diff options
Diffstat (limited to 'kernel/drivers/mmc/host/sdhci-st.c')
| -rw-r--r-- | kernel/drivers/mmc/host/sdhci-st.c | 512 |
1 files changed, 512 insertions, 0 deletions
diff --git a/kernel/drivers/mmc/host/sdhci-st.c b/kernel/drivers/mmc/host/sdhci-st.c new file mode 100644 index 000000000..682f2bb0f --- /dev/null +++ b/kernel/drivers/mmc/host/sdhci-st.c @@ -0,0 +1,512 @@ +/* + * Support for SDHCI on STMicroelectronics SoCs + * + * Copyright (C) 2014 STMicroelectronics Ltd + * Author: Giuseppe Cavallaro <peppe.cavallaro@st.com> + * Contributors: Peter Griffin <peter.griffin@linaro.org> + * + * Based on sdhci-cns3xxx.c + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#include <linux/io.h> +#include <linux/of.h> +#include <linux/module.h> +#include <linux/err.h> +#include <linux/mmc/host.h> +#include <linux/reset.h> +#include "sdhci-pltfm.h" + +struct st_mmc_platform_data { + struct reset_control *rstc; + void __iomem *top_ioaddr; +}; + +/* MMCSS glue logic to setup the HC on some ST SoCs (e.g. STiH407 family) */ + +#define ST_MMC_CCONFIG_REG_1 0x400 +#define ST_MMC_CCONFIG_TIMEOUT_CLK_UNIT BIT(24) +#define ST_MMC_CCONFIG_TIMEOUT_CLK_FREQ BIT(12) +#define ST_MMC_CCONFIG_TUNING_COUNT_DEFAULT BIT(8) +#define ST_MMC_CCONFIG_ASYNC_WAKEUP BIT(0) +#define ST_MMC_CCONFIG_1_DEFAULT \ + ((ST_MMC_CCONFIG_TIMEOUT_CLK_UNIT) | \ + (ST_MMC_CCONFIG_TIMEOUT_CLK_FREQ) | \ + (ST_MMC_CCONFIG_TUNING_COUNT_DEFAULT)) + +#define ST_MMC_CCONFIG_REG_2 0x404 +#define ST_MMC_CCONFIG_HIGH_SPEED BIT(28) +#define ST_MMC_CCONFIG_ADMA2 BIT(24) +#define ST_MMC_CCONFIG_8BIT BIT(20) +#define ST_MMC_CCONFIG_MAX_BLK_LEN 16 +#define MAX_BLK_LEN_1024 1 +#define MAX_BLK_LEN_2048 2 +#define BASE_CLK_FREQ_200 0xc8 +#define BASE_CLK_FREQ_100 0x64 +#define BASE_CLK_FREQ_50 0x32 +#define ST_MMC_CCONFIG_2_DEFAULT \ + (ST_MMC_CCONFIG_HIGH_SPEED | ST_MMC_CCONFIG_ADMA2 | \ + ST_MMC_CCONFIG_8BIT | \ + (MAX_BLK_LEN_1024 << ST_MMC_CCONFIG_MAX_BLK_LEN)) + +#define ST_MMC_CCONFIG_REG_3 0x408 +#define ST_MMC_CCONFIG_EMMC_SLOT_TYPE BIT(28) +#define ST_MMC_CCONFIG_64BIT BIT(24) +#define ST_MMC_CCONFIG_ASYNCH_INTR_SUPPORT BIT(20) +#define ST_MMC_CCONFIG_1P8_VOLT BIT(16) +#define ST_MMC_CCONFIG_3P0_VOLT BIT(12) +#define ST_MMC_CCONFIG_3P3_VOLT BIT(8) +#define ST_MMC_CCONFIG_SUSP_RES_SUPPORT BIT(4) +#define ST_MMC_CCONFIG_SDMA BIT(0) +#define ST_MMC_CCONFIG_3_DEFAULT \ + (ST_MMC_CCONFIG_ASYNCH_INTR_SUPPORT | \ + ST_MMC_CCONFIG_3P3_VOLT | \ + ST_MMC_CCONFIG_SUSP_RES_SUPPORT | \ + ST_MMC_CCONFIG_SDMA) + +#define ST_MMC_CCONFIG_REG_4 0x40c +#define ST_MMC_CCONFIG_D_DRIVER BIT(20) +#define ST_MMC_CCONFIG_C_DRIVER BIT(16) +#define ST_MMC_CCONFIG_A_DRIVER BIT(12) +#define ST_MMC_CCONFIG_DDR50 BIT(8) +#define ST_MMC_CCONFIG_SDR104 BIT(4) +#define ST_MMC_CCONFIG_SDR50 BIT(0) +#define ST_MMC_CCONFIG_4_DEFAULT 0 + +#define ST_MMC_CCONFIG_REG_5 0x410 +#define ST_MMC_CCONFIG_TUNING_FOR_SDR50 BIT(8) +#define RETUNING_TIMER_CNT_MAX 0xf +#define ST_MMC_CCONFIG_5_DEFAULT 0 + +/* I/O configuration for Arasan IP */ +#define ST_MMC_GP_OUTPUT 0x450 +#define ST_MMC_GP_OUTPUT_CD BIT(12) + +#define ST_MMC_STATUS_R 0x460 + +#define ST_TOP_MMC_DLY_FIX_OFF(x) (x - 0x8) + +/* TOP config registers to manage static and dynamic delay */ +#define ST_TOP_MMC_TX_CLK_DLY ST_TOP_MMC_DLY_FIX_OFF(0x8) +#define ST_TOP_MMC_RX_CLK_DLY ST_TOP_MMC_DLY_FIX_OFF(0xc) +/* MMC delay control register */ +#define ST_TOP_MMC_DLY_CTRL ST_TOP_MMC_DLY_FIX_OFF(0x18) +#define ST_TOP_MMC_DLY_CTRL_DLL_BYPASS_CMD BIT(0) +#define ST_TOP_MMC_DLY_CTRL_DLL_BYPASS_PH_SEL BIT(1) +#define ST_TOP_MMC_DLY_CTRL_TX_DLL_ENABLE BIT(8) +#define ST_TOP_MMC_DLY_CTRL_RX_DLL_ENABLE BIT(9) +#define ST_TOP_MMC_DLY_CTRL_ATUNE_NOT_CFG_DLY BIT(10) +#define ST_TOP_MMC_START_DLL_LOCK BIT(11) + +/* register to provide the phase-shift value for DLL */ +#define ST_TOP_MMC_TX_DLL_STEP_DLY ST_TOP_MMC_DLY_FIX_OFF(0x1c) +#define ST_TOP_MMC_RX_DLL_STEP_DLY ST_TOP_MMC_DLY_FIX_OFF(0x20) +#define ST_TOP_MMC_RX_CMD_STEP_DLY ST_TOP_MMC_DLY_FIX_OFF(0x24) + +/* phase shift delay on the tx clk 2.188ns */ +#define ST_TOP_MMC_TX_DLL_STEP_DLY_VALID 0x6 + +#define ST_TOP_MMC_DLY_MAX 0xf + +#define ST_TOP_MMC_DYN_DLY_CONF \ + (ST_TOP_MMC_DLY_CTRL_TX_DLL_ENABLE | \ + ST_TOP_MMC_DLY_CTRL_ATUNE_NOT_CFG_DLY | \ + ST_TOP_MMC_START_DLL_LOCK) + +/* + * For clock speeds greater than 90MHz, we need to check that the + * DLL procedure has finished before switching to ultra-speed modes. + */ +#define CLK_TO_CHECK_DLL_LOCK 90000000 + +static inline void st_mmcss_set_static_delay(void __iomem *ioaddr) +{ + if (!ioaddr) + return; + + writel_relaxed(0x0, ioaddr + ST_TOP_MMC_DLY_CTRL); + writel_relaxed(ST_TOP_MMC_DLY_MAX, + ioaddr + ST_TOP_MMC_TX_CLK_DLY); +} + +/** + * st_mmcss_cconfig: configure the Arasan HC inside the flashSS. + * @np: dt device node. + * @host: sdhci host + * Description: this function is to configure the Arasan host controller. + * On some ST SoCs, i.e. STiH407 family, the MMC devices inside a dedicated + * flashSS sub-system which needs to be configured to be compliant to eMMC 4.5 + * or eMMC4.3. This has to be done before registering the sdhci host. + */ +static void st_mmcss_cconfig(struct device_node *np, struct sdhci_host *host) +{ + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); + struct mmc_host *mhost = host->mmc; + u32 cconf2, cconf3, cconf4, cconf5; + + if (!of_device_is_compatible(np, "st,sdhci-stih407")) + return; + + cconf2 = ST_MMC_CCONFIG_2_DEFAULT; + cconf3 = ST_MMC_CCONFIG_3_DEFAULT; + cconf4 = ST_MMC_CCONFIG_4_DEFAULT; + cconf5 = ST_MMC_CCONFIG_5_DEFAULT; + + writel_relaxed(ST_MMC_CCONFIG_1_DEFAULT, + host->ioaddr + ST_MMC_CCONFIG_REG_1); + + /* Set clock frequency, default to 50MHz if max-frequency is not + * provided */ + + switch (mhost->f_max) { + case 200000000: + clk_set_rate(pltfm_host->clk, mhost->f_max); + cconf2 |= BASE_CLK_FREQ_200; + break; + case 100000000: + clk_set_rate(pltfm_host->clk, mhost->f_max); + cconf2 |= BASE_CLK_FREQ_100; + break; + default: + clk_set_rate(pltfm_host->clk, 50000000); + cconf2 |= BASE_CLK_FREQ_50; + } + + writel_relaxed(cconf2, host->ioaddr + ST_MMC_CCONFIG_REG_2); + + if (mhost->caps & MMC_CAP_NONREMOVABLE) + cconf3 |= ST_MMC_CCONFIG_EMMC_SLOT_TYPE; + else + /* CARD _D ET_CTRL */ + writel_relaxed(ST_MMC_GP_OUTPUT_CD, + host->ioaddr + ST_MMC_GP_OUTPUT); + + if (mhost->caps & MMC_CAP_UHS_SDR50) { + /* use 1.8V */ + cconf3 |= ST_MMC_CCONFIG_1P8_VOLT; + cconf4 |= ST_MMC_CCONFIG_SDR50; + /* Use tuning */ + cconf5 |= ST_MMC_CCONFIG_TUNING_FOR_SDR50; + /* Max timeout for retuning */ + cconf5 |= RETUNING_TIMER_CNT_MAX; + } + + if (mhost->caps & MMC_CAP_UHS_SDR104) { + /* + * SDR104 implies the HC can support HS200 mode, so + * it's mandatory to use 1.8V + */ + cconf3 |= ST_MMC_CCONFIG_1P8_VOLT; + cconf4 |= ST_MMC_CCONFIG_SDR104; + /* Max timeout for retuning */ + cconf5 |= RETUNING_TIMER_CNT_MAX; + } + + if (mhost->caps & MMC_CAP_UHS_DDR50) + cconf4 |= ST_MMC_CCONFIG_DDR50; + + writel_relaxed(cconf3, host->ioaddr + ST_MMC_CCONFIG_REG_3); + writel_relaxed(cconf4, host->ioaddr + ST_MMC_CCONFIG_REG_4); + writel_relaxed(cconf5, host->ioaddr + ST_MMC_CCONFIG_REG_5); +} + +static inline void st_mmcss_set_dll(void __iomem *ioaddr) +{ + if (!ioaddr) + return; + + writel_relaxed(ST_TOP_MMC_DYN_DLY_CONF, ioaddr + ST_TOP_MMC_DLY_CTRL); + writel_relaxed(ST_TOP_MMC_TX_DLL_STEP_DLY_VALID, + ioaddr + ST_TOP_MMC_TX_DLL_STEP_DLY); +} + +static int st_mmcss_lock_dll(void __iomem *ioaddr) +{ + unsigned long curr, value; + unsigned long finish = jiffies + HZ; + + /* Checks if the DLL procedure is finished */ + do { + curr = jiffies; + value = readl(ioaddr + ST_MMC_STATUS_R); + if (value & 0x1) + return 0; + + cpu_relax(); + } while (!time_after_eq(curr, finish)); + + return -EBUSY; +} + +static int sdhci_st_set_dll_for_clock(struct sdhci_host *host) +{ + int ret = 0; + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); + struct st_mmc_platform_data *pdata = pltfm_host->priv; + + if (host->clock > CLK_TO_CHECK_DLL_LOCK) { + st_mmcss_set_dll(pdata->top_ioaddr); + ret = st_mmcss_lock_dll(host->ioaddr); + } + + return ret; +} + +static void sdhci_st_set_uhs_signaling(struct sdhci_host *host, + unsigned int uhs) +{ + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); + struct st_mmc_platform_data *pdata = pltfm_host->priv; + u16 ctrl_2 = sdhci_readw(host, SDHCI_HOST_CONTROL2); + int ret = 0; + + /* Select Bus Speed Mode for host */ + ctrl_2 &= ~SDHCI_CTRL_UHS_MASK; + switch (uhs) { + /* + * Set V18_EN -- UHS modes do not work without this. + * does not change signaling voltage + */ + + case MMC_TIMING_UHS_SDR12: + st_mmcss_set_static_delay(pdata->top_ioaddr); + ctrl_2 |= SDHCI_CTRL_UHS_SDR12 | SDHCI_CTRL_VDD_180; + break; + case MMC_TIMING_UHS_SDR25: + st_mmcss_set_static_delay(pdata->top_ioaddr); + ctrl_2 |= SDHCI_CTRL_UHS_SDR25 | SDHCI_CTRL_VDD_180; + break; + case MMC_TIMING_UHS_SDR50: + st_mmcss_set_static_delay(pdata->top_ioaddr); + ctrl_2 |= SDHCI_CTRL_UHS_SDR50 | SDHCI_CTRL_VDD_180; + ret = sdhci_st_set_dll_for_clock(host); + break; + case MMC_TIMING_UHS_SDR104: + case MMC_TIMING_MMC_HS200: + st_mmcss_set_static_delay(pdata->top_ioaddr); + ctrl_2 |= SDHCI_CTRL_UHS_SDR104 | SDHCI_CTRL_VDD_180; + ret = sdhci_st_set_dll_for_clock(host); + break; + case MMC_TIMING_UHS_DDR50: + case MMC_TIMING_MMC_DDR52: + st_mmcss_set_static_delay(pdata->top_ioaddr); + ctrl_2 |= SDHCI_CTRL_UHS_DDR50 | SDHCI_CTRL_VDD_180; + break; + } + + if (ret) + dev_warn(mmc_dev(host->mmc), "Error setting dll for clock " + "(uhs %d)\n", uhs); + + dev_dbg(mmc_dev(host->mmc), "uhs %d, ctrl_2 %04X\n", uhs, ctrl_2); + + sdhci_writew(host, ctrl_2, SDHCI_HOST_CONTROL2); +} + +static u32 sdhci_st_readl(struct sdhci_host *host, int reg) +{ + u32 ret; + + switch (reg) { + case SDHCI_CAPABILITIES: + ret = readl_relaxed(host->ioaddr + reg); + /* Support 3.3V and 1.8V */ + ret &= ~SDHCI_CAN_VDD_300; + break; + default: + ret = readl_relaxed(host->ioaddr + reg); + } + return ret; +} + +static const struct sdhci_ops sdhci_st_ops = { + .get_max_clock = sdhci_pltfm_clk_get_max_clock, + .set_clock = sdhci_set_clock, + .set_bus_width = sdhci_set_bus_width, + .read_l = sdhci_st_readl, + .reset = sdhci_reset, + .set_uhs_signaling = sdhci_st_set_uhs_signaling, +}; + +static const struct sdhci_pltfm_data sdhci_st_pdata = { + .ops = &sdhci_st_ops, + .quirks = SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC | + SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN | + SDHCI_QUIRK_NO_HISPD_BIT, + .quirks2 = SDHCI_QUIRK2_PRESET_VALUE_BROKEN | + SDHCI_QUIRK2_STOP_WITH_TC, +}; + + +static int sdhci_st_probe(struct platform_device *pdev) +{ + struct device_node *np = pdev->dev.of_node; + struct sdhci_host *host; + struct st_mmc_platform_data *pdata; + struct sdhci_pltfm_host *pltfm_host; + struct clk *clk; + int ret = 0; + u16 host_version; + struct resource *res; + + pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL); + if (!pdata) + return -ENOMEM; + + clk = devm_clk_get(&pdev->dev, "mmc"); + if (IS_ERR(clk)) { + dev_err(&pdev->dev, "Peripheral clk not found\n"); + return PTR_ERR(clk); + } + + pdata->rstc = devm_reset_control_get(&pdev->dev, NULL); + if (IS_ERR(pdata->rstc)) + pdata->rstc = NULL; + else + reset_control_deassert(pdata->rstc); + + host = sdhci_pltfm_init(pdev, &sdhci_st_pdata, 0); + if (IS_ERR(host)) { + dev_err(&pdev->dev, "Failed sdhci_pltfm_init\n"); + ret = PTR_ERR(host); + goto err_pltfm_init; + } + + ret = mmc_of_parse(host->mmc); + if (ret) { + dev_err(&pdev->dev, "Failed mmc_of_parse\n"); + goto err_of; + } + + clk_prepare_enable(clk); + + /* Configure the FlashSS Top registers for setting eMMC TX/RX delay */ + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, + "top-mmc-delay"); + pdata->top_ioaddr = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(pdata->top_ioaddr)) { + dev_warn(&pdev->dev, "FlashSS Top Dly registers not available"); + pdata->top_ioaddr = NULL; + } + + pltfm_host = sdhci_priv(host); + pltfm_host->priv = pdata; + pltfm_host->clk = clk; + + /* Configure the Arasan HC inside the flashSS */ + st_mmcss_cconfig(np, host); + + ret = sdhci_add_host(host); + if (ret) { + dev_err(&pdev->dev, "Failed sdhci_add_host\n"); + goto err_out; + } + + platform_set_drvdata(pdev, host); + + host_version = readw_relaxed((host->ioaddr + SDHCI_HOST_VERSION)); + + dev_info(&pdev->dev, "SDHCI ST Initialised: Host Version: 0x%x Vendor Version 0x%x\n", + ((host_version & SDHCI_SPEC_VER_MASK) >> SDHCI_SPEC_VER_SHIFT), + ((host_version & SDHCI_VENDOR_VER_MASK) >> + SDHCI_VENDOR_VER_SHIFT)); + + return 0; + +err_out: + clk_disable_unprepare(clk); +err_of: + sdhci_pltfm_free(pdev); +err_pltfm_init: + if (pdata->rstc) + reset_control_assert(pdata->rstc); + + return ret; +} + +static int sdhci_st_remove(struct platform_device *pdev) +{ + struct sdhci_host *host = platform_get_drvdata(pdev); + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); + struct st_mmc_platform_data *pdata = pltfm_host->priv; + int ret; + + ret = sdhci_pltfm_unregister(pdev); + + if (pdata->rstc) + reset_control_assert(pdata->rstc); + + return ret; +} + +#ifdef CONFIG_PM_SLEEP +static int sdhci_st_suspend(struct device *dev) +{ + struct sdhci_host *host = dev_get_drvdata(dev); + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); + struct st_mmc_platform_data *pdata = pltfm_host->priv; + int ret = sdhci_suspend_host(host); + + if (ret) + goto out; + + if (pdata->rstc) + reset_control_assert(pdata->rstc); + + clk_disable_unprepare(pltfm_host->clk); +out: + return ret; +} + +static int sdhci_st_resume(struct device *dev) +{ + struct sdhci_host *host = dev_get_drvdata(dev); + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); + struct st_mmc_platform_data *pdata = pltfm_host->priv; + struct device_node *np = dev->of_node; + + clk_prepare_enable(pltfm_host->clk); + + if (pdata->rstc) + reset_control_deassert(pdata->rstc); + + st_mmcss_cconfig(np, host); + + return sdhci_resume_host(host); +} +#endif + +static SIMPLE_DEV_PM_OPS(sdhci_st_pmops, sdhci_st_suspend, sdhci_st_resume); + +static const struct of_device_id st_sdhci_match[] = { + { .compatible = "st,sdhci" }, + {}, +}; + +MODULE_DEVICE_TABLE(of, st_sdhci_match); + +static struct platform_driver sdhci_st_driver = { + .probe = sdhci_st_probe, + .remove = sdhci_st_remove, + .driver = { + .name = "sdhci-st", + .pm = &sdhci_st_pmops, + .of_match_table = of_match_ptr(st_sdhci_match), + }, +}; + +module_platform_driver(sdhci_st_driver); + +MODULE_DESCRIPTION("SDHCI driver for STMicroelectronics SoCs"); +MODULE_AUTHOR("Giuseppe Cavallaro <peppe.cavallaro@st.com>"); +MODULE_LICENSE("GPL v2"); +MODULE_ALIAS("platform:st-sdhci"); |