summaryrefslogtreecommitdiffstats
path: root/kernel/drivers/mtd/devices
diff options
context:
space:
mode:
Diffstat (limited to 'kernel/drivers/mtd/devices')
-rw-r--r--kernel/drivers/mtd/devices/Kconfig228
-rw-r--r--kernel/drivers/mtd/devices/Makefile21
-rw-r--r--kernel/drivers/mtd/devices/bcm47xxsflash.c339
-rw-r--r--kernel/drivers/mtd/devices/bcm47xxsflash.h76
-rw-r--r--kernel/drivers/mtd/devices/block2mtd.c500
-rw-r--r--kernel/drivers/mtd/devices/docg3.c2141
-rw-r--r--kernel/drivers/mtd/devices/docg3.h370
-rw-r--r--kernel/drivers/mtd/devices/lart.c685
-rw-r--r--kernel/drivers/mtd/devices/m25p80.c332
-rw-r--r--kernel/drivers/mtd/devices/ms02-nv.c311
-rw-r--r--kernel/drivers/mtd/devices/ms02-nv.h105
-rw-r--r--kernel/drivers/mtd/devices/mtd_dataflash.c928
-rw-r--r--kernel/drivers/mtd/devices/mtdram.c158
-rw-r--r--kernel/drivers/mtd/devices/phram.c328
-rw-r--r--kernel/drivers/mtd/devices/pmc551.c856
-rw-r--r--kernel/drivers/mtd/devices/serial_flash_cmds.h61
-rw-r--r--kernel/drivers/mtd/devices/slram.c347
-rw-r--r--kernel/drivers/mtd/devices/spear_smi.c1092
-rw-r--r--kernel/drivers/mtd/devices/sst25l.c431
-rw-r--r--kernel/drivers/mtd/devices/st_spi_fsm.c2178
20 files changed, 11487 insertions, 0 deletions
diff --git a/kernel/drivers/mtd/devices/Kconfig b/kernel/drivers/mtd/devices/Kconfig
new file mode 100644
index 000000000..c49d0b127
--- /dev/null
+++ b/kernel/drivers/mtd/devices/Kconfig
@@ -0,0 +1,228 @@
+menu "Self-contained MTD device drivers"
+ depends on MTD!=n
+ depends on HAS_IOMEM
+
+config MTD_PMC551
+ tristate "Ramix PMC551 PCI Mezzanine RAM card support"
+ depends on PCI
+ ---help---
+ This provides a MTD device driver for the Ramix PMC551 RAM PCI card
+ from Ramix Inc. <http://www.ramix.com/products/memory/pmc551.html>.
+ These devices come in memory configurations from 32M - 1G. If you
+ have one, you probably want to enable this.
+
+ If this driver is compiled as a module you get the ability to select
+ the size of the aperture window pointing into the devices memory.
+ What this means is that if you have a 1G card, normally the kernel
+ will use a 1G memory map as its view of the device. As a module,
+ you can select a 1M window into the memory and the driver will
+ "slide" the window around the PMC551's memory. This was
+ particularly useful on the 2.2 kernels on PPC architectures as there
+ was limited kernel space to deal with.
+
+config MTD_PMC551_BUGFIX
+ bool "PMC551 256M DRAM Bugfix"
+ depends on MTD_PMC551
+ help
+ Some of Ramix's PMC551 boards with 256M configurations have invalid
+ column and row mux values. This option will fix them, but will
+ break other memory configurations. If unsure say N.
+
+config MTD_PMC551_DEBUG
+ bool "PMC551 Debugging"
+ depends on MTD_PMC551
+ help
+ This option makes the PMC551 more verbose during its operation and
+ is only really useful if you are developing on this driver or
+ suspect a possible hardware or driver bug. If unsure say N.
+
+config MTD_MS02NV
+ tristate "DEC MS02-NV NVRAM module support"
+ depends on MACH_DECSTATION
+ help
+ This is an MTD driver for the DEC's MS02-NV (54-20948-01) battery
+ backed-up NVRAM module. The module was originally meant as an NFS
+ accelerator. Say Y here if you have a DECstation 5000/2x0 or a
+ DECsystem 5900 equipped with such a module.
+
+ If you want to compile this driver as a module ( = code which can be
+ inserted in and removed from the running kernel whenever you want),
+ say M here and read <file:Documentation/kbuild/modules.txt>.
+ The module will be called ms02-nv.
+
+config MTD_DATAFLASH
+ tristate "Support for AT45xxx DataFlash"
+ depends on SPI_MASTER
+ help
+ This enables access to AT45xxx DataFlash chips, using SPI.
+ Sometimes DataFlash chips are packaged inside MMC-format
+ cards; at this writing, the MMC stack won't handle those.
+
+config MTD_DATAFLASH_WRITE_VERIFY
+ bool "Verify DataFlash page writes"
+ depends on MTD_DATAFLASH
+ help
+ This adds an extra check when data is written to the flash.
+ It may help if you are verifying chip setup (timings etc) on
+ your board. There is a rare possibility that even though the
+ device thinks the write was successful, a bit could have been
+ flipped accidentally due to device wear or something else.
+
+config MTD_DATAFLASH_OTP
+ bool "DataFlash OTP support (Security Register)"
+ depends on MTD_DATAFLASH
+ help
+ Newer DataFlash chips (revisions C and D) support 128 bytes of
+ one-time-programmable (OTP) data. The first half may be written
+ (once) with up to 64 bytes of data, such as a serial number or
+ other key product data. The second half is programmed with a
+ unique-to-each-chip bit pattern at the factory.
+
+config MTD_M25P80
+ tristate "Support most SPI Flash chips (AT26DF, M25P, W25X, ...)"
+ depends on SPI_MASTER && MTD_SPI_NOR
+ help
+ This enables access to most modern SPI flash chips, used for
+ program and data storage. Series supported include Atmel AT26DF,
+ Spansion S25SL, SST 25VF, ST M25P, and Winbond W25X. Other chips
+ are supported as well. See the driver source for the current list,
+ or to add other chips.
+
+ Note that the original DataFlash chips (AT45 series, not AT26DF),
+ need an entirely different driver.
+
+ Set up your spi devices with the right board-specific platform data,
+ if you want to specify device partitioning or to use a device which
+ doesn't support the JEDEC ID instruction.
+
+config MTD_SPEAR_SMI
+ tristate "SPEAR MTD NOR Support through SMI controller"
+ depends on PLAT_SPEAR
+ default y
+ help
+ This enable SNOR support on SPEAR platforms using SMI controller
+
+config MTD_SST25L
+ tristate "Support SST25L (non JEDEC) SPI Flash chips"
+ depends on SPI_MASTER
+ help
+ This enables access to the non JEDEC SST25L SPI flash chips, used
+ for program and data storage.
+
+ Set up your spi devices with the right board-specific platform data,
+ if you want to specify device partitioning.
+
+config MTD_BCM47XXSFLASH
+ tristate "R/O support for serial flash on BCMA bus"
+ depends on BCMA_SFLASH
+ help
+ BCMA bus can have various flash memories attached, they are
+ registered by bcma as platform devices. This enables driver for
+ serial flash memories (only read-only mode is implemented).
+
+config MTD_SLRAM
+ tristate "Uncached system RAM"
+ help
+ If your CPU cannot cache all of the physical memory in your machine,
+ you can still use it for storage or swap by using this driver to
+ present it to the system as a Memory Technology Device.
+
+config MTD_PHRAM
+ tristate "Physical system RAM"
+ help
+ This is a re-implementation of the slram driver above.
+
+ Use this driver to access physical memory that the kernel proper
+ doesn't have access to, memory beyond the mem=xxx limit, nvram,
+ memory on the video card, etc...
+
+config MTD_LART
+ tristate "28F160xx flash driver for LART"
+ depends on SA1100_LART
+ help
+ This enables the flash driver for LART. Please note that you do
+ not need any mapping/chip driver for LART. This one does it all
+ for you, so go disable all of those if you enabled some of them (:
+
+config MTD_MTDRAM
+ tristate "Test driver using RAM"
+ help
+ This enables a test MTD device driver which uses vmalloc() to
+ provide storage. You probably want to say 'N' unless you're
+ testing stuff.
+
+config MTDRAM_TOTAL_SIZE
+ int "MTDRAM device size in KiB"
+ depends on MTD_MTDRAM
+ default "4096"
+ help
+ This allows you to configure the total size of the MTD device
+ emulated by the MTDRAM driver. If the MTDRAM driver is built
+ as a module, it is also possible to specify this as a parameter when
+ loading the module.
+
+config MTDRAM_ERASE_SIZE
+ int "MTDRAM erase block size in KiB"
+ depends on MTD_MTDRAM
+ default "128"
+ help
+ This allows you to configure the size of the erase blocks in the
+ device emulated by the MTDRAM driver. If the MTDRAM driver is built
+ as a module, it is also possible to specify this as a parameter when
+ loading the module.
+
+#If not a module (I don't want to test it as a module)
+config MTDRAM_ABS_POS
+ hex "SRAM Hexadecimal Absolute position or 0"
+ depends on MTD_MTDRAM=y
+ default "0"
+ help
+ If you have system RAM accessible by the CPU but not used by Linux
+ in normal operation, you can give the physical address at which the
+ available RAM starts, and the MTDRAM driver will use it instead of
+ allocating space from Linux's available memory. Otherwise, leave
+ this set to zero. Most people will want to leave this as zero.
+
+config MTD_BLOCK2MTD
+ tristate "MTD using block device"
+ depends on BLOCK
+ help
+ This driver allows a block device to appear as an MTD. It would
+ generally be used in the following cases:
+
+ Using Compact Flash as an MTD, these usually present themselves to
+ the system as an ATA drive.
+ Testing MTD users (eg JFFS2) on large media and media that might
+ be removed during a write (using the floppy drive).
+
+comment "Disk-On-Chip Device Drivers"
+
+config MTD_DOCG3
+ tristate "M-Systems Disk-On-Chip G3"
+ select BCH
+ select BCH_CONST_PARAMS
+ select BITREVERSE
+ ---help---
+ This provides an MTD device driver for the M-Systems DiskOnChip
+ G3 devices.
+
+ The driver provides access to G3 DiskOnChip, distributed by
+ M-Systems and now Sandisk. The support is very experimental,
+ and doesn't give access to any write operations.
+
+config MTD_ST_SPI_FSM
+ tristate "ST Microelectronics SPI FSM Serial Flash Controller"
+ depends on ARCH_STI
+ help
+ This provides an MTD device driver for the ST Microelectronics
+ SPI Fast Sequence Mode (FSM) Serial Flash Controller and support
+ for a subset of connected Serial Flash devices.
+
+if MTD_DOCG3
+config BCH_CONST_M
+ default 14
+config BCH_CONST_T
+ default 4
+endif
+
+endmenu
diff --git a/kernel/drivers/mtd/devices/Makefile b/kernel/drivers/mtd/devices/Makefile
new file mode 100644
index 000000000..f0b0e611d
--- /dev/null
+++ b/kernel/drivers/mtd/devices/Makefile
@@ -0,0 +1,21 @@
+#
+# linux/drivers/mtd/devices/Makefile
+#
+
+obj-$(CONFIG_MTD_DOCG3) += docg3.o
+obj-$(CONFIG_MTD_SLRAM) += slram.o
+obj-$(CONFIG_MTD_PHRAM) += phram.o
+obj-$(CONFIG_MTD_PMC551) += pmc551.o
+obj-$(CONFIG_MTD_MS02NV) += ms02-nv.o
+obj-$(CONFIG_MTD_MTDRAM) += mtdram.o
+obj-$(CONFIG_MTD_LART) += lart.o
+obj-$(CONFIG_MTD_BLOCK2MTD) += block2mtd.o
+obj-$(CONFIG_MTD_DATAFLASH) += mtd_dataflash.o
+obj-$(CONFIG_MTD_M25P80) += m25p80.o
+obj-$(CONFIG_MTD_SPEAR_SMI) += spear_smi.o
+obj-$(CONFIG_MTD_SST25L) += sst25l.o
+obj-$(CONFIG_MTD_BCM47XXSFLASH) += bcm47xxsflash.o
+obj-$(CONFIG_MTD_ST_SPI_FSM) += st_spi_fsm.o
+
+
+CFLAGS_docg3.o += -I$(src)
diff --git a/kernel/drivers/mtd/devices/bcm47xxsflash.c b/kernel/drivers/mtd/devices/bcm47xxsflash.c
new file mode 100644
index 000000000..3d008a941
--- /dev/null
+++ b/kernel/drivers/mtd/devices/bcm47xxsflash.c
@@ -0,0 +1,339 @@
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+#include <linux/mtd/mtd.h>
+#include <linux/platform_device.h>
+#include <linux/bcma/bcma.h>
+
+#include "bcm47xxsflash.h"
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("Serial flash driver for BCMA bus");
+
+static const char * const probes[] = { "bcm47xxpart", NULL };
+
+/**************************************************
+ * Various helpers
+ **************************************************/
+
+static void bcm47xxsflash_cmd(struct bcm47xxsflash *b47s, u32 opcode)
+{
+ int i;
+
+ b47s->cc_write(b47s, BCMA_CC_FLASHCTL, BCMA_CC_FLASHCTL_START | opcode);
+ for (i = 0; i < 1000; i++) {
+ if (!(b47s->cc_read(b47s, BCMA_CC_FLASHCTL) &
+ BCMA_CC_FLASHCTL_BUSY))
+ return;
+ cpu_relax();
+ }
+ pr_err("Control command failed (timeout)!\n");
+}
+
+static int bcm47xxsflash_poll(struct bcm47xxsflash *b47s, int timeout)
+{
+ unsigned long deadline = jiffies + timeout;
+
+ do {
+ switch (b47s->type) {
+ case BCM47XXSFLASH_TYPE_ST:
+ bcm47xxsflash_cmd(b47s, OPCODE_ST_RDSR);
+ if (!(b47s->cc_read(b47s, BCMA_CC_FLASHDATA) &
+ SR_ST_WIP))
+ return 0;
+ break;
+ case BCM47XXSFLASH_TYPE_ATMEL:
+ bcm47xxsflash_cmd(b47s, OPCODE_AT_STATUS);
+ if (b47s->cc_read(b47s, BCMA_CC_FLASHDATA) &
+ SR_AT_READY)
+ return 0;
+ break;
+ }
+
+ cpu_relax();
+ udelay(1);
+ } while (!time_after_eq(jiffies, deadline));
+
+ pr_err("Timeout waiting for flash to be ready!\n");
+
+ return -EBUSY;
+}
+
+/**************************************************
+ * MTD ops
+ **************************************************/
+
+static int bcm47xxsflash_erase(struct mtd_info *mtd, struct erase_info *erase)
+{
+ struct bcm47xxsflash *b47s = mtd->priv;
+ int err;
+
+ switch (b47s->type) {
+ case BCM47XXSFLASH_TYPE_ST:
+ bcm47xxsflash_cmd(b47s, OPCODE_ST_WREN);
+ b47s->cc_write(b47s, BCMA_CC_FLASHADDR, erase->addr);
+ /* Newer flashes have "sub-sectors" which can be erased
+ * independently with a new command: ST_SSE. The ST_SE command
+ * erases 64KB just as before.
+ */
+ if (b47s->blocksize < (64 * 1024))
+ bcm47xxsflash_cmd(b47s, OPCODE_ST_SSE);
+ else
+ bcm47xxsflash_cmd(b47s, OPCODE_ST_SE);
+ break;
+ case BCM47XXSFLASH_TYPE_ATMEL:
+ b47s->cc_write(b47s, BCMA_CC_FLASHADDR, erase->addr << 1);
+ bcm47xxsflash_cmd(b47s, OPCODE_AT_PAGE_ERASE);
+ break;
+ }
+
+ err = bcm47xxsflash_poll(b47s, HZ);
+ if (err)
+ erase->state = MTD_ERASE_FAILED;
+ else
+ erase->state = MTD_ERASE_DONE;
+
+ if (erase->callback)
+ erase->callback(erase);
+
+ return err;
+}
+
+static int bcm47xxsflash_read(struct mtd_info *mtd, loff_t from, size_t len,
+ size_t *retlen, u_char *buf)
+{
+ struct bcm47xxsflash *b47s = mtd->priv;
+
+ /* Check address range */
+ if ((from + len) > mtd->size)
+ return -EINVAL;
+
+ memcpy_fromio(buf, (void __iomem *)KSEG0ADDR(b47s->window + from),
+ len);
+ *retlen = len;
+
+ return len;
+}
+
+static int bcm47xxsflash_write_st(struct mtd_info *mtd, u32 offset, size_t len,
+ const u_char *buf)
+{
+ struct bcm47xxsflash *b47s = mtd->priv;
+ int written = 0;
+
+ /* Enable writes */
+ bcm47xxsflash_cmd(b47s, OPCODE_ST_WREN);
+
+ /* Write first byte */
+ b47s->cc_write(b47s, BCMA_CC_FLASHADDR, offset);
+ b47s->cc_write(b47s, BCMA_CC_FLASHDATA, *buf++);
+
+ /* Program page */
+ if (b47s->bcma_cc->core->id.rev < 20) {
+ bcm47xxsflash_cmd(b47s, OPCODE_ST_PP);
+ return 1; /* 1B written */
+ }
+
+ /* Program page and set CSA (on newer chips we can continue writing) */
+ bcm47xxsflash_cmd(b47s, OPCODE_ST_CSA | OPCODE_ST_PP);
+ offset++;
+ len--;
+ written++;
+
+ while (len > 0) {
+ /* Page boundary, another function call is needed */
+ if ((offset & 0xFF) == 0)
+ break;
+
+ bcm47xxsflash_cmd(b47s, OPCODE_ST_CSA | *buf++);
+ offset++;
+ len--;
+ written++;
+ }
+
+ /* All done, drop CSA & poll */
+ b47s->cc_write(b47s, BCMA_CC_FLASHCTL, 0);
+ udelay(1);
+ if (bcm47xxsflash_poll(b47s, HZ / 10))
+ pr_err("Flash rejected dropping CSA\n");
+
+ return written;
+}
+
+static int bcm47xxsflash_write_at(struct mtd_info *mtd, u32 offset, size_t len,
+ const u_char *buf)
+{
+ struct bcm47xxsflash *b47s = mtd->priv;
+ u32 mask = b47s->blocksize - 1;
+ u32 page = (offset & ~mask) << 1;
+ u32 byte = offset & mask;
+ int written = 0;
+
+ /* If we don't overwrite whole page, read it to the buffer first */
+ if (byte || (len < b47s->blocksize)) {
+ int err;
+
+ b47s->cc_write(b47s, BCMA_CC_FLASHADDR, page);
+ bcm47xxsflash_cmd(b47s, OPCODE_AT_BUF1_LOAD);
+ /* 250 us for AT45DB321B */
+ err = bcm47xxsflash_poll(b47s, HZ / 1000);
+ if (err) {
+ pr_err("Timeout reading page 0x%X info buffer\n", page);
+ return err;
+ }
+ }
+
+ /* Change buffer content with our data */
+ while (len > 0) {
+ /* Page boundary, another function call is needed */
+ if (byte == b47s->blocksize)
+ break;
+
+ b47s->cc_write(b47s, BCMA_CC_FLASHADDR, byte++);
+ b47s->cc_write(b47s, BCMA_CC_FLASHDATA, *buf++);
+ bcm47xxsflash_cmd(b47s, OPCODE_AT_BUF1_WRITE);
+ len--;
+ written++;
+ }
+
+ /* Program page with the buffer content */
+ b47s->cc_write(b47s, BCMA_CC_FLASHADDR, page);
+ bcm47xxsflash_cmd(b47s, OPCODE_AT_BUF1_PROGRAM);
+
+ return written;
+}
+
+static int bcm47xxsflash_write(struct mtd_info *mtd, loff_t to, size_t len,
+ size_t *retlen, const u_char *buf)
+{
+ struct bcm47xxsflash *b47s = mtd->priv;
+ int written;
+
+ /* Writing functions can return without writing all passed data, for
+ * example when the hardware is too old or when we git page boundary.
+ */
+ while (len > 0) {
+ switch (b47s->type) {
+ case BCM47XXSFLASH_TYPE_ST:
+ written = bcm47xxsflash_write_st(mtd, to, len, buf);
+ break;
+ case BCM47XXSFLASH_TYPE_ATMEL:
+ written = bcm47xxsflash_write_at(mtd, to, len, buf);
+ break;
+ default:
+ BUG_ON(1);
+ }
+ if (written < 0) {
+ pr_err("Error writing at offset 0x%llX\n", to);
+ return written;
+ }
+ to += (loff_t)written;
+ len -= written;
+ *retlen += written;
+ buf += written;
+ }
+
+ return 0;
+}
+
+static void bcm47xxsflash_fill_mtd(struct bcm47xxsflash *b47s)
+{
+ struct mtd_info *mtd = &b47s->mtd;
+
+ mtd->priv = b47s;
+ mtd->name = "bcm47xxsflash";
+ mtd->owner = THIS_MODULE;
+
+ mtd->type = MTD_NORFLASH;
+ mtd->flags = MTD_CAP_NORFLASH;
+ mtd->size = b47s->size;
+ mtd->erasesize = b47s->blocksize;
+ mtd->writesize = 1;
+ mtd->writebufsize = 1;
+
+ mtd->_erase = bcm47xxsflash_erase;
+ mtd->_read = bcm47xxsflash_read;
+ mtd->_write = bcm47xxsflash_write;
+}
+
+/**************************************************
+ * BCMA
+ **************************************************/
+
+static int bcm47xxsflash_bcma_cc_read(struct bcm47xxsflash *b47s, u16 offset)
+{
+ return bcma_cc_read32(b47s->bcma_cc, offset);
+}
+
+static void bcm47xxsflash_bcma_cc_write(struct bcm47xxsflash *b47s, u16 offset,
+ u32 value)
+{
+ bcma_cc_write32(b47s->bcma_cc, offset, value);
+}
+
+static int bcm47xxsflash_bcma_probe(struct platform_device *pdev)
+{
+ struct bcma_sflash *sflash = dev_get_platdata(&pdev->dev);
+ struct bcm47xxsflash *b47s;
+ int err;
+
+ b47s = devm_kzalloc(&pdev->dev, sizeof(*b47s), GFP_KERNEL);
+ if (!b47s)
+ return -ENOMEM;
+ sflash->priv = b47s;
+
+ b47s->bcma_cc = container_of(sflash, struct bcma_drv_cc, sflash);
+ b47s->cc_read = bcm47xxsflash_bcma_cc_read;
+ b47s->cc_write = bcm47xxsflash_bcma_cc_write;
+
+ switch (b47s->bcma_cc->capabilities & BCMA_CC_CAP_FLASHT) {
+ case BCMA_CC_FLASHT_STSER:
+ b47s->type = BCM47XXSFLASH_TYPE_ST;
+ break;
+ case BCMA_CC_FLASHT_ATSER:
+ b47s->type = BCM47XXSFLASH_TYPE_ATMEL;
+ break;
+ }
+
+ b47s->window = sflash->window;
+ b47s->blocksize = sflash->blocksize;
+ b47s->numblocks = sflash->numblocks;
+ b47s->size = sflash->size;
+ bcm47xxsflash_fill_mtd(b47s);
+
+ err = mtd_device_parse_register(&b47s->mtd, probes, NULL, NULL, 0);
+ if (err) {
+ pr_err("Failed to register MTD device: %d\n", err);
+ return err;
+ }
+
+ if (bcm47xxsflash_poll(b47s, HZ / 10))
+ pr_warn("Serial flash busy\n");
+
+ return 0;
+}
+
+static int bcm47xxsflash_bcma_remove(struct platform_device *pdev)
+{
+ struct bcma_sflash *sflash = dev_get_platdata(&pdev->dev);
+ struct bcm47xxsflash *b47s = sflash->priv;
+
+ mtd_device_unregister(&b47s->mtd);
+
+ return 0;
+}
+
+static struct platform_driver bcma_sflash_driver = {
+ .probe = bcm47xxsflash_bcma_probe,
+ .remove = bcm47xxsflash_bcma_remove,
+ .driver = {
+ .name = "bcma_sflash",
+ },
+};
+
+/**************************************************
+ * Init
+ **************************************************/
+
+module_platform_driver(bcma_sflash_driver);
diff --git a/kernel/drivers/mtd/devices/bcm47xxsflash.h b/kernel/drivers/mtd/devices/bcm47xxsflash.h
new file mode 100644
index 000000000..fe93daf4f
--- /dev/null
+++ b/kernel/drivers/mtd/devices/bcm47xxsflash.h
@@ -0,0 +1,76 @@
+#ifndef __BCM47XXSFLASH_H
+#define __BCM47XXSFLASH_H
+
+#include <linux/mtd/mtd.h>
+
+/* Used for ST flashes only. */
+#define OPCODE_ST_WREN 0x0006 /* Write Enable */
+#define OPCODE_ST_WRDIS 0x0004 /* Write Disable */
+#define OPCODE_ST_RDSR 0x0105 /* Read Status Register */
+#define OPCODE_ST_WRSR 0x0101 /* Write Status Register */
+#define OPCODE_ST_READ 0x0303 /* Read Data Bytes */
+#define OPCODE_ST_PP 0x0302 /* Page Program */
+#define OPCODE_ST_SE 0x02d8 /* Sector Erase */
+#define OPCODE_ST_BE 0x00c7 /* Bulk Erase */
+#define OPCODE_ST_DP 0x00b9 /* Deep Power-down */
+#define OPCODE_ST_RES 0x03ab /* Read Electronic Signature */
+#define OPCODE_ST_CSA 0x1000 /* Keep chip select asserted */
+#define OPCODE_ST_SSE 0x0220 /* Sub-sector Erase */
+
+/* Used for Atmel flashes only. */
+#define OPCODE_AT_READ 0x07e8
+#define OPCODE_AT_PAGE_READ 0x07d2
+#define OPCODE_AT_STATUS 0x01d7
+#define OPCODE_AT_BUF1_WRITE 0x0384
+#define OPCODE_AT_BUF2_WRITE 0x0387
+#define OPCODE_AT_BUF1_ERASE_PROGRAM 0x0283
+#define OPCODE_AT_BUF2_ERASE_PROGRAM 0x0286
+#define OPCODE_AT_BUF1_PROGRAM 0x0288
+#define OPCODE_AT_BUF2_PROGRAM 0x0289
+#define OPCODE_AT_PAGE_ERASE 0x0281
+#define OPCODE_AT_BLOCK_ERASE 0x0250
+#define OPCODE_AT_BUF1_WRITE_ERASE_PROGRAM 0x0382
+#define OPCODE_AT_BUF2_WRITE_ERASE_PROGRAM 0x0385
+#define OPCODE_AT_BUF1_LOAD 0x0253
+#define OPCODE_AT_BUF2_LOAD 0x0255
+#define OPCODE_AT_BUF1_COMPARE 0x0260
+#define OPCODE_AT_BUF2_COMPARE 0x0261
+#define OPCODE_AT_BUF1_REPROGRAM 0x0258
+#define OPCODE_AT_BUF2_REPROGRAM 0x0259
+
+/* Status register bits for ST flashes */
+#define SR_ST_WIP 0x01 /* Write In Progress */
+#define SR_ST_WEL 0x02 /* Write Enable Latch */
+#define SR_ST_BP_MASK 0x1c /* Block Protect */
+#define SR_ST_BP_SHIFT 2
+#define SR_ST_SRWD 0x80 /* Status Register Write Disable */
+
+/* Status register bits for Atmel flashes */
+#define SR_AT_READY 0x80
+#define SR_AT_MISMATCH 0x40
+#define SR_AT_ID_MASK 0x38
+#define SR_AT_ID_SHIFT 3
+
+struct bcma_drv_cc;
+
+enum bcm47xxsflash_type {
+ BCM47XXSFLASH_TYPE_ATMEL,
+ BCM47XXSFLASH_TYPE_ST,
+};
+
+struct bcm47xxsflash {
+ struct bcma_drv_cc *bcma_cc;
+ int (*cc_read)(struct bcm47xxsflash *b47s, u16 offset);
+ void (*cc_write)(struct bcm47xxsflash *b47s, u16 offset, u32 value);
+
+ enum bcm47xxsflash_type type;
+
+ u32 window;
+ u32 blocksize;
+ u16 numblocks;
+ u32 size;
+
+ struct mtd_info mtd;
+};
+
+#endif /* BCM47XXSFLASH */
diff --git a/kernel/drivers/mtd/devices/block2mtd.c b/kernel/drivers/mtd/devices/block2mtd.c
new file mode 100644
index 000000000..b16f3cda9
--- /dev/null
+++ b/kernel/drivers/mtd/devices/block2mtd.c
@@ -0,0 +1,500 @@
+/*
+ * block2mtd.c - create an mtd from a block device
+ *
+ * Copyright (C) 2001,2002 Simon Evans <spse@secret.org.uk>
+ * Copyright (C) 2004-2006 Joern Engel <joern@wh.fh-wedel.de>
+ *
+ * Licence: GPL
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+/*
+ * When the first attempt at device initialization fails, we may need to
+ * wait a little bit and retry. This timeout, by default 3 seconds, gives
+ * device time to start up. Required on BCM2708 and a few other chipsets.
+ */
+#define MTD_DEFAULT_TIMEOUT 3
+
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/fs.h>
+#include <linux/blkdev.h>
+#include <linux/bio.h>
+#include <linux/pagemap.h>
+#include <linux/list.h>
+#include <linux/init.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mutex.h>
+#include <linux/mount.h>
+#include <linux/slab.h>
+#include <linux/major.h>
+
+/* Info for the block device */
+struct block2mtd_dev {
+ struct list_head list;
+ struct block_device *blkdev;
+ struct mtd_info mtd;
+ struct mutex write_mutex;
+};
+
+
+/* Static info about the MTD, used in cleanup_module */
+static LIST_HEAD(blkmtd_device_list);
+
+
+static struct page *page_read(struct address_space *mapping, int index)
+{
+ return read_mapping_page(mapping, index, NULL);
+}
+
+/* erase a specified part of the device */
+static int _block2mtd_erase(struct block2mtd_dev *dev, loff_t to, size_t len)
+{
+ struct address_space *mapping = dev->blkdev->bd_inode->i_mapping;
+ struct page *page;
+ int index = to >> PAGE_SHIFT; // page index
+ int pages = len >> PAGE_SHIFT;
+ u_long *p;
+ u_long *max;
+
+ while (pages) {
+ page = page_read(mapping, index);
+ if (IS_ERR(page))
+ return PTR_ERR(page);
+
+ max = page_address(page) + PAGE_SIZE;
+ for (p=page_address(page); p<max; p++)
+ if (*p != -1UL) {
+ lock_page(page);
+ memset(page_address(page), 0xff, PAGE_SIZE);
+ set_page_dirty(page);
+ unlock_page(page);
+ balance_dirty_pages_ratelimited(mapping);
+ break;
+ }
+
+ page_cache_release(page);
+ pages--;
+ index++;
+ }
+ return 0;
+}
+static int block2mtd_erase(struct mtd_info *mtd, struct erase_info *instr)
+{
+ struct block2mtd_dev *dev = mtd->priv;
+ size_t from = instr->addr;
+ size_t len = instr->len;
+ int err;
+
+ instr->state = MTD_ERASING;
+ mutex_lock(&dev->write_mutex);
+ err = _block2mtd_erase(dev, from, len);
+ mutex_unlock(&dev->write_mutex);
+ if (err) {
+ pr_err("erase failed err = %d\n", err);
+ instr->state = MTD_ERASE_FAILED;
+ } else
+ instr->state = MTD_ERASE_DONE;
+
+ mtd_erase_callback(instr);
+ return err;
+}
+
+
+static int block2mtd_read(struct mtd_info *mtd, loff_t from, size_t len,
+ size_t *retlen, u_char *buf)
+{
+ struct block2mtd_dev *dev = mtd->priv;
+ struct page *page;
+ int index = from >> PAGE_SHIFT;
+ int offset = from & (PAGE_SIZE-1);
+ int cpylen;
+
+ while (len) {
+ if ((offset + len) > PAGE_SIZE)
+ cpylen = PAGE_SIZE - offset; // multiple pages
+ else
+ cpylen = len; // this page
+ len = len - cpylen;
+
+ page = page_read(dev->blkdev->bd_inode->i_mapping, index);
+ if (IS_ERR(page))
+ return PTR_ERR(page);
+
+ memcpy(buf, page_address(page) + offset, cpylen);
+ page_cache_release(page);
+
+ if (retlen)
+ *retlen += cpylen;
+ buf += cpylen;
+ offset = 0;
+ index++;
+ }
+ return 0;
+}
+
+
+/* write data to the underlying device */
+static int _block2mtd_write(struct block2mtd_dev *dev, const u_char *buf,
+ loff_t to, size_t len, size_t *retlen)
+{
+ struct page *page;
+ struct address_space *mapping = dev->blkdev->bd_inode->i_mapping;
+ int index = to >> PAGE_SHIFT; // page index
+ int offset = to & ~PAGE_MASK; // page offset
+ int cpylen;
+
+ while (len) {
+ if ((offset+len) > PAGE_SIZE)
+ cpylen = PAGE_SIZE - offset; // multiple pages
+ else
+ cpylen = len; // this page
+ len = len - cpylen;
+
+ page = page_read(mapping, index);
+ if (IS_ERR(page))
+ return PTR_ERR(page);
+
+ if (memcmp(page_address(page)+offset, buf, cpylen)) {
+ lock_page(page);
+ memcpy(page_address(page) + offset, buf, cpylen);
+ set_page_dirty(page);
+ unlock_page(page);
+ balance_dirty_pages_ratelimited(mapping);
+ }
+ page_cache_release(page);
+
+ if (retlen)
+ *retlen += cpylen;
+
+ buf += cpylen;
+ offset = 0;
+ index++;
+ }
+ return 0;
+}
+
+
+static int block2mtd_write(struct mtd_info *mtd, loff_t to, size_t len,
+ size_t *retlen, const u_char *buf)
+{
+ struct block2mtd_dev *dev = mtd->priv;
+ int err;
+
+ mutex_lock(&dev->write_mutex);
+ err = _block2mtd_write(dev, buf, to, len, retlen);
+ mutex_unlock(&dev->write_mutex);
+ if (err > 0)
+ err = 0;
+ return err;
+}
+
+
+/* sync the device - wait until the write queue is empty */
+static void block2mtd_sync(struct mtd_info *mtd)
+{
+ struct block2mtd_dev *dev = mtd->priv;
+ sync_blockdev(dev->blkdev);
+ return;
+}
+
+
+static void block2mtd_free_device(struct block2mtd_dev *dev)
+{
+ if (!dev)
+ return;
+
+ kfree(dev->mtd.name);
+
+ if (dev->blkdev) {
+ invalidate_mapping_pages(dev->blkdev->bd_inode->i_mapping,
+ 0, -1);
+ blkdev_put(dev->blkdev, FMODE_READ|FMODE_WRITE|FMODE_EXCL);
+ }
+
+ kfree(dev);
+}
+
+
+static struct block2mtd_dev *add_device(char *devname, int erase_size,
+ int timeout)
+{
+#ifndef MODULE
+ int i;
+#endif
+ const fmode_t mode = FMODE_READ | FMODE_WRITE | FMODE_EXCL;
+ struct block_device *bdev = ERR_PTR(-ENODEV);
+ struct block2mtd_dev *dev;
+ char *name;
+
+ if (!devname)
+ return NULL;
+
+ dev = kzalloc(sizeof(struct block2mtd_dev), GFP_KERNEL);
+ if (!dev)
+ return NULL;
+
+ /* Get a handle on the device */
+ bdev = blkdev_get_by_path(devname, mode, dev);
+
+#ifndef MODULE
+ /*
+ * We might not have the root device mounted at this point.
+ * Try to resolve the device name by other means.
+ */
+ for (i = 0; IS_ERR(bdev) && i <= timeout; i++) {
+ dev_t devt;
+
+ if (i)
+ /*
+ * Calling wait_for_device_probe in the first loop
+ * was not enough, sleep for a bit in subsequent
+ * go-arounds.
+ */
+ msleep(1000);
+ wait_for_device_probe();
+
+ devt = name_to_dev_t(devname);
+ if (!devt)
+ continue;
+ bdev = blkdev_get_by_dev(devt, mode, dev);
+ }
+#endif
+
+ if (IS_ERR(bdev)) {
+ pr_err("error: cannot open device %s\n", devname);
+ goto err_free_block2mtd;
+ }
+ dev->blkdev = bdev;
+
+ if (MAJOR(bdev->bd_dev) == MTD_BLOCK_MAJOR) {
+ pr_err("attempting to use an MTD device as a block device\n");
+ goto err_free_block2mtd;
+ }
+
+ if ((long)dev->blkdev->bd_inode->i_size % erase_size) {
+ pr_err("erasesize must be a divisor of device size\n");
+ goto err_free_block2mtd;
+ }
+
+ mutex_init(&dev->write_mutex);
+
+ /* Setup the MTD structure */
+ /* make the name contain the block device in */
+ name = kasprintf(GFP_KERNEL, "block2mtd: %s", devname);
+ if (!name)
+ goto err_destroy_mutex;
+
+ dev->mtd.name = name;
+
+ dev->mtd.size = dev->blkdev->bd_inode->i_size & PAGE_MASK;
+ dev->mtd.erasesize = erase_size;
+ dev->mtd.writesize = 1;
+ dev->mtd.writebufsize = PAGE_SIZE;
+ dev->mtd.type = MTD_RAM;
+ dev->mtd.flags = MTD_CAP_RAM;
+ dev->mtd._erase = block2mtd_erase;
+ dev->mtd._write = block2mtd_write;
+ dev->mtd._sync = block2mtd_sync;
+ dev->mtd._read = block2mtd_read;
+ dev->mtd.priv = dev;
+ dev->mtd.owner = THIS_MODULE;
+
+ if (mtd_device_register(&dev->mtd, NULL, 0)) {
+ /* Device didn't get added, so free the entry */
+ goto err_destroy_mutex;
+ }
+
+ list_add(&dev->list, &blkmtd_device_list);
+ pr_info("mtd%d: [%s] erase_size = %dKiB [%d]\n",
+ dev->mtd.index,
+ dev->mtd.name + strlen("block2mtd: "),
+ dev->mtd.erasesize >> 10, dev->mtd.erasesize);
+ return dev;
+
+err_destroy_mutex:
+ mutex_destroy(&dev->write_mutex);
+err_free_block2mtd:
+ block2mtd_free_device(dev);
+ return NULL;
+}
+
+
+/* This function works similar to reguler strtoul. In addition, it
+ * allows some suffixes for a more human-readable number format:
+ * ki, Ki, kiB, KiB - multiply result with 1024
+ * Mi, MiB - multiply result with 1024^2
+ * Gi, GiB - multiply result with 1024^3
+ */
+static int ustrtoul(const char *cp, char **endp, unsigned int base)
+{
+ unsigned long result = simple_strtoul(cp, endp, base);
+ switch (**endp) {
+ case 'G' :
+ result *= 1024;
+ case 'M':
+ result *= 1024;
+ case 'K':
+ case 'k':
+ result *= 1024;
+ /* By dwmw2 editorial decree, "ki", "Mi" or "Gi" are to be used. */
+ if ((*endp)[1] == 'i') {
+ if ((*endp)[2] == 'B')
+ (*endp) += 3;
+ else
+ (*endp) += 2;
+ }
+ }
+ return result;
+}
+
+
+static int parse_num(size_t *num, const char *token)
+{
+ char *endp;
+ size_t n;
+
+ n = (size_t) ustrtoul(token, &endp, 0);
+ if (*endp)
+ return -EINVAL;
+
+ *num = n;
+ return 0;
+}
+
+
+static inline void kill_final_newline(char *str)
+{
+ char *newline = strrchr(str, '\n');
+ if (newline && !newline[1])
+ *newline = 0;
+}
+
+
+#ifndef MODULE
+static int block2mtd_init_called = 0;
+/* 80 for device, 12 for erase size */
+static char block2mtd_paramline[80 + 12];
+#endif
+
+static int block2mtd_setup2(const char *val)
+{
+ /* 80 for device, 12 for erase size, 80 for name, 8 for timeout */
+ char buf[80 + 12 + 80 + 8];
+ char *str = buf;
+ char *token[2];
+ char *name;
+ size_t erase_size = PAGE_SIZE;
+ unsigned long timeout = MTD_DEFAULT_TIMEOUT;
+ int i, ret;
+
+ if (strnlen(val, sizeof(buf)) >= sizeof(buf)) {
+ pr_err("parameter too long\n");
+ return 0;
+ }
+
+ strcpy(str, val);
+ kill_final_newline(str);
+
+ for (i = 0; i < 2; i++)
+ token[i] = strsep(&str, ",");
+
+ if (str) {
+ pr_err("too many arguments\n");
+ return 0;
+ }
+
+ if (!token[0]) {
+ pr_err("no argument\n");
+ return 0;
+ }
+
+ name = token[0];
+ if (strlen(name) + 1 > 80) {
+ pr_err("device name too long\n");
+ return 0;
+ }
+
+ if (token[1]) {
+ ret = parse_num(&erase_size, token[1]);
+ if (ret) {
+ pr_err("illegal erase size\n");
+ return 0;
+ }
+ }
+
+ add_device(name, erase_size, timeout);
+
+ return 0;
+}
+
+
+static int block2mtd_setup(const char *val, struct kernel_param *kp)
+{
+#ifdef MODULE
+ return block2mtd_setup2(val);
+#else
+ /* If more parameters are later passed in via
+ /sys/module/block2mtd/parameters/block2mtd
+ and block2mtd_init() has already been called,
+ we can parse the argument now. */
+
+ if (block2mtd_init_called)
+ return block2mtd_setup2(val);
+
+ /* During early boot stage, we only save the parameters
+ here. We must parse them later: if the param passed
+ from kernel boot command line, block2mtd_setup() is
+ called so early that it is not possible to resolve
+ the device (even kmalloc() fails). Deter that work to
+ block2mtd_setup2(). */
+
+ strlcpy(block2mtd_paramline, val, sizeof(block2mtd_paramline));
+
+ return 0;
+#endif
+}
+
+
+module_param_call(block2mtd, block2mtd_setup, NULL, NULL, 0200);
+MODULE_PARM_DESC(block2mtd, "Device to use. \"block2mtd=<dev>[,<erasesize>]\"");
+
+static int __init block2mtd_init(void)
+{
+ int ret = 0;
+
+#ifndef MODULE
+ if (strlen(block2mtd_paramline))
+ ret = block2mtd_setup2(block2mtd_paramline);
+ block2mtd_init_called = 1;
+#endif
+
+ return ret;
+}
+
+
+static void block2mtd_exit(void)
+{
+ struct list_head *pos, *next;
+
+ /* Remove the MTD devices */
+ list_for_each_safe(pos, next, &blkmtd_device_list) {
+ struct block2mtd_dev *dev = list_entry(pos, typeof(*dev), list);
+ block2mtd_sync(&dev->mtd);
+ mtd_device_unregister(&dev->mtd);
+ mutex_destroy(&dev->write_mutex);
+ pr_info("mtd%d: [%s] removed\n",
+ dev->mtd.index,
+ dev->mtd.name + strlen("block2mtd: "));
+ list_del(&dev->list);
+ block2mtd_free_device(dev);
+ }
+}
+
+late_initcall(block2mtd_init);
+module_exit(block2mtd_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Joern Engel <joern@lazybastard.org>");
+MODULE_DESCRIPTION("Emulate an MTD using a block device");
diff --git a/kernel/drivers/mtd/devices/docg3.c b/kernel/drivers/mtd/devices/docg3.c
new file mode 100644
index 000000000..866d31904
--- /dev/null
+++ b/kernel/drivers/mtd/devices/docg3.c
@@ -0,0 +1,2141 @@
+/*
+ * Handles the M-Systems DiskOnChip G3 chip
+ *
+ * Copyright (C) 2011 Robert Jarzmik
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/errno.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/string.h>
+#include <linux/slab.h>
+#include <linux/io.h>
+#include <linux/delay.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/bitmap.h>
+#include <linux/bitrev.h>
+#include <linux/bch.h>
+
+#include <linux/debugfs.h>
+#include <linux/seq_file.h>
+
+#define CREATE_TRACE_POINTS
+#include "docg3.h"
+
+/*
+ * This driver handles the DiskOnChip G3 flash memory.
+ *
+ * As no specification is available from M-Systems/Sandisk, this drivers lacks
+ * several functions available on the chip, as :
+ * - IPL write
+ *
+ * The bus data width (8bits versus 16bits) is not handled (if_cfg flag), and
+ * the driver assumes a 16bits data bus.
+ *
+ * DocG3 relies on 2 ECC algorithms, which are handled in hardware :
+ * - a 1 byte Hamming code stored in the OOB for each page
+ * - a 7 bytes BCH code stored in the OOB for each page
+ * The BCH ECC is :
+ * - BCH is in GF(2^14)
+ * - BCH is over data of 520 bytes (512 page + 7 page_info bytes
+ * + 1 hamming byte)
+ * - BCH can correct up to 4 bits (t = 4)
+ * - BCH syndroms are calculated in hardware, and checked in hardware as well
+ *
+ */
+
+static unsigned int reliable_mode;
+module_param(reliable_mode, uint, 0);
+MODULE_PARM_DESC(reliable_mode, "Set the docg3 mode (0=normal MLC, 1=fast, "
+ "2=reliable) : MLC normal operations are in normal mode");
+
+/**
+ * struct docg3_oobinfo - DiskOnChip G3 OOB layout
+ * @eccbytes: 8 bytes are used (1 for Hamming ECC, 7 for BCH ECC)
+ * @eccpos: ecc positions (byte 7 is Hamming ECC, byte 8-14 are BCH ECC)
+ * @oobfree: free pageinfo bytes (byte 0 until byte 6, byte 15
+ * @oobavail: 8 available bytes remaining after ECC toll
+ */
+static struct nand_ecclayout docg3_oobinfo = {
+ .eccbytes = 8,
+ .eccpos = {7, 8, 9, 10, 11, 12, 13, 14},
+ .oobfree = {{0, 7}, {15, 1} },
+ .oobavail = 8,
+};
+
+static inline u8 doc_readb(struct docg3 *docg3, u16 reg)
+{
+ u8 val = readb(docg3->cascade->base + reg);
+
+ trace_docg3_io(0, 8, reg, (int)val);
+ return val;
+}
+
+static inline u16 doc_readw(struct docg3 *docg3, u16 reg)
+{
+ u16 val = readw(docg3->cascade->base + reg);
+
+ trace_docg3_io(0, 16, reg, (int)val);
+ return val;
+}
+
+static inline void doc_writeb(struct docg3 *docg3, u8 val, u16 reg)
+{
+ writeb(val, docg3->cascade->base + reg);
+ trace_docg3_io(1, 8, reg, val);
+}
+
+static inline void doc_writew(struct docg3 *docg3, u16 val, u16 reg)
+{
+ writew(val, docg3->cascade->base + reg);
+ trace_docg3_io(1, 16, reg, val);
+}
+
+static inline void doc_flash_command(struct docg3 *docg3, u8 cmd)
+{
+ doc_writeb(docg3, cmd, DOC_FLASHCOMMAND);
+}
+
+static inline void doc_flash_sequence(struct docg3 *docg3, u8 seq)
+{
+ doc_writeb(docg3, seq, DOC_FLASHSEQUENCE);
+}
+
+static inline void doc_flash_address(struct docg3 *docg3, u8 addr)
+{
+ doc_writeb(docg3, addr, DOC_FLASHADDRESS);
+}
+
+static char const * const part_probes[] = { "cmdlinepart", "saftlpart", NULL };
+
+static int doc_register_readb(struct docg3 *docg3, int reg)
+{
+ u8 val;
+
+ doc_writew(docg3, reg, DOC_READADDRESS);
+ val = doc_readb(docg3, reg);
+ doc_vdbg("Read register %04x : %02x\n", reg, val);
+ return val;
+}
+
+static int doc_register_readw(struct docg3 *docg3, int reg)
+{
+ u16 val;
+
+ doc_writew(docg3, reg, DOC_READADDRESS);
+ val = doc_readw(docg3, reg);
+ doc_vdbg("Read register %04x : %04x\n", reg, val);
+ return val;
+}
+
+/**
+ * doc_delay - delay docg3 operations
+ * @docg3: the device
+ * @nbNOPs: the number of NOPs to issue
+ *
+ * As no specification is available, the right timings between chip commands are
+ * unknown. The only available piece of information are the observed nops on a
+ * working docg3 chip.
+ * Therefore, doc_delay relies on a busy loop of NOPs, instead of scheduler
+ * friendlier msleep() functions or blocking mdelay().
+ */
+static void doc_delay(struct docg3 *docg3, int nbNOPs)
+{
+ int i;
+
+ doc_vdbg("NOP x %d\n", nbNOPs);
+ for (i = 0; i < nbNOPs; i++)
+ doc_writeb(docg3, 0, DOC_NOP);
+}
+
+static int is_prot_seq_error(struct docg3 *docg3)
+{
+ int ctrl;
+
+ ctrl = doc_register_readb(docg3, DOC_FLASHCONTROL);
+ return ctrl & (DOC_CTRL_PROTECTION_ERROR | DOC_CTRL_SEQUENCE_ERROR);
+}
+
+static int doc_is_ready(struct docg3 *docg3)
+{
+ int ctrl;
+
+ ctrl = doc_register_readb(docg3, DOC_FLASHCONTROL);
+ return ctrl & DOC_CTRL_FLASHREADY;
+}
+
+static int doc_wait_ready(struct docg3 *docg3)
+{
+ int maxWaitCycles = 100;
+
+ do {
+ doc_delay(docg3, 4);
+ cpu_relax();
+ } while (!doc_is_ready(docg3) && maxWaitCycles--);
+ doc_delay(docg3, 2);
+ if (maxWaitCycles > 0)
+ return 0;
+ else
+ return -EIO;
+}
+
+static int doc_reset_seq(struct docg3 *docg3)
+{
+ int ret;
+
+ doc_writeb(docg3, 0x10, DOC_FLASHCONTROL);
+ doc_flash_sequence(docg3, DOC_SEQ_RESET);
+ doc_flash_command(docg3, DOC_CMD_RESET);
+ doc_delay(docg3, 2);
+ ret = doc_wait_ready(docg3);
+
+ doc_dbg("doc_reset_seq() -> isReady=%s\n", ret ? "false" : "true");
+ return ret;
+}
+
+/**
+ * doc_read_data_area - Read data from data area
+ * @docg3: the device
+ * @buf: the buffer to fill in (might be NULL is dummy reads)
+ * @len: the length to read
+ * @first: first time read, DOC_READADDRESS should be set
+ *
+ * Reads bytes from flash data. Handles the single byte / even bytes reads.
+ */
+static void doc_read_data_area(struct docg3 *docg3, void *buf, int len,
+ int first)
+{
+ int i, cdr, len4;
+ u16 data16, *dst16;
+ u8 data8, *dst8;
+
+ doc_dbg("doc_read_data_area(buf=%p, len=%d)\n", buf, len);
+ cdr = len & 0x1;
+ len4 = len - cdr;
+
+ if (first)
+ doc_writew(docg3, DOC_IOSPACE_DATA, DOC_READADDRESS);
+ dst16 = buf;
+ for (i = 0; i < len4; i += 2) {
+ data16 = doc_readw(docg3, DOC_IOSPACE_DATA);
+ if (dst16) {
+ *dst16 = data16;
+ dst16++;
+ }
+ }
+
+ if (cdr) {
+ doc_writew(docg3, DOC_IOSPACE_DATA | DOC_READADDR_ONE_BYTE,
+ DOC_READADDRESS);
+ doc_delay(docg3, 1);
+ dst8 = (u8 *)dst16;
+ for (i = 0; i < cdr; i++) {
+ data8 = doc_readb(docg3, DOC_IOSPACE_DATA);
+ if (dst8) {
+ *dst8 = data8;
+ dst8++;
+ }
+ }
+ }
+}
+
+/**
+ * doc_write_data_area - Write data into data area
+ * @docg3: the device
+ * @buf: the buffer to get input bytes from
+ * @len: the length to write
+ *
+ * Writes bytes into flash data. Handles the single byte / even bytes writes.
+ */
+static void doc_write_data_area(struct docg3 *docg3, const void *buf, int len)
+{
+ int i, cdr, len4;
+ u16 *src16;
+ u8 *src8;
+
+ doc_dbg("doc_write_data_area(buf=%p, len=%d)\n", buf, len);
+ cdr = len & 0x3;
+ len4 = len - cdr;
+
+ doc_writew(docg3, DOC_IOSPACE_DATA, DOC_READADDRESS);
+ src16 = (u16 *)buf;
+ for (i = 0; i < len4; i += 2) {
+ doc_writew(docg3, *src16, DOC_IOSPACE_DATA);
+ src16++;
+ }
+
+ src8 = (u8 *)src16;
+ for (i = 0; i < cdr; i++) {
+ doc_writew(docg3, DOC_IOSPACE_DATA | DOC_READADDR_ONE_BYTE,
+ DOC_READADDRESS);
+ doc_writeb(docg3, *src8, DOC_IOSPACE_DATA);
+ src8++;
+ }
+}
+
+/**
+ * doc_set_data_mode - Sets the flash to normal or reliable data mode
+ * @docg3: the device
+ *
+ * The reliable data mode is a bit slower than the fast mode, but less errors
+ * occur. Entering the reliable mode cannot be done without entering the fast
+ * mode first.
+ *
+ * In reliable mode, pages 2*n and 2*n+1 are clones. Writing to page 0 of blocks
+ * (4,5) make the hardware write also to page 1 of blocks blocks(4,5). Reading
+ * from page 0 of blocks (4,5) or from page 1 of blocks (4,5) gives the same
+ * result, which is a logical and between bytes from page 0 and page 1 (which is
+ * consistent with the fact that writing to a page is _clearing_ bits of that
+ * page).
+ */
+static void doc_set_reliable_mode(struct docg3 *docg3)
+{
+ static char *strmode[] = { "normal", "fast", "reliable", "invalid" };
+
+ doc_dbg("doc_set_reliable_mode(%s)\n", strmode[docg3->reliable]);
+ switch (docg3->reliable) {
+ case 0:
+ break;
+ case 1:
+ doc_flash_sequence(docg3, DOC_SEQ_SET_FASTMODE);
+ doc_flash_command(docg3, DOC_CMD_FAST_MODE);
+ break;
+ case 2:
+ doc_flash_sequence(docg3, DOC_SEQ_SET_RELIABLEMODE);
+ doc_flash_command(docg3, DOC_CMD_FAST_MODE);
+ doc_flash_command(docg3, DOC_CMD_RELIABLE_MODE);
+ break;
+ default:
+ doc_err("doc_set_reliable_mode(): invalid mode\n");
+ break;
+ }
+ doc_delay(docg3, 2);
+}
+
+/**
+ * doc_set_asic_mode - Set the ASIC mode
+ * @docg3: the device
+ * @mode: the mode
+ *
+ * The ASIC can work in 3 modes :
+ * - RESET: all registers are zeroed
+ * - NORMAL: receives and handles commands
+ * - POWERDOWN: minimal poweruse, flash parts shut off
+ */
+static void doc_set_asic_mode(struct docg3 *docg3, u8 mode)
+{
+ int i;
+
+ for (i = 0; i < 12; i++)
+ doc_readb(docg3, DOC_IOSPACE_IPL);
+
+ mode |= DOC_ASICMODE_MDWREN;
+ doc_dbg("doc_set_asic_mode(%02x)\n", mode);
+ doc_writeb(docg3, mode, DOC_ASICMODE);
+ doc_writeb(docg3, ~mode, DOC_ASICMODECONFIRM);
+ doc_delay(docg3, 1);
+}
+
+/**
+ * doc_set_device_id - Sets the devices id for cascaded G3 chips
+ * @docg3: the device
+ * @id: the chip to select (amongst 0, 1, 2, 3)
+ *
+ * There can be 4 cascaded G3 chips. This function selects the one which will
+ * should be the active one.
+ */
+static void doc_set_device_id(struct docg3 *docg3, int id)
+{
+ u8 ctrl;
+
+ doc_dbg("doc_set_device_id(%d)\n", id);
+ doc_writeb(docg3, id, DOC_DEVICESELECT);
+ ctrl = doc_register_readb(docg3, DOC_FLASHCONTROL);
+
+ ctrl &= ~DOC_CTRL_VIOLATION;
+ ctrl |= DOC_CTRL_CE;
+ doc_writeb(docg3, ctrl, DOC_FLASHCONTROL);
+}
+
+/**
+ * doc_set_extra_page_mode - Change flash page layout
+ * @docg3: the device
+ *
+ * Normally, the flash page is split into the data (512 bytes) and the out of
+ * band data (16 bytes). For each, 4 more bytes can be accessed, where the wear
+ * leveling counters are stored. To access this last area of 4 bytes, a special
+ * mode must be input to the flash ASIC.
+ *
+ * Returns 0 if no error occurred, -EIO else.
+ */
+static int doc_set_extra_page_mode(struct docg3 *docg3)
+{
+ int fctrl;
+
+ doc_dbg("doc_set_extra_page_mode()\n");
+ doc_flash_sequence(docg3, DOC_SEQ_PAGE_SIZE_532);
+ doc_flash_command(docg3, DOC_CMD_PAGE_SIZE_532);
+ doc_delay(docg3, 2);
+
+ fctrl = doc_register_readb(docg3, DOC_FLASHCONTROL);
+ if (fctrl & (DOC_CTRL_PROTECTION_ERROR | DOC_CTRL_SEQUENCE_ERROR))
+ return -EIO;
+ else
+ return 0;
+}
+
+/**
+ * doc_setup_addr_sector - Setup blocks/page/ofs address for one plane
+ * @docg3: the device
+ * @sector: the sector
+ */
+static void doc_setup_addr_sector(struct docg3 *docg3, int sector)
+{
+ doc_delay(docg3, 1);
+ doc_flash_address(docg3, sector & 0xff);
+ doc_flash_address(docg3, (sector >> 8) & 0xff);
+ doc_flash_address(docg3, (sector >> 16) & 0xff);
+ doc_delay(docg3, 1);
+}
+
+/**
+ * doc_setup_writeaddr_sector - Setup blocks/page/ofs address for one plane
+ * @docg3: the device
+ * @sector: the sector
+ * @ofs: the offset in the page, between 0 and (512 + 16 + 512)
+ */
+static void doc_setup_writeaddr_sector(struct docg3 *docg3, int sector, int ofs)
+{
+ ofs = ofs >> 2;
+ doc_delay(docg3, 1);
+ doc_flash_address(docg3, ofs & 0xff);
+ doc_flash_address(docg3, sector & 0xff);
+ doc_flash_address(docg3, (sector >> 8) & 0xff);
+ doc_flash_address(docg3, (sector >> 16) & 0xff);
+ doc_delay(docg3, 1);
+}
+
+/**
+ * doc_seek - Set both flash planes to the specified block, page for reading
+ * @docg3: the device
+ * @block0: the first plane block index
+ * @block1: the second plane block index
+ * @page: the page index within the block
+ * @wear: if true, read will occur on the 4 extra bytes of the wear area
+ * @ofs: offset in page to read
+ *
+ * Programs the flash even and odd planes to the specific block and page.
+ * Alternatively, programs the flash to the wear area of the specified page.
+ */
+static int doc_read_seek(struct docg3 *docg3, int block0, int block1, int page,
+ int wear, int ofs)
+{
+ int sector, ret = 0;
+
+ doc_dbg("doc_seek(blocks=(%d,%d), page=%d, ofs=%d, wear=%d)\n",
+ block0, block1, page, ofs, wear);
+
+ if (!wear && (ofs < 2 * DOC_LAYOUT_PAGE_SIZE)) {
+ doc_flash_sequence(docg3, DOC_SEQ_SET_PLANE1);
+ doc_flash_command(docg3, DOC_CMD_READ_PLANE1);
+ doc_delay(docg3, 2);
+ } else {
+ doc_flash_sequence(docg3, DOC_SEQ_SET_PLANE2);
+ doc_flash_command(docg3, DOC_CMD_READ_PLANE2);
+ doc_delay(docg3, 2);
+ }
+
+ doc_set_reliable_mode(docg3);
+ if (wear)
+ ret = doc_set_extra_page_mode(docg3);
+ if (ret)
+ goto out;
+
+ doc_flash_sequence(docg3, DOC_SEQ_READ);
+ sector = (block0 << DOC_ADDR_BLOCK_SHIFT) + (page & DOC_ADDR_PAGE_MASK);
+ doc_flash_command(docg3, DOC_CMD_PROG_BLOCK_ADDR);
+ doc_setup_addr_sector(docg3, sector);
+
+ sector = (block1 << DOC_ADDR_BLOCK_SHIFT) + (page & DOC_ADDR_PAGE_MASK);
+ doc_flash_command(docg3, DOC_CMD_PROG_BLOCK_ADDR);
+ doc_setup_addr_sector(docg3, sector);
+ doc_delay(docg3, 1);
+
+out:
+ return ret;
+}
+
+/**
+ * doc_write_seek - Set both flash planes to the specified block, page for writing
+ * @docg3: the device
+ * @block0: the first plane block index
+ * @block1: the second plane block index
+ * @page: the page index within the block
+ * @ofs: offset in page to write
+ *
+ * Programs the flash even and odd planes to the specific block and page.
+ * Alternatively, programs the flash to the wear area of the specified page.
+ */
+static int doc_write_seek(struct docg3 *docg3, int block0, int block1, int page,
+ int ofs)
+{
+ int ret = 0, sector;
+
+ doc_dbg("doc_write_seek(blocks=(%d,%d), page=%d, ofs=%d)\n",
+ block0, block1, page, ofs);
+
+ doc_set_reliable_mode(docg3);
+
+ if (ofs < 2 * DOC_LAYOUT_PAGE_SIZE) {
+ doc_flash_sequence(docg3, DOC_SEQ_SET_PLANE1);
+ doc_flash_command(docg3, DOC_CMD_READ_PLANE1);
+ doc_delay(docg3, 2);
+ } else {
+ doc_flash_sequence(docg3, DOC_SEQ_SET_PLANE2);
+ doc_flash_command(docg3, DOC_CMD_READ_PLANE2);
+ doc_delay(docg3, 2);
+ }
+
+ doc_flash_sequence(docg3, DOC_SEQ_PAGE_SETUP);
+ doc_flash_command(docg3, DOC_CMD_PROG_CYCLE1);
+
+ sector = (block0 << DOC_ADDR_BLOCK_SHIFT) + (page & DOC_ADDR_PAGE_MASK);
+ doc_setup_writeaddr_sector(docg3, sector, ofs);
+
+ doc_flash_command(docg3, DOC_CMD_PROG_CYCLE3);
+ doc_delay(docg3, 2);
+ ret = doc_wait_ready(docg3);
+ if (ret)
+ goto out;
+
+ doc_flash_command(docg3, DOC_CMD_PROG_CYCLE1);
+ sector = (block1 << DOC_ADDR_BLOCK_SHIFT) + (page & DOC_ADDR_PAGE_MASK);
+ doc_setup_writeaddr_sector(docg3, sector, ofs);
+ doc_delay(docg3, 1);
+
+out:
+ return ret;
+}
+
+
+/**
+ * doc_read_page_ecc_init - Initialize hardware ECC engine
+ * @docg3: the device
+ * @len: the number of bytes covered by the ECC (BCH covered)
+ *
+ * The function does initialize the hardware ECC engine to compute the Hamming
+ * ECC (on 1 byte) and the BCH hardware ECC (on 7 bytes).
+ *
+ * Return 0 if succeeded, -EIO on error
+ */
+static int doc_read_page_ecc_init(struct docg3 *docg3, int len)
+{
+ doc_writew(docg3, DOC_ECCCONF0_READ_MODE
+ | DOC_ECCCONF0_BCH_ENABLE | DOC_ECCCONF0_HAMMING_ENABLE
+ | (len & DOC_ECCCONF0_DATA_BYTES_MASK),
+ DOC_ECCCONF0);
+ doc_delay(docg3, 4);
+ doc_register_readb(docg3, DOC_FLASHCONTROL);
+ return doc_wait_ready(docg3);
+}
+
+/**
+ * doc_write_page_ecc_init - Initialize hardware BCH ECC engine
+ * @docg3: the device
+ * @len: the number of bytes covered by the ECC (BCH covered)
+ *
+ * The function does initialize the hardware ECC engine to compute the Hamming
+ * ECC (on 1 byte) and the BCH hardware ECC (on 7 bytes).
+ *
+ * Return 0 if succeeded, -EIO on error
+ */
+static int doc_write_page_ecc_init(struct docg3 *docg3, int len)
+{
+ doc_writew(docg3, DOC_ECCCONF0_WRITE_MODE
+ | DOC_ECCCONF0_BCH_ENABLE | DOC_ECCCONF0_HAMMING_ENABLE
+ | (len & DOC_ECCCONF0_DATA_BYTES_MASK),
+ DOC_ECCCONF0);
+ doc_delay(docg3, 4);
+ doc_register_readb(docg3, DOC_FLASHCONTROL);
+ return doc_wait_ready(docg3);
+}
+
+/**
+ * doc_ecc_disable - Disable Hamming and BCH ECC hardware calculator
+ * @docg3: the device
+ *
+ * Disables the hardware ECC generator and checker, for unchecked reads (as when
+ * reading OOB only or write status byte).
+ */
+static void doc_ecc_disable(struct docg3 *docg3)
+{
+ doc_writew(docg3, DOC_ECCCONF0_READ_MODE, DOC_ECCCONF0);
+ doc_delay(docg3, 4);
+}
+
+/**
+ * doc_hamming_ecc_init - Initialize hardware Hamming ECC engine
+ * @docg3: the device
+ * @nb_bytes: the number of bytes covered by the ECC (Hamming covered)
+ *
+ * This function programs the ECC hardware to compute the hamming code on the
+ * last provided N bytes to the hardware generator.
+ */
+static void doc_hamming_ecc_init(struct docg3 *docg3, int nb_bytes)
+{
+ u8 ecc_conf1;
+
+ ecc_conf1 = doc_register_readb(docg3, DOC_ECCCONF1);
+ ecc_conf1 &= ~DOC_ECCCONF1_HAMMING_BITS_MASK;
+ ecc_conf1 |= (nb_bytes & DOC_ECCCONF1_HAMMING_BITS_MASK);
+ doc_writeb(docg3, ecc_conf1, DOC_ECCCONF1);
+}
+
+/**
+ * doc_ecc_bch_fix_data - Fix if need be read data from flash
+ * @docg3: the device
+ * @buf: the buffer of read data (512 + 7 + 1 bytes)
+ * @hwecc: the hardware calculated ECC.
+ * It's in fact recv_ecc ^ calc_ecc, where recv_ecc was read from OOB
+ * area data, and calc_ecc the ECC calculated by the hardware generator.
+ *
+ * Checks if the received data matches the ECC, and if an error is detected,
+ * tries to fix the bit flips (at most 4) in the buffer buf. As the docg3
+ * understands the (data, ecc, syndroms) in an inverted order in comparison to
+ * the BCH library, the function reverses the order of bits (ie. bit7 and bit0,
+ * bit6 and bit 1, ...) for all ECC data.
+ *
+ * The hardware ecc unit produces oob_ecc ^ calc_ecc. The kernel's bch
+ * algorithm is used to decode this. However the hw operates on page
+ * data in a bit order that is the reverse of that of the bch alg,
+ * requiring that the bits be reversed on the result. Thanks to Ivan
+ * Djelic for his analysis.
+ *
+ * Returns number of fixed bits (0, 1, 2, 3, 4) or -EBADMSG if too many bit
+ * errors were detected and cannot be fixed.
+ */
+static int doc_ecc_bch_fix_data(struct docg3 *docg3, void *buf, u8 *hwecc)
+{
+ u8 ecc[DOC_ECC_BCH_SIZE];
+ int errorpos[DOC_ECC_BCH_T], i, numerrs;
+
+ for (i = 0; i < DOC_ECC_BCH_SIZE; i++)
+ ecc[i] = bitrev8(hwecc[i]);
+ numerrs = decode_bch(docg3->cascade->bch, NULL,
+ DOC_ECC_BCH_COVERED_BYTES,
+ NULL, ecc, NULL, errorpos);
+ BUG_ON(numerrs == -EINVAL);
+ if (numerrs < 0)
+ goto out;
+
+ for (i = 0; i < numerrs; i++)
+ errorpos[i] = (errorpos[i] & ~7) | (7 - (errorpos[i] & 7));
+ for (i = 0; i < numerrs; i++)
+ if (errorpos[i] < DOC_ECC_BCH_COVERED_BYTES*8)
+ /* error is located in data, correct it */
+ change_bit(errorpos[i], buf);
+out:
+ doc_dbg("doc_ecc_bch_fix_data: flipped %d bits\n", numerrs);
+ return numerrs;
+}
+
+
+/**
+ * doc_read_page_prepare - Prepares reading data from a flash page
+ * @docg3: the device
+ * @block0: the first plane block index on flash memory
+ * @block1: the second plane block index on flash memory
+ * @page: the page index in the block
+ * @offset: the offset in the page (must be a multiple of 4)
+ *
+ * Prepares the page to be read in the flash memory :
+ * - tell ASIC to map the flash pages
+ * - tell ASIC to be in read mode
+ *
+ * After a call to this method, a call to doc_read_page_finish is mandatory,
+ * to end the read cycle of the flash.
+ *
+ * Read data from a flash page. The length to be read must be between 0 and
+ * (page_size + oob_size + wear_size), ie. 532, and a multiple of 4 (because
+ * the extra bytes reading is not implemented).
+ *
+ * As pages are grouped by 2 (in 2 planes), reading from a page must be done
+ * in two steps:
+ * - one read of 512 bytes at offset 0
+ * - one read of 512 bytes at offset 512 + 16
+ *
+ * Returns 0 if successful, -EIO if a read error occurred.
+ */
+static int doc_read_page_prepare(struct docg3 *docg3, int block0, int block1,
+ int page, int offset)
+{
+ int wear_area = 0, ret = 0;
+
+ doc_dbg("doc_read_page_prepare(blocks=(%d,%d), page=%d, ofsInPage=%d)\n",
+ block0, block1, page, offset);
+ if (offset >= DOC_LAYOUT_WEAR_OFFSET)
+ wear_area = 1;
+ if (!wear_area && offset > (DOC_LAYOUT_PAGE_OOB_SIZE * 2))
+ return -EINVAL;
+
+ doc_set_device_id(docg3, docg3->device_id);
+ ret = doc_reset_seq(docg3);
+ if (ret)
+ goto err;
+
+ /* Program the flash address block and page */
+ ret = doc_read_seek(docg3, block0, block1, page, wear_area, offset);
+ if (ret)
+ goto err;
+
+ doc_flash_command(docg3, DOC_CMD_READ_ALL_PLANES);
+ doc_delay(docg3, 2);
+ doc_wait_ready(docg3);
+
+ doc_flash_command(docg3, DOC_CMD_SET_ADDR_READ);
+ doc_delay(docg3, 1);
+ if (offset >= DOC_LAYOUT_PAGE_SIZE * 2)
+ offset -= 2 * DOC_LAYOUT_PAGE_SIZE;
+ doc_flash_address(docg3, offset >> 2);
+ doc_delay(docg3, 1);
+ doc_wait_ready(docg3);
+
+ doc_flash_command(docg3, DOC_CMD_READ_FLASH);
+
+ return 0;
+err:
+ doc_writeb(docg3, 0, DOC_DATAEND);
+ doc_delay(docg3, 2);
+ return -EIO;
+}
+
+/**
+ * doc_read_page_getbytes - Reads bytes from a prepared page
+ * @docg3: the device
+ * @len: the number of bytes to be read (must be a multiple of 4)
+ * @buf: the buffer to be filled in (or NULL is forget bytes)
+ * @first: 1 if first time read, DOC_READADDRESS should be set
+ * @last_odd: 1 if last read ended up on an odd byte
+ *
+ * Reads bytes from a prepared page. There is a trickery here : if the last read
+ * ended up on an odd offset in the 1024 bytes double page, ie. between the 2
+ * planes, the first byte must be read apart. If a word (16bit) read was used,
+ * the read would return the byte of plane 2 as low *and* high endian, which
+ * will mess the read.
+ *
+ */
+static int doc_read_page_getbytes(struct docg3 *docg3, int len, u_char *buf,
+ int first, int last_odd)
+{
+ if (last_odd && len > 0) {
+ doc_read_data_area(docg3, buf, 1, first);
+ doc_read_data_area(docg3, buf ? buf + 1 : buf, len - 1, 0);
+ } else {
+ doc_read_data_area(docg3, buf, len, first);
+ }
+ doc_delay(docg3, 2);
+ return len;
+}
+
+/**
+ * doc_write_page_putbytes - Writes bytes into a prepared page
+ * @docg3: the device
+ * @len: the number of bytes to be written
+ * @buf: the buffer of input bytes
+ *
+ */
+static void doc_write_page_putbytes(struct docg3 *docg3, int len,
+ const u_char *buf)
+{
+ doc_write_data_area(docg3, buf, len);
+ doc_delay(docg3, 2);
+}
+
+/**
+ * doc_get_bch_hw_ecc - Get hardware calculated BCH ECC
+ * @docg3: the device
+ * @hwecc: the array of 7 integers where the hardware ecc will be stored
+ */
+static void doc_get_bch_hw_ecc(struct docg3 *docg3, u8 *hwecc)
+{
+ int i;
+
+ for (i = 0; i < DOC_ECC_BCH_SIZE; i++)
+ hwecc[i] = doc_register_readb(docg3, DOC_BCH_HW_ECC(i));
+}
+
+/**
+ * doc_page_finish - Ends reading/writing of a flash page
+ * @docg3: the device
+ */
+static void doc_page_finish(struct docg3 *docg3)
+{
+ doc_writeb(docg3, 0, DOC_DATAEND);
+ doc_delay(docg3, 2);
+}
+
+/**
+ * doc_read_page_finish - Ends reading of a flash page
+ * @docg3: the device
+ *
+ * As a side effect, resets the chip selector to 0. This ensures that after each
+ * read operation, the floor 0 is selected. Therefore, if the systems halts, the
+ * reboot will boot on floor 0, where the IPL is.
+ */
+static void doc_read_page_finish(struct docg3 *docg3)
+{
+ doc_page_finish(docg3);
+ doc_set_device_id(docg3, 0);
+}
+
+/**
+ * calc_block_sector - Calculate blocks, pages and ofs.
+
+ * @from: offset in flash
+ * @block0: first plane block index calculated
+ * @block1: second plane block index calculated
+ * @page: page calculated
+ * @ofs: offset in page
+ * @reliable: 0 if docg3 in normal mode, 1 if docg3 in fast mode, 2 if docg3 in
+ * reliable mode.
+ *
+ * The calculation is based on the reliable/normal mode. In normal mode, the 64
+ * pages of a block are available. In reliable mode, as pages 2*n and 2*n+1 are
+ * clones, only 32 pages per block are available.
+ */
+static void calc_block_sector(loff_t from, int *block0, int *block1, int *page,
+ int *ofs, int reliable)
+{
+ uint sector, pages_biblock;
+
+ pages_biblock = DOC_LAYOUT_PAGES_PER_BLOCK * DOC_LAYOUT_NBPLANES;
+ if (reliable == 1 || reliable == 2)
+ pages_biblock /= 2;
+
+ sector = from / DOC_LAYOUT_PAGE_SIZE;
+ *block0 = sector / pages_biblock * DOC_LAYOUT_NBPLANES;
+ *block1 = *block0 + 1;
+ *page = sector % pages_biblock;
+ *page /= DOC_LAYOUT_NBPLANES;
+ if (reliable == 1 || reliable == 2)
+ *page *= 2;
+ if (sector % 2)
+ *ofs = DOC_LAYOUT_PAGE_OOB_SIZE;
+ else
+ *ofs = 0;
+}
+
+/**
+ * doc_read_oob - Read out of band bytes from flash
+ * @mtd: the device
+ * @from: the offset from first block and first page, in bytes, aligned on page
+ * size
+ * @ops: the mtd oob structure
+ *
+ * Reads flash memory OOB area of pages.
+ *
+ * Returns 0 if read successful, of -EIO, -EINVAL if an error occurred
+ */
+static int doc_read_oob(struct mtd_info *mtd, loff_t from,
+ struct mtd_oob_ops *ops)
+{
+ struct docg3 *docg3 = mtd->priv;
+ int block0, block1, page, ret, skip, ofs = 0;
+ u8 *oobbuf = ops->oobbuf;
+ u8 *buf = ops->datbuf;
+ size_t len, ooblen, nbdata, nboob;
+ u8 hwecc[DOC_ECC_BCH_SIZE], eccconf1;
+ int max_bitflips = 0;
+
+ if (buf)
+ len = ops->len;
+ else
+ len = 0;
+ if (oobbuf)
+ ooblen = ops->ooblen;
+ else
+ ooblen = 0;
+
+ if (oobbuf && ops->mode == MTD_OPS_PLACE_OOB)
+ oobbuf += ops->ooboffs;
+
+ doc_dbg("doc_read_oob(from=%lld, mode=%d, data=(%p:%zu), oob=(%p:%zu))\n",
+ from, ops->mode, buf, len, oobbuf, ooblen);
+ if (ooblen % DOC_LAYOUT_OOB_SIZE)
+ return -EINVAL;
+
+ if (from + len > mtd->size)
+ return -EINVAL;
+
+ ops->oobretlen = 0;
+ ops->retlen = 0;
+ ret = 0;
+ skip = from % DOC_LAYOUT_PAGE_SIZE;
+ mutex_lock(&docg3->cascade->lock);
+ while (ret >= 0 && (len > 0 || ooblen > 0)) {
+ calc_block_sector(from - skip, &block0, &block1, &page, &ofs,
+ docg3->reliable);
+ nbdata = min_t(size_t, len, DOC_LAYOUT_PAGE_SIZE - skip);
+ nboob = min_t(size_t, ooblen, (size_t)DOC_LAYOUT_OOB_SIZE);
+ ret = doc_read_page_prepare(docg3, block0, block1, page, ofs);
+ if (ret < 0)
+ goto out;
+ ret = doc_read_page_ecc_init(docg3, DOC_ECC_BCH_TOTAL_BYTES);
+ if (ret < 0)
+ goto err_in_read;
+ ret = doc_read_page_getbytes(docg3, skip, NULL, 1, 0);
+ if (ret < skip)
+ goto err_in_read;
+ ret = doc_read_page_getbytes(docg3, nbdata, buf, 0, skip % 2);
+ if (ret < nbdata)
+ goto err_in_read;
+ doc_read_page_getbytes(docg3,
+ DOC_LAYOUT_PAGE_SIZE - nbdata - skip,
+ NULL, 0, (skip + nbdata) % 2);
+ ret = doc_read_page_getbytes(docg3, nboob, oobbuf, 0, 0);
+ if (ret < nboob)
+ goto err_in_read;
+ doc_read_page_getbytes(docg3, DOC_LAYOUT_OOB_SIZE - nboob,
+ NULL, 0, nboob % 2);
+
+ doc_get_bch_hw_ecc(docg3, hwecc);
+ eccconf1 = doc_register_readb(docg3, DOC_ECCCONF1);
+
+ if (nboob >= DOC_LAYOUT_OOB_SIZE) {
+ doc_dbg("OOB - INFO: %*phC\n", 7, oobbuf);
+ doc_dbg("OOB - HAMMING: %02x\n", oobbuf[7]);
+ doc_dbg("OOB - BCH_ECC: %*phC\n", 7, oobbuf + 8);
+ doc_dbg("OOB - UNUSED: %02x\n", oobbuf[15]);
+ }
+ doc_dbg("ECC checks: ECCConf1=%x\n", eccconf1);
+ doc_dbg("ECC HW_ECC: %*phC\n", 7, hwecc);
+
+ ret = -EIO;
+ if (is_prot_seq_error(docg3))
+ goto err_in_read;
+ ret = 0;
+ if ((block0 >= DOC_LAYOUT_BLOCK_FIRST_DATA) &&
+ (eccconf1 & DOC_ECCCONF1_BCH_SYNDROM_ERR) &&
+ (eccconf1 & DOC_ECCCONF1_PAGE_IS_WRITTEN) &&
+ (ops->mode != MTD_OPS_RAW) &&
+ (nbdata == DOC_LAYOUT_PAGE_SIZE)) {
+ ret = doc_ecc_bch_fix_data(docg3, buf, hwecc);
+ if (ret < 0) {
+ mtd->ecc_stats.failed++;
+ ret = -EBADMSG;
+ }
+ if (ret > 0) {
+ mtd->ecc_stats.corrected += ret;
+ max_bitflips = max(max_bitflips, ret);
+ ret = max_bitflips;
+ }
+ }
+
+ doc_read_page_finish(docg3);
+ ops->retlen += nbdata;
+ ops->oobretlen += nboob;
+ buf += nbdata;
+ oobbuf += nboob;
+ len -= nbdata;
+ ooblen -= nboob;
+ from += DOC_LAYOUT_PAGE_SIZE;
+ skip = 0;
+ }
+
+out:
+ mutex_unlock(&docg3->cascade->lock);
+ return ret;
+err_in_read:
+ doc_read_page_finish(docg3);
+ goto out;
+}
+
+/**
+ * doc_read - Read bytes from flash
+ * @mtd: the device
+ * @from: the offset from first block and first page, in bytes, aligned on page
+ * size
+ * @len: the number of bytes to read (must be a multiple of 4)
+ * @retlen: the number of bytes actually read
+ * @buf: the filled in buffer
+ *
+ * Reads flash memory pages. This function does not read the OOB chunk, but only
+ * the page data.
+ *
+ * Returns 0 if read successful, of -EIO, -EINVAL if an error occurred
+ */
+static int doc_read(struct mtd_info *mtd, loff_t from, size_t len,
+ size_t *retlen, u_char *buf)
+{
+ struct mtd_oob_ops ops;
+ size_t ret;
+
+ memset(&ops, 0, sizeof(ops));
+ ops.datbuf = buf;
+ ops.len = len;
+ ops.mode = MTD_OPS_AUTO_OOB;
+
+ ret = doc_read_oob(mtd, from, &ops);
+ *retlen = ops.retlen;
+ return ret;
+}
+
+static int doc_reload_bbt(struct docg3 *docg3)
+{
+ int block = DOC_LAYOUT_BLOCK_BBT;
+ int ret = 0, nbpages, page;
+ u_char *buf = docg3->bbt;
+
+ nbpages = DIV_ROUND_UP(docg3->max_block + 1, 8 * DOC_LAYOUT_PAGE_SIZE);
+ for (page = 0; !ret && (page < nbpages); page++) {
+ ret = doc_read_page_prepare(docg3, block, block + 1,
+ page + DOC_LAYOUT_PAGE_BBT, 0);
+ if (!ret)
+ ret = doc_read_page_ecc_init(docg3,
+ DOC_LAYOUT_PAGE_SIZE);
+ if (!ret)
+ doc_read_page_getbytes(docg3, DOC_LAYOUT_PAGE_SIZE,
+ buf, 1, 0);
+ buf += DOC_LAYOUT_PAGE_SIZE;
+ }
+ doc_read_page_finish(docg3);
+ return ret;
+}
+
+/**
+ * doc_block_isbad - Checks whether a block is good or not
+ * @mtd: the device
+ * @from: the offset to find the correct block
+ *
+ * Returns 1 if block is bad, 0 if block is good
+ */
+static int doc_block_isbad(struct mtd_info *mtd, loff_t from)
+{
+ struct docg3 *docg3 = mtd->priv;
+ int block0, block1, page, ofs, is_good;
+
+ calc_block_sector(from, &block0, &block1, &page, &ofs,
+ docg3->reliable);
+ doc_dbg("doc_block_isbad(from=%lld) => block=(%d,%d), page=%d, ofs=%d\n",
+ from, block0, block1, page, ofs);
+
+ if (block0 < DOC_LAYOUT_BLOCK_FIRST_DATA)
+ return 0;
+ if (block1 > docg3->max_block)
+ return -EINVAL;
+
+ is_good = docg3->bbt[block0 >> 3] & (1 << (block0 & 0x7));
+ return !is_good;
+}
+
+#if 0
+/**
+ * doc_get_erase_count - Get block erase count
+ * @docg3: the device
+ * @from: the offset in which the block is.
+ *
+ * Get the number of times a block was erased. The number is the maximum of
+ * erase times between first and second plane (which should be equal normally).
+ *
+ * Returns The number of erases, or -EINVAL or -EIO on error.
+ */
+static int doc_get_erase_count(struct docg3 *docg3, loff_t from)
+{
+ u8 buf[DOC_LAYOUT_WEAR_SIZE];
+ int ret, plane1_erase_count, plane2_erase_count;
+ int block0, block1, page, ofs;
+
+ doc_dbg("doc_get_erase_count(from=%lld, buf=%p)\n", from, buf);
+ if (from % DOC_LAYOUT_PAGE_SIZE)
+ return -EINVAL;
+ calc_block_sector(from, &block0, &block1, &page, &ofs, docg3->reliable);
+ if (block1 > docg3->max_block)
+ return -EINVAL;
+
+ ret = doc_reset_seq(docg3);
+ if (!ret)
+ ret = doc_read_page_prepare(docg3, block0, block1, page,
+ ofs + DOC_LAYOUT_WEAR_OFFSET, 0);
+ if (!ret)
+ ret = doc_read_page_getbytes(docg3, DOC_LAYOUT_WEAR_SIZE,
+ buf, 1, 0);
+ doc_read_page_finish(docg3);
+
+ if (ret || (buf[0] != DOC_ERASE_MARK) || (buf[2] != DOC_ERASE_MARK))
+ return -EIO;
+ plane1_erase_count = (u8)(~buf[1]) | ((u8)(~buf[4]) << 8)
+ | ((u8)(~buf[5]) << 16);
+ plane2_erase_count = (u8)(~buf[3]) | ((u8)(~buf[6]) << 8)
+ | ((u8)(~buf[7]) << 16);
+
+ return max(plane1_erase_count, plane2_erase_count);
+}
+#endif
+
+/**
+ * doc_get_op_status - get erase/write operation status
+ * @docg3: the device
+ *
+ * Queries the status from the chip, and returns it
+ *
+ * Returns the status (bits DOC_PLANES_STATUS_*)
+ */
+static int doc_get_op_status(struct docg3 *docg3)
+{
+ u8 status;
+
+ doc_flash_sequence(docg3, DOC_SEQ_PLANES_STATUS);
+ doc_flash_command(docg3, DOC_CMD_PLANES_STATUS);
+ doc_delay(docg3, 5);
+
+ doc_ecc_disable(docg3);
+ doc_read_data_area(docg3, &status, 1, 1);
+ return status;
+}
+
+/**
+ * doc_write_erase_wait_status - wait for write or erase completion
+ * @docg3: the device
+ *
+ * Wait for the chip to be ready again after erase or write operation, and check
+ * erase/write status.
+ *
+ * Returns 0 if erase successful, -EIO if erase/write issue, -ETIMEOUT if
+ * timeout
+ */
+static int doc_write_erase_wait_status(struct docg3 *docg3)
+{
+ int i, status, ret = 0;
+
+ for (i = 0; !doc_is_ready(docg3) && i < 5; i++)
+ msleep(20);
+ if (!doc_is_ready(docg3)) {
+ doc_dbg("Timeout reached and the chip is still not ready\n");
+ ret = -EAGAIN;
+ goto out;
+ }
+
+ status = doc_get_op_status(docg3);
+ if (status & DOC_PLANES_STATUS_FAIL) {
+ doc_dbg("Erase/Write failed on (a) plane(s), status = %x\n",
+ status);
+ ret = -EIO;
+ }
+
+out:
+ doc_page_finish(docg3);
+ return ret;
+}
+
+/**
+ * doc_erase_block - Erase a couple of blocks
+ * @docg3: the device
+ * @block0: the first block to erase (leftmost plane)
+ * @block1: the second block to erase (rightmost plane)
+ *
+ * Erase both blocks, and return operation status
+ *
+ * Returns 0 if erase successful, -EIO if erase issue, -ETIMEOUT if chip not
+ * ready for too long
+ */
+static int doc_erase_block(struct docg3 *docg3, int block0, int block1)
+{
+ int ret, sector;
+
+ doc_dbg("doc_erase_block(blocks=(%d,%d))\n", block0, block1);
+ ret = doc_reset_seq(docg3);
+ if (ret)
+ return -EIO;
+
+ doc_set_reliable_mode(docg3);
+ doc_flash_sequence(docg3, DOC_SEQ_ERASE);
+
+ sector = block0 << DOC_ADDR_BLOCK_SHIFT;
+ doc_flash_command(docg3, DOC_CMD_PROG_BLOCK_ADDR);
+ doc_setup_addr_sector(docg3, sector);
+ sector = block1 << DOC_ADDR_BLOCK_SHIFT;
+ doc_flash_command(docg3, DOC_CMD_PROG_BLOCK_ADDR);
+ doc_setup_addr_sector(docg3, sector);
+ doc_delay(docg3, 1);
+
+ doc_flash_command(docg3, DOC_CMD_ERASECYCLE2);
+ doc_delay(docg3, 2);
+
+ if (is_prot_seq_error(docg3)) {
+ doc_err("Erase blocks %d,%d error\n", block0, block1);
+ return -EIO;
+ }
+
+ return doc_write_erase_wait_status(docg3);
+}
+
+/**
+ * doc_erase - Erase a portion of the chip
+ * @mtd: the device
+ * @info: the erase info
+ *
+ * Erase a bunch of contiguous blocks, by pairs, as a "mtd" page of 1024 is
+ * split into 2 pages of 512 bytes on 2 contiguous blocks.
+ *
+ * Returns 0 if erase successful, -EINVAL if addressing error, -EIO if erase
+ * issue
+ */
+static int doc_erase(struct mtd_info *mtd, struct erase_info *info)
+{
+ struct docg3 *docg3 = mtd->priv;
+ uint64_t len;
+ int block0, block1, page, ret, ofs = 0;
+
+ doc_dbg("doc_erase(from=%lld, len=%lld\n", info->addr, info->len);
+
+ info->state = MTD_ERASE_PENDING;
+ calc_block_sector(info->addr + info->len, &block0, &block1, &page,
+ &ofs, docg3->reliable);
+ ret = -EINVAL;
+ if (info->addr + info->len > mtd->size || page || ofs)
+ goto reset_err;
+
+ ret = 0;
+ calc_block_sector(info->addr, &block0, &block1, &page, &ofs,
+ docg3->reliable);
+ mutex_lock(&docg3->cascade->lock);
+ doc_set_device_id(docg3, docg3->device_id);
+ doc_set_reliable_mode(docg3);
+ for (len = info->len; !ret && len > 0; len -= mtd->erasesize) {
+ info->state = MTD_ERASING;
+ ret = doc_erase_block(docg3, block0, block1);
+ block0 += 2;
+ block1 += 2;
+ }
+ mutex_unlock(&docg3->cascade->lock);
+
+ if (ret)
+ goto reset_err;
+
+ info->state = MTD_ERASE_DONE;
+ return 0;
+
+reset_err:
+ info->state = MTD_ERASE_FAILED;
+ return ret;
+}
+
+/**
+ * doc_write_page - Write a single page to the chip
+ * @docg3: the device
+ * @to: the offset from first block and first page, in bytes, aligned on page
+ * size
+ * @buf: buffer to get bytes from
+ * @oob: buffer to get out of band bytes from (can be NULL if no OOB should be
+ * written)
+ * @autoecc: if 0, all 16 bytes from OOB are taken, regardless of HW Hamming or
+ * BCH computations. If 1, only bytes 0-7 and byte 15 are taken,
+ * remaining ones are filled with hardware Hamming and BCH
+ * computations. Its value is not meaningfull is oob == NULL.
+ *
+ * Write one full page (ie. 1 page split on two planes), of 512 bytes, with the
+ * OOB data. The OOB ECC is automatically computed by the hardware Hamming and
+ * BCH generator if autoecc is not null.
+ *
+ * Returns 0 if write successful, -EIO if write error, -EAGAIN if timeout
+ */
+static int doc_write_page(struct docg3 *docg3, loff_t to, const u_char *buf,
+ const u_char *oob, int autoecc)
+{
+ int block0, block1, page, ret, ofs = 0;
+ u8 hwecc[DOC_ECC_BCH_SIZE], hamming;
+
+ doc_dbg("doc_write_page(to=%lld)\n", to);
+ calc_block_sector(to, &block0, &block1, &page, &ofs, docg3->reliable);
+
+ doc_set_device_id(docg3, docg3->device_id);
+ ret = doc_reset_seq(docg3);
+ if (ret)
+ goto err;
+
+ /* Program the flash address block and page */
+ ret = doc_write_seek(docg3, block0, block1, page, ofs);
+ if (ret)
+ goto err;
+
+ doc_write_page_ecc_init(docg3, DOC_ECC_BCH_TOTAL_BYTES);
+ doc_delay(docg3, 2);
+ doc_write_page_putbytes(docg3, DOC_LAYOUT_PAGE_SIZE, buf);
+
+ if (oob && autoecc) {
+ doc_write_page_putbytes(docg3, DOC_LAYOUT_OOB_PAGEINFO_SZ, oob);
+ doc_delay(docg3, 2);
+ oob += DOC_LAYOUT_OOB_UNUSED_OFS;
+
+ hamming = doc_register_readb(docg3, DOC_HAMMINGPARITY);
+ doc_delay(docg3, 2);
+ doc_write_page_putbytes(docg3, DOC_LAYOUT_OOB_HAMMING_SZ,
+ &hamming);
+ doc_delay(docg3, 2);
+
+ doc_get_bch_hw_ecc(docg3, hwecc);
+ doc_write_page_putbytes(docg3, DOC_LAYOUT_OOB_BCH_SZ, hwecc);
+ doc_delay(docg3, 2);
+
+ doc_write_page_putbytes(docg3, DOC_LAYOUT_OOB_UNUSED_SZ, oob);
+ }
+ if (oob && !autoecc)
+ doc_write_page_putbytes(docg3, DOC_LAYOUT_OOB_SIZE, oob);
+
+ doc_delay(docg3, 2);
+ doc_page_finish(docg3);
+ doc_delay(docg3, 2);
+ doc_flash_command(docg3, DOC_CMD_PROG_CYCLE2);
+ doc_delay(docg3, 2);
+
+ /*
+ * The wait status will perform another doc_page_finish() call, but that
+ * seems to please the docg3, so leave it.
+ */
+ ret = doc_write_erase_wait_status(docg3);
+ return ret;
+err:
+ doc_read_page_finish(docg3);
+ return ret;
+}
+
+/**
+ * doc_guess_autoecc - Guess autoecc mode from mbd_oob_ops
+ * @ops: the oob operations
+ *
+ * Returns 0 or 1 if success, -EINVAL if invalid oob mode
+ */
+static int doc_guess_autoecc(struct mtd_oob_ops *ops)
+{
+ int autoecc;
+
+ switch (ops->mode) {
+ case MTD_OPS_PLACE_OOB:
+ case MTD_OPS_AUTO_OOB:
+ autoecc = 1;
+ break;
+ case MTD_OPS_RAW:
+ autoecc = 0;
+ break;
+ default:
+ autoecc = -EINVAL;
+ }
+ return autoecc;
+}
+
+/**
+ * doc_fill_autooob - Fill a 16 bytes OOB from 8 non-ECC bytes
+ * @dst: the target 16 bytes OOB buffer
+ * @oobsrc: the source 8 bytes non-ECC OOB buffer
+ *
+ */
+static void doc_fill_autooob(u8 *dst, u8 *oobsrc)
+{
+ memcpy(dst, oobsrc, DOC_LAYOUT_OOB_PAGEINFO_SZ);
+ dst[DOC_LAYOUT_OOB_UNUSED_OFS] = oobsrc[DOC_LAYOUT_OOB_PAGEINFO_SZ];
+}
+
+/**
+ * doc_backup_oob - Backup OOB into docg3 structure
+ * @docg3: the device
+ * @to: the page offset in the chip
+ * @ops: the OOB size and buffer
+ *
+ * As the docg3 should write a page with its OOB in one pass, and some userland
+ * applications do write_oob() to setup the OOB and then write(), store the OOB
+ * into a temporary storage. This is very dangerous, as 2 concurrent
+ * applications could store an OOB, and then write their pages (which will
+ * result into one having its OOB corrupted).
+ *
+ * The only reliable way would be for userland to call doc_write_oob() with both
+ * the page data _and_ the OOB area.
+ *
+ * Returns 0 if success, -EINVAL if ops content invalid
+ */
+static int doc_backup_oob(struct docg3 *docg3, loff_t to,
+ struct mtd_oob_ops *ops)
+{
+ int ooblen = ops->ooblen, autoecc;
+
+ if (ooblen != DOC_LAYOUT_OOB_SIZE)
+ return -EINVAL;
+ autoecc = doc_guess_autoecc(ops);
+ if (autoecc < 0)
+ return autoecc;
+
+ docg3->oob_write_ofs = to;
+ docg3->oob_autoecc = autoecc;
+ if (ops->mode == MTD_OPS_AUTO_OOB) {
+ doc_fill_autooob(docg3->oob_write_buf, ops->oobbuf);
+ ops->oobretlen = 8;
+ } else {
+ memcpy(docg3->oob_write_buf, ops->oobbuf, DOC_LAYOUT_OOB_SIZE);
+ ops->oobretlen = DOC_LAYOUT_OOB_SIZE;
+ }
+ return 0;
+}
+
+/**
+ * doc_write_oob - Write out of band bytes to flash
+ * @mtd: the device
+ * @ofs: the offset from first block and first page, in bytes, aligned on page
+ * size
+ * @ops: the mtd oob structure
+ *
+ * Either write OOB data into a temporary buffer, for the subsequent write
+ * page. The provided OOB should be 16 bytes long. If a data buffer is provided
+ * as well, issue the page write.
+ * Or provide data without OOB, and then a all zeroed OOB will be used (ECC will
+ * still be filled in if asked for).
+ *
+ * Returns 0 is successful, EINVAL if length is not 14 bytes
+ */
+static int doc_write_oob(struct mtd_info *mtd, loff_t ofs,
+ struct mtd_oob_ops *ops)
+{
+ struct docg3 *docg3 = mtd->priv;
+ int ret, autoecc, oobdelta;
+ u8 *oobbuf = ops->oobbuf;
+ u8 *buf = ops->datbuf;
+ size_t len, ooblen;
+ u8 oob[DOC_LAYOUT_OOB_SIZE];
+
+ if (buf)
+ len = ops->len;
+ else
+ len = 0;
+ if (oobbuf)
+ ooblen = ops->ooblen;
+ else
+ ooblen = 0;
+
+ if (oobbuf && ops->mode == MTD_OPS_PLACE_OOB)
+ oobbuf += ops->ooboffs;
+
+ doc_dbg("doc_write_oob(from=%lld, mode=%d, data=(%p:%zu), oob=(%p:%zu))\n",
+ ofs, ops->mode, buf, len, oobbuf, ooblen);
+ switch (ops->mode) {
+ case MTD_OPS_PLACE_OOB:
+ case MTD_OPS_RAW:
+ oobdelta = mtd->oobsize;
+ break;
+ case MTD_OPS_AUTO_OOB:
+ oobdelta = mtd->ecclayout->oobavail;
+ break;
+ default:
+ return -EINVAL;
+ }
+ if ((len % DOC_LAYOUT_PAGE_SIZE) || (ooblen % oobdelta) ||
+ (ofs % DOC_LAYOUT_PAGE_SIZE))
+ return -EINVAL;
+ if (len && ooblen &&
+ (len / DOC_LAYOUT_PAGE_SIZE) != (ooblen / oobdelta))
+ return -EINVAL;
+ if (ofs + len > mtd->size)
+ return -EINVAL;
+
+ ops->oobretlen = 0;
+ ops->retlen = 0;
+ ret = 0;
+ if (len == 0 && ooblen == 0)
+ return -EINVAL;
+ if (len == 0 && ooblen > 0)
+ return doc_backup_oob(docg3, ofs, ops);
+
+ autoecc = doc_guess_autoecc(ops);
+ if (autoecc < 0)
+ return autoecc;
+
+ mutex_lock(&docg3->cascade->lock);
+ while (!ret && len > 0) {
+ memset(oob, 0, sizeof(oob));
+ if (ofs == docg3->oob_write_ofs)
+ memcpy(oob, docg3->oob_write_buf, DOC_LAYOUT_OOB_SIZE);
+ else if (ooblen > 0 && ops->mode == MTD_OPS_AUTO_OOB)
+ doc_fill_autooob(oob, oobbuf);
+ else if (ooblen > 0)
+ memcpy(oob, oobbuf, DOC_LAYOUT_OOB_SIZE);
+ ret = doc_write_page(docg3, ofs, buf, oob, autoecc);
+
+ ofs += DOC_LAYOUT_PAGE_SIZE;
+ len -= DOC_LAYOUT_PAGE_SIZE;
+ buf += DOC_LAYOUT_PAGE_SIZE;
+ if (ooblen) {
+ oobbuf += oobdelta;
+ ooblen -= oobdelta;
+ ops->oobretlen += oobdelta;
+ }
+ ops->retlen += DOC_LAYOUT_PAGE_SIZE;
+ }
+
+ doc_set_device_id(docg3, 0);
+ mutex_unlock(&docg3->cascade->lock);
+ return ret;
+}
+
+/**
+ * doc_write - Write a buffer to the chip
+ * @mtd: the device
+ * @to: the offset from first block and first page, in bytes, aligned on page
+ * size
+ * @len: the number of bytes to write (must be a full page size, ie. 512)
+ * @retlen: the number of bytes actually written (0 or 512)
+ * @buf: the buffer to get bytes from
+ *
+ * Writes data to the chip.
+ *
+ * Returns 0 if write successful, -EIO if write error
+ */
+static int doc_write(struct mtd_info *mtd, loff_t to, size_t len,
+ size_t *retlen, const u_char *buf)
+{
+ struct docg3 *docg3 = mtd->priv;
+ int ret;
+ struct mtd_oob_ops ops;
+
+ doc_dbg("doc_write(to=%lld, len=%zu)\n", to, len);
+ ops.datbuf = (char *)buf;
+ ops.len = len;
+ ops.mode = MTD_OPS_PLACE_OOB;
+ ops.oobbuf = NULL;
+ ops.ooblen = 0;
+ ops.ooboffs = 0;
+
+ ret = doc_write_oob(mtd, to, &ops);
+ *retlen = ops.retlen;
+ return ret;
+}
+
+static struct docg3 *sysfs_dev2docg3(struct device *dev,
+ struct device_attribute *attr)
+{
+ int floor;
+ struct platform_device *pdev = to_platform_device(dev);
+ struct mtd_info **docg3_floors = platform_get_drvdata(pdev);
+
+ floor = attr->attr.name[1] - '0';
+ if (floor < 0 || floor >= DOC_MAX_NBFLOORS)
+ return NULL;
+ else
+ return docg3_floors[floor]->priv;
+}
+
+static ssize_t dps0_is_key_locked(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct docg3 *docg3 = sysfs_dev2docg3(dev, attr);
+ int dps0;
+
+ mutex_lock(&docg3->cascade->lock);
+ doc_set_device_id(docg3, docg3->device_id);
+ dps0 = doc_register_readb(docg3, DOC_DPS0_STATUS);
+ doc_set_device_id(docg3, 0);
+ mutex_unlock(&docg3->cascade->lock);
+
+ return sprintf(buf, "%d\n", !(dps0 & DOC_DPS_KEY_OK));
+}
+
+static ssize_t dps1_is_key_locked(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct docg3 *docg3 = sysfs_dev2docg3(dev, attr);
+ int dps1;
+
+ mutex_lock(&docg3->cascade->lock);
+ doc_set_device_id(docg3, docg3->device_id);
+ dps1 = doc_register_readb(docg3, DOC_DPS1_STATUS);
+ doc_set_device_id(docg3, 0);
+ mutex_unlock(&docg3->cascade->lock);
+
+ return sprintf(buf, "%d\n", !(dps1 & DOC_DPS_KEY_OK));
+}
+
+static ssize_t dps0_insert_key(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct docg3 *docg3 = sysfs_dev2docg3(dev, attr);
+ int i;
+
+ if (count != DOC_LAYOUT_DPS_KEY_LENGTH)
+ return -EINVAL;
+
+ mutex_lock(&docg3->cascade->lock);
+ doc_set_device_id(docg3, docg3->device_id);
+ for (i = 0; i < DOC_LAYOUT_DPS_KEY_LENGTH; i++)
+ doc_writeb(docg3, buf[i], DOC_DPS0_KEY);
+ doc_set_device_id(docg3, 0);
+ mutex_unlock(&docg3->cascade->lock);
+ return count;
+}
+
+static ssize_t dps1_insert_key(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct docg3 *docg3 = sysfs_dev2docg3(dev, attr);
+ int i;
+
+ if (count != DOC_LAYOUT_DPS_KEY_LENGTH)
+ return -EINVAL;
+
+ mutex_lock(&docg3->cascade->lock);
+ doc_set_device_id(docg3, docg3->device_id);
+ for (i = 0; i < DOC_LAYOUT_DPS_KEY_LENGTH; i++)
+ doc_writeb(docg3, buf[i], DOC_DPS1_KEY);
+ doc_set_device_id(docg3, 0);
+ mutex_unlock(&docg3->cascade->lock);
+ return count;
+}
+
+#define FLOOR_SYSFS(id) { \
+ __ATTR(f##id##_dps0_is_keylocked, S_IRUGO, dps0_is_key_locked, NULL), \
+ __ATTR(f##id##_dps1_is_keylocked, S_IRUGO, dps1_is_key_locked, NULL), \
+ __ATTR(f##id##_dps0_protection_key, S_IWUSR|S_IWGRP, NULL, dps0_insert_key), \
+ __ATTR(f##id##_dps1_protection_key, S_IWUSR|S_IWGRP, NULL, dps1_insert_key), \
+}
+
+static struct device_attribute doc_sys_attrs[DOC_MAX_NBFLOORS][4] = {
+ FLOOR_SYSFS(0), FLOOR_SYSFS(1), FLOOR_SYSFS(2), FLOOR_SYSFS(3)
+};
+
+static int doc_register_sysfs(struct platform_device *pdev,
+ struct docg3_cascade *cascade)
+{
+ int ret = 0, floor, i = 0;
+ struct device *dev = &pdev->dev;
+
+ for (floor = 0; !ret && floor < DOC_MAX_NBFLOORS &&
+ cascade->floors[floor]; floor++)
+ for (i = 0; !ret && i < 4; i++)
+ ret = device_create_file(dev, &doc_sys_attrs[floor][i]);
+ if (!ret)
+ return 0;
+ do {
+ while (--i >= 0)
+ device_remove_file(dev, &doc_sys_attrs[floor][i]);
+ i = 4;
+ } while (--floor >= 0);
+ return ret;
+}
+
+static void doc_unregister_sysfs(struct platform_device *pdev,
+ struct docg3_cascade *cascade)
+{
+ struct device *dev = &pdev->dev;
+ int floor, i;
+
+ for (floor = 0; floor < DOC_MAX_NBFLOORS && cascade->floors[floor];
+ floor++)
+ for (i = 0; i < 4; i++)
+ device_remove_file(dev, &doc_sys_attrs[floor][i]);
+}
+
+/*
+ * Debug sysfs entries
+ */
+static int dbg_flashctrl_show(struct seq_file *s, void *p)
+{
+ struct docg3 *docg3 = (struct docg3 *)s->private;
+
+ u8 fctrl;
+
+ mutex_lock(&docg3->cascade->lock);
+ fctrl = doc_register_readb(docg3, DOC_FLASHCONTROL);
+ mutex_unlock(&docg3->cascade->lock);
+
+ seq_printf(s, "FlashControl : 0x%02x (%s,CE# %s,%s,%s,flash %s)\n",
+ fctrl,
+ fctrl & DOC_CTRL_VIOLATION ? "protocol violation" : "-",
+ fctrl & DOC_CTRL_CE ? "active" : "inactive",
+ fctrl & DOC_CTRL_PROTECTION_ERROR ? "protection error" : "-",
+ fctrl & DOC_CTRL_SEQUENCE_ERROR ? "sequence error" : "-",
+ fctrl & DOC_CTRL_FLASHREADY ? "ready" : "not ready");
+
+ return 0;
+}
+DEBUGFS_RO_ATTR(flashcontrol, dbg_flashctrl_show);
+
+static int dbg_asicmode_show(struct seq_file *s, void *p)
+{
+ struct docg3 *docg3 = (struct docg3 *)s->private;
+
+ int pctrl, mode;
+
+ mutex_lock(&docg3->cascade->lock);
+ pctrl = doc_register_readb(docg3, DOC_ASICMODE);
+ mode = pctrl & 0x03;
+ mutex_unlock(&docg3->cascade->lock);
+
+ seq_printf(s,
+ "%04x : RAM_WE=%d,RSTIN_RESET=%d,BDETCT_RESET=%d,WRITE_ENABLE=%d,POWERDOWN=%d,MODE=%d%d (",
+ pctrl,
+ pctrl & DOC_ASICMODE_RAM_WE ? 1 : 0,
+ pctrl & DOC_ASICMODE_RSTIN_RESET ? 1 : 0,
+ pctrl & DOC_ASICMODE_BDETCT_RESET ? 1 : 0,
+ pctrl & DOC_ASICMODE_MDWREN ? 1 : 0,
+ pctrl & DOC_ASICMODE_POWERDOWN ? 1 : 0,
+ mode >> 1, mode & 0x1);
+
+ switch (mode) {
+ case DOC_ASICMODE_RESET:
+ seq_puts(s, "reset");
+ break;
+ case DOC_ASICMODE_NORMAL:
+ seq_puts(s, "normal");
+ break;
+ case DOC_ASICMODE_POWERDOWN:
+ seq_puts(s, "powerdown");
+ break;
+ }
+ seq_puts(s, ")\n");
+ return 0;
+}
+DEBUGFS_RO_ATTR(asic_mode, dbg_asicmode_show);
+
+static int dbg_device_id_show(struct seq_file *s, void *p)
+{
+ struct docg3 *docg3 = (struct docg3 *)s->private;
+ int id;
+
+ mutex_lock(&docg3->cascade->lock);
+ id = doc_register_readb(docg3, DOC_DEVICESELECT);
+ mutex_unlock(&docg3->cascade->lock);
+
+ seq_printf(s, "DeviceId = %d\n", id);
+ return 0;
+}
+DEBUGFS_RO_ATTR(device_id, dbg_device_id_show);
+
+static int dbg_protection_show(struct seq_file *s, void *p)
+{
+ struct docg3 *docg3 = (struct docg3 *)s->private;
+ int protect, dps0, dps0_low, dps0_high, dps1, dps1_low, dps1_high;
+
+ mutex_lock(&docg3->cascade->lock);
+ protect = doc_register_readb(docg3, DOC_PROTECTION);
+ dps0 = doc_register_readb(docg3, DOC_DPS0_STATUS);
+ dps0_low = doc_register_readw(docg3, DOC_DPS0_ADDRLOW);
+ dps0_high = doc_register_readw(docg3, DOC_DPS0_ADDRHIGH);
+ dps1 = doc_register_readb(docg3, DOC_DPS1_STATUS);
+ dps1_low = doc_register_readw(docg3, DOC_DPS1_ADDRLOW);
+ dps1_high = doc_register_readw(docg3, DOC_DPS1_ADDRHIGH);
+ mutex_unlock(&docg3->cascade->lock);
+
+ seq_printf(s, "Protection = 0x%02x (", protect);
+ if (protect & DOC_PROTECT_FOUNDRY_OTP_LOCK)
+ seq_puts(s, "FOUNDRY_OTP_LOCK,");
+ if (protect & DOC_PROTECT_CUSTOMER_OTP_LOCK)
+ seq_puts(s, "CUSTOMER_OTP_LOCK,");
+ if (protect & DOC_PROTECT_LOCK_INPUT)
+ seq_puts(s, "LOCK_INPUT,");
+ if (protect & DOC_PROTECT_STICKY_LOCK)
+ seq_puts(s, "STICKY_LOCK,");
+ if (protect & DOC_PROTECT_PROTECTION_ENABLED)
+ seq_puts(s, "PROTECTION ON,");
+ if (protect & DOC_PROTECT_IPL_DOWNLOAD_LOCK)
+ seq_puts(s, "IPL_DOWNLOAD_LOCK,");
+ if (protect & DOC_PROTECT_PROTECTION_ERROR)
+ seq_puts(s, "PROTECT_ERR,");
+ else
+ seq_puts(s, "NO_PROTECT_ERR");
+ seq_puts(s, ")\n");
+
+ seq_printf(s, "DPS0 = 0x%02x : Protected area [0x%x - 0x%x] : OTP=%d, READ=%d, WRITE=%d, HW_LOCK=%d, KEY_OK=%d\n",
+ dps0, dps0_low, dps0_high,
+ !!(dps0 & DOC_DPS_OTP_PROTECTED),
+ !!(dps0 & DOC_DPS_READ_PROTECTED),
+ !!(dps0 & DOC_DPS_WRITE_PROTECTED),
+ !!(dps0 & DOC_DPS_HW_LOCK_ENABLED),
+ !!(dps0 & DOC_DPS_KEY_OK));
+ seq_printf(s, "DPS1 = 0x%02x : Protected area [0x%x - 0x%x] : OTP=%d, READ=%d, WRITE=%d, HW_LOCK=%d, KEY_OK=%d\n",
+ dps1, dps1_low, dps1_high,
+ !!(dps1 & DOC_DPS_OTP_PROTECTED),
+ !!(dps1 & DOC_DPS_READ_PROTECTED),
+ !!(dps1 & DOC_DPS_WRITE_PROTECTED),
+ !!(dps1 & DOC_DPS_HW_LOCK_ENABLED),
+ !!(dps1 & DOC_DPS_KEY_OK));
+ return 0;
+}
+DEBUGFS_RO_ATTR(protection, dbg_protection_show);
+
+static int __init doc_dbg_register(struct docg3 *docg3)
+{
+ struct dentry *root, *entry;
+
+ root = debugfs_create_dir("docg3", NULL);
+ if (!root)
+ return -ENOMEM;
+
+ entry = debugfs_create_file("flashcontrol", S_IRUSR, root, docg3,
+ &flashcontrol_fops);
+ if (entry)
+ entry = debugfs_create_file("asic_mode", S_IRUSR, root,
+ docg3, &asic_mode_fops);
+ if (entry)
+ entry = debugfs_create_file("device_id", S_IRUSR, root,
+ docg3, &device_id_fops);
+ if (entry)
+ entry = debugfs_create_file("protection", S_IRUSR, root,
+ docg3, &protection_fops);
+ if (entry) {
+ docg3->debugfs_root = root;
+ return 0;
+ } else {
+ debugfs_remove_recursive(root);
+ return -ENOMEM;
+ }
+}
+
+static void doc_dbg_unregister(struct docg3 *docg3)
+{
+ debugfs_remove_recursive(docg3->debugfs_root);
+}
+
+/**
+ * doc_set_driver_info - Fill the mtd_info structure and docg3 structure
+ * @chip_id: The chip ID of the supported chip
+ * @mtd: The structure to fill
+ */
+static void __init doc_set_driver_info(int chip_id, struct mtd_info *mtd)
+{
+ struct docg3 *docg3 = mtd->priv;
+ int cfg;
+
+ cfg = doc_register_readb(docg3, DOC_CONFIGURATION);
+ docg3->if_cfg = (cfg & DOC_CONF_IF_CFG ? 1 : 0);
+ docg3->reliable = reliable_mode;
+
+ switch (chip_id) {
+ case DOC_CHIPID_G3:
+ mtd->name = kasprintf(GFP_KERNEL, "docg3.%d",
+ docg3->device_id);
+ docg3->max_block = 2047;
+ break;
+ }
+ mtd->type = MTD_NANDFLASH;
+ mtd->flags = MTD_CAP_NANDFLASH;
+ mtd->size = (docg3->max_block + 1) * DOC_LAYOUT_BLOCK_SIZE;
+ if (docg3->reliable == 2)
+ mtd->size /= 2;
+ mtd->erasesize = DOC_LAYOUT_BLOCK_SIZE * DOC_LAYOUT_NBPLANES;
+ if (docg3->reliable == 2)
+ mtd->erasesize /= 2;
+ mtd->writebufsize = mtd->writesize = DOC_LAYOUT_PAGE_SIZE;
+ mtd->oobsize = DOC_LAYOUT_OOB_SIZE;
+ mtd->owner = THIS_MODULE;
+ mtd->_erase = doc_erase;
+ mtd->_read = doc_read;
+ mtd->_write = doc_write;
+ mtd->_read_oob = doc_read_oob;
+ mtd->_write_oob = doc_write_oob;
+ mtd->_block_isbad = doc_block_isbad;
+ mtd->ecclayout = &docg3_oobinfo;
+ mtd->ecc_strength = DOC_ECC_BCH_T;
+}
+
+/**
+ * doc_probe_device - Check if a device is available
+ * @base: the io space where the device is probed
+ * @floor: the floor of the probed device
+ * @dev: the device
+ * @cascade: the cascade of chips this devices will belong to
+ *
+ * Checks whether a device at the specified IO range, and floor is available.
+ *
+ * Returns a mtd_info struct if there is a device, ENODEV if none found, ENOMEM
+ * if a memory allocation failed. If floor 0 is checked, a reset of the ASIC is
+ * launched.
+ */
+static struct mtd_info * __init
+doc_probe_device(struct docg3_cascade *cascade, int floor, struct device *dev)
+{
+ int ret, bbt_nbpages;
+ u16 chip_id, chip_id_inv;
+ struct docg3 *docg3;
+ struct mtd_info *mtd;
+
+ ret = -ENOMEM;
+ docg3 = kzalloc(sizeof(struct docg3), GFP_KERNEL);
+ if (!docg3)
+ goto nomem1;
+ mtd = kzalloc(sizeof(struct mtd_info), GFP_KERNEL);
+ if (!mtd)
+ goto nomem2;
+ mtd->priv = docg3;
+ bbt_nbpages = DIV_ROUND_UP(docg3->max_block + 1,
+ 8 * DOC_LAYOUT_PAGE_SIZE);
+ docg3->bbt = kzalloc(bbt_nbpages * DOC_LAYOUT_PAGE_SIZE, GFP_KERNEL);
+ if (!docg3->bbt)
+ goto nomem3;
+
+ docg3->dev = dev;
+ docg3->device_id = floor;
+ docg3->cascade = cascade;
+ doc_set_device_id(docg3, docg3->device_id);
+ if (!floor)
+ doc_set_asic_mode(docg3, DOC_ASICMODE_RESET);
+ doc_set_asic_mode(docg3, DOC_ASICMODE_NORMAL);
+
+ chip_id = doc_register_readw(docg3, DOC_CHIPID);
+ chip_id_inv = doc_register_readw(docg3, DOC_CHIPID_INV);
+
+ ret = 0;
+ if (chip_id != (u16)(~chip_id_inv)) {
+ goto nomem3;
+ }
+
+ switch (chip_id) {
+ case DOC_CHIPID_G3:
+ doc_info("Found a G3 DiskOnChip at addr %p, floor %d\n",
+ docg3->cascade->base, floor);
+ break;
+ default:
+ doc_err("Chip id %04x is not a DiskOnChip G3 chip\n", chip_id);
+ goto nomem3;
+ }
+
+ doc_set_driver_info(chip_id, mtd);
+
+ doc_hamming_ecc_init(docg3, DOC_LAYOUT_OOB_PAGEINFO_SZ);
+ doc_reload_bbt(docg3);
+ return mtd;
+
+nomem3:
+ kfree(mtd);
+nomem2:
+ kfree(docg3);
+nomem1:
+ return ERR_PTR(ret);
+}
+
+/**
+ * doc_release_device - Release a docg3 floor
+ * @mtd: the device
+ */
+static void doc_release_device(struct mtd_info *mtd)
+{
+ struct docg3 *docg3 = mtd->priv;
+
+ mtd_device_unregister(mtd);
+ kfree(docg3->bbt);
+ kfree(docg3);
+ kfree(mtd->name);
+ kfree(mtd);
+}
+
+/**
+ * docg3_resume - Awakens docg3 floor
+ * @pdev: platfrom device
+ *
+ * Returns 0 (always successful)
+ */
+static int docg3_resume(struct platform_device *pdev)
+{
+ int i;
+ struct docg3_cascade *cascade;
+ struct mtd_info **docg3_floors, *mtd;
+ struct docg3 *docg3;
+
+ cascade = platform_get_drvdata(pdev);
+ docg3_floors = cascade->floors;
+ mtd = docg3_floors[0];
+ docg3 = mtd->priv;
+
+ doc_dbg("docg3_resume()\n");
+ for (i = 0; i < 12; i++)
+ doc_readb(docg3, DOC_IOSPACE_IPL);
+ return 0;
+}
+
+/**
+ * docg3_suspend - Put in low power mode the docg3 floor
+ * @pdev: platform device
+ * @state: power state
+ *
+ * Shuts off most of docg3 circuitery to lower power consumption.
+ *
+ * Returns 0 if suspend succeeded, -EIO if chip refused suspend
+ */
+static int docg3_suspend(struct platform_device *pdev, pm_message_t state)
+{
+ int floor, i;
+ struct docg3_cascade *cascade;
+ struct mtd_info **docg3_floors, *mtd;
+ struct docg3 *docg3;
+ u8 ctrl, pwr_down;
+
+ cascade = platform_get_drvdata(pdev);
+ docg3_floors = cascade->floors;
+ for (floor = 0; floor < DOC_MAX_NBFLOORS; floor++) {
+ mtd = docg3_floors[floor];
+ if (!mtd)
+ continue;
+ docg3 = mtd->priv;
+
+ doc_writeb(docg3, floor, DOC_DEVICESELECT);
+ ctrl = doc_register_readb(docg3, DOC_FLASHCONTROL);
+ ctrl &= ~DOC_CTRL_VIOLATION & ~DOC_CTRL_CE;
+ doc_writeb(docg3, ctrl, DOC_FLASHCONTROL);
+
+ for (i = 0; i < 10; i++) {
+ usleep_range(3000, 4000);
+ pwr_down = doc_register_readb(docg3, DOC_POWERMODE);
+ if (pwr_down & DOC_POWERDOWN_READY)
+ break;
+ }
+ if (pwr_down & DOC_POWERDOWN_READY) {
+ doc_dbg("docg3_suspend(): floor %d powerdown ok\n",
+ floor);
+ } else {
+ doc_err("docg3_suspend(): floor %d powerdown failed\n",
+ floor);
+ return -EIO;
+ }
+ }
+
+ mtd = docg3_floors[0];
+ docg3 = mtd->priv;
+ doc_set_asic_mode(docg3, DOC_ASICMODE_POWERDOWN);
+ return 0;
+}
+
+/**
+ * doc_probe - Probe the IO space for a DiskOnChip G3 chip
+ * @pdev: platform device
+ *
+ * Probes for a G3 chip at the specified IO space in the platform data
+ * ressources. The floor 0 must be available.
+ *
+ * Returns 0 on success, -ENOMEM, -ENXIO on error
+ */
+static int __init docg3_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct mtd_info *mtd;
+ struct resource *ress;
+ void __iomem *base;
+ int ret, floor;
+ struct docg3_cascade *cascade;
+
+ ret = -ENXIO;
+ ress = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!ress) {
+ dev_err(dev, "No I/O memory resource defined\n");
+ return ret;
+ }
+ base = devm_ioremap(dev, ress->start, DOC_IOSPACE_SIZE);
+
+ ret = -ENOMEM;
+ cascade = devm_kzalloc(dev, sizeof(*cascade) * DOC_MAX_NBFLOORS,
+ GFP_KERNEL);
+ if (!cascade)
+ return ret;
+ cascade->base = base;
+ mutex_init(&cascade->lock);
+ cascade->bch = init_bch(DOC_ECC_BCH_M, DOC_ECC_BCH_T,
+ DOC_ECC_BCH_PRIMPOLY);
+ if (!cascade->bch)
+ return ret;
+
+ for (floor = 0; floor < DOC_MAX_NBFLOORS; floor++) {
+ mtd = doc_probe_device(cascade, floor, dev);
+ if (IS_ERR(mtd)) {
+ ret = PTR_ERR(mtd);
+ goto err_probe;
+ }
+ if (!mtd) {
+ if (floor == 0)
+ goto notfound;
+ else
+ continue;
+ }
+ cascade->floors[floor] = mtd;
+ ret = mtd_device_parse_register(mtd, part_probes, NULL, NULL,
+ 0);
+ if (ret)
+ goto err_probe;
+ }
+
+ ret = doc_register_sysfs(pdev, cascade);
+ if (ret)
+ goto err_probe;
+
+ platform_set_drvdata(pdev, cascade);
+ doc_dbg_register(cascade->floors[0]->priv);
+ return 0;
+
+notfound:
+ ret = -ENODEV;
+ dev_info(dev, "No supported DiskOnChip found\n");
+err_probe:
+ free_bch(cascade->bch);
+ for (floor = 0; floor < DOC_MAX_NBFLOORS; floor++)
+ if (cascade->floors[floor])
+ doc_release_device(cascade->floors[floor]);
+ return ret;
+}
+
+/**
+ * docg3_release - Release the driver
+ * @pdev: the platform device
+ *
+ * Returns 0
+ */
+static int docg3_release(struct platform_device *pdev)
+{
+ struct docg3_cascade *cascade = platform_get_drvdata(pdev);
+ struct docg3 *docg3 = cascade->floors[0]->priv;
+ int floor;
+
+ doc_unregister_sysfs(pdev, cascade);
+ doc_dbg_unregister(docg3);
+ for (floor = 0; floor < DOC_MAX_NBFLOORS; floor++)
+ if (cascade->floors[floor])
+ doc_release_device(cascade->floors[floor]);
+
+ free_bch(docg3->cascade->bch);
+ return 0;
+}
+
+#ifdef CONFIG_OF
+static struct of_device_id docg3_dt_ids[] = {
+ { .compatible = "m-systems,diskonchip-g3" },
+ {}
+};
+MODULE_DEVICE_TABLE(of, docg3_dt_ids);
+#endif
+
+static struct platform_driver g3_driver = {
+ .driver = {
+ .name = "docg3",
+ .of_match_table = of_match_ptr(docg3_dt_ids),
+ },
+ .suspend = docg3_suspend,
+ .resume = docg3_resume,
+ .remove = docg3_release,
+};
+
+module_platform_driver_probe(g3_driver, docg3_probe);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Robert Jarzmik <robert.jarzmik@free.fr>");
+MODULE_DESCRIPTION("MTD driver for DiskOnChip G3");
diff --git a/kernel/drivers/mtd/devices/docg3.h b/kernel/drivers/mtd/devices/docg3.h
new file mode 100644
index 000000000..19fb93f96
--- /dev/null
+++ b/kernel/drivers/mtd/devices/docg3.h
@@ -0,0 +1,370 @@
+/*
+ * Handles the M-Systems DiskOnChip G3 chip
+ *
+ * Copyright (C) 2011 Robert Jarzmik
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#ifndef _MTD_DOCG3_H
+#define _MTD_DOCG3_H
+
+#include <linux/mtd/mtd.h>
+
+/*
+ * Flash memory areas :
+ * - 0x0000 .. 0x07ff : IPL
+ * - 0x0800 .. 0x0fff : Data area
+ * - 0x1000 .. 0x17ff : Registers
+ * - 0x1800 .. 0x1fff : Unknown
+ */
+#define DOC_IOSPACE_IPL 0x0000
+#define DOC_IOSPACE_DATA 0x0800
+#define DOC_IOSPACE_SIZE 0x2000
+
+/*
+ * DOC G3 layout and adressing scheme
+ * A page address for the block "b", plane "P" and page "p":
+ * address = [bbbb bPpp pppp]
+ */
+
+#define DOC_ADDR_PAGE_MASK 0x3f
+#define DOC_ADDR_BLOCK_SHIFT 6
+#define DOC_LAYOUT_NBPLANES 2
+#define DOC_LAYOUT_PAGES_PER_BLOCK 64
+#define DOC_LAYOUT_PAGE_SIZE 512
+#define DOC_LAYOUT_OOB_SIZE 16
+#define DOC_LAYOUT_WEAR_SIZE 8
+#define DOC_LAYOUT_PAGE_OOB_SIZE \
+ (DOC_LAYOUT_PAGE_SIZE + DOC_LAYOUT_OOB_SIZE)
+#define DOC_LAYOUT_WEAR_OFFSET (DOC_LAYOUT_PAGE_OOB_SIZE * 2)
+#define DOC_LAYOUT_BLOCK_SIZE \
+ (DOC_LAYOUT_PAGES_PER_BLOCK * DOC_LAYOUT_PAGE_SIZE)
+
+/*
+ * ECC related constants
+ */
+#define DOC_ECC_BCH_M 14
+#define DOC_ECC_BCH_T 4
+#define DOC_ECC_BCH_PRIMPOLY 0x4443
+#define DOC_ECC_BCH_SIZE 7
+#define DOC_ECC_BCH_COVERED_BYTES \
+ (DOC_LAYOUT_PAGE_SIZE + DOC_LAYOUT_OOB_PAGEINFO_SZ + \
+ DOC_LAYOUT_OOB_HAMMING_SZ)
+#define DOC_ECC_BCH_TOTAL_BYTES \
+ (DOC_ECC_BCH_COVERED_BYTES + DOC_LAYOUT_OOB_BCH_SZ)
+
+/*
+ * Blocks distribution
+ */
+#define DOC_LAYOUT_BLOCK_BBT 0
+#define DOC_LAYOUT_BLOCK_OTP 0
+#define DOC_LAYOUT_BLOCK_FIRST_DATA 6
+
+#define DOC_LAYOUT_PAGE_BBT 4
+
+/*
+ * Extra page OOB (16 bytes wide) layout
+ */
+#define DOC_LAYOUT_OOB_PAGEINFO_OFS 0
+#define DOC_LAYOUT_OOB_HAMMING_OFS 7
+#define DOC_LAYOUT_OOB_BCH_OFS 8
+#define DOC_LAYOUT_OOB_UNUSED_OFS 15
+#define DOC_LAYOUT_OOB_PAGEINFO_SZ 7
+#define DOC_LAYOUT_OOB_HAMMING_SZ 1
+#define DOC_LAYOUT_OOB_BCH_SZ 7
+#define DOC_LAYOUT_OOB_UNUSED_SZ 1
+
+
+#define DOC_CHIPID_G3 0x200
+#define DOC_ERASE_MARK 0xaa
+#define DOC_MAX_NBFLOORS 4
+/*
+ * Flash registers
+ */
+#define DOC_CHIPID 0x1000
+#define DOC_TEST 0x1004
+#define DOC_BUSLOCK 0x1006
+#define DOC_ENDIANCONTROL 0x1008
+#define DOC_DEVICESELECT 0x100a
+#define DOC_ASICMODE 0x100c
+#define DOC_CONFIGURATION 0x100e
+#define DOC_INTERRUPTCONTROL 0x1010
+#define DOC_READADDRESS 0x101a
+#define DOC_DATAEND 0x101e
+#define DOC_INTERRUPTSTATUS 0x1020
+
+#define DOC_FLASHSEQUENCE 0x1032
+#define DOC_FLASHCOMMAND 0x1034
+#define DOC_FLASHADDRESS 0x1036
+#define DOC_FLASHCONTROL 0x1038
+#define DOC_NOP 0x103e
+
+#define DOC_ECCCONF0 0x1040
+#define DOC_ECCCONF1 0x1042
+#define DOC_ECCPRESET 0x1044
+#define DOC_HAMMINGPARITY 0x1046
+#define DOC_BCH_HW_ECC(idx) (0x1048 + idx)
+
+#define DOC_PROTECTION 0x1056
+#define DOC_DPS0_KEY 0x105c
+#define DOC_DPS1_KEY 0x105e
+#define DOC_DPS0_ADDRLOW 0x1060
+#define DOC_DPS0_ADDRHIGH 0x1062
+#define DOC_DPS1_ADDRLOW 0x1064
+#define DOC_DPS1_ADDRHIGH 0x1066
+#define DOC_DPS0_STATUS 0x106c
+#define DOC_DPS1_STATUS 0x106e
+
+#define DOC_ASICMODECONFIRM 0x1072
+#define DOC_CHIPID_INV 0x1074
+#define DOC_POWERMODE 0x107c
+
+/*
+ * Flash sequences
+ * A sequence is preset before one or more commands are input to the chip.
+ */
+#define DOC_SEQ_RESET 0x00
+#define DOC_SEQ_PAGE_SIZE_532 0x03
+#define DOC_SEQ_SET_FASTMODE 0x05
+#define DOC_SEQ_SET_RELIABLEMODE 0x09
+#define DOC_SEQ_READ 0x12
+#define DOC_SEQ_SET_PLANE1 0x0e
+#define DOC_SEQ_SET_PLANE2 0x10
+#define DOC_SEQ_PAGE_SETUP 0x1d
+#define DOC_SEQ_ERASE 0x27
+#define DOC_SEQ_PLANES_STATUS 0x31
+
+/*
+ * Flash commands
+ */
+#define DOC_CMD_READ_PLANE1 0x00
+#define DOC_CMD_SET_ADDR_READ 0x05
+#define DOC_CMD_READ_ALL_PLANES 0x30
+#define DOC_CMD_READ_PLANE2 0x50
+#define DOC_CMD_READ_FLASH 0xe0
+#define DOC_CMD_PAGE_SIZE_532 0x3c
+
+#define DOC_CMD_PROG_BLOCK_ADDR 0x60
+#define DOC_CMD_PROG_CYCLE1 0x80
+#define DOC_CMD_PROG_CYCLE2 0x10
+#define DOC_CMD_PROG_CYCLE3 0x11
+#define DOC_CMD_ERASECYCLE2 0xd0
+#define DOC_CMD_READ_STATUS 0x70
+#define DOC_CMD_PLANES_STATUS 0x71
+
+#define DOC_CMD_RELIABLE_MODE 0x22
+#define DOC_CMD_FAST_MODE 0xa2
+
+#define DOC_CMD_RESET 0xff
+
+/*
+ * Flash register : DOC_FLASHCONTROL
+ */
+#define DOC_CTRL_VIOLATION 0x20
+#define DOC_CTRL_CE 0x10
+#define DOC_CTRL_UNKNOWN_BITS 0x08
+#define DOC_CTRL_PROTECTION_ERROR 0x04
+#define DOC_CTRL_SEQUENCE_ERROR 0x02
+#define DOC_CTRL_FLASHREADY 0x01
+
+/*
+ * Flash register : DOC_ASICMODE
+ */
+#define DOC_ASICMODE_RESET 0x00
+#define DOC_ASICMODE_NORMAL 0x01
+#define DOC_ASICMODE_POWERDOWN 0x02
+#define DOC_ASICMODE_MDWREN 0x04
+#define DOC_ASICMODE_BDETCT_RESET 0x08
+#define DOC_ASICMODE_RSTIN_RESET 0x10
+#define DOC_ASICMODE_RAM_WE 0x20
+
+/*
+ * Flash register : DOC_ECCCONF0
+ */
+#define DOC_ECCCONF0_WRITE_MODE 0x0000
+#define DOC_ECCCONF0_READ_MODE 0x8000
+#define DOC_ECCCONF0_AUTO_ECC_ENABLE 0x4000
+#define DOC_ECCCONF0_HAMMING_ENABLE 0x1000
+#define DOC_ECCCONF0_BCH_ENABLE 0x0800
+#define DOC_ECCCONF0_DATA_BYTES_MASK 0x07ff
+
+/*
+ * Flash register : DOC_ECCCONF1
+ */
+#define DOC_ECCCONF1_BCH_SYNDROM_ERR 0x80
+#define DOC_ECCCONF1_UNKOWN1 0x40
+#define DOC_ECCCONF1_PAGE_IS_WRITTEN 0x20
+#define DOC_ECCCONF1_UNKOWN3 0x10
+#define DOC_ECCCONF1_HAMMING_BITS_MASK 0x0f
+
+/*
+ * Flash register : DOC_PROTECTION
+ */
+#define DOC_PROTECT_FOUNDRY_OTP_LOCK 0x01
+#define DOC_PROTECT_CUSTOMER_OTP_LOCK 0x02
+#define DOC_PROTECT_LOCK_INPUT 0x04
+#define DOC_PROTECT_STICKY_LOCK 0x08
+#define DOC_PROTECT_PROTECTION_ENABLED 0x10
+#define DOC_PROTECT_IPL_DOWNLOAD_LOCK 0x20
+#define DOC_PROTECT_PROTECTION_ERROR 0x80
+
+/*
+ * Flash register : DOC_DPS0_STATUS and DOC_DPS1_STATUS
+ */
+#define DOC_DPS_OTP_PROTECTED 0x01
+#define DOC_DPS_READ_PROTECTED 0x02
+#define DOC_DPS_WRITE_PROTECTED 0x04
+#define DOC_DPS_HW_LOCK_ENABLED 0x08
+#define DOC_DPS_KEY_OK 0x80
+
+/*
+ * Flash register : DOC_CONFIGURATION
+ */
+#define DOC_CONF_IF_CFG 0x80
+#define DOC_CONF_MAX_ID_MASK 0x30
+#define DOC_CONF_VCCQ_3V 0x01
+
+/*
+ * Flash register : DOC_READADDRESS
+ */
+#define DOC_READADDR_INC 0x8000
+#define DOC_READADDR_ONE_BYTE 0x4000
+#define DOC_READADDR_ADDR_MASK 0x1fff
+
+/*
+ * Flash register : DOC_POWERMODE
+ */
+#define DOC_POWERDOWN_READY 0x80
+
+/*
+ * Status of erase and write operation
+ */
+#define DOC_PLANES_STATUS_FAIL 0x01
+#define DOC_PLANES_STATUS_PLANE0_KO 0x02
+#define DOC_PLANES_STATUS_PLANE1_KO 0x04
+
+/*
+ * DPS key management
+ *
+ * Each floor of docg3 has 2 protection areas: DPS0 and DPS1. These areas span
+ * across block boundaries, and define whether these blocks can be read or
+ * written.
+ * The definition is dynamically stored in page 0 of blocks (2,3) for DPS0, and
+ * page 0 of blocks (4,5) for DPS1.
+ */
+#define DOC_LAYOUT_DPS_KEY_LENGTH 8
+
+/**
+ * struct docg3_cascade - Cascade of 1 to 4 docg3 chips
+ * @floors: floors (ie. one physical docg3 chip is one floor)
+ * @base: IO space to access all chips in the cascade
+ * @bch: the BCH correcting control structure
+ * @lock: lock to protect docg3 IO space from concurrent accesses
+ */
+struct docg3_cascade {
+ struct mtd_info *floors[DOC_MAX_NBFLOORS];
+ void __iomem *base;
+ struct bch_control *bch;
+ struct mutex lock;
+};
+
+/**
+ * struct docg3 - DiskOnChip driver private data
+ * @dev: the device currently under control
+ * @cascade: the cascade this device belongs to
+ * @device_id: number of the cascaded DoCG3 device (0, 1, 2 or 3)
+ * @if_cfg: if true, reads are on 16bits, else reads are on 8bits
+
+ * @reliable: if 0, docg3 in normal mode, if 1 docg3 in fast mode, if 2 in
+ * reliable mode
+ * Fast mode implies more errors than normal mode.
+ * Reliable mode implies that page 2*n and 2*n+1 are clones.
+ * @bbt: bad block table cache
+ * @oob_write_ofs: offset of the MTD where this OOB should belong (ie. in next
+ * page_write)
+ * @oob_autoecc: if 1, use only bytes 0-7, 15, and fill the others with HW ECC
+ * if 0, use all the 16 bytes.
+ * @oob_write_buf: prepared OOB for next page_write
+ * @debugfs_root: debugfs root node
+ */
+struct docg3 {
+ struct device *dev;
+ struct docg3_cascade *cascade;
+ unsigned int device_id:4;
+ unsigned int if_cfg:1;
+ unsigned int reliable:2;
+ int max_block;
+ u8 *bbt;
+ loff_t oob_write_ofs;
+ int oob_autoecc;
+ u8 oob_write_buf[DOC_LAYOUT_OOB_SIZE];
+ struct dentry *debugfs_root;
+};
+
+#define doc_err(fmt, arg...) dev_err(docg3->dev, (fmt), ## arg)
+#define doc_info(fmt, arg...) dev_info(docg3->dev, (fmt), ## arg)
+#define doc_dbg(fmt, arg...) dev_dbg(docg3->dev, (fmt), ## arg)
+#define doc_vdbg(fmt, arg...) dev_vdbg(docg3->dev, (fmt), ## arg)
+
+#define DEBUGFS_RO_ATTR(name, show_fct) \
+ static int name##_open(struct inode *inode, struct file *file) \
+ { return single_open(file, show_fct, inode->i_private); } \
+ static const struct file_operations name##_fops = { \
+ .owner = THIS_MODULE, \
+ .open = name##_open, \
+ .llseek = seq_lseek, \
+ .read = seq_read, \
+ .release = single_release \
+ };
+#endif
+
+/*
+ * Trace events part
+ */
+#undef TRACE_SYSTEM
+#define TRACE_SYSTEM docg3
+
+#if !defined(_MTD_DOCG3_TRACE) || defined(TRACE_HEADER_MULTI_READ)
+#define _MTD_DOCG3_TRACE
+
+#include <linux/tracepoint.h>
+
+TRACE_EVENT(docg3_io,
+ TP_PROTO(int op, int width, u16 reg, int val),
+ TP_ARGS(op, width, reg, val),
+ TP_STRUCT__entry(
+ __field(int, op)
+ __field(unsigned char, width)
+ __field(u16, reg)
+ __field(int, val)),
+ TP_fast_assign(
+ __entry->op = op;
+ __entry->width = width;
+ __entry->reg = reg;
+ __entry->val = val;),
+ TP_printk("docg3: %s%02d reg=%04x, val=%04x",
+ __entry->op ? "write" : "read", __entry->width,
+ __entry->reg, __entry->val)
+ );
+#endif
+
+/* This part must be outside protection */
+#undef TRACE_INCLUDE_PATH
+#undef TRACE_INCLUDE_FILE
+#define TRACE_INCLUDE_PATH .
+#define TRACE_INCLUDE_FILE docg3
+#include <trace/define_trace.h>
diff --git a/kernel/drivers/mtd/devices/lart.c b/kernel/drivers/mtd/devices/lart.c
new file mode 100644
index 000000000..82bd00af5
--- /dev/null
+++ b/kernel/drivers/mtd/devices/lart.c
@@ -0,0 +1,685 @@
+
+/*
+ * MTD driver for the 28F160F3 Flash Memory (non-CFI) on LART.
+ *
+ * Author: Abraham vd Merwe <abraham@2d3d.co.za>
+ *
+ * Copyright (c) 2001, 2d3D, Inc.
+ *
+ * This code is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * References:
+ *
+ * [1] 3 Volt Fast Boot Block Flash Memory" Intel Datasheet
+ * - Order Number: 290644-005
+ * - January 2000
+ *
+ * [2] MTD internal API documentation
+ * - http://www.linux-mtd.infradead.org/
+ *
+ * Limitations:
+ *
+ * Even though this driver is written for 3 Volt Fast Boot
+ * Block Flash Memory, it is rather specific to LART. With
+ * Minor modifications, notably the without data/address line
+ * mangling and different bus settings, etc. it should be
+ * trivial to adapt to other platforms.
+ *
+ * If somebody would sponsor me a different board, I'll
+ * adapt the driver (:
+ */
+
+/* debugging */
+//#define LART_DEBUG
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/string.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+
+#ifndef CONFIG_SA1100_LART
+#error This is for LART architecture only
+#endif
+
+static char module_name[] = "lart";
+
+/*
+ * These values is specific to 28Fxxxx3 flash memory.
+ * See section 2.3.1 in "3 Volt Fast Boot Block Flash Memory" Intel Datasheet
+ */
+#define FLASH_BLOCKSIZE_PARAM (4096 * BUSWIDTH)
+#define FLASH_NUMBLOCKS_16m_PARAM 8
+#define FLASH_NUMBLOCKS_8m_PARAM 8
+
+/*
+ * These values is specific to 28Fxxxx3 flash memory.
+ * See section 2.3.2 in "3 Volt Fast Boot Block Flash Memory" Intel Datasheet
+ */
+#define FLASH_BLOCKSIZE_MAIN (32768 * BUSWIDTH)
+#define FLASH_NUMBLOCKS_16m_MAIN 31
+#define FLASH_NUMBLOCKS_8m_MAIN 15
+
+/*
+ * These values are specific to LART
+ */
+
+/* general */
+#define BUSWIDTH 4 /* don't change this - a lot of the code _will_ break if you change this */
+#define FLASH_OFFSET 0xe8000000 /* see linux/arch/arm/mach-sa1100/lart.c */
+
+/* blob */
+#define NUM_BLOB_BLOCKS FLASH_NUMBLOCKS_16m_PARAM
+#define BLOB_START 0x00000000
+#define BLOB_LEN (NUM_BLOB_BLOCKS * FLASH_BLOCKSIZE_PARAM)
+
+/* kernel */
+#define NUM_KERNEL_BLOCKS 7
+#define KERNEL_START (BLOB_START + BLOB_LEN)
+#define KERNEL_LEN (NUM_KERNEL_BLOCKS * FLASH_BLOCKSIZE_MAIN)
+
+/* initial ramdisk */
+#define NUM_INITRD_BLOCKS 24
+#define INITRD_START (KERNEL_START + KERNEL_LEN)
+#define INITRD_LEN (NUM_INITRD_BLOCKS * FLASH_BLOCKSIZE_MAIN)
+
+/*
+ * See section 4.0 in "3 Volt Fast Boot Block Flash Memory" Intel Datasheet
+ */
+#define READ_ARRAY 0x00FF00FF /* Read Array/Reset */
+#define READ_ID_CODES 0x00900090 /* Read Identifier Codes */
+#define ERASE_SETUP 0x00200020 /* Block Erase */
+#define ERASE_CONFIRM 0x00D000D0 /* Block Erase and Program Resume */
+#define PGM_SETUP 0x00400040 /* Program */
+#define STATUS_READ 0x00700070 /* Read Status Register */
+#define STATUS_CLEAR 0x00500050 /* Clear Status Register */
+#define STATUS_BUSY 0x00800080 /* Write State Machine Status (WSMS) */
+#define STATUS_ERASE_ERR 0x00200020 /* Erase Status (ES) */
+#define STATUS_PGM_ERR 0x00100010 /* Program Status (PS) */
+
+/*
+ * See section 4.2 in "3 Volt Fast Boot Block Flash Memory" Intel Datasheet
+ */
+#define FLASH_MANUFACTURER 0x00890089
+#define FLASH_DEVICE_8mbit_TOP 0x88f188f1
+#define FLASH_DEVICE_8mbit_BOTTOM 0x88f288f2
+#define FLASH_DEVICE_16mbit_TOP 0x88f388f3
+#define FLASH_DEVICE_16mbit_BOTTOM 0x88f488f4
+
+/***************************************************************************************************/
+
+/*
+ * The data line mapping on LART is as follows:
+ *
+ * U2 CPU | U3 CPU
+ * -------------------
+ * 0 20 | 0 12
+ * 1 22 | 1 14
+ * 2 19 | 2 11
+ * 3 17 | 3 9
+ * 4 24 | 4 0
+ * 5 26 | 5 2
+ * 6 31 | 6 7
+ * 7 29 | 7 5
+ * 8 21 | 8 13
+ * 9 23 | 9 15
+ * 10 18 | 10 10
+ * 11 16 | 11 8
+ * 12 25 | 12 1
+ * 13 27 | 13 3
+ * 14 30 | 14 6
+ * 15 28 | 15 4
+ */
+
+/* Mangle data (x) */
+#define DATA_TO_FLASH(x) \
+ ( \
+ (((x) & 0x08009000) >> 11) + \
+ (((x) & 0x00002000) >> 10) + \
+ (((x) & 0x04004000) >> 8) + \
+ (((x) & 0x00000010) >> 4) + \
+ (((x) & 0x91000820) >> 3) + \
+ (((x) & 0x22080080) >> 2) + \
+ ((x) & 0x40000400) + \
+ (((x) & 0x00040040) << 1) + \
+ (((x) & 0x00110000) << 4) + \
+ (((x) & 0x00220100) << 5) + \
+ (((x) & 0x00800208) << 6) + \
+ (((x) & 0x00400004) << 9) + \
+ (((x) & 0x00000001) << 12) + \
+ (((x) & 0x00000002) << 13) \
+ )
+
+/* Unmangle data (x) */
+#define FLASH_TO_DATA(x) \
+ ( \
+ (((x) & 0x00010012) << 11) + \
+ (((x) & 0x00000008) << 10) + \
+ (((x) & 0x00040040) << 8) + \
+ (((x) & 0x00000001) << 4) + \
+ (((x) & 0x12200104) << 3) + \
+ (((x) & 0x08820020) << 2) + \
+ ((x) & 0x40000400) + \
+ (((x) & 0x00080080) >> 1) + \
+ (((x) & 0x01100000) >> 4) + \
+ (((x) & 0x04402000) >> 5) + \
+ (((x) & 0x20008200) >> 6) + \
+ (((x) & 0x80000800) >> 9) + \
+ (((x) & 0x00001000) >> 12) + \
+ (((x) & 0x00004000) >> 13) \
+ )
+
+/*
+ * The address line mapping on LART is as follows:
+ *
+ * U3 CPU | U2 CPU
+ * -------------------
+ * 0 2 | 0 2
+ * 1 3 | 1 3
+ * 2 9 | 2 9
+ * 3 13 | 3 8
+ * 4 8 | 4 7
+ * 5 12 | 5 6
+ * 6 11 | 6 5
+ * 7 10 | 7 4
+ * 8 4 | 8 10
+ * 9 5 | 9 11
+ * 10 6 | 10 12
+ * 11 7 | 11 13
+ *
+ * BOOT BLOCK BOUNDARY
+ *
+ * 12 15 | 12 15
+ * 13 14 | 13 14
+ * 14 16 | 14 16
+ *
+ * MAIN BLOCK BOUNDARY
+ *
+ * 15 17 | 15 18
+ * 16 18 | 16 17
+ * 17 20 | 17 20
+ * 18 19 | 18 19
+ * 19 21 | 19 21
+ *
+ * As we can see from above, the addresses aren't mangled across
+ * block boundaries, so we don't need to worry about address
+ * translations except for sending/reading commands during
+ * initialization
+ */
+
+/* Mangle address (x) on chip U2 */
+#define ADDR_TO_FLASH_U2(x) \
+ ( \
+ (((x) & 0x00000f00) >> 4) + \
+ (((x) & 0x00042000) << 1) + \
+ (((x) & 0x0009c003) << 2) + \
+ (((x) & 0x00021080) << 3) + \
+ (((x) & 0x00000010) << 4) + \
+ (((x) & 0x00000040) << 5) + \
+ (((x) & 0x00000024) << 7) + \
+ (((x) & 0x00000008) << 10) \
+ )
+
+/* Unmangle address (x) on chip U2 */
+#define FLASH_U2_TO_ADDR(x) \
+ ( \
+ (((x) << 4) & 0x00000f00) + \
+ (((x) >> 1) & 0x00042000) + \
+ (((x) >> 2) & 0x0009c003) + \
+ (((x) >> 3) & 0x00021080) + \
+ (((x) >> 4) & 0x00000010) + \
+ (((x) >> 5) & 0x00000040) + \
+ (((x) >> 7) & 0x00000024) + \
+ (((x) >> 10) & 0x00000008) \
+ )
+
+/* Mangle address (x) on chip U3 */
+#define ADDR_TO_FLASH_U3(x) \
+ ( \
+ (((x) & 0x00000080) >> 3) + \
+ (((x) & 0x00000040) >> 1) + \
+ (((x) & 0x00052020) << 1) + \
+ (((x) & 0x00084f03) << 2) + \
+ (((x) & 0x00029010) << 3) + \
+ (((x) & 0x00000008) << 5) + \
+ (((x) & 0x00000004) << 7) \
+ )
+
+/* Unmangle address (x) on chip U3 */
+#define FLASH_U3_TO_ADDR(x) \
+ ( \
+ (((x) << 3) & 0x00000080) + \
+ (((x) << 1) & 0x00000040) + \
+ (((x) >> 1) & 0x00052020) + \
+ (((x) >> 2) & 0x00084f03) + \
+ (((x) >> 3) & 0x00029010) + \
+ (((x) >> 5) & 0x00000008) + \
+ (((x) >> 7) & 0x00000004) \
+ )
+
+/***************************************************************************************************/
+
+static __u8 read8 (__u32 offset)
+{
+ volatile __u8 *data = (__u8 *) (FLASH_OFFSET + offset);
+#ifdef LART_DEBUG
+ printk (KERN_DEBUG "%s(): 0x%.8x -> 0x%.2x\n", __func__, offset, *data);
+#endif
+ return (*data);
+}
+
+static __u32 read32 (__u32 offset)
+{
+ volatile __u32 *data = (__u32 *) (FLASH_OFFSET + offset);
+#ifdef LART_DEBUG
+ printk (KERN_DEBUG "%s(): 0x%.8x -> 0x%.8x\n", __func__, offset, *data);
+#endif
+ return (*data);
+}
+
+static void write32 (__u32 x,__u32 offset)
+{
+ volatile __u32 *data = (__u32 *) (FLASH_OFFSET + offset);
+ *data = x;
+#ifdef LART_DEBUG
+ printk (KERN_DEBUG "%s(): 0x%.8x <- 0x%.8x\n", __func__, offset, *data);
+#endif
+}
+
+/***************************************************************************************************/
+
+/*
+ * Probe for 16mbit flash memory on a LART board without doing
+ * too much damage. Since we need to write 1 dword to memory,
+ * we're f**cked if this happens to be DRAM since we can't
+ * restore the memory (otherwise we might exit Read Array mode).
+ *
+ * Returns 1 if we found 16mbit flash memory on LART, 0 otherwise.
+ */
+static int flash_probe (void)
+{
+ __u32 manufacturer,devtype;
+
+ /* setup "Read Identifier Codes" mode */
+ write32 (DATA_TO_FLASH (READ_ID_CODES),0x00000000);
+
+ /* probe U2. U2/U3 returns the same data since the first 3
+ * address lines is mangled in the same way */
+ manufacturer = FLASH_TO_DATA (read32 (ADDR_TO_FLASH_U2 (0x00000000)));
+ devtype = FLASH_TO_DATA (read32 (ADDR_TO_FLASH_U2 (0x00000001)));
+
+ /* put the flash back into command mode */
+ write32 (DATA_TO_FLASH (READ_ARRAY),0x00000000);
+
+ return (manufacturer == FLASH_MANUFACTURER && (devtype == FLASH_DEVICE_16mbit_TOP || devtype == FLASH_DEVICE_16mbit_BOTTOM));
+}
+
+/*
+ * Erase one block of flash memory at offset ``offset'' which is any
+ * address within the block which should be erased.
+ *
+ * Returns 1 if successful, 0 otherwise.
+ */
+static inline int erase_block (__u32 offset)
+{
+ __u32 status;
+
+#ifdef LART_DEBUG
+ printk (KERN_DEBUG "%s(): 0x%.8x\n", __func__, offset);
+#endif
+
+ /* erase and confirm */
+ write32 (DATA_TO_FLASH (ERASE_SETUP),offset);
+ write32 (DATA_TO_FLASH (ERASE_CONFIRM),offset);
+
+ /* wait for block erase to finish */
+ do
+ {
+ write32 (DATA_TO_FLASH (STATUS_READ),offset);
+ status = FLASH_TO_DATA (read32 (offset));
+ }
+ while ((~status & STATUS_BUSY) != 0);
+
+ /* put the flash back into command mode */
+ write32 (DATA_TO_FLASH (READ_ARRAY),offset);
+
+ /* was the erase successful? */
+ if ((status & STATUS_ERASE_ERR))
+ {
+ printk (KERN_WARNING "%s: erase error at address 0x%.8x.\n",module_name,offset);
+ return (0);
+ }
+
+ return (1);
+}
+
+static int flash_erase (struct mtd_info *mtd,struct erase_info *instr)
+{
+ __u32 addr,len;
+ int i,first;
+
+#ifdef LART_DEBUG
+ printk (KERN_DEBUG "%s(addr = 0x%.8x, len = %d)\n", __func__, instr->addr, instr->len);
+#endif
+
+ /*
+ * check that both start and end of the requested erase are
+ * aligned with the erasesize at the appropriate addresses.
+ *
+ * skip all erase regions which are ended before the start of
+ * the requested erase. Actually, to save on the calculations,
+ * we skip to the first erase region which starts after the
+ * start of the requested erase, and then go back one.
+ */
+ for (i = 0; i < mtd->numeraseregions && instr->addr >= mtd->eraseregions[i].offset; i++) ;
+ i--;
+
+ /*
+ * ok, now i is pointing at the erase region in which this
+ * erase request starts. Check the start of the requested
+ * erase range is aligned with the erase size which is in
+ * effect here.
+ */
+ if (i < 0 || (instr->addr & (mtd->eraseregions[i].erasesize - 1)))
+ return -EINVAL;
+
+ /* Remember the erase region we start on */
+ first = i;
+
+ /*
+ * next, check that the end of the requested erase is aligned
+ * with the erase region at that address.
+ *
+ * as before, drop back one to point at the region in which
+ * the address actually falls
+ */
+ for (; i < mtd->numeraseregions && instr->addr + instr->len >= mtd->eraseregions[i].offset; i++) ;
+ i--;
+
+ /* is the end aligned on a block boundary? */
+ if (i < 0 || ((instr->addr + instr->len) & (mtd->eraseregions[i].erasesize - 1)))
+ return -EINVAL;
+
+ addr = instr->addr;
+ len = instr->len;
+
+ i = first;
+
+ /* now erase those blocks */
+ while (len)
+ {
+ if (!erase_block (addr))
+ {
+ instr->state = MTD_ERASE_FAILED;
+ return (-EIO);
+ }
+
+ addr += mtd->eraseregions[i].erasesize;
+ len -= mtd->eraseregions[i].erasesize;
+
+ if (addr == mtd->eraseregions[i].offset + (mtd->eraseregions[i].erasesize * mtd->eraseregions[i].numblocks)) i++;
+ }
+
+ instr->state = MTD_ERASE_DONE;
+ mtd_erase_callback(instr);
+
+ return (0);
+}
+
+static int flash_read (struct mtd_info *mtd,loff_t from,size_t len,size_t *retlen,u_char *buf)
+{
+#ifdef LART_DEBUG
+ printk (KERN_DEBUG "%s(from = 0x%.8x, len = %d)\n", __func__, (__u32)from, len);
+#endif
+
+ /* we always read len bytes */
+ *retlen = len;
+
+ /* first, we read bytes until we reach a dword boundary */
+ if (from & (BUSWIDTH - 1))
+ {
+ int gap = BUSWIDTH - (from & (BUSWIDTH - 1));
+
+ while (len && gap--) *buf++ = read8 (from++), len--;
+ }
+
+ /* now we read dwords until we reach a non-dword boundary */
+ while (len >= BUSWIDTH)
+ {
+ *((__u32 *) buf) = read32 (from);
+
+ buf += BUSWIDTH;
+ from += BUSWIDTH;
+ len -= BUSWIDTH;
+ }
+
+ /* top up the last unaligned bytes */
+ if (len & (BUSWIDTH - 1))
+ while (len--) *buf++ = read8 (from++);
+
+ return (0);
+}
+
+/*
+ * Write one dword ``x'' to flash memory at offset ``offset''. ``offset''
+ * must be 32 bits, i.e. it must be on a dword boundary.
+ *
+ * Returns 1 if successful, 0 otherwise.
+ */
+static inline int write_dword (__u32 offset,__u32 x)
+{
+ __u32 status;
+
+#ifdef LART_DEBUG
+ printk (KERN_DEBUG "%s(): 0x%.8x <- 0x%.8x\n", __func__, offset, x);
+#endif
+
+ /* setup writing */
+ write32 (DATA_TO_FLASH (PGM_SETUP),offset);
+
+ /* write the data */
+ write32 (x,offset);
+
+ /* wait for the write to finish */
+ do
+ {
+ write32 (DATA_TO_FLASH (STATUS_READ),offset);
+ status = FLASH_TO_DATA (read32 (offset));
+ }
+ while ((~status & STATUS_BUSY) != 0);
+
+ /* put the flash back into command mode */
+ write32 (DATA_TO_FLASH (READ_ARRAY),offset);
+
+ /* was the write successful? */
+ if ((status & STATUS_PGM_ERR) || read32 (offset) != x)
+ {
+ printk (KERN_WARNING "%s: write error at address 0x%.8x.\n",module_name,offset);
+ return (0);
+ }
+
+ return (1);
+}
+
+static int flash_write (struct mtd_info *mtd,loff_t to,size_t len,size_t *retlen,const u_char *buf)
+{
+ __u8 tmp[4];
+ int i,n;
+
+#ifdef LART_DEBUG
+ printk (KERN_DEBUG "%s(to = 0x%.8x, len = %d)\n", __func__, (__u32)to, len);
+#endif
+
+ /* sanity checks */
+ if (!len) return (0);
+
+ /* first, we write a 0xFF.... padded byte until we reach a dword boundary */
+ if (to & (BUSWIDTH - 1))
+ {
+ __u32 aligned = to & ~(BUSWIDTH - 1);
+ int gap = to - aligned;
+
+ i = n = 0;
+
+ while (gap--) tmp[i++] = 0xFF;
+ while (len && i < BUSWIDTH) tmp[i++] = buf[n++], len--;
+ while (i < BUSWIDTH) tmp[i++] = 0xFF;
+
+ if (!write_dword (aligned,*((__u32 *) tmp))) return (-EIO);
+
+ to += n;
+ buf += n;
+ *retlen += n;
+ }
+
+ /* now we write dwords until we reach a non-dword boundary */
+ while (len >= BUSWIDTH)
+ {
+ if (!write_dword (to,*((__u32 *) buf))) return (-EIO);
+
+ to += BUSWIDTH;
+ buf += BUSWIDTH;
+ *retlen += BUSWIDTH;
+ len -= BUSWIDTH;
+ }
+
+ /* top up the last unaligned bytes, padded with 0xFF.... */
+ if (len & (BUSWIDTH - 1))
+ {
+ i = n = 0;
+
+ while (len--) tmp[i++] = buf[n++];
+ while (i < BUSWIDTH) tmp[i++] = 0xFF;
+
+ if (!write_dword (to,*((__u32 *) tmp))) return (-EIO);
+
+ *retlen += n;
+ }
+
+ return (0);
+}
+
+/***************************************************************************************************/
+
+static struct mtd_info mtd;
+
+static struct mtd_erase_region_info erase_regions[] = {
+ /* parameter blocks */
+ {
+ .offset = 0x00000000,
+ .erasesize = FLASH_BLOCKSIZE_PARAM,
+ .numblocks = FLASH_NUMBLOCKS_16m_PARAM,
+ },
+ /* main blocks */
+ {
+ .offset = FLASH_BLOCKSIZE_PARAM * FLASH_NUMBLOCKS_16m_PARAM,
+ .erasesize = FLASH_BLOCKSIZE_MAIN,
+ .numblocks = FLASH_NUMBLOCKS_16m_MAIN,
+ }
+};
+
+static struct mtd_partition lart_partitions[] = {
+ /* blob */
+ {
+ .name = "blob",
+ .offset = BLOB_START,
+ .size = BLOB_LEN,
+ },
+ /* kernel */
+ {
+ .name = "kernel",
+ .offset = KERNEL_START, /* MTDPART_OFS_APPEND */
+ .size = KERNEL_LEN,
+ },
+ /* initial ramdisk / file system */
+ {
+ .name = "file system",
+ .offset = INITRD_START, /* MTDPART_OFS_APPEND */
+ .size = INITRD_LEN, /* MTDPART_SIZ_FULL */
+ }
+};
+#define NUM_PARTITIONS ARRAY_SIZE(lart_partitions)
+
+static int __init lart_flash_init (void)
+{
+ int result;
+ memset (&mtd,0,sizeof (mtd));
+ printk ("MTD driver for LART. Written by Abraham vd Merwe <abraham@2d3d.co.za>\n");
+ printk ("%s: Probing for 28F160x3 flash on LART...\n",module_name);
+ if (!flash_probe ())
+ {
+ printk (KERN_WARNING "%s: Found no LART compatible flash device\n",module_name);
+ return (-ENXIO);
+ }
+ printk ("%s: This looks like a LART board to me.\n",module_name);
+ mtd.name = module_name;
+ mtd.type = MTD_NORFLASH;
+ mtd.writesize = 1;
+ mtd.writebufsize = 4;
+ mtd.flags = MTD_CAP_NORFLASH;
+ mtd.size = FLASH_BLOCKSIZE_PARAM * FLASH_NUMBLOCKS_16m_PARAM + FLASH_BLOCKSIZE_MAIN * FLASH_NUMBLOCKS_16m_MAIN;
+ mtd.erasesize = FLASH_BLOCKSIZE_MAIN;
+ mtd.numeraseregions = ARRAY_SIZE(erase_regions);
+ mtd.eraseregions = erase_regions;
+ mtd._erase = flash_erase;
+ mtd._read = flash_read;
+ mtd._write = flash_write;
+ mtd.owner = THIS_MODULE;
+
+#ifdef LART_DEBUG
+ printk (KERN_DEBUG
+ "mtd.name = %s\n"
+ "mtd.size = 0x%.8x (%uM)\n"
+ "mtd.erasesize = 0x%.8x (%uK)\n"
+ "mtd.numeraseregions = %d\n",
+ mtd.name,
+ mtd.size,mtd.size / (1024*1024),
+ mtd.erasesize,mtd.erasesize / 1024,
+ mtd.numeraseregions);
+
+ if (mtd.numeraseregions)
+ for (result = 0; result < mtd.numeraseregions; result++)
+ printk (KERN_DEBUG
+ "\n\n"
+ "mtd.eraseregions[%d].offset = 0x%.8x\n"
+ "mtd.eraseregions[%d].erasesize = 0x%.8x (%uK)\n"
+ "mtd.eraseregions[%d].numblocks = %d\n",
+ result,mtd.eraseregions[result].offset,
+ result,mtd.eraseregions[result].erasesize,mtd.eraseregions[result].erasesize / 1024,
+ result,mtd.eraseregions[result].numblocks);
+
+ printk ("\npartitions = %d\n", ARRAY_SIZE(lart_partitions));
+
+ for (result = 0; result < ARRAY_SIZE(lart_partitions); result++)
+ printk (KERN_DEBUG
+ "\n\n"
+ "lart_partitions[%d].name = %s\n"
+ "lart_partitions[%d].offset = 0x%.8x\n"
+ "lart_partitions[%d].size = 0x%.8x (%uK)\n",
+ result,lart_partitions[result].name,
+ result,lart_partitions[result].offset,
+ result,lart_partitions[result].size,lart_partitions[result].size / 1024);
+#endif
+
+ result = mtd_device_register(&mtd, lart_partitions,
+ ARRAY_SIZE(lart_partitions));
+
+ return (result);
+}
+
+static void __exit lart_flash_exit (void)
+{
+ mtd_device_unregister(&mtd);
+}
+
+module_init (lart_flash_init);
+module_exit (lart_flash_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Abraham vd Merwe <abraham@2d3d.co.za>");
+MODULE_DESCRIPTION("MTD driver for Intel 28F160F3 on LART board");
diff --git a/kernel/drivers/mtd/devices/m25p80.c b/kernel/drivers/mtd/devices/m25p80.c
new file mode 100644
index 000000000..3af137f49
--- /dev/null
+++ b/kernel/drivers/mtd/devices/m25p80.c
@@ -0,0 +1,332 @@
+/*
+ * MTD SPI driver for ST M25Pxx (and similar) serial flash chips
+ *
+ * Author: Mike Lavender, mike@steroidmicros.com
+ *
+ * Copyright (c) 2005, Intec Automation Inc.
+ *
+ * Some parts are based on lart.c by Abraham Van Der Merwe
+ *
+ * Cleaned up and generalized based on mtd_dataflash.c
+ *
+ * This code is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/err.h>
+#include <linux/errno.h>
+#include <linux/module.h>
+#include <linux/device.h>
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+
+#include <linux/spi/spi.h>
+#include <linux/spi/flash.h>
+#include <linux/mtd/spi-nor.h>
+
+#define MAX_CMD_SIZE 6
+struct m25p {
+ struct spi_device *spi;
+ struct spi_nor spi_nor;
+ struct mtd_info mtd;
+ u8 command[MAX_CMD_SIZE];
+};
+
+static int m25p80_read_reg(struct spi_nor *nor, u8 code, u8 *val, int len)
+{
+ struct m25p *flash = nor->priv;
+ struct spi_device *spi = flash->spi;
+ int ret;
+
+ ret = spi_write_then_read(spi, &code, 1, val, len);
+ if (ret < 0)
+ dev_err(&spi->dev, "error %d reading %x\n", ret, code);
+
+ return ret;
+}
+
+static void m25p_addr2cmd(struct spi_nor *nor, unsigned int addr, u8 *cmd)
+{
+ /* opcode is in cmd[0] */
+ cmd[1] = addr >> (nor->addr_width * 8 - 8);
+ cmd[2] = addr >> (nor->addr_width * 8 - 16);
+ cmd[3] = addr >> (nor->addr_width * 8 - 24);
+ cmd[4] = addr >> (nor->addr_width * 8 - 32);
+}
+
+static int m25p_cmdsz(struct spi_nor *nor)
+{
+ return 1 + nor->addr_width;
+}
+
+static int m25p80_write_reg(struct spi_nor *nor, u8 opcode, u8 *buf, int len,
+ int wr_en)
+{
+ struct m25p *flash = nor->priv;
+ struct spi_device *spi = flash->spi;
+
+ flash->command[0] = opcode;
+ if (buf)
+ memcpy(&flash->command[1], buf, len);
+
+ return spi_write(spi, flash->command, len + 1);
+}
+
+static void m25p80_write(struct spi_nor *nor, loff_t to, size_t len,
+ size_t *retlen, const u_char *buf)
+{
+ struct m25p *flash = nor->priv;
+ struct spi_device *spi = flash->spi;
+ struct spi_transfer t[2] = {};
+ struct spi_message m;
+ int cmd_sz = m25p_cmdsz(nor);
+
+ spi_message_init(&m);
+
+ if (nor->program_opcode == SPINOR_OP_AAI_WP && nor->sst_write_second)
+ cmd_sz = 1;
+
+ flash->command[0] = nor->program_opcode;
+ m25p_addr2cmd(nor, to, flash->command);
+
+ t[0].tx_buf = flash->command;
+ t[0].len = cmd_sz;
+ spi_message_add_tail(&t[0], &m);
+
+ t[1].tx_buf = buf;
+ t[1].len = len;
+ spi_message_add_tail(&t[1], &m);
+
+ spi_sync(spi, &m);
+
+ *retlen += m.actual_length - cmd_sz;
+}
+
+static inline unsigned int m25p80_rx_nbits(struct spi_nor *nor)
+{
+ switch (nor->flash_read) {
+ case SPI_NOR_DUAL:
+ return 2;
+ case SPI_NOR_QUAD:
+ return 4;
+ default:
+ return 0;
+ }
+}
+
+/*
+ * Read an address range from the nor chip. The address range
+ * may be any size provided it is within the physical boundaries.
+ */
+static int m25p80_read(struct spi_nor *nor, loff_t from, size_t len,
+ size_t *retlen, u_char *buf)
+{
+ struct m25p *flash = nor->priv;
+ struct spi_device *spi = flash->spi;
+ struct spi_transfer t[2];
+ struct spi_message m;
+ unsigned int dummy = nor->read_dummy;
+
+ /* convert the dummy cycles to the number of bytes */
+ dummy /= 8;
+
+ spi_message_init(&m);
+ memset(t, 0, (sizeof t));
+
+ flash->command[0] = nor->read_opcode;
+ m25p_addr2cmd(nor, from, flash->command);
+
+ t[0].tx_buf = flash->command;
+ t[0].len = m25p_cmdsz(nor) + dummy;
+ spi_message_add_tail(&t[0], &m);
+
+ t[1].rx_buf = buf;
+ t[1].rx_nbits = m25p80_rx_nbits(nor);
+ t[1].len = len;
+ spi_message_add_tail(&t[1], &m);
+
+ spi_sync(spi, &m);
+
+ *retlen = m.actual_length - m25p_cmdsz(nor) - dummy;
+ return 0;
+}
+
+static int m25p80_erase(struct spi_nor *nor, loff_t offset)
+{
+ struct m25p *flash = nor->priv;
+
+ dev_dbg(nor->dev, "%dKiB at 0x%08x\n",
+ flash->mtd.erasesize / 1024, (u32)offset);
+
+ /* Set up command buffer. */
+ flash->command[0] = nor->erase_opcode;
+ m25p_addr2cmd(nor, offset, flash->command);
+
+ spi_write(flash->spi, flash->command, m25p_cmdsz(nor));
+
+ return 0;
+}
+
+/*
+ * board specific setup should have ensured the SPI clock used here
+ * matches what the READ command supports, at least until this driver
+ * understands FAST_READ (for clocks over 25 MHz).
+ */
+static int m25p_probe(struct spi_device *spi)
+{
+ struct mtd_part_parser_data ppdata;
+ struct flash_platform_data *data;
+ struct m25p *flash;
+ struct spi_nor *nor;
+ enum read_mode mode = SPI_NOR_NORMAL;
+ char *flash_name = NULL;
+ int ret;
+
+ data = dev_get_platdata(&spi->dev);
+
+ flash = devm_kzalloc(&spi->dev, sizeof(*flash), GFP_KERNEL);
+ if (!flash)
+ return -ENOMEM;
+
+ nor = &flash->spi_nor;
+
+ /* install the hooks */
+ nor->read = m25p80_read;
+ nor->write = m25p80_write;
+ nor->erase = m25p80_erase;
+ nor->write_reg = m25p80_write_reg;
+ nor->read_reg = m25p80_read_reg;
+
+ nor->dev = &spi->dev;
+ nor->mtd = &flash->mtd;
+ nor->priv = flash;
+
+ spi_set_drvdata(spi, flash);
+ flash->mtd.priv = nor;
+ flash->spi = spi;
+
+ if (spi->mode & SPI_RX_QUAD)
+ mode = SPI_NOR_QUAD;
+ else if (spi->mode & SPI_RX_DUAL)
+ mode = SPI_NOR_DUAL;
+
+ if (data && data->name)
+ flash->mtd.name = data->name;
+
+ /* For some (historical?) reason many platforms provide two different
+ * names in flash_platform_data: "name" and "type". Quite often name is
+ * set to "m25p80" and then "type" provides a real chip name.
+ * If that's the case, respect "type" and ignore a "name".
+ */
+ if (data && data->type)
+ flash_name = data->type;
+ else if (!strcmp(spi->modalias, "spi-nor"))
+ flash_name = NULL; /* auto-detect */
+ else
+ flash_name = spi->modalias;
+
+ ret = spi_nor_scan(nor, flash_name, mode);
+ if (ret)
+ return ret;
+
+ ppdata.of_node = spi->dev.of_node;
+
+ return mtd_device_parse_register(&flash->mtd, NULL, &ppdata,
+ data ? data->parts : NULL,
+ data ? data->nr_parts : 0);
+}
+
+
+static int m25p_remove(struct spi_device *spi)
+{
+ struct m25p *flash = spi_get_drvdata(spi);
+
+ /* Clean up MTD stuff. */
+ return mtd_device_unregister(&flash->mtd);
+}
+
+/*
+ * Do NOT add to this array without reading the following:
+ *
+ * Historically, many flash devices are bound to this driver by their name. But
+ * since most of these flash are compatible to some extent, and their
+ * differences can often be differentiated by the JEDEC read-ID command, we
+ * encourage new users to add support to the spi-nor library, and simply bind
+ * against a generic string here (e.g., "jedec,spi-nor").
+ *
+ * Many flash names are kept here in this list (as well as in spi-nor.c) to
+ * keep them available as module aliases for existing platforms.
+ */
+static const struct spi_device_id m25p_ids[] = {
+ {"at25fs010"}, {"at25fs040"}, {"at25df041a"}, {"at25df321a"},
+ {"at25df641"}, {"at26f004"}, {"at26df081a"}, {"at26df161a"},
+ {"at26df321"}, {"at45db081d"},
+ {"en25f32"}, {"en25p32"}, {"en25q32b"}, {"en25p64"},
+ {"en25q64"}, {"en25qh128"}, {"en25qh256"},
+ {"f25l32pa"},
+ {"mr25h256"}, {"mr25h10"},
+ {"gd25q32"}, {"gd25q64"},
+ {"160s33b"}, {"320s33b"}, {"640s33b"},
+ {"mx25l2005a"}, {"mx25l4005a"}, {"mx25l8005"}, {"mx25l1606e"},
+ {"mx25l3205d"}, {"mx25l3255e"}, {"mx25l6405d"}, {"mx25l12805d"},
+ {"mx25l12855e"},{"mx25l25635e"},{"mx25l25655e"},{"mx66l51235l"},
+ {"mx66l1g55g"},
+ {"n25q064"}, {"n25q128a11"}, {"n25q128a13"}, {"n25q256a"},
+ {"n25q512a"}, {"n25q512ax3"}, {"n25q00"},
+ {"pm25lv512"}, {"pm25lv010"}, {"pm25lq032"},
+ {"s25sl032p"}, {"s25sl064p"}, {"s25fl256s0"}, {"s25fl256s1"},
+ {"s25fl512s"}, {"s70fl01gs"}, {"s25sl12800"}, {"s25sl12801"},
+ {"s25fl129p0"}, {"s25fl129p1"}, {"s25sl004a"}, {"s25sl008a"},
+ {"s25sl016a"}, {"s25sl032a"}, {"s25sl064a"}, {"s25fl008k"},
+ {"s25fl016k"}, {"s25fl064k"}, {"s25fl132k"},
+ {"sst25vf040b"},{"sst25vf080b"},{"sst25vf016b"},{"sst25vf032b"},
+ {"sst25vf064c"},{"sst25wf512"}, {"sst25wf010"}, {"sst25wf020"},
+ {"sst25wf040"},
+ {"m25p05"}, {"m25p10"}, {"m25p20"}, {"m25p40"},
+ {"m25p80"}, {"m25p16"}, {"m25p32"}, {"m25p64"},
+ {"m25p128"}, {"n25q032"},
+ {"m25p05-nonjedec"}, {"m25p10-nonjedec"}, {"m25p20-nonjedec"},
+ {"m25p40-nonjedec"}, {"m25p80-nonjedec"}, {"m25p16-nonjedec"},
+ {"m25p32-nonjedec"}, {"m25p64-nonjedec"}, {"m25p128-nonjedec"},
+ {"m45pe10"}, {"m45pe80"}, {"m45pe16"},
+ {"m25pe20"}, {"m25pe80"}, {"m25pe16"},
+ {"m25px16"}, {"m25px32"}, {"m25px32-s0"}, {"m25px32-s1"},
+ {"m25px64"}, {"m25px80"},
+ {"w25x10"}, {"w25x20"}, {"w25x40"}, {"w25x80"},
+ {"w25x16"}, {"w25x32"}, {"w25q32"}, {"w25q32dw"},
+ {"w25x64"}, {"w25q64"}, {"w25q80"}, {"w25q80bl"},
+ {"w25q128"}, {"w25q256"}, {"cat25c11"},
+ {"cat25c03"}, {"cat25c09"}, {"cat25c17"}, {"cat25128"},
+
+ /*
+ * Generic support for SPI NOR that can be identified by the JEDEC READ
+ * ID opcode (0x9F). Use this, if possible.
+ */
+ {"spi-nor"},
+ { },
+};
+MODULE_DEVICE_TABLE(spi, m25p_ids);
+
+static struct spi_driver m25p80_driver = {
+ .driver = {
+ .name = "m25p80",
+ .owner = THIS_MODULE,
+ },
+ .id_table = m25p_ids,
+ .probe = m25p_probe,
+ .remove = m25p_remove,
+
+ /* REVISIT: many of these chips have deep power-down modes, which
+ * should clearly be entered on suspend() to minimize power use.
+ * And also when they're otherwise idle...
+ */
+};
+
+module_spi_driver(m25p80_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Mike Lavender");
+MODULE_DESCRIPTION("MTD SPI driver for ST M25Pxx flash chips");
diff --git a/kernel/drivers/mtd/devices/ms02-nv.c b/kernel/drivers/mtd/devices/ms02-nv.c
new file mode 100644
index 000000000..5c8b322ba
--- /dev/null
+++ b/kernel/drivers/mtd/devices/ms02-nv.c
@@ -0,0 +1,311 @@
+/*
+ * Copyright (c) 2001 Maciej W. Rozycki
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/init.h>
+#include <linux/ioport.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/mtd/mtd.h>
+#include <linux/slab.h>
+#include <linux/types.h>
+
+#include <asm/addrspace.h>
+#include <asm/bootinfo.h>
+#include <asm/dec/ioasic_addrs.h>
+#include <asm/dec/kn02.h>
+#include <asm/dec/kn03.h>
+#include <asm/io.h>
+#include <asm/paccess.h>
+
+#include "ms02-nv.h"
+
+
+static char version[] __initdata =
+ "ms02-nv.c: v.1.0.0 13 Aug 2001 Maciej W. Rozycki.\n";
+
+MODULE_AUTHOR("Maciej W. Rozycki <macro@linux-mips.org>");
+MODULE_DESCRIPTION("DEC MS02-NV NVRAM module driver");
+MODULE_LICENSE("GPL");
+
+
+/*
+ * Addresses we probe for an MS02-NV at. Modules may be located
+ * at any 8MiB boundary within a 0MiB up to 112MiB range or at any 32MiB
+ * boundary within a 0MiB up to 448MiB range. We don't support a module
+ * at 0MiB, though.
+ */
+static ulong ms02nv_addrs[] __initdata = {
+ 0x07000000, 0x06800000, 0x06000000, 0x05800000, 0x05000000,
+ 0x04800000, 0x04000000, 0x03800000, 0x03000000, 0x02800000,
+ 0x02000000, 0x01800000, 0x01000000, 0x00800000
+};
+
+static const char ms02nv_name[] = "DEC MS02-NV NVRAM";
+static const char ms02nv_res_diag_ram[] = "Diagnostic RAM";
+static const char ms02nv_res_user_ram[] = "General-purpose RAM";
+static const char ms02nv_res_csr[] = "Control and status register";
+
+static struct mtd_info *root_ms02nv_mtd;
+
+
+static int ms02nv_read(struct mtd_info *mtd, loff_t from,
+ size_t len, size_t *retlen, u_char *buf)
+{
+ struct ms02nv_private *mp = mtd->priv;
+
+ memcpy(buf, mp->uaddr + from, len);
+ *retlen = len;
+ return 0;
+}
+
+static int ms02nv_write(struct mtd_info *mtd, loff_t to,
+ size_t len, size_t *retlen, const u_char *buf)
+{
+ struct ms02nv_private *mp = mtd->priv;
+
+ memcpy(mp->uaddr + to, buf, len);
+ *retlen = len;
+ return 0;
+}
+
+
+static inline uint ms02nv_probe_one(ulong addr)
+{
+ ms02nv_uint *ms02nv_diagp;
+ ms02nv_uint *ms02nv_magicp;
+ uint ms02nv_diag;
+ uint ms02nv_magic;
+ size_t size;
+
+ int err;
+
+ /*
+ * The firmware writes MS02NV_ID at MS02NV_MAGIC and also
+ * a diagnostic status at MS02NV_DIAG.
+ */
+ ms02nv_diagp = (ms02nv_uint *)(CKSEG1ADDR(addr + MS02NV_DIAG));
+ ms02nv_magicp = (ms02nv_uint *)(CKSEG1ADDR(addr + MS02NV_MAGIC));
+ err = get_dbe(ms02nv_magic, ms02nv_magicp);
+ if (err)
+ return 0;
+ if (ms02nv_magic != MS02NV_ID)
+ return 0;
+
+ ms02nv_diag = *ms02nv_diagp;
+ size = (ms02nv_diag & MS02NV_DIAG_SIZE_MASK) << MS02NV_DIAG_SIZE_SHIFT;
+ if (size > MS02NV_CSR)
+ size = MS02NV_CSR;
+
+ return size;
+}
+
+static int __init ms02nv_init_one(ulong addr)
+{
+ struct mtd_info *mtd;
+ struct ms02nv_private *mp;
+ struct resource *mod_res;
+ struct resource *diag_res;
+ struct resource *user_res;
+ struct resource *csr_res;
+ ulong fixaddr;
+ size_t size, fixsize;
+
+ static int version_printed;
+
+ int ret = -ENODEV;
+
+ /* The module decodes 8MiB of address space. */
+ mod_res = kzalloc(sizeof(*mod_res), GFP_KERNEL);
+ if (!mod_res)
+ return -ENOMEM;
+
+ mod_res->name = ms02nv_name;
+ mod_res->start = addr;
+ mod_res->end = addr + MS02NV_SLOT_SIZE - 1;
+ mod_res->flags = IORESOURCE_MEM | IORESOURCE_BUSY;
+ if (request_resource(&iomem_resource, mod_res) < 0)
+ goto err_out_mod_res;
+
+ size = ms02nv_probe_one(addr);
+ if (!size)
+ goto err_out_mod_res_rel;
+
+ if (!version_printed) {
+ printk(KERN_INFO "%s", version);
+ version_printed = 1;
+ }
+
+ ret = -ENOMEM;
+ mtd = kzalloc(sizeof(*mtd), GFP_KERNEL);
+ if (!mtd)
+ goto err_out_mod_res_rel;
+ mp = kzalloc(sizeof(*mp), GFP_KERNEL);
+ if (!mp)
+ goto err_out_mtd;
+
+ mtd->priv = mp;
+ mp->resource.module = mod_res;
+
+ /* Firmware's diagnostic NVRAM area. */
+ diag_res = kzalloc(sizeof(*diag_res), GFP_KERNEL);
+ if (!diag_res)
+ goto err_out_mp;
+
+ diag_res->name = ms02nv_res_diag_ram;
+ diag_res->start = addr;
+ diag_res->end = addr + MS02NV_RAM - 1;
+ diag_res->flags = IORESOURCE_BUSY;
+ request_resource(mod_res, diag_res);
+
+ mp->resource.diag_ram = diag_res;
+
+ /* User-available general-purpose NVRAM area. */
+ user_res = kzalloc(sizeof(*user_res), GFP_KERNEL);
+ if (!user_res)
+ goto err_out_diag_res;
+
+ user_res->name = ms02nv_res_user_ram;
+ user_res->start = addr + MS02NV_RAM;
+ user_res->end = addr + size - 1;
+ user_res->flags = IORESOURCE_BUSY;
+ request_resource(mod_res, user_res);
+
+ mp->resource.user_ram = user_res;
+
+ /* Control and status register. */
+ csr_res = kzalloc(sizeof(*csr_res), GFP_KERNEL);
+ if (!csr_res)
+ goto err_out_user_res;
+
+ csr_res->name = ms02nv_res_csr;
+ csr_res->start = addr + MS02NV_CSR;
+ csr_res->end = addr + MS02NV_CSR + 3;
+ csr_res->flags = IORESOURCE_BUSY;
+ request_resource(mod_res, csr_res);
+
+ mp->resource.csr = csr_res;
+
+ mp->addr = phys_to_virt(addr);
+ mp->size = size;
+
+ /*
+ * Hide the firmware's diagnostic area. It may get destroyed
+ * upon a reboot. Take paging into account for mapping support.
+ */
+ fixaddr = (addr + MS02NV_RAM + PAGE_SIZE - 1) & ~(PAGE_SIZE - 1);
+ fixsize = (size - (fixaddr - addr)) & ~(PAGE_SIZE - 1);
+ mp->uaddr = phys_to_virt(fixaddr);
+
+ mtd->type = MTD_RAM;
+ mtd->flags = MTD_CAP_RAM;
+ mtd->size = fixsize;
+ mtd->name = ms02nv_name;
+ mtd->owner = THIS_MODULE;
+ mtd->_read = ms02nv_read;
+ mtd->_write = ms02nv_write;
+ mtd->writesize = 1;
+
+ ret = -EIO;
+ if (mtd_device_register(mtd, NULL, 0)) {
+ printk(KERN_ERR
+ "ms02-nv: Unable to register MTD device, aborting!\n");
+ goto err_out_csr_res;
+ }
+
+ printk(KERN_INFO "mtd%d: %s at 0x%08lx, size %zuMiB.\n",
+ mtd->index, ms02nv_name, addr, size >> 20);
+
+ mp->next = root_ms02nv_mtd;
+ root_ms02nv_mtd = mtd;
+
+ return 0;
+
+
+err_out_csr_res:
+ release_resource(csr_res);
+ kfree(csr_res);
+err_out_user_res:
+ release_resource(user_res);
+ kfree(user_res);
+err_out_diag_res:
+ release_resource(diag_res);
+ kfree(diag_res);
+err_out_mp:
+ kfree(mp);
+err_out_mtd:
+ kfree(mtd);
+err_out_mod_res_rel:
+ release_resource(mod_res);
+err_out_mod_res:
+ kfree(mod_res);
+ return ret;
+}
+
+static void __exit ms02nv_remove_one(void)
+{
+ struct mtd_info *mtd = root_ms02nv_mtd;
+ struct ms02nv_private *mp = mtd->priv;
+
+ root_ms02nv_mtd = mp->next;
+
+ mtd_device_unregister(mtd);
+
+ release_resource(mp->resource.csr);
+ kfree(mp->resource.csr);
+ release_resource(mp->resource.user_ram);
+ kfree(mp->resource.user_ram);
+ release_resource(mp->resource.diag_ram);
+ kfree(mp->resource.diag_ram);
+ release_resource(mp->resource.module);
+ kfree(mp->resource.module);
+ kfree(mp);
+ kfree(mtd);
+}
+
+
+static int __init ms02nv_init(void)
+{
+ volatile u32 *csr;
+ uint stride = 0;
+ int count = 0;
+ int i;
+
+ switch (mips_machtype) {
+ case MACH_DS5000_200:
+ csr = (volatile u32 *)CKSEG1ADDR(KN02_SLOT_BASE + KN02_CSR);
+ if (*csr & KN02_CSR_BNK32M)
+ stride = 2;
+ break;
+ case MACH_DS5000_2X0:
+ case MACH_DS5900:
+ csr = (volatile u32 *)CKSEG1ADDR(KN03_SLOT_BASE + IOASIC_MCR);
+ if (*csr & KN03_MCR_BNK32M)
+ stride = 2;
+ break;
+ default:
+ return -ENODEV;
+ break;
+ }
+
+ for (i = 0; i < ARRAY_SIZE(ms02nv_addrs); i++)
+ if (!ms02nv_init_one(ms02nv_addrs[i] << stride))
+ count++;
+
+ return (count > 0) ? 0 : -ENODEV;
+}
+
+static void __exit ms02nv_cleanup(void)
+{
+ while (root_ms02nv_mtd)
+ ms02nv_remove_one();
+}
+
+
+module_init(ms02nv_init);
+module_exit(ms02nv_cleanup);
diff --git a/kernel/drivers/mtd/devices/ms02-nv.h b/kernel/drivers/mtd/devices/ms02-nv.h
new file mode 100644
index 000000000..04deafd3a
--- /dev/null
+++ b/kernel/drivers/mtd/devices/ms02-nv.h
@@ -0,0 +1,105 @@
+/*
+ * Copyright (c) 2001, 2003 Maciej W. Rozycki
+ *
+ * DEC MS02-NV (54-20948-01) battery backed-up NVRAM module for
+ * DECstation/DECsystem 5000/2x0 and DECsystem 5900 and 5900/260
+ * systems.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/ioport.h>
+#include <linux/mtd/mtd.h>
+
+/*
+ * Addresses are decoded as follows:
+ *
+ * 0x000000 - 0x3fffff SRAM
+ * 0x400000 - 0x7fffff CSR
+ *
+ * Within the SRAM area the following ranges are forced by the system
+ * firmware:
+ *
+ * 0x000000 - 0x0003ff diagnostic area, destroyed upon a reboot
+ * 0x000400 - ENDofRAM storage area, available to operating systems
+ *
+ * but we can't really use the available area right from 0x000400 as
+ * the first word is used by the firmware as a status flag passed
+ * from an operating system. If anything but the valid data magic
+ * ID value is found, the firmware considers the SRAM clean, i.e.
+ * containing no valid data, and disables the battery resulting in
+ * data being erased as soon as power is switched off. So the choice
+ * for the start address of the user-available is 0x001000 which is
+ * nicely page aligned. The area between 0x000404 and 0x000fff may
+ * be used by the driver for own needs.
+ *
+ * The diagnostic area defines two status words to be read by an
+ * operating system, a magic ID to distinguish a MS02-NV board from
+ * anything else and a status information providing results of tests
+ * as well as the size of SRAM available, which can be 1MiB or 2MiB
+ * (that's what the firmware handles; no idea if 2MiB modules ever
+ * existed).
+ *
+ * The firmware only handles the MS02-NV board if installed in the
+ * last (15th) slot, so for any other location the status information
+ * stored in the SRAM cannot be relied upon. But from the hardware
+ * point of view there is no problem using up to 14 such boards in a
+ * system -- only the 1st slot needs to be filled with a DRAM module.
+ * The MS02-NV board is ECC-protected, like other MS02 memory boards.
+ *
+ * The state of the battery as provided by the CSR is reflected on
+ * the two onboard LEDs. When facing the battery side of the board,
+ * with the LEDs at the top left and the battery at the bottom right
+ * (i.e. looking from the back side of the system box), their meaning
+ * is as follows (the system has to be powered on):
+ *
+ * left LED battery disable status: lit = enabled
+ * right LED battery condition status: lit = OK
+ */
+
+/* MS02-NV iomem register offsets. */
+#define MS02NV_CSR 0x400000 /* control & status register */
+
+/* MS02-NV CSR status bits. */
+#define MS02NV_CSR_BATT_OK 0x01 /* battery OK */
+#define MS02NV_CSR_BATT_OFF 0x02 /* battery disabled */
+
+
+/* MS02-NV memory offsets. */
+#define MS02NV_DIAG 0x0003f8 /* diagnostic status */
+#define MS02NV_MAGIC 0x0003fc /* MS02-NV magic ID */
+#define MS02NV_VALID 0x000400 /* valid data magic ID */
+#define MS02NV_RAM 0x001000 /* user-exposed RAM start */
+
+/* MS02-NV diagnostic status bits. */
+#define MS02NV_DIAG_TEST 0x01 /* SRAM test done (?) */
+#define MS02NV_DIAG_RO 0x02 /* SRAM r/o test done */
+#define MS02NV_DIAG_RW 0x04 /* SRAM r/w test done */
+#define MS02NV_DIAG_FAIL 0x08 /* SRAM test failed */
+#define MS02NV_DIAG_SIZE_MASK 0xf0 /* SRAM size mask */
+#define MS02NV_DIAG_SIZE_SHIFT 0x10 /* SRAM size shift (left) */
+
+/* MS02-NV general constants. */
+#define MS02NV_ID 0x03021966 /* MS02-NV magic ID value */
+#define MS02NV_VALID_ID 0xbd100248 /* valid data magic ID value */
+#define MS02NV_SLOT_SIZE 0x800000 /* size of the address space
+ decoded by the module */
+
+
+typedef volatile u32 ms02nv_uint;
+
+struct ms02nv_private {
+ struct mtd_info *next;
+ struct {
+ struct resource *module;
+ struct resource *diag_ram;
+ struct resource *user_ram;
+ struct resource *csr;
+ } resource;
+ u_char *addr;
+ size_t size;
+ u_char *uaddr;
+};
diff --git a/kernel/drivers/mtd/devices/mtd_dataflash.c b/kernel/drivers/mtd/devices/mtd_dataflash.c
new file mode 100644
index 000000000..0099aba72
--- /dev/null
+++ b/kernel/drivers/mtd/devices/mtd_dataflash.c
@@ -0,0 +1,928 @@
+/*
+ * Atmel AT45xxx DataFlash MTD driver for lightweight SPI framework
+ *
+ * Largely derived from at91_dataflash.c:
+ * Copyright (C) 2003-2005 SAN People (Pty) Ltd
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+*/
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/mutex.h>
+#include <linux/err.h>
+#include <linux/math64.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+
+#include <linux/spi/spi.h>
+#include <linux/spi/flash.h>
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+
+/*
+ * DataFlash is a kind of SPI flash. Most AT45 chips have two buffers in
+ * each chip, which may be used for double buffered I/O; but this driver
+ * doesn't (yet) use these for any kind of i/o overlap or prefetching.
+ *
+ * Sometimes DataFlash is packaged in MMC-format cards, although the
+ * MMC stack can't (yet?) distinguish between MMC and DataFlash
+ * protocols during enumeration.
+ */
+
+/* reads can bypass the buffers */
+#define OP_READ_CONTINUOUS 0xE8
+#define OP_READ_PAGE 0xD2
+
+/* group B requests can run even while status reports "busy" */
+#define OP_READ_STATUS 0xD7 /* group B */
+
+/* move data between host and buffer */
+#define OP_READ_BUFFER1 0xD4 /* group B */
+#define OP_READ_BUFFER2 0xD6 /* group B */
+#define OP_WRITE_BUFFER1 0x84 /* group B */
+#define OP_WRITE_BUFFER2 0x87 /* group B */
+
+/* erasing flash */
+#define OP_ERASE_PAGE 0x81
+#define OP_ERASE_BLOCK 0x50
+
+/* move data between buffer and flash */
+#define OP_TRANSFER_BUF1 0x53
+#define OP_TRANSFER_BUF2 0x55
+#define OP_MREAD_BUFFER1 0xD4
+#define OP_MREAD_BUFFER2 0xD6
+#define OP_MWERASE_BUFFER1 0x83
+#define OP_MWERASE_BUFFER2 0x86
+#define OP_MWRITE_BUFFER1 0x88 /* sector must be pre-erased */
+#define OP_MWRITE_BUFFER2 0x89 /* sector must be pre-erased */
+
+/* write to buffer, then write-erase to flash */
+#define OP_PROGRAM_VIA_BUF1 0x82
+#define OP_PROGRAM_VIA_BUF2 0x85
+
+/* compare buffer to flash */
+#define OP_COMPARE_BUF1 0x60
+#define OP_COMPARE_BUF2 0x61
+
+/* read flash to buffer, then write-erase to flash */
+#define OP_REWRITE_VIA_BUF1 0x58
+#define OP_REWRITE_VIA_BUF2 0x59
+
+/* newer chips report JEDEC manufacturer and device IDs; chip
+ * serial number and OTP bits; and per-sector writeprotect.
+ */
+#define OP_READ_ID 0x9F
+#define OP_READ_SECURITY 0x77
+#define OP_WRITE_SECURITY_REVC 0x9A
+#define OP_WRITE_SECURITY 0x9B /* revision D */
+
+
+struct dataflash {
+ uint8_t command[4];
+ char name[24];
+
+ unsigned short page_offset; /* offset in flash address */
+ unsigned int page_size; /* of bytes per page */
+
+ struct mutex lock;
+ struct spi_device *spi;
+
+ struct mtd_info mtd;
+};
+
+#ifdef CONFIG_OF
+static const struct of_device_id dataflash_dt_ids[] = {
+ { .compatible = "atmel,at45", },
+ { .compatible = "atmel,dataflash", },
+ { /* sentinel */ }
+};
+#endif
+
+/* ......................................................................... */
+
+/*
+ * Return the status of the DataFlash device.
+ */
+static inline int dataflash_status(struct spi_device *spi)
+{
+ /* NOTE: at45db321c over 25 MHz wants to write
+ * a dummy byte after the opcode...
+ */
+ return spi_w8r8(spi, OP_READ_STATUS);
+}
+
+/*
+ * Poll the DataFlash device until it is READY.
+ * This usually takes 5-20 msec or so; more for sector erase.
+ */
+static int dataflash_waitready(struct spi_device *spi)
+{
+ int status;
+
+ for (;;) {
+ status = dataflash_status(spi);
+ if (status < 0) {
+ pr_debug("%s: status %d?\n",
+ dev_name(&spi->dev), status);
+ status = 0;
+ }
+
+ if (status & (1 << 7)) /* RDY/nBSY */
+ return status;
+
+ msleep(3);
+ }
+}
+
+/* ......................................................................... */
+
+/*
+ * Erase pages of flash.
+ */
+static int dataflash_erase(struct mtd_info *mtd, struct erase_info *instr)
+{
+ struct dataflash *priv = mtd->priv;
+ struct spi_device *spi = priv->spi;
+ struct spi_transfer x = { };
+ struct spi_message msg;
+ unsigned blocksize = priv->page_size << 3;
+ uint8_t *command;
+ uint32_t rem;
+
+ pr_debug("%s: erase addr=0x%llx len 0x%llx\n",
+ dev_name(&spi->dev), (long long)instr->addr,
+ (long long)instr->len);
+
+ div_u64_rem(instr->len, priv->page_size, &rem);
+ if (rem)
+ return -EINVAL;
+ div_u64_rem(instr->addr, priv->page_size, &rem);
+ if (rem)
+ return -EINVAL;
+
+ spi_message_init(&msg);
+
+ x.tx_buf = command = priv->command;
+ x.len = 4;
+ spi_message_add_tail(&x, &msg);
+
+ mutex_lock(&priv->lock);
+ while (instr->len > 0) {
+ unsigned int pageaddr;
+ int status;
+ int do_block;
+
+ /* Calculate flash page address; use block erase (for speed) if
+ * we're at a block boundary and need to erase the whole block.
+ */
+ pageaddr = div_u64(instr->addr, priv->page_size);
+ do_block = (pageaddr & 0x7) == 0 && instr->len >= blocksize;
+ pageaddr = pageaddr << priv->page_offset;
+
+ command[0] = do_block ? OP_ERASE_BLOCK : OP_ERASE_PAGE;
+ command[1] = (uint8_t)(pageaddr >> 16);
+ command[2] = (uint8_t)(pageaddr >> 8);
+ command[3] = 0;
+
+ pr_debug("ERASE %s: (%x) %x %x %x [%i]\n",
+ do_block ? "block" : "page",
+ command[0], command[1], command[2], command[3],
+ pageaddr);
+
+ status = spi_sync(spi, &msg);
+ (void) dataflash_waitready(spi);
+
+ if (status < 0) {
+ printk(KERN_ERR "%s: erase %x, err %d\n",
+ dev_name(&spi->dev), pageaddr, status);
+ /* REVISIT: can retry instr->retries times; or
+ * giveup and instr->fail_addr = instr->addr;
+ */
+ continue;
+ }
+
+ if (do_block) {
+ instr->addr += blocksize;
+ instr->len -= blocksize;
+ } else {
+ instr->addr += priv->page_size;
+ instr->len -= priv->page_size;
+ }
+ }
+ mutex_unlock(&priv->lock);
+
+ /* Inform MTD subsystem that erase is complete */
+ instr->state = MTD_ERASE_DONE;
+ mtd_erase_callback(instr);
+
+ return 0;
+}
+
+/*
+ * Read from the DataFlash device.
+ * from : Start offset in flash device
+ * len : Amount to read
+ * retlen : About of data actually read
+ * buf : Buffer containing the data
+ */
+static int dataflash_read(struct mtd_info *mtd, loff_t from, size_t len,
+ size_t *retlen, u_char *buf)
+{
+ struct dataflash *priv = mtd->priv;
+ struct spi_transfer x[2] = { };
+ struct spi_message msg;
+ unsigned int addr;
+ uint8_t *command;
+ int status;
+
+ pr_debug("%s: read 0x%x..0x%x\n", dev_name(&priv->spi->dev),
+ (unsigned)from, (unsigned)(from + len));
+
+ /* Calculate flash page/byte address */
+ addr = (((unsigned)from / priv->page_size) << priv->page_offset)
+ + ((unsigned)from % priv->page_size);
+
+ command = priv->command;
+
+ pr_debug("READ: (%x) %x %x %x\n",
+ command[0], command[1], command[2], command[3]);
+
+ spi_message_init(&msg);
+
+ x[0].tx_buf = command;
+ x[0].len = 8;
+ spi_message_add_tail(&x[0], &msg);
+
+ x[1].rx_buf = buf;
+ x[1].len = len;
+ spi_message_add_tail(&x[1], &msg);
+
+ mutex_lock(&priv->lock);
+
+ /* Continuous read, max clock = f(car) which may be less than
+ * the peak rate available. Some chips support commands with
+ * fewer "don't care" bytes. Both buffers stay unchanged.
+ */
+ command[0] = OP_READ_CONTINUOUS;
+ command[1] = (uint8_t)(addr >> 16);
+ command[2] = (uint8_t)(addr >> 8);
+ command[3] = (uint8_t)(addr >> 0);
+ /* plus 4 "don't care" bytes */
+
+ status = spi_sync(priv->spi, &msg);
+ mutex_unlock(&priv->lock);
+
+ if (status >= 0) {
+ *retlen = msg.actual_length - 8;
+ status = 0;
+ } else
+ pr_debug("%s: read %x..%x --> %d\n",
+ dev_name(&priv->spi->dev),
+ (unsigned)from, (unsigned)(from + len),
+ status);
+ return status;
+}
+
+/*
+ * Write to the DataFlash device.
+ * to : Start offset in flash device
+ * len : Amount to write
+ * retlen : Amount of data actually written
+ * buf : Buffer containing the data
+ */
+static int dataflash_write(struct mtd_info *mtd, loff_t to, size_t len,
+ size_t * retlen, const u_char * buf)
+{
+ struct dataflash *priv = mtd->priv;
+ struct spi_device *spi = priv->spi;
+ struct spi_transfer x[2] = { };
+ struct spi_message msg;
+ unsigned int pageaddr, addr, offset, writelen;
+ size_t remaining = len;
+ u_char *writebuf = (u_char *) buf;
+ int status = -EINVAL;
+ uint8_t *command;
+
+ pr_debug("%s: write 0x%x..0x%x\n",
+ dev_name(&spi->dev), (unsigned)to, (unsigned)(to + len));
+
+ spi_message_init(&msg);
+
+ x[0].tx_buf = command = priv->command;
+ x[0].len = 4;
+ spi_message_add_tail(&x[0], &msg);
+
+ pageaddr = ((unsigned)to / priv->page_size);
+ offset = ((unsigned)to % priv->page_size);
+ if (offset + len > priv->page_size)
+ writelen = priv->page_size - offset;
+ else
+ writelen = len;
+
+ mutex_lock(&priv->lock);
+ while (remaining > 0) {
+ pr_debug("write @ %i:%i len=%i\n",
+ pageaddr, offset, writelen);
+
+ /* REVISIT:
+ * (a) each page in a sector must be rewritten at least
+ * once every 10K sibling erase/program operations.
+ * (b) for pages that are already erased, we could
+ * use WRITE+MWRITE not PROGRAM for ~30% speedup.
+ * (c) WRITE to buffer could be done while waiting for
+ * a previous MWRITE/MWERASE to complete ...
+ * (d) error handling here seems to be mostly missing.
+ *
+ * Two persistent bits per page, plus a per-sector counter,
+ * could support (a) and (b) ... we might consider using
+ * the second half of sector zero, which is just one block,
+ * to track that state. (On AT91, that sector should also
+ * support boot-from-DataFlash.)
+ */
+
+ addr = pageaddr << priv->page_offset;
+
+ /* (1) Maybe transfer partial page to Buffer1 */
+ if (writelen != priv->page_size) {
+ command[0] = OP_TRANSFER_BUF1;
+ command[1] = (addr & 0x00FF0000) >> 16;
+ command[2] = (addr & 0x0000FF00) >> 8;
+ command[3] = 0;
+
+ pr_debug("TRANSFER: (%x) %x %x %x\n",
+ command[0], command[1], command[2], command[3]);
+
+ status = spi_sync(spi, &msg);
+ if (status < 0)
+ pr_debug("%s: xfer %u -> %d\n",
+ dev_name(&spi->dev), addr, status);
+
+ (void) dataflash_waitready(priv->spi);
+ }
+
+ /* (2) Program full page via Buffer1 */
+ addr += offset;
+ command[0] = OP_PROGRAM_VIA_BUF1;
+ command[1] = (addr & 0x00FF0000) >> 16;
+ command[2] = (addr & 0x0000FF00) >> 8;
+ command[3] = (addr & 0x000000FF);
+
+ pr_debug("PROGRAM: (%x) %x %x %x\n",
+ command[0], command[1], command[2], command[3]);
+
+ x[1].tx_buf = writebuf;
+ x[1].len = writelen;
+ spi_message_add_tail(x + 1, &msg);
+ status = spi_sync(spi, &msg);
+ spi_transfer_del(x + 1);
+ if (status < 0)
+ pr_debug("%s: pgm %u/%u -> %d\n",
+ dev_name(&spi->dev), addr, writelen, status);
+
+ (void) dataflash_waitready(priv->spi);
+
+
+#ifdef CONFIG_MTD_DATAFLASH_WRITE_VERIFY
+
+ /* (3) Compare to Buffer1 */
+ addr = pageaddr << priv->page_offset;
+ command[0] = OP_COMPARE_BUF1;
+ command[1] = (addr & 0x00FF0000) >> 16;
+ command[2] = (addr & 0x0000FF00) >> 8;
+ command[3] = 0;
+
+ pr_debug("COMPARE: (%x) %x %x %x\n",
+ command[0], command[1], command[2], command[3]);
+
+ status = spi_sync(spi, &msg);
+ if (status < 0)
+ pr_debug("%s: compare %u -> %d\n",
+ dev_name(&spi->dev), addr, status);
+
+ status = dataflash_waitready(priv->spi);
+
+ /* Check result of the compare operation */
+ if (status & (1 << 6)) {
+ printk(KERN_ERR "%s: compare page %u, err %d\n",
+ dev_name(&spi->dev), pageaddr, status);
+ remaining = 0;
+ status = -EIO;
+ break;
+ } else
+ status = 0;
+
+#endif /* CONFIG_MTD_DATAFLASH_WRITE_VERIFY */
+
+ remaining = remaining - writelen;
+ pageaddr++;
+ offset = 0;
+ writebuf += writelen;
+ *retlen += writelen;
+
+ if (remaining > priv->page_size)
+ writelen = priv->page_size;
+ else
+ writelen = remaining;
+ }
+ mutex_unlock(&priv->lock);
+
+ return status;
+}
+
+/* ......................................................................... */
+
+#ifdef CONFIG_MTD_DATAFLASH_OTP
+
+static int dataflash_get_otp_info(struct mtd_info *mtd, size_t len,
+ size_t *retlen, struct otp_info *info)
+{
+ /* Report both blocks as identical: bytes 0..64, locked.
+ * Unless the user block changed from all-ones, we can't
+ * tell whether it's still writable; so we assume it isn't.
+ */
+ info->start = 0;
+ info->length = 64;
+ info->locked = 1;
+ *retlen = sizeof(*info);
+ return 0;
+}
+
+static ssize_t otp_read(struct spi_device *spi, unsigned base,
+ uint8_t *buf, loff_t off, size_t len)
+{
+ struct spi_message m;
+ size_t l;
+ uint8_t *scratch;
+ struct spi_transfer t;
+ int status;
+
+ if (off > 64)
+ return -EINVAL;
+
+ if ((off + len) > 64)
+ len = 64 - off;
+
+ spi_message_init(&m);
+
+ l = 4 + base + off + len;
+ scratch = kzalloc(l, GFP_KERNEL);
+ if (!scratch)
+ return -ENOMEM;
+
+ /* OUT: OP_READ_SECURITY, 3 don't-care bytes, zeroes
+ * IN: ignore 4 bytes, data bytes 0..N (max 127)
+ */
+ scratch[0] = OP_READ_SECURITY;
+
+ memset(&t, 0, sizeof t);
+ t.tx_buf = scratch;
+ t.rx_buf = scratch;
+ t.len = l;
+ spi_message_add_tail(&t, &m);
+
+ dataflash_waitready(spi);
+
+ status = spi_sync(spi, &m);
+ if (status >= 0) {
+ memcpy(buf, scratch + 4 + base + off, len);
+ status = len;
+ }
+
+ kfree(scratch);
+ return status;
+}
+
+static int dataflash_read_fact_otp(struct mtd_info *mtd,
+ loff_t from, size_t len, size_t *retlen, u_char *buf)
+{
+ struct dataflash *priv = mtd->priv;
+ int status;
+
+ /* 64 bytes, from 0..63 ... start at 64 on-chip */
+ mutex_lock(&priv->lock);
+ status = otp_read(priv->spi, 64, buf, from, len);
+ mutex_unlock(&priv->lock);
+
+ if (status < 0)
+ return status;
+ *retlen = status;
+ return 0;
+}
+
+static int dataflash_read_user_otp(struct mtd_info *mtd,
+ loff_t from, size_t len, size_t *retlen, u_char *buf)
+{
+ struct dataflash *priv = mtd->priv;
+ int status;
+
+ /* 64 bytes, from 0..63 ... start at 0 on-chip */
+ mutex_lock(&priv->lock);
+ status = otp_read(priv->spi, 0, buf, from, len);
+ mutex_unlock(&priv->lock);
+
+ if (status < 0)
+ return status;
+ *retlen = status;
+ return 0;
+}
+
+static int dataflash_write_user_otp(struct mtd_info *mtd,
+ loff_t from, size_t len, size_t *retlen, u_char *buf)
+{
+ struct spi_message m;
+ const size_t l = 4 + 64;
+ uint8_t *scratch;
+ struct spi_transfer t;
+ struct dataflash *priv = mtd->priv;
+ int status;
+
+ if (from >= 64) {
+ /*
+ * Attempting to write beyond the end of OTP memory,
+ * no data can be written.
+ */
+ *retlen = 0;
+ return 0;
+ }
+
+ /* Truncate the write to fit into OTP memory. */
+ if ((from + len) > 64)
+ len = 64 - from;
+
+ /* OUT: OP_WRITE_SECURITY, 3 zeroes, 64 data-or-zero bytes
+ * IN: ignore all
+ */
+ scratch = kzalloc(l, GFP_KERNEL);
+ if (!scratch)
+ return -ENOMEM;
+ scratch[0] = OP_WRITE_SECURITY;
+ memcpy(scratch + 4 + from, buf, len);
+
+ spi_message_init(&m);
+
+ memset(&t, 0, sizeof t);
+ t.tx_buf = scratch;
+ t.len = l;
+ spi_message_add_tail(&t, &m);
+
+ /* Write the OTP bits, if they've not yet been written.
+ * This modifies SRAM buffer1.
+ */
+ mutex_lock(&priv->lock);
+ dataflash_waitready(priv->spi);
+ status = spi_sync(priv->spi, &m);
+ mutex_unlock(&priv->lock);
+
+ kfree(scratch);
+
+ if (status >= 0) {
+ status = 0;
+ *retlen = len;
+ }
+ return status;
+}
+
+static char *otp_setup(struct mtd_info *device, char revision)
+{
+ device->_get_fact_prot_info = dataflash_get_otp_info;
+ device->_read_fact_prot_reg = dataflash_read_fact_otp;
+ device->_get_user_prot_info = dataflash_get_otp_info;
+ device->_read_user_prot_reg = dataflash_read_user_otp;
+
+ /* rev c parts (at45db321c and at45db1281 only!) use a
+ * different write procedure; not (yet?) implemented.
+ */
+ if (revision > 'c')
+ device->_write_user_prot_reg = dataflash_write_user_otp;
+
+ return ", OTP";
+}
+
+#else
+
+static char *otp_setup(struct mtd_info *device, char revision)
+{
+ return " (OTP)";
+}
+
+#endif
+
+/* ......................................................................... */
+
+/*
+ * Register DataFlash device with MTD subsystem.
+ */
+static int add_dataflash_otp(struct spi_device *spi, char *name, int nr_pages,
+ int pagesize, int pageoffset, char revision)
+{
+ struct dataflash *priv;
+ struct mtd_info *device;
+ struct mtd_part_parser_data ppdata;
+ struct flash_platform_data *pdata = dev_get_platdata(&spi->dev);
+ char *otp_tag = "";
+ int err = 0;
+
+ priv = kzalloc(sizeof *priv, GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ mutex_init(&priv->lock);
+ priv->spi = spi;
+ priv->page_size = pagesize;
+ priv->page_offset = pageoffset;
+
+ /* name must be usable with cmdlinepart */
+ sprintf(priv->name, "spi%d.%d-%s",
+ spi->master->bus_num, spi->chip_select,
+ name);
+
+ device = &priv->mtd;
+ device->name = (pdata && pdata->name) ? pdata->name : priv->name;
+ device->size = nr_pages * pagesize;
+ device->erasesize = pagesize;
+ device->writesize = pagesize;
+ device->owner = THIS_MODULE;
+ device->type = MTD_DATAFLASH;
+ device->flags = MTD_WRITEABLE;
+ device->_erase = dataflash_erase;
+ device->_read = dataflash_read;
+ device->_write = dataflash_write;
+ device->priv = priv;
+
+ device->dev.parent = &spi->dev;
+
+ if (revision >= 'c')
+ otp_tag = otp_setup(device, revision);
+
+ dev_info(&spi->dev, "%s (%lld KBytes) pagesize %d bytes%s\n",
+ name, (long long)((device->size + 1023) >> 10),
+ pagesize, otp_tag);
+ spi_set_drvdata(spi, priv);
+
+ ppdata.of_node = spi->dev.of_node;
+ err = mtd_device_parse_register(device, NULL, &ppdata,
+ pdata ? pdata->parts : NULL,
+ pdata ? pdata->nr_parts : 0);
+
+ if (!err)
+ return 0;
+
+ kfree(priv);
+ return err;
+}
+
+static inline int add_dataflash(struct spi_device *spi, char *name,
+ int nr_pages, int pagesize, int pageoffset)
+{
+ return add_dataflash_otp(spi, name, nr_pages, pagesize,
+ pageoffset, 0);
+}
+
+struct flash_info {
+ char *name;
+
+ /* JEDEC id has a high byte of zero plus three data bytes:
+ * the manufacturer id, then a two byte device id.
+ */
+ uint32_t jedec_id;
+
+ /* The size listed here is what works with OP_ERASE_PAGE. */
+ unsigned nr_pages;
+ uint16_t pagesize;
+ uint16_t pageoffset;
+
+ uint16_t flags;
+#define SUP_POW2PS 0x0002 /* supports 2^N byte pages */
+#define IS_POW2PS 0x0001 /* uses 2^N byte pages */
+};
+
+static struct flash_info dataflash_data[] = {
+
+ /*
+ * NOTE: chips with SUP_POW2PS (rev D and up) need two entries,
+ * one with IS_POW2PS and the other without. The entry with the
+ * non-2^N byte page size can't name exact chip revisions without
+ * losing backwards compatibility for cmdlinepart.
+ *
+ * These newer chips also support 128-byte security registers (with
+ * 64 bytes one-time-programmable) and software write-protection.
+ */
+ { "AT45DB011B", 0x1f2200, 512, 264, 9, SUP_POW2PS},
+ { "at45db011d", 0x1f2200, 512, 256, 8, SUP_POW2PS | IS_POW2PS},
+
+ { "AT45DB021B", 0x1f2300, 1024, 264, 9, SUP_POW2PS},
+ { "at45db021d", 0x1f2300, 1024, 256, 8, SUP_POW2PS | IS_POW2PS},
+
+ { "AT45DB041x", 0x1f2400, 2048, 264, 9, SUP_POW2PS},
+ { "at45db041d", 0x1f2400, 2048, 256, 8, SUP_POW2PS | IS_POW2PS},
+
+ { "AT45DB081B", 0x1f2500, 4096, 264, 9, SUP_POW2PS},
+ { "at45db081d", 0x1f2500, 4096, 256, 8, SUP_POW2PS | IS_POW2PS},
+
+ { "AT45DB161x", 0x1f2600, 4096, 528, 10, SUP_POW2PS},
+ { "at45db161d", 0x1f2600, 4096, 512, 9, SUP_POW2PS | IS_POW2PS},
+
+ { "AT45DB321x", 0x1f2700, 8192, 528, 10, 0}, /* rev C */
+
+ { "AT45DB321x", 0x1f2701, 8192, 528, 10, SUP_POW2PS},
+ { "at45db321d", 0x1f2701, 8192, 512, 9, SUP_POW2PS | IS_POW2PS},
+
+ { "AT45DB642x", 0x1f2800, 8192, 1056, 11, SUP_POW2PS},
+ { "at45db642d", 0x1f2800, 8192, 1024, 10, SUP_POW2PS | IS_POW2PS},
+};
+
+static struct flash_info *jedec_probe(struct spi_device *spi)
+{
+ int tmp;
+ uint8_t code = OP_READ_ID;
+ uint8_t id[3];
+ uint32_t jedec;
+ struct flash_info *info;
+ int status;
+
+ /* JEDEC also defines an optional "extended device information"
+ * string for after vendor-specific data, after the three bytes
+ * we use here. Supporting some chips might require using it.
+ *
+ * If the vendor ID isn't Atmel's (0x1f), assume this call failed.
+ * That's not an error; only rev C and newer chips handle it, and
+ * only Atmel sells these chips.
+ */
+ tmp = spi_write_then_read(spi, &code, 1, id, 3);
+ if (tmp < 0) {
+ pr_debug("%s: error %d reading JEDEC ID\n",
+ dev_name(&spi->dev), tmp);
+ return ERR_PTR(tmp);
+ }
+ if (id[0] != 0x1f)
+ return NULL;
+
+ jedec = id[0];
+ jedec = jedec << 8;
+ jedec |= id[1];
+ jedec = jedec << 8;
+ jedec |= id[2];
+
+ for (tmp = 0, info = dataflash_data;
+ tmp < ARRAY_SIZE(dataflash_data);
+ tmp++, info++) {
+ if (info->jedec_id == jedec) {
+ pr_debug("%s: OTP, sector protect%s\n",
+ dev_name(&spi->dev),
+ (info->flags & SUP_POW2PS)
+ ? ", binary pagesize" : ""
+ );
+ if (info->flags & SUP_POW2PS) {
+ status = dataflash_status(spi);
+ if (status < 0) {
+ pr_debug("%s: status error %d\n",
+ dev_name(&spi->dev), status);
+ return ERR_PTR(status);
+ }
+ if (status & 0x1) {
+ if (info->flags & IS_POW2PS)
+ return info;
+ } else {
+ if (!(info->flags & IS_POW2PS))
+ return info;
+ }
+ } else
+ return info;
+ }
+ }
+
+ /*
+ * Treat other chips as errors ... we won't know the right page
+ * size (it might be binary) even when we can tell which density
+ * class is involved (legacy chip id scheme).
+ */
+ dev_warn(&spi->dev, "JEDEC id %06x not handled\n", jedec);
+ return ERR_PTR(-ENODEV);
+}
+
+/*
+ * Detect and initialize DataFlash device, using JEDEC IDs on newer chips
+ * or else the ID code embedded in the status bits:
+ *
+ * Device Density ID code #Pages PageSize Offset
+ * AT45DB011B 1Mbit (128K) xx0011xx (0x0c) 512 264 9
+ * AT45DB021B 2Mbit (256K) xx0101xx (0x14) 1024 264 9
+ * AT45DB041B 4Mbit (512K) xx0111xx (0x1c) 2048 264 9
+ * AT45DB081B 8Mbit (1M) xx1001xx (0x24) 4096 264 9
+ * AT45DB0161B 16Mbit (2M) xx1011xx (0x2c) 4096 528 10
+ * AT45DB0321B 32Mbit (4M) xx1101xx (0x34) 8192 528 10
+ * AT45DB0642 64Mbit (8M) xx111xxx (0x3c) 8192 1056 11
+ * AT45DB1282 128Mbit (16M) xx0100xx (0x10) 16384 1056 11
+ */
+static int dataflash_probe(struct spi_device *spi)
+{
+ int status;
+ struct flash_info *info;
+
+ /*
+ * Try to detect dataflash by JEDEC ID.
+ * If it succeeds we know we have either a C or D part.
+ * D will support power of 2 pagesize option.
+ * Both support the security register, though with different
+ * write procedures.
+ */
+ info = jedec_probe(spi);
+ if (IS_ERR(info))
+ return PTR_ERR(info);
+ if (info != NULL)
+ return add_dataflash_otp(spi, info->name, info->nr_pages,
+ info->pagesize, info->pageoffset,
+ (info->flags & SUP_POW2PS) ? 'd' : 'c');
+
+ /*
+ * Older chips support only legacy commands, identifing
+ * capacity using bits in the status byte.
+ */
+ status = dataflash_status(spi);
+ if (status <= 0 || status == 0xff) {
+ pr_debug("%s: status error %d\n",
+ dev_name(&spi->dev), status);
+ if (status == 0 || status == 0xff)
+ status = -ENODEV;
+ return status;
+ }
+
+ /* if there's a device there, assume it's dataflash.
+ * board setup should have set spi->max_speed_max to
+ * match f(car) for continuous reads, mode 0 or 3.
+ */
+ switch (status & 0x3c) {
+ case 0x0c: /* 0 0 1 1 x x */
+ status = add_dataflash(spi, "AT45DB011B", 512, 264, 9);
+ break;
+ case 0x14: /* 0 1 0 1 x x */
+ status = add_dataflash(spi, "AT45DB021B", 1024, 264, 9);
+ break;
+ case 0x1c: /* 0 1 1 1 x x */
+ status = add_dataflash(spi, "AT45DB041x", 2048, 264, 9);
+ break;
+ case 0x24: /* 1 0 0 1 x x */
+ status = add_dataflash(spi, "AT45DB081B", 4096, 264, 9);
+ break;
+ case 0x2c: /* 1 0 1 1 x x */
+ status = add_dataflash(spi, "AT45DB161x", 4096, 528, 10);
+ break;
+ case 0x34: /* 1 1 0 1 x x */
+ status = add_dataflash(spi, "AT45DB321x", 8192, 528, 10);
+ break;
+ case 0x38: /* 1 1 1 x x x */
+ case 0x3c:
+ status = add_dataflash(spi, "AT45DB642x", 8192, 1056, 11);
+ break;
+ /* obsolete AT45DB1282 not (yet?) supported */
+ default:
+ dev_info(&spi->dev, "unsupported device (%x)\n",
+ status & 0x3c);
+ status = -ENODEV;
+ }
+
+ if (status < 0)
+ pr_debug("%s: add_dataflash --> %d\n", dev_name(&spi->dev),
+ status);
+
+ return status;
+}
+
+static int dataflash_remove(struct spi_device *spi)
+{
+ struct dataflash *flash = spi_get_drvdata(spi);
+ int status;
+
+ pr_debug("%s: remove\n", dev_name(&spi->dev));
+
+ status = mtd_device_unregister(&flash->mtd);
+ if (status == 0)
+ kfree(flash);
+ return status;
+}
+
+static struct spi_driver dataflash_driver = {
+ .driver = {
+ .name = "mtd_dataflash",
+ .owner = THIS_MODULE,
+ .of_match_table = of_match_ptr(dataflash_dt_ids),
+ },
+
+ .probe = dataflash_probe,
+ .remove = dataflash_remove,
+
+ /* FIXME: investigate suspend and resume... */
+};
+
+module_spi_driver(dataflash_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Andrew Victor, David Brownell");
+MODULE_DESCRIPTION("MTD DataFlash driver");
+MODULE_ALIAS("spi:mtd_dataflash");
diff --git a/kernel/drivers/mtd/devices/mtdram.c b/kernel/drivers/mtd/devices/mtdram.c
new file mode 100644
index 000000000..8e2850892
--- /dev/null
+++ b/kernel/drivers/mtd/devices/mtdram.c
@@ -0,0 +1,158 @@
+/*
+ * mtdram - a test mtd device
+ * Author: Alexander Larsson <alex@cendio.se>
+ *
+ * Copyright (c) 1999 Alexander Larsson <alex@cendio.se>
+ * Copyright (c) 2005 Joern Engel <joern@wh.fh-wedel.de>
+ *
+ * This code is GPL
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/ioport.h>
+#include <linux/vmalloc.h>
+#include <linux/init.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/mtdram.h>
+
+static unsigned long total_size = CONFIG_MTDRAM_TOTAL_SIZE;
+static unsigned long erase_size = CONFIG_MTDRAM_ERASE_SIZE;
+#define MTDRAM_TOTAL_SIZE (total_size * 1024)
+#define MTDRAM_ERASE_SIZE (erase_size * 1024)
+
+#ifdef MODULE
+module_param(total_size, ulong, 0);
+MODULE_PARM_DESC(total_size, "Total device size in KiB");
+module_param(erase_size, ulong, 0);
+MODULE_PARM_DESC(erase_size, "Device erase block size in KiB");
+#endif
+
+// We could store these in the mtd structure, but we only support 1 device..
+static struct mtd_info *mtd_info;
+
+static int ram_erase(struct mtd_info *mtd, struct erase_info *instr)
+{
+ memset((char *)mtd->priv + instr->addr, 0xff, instr->len);
+ instr->state = MTD_ERASE_DONE;
+ mtd_erase_callback(instr);
+ return 0;
+}
+
+static int ram_point(struct mtd_info *mtd, loff_t from, size_t len,
+ size_t *retlen, void **virt, resource_size_t *phys)
+{
+ *virt = mtd->priv + from;
+ *retlen = len;
+ return 0;
+}
+
+static int ram_unpoint(struct mtd_info *mtd, loff_t from, size_t len)
+{
+ return 0;
+}
+
+/*
+ * Allow NOMMU mmap() to directly map the device (if not NULL)
+ * - return the address to which the offset maps
+ * - return -ENOSYS to indicate refusal to do the mapping
+ */
+static unsigned long ram_get_unmapped_area(struct mtd_info *mtd,
+ unsigned long len,
+ unsigned long offset,
+ unsigned long flags)
+{
+ return (unsigned long) mtd->priv + offset;
+}
+
+static int ram_read(struct mtd_info *mtd, loff_t from, size_t len,
+ size_t *retlen, u_char *buf)
+{
+ memcpy(buf, mtd->priv + from, len);
+ *retlen = len;
+ return 0;
+}
+
+static int ram_write(struct mtd_info *mtd, loff_t to, size_t len,
+ size_t *retlen, const u_char *buf)
+{
+ memcpy((char *)mtd->priv + to, buf, len);
+ *retlen = len;
+ return 0;
+}
+
+static void __exit cleanup_mtdram(void)
+{
+ if (mtd_info) {
+ mtd_device_unregister(mtd_info);
+ vfree(mtd_info->priv);
+ kfree(mtd_info);
+ }
+}
+
+int mtdram_init_device(struct mtd_info *mtd, void *mapped_address,
+ unsigned long size, const char *name)
+{
+ memset(mtd, 0, sizeof(*mtd));
+
+ /* Setup the MTD structure */
+ mtd->name = name;
+ mtd->type = MTD_RAM;
+ mtd->flags = MTD_CAP_RAM;
+ mtd->size = size;
+ mtd->writesize = 1;
+ mtd->writebufsize = 64; /* Mimic CFI NOR flashes */
+ mtd->erasesize = MTDRAM_ERASE_SIZE;
+ mtd->priv = mapped_address;
+
+ mtd->owner = THIS_MODULE;
+ mtd->_erase = ram_erase;
+ mtd->_point = ram_point;
+ mtd->_unpoint = ram_unpoint;
+ mtd->_get_unmapped_area = ram_get_unmapped_area;
+ mtd->_read = ram_read;
+ mtd->_write = ram_write;
+
+ if (mtd_device_register(mtd, NULL, 0))
+ return -EIO;
+
+ return 0;
+}
+
+static int __init init_mtdram(void)
+{
+ void *addr;
+ int err;
+
+ if (!total_size)
+ return -EINVAL;
+
+ /* Allocate some memory */
+ mtd_info = kmalloc(sizeof(struct mtd_info), GFP_KERNEL);
+ if (!mtd_info)
+ return -ENOMEM;
+
+ addr = vmalloc(MTDRAM_TOTAL_SIZE);
+ if (!addr) {
+ kfree(mtd_info);
+ mtd_info = NULL;
+ return -ENOMEM;
+ }
+ err = mtdram_init_device(mtd_info, addr, MTDRAM_TOTAL_SIZE, "mtdram test device");
+ if (err) {
+ vfree(addr);
+ kfree(mtd_info);
+ mtd_info = NULL;
+ return err;
+ }
+ memset(mtd_info->priv, 0xff, MTDRAM_TOTAL_SIZE);
+ return err;
+}
+
+module_init(init_mtdram);
+module_exit(cleanup_mtdram);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Alexander Larsson <alexl@redhat.com>");
+MODULE_DESCRIPTION("Simulated MTD driver for testing");
diff --git a/kernel/drivers/mtd/devices/phram.c b/kernel/drivers/mtd/devices/phram.c
new file mode 100644
index 000000000..8b66e52ca
--- /dev/null
+++ b/kernel/drivers/mtd/devices/phram.c
@@ -0,0 +1,328 @@
+/**
+ * Copyright (c) ???? Jochen Schäuble <psionic@psionic.de>
+ * Copyright (c) 2003-2004 Joern Engel <joern@wh.fh-wedel.de>
+ *
+ * Usage:
+ *
+ * one commend line parameter per device, each in the form:
+ * phram=<name>,<start>,<len>
+ * <name> may be up to 63 characters.
+ * <start> and <len> can be octal, decimal or hexadecimal. If followed
+ * by "ki", "Mi" or "Gi", the numbers will be interpreted as kilo, mega or
+ * gigabytes.
+ *
+ * Example:
+ * phram=swap,64Mi,128Mi phram=test,900Mi,1Mi
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/io.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/slab.h>
+#include <linux/mtd/mtd.h>
+
+struct phram_mtd_list {
+ struct mtd_info mtd;
+ struct list_head list;
+};
+
+static LIST_HEAD(phram_list);
+
+static int phram_erase(struct mtd_info *mtd, struct erase_info *instr)
+{
+ u_char *start = mtd->priv;
+
+ memset(start + instr->addr, 0xff, instr->len);
+
+ /*
+ * This'll catch a few races. Free the thing before returning :)
+ * I don't feel at all ashamed. This kind of thing is possible anyway
+ * with flash, but unlikely.
+ */
+ instr->state = MTD_ERASE_DONE;
+ mtd_erase_callback(instr);
+ return 0;
+}
+
+static int phram_point(struct mtd_info *mtd, loff_t from, size_t len,
+ size_t *retlen, void **virt, resource_size_t *phys)
+{
+ *virt = mtd->priv + from;
+ *retlen = len;
+ return 0;
+}
+
+static int phram_unpoint(struct mtd_info *mtd, loff_t from, size_t len)
+{
+ return 0;
+}
+
+static int phram_read(struct mtd_info *mtd, loff_t from, size_t len,
+ size_t *retlen, u_char *buf)
+{
+ u_char *start = mtd->priv;
+
+ memcpy(buf, start + from, len);
+ *retlen = len;
+ return 0;
+}
+
+static int phram_write(struct mtd_info *mtd, loff_t to, size_t len,
+ size_t *retlen, const u_char *buf)
+{
+ u_char *start = mtd->priv;
+
+ memcpy(start + to, buf, len);
+ *retlen = len;
+ return 0;
+}
+
+static void unregister_devices(void)
+{
+ struct phram_mtd_list *this, *safe;
+
+ list_for_each_entry_safe(this, safe, &phram_list, list) {
+ mtd_device_unregister(&this->mtd);
+ iounmap(this->mtd.priv);
+ kfree(this->mtd.name);
+ kfree(this);
+ }
+}
+
+static int register_device(char *name, phys_addr_t start, size_t len)
+{
+ struct phram_mtd_list *new;
+ int ret = -ENOMEM;
+
+ new = kzalloc(sizeof(*new), GFP_KERNEL);
+ if (!new)
+ goto out0;
+
+ ret = -EIO;
+ new->mtd.priv = ioremap(start, len);
+ if (!new->mtd.priv) {
+ pr_err("ioremap failed\n");
+ goto out1;
+ }
+
+
+ new->mtd.name = name;
+ new->mtd.size = len;
+ new->mtd.flags = MTD_CAP_RAM;
+ new->mtd._erase = phram_erase;
+ new->mtd._point = phram_point;
+ new->mtd._unpoint = phram_unpoint;
+ new->mtd._read = phram_read;
+ new->mtd._write = phram_write;
+ new->mtd.owner = THIS_MODULE;
+ new->mtd.type = MTD_RAM;
+ new->mtd.erasesize = PAGE_SIZE;
+ new->mtd.writesize = 1;
+
+ ret = -EAGAIN;
+ if (mtd_device_register(&new->mtd, NULL, 0)) {
+ pr_err("Failed to register new device\n");
+ goto out2;
+ }
+
+ list_add_tail(&new->list, &phram_list);
+ return 0;
+
+out2:
+ iounmap(new->mtd.priv);
+out1:
+ kfree(new);
+out0:
+ return ret;
+}
+
+static int parse_num64(uint64_t *num64, char *token)
+{
+ size_t len;
+ int shift = 0;
+ int ret;
+
+ len = strlen(token);
+ /* By dwmw2 editorial decree, "ki", "Mi" or "Gi" are to be used. */
+ if (len > 2) {
+ if (token[len - 1] == 'i') {
+ switch (token[len - 2]) {
+ case 'G':
+ shift += 10;
+ case 'M':
+ shift += 10;
+ case 'k':
+ shift += 10;
+ token[len - 2] = 0;
+ break;
+ default:
+ return -EINVAL;
+ }
+ }
+ }
+
+ ret = kstrtou64(token, 0, num64);
+ *num64 <<= shift;
+
+ return ret;
+}
+
+static int parse_name(char **pname, const char *token)
+{
+ size_t len;
+ char *name;
+
+ len = strlen(token) + 1;
+ if (len > 64)
+ return -ENOSPC;
+
+ name = kstrdup(token, GFP_KERNEL);
+ if (!name)
+ return -ENOMEM;
+
+ *pname = name;
+ return 0;
+}
+
+
+static inline void kill_final_newline(char *str)
+{
+ char *newline = strrchr(str, '\n');
+
+ if (newline && !newline[1])
+ *newline = 0;
+}
+
+
+#define parse_err(fmt, args...) do { \
+ pr_err(fmt , ## args); \
+ return 1; \
+} while (0)
+
+#ifndef MODULE
+static int phram_init_called;
+/*
+ * This shall contain the module parameter if any. It is of the form:
+ * - phram=<device>,<address>,<size> for module case
+ * - phram.phram=<device>,<address>,<size> for built-in case
+ * We leave 64 bytes for the device name, 20 for the address and 20 for the
+ * size.
+ * Example: phram.phram=rootfs,0xa0000000,512Mi
+ */
+static char phram_paramline[64 + 20 + 20];
+#endif
+
+static int phram_setup(const char *val)
+{
+ char buf[64 + 20 + 20], *str = buf;
+ char *token[3];
+ char *name;
+ uint64_t start;
+ uint64_t len;
+ int i, ret;
+
+ if (strnlen(val, sizeof(buf)) >= sizeof(buf))
+ parse_err("parameter too long\n");
+
+ strcpy(str, val);
+ kill_final_newline(str);
+
+ for (i = 0; i < 3; i++)
+ token[i] = strsep(&str, ",");
+
+ if (str)
+ parse_err("too many arguments\n");
+
+ if (!token[2])
+ parse_err("not enough arguments\n");
+
+ ret = parse_name(&name, token[0]);
+ if (ret)
+ return ret;
+
+ ret = parse_num64(&start, token[1]);
+ if (ret) {
+ kfree(name);
+ parse_err("illegal start address\n");
+ }
+
+ ret = parse_num64(&len, token[2]);
+ if (ret) {
+ kfree(name);
+ parse_err("illegal device length\n");
+ }
+
+ ret = register_device(name, start, len);
+ if (!ret)
+ pr_info("%s device: %#llx at %#llx\n", name, len, start);
+ else
+ kfree(name);
+
+ return ret;
+}
+
+static int phram_param_call(const char *val, struct kernel_param *kp)
+{
+#ifdef MODULE
+ return phram_setup(val);
+#else
+ /*
+ * If more parameters are later passed in via
+ * /sys/module/phram/parameters/phram
+ * and init_phram() has already been called,
+ * we can parse the argument now.
+ */
+
+ if (phram_init_called)
+ return phram_setup(val);
+
+ /*
+ * During early boot stage, we only save the parameters
+ * here. We must parse them later: if the param passed
+ * from kernel boot command line, phram_param_call() is
+ * called so early that it is not possible to resolve
+ * the device (even kmalloc() fails). Defer that work to
+ * phram_setup().
+ */
+
+ if (strlen(val) >= sizeof(phram_paramline))
+ return -ENOSPC;
+ strcpy(phram_paramline, val);
+
+ return 0;
+#endif
+}
+
+module_param_call(phram, phram_param_call, NULL, NULL, 000);
+MODULE_PARM_DESC(phram, "Memory region to map. \"phram=<name>,<start>,<length>\"");
+
+
+static int __init init_phram(void)
+{
+ int ret = 0;
+
+#ifndef MODULE
+ if (phram_paramline[0])
+ ret = phram_setup(phram_paramline);
+ phram_init_called = 1;
+#endif
+
+ return ret;
+}
+
+static void __exit cleanup_phram(void)
+{
+ unregister_devices();
+}
+
+module_init(init_phram);
+module_exit(cleanup_phram);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Joern Engel <joern@wh.fh-wedel.de>");
+MODULE_DESCRIPTION("MTD driver for physical RAM");
diff --git a/kernel/drivers/mtd/devices/pmc551.c b/kernel/drivers/mtd/devices/pmc551.c
new file mode 100644
index 000000000..708b7e8c8
--- /dev/null
+++ b/kernel/drivers/mtd/devices/pmc551.c
@@ -0,0 +1,856 @@
+/*
+ * PMC551 PCI Mezzanine Ram Device
+ *
+ * Author:
+ * Mark Ferrell <mferrell@mvista.com>
+ * Copyright 1999,2000 Nortel Networks
+ *
+ * License:
+ * As part of this driver was derived from the slram.c driver it
+ * falls under the same license, which is GNU General Public
+ * License v2
+ *
+ * Description:
+ * This driver is intended to support the PMC551 PCI Ram device
+ * from Ramix Inc. The PMC551 is a PMC Mezzanine module for
+ * cPCI embedded systems. The device contains a single SROM
+ * that initially programs the V370PDC chipset onboard the
+ * device, and various banks of DRAM/SDRAM onboard. This driver
+ * implements this PCI Ram device as an MTD (Memory Technology
+ * Device) so that it can be used to hold a file system, or for
+ * added swap space in embedded systems. Since the memory on
+ * this board isn't as fast as main memory we do not try to hook
+ * it into main memory as that would simply reduce performance
+ * on the system. Using it as a block device allows us to use
+ * it as high speed swap or for a high speed disk device of some
+ * sort. Which becomes very useful on diskless systems in the
+ * embedded market I might add.
+ *
+ * Notes:
+ * Due to what I assume is more buggy SROM, the 64M PMC551 I
+ * have available claims that all 4 of its DRAM banks have 64MiB
+ * of ram configured (making a grand total of 256MiB onboard).
+ * This is slightly annoying since the BAR0 size reflects the
+ * aperture size, not the dram size, and the V370PDC supplies no
+ * other method for memory size discovery. This problem is
+ * mostly only relevant when compiled as a module, as the
+ * unloading of the module with an aperture size smaller than
+ * the ram will cause the driver to detect the onboard memory
+ * size to be equal to the aperture size when the module is
+ * reloaded. Soooo, to help, the module supports an msize
+ * option to allow the specification of the onboard memory, and
+ * an asize option, to allow the specification of the aperture
+ * size. The aperture must be equal to or less then the memory
+ * size, the driver will correct this if you screw it up. This
+ * problem is not relevant for compiled in drivers as compiled
+ * in drivers only init once.
+ *
+ * Credits:
+ * Saeed Karamooz <saeed@ramix.com> of Ramix INC. for the
+ * initial example code of how to initialize this device and for
+ * help with questions I had concerning operation of the device.
+ *
+ * Most of the MTD code for this driver was originally written
+ * for the slram.o module in the MTD drivers package which
+ * allows the mapping of system memory into an MTD device.
+ * Since the PMC551 memory module is accessed in the same
+ * fashion as system memory, the slram.c code became a very nice
+ * fit to the needs of this driver. All we added was PCI
+ * detection/initialization to the driver and automatically figure
+ * out the size via the PCI detection.o, later changes by Corey
+ * Minyard set up the card to utilize a 1M sliding apature.
+ *
+ * Corey Minyard <minyard@nortelnetworks.com>
+ * * Modified driver to utilize a sliding aperture instead of
+ * mapping all memory into kernel space which turned out to
+ * be very wasteful.
+ * * Located a bug in the SROM's initialization sequence that
+ * made the memory unusable, added a fix to code to touch up
+ * the DRAM some.
+ *
+ * Bugs/FIXMEs:
+ * * MUST fix the init function to not spin on a register
+ * waiting for it to set .. this does not safely handle busted
+ * devices that never reset the register correctly which will
+ * cause the system to hang w/ a reboot being the only chance at
+ * recover. [sort of fixed, could be better]
+ * * Add I2C handling of the SROM so we can read the SROM's information
+ * about the aperture size. This should always accurately reflect the
+ * onboard memory size.
+ * * Comb the init routine. It's still a bit cludgy on a few things.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <asm/uaccess.h>
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/ptrace.h>
+#include <linux/slab.h>
+#include <linux/string.h>
+#include <linux/timer.h>
+#include <linux/major.h>
+#include <linux/fs.h>
+#include <linux/ioctl.h>
+#include <asm/io.h>
+#include <linux/pci.h>
+#include <linux/mtd/mtd.h>
+
+#define PMC551_VERSION \
+ "Ramix PMC551 PCI Mezzanine Ram Driver. (C) 1999,2000 Nortel Networks.\n"
+
+#define PCI_VENDOR_ID_V3_SEMI 0x11b0
+#define PCI_DEVICE_ID_V3_SEMI_V370PDC 0x0200
+
+#define PMC551_PCI_MEM_MAP0 0x50
+#define PMC551_PCI_MEM_MAP1 0x54
+#define PMC551_PCI_MEM_MAP_MAP_ADDR_MASK 0x3ff00000
+#define PMC551_PCI_MEM_MAP_APERTURE_MASK 0x000000f0
+#define PMC551_PCI_MEM_MAP_REG_EN 0x00000002
+#define PMC551_PCI_MEM_MAP_ENABLE 0x00000001
+
+#define PMC551_SDRAM_MA 0x60
+#define PMC551_SDRAM_CMD 0x62
+#define PMC551_DRAM_CFG 0x64
+#define PMC551_SYS_CTRL_REG 0x78
+
+#define PMC551_DRAM_BLK0 0x68
+#define PMC551_DRAM_BLK1 0x6c
+#define PMC551_DRAM_BLK2 0x70
+#define PMC551_DRAM_BLK3 0x74
+#define PMC551_DRAM_BLK_GET_SIZE(x) (524288 << ((x >> 4) & 0x0f))
+#define PMC551_DRAM_BLK_SET_COL_MUX(x, v) (((x) & ~0x00007000) | (((v) & 0x7) << 12))
+#define PMC551_DRAM_BLK_SET_ROW_MUX(x, v) (((x) & ~0x00000f00) | (((v) & 0xf) << 8))
+
+struct mypriv {
+ struct pci_dev *dev;
+ u_char *start;
+ u32 base_map0;
+ u32 curr_map0;
+ u32 asize;
+ struct mtd_info *nextpmc551;
+};
+
+static struct mtd_info *pmc551list;
+
+static int pmc551_point(struct mtd_info *mtd, loff_t from, size_t len,
+ size_t *retlen, void **virt, resource_size_t *phys);
+
+static int pmc551_erase(struct mtd_info *mtd, struct erase_info *instr)
+{
+ struct mypriv *priv = mtd->priv;
+ u32 soff_hi, soff_lo; /* start address offset hi/lo */
+ u32 eoff_hi, eoff_lo; /* end address offset hi/lo */
+ unsigned long end;
+ u_char *ptr;
+ size_t retlen;
+
+#ifdef CONFIG_MTD_PMC551_DEBUG
+ printk(KERN_DEBUG "pmc551_erase(pos:%ld, len:%ld)\n", (long)instr->addr,
+ (long)instr->len);
+#endif
+
+ end = instr->addr + instr->len - 1;
+ eoff_hi = end & ~(priv->asize - 1);
+ soff_hi = instr->addr & ~(priv->asize - 1);
+ eoff_lo = end & (priv->asize - 1);
+ soff_lo = instr->addr & (priv->asize - 1);
+
+ pmc551_point(mtd, instr->addr, instr->len, &retlen,
+ (void **)&ptr, NULL);
+
+ if (soff_hi == eoff_hi || mtd->size == priv->asize) {
+ /* The whole thing fits within one access, so just one shot
+ will do it. */
+ memset(ptr, 0xff, instr->len);
+ } else {
+ /* We have to do multiple writes to get all the data
+ written. */
+ while (soff_hi != eoff_hi) {
+#ifdef CONFIG_MTD_PMC551_DEBUG
+ printk(KERN_DEBUG "pmc551_erase() soff_hi: %ld, "
+ "eoff_hi: %ld\n", (long)soff_hi, (long)eoff_hi);
+#endif
+ memset(ptr, 0xff, priv->asize);
+ if (soff_hi + priv->asize >= mtd->size) {
+ goto out;
+ }
+ soff_hi += priv->asize;
+ pmc551_point(mtd, (priv->base_map0 | soff_hi),
+ priv->asize, &retlen,
+ (void **)&ptr, NULL);
+ }
+ memset(ptr, 0xff, eoff_lo);
+ }
+
+ out:
+ instr->state = MTD_ERASE_DONE;
+#ifdef CONFIG_MTD_PMC551_DEBUG
+ printk(KERN_DEBUG "pmc551_erase() done\n");
+#endif
+
+ mtd_erase_callback(instr);
+ return 0;
+}
+
+static int pmc551_point(struct mtd_info *mtd, loff_t from, size_t len,
+ size_t *retlen, void **virt, resource_size_t *phys)
+{
+ struct mypriv *priv = mtd->priv;
+ u32 soff_hi;
+ u32 soff_lo;
+
+#ifdef CONFIG_MTD_PMC551_DEBUG
+ printk(KERN_DEBUG "pmc551_point(%ld, %ld)\n", (long)from, (long)len);
+#endif
+
+ soff_hi = from & ~(priv->asize - 1);
+ soff_lo = from & (priv->asize - 1);
+
+ /* Cheap hack optimization */
+ if (priv->curr_map0 != from) {
+ pci_write_config_dword(priv->dev, PMC551_PCI_MEM_MAP0,
+ (priv->base_map0 | soff_hi));
+ priv->curr_map0 = soff_hi;
+ }
+
+ *virt = priv->start + soff_lo;
+ *retlen = len;
+ return 0;
+}
+
+static int pmc551_unpoint(struct mtd_info *mtd, loff_t from, size_t len)
+{
+#ifdef CONFIG_MTD_PMC551_DEBUG
+ printk(KERN_DEBUG "pmc551_unpoint()\n");
+#endif
+ return 0;
+}
+
+static int pmc551_read(struct mtd_info *mtd, loff_t from, size_t len,
+ size_t * retlen, u_char * buf)
+{
+ struct mypriv *priv = mtd->priv;
+ u32 soff_hi, soff_lo; /* start address offset hi/lo */
+ u32 eoff_hi, eoff_lo; /* end address offset hi/lo */
+ unsigned long end;
+ u_char *ptr;
+ u_char *copyto = buf;
+
+#ifdef CONFIG_MTD_PMC551_DEBUG
+ printk(KERN_DEBUG "pmc551_read(pos:%ld, len:%ld) asize: %ld\n",
+ (long)from, (long)len, (long)priv->asize);
+#endif
+
+ end = from + len - 1;
+ soff_hi = from & ~(priv->asize - 1);
+ eoff_hi = end & ~(priv->asize - 1);
+ soff_lo = from & (priv->asize - 1);
+ eoff_lo = end & (priv->asize - 1);
+
+ pmc551_point(mtd, from, len, retlen, (void **)&ptr, NULL);
+
+ if (soff_hi == eoff_hi) {
+ /* The whole thing fits within one access, so just one shot
+ will do it. */
+ memcpy(copyto, ptr, len);
+ copyto += len;
+ } else {
+ /* We have to do multiple writes to get all the data
+ written. */
+ while (soff_hi != eoff_hi) {
+#ifdef CONFIG_MTD_PMC551_DEBUG
+ printk(KERN_DEBUG "pmc551_read() soff_hi: %ld, "
+ "eoff_hi: %ld\n", (long)soff_hi, (long)eoff_hi);
+#endif
+ memcpy(copyto, ptr, priv->asize);
+ copyto += priv->asize;
+ if (soff_hi + priv->asize >= mtd->size) {
+ goto out;
+ }
+ soff_hi += priv->asize;
+ pmc551_point(mtd, soff_hi, priv->asize, retlen,
+ (void **)&ptr, NULL);
+ }
+ memcpy(copyto, ptr, eoff_lo);
+ copyto += eoff_lo;
+ }
+
+ out:
+#ifdef CONFIG_MTD_PMC551_DEBUG
+ printk(KERN_DEBUG "pmc551_read() done\n");
+#endif
+ *retlen = copyto - buf;
+ return 0;
+}
+
+static int pmc551_write(struct mtd_info *mtd, loff_t to, size_t len,
+ size_t * retlen, const u_char * buf)
+{
+ struct mypriv *priv = mtd->priv;
+ u32 soff_hi, soff_lo; /* start address offset hi/lo */
+ u32 eoff_hi, eoff_lo; /* end address offset hi/lo */
+ unsigned long end;
+ u_char *ptr;
+ const u_char *copyfrom = buf;
+
+#ifdef CONFIG_MTD_PMC551_DEBUG
+ printk(KERN_DEBUG "pmc551_write(pos:%ld, len:%ld) asize:%ld\n",
+ (long)to, (long)len, (long)priv->asize);
+#endif
+
+ end = to + len - 1;
+ soff_hi = to & ~(priv->asize - 1);
+ eoff_hi = end & ~(priv->asize - 1);
+ soff_lo = to & (priv->asize - 1);
+ eoff_lo = end & (priv->asize - 1);
+
+ pmc551_point(mtd, to, len, retlen, (void **)&ptr, NULL);
+
+ if (soff_hi == eoff_hi) {
+ /* The whole thing fits within one access, so just one shot
+ will do it. */
+ memcpy(ptr, copyfrom, len);
+ copyfrom += len;
+ } else {
+ /* We have to do multiple writes to get all the data
+ written. */
+ while (soff_hi != eoff_hi) {
+#ifdef CONFIG_MTD_PMC551_DEBUG
+ printk(KERN_DEBUG "pmc551_write() soff_hi: %ld, "
+ "eoff_hi: %ld\n", (long)soff_hi, (long)eoff_hi);
+#endif
+ memcpy(ptr, copyfrom, priv->asize);
+ copyfrom += priv->asize;
+ if (soff_hi >= mtd->size) {
+ goto out;
+ }
+ soff_hi += priv->asize;
+ pmc551_point(mtd, soff_hi, priv->asize, retlen,
+ (void **)&ptr, NULL);
+ }
+ memcpy(ptr, copyfrom, eoff_lo);
+ copyfrom += eoff_lo;
+ }
+
+ out:
+#ifdef CONFIG_MTD_PMC551_DEBUG
+ printk(KERN_DEBUG "pmc551_write() done\n");
+#endif
+ *retlen = copyfrom - buf;
+ return 0;
+}
+
+/*
+ * Fixup routines for the V370PDC
+ * PCI device ID 0x020011b0
+ *
+ * This function basically kick starts the DRAM oboard the card and gets it
+ * ready to be used. Before this is done the device reads VERY erratic, so
+ * much that it can crash the Linux 2.2.x series kernels when a user cat's
+ * /proc/pci .. though that is mainly a kernel bug in handling the PCI DEVSEL
+ * register. FIXME: stop spinning on registers .. must implement a timeout
+ * mechanism
+ * returns the size of the memory region found.
+ */
+static int fixup_pmc551(struct pci_dev *dev)
+{
+#ifdef CONFIG_MTD_PMC551_BUGFIX
+ u32 dram_data;
+#endif
+ u32 size, dcmd, cfg, dtmp;
+ u16 cmd, tmp, i;
+ u8 bcmd, counter;
+
+ /* Sanity Check */
+ if (!dev) {
+ return -ENODEV;
+ }
+
+ /*
+ * Attempt to reset the card
+ * FIXME: Stop Spinning registers
+ */
+ counter = 0;
+ /* unlock registers */
+ pci_write_config_byte(dev, PMC551_SYS_CTRL_REG, 0xA5);
+ /* read in old data */
+ pci_read_config_byte(dev, PMC551_SYS_CTRL_REG, &bcmd);
+ /* bang the reset line up and down for a few */
+ for (i = 0; i < 10; i++) {
+ counter = 0;
+ bcmd &= ~0x80;
+ while (counter++ < 100) {
+ pci_write_config_byte(dev, PMC551_SYS_CTRL_REG, bcmd);
+ }
+ counter = 0;
+ bcmd |= 0x80;
+ while (counter++ < 100) {
+ pci_write_config_byte(dev, PMC551_SYS_CTRL_REG, bcmd);
+ }
+ }
+ bcmd |= (0x40 | 0x20);
+ pci_write_config_byte(dev, PMC551_SYS_CTRL_REG, bcmd);
+
+ /*
+ * Take care and turn off the memory on the device while we
+ * tweak the configurations
+ */
+ pci_read_config_word(dev, PCI_COMMAND, &cmd);
+ tmp = cmd & ~(PCI_COMMAND_IO | PCI_COMMAND_MEMORY);
+ pci_write_config_word(dev, PCI_COMMAND, tmp);
+
+ /*
+ * Disable existing aperture before probing memory size
+ */
+ pci_read_config_dword(dev, PMC551_PCI_MEM_MAP0, &dcmd);
+ dtmp = (dcmd | PMC551_PCI_MEM_MAP_ENABLE | PMC551_PCI_MEM_MAP_REG_EN);
+ pci_write_config_dword(dev, PMC551_PCI_MEM_MAP0, dtmp);
+ /*
+ * Grab old BAR0 config so that we can figure out memory size
+ * This is another bit of kludge going on. The reason for the
+ * redundancy is I am hoping to retain the original configuration
+ * previously assigned to the card by the BIOS or some previous
+ * fixup routine in the kernel. So we read the old config into cfg,
+ * then write all 1's to the memory space, read back the result into
+ * "size", and then write back all the old config.
+ */
+ pci_read_config_dword(dev, PCI_BASE_ADDRESS_0, &cfg);
+#ifndef CONFIG_MTD_PMC551_BUGFIX
+ pci_write_config_dword(dev, PCI_BASE_ADDRESS_0, ~0);
+ pci_read_config_dword(dev, PCI_BASE_ADDRESS_0, &size);
+ size = (size & PCI_BASE_ADDRESS_MEM_MASK);
+ size &= ~(size - 1);
+ pci_write_config_dword(dev, PCI_BASE_ADDRESS_0, cfg);
+#else
+ /*
+ * Get the size of the memory by reading all the DRAM size values
+ * and adding them up.
+ *
+ * KLUDGE ALERT: the boards we are using have invalid column and
+ * row mux values. We fix them here, but this will break other
+ * memory configurations.
+ */
+ pci_read_config_dword(dev, PMC551_DRAM_BLK0, &dram_data);
+ size = PMC551_DRAM_BLK_GET_SIZE(dram_data);
+ dram_data = PMC551_DRAM_BLK_SET_COL_MUX(dram_data, 0x5);
+ dram_data = PMC551_DRAM_BLK_SET_ROW_MUX(dram_data, 0x9);
+ pci_write_config_dword(dev, PMC551_DRAM_BLK0, dram_data);
+
+ pci_read_config_dword(dev, PMC551_DRAM_BLK1, &dram_data);
+ size += PMC551_DRAM_BLK_GET_SIZE(dram_data);
+ dram_data = PMC551_DRAM_BLK_SET_COL_MUX(dram_data, 0x5);
+ dram_data = PMC551_DRAM_BLK_SET_ROW_MUX(dram_data, 0x9);
+ pci_write_config_dword(dev, PMC551_DRAM_BLK1, dram_data);
+
+ pci_read_config_dword(dev, PMC551_DRAM_BLK2, &dram_data);
+ size += PMC551_DRAM_BLK_GET_SIZE(dram_data);
+ dram_data = PMC551_DRAM_BLK_SET_COL_MUX(dram_data, 0x5);
+ dram_data = PMC551_DRAM_BLK_SET_ROW_MUX(dram_data, 0x9);
+ pci_write_config_dword(dev, PMC551_DRAM_BLK2, dram_data);
+
+ pci_read_config_dword(dev, PMC551_DRAM_BLK3, &dram_data);
+ size += PMC551_DRAM_BLK_GET_SIZE(dram_data);
+ dram_data = PMC551_DRAM_BLK_SET_COL_MUX(dram_data, 0x5);
+ dram_data = PMC551_DRAM_BLK_SET_ROW_MUX(dram_data, 0x9);
+ pci_write_config_dword(dev, PMC551_DRAM_BLK3, dram_data);
+
+ /*
+ * Oops .. something went wrong
+ */
+ if ((size &= PCI_BASE_ADDRESS_MEM_MASK) == 0) {
+ return -ENODEV;
+ }
+#endif /* CONFIG_MTD_PMC551_BUGFIX */
+
+ if ((cfg & PCI_BASE_ADDRESS_SPACE) != PCI_BASE_ADDRESS_SPACE_MEMORY) {
+ return -ENODEV;
+ }
+
+ /*
+ * Precharge Dram
+ */
+ pci_write_config_word(dev, PMC551_SDRAM_MA, 0x0400);
+ pci_write_config_word(dev, PMC551_SDRAM_CMD, 0x00bf);
+
+ /*
+ * Wait until command has gone through
+ * FIXME: register spinning issue
+ */
+ do {
+ pci_read_config_word(dev, PMC551_SDRAM_CMD, &cmd);
+ if (counter++ > 100)
+ break;
+ } while ((PCI_COMMAND_IO) & cmd);
+
+ /*
+ * Turn on auto refresh
+ * The loop is taken directly from Ramix's example code. I assume that
+ * this must be held high for some duration of time, but I can find no
+ * documentation refrencing the reasons why.
+ */
+ for (i = 1; i <= 8; i++) {
+ pci_write_config_word(dev, PMC551_SDRAM_CMD, 0x0df);
+
+ /*
+ * Make certain command has gone through
+ * FIXME: register spinning issue
+ */
+ counter = 0;
+ do {
+ pci_read_config_word(dev, PMC551_SDRAM_CMD, &cmd);
+ if (counter++ > 100)
+ break;
+ } while ((PCI_COMMAND_IO) & cmd);
+ }
+
+ pci_write_config_word(dev, PMC551_SDRAM_MA, 0x0020);
+ pci_write_config_word(dev, PMC551_SDRAM_CMD, 0x0ff);
+
+ /*
+ * Wait until command completes
+ * FIXME: register spinning issue
+ */
+ counter = 0;
+ do {
+ pci_read_config_word(dev, PMC551_SDRAM_CMD, &cmd);
+ if (counter++ > 100)
+ break;
+ } while ((PCI_COMMAND_IO) & cmd);
+
+ pci_read_config_dword(dev, PMC551_DRAM_CFG, &dcmd);
+ dcmd |= 0x02000000;
+ pci_write_config_dword(dev, PMC551_DRAM_CFG, dcmd);
+
+ /*
+ * Check to make certain fast back-to-back, if not
+ * then set it so
+ */
+ pci_read_config_word(dev, PCI_STATUS, &cmd);
+ if ((cmd & PCI_COMMAND_FAST_BACK) == 0) {
+ cmd |= PCI_COMMAND_FAST_BACK;
+ pci_write_config_word(dev, PCI_STATUS, cmd);
+ }
+
+ /*
+ * Check to make certain the DEVSEL is set correctly, this device
+ * has a tendency to assert DEVSEL and TRDY when a write is performed
+ * to the memory when memory is read-only
+ */
+ if ((cmd & PCI_STATUS_DEVSEL_MASK) != 0x0) {
+ cmd &= ~PCI_STATUS_DEVSEL_MASK;
+ pci_write_config_word(dev, PCI_STATUS, cmd);
+ }
+ /*
+ * Set to be prefetchable and put everything back based on old cfg.
+ * it's possible that the reset of the V370PDC nuked the original
+ * setup
+ */
+ /*
+ cfg |= PCI_BASE_ADDRESS_MEM_PREFETCH;
+ pci_write_config_dword( dev, PCI_BASE_ADDRESS_0, cfg );
+ */
+
+ /*
+ * Turn PCI memory and I/O bus access back on
+ */
+ pci_write_config_word(dev, PCI_COMMAND,
+ PCI_COMMAND_MEMORY | PCI_COMMAND_IO);
+#ifdef CONFIG_MTD_PMC551_DEBUG
+ /*
+ * Some screen fun
+ */
+ printk(KERN_DEBUG "pmc551: %d%sB (0x%x) of %sprefetchable memory at "
+ "0x%llx\n", (size < 1024) ? size : (size < 1048576) ?
+ size >> 10 : size >> 20,
+ (size < 1024) ? "" : (size < 1048576) ? "Ki" : "Mi", size,
+ ((dcmd & (0x1 << 3)) == 0) ? "non-" : "",
+ (unsigned long long)pci_resource_start(dev, 0));
+
+ /*
+ * Check to see the state of the memory
+ */
+ pci_read_config_dword(dev, PMC551_DRAM_BLK0, &dcmd);
+ printk(KERN_DEBUG "pmc551: DRAM_BLK0 Flags: %s,%s\n"
+ "pmc551: DRAM_BLK0 Size: %d at %d\n"
+ "pmc551: DRAM_BLK0 Row MUX: %d, Col MUX: %d\n",
+ (((0x1 << 1) & dcmd) == 0) ? "RW" : "RO",
+ (((0x1 << 0) & dcmd) == 0) ? "Off" : "On",
+ PMC551_DRAM_BLK_GET_SIZE(dcmd),
+ ((dcmd >> 20) & 0x7FF), ((dcmd >> 13) & 0x7),
+ ((dcmd >> 9) & 0xF));
+
+ pci_read_config_dword(dev, PMC551_DRAM_BLK1, &dcmd);
+ printk(KERN_DEBUG "pmc551: DRAM_BLK1 Flags: %s,%s\n"
+ "pmc551: DRAM_BLK1 Size: %d at %d\n"
+ "pmc551: DRAM_BLK1 Row MUX: %d, Col MUX: %d\n",
+ (((0x1 << 1) & dcmd) == 0) ? "RW" : "RO",
+ (((0x1 << 0) & dcmd) == 0) ? "Off" : "On",
+ PMC551_DRAM_BLK_GET_SIZE(dcmd),
+ ((dcmd >> 20) & 0x7FF), ((dcmd >> 13) & 0x7),
+ ((dcmd >> 9) & 0xF));
+
+ pci_read_config_dword(dev, PMC551_DRAM_BLK2, &dcmd);
+ printk(KERN_DEBUG "pmc551: DRAM_BLK2 Flags: %s,%s\n"
+ "pmc551: DRAM_BLK2 Size: %d at %d\n"
+ "pmc551: DRAM_BLK2 Row MUX: %d, Col MUX: %d\n",
+ (((0x1 << 1) & dcmd) == 0) ? "RW" : "RO",
+ (((0x1 << 0) & dcmd) == 0) ? "Off" : "On",
+ PMC551_DRAM_BLK_GET_SIZE(dcmd),
+ ((dcmd >> 20) & 0x7FF), ((dcmd >> 13) & 0x7),
+ ((dcmd >> 9) & 0xF));
+
+ pci_read_config_dword(dev, PMC551_DRAM_BLK3, &dcmd);
+ printk(KERN_DEBUG "pmc551: DRAM_BLK3 Flags: %s,%s\n"
+ "pmc551: DRAM_BLK3 Size: %d at %d\n"
+ "pmc551: DRAM_BLK3 Row MUX: %d, Col MUX: %d\n",
+ (((0x1 << 1) & dcmd) == 0) ? "RW" : "RO",
+ (((0x1 << 0) & dcmd) == 0) ? "Off" : "On",
+ PMC551_DRAM_BLK_GET_SIZE(dcmd),
+ ((dcmd >> 20) & 0x7FF), ((dcmd >> 13) & 0x7),
+ ((dcmd >> 9) & 0xF));
+
+ pci_read_config_word(dev, PCI_COMMAND, &cmd);
+ printk(KERN_DEBUG "pmc551: Memory Access %s\n",
+ (((0x1 << 1) & cmd) == 0) ? "off" : "on");
+ printk(KERN_DEBUG "pmc551: I/O Access %s\n",
+ (((0x1 << 0) & cmd) == 0) ? "off" : "on");
+
+ pci_read_config_word(dev, PCI_STATUS, &cmd);
+ printk(KERN_DEBUG "pmc551: Devsel %s\n",
+ ((PCI_STATUS_DEVSEL_MASK & cmd) == 0x000) ? "Fast" :
+ ((PCI_STATUS_DEVSEL_MASK & cmd) == 0x200) ? "Medium" :
+ ((PCI_STATUS_DEVSEL_MASK & cmd) == 0x400) ? "Slow" : "Invalid");
+
+ printk(KERN_DEBUG "pmc551: %sFast Back-to-Back\n",
+ ((PCI_COMMAND_FAST_BACK & cmd) == 0) ? "Not " : "");
+
+ pci_read_config_byte(dev, PMC551_SYS_CTRL_REG, &bcmd);
+ printk(KERN_DEBUG "pmc551: EEPROM is under %s control\n"
+ "pmc551: System Control Register is %slocked to PCI access\n"
+ "pmc551: System Control Register is %slocked to EEPROM access\n",
+ (bcmd & 0x1) ? "software" : "hardware",
+ (bcmd & 0x20) ? "" : "un", (bcmd & 0x40) ? "" : "un");
+#endif
+ return size;
+}
+
+/*
+ * Kernel version specific module stuffages
+ */
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Mark Ferrell <mferrell@mvista.com>");
+MODULE_DESCRIPTION(PMC551_VERSION);
+
+/*
+ * Stuff these outside the ifdef so as to not bust compiled in driver support
+ */
+static int msize = 0;
+static int asize = 0;
+
+module_param(msize, int, 0);
+MODULE_PARM_DESC(msize, "memory size in MiB [1 - 1024]");
+module_param(asize, int, 0);
+MODULE_PARM_DESC(asize, "aperture size, must be <= memsize [1-1024]");
+
+/*
+ * PMC551 Card Initialization
+ */
+static int __init init_pmc551(void)
+{
+ struct pci_dev *PCI_Device = NULL;
+ struct mypriv *priv;
+ int found = 0;
+ struct mtd_info *mtd;
+ int length = 0;
+
+ if (msize) {
+ msize = (1 << (ffs(msize) - 1)) << 20;
+ if (msize > (1 << 30)) {
+ printk(KERN_NOTICE "pmc551: Invalid memory size [%d]\n",
+ msize);
+ return -EINVAL;
+ }
+ }
+
+ if (asize) {
+ asize = (1 << (ffs(asize) - 1)) << 20;
+ if (asize > (1 << 30)) {
+ printk(KERN_NOTICE "pmc551: Invalid aperture size "
+ "[%d]\n", asize);
+ return -EINVAL;
+ }
+ }
+
+ printk(KERN_INFO PMC551_VERSION);
+
+ /*
+ * PCU-bus chipset probe.
+ */
+ for (;;) {
+
+ if ((PCI_Device = pci_get_device(PCI_VENDOR_ID_V3_SEMI,
+ PCI_DEVICE_ID_V3_SEMI_V370PDC,
+ PCI_Device)) == NULL) {
+ break;
+ }
+
+ printk(KERN_NOTICE "pmc551: Found PCI V370PDC at 0x%llx\n",
+ (unsigned long long)pci_resource_start(PCI_Device, 0));
+
+ /*
+ * The PMC551 device acts VERY weird if you don't init it
+ * first. i.e. it will not correctly report devsel. If for
+ * some reason the sdram is in a wrote-protected state the
+ * device will DEVSEL when it is written to causing problems
+ * with the oldproc.c driver in
+ * some kernels (2.2.*)
+ */
+ if ((length = fixup_pmc551(PCI_Device)) <= 0) {
+ printk(KERN_NOTICE "pmc551: Cannot init SDRAM\n");
+ break;
+ }
+
+ /*
+ * This is needed until the driver is capable of reading the
+ * onboard I2C SROM to discover the "real" memory size.
+ */
+ if (msize) {
+ length = msize;
+ printk(KERN_NOTICE "pmc551: Using specified memory "
+ "size 0x%x\n", length);
+ } else {
+ msize = length;
+ }
+
+ mtd = kzalloc(sizeof(struct mtd_info), GFP_KERNEL);
+ if (!mtd)
+ break;
+
+ priv = kzalloc(sizeof(struct mypriv), GFP_KERNEL);
+ if (!priv) {
+ kfree(mtd);
+ break;
+ }
+ mtd->priv = priv;
+ priv->dev = PCI_Device;
+
+ if (asize > length) {
+ printk(KERN_NOTICE "pmc551: reducing aperture size to "
+ "fit %dM\n", length >> 20);
+ priv->asize = asize = length;
+ } else if (asize == 0 || asize == length) {
+ printk(KERN_NOTICE "pmc551: Using existing aperture "
+ "size %dM\n", length >> 20);
+ priv->asize = asize = length;
+ } else {
+ printk(KERN_NOTICE "pmc551: Using specified aperture "
+ "size %dM\n", asize >> 20);
+ priv->asize = asize;
+ }
+ priv->start = pci_iomap(PCI_Device, 0, priv->asize);
+
+ if (!priv->start) {
+ printk(KERN_NOTICE "pmc551: Unable to map IO space\n");
+ kfree(mtd->priv);
+ kfree(mtd);
+ break;
+ }
+#ifdef CONFIG_MTD_PMC551_DEBUG
+ printk(KERN_DEBUG "pmc551: setting aperture to %d\n",
+ ffs(priv->asize >> 20) - 1);
+#endif
+
+ priv->base_map0 = (PMC551_PCI_MEM_MAP_REG_EN
+ | PMC551_PCI_MEM_MAP_ENABLE
+ | (ffs(priv->asize >> 20) - 1) << 4);
+ priv->curr_map0 = priv->base_map0;
+ pci_write_config_dword(priv->dev, PMC551_PCI_MEM_MAP0,
+ priv->curr_map0);
+
+#ifdef CONFIG_MTD_PMC551_DEBUG
+ printk(KERN_DEBUG "pmc551: aperture set to %d\n",
+ (priv->base_map0 & 0xF0) >> 4);
+#endif
+
+ mtd->size = msize;
+ mtd->flags = MTD_CAP_RAM;
+ mtd->_erase = pmc551_erase;
+ mtd->_read = pmc551_read;
+ mtd->_write = pmc551_write;
+ mtd->_point = pmc551_point;
+ mtd->_unpoint = pmc551_unpoint;
+ mtd->type = MTD_RAM;
+ mtd->name = "PMC551 RAM board";
+ mtd->erasesize = 0x10000;
+ mtd->writesize = 1;
+ mtd->owner = THIS_MODULE;
+
+ if (mtd_device_register(mtd, NULL, 0)) {
+ printk(KERN_NOTICE "pmc551: Failed to register new device\n");
+ pci_iounmap(PCI_Device, priv->start);
+ kfree(mtd->priv);
+ kfree(mtd);
+ break;
+ }
+
+ /* Keep a reference as the mtd_device_register worked */
+ pci_dev_get(PCI_Device);
+
+ printk(KERN_NOTICE "Registered pmc551 memory device.\n");
+ printk(KERN_NOTICE "Mapped %dMiB of memory from 0x%p to 0x%p\n",
+ priv->asize >> 20,
+ priv->start, priv->start + priv->asize);
+ printk(KERN_NOTICE "Total memory is %d%sB\n",
+ (length < 1024) ? length :
+ (length < 1048576) ? length >> 10 : length >> 20,
+ (length < 1024) ? "" : (length < 1048576) ? "Ki" : "Mi");
+ priv->nextpmc551 = pmc551list;
+ pmc551list = mtd;
+ found++;
+ }
+
+ /* Exited early, reference left over */
+ pci_dev_put(PCI_Device);
+
+ if (!pmc551list) {
+ printk(KERN_NOTICE "pmc551: not detected\n");
+ return -ENODEV;
+ } else {
+ printk(KERN_NOTICE "pmc551: %d pmc551 devices loaded\n", found);
+ return 0;
+ }
+}
+
+/*
+ * PMC551 Card Cleanup
+ */
+static void __exit cleanup_pmc551(void)
+{
+ int found = 0;
+ struct mtd_info *mtd;
+ struct mypriv *priv;
+
+ while ((mtd = pmc551list)) {
+ priv = mtd->priv;
+ pmc551list = priv->nextpmc551;
+
+ if (priv->start) {
+ printk(KERN_DEBUG "pmc551: unmapping %dMiB starting at "
+ "0x%p\n", priv->asize >> 20, priv->start);
+ pci_iounmap(priv->dev, priv->start);
+ }
+ pci_dev_put(priv->dev);
+
+ kfree(mtd->priv);
+ mtd_device_unregister(mtd);
+ kfree(mtd);
+ found++;
+ }
+
+ printk(KERN_NOTICE "pmc551: %d pmc551 devices unloaded\n", found);
+}
+
+module_init(init_pmc551);
+module_exit(cleanup_pmc551);
diff --git a/kernel/drivers/mtd/devices/serial_flash_cmds.h b/kernel/drivers/mtd/devices/serial_flash_cmds.h
new file mode 100644
index 000000000..f59a12529
--- /dev/null
+++ b/kernel/drivers/mtd/devices/serial_flash_cmds.h
@@ -0,0 +1,61 @@
+/*
+ * Generic/SFDP Flash Commands and Device Capabilities
+ *
+ * Copyright (C) 2013 Lee Jones <lee.jones@lianro.org>
+ *
+ * This code is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#ifndef _MTD_SERIAL_FLASH_CMDS_H
+#define _MTD_SERIAL_FLASH_CMDS_H
+
+/* Generic Flash Commands/OPCODEs */
+#define SPINOR_OP_RDSR2 0x35
+#define SPINOR_OP_WRVCR 0x81
+#define SPINOR_OP_RDVCR 0x85
+
+/* JEDEC Standard - Serial Flash Discoverable Parmeters (SFDP) Commands */
+#define SPINOR_OP_READ_1_2_2 0xbb /* DUAL I/O READ */
+#define SPINOR_OP_READ_1_4_4 0xeb /* QUAD I/O READ */
+
+#define SPINOR_OP_WRITE 0x02 /* PAGE PROGRAM */
+#define SPINOR_OP_WRITE_1_1_2 0xa2 /* DUAL INPUT PROGRAM */
+#define SPINOR_OP_WRITE_1_2_2 0xd2 /* DUAL INPUT EXT PROGRAM */
+#define SPINOR_OP_WRITE_1_1_4 0x32 /* QUAD INPUT PROGRAM */
+#define SPINOR_OP_WRITE_1_4_4 0x12 /* QUAD INPUT EXT PROGRAM */
+
+/* READ commands with 32-bit addressing */
+#define SPINOR_OP_READ4_1_2_2 0xbc
+#define SPINOR_OP_READ4_1_4_4 0xec
+
+/* Configuration flags */
+#define FLASH_FLAG_SINGLE 0x000000ff
+#define FLASH_FLAG_READ_WRITE 0x00000001
+#define FLASH_FLAG_READ_FAST 0x00000002
+#define FLASH_FLAG_SE_4K 0x00000004
+#define FLASH_FLAG_SE_32K 0x00000008
+#define FLASH_FLAG_CE 0x00000010
+#define FLASH_FLAG_32BIT_ADDR 0x00000020
+#define FLASH_FLAG_RESET 0x00000040
+#define FLASH_FLAG_DYB_LOCKING 0x00000080
+
+#define FLASH_FLAG_DUAL 0x0000ff00
+#define FLASH_FLAG_READ_1_1_2 0x00000100
+#define FLASH_FLAG_READ_1_2_2 0x00000200
+#define FLASH_FLAG_READ_2_2_2 0x00000400
+#define FLASH_FLAG_WRITE_1_1_2 0x00001000
+#define FLASH_FLAG_WRITE_1_2_2 0x00002000
+#define FLASH_FLAG_WRITE_2_2_2 0x00004000
+
+#define FLASH_FLAG_QUAD 0x00ff0000
+#define FLASH_FLAG_READ_1_1_4 0x00010000
+#define FLASH_FLAG_READ_1_4_4 0x00020000
+#define FLASH_FLAG_READ_4_4_4 0x00040000
+#define FLASH_FLAG_WRITE_1_1_4 0x00100000
+#define FLASH_FLAG_WRITE_1_4_4 0x00200000
+#define FLASH_FLAG_WRITE_4_4_4 0x00400000
+
+#endif /* _MTD_SERIAL_FLASH_CMDS_H */
diff --git a/kernel/drivers/mtd/devices/slram.c b/kernel/drivers/mtd/devices/slram.c
new file mode 100644
index 000000000..2fc4957cb
--- /dev/null
+++ b/kernel/drivers/mtd/devices/slram.c
@@ -0,0 +1,347 @@
+/*======================================================================
+
+ This driver provides a method to access memory not used by the kernel
+ itself (i.e. if the kernel commandline mem=xxx is used). To actually
+ use slram at least mtdblock or mtdchar is required (for block or
+ character device access).
+
+ Usage:
+
+ if compiled as loadable module:
+ modprobe slram map=<name>,<start>,<end/offset>
+ if statically linked into the kernel use the following kernel cmd.line
+ slram=<name>,<start>,<end/offset>
+
+ <name>: name of the device that will be listed in /proc/mtd
+ <start>: start of the memory region, decimal or hex (0xabcdef)
+ <end/offset>: end of the memory region. It's possible to use +0x1234
+ to specify the offset instead of the absolute address
+
+ NOTE:
+ With slram it's only possible to map a contiguous memory region. Therefore
+ if there's a device mapped somewhere in the region specified slram will
+ fail to load (see kernel log if modprobe fails).
+
+ -
+
+ Jochen Schaeuble <psionic@psionic.de>
+
+======================================================================*/
+
+
+#include <linux/module.h>
+#include <asm/uaccess.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/ptrace.h>
+#include <linux/slab.h>
+#include <linux/string.h>
+#include <linux/timer.h>
+#include <linux/major.h>
+#include <linux/fs.h>
+#include <linux/ioctl.h>
+#include <linux/init.h>
+#include <asm/io.h>
+
+#include <linux/mtd/mtd.h>
+
+#define SLRAM_MAX_DEVICES_PARAMS 6 /* 3 parameters / device */
+#define SLRAM_BLK_SZ 0x4000
+
+#define T(fmt, args...) printk(KERN_DEBUG fmt, ## args)
+#define E(fmt, args...) printk(KERN_NOTICE fmt, ## args)
+
+typedef struct slram_priv {
+ u_char *start;
+ u_char *end;
+} slram_priv_t;
+
+typedef struct slram_mtd_list {
+ struct mtd_info *mtdinfo;
+ struct slram_mtd_list *next;
+} slram_mtd_list_t;
+
+#ifdef MODULE
+static char *map[SLRAM_MAX_DEVICES_PARAMS];
+
+module_param_array(map, charp, NULL, 0);
+MODULE_PARM_DESC(map, "List of memory regions to map. \"map=<name>, <start>, <length / end>\"");
+#else
+static char *map;
+#endif
+
+static slram_mtd_list_t *slram_mtdlist = NULL;
+
+static int slram_erase(struct mtd_info *, struct erase_info *);
+static int slram_point(struct mtd_info *, loff_t, size_t, size_t *, void **,
+ resource_size_t *);
+static int slram_unpoint(struct mtd_info *, loff_t, size_t);
+static int slram_read(struct mtd_info *, loff_t, size_t, size_t *, u_char *);
+static int slram_write(struct mtd_info *, loff_t, size_t, size_t *, const u_char *);
+
+static int slram_erase(struct mtd_info *mtd, struct erase_info *instr)
+{
+ slram_priv_t *priv = mtd->priv;
+
+ memset(priv->start + instr->addr, 0xff, instr->len);
+ /* This'll catch a few races. Free the thing before returning :)
+ * I don't feel at all ashamed. This kind of thing is possible anyway
+ * with flash, but unlikely.
+ */
+ instr->state = MTD_ERASE_DONE;
+ mtd_erase_callback(instr);
+ return(0);
+}
+
+static int slram_point(struct mtd_info *mtd, loff_t from, size_t len,
+ size_t *retlen, void **virt, resource_size_t *phys)
+{
+ slram_priv_t *priv = mtd->priv;
+
+ *virt = priv->start + from;
+ *retlen = len;
+ return(0);
+}
+
+static int slram_unpoint(struct mtd_info *mtd, loff_t from, size_t len)
+{
+ return 0;
+}
+
+static int slram_read(struct mtd_info *mtd, loff_t from, size_t len,
+ size_t *retlen, u_char *buf)
+{
+ slram_priv_t *priv = mtd->priv;
+
+ memcpy(buf, priv->start + from, len);
+ *retlen = len;
+ return(0);
+}
+
+static int slram_write(struct mtd_info *mtd, loff_t to, size_t len,
+ size_t *retlen, const u_char *buf)
+{
+ slram_priv_t *priv = mtd->priv;
+
+ memcpy(priv->start + to, buf, len);
+ *retlen = len;
+ return(0);
+}
+
+/*====================================================================*/
+
+static int register_device(char *name, unsigned long start, unsigned long length)
+{
+ slram_mtd_list_t **curmtd;
+
+ curmtd = &slram_mtdlist;
+ while (*curmtd) {
+ curmtd = &(*curmtd)->next;
+ }
+
+ *curmtd = kmalloc(sizeof(slram_mtd_list_t), GFP_KERNEL);
+ if (!(*curmtd)) {
+ E("slram: Cannot allocate new MTD device.\n");
+ return(-ENOMEM);
+ }
+ (*curmtd)->mtdinfo = kzalloc(sizeof(struct mtd_info), GFP_KERNEL);
+ (*curmtd)->next = NULL;
+
+ if ((*curmtd)->mtdinfo) {
+ (*curmtd)->mtdinfo->priv =
+ kzalloc(sizeof(slram_priv_t), GFP_KERNEL);
+
+ if (!(*curmtd)->mtdinfo->priv) {
+ kfree((*curmtd)->mtdinfo);
+ (*curmtd)->mtdinfo = NULL;
+ }
+ }
+
+ if (!(*curmtd)->mtdinfo) {
+ E("slram: Cannot allocate new MTD device.\n");
+ return(-ENOMEM);
+ }
+
+ if (!(((slram_priv_t *)(*curmtd)->mtdinfo->priv)->start =
+ ioremap(start, length))) {
+ E("slram: ioremap failed\n");
+ return -EIO;
+ }
+ ((slram_priv_t *)(*curmtd)->mtdinfo->priv)->end =
+ ((slram_priv_t *)(*curmtd)->mtdinfo->priv)->start + length;
+
+
+ (*curmtd)->mtdinfo->name = name;
+ (*curmtd)->mtdinfo->size = length;
+ (*curmtd)->mtdinfo->flags = MTD_CAP_RAM;
+ (*curmtd)->mtdinfo->_erase = slram_erase;
+ (*curmtd)->mtdinfo->_point = slram_point;
+ (*curmtd)->mtdinfo->_unpoint = slram_unpoint;
+ (*curmtd)->mtdinfo->_read = slram_read;
+ (*curmtd)->mtdinfo->_write = slram_write;
+ (*curmtd)->mtdinfo->owner = THIS_MODULE;
+ (*curmtd)->mtdinfo->type = MTD_RAM;
+ (*curmtd)->mtdinfo->erasesize = SLRAM_BLK_SZ;
+ (*curmtd)->mtdinfo->writesize = 1;
+
+ if (mtd_device_register((*curmtd)->mtdinfo, NULL, 0)) {
+ E("slram: Failed to register new device\n");
+ iounmap(((slram_priv_t *)(*curmtd)->mtdinfo->priv)->start);
+ kfree((*curmtd)->mtdinfo->priv);
+ kfree((*curmtd)->mtdinfo);
+ return(-EAGAIN);
+ }
+ T("slram: Registered device %s from %luKiB to %luKiB\n", name,
+ (start / 1024), ((start + length) / 1024));
+ T("slram: Mapped from 0x%p to 0x%p\n",
+ ((slram_priv_t *)(*curmtd)->mtdinfo->priv)->start,
+ ((slram_priv_t *)(*curmtd)->mtdinfo->priv)->end);
+ return(0);
+}
+
+static void unregister_devices(void)
+{
+ slram_mtd_list_t *nextitem;
+
+ while (slram_mtdlist) {
+ nextitem = slram_mtdlist->next;
+ mtd_device_unregister(slram_mtdlist->mtdinfo);
+ iounmap(((slram_priv_t *)slram_mtdlist->mtdinfo->priv)->start);
+ kfree(slram_mtdlist->mtdinfo->priv);
+ kfree(slram_mtdlist->mtdinfo);
+ kfree(slram_mtdlist);
+ slram_mtdlist = nextitem;
+ }
+}
+
+static unsigned long handle_unit(unsigned long value, char *unit)
+{
+ if ((*unit == 'M') || (*unit == 'm')) {
+ return(value * 1024 * 1024);
+ } else if ((*unit == 'K') || (*unit == 'k')) {
+ return(value * 1024);
+ }
+ return(value);
+}
+
+static int parse_cmdline(char *devname, char *szstart, char *szlength)
+{
+ char *buffer;
+ unsigned long devstart;
+ unsigned long devlength;
+
+ if ((!devname) || (!szstart) || (!szlength)) {
+ unregister_devices();
+ return(-EINVAL);
+ }
+
+ devstart = simple_strtoul(szstart, &buffer, 0);
+ devstart = handle_unit(devstart, buffer);
+
+ if (*(szlength) != '+') {
+ devlength = simple_strtoul(szlength, &buffer, 0);
+ devlength = handle_unit(devlength, buffer);
+ if (devlength < devstart)
+ goto err_out;
+
+ devlength -= devstart;
+ } else {
+ devlength = simple_strtoul(szlength + 1, &buffer, 0);
+ devlength = handle_unit(devlength, buffer);
+ }
+ T("slram: devname=%s, devstart=0x%lx, devlength=0x%lx\n",
+ devname, devstart, devlength);
+ if (devlength % SLRAM_BLK_SZ != 0)
+ goto err_out;
+
+ if ((devstart = register_device(devname, devstart, devlength))){
+ unregister_devices();
+ return((int)devstart);
+ }
+ return(0);
+
+err_out:
+ E("slram: Illegal length parameter.\n");
+ return(-EINVAL);
+}
+
+#ifndef MODULE
+
+static int __init mtd_slram_setup(char *str)
+{
+ map = str;
+ return(1);
+}
+
+__setup("slram=", mtd_slram_setup);
+
+#endif
+
+static int __init init_slram(void)
+{
+ char *devname;
+
+#ifndef MODULE
+ char *devstart;
+ char *devlength;
+
+ if (!map) {
+ E("slram: not enough parameters.\n");
+ return(-EINVAL);
+ }
+ while (map) {
+ devname = devstart = devlength = NULL;
+
+ if (!(devname = strsep(&map, ","))) {
+ E("slram: No devicename specified.\n");
+ break;
+ }
+ T("slram: devname = %s\n", devname);
+ if ((!map) || (!(devstart = strsep(&map, ",")))) {
+ E("slram: No devicestart specified.\n");
+ }
+ T("slram: devstart = %s\n", devstart);
+ if ((!map) || (!(devlength = strsep(&map, ",")))) {
+ E("slram: No devicelength / -end specified.\n");
+ }
+ T("slram: devlength = %s\n", devlength);
+ if (parse_cmdline(devname, devstart, devlength) != 0) {
+ return(-EINVAL);
+ }
+ }
+#else
+ int count;
+ int i;
+
+ for (count = 0; count < SLRAM_MAX_DEVICES_PARAMS && map[count];
+ count++) {
+ }
+
+ if ((count % 3 != 0) || (count == 0)) {
+ E("slram: not enough parameters.\n");
+ return(-EINVAL);
+ }
+ for (i = 0; i < (count / 3); i++) {
+ devname = map[i * 3];
+
+ if (parse_cmdline(devname, map[i * 3 + 1], map[i * 3 + 2])!=0) {
+ return(-EINVAL);
+ }
+
+ }
+#endif /* !MODULE */
+
+ return(0);
+}
+
+static void __exit cleanup_slram(void)
+{
+ unregister_devices();
+}
+
+module_init(init_slram);
+module_exit(cleanup_slram);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Jochen Schaeuble <psionic@psionic.de>");
+MODULE_DESCRIPTION("MTD driver for uncached system RAM");
diff --git a/kernel/drivers/mtd/devices/spear_smi.c b/kernel/drivers/mtd/devices/spear_smi.c
new file mode 100644
index 000000000..508bab3bd
--- /dev/null
+++ b/kernel/drivers/mtd/devices/spear_smi.c
@@ -0,0 +1,1092 @@
+/*
+ * SMI (Serial Memory Controller) device driver for Serial NOR Flash on
+ * SPEAr platform
+ * The serial nor interface is largely based on drivers/mtd/m25p80.c,
+ * however the SPI interface has been replaced by SMI.
+ *
+ * Copyright © 2010 STMicroelectronics.
+ * Ashish Priyadarshi
+ * Shiraz Hashim <shiraz.linux.kernel@gmail.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/errno.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/ioport.h>
+#include <linux/jiffies.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/param.h>
+#include <linux/platform_device.h>
+#include <linux/pm.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/spear_smi.h>
+#include <linux/mutex.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <linux/wait.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+
+/* SMI clock rate */
+#define SMI_MAX_CLOCK_FREQ 50000000 /* 50 MHz */
+
+/* MAX time out to safely come out of a erase or write busy conditions */
+#define SMI_PROBE_TIMEOUT (HZ / 10)
+#define SMI_MAX_TIME_OUT (3 * HZ)
+
+/* timeout for command completion */
+#define SMI_CMD_TIMEOUT (HZ / 10)
+
+/* registers of smi */
+#define SMI_CR1 0x0 /* SMI control register 1 */
+#define SMI_CR2 0x4 /* SMI control register 2 */
+#define SMI_SR 0x8 /* SMI status register */
+#define SMI_TR 0xC /* SMI transmit register */
+#define SMI_RR 0x10 /* SMI receive register */
+
+/* defines for control_reg 1 */
+#define BANK_EN (0xF << 0) /* enables all banks */
+#define DSEL_TIME (0x6 << 4) /* Deselect time 6 + 1 SMI_CK periods */
+#define SW_MODE (0x1 << 28) /* enables SW Mode */
+#define WB_MODE (0x1 << 29) /* Write Burst Mode */
+#define FAST_MODE (0x1 << 15) /* Fast Mode */
+#define HOLD1 (0x1 << 16) /* Clock Hold period selection */
+
+/* defines for control_reg 2 */
+#define SEND (0x1 << 7) /* Send data */
+#define TFIE (0x1 << 8) /* Transmission Flag Interrupt Enable */
+#define WCIE (0x1 << 9) /* Write Complete Interrupt Enable */
+#define RD_STATUS_REG (0x1 << 10) /* reads status reg */
+#define WE (0x1 << 11) /* Write Enable */
+
+#define TX_LEN_SHIFT 0
+#define RX_LEN_SHIFT 4
+#define BANK_SHIFT 12
+
+/* defines for status register */
+#define SR_WIP 0x1 /* Write in progress */
+#define SR_WEL 0x2 /* Write enable latch */
+#define SR_BP0 0x4 /* Block protect 0 */
+#define SR_BP1 0x8 /* Block protect 1 */
+#define SR_BP2 0x10 /* Block protect 2 */
+#define SR_SRWD 0x80 /* SR write protect */
+#define TFF 0x100 /* Transfer Finished Flag */
+#define WCF 0x200 /* Transfer Finished Flag */
+#define ERF1 0x400 /* Forbidden Write Request */
+#define ERF2 0x800 /* Forbidden Access */
+
+#define WM_SHIFT 12
+
+/* flash opcodes */
+#define OPCODE_RDID 0x9f /* Read JEDEC ID */
+
+/* Flash Device Ids maintenance section */
+
+/* data structure to maintain flash ids from different vendors */
+struct flash_device {
+ char *name;
+ u8 erase_cmd;
+ u32 device_id;
+ u32 pagesize;
+ unsigned long sectorsize;
+ unsigned long size_in_bytes;
+};
+
+#define FLASH_ID(n, es, id, psize, ssize, size) \
+{ \
+ .name = n, \
+ .erase_cmd = es, \
+ .device_id = id, \
+ .pagesize = psize, \
+ .sectorsize = ssize, \
+ .size_in_bytes = size \
+}
+
+static struct flash_device flash_devices[] = {
+ FLASH_ID("st m25p16" , 0xd8, 0x00152020, 0x100, 0x10000, 0x200000),
+ FLASH_ID("st m25p32" , 0xd8, 0x00162020, 0x100, 0x10000, 0x400000),
+ FLASH_ID("st m25p64" , 0xd8, 0x00172020, 0x100, 0x10000, 0x800000),
+ FLASH_ID("st m25p128" , 0xd8, 0x00182020, 0x100, 0x40000, 0x1000000),
+ FLASH_ID("st m25p05" , 0xd8, 0x00102020, 0x80 , 0x8000 , 0x10000),
+ FLASH_ID("st m25p10" , 0xd8, 0x00112020, 0x80 , 0x8000 , 0x20000),
+ FLASH_ID("st m25p20" , 0xd8, 0x00122020, 0x100, 0x10000, 0x40000),
+ FLASH_ID("st m25p40" , 0xd8, 0x00132020, 0x100, 0x10000, 0x80000),
+ FLASH_ID("st m25p80" , 0xd8, 0x00142020, 0x100, 0x10000, 0x100000),
+ FLASH_ID("st m45pe10" , 0xd8, 0x00114020, 0x100, 0x10000, 0x20000),
+ FLASH_ID("st m45pe20" , 0xd8, 0x00124020, 0x100, 0x10000, 0x40000),
+ FLASH_ID("st m45pe40" , 0xd8, 0x00134020, 0x100, 0x10000, 0x80000),
+ FLASH_ID("st m45pe80" , 0xd8, 0x00144020, 0x100, 0x10000, 0x100000),
+ FLASH_ID("sp s25fl004" , 0xd8, 0x00120201, 0x100, 0x10000, 0x80000),
+ FLASH_ID("sp s25fl008" , 0xd8, 0x00130201, 0x100, 0x10000, 0x100000),
+ FLASH_ID("sp s25fl016" , 0xd8, 0x00140201, 0x100, 0x10000, 0x200000),
+ FLASH_ID("sp s25fl032" , 0xd8, 0x00150201, 0x100, 0x10000, 0x400000),
+ FLASH_ID("sp s25fl064" , 0xd8, 0x00160201, 0x100, 0x10000, 0x800000),
+ FLASH_ID("atmel 25f512" , 0x52, 0x0065001F, 0x80 , 0x8000 , 0x10000),
+ FLASH_ID("atmel 25f1024" , 0x52, 0x0060001F, 0x100, 0x8000 , 0x20000),
+ FLASH_ID("atmel 25f2048" , 0x52, 0x0063001F, 0x100, 0x10000, 0x40000),
+ FLASH_ID("atmel 25f4096" , 0x52, 0x0064001F, 0x100, 0x10000, 0x80000),
+ FLASH_ID("atmel 25fs040" , 0xd7, 0x0004661F, 0x100, 0x10000, 0x80000),
+ FLASH_ID("mac 25l512" , 0xd8, 0x001020C2, 0x010, 0x10000, 0x10000),
+ FLASH_ID("mac 25l1005" , 0xd8, 0x001120C2, 0x010, 0x10000, 0x20000),
+ FLASH_ID("mac 25l2005" , 0xd8, 0x001220C2, 0x010, 0x10000, 0x40000),
+ FLASH_ID("mac 25l4005" , 0xd8, 0x001320C2, 0x010, 0x10000, 0x80000),
+ FLASH_ID("mac 25l4005a" , 0xd8, 0x001320C2, 0x010, 0x10000, 0x80000),
+ FLASH_ID("mac 25l8005" , 0xd8, 0x001420C2, 0x010, 0x10000, 0x100000),
+ FLASH_ID("mac 25l1605" , 0xd8, 0x001520C2, 0x100, 0x10000, 0x200000),
+ FLASH_ID("mac 25l1605a" , 0xd8, 0x001520C2, 0x010, 0x10000, 0x200000),
+ FLASH_ID("mac 25l3205" , 0xd8, 0x001620C2, 0x100, 0x10000, 0x400000),
+ FLASH_ID("mac 25l3205a" , 0xd8, 0x001620C2, 0x100, 0x10000, 0x400000),
+ FLASH_ID("mac 25l6405" , 0xd8, 0x001720C2, 0x100, 0x10000, 0x800000),
+};
+
+/* Define spear specific structures */
+
+struct spear_snor_flash;
+
+/**
+ * struct spear_smi - Structure for SMI Device
+ *
+ * @clk: functional clock
+ * @status: current status register of SMI.
+ * @clk_rate: functional clock rate of SMI (default: SMI_MAX_CLOCK_FREQ)
+ * @lock: lock to prevent parallel access of SMI.
+ * @io_base: base address for registers of SMI.
+ * @pdev: platform device
+ * @cmd_complete: queue to wait for command completion of NOR-flash.
+ * @num_flashes: number of flashes actually present on board.
+ * @flash: separate structure for each Serial NOR-flash attached to SMI.
+ */
+struct spear_smi {
+ struct clk *clk;
+ u32 status;
+ unsigned long clk_rate;
+ struct mutex lock;
+ void __iomem *io_base;
+ struct platform_device *pdev;
+ wait_queue_head_t cmd_complete;
+ u32 num_flashes;
+ struct spear_snor_flash *flash[MAX_NUM_FLASH_CHIP];
+};
+
+/**
+ * struct spear_snor_flash - Structure for Serial NOR Flash
+ *
+ * @bank: Bank number(0, 1, 2, 3) for each NOR-flash.
+ * @dev_id: Device ID of NOR-flash.
+ * @lock: lock to manage flash read, write and erase operations
+ * @mtd: MTD info for each NOR-flash.
+ * @num_parts: Total number of partition in each bank of NOR-flash.
+ * @parts: Partition info for each bank of NOR-flash.
+ * @page_size: Page size of NOR-flash.
+ * @base_addr: Base address of NOR-flash.
+ * @erase_cmd: erase command may vary on different flash types
+ * @fast_mode: flash supports read in fast mode
+ */
+struct spear_snor_flash {
+ u32 bank;
+ u32 dev_id;
+ struct mutex lock;
+ struct mtd_info mtd;
+ u32 num_parts;
+ struct mtd_partition *parts;
+ u32 page_size;
+ void __iomem *base_addr;
+ u8 erase_cmd;
+ u8 fast_mode;
+};
+
+static inline struct spear_snor_flash *get_flash_data(struct mtd_info *mtd)
+{
+ return container_of(mtd, struct spear_snor_flash, mtd);
+}
+
+/**
+ * spear_smi_read_sr - Read status register of flash through SMI
+ * @dev: structure of SMI information.
+ * @bank: bank to which flash is connected
+ *
+ * This routine will return the status register of the flash chip present at the
+ * given bank.
+ */
+static int spear_smi_read_sr(struct spear_smi *dev, u32 bank)
+{
+ int ret;
+ u32 ctrlreg1;
+
+ mutex_lock(&dev->lock);
+ dev->status = 0; /* Will be set in interrupt handler */
+
+ ctrlreg1 = readl(dev->io_base + SMI_CR1);
+ /* program smi in hw mode */
+ writel(ctrlreg1 & ~(SW_MODE | WB_MODE), dev->io_base + SMI_CR1);
+
+ /* performing a rsr instruction in hw mode */
+ writel((bank << BANK_SHIFT) | RD_STATUS_REG | TFIE,
+ dev->io_base + SMI_CR2);
+
+ /* wait for tff */
+ ret = wait_event_interruptible_timeout(dev->cmd_complete,
+ dev->status & TFF, SMI_CMD_TIMEOUT);
+
+ /* copy dev->status (lower 16 bits) in order to release lock */
+ if (ret > 0)
+ ret = dev->status & 0xffff;
+ else if (ret == 0)
+ ret = -ETIMEDOUT;
+
+ /* restore the ctrl regs state */
+ writel(ctrlreg1, dev->io_base + SMI_CR1);
+ writel(0, dev->io_base + SMI_CR2);
+ mutex_unlock(&dev->lock);
+
+ return ret;
+}
+
+/**
+ * spear_smi_wait_till_ready - wait till flash is ready
+ * @dev: structure of SMI information.
+ * @bank: flash corresponding to this bank
+ * @timeout: timeout for busy wait condition
+ *
+ * This routine checks for WIP (write in progress) bit in Status register
+ * If successful the routine returns 0 else -EBUSY
+ */
+static int spear_smi_wait_till_ready(struct spear_smi *dev, u32 bank,
+ unsigned long timeout)
+{
+ unsigned long finish;
+ int status;
+
+ finish = jiffies + timeout;
+ do {
+ status = spear_smi_read_sr(dev, bank);
+ if (status < 0) {
+ if (status == -ETIMEDOUT)
+ continue; /* try till finish */
+ return status;
+ } else if (!(status & SR_WIP)) {
+ return 0;
+ }
+
+ cond_resched();
+ } while (!time_after_eq(jiffies, finish));
+
+ dev_err(&dev->pdev->dev, "smi controller is busy, timeout\n");
+ return -EBUSY;
+}
+
+/**
+ * spear_smi_int_handler - SMI Interrupt Handler.
+ * @irq: irq number
+ * @dev_id: structure of SMI device, embedded in dev_id.
+ *
+ * The handler clears all interrupt conditions and records the status in
+ * dev->status which is used by the driver later.
+ */
+static irqreturn_t spear_smi_int_handler(int irq, void *dev_id)
+{
+ u32 status = 0;
+ struct spear_smi *dev = dev_id;
+
+ status = readl(dev->io_base + SMI_SR);
+
+ if (unlikely(!status))
+ return IRQ_NONE;
+
+ /* clear all interrupt conditions */
+ writel(0, dev->io_base + SMI_SR);
+
+ /* copy the status register in dev->status */
+ dev->status |= status;
+
+ /* send the completion */
+ wake_up_interruptible(&dev->cmd_complete);
+
+ return IRQ_HANDLED;
+}
+
+/**
+ * spear_smi_hw_init - initializes the smi controller.
+ * @dev: structure of smi device
+ *
+ * this routine initializes the smi controller wit the default values
+ */
+static void spear_smi_hw_init(struct spear_smi *dev)
+{
+ unsigned long rate = 0;
+ u32 prescale = 0;
+ u32 val;
+
+ rate = clk_get_rate(dev->clk);
+
+ /* functional clock of smi */
+ prescale = DIV_ROUND_UP(rate, dev->clk_rate);
+
+ /*
+ * setting the standard values, fast mode, prescaler for
+ * SMI_MAX_CLOCK_FREQ (50MHz) operation and bank enable
+ */
+ val = HOLD1 | BANK_EN | DSEL_TIME | (prescale << 8);
+
+ mutex_lock(&dev->lock);
+ /* clear all interrupt conditions */
+ writel(0, dev->io_base + SMI_SR);
+
+ writel(val, dev->io_base + SMI_CR1);
+ mutex_unlock(&dev->lock);
+}
+
+/**
+ * get_flash_index - match chip id from a flash list.
+ * @flash_id: a valid nor flash chip id obtained from board.
+ *
+ * try to validate the chip id by matching from a list, if not found then simply
+ * returns negative. In case of success returns index in to the flash devices
+ * array.
+ */
+static int get_flash_index(u32 flash_id)
+{
+ int index;
+
+ /* Matches chip-id to entire list of 'serial-nor flash' ids */
+ for (index = 0; index < ARRAY_SIZE(flash_devices); index++) {
+ if (flash_devices[index].device_id == flash_id)
+ return index;
+ }
+
+ /* Memory chip is not listed and not supported */
+ return -ENODEV;
+}
+
+/**
+ * spear_smi_write_enable - Enable the flash to do write operation
+ * @dev: structure of SMI device
+ * @bank: enable write for flash connected to this bank
+ *
+ * Set write enable latch with Write Enable command.
+ * Returns 0 on success.
+ */
+static int spear_smi_write_enable(struct spear_smi *dev, u32 bank)
+{
+ int ret;
+ u32 ctrlreg1;
+
+ mutex_lock(&dev->lock);
+ dev->status = 0; /* Will be set in interrupt handler */
+
+ ctrlreg1 = readl(dev->io_base + SMI_CR1);
+ /* program smi in h/w mode */
+ writel(ctrlreg1 & ~SW_MODE, dev->io_base + SMI_CR1);
+
+ /* give the flash, write enable command */
+ writel((bank << BANK_SHIFT) | WE | TFIE, dev->io_base + SMI_CR2);
+
+ ret = wait_event_interruptible_timeout(dev->cmd_complete,
+ dev->status & TFF, SMI_CMD_TIMEOUT);
+
+ /* restore the ctrl regs state */
+ writel(ctrlreg1, dev->io_base + SMI_CR1);
+ writel(0, dev->io_base + SMI_CR2);
+
+ if (ret == 0) {
+ ret = -EIO;
+ dev_err(&dev->pdev->dev,
+ "smi controller failed on write enable\n");
+ } else if (ret > 0) {
+ /* check whether write mode status is set for required bank */
+ if (dev->status & (1 << (bank + WM_SHIFT)))
+ ret = 0;
+ else {
+ dev_err(&dev->pdev->dev, "couldn't enable write\n");
+ ret = -EIO;
+ }
+ }
+
+ mutex_unlock(&dev->lock);
+ return ret;
+}
+
+static inline u32
+get_sector_erase_cmd(struct spear_snor_flash *flash, u32 offset)
+{
+ u32 cmd;
+ u8 *x = (u8 *)&cmd;
+
+ x[0] = flash->erase_cmd;
+ x[1] = offset >> 16;
+ x[2] = offset >> 8;
+ x[3] = offset;
+
+ return cmd;
+}
+
+/**
+ * spear_smi_erase_sector - erase one sector of flash
+ * @dev: structure of SMI information
+ * @command: erase command to be send
+ * @bank: bank to which this command needs to be send
+ * @bytes: size of command
+ *
+ * Erase one sector of flash memory at offset ``offset'' which is any
+ * address within the sector which should be erased.
+ * Returns 0 if successful, non-zero otherwise.
+ */
+static int spear_smi_erase_sector(struct spear_smi *dev,
+ u32 bank, u32 command, u32 bytes)
+{
+ u32 ctrlreg1 = 0;
+ int ret;
+
+ ret = spear_smi_wait_till_ready(dev, bank, SMI_MAX_TIME_OUT);
+ if (ret)
+ return ret;
+
+ ret = spear_smi_write_enable(dev, bank);
+ if (ret)
+ return ret;
+
+ mutex_lock(&dev->lock);
+
+ ctrlreg1 = readl(dev->io_base + SMI_CR1);
+ writel((ctrlreg1 | SW_MODE) & ~WB_MODE, dev->io_base + SMI_CR1);
+
+ /* send command in sw mode */
+ writel(command, dev->io_base + SMI_TR);
+
+ writel((bank << BANK_SHIFT) | SEND | TFIE | (bytes << TX_LEN_SHIFT),
+ dev->io_base + SMI_CR2);
+
+ ret = wait_event_interruptible_timeout(dev->cmd_complete,
+ dev->status & TFF, SMI_CMD_TIMEOUT);
+
+ if (ret == 0) {
+ ret = -EIO;
+ dev_err(&dev->pdev->dev, "sector erase failed\n");
+ } else if (ret > 0)
+ ret = 0; /* success */
+
+ /* restore ctrl regs */
+ writel(ctrlreg1, dev->io_base + SMI_CR1);
+ writel(0, dev->io_base + SMI_CR2);
+
+ mutex_unlock(&dev->lock);
+ return ret;
+}
+
+/**
+ * spear_mtd_erase - perform flash erase operation as requested by user
+ * @mtd: Provides the memory characteristics
+ * @e_info: Provides the erase information
+ *
+ * Erase an address range on the flash chip. The address range may extend
+ * one or more erase sectors. Return an error is there is a problem erasing.
+ */
+static int spear_mtd_erase(struct mtd_info *mtd, struct erase_info *e_info)
+{
+ struct spear_snor_flash *flash = get_flash_data(mtd);
+ struct spear_smi *dev = mtd->priv;
+ u32 addr, command, bank;
+ int len, ret;
+
+ if (!flash || !dev)
+ return -ENODEV;
+
+ bank = flash->bank;
+ if (bank > dev->num_flashes - 1) {
+ dev_err(&dev->pdev->dev, "Invalid Bank Num");
+ return -EINVAL;
+ }
+
+ addr = e_info->addr;
+ len = e_info->len;
+
+ mutex_lock(&flash->lock);
+
+ /* now erase sectors in loop */
+ while (len) {
+ command = get_sector_erase_cmd(flash, addr);
+ /* preparing the command for flash */
+ ret = spear_smi_erase_sector(dev, bank, command, 4);
+ if (ret) {
+ e_info->state = MTD_ERASE_FAILED;
+ mutex_unlock(&flash->lock);
+ return ret;
+ }
+ addr += mtd->erasesize;
+ len -= mtd->erasesize;
+ }
+
+ mutex_unlock(&flash->lock);
+ e_info->state = MTD_ERASE_DONE;
+ mtd_erase_callback(e_info);
+
+ return 0;
+}
+
+/**
+ * spear_mtd_read - performs flash read operation as requested by the user
+ * @mtd: MTD information of the memory bank
+ * @from: Address from which to start read
+ * @len: Number of bytes to be read
+ * @retlen: Fills the Number of bytes actually read
+ * @buf: Fills this after reading
+ *
+ * Read an address range from the flash chip. The address range
+ * may be any size provided it is within the physical boundaries.
+ * Returns 0 on success, non zero otherwise
+ */
+static int spear_mtd_read(struct mtd_info *mtd, loff_t from, size_t len,
+ size_t *retlen, u8 *buf)
+{
+ struct spear_snor_flash *flash = get_flash_data(mtd);
+ struct spear_smi *dev = mtd->priv;
+ void __iomem *src;
+ u32 ctrlreg1, val;
+ int ret;
+
+ if (!flash || !dev)
+ return -ENODEV;
+
+ if (flash->bank > dev->num_flashes - 1) {
+ dev_err(&dev->pdev->dev, "Invalid Bank Num");
+ return -EINVAL;
+ }
+
+ /* select address as per bank number */
+ src = flash->base_addr + from;
+
+ mutex_lock(&flash->lock);
+
+ /* wait till previous write/erase is done. */
+ ret = spear_smi_wait_till_ready(dev, flash->bank, SMI_MAX_TIME_OUT);
+ if (ret) {
+ mutex_unlock(&flash->lock);
+ return ret;
+ }
+
+ mutex_lock(&dev->lock);
+ /* put smi in hw mode not wbt mode */
+ ctrlreg1 = val = readl(dev->io_base + SMI_CR1);
+ val &= ~(SW_MODE | WB_MODE);
+ if (flash->fast_mode)
+ val |= FAST_MODE;
+
+ writel(val, dev->io_base + SMI_CR1);
+
+ memcpy_fromio(buf, src, len);
+
+ /* restore ctrl reg1 */
+ writel(ctrlreg1, dev->io_base + SMI_CR1);
+ mutex_unlock(&dev->lock);
+
+ *retlen = len;
+ mutex_unlock(&flash->lock);
+
+ return 0;
+}
+
+static inline int spear_smi_cpy_toio(struct spear_smi *dev, u32 bank,
+ void __iomem *dest, const void *src, size_t len)
+{
+ int ret;
+ u32 ctrlreg1;
+
+ /* wait until finished previous write command. */
+ ret = spear_smi_wait_till_ready(dev, bank, SMI_MAX_TIME_OUT);
+ if (ret)
+ return ret;
+
+ /* put smi in write enable */
+ ret = spear_smi_write_enable(dev, bank);
+ if (ret)
+ return ret;
+
+ /* put smi in hw, write burst mode */
+ mutex_lock(&dev->lock);
+
+ ctrlreg1 = readl(dev->io_base + SMI_CR1);
+ writel((ctrlreg1 | WB_MODE) & ~SW_MODE, dev->io_base + SMI_CR1);
+
+ memcpy_toio(dest, src, len);
+
+ writel(ctrlreg1, dev->io_base + SMI_CR1);
+
+ mutex_unlock(&dev->lock);
+ return 0;
+}
+
+/**
+ * spear_mtd_write - performs write operation as requested by the user.
+ * @mtd: MTD information of the memory bank.
+ * @to: Address to write.
+ * @len: Number of bytes to be written.
+ * @retlen: Number of bytes actually wrote.
+ * @buf: Buffer from which the data to be taken.
+ *
+ * Write an address range to the flash chip. Data must be written in
+ * flash_page_size chunks. The address range may be any size provided
+ * it is within the physical boundaries.
+ * Returns 0 on success, non zero otherwise
+ */
+static int spear_mtd_write(struct mtd_info *mtd, loff_t to, size_t len,
+ size_t *retlen, const u8 *buf)
+{
+ struct spear_snor_flash *flash = get_flash_data(mtd);
+ struct spear_smi *dev = mtd->priv;
+ void __iomem *dest;
+ u32 page_offset, page_size;
+ int ret;
+
+ if (!flash || !dev)
+ return -ENODEV;
+
+ if (flash->bank > dev->num_flashes - 1) {
+ dev_err(&dev->pdev->dev, "Invalid Bank Num");
+ return -EINVAL;
+ }
+
+ /* select address as per bank number */
+ dest = flash->base_addr + to;
+ mutex_lock(&flash->lock);
+
+ page_offset = (u32)to % flash->page_size;
+
+ /* do if all the bytes fit onto one page */
+ if (page_offset + len <= flash->page_size) {
+ ret = spear_smi_cpy_toio(dev, flash->bank, dest, buf, len);
+ if (!ret)
+ *retlen += len;
+ } else {
+ u32 i;
+
+ /* the size of data remaining on the first page */
+ page_size = flash->page_size - page_offset;
+
+ ret = spear_smi_cpy_toio(dev, flash->bank, dest, buf,
+ page_size);
+ if (ret)
+ goto err_write;
+ else
+ *retlen += page_size;
+
+ /* write everything in pagesize chunks */
+ for (i = page_size; i < len; i += page_size) {
+ page_size = len - i;
+ if (page_size > flash->page_size)
+ page_size = flash->page_size;
+
+ ret = spear_smi_cpy_toio(dev, flash->bank, dest + i,
+ buf + i, page_size);
+ if (ret)
+ break;
+ else
+ *retlen += page_size;
+ }
+ }
+
+err_write:
+ mutex_unlock(&flash->lock);
+
+ return ret;
+}
+
+/**
+ * spear_smi_probe_flash - Detects the NOR Flash chip.
+ * @dev: structure of SMI information.
+ * @bank: bank on which flash must be probed
+ *
+ * This routine will check whether there exists a flash chip on a given memory
+ * bank ID.
+ * Return index of the probed flash in flash devices structure
+ */
+static int spear_smi_probe_flash(struct spear_smi *dev, u32 bank)
+{
+ int ret;
+ u32 val = 0;
+
+ ret = spear_smi_wait_till_ready(dev, bank, SMI_PROBE_TIMEOUT);
+ if (ret)
+ return ret;
+
+ mutex_lock(&dev->lock);
+
+ dev->status = 0; /* Will be set in interrupt handler */
+ /* put smi in sw mode */
+ val = readl(dev->io_base + SMI_CR1);
+ writel(val | SW_MODE, dev->io_base + SMI_CR1);
+
+ /* send readid command in sw mode */
+ writel(OPCODE_RDID, dev->io_base + SMI_TR);
+
+ val = (bank << BANK_SHIFT) | SEND | (1 << TX_LEN_SHIFT) |
+ (3 << RX_LEN_SHIFT) | TFIE;
+ writel(val, dev->io_base + SMI_CR2);
+
+ /* wait for TFF */
+ ret = wait_event_interruptible_timeout(dev->cmd_complete,
+ dev->status & TFF, SMI_CMD_TIMEOUT);
+ if (ret <= 0) {
+ ret = -ENODEV;
+ goto err_probe;
+ }
+
+ /* get memory chip id */
+ val = readl(dev->io_base + SMI_RR);
+ val &= 0x00ffffff;
+ ret = get_flash_index(val);
+
+err_probe:
+ /* clear sw mode */
+ val = readl(dev->io_base + SMI_CR1);
+ writel(val & ~SW_MODE, dev->io_base + SMI_CR1);
+
+ mutex_unlock(&dev->lock);
+ return ret;
+}
+
+
+#ifdef CONFIG_OF
+static int spear_smi_probe_config_dt(struct platform_device *pdev,
+ struct device_node *np)
+{
+ struct spear_smi_plat_data *pdata = dev_get_platdata(&pdev->dev);
+ struct device_node *pp = NULL;
+ const __be32 *addr;
+ u32 val;
+ int len;
+ int i = 0;
+
+ if (!np)
+ return -ENODEV;
+
+ of_property_read_u32(np, "clock-rate", &val);
+ pdata->clk_rate = val;
+
+ pdata->board_flash_info = devm_kzalloc(&pdev->dev,
+ sizeof(*pdata->board_flash_info),
+ GFP_KERNEL);
+
+ /* Fill structs for each subnode (flash device) */
+ while ((pp = of_get_next_child(np, pp))) {
+ struct spear_smi_flash_info *flash_info;
+
+ flash_info = &pdata->board_flash_info[i];
+ pdata->np[i] = pp;
+
+ /* Read base-addr and size from DT */
+ addr = of_get_property(pp, "reg", &len);
+ pdata->board_flash_info->mem_base = be32_to_cpup(&addr[0]);
+ pdata->board_flash_info->size = be32_to_cpup(&addr[1]);
+
+ if (of_get_property(pp, "st,smi-fast-mode", NULL))
+ pdata->board_flash_info->fast_mode = 1;
+
+ i++;
+ }
+
+ pdata->num_flashes = i;
+
+ return 0;
+}
+#else
+static int spear_smi_probe_config_dt(struct platform_device *pdev,
+ struct device_node *np)
+{
+ return -ENOSYS;
+}
+#endif
+
+static int spear_smi_setup_banks(struct platform_device *pdev,
+ u32 bank, struct device_node *np)
+{
+ struct spear_smi *dev = platform_get_drvdata(pdev);
+ struct mtd_part_parser_data ppdata = {};
+ struct spear_smi_flash_info *flash_info;
+ struct spear_smi_plat_data *pdata;
+ struct spear_snor_flash *flash;
+ struct mtd_partition *parts = NULL;
+ int count = 0;
+ int flash_index;
+ int ret = 0;
+
+ pdata = dev_get_platdata(&pdev->dev);
+ if (bank > pdata->num_flashes - 1)
+ return -EINVAL;
+
+ flash_info = &pdata->board_flash_info[bank];
+ if (!flash_info)
+ return -ENODEV;
+
+ flash = devm_kzalloc(&pdev->dev, sizeof(*flash), GFP_ATOMIC);
+ if (!flash)
+ return -ENOMEM;
+ flash->bank = bank;
+ flash->fast_mode = flash_info->fast_mode ? 1 : 0;
+ mutex_init(&flash->lock);
+
+ /* verify whether nor flash is really present on board */
+ flash_index = spear_smi_probe_flash(dev, bank);
+ if (flash_index < 0) {
+ dev_info(&dev->pdev->dev, "smi-nor%d not found\n", bank);
+ return flash_index;
+ }
+ /* map the memory for nor flash chip */
+ flash->base_addr = devm_ioremap(&pdev->dev, flash_info->mem_base,
+ flash_info->size);
+ if (!flash->base_addr)
+ return -EIO;
+
+ dev->flash[bank] = flash;
+ flash->mtd.priv = dev;
+
+ if (flash_info->name)
+ flash->mtd.name = flash_info->name;
+ else
+ flash->mtd.name = flash_devices[flash_index].name;
+
+ flash->mtd.type = MTD_NORFLASH;
+ flash->mtd.writesize = 1;
+ flash->mtd.flags = MTD_CAP_NORFLASH;
+ flash->mtd.size = flash_info->size;
+ flash->mtd.erasesize = flash_devices[flash_index].sectorsize;
+ flash->page_size = flash_devices[flash_index].pagesize;
+ flash->mtd.writebufsize = flash->page_size;
+ flash->erase_cmd = flash_devices[flash_index].erase_cmd;
+ flash->mtd._erase = spear_mtd_erase;
+ flash->mtd._read = spear_mtd_read;
+ flash->mtd._write = spear_mtd_write;
+ flash->dev_id = flash_devices[flash_index].device_id;
+
+ dev_info(&dev->pdev->dev, "mtd .name=%s .size=%llx(%lluM)\n",
+ flash->mtd.name, flash->mtd.size,
+ flash->mtd.size / (1024 * 1024));
+
+ dev_info(&dev->pdev->dev, ".erasesize = 0x%x(%uK)\n",
+ flash->mtd.erasesize, flash->mtd.erasesize / 1024);
+
+#ifndef CONFIG_OF
+ if (flash_info->partitions) {
+ parts = flash_info->partitions;
+ count = flash_info->nr_partitions;
+ }
+#endif
+ ppdata.of_node = np;
+
+ ret = mtd_device_parse_register(&flash->mtd, NULL, &ppdata, parts,
+ count);
+ if (ret) {
+ dev_err(&dev->pdev->dev, "Err MTD partition=%d\n", ret);
+ return ret;
+ }
+
+ return 0;
+}
+
+/**
+ * spear_smi_probe - Entry routine
+ * @pdev: platform device structure
+ *
+ * This is the first routine which gets invoked during booting and does all
+ * initialization/allocation work. The routine looks for available memory banks,
+ * and do proper init for any found one.
+ * Returns 0 on success, non zero otherwise
+ */
+static int spear_smi_probe(struct platform_device *pdev)
+{
+ struct device_node *np = pdev->dev.of_node;
+ struct spear_smi_plat_data *pdata = NULL;
+ struct spear_smi *dev;
+ struct resource *smi_base;
+ int irq, ret = 0;
+ int i;
+
+ if (np) {
+ pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
+ if (!pdata) {
+ ret = -ENOMEM;
+ goto err;
+ }
+ pdev->dev.platform_data = pdata;
+ ret = spear_smi_probe_config_dt(pdev, np);
+ if (ret) {
+ ret = -ENODEV;
+ dev_err(&pdev->dev, "no platform data\n");
+ goto err;
+ }
+ } else {
+ pdata = dev_get_platdata(&pdev->dev);
+ if (!pdata) {
+ ret = -ENODEV;
+ dev_err(&pdev->dev, "no platform data\n");
+ goto err;
+ }
+ }
+
+ irq = platform_get_irq(pdev, 0);
+ if (irq < 0) {
+ ret = -ENODEV;
+ dev_err(&pdev->dev, "invalid smi irq\n");
+ goto err;
+ }
+
+ dev = devm_kzalloc(&pdev->dev, sizeof(*dev), GFP_ATOMIC);
+ if (!dev) {
+ ret = -ENOMEM;
+ goto err;
+ }
+
+ smi_base = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+
+ dev->io_base = devm_ioremap_resource(&pdev->dev, smi_base);
+ if (IS_ERR(dev->io_base)) {
+ ret = PTR_ERR(dev->io_base);
+ goto err;
+ }
+
+ dev->pdev = pdev;
+ dev->clk_rate = pdata->clk_rate;
+
+ if (dev->clk_rate > SMI_MAX_CLOCK_FREQ)
+ dev->clk_rate = SMI_MAX_CLOCK_FREQ;
+
+ dev->num_flashes = pdata->num_flashes;
+
+ if (dev->num_flashes > MAX_NUM_FLASH_CHIP) {
+ dev_err(&pdev->dev, "exceeding max number of flashes\n");
+ dev->num_flashes = MAX_NUM_FLASH_CHIP;
+ }
+
+ dev->clk = devm_clk_get(&pdev->dev, NULL);
+ if (IS_ERR(dev->clk)) {
+ ret = PTR_ERR(dev->clk);
+ goto err;
+ }
+
+ ret = clk_prepare_enable(dev->clk);
+ if (ret)
+ goto err;
+
+ ret = devm_request_irq(&pdev->dev, irq, spear_smi_int_handler, 0,
+ pdev->name, dev);
+ if (ret) {
+ dev_err(&dev->pdev->dev, "SMI IRQ allocation failed\n");
+ goto err_irq;
+ }
+
+ mutex_init(&dev->lock);
+ init_waitqueue_head(&dev->cmd_complete);
+ spear_smi_hw_init(dev);
+ platform_set_drvdata(pdev, dev);
+
+ /* loop for each serial nor-flash which is connected to smi */
+ for (i = 0; i < dev->num_flashes; i++) {
+ ret = spear_smi_setup_banks(pdev, i, pdata->np[i]);
+ if (ret) {
+ dev_err(&dev->pdev->dev, "bank setup failed\n");
+ goto err_irq;
+ }
+ }
+
+ return 0;
+
+err_irq:
+ clk_disable_unprepare(dev->clk);
+err:
+ return ret;
+}
+
+/**
+ * spear_smi_remove - Exit routine
+ * @pdev: platform device structure
+ *
+ * free all allocations and delete the partitions.
+ */
+static int spear_smi_remove(struct platform_device *pdev)
+{
+ struct spear_smi *dev;
+ struct spear_snor_flash *flash;
+ int ret, i;
+
+ dev = platform_get_drvdata(pdev);
+ if (!dev) {
+ dev_err(&pdev->dev, "dev is null\n");
+ return -ENODEV;
+ }
+
+ /* clean up for all nor flash */
+ for (i = 0; i < dev->num_flashes; i++) {
+ flash = dev->flash[i];
+ if (!flash)
+ continue;
+
+ /* clean up mtd stuff */
+ ret = mtd_device_unregister(&flash->mtd);
+ if (ret)
+ dev_err(&pdev->dev, "error removing mtd\n");
+ }
+
+ clk_disable_unprepare(dev->clk);
+
+ return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int spear_smi_suspend(struct device *dev)
+{
+ struct spear_smi *sdev = dev_get_drvdata(dev);
+
+ if (sdev && sdev->clk)
+ clk_disable_unprepare(sdev->clk);
+
+ return 0;
+}
+
+static int spear_smi_resume(struct device *dev)
+{
+ struct spear_smi *sdev = dev_get_drvdata(dev);
+ int ret = -EPERM;
+
+ if (sdev && sdev->clk)
+ ret = clk_prepare_enable(sdev->clk);
+
+ if (!ret)
+ spear_smi_hw_init(sdev);
+ return ret;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(spear_smi_pm_ops, spear_smi_suspend, spear_smi_resume);
+
+#ifdef CONFIG_OF
+static const struct of_device_id spear_smi_id_table[] = {
+ { .compatible = "st,spear600-smi" },
+ {}
+};
+MODULE_DEVICE_TABLE(of, spear_smi_id_table);
+#endif
+
+static struct platform_driver spear_smi_driver = {
+ .driver = {
+ .name = "smi",
+ .bus = &platform_bus_type,
+ .of_match_table = of_match_ptr(spear_smi_id_table),
+ .pm = &spear_smi_pm_ops,
+ },
+ .probe = spear_smi_probe,
+ .remove = spear_smi_remove,
+};
+module_platform_driver(spear_smi_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Ashish Priyadarshi, Shiraz Hashim <shiraz.linux.kernel@gmail.com>");
+MODULE_DESCRIPTION("MTD SMI driver for serial nor flash chips");
diff --git a/kernel/drivers/mtd/devices/sst25l.c b/kernel/drivers/mtd/devices/sst25l.c
new file mode 100644
index 000000000..c63ecbcad
--- /dev/null
+++ b/kernel/drivers/mtd/devices/sst25l.c
@@ -0,0 +1,431 @@
+/*
+ * sst25l.c
+ *
+ * Driver for SST25L SPI Flash chips
+ *
+ * Copyright © 2009 Bluewater Systems Ltd
+ * Author: Andre Renaud <andre@bluewatersys.com>
+ * Author: Ryan Mallon
+ *
+ * Based on m25p80.c
+ *
+ * This code is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/mutex.h>
+#include <linux/interrupt.h>
+#include <linux/slab.h>
+#include <linux/sched.h>
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+
+#include <linux/spi/spi.h>
+#include <linux/spi/flash.h>
+
+/* Erases can take up to 3 seconds! */
+#define MAX_READY_WAIT_JIFFIES msecs_to_jiffies(3000)
+
+#define SST25L_CMD_WRSR 0x01 /* Write status register */
+#define SST25L_CMD_WRDI 0x04 /* Write disable */
+#define SST25L_CMD_RDSR 0x05 /* Read status register */
+#define SST25L_CMD_WREN 0x06 /* Write enable */
+#define SST25L_CMD_READ 0x03 /* High speed read */
+
+#define SST25L_CMD_EWSR 0x50 /* Enable write status register */
+#define SST25L_CMD_SECTOR_ERASE 0x20 /* Erase sector */
+#define SST25L_CMD_READ_ID 0x90 /* Read device ID */
+#define SST25L_CMD_AAI_PROGRAM 0xaf /* Auto address increment */
+
+#define SST25L_STATUS_BUSY (1 << 0) /* Chip is busy */
+#define SST25L_STATUS_WREN (1 << 1) /* Write enabled */
+#define SST25L_STATUS_BP0 (1 << 2) /* Block protection 0 */
+#define SST25L_STATUS_BP1 (1 << 3) /* Block protection 1 */
+
+struct sst25l_flash {
+ struct spi_device *spi;
+ struct mutex lock;
+ struct mtd_info mtd;
+};
+
+struct flash_info {
+ const char *name;
+ uint16_t device_id;
+ unsigned page_size;
+ unsigned nr_pages;
+ unsigned erase_size;
+};
+
+#define to_sst25l_flash(x) container_of(x, struct sst25l_flash, mtd)
+
+static struct flash_info sst25l_flash_info[] = {
+ {"sst25lf020a", 0xbf43, 256, 1024, 4096},
+ {"sst25lf040a", 0xbf44, 256, 2048, 4096},
+};
+
+static int sst25l_status(struct sst25l_flash *flash, int *status)
+{
+ struct spi_message m;
+ struct spi_transfer t;
+ unsigned char cmd_resp[2];
+ int err;
+
+ spi_message_init(&m);
+ memset(&t, 0, sizeof(struct spi_transfer));
+
+ cmd_resp[0] = SST25L_CMD_RDSR;
+ cmd_resp[1] = 0xff;
+ t.tx_buf = cmd_resp;
+ t.rx_buf = cmd_resp;
+ t.len = sizeof(cmd_resp);
+ spi_message_add_tail(&t, &m);
+ err = spi_sync(flash->spi, &m);
+ if (err < 0)
+ return err;
+
+ *status = cmd_resp[1];
+ return 0;
+}
+
+static int sst25l_write_enable(struct sst25l_flash *flash, int enable)
+{
+ unsigned char command[2];
+ int status, err;
+
+ command[0] = enable ? SST25L_CMD_WREN : SST25L_CMD_WRDI;
+ err = spi_write(flash->spi, command, 1);
+ if (err)
+ return err;
+
+ command[0] = SST25L_CMD_EWSR;
+ err = spi_write(flash->spi, command, 1);
+ if (err)
+ return err;
+
+ command[0] = SST25L_CMD_WRSR;
+ command[1] = enable ? 0 : SST25L_STATUS_BP0 | SST25L_STATUS_BP1;
+ err = spi_write(flash->spi, command, 2);
+ if (err)
+ return err;
+
+ if (enable) {
+ err = sst25l_status(flash, &status);
+ if (err)
+ return err;
+ if (!(status & SST25L_STATUS_WREN))
+ return -EROFS;
+ }
+
+ return 0;
+}
+
+static int sst25l_wait_till_ready(struct sst25l_flash *flash)
+{
+ unsigned long deadline;
+ int status, err;
+
+ deadline = jiffies + MAX_READY_WAIT_JIFFIES;
+ do {
+ err = sst25l_status(flash, &status);
+ if (err)
+ return err;
+ if (!(status & SST25L_STATUS_BUSY))
+ return 0;
+
+ cond_resched();
+ } while (!time_after_eq(jiffies, deadline));
+
+ return -ETIMEDOUT;
+}
+
+static int sst25l_erase_sector(struct sst25l_flash *flash, uint32_t offset)
+{
+ unsigned char command[4];
+ int err;
+
+ err = sst25l_write_enable(flash, 1);
+ if (err)
+ return err;
+
+ command[0] = SST25L_CMD_SECTOR_ERASE;
+ command[1] = offset >> 16;
+ command[2] = offset >> 8;
+ command[3] = offset;
+ err = spi_write(flash->spi, command, 4);
+ if (err)
+ return err;
+
+ err = sst25l_wait_till_ready(flash);
+ if (err)
+ return err;
+
+ return sst25l_write_enable(flash, 0);
+}
+
+static int sst25l_erase(struct mtd_info *mtd, struct erase_info *instr)
+{
+ struct sst25l_flash *flash = to_sst25l_flash(mtd);
+ uint32_t addr, end;
+ int err;
+
+ /* Sanity checks */
+ if ((uint32_t)instr->len % mtd->erasesize)
+ return -EINVAL;
+
+ if ((uint32_t)instr->addr % mtd->erasesize)
+ return -EINVAL;
+
+ addr = instr->addr;
+ end = addr + instr->len;
+
+ mutex_lock(&flash->lock);
+
+ err = sst25l_wait_till_ready(flash);
+ if (err) {
+ mutex_unlock(&flash->lock);
+ return err;
+ }
+
+ while (addr < end) {
+ err = sst25l_erase_sector(flash, addr);
+ if (err) {
+ mutex_unlock(&flash->lock);
+ instr->state = MTD_ERASE_FAILED;
+ dev_err(&flash->spi->dev, "Erase failed\n");
+ return err;
+ }
+
+ addr += mtd->erasesize;
+ }
+
+ mutex_unlock(&flash->lock);
+
+ instr->state = MTD_ERASE_DONE;
+ mtd_erase_callback(instr);
+ return 0;
+}
+
+static int sst25l_read(struct mtd_info *mtd, loff_t from, size_t len,
+ size_t *retlen, unsigned char *buf)
+{
+ struct sst25l_flash *flash = to_sst25l_flash(mtd);
+ struct spi_transfer transfer[2];
+ struct spi_message message;
+ unsigned char command[4];
+ int ret;
+
+ spi_message_init(&message);
+ memset(&transfer, 0, sizeof(transfer));
+
+ command[0] = SST25L_CMD_READ;
+ command[1] = from >> 16;
+ command[2] = from >> 8;
+ command[3] = from;
+
+ transfer[0].tx_buf = command;
+ transfer[0].len = sizeof(command);
+ spi_message_add_tail(&transfer[0], &message);
+
+ transfer[1].rx_buf = buf;
+ transfer[1].len = len;
+ spi_message_add_tail(&transfer[1], &message);
+
+ mutex_lock(&flash->lock);
+
+ /* Wait for previous write/erase to complete */
+ ret = sst25l_wait_till_ready(flash);
+ if (ret) {
+ mutex_unlock(&flash->lock);
+ return ret;
+ }
+
+ spi_sync(flash->spi, &message);
+
+ if (retlen && message.actual_length > sizeof(command))
+ *retlen += message.actual_length - sizeof(command);
+
+ mutex_unlock(&flash->lock);
+ return 0;
+}
+
+static int sst25l_write(struct mtd_info *mtd, loff_t to, size_t len,
+ size_t *retlen, const unsigned char *buf)
+{
+ struct sst25l_flash *flash = to_sst25l_flash(mtd);
+ int i, j, ret, bytes, copied = 0;
+ unsigned char command[5];
+
+ if ((uint32_t)to % mtd->writesize)
+ return -EINVAL;
+
+ mutex_lock(&flash->lock);
+
+ ret = sst25l_write_enable(flash, 1);
+ if (ret)
+ goto out;
+
+ for (i = 0; i < len; i += mtd->writesize) {
+ ret = sst25l_wait_till_ready(flash);
+ if (ret)
+ goto out;
+
+ /* Write the first byte of the page */
+ command[0] = SST25L_CMD_AAI_PROGRAM;
+ command[1] = (to + i) >> 16;
+ command[2] = (to + i) >> 8;
+ command[3] = (to + i);
+ command[4] = buf[i];
+ ret = spi_write(flash->spi, command, 5);
+ if (ret < 0)
+ goto out;
+ copied++;
+
+ /*
+ * Write the remaining bytes using auto address
+ * increment mode
+ */
+ bytes = min_t(uint32_t, mtd->writesize, len - i);
+ for (j = 1; j < bytes; j++, copied++) {
+ ret = sst25l_wait_till_ready(flash);
+ if (ret)
+ goto out;
+
+ command[1] = buf[i + j];
+ ret = spi_write(flash->spi, command, 2);
+ if (ret)
+ goto out;
+ }
+ }
+
+out:
+ ret = sst25l_write_enable(flash, 0);
+
+ if (retlen)
+ *retlen = copied;
+
+ mutex_unlock(&flash->lock);
+ return ret;
+}
+
+static struct flash_info *sst25l_match_device(struct spi_device *spi)
+{
+ struct flash_info *flash_info = NULL;
+ struct spi_message m;
+ struct spi_transfer t;
+ unsigned char cmd_resp[6];
+ int i, err;
+ uint16_t id;
+
+ spi_message_init(&m);
+ memset(&t, 0, sizeof(struct spi_transfer));
+
+ cmd_resp[0] = SST25L_CMD_READ_ID;
+ cmd_resp[1] = 0;
+ cmd_resp[2] = 0;
+ cmd_resp[3] = 0;
+ cmd_resp[4] = 0xff;
+ cmd_resp[5] = 0xff;
+ t.tx_buf = cmd_resp;
+ t.rx_buf = cmd_resp;
+ t.len = sizeof(cmd_resp);
+ spi_message_add_tail(&t, &m);
+ err = spi_sync(spi, &m);
+ if (err < 0) {
+ dev_err(&spi->dev, "error reading device id\n");
+ return NULL;
+ }
+
+ id = (cmd_resp[4] << 8) | cmd_resp[5];
+
+ for (i = 0; i < ARRAY_SIZE(sst25l_flash_info); i++)
+ if (sst25l_flash_info[i].device_id == id)
+ flash_info = &sst25l_flash_info[i];
+
+ if (!flash_info)
+ dev_err(&spi->dev, "unknown id %.4x\n", id);
+
+ return flash_info;
+}
+
+static int sst25l_probe(struct spi_device *spi)
+{
+ struct flash_info *flash_info;
+ struct sst25l_flash *flash;
+ struct flash_platform_data *data;
+ int ret;
+
+ flash_info = sst25l_match_device(spi);
+ if (!flash_info)
+ return -ENODEV;
+
+ flash = devm_kzalloc(&spi->dev, sizeof(*flash), GFP_KERNEL);
+ if (!flash)
+ return -ENOMEM;
+
+ flash->spi = spi;
+ mutex_init(&flash->lock);
+ spi_set_drvdata(spi, flash);
+
+ data = dev_get_platdata(&spi->dev);
+ if (data && data->name)
+ flash->mtd.name = data->name;
+ else
+ flash->mtd.name = dev_name(&spi->dev);
+
+ flash->mtd.type = MTD_NORFLASH;
+ flash->mtd.flags = MTD_CAP_NORFLASH;
+ flash->mtd.erasesize = flash_info->erase_size;
+ flash->mtd.writesize = flash_info->page_size;
+ flash->mtd.writebufsize = flash_info->page_size;
+ flash->mtd.size = flash_info->page_size * flash_info->nr_pages;
+ flash->mtd._erase = sst25l_erase;
+ flash->mtd._read = sst25l_read;
+ flash->mtd._write = sst25l_write;
+
+ dev_info(&spi->dev, "%s (%lld KiB)\n", flash_info->name,
+ (long long)flash->mtd.size >> 10);
+
+ pr_debug("mtd .name = %s, .size = 0x%llx (%lldMiB) "
+ ".erasesize = 0x%.8x (%uKiB) .numeraseregions = %d\n",
+ flash->mtd.name,
+ (long long)flash->mtd.size, (long long)(flash->mtd.size >> 20),
+ flash->mtd.erasesize, flash->mtd.erasesize / 1024,
+ flash->mtd.numeraseregions);
+
+
+ ret = mtd_device_parse_register(&flash->mtd, NULL, NULL,
+ data ? data->parts : NULL,
+ data ? data->nr_parts : 0);
+ if (ret)
+ return -ENODEV;
+
+ return 0;
+}
+
+static int sst25l_remove(struct spi_device *spi)
+{
+ struct sst25l_flash *flash = spi_get_drvdata(spi);
+
+ return mtd_device_unregister(&flash->mtd);
+}
+
+static struct spi_driver sst25l_driver = {
+ .driver = {
+ .name = "sst25l",
+ .owner = THIS_MODULE,
+ },
+ .probe = sst25l_probe,
+ .remove = sst25l_remove,
+};
+
+module_spi_driver(sst25l_driver);
+
+MODULE_DESCRIPTION("MTD SPI driver for SST25L Flash chips");
+MODULE_AUTHOR("Andre Renaud <andre@bluewatersys.com>, "
+ "Ryan Mallon");
+MODULE_LICENSE("GPL");
diff --git a/kernel/drivers/mtd/devices/st_spi_fsm.c b/kernel/drivers/mtd/devices/st_spi_fsm.c
new file mode 100644
index 000000000..3060025c8
--- /dev/null
+++ b/kernel/drivers/mtd/devices/st_spi_fsm.c
@@ -0,0 +1,2178 @@
+/*
+ * st_spi_fsm.c - ST Fast Sequence Mode (FSM) Serial Flash Controller
+ *
+ * Author: Angus Clark <angus.clark@st.com>
+ *
+ * Copyright (C) 2010-2014 STMicroelectronics Limited
+ *
+ * JEDEC probe based on drivers/mtd/devices/m25p80.c
+ *
+ * This code is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/regmap.h>
+#include <linux/platform_device.h>
+#include <linux/mfd/syscon.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/spi-nor.h>
+#include <linux/sched.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/clk.h>
+
+#include "serial_flash_cmds.h"
+
+/*
+ * FSM SPI Controller Registers
+ */
+#define SPI_CLOCKDIV 0x0010
+#define SPI_MODESELECT 0x0018
+#define SPI_CONFIGDATA 0x0020
+#define SPI_STA_MODE_CHANGE 0x0028
+#define SPI_FAST_SEQ_TRANSFER_SIZE 0x0100
+#define SPI_FAST_SEQ_ADD1 0x0104
+#define SPI_FAST_SEQ_ADD2 0x0108
+#define SPI_FAST_SEQ_ADD_CFG 0x010c
+#define SPI_FAST_SEQ_OPC1 0x0110
+#define SPI_FAST_SEQ_OPC2 0x0114
+#define SPI_FAST_SEQ_OPC3 0x0118
+#define SPI_FAST_SEQ_OPC4 0x011c
+#define SPI_FAST_SEQ_OPC5 0x0120
+#define SPI_MODE_BITS 0x0124
+#define SPI_DUMMY_BITS 0x0128
+#define SPI_FAST_SEQ_FLASH_STA_DATA 0x012c
+#define SPI_FAST_SEQ_1 0x0130
+#define SPI_FAST_SEQ_2 0x0134
+#define SPI_FAST_SEQ_3 0x0138
+#define SPI_FAST_SEQ_4 0x013c
+#define SPI_FAST_SEQ_CFG 0x0140
+#define SPI_FAST_SEQ_STA 0x0144
+#define SPI_QUAD_BOOT_SEQ_INIT_1 0x0148
+#define SPI_QUAD_BOOT_SEQ_INIT_2 0x014c
+#define SPI_QUAD_BOOT_READ_SEQ_1 0x0150
+#define SPI_QUAD_BOOT_READ_SEQ_2 0x0154
+#define SPI_PROGRAM_ERASE_TIME 0x0158
+#define SPI_MULT_PAGE_REPEAT_SEQ_1 0x015c
+#define SPI_MULT_PAGE_REPEAT_SEQ_2 0x0160
+#define SPI_STATUS_WR_TIME_REG 0x0164
+#define SPI_FAST_SEQ_DATA_REG 0x0300
+
+/*
+ * Register: SPI_MODESELECT
+ */
+#define SPI_MODESELECT_CONTIG 0x01
+#define SPI_MODESELECT_FASTREAD 0x02
+#define SPI_MODESELECT_DUALIO 0x04
+#define SPI_MODESELECT_FSM 0x08
+#define SPI_MODESELECT_QUADBOOT 0x10
+
+/*
+ * Register: SPI_CONFIGDATA
+ */
+#define SPI_CFG_DEVICE_ST 0x1
+#define SPI_CFG_DEVICE_ATMEL 0x4
+#define SPI_CFG_MIN_CS_HIGH(x) (((x) & 0xfff) << 4)
+#define SPI_CFG_CS_SETUPHOLD(x) (((x) & 0xff) << 16)
+#define SPI_CFG_DATA_HOLD(x) (((x) & 0xff) << 24)
+
+#define SPI_CFG_DEFAULT_MIN_CS_HIGH SPI_CFG_MIN_CS_HIGH(0x0AA)
+#define SPI_CFG_DEFAULT_CS_SETUPHOLD SPI_CFG_CS_SETUPHOLD(0xA0)
+#define SPI_CFG_DEFAULT_DATA_HOLD SPI_CFG_DATA_HOLD(0x00)
+
+/*
+ * Register: SPI_FAST_SEQ_TRANSFER_SIZE
+ */
+#define TRANSFER_SIZE(x) ((x) * 8)
+
+/*
+ * Register: SPI_FAST_SEQ_ADD_CFG
+ */
+#define ADR_CFG_CYCLES_ADD1(x) ((x) << 0)
+#define ADR_CFG_PADS_1_ADD1 (0x0 << 6)
+#define ADR_CFG_PADS_2_ADD1 (0x1 << 6)
+#define ADR_CFG_PADS_4_ADD1 (0x3 << 6)
+#define ADR_CFG_CSDEASSERT_ADD1 (1 << 8)
+#define ADR_CFG_CYCLES_ADD2(x) ((x) << (0+16))
+#define ADR_CFG_PADS_1_ADD2 (0x0 << (6+16))
+#define ADR_CFG_PADS_2_ADD2 (0x1 << (6+16))
+#define ADR_CFG_PADS_4_ADD2 (0x3 << (6+16))
+#define ADR_CFG_CSDEASSERT_ADD2 (1 << (8+16))
+
+/*
+ * Register: SPI_FAST_SEQ_n
+ */
+#define SEQ_OPC_OPCODE(x) ((x) << 0)
+#define SEQ_OPC_CYCLES(x) ((x) << 8)
+#define SEQ_OPC_PADS_1 (0x0 << 14)
+#define SEQ_OPC_PADS_2 (0x1 << 14)
+#define SEQ_OPC_PADS_4 (0x3 << 14)
+#define SEQ_OPC_CSDEASSERT (1 << 16)
+
+/*
+ * Register: SPI_FAST_SEQ_CFG
+ */
+#define SEQ_CFG_STARTSEQ (1 << 0)
+#define SEQ_CFG_SWRESET (1 << 5)
+#define SEQ_CFG_CSDEASSERT (1 << 6)
+#define SEQ_CFG_READNOTWRITE (1 << 7)
+#define SEQ_CFG_ERASE (1 << 8)
+#define SEQ_CFG_PADS_1 (0x0 << 16)
+#define SEQ_CFG_PADS_2 (0x1 << 16)
+#define SEQ_CFG_PADS_4 (0x3 << 16)
+
+/*
+ * Register: SPI_MODE_BITS
+ */
+#define MODE_DATA(x) (x & 0xff)
+#define MODE_CYCLES(x) ((x & 0x3f) << 16)
+#define MODE_PADS_1 (0x0 << 22)
+#define MODE_PADS_2 (0x1 << 22)
+#define MODE_PADS_4 (0x3 << 22)
+#define DUMMY_CSDEASSERT (1 << 24)
+
+/*
+ * Register: SPI_DUMMY_BITS
+ */
+#define DUMMY_CYCLES(x) ((x & 0x3f) << 16)
+#define DUMMY_PADS_1 (0x0 << 22)
+#define DUMMY_PADS_2 (0x1 << 22)
+#define DUMMY_PADS_4 (0x3 << 22)
+#define DUMMY_CSDEASSERT (1 << 24)
+
+/*
+ * Register: SPI_FAST_SEQ_FLASH_STA_DATA
+ */
+#define STA_DATA_BYTE1(x) ((x & 0xff) << 0)
+#define STA_DATA_BYTE2(x) ((x & 0xff) << 8)
+#define STA_PADS_1 (0x0 << 16)
+#define STA_PADS_2 (0x1 << 16)
+#define STA_PADS_4 (0x3 << 16)
+#define STA_CSDEASSERT (0x1 << 20)
+#define STA_RDNOTWR (0x1 << 21)
+
+/*
+ * FSM SPI Instruction Opcodes
+ */
+#define STFSM_OPC_CMD 0x1
+#define STFSM_OPC_ADD 0x2
+#define STFSM_OPC_STA 0x3
+#define STFSM_OPC_MODE 0x4
+#define STFSM_OPC_DUMMY 0x5
+#define STFSM_OPC_DATA 0x6
+#define STFSM_OPC_WAIT 0x7
+#define STFSM_OPC_JUMP 0x8
+#define STFSM_OPC_GOTO 0x9
+#define STFSM_OPC_STOP 0xF
+
+/*
+ * FSM SPI Instructions (== opcode + operand).
+ */
+#define STFSM_INSTR(cmd, op) ((cmd) | ((op) << 4))
+
+#define STFSM_INST_CMD1 STFSM_INSTR(STFSM_OPC_CMD, 1)
+#define STFSM_INST_CMD2 STFSM_INSTR(STFSM_OPC_CMD, 2)
+#define STFSM_INST_CMD3 STFSM_INSTR(STFSM_OPC_CMD, 3)
+#define STFSM_INST_CMD4 STFSM_INSTR(STFSM_OPC_CMD, 4)
+#define STFSM_INST_CMD5 STFSM_INSTR(STFSM_OPC_CMD, 5)
+#define STFSM_INST_ADD1 STFSM_INSTR(STFSM_OPC_ADD, 1)
+#define STFSM_INST_ADD2 STFSM_INSTR(STFSM_OPC_ADD, 2)
+
+#define STFSM_INST_DATA_WRITE STFSM_INSTR(STFSM_OPC_DATA, 1)
+#define STFSM_INST_DATA_READ STFSM_INSTR(STFSM_OPC_DATA, 2)
+
+#define STFSM_INST_STA_RD1 STFSM_INSTR(STFSM_OPC_STA, 0x1)
+#define STFSM_INST_STA_WR1 STFSM_INSTR(STFSM_OPC_STA, 0x1)
+#define STFSM_INST_STA_RD2 STFSM_INSTR(STFSM_OPC_STA, 0x2)
+#define STFSM_INST_STA_WR1_2 STFSM_INSTR(STFSM_OPC_STA, 0x3)
+
+#define STFSM_INST_MODE STFSM_INSTR(STFSM_OPC_MODE, 0)
+#define STFSM_INST_DUMMY STFSM_INSTR(STFSM_OPC_DUMMY, 0)
+#define STFSM_INST_WAIT STFSM_INSTR(STFSM_OPC_WAIT, 0)
+#define STFSM_INST_STOP STFSM_INSTR(STFSM_OPC_STOP, 0)
+
+#define STFSM_DEFAULT_EMI_FREQ 100000000UL /* 100 MHz */
+#define STFSM_DEFAULT_WR_TIME (STFSM_DEFAULT_EMI_FREQ * (15/1000)) /* 15ms */
+
+#define STFSM_FLASH_SAFE_FREQ 10000000UL /* 10 MHz */
+
+#define STFSM_MAX_WAIT_SEQ_MS 1000 /* FSM execution time */
+
+/* S25FLxxxS commands */
+#define S25FL_CMD_WRITE4_1_1_4 0x34
+#define S25FL_CMD_SE4 0xdc
+#define S25FL_CMD_CLSR 0x30
+#define S25FL_CMD_DYBWR 0xe1
+#define S25FL_CMD_DYBRD 0xe0
+#define S25FL_CMD_WRITE4 0x12 /* Note, opcode clashes with
+ * 'SPINOR_OP_WRITE_1_4_4'
+ * as found on N25Qxxx devices! */
+
+/* Status register */
+#define FLASH_STATUS_BUSY 0x01
+#define FLASH_STATUS_WEL 0x02
+#define FLASH_STATUS_BP0 0x04
+#define FLASH_STATUS_BP1 0x08
+#define FLASH_STATUS_BP2 0x10
+#define FLASH_STATUS_SRWP0 0x80
+#define FLASH_STATUS_TIMEOUT 0xff
+/* S25FL Error Flags */
+#define S25FL_STATUS_E_ERR 0x20
+#define S25FL_STATUS_P_ERR 0x40
+
+#define N25Q_CMD_WRVCR 0x81
+#define N25Q_CMD_RDVCR 0x85
+#define N25Q_CMD_RDVECR 0x65
+#define N25Q_CMD_RDNVCR 0xb5
+#define N25Q_CMD_WRNVCR 0xb1
+
+#define FLASH_PAGESIZE 256 /* In Bytes */
+#define FLASH_PAGESIZE_32 (FLASH_PAGESIZE / 4) /* In uint32_t */
+#define FLASH_MAX_BUSY_WAIT (300 * HZ) /* Maximum 'CHIPERASE' time */
+
+/*
+ * Flags to tweak operation of default read/write/erase routines
+ */
+#define CFG_READ_TOGGLE_32BIT_ADDR 0x00000001
+#define CFG_WRITE_TOGGLE_32BIT_ADDR 0x00000002
+#define CFG_ERASESEC_TOGGLE_32BIT_ADDR 0x00000008
+#define CFG_S25FL_CHECK_ERROR_FLAGS 0x00000010
+
+struct stfsm_seq {
+ uint32_t data_size;
+ uint32_t addr1;
+ uint32_t addr2;
+ uint32_t addr_cfg;
+ uint32_t seq_opc[5];
+ uint32_t mode;
+ uint32_t dummy;
+ uint32_t status;
+ uint8_t seq[16];
+ uint32_t seq_cfg;
+} __packed __aligned(4);
+
+struct stfsm {
+ struct device *dev;
+ void __iomem *base;
+ struct resource *region;
+ struct mtd_info mtd;
+ struct mutex lock;
+ struct flash_info *info;
+ struct clk *clk;
+
+ uint32_t configuration;
+ uint32_t fifo_dir_delay;
+ bool booted_from_spi;
+ bool reset_signal;
+ bool reset_por;
+
+ struct stfsm_seq stfsm_seq_read;
+ struct stfsm_seq stfsm_seq_write;
+ struct stfsm_seq stfsm_seq_en_32bit_addr;
+};
+
+/* Parameters to configure a READ or WRITE FSM sequence */
+struct seq_rw_config {
+ uint32_t flags; /* flags to support config */
+ uint8_t cmd; /* FLASH command */
+ int write; /* Write Sequence */
+ uint8_t addr_pads; /* No. of addr pads (MODE & DUMMY) */
+ uint8_t data_pads; /* No. of data pads */
+ uint8_t mode_data; /* MODE data */
+ uint8_t mode_cycles; /* No. of MODE cycles */
+ uint8_t dummy_cycles; /* No. of DUMMY cycles */
+};
+
+/* SPI Flash Device Table */
+struct flash_info {
+ char *name;
+ /*
+ * JEDEC id zero means "no ID" (most older chips); otherwise it has
+ * a high byte of zero plus three data bytes: the manufacturer id,
+ * then a two byte device id.
+ */
+ u32 jedec_id;
+ u16 ext_id;
+ /*
+ * The size listed here is what works with SPINOR_OP_SE, which isn't
+ * necessarily called a "sector" by the vendor.
+ */
+ unsigned sector_size;
+ u16 n_sectors;
+ u32 flags;
+ /*
+ * Note, where FAST_READ is supported, freq_max specifies the
+ * FAST_READ frequency, not the READ frequency.
+ */
+ u32 max_freq;
+ int (*config)(struct stfsm *);
+};
+
+static int stfsm_n25q_config(struct stfsm *fsm);
+static int stfsm_mx25_config(struct stfsm *fsm);
+static int stfsm_s25fl_config(struct stfsm *fsm);
+static int stfsm_w25q_config(struct stfsm *fsm);
+
+static struct flash_info flash_types[] = {
+ /*
+ * ST Microelectronics/Numonyx --
+ * (newer production versions may have feature updates
+ * (eg faster operating frequency)
+ */
+#define M25P_FLAG (FLASH_FLAG_READ_WRITE | FLASH_FLAG_READ_FAST)
+ { "m25p40", 0x202013, 0, 64 * 1024, 8, M25P_FLAG, 25, NULL },
+ { "m25p80", 0x202014, 0, 64 * 1024, 16, M25P_FLAG, 25, NULL },
+ { "m25p16", 0x202015, 0, 64 * 1024, 32, M25P_FLAG, 25, NULL },
+ { "m25p32", 0x202016, 0, 64 * 1024, 64, M25P_FLAG, 50, NULL },
+ { "m25p64", 0x202017, 0, 64 * 1024, 128, M25P_FLAG, 50, NULL },
+ { "m25p128", 0x202018, 0, 256 * 1024, 64, M25P_FLAG, 50, NULL },
+
+#define M25PX_FLAG (FLASH_FLAG_READ_WRITE | \
+ FLASH_FLAG_READ_FAST | \
+ FLASH_FLAG_READ_1_1_2 | \
+ FLASH_FLAG_WRITE_1_1_2)
+ { "m25px32", 0x207116, 0, 64 * 1024, 64, M25PX_FLAG, 75, NULL },
+ { "m25px64", 0x207117, 0, 64 * 1024, 128, M25PX_FLAG, 75, NULL },
+
+ /* Macronix MX25xxx
+ * - Support for 'FLASH_FLAG_WRITE_1_4_4' is omitted for devices
+ * where operating frequency must be reduced.
+ */
+#define MX25_FLAG (FLASH_FLAG_READ_WRITE | \
+ FLASH_FLAG_READ_FAST | \
+ FLASH_FLAG_READ_1_1_2 | \
+ FLASH_FLAG_READ_1_2_2 | \
+ FLASH_FLAG_READ_1_1_4 | \
+ FLASH_FLAG_SE_4K | \
+ FLASH_FLAG_SE_32K)
+ { "mx25l3255e", 0xc29e16, 0, 64 * 1024, 64,
+ (MX25_FLAG | FLASH_FLAG_WRITE_1_4_4), 86,
+ stfsm_mx25_config},
+ { "mx25l25635e", 0xc22019, 0, 64*1024, 512,
+ (MX25_FLAG | FLASH_FLAG_32BIT_ADDR | FLASH_FLAG_RESET), 70,
+ stfsm_mx25_config },
+ { "mx25l25655e", 0xc22619, 0, 64*1024, 512,
+ (MX25_FLAG | FLASH_FLAG_32BIT_ADDR | FLASH_FLAG_RESET), 70,
+ stfsm_mx25_config},
+
+#define N25Q_FLAG (FLASH_FLAG_READ_WRITE | \
+ FLASH_FLAG_READ_FAST | \
+ FLASH_FLAG_READ_1_1_2 | \
+ FLASH_FLAG_READ_1_2_2 | \
+ FLASH_FLAG_READ_1_1_4 | \
+ FLASH_FLAG_READ_1_4_4 | \
+ FLASH_FLAG_WRITE_1_1_2 | \
+ FLASH_FLAG_WRITE_1_2_2 | \
+ FLASH_FLAG_WRITE_1_1_4 | \
+ FLASH_FLAG_WRITE_1_4_4)
+ { "n25q128", 0x20ba18, 0, 64 * 1024, 256, N25Q_FLAG, 108,
+ stfsm_n25q_config },
+ { "n25q256", 0x20ba19, 0, 64 * 1024, 512,
+ N25Q_FLAG | FLASH_FLAG_32BIT_ADDR, 108, stfsm_n25q_config },
+
+ /*
+ * Spansion S25FLxxxP
+ * - 256KiB and 64KiB sector variants (identified by ext. JEDEC)
+ */
+#define S25FLXXXP_FLAG (FLASH_FLAG_READ_WRITE | \
+ FLASH_FLAG_READ_1_1_2 | \
+ FLASH_FLAG_READ_1_2_2 | \
+ FLASH_FLAG_READ_1_1_4 | \
+ FLASH_FLAG_READ_1_4_4 | \
+ FLASH_FLAG_WRITE_1_1_4 | \
+ FLASH_FLAG_READ_FAST)
+ { "s25fl032p", 0x010215, 0x4d00, 64 * 1024, 64, S25FLXXXP_FLAG, 80,
+ stfsm_s25fl_config},
+ { "s25fl129p0", 0x012018, 0x4d00, 256 * 1024, 64, S25FLXXXP_FLAG, 80,
+ stfsm_s25fl_config },
+ { "s25fl129p1", 0x012018, 0x4d01, 64 * 1024, 256, S25FLXXXP_FLAG, 80,
+ stfsm_s25fl_config },
+
+ /*
+ * Spansion S25FLxxxS
+ * - 256KiB and 64KiB sector variants (identified by ext. JEDEC)
+ * - RESET# signal supported by die but not bristled out on all
+ * package types. The package type is a function of board design,
+ * so this information is captured in the board's flags.
+ * - Supports 'DYB' sector protection. Depending on variant, sectors
+ * may default to locked state on power-on.
+ */
+#define S25FLXXXS_FLAG (S25FLXXXP_FLAG | \
+ FLASH_FLAG_RESET | \
+ FLASH_FLAG_DYB_LOCKING)
+ { "s25fl128s0", 0x012018, 0x0300, 256 * 1024, 64, S25FLXXXS_FLAG, 80,
+ stfsm_s25fl_config },
+ { "s25fl128s1", 0x012018, 0x0301, 64 * 1024, 256, S25FLXXXS_FLAG, 80,
+ stfsm_s25fl_config },
+ { "s25fl256s0", 0x010219, 0x4d00, 256 * 1024, 128,
+ S25FLXXXS_FLAG | FLASH_FLAG_32BIT_ADDR, 80, stfsm_s25fl_config },
+ { "s25fl256s1", 0x010219, 0x4d01, 64 * 1024, 512,
+ S25FLXXXS_FLAG | FLASH_FLAG_32BIT_ADDR, 80, stfsm_s25fl_config },
+
+ /* Winbond -- w25x "blocks" are 64K, "sectors" are 4KiB */
+#define W25X_FLAG (FLASH_FLAG_READ_WRITE | \
+ FLASH_FLAG_READ_FAST | \
+ FLASH_FLAG_READ_1_1_2 | \
+ FLASH_FLAG_WRITE_1_1_2)
+ { "w25x40", 0xef3013, 0, 64 * 1024, 8, W25X_FLAG, 75, NULL },
+ { "w25x80", 0xef3014, 0, 64 * 1024, 16, W25X_FLAG, 75, NULL },
+ { "w25x16", 0xef3015, 0, 64 * 1024, 32, W25X_FLAG, 75, NULL },
+ { "w25x32", 0xef3016, 0, 64 * 1024, 64, W25X_FLAG, 75, NULL },
+ { "w25x64", 0xef3017, 0, 64 * 1024, 128, W25X_FLAG, 75, NULL },
+
+ /* Winbond -- w25q "blocks" are 64K, "sectors" are 4KiB */
+#define W25Q_FLAG (FLASH_FLAG_READ_WRITE | \
+ FLASH_FLAG_READ_FAST | \
+ FLASH_FLAG_READ_1_1_2 | \
+ FLASH_FLAG_READ_1_2_2 | \
+ FLASH_FLAG_READ_1_1_4 | \
+ FLASH_FLAG_READ_1_4_4 | \
+ FLASH_FLAG_WRITE_1_1_4)
+ { "w25q80", 0xef4014, 0, 64 * 1024, 16, W25Q_FLAG, 80,
+ stfsm_w25q_config },
+ { "w25q16", 0xef4015, 0, 64 * 1024, 32, W25Q_FLAG, 80,
+ stfsm_w25q_config },
+ { "w25q32", 0xef4016, 0, 64 * 1024, 64, W25Q_FLAG, 80,
+ stfsm_w25q_config },
+ { "w25q64", 0xef4017, 0, 64 * 1024, 128, W25Q_FLAG, 80,
+ stfsm_w25q_config },
+
+ /* Sentinel */
+ { NULL, 0x000000, 0, 0, 0, 0, 0, NULL },
+};
+
+/*
+ * FSM message sequence configurations:
+ *
+ * All configs are presented in order of preference
+ */
+
+/* Default READ configurations, in order of preference */
+static struct seq_rw_config default_read_configs[] = {
+ {FLASH_FLAG_READ_1_4_4, SPINOR_OP_READ_1_4_4, 0, 4, 4, 0x00, 2, 4},
+ {FLASH_FLAG_READ_1_1_4, SPINOR_OP_READ_1_1_4, 0, 1, 4, 0x00, 4, 0},
+ {FLASH_FLAG_READ_1_2_2, SPINOR_OP_READ_1_2_2, 0, 2, 2, 0x00, 4, 0},
+ {FLASH_FLAG_READ_1_1_2, SPINOR_OP_READ_1_1_2, 0, 1, 2, 0x00, 0, 8},
+ {FLASH_FLAG_READ_FAST, SPINOR_OP_READ_FAST, 0, 1, 1, 0x00, 0, 8},
+ {FLASH_FLAG_READ_WRITE, SPINOR_OP_READ, 0, 1, 1, 0x00, 0, 0},
+ {0x00, 0, 0, 0, 0, 0x00, 0, 0},
+};
+
+/* Default WRITE configurations */
+static struct seq_rw_config default_write_configs[] = {
+ {FLASH_FLAG_WRITE_1_4_4, SPINOR_OP_WRITE_1_4_4, 1, 4, 4, 0x00, 0, 0},
+ {FLASH_FLAG_WRITE_1_1_4, SPINOR_OP_WRITE_1_1_4, 1, 1, 4, 0x00, 0, 0},
+ {FLASH_FLAG_WRITE_1_2_2, SPINOR_OP_WRITE_1_2_2, 1, 2, 2, 0x00, 0, 0},
+ {FLASH_FLAG_WRITE_1_1_2, SPINOR_OP_WRITE_1_1_2, 1, 1, 2, 0x00, 0, 0},
+ {FLASH_FLAG_READ_WRITE, SPINOR_OP_WRITE, 1, 1, 1, 0x00, 0, 0},
+ {0x00, 0, 0, 0, 0, 0x00, 0, 0},
+};
+
+/*
+ * [N25Qxxx] Configuration
+ */
+#define N25Q_VCR_DUMMY_CYCLES(x) (((x) & 0xf) << 4)
+#define N25Q_VCR_XIP_DISABLED ((uint8_t)0x1 << 3)
+#define N25Q_VCR_WRAP_CONT 0x3
+
+/* N25Q 3-byte Address READ configurations
+ * - 'FAST' variants configured for 8 dummy cycles.
+ *
+ * Note, the number of dummy cycles used for 'FAST' READ operations is
+ * configurable and would normally be tuned according to the READ command and
+ * operating frequency. However, this applies universally to all 'FAST' READ
+ * commands, including those used by the SPIBoot controller, and remains in
+ * force until the device is power-cycled. Since the SPIBoot controller is
+ * hard-wired to use 8 dummy cycles, we must configure the device to also use 8
+ * cycles.
+ */
+static struct seq_rw_config n25q_read3_configs[] = {
+ {FLASH_FLAG_READ_1_4_4, SPINOR_OP_READ_1_4_4, 0, 4, 4, 0x00, 0, 8},
+ {FLASH_FLAG_READ_1_1_4, SPINOR_OP_READ_1_1_4, 0, 1, 4, 0x00, 0, 8},
+ {FLASH_FLAG_READ_1_2_2, SPINOR_OP_READ_1_2_2, 0, 2, 2, 0x00, 0, 8},
+ {FLASH_FLAG_READ_1_1_2, SPINOR_OP_READ_1_1_2, 0, 1, 2, 0x00, 0, 8},
+ {FLASH_FLAG_READ_FAST, SPINOR_OP_READ_FAST, 0, 1, 1, 0x00, 0, 8},
+ {FLASH_FLAG_READ_WRITE, SPINOR_OP_READ, 0, 1, 1, 0x00, 0, 0},
+ {0x00, 0, 0, 0, 0, 0x00, 0, 0},
+};
+
+/* N25Q 4-byte Address READ configurations
+ * - use special 4-byte address READ commands (reduces overheads, and
+ * reduces risk of hitting watchdog reset issues).
+ * - 'FAST' variants configured for 8 dummy cycles (see note above.)
+ */
+static struct seq_rw_config n25q_read4_configs[] = {
+ {FLASH_FLAG_READ_1_4_4, SPINOR_OP_READ4_1_4_4, 0, 4, 4, 0x00, 0, 8},
+ {FLASH_FLAG_READ_1_1_4, SPINOR_OP_READ4_1_1_4, 0, 1, 4, 0x00, 0, 8},
+ {FLASH_FLAG_READ_1_2_2, SPINOR_OP_READ4_1_2_2, 0, 2, 2, 0x00, 0, 8},
+ {FLASH_FLAG_READ_1_1_2, SPINOR_OP_READ4_1_1_2, 0, 1, 2, 0x00, 0, 8},
+ {FLASH_FLAG_READ_FAST, SPINOR_OP_READ4_FAST, 0, 1, 1, 0x00, 0, 8},
+ {FLASH_FLAG_READ_WRITE, SPINOR_OP_READ4, 0, 1, 1, 0x00, 0, 0},
+ {0x00, 0, 0, 0, 0, 0x00, 0, 0},
+};
+
+/*
+ * [MX25xxx] Configuration
+ */
+#define MX25_STATUS_QE (0x1 << 6)
+
+static int stfsm_mx25_en_32bit_addr_seq(struct stfsm_seq *seq)
+{
+ seq->seq_opc[0] = (SEQ_OPC_PADS_1 |
+ SEQ_OPC_CYCLES(8) |
+ SEQ_OPC_OPCODE(SPINOR_OP_EN4B) |
+ SEQ_OPC_CSDEASSERT);
+
+ seq->seq[0] = STFSM_INST_CMD1;
+ seq->seq[1] = STFSM_INST_WAIT;
+ seq->seq[2] = STFSM_INST_STOP;
+
+ seq->seq_cfg = (SEQ_CFG_PADS_1 |
+ SEQ_CFG_ERASE |
+ SEQ_CFG_READNOTWRITE |
+ SEQ_CFG_CSDEASSERT |
+ SEQ_CFG_STARTSEQ);
+
+ return 0;
+}
+
+/*
+ * [S25FLxxx] Configuration
+ */
+#define STFSM_S25FL_CONFIG_QE (0x1 << 1)
+
+/*
+ * S25FLxxxS devices provide three ways of supporting 32-bit addressing: Bank
+ * Register, Extended Address Modes, and a 32-bit address command set. The
+ * 32-bit address command set is used here, since it avoids any problems with
+ * entering a state that is incompatible with the SPIBoot Controller.
+ */
+static struct seq_rw_config stfsm_s25fl_read4_configs[] = {
+ {FLASH_FLAG_READ_1_4_4, SPINOR_OP_READ4_1_4_4, 0, 4, 4, 0x00, 2, 4},
+ {FLASH_FLAG_READ_1_1_4, SPINOR_OP_READ4_1_1_4, 0, 1, 4, 0x00, 0, 8},
+ {FLASH_FLAG_READ_1_2_2, SPINOR_OP_READ4_1_2_2, 0, 2, 2, 0x00, 4, 0},
+ {FLASH_FLAG_READ_1_1_2, SPINOR_OP_READ4_1_1_2, 0, 1, 2, 0x00, 0, 8},
+ {FLASH_FLAG_READ_FAST, SPINOR_OP_READ4_FAST, 0, 1, 1, 0x00, 0, 8},
+ {FLASH_FLAG_READ_WRITE, SPINOR_OP_READ4, 0, 1, 1, 0x00, 0, 0},
+ {0x00, 0, 0, 0, 0, 0x00, 0, 0},
+};
+
+static struct seq_rw_config stfsm_s25fl_write4_configs[] = {
+ {FLASH_FLAG_WRITE_1_1_4, S25FL_CMD_WRITE4_1_1_4, 1, 1, 4, 0x00, 0, 0},
+ {FLASH_FLAG_READ_WRITE, S25FL_CMD_WRITE4, 1, 1, 1, 0x00, 0, 0},
+ {0x00, 0, 0, 0, 0, 0x00, 0, 0},
+};
+
+/*
+ * [W25Qxxx] Configuration
+ */
+#define W25Q_STATUS_QE (0x1 << 1)
+
+static struct stfsm_seq stfsm_seq_read_jedec = {
+ .data_size = TRANSFER_SIZE(8),
+ .seq_opc[0] = (SEQ_OPC_PADS_1 |
+ SEQ_OPC_CYCLES(8) |
+ SEQ_OPC_OPCODE(SPINOR_OP_RDID)),
+ .seq = {
+ STFSM_INST_CMD1,
+ STFSM_INST_DATA_READ,
+ STFSM_INST_STOP,
+ },
+ .seq_cfg = (SEQ_CFG_PADS_1 |
+ SEQ_CFG_READNOTWRITE |
+ SEQ_CFG_CSDEASSERT |
+ SEQ_CFG_STARTSEQ),
+};
+
+static struct stfsm_seq stfsm_seq_read_status_fifo = {
+ .data_size = TRANSFER_SIZE(4),
+ .seq_opc[0] = (SEQ_OPC_PADS_1 |
+ SEQ_OPC_CYCLES(8) |
+ SEQ_OPC_OPCODE(SPINOR_OP_RDSR)),
+ .seq = {
+ STFSM_INST_CMD1,
+ STFSM_INST_DATA_READ,
+ STFSM_INST_STOP,
+ },
+ .seq_cfg = (SEQ_CFG_PADS_1 |
+ SEQ_CFG_READNOTWRITE |
+ SEQ_CFG_CSDEASSERT |
+ SEQ_CFG_STARTSEQ),
+};
+
+static struct stfsm_seq stfsm_seq_erase_sector = {
+ /* 'addr_cfg' configured during initialisation */
+ .seq_opc = {
+ (SEQ_OPC_PADS_1 | SEQ_OPC_CYCLES(8) |
+ SEQ_OPC_OPCODE(SPINOR_OP_WREN) | SEQ_OPC_CSDEASSERT),
+
+ (SEQ_OPC_PADS_1 | SEQ_OPC_CYCLES(8) |
+ SEQ_OPC_OPCODE(SPINOR_OP_SE)),
+ },
+ .seq = {
+ STFSM_INST_CMD1,
+ STFSM_INST_CMD2,
+ STFSM_INST_ADD1,
+ STFSM_INST_ADD2,
+ STFSM_INST_STOP,
+ },
+ .seq_cfg = (SEQ_CFG_PADS_1 |
+ SEQ_CFG_READNOTWRITE |
+ SEQ_CFG_CSDEASSERT |
+ SEQ_CFG_STARTSEQ),
+};
+
+static struct stfsm_seq stfsm_seq_erase_chip = {
+ .seq_opc = {
+ (SEQ_OPC_PADS_1 | SEQ_OPC_CYCLES(8) |
+ SEQ_OPC_OPCODE(SPINOR_OP_WREN) | SEQ_OPC_CSDEASSERT),
+
+ (SEQ_OPC_PADS_1 | SEQ_OPC_CYCLES(8) |
+ SEQ_OPC_OPCODE(SPINOR_OP_CHIP_ERASE) | SEQ_OPC_CSDEASSERT),
+ },
+ .seq = {
+ STFSM_INST_CMD1,
+ STFSM_INST_CMD2,
+ STFSM_INST_WAIT,
+ STFSM_INST_STOP,
+ },
+ .seq_cfg = (SEQ_CFG_PADS_1 |
+ SEQ_CFG_ERASE |
+ SEQ_CFG_READNOTWRITE |
+ SEQ_CFG_CSDEASSERT |
+ SEQ_CFG_STARTSEQ),
+};
+
+static struct stfsm_seq stfsm_seq_write_status = {
+ .seq_opc[0] = (SEQ_OPC_PADS_1 | SEQ_OPC_CYCLES(8) |
+ SEQ_OPC_OPCODE(SPINOR_OP_WREN) | SEQ_OPC_CSDEASSERT),
+ .seq_opc[1] = (SEQ_OPC_PADS_1 | SEQ_OPC_CYCLES(8) |
+ SEQ_OPC_OPCODE(SPINOR_OP_WRSR)),
+ .seq = {
+ STFSM_INST_CMD1,
+ STFSM_INST_CMD2,
+ STFSM_INST_STA_WR1,
+ STFSM_INST_STOP,
+ },
+ .seq_cfg = (SEQ_CFG_PADS_1 |
+ SEQ_CFG_READNOTWRITE |
+ SEQ_CFG_CSDEASSERT |
+ SEQ_CFG_STARTSEQ),
+};
+
+/* Dummy sequence to read one byte of data from flash into the FIFO */
+static const struct stfsm_seq stfsm_seq_load_fifo_byte = {
+ .data_size = TRANSFER_SIZE(1),
+ .seq_opc[0] = (SEQ_OPC_PADS_1 |
+ SEQ_OPC_CYCLES(8) |
+ SEQ_OPC_OPCODE(SPINOR_OP_RDID)),
+ .seq = {
+ STFSM_INST_CMD1,
+ STFSM_INST_DATA_READ,
+ STFSM_INST_STOP,
+ },
+ .seq_cfg = (SEQ_CFG_PADS_1 |
+ SEQ_CFG_READNOTWRITE |
+ SEQ_CFG_CSDEASSERT |
+ SEQ_CFG_STARTSEQ),
+};
+
+static int stfsm_n25q_en_32bit_addr_seq(struct stfsm_seq *seq)
+{
+ seq->seq_opc[0] = (SEQ_OPC_PADS_1 | SEQ_OPC_CYCLES(8) |
+ SEQ_OPC_OPCODE(SPINOR_OP_EN4B));
+ seq->seq_opc[1] = (SEQ_OPC_PADS_1 | SEQ_OPC_CYCLES(8) |
+ SEQ_OPC_OPCODE(SPINOR_OP_WREN) |
+ SEQ_OPC_CSDEASSERT);
+
+ seq->seq[0] = STFSM_INST_CMD2;
+ seq->seq[1] = STFSM_INST_CMD1;
+ seq->seq[2] = STFSM_INST_WAIT;
+ seq->seq[3] = STFSM_INST_STOP;
+
+ seq->seq_cfg = (SEQ_CFG_PADS_1 |
+ SEQ_CFG_ERASE |
+ SEQ_CFG_READNOTWRITE |
+ SEQ_CFG_CSDEASSERT |
+ SEQ_CFG_STARTSEQ);
+
+ return 0;
+}
+
+static inline int stfsm_is_idle(struct stfsm *fsm)
+{
+ return readl(fsm->base + SPI_FAST_SEQ_STA) & 0x10;
+}
+
+static inline uint32_t stfsm_fifo_available(struct stfsm *fsm)
+{
+ return (readl(fsm->base + SPI_FAST_SEQ_STA) >> 5) & 0x7f;
+}
+
+static inline void stfsm_load_seq(struct stfsm *fsm,
+ const struct stfsm_seq *seq)
+{
+ void __iomem *dst = fsm->base + SPI_FAST_SEQ_TRANSFER_SIZE;
+ const uint32_t *src = (const uint32_t *)seq;
+ int words = sizeof(*seq) / sizeof(*src);
+
+ BUG_ON(!stfsm_is_idle(fsm));
+
+ while (words--) {
+ writel(*src, dst);
+ src++;
+ dst += 4;
+ }
+}
+
+static void stfsm_wait_seq(struct stfsm *fsm)
+{
+ unsigned long deadline;
+ int timeout = 0;
+
+ deadline = jiffies + msecs_to_jiffies(STFSM_MAX_WAIT_SEQ_MS);
+
+ while (!timeout) {
+ if (time_after_eq(jiffies, deadline))
+ timeout = 1;
+
+ if (stfsm_is_idle(fsm))
+ return;
+
+ cond_resched();
+ }
+
+ dev_err(fsm->dev, "timeout on sequence completion\n");
+}
+
+static void stfsm_read_fifo(struct stfsm *fsm, uint32_t *buf, uint32_t size)
+{
+ uint32_t remaining = size >> 2;
+ uint32_t avail;
+ uint32_t words;
+
+ dev_dbg(fsm->dev, "Reading %d bytes from FIFO\n", size);
+
+ BUG_ON((((uintptr_t)buf) & 0x3) || (size & 0x3));
+
+ while (remaining) {
+ for (;;) {
+ avail = stfsm_fifo_available(fsm);
+ if (avail)
+ break;
+ udelay(1);
+ }
+ words = min(avail, remaining);
+ remaining -= words;
+
+ readsl(fsm->base + SPI_FAST_SEQ_DATA_REG, buf, words);
+ buf += words;
+ }
+}
+
+/*
+ * Clear the data FIFO
+ *
+ * Typically, this is only required during driver initialisation, where no
+ * assumptions can be made regarding the state of the FIFO.
+ *
+ * The process of clearing the FIFO is complicated by fact that while it is
+ * possible for the FIFO to contain an arbitrary number of bytes [1], the
+ * SPI_FAST_SEQ_STA register only reports the number of complete 32-bit words
+ * present. Furthermore, data can only be drained from the FIFO by reading
+ * complete 32-bit words.
+ *
+ * With this in mind, a two stage process is used to the clear the FIFO:
+ *
+ * 1. Read any complete 32-bit words from the FIFO, as reported by the
+ * SPI_FAST_SEQ_STA register.
+ *
+ * 2. Mop up any remaining bytes. At this point, it is not known if there
+ * are 0, 1, 2, or 3 bytes in the FIFO. To handle all cases, a dummy FSM
+ * sequence is used to load one byte at a time, until a complete 32-bit
+ * word is formed; at most, 4 bytes will need to be loaded.
+ *
+ * [1] It is theoretically possible for the FIFO to contain an arbitrary number
+ * of bits. However, since there are no known use-cases that leave
+ * incomplete bytes in the FIFO, only words and bytes are considered here.
+ */
+static void stfsm_clear_fifo(struct stfsm *fsm)
+{
+ const struct stfsm_seq *seq = &stfsm_seq_load_fifo_byte;
+ uint32_t words, i;
+
+ /* 1. Clear any 32-bit words */
+ words = stfsm_fifo_available(fsm);
+ if (words) {
+ for (i = 0; i < words; i++)
+ readl(fsm->base + SPI_FAST_SEQ_DATA_REG);
+ dev_dbg(fsm->dev, "cleared %d words from FIFO\n", words);
+ }
+
+ /*
+ * 2. Clear any remaining bytes
+ * - Load the FIFO, one byte at a time, until a complete 32-bit word
+ * is available.
+ */
+ for (i = 0, words = 0; i < 4 && !words; i++) {
+ stfsm_load_seq(fsm, seq);
+ stfsm_wait_seq(fsm);
+ words = stfsm_fifo_available(fsm);
+ }
+
+ /* - A single word must be available now */
+ if (words != 1) {
+ dev_err(fsm->dev, "failed to clear bytes from the data FIFO\n");
+ return;
+ }
+
+ /* - Read the 32-bit word */
+ readl(fsm->base + SPI_FAST_SEQ_DATA_REG);
+
+ dev_dbg(fsm->dev, "cleared %d byte(s) from the data FIFO\n", 4 - i);
+}
+
+static int stfsm_write_fifo(struct stfsm *fsm, const uint32_t *buf,
+ uint32_t size)
+{
+ uint32_t words = size >> 2;
+
+ dev_dbg(fsm->dev, "writing %d bytes to FIFO\n", size);
+
+ BUG_ON((((uintptr_t)buf) & 0x3) || (size & 0x3));
+
+ writesl(fsm->base + SPI_FAST_SEQ_DATA_REG, buf, words);
+
+ return size;
+}
+
+static int stfsm_enter_32bit_addr(struct stfsm *fsm, int enter)
+{
+ struct stfsm_seq *seq = &fsm->stfsm_seq_en_32bit_addr;
+ uint32_t cmd = enter ? SPINOR_OP_EN4B : SPINOR_OP_EX4B;
+
+ seq->seq_opc[0] = (SEQ_OPC_PADS_1 |
+ SEQ_OPC_CYCLES(8) |
+ SEQ_OPC_OPCODE(cmd) |
+ SEQ_OPC_CSDEASSERT);
+
+ stfsm_load_seq(fsm, seq);
+
+ stfsm_wait_seq(fsm);
+
+ return 0;
+}
+
+static uint8_t stfsm_wait_busy(struct stfsm *fsm)
+{
+ struct stfsm_seq *seq = &stfsm_seq_read_status_fifo;
+ unsigned long deadline;
+ uint32_t status;
+ int timeout = 0;
+
+ /* Use RDRS1 */
+ seq->seq_opc[0] = (SEQ_OPC_PADS_1 |
+ SEQ_OPC_CYCLES(8) |
+ SEQ_OPC_OPCODE(SPINOR_OP_RDSR));
+
+ /* Load read_status sequence */
+ stfsm_load_seq(fsm, seq);
+
+ /*
+ * Repeat until busy bit is deasserted, or timeout, or error (S25FLxxxS)
+ */
+ deadline = jiffies + FLASH_MAX_BUSY_WAIT;
+ while (!timeout) {
+ if (time_after_eq(jiffies, deadline))
+ timeout = 1;
+
+ stfsm_wait_seq(fsm);
+
+ stfsm_read_fifo(fsm, &status, 4);
+
+ if ((status & FLASH_STATUS_BUSY) == 0)
+ return 0;
+
+ if ((fsm->configuration & CFG_S25FL_CHECK_ERROR_FLAGS) &&
+ ((status & S25FL_STATUS_P_ERR) ||
+ (status & S25FL_STATUS_E_ERR)))
+ return (uint8_t)(status & 0xff);
+
+ if (!timeout)
+ /* Restart */
+ writel(seq->seq_cfg, fsm->base + SPI_FAST_SEQ_CFG);
+
+ cond_resched();
+ }
+
+ dev_err(fsm->dev, "timeout on wait_busy\n");
+
+ return FLASH_STATUS_TIMEOUT;
+}
+
+static int stfsm_read_status(struct stfsm *fsm, uint8_t cmd,
+ uint8_t *data, int bytes)
+{
+ struct stfsm_seq *seq = &stfsm_seq_read_status_fifo;
+ uint32_t tmp;
+ uint8_t *t = (uint8_t *)&tmp;
+ int i;
+
+ dev_dbg(fsm->dev, "read 'status' register [0x%02x], %d byte(s)\n",
+ cmd, bytes);
+
+ BUG_ON(bytes != 1 && bytes != 2);
+
+ seq->seq_opc[0] = (SEQ_OPC_PADS_1 | SEQ_OPC_CYCLES(8) |
+ SEQ_OPC_OPCODE(cmd)),
+
+ stfsm_load_seq(fsm, seq);
+
+ stfsm_read_fifo(fsm, &tmp, 4);
+
+ for (i = 0; i < bytes; i++)
+ data[i] = t[i];
+
+ stfsm_wait_seq(fsm);
+
+ return 0;
+}
+
+static int stfsm_write_status(struct stfsm *fsm, uint8_t cmd,
+ uint16_t data, int bytes, int wait_busy)
+{
+ struct stfsm_seq *seq = &stfsm_seq_write_status;
+
+ dev_dbg(fsm->dev,
+ "write 'status' register [0x%02x], %d byte(s), 0x%04x\n"
+ " %s wait-busy\n", cmd, bytes, data, wait_busy ? "with" : "no");
+
+ BUG_ON(bytes != 1 && bytes != 2);
+
+ seq->seq_opc[1] = (SEQ_OPC_PADS_1 | SEQ_OPC_CYCLES(8) |
+ SEQ_OPC_OPCODE(cmd));
+
+ seq->status = (uint32_t)data | STA_PADS_1 | STA_CSDEASSERT;
+ seq->seq[2] = (bytes == 1) ? STFSM_INST_STA_WR1 : STFSM_INST_STA_WR1_2;
+
+ stfsm_load_seq(fsm, seq);
+
+ stfsm_wait_seq(fsm);
+
+ if (wait_busy)
+ stfsm_wait_busy(fsm);
+
+ return 0;
+}
+
+/*
+ * SoC reset on 'boot-from-spi' systems
+ *
+ * Certain modes of operation cause the Flash device to enter a particular state
+ * for a period of time (e.g. 'Erase Sector', 'Quad Enable', and 'Enter 32-bit
+ * Addr' commands). On boot-from-spi systems, it is important to consider what
+ * happens if a warm reset occurs during this period. The SPIBoot controller
+ * assumes that Flash device is in its default reset state, 24-bit address mode,
+ * and ready to accept commands. This can be achieved using some form of
+ * on-board logic/controller to force a device POR in response to a SoC-level
+ * reset or by making use of the device reset signal if available (limited
+ * number of devices only).
+ *
+ * Failure to take such precautions can cause problems following a warm reset.
+ * For some operations (e.g. ERASE), there is little that can be done. For
+ * other modes of operation (e.g. 32-bit addressing), options are often
+ * available that can help minimise the window in which a reset could cause a
+ * problem.
+ *
+ */
+static bool stfsm_can_handle_soc_reset(struct stfsm *fsm)
+{
+ /* Reset signal is available on the board and supported by the device */
+ if (fsm->reset_signal && fsm->info->flags & FLASH_FLAG_RESET)
+ return true;
+
+ /* Board-level logic forces a power-on-reset */
+ if (fsm->reset_por)
+ return true;
+
+ /* Reset is not properly handled and may result in failure to reboot */
+ return false;
+}
+
+/* Configure 'addr_cfg' according to addressing mode */
+static void stfsm_prepare_erasesec_seq(struct stfsm *fsm,
+ struct stfsm_seq *seq)
+{
+ int addr1_cycles = fsm->info->flags & FLASH_FLAG_32BIT_ADDR ? 16 : 8;
+
+ seq->addr_cfg = (ADR_CFG_CYCLES_ADD1(addr1_cycles) |
+ ADR_CFG_PADS_1_ADD1 |
+ ADR_CFG_CYCLES_ADD2(16) |
+ ADR_CFG_PADS_1_ADD2 |
+ ADR_CFG_CSDEASSERT_ADD2);
+}
+
+/* Search for preferred configuration based on available flags */
+static struct seq_rw_config *
+stfsm_search_seq_rw_configs(struct stfsm *fsm,
+ struct seq_rw_config cfgs[])
+{
+ struct seq_rw_config *config;
+ int flags = fsm->info->flags;
+
+ for (config = cfgs; config->cmd != 0; config++)
+ if ((config->flags & flags) == config->flags)
+ return config;
+
+ return NULL;
+}
+
+/* Prepare a READ/WRITE sequence according to configuration parameters */
+static void stfsm_prepare_rw_seq(struct stfsm *fsm,
+ struct stfsm_seq *seq,
+ struct seq_rw_config *cfg)
+{
+ int addr1_cycles, addr2_cycles;
+ int i = 0;
+
+ memset(seq, 0, sizeof(*seq));
+
+ /* Add READ/WRITE OPC */
+ seq->seq_opc[i++] = (SEQ_OPC_PADS_1 |
+ SEQ_OPC_CYCLES(8) |
+ SEQ_OPC_OPCODE(cfg->cmd));
+
+ /* Add WREN OPC for a WRITE sequence */
+ if (cfg->write)
+ seq->seq_opc[i++] = (SEQ_OPC_PADS_1 |
+ SEQ_OPC_CYCLES(8) |
+ SEQ_OPC_OPCODE(SPINOR_OP_WREN) |
+ SEQ_OPC_CSDEASSERT);
+
+ /* Address configuration (24 or 32-bit addresses) */
+ addr1_cycles = (fsm->info->flags & FLASH_FLAG_32BIT_ADDR) ? 16 : 8;
+ addr1_cycles /= cfg->addr_pads;
+ addr2_cycles = 16 / cfg->addr_pads;
+ seq->addr_cfg = ((addr1_cycles & 0x3f) << 0 | /* ADD1 cycles */
+ (cfg->addr_pads - 1) << 6 | /* ADD1 pads */
+ (addr2_cycles & 0x3f) << 16 | /* ADD2 cycles */
+ ((cfg->addr_pads - 1) << 22)); /* ADD2 pads */
+
+ /* Data/Sequence configuration */
+ seq->seq_cfg = ((cfg->data_pads - 1) << 16 |
+ SEQ_CFG_STARTSEQ |
+ SEQ_CFG_CSDEASSERT);
+ if (!cfg->write)
+ seq->seq_cfg |= SEQ_CFG_READNOTWRITE;
+
+ /* Mode configuration (no. of pads taken from addr cfg) */
+ seq->mode = ((cfg->mode_data & 0xff) << 0 | /* data */
+ (cfg->mode_cycles & 0x3f) << 16 | /* cycles */
+ (cfg->addr_pads - 1) << 22); /* pads */
+
+ /* Dummy configuration (no. of pads taken from addr cfg) */
+ seq->dummy = ((cfg->dummy_cycles & 0x3f) << 16 | /* cycles */
+ (cfg->addr_pads - 1) << 22); /* pads */
+
+
+ /* Instruction sequence */
+ i = 0;
+ if (cfg->write)
+ seq->seq[i++] = STFSM_INST_CMD2;
+
+ seq->seq[i++] = STFSM_INST_CMD1;
+
+ seq->seq[i++] = STFSM_INST_ADD1;
+ seq->seq[i++] = STFSM_INST_ADD2;
+
+ if (cfg->mode_cycles)
+ seq->seq[i++] = STFSM_INST_MODE;
+
+ if (cfg->dummy_cycles)
+ seq->seq[i++] = STFSM_INST_DUMMY;
+
+ seq->seq[i++] =
+ cfg->write ? STFSM_INST_DATA_WRITE : STFSM_INST_DATA_READ;
+ seq->seq[i++] = STFSM_INST_STOP;
+}
+
+static int stfsm_search_prepare_rw_seq(struct stfsm *fsm,
+ struct stfsm_seq *seq,
+ struct seq_rw_config *cfgs)
+{
+ struct seq_rw_config *config;
+
+ config = stfsm_search_seq_rw_configs(fsm, cfgs);
+ if (!config) {
+ dev_err(fsm->dev, "failed to find suitable config\n");
+ return -EINVAL;
+ }
+
+ stfsm_prepare_rw_seq(fsm, seq, config);
+
+ return 0;
+}
+
+/* Prepare a READ/WRITE/ERASE 'default' sequences */
+static int stfsm_prepare_rwe_seqs_default(struct stfsm *fsm)
+{
+ uint32_t flags = fsm->info->flags;
+ int ret;
+
+ /* Configure 'READ' sequence */
+ ret = stfsm_search_prepare_rw_seq(fsm, &fsm->stfsm_seq_read,
+ default_read_configs);
+ if (ret) {
+ dev_err(fsm->dev,
+ "failed to prep READ sequence with flags [0x%08x]\n",
+ flags);
+ return ret;
+ }
+
+ /* Configure 'WRITE' sequence */
+ ret = stfsm_search_prepare_rw_seq(fsm, &fsm->stfsm_seq_write,
+ default_write_configs);
+ if (ret) {
+ dev_err(fsm->dev,
+ "failed to prep WRITE sequence with flags [0x%08x]\n",
+ flags);
+ return ret;
+ }
+
+ /* Configure 'ERASE_SECTOR' sequence */
+ stfsm_prepare_erasesec_seq(fsm, &stfsm_seq_erase_sector);
+
+ return 0;
+}
+
+static int stfsm_mx25_config(struct stfsm *fsm)
+{
+ uint32_t flags = fsm->info->flags;
+ uint32_t data_pads;
+ uint8_t sta;
+ int ret;
+ bool soc_reset;
+
+ /*
+ * Use default READ/WRITE sequences
+ */
+ ret = stfsm_prepare_rwe_seqs_default(fsm);
+ if (ret)
+ return ret;
+
+ /*
+ * Configure 32-bit Address Support
+ */
+ if (flags & FLASH_FLAG_32BIT_ADDR) {
+ /* Configure 'enter_32bitaddr' FSM sequence */
+ stfsm_mx25_en_32bit_addr_seq(&fsm->stfsm_seq_en_32bit_addr);
+
+ soc_reset = stfsm_can_handle_soc_reset(fsm);
+ if (soc_reset || !fsm->booted_from_spi)
+ /* If we can handle SoC resets, we enable 32-bit address
+ * mode pervasively */
+ stfsm_enter_32bit_addr(fsm, 1);
+
+ else
+ /* Else, enable/disable 32-bit addressing before/after
+ * each operation */
+ fsm->configuration = (CFG_READ_TOGGLE_32BIT_ADDR |
+ CFG_WRITE_TOGGLE_32BIT_ADDR |
+ CFG_ERASESEC_TOGGLE_32BIT_ADDR);
+ }
+
+ /* Check status of 'QE' bit, update if required. */
+ stfsm_read_status(fsm, SPINOR_OP_RDSR, &sta, 1);
+ data_pads = ((fsm->stfsm_seq_read.seq_cfg >> 16) & 0x3) + 1;
+ if (data_pads == 4) {
+ if (!(sta & MX25_STATUS_QE)) {
+ /* Set 'QE' */
+ sta |= MX25_STATUS_QE;
+
+ stfsm_write_status(fsm, SPINOR_OP_WRSR, sta, 1, 1);
+ }
+ } else {
+ if (sta & MX25_STATUS_QE) {
+ /* Clear 'QE' */
+ sta &= ~MX25_STATUS_QE;
+
+ stfsm_write_status(fsm, SPINOR_OP_WRSR, sta, 1, 1);
+ }
+ }
+
+ return 0;
+}
+
+static int stfsm_n25q_config(struct stfsm *fsm)
+{
+ uint32_t flags = fsm->info->flags;
+ uint8_t vcr;
+ int ret = 0;
+ bool soc_reset;
+
+ /* Configure 'READ' sequence */
+ if (flags & FLASH_FLAG_32BIT_ADDR)
+ ret = stfsm_search_prepare_rw_seq(fsm, &fsm->stfsm_seq_read,
+ n25q_read4_configs);
+ else
+ ret = stfsm_search_prepare_rw_seq(fsm, &fsm->stfsm_seq_read,
+ n25q_read3_configs);
+ if (ret) {
+ dev_err(fsm->dev,
+ "failed to prepare READ sequence with flags [0x%08x]\n",
+ flags);
+ return ret;
+ }
+
+ /* Configure 'WRITE' sequence (default configs) */
+ ret = stfsm_search_prepare_rw_seq(fsm, &fsm->stfsm_seq_write,
+ default_write_configs);
+ if (ret) {
+ dev_err(fsm->dev,
+ "preparing WRITE sequence using flags [0x%08x] failed\n",
+ flags);
+ return ret;
+ }
+
+ /* * Configure 'ERASE_SECTOR' sequence */
+ stfsm_prepare_erasesec_seq(fsm, &stfsm_seq_erase_sector);
+
+ /* Configure 32-bit address support */
+ if (flags & FLASH_FLAG_32BIT_ADDR) {
+ stfsm_n25q_en_32bit_addr_seq(&fsm->stfsm_seq_en_32bit_addr);
+
+ soc_reset = stfsm_can_handle_soc_reset(fsm);
+ if (soc_reset || !fsm->booted_from_spi) {
+ /*
+ * If we can handle SoC resets, we enable 32-bit
+ * address mode pervasively
+ */
+ stfsm_enter_32bit_addr(fsm, 1);
+ } else {
+ /*
+ * If not, enable/disable for WRITE and ERASE
+ * operations (READ uses special commands)
+ */
+ fsm->configuration = (CFG_WRITE_TOGGLE_32BIT_ADDR |
+ CFG_ERASESEC_TOGGLE_32BIT_ADDR);
+ }
+ }
+
+ /*
+ * Configure device to use 8 dummy cycles
+ */
+ vcr = (N25Q_VCR_DUMMY_CYCLES(8) | N25Q_VCR_XIP_DISABLED |
+ N25Q_VCR_WRAP_CONT);
+ stfsm_write_status(fsm, N25Q_CMD_WRVCR, vcr, 1, 0);
+
+ return 0;
+}
+
+static void stfsm_s25fl_prepare_erasesec_seq_32(struct stfsm_seq *seq)
+{
+ seq->seq_opc[1] = (SEQ_OPC_PADS_1 |
+ SEQ_OPC_CYCLES(8) |
+ SEQ_OPC_OPCODE(S25FL_CMD_SE4));
+
+ seq->addr_cfg = (ADR_CFG_CYCLES_ADD1(16) |
+ ADR_CFG_PADS_1_ADD1 |
+ ADR_CFG_CYCLES_ADD2(16) |
+ ADR_CFG_PADS_1_ADD2 |
+ ADR_CFG_CSDEASSERT_ADD2);
+}
+
+static void stfsm_s25fl_read_dyb(struct stfsm *fsm, uint32_t offs, uint8_t *dby)
+{
+ uint32_t tmp;
+ struct stfsm_seq seq = {
+ .data_size = TRANSFER_SIZE(4),
+ .seq_opc[0] = (SEQ_OPC_PADS_1 |
+ SEQ_OPC_CYCLES(8) |
+ SEQ_OPC_OPCODE(S25FL_CMD_DYBRD)),
+ .addr_cfg = (ADR_CFG_CYCLES_ADD1(16) |
+ ADR_CFG_PADS_1_ADD1 |
+ ADR_CFG_CYCLES_ADD2(16) |
+ ADR_CFG_PADS_1_ADD2),
+ .addr1 = (offs >> 16) & 0xffff,
+ .addr2 = offs & 0xffff,
+ .seq = {
+ STFSM_INST_CMD1,
+ STFSM_INST_ADD1,
+ STFSM_INST_ADD2,
+ STFSM_INST_DATA_READ,
+ STFSM_INST_STOP,
+ },
+ .seq_cfg = (SEQ_CFG_PADS_1 |
+ SEQ_CFG_READNOTWRITE |
+ SEQ_CFG_CSDEASSERT |
+ SEQ_CFG_STARTSEQ),
+ };
+
+ stfsm_load_seq(fsm, &seq);
+
+ stfsm_read_fifo(fsm, &tmp, 4);
+
+ *dby = (uint8_t)(tmp >> 24);
+
+ stfsm_wait_seq(fsm);
+}
+
+static void stfsm_s25fl_write_dyb(struct stfsm *fsm, uint32_t offs, uint8_t dby)
+{
+ struct stfsm_seq seq = {
+ .seq_opc[0] = (SEQ_OPC_PADS_1 | SEQ_OPC_CYCLES(8) |
+ SEQ_OPC_OPCODE(SPINOR_OP_WREN) |
+ SEQ_OPC_CSDEASSERT),
+ .seq_opc[1] = (SEQ_OPC_PADS_1 | SEQ_OPC_CYCLES(8) |
+ SEQ_OPC_OPCODE(S25FL_CMD_DYBWR)),
+ .addr_cfg = (ADR_CFG_CYCLES_ADD1(16) |
+ ADR_CFG_PADS_1_ADD1 |
+ ADR_CFG_CYCLES_ADD2(16) |
+ ADR_CFG_PADS_1_ADD2),
+ .status = (uint32_t)dby | STA_PADS_1 | STA_CSDEASSERT,
+ .addr1 = (offs >> 16) & 0xffff,
+ .addr2 = offs & 0xffff,
+ .seq = {
+ STFSM_INST_CMD1,
+ STFSM_INST_CMD2,
+ STFSM_INST_ADD1,
+ STFSM_INST_ADD2,
+ STFSM_INST_STA_WR1,
+ STFSM_INST_STOP,
+ },
+ .seq_cfg = (SEQ_CFG_PADS_1 |
+ SEQ_CFG_READNOTWRITE |
+ SEQ_CFG_CSDEASSERT |
+ SEQ_CFG_STARTSEQ),
+ };
+
+ stfsm_load_seq(fsm, &seq);
+ stfsm_wait_seq(fsm);
+
+ stfsm_wait_busy(fsm);
+}
+
+static int stfsm_s25fl_clear_status_reg(struct stfsm *fsm)
+{
+ struct stfsm_seq seq = {
+ .seq_opc[0] = (SEQ_OPC_PADS_1 |
+ SEQ_OPC_CYCLES(8) |
+ SEQ_OPC_OPCODE(S25FL_CMD_CLSR) |
+ SEQ_OPC_CSDEASSERT),
+ .seq_opc[1] = (SEQ_OPC_PADS_1 |
+ SEQ_OPC_CYCLES(8) |
+ SEQ_OPC_OPCODE(SPINOR_OP_WRDI) |
+ SEQ_OPC_CSDEASSERT),
+ .seq = {
+ STFSM_INST_CMD1,
+ STFSM_INST_CMD2,
+ STFSM_INST_WAIT,
+ STFSM_INST_STOP,
+ },
+ .seq_cfg = (SEQ_CFG_PADS_1 |
+ SEQ_CFG_ERASE |
+ SEQ_CFG_READNOTWRITE |
+ SEQ_CFG_CSDEASSERT |
+ SEQ_CFG_STARTSEQ),
+ };
+
+ stfsm_load_seq(fsm, &seq);
+
+ stfsm_wait_seq(fsm);
+
+ return 0;
+}
+
+static int stfsm_s25fl_config(struct stfsm *fsm)
+{
+ struct flash_info *info = fsm->info;
+ uint32_t flags = info->flags;
+ uint32_t data_pads;
+ uint32_t offs;
+ uint16_t sta_wr;
+ uint8_t sr1, cr1, dyb;
+ int update_sr = 0;
+ int ret;
+
+ if (flags & FLASH_FLAG_32BIT_ADDR) {
+ /*
+ * Prepare Read/Write/Erase sequences according to S25FLxxx
+ * 32-bit address command set
+ */
+ ret = stfsm_search_prepare_rw_seq(fsm, &fsm->stfsm_seq_read,
+ stfsm_s25fl_read4_configs);
+ if (ret)
+ return ret;
+
+ ret = stfsm_search_prepare_rw_seq(fsm, &fsm->stfsm_seq_write,
+ stfsm_s25fl_write4_configs);
+ if (ret)
+ return ret;
+
+ stfsm_s25fl_prepare_erasesec_seq_32(&stfsm_seq_erase_sector);
+
+ } else {
+ /* Use default configurations for 24-bit addressing */
+ ret = stfsm_prepare_rwe_seqs_default(fsm);
+ if (ret)
+ return ret;
+ }
+
+ /*
+ * For devices that support 'DYB' sector locking, check lock status and
+ * unlock sectors if necessary (some variants power-on with sectors
+ * locked by default)
+ */
+ if (flags & FLASH_FLAG_DYB_LOCKING) {
+ offs = 0;
+ for (offs = 0; offs < info->sector_size * info->n_sectors;) {
+ stfsm_s25fl_read_dyb(fsm, offs, &dyb);
+ if (dyb == 0x00)
+ stfsm_s25fl_write_dyb(fsm, offs, 0xff);
+
+ /* Handle bottom/top 4KiB parameter sectors */
+ if ((offs < info->sector_size * 2) ||
+ (offs >= (info->sector_size - info->n_sectors * 4)))
+ offs += 0x1000;
+ else
+ offs += 0x10000;
+ }
+ }
+
+ /* Check status of 'QE' bit, update if required. */
+ stfsm_read_status(fsm, SPINOR_OP_RDSR2, &cr1, 1);
+ data_pads = ((fsm->stfsm_seq_read.seq_cfg >> 16) & 0x3) + 1;
+ if (data_pads == 4) {
+ if (!(cr1 & STFSM_S25FL_CONFIG_QE)) {
+ /* Set 'QE' */
+ cr1 |= STFSM_S25FL_CONFIG_QE;
+
+ update_sr = 1;
+ }
+ } else {
+ if (cr1 & STFSM_S25FL_CONFIG_QE) {
+ /* Clear 'QE' */
+ cr1 &= ~STFSM_S25FL_CONFIG_QE;
+
+ update_sr = 1;
+ }
+ }
+ if (update_sr) {
+ stfsm_read_status(fsm, SPINOR_OP_RDSR, &sr1, 1);
+ sta_wr = ((uint16_t)cr1 << 8) | sr1;
+ stfsm_write_status(fsm, SPINOR_OP_WRSR, sta_wr, 2, 1);
+ }
+
+ /*
+ * S25FLxxx devices support Program and Error error flags.
+ * Configure driver to check flags and clear if necessary.
+ */
+ fsm->configuration |= CFG_S25FL_CHECK_ERROR_FLAGS;
+
+ return 0;
+}
+
+static int stfsm_w25q_config(struct stfsm *fsm)
+{
+ uint32_t data_pads;
+ uint8_t sr1, sr2;
+ uint16_t sr_wr;
+ int update_sr = 0;
+ int ret;
+
+ ret = stfsm_prepare_rwe_seqs_default(fsm);
+ if (ret)
+ return ret;
+
+ /* Check status of 'QE' bit, update if required. */
+ stfsm_read_status(fsm, SPINOR_OP_RDSR2, &sr2, 1);
+ data_pads = ((fsm->stfsm_seq_read.seq_cfg >> 16) & 0x3) + 1;
+ if (data_pads == 4) {
+ if (!(sr2 & W25Q_STATUS_QE)) {
+ /* Set 'QE' */
+ sr2 |= W25Q_STATUS_QE;
+ update_sr = 1;
+ }
+ } else {
+ if (sr2 & W25Q_STATUS_QE) {
+ /* Clear 'QE' */
+ sr2 &= ~W25Q_STATUS_QE;
+ update_sr = 1;
+ }
+ }
+ if (update_sr) {
+ /* Write status register */
+ stfsm_read_status(fsm, SPINOR_OP_RDSR, &sr1, 1);
+ sr_wr = ((uint16_t)sr2 << 8) | sr1;
+ stfsm_write_status(fsm, SPINOR_OP_WRSR, sr_wr, 2, 1);
+ }
+
+ return 0;
+}
+
+static int stfsm_read(struct stfsm *fsm, uint8_t *buf, uint32_t size,
+ uint32_t offset)
+{
+ struct stfsm_seq *seq = &fsm->stfsm_seq_read;
+ uint32_t data_pads;
+ uint32_t read_mask;
+ uint32_t size_ub;
+ uint32_t size_lb;
+ uint32_t size_mop;
+ uint32_t tmp[4];
+ uint32_t page_buf[FLASH_PAGESIZE_32];
+ uint8_t *p;
+
+ dev_dbg(fsm->dev, "reading %d bytes from 0x%08x\n", size, offset);
+
+ /* Enter 32-bit address mode, if required */
+ if (fsm->configuration & CFG_READ_TOGGLE_32BIT_ADDR)
+ stfsm_enter_32bit_addr(fsm, 1);
+
+ /* Must read in multiples of 32 cycles (or 32*pads/8 Bytes) */
+ data_pads = ((seq->seq_cfg >> 16) & 0x3) + 1;
+ read_mask = (data_pads << 2) - 1;
+
+ /* Handle non-aligned buf */
+ p = ((uintptr_t)buf & 0x3) ? (uint8_t *)page_buf : buf;
+
+ /* Handle non-aligned size */
+ size_ub = (size + read_mask) & ~read_mask;
+ size_lb = size & ~read_mask;
+ size_mop = size & read_mask;
+
+ seq->data_size = TRANSFER_SIZE(size_ub);
+ seq->addr1 = (offset >> 16) & 0xffff;
+ seq->addr2 = offset & 0xffff;
+
+ stfsm_load_seq(fsm, seq);
+
+ if (size_lb)
+ stfsm_read_fifo(fsm, (uint32_t *)p, size_lb);
+
+ if (size_mop) {
+ stfsm_read_fifo(fsm, tmp, read_mask + 1);
+ memcpy(p + size_lb, &tmp, size_mop);
+ }
+
+ /* Handle non-aligned buf */
+ if ((uintptr_t)buf & 0x3)
+ memcpy(buf, page_buf, size);
+
+ /* Wait for sequence to finish */
+ stfsm_wait_seq(fsm);
+
+ stfsm_clear_fifo(fsm);
+
+ /* Exit 32-bit address mode, if required */
+ if (fsm->configuration & CFG_READ_TOGGLE_32BIT_ADDR)
+ stfsm_enter_32bit_addr(fsm, 0);
+
+ return 0;
+}
+
+static int stfsm_write(struct stfsm *fsm, const uint8_t *buf,
+ uint32_t size, uint32_t offset)
+{
+ struct stfsm_seq *seq = &fsm->stfsm_seq_write;
+ uint32_t data_pads;
+ uint32_t write_mask;
+ uint32_t size_ub;
+ uint32_t size_lb;
+ uint32_t size_mop;
+ uint32_t tmp[4];
+ uint32_t i;
+ uint32_t page_buf[FLASH_PAGESIZE_32];
+ uint8_t *t = (uint8_t *)&tmp;
+ const uint8_t *p;
+ int ret;
+
+ dev_dbg(fsm->dev, "writing %d bytes to 0x%08x\n", size, offset);
+
+ /* Enter 32-bit address mode, if required */
+ if (fsm->configuration & CFG_WRITE_TOGGLE_32BIT_ADDR)
+ stfsm_enter_32bit_addr(fsm, 1);
+
+ /* Must write in multiples of 32 cycles (or 32*pads/8 bytes) */
+ data_pads = ((seq->seq_cfg >> 16) & 0x3) + 1;
+ write_mask = (data_pads << 2) - 1;
+
+ /* Handle non-aligned buf */
+ if ((uintptr_t)buf & 0x3) {
+ memcpy(page_buf, buf, size);
+ p = (uint8_t *)page_buf;
+ } else {
+ p = buf;
+ }
+
+ /* Handle non-aligned size */
+ size_ub = (size + write_mask) & ~write_mask;
+ size_lb = size & ~write_mask;
+ size_mop = size & write_mask;
+
+ seq->data_size = TRANSFER_SIZE(size_ub);
+ seq->addr1 = (offset >> 16) & 0xffff;
+ seq->addr2 = offset & 0xffff;
+
+ /* Need to set FIFO to write mode, before writing data to FIFO (see
+ * GNBvb79594)
+ */
+ writel(0x00040000, fsm->base + SPI_FAST_SEQ_CFG);
+
+ /*
+ * Before writing data to the FIFO, apply a small delay to allow a
+ * potential change of FIFO direction to complete.
+ */
+ if (fsm->fifo_dir_delay == 0)
+ readl(fsm->base + SPI_FAST_SEQ_CFG);
+ else
+ udelay(fsm->fifo_dir_delay);
+
+
+ /* Write data to FIFO, before starting sequence (see GNBvd79593) */
+ if (size_lb) {
+ stfsm_write_fifo(fsm, (uint32_t *)p, size_lb);
+ p += size_lb;
+ }
+
+ /* Handle non-aligned size */
+ if (size_mop) {
+ memset(t, 0xff, write_mask + 1); /* fill with 0xff's */
+ for (i = 0; i < size_mop; i++)
+ t[i] = *p++;
+
+ stfsm_write_fifo(fsm, tmp, write_mask + 1);
+ }
+
+ /* Start sequence */
+ stfsm_load_seq(fsm, seq);
+
+ /* Wait for sequence to finish */
+ stfsm_wait_seq(fsm);
+
+ /* Wait for completion */
+ ret = stfsm_wait_busy(fsm);
+ if (ret && fsm->configuration & CFG_S25FL_CHECK_ERROR_FLAGS)
+ stfsm_s25fl_clear_status_reg(fsm);
+
+ /* Exit 32-bit address mode, if required */
+ if (fsm->configuration & CFG_WRITE_TOGGLE_32BIT_ADDR)
+ stfsm_enter_32bit_addr(fsm, 0);
+
+ return 0;
+}
+
+/*
+ * Read an address range from the flash chip. The address range
+ * may be any size provided it is within the physical boundaries.
+ */
+static int stfsm_mtd_read(struct mtd_info *mtd, loff_t from, size_t len,
+ size_t *retlen, u_char *buf)
+{
+ struct stfsm *fsm = dev_get_drvdata(mtd->dev.parent);
+ uint32_t bytes;
+
+ dev_dbg(fsm->dev, "%s from 0x%08x, len %zd\n",
+ __func__, (u32)from, len);
+
+ mutex_lock(&fsm->lock);
+
+ while (len > 0) {
+ bytes = min_t(size_t, len, FLASH_PAGESIZE);
+
+ stfsm_read(fsm, buf, bytes, from);
+
+ buf += bytes;
+ from += bytes;
+ len -= bytes;
+
+ *retlen += bytes;
+ }
+
+ mutex_unlock(&fsm->lock);
+
+ return 0;
+}
+
+static int stfsm_erase_sector(struct stfsm *fsm, uint32_t offset)
+{
+ struct stfsm_seq *seq = &stfsm_seq_erase_sector;
+ int ret;
+
+ dev_dbg(fsm->dev, "erasing sector at 0x%08x\n", offset);
+
+ /* Enter 32-bit address mode, if required */
+ if (fsm->configuration & CFG_ERASESEC_TOGGLE_32BIT_ADDR)
+ stfsm_enter_32bit_addr(fsm, 1);
+
+ seq->addr1 = (offset >> 16) & 0xffff;
+ seq->addr2 = offset & 0xffff;
+
+ stfsm_load_seq(fsm, seq);
+
+ stfsm_wait_seq(fsm);
+
+ /* Wait for completion */
+ ret = stfsm_wait_busy(fsm);
+ if (ret && fsm->configuration & CFG_S25FL_CHECK_ERROR_FLAGS)
+ stfsm_s25fl_clear_status_reg(fsm);
+
+ /* Exit 32-bit address mode, if required */
+ if (fsm->configuration & CFG_ERASESEC_TOGGLE_32BIT_ADDR)
+ stfsm_enter_32bit_addr(fsm, 0);
+
+ return ret;
+}
+
+static int stfsm_erase_chip(struct stfsm *fsm)
+{
+ const struct stfsm_seq *seq = &stfsm_seq_erase_chip;
+
+ dev_dbg(fsm->dev, "erasing chip\n");
+
+ stfsm_load_seq(fsm, seq);
+
+ stfsm_wait_seq(fsm);
+
+ return stfsm_wait_busy(fsm);
+}
+
+/*
+ * Write an address range to the flash chip. Data must be written in
+ * FLASH_PAGESIZE chunks. The address range may be any size provided
+ * it is within the physical boundaries.
+ */
+static int stfsm_mtd_write(struct mtd_info *mtd, loff_t to, size_t len,
+ size_t *retlen, const u_char *buf)
+{
+ struct stfsm *fsm = dev_get_drvdata(mtd->dev.parent);
+
+ u32 page_offs;
+ u32 bytes;
+ uint8_t *b = (uint8_t *)buf;
+ int ret = 0;
+
+ dev_dbg(fsm->dev, "%s to 0x%08x, len %zd\n", __func__, (u32)to, len);
+
+ /* Offset within page */
+ page_offs = to % FLASH_PAGESIZE;
+
+ mutex_lock(&fsm->lock);
+
+ while (len) {
+ /* Write up to page boundary */
+ bytes = min_t(size_t, FLASH_PAGESIZE - page_offs, len);
+
+ ret = stfsm_write(fsm, b, bytes, to);
+ if (ret)
+ goto out1;
+
+ b += bytes;
+ len -= bytes;
+ to += bytes;
+
+ /* We are now page-aligned */
+ page_offs = 0;
+
+ *retlen += bytes;
+
+ }
+
+out1:
+ mutex_unlock(&fsm->lock);
+
+ return ret;
+}
+
+/*
+ * Erase an address range on the flash chip. The address range may extend
+ * one or more erase sectors. Return an error is there is a problem erasing.
+ */
+static int stfsm_mtd_erase(struct mtd_info *mtd, struct erase_info *instr)
+{
+ struct stfsm *fsm = dev_get_drvdata(mtd->dev.parent);
+ u32 addr, len;
+ int ret;
+
+ dev_dbg(fsm->dev, "%s at 0x%llx, len %lld\n", __func__,
+ (long long)instr->addr, (long long)instr->len);
+
+ addr = instr->addr;
+ len = instr->len;
+
+ mutex_lock(&fsm->lock);
+
+ /* Whole-chip erase? */
+ if (len == mtd->size) {
+ ret = stfsm_erase_chip(fsm);
+ if (ret)
+ goto out1;
+ } else {
+ while (len) {
+ ret = stfsm_erase_sector(fsm, addr);
+ if (ret)
+ goto out1;
+
+ addr += mtd->erasesize;
+ len -= mtd->erasesize;
+ }
+ }
+
+ mutex_unlock(&fsm->lock);
+
+ instr->state = MTD_ERASE_DONE;
+ mtd_erase_callback(instr);
+
+ return 0;
+
+out1:
+ instr->state = MTD_ERASE_FAILED;
+ mutex_unlock(&fsm->lock);
+
+ return ret;
+}
+
+static void stfsm_read_jedec(struct stfsm *fsm, uint8_t *jedec)
+{
+ const struct stfsm_seq *seq = &stfsm_seq_read_jedec;
+ uint32_t tmp[2];
+
+ stfsm_load_seq(fsm, seq);
+
+ stfsm_read_fifo(fsm, tmp, 8);
+
+ memcpy(jedec, tmp, 5);
+
+ stfsm_wait_seq(fsm);
+}
+
+static struct flash_info *stfsm_jedec_probe(struct stfsm *fsm)
+{
+ struct flash_info *info;
+ u16 ext_jedec;
+ u32 jedec;
+ u8 id[5];
+
+ stfsm_read_jedec(fsm, id);
+
+ jedec = id[0] << 16 | id[1] << 8 | id[2];
+ /*
+ * JEDEC also defines an optional "extended device information"
+ * string for after vendor-specific data, after the three bytes
+ * we use here. Supporting some chips might require using it.
+ */
+ ext_jedec = id[3] << 8 | id[4];
+
+ dev_dbg(fsm->dev, "JEDEC = 0x%08x [%02x %02x %02x %02x %02x]\n",
+ jedec, id[0], id[1], id[2], id[3], id[4]);
+
+ for (info = flash_types; info->name; info++) {
+ if (info->jedec_id == jedec) {
+ if (info->ext_id && info->ext_id != ext_jedec)
+ continue;
+ return info;
+ }
+ }
+ dev_err(fsm->dev, "Unrecognized JEDEC id %06x\n", jedec);
+
+ return NULL;
+}
+
+static int stfsm_set_mode(struct stfsm *fsm, uint32_t mode)
+{
+ int ret, timeout = 10;
+
+ /* Wait for controller to accept mode change */
+ while (--timeout) {
+ ret = readl(fsm->base + SPI_STA_MODE_CHANGE);
+ if (ret & 0x1)
+ break;
+ udelay(1);
+ }
+
+ if (!timeout)
+ return -EBUSY;
+
+ writel(mode, fsm->base + SPI_MODESELECT);
+
+ return 0;
+}
+
+static void stfsm_set_freq(struct stfsm *fsm, uint32_t spi_freq)
+{
+ uint32_t emi_freq;
+ uint32_t clk_div;
+
+ emi_freq = clk_get_rate(fsm->clk);
+
+ /*
+ * Calculate clk_div - values between 2 and 128
+ * Multiple of 2, rounded up
+ */
+ clk_div = 2 * DIV_ROUND_UP(emi_freq, 2 * spi_freq);
+ if (clk_div < 2)
+ clk_div = 2;
+ else if (clk_div > 128)
+ clk_div = 128;
+
+ /*
+ * Determine a suitable delay for the IP to complete a change of
+ * direction of the FIFO. The required delay is related to the clock
+ * divider used. The following heuristics are based on empirical tests,
+ * using a 100MHz EMI clock.
+ */
+ if (clk_div <= 4)
+ fsm->fifo_dir_delay = 0;
+ else if (clk_div <= 10)
+ fsm->fifo_dir_delay = 1;
+ else
+ fsm->fifo_dir_delay = DIV_ROUND_UP(clk_div, 10);
+
+ dev_dbg(fsm->dev, "emi_clk = %uHZ, spi_freq = %uHZ, clk_div = %u\n",
+ emi_freq, spi_freq, clk_div);
+
+ writel(clk_div, fsm->base + SPI_CLOCKDIV);
+}
+
+static int stfsm_init(struct stfsm *fsm)
+{
+ int ret;
+
+ /* Perform a soft reset of the FSM controller */
+ writel(SEQ_CFG_SWRESET, fsm->base + SPI_FAST_SEQ_CFG);
+ udelay(1);
+ writel(0, fsm->base + SPI_FAST_SEQ_CFG);
+
+ /* Set clock to 'safe' frequency initially */
+ stfsm_set_freq(fsm, STFSM_FLASH_SAFE_FREQ);
+
+ /* Switch to FSM */
+ ret = stfsm_set_mode(fsm, SPI_MODESELECT_FSM);
+ if (ret)
+ return ret;
+
+ /* Set timing parameters */
+ writel(SPI_CFG_DEVICE_ST |
+ SPI_CFG_DEFAULT_MIN_CS_HIGH |
+ SPI_CFG_DEFAULT_CS_SETUPHOLD |
+ SPI_CFG_DEFAULT_DATA_HOLD,
+ fsm->base + SPI_CONFIGDATA);
+ writel(STFSM_DEFAULT_WR_TIME, fsm->base + SPI_STATUS_WR_TIME_REG);
+
+ /*
+ * Set the FSM 'WAIT' delay to the minimum workable value. Note, for
+ * our purposes, the WAIT instruction is used purely to achieve
+ * "sequence validity" rather than actually implement a delay.
+ */
+ writel(0x00000001, fsm->base + SPI_PROGRAM_ERASE_TIME);
+
+ /* Clear FIFO, just in case */
+ stfsm_clear_fifo(fsm);
+
+ return 0;
+}
+
+static void stfsm_fetch_platform_configs(struct platform_device *pdev)
+{
+ struct stfsm *fsm = platform_get_drvdata(pdev);
+ struct device_node *np = pdev->dev.of_node;
+ struct regmap *regmap;
+ uint32_t boot_device_reg;
+ uint32_t boot_device_spi;
+ uint32_t boot_device; /* Value we read from *boot_device_reg */
+ int ret;
+
+ /* Booting from SPI NOR Flash is the default */
+ fsm->booted_from_spi = true;
+
+ regmap = syscon_regmap_lookup_by_phandle(np, "st,syscfg");
+ if (IS_ERR(regmap))
+ goto boot_device_fail;
+
+ fsm->reset_signal = of_property_read_bool(np, "st,reset-signal");
+
+ fsm->reset_por = of_property_read_bool(np, "st,reset-por");
+
+ /* Where in the syscon the boot device information lives */
+ ret = of_property_read_u32(np, "st,boot-device-reg", &boot_device_reg);
+ if (ret)
+ goto boot_device_fail;
+
+ /* Boot device value when booted from SPI NOR */
+ ret = of_property_read_u32(np, "st,boot-device-spi", &boot_device_spi);
+ if (ret)
+ goto boot_device_fail;
+
+ ret = regmap_read(regmap, boot_device_reg, &boot_device);
+ if (ret)
+ goto boot_device_fail;
+
+ if (boot_device != boot_device_spi)
+ fsm->booted_from_spi = false;
+
+ return;
+
+boot_device_fail:
+ dev_warn(&pdev->dev,
+ "failed to fetch boot device, assuming boot from SPI\n");
+}
+
+static int stfsm_probe(struct platform_device *pdev)
+{
+ struct device_node *np = pdev->dev.of_node;
+ struct mtd_part_parser_data ppdata;
+ struct flash_info *info;
+ struct resource *res;
+ struct stfsm *fsm;
+ int ret;
+
+ if (!np) {
+ dev_err(&pdev->dev, "No DT found\n");
+ return -EINVAL;
+ }
+ ppdata.of_node = np;
+
+ fsm = devm_kzalloc(&pdev->dev, sizeof(*fsm), GFP_KERNEL);
+ if (!fsm)
+ return -ENOMEM;
+
+ fsm->dev = &pdev->dev;
+
+ platform_set_drvdata(pdev, fsm);
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res) {
+ dev_err(&pdev->dev, "Resource not found\n");
+ return -ENODEV;
+ }
+
+ fsm->base = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(fsm->base)) {
+ dev_err(&pdev->dev,
+ "Failed to reserve memory region %pR\n", res);
+ return PTR_ERR(fsm->base);
+ }
+
+ fsm->clk = devm_clk_get(&pdev->dev, NULL);
+ if (IS_ERR(fsm->clk)) {
+ dev_err(fsm->dev, "Couldn't find EMI clock.\n");
+ return PTR_ERR(fsm->clk);
+ }
+
+ ret = clk_prepare_enable(fsm->clk);
+ if (ret) {
+ dev_err(fsm->dev, "Failed to enable EMI clock.\n");
+ return ret;
+ }
+
+ mutex_init(&fsm->lock);
+
+ ret = stfsm_init(fsm);
+ if (ret) {
+ dev_err(&pdev->dev, "Failed to initialise FSM Controller\n");
+ return ret;
+ }
+
+ stfsm_fetch_platform_configs(pdev);
+
+ /* Detect SPI FLASH device */
+ info = stfsm_jedec_probe(fsm);
+ if (!info)
+ return -ENODEV;
+ fsm->info = info;
+
+ /* Use device size to determine address width */
+ if (info->sector_size * info->n_sectors > 0x1000000)
+ info->flags |= FLASH_FLAG_32BIT_ADDR;
+
+ /*
+ * Configure READ/WRITE/ERASE sequences according to platform and
+ * device flags.
+ */
+ if (info->config) {
+ ret = info->config(fsm);
+ if (ret)
+ return ret;
+ } else {
+ ret = stfsm_prepare_rwe_seqs_default(fsm);
+ if (ret)
+ return ret;
+ }
+
+ fsm->mtd.name = info->name;
+ fsm->mtd.dev.parent = &pdev->dev;
+ fsm->mtd.type = MTD_NORFLASH;
+ fsm->mtd.writesize = 4;
+ fsm->mtd.writebufsize = fsm->mtd.writesize;
+ fsm->mtd.flags = MTD_CAP_NORFLASH;
+ fsm->mtd.size = info->sector_size * info->n_sectors;
+ fsm->mtd.erasesize = info->sector_size;
+
+ fsm->mtd._read = stfsm_mtd_read;
+ fsm->mtd._write = stfsm_mtd_write;
+ fsm->mtd._erase = stfsm_mtd_erase;
+
+ dev_info(&pdev->dev,
+ "Found serial flash device: %s\n"
+ " size = %llx (%lldMiB) erasesize = 0x%08x (%uKiB)\n",
+ info->name,
+ (long long)fsm->mtd.size, (long long)(fsm->mtd.size >> 20),
+ fsm->mtd.erasesize, (fsm->mtd.erasesize >> 10));
+
+ return mtd_device_parse_register(&fsm->mtd, NULL, &ppdata, NULL, 0);
+}
+
+static int stfsm_remove(struct platform_device *pdev)
+{
+ struct stfsm *fsm = platform_get_drvdata(pdev);
+
+ return mtd_device_unregister(&fsm->mtd);
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int stfsmfsm_suspend(struct device *dev)
+{
+ struct stfsm *fsm = dev_get_drvdata(dev);
+
+ clk_disable_unprepare(fsm->clk);
+
+ return 0;
+}
+
+static int stfsmfsm_resume(struct device *dev)
+{
+ struct stfsm *fsm = dev_get_drvdata(dev);
+
+ clk_prepare_enable(fsm->clk);
+
+ return 0;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(stfsm_pm_ops, stfsmfsm_suspend, stfsmfsm_resume);
+
+static const struct of_device_id stfsm_match[] = {
+ { .compatible = "st,spi-fsm", },
+ {},
+};
+MODULE_DEVICE_TABLE(of, stfsm_match);
+
+static struct platform_driver stfsm_driver = {
+ .probe = stfsm_probe,
+ .remove = stfsm_remove,
+ .driver = {
+ .name = "st-spi-fsm",
+ .of_match_table = stfsm_match,
+ .pm = &stfsm_pm_ops,
+ },
+};
+module_platform_driver(stfsm_driver);
+
+MODULE_AUTHOR("Angus Clark <angus.clark@st.com>");
+MODULE_DESCRIPTION("ST SPI FSM driver");
+MODULE_LICENSE("GPL");