summaryrefslogtreecommitdiffstats
path: root/kernel/drivers/net/can/c_can
diff options
context:
space:
mode:
Diffstat (limited to 'kernel/drivers/net/can/c_can')
-rw-r--r--kernel/drivers/net/can/c_can/Kconfig23
-rw-r--r--kernel/drivers/net/can/c_can/Makefile7
-rw-r--r--kernel/drivers/net/can/c_can/c_can.c1290
-rw-r--r--kernel/drivers/net/can/c_can/c_can.h228
-rw-r--r--kernel/drivers/net/can/c_can/c_can_pci.c293
-rw-r--r--kernel/drivers/net/can/c_can/c_can_platform.c494
6 files changed, 2335 insertions, 0 deletions
diff --git a/kernel/drivers/net/can/c_can/Kconfig b/kernel/drivers/net/can/c_can/Kconfig
new file mode 100644
index 000000000..61ffc12d8
--- /dev/null
+++ b/kernel/drivers/net/can/c_can/Kconfig
@@ -0,0 +1,23 @@
+menuconfig CAN_C_CAN
+ tristate "Bosch C_CAN/D_CAN devices"
+ depends on HAS_IOMEM
+
+if CAN_C_CAN
+
+config CAN_C_CAN_PLATFORM
+ tristate "Generic Platform Bus based C_CAN/D_CAN driver"
+ ---help---
+ This driver adds support for the C_CAN/D_CAN chips connected
+ to the "platform bus" (Linux abstraction for directly to the
+ processor attached devices) which can be found on various
+ boards from ST Microelectronics (http://www.st.com) like the
+ SPEAr1310 and SPEAr320 evaluation boards & TI (www.ti.com)
+ boards like am335x, dm814x, dm813x and dm811x.
+
+config CAN_C_CAN_PCI
+ tristate "Generic PCI Bus based C_CAN/D_CAN driver"
+ depends on PCI
+ ---help---
+ This driver adds support for the C_CAN/D_CAN chips connected
+ to the PCI bus.
+endif
diff --git a/kernel/drivers/net/can/c_can/Makefile b/kernel/drivers/net/can/c_can/Makefile
new file mode 100644
index 000000000..9fdc678b5
--- /dev/null
+++ b/kernel/drivers/net/can/c_can/Makefile
@@ -0,0 +1,7 @@
+#
+# Makefile for the Bosch C_CAN controller drivers.
+#
+
+obj-$(CONFIG_CAN_C_CAN) += c_can.o
+obj-$(CONFIG_CAN_C_CAN_PLATFORM) += c_can_platform.o
+obj-$(CONFIG_CAN_C_CAN_PCI) += c_can_pci.o
diff --git a/kernel/drivers/net/can/c_can/c_can.c b/kernel/drivers/net/can/c_can/c_can.c
new file mode 100644
index 000000000..041525d25
--- /dev/null
+++ b/kernel/drivers/net/can/c_can/c_can.c
@@ -0,0 +1,1290 @@
+/*
+ * CAN bus driver for Bosch C_CAN controller
+ *
+ * Copyright (C) 2010 ST Microelectronics
+ * Bhupesh Sharma <bhupesh.sharma@st.com>
+ *
+ * Borrowed heavily from the C_CAN driver originally written by:
+ * Copyright (C) 2007
+ * - Sascha Hauer, Marc Kleine-Budde, Pengutronix <s.hauer@pengutronix.de>
+ * - Simon Kallweit, intefo AG <simon.kallweit@intefo.ch>
+ *
+ * TX and RX NAPI implementation has been borrowed from at91 CAN driver
+ * written by:
+ * Copyright
+ * (C) 2007 by Hans J. Koch <hjk@hansjkoch.de>
+ * (C) 2008, 2009 by Marc Kleine-Budde <kernel@pengutronix.de>
+ *
+ * Bosch C_CAN controller is compliant to CAN protocol version 2.0 part A and B.
+ * Bosch C_CAN user manual can be obtained from:
+ * http://www.semiconductors.bosch.de/media/en/pdf/ipmodules_1/c_can/
+ * users_manual_c_can.pdf
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/netdevice.h>
+#include <linux/if_arp.h>
+#include <linux/if_ether.h>
+#include <linux/list.h>
+#include <linux/io.h>
+#include <linux/pm_runtime.h>
+#include <linux/pinctrl/consumer.h>
+
+#include <linux/can.h>
+#include <linux/can/dev.h>
+#include <linux/can/error.h>
+#include <linux/can/led.h>
+
+#include "c_can.h"
+
+/* Number of interface registers */
+#define IF_ENUM_REG_LEN 11
+#define C_CAN_IFACE(reg, iface) (C_CAN_IF1_##reg + (iface) * IF_ENUM_REG_LEN)
+
+/* control extension register D_CAN specific */
+#define CONTROL_EX_PDR BIT(8)
+
+/* control register */
+#define CONTROL_TEST BIT(7)
+#define CONTROL_CCE BIT(6)
+#define CONTROL_DISABLE_AR BIT(5)
+#define CONTROL_ENABLE_AR (0 << 5)
+#define CONTROL_EIE BIT(3)
+#define CONTROL_SIE BIT(2)
+#define CONTROL_IE BIT(1)
+#define CONTROL_INIT BIT(0)
+
+#define CONTROL_IRQMSK (CONTROL_EIE | CONTROL_IE | CONTROL_SIE)
+
+/* test register */
+#define TEST_RX BIT(7)
+#define TEST_TX1 BIT(6)
+#define TEST_TX2 BIT(5)
+#define TEST_LBACK BIT(4)
+#define TEST_SILENT BIT(3)
+#define TEST_BASIC BIT(2)
+
+/* status register */
+#define STATUS_PDA BIT(10)
+#define STATUS_BOFF BIT(7)
+#define STATUS_EWARN BIT(6)
+#define STATUS_EPASS BIT(5)
+#define STATUS_RXOK BIT(4)
+#define STATUS_TXOK BIT(3)
+
+/* error counter register */
+#define ERR_CNT_TEC_MASK 0xff
+#define ERR_CNT_TEC_SHIFT 0
+#define ERR_CNT_REC_SHIFT 8
+#define ERR_CNT_REC_MASK (0x7f << ERR_CNT_REC_SHIFT)
+#define ERR_CNT_RP_SHIFT 15
+#define ERR_CNT_RP_MASK (0x1 << ERR_CNT_RP_SHIFT)
+
+/* bit-timing register */
+#define BTR_BRP_MASK 0x3f
+#define BTR_BRP_SHIFT 0
+#define BTR_SJW_SHIFT 6
+#define BTR_SJW_MASK (0x3 << BTR_SJW_SHIFT)
+#define BTR_TSEG1_SHIFT 8
+#define BTR_TSEG1_MASK (0xf << BTR_TSEG1_SHIFT)
+#define BTR_TSEG2_SHIFT 12
+#define BTR_TSEG2_MASK (0x7 << BTR_TSEG2_SHIFT)
+
+/* brp extension register */
+#define BRP_EXT_BRPE_MASK 0x0f
+#define BRP_EXT_BRPE_SHIFT 0
+
+/* IFx command request */
+#define IF_COMR_BUSY BIT(15)
+
+/* IFx command mask */
+#define IF_COMM_WR BIT(7)
+#define IF_COMM_MASK BIT(6)
+#define IF_COMM_ARB BIT(5)
+#define IF_COMM_CONTROL BIT(4)
+#define IF_COMM_CLR_INT_PND BIT(3)
+#define IF_COMM_TXRQST BIT(2)
+#define IF_COMM_CLR_NEWDAT IF_COMM_TXRQST
+#define IF_COMM_DATAA BIT(1)
+#define IF_COMM_DATAB BIT(0)
+
+/* TX buffer setup */
+#define IF_COMM_TX (IF_COMM_ARB | IF_COMM_CONTROL | \
+ IF_COMM_TXRQST | \
+ IF_COMM_DATAA | IF_COMM_DATAB)
+
+/* For the low buffers we clear the interrupt bit, but keep newdat */
+#define IF_COMM_RCV_LOW (IF_COMM_MASK | IF_COMM_ARB | \
+ IF_COMM_CONTROL | IF_COMM_CLR_INT_PND | \
+ IF_COMM_DATAA | IF_COMM_DATAB)
+
+/* For the high buffers we clear the interrupt bit and newdat */
+#define IF_COMM_RCV_HIGH (IF_COMM_RCV_LOW | IF_COMM_CLR_NEWDAT)
+
+
+/* Receive setup of message objects */
+#define IF_COMM_RCV_SETUP (IF_COMM_MASK | IF_COMM_ARB | IF_COMM_CONTROL)
+
+/* Invalidation of message objects */
+#define IF_COMM_INVAL (IF_COMM_ARB | IF_COMM_CONTROL)
+
+/* IFx arbitration */
+#define IF_ARB_MSGVAL BIT(31)
+#define IF_ARB_MSGXTD BIT(30)
+#define IF_ARB_TRANSMIT BIT(29)
+
+/* IFx message control */
+#define IF_MCONT_NEWDAT BIT(15)
+#define IF_MCONT_MSGLST BIT(14)
+#define IF_MCONT_INTPND BIT(13)
+#define IF_MCONT_UMASK BIT(12)
+#define IF_MCONT_TXIE BIT(11)
+#define IF_MCONT_RXIE BIT(10)
+#define IF_MCONT_RMTEN BIT(9)
+#define IF_MCONT_TXRQST BIT(8)
+#define IF_MCONT_EOB BIT(7)
+#define IF_MCONT_DLC_MASK 0xf
+
+#define IF_MCONT_RCV (IF_MCONT_RXIE | IF_MCONT_UMASK)
+#define IF_MCONT_RCV_EOB (IF_MCONT_RCV | IF_MCONT_EOB)
+
+#define IF_MCONT_TX (IF_MCONT_TXIE | IF_MCONT_EOB)
+
+/*
+ * Use IF1 for RX and IF2 for TX
+ */
+#define IF_RX 0
+#define IF_TX 1
+
+/* minimum timeout for checking BUSY status */
+#define MIN_TIMEOUT_VALUE 6
+
+/* Wait for ~1 sec for INIT bit */
+#define INIT_WAIT_MS 1000
+
+/* napi related */
+#define C_CAN_NAPI_WEIGHT C_CAN_MSG_OBJ_RX_NUM
+
+/* c_can lec values */
+enum c_can_lec_type {
+ LEC_NO_ERROR = 0,
+ LEC_STUFF_ERROR,
+ LEC_FORM_ERROR,
+ LEC_ACK_ERROR,
+ LEC_BIT1_ERROR,
+ LEC_BIT0_ERROR,
+ LEC_CRC_ERROR,
+ LEC_UNUSED,
+ LEC_MASK = LEC_UNUSED,
+};
+
+/*
+ * c_can error types:
+ * Bus errors (BUS_OFF, ERROR_WARNING, ERROR_PASSIVE) are supported
+ */
+enum c_can_bus_error_types {
+ C_CAN_NO_ERROR = 0,
+ C_CAN_BUS_OFF,
+ C_CAN_ERROR_WARNING,
+ C_CAN_ERROR_PASSIVE,
+};
+
+static const struct can_bittiming_const c_can_bittiming_const = {
+ .name = KBUILD_MODNAME,
+ .tseg1_min = 2, /* Time segment 1 = prop_seg + phase_seg1 */
+ .tseg1_max = 16,
+ .tseg2_min = 1, /* Time segment 2 = phase_seg2 */
+ .tseg2_max = 8,
+ .sjw_max = 4,
+ .brp_min = 1,
+ .brp_max = 1024, /* 6-bit BRP field + 4-bit BRPE field*/
+ .brp_inc = 1,
+};
+
+static inline void c_can_pm_runtime_enable(const struct c_can_priv *priv)
+{
+ if (priv->device)
+ pm_runtime_enable(priv->device);
+}
+
+static inline void c_can_pm_runtime_disable(const struct c_can_priv *priv)
+{
+ if (priv->device)
+ pm_runtime_disable(priv->device);
+}
+
+static inline void c_can_pm_runtime_get_sync(const struct c_can_priv *priv)
+{
+ if (priv->device)
+ pm_runtime_get_sync(priv->device);
+}
+
+static inline void c_can_pm_runtime_put_sync(const struct c_can_priv *priv)
+{
+ if (priv->device)
+ pm_runtime_put_sync(priv->device);
+}
+
+static inline void c_can_reset_ram(const struct c_can_priv *priv, bool enable)
+{
+ if (priv->raminit)
+ priv->raminit(priv, enable);
+}
+
+static void c_can_irq_control(struct c_can_priv *priv, bool enable)
+{
+ u32 ctrl = priv->read_reg(priv, C_CAN_CTRL_REG) & ~CONTROL_IRQMSK;
+
+ if (enable)
+ ctrl |= CONTROL_IRQMSK;
+
+ priv->write_reg(priv, C_CAN_CTRL_REG, ctrl);
+}
+
+static void c_can_obj_update(struct net_device *dev, int iface, u32 cmd, u32 obj)
+{
+ struct c_can_priv *priv = netdev_priv(dev);
+ int cnt, reg = C_CAN_IFACE(COMREQ_REG, iface);
+
+ priv->write_reg32(priv, reg, (cmd << 16) | obj);
+
+ for (cnt = MIN_TIMEOUT_VALUE; cnt; cnt--) {
+ if (!(priv->read_reg(priv, reg) & IF_COMR_BUSY))
+ return;
+ udelay(1);
+ }
+ netdev_err(dev, "Updating object timed out\n");
+
+}
+
+static inline void c_can_object_get(struct net_device *dev, int iface,
+ u32 obj, u32 cmd)
+{
+ c_can_obj_update(dev, iface, cmd, obj);
+}
+
+static inline void c_can_object_put(struct net_device *dev, int iface,
+ u32 obj, u32 cmd)
+{
+ c_can_obj_update(dev, iface, cmd | IF_COMM_WR, obj);
+}
+
+/*
+ * Note: According to documentation clearing TXIE while MSGVAL is set
+ * is not allowed, but works nicely on C/DCAN. And that lowers the I/O
+ * load significantly.
+ */
+static void c_can_inval_tx_object(struct net_device *dev, int iface, int obj)
+{
+ struct c_can_priv *priv = netdev_priv(dev);
+
+ priv->write_reg(priv, C_CAN_IFACE(MSGCTRL_REG, iface), 0);
+ c_can_object_put(dev, iface, obj, IF_COMM_INVAL);
+}
+
+static void c_can_inval_msg_object(struct net_device *dev, int iface, int obj)
+{
+ struct c_can_priv *priv = netdev_priv(dev);
+
+ priv->write_reg(priv, C_CAN_IFACE(ARB1_REG, iface), 0);
+ priv->write_reg(priv, C_CAN_IFACE(ARB2_REG, iface), 0);
+ c_can_inval_tx_object(dev, iface, obj);
+}
+
+static void c_can_setup_tx_object(struct net_device *dev, int iface,
+ struct can_frame *frame, int idx)
+{
+ struct c_can_priv *priv = netdev_priv(dev);
+ u16 ctrl = IF_MCONT_TX | frame->can_dlc;
+ bool rtr = frame->can_id & CAN_RTR_FLAG;
+ u32 arb = IF_ARB_MSGVAL;
+ int i;
+
+ if (frame->can_id & CAN_EFF_FLAG) {
+ arb |= frame->can_id & CAN_EFF_MASK;
+ arb |= IF_ARB_MSGXTD;
+ } else {
+ arb |= (frame->can_id & CAN_SFF_MASK) << 18;
+ }
+
+ if (!rtr)
+ arb |= IF_ARB_TRANSMIT;
+
+ /*
+ * If we change the DIR bit, we need to invalidate the buffer
+ * first, i.e. clear the MSGVAL flag in the arbiter.
+ */
+ if (rtr != (bool)test_bit(idx, &priv->tx_dir)) {
+ u32 obj = idx + C_CAN_MSG_OBJ_TX_FIRST;
+
+ c_can_inval_msg_object(dev, iface, obj);
+ change_bit(idx, &priv->tx_dir);
+ }
+
+ priv->write_reg32(priv, C_CAN_IFACE(ARB1_REG, iface), arb);
+
+ priv->write_reg(priv, C_CAN_IFACE(MSGCTRL_REG, iface), ctrl);
+
+ for (i = 0; i < frame->can_dlc; i += 2) {
+ priv->write_reg(priv, C_CAN_IFACE(DATA1_REG, iface) + i / 2,
+ frame->data[i] | (frame->data[i + 1] << 8));
+ }
+}
+
+static inline void c_can_activate_all_lower_rx_msg_obj(struct net_device *dev,
+ int iface)
+{
+ int i;
+
+ for (i = C_CAN_MSG_OBJ_RX_FIRST; i <= C_CAN_MSG_RX_LOW_LAST; i++)
+ c_can_object_get(dev, iface, i, IF_COMM_CLR_NEWDAT);
+}
+
+static int c_can_handle_lost_msg_obj(struct net_device *dev,
+ int iface, int objno, u32 ctrl)
+{
+ struct net_device_stats *stats = &dev->stats;
+ struct c_can_priv *priv = netdev_priv(dev);
+ struct can_frame *frame;
+ struct sk_buff *skb;
+
+ ctrl &= ~(IF_MCONT_MSGLST | IF_MCONT_INTPND | IF_MCONT_NEWDAT);
+ priv->write_reg(priv, C_CAN_IFACE(MSGCTRL_REG, iface), ctrl);
+ c_can_object_put(dev, iface, objno, IF_COMM_CONTROL);
+
+ stats->rx_errors++;
+ stats->rx_over_errors++;
+
+ /* create an error msg */
+ skb = alloc_can_err_skb(dev, &frame);
+ if (unlikely(!skb))
+ return 0;
+
+ frame->can_id |= CAN_ERR_CRTL;
+ frame->data[1] = CAN_ERR_CRTL_RX_OVERFLOW;
+
+ netif_receive_skb(skb);
+ return 1;
+}
+
+static int c_can_read_msg_object(struct net_device *dev, int iface, u32 ctrl)
+{
+ struct net_device_stats *stats = &dev->stats;
+ struct c_can_priv *priv = netdev_priv(dev);
+ struct can_frame *frame;
+ struct sk_buff *skb;
+ u32 arb, data;
+
+ skb = alloc_can_skb(dev, &frame);
+ if (!skb) {
+ stats->rx_dropped++;
+ return -ENOMEM;
+ }
+
+ frame->can_dlc = get_can_dlc(ctrl & 0x0F);
+
+ arb = priv->read_reg32(priv, C_CAN_IFACE(ARB1_REG, iface));
+
+ if (arb & IF_ARB_MSGXTD)
+ frame->can_id = (arb & CAN_EFF_MASK) | CAN_EFF_FLAG;
+ else
+ frame->can_id = (arb >> 18) & CAN_SFF_MASK;
+
+ if (arb & IF_ARB_TRANSMIT) {
+ frame->can_id |= CAN_RTR_FLAG;
+ } else {
+ int i, dreg = C_CAN_IFACE(DATA1_REG, iface);
+
+ for (i = 0; i < frame->can_dlc; i += 2, dreg ++) {
+ data = priv->read_reg(priv, dreg);
+ frame->data[i] = data;
+ frame->data[i + 1] = data >> 8;
+ }
+ }
+
+ stats->rx_packets++;
+ stats->rx_bytes += frame->can_dlc;
+
+ netif_receive_skb(skb);
+ return 0;
+}
+
+static void c_can_setup_receive_object(struct net_device *dev, int iface,
+ u32 obj, u32 mask, u32 id, u32 mcont)
+{
+ struct c_can_priv *priv = netdev_priv(dev);
+
+ mask |= BIT(29);
+ priv->write_reg32(priv, C_CAN_IFACE(MASK1_REG, iface), mask);
+
+ id |= IF_ARB_MSGVAL;
+ priv->write_reg32(priv, C_CAN_IFACE(ARB1_REG, iface), id);
+
+ priv->write_reg(priv, C_CAN_IFACE(MSGCTRL_REG, iface), mcont);
+ c_can_object_put(dev, iface, obj, IF_COMM_RCV_SETUP);
+}
+
+static netdev_tx_t c_can_start_xmit(struct sk_buff *skb,
+ struct net_device *dev)
+{
+ struct can_frame *frame = (struct can_frame *)skb->data;
+ struct c_can_priv *priv = netdev_priv(dev);
+ u32 idx, obj;
+
+ if (can_dropped_invalid_skb(dev, skb))
+ return NETDEV_TX_OK;
+ /*
+ * This is not a FIFO. C/D_CAN sends out the buffers
+ * prioritized. The lowest buffer number wins.
+ */
+ idx = fls(atomic_read(&priv->tx_active));
+ obj = idx + C_CAN_MSG_OBJ_TX_FIRST;
+
+ /* If this is the last buffer, stop the xmit queue */
+ if (idx == C_CAN_MSG_OBJ_TX_NUM - 1)
+ netif_stop_queue(dev);
+ /*
+ * Store the message in the interface so we can call
+ * can_put_echo_skb(). We must do this before we enable
+ * transmit as we might race against do_tx().
+ */
+ c_can_setup_tx_object(dev, IF_TX, frame, idx);
+ priv->dlc[idx] = frame->can_dlc;
+ can_put_echo_skb(skb, dev, idx);
+
+ /* Update the active bits */
+ atomic_add((1 << idx), &priv->tx_active);
+ /* Start transmission */
+ c_can_object_put(dev, IF_TX, obj, IF_COMM_TX);
+
+ return NETDEV_TX_OK;
+}
+
+static int c_can_wait_for_ctrl_init(struct net_device *dev,
+ struct c_can_priv *priv, u32 init)
+{
+ int retry = 0;
+
+ while (init != (priv->read_reg(priv, C_CAN_CTRL_REG) & CONTROL_INIT)) {
+ udelay(10);
+ if (retry++ > 1000) {
+ netdev_err(dev, "CCTRL: set CONTROL_INIT failed\n");
+ return -EIO;
+ }
+ }
+ return 0;
+}
+
+static int c_can_set_bittiming(struct net_device *dev)
+{
+ unsigned int reg_btr, reg_brpe, ctrl_save;
+ u8 brp, brpe, sjw, tseg1, tseg2;
+ u32 ten_bit_brp;
+ struct c_can_priv *priv = netdev_priv(dev);
+ const struct can_bittiming *bt = &priv->can.bittiming;
+ int res;
+
+ /* c_can provides a 6-bit brp and 4-bit brpe fields */
+ ten_bit_brp = bt->brp - 1;
+ brp = ten_bit_brp & BTR_BRP_MASK;
+ brpe = ten_bit_brp >> 6;
+
+ sjw = bt->sjw - 1;
+ tseg1 = bt->prop_seg + bt->phase_seg1 - 1;
+ tseg2 = bt->phase_seg2 - 1;
+ reg_btr = brp | (sjw << BTR_SJW_SHIFT) | (tseg1 << BTR_TSEG1_SHIFT) |
+ (tseg2 << BTR_TSEG2_SHIFT);
+ reg_brpe = brpe & BRP_EXT_BRPE_MASK;
+
+ netdev_info(dev,
+ "setting BTR=%04x BRPE=%04x\n", reg_btr, reg_brpe);
+
+ ctrl_save = priv->read_reg(priv, C_CAN_CTRL_REG);
+ ctrl_save &= ~CONTROL_INIT;
+ priv->write_reg(priv, C_CAN_CTRL_REG, CONTROL_CCE | CONTROL_INIT);
+ res = c_can_wait_for_ctrl_init(dev, priv, CONTROL_INIT);
+ if (res)
+ return res;
+
+ priv->write_reg(priv, C_CAN_BTR_REG, reg_btr);
+ priv->write_reg(priv, C_CAN_BRPEXT_REG, reg_brpe);
+ priv->write_reg(priv, C_CAN_CTRL_REG, ctrl_save);
+
+ return c_can_wait_for_ctrl_init(dev, priv, 0);
+}
+
+/*
+ * Configure C_CAN message objects for Tx and Rx purposes:
+ * C_CAN provides a total of 32 message objects that can be configured
+ * either for Tx or Rx purposes. Here the first 16 message objects are used as
+ * a reception FIFO. The end of reception FIFO is signified by the EoB bit
+ * being SET. The remaining 16 message objects are kept aside for Tx purposes.
+ * See user guide document for further details on configuring message
+ * objects.
+ */
+static void c_can_configure_msg_objects(struct net_device *dev)
+{
+ int i;
+
+ /* first invalidate all message objects */
+ for (i = C_CAN_MSG_OBJ_RX_FIRST; i <= C_CAN_NO_OF_OBJECTS; i++)
+ c_can_inval_msg_object(dev, IF_RX, i);
+
+ /* setup receive message objects */
+ for (i = C_CAN_MSG_OBJ_RX_FIRST; i < C_CAN_MSG_OBJ_RX_LAST; i++)
+ c_can_setup_receive_object(dev, IF_RX, i, 0, 0, IF_MCONT_RCV);
+
+ c_can_setup_receive_object(dev, IF_RX, C_CAN_MSG_OBJ_RX_LAST, 0, 0,
+ IF_MCONT_RCV_EOB);
+}
+
+/*
+ * Configure C_CAN chip:
+ * - enable/disable auto-retransmission
+ * - set operating mode
+ * - configure message objects
+ */
+static int c_can_chip_config(struct net_device *dev)
+{
+ struct c_can_priv *priv = netdev_priv(dev);
+
+ /* enable automatic retransmission */
+ priv->write_reg(priv, C_CAN_CTRL_REG, CONTROL_ENABLE_AR);
+
+ if ((priv->can.ctrlmode & CAN_CTRLMODE_LISTENONLY) &&
+ (priv->can.ctrlmode & CAN_CTRLMODE_LOOPBACK)) {
+ /* loopback + silent mode : useful for hot self-test */
+ priv->write_reg(priv, C_CAN_CTRL_REG, CONTROL_TEST);
+ priv->write_reg(priv, C_CAN_TEST_REG, TEST_LBACK | TEST_SILENT);
+ } else if (priv->can.ctrlmode & CAN_CTRLMODE_LOOPBACK) {
+ /* loopback mode : useful for self-test function */
+ priv->write_reg(priv, C_CAN_CTRL_REG, CONTROL_TEST);
+ priv->write_reg(priv, C_CAN_TEST_REG, TEST_LBACK);
+ } else if (priv->can.ctrlmode & CAN_CTRLMODE_LISTENONLY) {
+ /* silent mode : bus-monitoring mode */
+ priv->write_reg(priv, C_CAN_CTRL_REG, CONTROL_TEST);
+ priv->write_reg(priv, C_CAN_TEST_REG, TEST_SILENT);
+ }
+
+ /* configure message objects */
+ c_can_configure_msg_objects(dev);
+
+ /* set a `lec` value so that we can check for updates later */
+ priv->write_reg(priv, C_CAN_STS_REG, LEC_UNUSED);
+
+ /* Clear all internal status */
+ atomic_set(&priv->tx_active, 0);
+ priv->rxmasked = 0;
+ priv->tx_dir = 0;
+
+ /* set bittiming params */
+ return c_can_set_bittiming(dev);
+}
+
+static int c_can_start(struct net_device *dev)
+{
+ struct c_can_priv *priv = netdev_priv(dev);
+ int err;
+
+ /* basic c_can configuration */
+ err = c_can_chip_config(dev);
+ if (err)
+ return err;
+
+ /* Setup the command for new messages */
+ priv->comm_rcv_high = priv->type != BOSCH_D_CAN ?
+ IF_COMM_RCV_LOW : IF_COMM_RCV_HIGH;
+
+ priv->can.state = CAN_STATE_ERROR_ACTIVE;
+
+ /* activate pins */
+ pinctrl_pm_select_default_state(dev->dev.parent);
+ return 0;
+}
+
+static void c_can_stop(struct net_device *dev)
+{
+ struct c_can_priv *priv = netdev_priv(dev);
+
+ c_can_irq_control(priv, false);
+
+ /* put ctrl to init on stop to end ongoing transmission */
+ priv->write_reg(priv, C_CAN_CTRL_REG, CONTROL_INIT);
+
+ /* deactivate pins */
+ pinctrl_pm_select_sleep_state(dev->dev.parent);
+ priv->can.state = CAN_STATE_STOPPED;
+}
+
+static int c_can_set_mode(struct net_device *dev, enum can_mode mode)
+{
+ struct c_can_priv *priv = netdev_priv(dev);
+ int err;
+
+ switch (mode) {
+ case CAN_MODE_START:
+ err = c_can_start(dev);
+ if (err)
+ return err;
+ netif_wake_queue(dev);
+ c_can_irq_control(priv, true);
+ break;
+ default:
+ return -EOPNOTSUPP;
+ }
+
+ return 0;
+}
+
+static int __c_can_get_berr_counter(const struct net_device *dev,
+ struct can_berr_counter *bec)
+{
+ unsigned int reg_err_counter;
+ struct c_can_priv *priv = netdev_priv(dev);
+
+ reg_err_counter = priv->read_reg(priv, C_CAN_ERR_CNT_REG);
+ bec->rxerr = (reg_err_counter & ERR_CNT_REC_MASK) >>
+ ERR_CNT_REC_SHIFT;
+ bec->txerr = reg_err_counter & ERR_CNT_TEC_MASK;
+
+ return 0;
+}
+
+static int c_can_get_berr_counter(const struct net_device *dev,
+ struct can_berr_counter *bec)
+{
+ struct c_can_priv *priv = netdev_priv(dev);
+ int err;
+
+ c_can_pm_runtime_get_sync(priv);
+ err = __c_can_get_berr_counter(dev, bec);
+ c_can_pm_runtime_put_sync(priv);
+
+ return err;
+}
+
+static void c_can_do_tx(struct net_device *dev)
+{
+ struct c_can_priv *priv = netdev_priv(dev);
+ struct net_device_stats *stats = &dev->stats;
+ u32 idx, obj, pkts = 0, bytes = 0, pend, clr;
+
+ clr = pend = priv->read_reg(priv, C_CAN_INTPND2_REG);
+
+ while ((idx = ffs(pend))) {
+ idx--;
+ pend &= ~(1 << idx);
+ obj = idx + C_CAN_MSG_OBJ_TX_FIRST;
+ c_can_inval_tx_object(dev, IF_RX, obj);
+ can_get_echo_skb(dev, idx);
+ bytes += priv->dlc[idx];
+ pkts++;
+ }
+
+ /* Clear the bits in the tx_active mask */
+ atomic_sub(clr, &priv->tx_active);
+
+ if (clr & (1 << (C_CAN_MSG_OBJ_TX_NUM - 1)))
+ netif_wake_queue(dev);
+
+ if (pkts) {
+ stats->tx_bytes += bytes;
+ stats->tx_packets += pkts;
+ can_led_event(dev, CAN_LED_EVENT_TX);
+ }
+}
+
+/*
+ * If we have a gap in the pending bits, that means we either
+ * raced with the hardware or failed to readout all upper
+ * objects in the last run due to quota limit.
+ */
+static u32 c_can_adjust_pending(u32 pend)
+{
+ u32 weight, lasts;
+
+ if (pend == RECEIVE_OBJECT_BITS)
+ return pend;
+
+ /*
+ * If the last set bit is larger than the number of pending
+ * bits we have a gap.
+ */
+ weight = hweight32(pend);
+ lasts = fls(pend);
+
+ /* If the bits are linear, nothing to do */
+ if (lasts == weight)
+ return pend;
+
+ /*
+ * Find the first set bit after the gap. We walk backwards
+ * from the last set bit.
+ */
+ for (lasts--; pend & (1 << (lasts - 1)); lasts--);
+
+ return pend & ~((1 << lasts) - 1);
+}
+
+static inline void c_can_rx_object_get(struct net_device *dev,
+ struct c_can_priv *priv, u32 obj)
+{
+ c_can_object_get(dev, IF_RX, obj, priv->comm_rcv_high);
+}
+
+static inline void c_can_rx_finalize(struct net_device *dev,
+ struct c_can_priv *priv, u32 obj)
+{
+ if (priv->type != BOSCH_D_CAN)
+ c_can_object_get(dev, IF_RX, obj, IF_COMM_CLR_NEWDAT);
+}
+
+static int c_can_read_objects(struct net_device *dev, struct c_can_priv *priv,
+ u32 pend, int quota)
+{
+ u32 pkts = 0, ctrl, obj;
+
+ while ((obj = ffs(pend)) && quota > 0) {
+ pend &= ~BIT(obj - 1);
+
+ c_can_rx_object_get(dev, priv, obj);
+ ctrl = priv->read_reg(priv, C_CAN_IFACE(MSGCTRL_REG, IF_RX));
+
+ if (ctrl & IF_MCONT_MSGLST) {
+ int n = c_can_handle_lost_msg_obj(dev, IF_RX, obj, ctrl);
+
+ pkts += n;
+ quota -= n;
+ continue;
+ }
+
+ /*
+ * This really should not happen, but this covers some
+ * odd HW behaviour. Do not remove that unless you
+ * want to brick your machine.
+ */
+ if (!(ctrl & IF_MCONT_NEWDAT))
+ continue;
+
+ /* read the data from the message object */
+ c_can_read_msg_object(dev, IF_RX, ctrl);
+
+ c_can_rx_finalize(dev, priv, obj);
+
+ pkts++;
+ quota--;
+ }
+
+ return pkts;
+}
+
+static inline u32 c_can_get_pending(struct c_can_priv *priv)
+{
+ u32 pend = priv->read_reg(priv, C_CAN_NEWDAT1_REG);
+
+ return pend;
+}
+
+/*
+ * theory of operation:
+ *
+ * c_can core saves a received CAN message into the first free message
+ * object it finds free (starting with the lowest). Bits NEWDAT and
+ * INTPND are set for this message object indicating that a new message
+ * has arrived. To work-around this issue, we keep two groups of message
+ * objects whose partitioning is defined by C_CAN_MSG_OBJ_RX_SPLIT.
+ *
+ * We clear the newdat bit right away.
+ *
+ * This can result in packet reordering when the readout is slow.
+ */
+static int c_can_do_rx_poll(struct net_device *dev, int quota)
+{
+ struct c_can_priv *priv = netdev_priv(dev);
+ u32 pkts = 0, pend = 0, toread, n;
+
+ /*
+ * It is faster to read only one 16bit register. This is only possible
+ * for a maximum number of 16 objects.
+ */
+ BUILD_BUG_ON_MSG(C_CAN_MSG_OBJ_RX_LAST > 16,
+ "Implementation does not support more message objects than 16");
+
+ while (quota > 0) {
+ if (!pend) {
+ pend = c_can_get_pending(priv);
+ if (!pend)
+ break;
+ /*
+ * If the pending field has a gap, handle the
+ * bits above the gap first.
+ */
+ toread = c_can_adjust_pending(pend);
+ } else {
+ toread = pend;
+ }
+ /* Remove the bits from pend */
+ pend &= ~toread;
+ /* Read the objects */
+ n = c_can_read_objects(dev, priv, toread, quota);
+ pkts += n;
+ quota -= n;
+ }
+
+ if (pkts)
+ can_led_event(dev, CAN_LED_EVENT_RX);
+
+ return pkts;
+}
+
+static int c_can_handle_state_change(struct net_device *dev,
+ enum c_can_bus_error_types error_type)
+{
+ unsigned int reg_err_counter;
+ unsigned int rx_err_passive;
+ struct c_can_priv *priv = netdev_priv(dev);
+ struct net_device_stats *stats = &dev->stats;
+ struct can_frame *cf;
+ struct sk_buff *skb;
+ struct can_berr_counter bec;
+
+ switch (error_type) {
+ case C_CAN_ERROR_WARNING:
+ /* error warning state */
+ priv->can.can_stats.error_warning++;
+ priv->can.state = CAN_STATE_ERROR_WARNING;
+ break;
+ case C_CAN_ERROR_PASSIVE:
+ /* error passive state */
+ priv->can.can_stats.error_passive++;
+ priv->can.state = CAN_STATE_ERROR_PASSIVE;
+ break;
+ case C_CAN_BUS_OFF:
+ /* bus-off state */
+ priv->can.state = CAN_STATE_BUS_OFF;
+ priv->can.can_stats.bus_off++;
+ break;
+ default:
+ break;
+ }
+
+ /* propagate the error condition to the CAN stack */
+ skb = alloc_can_err_skb(dev, &cf);
+ if (unlikely(!skb))
+ return 0;
+
+ __c_can_get_berr_counter(dev, &bec);
+ reg_err_counter = priv->read_reg(priv, C_CAN_ERR_CNT_REG);
+ rx_err_passive = (reg_err_counter & ERR_CNT_RP_MASK) >>
+ ERR_CNT_RP_SHIFT;
+
+ switch (error_type) {
+ case C_CAN_ERROR_WARNING:
+ /* error warning state */
+ cf->can_id |= CAN_ERR_CRTL;
+ cf->data[1] = (bec.txerr > bec.rxerr) ?
+ CAN_ERR_CRTL_TX_WARNING :
+ CAN_ERR_CRTL_RX_WARNING;
+ cf->data[6] = bec.txerr;
+ cf->data[7] = bec.rxerr;
+
+ break;
+ case C_CAN_ERROR_PASSIVE:
+ /* error passive state */
+ cf->can_id |= CAN_ERR_CRTL;
+ if (rx_err_passive)
+ cf->data[1] |= CAN_ERR_CRTL_RX_PASSIVE;
+ if (bec.txerr > 127)
+ cf->data[1] |= CAN_ERR_CRTL_TX_PASSIVE;
+
+ cf->data[6] = bec.txerr;
+ cf->data[7] = bec.rxerr;
+ break;
+ case C_CAN_BUS_OFF:
+ /* bus-off state */
+ cf->can_id |= CAN_ERR_BUSOFF;
+ can_bus_off(dev);
+ break;
+ default:
+ break;
+ }
+
+ stats->rx_packets++;
+ stats->rx_bytes += cf->can_dlc;
+ netif_receive_skb(skb);
+
+ return 1;
+}
+
+static int c_can_handle_bus_err(struct net_device *dev,
+ enum c_can_lec_type lec_type)
+{
+ struct c_can_priv *priv = netdev_priv(dev);
+ struct net_device_stats *stats = &dev->stats;
+ struct can_frame *cf;
+ struct sk_buff *skb;
+
+ /*
+ * early exit if no lec update or no error.
+ * no lec update means that no CAN bus event has been detected
+ * since CPU wrote 0x7 value to status reg.
+ */
+ if (lec_type == LEC_UNUSED || lec_type == LEC_NO_ERROR)
+ return 0;
+
+ if (!(priv->can.ctrlmode & CAN_CTRLMODE_BERR_REPORTING))
+ return 0;
+
+ /* common for all type of bus errors */
+ priv->can.can_stats.bus_error++;
+ stats->rx_errors++;
+
+ /* propagate the error condition to the CAN stack */
+ skb = alloc_can_err_skb(dev, &cf);
+ if (unlikely(!skb))
+ return 0;
+
+ /*
+ * check for 'last error code' which tells us the
+ * type of the last error to occur on the CAN bus
+ */
+ cf->can_id |= CAN_ERR_PROT | CAN_ERR_BUSERROR;
+ cf->data[2] |= CAN_ERR_PROT_UNSPEC;
+
+ switch (lec_type) {
+ case LEC_STUFF_ERROR:
+ netdev_dbg(dev, "stuff error\n");
+ cf->data[2] |= CAN_ERR_PROT_STUFF;
+ break;
+ case LEC_FORM_ERROR:
+ netdev_dbg(dev, "form error\n");
+ cf->data[2] |= CAN_ERR_PROT_FORM;
+ break;
+ case LEC_ACK_ERROR:
+ netdev_dbg(dev, "ack error\n");
+ cf->data[3] |= (CAN_ERR_PROT_LOC_ACK |
+ CAN_ERR_PROT_LOC_ACK_DEL);
+ break;
+ case LEC_BIT1_ERROR:
+ netdev_dbg(dev, "bit1 error\n");
+ cf->data[2] |= CAN_ERR_PROT_BIT1;
+ break;
+ case LEC_BIT0_ERROR:
+ netdev_dbg(dev, "bit0 error\n");
+ cf->data[2] |= CAN_ERR_PROT_BIT0;
+ break;
+ case LEC_CRC_ERROR:
+ netdev_dbg(dev, "CRC error\n");
+ cf->data[3] |= (CAN_ERR_PROT_LOC_CRC_SEQ |
+ CAN_ERR_PROT_LOC_CRC_DEL);
+ break;
+ default:
+ break;
+ }
+
+ stats->rx_packets++;
+ stats->rx_bytes += cf->can_dlc;
+ netif_receive_skb(skb);
+ return 1;
+}
+
+static int c_can_poll(struct napi_struct *napi, int quota)
+{
+ struct net_device *dev = napi->dev;
+ struct c_can_priv *priv = netdev_priv(dev);
+ u16 curr, last = priv->last_status;
+ int work_done = 0;
+
+ priv->last_status = curr = priv->read_reg(priv, C_CAN_STS_REG);
+ /* Ack status on C_CAN. D_CAN is self clearing */
+ if (priv->type != BOSCH_D_CAN)
+ priv->write_reg(priv, C_CAN_STS_REG, LEC_UNUSED);
+
+ /* handle state changes */
+ if ((curr & STATUS_EWARN) && (!(last & STATUS_EWARN))) {
+ netdev_dbg(dev, "entered error warning state\n");
+ work_done += c_can_handle_state_change(dev, C_CAN_ERROR_WARNING);
+ }
+
+ if ((curr & STATUS_EPASS) && (!(last & STATUS_EPASS))) {
+ netdev_dbg(dev, "entered error passive state\n");
+ work_done += c_can_handle_state_change(dev, C_CAN_ERROR_PASSIVE);
+ }
+
+ if ((curr & STATUS_BOFF) && (!(last & STATUS_BOFF))) {
+ netdev_dbg(dev, "entered bus off state\n");
+ work_done += c_can_handle_state_change(dev, C_CAN_BUS_OFF);
+ goto end;
+ }
+
+ /* handle bus recovery events */
+ if ((!(curr & STATUS_BOFF)) && (last & STATUS_BOFF)) {
+ netdev_dbg(dev, "left bus off state\n");
+ priv->can.state = CAN_STATE_ERROR_ACTIVE;
+ }
+ if ((!(curr & STATUS_EPASS)) && (last & STATUS_EPASS)) {
+ netdev_dbg(dev, "left error passive state\n");
+ priv->can.state = CAN_STATE_ERROR_ACTIVE;
+ }
+
+ /* handle lec errors on the bus */
+ work_done += c_can_handle_bus_err(dev, curr & LEC_MASK);
+
+ /* Handle Tx/Rx events. We do this unconditionally */
+ work_done += c_can_do_rx_poll(dev, (quota - work_done));
+ c_can_do_tx(dev);
+
+end:
+ if (work_done < quota) {
+ napi_complete(napi);
+ /* enable all IRQs if we are not in bus off state */
+ if (priv->can.state != CAN_STATE_BUS_OFF)
+ c_can_irq_control(priv, true);
+ }
+
+ return work_done;
+}
+
+static irqreturn_t c_can_isr(int irq, void *dev_id)
+{
+ struct net_device *dev = (struct net_device *)dev_id;
+ struct c_can_priv *priv = netdev_priv(dev);
+
+ if (!priv->read_reg(priv, C_CAN_INT_REG))
+ return IRQ_NONE;
+
+ /* disable all interrupts and schedule the NAPI */
+ c_can_irq_control(priv, false);
+ napi_schedule(&priv->napi);
+
+ return IRQ_HANDLED;
+}
+
+static int c_can_open(struct net_device *dev)
+{
+ int err;
+ struct c_can_priv *priv = netdev_priv(dev);
+
+ c_can_pm_runtime_get_sync(priv);
+ c_can_reset_ram(priv, true);
+
+ /* open the can device */
+ err = open_candev(dev);
+ if (err) {
+ netdev_err(dev, "failed to open can device\n");
+ goto exit_open_fail;
+ }
+
+ /* register interrupt handler */
+ err = request_irq(dev->irq, &c_can_isr, IRQF_SHARED, dev->name,
+ dev);
+ if (err < 0) {
+ netdev_err(dev, "failed to request interrupt\n");
+ goto exit_irq_fail;
+ }
+
+ /* start the c_can controller */
+ err = c_can_start(dev);
+ if (err)
+ goto exit_start_fail;
+
+ can_led_event(dev, CAN_LED_EVENT_OPEN);
+
+ napi_enable(&priv->napi);
+ /* enable status change, error and module interrupts */
+ c_can_irq_control(priv, true);
+ netif_start_queue(dev);
+
+ return 0;
+
+exit_start_fail:
+ free_irq(dev->irq, dev);
+exit_irq_fail:
+ close_candev(dev);
+exit_open_fail:
+ c_can_reset_ram(priv, false);
+ c_can_pm_runtime_put_sync(priv);
+ return err;
+}
+
+static int c_can_close(struct net_device *dev)
+{
+ struct c_can_priv *priv = netdev_priv(dev);
+
+ netif_stop_queue(dev);
+ napi_disable(&priv->napi);
+ c_can_stop(dev);
+ free_irq(dev->irq, dev);
+ close_candev(dev);
+
+ c_can_reset_ram(priv, false);
+ c_can_pm_runtime_put_sync(priv);
+
+ can_led_event(dev, CAN_LED_EVENT_STOP);
+
+ return 0;
+}
+
+struct net_device *alloc_c_can_dev(void)
+{
+ struct net_device *dev;
+ struct c_can_priv *priv;
+
+ dev = alloc_candev(sizeof(struct c_can_priv), C_CAN_MSG_OBJ_TX_NUM);
+ if (!dev)
+ return NULL;
+
+ priv = netdev_priv(dev);
+ netif_napi_add(dev, &priv->napi, c_can_poll, C_CAN_NAPI_WEIGHT);
+
+ priv->dev = dev;
+ priv->can.bittiming_const = &c_can_bittiming_const;
+ priv->can.do_set_mode = c_can_set_mode;
+ priv->can.do_get_berr_counter = c_can_get_berr_counter;
+ priv->can.ctrlmode_supported = CAN_CTRLMODE_LOOPBACK |
+ CAN_CTRLMODE_LISTENONLY |
+ CAN_CTRLMODE_BERR_REPORTING;
+
+ return dev;
+}
+EXPORT_SYMBOL_GPL(alloc_c_can_dev);
+
+#ifdef CONFIG_PM
+int c_can_power_down(struct net_device *dev)
+{
+ u32 val;
+ unsigned long time_out;
+ struct c_can_priv *priv = netdev_priv(dev);
+
+ if (!(dev->flags & IFF_UP))
+ return 0;
+
+ WARN_ON(priv->type != BOSCH_D_CAN);
+
+ /* set PDR value so the device goes to power down mode */
+ val = priv->read_reg(priv, C_CAN_CTRL_EX_REG);
+ val |= CONTROL_EX_PDR;
+ priv->write_reg(priv, C_CAN_CTRL_EX_REG, val);
+
+ /* Wait for the PDA bit to get set */
+ time_out = jiffies + msecs_to_jiffies(INIT_WAIT_MS);
+ while (!(priv->read_reg(priv, C_CAN_STS_REG) & STATUS_PDA) &&
+ time_after(time_out, jiffies))
+ cpu_relax();
+
+ if (time_after(jiffies, time_out))
+ return -ETIMEDOUT;
+
+ c_can_stop(dev);
+
+ c_can_reset_ram(priv, false);
+ c_can_pm_runtime_put_sync(priv);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(c_can_power_down);
+
+int c_can_power_up(struct net_device *dev)
+{
+ u32 val;
+ unsigned long time_out;
+ struct c_can_priv *priv = netdev_priv(dev);
+ int ret;
+
+ if (!(dev->flags & IFF_UP))
+ return 0;
+
+ WARN_ON(priv->type != BOSCH_D_CAN);
+
+ c_can_pm_runtime_get_sync(priv);
+ c_can_reset_ram(priv, true);
+
+ /* Clear PDR and INIT bits */
+ val = priv->read_reg(priv, C_CAN_CTRL_EX_REG);
+ val &= ~CONTROL_EX_PDR;
+ priv->write_reg(priv, C_CAN_CTRL_EX_REG, val);
+ val = priv->read_reg(priv, C_CAN_CTRL_REG);
+ val &= ~CONTROL_INIT;
+ priv->write_reg(priv, C_CAN_CTRL_REG, val);
+
+ /* Wait for the PDA bit to get clear */
+ time_out = jiffies + msecs_to_jiffies(INIT_WAIT_MS);
+ while ((priv->read_reg(priv, C_CAN_STS_REG) & STATUS_PDA) &&
+ time_after(time_out, jiffies))
+ cpu_relax();
+
+ if (time_after(jiffies, time_out))
+ return -ETIMEDOUT;
+
+ ret = c_can_start(dev);
+ if (!ret)
+ c_can_irq_control(priv, true);
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(c_can_power_up);
+#endif
+
+void free_c_can_dev(struct net_device *dev)
+{
+ struct c_can_priv *priv = netdev_priv(dev);
+
+ netif_napi_del(&priv->napi);
+ free_candev(dev);
+}
+EXPORT_SYMBOL_GPL(free_c_can_dev);
+
+static const struct net_device_ops c_can_netdev_ops = {
+ .ndo_open = c_can_open,
+ .ndo_stop = c_can_close,
+ .ndo_start_xmit = c_can_start_xmit,
+ .ndo_change_mtu = can_change_mtu,
+};
+
+int register_c_can_dev(struct net_device *dev)
+{
+ struct c_can_priv *priv = netdev_priv(dev);
+ int err;
+
+ /* Deactivate pins to prevent DRA7 DCAN IP from being
+ * stuck in transition when module is disabled.
+ * Pins are activated in c_can_start() and deactivated
+ * in c_can_stop()
+ */
+ pinctrl_pm_select_sleep_state(dev->dev.parent);
+
+ c_can_pm_runtime_enable(priv);
+
+ dev->flags |= IFF_ECHO; /* we support local echo */
+ dev->netdev_ops = &c_can_netdev_ops;
+
+ err = register_candev(dev);
+ if (err)
+ c_can_pm_runtime_disable(priv);
+ else
+ devm_can_led_init(dev);
+
+ return err;
+}
+EXPORT_SYMBOL_GPL(register_c_can_dev);
+
+void unregister_c_can_dev(struct net_device *dev)
+{
+ struct c_can_priv *priv = netdev_priv(dev);
+
+ unregister_candev(dev);
+
+ c_can_pm_runtime_disable(priv);
+}
+EXPORT_SYMBOL_GPL(unregister_c_can_dev);
+
+MODULE_AUTHOR("Bhupesh Sharma <bhupesh.sharma@st.com>");
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("CAN bus driver for Bosch C_CAN controller");
diff --git a/kernel/drivers/net/can/c_can/c_can.h b/kernel/drivers/net/can/c_can/c_can.h
new file mode 100644
index 000000000..8acdc7fa4
--- /dev/null
+++ b/kernel/drivers/net/can/c_can/c_can.h
@@ -0,0 +1,228 @@
+/*
+ * CAN bus driver for Bosch C_CAN controller
+ *
+ * Copyright (C) 2010 ST Microelectronics
+ * Bhupesh Sharma <bhupesh.sharma@st.com>
+ *
+ * Borrowed heavily from the C_CAN driver originally written by:
+ * Copyright (C) 2007
+ * - Sascha Hauer, Marc Kleine-Budde, Pengutronix <s.hauer@pengutronix.de>
+ * - Simon Kallweit, intefo AG <simon.kallweit@intefo.ch>
+ *
+ * Bosch C_CAN controller is compliant to CAN protocol version 2.0 part A and B.
+ * Bosch C_CAN user manual can be obtained from:
+ * http://www.semiconductors.bosch.de/media/en/pdf/ipmodules_1/c_can/
+ * users_manual_c_can.pdf
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef C_CAN_H
+#define C_CAN_H
+
+/* message object split */
+#define C_CAN_NO_OF_OBJECTS 32
+#define C_CAN_MSG_OBJ_RX_NUM 16
+#define C_CAN_MSG_OBJ_TX_NUM 16
+
+#define C_CAN_MSG_OBJ_RX_FIRST 1
+#define C_CAN_MSG_OBJ_RX_LAST (C_CAN_MSG_OBJ_RX_FIRST + \
+ C_CAN_MSG_OBJ_RX_NUM - 1)
+
+#define C_CAN_MSG_OBJ_TX_FIRST (C_CAN_MSG_OBJ_RX_LAST + 1)
+#define C_CAN_MSG_OBJ_TX_LAST (C_CAN_MSG_OBJ_TX_FIRST + \
+ C_CAN_MSG_OBJ_TX_NUM - 1)
+
+#define C_CAN_MSG_OBJ_RX_SPLIT 9
+#define C_CAN_MSG_RX_LOW_LAST (C_CAN_MSG_OBJ_RX_SPLIT - 1)
+#define RECEIVE_OBJECT_BITS 0x0000ffff
+
+enum reg {
+ C_CAN_CTRL_REG = 0,
+ C_CAN_CTRL_EX_REG,
+ C_CAN_STS_REG,
+ C_CAN_ERR_CNT_REG,
+ C_CAN_BTR_REG,
+ C_CAN_INT_REG,
+ C_CAN_TEST_REG,
+ C_CAN_BRPEXT_REG,
+ C_CAN_IF1_COMREQ_REG,
+ C_CAN_IF1_COMMSK_REG,
+ C_CAN_IF1_MASK1_REG,
+ C_CAN_IF1_MASK2_REG,
+ C_CAN_IF1_ARB1_REG,
+ C_CAN_IF1_ARB2_REG,
+ C_CAN_IF1_MSGCTRL_REG,
+ C_CAN_IF1_DATA1_REG,
+ C_CAN_IF1_DATA2_REG,
+ C_CAN_IF1_DATA3_REG,
+ C_CAN_IF1_DATA4_REG,
+ C_CAN_IF2_COMREQ_REG,
+ C_CAN_IF2_COMMSK_REG,
+ C_CAN_IF2_MASK1_REG,
+ C_CAN_IF2_MASK2_REG,
+ C_CAN_IF2_ARB1_REG,
+ C_CAN_IF2_ARB2_REG,
+ C_CAN_IF2_MSGCTRL_REG,
+ C_CAN_IF2_DATA1_REG,
+ C_CAN_IF2_DATA2_REG,
+ C_CAN_IF2_DATA3_REG,
+ C_CAN_IF2_DATA4_REG,
+ C_CAN_TXRQST1_REG,
+ C_CAN_TXRQST2_REG,
+ C_CAN_NEWDAT1_REG,
+ C_CAN_NEWDAT2_REG,
+ C_CAN_INTPND1_REG,
+ C_CAN_INTPND2_REG,
+ C_CAN_MSGVAL1_REG,
+ C_CAN_MSGVAL2_REG,
+ C_CAN_FUNCTION_REG,
+};
+
+static const u16 reg_map_c_can[] = {
+ [C_CAN_CTRL_REG] = 0x00,
+ [C_CAN_STS_REG] = 0x02,
+ [C_CAN_ERR_CNT_REG] = 0x04,
+ [C_CAN_BTR_REG] = 0x06,
+ [C_CAN_INT_REG] = 0x08,
+ [C_CAN_TEST_REG] = 0x0A,
+ [C_CAN_BRPEXT_REG] = 0x0C,
+ [C_CAN_IF1_COMREQ_REG] = 0x10,
+ [C_CAN_IF1_COMMSK_REG] = 0x12,
+ [C_CAN_IF1_MASK1_REG] = 0x14,
+ [C_CAN_IF1_MASK2_REG] = 0x16,
+ [C_CAN_IF1_ARB1_REG] = 0x18,
+ [C_CAN_IF1_ARB2_REG] = 0x1A,
+ [C_CAN_IF1_MSGCTRL_REG] = 0x1C,
+ [C_CAN_IF1_DATA1_REG] = 0x1E,
+ [C_CAN_IF1_DATA2_REG] = 0x20,
+ [C_CAN_IF1_DATA3_REG] = 0x22,
+ [C_CAN_IF1_DATA4_REG] = 0x24,
+ [C_CAN_IF2_COMREQ_REG] = 0x40,
+ [C_CAN_IF2_COMMSK_REG] = 0x42,
+ [C_CAN_IF2_MASK1_REG] = 0x44,
+ [C_CAN_IF2_MASK2_REG] = 0x46,
+ [C_CAN_IF2_ARB1_REG] = 0x48,
+ [C_CAN_IF2_ARB2_REG] = 0x4A,
+ [C_CAN_IF2_MSGCTRL_REG] = 0x4C,
+ [C_CAN_IF2_DATA1_REG] = 0x4E,
+ [C_CAN_IF2_DATA2_REG] = 0x50,
+ [C_CAN_IF2_DATA3_REG] = 0x52,
+ [C_CAN_IF2_DATA4_REG] = 0x54,
+ [C_CAN_TXRQST1_REG] = 0x80,
+ [C_CAN_TXRQST2_REG] = 0x82,
+ [C_CAN_NEWDAT1_REG] = 0x90,
+ [C_CAN_NEWDAT2_REG] = 0x92,
+ [C_CAN_INTPND1_REG] = 0xA0,
+ [C_CAN_INTPND2_REG] = 0xA2,
+ [C_CAN_MSGVAL1_REG] = 0xB0,
+ [C_CAN_MSGVAL2_REG] = 0xB2,
+};
+
+static const u16 reg_map_d_can[] = {
+ [C_CAN_CTRL_REG] = 0x00,
+ [C_CAN_CTRL_EX_REG] = 0x02,
+ [C_CAN_STS_REG] = 0x04,
+ [C_CAN_ERR_CNT_REG] = 0x08,
+ [C_CAN_BTR_REG] = 0x0C,
+ [C_CAN_BRPEXT_REG] = 0x0E,
+ [C_CAN_INT_REG] = 0x10,
+ [C_CAN_TEST_REG] = 0x14,
+ [C_CAN_FUNCTION_REG] = 0x18,
+ [C_CAN_TXRQST1_REG] = 0x88,
+ [C_CAN_TXRQST2_REG] = 0x8A,
+ [C_CAN_NEWDAT1_REG] = 0x9C,
+ [C_CAN_NEWDAT2_REG] = 0x9E,
+ [C_CAN_INTPND1_REG] = 0xB0,
+ [C_CAN_INTPND2_REG] = 0xB2,
+ [C_CAN_MSGVAL1_REG] = 0xC4,
+ [C_CAN_MSGVAL2_REG] = 0xC6,
+ [C_CAN_IF1_COMREQ_REG] = 0x100,
+ [C_CAN_IF1_COMMSK_REG] = 0x102,
+ [C_CAN_IF1_MASK1_REG] = 0x104,
+ [C_CAN_IF1_MASK2_REG] = 0x106,
+ [C_CAN_IF1_ARB1_REG] = 0x108,
+ [C_CAN_IF1_ARB2_REG] = 0x10A,
+ [C_CAN_IF1_MSGCTRL_REG] = 0x10C,
+ [C_CAN_IF1_DATA1_REG] = 0x110,
+ [C_CAN_IF1_DATA2_REG] = 0x112,
+ [C_CAN_IF1_DATA3_REG] = 0x114,
+ [C_CAN_IF1_DATA4_REG] = 0x116,
+ [C_CAN_IF2_COMREQ_REG] = 0x120,
+ [C_CAN_IF2_COMMSK_REG] = 0x122,
+ [C_CAN_IF2_MASK1_REG] = 0x124,
+ [C_CAN_IF2_MASK2_REG] = 0x126,
+ [C_CAN_IF2_ARB1_REG] = 0x128,
+ [C_CAN_IF2_ARB2_REG] = 0x12A,
+ [C_CAN_IF2_MSGCTRL_REG] = 0x12C,
+ [C_CAN_IF2_DATA1_REG] = 0x130,
+ [C_CAN_IF2_DATA2_REG] = 0x132,
+ [C_CAN_IF2_DATA3_REG] = 0x134,
+ [C_CAN_IF2_DATA4_REG] = 0x136,
+};
+
+enum c_can_dev_id {
+ BOSCH_C_CAN_PLATFORM,
+ BOSCH_C_CAN,
+ BOSCH_D_CAN,
+};
+
+struct raminit_bits {
+ u8 start;
+ u8 done;
+};
+
+struct c_can_driver_data {
+ enum c_can_dev_id id;
+
+ /* RAMINIT register description. Optional. */
+ const struct raminit_bits *raminit_bits; /* Array of START/DONE bit positions */
+ u8 raminit_num; /* Number of CAN instances on the SoC */
+ bool raminit_pulse; /* If set, sets and clears START bit (pulse) */
+};
+
+/* Out of band RAMINIT register access via syscon regmap */
+struct c_can_raminit {
+ struct regmap *syscon; /* for raminit ctrl. reg. access */
+ unsigned int reg; /* register index within syscon */
+ struct raminit_bits bits;
+ bool needs_pulse;
+};
+
+/* c_can private data structure */
+struct c_can_priv {
+ struct can_priv can; /* must be the first member */
+ struct napi_struct napi;
+ struct net_device *dev;
+ struct device *device;
+ atomic_t tx_active;
+ unsigned long tx_dir;
+ int last_status;
+ u16 (*read_reg) (const struct c_can_priv *priv, enum reg index);
+ void (*write_reg) (const struct c_can_priv *priv, enum reg index, u16 val);
+ u32 (*read_reg32) (const struct c_can_priv *priv, enum reg index);
+ void (*write_reg32) (const struct c_can_priv *priv, enum reg index, u32 val);
+ void __iomem *base;
+ const u16 *regs;
+ void *priv; /* for board-specific data */
+ enum c_can_dev_id type;
+ struct c_can_raminit raminit_sys; /* RAMINIT via syscon regmap */
+ void (*raminit) (const struct c_can_priv *priv, bool enable);
+ u32 comm_rcv_high;
+ u32 rxmasked;
+ u32 dlc[C_CAN_MSG_OBJ_TX_NUM];
+};
+
+struct net_device *alloc_c_can_dev(void);
+void free_c_can_dev(struct net_device *dev);
+int register_c_can_dev(struct net_device *dev);
+void unregister_c_can_dev(struct net_device *dev);
+
+#ifdef CONFIG_PM
+int c_can_power_up(struct net_device *dev);
+int c_can_power_down(struct net_device *dev);
+#endif
+
+#endif /* C_CAN_H */
diff --git a/kernel/drivers/net/can/c_can/c_can_pci.c b/kernel/drivers/net/can/c_can/c_can_pci.c
new file mode 100644
index 000000000..7be393c96
--- /dev/null
+++ b/kernel/drivers/net/can/c_can/c_can_pci.c
@@ -0,0 +1,293 @@
+/*
+ * PCI bus driver for Bosch C_CAN/D_CAN controller
+ *
+ * Copyright (C) 2012 Federico Vaga <federico.vaga@gmail.com>
+ *
+ * Borrowed from c_can_platform.c
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/netdevice.h>
+#include <linux/pci.h>
+
+#include <linux/can/dev.h>
+
+#include "c_can.h"
+
+#define PCI_DEVICE_ID_PCH_CAN 0x8818
+#define PCH_PCI_SOFT_RESET 0x01fc
+
+enum c_can_pci_reg_align {
+ C_CAN_REG_ALIGN_16,
+ C_CAN_REG_ALIGN_32,
+ C_CAN_REG_32,
+};
+
+struct c_can_pci_data {
+ /* Specify if is C_CAN or D_CAN */
+ enum c_can_dev_id type;
+ /* Set the register alignment in the memory */
+ enum c_can_pci_reg_align reg_align;
+ /* Set the frequency */
+ unsigned int freq;
+ /* PCI bar number */
+ int bar;
+ /* Callback for reset */
+ void (*init)(const struct c_can_priv *priv, bool enable);
+};
+
+/*
+ * 16-bit c_can registers can be arranged differently in the memory
+ * architecture of different implementations. For example: 16-bit
+ * registers can be aligned to a 16-bit boundary or 32-bit boundary etc.
+ * Handle the same by providing a common read/write interface.
+ */
+static u16 c_can_pci_read_reg_aligned_to_16bit(const struct c_can_priv *priv,
+ enum reg index)
+{
+ return readw(priv->base + priv->regs[index]);
+}
+
+static void c_can_pci_write_reg_aligned_to_16bit(const struct c_can_priv *priv,
+ enum reg index, u16 val)
+{
+ writew(val, priv->base + priv->regs[index]);
+}
+
+static u16 c_can_pci_read_reg_aligned_to_32bit(const struct c_can_priv *priv,
+ enum reg index)
+{
+ return readw(priv->base + 2 * priv->regs[index]);
+}
+
+static void c_can_pci_write_reg_aligned_to_32bit(const struct c_can_priv *priv,
+ enum reg index, u16 val)
+{
+ writew(val, priv->base + 2 * priv->regs[index]);
+}
+
+static u16 c_can_pci_read_reg_32bit(const struct c_can_priv *priv,
+ enum reg index)
+{
+ return (u16)ioread32(priv->base + 2 * priv->regs[index]);
+}
+
+static void c_can_pci_write_reg_32bit(const struct c_can_priv *priv,
+ enum reg index, u16 val)
+{
+ iowrite32((u32)val, priv->base + 2 * priv->regs[index]);
+}
+
+static u32 c_can_pci_read_reg32(const struct c_can_priv *priv, enum reg index)
+{
+ u32 val;
+
+ val = priv->read_reg(priv, index);
+ val |= ((u32) priv->read_reg(priv, index + 1)) << 16;
+
+ return val;
+}
+
+static void c_can_pci_write_reg32(const struct c_can_priv *priv, enum reg index,
+ u32 val)
+{
+ priv->write_reg(priv, index + 1, val >> 16);
+ priv->write_reg(priv, index, val);
+}
+
+static void c_can_pci_reset_pch(const struct c_can_priv *priv, bool enable)
+{
+ if (enable) {
+ u32 __iomem *addr = priv->base + PCH_PCI_SOFT_RESET;
+
+ /* write to sw reset register */
+ iowrite32(1, addr);
+ iowrite32(0, addr);
+ }
+}
+
+static int c_can_pci_probe(struct pci_dev *pdev,
+ const struct pci_device_id *ent)
+{
+ struct c_can_pci_data *c_can_pci_data = (void *)ent->driver_data;
+ struct c_can_priv *priv;
+ struct net_device *dev;
+ void __iomem *addr;
+ int ret;
+
+ ret = pci_enable_device(pdev);
+ if (ret) {
+ dev_err(&pdev->dev, "pci_enable_device FAILED\n");
+ goto out;
+ }
+
+ ret = pci_request_regions(pdev, KBUILD_MODNAME);
+ if (ret) {
+ dev_err(&pdev->dev, "pci_request_regions FAILED\n");
+ goto out_disable_device;
+ }
+
+ ret = pci_enable_msi(pdev);
+ if (!ret) {
+ dev_info(&pdev->dev, "MSI enabled\n");
+ pci_set_master(pdev);
+ }
+
+ addr = pci_iomap(pdev, c_can_pci_data->bar,
+ pci_resource_len(pdev, c_can_pci_data->bar));
+ if (!addr) {
+ dev_err(&pdev->dev,
+ "device has no PCI memory resources, "
+ "failing adapter\n");
+ ret = -ENOMEM;
+ goto out_release_regions;
+ }
+
+ /* allocate the c_can device */
+ dev = alloc_c_can_dev();
+ if (!dev) {
+ ret = -ENOMEM;
+ goto out_iounmap;
+ }
+
+ priv = netdev_priv(dev);
+ pci_set_drvdata(pdev, dev);
+ SET_NETDEV_DEV(dev, &pdev->dev);
+
+ dev->irq = pdev->irq;
+ priv->base = addr;
+
+ if (!c_can_pci_data->freq) {
+ dev_err(&pdev->dev, "no clock frequency defined\n");
+ ret = -ENODEV;
+ goto out_free_c_can;
+ } else {
+ priv->can.clock.freq = c_can_pci_data->freq;
+ }
+
+ /* Configure CAN type */
+ switch (c_can_pci_data->type) {
+ case BOSCH_C_CAN:
+ priv->regs = reg_map_c_can;
+ break;
+ case BOSCH_D_CAN:
+ priv->regs = reg_map_d_can;
+ priv->can.ctrlmode_supported |= CAN_CTRLMODE_3_SAMPLES;
+ break;
+ default:
+ ret = -EINVAL;
+ goto out_free_c_can;
+ }
+
+ priv->type = c_can_pci_data->type;
+
+ /* Configure access to registers */
+ switch (c_can_pci_data->reg_align) {
+ case C_CAN_REG_ALIGN_32:
+ priv->read_reg = c_can_pci_read_reg_aligned_to_32bit;
+ priv->write_reg = c_can_pci_write_reg_aligned_to_32bit;
+ break;
+ case C_CAN_REG_ALIGN_16:
+ priv->read_reg = c_can_pci_read_reg_aligned_to_16bit;
+ priv->write_reg = c_can_pci_write_reg_aligned_to_16bit;
+ break;
+ case C_CAN_REG_32:
+ priv->read_reg = c_can_pci_read_reg_32bit;
+ priv->write_reg = c_can_pci_write_reg_32bit;
+ break;
+ default:
+ ret = -EINVAL;
+ goto out_free_c_can;
+ }
+ priv->read_reg32 = c_can_pci_read_reg32;
+ priv->write_reg32 = c_can_pci_write_reg32;
+
+ priv->raminit = c_can_pci_data->init;
+
+ ret = register_c_can_dev(dev);
+ if (ret) {
+ dev_err(&pdev->dev, "registering %s failed (err=%d)\n",
+ KBUILD_MODNAME, ret);
+ goto out_free_c_can;
+ }
+
+ dev_dbg(&pdev->dev, "%s device registered (regs=%p, irq=%d)\n",
+ KBUILD_MODNAME, priv->regs, dev->irq);
+
+ return 0;
+
+out_free_c_can:
+ free_c_can_dev(dev);
+out_iounmap:
+ pci_iounmap(pdev, addr);
+out_release_regions:
+ pci_disable_msi(pdev);
+ pci_clear_master(pdev);
+ pci_release_regions(pdev);
+out_disable_device:
+ pci_disable_device(pdev);
+out:
+ return ret;
+}
+
+static void c_can_pci_remove(struct pci_dev *pdev)
+{
+ struct net_device *dev = pci_get_drvdata(pdev);
+ struct c_can_priv *priv = netdev_priv(dev);
+
+ unregister_c_can_dev(dev);
+
+ free_c_can_dev(dev);
+
+ pci_iounmap(pdev, priv->base);
+ pci_disable_msi(pdev);
+ pci_clear_master(pdev);
+ pci_release_regions(pdev);
+ pci_disable_device(pdev);
+}
+
+static struct c_can_pci_data c_can_sta2x11= {
+ .type = BOSCH_C_CAN,
+ .reg_align = C_CAN_REG_ALIGN_32,
+ .freq = 52000000, /* 52 Mhz */
+ .bar = 0,
+};
+
+static struct c_can_pci_data c_can_pch = {
+ .type = BOSCH_C_CAN,
+ .reg_align = C_CAN_REG_32,
+ .freq = 50000000, /* 50 MHz */
+ .init = c_can_pci_reset_pch,
+ .bar = 1,
+};
+
+#define C_CAN_ID(_vend, _dev, _driverdata) { \
+ PCI_DEVICE(_vend, _dev), \
+ .driver_data = (unsigned long)&_driverdata, \
+}
+
+static const struct pci_device_id c_can_pci_tbl[] = {
+ C_CAN_ID(PCI_VENDOR_ID_STMICRO, PCI_DEVICE_ID_STMICRO_CAN,
+ c_can_sta2x11),
+ C_CAN_ID(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_PCH_CAN,
+ c_can_pch),
+ {},
+};
+static struct pci_driver c_can_pci_driver = {
+ .name = KBUILD_MODNAME,
+ .id_table = c_can_pci_tbl,
+ .probe = c_can_pci_probe,
+ .remove = c_can_pci_remove,
+};
+
+module_pci_driver(c_can_pci_driver);
+
+MODULE_AUTHOR("Federico Vaga <federico.vaga@gmail.com>");
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("PCI CAN bus driver for Bosch C_CAN/D_CAN controller");
+MODULE_DEVICE_TABLE(pci, c_can_pci_tbl);
diff --git a/kernel/drivers/net/can/c_can/c_can_platform.c b/kernel/drivers/net/can/c_can/c_can_platform.c
new file mode 100644
index 000000000..e36d10520
--- /dev/null
+++ b/kernel/drivers/net/can/c_can/c_can_platform.c
@@ -0,0 +1,494 @@
+/*
+ * Platform CAN bus driver for Bosch C_CAN controller
+ *
+ * Copyright (C) 2010 ST Microelectronics
+ * Bhupesh Sharma <bhupesh.sharma@st.com>
+ *
+ * Borrowed heavily from the C_CAN driver originally written by:
+ * Copyright (C) 2007
+ * - Sascha Hauer, Marc Kleine-Budde, Pengutronix <s.hauer@pengutronix.de>
+ * - Simon Kallweit, intefo AG <simon.kallweit@intefo.ch>
+ *
+ * Bosch C_CAN controller is compliant to CAN protocol version 2.0 part A and B.
+ * Bosch C_CAN user manual can be obtained from:
+ * http://www.semiconductors.bosch.de/media/en/pdf/ipmodules_1/c_can/
+ * users_manual_c_can.pdf
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/netdevice.h>
+#include <linux/if_arp.h>
+#include <linux/if_ether.h>
+#include <linux/list.h>
+#include <linux/io.h>
+#include <linux/platform_device.h>
+#include <linux/clk.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/mfd/syscon.h>
+#include <linux/regmap.h>
+
+#include <linux/can/dev.h>
+
+#include "c_can.h"
+
+#define DCAN_RAM_INIT_BIT (1 << 3)
+static DEFINE_SPINLOCK(raminit_lock);
+/*
+ * 16-bit c_can registers can be arranged differently in the memory
+ * architecture of different implementations. For example: 16-bit
+ * registers can be aligned to a 16-bit boundary or 32-bit boundary etc.
+ * Handle the same by providing a common read/write interface.
+ */
+static u16 c_can_plat_read_reg_aligned_to_16bit(const struct c_can_priv *priv,
+ enum reg index)
+{
+ return readw(priv->base + priv->regs[index]);
+}
+
+static void c_can_plat_write_reg_aligned_to_16bit(const struct c_can_priv *priv,
+ enum reg index, u16 val)
+{
+ writew(val, priv->base + priv->regs[index]);
+}
+
+static u16 c_can_plat_read_reg_aligned_to_32bit(const struct c_can_priv *priv,
+ enum reg index)
+{
+ return readw(priv->base + 2 * priv->regs[index]);
+}
+
+static void c_can_plat_write_reg_aligned_to_32bit(const struct c_can_priv *priv,
+ enum reg index, u16 val)
+{
+ writew(val, priv->base + 2 * priv->regs[index]);
+}
+
+static void c_can_hw_raminit_wait_syscon(const struct c_can_priv *priv,
+ u32 mask, u32 val)
+{
+ const struct c_can_raminit *raminit = &priv->raminit_sys;
+ int timeout = 0;
+ u32 ctrl = 0;
+
+ /* We look only at the bits of our instance. */
+ val &= mask;
+ do {
+ udelay(1);
+ timeout++;
+
+ regmap_read(raminit->syscon, raminit->reg, &ctrl);
+ if (timeout == 1000) {
+ dev_err(&priv->dev->dev, "%s: time out\n", __func__);
+ break;
+ }
+ } while ((ctrl & mask) != val);
+}
+
+static void c_can_hw_raminit_syscon(const struct c_can_priv *priv, bool enable)
+{
+ const struct c_can_raminit *raminit = &priv->raminit_sys;
+ u32 ctrl = 0;
+ u32 mask;
+
+ spin_lock(&raminit_lock);
+
+ mask = 1 << raminit->bits.start | 1 << raminit->bits.done;
+ regmap_read(raminit->syscon, raminit->reg, &ctrl);
+
+ /* We clear the start bit first. The start bit is
+ * looking at the 0 -> transition, but is not self clearing;
+ * NOTE: DONE must be written with 1 to clear it.
+ * We can't clear the DONE bit here using regmap_update_bits()
+ * as it will bypass the write if initial condition is START:0 DONE:1
+ * e.g. on DRA7 which needs START pulse.
+ */
+ ctrl &= ~mask; /* START = 0, DONE = 0 */
+ regmap_update_bits(raminit->syscon, raminit->reg, mask, ctrl);
+
+ /* check if START bit is 0. Ignore DONE bit for now
+ * as it can be either 0 or 1.
+ */
+ c_can_hw_raminit_wait_syscon(priv, 1 << raminit->bits.start, ctrl);
+
+ if (enable) {
+ /* Clear DONE bit & set START bit. */
+ ctrl |= 1 << raminit->bits.start;
+ /* DONE must be written with 1 to clear it */
+ ctrl |= 1 << raminit->bits.done;
+ regmap_update_bits(raminit->syscon, raminit->reg, mask, ctrl);
+ /* prevent further clearing of DONE bit */
+ ctrl &= ~(1 << raminit->bits.done);
+ /* clear START bit if start pulse is needed */
+ if (raminit->needs_pulse) {
+ ctrl &= ~(1 << raminit->bits.start);
+ regmap_update_bits(raminit->syscon, raminit->reg,
+ mask, ctrl);
+ }
+
+ ctrl |= 1 << raminit->bits.done;
+ c_can_hw_raminit_wait_syscon(priv, mask, ctrl);
+ }
+ spin_unlock(&raminit_lock);
+}
+
+static u32 c_can_plat_read_reg32(const struct c_can_priv *priv, enum reg index)
+{
+ u32 val;
+
+ val = priv->read_reg(priv, index);
+ val |= ((u32) priv->read_reg(priv, index + 1)) << 16;
+
+ return val;
+}
+
+static void c_can_plat_write_reg32(const struct c_can_priv *priv, enum reg index,
+ u32 val)
+{
+ priv->write_reg(priv, index + 1, val >> 16);
+ priv->write_reg(priv, index, val);
+}
+
+static u32 d_can_plat_read_reg32(const struct c_can_priv *priv, enum reg index)
+{
+ return readl(priv->base + priv->regs[index]);
+}
+
+static void d_can_plat_write_reg32(const struct c_can_priv *priv, enum reg index,
+ u32 val)
+{
+ writel(val, priv->base + priv->regs[index]);
+}
+
+static void c_can_hw_raminit_wait(const struct c_can_priv *priv, u32 mask)
+{
+ while (priv->read_reg32(priv, C_CAN_FUNCTION_REG) & mask)
+ udelay(1);
+}
+
+static void c_can_hw_raminit(const struct c_can_priv *priv, bool enable)
+{
+ u32 ctrl;
+
+ ctrl = priv->read_reg32(priv, C_CAN_FUNCTION_REG);
+ ctrl &= ~DCAN_RAM_INIT_BIT;
+ priv->write_reg32(priv, C_CAN_FUNCTION_REG, ctrl);
+ c_can_hw_raminit_wait(priv, ctrl);
+
+ if (enable) {
+ ctrl |= DCAN_RAM_INIT_BIT;
+ priv->write_reg32(priv, C_CAN_FUNCTION_REG, ctrl);
+ c_can_hw_raminit_wait(priv, ctrl);
+ }
+}
+
+static const struct c_can_driver_data c_can_drvdata = {
+ .id = BOSCH_C_CAN,
+};
+
+static const struct c_can_driver_data d_can_drvdata = {
+ .id = BOSCH_D_CAN,
+};
+
+static const struct raminit_bits dra7_raminit_bits[] = {
+ [0] = { .start = 3, .done = 1, },
+ [1] = { .start = 5, .done = 2, },
+};
+
+static const struct c_can_driver_data dra7_dcan_drvdata = {
+ .id = BOSCH_D_CAN,
+ .raminit_num = ARRAY_SIZE(dra7_raminit_bits),
+ .raminit_bits = dra7_raminit_bits,
+ .raminit_pulse = true,
+};
+
+static const struct raminit_bits am3352_raminit_bits[] = {
+ [0] = { .start = 0, .done = 8, },
+ [1] = { .start = 1, .done = 9, },
+};
+
+static const struct c_can_driver_data am3352_dcan_drvdata = {
+ .id = BOSCH_D_CAN,
+ .raminit_num = ARRAY_SIZE(am3352_raminit_bits),
+ .raminit_bits = am3352_raminit_bits,
+};
+
+static struct platform_device_id c_can_id_table[] = {
+ {
+ .name = KBUILD_MODNAME,
+ .driver_data = (kernel_ulong_t)&c_can_drvdata,
+ },
+ {
+ .name = "c_can",
+ .driver_data = (kernel_ulong_t)&c_can_drvdata,
+ },
+ {
+ .name = "d_can",
+ .driver_data = (kernel_ulong_t)&d_can_drvdata,
+ },
+ { /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(platform, c_can_id_table);
+
+static const struct of_device_id c_can_of_table[] = {
+ { .compatible = "bosch,c_can", .data = &c_can_drvdata },
+ { .compatible = "bosch,d_can", .data = &d_can_drvdata },
+ { .compatible = "ti,dra7-d_can", .data = &dra7_dcan_drvdata },
+ { .compatible = "ti,am3352-d_can", .data = &am3352_dcan_drvdata },
+ { .compatible = "ti,am4372-d_can", .data = &am3352_dcan_drvdata },
+ { /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(of, c_can_of_table);
+
+static int c_can_plat_probe(struct platform_device *pdev)
+{
+ int ret;
+ void __iomem *addr;
+ struct net_device *dev;
+ struct c_can_priv *priv;
+ const struct of_device_id *match;
+ struct resource *mem;
+ int irq;
+ struct clk *clk;
+ const struct c_can_driver_data *drvdata;
+ struct device_node *np = pdev->dev.of_node;
+
+ match = of_match_device(c_can_of_table, &pdev->dev);
+ if (match) {
+ drvdata = match->data;
+ } else if (pdev->id_entry->driver_data) {
+ drvdata = (struct c_can_driver_data *)
+ platform_get_device_id(pdev)->driver_data;
+ } else {
+ return -ENODEV;
+ }
+
+ /* get the appropriate clk */
+ clk = devm_clk_get(&pdev->dev, NULL);
+ if (IS_ERR(clk)) {
+ ret = PTR_ERR(clk);
+ goto exit;
+ }
+
+ /* get the platform data */
+ irq = platform_get_irq(pdev, 0);
+ if (irq <= 0) {
+ ret = -ENODEV;
+ goto exit;
+ }
+
+ mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ addr = devm_ioremap_resource(&pdev->dev, mem);
+ if (IS_ERR(addr)) {
+ ret = PTR_ERR(addr);
+ goto exit;
+ }
+
+ /* allocate the c_can device */
+ dev = alloc_c_can_dev();
+ if (!dev) {
+ ret = -ENOMEM;
+ goto exit;
+ }
+
+ priv = netdev_priv(dev);
+ switch (drvdata->id) {
+ case BOSCH_C_CAN:
+ priv->regs = reg_map_c_can;
+ switch (mem->flags & IORESOURCE_MEM_TYPE_MASK) {
+ case IORESOURCE_MEM_32BIT:
+ priv->read_reg = c_can_plat_read_reg_aligned_to_32bit;
+ priv->write_reg = c_can_plat_write_reg_aligned_to_32bit;
+ priv->read_reg32 = c_can_plat_read_reg32;
+ priv->write_reg32 = c_can_plat_write_reg32;
+ break;
+ case IORESOURCE_MEM_16BIT:
+ default:
+ priv->read_reg = c_can_plat_read_reg_aligned_to_16bit;
+ priv->write_reg = c_can_plat_write_reg_aligned_to_16bit;
+ priv->read_reg32 = c_can_plat_read_reg32;
+ priv->write_reg32 = c_can_plat_write_reg32;
+ break;
+ }
+ break;
+ case BOSCH_D_CAN:
+ priv->regs = reg_map_d_can;
+ priv->can.ctrlmode_supported |= CAN_CTRLMODE_3_SAMPLES;
+ priv->read_reg = c_can_plat_read_reg_aligned_to_16bit;
+ priv->write_reg = c_can_plat_write_reg_aligned_to_16bit;
+ priv->read_reg32 = d_can_plat_read_reg32;
+ priv->write_reg32 = d_can_plat_write_reg32;
+
+ /* Check if we need custom RAMINIT via syscon. Mostly for TI
+ * platforms. Only supported with DT boot.
+ */
+ if (np && of_property_read_bool(np, "syscon-raminit")) {
+ u32 id;
+ struct c_can_raminit *raminit = &priv->raminit_sys;
+
+ ret = -EINVAL;
+ raminit->syscon = syscon_regmap_lookup_by_phandle(np,
+ "syscon-raminit");
+ if (IS_ERR(raminit->syscon)) {
+ /* can fail with -EPROBE_DEFER */
+ ret = PTR_ERR(raminit->syscon);
+ free_c_can_dev(dev);
+ return ret;
+ }
+
+ if (of_property_read_u32_index(np, "syscon-raminit", 1,
+ &raminit->reg)) {
+ dev_err(&pdev->dev,
+ "couldn't get the RAMINIT reg. offset!\n");
+ goto exit_free_device;
+ }
+
+ if (of_property_read_u32_index(np, "syscon-raminit", 2,
+ &id)) {
+ dev_err(&pdev->dev,
+ "couldn't get the CAN instance ID\n");
+ goto exit_free_device;
+ }
+
+ if (id >= drvdata->raminit_num) {
+ dev_err(&pdev->dev,
+ "Invalid CAN instance ID\n");
+ goto exit_free_device;
+ }
+
+ raminit->bits = drvdata->raminit_bits[id];
+ raminit->needs_pulse = drvdata->raminit_pulse;
+
+ priv->raminit = c_can_hw_raminit_syscon;
+ } else {
+ priv->raminit = c_can_hw_raminit;
+ }
+ break;
+ default:
+ ret = -EINVAL;
+ goto exit_free_device;
+ }
+
+ dev->irq = irq;
+ priv->base = addr;
+ priv->device = &pdev->dev;
+ priv->can.clock.freq = clk_get_rate(clk);
+ priv->priv = clk;
+ priv->type = drvdata->id;
+
+ platform_set_drvdata(pdev, dev);
+ SET_NETDEV_DEV(dev, &pdev->dev);
+
+ ret = register_c_can_dev(dev);
+ if (ret) {
+ dev_err(&pdev->dev, "registering %s failed (err=%d)\n",
+ KBUILD_MODNAME, ret);
+ goto exit_free_device;
+ }
+
+ dev_info(&pdev->dev, "%s device registered (regs=%p, irq=%d)\n",
+ KBUILD_MODNAME, priv->base, dev->irq);
+ return 0;
+
+exit_free_device:
+ free_c_can_dev(dev);
+exit:
+ dev_err(&pdev->dev, "probe failed\n");
+
+ return ret;
+}
+
+static int c_can_plat_remove(struct platform_device *pdev)
+{
+ struct net_device *dev = platform_get_drvdata(pdev);
+
+ unregister_c_can_dev(dev);
+
+ free_c_can_dev(dev);
+
+ return 0;
+}
+
+#ifdef CONFIG_PM
+static int c_can_suspend(struct platform_device *pdev, pm_message_t state)
+{
+ int ret;
+ struct net_device *ndev = platform_get_drvdata(pdev);
+ struct c_can_priv *priv = netdev_priv(ndev);
+
+ if (priv->type != BOSCH_D_CAN) {
+ dev_warn(&pdev->dev, "Not supported\n");
+ return 0;
+ }
+
+ if (netif_running(ndev)) {
+ netif_stop_queue(ndev);
+ netif_device_detach(ndev);
+ }
+
+ ret = c_can_power_down(ndev);
+ if (ret) {
+ netdev_err(ndev, "failed to enter power down mode\n");
+ return ret;
+ }
+
+ priv->can.state = CAN_STATE_SLEEPING;
+
+ return 0;
+}
+
+static int c_can_resume(struct platform_device *pdev)
+{
+ int ret;
+ struct net_device *ndev = platform_get_drvdata(pdev);
+ struct c_can_priv *priv = netdev_priv(ndev);
+
+ if (priv->type != BOSCH_D_CAN) {
+ dev_warn(&pdev->dev, "Not supported\n");
+ return 0;
+ }
+
+ ret = c_can_power_up(ndev);
+ if (ret) {
+ netdev_err(ndev, "Still in power down mode\n");
+ return ret;
+ }
+
+ priv->can.state = CAN_STATE_ERROR_ACTIVE;
+
+ if (netif_running(ndev)) {
+ netif_device_attach(ndev);
+ netif_start_queue(ndev);
+ }
+
+ return 0;
+}
+#else
+#define c_can_suspend NULL
+#define c_can_resume NULL
+#endif
+
+static struct platform_driver c_can_plat_driver = {
+ .driver = {
+ .name = KBUILD_MODNAME,
+ .of_match_table = c_can_of_table,
+ },
+ .probe = c_can_plat_probe,
+ .remove = c_can_plat_remove,
+ .suspend = c_can_suspend,
+ .resume = c_can_resume,
+ .id_table = c_can_id_table,
+};
+
+module_platform_driver(c_can_plat_driver);
+
+MODULE_AUTHOR("Bhupesh Sharma <bhupesh.sharma@st.com>");
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("Platform CAN bus driver for Bosch C_CAN controller");