summaryrefslogtreecommitdiffstats
path: root/kernel/drivers/mtd/nand/nand_base.c
diff options
context:
space:
mode:
Diffstat (limited to 'kernel/drivers/mtd/nand/nand_base.c')
-rw-r--r--kernel/drivers/mtd/nand/nand_base.c250
1 files changed, 216 insertions, 34 deletions
diff --git a/kernel/drivers/mtd/nand/nand_base.c b/kernel/drivers/mtd/nand/nand_base.c
index c2e1232cd..3ff583f16 100644
--- a/kernel/drivers/mtd/nand/nand_base.c
+++ b/kernel/drivers/mtd/nand/nand_base.c
@@ -1,6 +1,4 @@
/*
- * drivers/mtd/nand.c
- *
* Overview:
* This is the generic MTD driver for NAND flash devices. It should be
* capable of working with almost all NAND chips currently available.
@@ -48,6 +46,7 @@
#include <linux/leds.h>
#include <linux/io.h>
#include <linux/mtd/partitions.h>
+#include <linux/of_mtd.h>
/* Define default oob placement schemes for large and small page devices */
static struct nand_ecclayout nand_oob_8 = {
@@ -544,23 +543,32 @@ static void panic_nand_wait_ready(struct mtd_info *mtd, unsigned long timeo)
}
}
-/* Wait for the ready pin, after a command. The timeout is caught later. */
+/**
+ * nand_wait_ready - [GENERIC] Wait for the ready pin after commands.
+ * @mtd: MTD device structure
+ *
+ * Wait for the ready pin after a command, and warn if a timeout occurs.
+ */
void nand_wait_ready(struct mtd_info *mtd)
{
struct nand_chip *chip = mtd->priv;
- unsigned long timeo = jiffies + msecs_to_jiffies(20);
+ unsigned long timeo = 400;
- /* 400ms timeout */
if (in_interrupt() || oops_in_progress)
- return panic_nand_wait_ready(mtd, 400);
+ return panic_nand_wait_ready(mtd, timeo);
led_trigger_event(nand_led_trigger, LED_FULL);
/* Wait until command is processed or timeout occurs */
+ timeo = jiffies + msecs_to_jiffies(timeo);
do {
if (chip->dev_ready(mtd))
- break;
- touch_softlockup_watchdog();
+ goto out;
+ cond_resched();
} while (time_before(jiffies, timeo));
+
+ pr_warn_ratelimited(
+ "timeout while waiting for chip to become ready\n");
+out:
led_trigger_event(nand_led_trigger, LED_OFF);
}
EXPORT_SYMBOL_GPL(nand_wait_ready);
@@ -886,15 +894,13 @@ static void panic_nand_wait(struct mtd_info *mtd, struct nand_chip *chip,
* @mtd: MTD device structure
* @chip: NAND chip structure
*
- * Wait for command done. This applies to erase and program only. Erase can
- * take up to 400ms and program up to 20ms according to general NAND and
- * SmartMedia specs.
+ * Wait for command done. This applies to erase and program only.
*/
static int nand_wait(struct mtd_info *mtd, struct nand_chip *chip)
{
- int status, state = chip->state;
- unsigned long timeo = (state == FL_ERASING ? 400 : 20);
+ int status;
+ unsigned long timeo = 400;
led_trigger_event(nand_led_trigger, LED_FULL);
@@ -910,7 +916,7 @@ static int nand_wait(struct mtd_info *mtd, struct nand_chip *chip)
panic_nand_wait(mtd, chip, timeo);
else {
timeo = jiffies + msecs_to_jiffies(timeo);
- while (time_before(jiffies, timeo)) {
+ do {
if (chip->dev_ready) {
if (chip->dev_ready(mtd))
break;
@@ -919,7 +925,7 @@ static int nand_wait(struct mtd_info *mtd, struct nand_chip *chip)
break;
}
cond_resched();
- }
+ } while (time_before(jiffies, timeo));
}
led_trigger_event(nand_led_trigger, LED_OFF);
@@ -1102,6 +1108,134 @@ out:
EXPORT_SYMBOL(nand_lock);
/**
+ * nand_check_erased_buf - check if a buffer contains (almost) only 0xff data
+ * @buf: buffer to test
+ * @len: buffer length
+ * @bitflips_threshold: maximum number of bitflips
+ *
+ * Check if a buffer contains only 0xff, which means the underlying region
+ * has been erased and is ready to be programmed.
+ * The bitflips_threshold specify the maximum number of bitflips before
+ * considering the region is not erased.
+ * Note: The logic of this function has been extracted from the memweight
+ * implementation, except that nand_check_erased_buf function exit before
+ * testing the whole buffer if the number of bitflips exceed the
+ * bitflips_threshold value.
+ *
+ * Returns a positive number of bitflips less than or equal to
+ * bitflips_threshold, or -ERROR_CODE for bitflips in excess of the
+ * threshold.
+ */
+static int nand_check_erased_buf(void *buf, int len, int bitflips_threshold)
+{
+ const unsigned char *bitmap = buf;
+ int bitflips = 0;
+ int weight;
+
+ for (; len && ((uintptr_t)bitmap) % sizeof(long);
+ len--, bitmap++) {
+ weight = hweight8(*bitmap);
+ bitflips += BITS_PER_BYTE - weight;
+ if (unlikely(bitflips > bitflips_threshold))
+ return -EBADMSG;
+ }
+
+ for (; len >= sizeof(long);
+ len -= sizeof(long), bitmap += sizeof(long)) {
+ weight = hweight_long(*((unsigned long *)bitmap));
+ bitflips += BITS_PER_LONG - weight;
+ if (unlikely(bitflips > bitflips_threshold))
+ return -EBADMSG;
+ }
+
+ for (; len > 0; len--, bitmap++) {
+ weight = hweight8(*bitmap);
+ bitflips += BITS_PER_BYTE - weight;
+ if (unlikely(bitflips > bitflips_threshold))
+ return -EBADMSG;
+ }
+
+ return bitflips;
+}
+
+/**
+ * nand_check_erased_ecc_chunk - check if an ECC chunk contains (almost) only
+ * 0xff data
+ * @data: data buffer to test
+ * @datalen: data length
+ * @ecc: ECC buffer
+ * @ecclen: ECC length
+ * @extraoob: extra OOB buffer
+ * @extraooblen: extra OOB length
+ * @bitflips_threshold: maximum number of bitflips
+ *
+ * Check if a data buffer and its associated ECC and OOB data contains only
+ * 0xff pattern, which means the underlying region has been erased and is
+ * ready to be programmed.
+ * The bitflips_threshold specify the maximum number of bitflips before
+ * considering the region as not erased.
+ *
+ * Note:
+ * 1/ ECC algorithms are working on pre-defined block sizes which are usually
+ * different from the NAND page size. When fixing bitflips, ECC engines will
+ * report the number of errors per chunk, and the NAND core infrastructure
+ * expect you to return the maximum number of bitflips for the whole page.
+ * This is why you should always use this function on a single chunk and
+ * not on the whole page. After checking each chunk you should update your
+ * max_bitflips value accordingly.
+ * 2/ When checking for bitflips in erased pages you should not only check
+ * the payload data but also their associated ECC data, because a user might
+ * have programmed almost all bits to 1 but a few. In this case, we
+ * shouldn't consider the chunk as erased, and checking ECC bytes prevent
+ * this case.
+ * 3/ The extraoob argument is optional, and should be used if some of your OOB
+ * data are protected by the ECC engine.
+ * It could also be used if you support subpages and want to attach some
+ * extra OOB data to an ECC chunk.
+ *
+ * Returns a positive number of bitflips less than or equal to
+ * bitflips_threshold, or -ERROR_CODE for bitflips in excess of the
+ * threshold. In case of success, the passed buffers are filled with 0xff.
+ */
+int nand_check_erased_ecc_chunk(void *data, int datalen,
+ void *ecc, int ecclen,
+ void *extraoob, int extraooblen,
+ int bitflips_threshold)
+{
+ int data_bitflips = 0, ecc_bitflips = 0, extraoob_bitflips = 0;
+
+ data_bitflips = nand_check_erased_buf(data, datalen,
+ bitflips_threshold);
+ if (data_bitflips < 0)
+ return data_bitflips;
+
+ bitflips_threshold -= data_bitflips;
+
+ ecc_bitflips = nand_check_erased_buf(ecc, ecclen, bitflips_threshold);
+ if (ecc_bitflips < 0)
+ return ecc_bitflips;
+
+ bitflips_threshold -= ecc_bitflips;
+
+ extraoob_bitflips = nand_check_erased_buf(extraoob, extraooblen,
+ bitflips_threshold);
+ if (extraoob_bitflips < 0)
+ return extraoob_bitflips;
+
+ if (data_bitflips)
+ memset(data, 0xff, datalen);
+
+ if (ecc_bitflips)
+ memset(ecc, 0xff, ecclen);
+
+ if (extraoob_bitflips)
+ memset(extraoob, 0xff, extraooblen);
+
+ return data_bitflips + ecc_bitflips + extraoob_bitflips;
+}
+EXPORT_SYMBOL(nand_check_erased_ecc_chunk);
+
+/**
* nand_read_page_raw - [INTERN] read raw page data without ecc
* @mtd: mtd info structure
* @chip: nand chip info structure
@@ -2028,11 +2162,12 @@ out:
* @chip: nand chip info structure
* @buf: data buffer
* @oob_required: must write chip->oob_poi to OOB
+ * @page: page number to write
*
* Not for syndrome calculating ECC controllers, which use a special oob layout.
*/
static int nand_write_page_raw(struct mtd_info *mtd, struct nand_chip *chip,
- const uint8_t *buf, int oob_required)
+ const uint8_t *buf, int oob_required, int page)
{
chip->write_buf(mtd, buf, mtd->writesize);
if (oob_required)
@@ -2047,12 +2182,14 @@ static int nand_write_page_raw(struct mtd_info *mtd, struct nand_chip *chip,
* @chip: nand chip info structure
* @buf: data buffer
* @oob_required: must write chip->oob_poi to OOB
+ * @page: page number to write
*
* We need a special oob layout and handling even when ECC isn't checked.
*/
static int nand_write_page_raw_syndrome(struct mtd_info *mtd,
struct nand_chip *chip,
- const uint8_t *buf, int oob_required)
+ const uint8_t *buf, int oob_required,
+ int page)
{
int eccsize = chip->ecc.size;
int eccbytes = chip->ecc.bytes;
@@ -2089,9 +2226,11 @@ static int nand_write_page_raw_syndrome(struct mtd_info *mtd,
* @chip: nand chip info structure
* @buf: data buffer
* @oob_required: must write chip->oob_poi to OOB
+ * @page: page number to write
*/
static int nand_write_page_swecc(struct mtd_info *mtd, struct nand_chip *chip,
- const uint8_t *buf, int oob_required)
+ const uint8_t *buf, int oob_required,
+ int page)
{
int i, eccsize = chip->ecc.size;
int eccbytes = chip->ecc.bytes;
@@ -2107,7 +2246,7 @@ static int nand_write_page_swecc(struct mtd_info *mtd, struct nand_chip *chip,
for (i = 0; i < chip->ecc.total; i++)
chip->oob_poi[eccpos[i]] = ecc_calc[i];
- return chip->ecc.write_page_raw(mtd, chip, buf, 1);
+ return chip->ecc.write_page_raw(mtd, chip, buf, 1, page);
}
/**
@@ -2116,9 +2255,11 @@ static int nand_write_page_swecc(struct mtd_info *mtd, struct nand_chip *chip,
* @chip: nand chip info structure
* @buf: data buffer
* @oob_required: must write chip->oob_poi to OOB
+ * @page: page number to write
*/
static int nand_write_page_hwecc(struct mtd_info *mtd, struct nand_chip *chip,
- const uint8_t *buf, int oob_required)
+ const uint8_t *buf, int oob_required,
+ int page)
{
int i, eccsize = chip->ecc.size;
int eccbytes = chip->ecc.bytes;
@@ -2150,11 +2291,12 @@ static int nand_write_page_hwecc(struct mtd_info *mtd, struct nand_chip *chip,
* @data_len: data length
* @buf: data buffer
* @oob_required: must write chip->oob_poi to OOB
+ * @page: page number to write
*/
static int nand_write_subpage_hwecc(struct mtd_info *mtd,
struct nand_chip *chip, uint32_t offset,
uint32_t data_len, const uint8_t *buf,
- int oob_required)
+ int oob_required, int page)
{
uint8_t *oob_buf = chip->oob_poi;
uint8_t *ecc_calc = chip->buffers->ecccalc;
@@ -2209,13 +2351,15 @@ static int nand_write_subpage_hwecc(struct mtd_info *mtd,
* @chip: nand chip info structure
* @buf: data buffer
* @oob_required: must write chip->oob_poi to OOB
+ * @page: page number to write
*
* The hw generator calculates the error syndrome automatically. Therefore we
* need a special oob layout and handling.
*/
static int nand_write_page_syndrome(struct mtd_info *mtd,
struct nand_chip *chip,
- const uint8_t *buf, int oob_required)
+ const uint8_t *buf, int oob_required,
+ int page)
{
int i, eccsize = chip->ecc.size;
int eccbytes = chip->ecc.bytes;
@@ -2279,12 +2423,13 @@ static int nand_write_page(struct mtd_info *mtd, struct nand_chip *chip,
if (unlikely(raw))
status = chip->ecc.write_page_raw(mtd, chip, buf,
- oob_required);
+ oob_required, page);
else if (subpage)
status = chip->ecc.write_subpage(mtd, chip, offset, data_len,
- buf, oob_required);
+ buf, oob_required, page);
else
- status = chip->ecc.write_page(mtd, chip, buf, oob_required);
+ status = chip->ecc.write_page(mtd, chip, buf, oob_required,
+ page);
if (status < 0)
return status;
@@ -2928,9 +3073,6 @@ static int nand_onfi_get_features(struct mtd_info *mtd, struct nand_chip *chip,
& ONFI_OPT_CMD_SET_GET_FEATURES))
return -EINVAL;
- /* clear the sub feature parameters */
- memset(subfeature_param, 0, ONFI_SUBFEATURE_PARAM_LEN);
-
chip->cmdfunc(mtd, NAND_CMD_GET_FEATURES, addr, -1);
for (i = 0; i < ONFI_SUBFEATURE_PARAM_LEN; ++i)
*subfeature_param++ = chip->read_byte(mtd);
@@ -2968,7 +3110,7 @@ static void nand_resume(struct mtd_info *mtd)
*/
static void nand_shutdown(struct mtd_info *mtd)
{
- nand_get_device(mtd, FL_SHUTDOWN);
+ nand_get_device(mtd, FL_PM_SUSPENDED);
}
/* Set default functions */
@@ -3689,7 +3831,7 @@ static struct nand_flash_dev *nand_get_flash_type(struct mtd_info *mtd,
if (find_full_id_nand(mtd, chip, type, id_data, &busw))
goto ident_done;
} else if (*dev_id == type->dev_id) {
- break;
+ break;
}
}
@@ -3712,10 +3854,7 @@ static struct nand_flash_dev *nand_get_flash_type(struct mtd_info *mtd,
chip->chipsize = (uint64_t)type->chipsize << 20;
- if (!type->pagesize && chip->init_size) {
- /* Set the pagesize, oobsize, erasesize by the driver */
- busw = chip->init_size(mtd, chip, id_data);
- } else if (!type->pagesize) {
+ if (!type->pagesize) {
/* Decode parameters from extended ID */
nand_decode_ext_id(mtd, chip, id_data, &busw);
} else {
@@ -3798,6 +3937,39 @@ ident_done:
return type;
}
+static int nand_dt_init(struct mtd_info *mtd, struct nand_chip *chip,
+ struct device_node *dn)
+{
+ int ecc_mode, ecc_strength, ecc_step;
+
+ if (of_get_nand_bus_width(dn) == 16)
+ chip->options |= NAND_BUSWIDTH_16;
+
+ if (of_get_nand_on_flash_bbt(dn))
+ chip->bbt_options |= NAND_BBT_USE_FLASH;
+
+ ecc_mode = of_get_nand_ecc_mode(dn);
+ ecc_strength = of_get_nand_ecc_strength(dn);
+ ecc_step = of_get_nand_ecc_step_size(dn);
+
+ if ((ecc_step >= 0 && !(ecc_strength >= 0)) ||
+ (!(ecc_step >= 0) && ecc_strength >= 0)) {
+ pr_err("must set both strength and step size in DT\n");
+ return -EINVAL;
+ }
+
+ if (ecc_mode >= 0)
+ chip->ecc.mode = ecc_mode;
+
+ if (ecc_strength >= 0)
+ chip->ecc.strength = ecc_strength;
+
+ if (ecc_step > 0)
+ chip->ecc.size = ecc_step;
+
+ return 0;
+}
+
/**
* nand_scan_ident - [NAND Interface] Scan for the NAND device
* @mtd: MTD device structure
@@ -3815,6 +3987,16 @@ int nand_scan_ident(struct mtd_info *mtd, int maxchips,
int i, nand_maf_id, nand_dev_id;
struct nand_chip *chip = mtd->priv;
struct nand_flash_dev *type;
+ int ret;
+
+ if (chip->flash_node) {
+ ret = nand_dt_init(mtd, chip, chip->flash_node);
+ if (ret)
+ return ret;
+ }
+
+ if (!mtd->name && mtd->dev.parent)
+ mtd->name = dev_name(mtd->dev.parent);
/* Set the default functions */
nand_set_defaults(chip, chip->options & NAND_BUSWIDTH_16);