summaryrefslogtreecommitdiffstats
path: root/kernel/drivers/net/dsa/mv88e6123_61_65.c
diff options
context:
space:
mode:
Diffstat (limited to 'kernel/drivers/net/dsa/mv88e6123_61_65.c')
-rw-r--r--kernel/drivers/net/dsa/mv88e6123_61_65.c301
1 files changed, 301 insertions, 0 deletions
diff --git a/kernel/drivers/net/dsa/mv88e6123_61_65.c b/kernel/drivers/net/dsa/mv88e6123_61_65.c
new file mode 100644
index 000000000..b4af6d5af
--- /dev/null
+++ b/kernel/drivers/net/dsa/mv88e6123_61_65.c
@@ -0,0 +1,301 @@
+/*
+ * net/dsa/mv88e6123_61_65.c - Marvell 88e6123/6161/6165 switch chip support
+ * Copyright (c) 2008-2009 Marvell Semiconductor
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/delay.h>
+#include <linux/jiffies.h>
+#include <linux/list.h>
+#include <linux/module.h>
+#include <linux/netdevice.h>
+#include <linux/phy.h>
+#include <net/dsa.h>
+#include "mv88e6xxx.h"
+
+static char *mv88e6123_61_65_probe(struct device *host_dev, int sw_addr)
+{
+ struct mii_bus *bus = dsa_host_dev_to_mii_bus(host_dev);
+ int ret;
+
+ if (bus == NULL)
+ return NULL;
+
+ ret = __mv88e6xxx_reg_read(bus, sw_addr, REG_PORT(0), PORT_SWITCH_ID);
+ if (ret >= 0) {
+ if (ret == PORT_SWITCH_ID_6123_A1)
+ return "Marvell 88E6123 (A1)";
+ if (ret == PORT_SWITCH_ID_6123_A2)
+ return "Marvell 88E6123 (A2)";
+ if ((ret & 0xfff0) == PORT_SWITCH_ID_6123)
+ return "Marvell 88E6123";
+
+ if (ret == PORT_SWITCH_ID_6161_A1)
+ return "Marvell 88E6161 (A1)";
+ if (ret == PORT_SWITCH_ID_6161_A2)
+ return "Marvell 88E6161 (A2)";
+ if ((ret & 0xfff0) == PORT_SWITCH_ID_6161)
+ return "Marvell 88E6161";
+
+ if (ret == PORT_SWITCH_ID_6165_A1)
+ return "Marvell 88E6165 (A1)";
+ if (ret == PORT_SWITCH_ID_6165_A2)
+ return "Marvell 88e6165 (A2)";
+ if ((ret & 0xfff0) == PORT_SWITCH_ID_6165)
+ return "Marvell 88E6165";
+ }
+
+ return NULL;
+}
+
+static int mv88e6123_61_65_setup_global(struct dsa_switch *ds)
+{
+ int ret;
+ int i;
+
+ /* Disable the PHY polling unit (since there won't be any
+ * external PHYs to poll), don't discard packets with
+ * excessive collisions, and mask all interrupt sources.
+ */
+ REG_WRITE(REG_GLOBAL, 0x04, 0x0000);
+
+ /* Set the default address aging time to 5 minutes, and
+ * enable address learn messages to be sent to all message
+ * ports.
+ */
+ REG_WRITE(REG_GLOBAL, 0x0a, 0x0148);
+
+ /* Configure the priority mapping registers. */
+ ret = mv88e6xxx_config_prio(ds);
+ if (ret < 0)
+ return ret;
+
+ /* Configure the upstream port, and configure the upstream
+ * port as the port to which ingress and egress monitor frames
+ * are to be sent.
+ */
+ REG_WRITE(REG_GLOBAL, 0x1a, (dsa_upstream_port(ds) * 0x1110));
+
+ /* Disable remote management for now, and set the switch's
+ * DSA device number.
+ */
+ REG_WRITE(REG_GLOBAL, 0x1c, ds->index & 0x1f);
+
+ /* Send all frames with destination addresses matching
+ * 01:80:c2:00:00:2x to the CPU port.
+ */
+ REG_WRITE(REG_GLOBAL2, 0x02, 0xffff);
+
+ /* Send all frames with destination addresses matching
+ * 01:80:c2:00:00:0x to the CPU port.
+ */
+ REG_WRITE(REG_GLOBAL2, 0x03, 0xffff);
+
+ /* Disable the loopback filter, disable flow control
+ * messages, disable flood broadcast override, disable
+ * removing of provider tags, disable ATU age violation
+ * interrupts, disable tag flow control, force flow
+ * control priority to the highest, and send all special
+ * multicast frames to the CPU at the highest priority.
+ */
+ REG_WRITE(REG_GLOBAL2, 0x05, 0x00ff);
+
+ /* Program the DSA routing table. */
+ for (i = 0; i < 32; i++) {
+ int nexthop;
+
+ nexthop = 0x1f;
+ if (i != ds->index && i < ds->dst->pd->nr_chips)
+ nexthop = ds->pd->rtable[i] & 0x1f;
+
+ REG_WRITE(REG_GLOBAL2, 0x06, 0x8000 | (i << 8) | nexthop);
+ }
+
+ /* Clear all trunk masks. */
+ for (i = 0; i < 8; i++)
+ REG_WRITE(REG_GLOBAL2, 0x07, 0x8000 | (i << 12) | 0xff);
+
+ /* Clear all trunk mappings. */
+ for (i = 0; i < 16; i++)
+ REG_WRITE(REG_GLOBAL2, 0x08, 0x8000 | (i << 11));
+
+ /* Disable ingress rate limiting by resetting all ingress
+ * rate limit registers to their initial state.
+ */
+ for (i = 0; i < 6; i++)
+ REG_WRITE(REG_GLOBAL2, 0x09, 0x9000 | (i << 8));
+
+ /* Initialise cross-chip port VLAN table to reset defaults. */
+ REG_WRITE(REG_GLOBAL2, 0x0b, 0x9000);
+
+ /* Clear the priority override table. */
+ for (i = 0; i < 16; i++)
+ REG_WRITE(REG_GLOBAL2, 0x0f, 0x8000 | (i << 8));
+
+ /* @@@ initialise AVB (22/23) watchdog (27) sdet (29) registers */
+
+ return 0;
+}
+
+static int mv88e6123_61_65_setup_port(struct dsa_switch *ds, int p)
+{
+ int addr = REG_PORT(p);
+ u16 val;
+
+ /* MAC Forcing register: don't force link, speed, duplex
+ * or flow control state to any particular values on physical
+ * ports, but force the CPU port and all DSA ports to 1000 Mb/s
+ * full duplex.
+ */
+ if (dsa_is_cpu_port(ds, p) || ds->dsa_port_mask & (1 << p))
+ REG_WRITE(addr, 0x01, 0x003e);
+ else
+ REG_WRITE(addr, 0x01, 0x0003);
+
+ /* Do not limit the period of time that this port can be
+ * paused for by the remote end or the period of time that
+ * this port can pause the remote end.
+ */
+ REG_WRITE(addr, 0x02, 0x0000);
+
+ /* Port Control: disable Drop-on-Unlock, disable Drop-on-Lock,
+ * disable Header mode, enable IGMP/MLD snooping, disable VLAN
+ * tunneling, determine priority by looking at 802.1p and IP
+ * priority fields (IP prio has precedence), and set STP state
+ * to Forwarding.
+ *
+ * If this is the CPU link, use DSA or EDSA tagging depending
+ * on which tagging mode was configured.
+ *
+ * If this is a link to another switch, use DSA tagging mode.
+ *
+ * If this is the upstream port for this switch, enable
+ * forwarding of unknown unicasts and multicasts.
+ */
+ val = 0x0433;
+ if (dsa_is_cpu_port(ds, p)) {
+ if (ds->dst->tag_protocol == DSA_TAG_PROTO_EDSA)
+ val |= 0x3300;
+ else
+ val |= 0x0100;
+ }
+ if (ds->dsa_port_mask & (1 << p))
+ val |= 0x0100;
+ if (p == dsa_upstream_port(ds))
+ val |= 0x000c;
+ REG_WRITE(addr, 0x04, val);
+
+ /* Port Control 2: don't force a good FCS, set the maximum
+ * frame size to 10240 bytes, don't let the switch add or
+ * strip 802.1q tags, don't discard tagged or untagged frames
+ * on this port, do a destination address lookup on all
+ * received packets as usual, disable ARP mirroring and don't
+ * send a copy of all transmitted/received frames on this port
+ * to the CPU.
+ */
+ REG_WRITE(addr, 0x08, 0x2080);
+
+ /* Egress rate control: disable egress rate control. */
+ REG_WRITE(addr, 0x09, 0x0001);
+
+ /* Egress rate control 2: disable egress rate control. */
+ REG_WRITE(addr, 0x0a, 0x0000);
+
+ /* Port Association Vector: when learning source addresses
+ * of packets, add the address to the address database using
+ * a port bitmap that has only the bit for this port set and
+ * the other bits clear.
+ */
+ REG_WRITE(addr, 0x0b, 1 << p);
+
+ /* Port ATU control: disable limiting the number of address
+ * database entries that this port is allowed to use.
+ */
+ REG_WRITE(addr, 0x0c, 0x0000);
+
+ /* Priority Override: disable DA, SA and VTU priority override. */
+ REG_WRITE(addr, 0x0d, 0x0000);
+
+ /* Port Ethertype: use the Ethertype DSA Ethertype value. */
+ REG_WRITE(addr, 0x0f, ETH_P_EDSA);
+
+ /* Tag Remap: use an identity 802.1p prio -> switch prio
+ * mapping.
+ */
+ REG_WRITE(addr, 0x18, 0x3210);
+
+ /* Tag Remap 2: use an identity 802.1p prio -> switch prio
+ * mapping.
+ */
+ REG_WRITE(addr, 0x19, 0x7654);
+
+ return mv88e6xxx_setup_port_common(ds, p);
+}
+
+static int mv88e6123_61_65_setup(struct dsa_switch *ds)
+{
+ struct mv88e6xxx_priv_state *ps = ds_to_priv(ds);
+ int i;
+ int ret;
+
+ ret = mv88e6xxx_setup_common(ds);
+ if (ret < 0)
+ return ret;
+
+ switch (ps->id) {
+ case PORT_SWITCH_ID_6123:
+ ps->num_ports = 3;
+ break;
+ case PORT_SWITCH_ID_6161:
+ case PORT_SWITCH_ID_6165:
+ ps->num_ports = 6;
+ break;
+ default:
+ return -ENODEV;
+ }
+
+ ret = mv88e6xxx_switch_reset(ds, false);
+ if (ret < 0)
+ return ret;
+
+ /* @@@ initialise vtu and atu */
+
+ ret = mv88e6123_61_65_setup_global(ds);
+ if (ret < 0)
+ return ret;
+
+ for (i = 0; i < ps->num_ports; i++) {
+ ret = mv88e6123_61_65_setup_port(ds, i);
+ if (ret < 0)
+ return ret;
+ }
+
+ return 0;
+}
+
+struct dsa_switch_driver mv88e6123_61_65_switch_driver = {
+ .tag_protocol = DSA_TAG_PROTO_EDSA,
+ .priv_size = sizeof(struct mv88e6xxx_priv_state),
+ .probe = mv88e6123_61_65_probe,
+ .setup = mv88e6123_61_65_setup,
+ .set_addr = mv88e6xxx_set_addr_indirect,
+ .phy_read = mv88e6xxx_phy_read,
+ .phy_write = mv88e6xxx_phy_write,
+ .poll_link = mv88e6xxx_poll_link,
+ .get_strings = mv88e6xxx_get_strings,
+ .get_ethtool_stats = mv88e6xxx_get_ethtool_stats,
+ .get_sset_count = mv88e6xxx_get_sset_count,
+#ifdef CONFIG_NET_DSA_HWMON
+ .get_temp = mv88e6xxx_get_temp,
+#endif
+ .get_regs_len = mv88e6xxx_get_regs_len,
+ .get_regs = mv88e6xxx_get_regs,
+};
+
+MODULE_ALIAS("platform:mv88e6123");
+MODULE_ALIAS("platform:mv88e6161");
+MODULE_ALIAS("platform:mv88e6165");