++) {
+ if ((1 << port) & ds->phys_port_mask ||
+ dsa_is_cpu_port(ds, port))
+ bcm_sf2_port_disable(ds, port, NULL);
+ }
+
+ return 0;
+}
+
+static int bcm_sf2_sw_resume(struct dsa_switch *ds)
+{
+ struct bcm_sf2_priv *priv = ds_to_priv(ds);
+ unsigned int port;
+ int ret;
+
+ ret = bcm_sf2_sw_rst(priv);
+ if (ret) {
+ pr_err("%s: failed to software reset switch\n", __func__);
+ return ret;
+ }
+
+ if (priv->hw_params.num_gphy == 1)
+ bcm_sf2_gphy_enable_set(ds, true);
+
+ for (port = 0; port < DSA_MAX_PORTS; port++) {
+ if ((1 << port) & ds->phys_port_mask)
+ bcm_sf2_port_setup(ds, port, NULL);
+ else if (dsa_is_cpu_port(ds, port))
+ bcm_sf2_imp_setup(ds, port);
+ }
+
+ return 0;
+}
+
+static void bcm_sf2_sw_get_wol(struct dsa_switch *ds, int port,
+ struct ethtool_wolinfo *wol)
+{
+ struct net_device *p = ds->dst[ds->index].master_netdev;
+ struct bcm_sf2_priv *priv = ds_to_priv(ds);
+ struct ethtool_wolinfo pwol;
+
+ /* Get the parent device WoL settings */
+ p->ethtool_ops->get_wol(p, &pwol);
+
+ /* Advertise the parent device supported settings */
+ wol->supported = pwol.supported;
+ memset(&wol->sopass, 0, sizeof(wol->sopass));
+
+ if (pwol.wolopts & WAKE_MAGICSECURE)
+ memcpy(&wol->sopass, pwol.sopass, sizeof(wol->sopass));
+
+ if (priv->wol_ports_mask & (1 << port))
+ wol->wolopts = pwol.wolopts;
+ else
+ wol->wolopts = 0;
+}
+
+static int bcm_sf2_sw_set_wol(struct dsa_switch *ds, int port,
+ struct ethtool_wolinfo *wol)
+{
+ struct net_device *p = ds->dst[ds->index].master_netdev;
+ struct bcm_sf2_priv *priv = ds_to_priv(ds);
+ s8 cpu_port = ds->dst[ds->index].cpu_port;
+ struct ethtool_wolinfo pwol;
+
+ p->ethtool_ops->get_wol(p, &pwol);
+ if (wol->wolopts & ~pwol.supported)
+ return -EINVAL;
+
+ if (wol->wolopts)
+ priv->wol_ports_mask |= (1 << port);
+ else
+ priv->wol_ports_mask &= ~(1 << port);
+
+ /* If we have at least one port enabled, make sure the CPU port
+ * is also enabled. If the CPU port is the last one enabled, we disable
+ * it since this configuration does not make sense.
+ */
+ if (priv->wol_ports_mask && priv->wol_ports_mask != (1 << cpu_port))
+ priv->wol_ports_mask |= (1 << cpu_port);
+ else
+ priv->wol_ports_mask &= ~(1 << cpu_port);
+
+ return p->ethtool_ops->set_wol(p, wol);
+}
+
+static struct dsa_switch_driver bcm_sf2_switch_driver = {
+ .tag_protocol = DSA_TAG_PROTO_BRCM,
+ .priv_size = sizeof(struct bcm_sf2_priv),
+ .probe = bcm_sf2_sw_probe,
+ .setup = bcm_sf2_sw_setup,
+ .set_addr = bcm_sf2_sw_set_addr,
+ .get_phy_flags = bcm_sf2_sw_get_phy_flags,
+ .phy_read = bcm_sf2_sw_phy_read,
+ .phy_write = bcm_sf2_sw_phy_write,
+ .get_strings = bcm_sf2_sw_get_strings,
+ .get_ethtool_stats = bcm_sf2_sw_get_ethtool_stats,
+ .get_sset_count = bcm_sf2_sw_get_sset_count,
+ .adjust_link = bcm_sf2_sw_adjust_link,
+ .fixed_link_update = bcm_sf2_sw_fixed_link_update,
+ .suspend = bcm_sf2_sw_suspend,
+ .resume = bcm_sf2_sw_resume,
+ .get_wol = bcm_sf2_sw_get_wol,
+ .set_wol = bcm_sf2_sw_set_wol,
+ .port_enable = bcm_sf2_port_setup,
+ .port_disable = bcm_sf2_port_disable,
+ .get_eee = bcm_sf2_sw_get_eee,
+ .set_eee = bcm_sf2_sw_set_eee,
+ .port_join_bridge = bcm_sf2_sw_br_join,
+ .port_leave_bridge = bcm_sf2_sw_br_leave,
+ .port_stp_update = bcm_sf2_sw_br_set_stp_state,
+};
+
+static int __init bcm_sf2_init(void)
+{
+ register_switch_driver(&bcm_sf2_switch_driver);
+
+ return 0;
+}
+module_init(bcm_sf2_init);
+
+static void __exit bcm_sf2_exit(void)
+{
+ unregister_switch_driver(&bcm_sf2_switch_driver);
+}
+module_exit(bcm_sf2_exit);
+
+MODULE_AUTHOR("Broadcom Corporation");
+MODULE_DESCRIPTION("Driver for Broadcom Starfighter 2 ethernet switch chip");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:brcm-sf2");
diff --git a/kernel/drivers/net/dsa/bcm_sf2.h b/kernel/drivers/net/dsa/bcm_sf2.h
new file mode 100644
index 000000000..22e2ebf31
--- /dev/null
+++ b/kernel/drivers/net/dsa/bcm_sf2.h
@@ -0,0 +1,149 @@
+/*
+ * Broadcom Starfighter2 private context
+ *
+ * Copyright (C) 2014, Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef __BCM_SF2_H
+#define __BCM_SF2_H
+
+#include <linux/platform_device.h>
+#include <linux/kernel.h>
+#include <linux/io.h>
+#include <linux/spinlock.h>
+#include <linux/mutex.h>
+#include <linux/mii.h>
+#include <linux/ethtool.h>
+
+#include <net/dsa.h>
+
+#include "bcm_sf2_regs.h"
+
+struct bcm_sf2_hw_params {
+ u16 top_rev;
+ u16 core_rev;
+ u16 gphy_rev;
+ u32 num_gphy;
+ u8 num_acb_queue;
+ u8 num_rgmii;
+ u8 num_ports;
+ u8 fcb_pause_override:1;
+ u8 acb_packets_inflight:1;
+};
+
+#define BCM_SF2_REGS_NAME {\
+ "core", "reg", "intrl2_0", "intrl2_1", "fcb", "acb" \
+}
+
+#define BCM_SF2_REGS_NUM 6
+
+struct bcm_sf2_port_status {
+ unsigned int link;
+
+ struct ethtool_eee eee;
+
+ u32 vlan_ctl_mask;
+};
+
+struct bcm_sf2_priv {
+ /* Base registers, keep those in order with BCM_SF2_REGS_NAME */
+ void __iomem *core;
+ void __iomem *reg;
+ void __iomem *intrl2_0;
+ void __iomem *intrl2_1;
+ void __iomem *fcb;
+ void __iomem *acb;
+
+ /* spinlock protecting access to the indirect registers */
+ spinlock_t indir_lock;
+
+ int irq0;
+ int irq1;
+ u32 irq0_stat;
+ u32 irq0_mask;
+ u32 irq1_stat;
+ u32 irq1_mask;
+
+ /* Mutex protecting access to the MIB counters */
+ struct mutex stats_mutex;
+
+ struct bcm_sf2_hw_params hw_params;
+
+ struct bcm_sf2_port_status port_sts[DSA_MAX_PORTS];
+
+ /* Mask of ports enabled for Wake-on-LAN */
+ u32 wol_ports_mask;
+};
+
+struct bcm_sf2_hw_stats {
+ const char *string;
+ u16 reg;
+ u8 sizeof_stat;
+};
+
+#define SF2_IO_MACRO(name) \
+static inline u32 name##_readl(struct bcm_sf2_priv *priv, u32 off) \
+{ \
+ return __raw_readl(priv->name + off); \
+} \
+static inline void name##_writel(struct bcm_sf2_priv *priv, \
+ u32 val, u32 off) \
+{ \
+ __raw_writel(val, priv->name + off); \
+} \
+
+/* Accesses to 64-bits register requires us to latch the hi/lo pairs
+ * using the REG_DIR_DATA_{READ,WRITE} ancillary registers. The 'indir_lock'
+ * spinlock is automatically grabbed and released to provide relative
+ * atomiticy with latched reads/writes.
+ */
+#define SF2_IO64_MACRO(name) \
+static inline u64 name##_readq(struct bcm_sf2_priv *priv, u32 off) \
+{ \
+ u32 indir, dir; \
+ spin_lock(&priv->indir_lock); \
+ dir = __raw_readl(priv->name + off); \
+ indir = reg_readl(priv, REG_DIR_DATA_READ); \
+ spin_unlock(&priv->indir_lock); \
+ return (u64)indir << 32 | dir; \
+} \
+static inline void name##_writeq(struct bcm_sf2_priv *priv, u32 off, \
+ u64 val) \
+{ \
+ spin_lock(&priv->indir_lock); \
+ reg_writel(priv, upper_32_bits(val), REG_DIR_DATA_WRITE); \
+ __raw_writel(lower_32_bits(val), priv->name + off); \
+ spin_unlock(&priv->indir_lock); \
+}
+
+#define SWITCH_INTR_L2(which) \
+static inline void intrl2_##which##_mask_clear(struct bcm_sf2_priv *priv, \
+ u32 mask) \
+{ \
+ intrl2_##which##_writel(priv, mask, INTRL2_CPU_MASK_CLEAR); \
+ priv->irq##which##_mask &= ~(mask); \
+} \
+static inline void intrl2_##which##_mask_set(struct bcm_sf2_priv *priv, \
+ u32 mask) \
+{ \
+ intrl2_## which##_writel(priv, mask, INTRL2_CPU_MASK_SET); \
+ priv->irq##which##_mask |= (mask); \
+} \
+
+SF2_IO_MACRO(core);
+SF2_IO_MACRO(reg);
+SF2_IO64_MACRO(core);
+SF2_IO_MACRO(intrl2_0);
+SF2_IO_MACRO(intrl2_1);
+SF2_IO_MACRO(fcb);
+SF2_IO_MACRO(acb);
+
+SWITCH_INTR_L2(0);
+SWITCH_INTR_L2(1);
+
+#endif /* __BCM_SF2_H */
diff --git a/kernel/drivers/net/dsa/bcm_sf2_regs.h b/kernel/drivers/net/dsa/bcm_sf2_regs.h
new file mode 100644
index 000000000..fa4e6e78c
--- /dev/null
+++ b/kernel/drivers/net/dsa/bcm_sf2_regs.h
@@ -0,0 +1,250 @@
+/*
+ * Broadcom Starfighter 2 switch register defines
+ *
+ * Copyright (C) 2014, Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+#ifndef __BCM_SF2_REGS_H
+#define __BCM_SF2_REGS_H
+
+/* Register set relative to 'REG' */
+#define REG_SWITCH_CNTRL 0x00
+#define MDIO_MASTER_SEL (1 << 0)
+
+#define REG_SWITCH_STATUS 0x04
+#define REG_DIR_DATA_WRITE 0x08
+#define REG_DIR_DATA_READ 0x0C
+
+#define REG_SWITCH_REVISION 0x18
+#define SF2_REV_MASK 0xffff
+#define SWITCH_TOP_REV_SHIFT 16
+#define SWITCH_TOP_REV_MASK 0xffff
+
+#define REG_PHY_REVISION 0x1C
+#define PHY_REVISION_MASK 0xffff
+
+#define REG_SPHY_CNTRL 0x2C
+#define IDDQ_BIAS (1 << 0)
+#define EXT_PWR_DOWN (1 << 1)
+#define FORCE_DLL_EN (1 << 2)
+#define IDDQ_GLOBAL_PWR (1 << 3)
+#define CK25_DIS (1 << 4)
+#define PHY_RESET (1 << 5)
+#define PHY_PHYAD_SHIFT 8
+#define PHY_PHYAD_MASK 0x1F
+
+#define REG_RGMII_0_BASE 0x34
+#define REG_RGMII_CNTRL 0x00
+#define REG_RGMII_IB_STATUS 0x04
+#define REG_RGMII_RX_CLOCK_DELAY_CNTRL 0x08
+#define REG_RGMII_CNTRL_SIZE 0x0C
+#define REG_RGMII_CNTRL_P(x) (REG_RGMII_0_BASE + \
+ ((x) * REG_RGMII_CNTRL_SIZE))
+/* Relative to REG_RGMII_CNTRL */
+#define RGMII_MODE_EN (1 << 0)
+#define ID_MODE_DIS (1 << 1)
+#define PORT_MODE_SHIFT 2
+#define INT_EPHY (0 << PORT_MODE_SHIFT)
+#define INT_GPHY (1 << PORT_MODE_SHIFT)
+#define EXT_EPHY (2 << PORT_MODE_SHIFT)
+#define EXT_GPHY (3 << PORT_MODE_SHIFT)
+#define EXT_REVMII (4 << PORT_MODE_SHIFT)
+#define PORT_MODE_MASK 0x7
+#define RVMII_REF_SEL (1 << 5)
+#define RX_PAUSE_EN (1 << 6)
+#define TX_PAUSE_EN (1 << 7)
+#define TX_CLK_STOP_EN (1 << 8)
+#define LPI_COUNT_SHIFT 9
+#define LPI_COUNT_MASK 0x3F
+
+#define REG_LED_CNTRL_BASE 0x90
+#define REG_LED_CNTRL(x) (REG_LED_CNTRL_BASE + (x) * 4)
+#define SPDLNK_SRC_SEL (1 << 24)
+
+/* Register set relative to 'INTRL2_0' and 'INTRL2_1' */
+#define INTRL2_CPU_STATUS 0x00
+#define INTRL2_CPU_SET 0x04
+#define INTRL2_CPU_CLEAR 0x08
+#define INTRL2_CPU_MASK_STATUS 0x0c
+#define INTRL2_CPU_MASK_SET 0x10
+#define INTRL2_CPU_MASK_CLEAR 0x14
+
+/* Shared INTRL2_0 and INTRL2_ interrupt sources macros */
+#define P_LINK_UP_IRQ(x) (1 << (0 + (x)))
+#define P_LINK_DOWN_IRQ(x) (1 << (1 + (x)))
+#define P_ENERGY_ON_IRQ(x) (1 << (2 + (x)))
+#define P_ENERGY_OFF_IRQ(x) (1 << (3 + (x)))
+#define P_GPHY_IRQ(x) (1 << (4 + (x)))
+#define P_NUM_IRQ 5
+#define P_IRQ_MASK(x) (P_LINK_UP_IRQ((x)) | \
+ P_LINK_DOWN_IRQ((x)) | \
+ P_ENERGY_ON_IRQ((x)) | \
+ P_ENERGY_OFF_IRQ((x)) | \
+ P_GPHY_IRQ((x)))
+
+/* INTRL2_0 interrupt sources */
+#define P0_IRQ_OFF 0
+#define MEM_DOUBLE_IRQ (1 << 5)
+#define EEE_LPI_IRQ (1 << 6)
+#define P5_CPU_WAKE_IRQ (1 << 7)
+#define P8_CPU_WAKE_IRQ (1 << 8)
+#define P7_CPU_WAKE_IRQ (1 << 9)
+#define IEEE1588_IRQ (1 << 10)
+#define MDIO_ERR_IRQ (1 << 11)
+#define MDIO_DONE_IRQ (1 << 12)
+#define GISB_ERR_IRQ (1 << 13)
+#define UBUS_ERR_IRQ (1 << 14)
+#define FAILOVER_ON_IRQ (1 << 15)
+#define FAILOVER_OFF_IRQ (1 << 16)
+#define TCAM_SOFT_ERR_IRQ (1 << 17)
+
+/* INTRL2_1 interrupt sources */
+#define P7_IRQ_OFF 0
+#define P_IRQ_OFF(x) ((6 - (x)) * P_NUM_IRQ)
+
+/* Register set relative to 'CORE' */
+#define CORE_G_PCTL_PORT0 0x00000
+#define CORE_G_PCTL_PORT(x) (CORE_G_PCTL_PORT0 + (x * 0x4))
+#define CORE_IMP_CTL 0x00020
+#define RX_DIS (1 << 0)
+#define TX_DIS (1 << 1)
+#define RX_BCST_EN (1 << 2)
+#define RX_MCST_EN (1 << 3)
+#define RX_UCST_EN (1 << 4)
+#define G_MISTP_STATE_SHIFT 5
+#define G_MISTP_NO_STP (0 << G_MISTP_STATE_SHIFT)
+#define G_MISTP_DIS_STATE (1 << G_MISTP_STATE_SHIFT)
+#define G_MISTP_BLOCK_STATE (2 << G_MISTP_STATE_SHIFT)
+#define G_MISTP_LISTEN_STATE (3 << G_MISTP_STATE_SHIFT)
+#define G_MISTP_LEARN_STATE (4 << G_MISTP_STATE_SHIFT)
+#define G_MISTP_FWD_STATE (5 << G_MISTP_STATE_SHIFT)
+#define G_MISTP_STATE_MASK 0x7
+
+#define CORE_SWMODE 0x0002c
+#define SW_FWDG_MODE (1 << 0)
+#define SW_FWDG_EN (1 << 1)
+#define RTRY_LMT_DIS (1 << 2)
+
+#define CORE_STS_OVERRIDE_IMP 0x00038
+#define GMII_SPEED_UP_2G (1 << 6)
+#define MII_SW_OR (1 << 7)
+
+#define CORE_NEW_CTRL 0x00084
+#define IP_MC (1 << 0)
+#define OUTRANGEERR_DISCARD (1 << 1)
+#define INRANGEERR_DISCARD (1 << 2)
+#define CABLE_DIAG_LEN (1 << 3)
+#define OVERRIDE_AUTO_PD_WAR (1 << 4)
+#define EN_AUTO_PD_WAR (1 << 5)
+#define UC_FWD_EN (1 << 6)
+#define MC_FWD_EN (1 << 7)
+
+#define CORE_SWITCH_CTRL 0x00088
+#define MII_DUMB_FWDG_EN (1 << 6)
+
+#define CORE_SFT_LRN_CTRL 0x000f8
+#define SW_LEARN_CNTL(x) (1 << (x))
+
+#define CORE_STS_OVERRIDE_GMIIP_PORT(x) (0x160 + (x) * 4)
+#define LINK_STS (1 << 0)
+#define DUPLX_MODE (1 << 1)
+#define SPEED_SHIFT 2
+#define SPEED_MASK 0x3
+#define RXFLOW_CNTL (1 << 4)
+#define TXFLOW_CNTL (1 << 5)
+#define SW_OVERRIDE (1 << 6)
+
+#define CORE_WATCHDOG_CTRL 0x001e4
+#define SOFTWARE_RESET (1 << 7)
+#define EN_CHIP_RST (1 << 6)
+#define EN_SW_RESET (1 << 4)
+
+#define CORE_FAST_AGE_CTRL 0x00220
+#define EN_FAST_AGE_STATIC (1 << 0)
+#define EN_AGE_DYNAMIC (1 << 1)
+#define EN_AGE_PORT (1 << 2)
+#define EN_AGE_VLAN (1 << 3)
+#define EN_AGE_SPT (1 << 4)
+#define EN_AGE_MCAST (1 << 5)
+#define FAST_AGE_STR_DONE (1 << 7)
+
+#define CORE_FAST_AGE_PORT 0x00224
+#define AGE_PORT_MASK 0xf
+
+#define CORE_FAST_AGE_VID 0x00228
+#define AGE_VID_MASK 0x3fff
+
+#define CORE_LNKSTS 0x00400
+#define LNK_STS_MASK 0x1ff
+
+#define CORE_SPDSTS 0x00410
+#define SPDSTS_10 0
+#define SPDSTS_100 1
+#define SPDSTS_1000 2
+#define SPDSTS_SHIFT 2
+#define SPDSTS_MASK 0x3
+
+#define CORE_DUPSTS 0x00420
+#define CORE_DUPSTS_MASK 0x1ff
+
+#define CORE_PAUSESTS 0x00428
+#define PAUSESTS_TX_PAUSE_SHIFT 9
+
+#define CORE_GMNCFGCFG 0x0800
+#define RST_MIB_CNT (1 << 0)
+#define RXBPDU_EN (1 << 1)
+
+#define CORE_IMP0_PRT_ID 0x0804
+
+#define CORE_BRCM_HDR_CTRL 0x0080c
+#define BRCM_HDR_EN_P8 (1 << 0)
+#define BRCM_HDR_EN_P5 (1 << 1)
+#define BRCM_HDR_EN_P7 (1 << 2)
+
+#define CORE_BRCM_HDR_CTRL2 0x0828
+
+#define CORE_HL_PRTC_CTRL 0x0940
+#define ARP_EN (1 << 0)
+#define RARP_EN (1 << 1)
+#define DHCP_EN (1 << 2)
+#define ICMPV4_EN (1 << 3)
+#define ICMPV6_EN (1 << 4)
+#define ICMPV6_FWD_MODE (1 << 5)
+#define IGMP_DIP_EN (1 << 8)
+#define IGMP_RPTLVE_EN (1 << 9)
+#define IGMP_RTPLVE_FWD_MODE (1 << 10)
+#define IGMP_QRY_EN (1 << 11)
+#define IGMP_QRY_FWD_MODE (1 << 12)
+#define IGMP_UKN_EN (1 << 13)
+#define IGMP_UKN_FWD_MODE (1 << 14)
+#define MLD_RPTDONE_EN (1 << 15)
+#define MLD_RPTDONE_FWD_MODE (1 << 16)
+#define MLD_QRY_EN (1 << 17)
+#define MLD_QRY_FWD_MODE (1 << 18)
+
+#define CORE_RST_MIB_CNT_EN 0x0950
+
+#define CORE_BRCM_HDR_RX_DIS 0x0980
+#define CORE_BRCM_HDR_TX_DIS 0x0988
+
+#define CORE_MEM_PSM_VDD_CTRL 0x2380
+#define P_TXQ_PSM_VDD_SHIFT 2
+#define P_TXQ_PSM_VDD_MASK 0x3
+#define P_TXQ_PSM_VDD(x) (P_TXQ_PSM_VDD_MASK << \
+ ((x) * P_TXQ_PSM_VDD_SHIFT))
+
+#define CORE_P0_MIB_OFFSET 0x8000
+#define P_MIB_SIZE 0x400
+#define CORE_P_MIB_OFFSET(x) (CORE_P0_MIB_OFFSET + (x) * P_MIB_SIZE)
+
+#define CORE_PORT_VLAN_CTL_PORT(x) (0xc400 + ((x) * 0x8))
+#define PORT_VLAN_CTRL_MASK 0x1ff
+
+#define CORE_EEE_EN_CTRL 0x24800
+#define CORE_EEE_LPI_INDICATE 0x24810
+
+#endif /* __BCM_SF2_REGS_H */
diff --git a/kernel/drivers/net/dsa/mv88e6060.c b/kernel/drivers/net/dsa/mv88e6060.c
new file mode 100644
index 000000000..c29aebe1e
--- /dev/null
+++ b/kernel/drivers/net/dsa/mv88e6060.c
@@ -0,0 +1,302 @@
+/*
+ * net/dsa/mv88e6060.c - Driver for Marvell 88e6060 switch chips
+ * Copyright (c) 2008-2009 Marvell Semiconductor
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/delay.h>
+#include <linux/jiffies.h>
+#include <linux/list.h>
+#include <linux/module.h>
+#include <linux/netdevice.h>
+#include <linux/phy.h>
+#include <net/dsa.h>
+
+#define REG_PORT(p) (8 + (p))
+#define REG_GLOBAL 0x0f
+
+static int reg_read(struct dsa_switch *ds, int addr, int reg)
+{
+ struct mii_bus *bus = dsa_host_dev_to_mii_bus(ds->master_dev);
+
+ if (bus == NULL)
+ return -EINVAL;
+
+ return mdiobus_read(bus, ds->pd->sw_addr + addr, reg);
+}
+
+#define REG_READ(addr, reg) \
+ ({ \
+ int __ret; \
+ \
+ __ret = reg_read(ds, addr, reg); \
+ if (__ret < 0) \
+ return __ret; \
+ __ret; \
+ })
+
+
+static int reg_write(struct dsa_switch *ds, int addr, int reg, u16 val)
+{
+ struct mii_bus *bus = dsa_host_dev_to_mii_bus(ds->master_dev);
+
+ if (bus == NULL)
+ return -EINVAL;
+
+ return mdiobus_write(bus, ds->pd->sw_addr + addr, reg, val);
+}
+
+#define REG_WRITE(addr, reg, val) \
+ ({ \
+ int __ret; \
+ \
+ __ret = reg_write(ds, addr, reg, val); \
+ if (__ret < 0) \
+ return __ret; \
+ })
+
+static char *mv88e6060_probe(struct device *host_dev, int sw_addr)
+{
+ struct mii_bus *bus = dsa_host_dev_to_mii_bus(host_dev);
+ int ret;
+
+ if (bus == NULL)
+ return NULL;
+
+ ret = mdiobus_read(bus, sw_addr + REG_PORT(0), 0x03);
+ if (ret >= 0) {
+ if (ret == 0x0600)
+ return "Marvell 88E6060 (A0)";
+ if (ret == 0x0601 || ret == 0x0602)
+ return "Marvell 88E6060 (B0)";
+ if ((ret & 0xfff0) == 0x0600)
+ return "Marvell 88E6060";
+ }
+
+ return NULL;
+}
+
+static int mv88e6060_switch_reset(struct dsa_switch *ds)
+{
+ int i;
+ int ret;
+ unsigned long timeout;
+
+ /* Set all ports to the disabled state. */
+ for (i = 0; i < 6; i++) {
+ ret = REG_READ(REG_PORT(i), 0x04);
+ REG_WRITE(REG_PORT(i), 0x04, ret & 0xfffc);
+ }
+
+ /* Wait for transmit queues to drain. */
+ usleep_range(2000, 4000);
+
+ /* Reset the switch. */
+ REG_WRITE(REG_GLOBAL, 0x0a, 0xa130);
+
+ /* Wait up to one second for reset to complete. */
+ timeout = jiffies + 1 * HZ;
+ while (time_before(jiffies, timeout)) {
+ ret = REG_READ(REG_GLOBAL, 0x00);
+ if ((ret & 0x8000) == 0x0000)
+ break;
+
+ usleep_range(1000, 2000);
+ }
+ if (time_after(jiffies, timeout))
+ return -ETIMEDOUT;
+
+ return 0;
+}
+
+static int mv88e6060_setup_global(struct dsa_switch *ds)
+{
+ /* Disable discarding of frames with excessive collisions,
+ * set the maximum frame size to 1536 bytes, and mask all
+ * interrupt sources.
+ */
+ REG_WRITE(REG_GLOBAL, 0x04, 0x0800);
+
+ /* Enable automatic address learning, set the address
+ * database size to 1024 entries, and set the default aging
+ * time to 5 minutes.
+ */
+ REG_WRITE(REG_GLOBAL, 0x0a, 0x2130);
+
+ return 0;
+}
+
+static int mv88e6060_setup_port(struct dsa_switch *ds, int p)
+{
+ int addr = REG_PORT(p);
+
+ /* Do not force flow control, disable Ingress and Egress
+ * Header tagging, disable VLAN tunneling, and set the port
+ * state to Forwarding. Additionally, if this is the CPU
+ * port, enable Ingress and Egress Trailer tagging mode.
+ */
+ REG_WRITE(addr, 0x04, dsa_is_cpu_port(ds, p) ? 0x4103 : 0x0003);
+
+ /* Port based VLAN map: give each port its own address
+ * database, allow the CPU port to talk to each of the 'real'
+ * ports, and allow each of the 'real' ports to only talk to
+ * the CPU port.
+ */
+ REG_WRITE(addr, 0x06,
+ ((p & 0xf) << 12) |
+ (dsa_is_cpu_port(ds, p) ?
+ ds->phys_port_mask :
+ (1 << ds->dst->cpu_port)));
+
+ /* Port Association Vector: when learning source addresses
+ * of packets, add the address to the address database using
+ * a port bitmap that has only the bit for this port set and
+ * the other bits clear.
+ */
+ REG_WRITE(addr, 0x0b, 1 << p);
+
+ return 0;
+}
+
+static int mv88e6060_setup(struct dsa_switch *ds)
+{
+ int i;
+ int ret;
+
+ ret = mv88e6060_switch_reset(ds);
+ if (ret < 0)
+ return ret;
+
+ /* @@@ initialise atu */
+
+ ret = mv88e6060_setup_global(ds);
+ if (ret < 0)
+ return ret;
+
+ for (i = 0; i < 6; i++) {
+ ret = mv88e6060_setup_port(ds, i);
+ if (ret < 0)
+ return ret;
+ }
+
+ return 0;
+}
+
+static int mv88e6060_set_addr(struct dsa_switch *ds, u8 *addr)
+{
+ REG_WRITE(REG_GLOBAL, 0x01, (addr[0] << 8) | addr[1]);
+ REG_WRITE(REG_GLOBAL, 0x02, (addr[2] << 8) | addr[3]);
+ REG_WRITE(REG_GLOBAL, 0x03, (addr[4] << 8) | addr[5]);
+
+ return 0;
+}
+
+static int mv88e6060_port_to_phy_addr(int port)
+{
+ if (port >= 0 && port <= 5)
+ return port;
+ return -1;
+}
+
+static int mv88e6060_phy_read(struct dsa_switch *ds, int port, int regnum)
+{
+ int addr;
+
+ addr = mv88e6060_port_to_phy_addr(port);
+ if (addr == -1)
+ return 0xffff;
+
+ return reg_read(ds, addr, regnum);
+}
+
+static int
+mv88e6060_phy_write(struct dsa_switch *ds, int port, int regnum, u16 val)
+{
+ int addr;
+
+ addr = mv88e6060_port_to_phy_addr(port);
+ if (addr == -1)
+ return 0xffff;
+
+ return reg_write(ds, addr, regnum, val);
+}
+
+static void mv88e6060_poll_link(struct dsa_switch *ds)
+{
+ int i;
+
+ for (i = 0; i < DSA_MAX_PORTS; i++) {
+ struct net_device *dev;
+ int uninitialized_var(port_status);
+ int link;
+ int speed;
+ int duplex;
+ int fc;
+
+ dev = ds->ports[i];
+ if (dev == NULL)
+ continue;
+
+ link = 0;
+ if (dev->flags & IFF_UP) {
+ port_status = reg_read(ds, REG_PORT(i), 0x00);
+ if (port_status < 0)
+ continue;
+
+ link = !!(port_status & 0x1000);
+ }
+
+ if (!link) {
+ if (netif_carrier_ok(dev)) {
+ netdev_info(dev, "link down\n");
+ netif_carrier_off(dev);
+ }
+ continue;
+ }
+
+ speed = (port_status & 0x0100) ? 100 : 10;
+ duplex = (port_status & 0x0200) ? 1 : 0;
+ fc = ((port_status & 0xc000) == 0xc000) ? 1 : 0;
+
+ if (!netif_carrier_ok(dev)) {
+ netdev_info(dev,
+ "link up, %d Mb/s, %s duplex, flow control %sabled\n",
+ speed,
+ duplex ? "full" : "half",
+ fc ? "en" : "dis");
+ netif_carrier_on(dev);
+ }
+ }
+}
+
+static struct dsa_switch_driver mv88e6060_switch_driver = {
+ .tag_protocol = DSA_TAG_PROTO_TRAILER,
+ .probe = mv88e6060_probe,
+ .setup = mv88e6060_setup,
+ .set_addr = mv88e6060_set_addr,
+ .phy_read = mv88e6060_phy_read,
+ .phy_write = mv88e6060_phy_write,
+ .poll_link = mv88e6060_poll_link,
+};
+
+static int __init mv88e6060_init(void)
+{
+ register_switch_driver(&mv88e6060_switch_driver);
+ return 0;
+}
+module_init(mv88e6060_init);
+
+static void __exit mv88e6060_cleanup(void)
+{
+ unregister_switch_driver(&mv88e6060_switch_driver);
+}
+module_exit(mv88e6060_cleanup);
+
+MODULE_AUTHOR("Lennert Buytenhek <buytenh@wantstofly.org>");
+MODULE_DESCRIPTION("Driver for Marvell 88E6060 ethernet switch chip");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:mv88e6060");
diff --git a/kernel/drivers/net/dsa/mv88e6123_61_65.c b/kernel/drivers/net/dsa/mv88e6123_61_65.c
new file mode 100644
index 000000000..b4af6d5af
--- /dev/null
+++ b/kernel/drivers/net/dsa/mv88e6123_61_65.c
@@ -0,0 +1,301 @@
+/*
+ * net/dsa/mv88e6123_61_65.c - Marvell 88e6123/6161/6165 switch chip support
+ * Copyright (c) 2008-2009 Marvell Semiconductor
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/delay.h>
+#include <linux/jiffies.h>
+#include <linux/list.h>
+#include <linux/module.h>
+#include <linux/netdevice.h>
+#include <linux/phy.h>
+#include <net/dsa.h>
+#include "mv88e6xxx.h"
+
+static char *mv88e6123_61_65_probe(struct device *host_dev, int sw_addr)
+{
+ struct mii_bus *bus = dsa_host_dev_to_mii_bus(host_dev);
+ int ret;
+
+ if (bus == NULL)
+ return NULL;
+
+ ret = __mv88e6xxx_reg_read(bus, sw_addr, REG_PORT(0), PORT_SWITCH_ID);
+ if (ret >= 0) {
+ if (ret == PORT_SWITCH_ID_6123_A1)
+ return "Marvell 88E6123 (A1)";
+ if (ret == PORT_SWITCH_ID_6123_A2)
+ return "Marvell 88E6123 (A2)";
+ if ((ret & 0xfff0) == PORT_SWITCH_ID_6123)
+ return "Marvell 88E6123";
+
+ if (ret == PORT_SWITCH_ID_6161_A1)
+ return "Marvell 88E6161 (A1)";
+ if (ret == PORT_SWITCH_ID_6161_A2)
+ return "Marvell 88E6161 (A2)";
+ if ((ret & 0xfff0) == PORT_SWITCH_ID_6161)
+ return "Marvell 88E6161";
+
+ if (ret == PORT_SWITCH_ID_6165_A1)
+ return "Marvell 88E6165 (A1)";
+ if (ret == PORT_SWITCH_ID_6165_A2)
+ return "Marvell 88e6165 (A2)";
+ if ((ret & 0xfff0) == PORT_SWITCH_ID_6165)
+ return "Marvell 88E6165";
+ }
+
+ return NULL;
+}
+
+static int mv88e6123_61_65_setup_global(struct dsa_switch *ds)
+{
+ int ret;
+ int i;
+
+ /* Disable the PHY polling unit (since there won't be any
+ * external PHYs to poll), don't discard packets with
+ * excessive collisions, and mask all interrupt sources.
+ */
+ REG_WRITE(REG_GLOBAL, 0x04, 0x0000);
+
+ /* Set the default address aging time to 5 minutes, and
+ * enable address learn messages to be sent to all message
+ * ports.
+ */
+ REG_WRITE(REG_GLOBAL, 0x0a, 0x0148);
+
+ /* Configure the priority mapping registers. */
+ ret = mv88e6xxx_config_prio(ds);
+ if (ret < 0)
+ return ret;
+
+ /* Configure the upstream port, and configure the upstream
+ * port as the port to which ingress and egress monitor frames
+ * are to be sent.
+ */
+ REG_WRITE(REG_GLOBAL, 0x1a, (dsa_upstream_port(ds) * 0x1110));
+
+ /* Disable remote management for now, and set the switch's
+ * DSA device number.
+ */
+ REG_WRITE(REG_GLOBAL, 0x1c, ds->index & 0x1f);
+
+ /* Send all frames with destination addresses matching
+ * 01:80:c2:00:00:2x to the CPU port.
+ */
+ REG_WRITE(REG_GLOBAL2, 0x02, 0xffff);
+
+ /* Send all frames with destination addresses matching
+ * 01:80:c2:00:00:0x to the CPU port.
+ */
+ REG_WRITE(REG_GLOBAL2, 0x03, 0xffff);
+
+ /* Disable the loopback filter, disable flow control
+ * messages, disable flood broadcast override, disable
+ * removing of provider tags, disable ATU age violation
+ * interrupts, disable tag flow control, force flow
+ * control priority to the highest, and send all special
+ * multicast frames to the CPU at the highest priority.
+ */
+ REG_WRITE(REG_GLOBAL2, 0x05, 0x00ff);
+
+ /* Program the DSA routing table. */
+ for (i = 0; i < 32; i++) {
+ int nexthop;
+
+ nexthop = 0x1f;
+ if (i != ds->index && i < ds->dst->pd->nr_chips)
+ nexthop = ds->pd->rtable[i] & 0x1f;
+
+ REG_WRITE(REG_GLOBAL2, 0x06, 0x8000 | (i << 8) | nexthop);
+ }
+
+ /* Clear all trunk masks. */
+ for (i = 0; i < 8; i++)
+ REG_WRITE(REG_GLOBAL2, 0x07, 0x8000 | (i << 12) | 0xff);
+
+ /* Clear all trunk mappings. */
+ for (i = 0; i < 16; i++)
+ REG_WRITE(REG_GLOBAL2, 0x08, 0x8000 | (i << 11));
+
+ /* Disable ingress rate limiting by resetting all ingress
+ * rate limit registers to their initial state.
+ */
+ for (i = 0; i < 6; i++)
+ REG_WRITE(REG_GLOBAL2, 0x09, 0x9000 | (i << 8));
+
+ /* Initialise cross-chip port VLAN table to reset defaults. */
+ REG_WRITE(REG_GLOBAL2, 0x0b, 0x9000);
+
+ /* Clear the priority override table. */
+ for (i = 0; i < 16; i++)
+ REG_WRITE(REG_GLOBAL2, 0x0f, 0x8000 | (i << 8));
+
+ /* @@@ initialise AVB (22/23) watchdog (27) sdet (29) registers */
+
+ return 0;
+}
+
+static int mv88e6123_61_65_setup_port(struct dsa_switch *ds, int p)
+{
+ int addr = REG_PORT(p);
+ u16 val;
+
+ /* MAC Forcing register: don't force link, speed, duplex
+ * or flow control state to any particular values on physical
+ * ports, but force the CPU port and all DSA ports to 1000 Mb/s
+ * full duplex.
+ */
+ if (dsa_is_cpu_port(ds, p) || ds->dsa_port_mask & (1 << p))
+ REG_WRITE(addr, 0x01, 0x003e);
+ else
+ REG_WRITE(addr, 0x01, 0x0003);
+
+ /* Do not limit the period of time that this port can be
+ * paused for by the remote end or the period of time that
+ * this port can pause the remote end.
+ */
+ REG_WRITE(addr, 0x02, 0x0000);
+
+ /* Port Control: disable Drop-on-Unlock, disable Drop-on-Lock,
+ * disable Header mode, enable IGMP/MLD snooping, disable VLAN
+ * tunneling, determine priority by looking at 802.1p and IP
+ * priority fields (IP prio has precedence), and set STP state
+ * to Forwarding.
+ *
+ * If this is the CPU link, use DSA or EDSA tagging depending
+ * on which tagging mode was configured.
+ *
+ * If this is a link to another switch, use DSA tagging mode.
+ *
+ * If this is the upstream port for this switch, enable
+ * forwarding of unknown unicasts and multicasts.
+ */
+ val = 0x0433;
+ if (dsa_is_cpu_port(ds, p)) {
+ if (ds->dst->tag_protocol == DSA_TAG_PROTO_EDSA)
+ val |= 0x3300;
+ else
+ val |= 0x0100;
+ }
+ if (ds->dsa_port_mask & (1 << p))
+ val |= 0x0100;
+ if (p == dsa_upstream_port(ds))
+ val |= 0x000c;
+ REG_WRITE(addr, 0x04, val);
+
+ /* Port Control 2: don't force a good FCS, set the maximum
+ * frame size to 10240 bytes, don't let the switch add or
+ * strip 802.1q tags, don't discard tagged or untagged frames
+ * on this port, do a destination address lookup on all
+ * received packets as usual, disable ARP mirroring and don't
+ * send a copy of all transmitted/received frames on this port
+ * to the CPU.
+ */
+ REG_WRITE(addr, 0x08, 0x2080);
+
+ /* Egress rate control: disable egress rate control. */
+ REG_WRITE(addr, 0x09, 0x0001);
+
+ /* Egress rate control 2: disable egress rate control. */
+ REG_WRITE(addr, 0x0a, 0x0000);
+
+ /* Port Association Vector: when learning source addresses
+ * of packets, add the address to the address database using
+ * a port bitmap that has only the bit for this port set and
+ * the other bits clear.
+ */
+ REG_WRITE(addr, 0x0b, 1 << p);
+
+ /* Port ATU control: disable limiting the number of address
+ * database entries that this port is allowed to use.
+ */
+ REG_WRITE(addr, 0x0c, 0x0000);
+
+ /* Priority Override: disable DA, SA and VTU priority override. */
+ REG_WRITE(addr, 0x0d, 0x0000);
+
+ /* Port Ethertype: use the Ethertype DSA Ethertype value. */
+ REG_WRITE(addr, 0x0f, ETH_P_EDSA);
+
+ /* Tag Remap: use an identity 802.1p prio -> switch prio
+ * mapping.
+ */
+ REG_WRITE(addr, 0x18, 0x3210);
+
+ /* Tag Remap 2: use an identity 802.1p prio -> switch prio
+ * mapping.
+ */
+ REG_WRITE(addr, 0x19, 0x7654);
+
+ return mv88e6xxx_setup_port_common(ds, p);
+}
+
+static int mv88e6123_61_65_setup(struct dsa_switch *ds)
+{
+ struct mv88e6xxx_priv_state *ps = ds_to_priv(ds);
+ int i;
+ int ret;
+
+ ret = mv88e6xxx_setup_common(ds);
+ if (ret < 0)
+ return ret;
+
+ switch (ps->id) {
+ case PORT_SWITCH_ID_6123:
+ ps->num_ports = 3;
+ break;
+ case PORT_SWITCH_ID_6161:
+ case PORT_SWITCH_ID_6165:
+ ps->num_ports = 6;
+ break;
+ default:
+ return -ENODEV;
+ }
+
+ ret = mv88e6xxx_switch_reset(ds, false);
+ if (ret < 0)
+ return ret;
+
+ /* @@@ initialise vtu and atu */
+
+ ret = mv88e6123_61_65_setup_global(ds);
+ if (ret < 0)
+ return ret;
+
+ for (i = 0; i < ps->num_ports; i++) {
+ ret = mv88e6123_61_65_setup_port(ds, i);
+ if (ret < 0)
+ return ret;
+ }
+
+ return 0;
+}
+
+struct dsa_switch_driver mv88e6123_61_65_switch_driver = {
+ .tag_protocol = DSA_TAG_PROTO_EDSA,
+ .priv_size = sizeof(struct mv88e6xxx_priv_state),
+ .probe = mv88e6123_61_65_probe,
+ .setup = mv88e6123_61_65_setup,
+ .set_addr = mv88e6xxx_set_addr_indirect,
+ .phy_read = mv88e6xxx_phy_read,
+ .phy_write = mv88e6xxx_phy_write,
+ .poll_link = mv88e6xxx_poll_link,
+ .get_strings = mv88e6xxx_get_strings,
+ .get_ethtool_stats = mv88e6xxx_get_ethtool_stats,
+ .get_sset_count = mv88e6xxx_get_sset_count,
+#ifdef CONFIG_NET_DSA_HWMON
+ .get_temp = mv88e6xxx_get_temp,
+#endif
+ .get_regs_len = mv88e6xxx_get_regs_len,
+ .get_regs = mv88e6xxx_get_regs,
+};
+
+MODULE_ALIAS("platform:mv88e6123");
+MODULE_ALIAS("platform:mv88e6161");
+MODULE_ALIAS("platform:mv88e6165");
diff --git a/kernel/drivers/net/dsa/mv88e6131.c b/kernel/drivers/net/dsa/mv88e6131.c
new file mode 100644
index 000000000..e54824fa0
--- /dev/null
+++ b/kernel/drivers/net/dsa/mv88e6131.c
@@ -0,0 +1,319 @@
+/*
+ * net/dsa/mv88e6131.c - Marvell 88e6095/6095f/6131 switch chip support
+ * Copyright (c) 2008-2009 Marvell Semiconductor
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/delay.h>
+#include <linux/jiffies.h>
+#include <linux/list.h>
+#include <linux/module.h>
+#include <linux/netdevice.h>
+#include <linux/phy.h>
+#include <net/dsa.h>
+#include "mv88e6xxx.h"
+
+static char *mv88e6131_probe(struct device *host_dev, int sw_addr)
+{
+ struct mii_bus *bus = dsa_host_dev_to_mii_bus(host_dev);
+ int ret;
+
+ if (bus == NULL)
+ return NULL;
+
+ ret = __mv88e6xxx_reg_read(bus, sw_addr, REG_PORT(0), PORT_SWITCH_ID);
+ if (ret >= 0) {
+ int ret_masked = ret & 0xfff0;
+
+ if (ret_masked == PORT_SWITCH_ID_6085)
+ return "Marvell 88E6085";
+ if (ret_masked == PORT_SWITCH_ID_6095)
+ return "Marvell 88E6095/88E6095F";
+ if (ret == PORT_SWITCH_ID_6131_B2)
+ return "Marvell 88E6131 (B2)";
+ if (ret_masked == PORT_SWITCH_ID_6131)
+ return "Marvell 88E6131";
+ }
+
+ return NULL;
+}
+
+static int mv88e6131_setup_global(struct dsa_switch *ds)
+{
+ int ret;
+ int i;
+
+ /* Enable the PHY polling unit, don't discard packets with
+ * excessive collisions, use a weighted fair queueing scheme
+ * to arbitrate between packet queues, set the maximum frame
+ * size to 1632, and mask all interrupt sources.
+ */
+ REG_WRITE(REG_GLOBAL, 0x04, 0x4400);
+
+ /* Set the default address aging time to 5 minutes, and
+ * enable address learn messages to be sent to all message
+ * ports.
+ */
+ REG_WRITE(REG_GLOBAL, 0x0a, 0x0148);
+
+ /* Configure the priority mapping registers. */
+ ret = mv88e6xxx_config_prio(ds);
+ if (ret < 0)
+ return ret;
+
+ /* Set the VLAN ethertype to 0x8100. */
+ REG_WRITE(REG_GLOBAL, 0x19, 0x8100);
+
+ /* Disable ARP mirroring, and configure the upstream port as
+ * the port to which ingress and egress monitor frames are to
+ * be sent.
+ */
+ REG_WRITE(REG_GLOBAL, 0x1a, (dsa_upstream_port(ds) * 0x1100) | 0x00f0);
+
+ /* Disable cascade port functionality unless this device
+ * is used in a cascade configuration, and set the switch's
+ * DSA device number.
+ */
+ if (ds->dst->pd->nr_chips > 1)
+ REG_WRITE(REG_GLOBAL, 0x1c, 0xf000 | (ds->index & 0x1f));
+ else
+ REG_WRITE(REG_GLOBAL, 0x1c, 0xe000 | (ds->index & 0x1f));
+
+ /* Send all frames with destination addresses matching
+ * 01:80:c2:00:00:0x to the CPU port.
+ */
+ REG_WRITE(REG_GLOBAL2, 0x03, 0xffff);
+
+ /* Ignore removed tag data on doubly tagged packets, disable
+ * flow control messages, force flow control priority to the
+ * highest, and send all special multicast frames to the CPU
+ * port at the highest priority.
+ */
+ REG_WRITE(REG_GLOBAL2, 0x05, 0x00ff);
+
+ /* Program the DSA routing table. */
+ for (i = 0; i < 32; i++) {
+ int nexthop;
+
+ nexthop = 0x1f;
+ if (ds->pd->rtable &&
+ i != ds->index && i < ds->dst->pd->nr_chips)
+ nexthop = ds->pd->rtable[i] & 0x1f;
+
+ REG_WRITE(REG_GLOBAL2, 0x06, 0x8000 | (i << 8) | nexthop);
+ }
+
+ /* Clear all trunk masks. */
+ for (i = 0; i < 8; i++)
+ REG_WRITE(REG_GLOBAL2, 0x07, 0x8000 | (i << 12) | 0x7ff);
+
+ /* Clear all trunk mappings. */
+ for (i = 0; i < 16; i++)
+ REG_WRITE(REG_GLOBAL2, 0x08, 0x8000 | (i << 11));
+
+ /* Force the priority of IGMP/MLD snoop frames and ARP frames
+ * to the highest setting.
+ */
+ REG_WRITE(REG_GLOBAL2, 0x0f, 0x00ff);
+
+ return 0;
+}
+
+static int mv88e6131_setup_port(struct dsa_switch *ds, int p)
+{
+ struct mv88e6xxx_priv_state *ps = ds_to_priv(ds);
+ int addr = REG_PORT(p);
+ u16 val;
+
+ /* MAC Forcing register: don't force link, speed, duplex
+ * or flow control state to any particular values on physical
+ * ports, but force the CPU port and all DSA ports to 1000 Mb/s
+ * (100 Mb/s on 6085) full duplex.
+ */
+ if (dsa_is_cpu_port(ds, p) || ds->dsa_port_mask & (1 << p))
+ if (ps->id == PORT_SWITCH_ID_6085)
+ REG_WRITE(addr, 0x01, 0x003d); /* 100 Mb/s */
+ else
+ REG_WRITE(addr, 0x01, 0x003e); /* 1000 Mb/s */
+ else
+ REG_WRITE(addr, 0x01, 0x0003);
+
+ /* Port Control: disable Core Tag, disable Drop-on-Lock,
+ * transmit frames unmodified, disable Header mode,
+ * enable IGMP/MLD snoop, disable DoubleTag, disable VLAN
+ * tunneling, determine priority by looking at 802.1p and
+ * IP priority fields (IP prio has precedence), and set STP
+ * state to Forwarding.
+ *
+ * If this is the upstream port for this switch, enable
+ * forwarding of unknown unicasts, and enable DSA tagging
+ * mode.
+ *
+ * If this is the link to another switch, use DSA tagging
+ * mode, but do not enable forwarding of unknown unicasts.
+ */
+ val = 0x0433;
+ if (p == dsa_upstream_port(ds)) {
+ val |= 0x0104;
+ /* On 6085, unknown multicast forward is controlled
+ * here rather than in Port Control 2 register.
+ */
+ if (ps->id == PORT_SWITCH_ID_6085)
+ val |= 0x0008;
+ }
+ if (ds->dsa_port_mask & (1 << p))
+ val |= 0x0100;
+ REG_WRITE(addr, 0x04, val);
+
+ /* Port Control 2: don't force a good FCS, don't use
+ * VLAN-based, source address-based or destination
+ * address-based priority overrides, don't let the switch
+ * add or strip 802.1q tags, don't discard tagged or
+ * untagged frames on this port, do a destination address
+ * lookup on received packets as usual, don't send a copy
+ * of all transmitted/received frames on this port to the
+ * CPU, and configure the upstream port number.
+ *
+ * If this is the upstream port for this switch, enable
+ * forwarding of unknown multicast addresses.
+ */
+ if (ps->id == PORT_SWITCH_ID_6085)
+ /* on 6085, bits 3:0 are reserved, bit 6 control ARP
+ * mirroring, and multicast forward is handled in
+ * Port Control register.
+ */
+ REG_WRITE(addr, 0x08, 0x0080);
+ else {
+ val = 0x0080 | dsa_upstream_port(ds);
+ if (p == dsa_upstream_port(ds))
+ val |= 0x0040;
+ REG_WRITE(addr, 0x08, val);
+ }
+
+ /* Rate Control: disable ingress rate limiting. */
+ REG_WRITE(addr, 0x09, 0x0000);
+
+ /* Rate Control 2: disable egress rate limiting. */
+ REG_WRITE(addr, 0x0a, 0x0000);
+
+ /* Port Association Vector: when learning source addresses
+ * of packets, add the address to the address database using
+ * a port bitmap that has only the bit for this port set and
+ * the other bits clear.
+ */
+ REG_WRITE(addr, 0x0b, 1 << p);
+
+ /* Tag Remap: use an identity 802.1p prio -> switch prio
+ * mapping.
+ */
+ REG_WRITE(addr, 0x18, 0x3210);
+
+ /* Tag Remap 2: use an identity 802.1p prio -> switch prio
+ * mapping.
+ */
+ REG_WRITE(addr, 0x19, 0x7654);
+
+ return mv88e6xxx_setup_port_common(ds, p);
+}
+
+static int mv88e6131_setup(struct dsa_switch *ds)
+{
+ struct mv88e6xxx_priv_state *ps = ds_to_priv(ds);
+ int i;
+ int ret;
+
+ ret = mv88e6xxx_setup_common(ds);
+ if (ret < 0)
+ return ret;
+
+ mv88e6xxx_ppu_state_init(ds);
+
+ switch (ps->id) {
+ case PORT_SWITCH_ID_6085:
+ ps->num_ports = 10;
+ break;
+ case PORT_SWITCH_ID_6095:
+ ps->num_ports = 11;
+ break;
+ case PORT_SWITCH_ID_6131:
+ case PORT_SWITCH_ID_6131_B2:
+ ps->num_ports = 8;
+ break;
+ default:
+ return -ENODEV;
+ }
+
+ ret = mv88e6xxx_switch_reset(ds, false);
+ if (ret < 0)
+ return ret;
+
+ /* @@@ initialise vtu and atu */
+
+ ret = mv88e6131_setup_global(ds);
+ if (ret < 0)
+ return ret;
+
+ for (i = 0; i < ps->num_ports; i++) {
+ ret = mv88e6131_setup_port(ds, i);
+ if (ret < 0)
+ return ret;
+ }
+
+ return 0;
+}
+
+static int mv88e6131_port_to_phy_addr(struct dsa_switch *ds, int port)
+{
+ struct mv88e6xxx_priv_state *ps = ds_to_priv(ds);
+
+ if (port >= 0 && port < ps->num_ports)
+ return port;
+
+ return -EINVAL;
+}
+
+static int
+mv88e6131_phy_read(struct dsa_switch *ds, int port, int regnum)
+{
+ int addr = mv88e6131_port_to_phy_addr(ds, port);
+
+ if (addr < 0)
+ return addr;
+
+ return mv88e6xxx_phy_read_ppu(ds, addr, regnum);
+}
+
+static int
+mv88e6131_phy_write(struct dsa_switch *ds,
+ int port, int regnum, u16 val)
+{
+ int addr = mv88e6131_port_to_phy_addr(ds, port);
+
+ if (addr < 0)
+ return addr;
+
+ return mv88e6xxx_phy_write_ppu(ds, addr, regnum, val);
+}
+
+struct dsa_switch_driver mv88e6131_switch_driver = {
+ .tag_protocol = DSA_TAG_PROTO_DSA,
+ .priv_size = sizeof(struct mv88e6xxx_priv_state),
+ .probe = mv88e6131_probe,
+ .setup = mv88e6131_setup,
+ .set_addr = mv88e6xxx_set_addr_direct,
+ .phy_read = mv88e6131_phy_read,
+ .phy_write = mv88e6131_phy_write,
+ .poll_link = mv88e6xxx_poll_link,
+ .get_strings = mv88e6xxx_get_strings,
+ .get_ethtool_stats = mv88e6xxx_get_ethtool_stats,
+ .get_sset_count = mv88e6xxx_get_sset_count,
+};
+
+MODULE_ALIAS("platform:mv88e6085");
+MODULE_ALIAS("platform:mv88e6095");
+MODULE_ALIAS("platform:mv88e6095f");
+MODULE_ALIAS("platform:mv88e6131");
diff --git a/kernel/drivers/net/dsa/mv88e6171.c b/kernel/drivers/net/dsa/mv88e6171.c
new file mode 100644
index 000000000..9104efea0
--- /dev/null
+++ b/kernel/drivers/net/dsa/mv88e6171.c
@@ -0,0 +1,311 @@
+/* net/dsa/mv88e6171.c - Marvell 88e6171/8826172 switch chip support
+ * Copyright (c) 2008-2009 Marvell Semiconductor
+ * Copyright (c) 2014 Claudio Leite <leitec@staticky.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/delay.h>
+#include <linux/jiffies.h>
+#include <linux/list.h>
+#include <linux/module.h>
+#include <linux/netdevice.h>
+#include <linux/phy.h>
+#include <net/dsa.h>
+#include "mv88e6xxx.h"
+
+static char *mv88e6171_probe(struct device *host_dev, int sw_addr)
+{
+ struct mii_bus *bus = dsa_host_dev_to_mii_bus(host_dev);
+ int ret;
+
+ if (bus == NULL)
+ return NULL;
+
+ ret = __mv88e6xxx_reg_read(bus, sw_addr, REG_PORT(0), PORT_SWITCH_ID);
+ if (ret >= 0) {
+ if ((ret & 0xfff0) == PORT_SWITCH_ID_6171)
+ return "Marvell 88E6171";
+ if ((ret & 0xfff0) == PORT_SWITCH_ID_6172)
+ return "Marvell 88E6172";
+ }
+
+ return NULL;
+}
+
+static int mv88e6171_setup_global(struct dsa_switch *ds)
+{
+ struct mv88e6xxx_priv_state *ps = ds_to_priv(ds);
+ int ret;
+ int i;
+
+ /* Discard packets with excessive collisions, mask all
+ * interrupt sources, enable PPU.
+ */
+ REG_WRITE(REG_GLOBAL, 0x04, 0x6000);
+
+ /* Set the default address aging time to 5 minutes, and
+ * enable address learn messages to be sent to all message
+ * ports.
+ */
+ REG_WRITE(REG_GLOBAL, 0x0a, 0x0148);
+
+ /* Configure the priority mapping registers. */
+ ret = mv88e6xxx_config_prio(ds);
+ if (ret < 0)
+ return ret;
+
+ /* Configure the upstream port, and configure the upstream
+ * port as the port to which ingress and egress monitor frames
+ * are to be sent.
+ */
+ if (REG_READ(REG_PORT(0), 0x03) == 0x1710)
+ REG_WRITE(REG_GLOBAL, 0x1a, (dsa_upstream_port(ds) * 0x1111));
+ else
+ REG_WRITE(REG_GLOBAL, 0x1a, (dsa_upstream_port(ds) * 0x1110));
+
+ /* Disable remote management for now, and set the switch's
+ * DSA device number.
+ */
+ REG_WRITE(REG_GLOBAL, 0x1c, ds->index & 0x1f);
+
+ /* Send all frames with destination addresses matching
+ * 01:80:c2:00:00:2x to the CPU port.
+ */
+ REG_WRITE(REG_GLOBAL2, 0x02, 0xffff);
+
+ /* Send all frames with destination addresses matching
+ * 01:80:c2:00:00:0x to the CPU port.
+ */
+ REG_WRITE(REG_GLOBAL2, 0x03, 0xffff);
+
+ /* Disable the loopback filter, disable flow control
+ * messages, disable flood broadcast override, disable
+ * removing of provider tags, disable ATU age violation
+ * interrupts, disable tag flow control, force flow
+ * control priority to the highest, and send all special
+ * multicast frames to the CPU at the highest priority.
+ */
+ REG_WRITE(REG_GLOBAL2, 0x05, 0x00ff);
+
+ /* Program the DSA routing table. */
+ for (i = 0; i < 32; i++) {
+ int nexthop;
+
+ nexthop = 0x1f;
+ if (i != ds->index && i < ds->dst->pd->nr_chips)
+ nexthop = ds->pd->rtable[i] & 0x1f;
+
+ REG_WRITE(REG_GLOBAL2, 0x06, 0x8000 | (i << 8) | nexthop);
+ }
+
+ /* Clear all trunk masks. */
+ for (i = 0; i < ps->num_ports; i++)
+ REG_WRITE(REG_GLOBAL2, 0x07, 0x8000 | (i << 12) | 0xff);
+
+ /* Clear all trunk mappings. */
+ for (i = 0; i < 16; i++)
+ REG_WRITE(REG_GLOBAL2, 0x08, 0x8000 | (i << 11));
+
+ /* Disable ingress rate limiting by resetting all ingress
+ * rate limit registers to their initial state.
+ */
+ for (i = 0; i < 6; i++)
+ REG_WRITE(REG_GLOBAL2, 0x09, 0x9000 | (i << 8));
+
+ /* Initialise cross-chip port VLAN table to reset defaults. */
+ REG_WRITE(REG_GLOBAL2, 0x0b, 0x9000);
+
+ /* Clear the priority override table. */
+ for (i = 0; i < 16; i++)
+ REG_WRITE(REG_GLOBAL2, 0x0f, 0x8000 | (i << 8));
+
+ /* @@@ initialise AVB (22/23) watchdog (27) sdet (29) registers */
+
+ return 0;
+}
+
+static int mv88e6171_setup_port(struct dsa_switch *ds, int p)
+{
+ int addr = REG_PORT(p);
+ u16 val;
+
+ /* MAC Forcing register: don't force link, speed, duplex
+ * or flow control state to any particular values on physical
+ * ports, but force the CPU port and all DSA ports to 1000 Mb/s
+ * full duplex.
+ */
+ val = REG_READ(addr, 0x01);
+ if (dsa_is_cpu_port(ds, p) || ds->dsa_port_mask & (1 << p))
+ REG_WRITE(addr, 0x01, val | 0x003e);
+ else
+ REG_WRITE(addr, 0x01, val | 0x0003);
+
+ /* Do not limit the period of time that this port can be
+ * paused for by the remote end or the period of time that
+ * this port can pause the remote end.
+ */
+ REG_WRITE(addr, 0x02, 0x0000);
+
+ /* Port Control: disable Drop-on-Unlock, disable Drop-on-Lock,
+ * disable Header mode, enable IGMP/MLD snooping, disable VLAN
+ * tunneling, determine priority by looking at 802.1p and IP
+ * priority fields (IP prio has precedence), and set STP state
+ * to Forwarding.
+ *
+ * If this is the CPU link, use DSA or EDSA tagging depending
+ * on which tagging mode was configured.
+ *
+ * If this is a link to another switch, use DSA tagging mode.
+ *
+ * If this is the upstream port for this switch, enable
+ * forwarding of unknown unicasts and multicasts.
+ */
+ val = 0x0433;
+ if (dsa_is_cpu_port(ds, p)) {
+ if (ds->dst->tag_protocol == DSA_TAG_PROTO_EDSA)
+ val |= 0x3300;
+ else
+ val |= 0x0100;
+ }
+ if (ds->dsa_port_mask & (1 << p))
+ val |= 0x0100;
+ if (p == dsa_upstream_port(ds))
+ val |= 0x000c;
+ REG_WRITE(addr, 0x04, val);
+
+ /* Port Control 2: don't force a good FCS, set the maximum
+ * frame size to 10240 bytes, don't let the switch add or
+ * strip 802.1q tags, don't discard tagged or untagged frames
+ * on this port, do a destination address lookup on all
+ * received packets as usual, disable ARP mirroring and don't
+ * send a copy of all transmitted/received frames on this port
+ * to the CPU.
+ */
+ REG_WRITE(addr, 0x08, 0x2080);
+
+ /* Egress rate control: disable egress rate control. */
+ REG_WRITE(addr, 0x09, 0x0001);
+
+ /* Egress rate control 2: disable egress rate control. */
+ REG_WRITE(addr, 0x0a, 0x0000);
+
+ /* Port Association Vector: when learning source addresses
+ * of packets, add the address to the address database using
+ * a port bitmap that has only the bit for this port set and
+ * the other bits clear.
+ */
+ REG_WRITE(addr, 0x0b, 1 << p);
+
+ /* Port ATU control: disable limiting the number of address
+ * database entries that this port is allowed to use.
+ */
+ REG_WRITE(addr, 0x0c, 0x0000);
+
+ /* Priority Override: disable DA, SA and VTU priority override. */
+ REG_WRITE(addr, 0x0d, 0x0000);
+
+ /* Port Ethertype: use the Ethertype DSA Ethertype value. */
+ REG_WRITE(addr, 0x0f, ETH_P_EDSA);
+
+ /* Tag Remap: use an identity 802.1p prio -> switch prio
+ * mapping.
+ */
+ REG_WRITE(addr, 0x18, 0x3210);
+
+ /* Tag Remap 2: use an identity 802.1p prio -> switch prio
+ * mapping.
+ */
+ REG_WRITE(addr, 0x19, 0x7654);
+
+ return mv88e6xxx_setup_port_common(ds, p);
+}
+
+static int mv88e6171_setup(struct dsa_switch *ds)
+{
+ struct mv88e6xxx_priv_state *ps = ds_to_priv(ds);
+ int i;
+ int ret;
+
+ ret = mv88e6xxx_setup_common(ds);
+ if (ret < 0)
+ return ret;
+
+ ps->num_ports = 7;
+
+ ret = mv88e6xxx_switch_reset(ds, true);
+ if (ret < 0)
+ return ret;
+
+ /* @@@ initialise vtu and atu */
+
+ ret = mv88e6171_setup_global(ds);
+ if (ret < 0)
+ return ret;
+
+ for (i = 0; i < ps->num_ports; i++) {
+ if (!(dsa_is_cpu_port(ds, i) || ds->phys_port_mask & (1 << i)))
+ continue;
+
+ ret = mv88e6171_setup_port(ds, i);
+ if (ret < 0)
+ return ret;
+ }
+
+ return 0;
+}
+
+static int mv88e6171_get_eee(struct dsa_switch *ds, int port,
+ struct ethtool_eee *e)
+{
+ struct mv88e6xxx_priv_state *ps = ds_to_priv(ds);
+
+ if (ps->id == PORT_SWITCH_ID_6172)
+ return mv88e6xxx_get_eee(ds, port, e);
+
+ return -EOPNOTSUPP;
+}
+
+static int mv88e6171_set_eee(struct dsa_switch *ds, int port,
+ struct phy_device *phydev, struct ethtool_eee *e)
+{
+ struct mv88e6xxx_priv_state *ps = ds_to_priv(ds);
+
+ if (ps->id == PORT_SWITCH_ID_6172)
+ return mv88e6xxx_set_eee(ds, port, phydev, e);
+
+ return -EOPNOTSUPP;
+}
+
+struct dsa_switch_driver mv88e6171_switch_driver = {
+ .tag_protocol = DSA_TAG_PROTO_EDSA,
+ .priv_size = sizeof(struct mv88e6xxx_priv_state),
+ .probe = mv88e6171_probe,
+ .setup = mv88e6171_setup,
+ .set_addr = mv88e6xxx_set_addr_indirect,
+ .phy_read = mv88e6xxx_phy_read_indirect,
+ .phy_write = mv88e6xxx_phy_write_indirect,
+ .poll_link = mv88e6xxx_poll_link,
+ .get_strings = mv88e6xxx_get_strings,
+ .get_ethtool_stats = mv88e6xxx_get_ethtool_stats,
+ .get_sset_count = mv88e6xxx_get_sset_count,
+ .set_eee = mv88e6171_set_eee,
+ .get_eee = mv88e6171_get_eee,
+#ifdef CONFIG_NET_DSA_HWMON
+ .get_temp = mv88e6xxx_get_temp,
+#endif
+ .get_regs_len = mv88e6xxx_get_regs_len,
+ .get_regs = mv88e6xxx_get_regs,
+ .port_join_bridge = mv88e6xxx_join_bridge,
+ .port_leave_bridge = mv88e6xxx_leave_bridge,
+ .port_stp_update = mv88e6xxx_port_stp_update,
+ .fdb_add = mv88e6xxx_port_fdb_add,
+ .fdb_del = mv88e6xxx_port_fdb_del,
+ .fdb_getnext = mv88e6xxx_port_fdb_getnext,
+};
+
+MODULE_ALIAS("platform:mv88e6171");
+MODULE_ALIAS("platform:mv88e6172");
diff --git a/kernel/drivers/net/dsa/mv88e6352.c b/kernel/drivers/net/dsa/mv88e6352.c
new file mode 100644
index 000000000..126c11b81
--- /dev/null
+++ b/kernel/drivers/net/dsa/mv88e6352.c
@@ -0,0 +1,554 @@
+/*
+ * net/dsa/mv88e6352.c - Marvell 88e6352 switch chip support
+ *
+ * Copyright (c) 2014 Guenter Roeck
+ *
+ * Derived from mv88e6123_61_65.c
+ * Copyright (c) 2008-2009 Marvell Semiconductor
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/delay.h>
+#include <linux/jiffies.h>
+#include <linux/list.h>
+#include <linux/module.h>
+#include <linux/netdevice.h>
+#include <linux/platform_device.h>
+#include <linux/phy.h>
+#include <net/dsa.h>
+#include "mv88e6xxx.h"
+
+static char *mv88e6352_probe(struct device *host_dev, int sw_addr)
+{
+ struct mii_bus *bus = dsa_host_dev_to_mii_bus(host_dev);
+ int ret;
+
+ if (bus == NULL)
+ return NULL;
+
+ ret = __mv88e6xxx_reg_read(bus, sw_addr, REG_PORT(0), PORT_SWITCH_ID);
+ if (ret >= 0) {
+ if ((ret & 0xfff0) == PORT_SWITCH_ID_6176)
+ return "Marvell 88E6176";
+ if (ret == PORT_SWITCH_ID_6352_A0)
+ return "Marvell 88E6352 (A0)";
+ if (ret == PORT_SWITCH_ID_6352_A1)
+ return "Marvell 88E6352 (A1)";
+ if ((ret & 0xfff0) == PORT_SWITCH_ID_6352)
+ return "Marvell 88E6352";
+ }
+
+ return NULL;
+}
+
+static int mv88e6352_setup_global(struct dsa_switch *ds)
+{
+ struct mv88e6xxx_priv_state *ps = ds_to_priv(ds);
+ int ret;
+ int i;
+
+ /* Discard packets with excessive collisions,
+ * mask all interrupt sources, enable PPU (bit 14, undocumented).
+ */
+ REG_WRITE(REG_GLOBAL, 0x04, 0x6000);
+
+ /* Set the default address aging time to 5 minutes, and
+ * enable address learn messages to be sent to all message
+ * ports.
+ */
+ REG_WRITE(REG_GLOBAL, 0x0a, 0x0148);
+
+ /* Configure the priority mapping registers. */
+ ret = mv88e6xxx_config_prio(ds);
+ if (ret < 0)
+ return ret;
+
+ /* Configure the upstream port, and configure the upstream
+ * port as the port to which ingress and egress monitor frames
+ * are to be sent.
+ */
+ REG_WRITE(REG_GLOBAL, 0x1a, (dsa_upstream_port(ds) * 0x1110));
+
+ /* Disable remote management for now, and set the switch's
+ * DSA device number.
+ */
+ REG_WRITE(REG_GLOBAL, 0x1c, ds->index & 0x1f);
+
+ /* Send all frames with destination addresses matching
+ * 01:80:c2:00:00:2x to the CPU port.
+ */
+ REG_WRITE(REG_GLOBAL2, 0x02, 0xffff);
+
+ /* Send all frames with destination addresses matching
+ * 01:80:c2:00:00:0x to the CPU port.
+ */
+ REG_WRITE(REG_GLOBAL2, 0x03, 0xffff);
+
+ /* Disable the loopback filter, disable flow control
+ * messages, disable flood broadcast override, disable
+ * removing of provider tags, disable ATU age violation
+ * interrupts, disable tag flow control, force flow
+ * control priority to the highest, and send all special
+ * multicast frames to the CPU at the highest priority.
+ */
+ REG_WRITE(REG_GLOBAL2, 0x05, 0x00ff);
+
+ /* Program the DSA routing table. */
+ for (i = 0; i < 32; i++) {
+ int nexthop = 0x1f;
+
+ if (i != ds->index && i < ds->dst->pd->nr_chips)
+ nexthop = ds->pd->rtable[i] & 0x1f;
+
+ REG_WRITE(REG_GLOBAL2, 0x06, 0x8000 | (i << 8) | nexthop);
+ }
+
+ /* Clear all trunk masks. */
+ for (i = 0; i < 8; i++)
+ REG_WRITE(REG_GLOBAL2, 0x07, 0x8000 | (i << 12) | 0x7f);
+
+ /* Clear all trunk mappings. */
+ for (i = 0; i < 16; i++)
+ REG_WRITE(REG_GLOBAL2, 0x08, 0x8000 | (i << 11));
+
+ /* Disable ingress rate limiting by resetting all ingress
+ * rate limit registers to their initial state.
+ */
+ for (i = 0; i < ps->num_ports; i++)
+ REG_WRITE(REG_GLOBAL2, 0x09, 0x9000 | (i << 8));
+
+ /* Initialise cross-chip port VLAN table to reset defaults. */
+ REG_WRITE(REG_GLOBAL2, 0x0b, 0x9000);
+
+ /* Clear the priority override table. */
+ for (i = 0; i < 16; i++)
+ REG_WRITE(REG_GLOBAL2, 0x0f, 0x8000 | (i << 8));
+
+ /* @@@ initialise AVB (22/23) watchdog (27) sdet (29) registers */
+
+ return 0;
+}
+
+static int mv88e6352_setup_port(struct dsa_switch *ds, int p)
+{
+ int addr = REG_PORT(p);
+ u16 val;
+
+ /* MAC Forcing register: don't force link, speed, duplex
+ * or flow control state to any particular values on physical
+ * ports, but force the CPU port and all DSA ports to 1000 Mb/s
+ * full duplex.
+ */
+ if (dsa_is_cpu_port(ds, p) || ds->dsa_port_mask & (1 << p))
+ REG_WRITE(addr, 0x01, 0x003e);
+ else
+ REG_WRITE(addr, 0x01, 0x0003);
+
+ /* Do not limit the period of time that this port can be
+ * paused for by the remote end or the period of time that
+ * this port can pause the remote end.
+ */
+ REG_WRITE(addr, 0x02, 0x0000);
+
+ /* Port Control: disable Drop-on-Unlock, disable Drop-on-Lock,
+ * disable Header mode, enable IGMP/MLD snooping, disable VLAN
+ * tunneling, determine priority by looking at 802.1p and IP
+ * priority fields (IP prio has precedence), and set STP state
+ * to Forwarding.
+ *
+ * If this is the CPU link, use DSA or EDSA tagging depending
+ * on which tagging mode was configured.
+ *
+ * If this is a link to another switch, use DSA tagging mode.
+ *
+ * If this is the upstream port for this switch, enable
+ * forwarding of unknown unicasts and multicasts.
+ */
+ val = 0x0433;
+ if (dsa_is_cpu_port(ds, p)) {
+ if (ds->dst->tag_protocol == DSA_TAG_PROTO_EDSA)
+ val |= 0x3300;
+ else
+ val |= 0x0100;
+ }
+ if (ds->dsa_port_mask & (1 << p))
+ val |= 0x0100;
+ if (p == dsa_upstream_port(ds))
+ val |= 0x000c;
+ REG_WRITE(addr, 0x04, val);
+
+ /* Port Control 2: don't force a good FCS, set the maximum
+ * frame size to 10240 bytes, don't let the switch add or
+ * strip 802.1q tags, don't discard tagged or untagged frames
+ * on this port, do a destination address lookup on all
+ * received packets as usual, disable ARP mirroring and don't
+ * send a copy of all transmitted/received frames on this port
+ * to the CPU.
+ */
+ REG_WRITE(addr, 0x08, 0x2080);
+
+ /* Egress rate control: disable egress rate control. */
+ REG_WRITE(addr, 0x09, 0x0001);
+
+ /* Egress rate control 2: disable egress rate control. */
+ REG_WRITE(addr, 0x0a, 0x0000);
+
+ /* Port Association Vector: when learning source addresses
+ * of packets, add the address to the address database using
+ * a port bitmap that has only the bit for this port set and
+ * the other bits clear.
+ */
+ REG_WRITE(addr, 0x0b, 1 << p);
+
+ /* Port ATU control: disable limiting the number of address
+ * database entries that this port is allowed to use.
+ */
+ REG_WRITE(addr, 0x0c, 0x0000);
+
+ /* Priority Override: disable DA, SA and VTU priority override. */
+ REG_WRITE(addr, 0x0d, 0x0000);
+
+ /* Port Ethertype: use the Ethertype DSA Ethertype value. */
+ REG_WRITE(addr, 0x0f, ETH_P_EDSA);
+
+ /* Tag Remap: use an identity 802.1p prio -> switch prio
+ * mapping.
+ */
+ REG_WRITE(addr, 0x18, 0x3210);
+
+ /* Tag Remap 2: use an identity 802.1p prio -> switch prio
+ * mapping.
+ */
+ REG_WRITE(addr, 0x19, 0x7654);
+
+ return mv88e6xxx_setup_port_common(ds, p);
+}
+
+#ifdef CONFIG_NET_DSA_HWMON
+
+static int mv88e6352_get_temp(struct dsa_switch *ds, int *temp)
+{
+ int ret;
+
+ *temp = 0;
+
+ ret = mv88e6xxx_phy_page_read(ds, 0, 6, 27);
+ if (ret < 0)
+ return ret;
+
+ *temp = (ret & 0xff) - 25;
+
+ return 0;
+}
+
+static int mv88e6352_get_temp_limit(struct dsa_switch *ds, int *temp)
+{
+ int ret;
+
+ *temp = 0;
+
+ ret = mv88e6xxx_phy_page_read(ds, 0, 6, 26);
+ if (ret < 0)
+ return ret;
+
+ *temp = (((ret >> 8) & 0x1f) * 5) - 25;
+
+ return 0;
+}
+
+static int mv88e6352_set_temp_limit(struct dsa_switch *ds, int temp)
+{
+ int ret;
+
+ ret = mv88e6xxx_phy_page_read(ds, 0, 6, 26);
+ if (ret < 0)
+ return ret;
+ temp = clamp_val(DIV_ROUND_CLOSEST(temp, 5) + 5, 0, 0x1f);
+ return mv88e6xxx_phy_page_write(ds, 0, 6, 26,
+ (ret & 0xe0ff) | (temp << 8));
+}
+
+static int mv88e6352_get_temp_alarm(struct dsa_switch *ds, bool *alarm)
+{
+ int ret;
+
+ *alarm = false;
+
+ ret = mv88e6xxx_phy_page_read(ds, 0, 6, 26);
+ if (ret < 0)
+ return ret;
+
+ *alarm = !!(ret & 0x40);
+
+ return 0;
+}
+#endif /* CONFIG_NET_DSA_HWMON */
+
+static int mv88e6352_setup(struct dsa_switch *ds)
+{
+ struct mv88e6xxx_priv_state *ps = ds_to_priv(ds);
+ int ret;
+ int i;
+
+ ret = mv88e6xxx_setup_common(ds);
+ if (ret < 0)
+ return ret;
+
+ ps->num_ports = 7;
+
+ mutex_init(&ps->eeprom_mutex);
+
+ ret = mv88e6xxx_switch_reset(ds, true);
+ if (ret < 0)
+ return ret;
+
+ /* @@@ initialise vtu and atu */
+
+ ret = mv88e6352_setup_global(ds);
+ if (ret < 0)
+ return ret;
+
+ for (i = 0; i < ps->num_ports; i++) {
+ ret = mv88e6352_setup_port(ds, i);
+ if (ret < 0)
+ return ret;
+ }
+
+ return 0;
+}
+
+static int mv88e6352_read_eeprom_word(struct dsa_switch *ds, int addr)
+{
+ struct mv88e6xxx_priv_state *ps = ds_to_priv(ds);
+ int ret;
+
+ mutex_lock(&ps->eeprom_mutex);
+
+ ret = mv88e6xxx_reg_write(ds, REG_GLOBAL2, 0x14,
+ 0xc000 | (addr & 0xff));
+ if (ret < 0)
+ goto error;
+
+ ret = mv88e6xxx_eeprom_busy_wait(ds);
+ if (ret < 0)
+ goto error;
+
+ ret = mv88e6xxx_reg_read(ds, REG_GLOBAL2, 0x15);
+error:
+ mutex_unlock(&ps->eeprom_mutex);
+ return ret;
+}
+
+static int mv88e6352_get_eeprom(struct dsa_switch *ds,
+ struct ethtool_eeprom *eeprom, u8 *data)
+{
+ int offset;
+ int len;
+ int ret;
+
+ offset = eeprom->offset;
+ len = eeprom->len;
+ eeprom->len = 0;
+
+ eeprom->magic = 0xc3ec4951;
+
+ ret = mv88e6xxx_eeprom_load_wait(ds);
+ if (ret < 0)
+ return ret;
+
+ if (offset & 1) {
+ int word;
+
+ word = mv88e6352_read_eeprom_word(ds, offset >> 1);
+ if (word < 0)
+ return word;
+
+ *data++ = (word >> 8) & 0xff;
+
+ offset++;
+ len--;
+ eeprom->len++;
+ }
+
+ while (len >= 2) {
+ int word;
+
+ word = mv88e6352_read_eeprom_word(ds, offset >> 1);
+ if (word < 0)
+ return word;
+
+ *data++ = word & 0xff;
+ *data++ = (word >> 8) & 0xff;
+
+ offset += 2;
+ len -= 2;
+ eeprom->len += 2;
+ }
+
+ if (len) {
+ int word;
+
+ word = mv88e6352_read_eeprom_word(ds, offset >> 1);
+ if (word < 0)
+ return word;
+
+ *data++ = word & 0xff;
+
+ offset++;
+ len--;
+ eeprom->len++;
+ }
+
+ return 0;
+}
+
+static int mv88e6352_eeprom_is_readonly(struct dsa_switch *ds)
+{
+ int ret;
+
+ ret = mv88e6xxx_reg_read(ds, REG_GLOBAL2, 0x14);
+ if (ret < 0)
+ return ret;
+
+ if (!(ret & 0x0400))
+ return -EROFS;
+
+ return 0;
+}
+
+static int mv88e6352_write_eeprom_word(struct dsa_switch *ds, int addr,
+ u16 data)
+{
+ struct mv88e6xxx_priv_state *ps = ds_to_priv(ds);
+ int ret;
+
+ mutex_lock(&ps->eeprom_mutex);
+
+ ret = mv88e6xxx_reg_write(ds, REG_GLOBAL2, 0x15, data);
+ if (ret < 0)
+ goto error;
+
+ ret = mv88e6xxx_reg_write(ds, REG_GLOBAL2, 0x14,
+ 0xb000 | (addr & 0xff));
+ if (ret < 0)
+ goto error;
+
+ ret = mv88e6xxx_eeprom_busy_wait(ds);
+error:
+ mutex_unlock(&ps->eeprom_mutex);
+ return ret;
+}
+
+static int mv88e6352_set_eeprom(struct dsa_switch *ds,
+ struct ethtool_eeprom *eeprom, u8 *data)
+{
+ int offset;
+ int ret;
+ int len;
+
+ if (eeprom->magic != 0xc3ec4951)
+ return -EINVAL;
+
+ ret = mv88e6352_eeprom_is_readonly(ds);
+ if (ret)
+ return ret;
+
+ offset = eeprom->offset;
+ len = eeprom->len;
+ eeprom->len = 0;
+
+ ret = mv88e6xxx_eeprom_load_wait(ds);
+ if (ret < 0)
+ return ret;
+
+ if (offset & 1) {
+ int word;
+
+ word = mv88e6352_read_eeprom_word(ds, offset >> 1);
+ if (word < 0)
+ return word;
+
+ word = (*data++ << 8) | (word & 0xff);
+
+ ret = mv88e6352_write_eeprom_word(ds, offset >> 1, word);
+ if (ret < 0)
+ return ret;
+
+ offset++;
+ len--;
+ eeprom->len++;
+ }
+
+ while (len >= 2) {
+ int word;
+
+ word = *data++;
+ word |= *data++ << 8;
+
+ ret = mv88e6352_write_eeprom_word(ds, offset >> 1, word);
+ if (ret < 0)
+ return ret;
+
+ offset += 2;
+ len -= 2;
+ eeprom->len += 2;
+ }
+
+ if (len) {
+ int word;
+
+ word = mv88e6352_read_eeprom_word(ds, offset >> 1);
+ if (word < 0)
+ return word;
+
+ word = (word & 0xff00) | *data++;
+
+ ret = mv88e6352_write_eeprom_word(ds, offset >> 1, word);
+ if (ret < 0)
+ return ret;
+
+ offset++;
+ len--;
+ eeprom->len++;
+ }
+
+ return 0;
+}
+
+struct dsa_switch_driver mv88e6352_switch_driver = {
+ .tag_protocol = DSA_TAG_PROTO_EDSA,
+ .priv_size = sizeof(struct mv88e6xxx_priv_state),
+ .probe = mv88e6352_probe,
+ .setup = mv88e6352_setup,
+ .set_addr = mv88e6xxx_set_addr_indirect,
+ .phy_read = mv88e6xxx_phy_read_indirect,
+ .phy_write = mv88e6xxx_phy_write_indirect,
+ .poll_link = mv88e6xxx_poll_link,
+ .get_strings = mv88e6xxx_get_strings,
+ .get_ethtool_stats = mv88e6xxx_get_ethtool_stats,
+ .get_sset_count = mv88e6xxx_get_sset_count,
+ .set_eee = mv88e6xxx_set_eee,
+ .get_eee = mv88e6xxx_get_eee,
+#ifdef CONFIG_NET_DSA_HWMON
+ .get_temp = mv88e6352_get_temp,
+ .get_temp_limit = mv88e6352_get_temp_limit,
+ .set_temp_limit = mv88e6352_set_temp_limit,
+ .get_temp_alarm = mv88e6352_get_temp_alarm,
+#endif
+ .get_eeprom = mv88e6352_get_eeprom,
+ .set_eeprom = mv88e6352_set_eeprom,
+ .get_regs_len = mv88e6xxx_get_regs_len,
+ .get_regs = mv88e6xxx_get_regs,
+ .port_join_bridge = mv88e6xxx_join_bridge,
+ .port_leave_bridge = mv88e6xxx_leave_bridge,
+ .port_stp_update = mv88e6xxx_port_stp_update,
+ .fdb_add = mv88e6xxx_port_fdb_add,
+ .fdb_del = mv88e6xxx_port_fdb_del,
+ .fdb_getnext = mv88e6xxx_port_fdb_getnext,
+};
+
+MODULE_ALIAS("platform:mv88e6352");
diff --git a/kernel/drivers/net/dsa/mv88e6xxx.c b/kernel/drivers/net/dsa/mv88e6xxx.c
new file mode 100644
index 000000000..cf309aa92
--- /dev/null
+++ b/kernel/drivers/net/dsa/mv88e6xxx.c
@@ -0,0 +1,1486 @@
+/*
+ * net/dsa/mv88e6xxx.c - Marvell 88e6xxx switch chip support
+ * Copyright (c) 2008 Marvell Semiconductor
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/delay.h>
+#include <linux/etherdevice.h>
+#include <linux/if_bridge.h>
+#include <linux/jiffies.h>
+#include <linux/list.h>
+#include <linux/module.h>
+#include <linux/netdevice.h>
+#include <linux/phy.h>
+#include <net/dsa.h>
+#include "mv88e6xxx.h"
+
+/* If the switch's ADDR[4:0] strap pins are strapped to zero, it will
+ * use all 32 SMI bus addresses on its SMI bus, and all switch registers
+ * will be directly accessible on some {device address,register address}
+ * pair. If the ADDR[4:0] pins are not strapped to zero, the switch
+ * will only respond to SMI transactions to that specific address, and
+ * an indirect addressing mechanism needs to be used to access its
+ * registers.
+ */
+static int mv88e6xxx_reg_wait_ready(struct mii_bus *bus, int sw_addr)
+{
+ int ret;
+ int i;
+
+ for (i = 0; i < 16; i++) {
+ ret = mdiobus_read(bus, sw_addr, SMI_CMD);
+ if (ret < 0)
+ return ret;
+
+ if ((ret & SMI_CMD_BUSY) == 0)
+ return 0;
+ }
+
+ return -ETIMEDOUT;
+}
+
+int __mv88e6xxx_reg_read(struct mii_bus *bus, int sw_addr, int addr, int reg)
+{
+ int ret;
+
+ if (sw_addr == 0)
+ return mdiobus_read(bus, addr, reg);
+
+ /* Wait for the bus to become free. */
+ ret = mv88e6xxx_reg_wait_ready(bus, sw_addr);
+ if (ret < 0)
+ return ret;
+
+ /* Transmit the read command. */
+ ret = mdiobus_write(bus, sw_addr, SMI_CMD,
+ SMI_CMD_OP_22_READ | (addr << 5) | reg);
+ if (ret < 0)
+ return ret;
+
+ /* Wait for the read command to complete. */
+ ret = mv88e6xxx_reg_wait_ready(bus, sw_addr);
+ if (ret < 0)
+ return ret;
+
+ /* Read the data. */
+ ret = mdiobus_read(bus, sw_addr, SMI_DATA);
+ if (ret < 0)
+ return ret;
+
+ return ret & 0xffff;
+}
+
+/* Must be called with SMI mutex held */
+static int _mv88e6xxx_reg_read(struct dsa_switch *ds, int addr, int reg)
+{
+ struct mii_bus *bus = dsa_host_dev_to_mii_bus(ds->master_dev);
+ int ret;
+
+ if (bus == NULL)
+ return -EINVAL;
+
+ ret = __mv88e6xxx_reg_read(bus, ds->pd->sw_addr, addr, reg);
+ if (ret < 0)
+ return ret;
+
+ dev_dbg(ds->master_dev, "<- addr: 0x%.2x reg: 0x%.2x val: 0x%.4x\n",
+ addr, reg, ret);
+
+ return ret;
+}
+
+int mv88e6xxx_reg_read(struct dsa_switch *ds, int addr, int reg)
+{
+ struct mv88e6xxx_priv_state *ps = ds_to_priv(ds);
+ int ret;
+
+ mutex_lock(&ps->smi_mutex);
+ ret = _mv88e6xxx_reg_read(ds, addr, reg);
+ mutex_unlock(&ps->smi_mutex);
+
+ return ret;
+}
+
+int __mv88e6xxx_reg_write(struct mii_bus *bus, int sw_addr, int addr,
+ int reg, u16 val)
+{
+ int ret;
+
+ if (sw_addr == 0)
+ return mdiobus_write(bus, addr, reg, val);
+
+ /* Wait for the bus to become free. */
+ ret = mv88e6xxx_reg_wait_ready(bus, sw_addr);
+ if (ret < 0)
+ return ret;
+
+ /* Transmit the data to write. */
+ ret = mdiobus_write(bus, sw_addr, SMI_DATA, val);
+ if (ret < 0)
+ return ret;
+
+ /* Transmit the write command. */
+ ret = mdiobus_write(bus, sw_addr, SMI_CMD,
+ SMI_CMD_OP_22_WRITE | (addr << 5) | reg);
+ if (ret < 0)
+ return ret;
+
+ /* Wait for the write command to complete. */
+ ret = mv88e6xxx_reg_wait_ready(bus, sw_addr);
+ if (ret < 0)
+ return ret;
+
+ return 0;
+}
+
+/* Must be called with SMI mutex held */
+static int _mv88e6xxx_reg_write(struct dsa_switch *ds, int addr, int reg,
+ u16 val)
+{
+ struct mii_bus *bus = dsa_host_dev_to_mii_bus(ds->master_dev);
+
+ if (bus == NULL)
+ return -EINVAL;
+
+ dev_dbg(ds->master_dev, "-> addr: 0x%.2x reg: 0x%.2x val: 0x%.4x\n",
+ addr, reg, val);
+
+ return __mv88e6xxx_reg_write(bus, ds->pd->sw_addr, addr, reg, val);
+}
+
+int mv88e6xxx_reg_write(struct dsa_switch *ds, int addr, int reg, u16 val)
+{
+ struct mv88e6xxx_priv_state *ps = ds_to_priv(ds);
+ int ret;
+
+ mutex_lock(&ps->smi_mutex);
+ ret = _mv88e6xxx_reg_write(ds, addr, reg, val);
+ mutex_unlock(&ps->smi_mutex);
+
+ return ret;
+}
+
+int mv88e6xxx_config_prio(struct dsa_switch *ds)
+{
+ /* Configure the IP ToS mapping registers. */
+ REG_WRITE(REG_GLOBAL, GLOBAL_IP_PRI_0, 0x0000);
+ REG_WRITE(REG_GLOBAL, GLOBAL_IP_PRI_1, 0x0000);
+ REG_WRITE(REG_GLOBAL, GLOBAL_IP_PRI_2, 0x5555);
+ REG_WRITE(REG_GLOBAL, GLOBAL_IP_PRI_3, 0x5555);
+ REG_WRITE(REG_GLOBAL, GLOBAL_IP_PRI_4, 0xaaaa);
+ REG_WRITE(REG_GLOBAL, GLOBAL_IP_PRI_5, 0xaaaa);
+ REG_WRITE(REG_GLOBAL, GLOBAL_IP_PRI_6, 0xffff);
+ REG_WRITE(REG_GLOBAL, GLOBAL_IP_PRI_7, 0xffff);
+
+ /* Configure the IEEE 802.1p priority mapping register. */
+ REG_WRITE(REG_GLOBAL, GLOBAL_IEEE_PRI, 0xfa41);
+
+ return 0;
+}
+
+int mv88e6xxx_set_addr_direct(struct dsa_switch *ds, u8 *addr)
+{
+ REG_WRITE(REG_GLOBAL, GLOBAL_MAC_01, (addr[0] << 8) | addr[1]);
+ REG_WRITE(REG_GLOBAL, GLOBAL_MAC_23, (addr[2] << 8) | addr[3]);
+ REG_WRITE(REG_GLOBAL, GLOBAL_MAC_45, (addr[4] << 8) | addr[5]);
+
+ return 0;
+}
+
+int mv88e6xxx_set_addr_indirect(struct dsa_switch *ds, u8 *addr)
+{
+ int i;
+ int ret;
+
+ for (i = 0; i < 6; i++) {
+ int j;
+
+ /* Write the MAC address byte. */
+ REG_WRITE(REG_GLOBAL2, GLOBAL2_SWITCH_MAC,
+ GLOBAL2_SWITCH_MAC_BUSY | (i << 8) | addr[i]);
+
+ /* Wait for the write to complete. */
+ for (j = 0; j < 16; j++) {
+ ret = REG_READ(REG_GLOBAL2, GLOBAL2_SWITCH_MAC);
+ if ((ret & GLOBAL2_SWITCH_MAC_BUSY) == 0)
+ break;
+ }
+ if (j == 16)
+ return -ETIMEDOUT;
+ }
+
+ return 0;
+}
+
+/* Must be called with phy mutex held */
+static int _mv88e6xxx_phy_read(struct dsa_switch *ds, int addr, int regnum)
+{
+ if (addr >= 0)
+ return mv88e6xxx_reg_read(ds, addr, regnum);
+ return 0xffff;
+}
+
+/* Must be called with phy mutex held */
+static int _mv88e6xxx_phy_write(struct dsa_switch *ds, int addr, int regnum,
+ u16 val)
+{
+ if (addr >= 0)
+ return mv88e6xxx_reg_write(ds, addr, regnum, val);
+ return 0;
+}
+
+#ifdef CONFIG_NET_DSA_MV88E6XXX_NEED_PPU
+static int mv88e6xxx_ppu_disable(struct dsa_switch *ds)
+{
+ int ret;
+ unsigned long timeout;
+
+ ret = REG_READ(REG_GLOBAL, GLOBAL_CONTROL);
+ REG_WRITE(REG_GLOBAL, GLOBAL_CONTROL,
+ ret & ~GLOBAL_CONTROL_PPU_ENABLE);
+
+ timeout = jiffies + 1 * HZ;
+ while (time_before(jiffies, timeout)) {
+ ret = REG_READ(REG_GLOBAL, GLOBAL_STATUS);
+ usleep_range(1000, 2000);
+ if ((ret & GLOBAL_STATUS_PPU_MASK) !=
+ GLOBAL_STATUS_PPU_POLLING)
+ return 0;
+ }
+
+ return -ETIMEDOUT;
+}
+
+static int mv88e6xxx_ppu_enable(struct dsa_switch *ds)
+{
+ int ret;
+ unsigned long timeout;
+
+ ret = REG_READ(REG_GLOBAL, GLOBAL_CONTROL);
+ REG_WRITE(REG_GLOBAL, GLOBAL_CONTROL, ret | GLOBAL_CONTROL_PPU_ENABLE);
+
+ timeout = jiffies + 1 * HZ;
+ while (time_before(jiffies, timeout)) {
+ ret = REG_READ(REG_GLOBAL, GLOBAL_STATUS);
+ usleep_range(1000, 2000);
+ if ((ret & GLOBAL_STATUS_PPU_MASK) ==
+ GLOBAL_STATUS_PPU_POLLING)
+ return 0;
+ }
+
+ return -ETIMEDOUT;
+}
+
+static void mv88e6xxx_ppu_reenable_work(struct work_struct *ugly)
+{
+ struct mv88e6xxx_priv_state *ps;
+
+ ps = container_of(ugly, struct mv88e6xxx_priv_state, ppu_work);
+ if (mutex_trylock(&ps->ppu_mutex)) {
+ struct dsa_switch *ds = ((struct dsa_switch *)ps) - 1;
+
+ if (mv88e6xxx_ppu_enable(ds) == 0)
+ ps->ppu_disabled = 0;
+ mutex_unlock(&ps->ppu_mutex);
+ }
+}
+
+static void mv88e6xxx_ppu_reenable_timer(unsigned long _ps)
+{
+ struct mv88e6xxx_priv_state *ps = (void *)_ps;
+
+ schedule_work(&ps->ppu_work);
+}
+
+static int mv88e6xxx_ppu_access_get(struct dsa_switch *ds)
+{
+ struct mv88e6xxx_priv_state *ps = ds_to_priv(ds);
+ int ret;
+
+ mutex_lock(&ps->ppu_mutex);
+
+ /* If the PHY polling unit is enabled, disable it so that
+ * we can access the PHY registers. If it was already
+ * disabled, cancel the timer that is going to re-enable
+ * it.
+ */
+ if (!ps->ppu_disabled) {
+ ret = mv88e6xxx_ppu_disable(ds);
+ if (ret < 0) {
+ mutex_unlock(&ps->ppu_mutex);
+ return ret;
+ }
+ ps->ppu_disabled = 1;
+ } else {
+ del_timer(&ps->ppu_timer);
+ ret = 0;
+ }
+
+ return ret;
+}
+
+static void mv88e6xxx_ppu_access_put(struct dsa_switch *ds)
+{
+ struct mv88e6xxx_priv_state *ps = ds_to_priv(ds);
+
+ /* Schedule a timer to re-enable the PHY polling unit. */
+ mod_timer(&ps->ppu_timer, jiffies + msecs_to_jiffies(10));
+ mutex_unlock(&ps->ppu_mutex);
+}
+
+void mv88e6xxx_ppu_state_init(struct dsa_switch *ds)
+{
+ struct mv88e6xxx_priv_state *ps = ds_to_priv(ds);
+
+ mutex_init(&ps->ppu_mutex);
+ INIT_WORK(&ps->ppu_work, mv88e6xxx_ppu_reenable_work);
+ init_timer(&ps->ppu_timer);
+ ps->ppu_timer.data = (unsigned long)ps;
+ ps->ppu_timer.function = mv88e6xxx_ppu_reenable_timer;
+}
+
+int mv88e6xxx_phy_read_ppu(struct dsa_switch *ds, int addr, int regnum)
+{
+ int ret;
+
+ ret = mv88e6xxx_ppu_access_get(ds);
+ if (ret >= 0) {
+ ret = mv88e6xxx_reg_read(ds, addr, regnum);
+ mv88e6xxx_ppu_access_put(ds);
+ }
+
+ return ret;
+}
+
+int mv88e6xxx_phy_write_ppu(struct dsa_switch *ds, int addr,
+ int regnum, u16 val)
+{
+ int ret;
+
+ ret = mv88e6xxx_ppu_access_get(ds);
+ if (ret >= 0) {
+ ret = mv88e6xxx_reg_write(ds, addr, regnum, val);
+ mv88e6xxx_ppu_access_put(ds);
+ }
+
+ return ret;
+}
+#endif
+
+void mv88e6xxx_poll_link(struct dsa_switch *ds)
+{
+ int i;
+
+ for (i = 0; i < DSA_MAX_PORTS; i++) {
+ struct net_device *dev;
+ int uninitialized_var(port_status);
+ int link;
+ int speed;
+ int duplex;
+ int fc;
+
+ dev = ds->ports[i];
+ if (dev == NULL)
+ continue;
+
+ link = 0;
+ if (dev->flags & IFF_UP) {
+ port_status = mv88e6xxx_reg_read(ds, REG_PORT(i),
+ PORT_STATUS);
+ if (port_status < 0)
+ continue;
+
+ link = !!(port_status & PORT_STATUS_LINK);
+ }
+
+ if (!link) {
+ if (netif_carrier_ok(dev)) {
+ netdev_info(dev, "link down\n");
+ netif_carrier_off(dev);
+ }
+ continue;
+ }
+
+ switch (port_status & PORT_STATUS_SPEED_MASK) {
+ case PORT_STATUS_SPEED_10:
+ speed = 10;
+ break;
+ case PORT_STATUS_SPEED_100:
+ speed = 100;
+ break;
+ case PORT_STATUS_SPEED_1000:
+ speed = 1000;
+ break;
+ default:
+ speed = -1;
+ break;
+ }
+ duplex = (port_status & PORT_STATUS_DUPLEX) ? 1 : 0;
+ fc = (port_status & PORT_STATUS_PAUSE_EN) ? 1 : 0;
+
+ if (!netif_carrier_ok(dev)) {
+ netdev_info(dev,
+ "link up, %d Mb/s, %s duplex, flow control %sabled\n",
+ speed,
+ duplex ? "full" : "half",
+ fc ? "en" : "dis");
+ netif_carrier_on(dev);
+ }
+ }
+}
+
+static bool mv88e6xxx_6352_family(struct dsa_switch *ds)
+{
+ struct mv88e6xxx_priv_state *ps = ds_to_priv(ds);
+
+ switch (ps->id) {
+ case PORT_SWITCH_ID_6352:
+ case PORT_SWITCH_ID_6172:
+ case PORT_SWITCH_ID_6176:
+ return true;
+ }
+ return false;
+}
+
+static int mv88e6xxx_stats_wait(struct dsa_switch *ds)
+{
+ int ret;
+ int i;
+
+ for (i = 0; i < 10; i++) {
+ ret = REG_READ(REG_GLOBAL, GLOBAL_STATS_OP);
+ if ((ret & GLOBAL_STATS_OP_BUSY) == 0)
+ return 0;
+ }
+
+ return -ETIMEDOUT;
+}
+
+static int mv88e6xxx_stats_snapshot(struct dsa_switch *ds, int port)
+{
+ int ret;
+
+ if (mv88e6xxx_6352_family(ds))
+ port = (port + 1) << 5;
+
+ /* Snapshot the hardware statistics counters for this port. */
+ REG_WRITE(REG_GLOBAL, GLOBAL_STATS_OP,
+ GLOBAL_STATS_OP_CAPTURE_PORT |
+ GLOBAL_STATS_OP_HIST_RX_TX | port);
+
+ /* Wait for the snapshotting to complete. */
+ ret = mv88e6xxx_stats_wait(ds);
+ if (ret < 0)
+ return ret;
+
+ return 0;
+}
+
+static void mv88e6xxx_stats_read(struct dsa_switch *ds, int stat, u32 *val)
+{
+ u32 _val;
+ int ret;
+
+ *val = 0;
+
+ ret = mv88e6xxx_reg_write(ds, REG_GLOBAL, GLOBAL_STATS_OP,
+ GLOBAL_STATS_OP_READ_CAPTURED |
+ GLOBAL_STATS_OP_HIST_RX_TX | stat);
+ if (ret < 0)
+ return;
+
+ ret = mv88e6xxx_stats_wait(ds);
+ if (ret < 0)
+ return;
+
+ ret = mv88e6xxx_reg_read(ds, REG_GLOBAL, GLOBAL_STATS_COUNTER_32);
+ if (ret < 0)
+ return;
+
+ _val = ret << 16;
+
+ ret = mv88e6xxx_reg_read(ds, REG_GLOBAL, GLOBAL_STATS_COUNTER_01);
+ if (ret < 0)
+ return;
+
+ *val = _val | ret;
+}
+
+static struct mv88e6xxx_hw_stat mv88e6xxx_hw_stats[] = {
+ { "in_good_octets", 8, 0x00, },
+ { "in_bad_octets", 4, 0x02, },
+ { "in_unicast", 4, 0x04, },
+ { "in_broadcasts", 4, 0x06, },
+ { "in_multicasts", 4, 0x07, },
+ { "in_pause", 4, 0x16, },
+ { "in_undersize", 4, 0x18, },
+ { "in_fragments", 4, 0x19, },
+ { "in_oversize", 4, 0x1a, },
+ { "in_jabber", 4, 0x1b, },
+ { "in_rx_error", 4, 0x1c, },
+ { "in_fcs_error", 4, 0x1d, },
+ { "out_octets", 8, 0x0e, },
+ { "out_unicast", 4, 0x10, },
+ { "out_broadcasts", 4, 0x13, },
+ { "out_multicasts", 4, 0x12, },
+ { "out_pause", 4, 0x15, },
+ { "excessive", 4, 0x11, },
+ { "collisions", 4, 0x1e, },
+ { "deferred", 4, 0x05, },
+ { "single", 4, 0x14, },
+ { "multiple", 4, 0x17, },
+ { "out_fcs_error", 4, 0x03, },
+ { "late", 4, 0x1f, },
+ { "hist_64bytes", 4, 0x08, },
+ { "hist_65_127bytes", 4, 0x09, },
+ { "hist_128_255bytes", 4, 0x0a, },
+ { "hist_256_511bytes", 4, 0x0b, },
+ { "hist_512_1023bytes", 4, 0x0c, },
+ { "hist_1024_max_bytes", 4, 0x0d, },
+ /* Not all devices have the following counters */
+ { "sw_in_discards", 4, 0x110, },
+ { "sw_in_filtered", 2, 0x112, },
+ { "sw_out_filtered", 2, 0x113, },
+
+};
+
+static bool have_sw_in_discards(struct dsa_switch *ds)
+{
+ struct mv88e6xxx_priv_state *ps = ds_to_priv(ds);
+
+ switch (ps->id) {
+ case PORT_SWITCH_ID_6095: case PORT_SWITCH_ID_6161:
+ case PORT_SWITCH_ID_6165: case PORT_SWITCH_ID_6171:
+ case PORT_SWITCH_ID_6172: case PORT_SWITCH_ID_6176:
+ case PORT_SWITCH_ID_6182: case PORT_SWITCH_ID_6185:
+ case PORT_SWITCH_ID_6352:
+ return true;
+ default:
+ return false;
+ }
+}
+
+static void _mv88e6xxx_get_strings(struct dsa_switch *ds,
+ int nr_stats,
+ struct mv88e6xxx_hw_stat *stats,
+ int port, uint8_t *data)
+{
+ int i;
+
+ for (i = 0; i < nr_stats; i++) {
+ memcpy(data + i * ETH_GSTRING_LEN,
+ stats[i].string, ETH_GSTRING_LEN);
+ }
+}
+
+static void _mv88e6xxx_get_ethtool_stats(struct dsa_switch *ds,
+ int nr_stats,
+ struct mv88e6xxx_hw_stat *stats,
+ int port, uint64_t *data)
+{
+ struct mv88e6xxx_priv_state *ps = ds_to_priv(ds);
+ int ret;
+ int i;
+
+ mutex_lock(&ps->stats_mutex);
+
+ ret = mv88e6xxx_stats_snapshot(ds, port);
+ if (ret < 0) {
+ mutex_unlock(&ps->stats_mutex);
+ return;
+ }
+
+ /* Read each of the counters. */
+ for (i = 0; i < nr_stats; i++) {
+ struct mv88e6xxx_hw_stat *s = stats + i;
+ u32 low;
+ u32 high = 0;
+
+ if (s->reg >= 0x100) {
+ ret = mv88e6xxx_reg_read(ds, REG_PORT(port),
+ s->reg - 0x100);
+ if (ret < 0)
+ goto error;
+ low = ret;
+ if (s->sizeof_stat == 4) {
+ ret = mv88e6xxx_reg_read(ds, REG_PORT(port),
+ s->reg - 0x100 + 1);
+ if (ret < 0)
+ goto error;
+ high = ret;
+ }
+ data[i] = (((u64)high) << 16) | low;
+ continue;
+ }
+ mv88e6xxx_stats_read(ds, s->reg, &low);
+ if (s->sizeof_stat == 8)
+ mv88e6xxx_stats_read(ds, s->reg + 1, &high);
+
+ data[i] = (((u64)high) << 32) | low;
+ }
+error:
+ mutex_unlock(&ps->stats_mutex);
+}
+
+/* All the statistics in the table */
+void
+mv88e6xxx_get_strings(struct dsa_switch *ds, int port, uint8_t *data)
+{
+ if (have_sw_in_discards(ds))
+ _mv88e6xxx_get_strings(ds, ARRAY_SIZE(mv88e6xxx_hw_stats),
+ mv88e6xxx_hw_stats, port, data);
+ else
+ _mv88e6xxx_get_strings(ds, ARRAY_SIZE(mv88e6xxx_hw_stats) - 3,
+ mv88e6xxx_hw_stats, port, data);
+}
+
+int mv88e6xxx_get_sset_count(struct dsa_switch *ds)
+{
+ if (have_sw_in_discards(ds))
+ return ARRAY_SIZE(mv88e6xxx_hw_stats);
+ return ARRAY_SIZE(mv88e6xxx_hw_stats) - 3;
+}
+
+void
+mv88e6xxx_get_ethtool_stats(struct dsa_switch *ds,
+ int port, uint64_t *data)
+{
+ if (have_sw_in_discards(ds))
+ _mv88e6xxx_get_ethtool_stats(
+ ds, ARRAY_SIZE(mv88e6xxx_hw_stats),
+ mv88e6xxx_hw_stats, port, data);
+ else
+ _mv88e6xxx_get_ethtool_stats(
+ ds, ARRAY_SIZE(mv88e6xxx_hw_stats) - 3,
+ mv88e6xxx_hw_stats, port, data);
+}
+
+int mv88e6xxx_get_regs_len(struct dsa_switch *ds, int port)
+{
+ return 32 * sizeof(u16);
+}
+
+void mv88e6xxx_get_regs(struct dsa_switch *ds, int port,
+ struct ethtool_regs *regs, void *_p)
+{
+ u16 *p = _p;
+ int i;
+
+ regs->version = 0;
+
+ memset(p, 0xff, 32 * sizeof(u16));
+
+ for (i = 0; i < 32; i++) {
+ int ret;
+
+ ret = mv88e6xxx_reg_read(ds, REG_PORT(port), i);
+ if (ret >= 0)
+ p[i] = ret;
+ }
+}
+
+#ifdef CONFIG_NET_DSA_HWMON
+
+int mv88e6xxx_get_temp(struct dsa_switch *ds, int *temp)
+{
+ struct mv88e6xxx_priv_state *ps = ds_to_priv(ds);
+ int ret;
+ int val;
+
+ *temp = 0;
+
+ mutex_lock(&ps->phy_mutex);
+
+ ret = _mv88e6xxx_phy_write(ds, 0x0, 0x16, 0x6);
+ if (ret < 0)
+ goto error;
+
+ /* Enable temperature sensor */
+ ret = _mv88e6xxx_phy_read(ds, 0x0, 0x1a);
+ if (ret < 0)
+ goto error;
+
+ ret = _mv88e6xxx_phy_write(ds, 0x0, 0x1a, ret | (1 << 5));
+ if (ret < 0)
+ goto error;
+
+ /* Wait for temperature to stabilize */
+ usleep_range(10000, 12000);
+
+ val = _mv88e6xxx_phy_read(ds, 0x0, 0x1a);
+ if (val < 0) {
+ ret = val;
+ goto error;
+ }
+
+ /* Disable temperature sensor */
+ ret = _mv88e6xxx_phy_write(ds, 0x0, 0x1a, ret & ~(1 << 5));
+ if (ret < 0)
+ goto error;
+
+ *temp = ((val & 0x1f) - 5) * 5;
+
+error:
+ _mv88e6xxx_phy_write(ds, 0x0, 0x16, 0x0);
+ mutex_unlock(&ps->phy_mutex);
+ return ret;
+}
+#endif /* CONFIG_NET_DSA_HWMON */
+
+static int mv88e6xxx_wait(struct dsa_switch *ds, int reg, int offset, u16 mask)
+{
+ unsigned long timeout = jiffies + HZ / 10;
+
+ while (time_before(jiffies, timeout)) {
+ int ret;
+
+ ret = REG_READ(reg, offset);
+ if (!(ret & mask))
+ return 0;
+
+ usleep_range(1000, 2000);
+ }
+ return -ETIMEDOUT;
+}
+
+int mv88e6xxx_phy_wait(struct dsa_switch *ds)
+{
+ return mv88e6xxx_wait(ds, REG_GLOBAL2, GLOBAL2_SMI_OP,
+ GLOBAL2_SMI_OP_BUSY);
+}
+
+int mv88e6xxx_eeprom_load_wait(struct dsa_switch *ds)
+{
+ return mv88e6xxx_wait(ds, REG_GLOBAL2, GLOBAL2_EEPROM_OP,
+ GLOBAL2_EEPROM_OP_LOAD);
+}
+
+int mv88e6xxx_eeprom_busy_wait(struct dsa_switch *ds)
+{
+ return mv88e6xxx_wait(ds, REG_GLOBAL2, GLOBAL2_EEPROM_OP,
+ GLOBAL2_EEPROM_OP_BUSY);
+}
+
+/* Must be called with SMI lock held */
+static int _mv88e6xxx_wait(struct dsa_switch *ds, int reg, int offset, u16 mask)
+{
+ unsigned long timeout = jiffies + HZ / 10;
+
+ while (time_before(jiffies, timeout)) {
+ int ret;
+
+ ret = _mv88e6xxx_reg_read(ds, reg, offset);
+ if (ret < 0)
+ return ret;
+ if (!(ret & mask))
+ return 0;
+
+ usleep_range(1000, 2000);
+ }
+ return -ETIMEDOUT;
+}
+
+/* Must be called with SMI lock held */
+static int _mv88e6xxx_atu_wait(struct dsa_switch *ds)
+{
+ return _mv88e6xxx_wait(ds, REG_GLOBAL, GLOBAL_ATU_OP,
+ GLOBAL_ATU_OP_BUSY);
+}
+
+/* Must be called with phy mutex held */
+static int _mv88e6xxx_phy_read_indirect(struct dsa_switch *ds, int addr,
+ int regnum)
+{
+ int ret;
+
+ REG_WRITE(REG_GLOBAL2, GLOBAL2_SMI_OP,
+ GLOBAL2_SMI_OP_22_READ | (addr << 5) | regnum);
+
+ ret = mv88e6xxx_phy_wait(ds);
+ if (ret < 0)
+ return ret;
+
+ return REG_READ(REG_GLOBAL2, GLOBAL2_SMI_DATA);
+}
+
+/* Must be called with phy mutex held */
+static int _mv88e6xxx_phy_write_indirect(struct dsa_switch *ds, int addr,
+ int regnum, u16 val)
+{
+ REG_WRITE(REG_GLOBAL2, GLOBAL2_SMI_DATA, val);
+ REG_WRITE(REG_GLOBAL2, GLOBAL2_SMI_OP,
+ GLOBAL2_SMI_OP_22_WRITE | (addr << 5) | regnum);
+
+ return mv88e6xxx_phy_wait(ds);
+}
+
+int mv88e6xxx_get_eee(struct dsa_switch *ds, int port, struct ethtool_eee *e)
+{
+ struct mv88e6xxx_priv_state *ps = ds_to_priv(ds);
+ int reg;
+
+ mutex_lock(&ps->phy_mutex);
+
+ reg = _mv88e6xxx_phy_read_indirect(ds, port, 16);
+ if (reg < 0)
+ goto out;
+
+ e->eee_enabled = !!(reg & 0x0200);
+ e->tx_lpi_enabled = !!(reg & 0x0100);
+
+ reg = mv88e6xxx_reg_read(ds, REG_PORT(port), PORT_STATUS);
+ if (reg < 0)
+ goto out;
+
+ e->eee_active = !!(reg & PORT_STATUS_EEE);
+ reg = 0;
+
+out:
+ mutex_unlock(&ps->phy_mutex);
+ return reg;
+}
+
+int mv88e6xxx_set_eee(struct dsa_switch *ds, int port,
+ struct phy_device *phydev, struct ethtool_eee *e)
+{
+ struct mv88e6xxx_priv_state *ps = ds_to_priv(ds);
+ int reg;
+ int ret;
+
+ mutex_lock(&ps->phy_mutex);
+
+ ret = _mv88e6xxx_phy_read_indirect(ds, port, 16);
+ if (ret < 0)
+ goto out;
+
+ reg = ret & ~0x0300;
+ if (e->eee_enabled)
+ reg |= 0x0200;
+ if (e->tx_lpi_enabled)
+ reg |= 0x0100;
+
+ ret = _mv88e6xxx_phy_write_indirect(ds, port, 16, reg);
+out:
+ mutex_unlock(&ps->phy_mutex);
+
+ return ret;
+}
+
+static int _mv88e6xxx_atu_cmd(struct dsa_switch *ds, int fid, u16 cmd)
+{
+ int ret;
+
+ ret = _mv88e6xxx_reg_write(ds, REG_GLOBAL, 0x01, fid);
+ if (ret < 0)
+ return ret;
+
+ ret = _mv88e6xxx_reg_write(ds, REG_GLOBAL, GLOBAL_ATU_OP, cmd);
+ if (ret < 0)
+ return ret;
+
+ return _mv88e6xxx_atu_wait(ds);
+}
+
+static int _mv88e6xxx_flush_fid(struct dsa_switch *ds, int fid)
+{
+ int ret;
+
+ ret = _mv88e6xxx_atu_wait(ds);
+ if (ret < 0)
+ return ret;
+
+ return _mv88e6xxx_atu_cmd(ds, fid, GLOBAL_ATU_OP_FLUSH_NON_STATIC_DB);
+}
+
+static int mv88e6xxx_set_port_state(struct dsa_switch *ds, int port, u8 state)
+{
+ struct mv88e6xxx_priv_state *ps = ds_to_priv(ds);
+ int reg, ret = 0;
+ u8 oldstate;
+
+ mutex_lock(&ps->smi_mutex);
+
+ reg = _mv88e6xxx_reg_read(ds, REG_PORT(port), PORT_CONTROL);
+ if (reg < 0) {
+ ret = reg;
+ goto abort;
+ }
+
+ oldstate = reg & PORT_CONTROL_STATE_MASK;
+ if (oldstate != state) {
+ /* Flush forwarding database if we're moving a port
+ * from Learning or Forwarding state to Disabled or
+ * Blocking or Listening state.
+ */
+ if (oldstate >= PORT_CONTROL_STATE_LEARNING &&
+ state <= PORT_CONTROL_STATE_BLOCKING) {
+ ret = _mv88e6xxx_flush_fid(ds, ps->fid[port]);
+ if (ret)
+ goto abort;
+ }
+ reg = (reg & ~PORT_CONTROL_STATE_MASK) | state;
+ ret = _mv88e6xxx_reg_write(ds, REG_PORT(port), PORT_CONTROL,
+ reg);
+ }
+
+abort:
+ mutex_unlock(&ps->smi_mutex);
+ return ret;
+}
+
+/* Must be called with smi lock held */
+static int _mv88e6xxx_update_port_config(struct dsa_switch *ds, int port)
+{
+ struct mv88e6xxx_priv_state *ps = ds_to_priv(ds);
+ u8 fid = ps->fid[port];
+ u16 reg = fid << 12;
+
+ if (dsa_is_cpu_port(ds, port))
+ reg |= ds->phys_port_mask;
+ else
+ reg |= (ps->bridge_mask[fid] |
+ (1 << dsa_upstream_port(ds))) & ~(1 << port);
+
+ return _mv88e6xxx_reg_write(ds, REG_PORT(port), PORT_BASE_VLAN, reg);
+}
+
+/* Must be called with smi lock held */
+static int _mv88e6xxx_update_bridge_config(struct dsa_switch *ds, int fid)
+{
+ struct mv88e6xxx_priv_state *ps = ds_to_priv(ds);
+ int port;
+ u32 mask;
+ int ret;
+
+ mask = ds->phys_port_mask;
+ while (mask) {
+ port = __ffs(mask);
+ mask &= ~(1 << port);
+ if (ps->fid[port] != fid)
+ continue;
+
+ ret = _mv88e6xxx_update_port_config(ds, port);
+ if (ret)
+ return ret;
+ }
+
+ return _mv88e6xxx_flush_fid(ds, fid);
+}
+
+/* Bridge handling functions */
+
+int mv88e6xxx_join_bridge(struct dsa_switch *ds, int port, u32 br_port_mask)
+{
+ struct mv88e6xxx_priv_state *ps = ds_to_priv(ds);
+ int ret = 0;
+ u32 nmask;
+ int fid;
+
+ /* If the bridge group is not empty, join that group.
+ * Otherwise create a new group.
+ */
+ fid = ps->fid[port];
+ nmask = br_port_mask & ~(1 << port);
+ if (nmask)
+ fid = ps->fid[__ffs(nmask)];
+
+ nmask = ps->bridge_mask[fid] | (1 << port);
+ if (nmask != br_port_mask) {
+ netdev_err(ds->ports[port],
+ "join: Bridge port mask mismatch fid=%d mask=0x%x expected 0x%x\n",
+ fid, br_port_mask, nmask);
+ return -EINVAL;
+ }
+
+ mutex_lock(&ps->smi_mutex);
+
+ ps->bridge_mask[fid] = br_port_mask;
+
+ if (fid != ps->fid[port]) {
+ ps->fid_mask |= 1 << ps->fid[port];
+ ps->fid[port] = fid;
+ ret = _mv88e6xxx_update_bridge_config(ds, fid);
+ }
+
+ mutex_unlock(&ps->smi_mutex);
+
+ return ret;
+}
+
+int mv88e6xxx_leave_bridge(struct dsa_switch *ds, int port, u32 br_port_mask)
+{
+ struct mv88e6xxx_priv_state *ps = ds_to_priv(ds);
+ u8 fid, newfid;
+ int ret;
+
+ fid = ps->fid[port];
+
+ if (ps->bridge_mask[fid] != br_port_mask) {
+ netdev_err(ds->ports[port],
+ "leave: Bridge port mask mismatch fid=%d mask=0x%x expected 0x%x\n",
+ fid, br_port_mask, ps->bridge_mask[fid]);
+ return -EINVAL;
+ }
+
+ /* If the port was the last port of a bridge, we are done.
+ * Otherwise assign a new fid to the port, and fix up
+ * the bridge configuration.
+ */
+ if (br_port_mask == (1 << port))
+ return 0;
+
+ mutex_lock(&ps->smi_mutex);
+
+ newfid = __ffs(ps->fid_mask);
+ ps->fid[port] = newfid;
+ ps->fid_mask &= (1 << newfid);
+ ps->bridge_mask[fid] &= ~(1 << port);
+ ps->bridge_mask[newfid] = 1 << port;
+
+ ret = _mv88e6xxx_update_bridge_config(ds, fid);
+ if (!ret)
+ ret = _mv88e6xxx_update_bridge_config(ds, newfid);
+
+ mutex_unlock(&ps->smi_mutex);
+
+ return ret;
+}
+
+int mv88e6xxx_port_stp_update(struct dsa_switch *ds, int port, u8 state)
+{
+ struct mv88e6xxx_priv_state *ps = ds_to_priv(ds);
+ int stp_state;
+
+ switch (state) {
+ case BR_STATE_DISABLED:
+ stp_state = PORT_CONTROL_STATE_DISABLED;
+ break;
+ case BR_STATE_BLOCKING:
+ case BR_STATE_LISTENING:
+ stp_state = PORT_CONTROL_STATE_BLOCKING;
+ break;
+ case BR_STATE_LEARNING:
+ stp_state = PORT_CONTROL_STATE_LEARNING;
+ break;
+ case BR_STATE_FORWARDING:
+ default:
+ stp_state = PORT_CONTROL_STATE_FORWARDING;
+ break;
+ }
+
+ netdev_dbg(ds->ports[port], "port state %d [%d]\n", state, stp_state);
+
+ /* mv88e6xxx_port_stp_update may be called with softirqs disabled,
+ * so we can not update the port state directly but need to schedule it.
+ */
+ ps->port_state[port] = stp_state;
+ set_bit(port, &ps->port_state_update_mask);
+ schedule_work(&ps->bridge_work);
+
+ return 0;
+}
+
+static int __mv88e6xxx_write_addr(struct dsa_switch *ds,
+ const unsigned char *addr)
+{
+ int i, ret;
+
+ for (i = 0; i < 3; i++) {
+ ret = _mv88e6xxx_reg_write(
+ ds, REG_GLOBAL, GLOBAL_ATU_MAC_01 + i,
+ (addr[i * 2] << 8) | addr[i * 2 + 1]);
+ if (ret < 0)
+ return ret;
+ }
+
+ return 0;
+}
+
+static int __mv88e6xxx_read_addr(struct dsa_switch *ds, unsigned char *addr)
+{
+ int i, ret;
+
+ for (i = 0; i < 3; i++) {
+ ret = _mv88e6xxx_reg_read(ds, REG_GLOBAL,
+ GLOBAL_ATU_MAC_01 + i);
+ if (ret < 0)
+ return ret;
+ addr[i * 2] = ret >> 8;
+ addr[i * 2 + 1] = ret & 0xff;
+ }
+
+ return 0;
+}
+
+static int __mv88e6xxx_port_fdb_cmd(struct dsa_switch *ds, int port,
+ const unsigned char *addr, int state)
+{
+ struct mv88e6xxx_priv_state *ps = ds_to_priv(ds);
+ u8 fid = ps->fid[port];
+ int ret;
+
+ ret = _mv88e6xxx_atu_wait(ds);
+ if (ret < 0)
+ return ret;
+
+ ret = __mv88e6xxx_write_addr(ds, addr);
+ if (ret < 0)
+ return ret;
+
+ ret = _mv88e6xxx_reg_write(ds, REG_GLOBAL, GLOBAL_ATU_DATA,
+ (0x10 << port) | state);
+ if (ret)
+ return ret;
+
+ ret = _mv88e6xxx_atu_cmd(ds, fid, GLOBAL_ATU_OP_LOAD_DB);
+
+ return ret;
+}
+
+int mv88e6xxx_port_fdb_add(struct dsa_switch *ds, int port,
+ const unsigned char *addr, u16 vid)
+{
+ int state = is_multicast_ether_addr(addr) ?
+ GLOBAL_ATU_DATA_STATE_MC_STATIC :
+ GLOBAL_ATU_DATA_STATE_UC_STATIC;
+ struct mv88e6xxx_priv_state *ps = ds_to_priv(ds);
+ int ret;
+
+ mutex_lock(&ps->smi_mutex);
+ ret = __mv88e6xxx_port_fdb_cmd(ds, port, addr, state);
+ mutex_unlock(&ps->smi_mutex);
+
+ return ret;
+}
+
+int mv88e6xxx_port_fdb_del(struct dsa_switch *ds, int port,
+ const unsigned char *addr, u16 vid)
+{
+ struct mv88e6xxx_priv_state *ps = ds_to_priv(ds);
+ int ret;
+
+ mutex_lock(&ps->smi_mutex);
+ ret = __mv88e6xxx_port_fdb_cmd(ds, port, addr,
+ GLOBAL_ATU_DATA_STATE_UNUSED);
+ mutex_unlock(&ps->smi_mutex);
+
+ return ret;
+}
+
+static int __mv88e6xxx_port_getnext(struct dsa_switch *ds, int port,
+ unsigned char *addr, bool *is_static)
+{
+ struct mv88e6xxx_priv_state *ps = ds_to_priv(ds);
+ u8 fid = ps->fid[port];
+ int ret, state;
+
+ ret = _mv88e6xxx_atu_wait(ds);
+ if (ret < 0)
+ return ret;
+
+ ret = __mv88e6xxx_write_addr(ds, addr);
+ if (ret < 0)
+ return ret;
+
+ do {
+ ret = _mv88e6xxx_atu_cmd(ds, fid, GLOBAL_ATU_OP_GET_NEXT_DB);
+ if (ret < 0)
+ return ret;
+
+ ret = _mv88e6xxx_reg_read(ds, REG_GLOBAL, GLOBAL_ATU_DATA);
+ if (ret < 0)
+ return ret;
+ state = ret & GLOBAL_ATU_DATA_STATE_MASK;
+ if (state == GLOBAL_ATU_DATA_STATE_UNUSED)
+ return -ENOENT;
+ } while (!(((ret >> 4) & 0xff) & (1 << port)));
+
+ ret = __mv88e6xxx_read_addr(ds, addr);
+ if (ret < 0)
+ return ret;
+
+ *is_static = state == (is_multicast_ether_addr(addr) ?
+ GLOBAL_ATU_DATA_STATE_MC_STATIC :
+ GLOBAL_ATU_DATA_STATE_UC_STATIC);
+
+ return 0;
+}
+
+/* get next entry for port */
+int mv88e6xxx_port_fdb_getnext(struct dsa_switch *ds, int port,
+ unsigned char *addr, bool *is_static)
+{
+ struct mv88e6xxx_priv_state *ps = ds_to_priv(ds);
+ int ret;
+
+ mutex_lock(&ps->smi_mutex);
+ ret = __mv88e6xxx_port_getnext(ds, port, addr, is_static);
+ mutex_unlock(&ps->smi_mutex);
+
+ return ret;
+}
+
+static void mv88e6xxx_bridge_work(struct work_struct *work)
+{
+ struct mv88e6xxx_priv_state *ps;
+ struct dsa_switch *ds;
+ int port;
+
+ ps = container_of(work, struct mv88e6xxx_priv_state, bridge_work);
+ ds = ((struct dsa_switch *)ps) - 1;
+
+ while (ps->port_state_update_mask) {
+ port = __ffs(ps->port_state_update_mask);
+ clear_bit(port, &ps->port_state_update_mask);
+ mv88e6xxx_set_port_state(ds, port, ps->port_state[port]);
+ }
+}
+
+int mv88e6xxx_setup_port_common(struct dsa_switch *ds, int port)
+{
+ struct mv88e6xxx_priv_state *ps = ds_to_priv(ds);
+ int ret, fid;
+
+ mutex_lock(&ps->smi_mutex);
+
+ /* Port Control 1: disable trunking, disable sending
+ * learning messages to this port.
+ */
+ ret = _mv88e6xxx_reg_write(ds, REG_PORT(port), PORT_CONTROL_1, 0x0000);
+ if (ret)
+ goto abort;
+
+ /* Port based VLAN map: give each port its own address
+ * database, allow the CPU port to talk to each of the 'real'
+ * ports, and allow each of the 'real' ports to only talk to
+ * the upstream port.
+ */
+ fid = __ffs(ps->fid_mask);
+ ps->fid[port] = fid;
+ ps->fid_mask &= ~(1 << fid);
+
+ if (!dsa_is_cpu_port(ds, port))
+ ps->bridge_mask[fid] = 1 << port;
+
+ ret = _mv88e6xxx_update_port_config(ds, port);
+ if (ret)
+ goto abort;
+
+ /* Default VLAN ID and priority: don't set a default VLAN
+ * ID, and set the default packet priority to zero.
+ */
+ ret = _mv88e6xxx_reg_write(ds, REG_PORT(port), PORT_DEFAULT_VLAN,
+ 0x0000);
+abort:
+ mutex_unlock(&ps->smi_mutex);
+ return ret;
+}
+
+int mv88e6xxx_setup_common(struct dsa_switch *ds)
+{
+ struct mv88e6xxx_priv_state *ps = ds_to_priv(ds);
+
+ mutex_init(&ps->smi_mutex);
+ mutex_init(&ps->stats_mutex);
+ mutex_init(&ps->phy_mutex);
+
+ ps->id = REG_READ(REG_PORT(0), PORT_SWITCH_ID) & 0xfff0;
+
+ ps->fid_mask = (1 << DSA_MAX_PORTS) - 1;
+
+ INIT_WORK(&ps->bridge_work, mv88e6xxx_bridge_work);
+
+ return 0;
+}
+
+int mv88e6xxx_switch_reset(struct dsa_switch *ds, bool ppu_active)
+{
+ struct mv88e6xxx_priv_state *ps = ds_to_priv(ds);
+ u16 is_reset = (ppu_active ? 0x8800 : 0xc800);
+ unsigned long timeout;
+ int ret;
+ int i;
+
+ /* Set all ports to the disabled state. */
+ for (i = 0; i < ps->num_ports; i++) {
+ ret = REG_READ(REG_PORT(i), PORT_CONTROL);
+ REG_WRITE(REG_PORT(i), PORT_CONTROL, ret & 0xfffc);
+ }
+
+ /* Wait for transmit queues to drain. */
+ usleep_range(2000, 4000);
+
+ /* Reset the switch. Keep the PPU active if requested. The PPU
+ * needs to be active to support indirect phy register access
+ * through global registers 0x18 and 0x19.
+ */
+ if (ppu_active)
+ REG_WRITE(REG_GLOBAL, 0x04, 0xc000);
+ else
+ REG_WRITE(REG_GLOBAL, 0x04, 0xc400);
+
+ /* Wait up to one second for reset to complete. */
+ timeout = jiffies + 1 * HZ;
+ while (time_before(jiffies, timeout)) {
+ ret = REG_READ(REG_GLOBAL, 0x00);
+ if ((ret & is_reset) == is_reset)
+ break;
+ usleep_range(1000, 2000);
+ }
+ if (time_after(jiffies, timeout))
+ return -ETIMEDOUT;
+
+ return 0;
+}
+
+int mv88e6xxx_phy_page_read(struct dsa_switch *ds, int port, int page, int reg)
+{
+ struct mv88e6xxx_priv_state *ps = ds_to_priv(ds);
+ int ret;
+
+ mutex_lock(&ps->phy_mutex);
+ ret = _mv88e6xxx_phy_write_indirect(ds, port, 0x16, page);
+ if (ret < 0)
+ goto error;
+ ret = _mv88e6xxx_phy_read_indirect(ds, port, reg);
+error:
+ _mv88e6xxx_phy_write_indirect(ds, port, 0x16, 0x0);
+ mutex_unlock(&ps->phy_mutex);
+ return ret;
+}
+
+int mv88e6xxx_phy_page_write(struct dsa_switch *ds, int port, int page,
+ int reg, int val)
+{
+ struct mv88e6xxx_priv_state *ps = ds_to_priv(ds);
+ int ret;
+
+ mutex_lock(&ps->phy_mutex);
+ ret = _mv88e6xxx_phy_write_indirect(ds, port, 0x16, page);
+ if (ret < 0)
+ goto error;
+
+ ret = _mv88e6xxx_phy_write_indirect(ds, port, reg, val);
+error:
+ _mv88e6xxx_phy_write_indirect(ds, port, 0x16, 0x0);
+ mutex_unlock(&ps->phy_mutex);
+ return ret;
+}
+
+static int mv88e6xxx_port_to_phy_addr(struct dsa_switch *ds, int port)
+{
+ struct mv88e6xxx_priv_state *ps = ds_to_priv(ds);
+
+ if (port >= 0 && port < ps->num_ports)
+ return port;
+ return -EINVAL;
+}
+
+int
+mv88e6xxx_phy_read(struct dsa_switch *ds, int port, int regnum)
+{
+ struct mv88e6xxx_priv_state *ps = ds_to_priv(ds);
+ int addr = mv88e6xxx_port_to_phy_addr(ds, port);
+ int ret;
+
+ if (addr < 0)
+ return addr;
+
+ mutex_lock(&ps->phy_mutex);
+ ret = _mv88e6xxx_phy_read(ds, addr, regnum);
+ mutex_unlock(&ps->phy_mutex);
+ return ret;
+}
+
+int
+mv88e6xxx_phy_write(struct dsa_switch *ds, int port, int regnum, u16 val)
+{
+ struct mv88e6xxx_priv_state *ps = ds_to_priv(ds);
+ int addr = mv88e6xxx_port_to_phy_addr(ds, port);
+ int ret;
+
+ if (addr < 0)
+ return addr;
+
+ mutex_lock(&ps->phy_mutex);
+ ret = _mv88e6xxx_phy_write(ds, addr, regnum, val);
+ mutex_unlock(&ps->phy_mutex);
+ return ret;
+}
+
+int
+mv88e6xxx_phy_read_indirect(struct dsa_switch *ds, int port, int regnum)
+{
+ struct mv88e6xxx_priv_state *ps = ds_to_priv(ds);
+ int addr = mv88e6xxx_port_to_phy_addr(ds, port);
+ int ret;
+
+ if (addr < 0)
+ return addr;
+
+ mutex_lock(&ps->phy_mutex);
+ ret = _mv88e6xxx_phy_read_indirect(ds, addr, regnum);
+ mutex_unlock(&ps->phy_mutex);
+ return ret;
+}
+
+int
+mv88e6xxx_phy_write_indirect(struct dsa_switch *ds, int port, int regnum,
+ u16 val)
+{
+ struct mv88e6xxx_priv_state *ps = ds_to_priv(ds);
+ int addr = mv88e6xxx_port_to_phy_addr(ds, port);
+ int ret;
+
+ if (addr < 0)
+ return addr;
+
+ mutex_lock(&ps->phy_mutex);
+ ret = _mv88e6xxx_phy_write_indirect(ds, addr, regnum, val);
+ mutex_unlock(&ps->phy_mutex);
+ return ret;
+}
+
+static int __init mv88e6xxx_init(void)
+{
+#if IS_ENABLED(CONFIG_NET_DSA_MV88E6131)
+ register_switch_driver(&mv88e6131_switch_driver);
+#endif
+#if IS_ENABLED(CONFIG_NET_DSA_MV88E6123_61_65)
+ register_switch_driver(&mv88e6123_61_65_switch_driver);
+#endif
+#if IS_ENABLED(CONFIG_NET_DSA_MV88E6352)
+ register_switch_driver(&mv88e6352_switch_driver);
+#endif
+#if IS_ENABLED(CONFIG_NET_DSA_MV88E6171)
+ register_switch_driver(&mv88e6171_switch_driver);
+#endif
+ return 0;
+}
+module_init(mv88e6xxx_init);
+
+static void __exit mv88e6xxx_cleanup(void)
+{
+#if IS_ENABLED(CONFIG_NET_DSA_MV88E6171)
+ unregister_switch_driver(&mv88e6171_switch_driver);
+#endif
+#if IS_ENABLED(CONFIG_NET_DSA_MV88E6352)
+ unregister_switch_driver(&mv88e6352_switch_driver);
+#endif
+#if IS_ENABLED(CONFIG_NET_DSA_MV88E6123_61_65)
+ unregister_switch_driver(&mv88e6123_61_65_switch_driver);
+#endif
+#if IS_ENABLED(CONFIG_NET_DSA_MV88E6131)
+ unregister_switch_driver(&mv88e6131_switch_driver);
+#endif
+}
+module_exit(mv88e6xxx_cleanup);
+
+MODULE_AUTHOR("Lennert Buytenhek <buytenh@wantstofly.org>");
+MODULE_DESCRIPTION("Driver for Marvell 88E6XXX ethernet switch chips");
+MODULE_LICENSE("GPL");
diff --git a/kernel/drivers/net/dsa/mv88e6xxx.h b/kernel/drivers/net/dsa/mv88e6xxx.h
new file mode 100644
index 000000000..e045154f3
--- /dev/null
+++ b/kernel/drivers/net/dsa/mv88e6xxx.h
@@ -0,0 +1,339 @@
+/*
+ * net/dsa/mv88e6xxx.h - Marvell 88e6xxx switch chip support
+ * Copyright (c) 2008 Marvell Semiconductor
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef __MV88E6XXX_H
+#define __MV88E6XXX_H
+
+#define SMI_CMD 0x00
+#define SMI_CMD_BUSY BIT(15)
+#define SMI_CMD_CLAUSE_22 BIT(12)
+#define SMI_CMD_OP_22_WRITE ((1 << 10) | SMI_CMD_BUSY | SMI_CMD_CLAUSE_22)
+#define SMI_CMD_OP_22_READ ((2 << 10) | SMI_CMD_BUSY | SMI_CMD_CLAUSE_22)
+#define SMI_CMD_OP_45_WRITE_ADDR ((0 << 10) | SMI_CMD_BUSY)
+#define SMI_CMD_OP_45_WRITE_DATA ((1 << 10) | SMI_CMD_BUSY)
+#define SMI_CMD_OP_45_READ_DATA ((2 << 10) | SMI_CMD_BUSY)
+#define SMI_CMD_OP_45_READ_DATA_INC ((3 << 10) | SMI_CMD_BUSY)
+#define SMI_DATA 0x01
+
+#define REG_PORT(p) (0x10 + (p))
+#define PORT_STATUS 0x00
+#define PORT_STATUS_PAUSE_EN BIT(15)
+#define PORT_STATUS_MY_PAUSE BIT(14)
+#define PORT_STATUS_HD_FLOW BIT(13)
+#define PORT_STATUS_PHY_DETECT BIT(12)
+#define PORT_STATUS_LINK BIT(11)
+#define PORT_STATUS_DUPLEX BIT(10)
+#define PORT_STATUS_SPEED_MASK 0x0300
+#define PORT_STATUS_SPEED_10 0x0000
+#define PORT_STATUS_SPEED_100 0x0100
+#define PORT_STATUS_SPEED_1000 0x0200
+#define PORT_STATUS_EEE BIT(6) /* 6352 */
+#define PORT_STATUS_AM_DIS BIT(6) /* 6165 */
+#define PORT_STATUS_MGMII BIT(6) /* 6185 */
+#define PORT_STATUS_TX_PAUSED BIT(5)
+#define PORT_STATUS_FLOW_CTRL BIT(4)
+#define PORT_PCS_CTRL 0x01
+#define PORT_SWITCH_ID 0x03
+#define PORT_SWITCH_ID_6085 0x04a0
+#define PORT_SWITCH_ID_6095 0x0950
+#define PORT_SWITCH_ID_6123 0x1210
+#define PORT_SWITCH_ID_6123_A1 0x1212
+#define PORT_SWITCH_ID_6123_A2 0x1213
+#define PORT_SWITCH_ID_6131 0x1060
+#define PORT_SWITCH_ID_6131_B2 0x1066
+#define PORT_SWITCH_ID_6152 0x1a40
+#define PORT_SWITCH_ID_6155 0x1a50
+#define PORT_SWITCH_ID_6161 0x1610
+#define PORT_SWITCH_ID_6161_A1 0x1612
+#define PORT_SWITCH_ID_6161_A2 0x1613
+#define PORT_SWITCH_ID_6165 0x1650
+#define PORT_SWITCH_ID_6165_A1 0x1652
+#define PORT_SWITCH_ID_6165_A2 0x1653
+#define PORT_SWITCH_ID_6171 0x1710
+#define PORT_SWITCH_ID_6172 0x1720
+#define PORT_SWITCH_ID_6176 0x1760
+#define PORT_SWITCH_ID_6182 0x1a60
+#define PORT_SWITCH_ID_6185 0x1a70
+#define PORT_SWITCH_ID_6352 0x3520
+#define PORT_SWITCH_ID_6352_A0 0x3521
+#define PORT_SWITCH_ID_6352_A1 0x3522
+#define PORT_CONTROL 0x04
+#define PORT_CONTROL_STATE_MASK 0x03
+#define PORT_CONTROL_STATE_DISABLED 0x00
+#define PORT_CONTROL_STATE_BLOCKING 0x01
+#define PORT_CONTROL_STATE_LEARNING 0x02
+#define PORT_CONTROL_STATE_FORWARDING 0x03
+#define PORT_CONTROL_1 0x05
+#define PORT_BASE_VLAN 0x06
+#define PORT_DEFAULT_VLAN 0x07
+#define PORT_CONTROL_2 0x08
+#define PORT_RATE_CONTROL 0x09
+#define PORT_RATE_CONTROL_2 0x0a
+#define PORT_ASSOC_VECTOR 0x0b
+#define PORT_IN_DISCARD_LO 0x10
+#define PORT_IN_DISCARD_HI 0x11
+#define PORT_IN_FILTERED 0x12
+#define PORT_OUT_FILTERED 0x13
+#define PORT_TAG_REGMAP_0123 0x19
+#define PORT_TAG_REGMAP_4567 0x1a
+
+#define REG_GLOBAL 0x1b
+#define GLOBAL_STATUS 0x00
+#define GLOBAL_STATUS_PPU_STATE BIT(15) /* 6351 and 6171 */
+/* Two bits for 6165, 6185 etc */
+#define GLOBAL_STATUS_PPU_MASK (0x3 << 14)
+#define GLOBAL_STATUS_PPU_DISABLED_RST (0x0 << 14)
+#define GLOBAL_STATUS_PPU_INITIALIZING (0x1 << 14)
+#define GLOBAL_STATUS_PPU_DISABLED (0x2 << 14)
+#define GLOBAL_STATUS_PPU_POLLING (0x3 << 14)
+#define GLOBAL_MAC_01 0x01
+#define GLOBAL_MAC_23 0x02
+#define GLOBAL_MAC_45 0x03
+#define GLOBAL_CONTROL 0x04
+#define GLOBAL_CONTROL_SW_RESET BIT(15)
+#define GLOBAL_CONTROL_PPU_ENABLE BIT(14)
+#define GLOBAL_CONTROL_DISCARD_EXCESS BIT(13) /* 6352 */
+#define GLOBAL_CONTROL_SCHED_PRIO BIT(11) /* 6152 */
+#define GLOBAL_CONTROL_MAX_FRAME_1632 BIT(10) /* 6152 */
+#define GLOBAL_CONTROL_RELOAD_EEPROM BIT(9) /* 6152 */
+#define GLOBAL_CONTROL_DEVICE_EN BIT(7)
+#define GLOBAL_CONTROL_STATS_DONE_EN BIT(6)
+#define GLOBAL_CONTROL_VTU_PROBLEM_EN BIT(5)
+#define GLOBAL_CONTROL_VTU_DONE_EN BIT(4)
+#define GLOBAL_CONTROL_ATU_PROBLEM_EN BIT(3)
+#define GLOBAL_CONTROL_ATU_DONE_EN BIT(2)
+#define GLOBAL_CONTROL_TCAM_EN BIT(1)
+#define GLOBAL_CONTROL_EEPROM_DONE_EN BIT(0)
+#define GLOBAL_VTU_OP 0x05
+#define GLOBAL_VTU_VID 0x06
+#define GLOBAL_VTU_DATA_0_3 0x07
+#define GLOBAL_VTU_DATA_4_7 0x08
+#define GLOBAL_VTU_DATA_8_11 0x09
+#define GLOBAL_ATU_CONTROL 0x0a
+#define GLOBAL_ATU_OP 0x0b
+#define GLOBAL_ATU_OP_BUSY BIT(15)
+#define GLOBAL_ATU_OP_NOP (0 << 12)
+#define GLOBAL_ATU_OP_FLUSH_ALL ((1 << 12) | GLOBAL_ATU_OP_BUSY)
+#define GLOBAL_ATU_OP_FLUSH_NON_STATIC ((2 << 12) | GLOBAL_ATU_OP_BUSY)
+#define GLOBAL_ATU_OP_LOAD_DB ((3 << 12) | GLOBAL_ATU_OP_BUSY)
+#define GLOBAL_ATU_OP_GET_NEXT_DB ((4 << 12) | GLOBAL_ATU_OP_BUSY)
+#define GLOBAL_ATU_OP_FLUSH_DB ((5 << 12) | GLOBAL_ATU_OP_BUSY)
+#define GLOBAL_ATU_OP_FLUSH_NON_STATIC_DB ((6 << 12) | GLOBAL_ATU_OP_BUSY)
+#define GLOBAL_ATU_OP_GET_CLR_VIOLATION ((7 << 12) | GLOBAL_ATU_OP_BUSY)
+#define GLOBAL_ATU_DATA 0x0c
+#define GLOBAL_ATU_DATA_STATE_MASK 0x0f
+#define GLOBAL_ATU_DATA_STATE_UNUSED 0x00
+#define GLOBAL_ATU_DATA_STATE_UC_MGMT 0x0d
+#define GLOBAL_ATU_DATA_STATE_UC_STATIC 0x0e
+#define GLOBAL_ATU_DATA_STATE_UC_PRIO_OVER 0x0f
+#define GLOBAL_ATU_DATA_STATE_MC_NONE_RATE 0x05
+#define GLOBAL_ATU_DATA_STATE_MC_STATIC 0x07
+#define GLOBAL_ATU_DATA_STATE_MC_MGMT 0x0e
+#define GLOBAL_ATU_DATA_STATE_MC_PRIO_OVER 0x0f
+#define GLOBAL_ATU_MAC_01 0x0d
+#define GLOBAL_ATU_MAC_23 0x0e
+#define GLOBAL_ATU_MAC_45 0x0f
+#define GLOBAL_IP_PRI_0 0x10
+#define GLOBAL_IP_PRI_1 0x11
+#define GLOBAL_IP_PRI_2 0x12
+#define GLOBAL_IP_PRI_3 0x13
+#define GLOBAL_IP_PRI_4 0x14
+#define GLOBAL_IP_PRI_5 0x15
+#define GLOBAL_IP_PRI_6 0x16
+#define GLOBAL_IP_PRI_7 0x17
+#define GLOBAL_IEEE_PRI 0x18
+#define GLOBAL_CORE_TAG_TYPE 0x19
+#define GLOBAL_MONITOR_CONTROL 0x1a
+#define GLOBAL_CONTROL_2 0x1c
+#define GLOBAL_STATS_OP 0x1d
+#define GLOBAL_STATS_OP_BUSY BIT(15)
+#define GLOBAL_STATS_OP_NOP (0 << 12)
+#define GLOBAL_STATS_OP_FLUSH_ALL ((1 << 12) | GLOBAL_STATS_OP_BUSY)
+#define GLOBAL_STATS_OP_FLUSH_PORT ((2 << 12) | GLOBAL_STATS_OP_BUSY)
+#define GLOBAL_STATS_OP_READ_CAPTURED ((4 << 12) | GLOBAL_STATS_OP_BUSY)
+#define GLOBAL_STATS_OP_CAPTURE_PORT ((5 << 12) | GLOBAL_STATS_OP_BUSY)
+#define GLOBAL_STATS_OP_HIST_RX ((1 << 10) | GLOBAL_STATS_OP_BUSY)
+#define GLOBAL_STATS_OP_HIST_TX ((2 << 10) | GLOBAL_STATS_OP_BUSY)
+#define GLOBAL_STATS_OP_HIST_RX_TX ((3 << 10) | GLOBAL_STATS_OP_BUSY)
+#define GLOBAL_STATS_COUNTER_32 0x1e
+#define GLOBAL_STATS_COUNTER_01 0x1f
+
+#define REG_GLOBAL2 0x1c
+#define GLOBAL2_INT_SOURCE 0x00
+#define GLOBAL2_INT_MASK 0x01
+#define GLOBAL2_MGMT_EN_2X 0x02
+#define GLOBAL2_MGMT_EN_0X 0x03
+#define GLOBAL2_FLOW_CONTROL 0x04
+#define GLOBAL2_SWITCH_MGMT 0x05
+#define GLOBAL2_DEVICE_MAPPING 0x06
+#define GLOBAL2_TRUNK_MASK 0x07
+#define GLOBAL2_TRUNK_MAPPING 0x08
+#define GLOBAL2_INGRESS_OP 0x09
+#define GLOBAL2_INGRESS_DATA 0x0a
+#define GLOBAL2_PVT_ADDR 0x0b
+#define GLOBAL2_PVT_DATA 0x0c
+#define GLOBAL2_SWITCH_MAC 0x0d
+#define GLOBAL2_SWITCH_MAC_BUSY BIT(15)
+#define GLOBAL2_ATU_STATS 0x0e
+#define GLOBAL2_PRIO_OVERRIDE 0x0f
+#define GLOBAL2_EEPROM_OP 0x14
+#define GLOBAL2_EEPROM_OP_BUSY BIT(15)
+#define GLOBAL2_EEPROM_OP_LOAD BIT(11)
+#define GLOBAL2_EEPROM_DATA 0x15
+#define GLOBAL2_PTP_AVB_OP 0x16
+#define GLOBAL2_PTP_AVB_DATA 0x17
+#define GLOBAL2_SMI_OP 0x18
+#define GLOBAL2_SMI_OP_BUSY BIT(15)
+#define GLOBAL2_SMI_OP_CLAUSE_22 BIT(12)
+#define GLOBAL2_SMI_OP_22_WRITE ((1 << 10) | GLOBAL2_SMI_OP_BUSY | \
+ GLOBAL2_SMI_OP_CLAUSE_22)
+#define GLOBAL2_SMI_OP_22_READ ((2 << 10) | GLOBAL2_SMI_OP_BUSY | \
+ GLOBAL2_SMI_OP_CLAUSE_22)
+#define GLOBAL2_SMI_OP_45_WRITE_ADDR ((0 << 10) | GLOBAL2_SMI_OP_BUSY)
+#define GLOBAL2_SMI_OP_45_WRITE_DATA ((1 << 10) | GLOBAL2_SMI_OP_BUSY)
+#define GLOBAL2_SMI_OP_45_READ_DATA ((2 << 10) | GLOBAL2_SMI_OP_BUSY)
+#define GLOBAL2_SMI_DATA 0x19
+#define GLOBAL2_SCRATCH_MISC 0x1a
+#define GLOBAL2_WDOG_CONTROL 0x1b
+#define GLOBAL2_QOS_WEIGHT 0x1c
+#define GLOBAL2_MISC 0x1d
+
+struct mv88e6xxx_priv_state {
+ /* When using multi-chip addressing, this mutex protects
+ * access to the indirect access registers. (In single-chip
+ * mode, this mutex is effectively useless.)
+ */
+ struct mutex smi_mutex;
+
+#ifdef CONFIG_NET_DSA_MV88E6XXX_NEED_PPU
+ /* Handles automatic disabling and re-enabling of the PHY
+ * polling unit.
+ */
+ struct mutex ppu_mutex;
+ int ppu_disabled;
+ struct work_struct ppu_work;
+ struct timer_list ppu_timer;
+#endif
+
+ /* This mutex serialises access to the statistics unit.
+ * Hold this mutex over snapshot + dump sequences.
+ */
+ struct mutex stats_mutex;
+
+ /* This mutex serializes phy access for chips with
+ * indirect phy addressing. It is unused for chips
+ * with direct phy access.
+ */
+ struct mutex phy_mutex;
+
+ /* This mutex serializes eeprom access for chips with
+ * eeprom support.
+ */
+ struct mutex eeprom_mutex;
+
+ int id; /* switch product id */
+ int num_ports; /* number of switch ports */
+
+ /* hw bridging */
+
+ u32 fid_mask;
+ u8 fid[DSA_MAX_PORTS];
+ u16 bridge_mask[DSA_MAX_PORTS];
+
+ unsigned long port_state_update_mask;
+ u8 port_state[DSA_MAX_PORTS];
+
+ struct work_struct bridge_work;
+};
+
+struct mv88e6xxx_hw_stat {
+ char string[ETH_GSTRING_LEN];
+ int sizeof_stat;
+ int reg;
+};
+
+int mv88e6xxx_switch_reset(struct dsa_switch *ds, bool ppu_active);
+int mv88e6xxx_setup_port_common(struct dsa_switch *ds, int port);
+int mv88e6xxx_setup_common(struct dsa_switch *ds);
+int __mv88e6xxx_reg_read(struct mii_bus *bus, int sw_addr, int addr, int reg);
+int mv88e6xxx_reg_read(struct dsa_switch *ds, int addr, int reg);
+int __mv88e6xxx_reg_write(struct mii_bus *bus, int sw_addr, int addr,
+ int reg, u16 val);
+int mv88e6xxx_reg_write(struct dsa_switch *ds, int addr, int reg, u16 val);
+int mv88e6xxx_config_prio(struct dsa_switch *ds);
+int mv88e6xxx_set_addr_direct(struct dsa_switch *ds, u8 *addr);
+int mv88e6xxx_set_addr_indirect(struct dsa_switch *ds, u8 *addr);
+int mv88e6xxx_phy_read(struct dsa_switch *ds, int port, int regnum);
+int mv88e6xxx_phy_write(struct dsa_switch *ds, int port, int regnum, u16 val);
+int mv88e6xxx_phy_read_indirect(struct dsa_switch *ds, int port, int regnum);
+int mv88e6xxx_phy_write_indirect(struct dsa_switch *ds, int port, int regnum,
+ u16 val);
+void mv88e6xxx_ppu_state_init(struct dsa_switch *ds);
+int mv88e6xxx_phy_read_ppu(struct dsa_switch *ds, int addr, int regnum);
+int mv88e6xxx_phy_write_ppu(struct dsa_switch *ds, int addr,
+ int regnum, u16 val);
+void mv88e6xxx_poll_link(struct dsa_switch *ds);
+void mv88e6xxx_get_strings(struct dsa_switch *ds, int port, uint8_t *data);
+void mv88e6xxx_get_ethtool_stats(struct dsa_switch *ds, int port,
+ uint64_t *data);
+int mv88e6xxx_get_sset_count(struct dsa_switch *ds);
+int mv88e6xxx_get_sset_count_basic(struct dsa_switch *ds);
+int mv88e6xxx_get_regs_len(struct dsa_switch *ds, int port);
+void mv88e6xxx_get_regs(struct dsa_switch *ds, int port,
+ struct ethtool_regs *regs, void *_p);
+int mv88e6xxx_get_temp(struct dsa_switch *ds, int *temp);
+int mv88e6xxx_phy_wait(struct dsa_switch *ds);
+int mv88e6xxx_eeprom_load_wait(struct dsa_switch *ds);
+int mv88e6xxx_eeprom_busy_wait(struct dsa_switch *ds);
+int mv88e6xxx_phy_read_indirect(struct dsa_switch *ds, int addr, int regnum);
+int mv88e6xxx_phy_write_indirect(struct dsa_switch *ds, int addr, int regnum,
+ u16 val);
+int mv88e6xxx_get_eee(struct dsa_switch *ds, int port, struct ethtool_eee *e);
+int mv88e6xxx_set_eee(struct dsa_switch *ds, int port,
+ struct phy_device *phydev, struct ethtool_eee *e);
+int mv88e6xxx_join_bridge(struct dsa_switch *ds, int port, u32 br_port_mask);
+int mv88e6xxx_leave_bridge(struct dsa_switch *ds, int port, u32 br_port_mask);
+int mv88e6xxx_port_stp_update(struct dsa_switch *ds, int port, u8 state);
+int mv88e6xxx_port_fdb_add(struct dsa_switch *ds, int port,
+ const unsigned char *addr, u16 vid);
+int mv88e6xxx_port_fdb_del(struct dsa_switch *ds, int port,
+ const unsigned char *addr, u16 vid);
+int mv88e6xxx_port_fdb_getnext(struct dsa_switch *ds, int port,
+ unsigned char *addr, bool *is_static);
+int mv88e6xxx_phy_page_read(struct dsa_switch *ds, int port, int page, int reg);
+int mv88e6xxx_phy_page_write(struct dsa_switch *ds, int port, int page,
+ int reg, int val);
+extern struct dsa_switch_driver mv88e6131_switch_driver;
+extern struct dsa_switch_driver mv88e6123_61_65_switch_driver;
+extern struct dsa_switch_driver mv88e6352_switch_driver;
+extern struct dsa_switch_driver mv88e6171_switch_driver;
+
+#define REG_READ(addr, reg) \
+ ({ \
+ int __ret; \
+ \
+ __ret = mv88e6xxx_reg_read(ds, addr, reg); \
+ if (__ret < 0) \
+ return __ret; \
+ __ret; \
+ })
+
+#define REG_WRITE(addr, reg, val) \
+ ({ \
+ int __ret; \
+ \
+ __ret = mv88e6xxx_reg_write(ds, addr, reg, val); \
+ if (__ret < 0) \
+ return __ret; \
+ })
+
+
+
+#endif