summaryrefslogtreecommitdiffstats
path: root/kernel/drivers/mmc/host/sdhci.c
diff options
context:
space:
mode:
Diffstat (limited to 'kernel/drivers/mmc/host/sdhci.c')
-rw-r--r--kernel/drivers/mmc/host/sdhci.c3590
1 files changed, 3590 insertions, 0 deletions
diff --git a/kernel/drivers/mmc/host/sdhci.c b/kernel/drivers/mmc/host/sdhci.c
new file mode 100644
index 000000000..f09bc10c9
--- /dev/null
+++ b/kernel/drivers/mmc/host/sdhci.c
@@ -0,0 +1,3590 @@
+/*
+ * linux/drivers/mmc/host/sdhci.c - Secure Digital Host Controller Interface driver
+ *
+ * Copyright (C) 2005-2008 Pierre Ossman, All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or (at
+ * your option) any later version.
+ *
+ * Thanks to the following companies for their support:
+ *
+ * - JMicron (hardware and technical support)
+ */
+
+#include <linux/delay.h>
+#include <linux/highmem.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/dma-mapping.h>
+#include <linux/slab.h>
+#include <linux/scatterlist.h>
+#include <linux/regulator/consumer.h>
+#include <linux/pm_runtime.h>
+
+#include <linux/leds.h>
+
+#include <linux/mmc/mmc.h>
+#include <linux/mmc/host.h>
+#include <linux/mmc/card.h>
+#include <linux/mmc/sdio.h>
+#include <linux/mmc/slot-gpio.h>
+
+#include "sdhci.h"
+
+#define DRIVER_NAME "sdhci"
+
+#define DBG(f, x...) \
+ pr_debug(DRIVER_NAME " [%s()]: " f, __func__,## x)
+
+#if defined(CONFIG_LEDS_CLASS) || (defined(CONFIG_LEDS_CLASS_MODULE) && \
+ defined(CONFIG_MMC_SDHCI_MODULE))
+#define SDHCI_USE_LEDS_CLASS
+#endif
+
+#define MAX_TUNING_LOOP 40
+
+static unsigned int debug_quirks = 0;
+static unsigned int debug_quirks2;
+
+static void sdhci_finish_data(struct sdhci_host *);
+
+static void sdhci_finish_command(struct sdhci_host *);
+static int sdhci_execute_tuning(struct mmc_host *mmc, u32 opcode);
+static void sdhci_tuning_timer(unsigned long data);
+static void sdhci_enable_preset_value(struct sdhci_host *host, bool enable);
+static int sdhci_pre_dma_transfer(struct sdhci_host *host,
+ struct mmc_data *data,
+ struct sdhci_host_next *next);
+static int sdhci_do_get_cd(struct sdhci_host *host);
+
+#ifdef CONFIG_PM
+static int sdhci_runtime_pm_get(struct sdhci_host *host);
+static int sdhci_runtime_pm_put(struct sdhci_host *host);
+static void sdhci_runtime_pm_bus_on(struct sdhci_host *host);
+static void sdhci_runtime_pm_bus_off(struct sdhci_host *host);
+#else
+static inline int sdhci_runtime_pm_get(struct sdhci_host *host)
+{
+ return 0;
+}
+static inline int sdhci_runtime_pm_put(struct sdhci_host *host)
+{
+ return 0;
+}
+static void sdhci_runtime_pm_bus_on(struct sdhci_host *host)
+{
+}
+static void sdhci_runtime_pm_bus_off(struct sdhci_host *host)
+{
+}
+#endif
+
+static void sdhci_dumpregs(struct sdhci_host *host)
+{
+ pr_debug(DRIVER_NAME ": =========== REGISTER DUMP (%s)===========\n",
+ mmc_hostname(host->mmc));
+
+ pr_debug(DRIVER_NAME ": Sys addr: 0x%08x | Version: 0x%08x\n",
+ sdhci_readl(host, SDHCI_DMA_ADDRESS),
+ sdhci_readw(host, SDHCI_HOST_VERSION));
+ pr_debug(DRIVER_NAME ": Blk size: 0x%08x | Blk cnt: 0x%08x\n",
+ sdhci_readw(host, SDHCI_BLOCK_SIZE),
+ sdhci_readw(host, SDHCI_BLOCK_COUNT));
+ pr_debug(DRIVER_NAME ": Argument: 0x%08x | Trn mode: 0x%08x\n",
+ sdhci_readl(host, SDHCI_ARGUMENT),
+ sdhci_readw(host, SDHCI_TRANSFER_MODE));
+ pr_debug(DRIVER_NAME ": Present: 0x%08x | Host ctl: 0x%08x\n",
+ sdhci_readl(host, SDHCI_PRESENT_STATE),
+ sdhci_readb(host, SDHCI_HOST_CONTROL));
+ pr_debug(DRIVER_NAME ": Power: 0x%08x | Blk gap: 0x%08x\n",
+ sdhci_readb(host, SDHCI_POWER_CONTROL),
+ sdhci_readb(host, SDHCI_BLOCK_GAP_CONTROL));
+ pr_debug(DRIVER_NAME ": Wake-up: 0x%08x | Clock: 0x%08x\n",
+ sdhci_readb(host, SDHCI_WAKE_UP_CONTROL),
+ sdhci_readw(host, SDHCI_CLOCK_CONTROL));
+ pr_debug(DRIVER_NAME ": Timeout: 0x%08x | Int stat: 0x%08x\n",
+ sdhci_readb(host, SDHCI_TIMEOUT_CONTROL),
+ sdhci_readl(host, SDHCI_INT_STATUS));
+ pr_debug(DRIVER_NAME ": Int enab: 0x%08x | Sig enab: 0x%08x\n",
+ sdhci_readl(host, SDHCI_INT_ENABLE),
+ sdhci_readl(host, SDHCI_SIGNAL_ENABLE));
+ pr_debug(DRIVER_NAME ": AC12 err: 0x%08x | Slot int: 0x%08x\n",
+ sdhci_readw(host, SDHCI_ACMD12_ERR),
+ sdhci_readw(host, SDHCI_SLOT_INT_STATUS));
+ pr_debug(DRIVER_NAME ": Caps: 0x%08x | Caps_1: 0x%08x\n",
+ sdhci_readl(host, SDHCI_CAPABILITIES),
+ sdhci_readl(host, SDHCI_CAPABILITIES_1));
+ pr_debug(DRIVER_NAME ": Cmd: 0x%08x | Max curr: 0x%08x\n",
+ sdhci_readw(host, SDHCI_COMMAND),
+ sdhci_readl(host, SDHCI_MAX_CURRENT));
+ pr_debug(DRIVER_NAME ": Host ctl2: 0x%08x\n",
+ sdhci_readw(host, SDHCI_HOST_CONTROL2));
+
+ if (host->flags & SDHCI_USE_ADMA) {
+ if (host->flags & SDHCI_USE_64_BIT_DMA)
+ pr_debug(DRIVER_NAME ": ADMA Err: 0x%08x | ADMA Ptr: 0x%08x%08x\n",
+ readl(host->ioaddr + SDHCI_ADMA_ERROR),
+ readl(host->ioaddr + SDHCI_ADMA_ADDRESS_HI),
+ readl(host->ioaddr + SDHCI_ADMA_ADDRESS));
+ else
+ pr_debug(DRIVER_NAME ": ADMA Err: 0x%08x | ADMA Ptr: 0x%08x\n",
+ readl(host->ioaddr + SDHCI_ADMA_ERROR),
+ readl(host->ioaddr + SDHCI_ADMA_ADDRESS));
+ }
+
+ pr_debug(DRIVER_NAME ": ===========================================\n");
+}
+
+/*****************************************************************************\
+ * *
+ * Low level functions *
+ * *
+\*****************************************************************************/
+
+static void sdhci_set_card_detection(struct sdhci_host *host, bool enable)
+{
+ u32 present;
+
+ if ((host->quirks & SDHCI_QUIRK_BROKEN_CARD_DETECTION) ||
+ (host->mmc->caps & MMC_CAP_NONREMOVABLE))
+ return;
+
+ if (enable) {
+ present = sdhci_readl(host, SDHCI_PRESENT_STATE) &
+ SDHCI_CARD_PRESENT;
+
+ host->ier |= present ? SDHCI_INT_CARD_REMOVE :
+ SDHCI_INT_CARD_INSERT;
+ } else {
+ host->ier &= ~(SDHCI_INT_CARD_REMOVE | SDHCI_INT_CARD_INSERT);
+ }
+
+ sdhci_writel(host, host->ier, SDHCI_INT_ENABLE);
+ sdhci_writel(host, host->ier, SDHCI_SIGNAL_ENABLE);
+}
+
+static void sdhci_enable_card_detection(struct sdhci_host *host)
+{
+ sdhci_set_card_detection(host, true);
+}
+
+static void sdhci_disable_card_detection(struct sdhci_host *host)
+{
+ sdhci_set_card_detection(host, false);
+}
+
+void sdhci_reset(struct sdhci_host *host, u8 mask)
+{
+ unsigned long timeout;
+
+ sdhci_writeb(host, mask, SDHCI_SOFTWARE_RESET);
+
+ if (mask & SDHCI_RESET_ALL) {
+ host->clock = 0;
+ /* Reset-all turns off SD Bus Power */
+ if (host->quirks2 & SDHCI_QUIRK2_CARD_ON_NEEDS_BUS_ON)
+ sdhci_runtime_pm_bus_off(host);
+ }
+
+ /* Wait max 100 ms */
+ timeout = 100;
+
+ /* hw clears the bit when it's done */
+ while (sdhci_readb(host, SDHCI_SOFTWARE_RESET) & mask) {
+ if (timeout == 0) {
+ pr_err("%s: Reset 0x%x never completed.\n",
+ mmc_hostname(host->mmc), (int)mask);
+ sdhci_dumpregs(host);
+ return;
+ }
+ timeout--;
+ mdelay(1);
+ }
+}
+EXPORT_SYMBOL_GPL(sdhci_reset);
+
+static void sdhci_do_reset(struct sdhci_host *host, u8 mask)
+{
+ if (host->quirks & SDHCI_QUIRK_NO_CARD_NO_RESET) {
+ if (!(sdhci_readl(host, SDHCI_PRESENT_STATE) &
+ SDHCI_CARD_PRESENT))
+ return;
+ }
+
+ host->ops->reset(host, mask);
+
+ if (mask & SDHCI_RESET_ALL) {
+ if (host->flags & (SDHCI_USE_SDMA | SDHCI_USE_ADMA)) {
+ if (host->ops->enable_dma)
+ host->ops->enable_dma(host);
+ }
+
+ /* Resetting the controller clears many */
+ host->preset_enabled = false;
+ }
+}
+
+static void sdhci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios);
+
+static void sdhci_init(struct sdhci_host *host, int soft)
+{
+ if (soft)
+ sdhci_do_reset(host, SDHCI_RESET_CMD|SDHCI_RESET_DATA);
+ else
+ sdhci_do_reset(host, SDHCI_RESET_ALL);
+
+ host->ier = SDHCI_INT_BUS_POWER | SDHCI_INT_DATA_END_BIT |
+ SDHCI_INT_DATA_CRC | SDHCI_INT_DATA_TIMEOUT |
+ SDHCI_INT_INDEX | SDHCI_INT_END_BIT | SDHCI_INT_CRC |
+ SDHCI_INT_TIMEOUT | SDHCI_INT_DATA_END |
+ SDHCI_INT_RESPONSE;
+
+ sdhci_writel(host, host->ier, SDHCI_INT_ENABLE);
+ sdhci_writel(host, host->ier, SDHCI_SIGNAL_ENABLE);
+
+ if (soft) {
+ /* force clock reconfiguration */
+ host->clock = 0;
+ sdhci_set_ios(host->mmc, &host->mmc->ios);
+ }
+}
+
+static void sdhci_reinit(struct sdhci_host *host)
+{
+ sdhci_init(host, 0);
+ /*
+ * Retuning stuffs are affected by different cards inserted and only
+ * applicable to UHS-I cards. So reset these fields to their initial
+ * value when card is removed.
+ */
+ if (host->flags & SDHCI_USING_RETUNING_TIMER) {
+ host->flags &= ~SDHCI_USING_RETUNING_TIMER;
+
+ del_timer_sync(&host->tuning_timer);
+ host->flags &= ~SDHCI_NEEDS_RETUNING;
+ }
+ sdhci_enable_card_detection(host);
+}
+
+static void sdhci_activate_led(struct sdhci_host *host)
+{
+ u8 ctrl;
+
+ ctrl = sdhci_readb(host, SDHCI_HOST_CONTROL);
+ ctrl |= SDHCI_CTRL_LED;
+ sdhci_writeb(host, ctrl, SDHCI_HOST_CONTROL);
+}
+
+static void sdhci_deactivate_led(struct sdhci_host *host)
+{
+ u8 ctrl;
+
+ ctrl = sdhci_readb(host, SDHCI_HOST_CONTROL);
+ ctrl &= ~SDHCI_CTRL_LED;
+ sdhci_writeb(host, ctrl, SDHCI_HOST_CONTROL);
+}
+
+#ifdef SDHCI_USE_LEDS_CLASS
+static void sdhci_led_control(struct led_classdev *led,
+ enum led_brightness brightness)
+{
+ struct sdhci_host *host = container_of(led, struct sdhci_host, led);
+ unsigned long flags;
+
+ spin_lock_irqsave(&host->lock, flags);
+
+ if (host->runtime_suspended)
+ goto out;
+
+ if (brightness == LED_OFF)
+ sdhci_deactivate_led(host);
+ else
+ sdhci_activate_led(host);
+out:
+ spin_unlock_irqrestore(&host->lock, flags);
+}
+#endif
+
+/*****************************************************************************\
+ * *
+ * Core functions *
+ * *
+\*****************************************************************************/
+
+static void sdhci_read_block_pio(struct sdhci_host *host)
+{
+ unsigned long flags;
+ size_t blksize, len, chunk;
+ u32 uninitialized_var(scratch);
+ u8 *buf;
+
+ DBG("PIO reading\n");
+
+ blksize = host->data->blksz;
+ chunk = 0;
+
+ local_irq_save(flags);
+
+ while (blksize) {
+ if (!sg_miter_next(&host->sg_miter))
+ BUG();
+
+ len = min(host->sg_miter.length, blksize);
+
+ blksize -= len;
+ host->sg_miter.consumed = len;
+
+ buf = host->sg_miter.addr;
+
+ while (len) {
+ if (chunk == 0) {
+ scratch = sdhci_readl(host, SDHCI_BUFFER);
+ chunk = 4;
+ }
+
+ *buf = scratch & 0xFF;
+
+ buf++;
+ scratch >>= 8;
+ chunk--;
+ len--;
+ }
+ }
+
+ sg_miter_stop(&host->sg_miter);
+
+ local_irq_restore(flags);
+}
+
+static void sdhci_write_block_pio(struct sdhci_host *host)
+{
+ unsigned long flags;
+ size_t blksize, len, chunk;
+ u32 scratch;
+ u8 *buf;
+
+ DBG("PIO writing\n");
+
+ blksize = host->data->blksz;
+ chunk = 0;
+ scratch = 0;
+
+ local_irq_save(flags);
+
+ while (blksize) {
+ if (!sg_miter_next(&host->sg_miter))
+ BUG();
+
+ len = min(host->sg_miter.length, blksize);
+
+ blksize -= len;
+ host->sg_miter.consumed = len;
+
+ buf = host->sg_miter.addr;
+
+ while (len) {
+ scratch |= (u32)*buf << (chunk * 8);
+
+ buf++;
+ chunk++;
+ len--;
+
+ if ((chunk == 4) || ((len == 0) && (blksize == 0))) {
+ sdhci_writel(host, scratch, SDHCI_BUFFER);
+ chunk = 0;
+ scratch = 0;
+ }
+ }
+ }
+
+ sg_miter_stop(&host->sg_miter);
+
+ local_irq_restore(flags);
+}
+
+static void sdhci_transfer_pio(struct sdhci_host *host)
+{
+ u32 mask;
+
+ BUG_ON(!host->data);
+
+ if (host->blocks == 0)
+ return;
+
+ if (host->data->flags & MMC_DATA_READ)
+ mask = SDHCI_DATA_AVAILABLE;
+ else
+ mask = SDHCI_SPACE_AVAILABLE;
+
+ /*
+ * Some controllers (JMicron JMB38x) mess up the buffer bits
+ * for transfers < 4 bytes. As long as it is just one block,
+ * we can ignore the bits.
+ */
+ if ((host->quirks & SDHCI_QUIRK_BROKEN_SMALL_PIO) &&
+ (host->data->blocks == 1))
+ mask = ~0;
+
+ while (sdhci_readl(host, SDHCI_PRESENT_STATE) & mask) {
+ if (host->quirks & SDHCI_QUIRK_PIO_NEEDS_DELAY)
+ udelay(100);
+
+ if (host->data->flags & MMC_DATA_READ)
+ sdhci_read_block_pio(host);
+ else
+ sdhci_write_block_pio(host);
+
+ host->blocks--;
+ if (host->blocks == 0)
+ break;
+ }
+
+ DBG("PIO transfer complete.\n");
+}
+
+static char *sdhci_kmap_atomic(struct scatterlist *sg, unsigned long *flags)
+{
+ local_irq_save(*flags);
+ return kmap_atomic(sg_page(sg)) + sg->offset;
+}
+
+static void sdhci_kunmap_atomic(void *buffer, unsigned long *flags)
+{
+ kunmap_atomic(buffer);
+ local_irq_restore(*flags);
+}
+
+static void sdhci_adma_write_desc(struct sdhci_host *host, void *desc,
+ dma_addr_t addr, int len, unsigned cmd)
+{
+ struct sdhci_adma2_64_desc *dma_desc = desc;
+
+ /* 32-bit and 64-bit descriptors have these members in same position */
+ dma_desc->cmd = cpu_to_le16(cmd);
+ dma_desc->len = cpu_to_le16(len);
+ dma_desc->addr_lo = cpu_to_le32((u32)addr);
+
+ if (host->flags & SDHCI_USE_64_BIT_DMA)
+ dma_desc->addr_hi = cpu_to_le32((u64)addr >> 32);
+}
+
+static void sdhci_adma_mark_end(void *desc)
+{
+ struct sdhci_adma2_64_desc *dma_desc = desc;
+
+ /* 32-bit and 64-bit descriptors have 'cmd' in same position */
+ dma_desc->cmd |= cpu_to_le16(ADMA2_END);
+}
+
+static int sdhci_adma_table_pre(struct sdhci_host *host,
+ struct mmc_data *data)
+{
+ int direction;
+
+ void *desc;
+ void *align;
+ dma_addr_t addr;
+ dma_addr_t align_addr;
+ int len, offset;
+
+ struct scatterlist *sg;
+ int i;
+ char *buffer;
+ unsigned long flags;
+
+ /*
+ * The spec does not specify endianness of descriptor table.
+ * We currently guess that it is LE.
+ */
+
+ if (data->flags & MMC_DATA_READ)
+ direction = DMA_FROM_DEVICE;
+ else
+ direction = DMA_TO_DEVICE;
+
+ host->align_addr = dma_map_single(mmc_dev(host->mmc),
+ host->align_buffer, host->align_buffer_sz, direction);
+ if (dma_mapping_error(mmc_dev(host->mmc), host->align_addr))
+ goto fail;
+ BUG_ON(host->align_addr & host->align_mask);
+
+ host->sg_count = sdhci_pre_dma_transfer(host, data, NULL);
+ if (host->sg_count < 0)
+ goto unmap_align;
+
+ desc = host->adma_table;
+ align = host->align_buffer;
+
+ align_addr = host->align_addr;
+
+ for_each_sg(data->sg, sg, host->sg_count, i) {
+ addr = sg_dma_address(sg);
+ len = sg_dma_len(sg);
+
+ /*
+ * The SDHCI specification states that ADMA
+ * addresses must be 32-bit aligned. If they
+ * aren't, then we use a bounce buffer for
+ * the (up to three) bytes that screw up the
+ * alignment.
+ */
+ offset = (host->align_sz - (addr & host->align_mask)) &
+ host->align_mask;
+ if (offset) {
+ if (data->flags & MMC_DATA_WRITE) {
+ buffer = sdhci_kmap_atomic(sg, &flags);
+ memcpy(align, buffer, offset);
+ sdhci_kunmap_atomic(buffer, &flags);
+ }
+
+ /* tran, valid */
+ sdhci_adma_write_desc(host, desc, align_addr, offset,
+ ADMA2_TRAN_VALID);
+
+ BUG_ON(offset > 65536);
+
+ align += host->align_sz;
+ align_addr += host->align_sz;
+
+ desc += host->desc_sz;
+
+ addr += offset;
+ len -= offset;
+ }
+
+ BUG_ON(len > 65536);
+
+ /* tran, valid */
+ sdhci_adma_write_desc(host, desc, addr, len, ADMA2_TRAN_VALID);
+ desc += host->desc_sz;
+
+ /*
+ * If this triggers then we have a calculation bug
+ * somewhere. :/
+ */
+ WARN_ON((desc - host->adma_table) >= host->adma_table_sz);
+ }
+
+ if (host->quirks & SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC) {
+ /*
+ * Mark the last descriptor as the terminating descriptor
+ */
+ if (desc != host->adma_table) {
+ desc -= host->desc_sz;
+ sdhci_adma_mark_end(desc);
+ }
+ } else {
+ /*
+ * Add a terminating entry.
+ */
+
+ /* nop, end, valid */
+ sdhci_adma_write_desc(host, desc, 0, 0, ADMA2_NOP_END_VALID);
+ }
+
+ /*
+ * Resync align buffer as we might have changed it.
+ */
+ if (data->flags & MMC_DATA_WRITE) {
+ dma_sync_single_for_device(mmc_dev(host->mmc),
+ host->align_addr, host->align_buffer_sz, direction);
+ }
+
+ return 0;
+
+unmap_align:
+ dma_unmap_single(mmc_dev(host->mmc), host->align_addr,
+ host->align_buffer_sz, direction);
+fail:
+ return -EINVAL;
+}
+
+static void sdhci_adma_table_post(struct sdhci_host *host,
+ struct mmc_data *data)
+{
+ int direction;
+
+ struct scatterlist *sg;
+ int i, size;
+ void *align;
+ char *buffer;
+ unsigned long flags;
+ bool has_unaligned;
+
+ if (data->flags & MMC_DATA_READ)
+ direction = DMA_FROM_DEVICE;
+ else
+ direction = DMA_TO_DEVICE;
+
+ dma_unmap_single(mmc_dev(host->mmc), host->align_addr,
+ host->align_buffer_sz, direction);
+
+ /* Do a quick scan of the SG list for any unaligned mappings */
+ has_unaligned = false;
+ for_each_sg(data->sg, sg, host->sg_count, i)
+ if (sg_dma_address(sg) & host->align_mask) {
+ has_unaligned = true;
+ break;
+ }
+
+ if (has_unaligned && data->flags & MMC_DATA_READ) {
+ dma_sync_sg_for_cpu(mmc_dev(host->mmc), data->sg,
+ data->sg_len, direction);
+
+ align = host->align_buffer;
+
+ for_each_sg(data->sg, sg, host->sg_count, i) {
+ if (sg_dma_address(sg) & host->align_mask) {
+ size = host->align_sz -
+ (sg_dma_address(sg) & host->align_mask);
+
+ buffer = sdhci_kmap_atomic(sg, &flags);
+ memcpy(buffer, align, size);
+ sdhci_kunmap_atomic(buffer, &flags);
+
+ align += host->align_sz;
+ }
+ }
+ }
+
+ if (!data->host_cookie)
+ dma_unmap_sg(mmc_dev(host->mmc), data->sg,
+ data->sg_len, direction);
+}
+
+static u8 sdhci_calc_timeout(struct sdhci_host *host, struct mmc_command *cmd)
+{
+ u8 count;
+ struct mmc_data *data = cmd->data;
+ unsigned target_timeout, current_timeout;
+
+ /*
+ * If the host controller provides us with an incorrect timeout
+ * value, just skip the check and use 0xE. The hardware may take
+ * longer to time out, but that's much better than having a too-short
+ * timeout value.
+ */
+ if (host->quirks & SDHCI_QUIRK_BROKEN_TIMEOUT_VAL)
+ return 0xE;
+
+ /* Unspecified timeout, assume max */
+ if (!data && !cmd->busy_timeout)
+ return 0xE;
+
+ /* timeout in us */
+ if (!data)
+ target_timeout = cmd->busy_timeout * 1000;
+ else {
+ target_timeout = data->timeout_ns / 1000;
+ if (host->clock)
+ target_timeout += data->timeout_clks / host->clock;
+ }
+
+ /*
+ * Figure out needed cycles.
+ * We do this in steps in order to fit inside a 32 bit int.
+ * The first step is the minimum timeout, which will have a
+ * minimum resolution of 6 bits:
+ * (1) 2^13*1000 > 2^22,
+ * (2) host->timeout_clk < 2^16
+ * =>
+ * (1) / (2) > 2^6
+ */
+ count = 0;
+ current_timeout = (1 << 13) * 1000 / host->timeout_clk;
+ while (current_timeout < target_timeout) {
+ count++;
+ current_timeout <<= 1;
+ if (count >= 0xF)
+ break;
+ }
+
+ if (count >= 0xF) {
+ DBG("%s: Too large timeout 0x%x requested for CMD%d!\n",
+ mmc_hostname(host->mmc), count, cmd->opcode);
+ count = 0xE;
+ }
+
+ return count;
+}
+
+static void sdhci_set_transfer_irqs(struct sdhci_host *host)
+{
+ u32 pio_irqs = SDHCI_INT_DATA_AVAIL | SDHCI_INT_SPACE_AVAIL;
+ u32 dma_irqs = SDHCI_INT_DMA_END | SDHCI_INT_ADMA_ERROR;
+
+ if (host->flags & SDHCI_REQ_USE_DMA)
+ host->ier = (host->ier & ~pio_irqs) | dma_irqs;
+ else
+ host->ier = (host->ier & ~dma_irqs) | pio_irqs;
+
+ sdhci_writel(host, host->ier, SDHCI_INT_ENABLE);
+ sdhci_writel(host, host->ier, SDHCI_SIGNAL_ENABLE);
+}
+
+static void sdhci_set_timeout(struct sdhci_host *host, struct mmc_command *cmd)
+{
+ u8 count;
+
+ if (host->ops->set_timeout) {
+ host->ops->set_timeout(host, cmd);
+ } else {
+ count = sdhci_calc_timeout(host, cmd);
+ sdhci_writeb(host, count, SDHCI_TIMEOUT_CONTROL);
+ }
+}
+
+static void sdhci_prepare_data(struct sdhci_host *host, struct mmc_command *cmd)
+{
+ u8 ctrl;
+ struct mmc_data *data = cmd->data;
+ int ret;
+
+ WARN_ON(host->data);
+
+ if (data || (cmd->flags & MMC_RSP_BUSY))
+ sdhci_set_timeout(host, cmd);
+
+ if (!data)
+ return;
+
+ /* Sanity checks */
+ BUG_ON(data->blksz * data->blocks > 524288);
+ BUG_ON(data->blksz > host->mmc->max_blk_size);
+ BUG_ON(data->blocks > 65535);
+
+ host->data = data;
+ host->data_early = 0;
+ host->data->bytes_xfered = 0;
+
+ if (host->flags & (SDHCI_USE_SDMA | SDHCI_USE_ADMA))
+ host->flags |= SDHCI_REQ_USE_DMA;
+
+ /*
+ * FIXME: This doesn't account for merging when mapping the
+ * scatterlist.
+ */
+ if (host->flags & SDHCI_REQ_USE_DMA) {
+ int broken, i;
+ struct scatterlist *sg;
+
+ broken = 0;
+ if (host->flags & SDHCI_USE_ADMA) {
+ if (host->quirks & SDHCI_QUIRK_32BIT_ADMA_SIZE)
+ broken = 1;
+ } else {
+ if (host->quirks & SDHCI_QUIRK_32BIT_DMA_SIZE)
+ broken = 1;
+ }
+
+ if (unlikely(broken)) {
+ for_each_sg(data->sg, sg, data->sg_len, i) {
+ if (sg->length & 0x3) {
+ DBG("Reverting to PIO because of "
+ "transfer size (%d)\n",
+ sg->length);
+ host->flags &= ~SDHCI_REQ_USE_DMA;
+ break;
+ }
+ }
+ }
+ }
+
+ /*
+ * The assumption here being that alignment is the same after
+ * translation to device address space.
+ */
+ if (host->flags & SDHCI_REQ_USE_DMA) {
+ int broken, i;
+ struct scatterlist *sg;
+
+ broken = 0;
+ if (host->flags & SDHCI_USE_ADMA) {
+ /*
+ * As we use 3 byte chunks to work around
+ * alignment problems, we need to check this
+ * quirk.
+ */
+ if (host->quirks & SDHCI_QUIRK_32BIT_ADMA_SIZE)
+ broken = 1;
+ } else {
+ if (host->quirks & SDHCI_QUIRK_32BIT_DMA_ADDR)
+ broken = 1;
+ }
+
+ if (unlikely(broken)) {
+ for_each_sg(data->sg, sg, data->sg_len, i) {
+ if (sg->offset & 0x3) {
+ DBG("Reverting to PIO because of "
+ "bad alignment\n");
+ host->flags &= ~SDHCI_REQ_USE_DMA;
+ break;
+ }
+ }
+ }
+ }
+
+ if (host->flags & SDHCI_REQ_USE_DMA) {
+ if (host->flags & SDHCI_USE_ADMA) {
+ ret = sdhci_adma_table_pre(host, data);
+ if (ret) {
+ /*
+ * This only happens when someone fed
+ * us an invalid request.
+ */
+ WARN_ON(1);
+ host->flags &= ~SDHCI_REQ_USE_DMA;
+ } else {
+ sdhci_writel(host, host->adma_addr,
+ SDHCI_ADMA_ADDRESS);
+ if (host->flags & SDHCI_USE_64_BIT_DMA)
+ sdhci_writel(host,
+ (u64)host->adma_addr >> 32,
+ SDHCI_ADMA_ADDRESS_HI);
+ }
+ } else {
+ int sg_cnt;
+
+ sg_cnt = sdhci_pre_dma_transfer(host, data, NULL);
+ if (sg_cnt <= 0) {
+ /*
+ * This only happens when someone fed
+ * us an invalid request.
+ */
+ WARN_ON(1);
+ host->flags &= ~SDHCI_REQ_USE_DMA;
+ } else {
+ WARN_ON(sg_cnt != 1);
+ sdhci_writel(host, sg_dma_address(data->sg),
+ SDHCI_DMA_ADDRESS);
+ }
+ }
+ }
+
+ /*
+ * Always adjust the DMA selection as some controllers
+ * (e.g. JMicron) can't do PIO properly when the selection
+ * is ADMA.
+ */
+ if (host->version >= SDHCI_SPEC_200) {
+ ctrl = sdhci_readb(host, SDHCI_HOST_CONTROL);
+ ctrl &= ~SDHCI_CTRL_DMA_MASK;
+ if ((host->flags & SDHCI_REQ_USE_DMA) &&
+ (host->flags & SDHCI_USE_ADMA)) {
+ if (host->flags & SDHCI_USE_64_BIT_DMA)
+ ctrl |= SDHCI_CTRL_ADMA64;
+ else
+ ctrl |= SDHCI_CTRL_ADMA32;
+ } else {
+ ctrl |= SDHCI_CTRL_SDMA;
+ }
+ sdhci_writeb(host, ctrl, SDHCI_HOST_CONTROL);
+ }
+
+ if (!(host->flags & SDHCI_REQ_USE_DMA)) {
+ int flags;
+
+ flags = SG_MITER_ATOMIC;
+ if (host->data->flags & MMC_DATA_READ)
+ flags |= SG_MITER_TO_SG;
+ else
+ flags |= SG_MITER_FROM_SG;
+ sg_miter_start(&host->sg_miter, data->sg, data->sg_len, flags);
+ host->blocks = data->blocks;
+ }
+
+ sdhci_set_transfer_irqs(host);
+
+ /* Set the DMA boundary value and block size */
+ sdhci_writew(host, SDHCI_MAKE_BLKSZ(SDHCI_DEFAULT_BOUNDARY_ARG,
+ data->blksz), SDHCI_BLOCK_SIZE);
+ sdhci_writew(host, data->blocks, SDHCI_BLOCK_COUNT);
+}
+
+static void sdhci_set_transfer_mode(struct sdhci_host *host,
+ struct mmc_command *cmd)
+{
+ u16 mode = 0;
+ struct mmc_data *data = cmd->data;
+
+ if (data == NULL) {
+ if (host->quirks2 &
+ SDHCI_QUIRK2_CLEAR_TRANSFERMODE_REG_BEFORE_CMD) {
+ sdhci_writew(host, 0x0, SDHCI_TRANSFER_MODE);
+ } else {
+ /* clear Auto CMD settings for no data CMDs */
+ mode = sdhci_readw(host, SDHCI_TRANSFER_MODE);
+ sdhci_writew(host, mode & ~(SDHCI_TRNS_AUTO_CMD12 |
+ SDHCI_TRNS_AUTO_CMD23), SDHCI_TRANSFER_MODE);
+ }
+ return;
+ }
+
+ WARN_ON(!host->data);
+
+ if (!(host->quirks2 & SDHCI_QUIRK2_SUPPORT_SINGLE))
+ mode = SDHCI_TRNS_BLK_CNT_EN;
+
+ if (mmc_op_multi(cmd->opcode) || data->blocks > 1) {
+ mode = SDHCI_TRNS_BLK_CNT_EN | SDHCI_TRNS_MULTI;
+ /*
+ * If we are sending CMD23, CMD12 never gets sent
+ * on successful completion (so no Auto-CMD12).
+ */
+ if (!host->mrq->sbc && (host->flags & SDHCI_AUTO_CMD12) &&
+ (cmd->opcode != SD_IO_RW_EXTENDED))
+ mode |= SDHCI_TRNS_AUTO_CMD12;
+ else if (host->mrq->sbc && (host->flags & SDHCI_AUTO_CMD23)) {
+ mode |= SDHCI_TRNS_AUTO_CMD23;
+ sdhci_writel(host, host->mrq->sbc->arg, SDHCI_ARGUMENT2);
+ }
+ }
+
+ if (data->flags & MMC_DATA_READ)
+ mode |= SDHCI_TRNS_READ;
+ if (host->flags & SDHCI_REQ_USE_DMA)
+ mode |= SDHCI_TRNS_DMA;
+
+ sdhci_writew(host, mode, SDHCI_TRANSFER_MODE);
+}
+
+static void sdhci_finish_data(struct sdhci_host *host)
+{
+ struct mmc_data *data;
+
+ BUG_ON(!host->data);
+
+ data = host->data;
+ host->data = NULL;
+
+ if (host->flags & SDHCI_REQ_USE_DMA) {
+ if (host->flags & SDHCI_USE_ADMA)
+ sdhci_adma_table_post(host, data);
+ else {
+ if (!data->host_cookie)
+ dma_unmap_sg(mmc_dev(host->mmc),
+ data->sg, data->sg_len,
+ (data->flags & MMC_DATA_READ) ?
+ DMA_FROM_DEVICE : DMA_TO_DEVICE);
+ }
+ }
+
+ /*
+ * The specification states that the block count register must
+ * be updated, but it does not specify at what point in the
+ * data flow. That makes the register entirely useless to read
+ * back so we have to assume that nothing made it to the card
+ * in the event of an error.
+ */
+ if (data->error)
+ data->bytes_xfered = 0;
+ else
+ data->bytes_xfered = data->blksz * data->blocks;
+
+ /*
+ * Need to send CMD12 if -
+ * a) open-ended multiblock transfer (no CMD23)
+ * b) error in multiblock transfer
+ */
+ if (data->stop &&
+ (data->error ||
+ !host->mrq->sbc)) {
+
+ /*
+ * The controller needs a reset of internal state machines
+ * upon error conditions.
+ */
+ if (data->error) {
+ sdhci_do_reset(host, SDHCI_RESET_CMD);
+ sdhci_do_reset(host, SDHCI_RESET_DATA);
+ }
+
+ sdhci_send_command(host, data->stop);
+ } else
+ tasklet_schedule(&host->finish_tasklet);
+}
+
+void sdhci_send_command(struct sdhci_host *host, struct mmc_command *cmd)
+{
+ int flags;
+ u32 mask;
+ unsigned long timeout;
+
+ WARN_ON(host->cmd);
+
+ /* Wait max 10 ms */
+ timeout = 10;
+
+ mask = SDHCI_CMD_INHIBIT;
+ if ((cmd->data != NULL) || (cmd->flags & MMC_RSP_BUSY))
+ mask |= SDHCI_DATA_INHIBIT;
+
+ /* We shouldn't wait for data inihibit for stop commands, even
+ though they might use busy signaling */
+ if (host->mrq->data && (cmd == host->mrq->data->stop))
+ mask &= ~SDHCI_DATA_INHIBIT;
+
+ while (sdhci_readl(host, SDHCI_PRESENT_STATE) & mask) {
+ if (timeout == 0) {
+ pr_err("%s: Controller never released "
+ "inhibit bit(s).\n", mmc_hostname(host->mmc));
+ sdhci_dumpregs(host);
+ cmd->error = -EIO;
+ tasklet_schedule(&host->finish_tasklet);
+ return;
+ }
+ timeout--;
+ mdelay(1);
+ }
+
+ timeout = jiffies;
+ if (!cmd->data && cmd->busy_timeout > 9000)
+ timeout += DIV_ROUND_UP(cmd->busy_timeout, 1000) * HZ + HZ;
+ else
+ timeout += 10 * HZ;
+ mod_timer(&host->timer, timeout);
+
+ host->cmd = cmd;
+ host->busy_handle = 0;
+
+ sdhci_prepare_data(host, cmd);
+
+ sdhci_writel(host, cmd->arg, SDHCI_ARGUMENT);
+
+ sdhci_set_transfer_mode(host, cmd);
+
+ if ((cmd->flags & MMC_RSP_136) && (cmd->flags & MMC_RSP_BUSY)) {
+ pr_err("%s: Unsupported response type!\n",
+ mmc_hostname(host->mmc));
+ cmd->error = -EINVAL;
+ tasklet_schedule(&host->finish_tasklet);
+ return;
+ }
+
+ if (!(cmd->flags & MMC_RSP_PRESENT))
+ flags = SDHCI_CMD_RESP_NONE;
+ else if (cmd->flags & MMC_RSP_136)
+ flags = SDHCI_CMD_RESP_LONG;
+ else if (cmd->flags & MMC_RSP_BUSY)
+ flags = SDHCI_CMD_RESP_SHORT_BUSY;
+ else
+ flags = SDHCI_CMD_RESP_SHORT;
+
+ if (cmd->flags & MMC_RSP_CRC)
+ flags |= SDHCI_CMD_CRC;
+ if (cmd->flags & MMC_RSP_OPCODE)
+ flags |= SDHCI_CMD_INDEX;
+
+ /* CMD19 is special in that the Data Present Select should be set */
+ if (cmd->data || cmd->opcode == MMC_SEND_TUNING_BLOCK ||
+ cmd->opcode == MMC_SEND_TUNING_BLOCK_HS200)
+ flags |= SDHCI_CMD_DATA;
+
+ sdhci_writew(host, SDHCI_MAKE_CMD(cmd->opcode, flags), SDHCI_COMMAND);
+}
+EXPORT_SYMBOL_GPL(sdhci_send_command);
+
+static void sdhci_finish_command(struct sdhci_host *host)
+{
+ int i;
+
+ BUG_ON(host->cmd == NULL);
+
+ if (host->cmd->flags & MMC_RSP_PRESENT) {
+ if (host->cmd->flags & MMC_RSP_136) {
+ /* CRC is stripped so we need to do some shifting. */
+ for (i = 0;i < 4;i++) {
+ host->cmd->resp[i] = sdhci_readl(host,
+ SDHCI_RESPONSE + (3-i)*4) << 8;
+ if (i != 3)
+ host->cmd->resp[i] |=
+ sdhci_readb(host,
+ SDHCI_RESPONSE + (3-i)*4-1);
+ }
+ } else {
+ host->cmd->resp[0] = sdhci_readl(host, SDHCI_RESPONSE);
+ }
+ }
+
+ host->cmd->error = 0;
+
+ /* Finished CMD23, now send actual command. */
+ if (host->cmd == host->mrq->sbc) {
+ host->cmd = NULL;
+ sdhci_send_command(host, host->mrq->cmd);
+ } else {
+
+ /* Processed actual command. */
+ if (host->data && host->data_early)
+ sdhci_finish_data(host);
+
+ if (!host->cmd->data)
+ tasklet_schedule(&host->finish_tasklet);
+
+ host->cmd = NULL;
+ }
+}
+
+static u16 sdhci_get_preset_value(struct sdhci_host *host)
+{
+ u16 preset = 0;
+
+ switch (host->timing) {
+ case MMC_TIMING_UHS_SDR12:
+ preset = sdhci_readw(host, SDHCI_PRESET_FOR_SDR12);
+ break;
+ case MMC_TIMING_UHS_SDR25:
+ preset = sdhci_readw(host, SDHCI_PRESET_FOR_SDR25);
+ break;
+ case MMC_TIMING_UHS_SDR50:
+ preset = sdhci_readw(host, SDHCI_PRESET_FOR_SDR50);
+ break;
+ case MMC_TIMING_UHS_SDR104:
+ case MMC_TIMING_MMC_HS200:
+ preset = sdhci_readw(host, SDHCI_PRESET_FOR_SDR104);
+ break;
+ case MMC_TIMING_UHS_DDR50:
+ preset = sdhci_readw(host, SDHCI_PRESET_FOR_DDR50);
+ break;
+ case MMC_TIMING_MMC_HS400:
+ preset = sdhci_readw(host, SDHCI_PRESET_FOR_HS400);
+ break;
+ default:
+ pr_warn("%s: Invalid UHS-I mode selected\n",
+ mmc_hostname(host->mmc));
+ preset = sdhci_readw(host, SDHCI_PRESET_FOR_SDR12);
+ break;
+ }
+ return preset;
+}
+
+void sdhci_set_clock(struct sdhci_host *host, unsigned int clock)
+{
+ int div = 0; /* Initialized for compiler warning */
+ int real_div = div, clk_mul = 1;
+ u16 clk = 0;
+ unsigned long timeout;
+
+ host->mmc->actual_clock = 0;
+
+ sdhci_writew(host, 0, SDHCI_CLOCK_CONTROL);
+
+ if (clock == 0)
+ return;
+
+ if (host->version >= SDHCI_SPEC_300) {
+ if (host->preset_enabled) {
+ u16 pre_val;
+
+ clk = sdhci_readw(host, SDHCI_CLOCK_CONTROL);
+ pre_val = sdhci_get_preset_value(host);
+ div = (pre_val & SDHCI_PRESET_SDCLK_FREQ_MASK)
+ >> SDHCI_PRESET_SDCLK_FREQ_SHIFT;
+ if (host->clk_mul &&
+ (pre_val & SDHCI_PRESET_CLKGEN_SEL_MASK)) {
+ clk = SDHCI_PROG_CLOCK_MODE;
+ real_div = div + 1;
+ clk_mul = host->clk_mul;
+ } else {
+ real_div = max_t(int, 1, div << 1);
+ }
+ goto clock_set;
+ }
+
+ /*
+ * Check if the Host Controller supports Programmable Clock
+ * Mode.
+ */
+ if (host->clk_mul) {
+ for (div = 1; div <= 1024; div++) {
+ if ((host->max_clk * host->clk_mul / div)
+ <= clock)
+ break;
+ }
+ /*
+ * Set Programmable Clock Mode in the Clock
+ * Control register.
+ */
+ clk = SDHCI_PROG_CLOCK_MODE;
+ real_div = div;
+ clk_mul = host->clk_mul;
+ div--;
+ } else {
+ /* Version 3.00 divisors must be a multiple of 2. */
+ if (host->max_clk <= clock)
+ div = 1;
+ else {
+ for (div = 2; div < SDHCI_MAX_DIV_SPEC_300;
+ div += 2) {
+ if ((host->max_clk / div) <= clock)
+ break;
+ }
+ }
+ real_div = div;
+ div >>= 1;
+ }
+ } else {
+ /* Version 2.00 divisors must be a power of 2. */
+ for (div = 1; div < SDHCI_MAX_DIV_SPEC_200; div *= 2) {
+ if ((host->max_clk / div) <= clock)
+ break;
+ }
+ real_div = div;
+ div >>= 1;
+ }
+
+clock_set:
+ if (real_div)
+ host->mmc->actual_clock = (host->max_clk * clk_mul) / real_div;
+ clk |= (div & SDHCI_DIV_MASK) << SDHCI_DIVIDER_SHIFT;
+ clk |= ((div & SDHCI_DIV_HI_MASK) >> SDHCI_DIV_MASK_LEN)
+ << SDHCI_DIVIDER_HI_SHIFT;
+ clk |= SDHCI_CLOCK_INT_EN;
+ sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL);
+
+ /* Wait max 20 ms */
+ timeout = 20;
+ while (!((clk = sdhci_readw(host, SDHCI_CLOCK_CONTROL))
+ & SDHCI_CLOCK_INT_STABLE)) {
+ if (timeout == 0) {
+ pr_err("%s: Internal clock never "
+ "stabilised.\n", mmc_hostname(host->mmc));
+ sdhci_dumpregs(host);
+ return;
+ }
+ timeout--;
+ mdelay(1);
+ }
+
+ clk |= SDHCI_CLOCK_CARD_EN;
+ sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL);
+}
+EXPORT_SYMBOL_GPL(sdhci_set_clock);
+
+static void sdhci_set_power(struct sdhci_host *host, unsigned char mode,
+ unsigned short vdd)
+{
+ struct mmc_host *mmc = host->mmc;
+ u8 pwr = 0;
+
+ if (!IS_ERR(mmc->supply.vmmc)) {
+ spin_unlock_irq(&host->lock);
+ mmc_regulator_set_ocr(mmc, mmc->supply.vmmc, vdd);
+ spin_lock_irq(&host->lock);
+
+ if (mode != MMC_POWER_OFF)
+ sdhci_writeb(host, SDHCI_POWER_ON, SDHCI_POWER_CONTROL);
+ else
+ sdhci_writeb(host, 0, SDHCI_POWER_CONTROL);
+
+ return;
+ }
+
+ if (mode != MMC_POWER_OFF) {
+ switch (1 << vdd) {
+ case MMC_VDD_165_195:
+ pwr = SDHCI_POWER_180;
+ break;
+ case MMC_VDD_29_30:
+ case MMC_VDD_30_31:
+ pwr = SDHCI_POWER_300;
+ break;
+ case MMC_VDD_32_33:
+ case MMC_VDD_33_34:
+ pwr = SDHCI_POWER_330;
+ break;
+ default:
+ BUG();
+ }
+ }
+
+ if (host->pwr == pwr)
+ return;
+
+ host->pwr = pwr;
+
+ if (pwr == 0) {
+ sdhci_writeb(host, 0, SDHCI_POWER_CONTROL);
+ if (host->quirks2 & SDHCI_QUIRK2_CARD_ON_NEEDS_BUS_ON)
+ sdhci_runtime_pm_bus_off(host);
+ vdd = 0;
+ } else {
+ /*
+ * Spec says that we should clear the power reg before setting
+ * a new value. Some controllers don't seem to like this though.
+ */
+ if (!(host->quirks & SDHCI_QUIRK_SINGLE_POWER_WRITE))
+ sdhci_writeb(host, 0, SDHCI_POWER_CONTROL);
+
+ /*
+ * At least the Marvell CaFe chip gets confused if we set the
+ * voltage and set turn on power at the same time, so set the
+ * voltage first.
+ */
+ if (host->quirks & SDHCI_QUIRK_NO_SIMULT_VDD_AND_POWER)
+ sdhci_writeb(host, pwr, SDHCI_POWER_CONTROL);
+
+ pwr |= SDHCI_POWER_ON;
+
+ sdhci_writeb(host, pwr, SDHCI_POWER_CONTROL);
+
+ if (host->quirks2 & SDHCI_QUIRK2_CARD_ON_NEEDS_BUS_ON)
+ sdhci_runtime_pm_bus_on(host);
+
+ /*
+ * Some controllers need an extra 10ms delay of 10ms before
+ * they can apply clock after applying power
+ */
+ if (host->quirks & SDHCI_QUIRK_DELAY_AFTER_POWER)
+ mdelay(10);
+ }
+}
+
+/*****************************************************************************\
+ * *
+ * MMC callbacks *
+ * *
+\*****************************************************************************/
+
+static void sdhci_request(struct mmc_host *mmc, struct mmc_request *mrq)
+{
+ struct sdhci_host *host;
+ int present;
+ unsigned long flags;
+ u32 tuning_opcode;
+
+ host = mmc_priv(mmc);
+
+ sdhci_runtime_pm_get(host);
+
+ /* Firstly check card presence */
+ present = sdhci_do_get_cd(host);
+
+ spin_lock_irqsave(&host->lock, flags);
+
+ WARN_ON(host->mrq != NULL);
+
+#ifndef SDHCI_USE_LEDS_CLASS
+ sdhci_activate_led(host);
+#endif
+
+ /*
+ * Ensure we don't send the STOP for non-SET_BLOCK_COUNTED
+ * requests if Auto-CMD12 is enabled.
+ */
+ if (!mrq->sbc && (host->flags & SDHCI_AUTO_CMD12)) {
+ if (mrq->stop) {
+ mrq->data->stop = NULL;
+ mrq->stop = NULL;
+ }
+ }
+
+ host->mrq = mrq;
+
+ if (!present || host->flags & SDHCI_DEVICE_DEAD) {
+ host->mrq->cmd->error = -ENOMEDIUM;
+ tasklet_schedule(&host->finish_tasklet);
+ } else {
+ u32 present_state;
+
+ present_state = sdhci_readl(host, SDHCI_PRESENT_STATE);
+ /*
+ * Check if the re-tuning timer has already expired and there
+ * is no on-going data transfer and DAT0 is not busy. If so,
+ * we need to execute tuning procedure before sending command.
+ */
+ if ((host->flags & SDHCI_NEEDS_RETUNING) &&
+ !(present_state & (SDHCI_DOING_WRITE | SDHCI_DOING_READ)) &&
+ (present_state & SDHCI_DATA_0_LVL_MASK)) {
+ if (mmc->card) {
+ /* eMMC uses cmd21 but sd and sdio use cmd19 */
+ tuning_opcode =
+ mmc->card->type == MMC_TYPE_MMC ?
+ MMC_SEND_TUNING_BLOCK_HS200 :
+ MMC_SEND_TUNING_BLOCK;
+
+ /* Here we need to set the host->mrq to NULL,
+ * in case the pending finish_tasklet
+ * finishes it incorrectly.
+ */
+ host->mrq = NULL;
+
+ spin_unlock_irqrestore(&host->lock, flags);
+ sdhci_execute_tuning(mmc, tuning_opcode);
+ spin_lock_irqsave(&host->lock, flags);
+
+ /* Restore original mmc_request structure */
+ host->mrq = mrq;
+ }
+ }
+
+ if (mrq->sbc && !(host->flags & SDHCI_AUTO_CMD23))
+ sdhci_send_command(host, mrq->sbc);
+ else
+ sdhci_send_command(host, mrq->cmd);
+ }
+
+ mmiowb();
+ spin_unlock_irqrestore(&host->lock, flags);
+}
+
+void sdhci_set_bus_width(struct sdhci_host *host, int width)
+{
+ u8 ctrl;
+
+ ctrl = sdhci_readb(host, SDHCI_HOST_CONTROL);
+ if (width == MMC_BUS_WIDTH_8) {
+ ctrl &= ~SDHCI_CTRL_4BITBUS;
+ if (host->version >= SDHCI_SPEC_300)
+ ctrl |= SDHCI_CTRL_8BITBUS;
+ } else {
+ if (host->version >= SDHCI_SPEC_300)
+ ctrl &= ~SDHCI_CTRL_8BITBUS;
+ if (width == MMC_BUS_WIDTH_4)
+ ctrl |= SDHCI_CTRL_4BITBUS;
+ else
+ ctrl &= ~SDHCI_CTRL_4BITBUS;
+ }
+ sdhci_writeb(host, ctrl, SDHCI_HOST_CONTROL);
+}
+EXPORT_SYMBOL_GPL(sdhci_set_bus_width);
+
+void sdhci_set_uhs_signaling(struct sdhci_host *host, unsigned timing)
+{
+ u16 ctrl_2;
+
+ ctrl_2 = sdhci_readw(host, SDHCI_HOST_CONTROL2);
+ /* Select Bus Speed Mode for host */
+ ctrl_2 &= ~SDHCI_CTRL_UHS_MASK;
+ if ((timing == MMC_TIMING_MMC_HS200) ||
+ (timing == MMC_TIMING_UHS_SDR104))
+ ctrl_2 |= SDHCI_CTRL_UHS_SDR104;
+ else if (timing == MMC_TIMING_UHS_SDR12)
+ ctrl_2 |= SDHCI_CTRL_UHS_SDR12;
+ else if (timing == MMC_TIMING_UHS_SDR25)
+ ctrl_2 |= SDHCI_CTRL_UHS_SDR25;
+ else if (timing == MMC_TIMING_UHS_SDR50)
+ ctrl_2 |= SDHCI_CTRL_UHS_SDR50;
+ else if ((timing == MMC_TIMING_UHS_DDR50) ||
+ (timing == MMC_TIMING_MMC_DDR52))
+ ctrl_2 |= SDHCI_CTRL_UHS_DDR50;
+ else if (timing == MMC_TIMING_MMC_HS400)
+ ctrl_2 |= SDHCI_CTRL_HS400; /* Non-standard */
+ sdhci_writew(host, ctrl_2, SDHCI_HOST_CONTROL2);
+}
+EXPORT_SYMBOL_GPL(sdhci_set_uhs_signaling);
+
+static void sdhci_do_set_ios(struct sdhci_host *host, struct mmc_ios *ios)
+{
+ unsigned long flags;
+ u8 ctrl;
+ struct mmc_host *mmc = host->mmc;
+
+ spin_lock_irqsave(&host->lock, flags);
+
+ if (host->flags & SDHCI_DEVICE_DEAD) {
+ spin_unlock_irqrestore(&host->lock, flags);
+ if (!IS_ERR(mmc->supply.vmmc) &&
+ ios->power_mode == MMC_POWER_OFF)
+ mmc_regulator_set_ocr(mmc, mmc->supply.vmmc, 0);
+ return;
+ }
+
+ /*
+ * Reset the chip on each power off.
+ * Should clear out any weird states.
+ */
+ if (ios->power_mode == MMC_POWER_OFF) {
+ sdhci_writel(host, 0, SDHCI_SIGNAL_ENABLE);
+ sdhci_reinit(host);
+ }
+
+ if (host->version >= SDHCI_SPEC_300 &&
+ (ios->power_mode == MMC_POWER_UP) &&
+ !(host->quirks2 & SDHCI_QUIRK2_PRESET_VALUE_BROKEN))
+ sdhci_enable_preset_value(host, false);
+
+ if (!ios->clock || ios->clock != host->clock) {
+ host->ops->set_clock(host, ios->clock);
+ host->clock = ios->clock;
+
+ if (host->quirks & SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK &&
+ host->clock) {
+ host->timeout_clk = host->mmc->actual_clock ?
+ host->mmc->actual_clock / 1000 :
+ host->clock / 1000;
+ host->mmc->max_busy_timeout =
+ host->ops->get_max_timeout_count ?
+ host->ops->get_max_timeout_count(host) :
+ 1 << 27;
+ host->mmc->max_busy_timeout /= host->timeout_clk;
+ }
+ }
+
+ sdhci_set_power(host, ios->power_mode, ios->vdd);
+
+ if (host->ops->platform_send_init_74_clocks)
+ host->ops->platform_send_init_74_clocks(host, ios->power_mode);
+
+ host->ops->set_bus_width(host, ios->bus_width);
+
+ ctrl = sdhci_readb(host, SDHCI_HOST_CONTROL);
+
+ if ((ios->timing == MMC_TIMING_SD_HS ||
+ ios->timing == MMC_TIMING_MMC_HS)
+ && !(host->quirks & SDHCI_QUIRK_NO_HISPD_BIT))
+ ctrl |= SDHCI_CTRL_HISPD;
+ else
+ ctrl &= ~SDHCI_CTRL_HISPD;
+
+ if (host->version >= SDHCI_SPEC_300) {
+ u16 clk, ctrl_2;
+
+ /* In case of UHS-I modes, set High Speed Enable */
+ if ((ios->timing == MMC_TIMING_MMC_HS400) ||
+ (ios->timing == MMC_TIMING_MMC_HS200) ||
+ (ios->timing == MMC_TIMING_MMC_DDR52) ||
+ (ios->timing == MMC_TIMING_UHS_SDR50) ||
+ (ios->timing == MMC_TIMING_UHS_SDR104) ||
+ (ios->timing == MMC_TIMING_UHS_DDR50) ||
+ (ios->timing == MMC_TIMING_UHS_SDR25))
+ ctrl |= SDHCI_CTRL_HISPD;
+
+ if (!host->preset_enabled) {
+ sdhci_writeb(host, ctrl, SDHCI_HOST_CONTROL);
+ /*
+ * We only need to set Driver Strength if the
+ * preset value enable is not set.
+ */
+ ctrl_2 = sdhci_readw(host, SDHCI_HOST_CONTROL2);
+ ctrl_2 &= ~SDHCI_CTRL_DRV_TYPE_MASK;
+ if (ios->drv_type == MMC_SET_DRIVER_TYPE_A)
+ ctrl_2 |= SDHCI_CTRL_DRV_TYPE_A;
+ else if (ios->drv_type == MMC_SET_DRIVER_TYPE_C)
+ ctrl_2 |= SDHCI_CTRL_DRV_TYPE_C;
+
+ sdhci_writew(host, ctrl_2, SDHCI_HOST_CONTROL2);
+ } else {
+ /*
+ * According to SDHC Spec v3.00, if the Preset Value
+ * Enable in the Host Control 2 register is set, we
+ * need to reset SD Clock Enable before changing High
+ * Speed Enable to avoid generating clock gliches.
+ */
+
+ /* Reset SD Clock Enable */
+ clk = sdhci_readw(host, SDHCI_CLOCK_CONTROL);
+ clk &= ~SDHCI_CLOCK_CARD_EN;
+ sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL);
+
+ sdhci_writeb(host, ctrl, SDHCI_HOST_CONTROL);
+
+ /* Re-enable SD Clock */
+ host->ops->set_clock(host, host->clock);
+ }
+
+ /* Reset SD Clock Enable */
+ clk = sdhci_readw(host, SDHCI_CLOCK_CONTROL);
+ clk &= ~SDHCI_CLOCK_CARD_EN;
+ sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL);
+
+ host->ops->set_uhs_signaling(host, ios->timing);
+ host->timing = ios->timing;
+
+ if (!(host->quirks2 & SDHCI_QUIRK2_PRESET_VALUE_BROKEN) &&
+ ((ios->timing == MMC_TIMING_UHS_SDR12) ||
+ (ios->timing == MMC_TIMING_UHS_SDR25) ||
+ (ios->timing == MMC_TIMING_UHS_SDR50) ||
+ (ios->timing == MMC_TIMING_UHS_SDR104) ||
+ (ios->timing == MMC_TIMING_UHS_DDR50))) {
+ u16 preset;
+
+ sdhci_enable_preset_value(host, true);
+ preset = sdhci_get_preset_value(host);
+ ios->drv_type = (preset & SDHCI_PRESET_DRV_MASK)
+ >> SDHCI_PRESET_DRV_SHIFT;
+ }
+
+ /* Re-enable SD Clock */
+ host->ops->set_clock(host, host->clock);
+ } else
+ sdhci_writeb(host, ctrl, SDHCI_HOST_CONTROL);
+
+ /*
+ * Some (ENE) controllers go apeshit on some ios operation,
+ * signalling timeout and CRC errors even on CMD0. Resetting
+ * it on each ios seems to solve the problem.
+ */
+ if (host->quirks & SDHCI_QUIRK_RESET_CMD_DATA_ON_IOS)
+ sdhci_do_reset(host, SDHCI_RESET_CMD | SDHCI_RESET_DATA);
+
+ mmiowb();
+ spin_unlock_irqrestore(&host->lock, flags);
+}
+
+static void sdhci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
+{
+ struct sdhci_host *host = mmc_priv(mmc);
+
+ sdhci_runtime_pm_get(host);
+ sdhci_do_set_ios(host, ios);
+ sdhci_runtime_pm_put(host);
+}
+
+static int sdhci_do_get_cd(struct sdhci_host *host)
+{
+ int gpio_cd = mmc_gpio_get_cd(host->mmc);
+
+ if (host->flags & SDHCI_DEVICE_DEAD)
+ return 0;
+
+ /* If polling/nonremovable, assume that the card is always present. */
+ if ((host->quirks & SDHCI_QUIRK_BROKEN_CARD_DETECTION) ||
+ (host->mmc->caps & MMC_CAP_NONREMOVABLE))
+ return 1;
+
+ /* Try slot gpio detect */
+ if (!IS_ERR_VALUE(gpio_cd))
+ return !!gpio_cd;
+
+ /* Host native card detect */
+ return !!(sdhci_readl(host, SDHCI_PRESENT_STATE) & SDHCI_CARD_PRESENT);
+}
+
+static int sdhci_get_cd(struct mmc_host *mmc)
+{
+ struct sdhci_host *host = mmc_priv(mmc);
+ int ret;
+
+ sdhci_runtime_pm_get(host);
+ ret = sdhci_do_get_cd(host);
+ sdhci_runtime_pm_put(host);
+ return ret;
+}
+
+static int sdhci_check_ro(struct sdhci_host *host)
+{
+ unsigned long flags;
+ int is_readonly;
+
+ spin_lock_irqsave(&host->lock, flags);
+
+ if (host->flags & SDHCI_DEVICE_DEAD)
+ is_readonly = 0;
+ else if (host->ops->get_ro)
+ is_readonly = host->ops->get_ro(host);
+ else
+ is_readonly = !(sdhci_readl(host, SDHCI_PRESENT_STATE)
+ & SDHCI_WRITE_PROTECT);
+
+ spin_unlock_irqrestore(&host->lock, flags);
+
+ /* This quirk needs to be replaced by a callback-function later */
+ return host->quirks & SDHCI_QUIRK_INVERTED_WRITE_PROTECT ?
+ !is_readonly : is_readonly;
+}
+
+#define SAMPLE_COUNT 5
+
+static int sdhci_do_get_ro(struct sdhci_host *host)
+{
+ int i, ro_count;
+
+ if (!(host->quirks & SDHCI_QUIRK_UNSTABLE_RO_DETECT))
+ return sdhci_check_ro(host);
+
+ ro_count = 0;
+ for (i = 0; i < SAMPLE_COUNT; i++) {
+ if (sdhci_check_ro(host)) {
+ if (++ro_count > SAMPLE_COUNT / 2)
+ return 1;
+ }
+ msleep(30);
+ }
+ return 0;
+}
+
+static void sdhci_hw_reset(struct mmc_host *mmc)
+{
+ struct sdhci_host *host = mmc_priv(mmc);
+
+ if (host->ops && host->ops->hw_reset)
+ host->ops->hw_reset(host);
+}
+
+static int sdhci_get_ro(struct mmc_host *mmc)
+{
+ struct sdhci_host *host = mmc_priv(mmc);
+ int ret;
+
+ sdhci_runtime_pm_get(host);
+ ret = sdhci_do_get_ro(host);
+ sdhci_runtime_pm_put(host);
+ return ret;
+}
+
+static void sdhci_enable_sdio_irq_nolock(struct sdhci_host *host, int enable)
+{
+ if (!(host->flags & SDHCI_DEVICE_DEAD)) {
+ if (enable)
+ host->ier |= SDHCI_INT_CARD_INT;
+ else
+ host->ier &= ~SDHCI_INT_CARD_INT;
+
+ sdhci_writel(host, host->ier, SDHCI_INT_ENABLE);
+ sdhci_writel(host, host->ier, SDHCI_SIGNAL_ENABLE);
+ mmiowb();
+ }
+}
+
+static void sdhci_enable_sdio_irq(struct mmc_host *mmc, int enable)
+{
+ struct sdhci_host *host = mmc_priv(mmc);
+ unsigned long flags;
+
+ sdhci_runtime_pm_get(host);
+
+ spin_lock_irqsave(&host->lock, flags);
+ if (enable)
+ host->flags |= SDHCI_SDIO_IRQ_ENABLED;
+ else
+ host->flags &= ~SDHCI_SDIO_IRQ_ENABLED;
+
+ sdhci_enable_sdio_irq_nolock(host, enable);
+ spin_unlock_irqrestore(&host->lock, flags);
+
+ sdhci_runtime_pm_put(host);
+}
+
+static int sdhci_do_start_signal_voltage_switch(struct sdhci_host *host,
+ struct mmc_ios *ios)
+{
+ struct mmc_host *mmc = host->mmc;
+ u16 ctrl;
+ int ret;
+
+ /*
+ * Signal Voltage Switching is only applicable for Host Controllers
+ * v3.00 and above.
+ */
+ if (host->version < SDHCI_SPEC_300)
+ return 0;
+
+ ctrl = sdhci_readw(host, SDHCI_HOST_CONTROL2);
+
+ switch (ios->signal_voltage) {
+ case MMC_SIGNAL_VOLTAGE_330:
+ /* Set 1.8V Signal Enable in the Host Control2 register to 0 */
+ ctrl &= ~SDHCI_CTRL_VDD_180;
+ sdhci_writew(host, ctrl, SDHCI_HOST_CONTROL2);
+
+ if (!IS_ERR(mmc->supply.vqmmc)) {
+ ret = regulator_set_voltage(mmc->supply.vqmmc, 2700000,
+ 3600000);
+ if (ret) {
+ pr_warn("%s: Switching to 3.3V signalling voltage failed\n",
+ mmc_hostname(mmc));
+ return -EIO;
+ }
+ }
+ /* Wait for 5ms */
+ usleep_range(5000, 5500);
+
+ /* 3.3V regulator output should be stable within 5 ms */
+ ctrl = sdhci_readw(host, SDHCI_HOST_CONTROL2);
+ if (!(ctrl & SDHCI_CTRL_VDD_180))
+ return 0;
+
+ pr_warn("%s: 3.3V regulator output did not became stable\n",
+ mmc_hostname(mmc));
+
+ return -EAGAIN;
+ case MMC_SIGNAL_VOLTAGE_180:
+ if (!IS_ERR(mmc->supply.vqmmc)) {
+ ret = regulator_set_voltage(mmc->supply.vqmmc,
+ 1700000, 1950000);
+ if (ret) {
+ pr_warn("%s: Switching to 1.8V signalling voltage failed\n",
+ mmc_hostname(mmc));
+ return -EIO;
+ }
+ }
+
+ /*
+ * Enable 1.8V Signal Enable in the Host Control2
+ * register
+ */
+ ctrl |= SDHCI_CTRL_VDD_180;
+ sdhci_writew(host, ctrl, SDHCI_HOST_CONTROL2);
+
+ /* Some controller need to do more when switching */
+ if (host->ops->voltage_switch)
+ host->ops->voltage_switch(host);
+
+ /* 1.8V regulator output should be stable within 5 ms */
+ ctrl = sdhci_readw(host, SDHCI_HOST_CONTROL2);
+ if (ctrl & SDHCI_CTRL_VDD_180)
+ return 0;
+
+ pr_warn("%s: 1.8V regulator output did not became stable\n",
+ mmc_hostname(mmc));
+
+ return -EAGAIN;
+ case MMC_SIGNAL_VOLTAGE_120:
+ if (!IS_ERR(mmc->supply.vqmmc)) {
+ ret = regulator_set_voltage(mmc->supply.vqmmc, 1100000,
+ 1300000);
+ if (ret) {
+ pr_warn("%s: Switching to 1.2V signalling voltage failed\n",
+ mmc_hostname(mmc));
+ return -EIO;
+ }
+ }
+ return 0;
+ default:
+ /* No signal voltage switch required */
+ return 0;
+ }
+}
+
+static int sdhci_start_signal_voltage_switch(struct mmc_host *mmc,
+ struct mmc_ios *ios)
+{
+ struct sdhci_host *host = mmc_priv(mmc);
+ int err;
+
+ if (host->version < SDHCI_SPEC_300)
+ return 0;
+ sdhci_runtime_pm_get(host);
+ err = sdhci_do_start_signal_voltage_switch(host, ios);
+ sdhci_runtime_pm_put(host);
+ return err;
+}
+
+static int sdhci_card_busy(struct mmc_host *mmc)
+{
+ struct sdhci_host *host = mmc_priv(mmc);
+ u32 present_state;
+
+ sdhci_runtime_pm_get(host);
+ /* Check whether DAT[3:0] is 0000 */
+ present_state = sdhci_readl(host, SDHCI_PRESENT_STATE);
+ sdhci_runtime_pm_put(host);
+
+ return !(present_state & SDHCI_DATA_LVL_MASK);
+}
+
+static int sdhci_prepare_hs400_tuning(struct mmc_host *mmc, struct mmc_ios *ios)
+{
+ struct sdhci_host *host = mmc_priv(mmc);
+ unsigned long flags;
+
+ spin_lock_irqsave(&host->lock, flags);
+ host->flags |= SDHCI_HS400_TUNING;
+ spin_unlock_irqrestore(&host->lock, flags);
+
+ return 0;
+}
+
+static int sdhci_execute_tuning(struct mmc_host *mmc, u32 opcode)
+{
+ struct sdhci_host *host = mmc_priv(mmc);
+ u16 ctrl;
+ int tuning_loop_counter = MAX_TUNING_LOOP;
+ int err = 0;
+ unsigned long flags;
+ unsigned int tuning_count = 0;
+ bool hs400_tuning;
+
+ sdhci_runtime_pm_get(host);
+ spin_lock_irqsave(&host->lock, flags);
+
+ hs400_tuning = host->flags & SDHCI_HS400_TUNING;
+ host->flags &= ~SDHCI_HS400_TUNING;
+
+ if (host->tuning_mode == SDHCI_TUNING_MODE_1)
+ tuning_count = host->tuning_count;
+
+ /*
+ * The Host Controller needs tuning only in case of SDR104 mode
+ * and for SDR50 mode when Use Tuning for SDR50 is set in the
+ * Capabilities register.
+ * If the Host Controller supports the HS200 mode then the
+ * tuning function has to be executed.
+ */
+ switch (host->timing) {
+ /* HS400 tuning is done in HS200 mode */
+ case MMC_TIMING_MMC_HS400:
+ err = -EINVAL;
+ goto out_unlock;
+
+ case MMC_TIMING_MMC_HS200:
+ /*
+ * Periodic re-tuning for HS400 is not expected to be needed, so
+ * disable it here.
+ */
+ if (hs400_tuning)
+ tuning_count = 0;
+ break;
+
+ case MMC_TIMING_UHS_SDR104:
+ break;
+
+ case MMC_TIMING_UHS_SDR50:
+ if (host->flags & SDHCI_SDR50_NEEDS_TUNING ||
+ host->flags & SDHCI_SDR104_NEEDS_TUNING)
+ break;
+ /* FALLTHROUGH */
+
+ default:
+ goto out_unlock;
+ }
+
+ if (host->ops->platform_execute_tuning) {
+ spin_unlock_irqrestore(&host->lock, flags);
+ err = host->ops->platform_execute_tuning(host, opcode);
+ sdhci_runtime_pm_put(host);
+ return err;
+ }
+
+ ctrl = sdhci_readw(host, SDHCI_HOST_CONTROL2);
+ ctrl |= SDHCI_CTRL_EXEC_TUNING;
+ if (host->quirks2 & SDHCI_QUIRK2_TUNING_WORK_AROUND)
+ ctrl |= SDHCI_CTRL_TUNED_CLK;
+ sdhci_writew(host, ctrl, SDHCI_HOST_CONTROL2);
+
+ /*
+ * As per the Host Controller spec v3.00, tuning command
+ * generates Buffer Read Ready interrupt, so enable that.
+ *
+ * Note: The spec clearly says that when tuning sequence
+ * is being performed, the controller does not generate
+ * interrupts other than Buffer Read Ready interrupt. But
+ * to make sure we don't hit a controller bug, we _only_
+ * enable Buffer Read Ready interrupt here.
+ */
+ sdhci_writel(host, SDHCI_INT_DATA_AVAIL, SDHCI_INT_ENABLE);
+ sdhci_writel(host, SDHCI_INT_DATA_AVAIL, SDHCI_SIGNAL_ENABLE);
+
+ /*
+ * Issue CMD19 repeatedly till Execute Tuning is set to 0 or the number
+ * of loops reaches 40 times or a timeout of 150ms occurs.
+ */
+ do {
+ struct mmc_command cmd = {0};
+ struct mmc_request mrq = {NULL};
+
+ cmd.opcode = opcode;
+ cmd.arg = 0;
+ cmd.flags = MMC_RSP_R1 | MMC_CMD_ADTC;
+ cmd.retries = 0;
+ cmd.data = NULL;
+ cmd.error = 0;
+
+ if (tuning_loop_counter-- == 0)
+ break;
+
+ mrq.cmd = &cmd;
+ host->mrq = &mrq;
+
+ /*
+ * In response to CMD19, the card sends 64 bytes of tuning
+ * block to the Host Controller. So we set the block size
+ * to 64 here.
+ */
+ if (cmd.opcode == MMC_SEND_TUNING_BLOCK_HS200) {
+ if (mmc->ios.bus_width == MMC_BUS_WIDTH_8)
+ sdhci_writew(host, SDHCI_MAKE_BLKSZ(7, 128),
+ SDHCI_BLOCK_SIZE);
+ else if (mmc->ios.bus_width == MMC_BUS_WIDTH_4)
+ sdhci_writew(host, SDHCI_MAKE_BLKSZ(7, 64),
+ SDHCI_BLOCK_SIZE);
+ } else {
+ sdhci_writew(host, SDHCI_MAKE_BLKSZ(7, 64),
+ SDHCI_BLOCK_SIZE);
+ }
+
+ /*
+ * The tuning block is sent by the card to the host controller.
+ * So we set the TRNS_READ bit in the Transfer Mode register.
+ * This also takes care of setting DMA Enable and Multi Block
+ * Select in the same register to 0.
+ */
+ sdhci_writew(host, SDHCI_TRNS_READ, SDHCI_TRANSFER_MODE);
+
+ sdhci_send_command(host, &cmd);
+
+ host->cmd = NULL;
+ host->mrq = NULL;
+
+ spin_unlock_irqrestore(&host->lock, flags);
+ /* Wait for Buffer Read Ready interrupt */
+ wait_event_interruptible_timeout(host->buf_ready_int,
+ (host->tuning_done == 1),
+ msecs_to_jiffies(50));
+ spin_lock_irqsave(&host->lock, flags);
+
+ if (!host->tuning_done) {
+ pr_info(DRIVER_NAME ": Timeout waiting for "
+ "Buffer Read Ready interrupt during tuning "
+ "procedure, falling back to fixed sampling "
+ "clock\n");
+ ctrl = sdhci_readw(host, SDHCI_HOST_CONTROL2);
+ ctrl &= ~SDHCI_CTRL_TUNED_CLK;
+ ctrl &= ~SDHCI_CTRL_EXEC_TUNING;
+ sdhci_writew(host, ctrl, SDHCI_HOST_CONTROL2);
+
+ err = -EIO;
+ goto out;
+ }
+
+ host->tuning_done = 0;
+
+ ctrl = sdhci_readw(host, SDHCI_HOST_CONTROL2);
+
+ /* eMMC spec does not require a delay between tuning cycles */
+ if (opcode == MMC_SEND_TUNING_BLOCK)
+ mdelay(1);
+ } while (ctrl & SDHCI_CTRL_EXEC_TUNING);
+
+ /*
+ * The Host Driver has exhausted the maximum number of loops allowed,
+ * so use fixed sampling frequency.
+ */
+ if (tuning_loop_counter < 0) {
+ ctrl &= ~SDHCI_CTRL_TUNED_CLK;
+ sdhci_writew(host, ctrl, SDHCI_HOST_CONTROL2);
+ }
+ if (!(ctrl & SDHCI_CTRL_TUNED_CLK)) {
+ pr_info(DRIVER_NAME ": Tuning procedure"
+ " failed, falling back to fixed sampling"
+ " clock\n");
+ err = -EIO;
+ }
+
+out:
+ host->flags &= ~SDHCI_NEEDS_RETUNING;
+
+ if (tuning_count) {
+ host->flags |= SDHCI_USING_RETUNING_TIMER;
+ mod_timer(&host->tuning_timer, jiffies + tuning_count * HZ);
+ }
+
+ /*
+ * In case tuning fails, host controllers which support re-tuning can
+ * try tuning again at a later time, when the re-tuning timer expires.
+ * So for these controllers, we return 0. Since there might be other
+ * controllers who do not have this capability, we return error for
+ * them. SDHCI_USING_RETUNING_TIMER means the host is currently using
+ * a retuning timer to do the retuning for the card.
+ */
+ if (err && (host->flags & SDHCI_USING_RETUNING_TIMER))
+ err = 0;
+
+ sdhci_writel(host, host->ier, SDHCI_INT_ENABLE);
+ sdhci_writel(host, host->ier, SDHCI_SIGNAL_ENABLE);
+out_unlock:
+ spin_unlock_irqrestore(&host->lock, flags);
+ sdhci_runtime_pm_put(host);
+
+ return err;
+}
+
+
+static void sdhci_enable_preset_value(struct sdhci_host *host, bool enable)
+{
+ /* Host Controller v3.00 defines preset value registers */
+ if (host->version < SDHCI_SPEC_300)
+ return;
+
+ /*
+ * We only enable or disable Preset Value if they are not already
+ * enabled or disabled respectively. Otherwise, we bail out.
+ */
+ if (host->preset_enabled != enable) {
+ u16 ctrl = sdhci_readw(host, SDHCI_HOST_CONTROL2);
+
+ if (enable)
+ ctrl |= SDHCI_CTRL_PRESET_VAL_ENABLE;
+ else
+ ctrl &= ~SDHCI_CTRL_PRESET_VAL_ENABLE;
+
+ sdhci_writew(host, ctrl, SDHCI_HOST_CONTROL2);
+
+ if (enable)
+ host->flags |= SDHCI_PV_ENABLED;
+ else
+ host->flags &= ~SDHCI_PV_ENABLED;
+
+ host->preset_enabled = enable;
+ }
+}
+
+static void sdhci_post_req(struct mmc_host *mmc, struct mmc_request *mrq,
+ int err)
+{
+ struct sdhci_host *host = mmc_priv(mmc);
+ struct mmc_data *data = mrq->data;
+
+ if (host->flags & SDHCI_REQ_USE_DMA) {
+ if (data->host_cookie)
+ dma_unmap_sg(mmc_dev(host->mmc), data->sg, data->sg_len,
+ data->flags & MMC_DATA_WRITE ?
+ DMA_TO_DEVICE : DMA_FROM_DEVICE);
+ mrq->data->host_cookie = 0;
+ }
+}
+
+static int sdhci_pre_dma_transfer(struct sdhci_host *host,
+ struct mmc_data *data,
+ struct sdhci_host_next *next)
+{
+ int sg_count;
+
+ if (!next && data->host_cookie &&
+ data->host_cookie != host->next_data.cookie) {
+ pr_debug(DRIVER_NAME "[%s] invalid cookie: %d, next-cookie %d\n",
+ __func__, data->host_cookie, host->next_data.cookie);
+ data->host_cookie = 0;
+ }
+
+ /* Check if next job is already prepared */
+ if (next ||
+ (!next && data->host_cookie != host->next_data.cookie)) {
+ sg_count = dma_map_sg(mmc_dev(host->mmc), data->sg,
+ data->sg_len,
+ data->flags & MMC_DATA_WRITE ?
+ DMA_TO_DEVICE : DMA_FROM_DEVICE);
+
+ } else {
+ sg_count = host->next_data.sg_count;
+ host->next_data.sg_count = 0;
+ }
+
+
+ if (sg_count == 0)
+ return -EINVAL;
+
+ if (next) {
+ next->sg_count = sg_count;
+ data->host_cookie = ++next->cookie < 0 ? 1 : next->cookie;
+ } else
+ host->sg_count = sg_count;
+
+ return sg_count;
+}
+
+static void sdhci_pre_req(struct mmc_host *mmc, struct mmc_request *mrq,
+ bool is_first_req)
+{
+ struct sdhci_host *host = mmc_priv(mmc);
+
+ if (mrq->data->host_cookie) {
+ mrq->data->host_cookie = 0;
+ return;
+ }
+
+ if (host->flags & SDHCI_REQ_USE_DMA)
+ if (sdhci_pre_dma_transfer(host,
+ mrq->data,
+ &host->next_data) < 0)
+ mrq->data->host_cookie = 0;
+}
+
+static void sdhci_card_event(struct mmc_host *mmc)
+{
+ struct sdhci_host *host = mmc_priv(mmc);
+ unsigned long flags;
+ int present;
+
+ /* First check if client has provided their own card event */
+ if (host->ops->card_event)
+ host->ops->card_event(host);
+
+ present = sdhci_do_get_cd(host);
+
+ spin_lock_irqsave(&host->lock, flags);
+
+ /* Check host->mrq first in case we are runtime suspended */
+ if (host->mrq && !present) {
+ pr_err("%s: Card removed during transfer!\n",
+ mmc_hostname(host->mmc));
+ pr_err("%s: Resetting controller.\n",
+ mmc_hostname(host->mmc));
+
+ sdhci_do_reset(host, SDHCI_RESET_CMD);
+ sdhci_do_reset(host, SDHCI_RESET_DATA);
+
+ host->mrq->cmd->error = -ENOMEDIUM;
+ tasklet_schedule(&host->finish_tasklet);
+ }
+
+ spin_unlock_irqrestore(&host->lock, flags);
+}
+
+static const struct mmc_host_ops sdhci_ops = {
+ .request = sdhci_request,
+ .post_req = sdhci_post_req,
+ .pre_req = sdhci_pre_req,
+ .set_ios = sdhci_set_ios,
+ .get_cd = sdhci_get_cd,
+ .get_ro = sdhci_get_ro,
+ .hw_reset = sdhci_hw_reset,
+ .enable_sdio_irq = sdhci_enable_sdio_irq,
+ .start_signal_voltage_switch = sdhci_start_signal_voltage_switch,
+ .prepare_hs400_tuning = sdhci_prepare_hs400_tuning,
+ .execute_tuning = sdhci_execute_tuning,
+ .card_event = sdhci_card_event,
+ .card_busy = sdhci_card_busy,
+};
+
+/*****************************************************************************\
+ * *
+ * Tasklets *
+ * *
+\*****************************************************************************/
+
+static void sdhci_tasklet_finish(unsigned long param)
+{
+ struct sdhci_host *host;
+ unsigned long flags;
+ struct mmc_request *mrq;
+
+ host = (struct sdhci_host*)param;
+
+ spin_lock_irqsave(&host->lock, flags);
+
+ /*
+ * If this tasklet gets rescheduled while running, it will
+ * be run again afterwards but without any active request.
+ */
+ if (!host->mrq) {
+ spin_unlock_irqrestore(&host->lock, flags);
+ return;
+ }
+
+ del_timer(&host->timer);
+
+ mrq = host->mrq;
+
+ /*
+ * The controller needs a reset of internal state machines
+ * upon error conditions.
+ */
+ if (!(host->flags & SDHCI_DEVICE_DEAD) &&
+ ((mrq->cmd && mrq->cmd->error) ||
+ (mrq->sbc && mrq->sbc->error) ||
+ (mrq->data && ((mrq->data->error && !mrq->data->stop) ||
+ (mrq->data->stop && mrq->data->stop->error))) ||
+ (host->quirks & SDHCI_QUIRK_RESET_AFTER_REQUEST))) {
+
+ /* Some controllers need this kick or reset won't work here */
+ if (host->quirks & SDHCI_QUIRK_CLOCK_BEFORE_RESET)
+ /* This is to force an update */
+ host->ops->set_clock(host, host->clock);
+
+ /* Spec says we should do both at the same time, but Ricoh
+ controllers do not like that. */
+ sdhci_do_reset(host, SDHCI_RESET_CMD);
+ sdhci_do_reset(host, SDHCI_RESET_DATA);
+ }
+
+ host->mrq = NULL;
+ host->cmd = NULL;
+ host->data = NULL;
+
+#ifndef SDHCI_USE_LEDS_CLASS
+ sdhci_deactivate_led(host);
+#endif
+
+ mmiowb();
+ spin_unlock_irqrestore(&host->lock, flags);
+
+ mmc_request_done(host->mmc, mrq);
+ sdhci_runtime_pm_put(host);
+}
+
+static void sdhci_timeout_timer(unsigned long data)
+{
+ struct sdhci_host *host;
+ unsigned long flags;
+
+ host = (struct sdhci_host*)data;
+
+ spin_lock_irqsave(&host->lock, flags);
+
+ if (host->mrq) {
+ pr_err("%s: Timeout waiting for hardware "
+ "interrupt.\n", mmc_hostname(host->mmc));
+ sdhci_dumpregs(host);
+
+ if (host->data) {
+ host->data->error = -ETIMEDOUT;
+ sdhci_finish_data(host);
+ } else {
+ if (host->cmd)
+ host->cmd->error = -ETIMEDOUT;
+ else
+ host->mrq->cmd->error = -ETIMEDOUT;
+
+ tasklet_schedule(&host->finish_tasklet);
+ }
+ }
+
+ mmiowb();
+ spin_unlock_irqrestore(&host->lock, flags);
+}
+
+static void sdhci_tuning_timer(unsigned long data)
+{
+ struct sdhci_host *host;
+ unsigned long flags;
+
+ host = (struct sdhci_host *)data;
+
+ spin_lock_irqsave(&host->lock, flags);
+
+ host->flags |= SDHCI_NEEDS_RETUNING;
+
+ spin_unlock_irqrestore(&host->lock, flags);
+}
+
+/*****************************************************************************\
+ * *
+ * Interrupt handling *
+ * *
+\*****************************************************************************/
+
+static void sdhci_cmd_irq(struct sdhci_host *host, u32 intmask, u32 *mask)
+{
+ BUG_ON(intmask == 0);
+
+ if (!host->cmd) {
+ pr_err("%s: Got command interrupt 0x%08x even "
+ "though no command operation was in progress.\n",
+ mmc_hostname(host->mmc), (unsigned)intmask);
+ sdhci_dumpregs(host);
+ return;
+ }
+
+ if (intmask & SDHCI_INT_TIMEOUT)
+ host->cmd->error = -ETIMEDOUT;
+ else if (intmask & (SDHCI_INT_CRC | SDHCI_INT_END_BIT |
+ SDHCI_INT_INDEX))
+ host->cmd->error = -EILSEQ;
+
+ if (host->cmd->error) {
+ tasklet_schedule(&host->finish_tasklet);
+ return;
+ }
+
+ /*
+ * The host can send and interrupt when the busy state has
+ * ended, allowing us to wait without wasting CPU cycles.
+ * Unfortunately this is overloaded on the "data complete"
+ * interrupt, so we need to take some care when handling
+ * it.
+ *
+ * Note: The 1.0 specification is a bit ambiguous about this
+ * feature so there might be some problems with older
+ * controllers.
+ */
+ if (host->cmd->flags & MMC_RSP_BUSY) {
+ if (host->cmd->data)
+ DBG("Cannot wait for busy signal when also "
+ "doing a data transfer");
+ else if (!(host->quirks & SDHCI_QUIRK_NO_BUSY_IRQ)
+ && !host->busy_handle) {
+ /* Mark that command complete before busy is ended */
+ host->busy_handle = 1;
+ return;
+ }
+
+ /* The controller does not support the end-of-busy IRQ,
+ * fall through and take the SDHCI_INT_RESPONSE */
+ } else if ((host->quirks2 & SDHCI_QUIRK2_STOP_WITH_TC) &&
+ host->cmd->opcode == MMC_STOP_TRANSMISSION && !host->data) {
+ *mask &= ~SDHCI_INT_DATA_END;
+ }
+
+ if (intmask & SDHCI_INT_RESPONSE)
+ sdhci_finish_command(host);
+}
+
+#ifdef CONFIG_MMC_DEBUG
+static void sdhci_adma_show_error(struct sdhci_host *host)
+{
+ const char *name = mmc_hostname(host->mmc);
+ void *desc = host->adma_table;
+
+ sdhci_dumpregs(host);
+
+ while (true) {
+ struct sdhci_adma2_64_desc *dma_desc = desc;
+
+ if (host->flags & SDHCI_USE_64_BIT_DMA)
+ DBG("%s: %p: DMA 0x%08x%08x, LEN 0x%04x, Attr=0x%02x\n",
+ name, desc, le32_to_cpu(dma_desc->addr_hi),
+ le32_to_cpu(dma_desc->addr_lo),
+ le16_to_cpu(dma_desc->len),
+ le16_to_cpu(dma_desc->cmd));
+ else
+ DBG("%s: %p: DMA 0x%08x, LEN 0x%04x, Attr=0x%02x\n",
+ name, desc, le32_to_cpu(dma_desc->addr_lo),
+ le16_to_cpu(dma_desc->len),
+ le16_to_cpu(dma_desc->cmd));
+
+ desc += host->desc_sz;
+
+ if (dma_desc->cmd & cpu_to_le16(ADMA2_END))
+ break;
+ }
+}
+#else
+static void sdhci_adma_show_error(struct sdhci_host *host) { }
+#endif
+
+static void sdhci_data_irq(struct sdhci_host *host, u32 intmask)
+{
+ u32 command;
+ BUG_ON(intmask == 0);
+
+ /* CMD19 generates _only_ Buffer Read Ready interrupt */
+ if (intmask & SDHCI_INT_DATA_AVAIL) {
+ command = SDHCI_GET_CMD(sdhci_readw(host, SDHCI_COMMAND));
+ if (command == MMC_SEND_TUNING_BLOCK ||
+ command == MMC_SEND_TUNING_BLOCK_HS200) {
+ host->tuning_done = 1;
+ wake_up(&host->buf_ready_int);
+ return;
+ }
+ }
+
+ if (!host->data) {
+ /*
+ * The "data complete" interrupt is also used to
+ * indicate that a busy state has ended. See comment
+ * above in sdhci_cmd_irq().
+ */
+ if (host->cmd && (host->cmd->flags & MMC_RSP_BUSY)) {
+ if (intmask & SDHCI_INT_DATA_TIMEOUT) {
+ host->cmd->error = -ETIMEDOUT;
+ tasklet_schedule(&host->finish_tasklet);
+ return;
+ }
+ if (intmask & SDHCI_INT_DATA_END) {
+ /*
+ * Some cards handle busy-end interrupt
+ * before the command completed, so make
+ * sure we do things in the proper order.
+ */
+ if (host->busy_handle)
+ sdhci_finish_command(host);
+ else
+ host->busy_handle = 1;
+ return;
+ }
+ }
+
+ pr_err("%s: Got data interrupt 0x%08x even "
+ "though no data operation was in progress.\n",
+ mmc_hostname(host->mmc), (unsigned)intmask);
+ sdhci_dumpregs(host);
+
+ return;
+ }
+
+ if (intmask & SDHCI_INT_DATA_TIMEOUT)
+ host->data->error = -ETIMEDOUT;
+ else if (intmask & SDHCI_INT_DATA_END_BIT)
+ host->data->error = -EILSEQ;
+ else if ((intmask & SDHCI_INT_DATA_CRC) &&
+ SDHCI_GET_CMD(sdhci_readw(host, SDHCI_COMMAND))
+ != MMC_BUS_TEST_R)
+ host->data->error = -EILSEQ;
+ else if (intmask & SDHCI_INT_ADMA_ERROR) {
+ pr_err("%s: ADMA error\n", mmc_hostname(host->mmc));
+ sdhci_adma_show_error(host);
+ host->data->error = -EIO;
+ if (host->ops->adma_workaround)
+ host->ops->adma_workaround(host, intmask);
+ }
+
+ if (host->data->error)
+ sdhci_finish_data(host);
+ else {
+ if (intmask & (SDHCI_INT_DATA_AVAIL | SDHCI_INT_SPACE_AVAIL))
+ sdhci_transfer_pio(host);
+
+ /*
+ * We currently don't do anything fancy with DMA
+ * boundaries, but as we can't disable the feature
+ * we need to at least restart the transfer.
+ *
+ * According to the spec sdhci_readl(host, SDHCI_DMA_ADDRESS)
+ * should return a valid address to continue from, but as
+ * some controllers are faulty, don't trust them.
+ */
+ if (intmask & SDHCI_INT_DMA_END) {
+ u32 dmastart, dmanow;
+ dmastart = sg_dma_address(host->data->sg);
+ dmanow = dmastart + host->data->bytes_xfered;
+ /*
+ * Force update to the next DMA block boundary.
+ */
+ dmanow = (dmanow &
+ ~(SDHCI_DEFAULT_BOUNDARY_SIZE - 1)) +
+ SDHCI_DEFAULT_BOUNDARY_SIZE;
+ host->data->bytes_xfered = dmanow - dmastart;
+ DBG("%s: DMA base 0x%08x, transferred 0x%06x bytes,"
+ " next 0x%08x\n",
+ mmc_hostname(host->mmc), dmastart,
+ host->data->bytes_xfered, dmanow);
+ sdhci_writel(host, dmanow, SDHCI_DMA_ADDRESS);
+ }
+
+ if (intmask & SDHCI_INT_DATA_END) {
+ if (host->cmd) {
+ /*
+ * Data managed to finish before the
+ * command completed. Make sure we do
+ * things in the proper order.
+ */
+ host->data_early = 1;
+ } else {
+ sdhci_finish_data(host);
+ }
+ }
+ }
+}
+
+static irqreturn_t sdhci_irq(int irq, void *dev_id)
+{
+ irqreturn_t result = IRQ_NONE;
+ struct sdhci_host *host = dev_id;
+ u32 intmask, mask, unexpected = 0;
+ int max_loops = 16;
+
+ spin_lock(&host->lock);
+
+ if (host->runtime_suspended && !sdhci_sdio_irq_enabled(host)) {
+ spin_unlock(&host->lock);
+ return IRQ_NONE;
+ }
+
+ intmask = sdhci_readl(host, SDHCI_INT_STATUS);
+ if (!intmask || intmask == 0xffffffff) {
+ result = IRQ_NONE;
+ goto out;
+ }
+
+ do {
+ /* Clear selected interrupts. */
+ mask = intmask & (SDHCI_INT_CMD_MASK | SDHCI_INT_DATA_MASK |
+ SDHCI_INT_BUS_POWER);
+ sdhci_writel(host, mask, SDHCI_INT_STATUS);
+
+ DBG("*** %s got interrupt: 0x%08x\n",
+ mmc_hostname(host->mmc), intmask);
+
+ if (intmask & (SDHCI_INT_CARD_INSERT | SDHCI_INT_CARD_REMOVE)) {
+ u32 present = sdhci_readl(host, SDHCI_PRESENT_STATE) &
+ SDHCI_CARD_PRESENT;
+
+ /*
+ * There is a observation on i.mx esdhc. INSERT
+ * bit will be immediately set again when it gets
+ * cleared, if a card is inserted. We have to mask
+ * the irq to prevent interrupt storm which will
+ * freeze the system. And the REMOVE gets the
+ * same situation.
+ *
+ * More testing are needed here to ensure it works
+ * for other platforms though.
+ */
+ host->ier &= ~(SDHCI_INT_CARD_INSERT |
+ SDHCI_INT_CARD_REMOVE);
+ host->ier |= present ? SDHCI_INT_CARD_REMOVE :
+ SDHCI_INT_CARD_INSERT;
+ sdhci_writel(host, host->ier, SDHCI_INT_ENABLE);
+ sdhci_writel(host, host->ier, SDHCI_SIGNAL_ENABLE);
+
+ sdhci_writel(host, intmask & (SDHCI_INT_CARD_INSERT |
+ SDHCI_INT_CARD_REMOVE), SDHCI_INT_STATUS);
+
+ host->thread_isr |= intmask & (SDHCI_INT_CARD_INSERT |
+ SDHCI_INT_CARD_REMOVE);
+ result = IRQ_WAKE_THREAD;
+ }
+
+ if (intmask & SDHCI_INT_CMD_MASK)
+ sdhci_cmd_irq(host, intmask & SDHCI_INT_CMD_MASK,
+ &intmask);
+
+ if (intmask & SDHCI_INT_DATA_MASK)
+ sdhci_data_irq(host, intmask & SDHCI_INT_DATA_MASK);
+
+ if (intmask & SDHCI_INT_BUS_POWER)
+ pr_err("%s: Card is consuming too much power!\n",
+ mmc_hostname(host->mmc));
+
+ if (intmask & SDHCI_INT_CARD_INT) {
+ sdhci_enable_sdio_irq_nolock(host, false);
+ host->thread_isr |= SDHCI_INT_CARD_INT;
+ result = IRQ_WAKE_THREAD;
+ }
+
+ intmask &= ~(SDHCI_INT_CARD_INSERT | SDHCI_INT_CARD_REMOVE |
+ SDHCI_INT_CMD_MASK | SDHCI_INT_DATA_MASK |
+ SDHCI_INT_ERROR | SDHCI_INT_BUS_POWER |
+ SDHCI_INT_CARD_INT);
+
+ if (intmask) {
+ unexpected |= intmask;
+ sdhci_writel(host, intmask, SDHCI_INT_STATUS);
+ }
+
+ if (result == IRQ_NONE)
+ result = IRQ_HANDLED;
+
+ intmask = sdhci_readl(host, SDHCI_INT_STATUS);
+ } while (intmask && --max_loops);
+out:
+ spin_unlock(&host->lock);
+
+ if (unexpected) {
+ pr_err("%s: Unexpected interrupt 0x%08x.\n",
+ mmc_hostname(host->mmc), unexpected);
+ sdhci_dumpregs(host);
+ }
+
+ return result;
+}
+
+static irqreturn_t sdhci_thread_irq(int irq, void *dev_id)
+{
+ struct sdhci_host *host = dev_id;
+ unsigned long flags;
+ u32 isr;
+
+ spin_lock_irqsave(&host->lock, flags);
+ isr = host->thread_isr;
+ host->thread_isr = 0;
+ spin_unlock_irqrestore(&host->lock, flags);
+
+ if (isr & (SDHCI_INT_CARD_INSERT | SDHCI_INT_CARD_REMOVE)) {
+ sdhci_card_event(host->mmc);
+ mmc_detect_change(host->mmc, msecs_to_jiffies(200));
+ }
+
+ if (isr & SDHCI_INT_CARD_INT) {
+ sdio_run_irqs(host->mmc);
+
+ spin_lock_irqsave(&host->lock, flags);
+ if (host->flags & SDHCI_SDIO_IRQ_ENABLED)
+ sdhci_enable_sdio_irq_nolock(host, true);
+ spin_unlock_irqrestore(&host->lock, flags);
+ }
+
+ return isr ? IRQ_HANDLED : IRQ_NONE;
+}
+
+#ifdef CONFIG_PREEMPT_RT_BASE
+static irqreturn_t sdhci_rt_irq(int irq, void *dev_id)
+{
+ irqreturn_t ret;
+
+ local_bh_disable();
+ ret = sdhci_irq(irq, dev_id);
+ local_bh_enable();
+ if (ret == IRQ_WAKE_THREAD)
+ ret = sdhci_thread_irq(irq, dev_id);
+ return ret;
+}
+#endif
+
+static int sdhci_req_irq(struct sdhci_host *host)
+{
+#ifdef CONFIG_PREEMPT_RT_BASE
+ return request_threaded_irq(host->irq, NULL, sdhci_rt_irq,
+ IRQF_SHARED, mmc_hostname(host->mmc), host);
+#else
+ return request_threaded_irq(host->irq, sdhci_irq, sdhci_thread_irq,
+ IRQF_SHARED, mmc_hostname(host->mmc), host);
+#endif
+}
+
+/*****************************************************************************\
+ * *
+ * Suspend/resume *
+ * *
+\*****************************************************************************/
+
+#ifdef CONFIG_PM
+void sdhci_enable_irq_wakeups(struct sdhci_host *host)
+{
+ u8 val;
+ u8 mask = SDHCI_WAKE_ON_INSERT | SDHCI_WAKE_ON_REMOVE
+ | SDHCI_WAKE_ON_INT;
+
+ val = sdhci_readb(host, SDHCI_WAKE_UP_CONTROL);
+ val |= mask ;
+ /* Avoid fake wake up */
+ if (host->quirks & SDHCI_QUIRK_BROKEN_CARD_DETECTION)
+ val &= ~(SDHCI_WAKE_ON_INSERT | SDHCI_WAKE_ON_REMOVE);
+ sdhci_writeb(host, val, SDHCI_WAKE_UP_CONTROL);
+}
+EXPORT_SYMBOL_GPL(sdhci_enable_irq_wakeups);
+
+static void sdhci_disable_irq_wakeups(struct sdhci_host *host)
+{
+ u8 val;
+ u8 mask = SDHCI_WAKE_ON_INSERT | SDHCI_WAKE_ON_REMOVE
+ | SDHCI_WAKE_ON_INT;
+
+ val = sdhci_readb(host, SDHCI_WAKE_UP_CONTROL);
+ val &= ~mask;
+ sdhci_writeb(host, val, SDHCI_WAKE_UP_CONTROL);
+}
+
+int sdhci_suspend_host(struct sdhci_host *host)
+{
+ sdhci_disable_card_detection(host);
+
+ /* Disable tuning since we are suspending */
+ if (host->flags & SDHCI_USING_RETUNING_TIMER) {
+ del_timer_sync(&host->tuning_timer);
+ host->flags &= ~SDHCI_NEEDS_RETUNING;
+ }
+
+ if (!device_may_wakeup(mmc_dev(host->mmc))) {
+ host->ier = 0;
+ sdhci_writel(host, 0, SDHCI_INT_ENABLE);
+ sdhci_writel(host, 0, SDHCI_SIGNAL_ENABLE);
+ free_irq(host->irq, host);
+ } else {
+ sdhci_enable_irq_wakeups(host);
+ enable_irq_wake(host->irq);
+ }
+ return 0;
+}
+
+EXPORT_SYMBOL_GPL(sdhci_suspend_host);
+
+int sdhci_resume_host(struct sdhci_host *host)
+{
+ int ret = 0;
+
+ if (host->flags & (SDHCI_USE_SDMA | SDHCI_USE_ADMA)) {
+ if (host->ops->enable_dma)
+ host->ops->enable_dma(host);
+ }
+
+ if (!device_may_wakeup(mmc_dev(host->mmc))) {
+ ret = sdhci_req_irq(host);
+ if (ret)
+ return ret;
+ } else {
+ sdhci_disable_irq_wakeups(host);
+ disable_irq_wake(host->irq);
+ }
+
+ if ((host->mmc->pm_flags & MMC_PM_KEEP_POWER) &&
+ (host->quirks2 & SDHCI_QUIRK2_HOST_OFF_CARD_ON)) {
+ /* Card keeps power but host controller does not */
+ sdhci_init(host, 0);
+ host->pwr = 0;
+ host->clock = 0;
+ sdhci_do_set_ios(host, &host->mmc->ios);
+ } else {
+ sdhci_init(host, (host->mmc->pm_flags & MMC_PM_KEEP_POWER));
+ mmiowb();
+ }
+
+ sdhci_enable_card_detection(host);
+
+ /* Set the re-tuning expiration flag */
+ if (host->flags & SDHCI_USING_RETUNING_TIMER)
+ host->flags |= SDHCI_NEEDS_RETUNING;
+
+ return ret;
+}
+
+EXPORT_SYMBOL_GPL(sdhci_resume_host);
+
+static int sdhci_runtime_pm_get(struct sdhci_host *host)
+{
+ return pm_runtime_get_sync(host->mmc->parent);
+}
+
+static int sdhci_runtime_pm_put(struct sdhci_host *host)
+{
+ pm_runtime_mark_last_busy(host->mmc->parent);
+ return pm_runtime_put_autosuspend(host->mmc->parent);
+}
+
+static void sdhci_runtime_pm_bus_on(struct sdhci_host *host)
+{
+ if (host->runtime_suspended || host->bus_on)
+ return;
+ host->bus_on = true;
+ pm_runtime_get_noresume(host->mmc->parent);
+}
+
+static void sdhci_runtime_pm_bus_off(struct sdhci_host *host)
+{
+ if (host->runtime_suspended || !host->bus_on)
+ return;
+ host->bus_on = false;
+ pm_runtime_put_noidle(host->mmc->parent);
+}
+
+int sdhci_runtime_suspend_host(struct sdhci_host *host)
+{
+ unsigned long flags;
+
+ /* Disable tuning since we are suspending */
+ if (host->flags & SDHCI_USING_RETUNING_TIMER) {
+ del_timer_sync(&host->tuning_timer);
+ host->flags &= ~SDHCI_NEEDS_RETUNING;
+ }
+
+ spin_lock_irqsave(&host->lock, flags);
+ host->ier &= SDHCI_INT_CARD_INT;
+ sdhci_writel(host, host->ier, SDHCI_INT_ENABLE);
+ sdhci_writel(host, host->ier, SDHCI_SIGNAL_ENABLE);
+ spin_unlock_irqrestore(&host->lock, flags);
+
+ synchronize_hardirq(host->irq);
+
+ spin_lock_irqsave(&host->lock, flags);
+ host->runtime_suspended = true;
+ spin_unlock_irqrestore(&host->lock, flags);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(sdhci_runtime_suspend_host);
+
+int sdhci_runtime_resume_host(struct sdhci_host *host)
+{
+ unsigned long flags;
+ int host_flags = host->flags;
+
+ if (host_flags & (SDHCI_USE_SDMA | SDHCI_USE_ADMA)) {
+ if (host->ops->enable_dma)
+ host->ops->enable_dma(host);
+ }
+
+ sdhci_init(host, 0);
+
+ /* Force clock and power re-program */
+ host->pwr = 0;
+ host->clock = 0;
+ sdhci_do_start_signal_voltage_switch(host, &host->mmc->ios);
+ sdhci_do_set_ios(host, &host->mmc->ios);
+
+ if ((host_flags & SDHCI_PV_ENABLED) &&
+ !(host->quirks2 & SDHCI_QUIRK2_PRESET_VALUE_BROKEN)) {
+ spin_lock_irqsave(&host->lock, flags);
+ sdhci_enable_preset_value(host, true);
+ spin_unlock_irqrestore(&host->lock, flags);
+ }
+
+ /* Set the re-tuning expiration flag */
+ if (host->flags & SDHCI_USING_RETUNING_TIMER)
+ host->flags |= SDHCI_NEEDS_RETUNING;
+
+ spin_lock_irqsave(&host->lock, flags);
+
+ host->runtime_suspended = false;
+
+ /* Enable SDIO IRQ */
+ if (host->flags & SDHCI_SDIO_IRQ_ENABLED)
+ sdhci_enable_sdio_irq_nolock(host, true);
+
+ /* Enable Card Detection */
+ sdhci_enable_card_detection(host);
+
+ spin_unlock_irqrestore(&host->lock, flags);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(sdhci_runtime_resume_host);
+
+#endif /* CONFIG_PM */
+
+/*****************************************************************************\
+ * *
+ * Device allocation/registration *
+ * *
+\*****************************************************************************/
+
+struct sdhci_host *sdhci_alloc_host(struct device *dev,
+ size_t priv_size)
+{
+ struct mmc_host *mmc;
+ struct sdhci_host *host;
+
+ WARN_ON(dev == NULL);
+
+ mmc = mmc_alloc_host(sizeof(struct sdhci_host) + priv_size, dev);
+ if (!mmc)
+ return ERR_PTR(-ENOMEM);
+
+ host = mmc_priv(mmc);
+ host->mmc = mmc;
+
+ return host;
+}
+
+EXPORT_SYMBOL_GPL(sdhci_alloc_host);
+
+int sdhci_add_host(struct sdhci_host *host)
+{
+ struct mmc_host *mmc;
+ u32 caps[2] = {0, 0};
+ u32 max_current_caps;
+ unsigned int ocr_avail;
+ unsigned int override_timeout_clk;
+ int ret;
+
+ WARN_ON(host == NULL);
+ if (host == NULL)
+ return -EINVAL;
+
+ mmc = host->mmc;
+
+ if (debug_quirks)
+ host->quirks = debug_quirks;
+ if (debug_quirks2)
+ host->quirks2 = debug_quirks2;
+
+ override_timeout_clk = host->timeout_clk;
+
+ sdhci_do_reset(host, SDHCI_RESET_ALL);
+
+ host->version = sdhci_readw(host, SDHCI_HOST_VERSION);
+ host->version = (host->version & SDHCI_SPEC_VER_MASK)
+ >> SDHCI_SPEC_VER_SHIFT;
+ if (host->version > SDHCI_SPEC_300) {
+ pr_err("%s: Unknown controller version (%d). "
+ "You may experience problems.\n", mmc_hostname(mmc),
+ host->version);
+ }
+
+ caps[0] = (host->quirks & SDHCI_QUIRK_MISSING_CAPS) ? host->caps :
+ sdhci_readl(host, SDHCI_CAPABILITIES);
+
+ if (host->version >= SDHCI_SPEC_300)
+ caps[1] = (host->quirks & SDHCI_QUIRK_MISSING_CAPS) ?
+ host->caps1 :
+ sdhci_readl(host, SDHCI_CAPABILITIES_1);
+
+ if (host->quirks & SDHCI_QUIRK_FORCE_DMA)
+ host->flags |= SDHCI_USE_SDMA;
+ else if (!(caps[0] & SDHCI_CAN_DO_SDMA))
+ DBG("Controller doesn't have SDMA capability\n");
+ else
+ host->flags |= SDHCI_USE_SDMA;
+
+ if ((host->quirks & SDHCI_QUIRK_BROKEN_DMA) &&
+ (host->flags & SDHCI_USE_SDMA)) {
+ DBG("Disabling DMA as it is marked broken\n");
+ host->flags &= ~SDHCI_USE_SDMA;
+ }
+
+ if ((host->version >= SDHCI_SPEC_200) &&
+ (caps[0] & SDHCI_CAN_DO_ADMA2))
+ host->flags |= SDHCI_USE_ADMA;
+
+ if ((host->quirks & SDHCI_QUIRK_BROKEN_ADMA) &&
+ (host->flags & SDHCI_USE_ADMA)) {
+ DBG("Disabling ADMA as it is marked broken\n");
+ host->flags &= ~SDHCI_USE_ADMA;
+ }
+
+ /*
+ * It is assumed that a 64-bit capable device has set a 64-bit DMA mask
+ * and *must* do 64-bit DMA. A driver has the opportunity to change
+ * that during the first call to ->enable_dma(). Similarly
+ * SDHCI_QUIRK2_BROKEN_64_BIT_DMA must be left to the drivers to
+ * implement.
+ */
+ if (sdhci_readl(host, SDHCI_CAPABILITIES) & SDHCI_CAN_64BIT)
+ host->flags |= SDHCI_USE_64_BIT_DMA;
+
+ if (host->flags & (SDHCI_USE_SDMA | SDHCI_USE_ADMA)) {
+ if (host->ops->enable_dma) {
+ if (host->ops->enable_dma(host)) {
+ pr_warn("%s: No suitable DMA available - falling back to PIO\n",
+ mmc_hostname(mmc));
+ host->flags &=
+ ~(SDHCI_USE_SDMA | SDHCI_USE_ADMA);
+ }
+ }
+ }
+
+ /* SDMA does not support 64-bit DMA */
+ if (host->flags & SDHCI_USE_64_BIT_DMA)
+ host->flags &= ~SDHCI_USE_SDMA;
+
+ if (host->flags & SDHCI_USE_ADMA) {
+ /*
+ * The DMA descriptor table size is calculated as the maximum
+ * number of segments times 2, to allow for an alignment
+ * descriptor for each segment, plus 1 for a nop end descriptor,
+ * all multipled by the descriptor size.
+ */
+ if (host->flags & SDHCI_USE_64_BIT_DMA) {
+ host->adma_table_sz = (SDHCI_MAX_SEGS * 2 + 1) *
+ SDHCI_ADMA2_64_DESC_SZ;
+ host->align_buffer_sz = SDHCI_MAX_SEGS *
+ SDHCI_ADMA2_64_ALIGN;
+ host->desc_sz = SDHCI_ADMA2_64_DESC_SZ;
+ host->align_sz = SDHCI_ADMA2_64_ALIGN;
+ host->align_mask = SDHCI_ADMA2_64_ALIGN - 1;
+ } else {
+ host->adma_table_sz = (SDHCI_MAX_SEGS * 2 + 1) *
+ SDHCI_ADMA2_32_DESC_SZ;
+ host->align_buffer_sz = SDHCI_MAX_SEGS *
+ SDHCI_ADMA2_32_ALIGN;
+ host->desc_sz = SDHCI_ADMA2_32_DESC_SZ;
+ host->align_sz = SDHCI_ADMA2_32_ALIGN;
+ host->align_mask = SDHCI_ADMA2_32_ALIGN - 1;
+ }
+ host->adma_table = dma_alloc_coherent(mmc_dev(mmc),
+ host->adma_table_sz,
+ &host->adma_addr,
+ GFP_KERNEL);
+ host->align_buffer = kmalloc(host->align_buffer_sz, GFP_KERNEL);
+ if (!host->adma_table || !host->align_buffer) {
+ dma_free_coherent(mmc_dev(mmc), host->adma_table_sz,
+ host->adma_table, host->adma_addr);
+ kfree(host->align_buffer);
+ pr_warn("%s: Unable to allocate ADMA buffers - falling back to standard DMA\n",
+ mmc_hostname(mmc));
+ host->flags &= ~SDHCI_USE_ADMA;
+ host->adma_table = NULL;
+ host->align_buffer = NULL;
+ } else if (host->adma_addr & host->align_mask) {
+ pr_warn("%s: unable to allocate aligned ADMA descriptor\n",
+ mmc_hostname(mmc));
+ host->flags &= ~SDHCI_USE_ADMA;
+ dma_free_coherent(mmc_dev(mmc), host->adma_table_sz,
+ host->adma_table, host->adma_addr);
+ kfree(host->align_buffer);
+ host->adma_table = NULL;
+ host->align_buffer = NULL;
+ }
+ }
+
+ /*
+ * If we use DMA, then it's up to the caller to set the DMA
+ * mask, but PIO does not need the hw shim so we set a new
+ * mask here in that case.
+ */
+ if (!(host->flags & (SDHCI_USE_SDMA | SDHCI_USE_ADMA))) {
+ host->dma_mask = DMA_BIT_MASK(64);
+ mmc_dev(mmc)->dma_mask = &host->dma_mask;
+ }
+
+ if (host->version >= SDHCI_SPEC_300)
+ host->max_clk = (caps[0] & SDHCI_CLOCK_V3_BASE_MASK)
+ >> SDHCI_CLOCK_BASE_SHIFT;
+ else
+ host->max_clk = (caps[0] & SDHCI_CLOCK_BASE_MASK)
+ >> SDHCI_CLOCK_BASE_SHIFT;
+
+ host->max_clk *= 1000000;
+ if (host->max_clk == 0 || host->quirks &
+ SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN) {
+ if (!host->ops->get_max_clock) {
+ pr_err("%s: Hardware doesn't specify base clock "
+ "frequency.\n", mmc_hostname(mmc));
+ return -ENODEV;
+ }
+ host->max_clk = host->ops->get_max_clock(host);
+ }
+
+ host->next_data.cookie = 1;
+ /*
+ * In case of Host Controller v3.00, find out whether clock
+ * multiplier is supported.
+ */
+ host->clk_mul = (caps[1] & SDHCI_CLOCK_MUL_MASK) >>
+ SDHCI_CLOCK_MUL_SHIFT;
+
+ /*
+ * In case the value in Clock Multiplier is 0, then programmable
+ * clock mode is not supported, otherwise the actual clock
+ * multiplier is one more than the value of Clock Multiplier
+ * in the Capabilities Register.
+ */
+ if (host->clk_mul)
+ host->clk_mul += 1;
+
+ /*
+ * Set host parameters.
+ */
+ mmc->ops = &sdhci_ops;
+ mmc->f_max = host->max_clk;
+ if (host->ops->get_min_clock)
+ mmc->f_min = host->ops->get_min_clock(host);
+ else if (host->version >= SDHCI_SPEC_300) {
+ if (host->clk_mul) {
+ mmc->f_min = (host->max_clk * host->clk_mul) / 1024;
+ mmc->f_max = host->max_clk * host->clk_mul;
+ } else
+ mmc->f_min = host->max_clk / SDHCI_MAX_DIV_SPEC_300;
+ } else
+ mmc->f_min = host->max_clk / SDHCI_MAX_DIV_SPEC_200;
+
+ if (!(host->quirks & SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK)) {
+ host->timeout_clk = (caps[0] & SDHCI_TIMEOUT_CLK_MASK) >>
+ SDHCI_TIMEOUT_CLK_SHIFT;
+ if (host->timeout_clk == 0) {
+ if (host->ops->get_timeout_clock) {
+ host->timeout_clk =
+ host->ops->get_timeout_clock(host);
+ } else {
+ pr_err("%s: Hardware doesn't specify timeout clock frequency.\n",
+ mmc_hostname(mmc));
+ return -ENODEV;
+ }
+ }
+
+ if (caps[0] & SDHCI_TIMEOUT_CLK_UNIT)
+ host->timeout_clk *= 1000;
+
+ mmc->max_busy_timeout = host->ops->get_max_timeout_count ?
+ host->ops->get_max_timeout_count(host) : 1 << 27;
+ mmc->max_busy_timeout /= host->timeout_clk;
+ }
+
+ if (override_timeout_clk)
+ host->timeout_clk = override_timeout_clk;
+
+ mmc->caps |= MMC_CAP_SDIO_IRQ | MMC_CAP_ERASE | MMC_CAP_CMD23;
+ mmc->caps2 |= MMC_CAP2_SDIO_IRQ_NOTHREAD;
+
+ if (host->quirks & SDHCI_QUIRK_MULTIBLOCK_READ_ACMD12)
+ host->flags |= SDHCI_AUTO_CMD12;
+
+ /* Auto-CMD23 stuff only works in ADMA or PIO. */
+ if ((host->version >= SDHCI_SPEC_300) &&
+ ((host->flags & SDHCI_USE_ADMA) ||
+ !(host->flags & SDHCI_USE_SDMA)) &&
+ !(host->quirks2 & SDHCI_QUIRK2_ACMD23_BROKEN)) {
+ host->flags |= SDHCI_AUTO_CMD23;
+ DBG("%s: Auto-CMD23 available\n", mmc_hostname(mmc));
+ } else {
+ DBG("%s: Auto-CMD23 unavailable\n", mmc_hostname(mmc));
+ }
+
+ /*
+ * A controller may support 8-bit width, but the board itself
+ * might not have the pins brought out. Boards that support
+ * 8-bit width must set "mmc->caps |= MMC_CAP_8_BIT_DATA;" in
+ * their platform code before calling sdhci_add_host(), and we
+ * won't assume 8-bit width for hosts without that CAP.
+ */
+ if (!(host->quirks & SDHCI_QUIRK_FORCE_1_BIT_DATA))
+ mmc->caps |= MMC_CAP_4_BIT_DATA;
+
+ if (host->quirks2 & SDHCI_QUIRK2_HOST_NO_CMD23)
+ mmc->caps &= ~MMC_CAP_CMD23;
+
+ if (caps[0] & SDHCI_CAN_DO_HISPD)
+ mmc->caps |= MMC_CAP_SD_HIGHSPEED | MMC_CAP_MMC_HIGHSPEED;
+
+ if ((host->quirks & SDHCI_QUIRK_BROKEN_CARD_DETECTION) &&
+ !(mmc->caps & MMC_CAP_NONREMOVABLE))
+ mmc->caps |= MMC_CAP_NEEDS_POLL;
+
+ /* If there are external regulators, get them */
+ if (mmc_regulator_get_supply(mmc) == -EPROBE_DEFER)
+ return -EPROBE_DEFER;
+
+ /* If vqmmc regulator and no 1.8V signalling, then there's no UHS */
+ if (!IS_ERR(mmc->supply.vqmmc)) {
+ ret = regulator_enable(mmc->supply.vqmmc);
+ if (!regulator_is_supported_voltage(mmc->supply.vqmmc, 1700000,
+ 1950000))
+ caps[1] &= ~(SDHCI_SUPPORT_SDR104 |
+ SDHCI_SUPPORT_SDR50 |
+ SDHCI_SUPPORT_DDR50);
+ if (ret) {
+ pr_warn("%s: Failed to enable vqmmc regulator: %d\n",
+ mmc_hostname(mmc), ret);
+ mmc->supply.vqmmc = ERR_PTR(-EINVAL);
+ }
+ }
+
+ if (host->quirks2 & SDHCI_QUIRK2_NO_1_8_V)
+ caps[1] &= ~(SDHCI_SUPPORT_SDR104 | SDHCI_SUPPORT_SDR50 |
+ SDHCI_SUPPORT_DDR50);
+
+ /* Any UHS-I mode in caps implies SDR12 and SDR25 support. */
+ if (caps[1] & (SDHCI_SUPPORT_SDR104 | SDHCI_SUPPORT_SDR50 |
+ SDHCI_SUPPORT_DDR50))
+ mmc->caps |= MMC_CAP_UHS_SDR12 | MMC_CAP_UHS_SDR25;
+
+ /* SDR104 supports also implies SDR50 support */
+ if (caps[1] & SDHCI_SUPPORT_SDR104) {
+ mmc->caps |= MMC_CAP_UHS_SDR104 | MMC_CAP_UHS_SDR50;
+ /* SD3.0: SDR104 is supported so (for eMMC) the caps2
+ * field can be promoted to support HS200.
+ */
+ if (!(host->quirks2 & SDHCI_QUIRK2_BROKEN_HS200))
+ mmc->caps2 |= MMC_CAP2_HS200;
+ } else if (caps[1] & SDHCI_SUPPORT_SDR50)
+ mmc->caps |= MMC_CAP_UHS_SDR50;
+
+ if (host->quirks2 & SDHCI_QUIRK2_CAPS_BIT63_FOR_HS400 &&
+ (caps[1] & SDHCI_SUPPORT_HS400))
+ mmc->caps2 |= MMC_CAP2_HS400;
+
+ if ((mmc->caps2 & MMC_CAP2_HSX00_1_2V) &&
+ (IS_ERR(mmc->supply.vqmmc) ||
+ !regulator_is_supported_voltage(mmc->supply.vqmmc, 1100000,
+ 1300000)))
+ mmc->caps2 &= ~MMC_CAP2_HSX00_1_2V;
+
+ if ((caps[1] & SDHCI_SUPPORT_DDR50) &&
+ !(host->quirks2 & SDHCI_QUIRK2_BROKEN_DDR50))
+ mmc->caps |= MMC_CAP_UHS_DDR50;
+
+ /* Does the host need tuning for SDR50? */
+ if (caps[1] & SDHCI_USE_SDR50_TUNING)
+ host->flags |= SDHCI_SDR50_NEEDS_TUNING;
+
+ /* Does the host need tuning for SDR104 / HS200? */
+ if (mmc->caps2 & MMC_CAP2_HS200)
+ host->flags |= SDHCI_SDR104_NEEDS_TUNING;
+
+ /* Driver Type(s) (A, C, D) supported by the host */
+ if (caps[1] & SDHCI_DRIVER_TYPE_A)
+ mmc->caps |= MMC_CAP_DRIVER_TYPE_A;
+ if (caps[1] & SDHCI_DRIVER_TYPE_C)
+ mmc->caps |= MMC_CAP_DRIVER_TYPE_C;
+ if (caps[1] & SDHCI_DRIVER_TYPE_D)
+ mmc->caps |= MMC_CAP_DRIVER_TYPE_D;
+
+ /* Initial value for re-tuning timer count */
+ host->tuning_count = (caps[1] & SDHCI_RETUNING_TIMER_COUNT_MASK) >>
+ SDHCI_RETUNING_TIMER_COUNT_SHIFT;
+
+ /*
+ * In case Re-tuning Timer is not disabled, the actual value of
+ * re-tuning timer will be 2 ^ (n - 1).
+ */
+ if (host->tuning_count)
+ host->tuning_count = 1 << (host->tuning_count - 1);
+
+ /* Re-tuning mode supported by the Host Controller */
+ host->tuning_mode = (caps[1] & SDHCI_RETUNING_MODE_MASK) >>
+ SDHCI_RETUNING_MODE_SHIFT;
+
+ ocr_avail = 0;
+
+ /*
+ * According to SD Host Controller spec v3.00, if the Host System
+ * can afford more than 150mA, Host Driver should set XPC to 1. Also
+ * the value is meaningful only if Voltage Support in the Capabilities
+ * register is set. The actual current value is 4 times the register
+ * value.
+ */
+ max_current_caps = sdhci_readl(host, SDHCI_MAX_CURRENT);
+ if (!max_current_caps && !IS_ERR(mmc->supply.vmmc)) {
+ int curr = regulator_get_current_limit(mmc->supply.vmmc);
+ if (curr > 0) {
+
+ /* convert to SDHCI_MAX_CURRENT format */
+ curr = curr/1000; /* convert to mA */
+ curr = curr/SDHCI_MAX_CURRENT_MULTIPLIER;
+
+ curr = min_t(u32, curr, SDHCI_MAX_CURRENT_LIMIT);
+ max_current_caps =
+ (curr << SDHCI_MAX_CURRENT_330_SHIFT) |
+ (curr << SDHCI_MAX_CURRENT_300_SHIFT) |
+ (curr << SDHCI_MAX_CURRENT_180_SHIFT);
+ }
+ }
+
+ if (caps[0] & SDHCI_CAN_VDD_330) {
+ ocr_avail |= MMC_VDD_32_33 | MMC_VDD_33_34;
+
+ mmc->max_current_330 = ((max_current_caps &
+ SDHCI_MAX_CURRENT_330_MASK) >>
+ SDHCI_MAX_CURRENT_330_SHIFT) *
+ SDHCI_MAX_CURRENT_MULTIPLIER;
+ }
+ if (caps[0] & SDHCI_CAN_VDD_300) {
+ ocr_avail |= MMC_VDD_29_30 | MMC_VDD_30_31;
+
+ mmc->max_current_300 = ((max_current_caps &
+ SDHCI_MAX_CURRENT_300_MASK) >>
+ SDHCI_MAX_CURRENT_300_SHIFT) *
+ SDHCI_MAX_CURRENT_MULTIPLIER;
+ }
+ if (caps[0] & SDHCI_CAN_VDD_180) {
+ ocr_avail |= MMC_VDD_165_195;
+
+ mmc->max_current_180 = ((max_current_caps &
+ SDHCI_MAX_CURRENT_180_MASK) >>
+ SDHCI_MAX_CURRENT_180_SHIFT) *
+ SDHCI_MAX_CURRENT_MULTIPLIER;
+ }
+
+ /* If OCR set by external regulators, use it instead */
+ if (mmc->ocr_avail)
+ ocr_avail = mmc->ocr_avail;
+
+ if (host->ocr_mask)
+ ocr_avail &= host->ocr_mask;
+
+ mmc->ocr_avail = ocr_avail;
+ mmc->ocr_avail_sdio = ocr_avail;
+ if (host->ocr_avail_sdio)
+ mmc->ocr_avail_sdio &= host->ocr_avail_sdio;
+ mmc->ocr_avail_sd = ocr_avail;
+ if (host->ocr_avail_sd)
+ mmc->ocr_avail_sd &= host->ocr_avail_sd;
+ else /* normal SD controllers don't support 1.8V */
+ mmc->ocr_avail_sd &= ~MMC_VDD_165_195;
+ mmc->ocr_avail_mmc = ocr_avail;
+ if (host->ocr_avail_mmc)
+ mmc->ocr_avail_mmc &= host->ocr_avail_mmc;
+
+ if (mmc->ocr_avail == 0) {
+ pr_err("%s: Hardware doesn't report any "
+ "support voltages.\n", mmc_hostname(mmc));
+ return -ENODEV;
+ }
+
+ spin_lock_init(&host->lock);
+
+ /*
+ * Maximum number of segments. Depends on if the hardware
+ * can do scatter/gather or not.
+ */
+ if (host->flags & SDHCI_USE_ADMA)
+ mmc->max_segs = SDHCI_MAX_SEGS;
+ else if (host->flags & SDHCI_USE_SDMA)
+ mmc->max_segs = 1;
+ else /* PIO */
+ mmc->max_segs = SDHCI_MAX_SEGS;
+
+ /*
+ * Maximum number of sectors in one transfer. Limited by SDMA boundary
+ * size (512KiB). Note some tuning modes impose a 4MiB limit, but this
+ * is less anyway.
+ */
+ mmc->max_req_size = 524288;
+
+ /*
+ * Maximum segment size. Could be one segment with the maximum number
+ * of bytes. When doing hardware scatter/gather, each entry cannot
+ * be larger than 64 KiB though.
+ */
+ if (host->flags & SDHCI_USE_ADMA) {
+ if (host->quirks & SDHCI_QUIRK_BROKEN_ADMA_ZEROLEN_DESC)
+ mmc->max_seg_size = 65535;
+ else
+ mmc->max_seg_size = 65536;
+ } else {
+ mmc->max_seg_size = mmc->max_req_size;
+ }
+
+ /*
+ * Maximum block size. This varies from controller to controller and
+ * is specified in the capabilities register.
+ */
+ if (host->quirks & SDHCI_QUIRK_FORCE_BLK_SZ_2048) {
+ mmc->max_blk_size = 2;
+ } else {
+ mmc->max_blk_size = (caps[0] & SDHCI_MAX_BLOCK_MASK) >>
+ SDHCI_MAX_BLOCK_SHIFT;
+ if (mmc->max_blk_size >= 3) {
+ pr_warn("%s: Invalid maximum block size, assuming 512 bytes\n",
+ mmc_hostname(mmc));
+ mmc->max_blk_size = 0;
+ }
+ }
+
+ mmc->max_blk_size = 512 << mmc->max_blk_size;
+
+ /*
+ * Maximum block count.
+ */
+ mmc->max_blk_count = (host->quirks & SDHCI_QUIRK_NO_MULTIBLOCK) ? 1 : 65535;
+
+ /*
+ * Init tasklets.
+ */
+ tasklet_init(&host->finish_tasklet,
+ sdhci_tasklet_finish, (unsigned long)host);
+
+ setup_timer(&host->timer, sdhci_timeout_timer, (unsigned long)host);
+
+ init_waitqueue_head(&host->buf_ready_int);
+
+ if (host->version >= SDHCI_SPEC_300) {
+ /* Initialize re-tuning timer */
+ init_timer(&host->tuning_timer);
+ host->tuning_timer.data = (unsigned long)host;
+ host->tuning_timer.function = sdhci_tuning_timer;
+ }
+
+ sdhci_init(host, 0);
+
+ ret = sdhci_req_irq(host);
+ if (ret) {
+ pr_err("%s: Failed to request IRQ %d: %d\n",
+ mmc_hostname(mmc), host->irq, ret);
+ goto untasklet;
+ }
+
+#ifdef CONFIG_MMC_DEBUG
+ sdhci_dumpregs(host);
+#endif
+
+#ifdef SDHCI_USE_LEDS_CLASS
+ snprintf(host->led_name, sizeof(host->led_name),
+ "%s::", mmc_hostname(mmc));
+ host->led.name = host->led_name;
+ host->led.brightness = LED_OFF;
+ host->led.default_trigger = mmc_hostname(mmc);
+ host->led.brightness_set = sdhci_led_control;
+
+ ret = led_classdev_register(mmc_dev(mmc), &host->led);
+ if (ret) {
+ pr_err("%s: Failed to register LED device: %d\n",
+ mmc_hostname(mmc), ret);
+ goto reset;
+ }
+#endif
+
+ mmiowb();
+
+ mmc_add_host(mmc);
+
+ pr_info("%s: SDHCI controller on %s [%s] using %s\n",
+ mmc_hostname(mmc), host->hw_name, dev_name(mmc_dev(mmc)),
+ (host->flags & SDHCI_USE_ADMA) ?
+ (host->flags & SDHCI_USE_64_BIT_DMA) ? "ADMA 64-bit" : "ADMA" :
+ (host->flags & SDHCI_USE_SDMA) ? "DMA" : "PIO");
+
+ sdhci_enable_card_detection(host);
+
+ return 0;
+
+#ifdef SDHCI_USE_LEDS_CLASS
+reset:
+ sdhci_do_reset(host, SDHCI_RESET_ALL);
+ sdhci_writel(host, 0, SDHCI_INT_ENABLE);
+ sdhci_writel(host, 0, SDHCI_SIGNAL_ENABLE);
+ free_irq(host->irq, host);
+#endif
+untasklet:
+ tasklet_kill(&host->finish_tasklet);
+
+ return ret;
+}
+
+EXPORT_SYMBOL_GPL(sdhci_add_host);
+
+void sdhci_remove_host(struct sdhci_host *host, int dead)
+{
+ struct mmc_host *mmc = host->mmc;
+ unsigned long flags;
+
+ if (dead) {
+ spin_lock_irqsave(&host->lock, flags);
+
+ host->flags |= SDHCI_DEVICE_DEAD;
+
+ if (host->mrq) {
+ pr_err("%s: Controller removed during "
+ " transfer!\n", mmc_hostname(mmc));
+
+ host->mrq->cmd->error = -ENOMEDIUM;
+ tasklet_schedule(&host->finish_tasklet);
+ }
+
+ spin_unlock_irqrestore(&host->lock, flags);
+ }
+
+ sdhci_disable_card_detection(host);
+
+ mmc_remove_host(mmc);
+
+#ifdef SDHCI_USE_LEDS_CLASS
+ led_classdev_unregister(&host->led);
+#endif
+
+ if (!dead)
+ sdhci_do_reset(host, SDHCI_RESET_ALL);
+
+ sdhci_writel(host, 0, SDHCI_INT_ENABLE);
+ sdhci_writel(host, 0, SDHCI_SIGNAL_ENABLE);
+ free_irq(host->irq, host);
+
+ del_timer_sync(&host->timer);
+
+ tasklet_kill(&host->finish_tasklet);
+
+ if (!IS_ERR(mmc->supply.vqmmc))
+ regulator_disable(mmc->supply.vqmmc);
+
+ if (host->adma_table)
+ dma_free_coherent(mmc_dev(mmc), host->adma_table_sz,
+ host->adma_table, host->adma_addr);
+ kfree(host->align_buffer);
+
+ host->adma_table = NULL;
+ host->align_buffer = NULL;
+}
+
+EXPORT_SYMBOL_GPL(sdhci_remove_host);
+
+void sdhci_free_host(struct sdhci_host *host)
+{
+ mmc_free_host(host->mmc);
+}
+
+EXPORT_SYMBOL_GPL(sdhci_free_host);
+
+/*****************************************************************************\
+ * *
+ * Driver init/exit *
+ * *
+\*****************************************************************************/
+
+static int __init sdhci_drv_init(void)
+{
+ pr_info(DRIVER_NAME
+ ": Secure Digital Host Controller Interface driver\n");
+ pr_info(DRIVER_NAME ": Copyright(c) Pierre Ossman\n");
+
+ return 0;
+}
+
+static void __exit sdhci_drv_exit(void)
+{
+}
+
+module_init(sdhci_drv_init);
+module_exit(sdhci_drv_exit);
+
+module_param(debug_quirks, uint, 0444);
+module_param(debug_quirks2, uint, 0444);
+
+MODULE_AUTHOR("Pierre Ossman <pierre@ossman.eu>");
+MODULE_DESCRIPTION("Secure Digital Host Controller Interface core driver");
+MODULE_LICENSE("GPL");
+
+MODULE_PARM_DESC(debug_quirks, "Force certain quirks.");
+MODULE_PARM_DESC(debug_quirks2, "Force certain other quirks.");