diff options
Diffstat (limited to 'kernel/drivers/mmc/host/sdhci.h')
| -rw-r--r-- | kernel/drivers/mmc/host/sdhci.h | 663 |
1 files changed, 663 insertions, 0 deletions
diff --git a/kernel/drivers/mmc/host/sdhci.h b/kernel/drivers/mmc/host/sdhci.h new file mode 100644 index 000000000..e639b7f43 --- /dev/null +++ b/kernel/drivers/mmc/host/sdhci.h @@ -0,0 +1,663 @@ +/* + * linux/drivers/mmc/host/sdhci.h - Secure Digital Host Controller Interface driver + * + * Header file for Host Controller registers and I/O accessors. + * + * Copyright (C) 2005-2008 Pierre Ossman, All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or (at + * your option) any later version. + */ +#ifndef __SDHCI_HW_H +#define __SDHCI_HW_H + +#include <linux/scatterlist.h> +#include <linux/compiler.h> +#include <linux/types.h> +#include <linux/io.h> + +#include <linux/mmc/host.h> + +/* + * Controller registers + */ + +#define SDHCI_DMA_ADDRESS 0x00 +#define SDHCI_ARGUMENT2 SDHCI_DMA_ADDRESS + +#define SDHCI_BLOCK_SIZE 0x04 +#define SDHCI_MAKE_BLKSZ(dma, blksz) (((dma & 0x7) << 12) | (blksz & 0xFFF)) + +#define SDHCI_BLOCK_COUNT 0x06 + +#define SDHCI_ARGUMENT 0x08 + +#define SDHCI_TRANSFER_MODE 0x0C +#define SDHCI_TRNS_DMA 0x01 +#define SDHCI_TRNS_BLK_CNT_EN 0x02 +#define SDHCI_TRNS_AUTO_CMD12 0x04 +#define SDHCI_TRNS_AUTO_CMD23 0x08 +#define SDHCI_TRNS_READ 0x10 +#define SDHCI_TRNS_MULTI 0x20 + +#define SDHCI_COMMAND 0x0E +#define SDHCI_CMD_RESP_MASK 0x03 +#define SDHCI_CMD_CRC 0x08 +#define SDHCI_CMD_INDEX 0x10 +#define SDHCI_CMD_DATA 0x20 +#define SDHCI_CMD_ABORTCMD 0xC0 + +#define SDHCI_CMD_RESP_NONE 0x00 +#define SDHCI_CMD_RESP_LONG 0x01 +#define SDHCI_CMD_RESP_SHORT 0x02 +#define SDHCI_CMD_RESP_SHORT_BUSY 0x03 + +#define SDHCI_MAKE_CMD(c, f) (((c & 0xff) << 8) | (f & 0xff)) +#define SDHCI_GET_CMD(c) ((c>>8) & 0x3f) + +#define SDHCI_RESPONSE 0x10 + +#define SDHCI_BUFFER 0x20 + +#define SDHCI_PRESENT_STATE 0x24 +#define SDHCI_CMD_INHIBIT 0x00000001 +#define SDHCI_DATA_INHIBIT 0x00000002 +#define SDHCI_DOING_WRITE 0x00000100 +#define SDHCI_DOING_READ 0x00000200 +#define SDHCI_SPACE_AVAILABLE 0x00000400 +#define SDHCI_DATA_AVAILABLE 0x00000800 +#define SDHCI_CARD_PRESENT 0x00010000 +#define SDHCI_WRITE_PROTECT 0x00080000 +#define SDHCI_DATA_LVL_MASK 0x00F00000 +#define SDHCI_DATA_LVL_SHIFT 20 +#define SDHCI_DATA_0_LVL_MASK 0x00100000 + +#define SDHCI_HOST_CONTROL 0x28 +#define SDHCI_CTRL_LED 0x01 +#define SDHCI_CTRL_4BITBUS 0x02 +#define SDHCI_CTRL_HISPD 0x04 +#define SDHCI_CTRL_DMA_MASK 0x18 +#define SDHCI_CTRL_SDMA 0x00 +#define SDHCI_CTRL_ADMA1 0x08 +#define SDHCI_CTRL_ADMA32 0x10 +#define SDHCI_CTRL_ADMA64 0x18 +#define SDHCI_CTRL_8BITBUS 0x20 + +#define SDHCI_POWER_CONTROL 0x29 +#define SDHCI_POWER_ON 0x01 +#define SDHCI_POWER_180 0x0A +#define SDHCI_POWER_300 0x0C +#define SDHCI_POWER_330 0x0E + +#define SDHCI_BLOCK_GAP_CONTROL 0x2A + +#define SDHCI_WAKE_UP_CONTROL 0x2B +#define SDHCI_WAKE_ON_INT 0x01 +#define SDHCI_WAKE_ON_INSERT 0x02 +#define SDHCI_WAKE_ON_REMOVE 0x04 + +#define SDHCI_CLOCK_CONTROL 0x2C +#define SDHCI_DIVIDER_SHIFT 8 +#define SDHCI_DIVIDER_HI_SHIFT 6 +#define SDHCI_DIV_MASK 0xFF +#define SDHCI_DIV_MASK_LEN 8 +#define SDHCI_DIV_HI_MASK 0x300 +#define SDHCI_PROG_CLOCK_MODE 0x0020 +#define SDHCI_CLOCK_CARD_EN 0x0004 +#define SDHCI_CLOCK_INT_STABLE 0x0002 +#define SDHCI_CLOCK_INT_EN 0x0001 + +#define SDHCI_TIMEOUT_CONTROL 0x2E + +#define SDHCI_SOFTWARE_RESET 0x2F +#define SDHCI_RESET_ALL 0x01 +#define SDHCI_RESET_CMD 0x02 +#define SDHCI_RESET_DATA 0x04 + +#define SDHCI_INT_STATUS 0x30 +#define SDHCI_INT_ENABLE 0x34 +#define SDHCI_SIGNAL_ENABLE 0x38 +#define SDHCI_INT_RESPONSE 0x00000001 +#define SDHCI_INT_DATA_END 0x00000002 +#define SDHCI_INT_BLK_GAP 0x00000004 +#define SDHCI_INT_DMA_END 0x00000008 +#define SDHCI_INT_SPACE_AVAIL 0x00000010 +#define SDHCI_INT_DATA_AVAIL 0x00000020 +#define SDHCI_INT_CARD_INSERT 0x00000040 +#define SDHCI_INT_CARD_REMOVE 0x00000080 +#define SDHCI_INT_CARD_INT 0x00000100 +#define SDHCI_INT_ERROR 0x00008000 +#define SDHCI_INT_TIMEOUT 0x00010000 +#define SDHCI_INT_CRC 0x00020000 +#define SDHCI_INT_END_BIT 0x00040000 +#define SDHCI_INT_INDEX 0x00080000 +#define SDHCI_INT_DATA_TIMEOUT 0x00100000 +#define SDHCI_INT_DATA_CRC 0x00200000 +#define SDHCI_INT_DATA_END_BIT 0x00400000 +#define SDHCI_INT_BUS_POWER 0x00800000 +#define SDHCI_INT_ACMD12ERR 0x01000000 +#define SDHCI_INT_ADMA_ERROR 0x02000000 + +#define SDHCI_INT_NORMAL_MASK 0x00007FFF +#define SDHCI_INT_ERROR_MASK 0xFFFF8000 + +#define SDHCI_INT_CMD_MASK (SDHCI_INT_RESPONSE | SDHCI_INT_TIMEOUT | \ + SDHCI_INT_CRC | SDHCI_INT_END_BIT | SDHCI_INT_INDEX) +#define SDHCI_INT_DATA_MASK (SDHCI_INT_DATA_END | SDHCI_INT_DMA_END | \ + SDHCI_INT_DATA_AVAIL | SDHCI_INT_SPACE_AVAIL | \ + SDHCI_INT_DATA_TIMEOUT | SDHCI_INT_DATA_CRC | \ + SDHCI_INT_DATA_END_BIT | SDHCI_INT_ADMA_ERROR | \ + SDHCI_INT_BLK_GAP) +#define SDHCI_INT_ALL_MASK ((unsigned int)-1) + +#define SDHCI_ACMD12_ERR 0x3C + +#define SDHCI_HOST_CONTROL2 0x3E +#define SDHCI_CTRL_UHS_MASK 0x0007 +#define SDHCI_CTRL_UHS_SDR12 0x0000 +#define SDHCI_CTRL_UHS_SDR25 0x0001 +#define SDHCI_CTRL_UHS_SDR50 0x0002 +#define SDHCI_CTRL_UHS_SDR104 0x0003 +#define SDHCI_CTRL_UHS_DDR50 0x0004 +#define SDHCI_CTRL_HS400 0x0005 /* Non-standard */ +#define SDHCI_CTRL_VDD_180 0x0008 +#define SDHCI_CTRL_DRV_TYPE_MASK 0x0030 +#define SDHCI_CTRL_DRV_TYPE_B 0x0000 +#define SDHCI_CTRL_DRV_TYPE_A 0x0010 +#define SDHCI_CTRL_DRV_TYPE_C 0x0020 +#define SDHCI_CTRL_DRV_TYPE_D 0x0030 +#define SDHCI_CTRL_EXEC_TUNING 0x0040 +#define SDHCI_CTRL_TUNED_CLK 0x0080 +#define SDHCI_CTRL_PRESET_VAL_ENABLE 0x8000 + +#define SDHCI_CAPABILITIES 0x40 +#define SDHCI_TIMEOUT_CLK_MASK 0x0000003F +#define SDHCI_TIMEOUT_CLK_SHIFT 0 +#define SDHCI_TIMEOUT_CLK_UNIT 0x00000080 +#define SDHCI_CLOCK_BASE_MASK 0x00003F00 +#define SDHCI_CLOCK_V3_BASE_MASK 0x0000FF00 +#define SDHCI_CLOCK_BASE_SHIFT 8 +#define SDHCI_MAX_BLOCK_MASK 0x00030000 +#define SDHCI_MAX_BLOCK_SHIFT 16 +#define SDHCI_CAN_DO_8BIT 0x00040000 +#define SDHCI_CAN_DO_ADMA2 0x00080000 +#define SDHCI_CAN_DO_ADMA1 0x00100000 +#define SDHCI_CAN_DO_HISPD 0x00200000 +#define SDHCI_CAN_DO_SDMA 0x00400000 +#define SDHCI_CAN_VDD_330 0x01000000 +#define SDHCI_CAN_VDD_300 0x02000000 +#define SDHCI_CAN_VDD_180 0x04000000 +#define SDHCI_CAN_64BIT 0x10000000 + +#define SDHCI_SUPPORT_SDR50 0x00000001 +#define SDHCI_SUPPORT_SDR104 0x00000002 +#define SDHCI_SUPPORT_DDR50 0x00000004 +#define SDHCI_DRIVER_TYPE_A 0x00000010 +#define SDHCI_DRIVER_TYPE_C 0x00000020 +#define SDHCI_DRIVER_TYPE_D 0x00000040 +#define SDHCI_RETUNING_TIMER_COUNT_MASK 0x00000F00 +#define SDHCI_RETUNING_TIMER_COUNT_SHIFT 8 +#define SDHCI_USE_SDR50_TUNING 0x00002000 +#define SDHCI_RETUNING_MODE_MASK 0x0000C000 +#define SDHCI_RETUNING_MODE_SHIFT 14 +#define SDHCI_CLOCK_MUL_MASK 0x00FF0000 +#define SDHCI_CLOCK_MUL_SHIFT 16 +#define SDHCI_SUPPORT_HS400 0x80000000 /* Non-standard */ + +#define SDHCI_CAPABILITIES_1 0x44 + +#define SDHCI_MAX_CURRENT 0x48 +#define SDHCI_MAX_CURRENT_LIMIT 0xFF +#define SDHCI_MAX_CURRENT_330_MASK 0x0000FF +#define SDHCI_MAX_CURRENT_330_SHIFT 0 +#define SDHCI_MAX_CURRENT_300_MASK 0x00FF00 +#define SDHCI_MAX_CURRENT_300_SHIFT 8 +#define SDHCI_MAX_CURRENT_180_MASK 0xFF0000 +#define SDHCI_MAX_CURRENT_180_SHIFT 16 +#define SDHCI_MAX_CURRENT_MULTIPLIER 4 + +/* 4C-4F reserved for more max current */ + +#define SDHCI_SET_ACMD12_ERROR 0x50 +#define SDHCI_SET_INT_ERROR 0x52 + +#define SDHCI_ADMA_ERROR 0x54 + +/* 55-57 reserved */ + +#define SDHCI_ADMA_ADDRESS 0x58 +#define SDHCI_ADMA_ADDRESS_HI 0x5C + +/* 60-FB reserved */ + +#define SDHCI_PRESET_FOR_SDR12 0x66 +#define SDHCI_PRESET_FOR_SDR25 0x68 +#define SDHCI_PRESET_FOR_SDR50 0x6A +#define SDHCI_PRESET_FOR_SDR104 0x6C +#define SDHCI_PRESET_FOR_DDR50 0x6E +#define SDHCI_PRESET_FOR_HS400 0x74 /* Non-standard */ +#define SDHCI_PRESET_DRV_MASK 0xC000 +#define SDHCI_PRESET_DRV_SHIFT 14 +#define SDHCI_PRESET_CLKGEN_SEL_MASK 0x400 +#define SDHCI_PRESET_CLKGEN_SEL_SHIFT 10 +#define SDHCI_PRESET_SDCLK_FREQ_MASK 0x3FF +#define SDHCI_PRESET_SDCLK_FREQ_SHIFT 0 + +#define SDHCI_SLOT_INT_STATUS 0xFC + +#define SDHCI_HOST_VERSION 0xFE +#define SDHCI_VENDOR_VER_MASK 0xFF00 +#define SDHCI_VENDOR_VER_SHIFT 8 +#define SDHCI_SPEC_VER_MASK 0x00FF +#define SDHCI_SPEC_VER_SHIFT 0 +#define SDHCI_SPEC_100 0 +#define SDHCI_SPEC_200 1 +#define SDHCI_SPEC_300 2 + +/* + * End of controller registers. + */ + +#define SDHCI_MAX_DIV_SPEC_200 256 +#define SDHCI_MAX_DIV_SPEC_300 2046 + +/* + * Host SDMA buffer boundary. Valid values from 4K to 512K in powers of 2. + */ +#define SDHCI_DEFAULT_BOUNDARY_SIZE (512 * 1024) +#define SDHCI_DEFAULT_BOUNDARY_ARG (ilog2(SDHCI_DEFAULT_BOUNDARY_SIZE) - 12) + +/* ADMA2 32-bit DMA descriptor size */ +#define SDHCI_ADMA2_32_DESC_SZ 8 + +/* ADMA2 32-bit DMA alignment */ +#define SDHCI_ADMA2_32_ALIGN 4 + +/* ADMA2 32-bit descriptor */ +struct sdhci_adma2_32_desc { + __le16 cmd; + __le16 len; + __le32 addr; +} __packed __aligned(SDHCI_ADMA2_32_ALIGN); + +/* ADMA2 64-bit DMA descriptor size */ +#define SDHCI_ADMA2_64_DESC_SZ 12 + +/* ADMA2 64-bit DMA alignment */ +#define SDHCI_ADMA2_64_ALIGN 8 + +/* + * ADMA2 64-bit descriptor. Note 12-byte descriptor can't always be 8-byte + * aligned. + */ +struct sdhci_adma2_64_desc { + __le16 cmd; + __le16 len; + __le32 addr_lo; + __le32 addr_hi; +} __packed __aligned(4); + +#define ADMA2_TRAN_VALID 0x21 +#define ADMA2_NOP_END_VALID 0x3 +#define ADMA2_END 0x2 + +/* + * Maximum segments assuming a 512KiB maximum requisition size and a minimum + * 4KiB page size. + */ +#define SDHCI_MAX_SEGS 128 + +struct sdhci_host_next { + unsigned int sg_count; + s32 cookie; +}; + +struct sdhci_host { + /* Data set by hardware interface driver */ + const char *hw_name; /* Hardware bus name */ + + unsigned int quirks; /* Deviations from spec. */ + +/* Controller doesn't honor resets unless we touch the clock register */ +#define SDHCI_QUIRK_CLOCK_BEFORE_RESET (1<<0) +/* Controller has bad caps bits, but really supports DMA */ +#define SDHCI_QUIRK_FORCE_DMA (1<<1) +/* Controller doesn't like to be reset when there is no card inserted. */ +#define SDHCI_QUIRK_NO_CARD_NO_RESET (1<<2) +/* Controller doesn't like clearing the power reg before a change */ +#define SDHCI_QUIRK_SINGLE_POWER_WRITE (1<<3) +/* Controller has flaky internal state so reset it on each ios change */ +#define SDHCI_QUIRK_RESET_CMD_DATA_ON_IOS (1<<4) +/* Controller has an unusable DMA engine */ +#define SDHCI_QUIRK_BROKEN_DMA (1<<5) +/* Controller has an unusable ADMA engine */ +#define SDHCI_QUIRK_BROKEN_ADMA (1<<6) +/* Controller can only DMA from 32-bit aligned addresses */ +#define SDHCI_QUIRK_32BIT_DMA_ADDR (1<<7) +/* Controller can only DMA chunk sizes that are a multiple of 32 bits */ +#define SDHCI_QUIRK_32BIT_DMA_SIZE (1<<8) +/* Controller can only ADMA chunks that are a multiple of 32 bits */ +#define SDHCI_QUIRK_32BIT_ADMA_SIZE (1<<9) +/* Controller needs to be reset after each request to stay stable */ +#define SDHCI_QUIRK_RESET_AFTER_REQUEST (1<<10) +/* Controller needs voltage and power writes to happen separately */ +#define SDHCI_QUIRK_NO_SIMULT_VDD_AND_POWER (1<<11) +/* Controller provides an incorrect timeout value for transfers */ +#define SDHCI_QUIRK_BROKEN_TIMEOUT_VAL (1<<12) +/* Controller has an issue with buffer bits for small transfers */ +#define SDHCI_QUIRK_BROKEN_SMALL_PIO (1<<13) +/* Controller does not provide transfer-complete interrupt when not busy */ +#define SDHCI_QUIRK_NO_BUSY_IRQ (1<<14) +/* Controller has unreliable card detection */ +#define SDHCI_QUIRK_BROKEN_CARD_DETECTION (1<<15) +/* Controller reports inverted write-protect state */ +#define SDHCI_QUIRK_INVERTED_WRITE_PROTECT (1<<16) +/* Controller does not like fast PIO transfers */ +#define SDHCI_QUIRK_PIO_NEEDS_DELAY (1<<18) +/* Controller has to be forced to use block size of 2048 bytes */ +#define SDHCI_QUIRK_FORCE_BLK_SZ_2048 (1<<20) +/* Controller cannot do multi-block transfers */ +#define SDHCI_QUIRK_NO_MULTIBLOCK (1<<21) +/* Controller can only handle 1-bit data transfers */ +#define SDHCI_QUIRK_FORCE_1_BIT_DATA (1<<22) +/* Controller needs 10ms delay between applying power and clock */ +#define SDHCI_QUIRK_DELAY_AFTER_POWER (1<<23) +/* Controller uses SDCLK instead of TMCLK for data timeouts */ +#define SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK (1<<24) +/* Controller reports wrong base clock capability */ +#define SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN (1<<25) +/* Controller cannot support End Attribute in NOP ADMA descriptor */ +#define SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC (1<<26) +/* Controller is missing device caps. Use caps provided by host */ +#define SDHCI_QUIRK_MISSING_CAPS (1<<27) +/* Controller uses Auto CMD12 command to stop the transfer */ +#define SDHCI_QUIRK_MULTIBLOCK_READ_ACMD12 (1<<28) +/* Controller doesn't have HISPD bit field in HI-SPEED SD card */ +#define SDHCI_QUIRK_NO_HISPD_BIT (1<<29) +/* Controller treats ADMA descriptors with length 0000h incorrectly */ +#define SDHCI_QUIRK_BROKEN_ADMA_ZEROLEN_DESC (1<<30) +/* The read-only detection via SDHCI_PRESENT_STATE register is unstable */ +#define SDHCI_QUIRK_UNSTABLE_RO_DETECT (1<<31) + + unsigned int quirks2; /* More deviations from spec. */ + +#define SDHCI_QUIRK2_HOST_OFF_CARD_ON (1<<0) +#define SDHCI_QUIRK2_HOST_NO_CMD23 (1<<1) +/* The system physically doesn't support 1.8v, even if the host does */ +#define SDHCI_QUIRK2_NO_1_8_V (1<<2) +#define SDHCI_QUIRK2_PRESET_VALUE_BROKEN (1<<3) +#define SDHCI_QUIRK2_CARD_ON_NEEDS_BUS_ON (1<<4) +/* Controller has a non-standard host control register */ +#define SDHCI_QUIRK2_BROKEN_HOST_CONTROL (1<<5) +/* Controller does not support HS200 */ +#define SDHCI_QUIRK2_BROKEN_HS200 (1<<6) +/* Controller does not support DDR50 */ +#define SDHCI_QUIRK2_BROKEN_DDR50 (1<<7) +/* Stop command (CMD12) can set Transfer Complete when not using MMC_RSP_BUSY */ +#define SDHCI_QUIRK2_STOP_WITH_TC (1<<8) +/* Controller does not support 64-bit DMA */ +#define SDHCI_QUIRK2_BROKEN_64_BIT_DMA (1<<9) +/* need clear transfer mode register before send cmd */ +#define SDHCI_QUIRK2_CLEAR_TRANSFERMODE_REG_BEFORE_CMD (1<<10) +/* Capability register bit-63 indicates HS400 support */ +#define SDHCI_QUIRK2_CAPS_BIT63_FOR_HS400 (1<<11) +/* forced tuned clock */ +#define SDHCI_QUIRK2_TUNING_WORK_AROUND (1<<12) +/* disable the block count for single block transactions */ +#define SDHCI_QUIRK2_SUPPORT_SINGLE (1<<13) +/* Controller broken with using ACMD23 */ +#define SDHCI_QUIRK2_ACMD23_BROKEN (1<<14) + + int irq; /* Device IRQ */ + void __iomem *ioaddr; /* Mapped address */ + + const struct sdhci_ops *ops; /* Low level hw interface */ + + /* Internal data */ + struct mmc_host *mmc; /* MMC structure */ + u64 dma_mask; /* custom DMA mask */ + +#if defined(CONFIG_LEDS_CLASS) || defined(CONFIG_LEDS_CLASS_MODULE) + struct led_classdev led; /* LED control */ + char led_name[32]; +#endif + + spinlock_t lock; /* Mutex */ + + int flags; /* Host attributes */ +#define SDHCI_USE_SDMA (1<<0) /* Host is SDMA capable */ +#define SDHCI_USE_ADMA (1<<1) /* Host is ADMA capable */ +#define SDHCI_REQ_USE_DMA (1<<2) /* Use DMA for this req. */ +#define SDHCI_DEVICE_DEAD (1<<3) /* Device unresponsive */ +#define SDHCI_SDR50_NEEDS_TUNING (1<<4) /* SDR50 needs tuning */ +#define SDHCI_NEEDS_RETUNING (1<<5) /* Host needs retuning */ +#define SDHCI_AUTO_CMD12 (1<<6) /* Auto CMD12 support */ +#define SDHCI_AUTO_CMD23 (1<<7) /* Auto CMD23 support */ +#define SDHCI_PV_ENABLED (1<<8) /* Preset value enabled */ +#define SDHCI_SDIO_IRQ_ENABLED (1<<9) /* SDIO irq enabled */ +#define SDHCI_SDR104_NEEDS_TUNING (1<<10) /* SDR104/HS200 needs tuning */ +#define SDHCI_USING_RETUNING_TIMER (1<<11) /* Host is using a retuning timer for the card */ +#define SDHCI_USE_64_BIT_DMA (1<<12) /* Use 64-bit DMA */ +#define SDHCI_HS400_TUNING (1<<13) /* Tuning for HS400 */ + + unsigned int version; /* SDHCI spec. version */ + + unsigned int max_clk; /* Max possible freq (MHz) */ + unsigned int timeout_clk; /* Timeout freq (KHz) */ + unsigned int clk_mul; /* Clock Muliplier value */ + + unsigned int clock; /* Current clock (MHz) */ + u8 pwr; /* Current voltage */ + + bool runtime_suspended; /* Host is runtime suspended */ + bool bus_on; /* Bus power prevents runtime suspend */ + bool preset_enabled; /* Preset is enabled */ + + struct mmc_request *mrq; /* Current request */ + struct mmc_command *cmd; /* Current command */ + struct mmc_data *data; /* Current data request */ + unsigned int data_early:1; /* Data finished before cmd */ + unsigned int busy_handle:1; /* Handling the order of Busy-end */ + + struct sg_mapping_iter sg_miter; /* SG state for PIO */ + unsigned int blocks; /* remaining PIO blocks */ + + int sg_count; /* Mapped sg entries */ + + void *adma_table; /* ADMA descriptor table */ + void *align_buffer; /* Bounce buffer */ + + size_t adma_table_sz; /* ADMA descriptor table size */ + size_t align_buffer_sz; /* Bounce buffer size */ + + dma_addr_t adma_addr; /* Mapped ADMA descr. table */ + dma_addr_t align_addr; /* Mapped bounce buffer */ + + unsigned int desc_sz; /* ADMA descriptor size */ + unsigned int align_sz; /* ADMA alignment */ + unsigned int align_mask; /* ADMA alignment mask */ + + struct tasklet_struct finish_tasklet; /* Tasklet structures */ + + struct timer_list timer; /* Timer for timeouts */ + + u32 caps; /* Alternative CAPABILITY_0 */ + u32 caps1; /* Alternative CAPABILITY_1 */ + + unsigned int ocr_avail_sdio; /* OCR bit masks */ + unsigned int ocr_avail_sd; + unsigned int ocr_avail_mmc; + u32 ocr_mask; /* available voltages */ + + unsigned timing; /* Current timing */ + + u32 thread_isr; + + /* cached registers */ + u32 ier; + + wait_queue_head_t buf_ready_int; /* Waitqueue for Buffer Read Ready interrupt */ + unsigned int tuning_done; /* Condition flag set when CMD19 succeeds */ + + unsigned int tuning_count; /* Timer count for re-tuning */ + unsigned int tuning_mode; /* Re-tuning mode supported by host */ +#define SDHCI_TUNING_MODE_1 0 + struct timer_list tuning_timer; /* Timer for tuning */ + + struct sdhci_host_next next_data; + unsigned long private[0] ____cacheline_aligned; +}; + +struct sdhci_ops { +#ifdef CONFIG_MMC_SDHCI_IO_ACCESSORS + u32 (*read_l)(struct sdhci_host *host, int reg); + u16 (*read_w)(struct sdhci_host *host, int reg); + u8 (*read_b)(struct sdhci_host *host, int reg); + void (*write_l)(struct sdhci_host *host, u32 val, int reg); + void (*write_w)(struct sdhci_host *host, u16 val, int reg); + void (*write_b)(struct sdhci_host *host, u8 val, int reg); +#endif + + void (*set_clock)(struct sdhci_host *host, unsigned int clock); + + int (*enable_dma)(struct sdhci_host *host); + unsigned int (*get_max_clock)(struct sdhci_host *host); + unsigned int (*get_min_clock)(struct sdhci_host *host); + unsigned int (*get_timeout_clock)(struct sdhci_host *host); + unsigned int (*get_max_timeout_count)(struct sdhci_host *host); + void (*set_timeout)(struct sdhci_host *host, + struct mmc_command *cmd); + void (*set_bus_width)(struct sdhci_host *host, int width); + void (*platform_send_init_74_clocks)(struct sdhci_host *host, + u8 power_mode); + unsigned int (*get_ro)(struct sdhci_host *host); + void (*reset)(struct sdhci_host *host, u8 mask); + int (*platform_execute_tuning)(struct sdhci_host *host, u32 opcode); + void (*set_uhs_signaling)(struct sdhci_host *host, unsigned int uhs); + void (*hw_reset)(struct sdhci_host *host); + void (*adma_workaround)(struct sdhci_host *host, u32 intmask); + void (*platform_init)(struct sdhci_host *host); + void (*card_event)(struct sdhci_host *host); + void (*voltage_switch)(struct sdhci_host *host); +}; + +#ifdef CONFIG_MMC_SDHCI_IO_ACCESSORS + +static inline void sdhci_writel(struct sdhci_host *host, u32 val, int reg) +{ + if (unlikely(host->ops->write_l)) + host->ops->write_l(host, val, reg); + else + writel(val, host->ioaddr + reg); +} + +static inline void sdhci_writew(struct sdhci_host *host, u16 val, int reg) +{ + if (unlikely(host->ops->write_w)) + host->ops->write_w(host, val, reg); + else + writew(val, host->ioaddr + reg); +} + +static inline void sdhci_writeb(struct sdhci_host *host, u8 val, int reg) +{ + if (unlikely(host->ops->write_b)) + host->ops->write_b(host, val, reg); + else + writeb(val, host->ioaddr + reg); +} + +static inline u32 sdhci_readl(struct sdhci_host *host, int reg) +{ + if (unlikely(host->ops->read_l)) + return host->ops->read_l(host, reg); + else + return readl(host->ioaddr + reg); +} + +static inline u16 sdhci_readw(struct sdhci_host *host, int reg) +{ + if (unlikely(host->ops->read_w)) + return host->ops->read_w(host, reg); + else + return readw(host->ioaddr + reg); +} + +static inline u8 sdhci_readb(struct sdhci_host *host, int reg) +{ + if (unlikely(host->ops->read_b)) + return host->ops->read_b(host, reg); + else + return readb(host->ioaddr + reg); +} + +#else + +static inline void sdhci_writel(struct sdhci_host *host, u32 val, int reg) +{ + writel(val, host->ioaddr + reg); +} + +static inline void sdhci_writew(struct sdhci_host *host, u16 val, int reg) +{ + writew(val, host->ioaddr + reg); +} + +static inline void sdhci_writeb(struct sdhci_host *host, u8 val, int reg) +{ + writeb(val, host->ioaddr + reg); +} + +static inline u32 sdhci_readl(struct sdhci_host *host, int reg) +{ + return readl(host->ioaddr + reg); +} + +static inline u16 sdhci_readw(struct sdhci_host *host, int reg) +{ + return readw(host->ioaddr + reg); +} + +static inline u8 sdhci_readb(struct sdhci_host *host, int reg) +{ + return readb(host->ioaddr + reg); +} + +#endif /* CONFIG_MMC_SDHCI_IO_ACCESSORS */ + +extern struct sdhci_host *sdhci_alloc_host(struct device *dev, + size_t priv_size); +extern void sdhci_free_host(struct sdhci_host *host); + +static inline void *sdhci_priv(struct sdhci_host *host) +{ + return (void *)host->private; +} + +extern void sdhci_card_detect(struct sdhci_host *host); +extern int sdhci_add_host(struct sdhci_host *host); +extern void sdhci_remove_host(struct sdhci_host *host, int dead); +extern void sdhci_send_command(struct sdhci_host *host, + struct mmc_command *cmd); + +static inline bool sdhci_sdio_irq_enabled(struct sdhci_host *host) +{ + return !!(host->flags & SDHCI_SDIO_IRQ_ENABLED); +} + +void sdhci_set_clock(struct sdhci_host *host, unsigned int clock); +void sdhci_set_bus_width(struct sdhci_host *host, int width); +void sdhci_reset(struct sdhci_host *host, u8 mask); +void sdhci_set_uhs_signaling(struct sdhci_host *host, unsigned timing); + +#ifdef CONFIG_PM +extern int sdhci_suspend_host(struct sdhci_host *host); +extern int sdhci_resume_host(struct sdhci_host *host); +extern void sdhci_enable_irq_wakeups(struct sdhci_host *host); +extern int sdhci_runtime_suspend_host(struct sdhci_host *host); +extern int sdhci_runtime_resume_host(struct sdhci_host *host); +#endif + +#endif /* __SDHCI_HW_H */ |