1 files changed, 31 insertions, 14 deletions

diff --git a/kernel/drivers/mtd/nand/davinci_nand.c b/kernel/drivers/mtd/nand/davinci_nand.c
index feb6d18de..c72313d66 100644
--- a/kernel/drivers/mtd/nand/davinci_nand.c
+++ b/kernel/drivers/mtd/nand/davinci_nand.c
@@ -520,6 +520,32 @@ static struct nand_ecclayout hwecc4_2048 = {
 	},
 };
 
+/*
+ * An ECC layout for using 4-bit ECC with large-page (4096bytes) flash,
+ * storing ten ECC bytes plus the manufacturer's bad block marker byte,
+ * and not overlapping the default BBT markers.
+ */
+static struct nand_ecclayout hwecc4_4096 = {
+	.eccbytes = 80,
+	.eccpos = {
+		/* at the end of spare sector */
+		48, 49, 50, 51, 52, 53, 54, 55, 56, 57,
+		58, 59, 60, 61, 62, 63, 64, 65, 66, 67,
+		68, 69, 70, 71, 72, 73, 74, 75, 76, 77,
+		78, 79, 80, 81, 82, 83, 84, 85, 86, 87,
+		88, 89, 90, 91, 92, 93, 94, 95, 96, 97,
+		98, 99, 100, 101, 102, 103, 104, 105, 106, 107,
+		108, 109, 110, 111, 112, 113, 114, 115, 116, 117,
+		118, 119, 120, 121, 122, 123, 124, 125, 126, 127,
+	},
+	.oobfree = {
+		/* 2 bytes at offset 0 hold manufacturer badblock markers */
+		{.offset = 2, .length = 46, },
+		/* 5 bytes at offset 8 hold BBT markers */
+		/* 8 bytes at offset 16 hold JFFS2 clean markers */
+	},
+};
+
 #if defined(CONFIG_OF)
 static const struct of_device_id davinci_nand_of_match[] = {
 	{.compatible = "ti,davinci-nand", },
@@ -657,9 +683,6 @@ static int nand_davinci_probe(struct platform_device *pdev)
 	info->vaddr		= vaddr;
 
 	info->mtd.priv		= &info->chip;
-	info->mtd.name		= dev_name(&pdev->dev);
-	info->mtd.owner		= THIS_MODULE;
-
 	info->mtd.dev.parent	= &pdev->dev;
 
 	info->chip.IO_ADDR_R	= vaddr;
@@ -796,18 +819,12 @@ static int nand_davinci_probe(struct platform_device *pdev)
 			info->chip.ecc.mode = NAND_ECC_HW_OOB_FIRST;
 			goto syndrome_done;
 		}
+		if (chunks == 8) {
+			info->ecclayout = hwecc4_4096;
+			info->chip.ecc.mode = NAND_ECC_HW_OOB_FIRST;
+			goto syndrome_done;
+		}
 
-		/* 4KiB page chips are not yet supported. The eccpos from
-		 * nand_ecclayout cannot hold 80 bytes and change to eccpos[]
-		 * breaks userspace ioctl interface with mtd-utils. Once we
-		 * resolve this issue, NAND_ECC_HW_OOB_FIRST mode can be used
-		 * for the 4KiB page chips.
-		 *
-		 * TODO: Note that nand_ecclayout has now been expanded and can
-		 *  hold plenty of OOB entries.
-		 */
-		dev_warn(&pdev->dev, "no 4-bit ECC support yet "
-				"for 4KiB-page NAND\n");
 		ret = -EIO;
 		goto err;