diff options
Diffstat (limited to 'kernel/drivers/mmc/host/mmci.h')
| -rw-r--r-- | kernel/drivers/mmc/host/mmci.h | 247 |
1 files changed, 247 insertions, 0 deletions
diff --git a/kernel/drivers/mmc/host/mmci.h b/kernel/drivers/mmc/host/mmci.h new file mode 100644 index 000000000..a1f5e4f49 --- /dev/null +++ b/kernel/drivers/mmc/host/mmci.h @@ -0,0 +1,247 @@ +/* + * linux/drivers/mmc/host/mmci.h - ARM PrimeCell MMCI PL180/1 driver + * + * Copyright (C) 2003 Deep Blue Solutions, Ltd, All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#define MMCIPOWER 0x000 +#define MCI_PWR_OFF 0x00 +#define MCI_PWR_UP 0x02 +#define MCI_PWR_ON 0x03 +#define MCI_OD (1 << 6) +#define MCI_ROD (1 << 7) +/* + * The ST Micro version does not have ROD and reuse the voltage registers for + * direction settings. + */ +#define MCI_ST_DATA2DIREN (1 << 2) +#define MCI_ST_CMDDIREN (1 << 3) +#define MCI_ST_DATA0DIREN (1 << 4) +#define MCI_ST_DATA31DIREN (1 << 5) +#define MCI_ST_FBCLKEN (1 << 7) +#define MCI_ST_DATA74DIREN (1 << 8) + +#define MMCICLOCK 0x004 +#define MCI_CLK_ENABLE (1 << 8) +#define MCI_CLK_PWRSAVE (1 << 9) +#define MCI_CLK_BYPASS (1 << 10) +#define MCI_4BIT_BUS (1 << 11) +/* + * 8bit wide buses, hardware flow contronl, negative edges and clock inversion + * supported in ST Micro U300 and Ux500 versions + */ +#define MCI_ST_8BIT_BUS (1 << 12) +#define MCI_ST_U300_HWFCEN (1 << 13) +#define MCI_ST_UX500_NEG_EDGE (1 << 13) +#define MCI_ST_UX500_HWFCEN (1 << 14) +#define MCI_ST_UX500_CLK_INV (1 << 15) +/* Modified PL180 on Versatile Express platform */ +#define MCI_ARM_HWFCEN (1 << 12) + +/* Modified on Qualcomm Integrations */ +#define MCI_QCOM_CLK_WIDEBUS_8 (BIT(10) | BIT(11)) +#define MCI_QCOM_CLK_FLOWENA BIT(12) +#define MCI_QCOM_CLK_INVERTOUT BIT(13) + +/* select in latch data and command in */ +#define MCI_QCOM_CLK_SELECT_IN_FBCLK BIT(15) +#define MCI_QCOM_CLK_SELECT_IN_DDR_MODE (BIT(14) | BIT(15)) + +#define MMCIARGUMENT 0x008 +#define MMCICOMMAND 0x00c +#define MCI_CPSM_RESPONSE (1 << 6) +#define MCI_CPSM_LONGRSP (1 << 7) +#define MCI_CPSM_INTERRUPT (1 << 8) +#define MCI_CPSM_PENDING (1 << 9) +#define MCI_CPSM_ENABLE (1 << 10) +/* Argument flag extenstions in the ST Micro versions */ +#define MCI_ST_SDIO_SUSP (1 << 11) +#define MCI_ST_ENCMD_COMPL (1 << 12) +#define MCI_ST_NIEN (1 << 13) +#define MCI_ST_CE_ATACMD (1 << 14) + +/* Modified on Qualcomm Integrations */ +#define MCI_QCOM_CSPM_DATCMD BIT(12) +#define MCI_QCOM_CSPM_MCIABORT BIT(13) +#define MCI_QCOM_CSPM_CCSENABLE BIT(14) +#define MCI_QCOM_CSPM_CCSDISABLE BIT(15) +#define MCI_QCOM_CSPM_AUTO_CMD19 BIT(16) +#define MCI_QCOM_CSPM_AUTO_CMD21 BIT(21) + +#define MMCIRESPCMD 0x010 +#define MMCIRESPONSE0 0x014 +#define MMCIRESPONSE1 0x018 +#define MMCIRESPONSE2 0x01c +#define MMCIRESPONSE3 0x020 +#define MMCIDATATIMER 0x024 +#define MMCIDATALENGTH 0x028 +#define MMCIDATACTRL 0x02c +#define MCI_DPSM_ENABLE (1 << 0) +#define MCI_DPSM_DIRECTION (1 << 1) +#define MCI_DPSM_MODE (1 << 2) +#define MCI_DPSM_DMAENABLE (1 << 3) +#define MCI_DPSM_BLOCKSIZE (1 << 4) +/* Control register extensions in the ST Micro U300 and Ux500 versions */ +#define MCI_ST_DPSM_RWSTART (1 << 8) +#define MCI_ST_DPSM_RWSTOP (1 << 9) +#define MCI_ST_DPSM_RWMOD (1 << 10) +#define MCI_ST_DPSM_SDIOEN (1 << 11) +/* Control register extensions in the ST Micro Ux500 versions */ +#define MCI_ST_DPSM_DMAREQCTL (1 << 12) +#define MCI_ST_DPSM_DBOOTMODEEN (1 << 13) +#define MCI_ST_DPSM_BUSYMODE (1 << 14) +#define MCI_ST_DPSM_DDRMODE (1 << 15) + +#define MMCIDATACNT 0x030 +#define MMCISTATUS 0x034 +#define MCI_CMDCRCFAIL (1 << 0) +#define MCI_DATACRCFAIL (1 << 1) +#define MCI_CMDTIMEOUT (1 << 2) +#define MCI_DATATIMEOUT (1 << 3) +#define MCI_TXUNDERRUN (1 << 4) +#define MCI_RXOVERRUN (1 << 5) +#define MCI_CMDRESPEND (1 << 6) +#define MCI_CMDSENT (1 << 7) +#define MCI_DATAEND (1 << 8) +#define MCI_STARTBITERR (1 << 9) +#define MCI_DATABLOCKEND (1 << 10) +#define MCI_CMDACTIVE (1 << 11) +#define MCI_TXACTIVE (1 << 12) +#define MCI_RXACTIVE (1 << 13) +#define MCI_TXFIFOHALFEMPTY (1 << 14) +#define MCI_RXFIFOHALFFULL (1 << 15) +#define MCI_TXFIFOFULL (1 << 16) +#define MCI_RXFIFOFULL (1 << 17) +#define MCI_TXFIFOEMPTY (1 << 18) +#define MCI_RXFIFOEMPTY (1 << 19) +#define MCI_TXDATAAVLBL (1 << 20) +#define MCI_RXDATAAVLBL (1 << 21) +/* Extended status bits for the ST Micro variants */ +#define MCI_ST_SDIOIT (1 << 22) +#define MCI_ST_CEATAEND (1 << 23) +#define MCI_ST_CARDBUSY (1 << 24) + +#define MMCICLEAR 0x038 +#define MCI_CMDCRCFAILCLR (1 << 0) +#define MCI_DATACRCFAILCLR (1 << 1) +#define MCI_CMDTIMEOUTCLR (1 << 2) +#define MCI_DATATIMEOUTCLR (1 << 3) +#define MCI_TXUNDERRUNCLR (1 << 4) +#define MCI_RXOVERRUNCLR (1 << 5) +#define MCI_CMDRESPENDCLR (1 << 6) +#define MCI_CMDSENTCLR (1 << 7) +#define MCI_DATAENDCLR (1 << 8) +#define MCI_STARTBITERRCLR (1 << 9) +#define MCI_DATABLOCKENDCLR (1 << 10) +/* Extended status bits for the ST Micro variants */ +#define MCI_ST_SDIOITC (1 << 22) +#define MCI_ST_CEATAENDC (1 << 23) +#define MCI_ST_BUSYENDC (1 << 24) + +#define MMCIMASK0 0x03c +#define MCI_CMDCRCFAILMASK (1 << 0) +#define MCI_DATACRCFAILMASK (1 << 1) +#define MCI_CMDTIMEOUTMASK (1 << 2) +#define MCI_DATATIMEOUTMASK (1 << 3) +#define MCI_TXUNDERRUNMASK (1 << 4) +#define MCI_RXOVERRUNMASK (1 << 5) +#define MCI_CMDRESPENDMASK (1 << 6) +#define MCI_CMDSENTMASK (1 << 7) +#define MCI_DATAENDMASK (1 << 8) +#define MCI_STARTBITERRMASK (1 << 9) +#define MCI_DATABLOCKENDMASK (1 << 10) +#define MCI_CMDACTIVEMASK (1 << 11) +#define MCI_TXACTIVEMASK (1 << 12) +#define MCI_RXACTIVEMASK (1 << 13) +#define MCI_TXFIFOHALFEMPTYMASK (1 << 14) +#define MCI_RXFIFOHALFFULLMASK (1 << 15) +#define MCI_TXFIFOFULLMASK (1 << 16) +#define MCI_RXFIFOFULLMASK (1 << 17) +#define MCI_TXFIFOEMPTYMASK (1 << 18) +#define MCI_RXFIFOEMPTYMASK (1 << 19) +#define MCI_TXDATAAVLBLMASK (1 << 20) +#define MCI_RXDATAAVLBLMASK (1 << 21) +/* Extended status bits for the ST Micro variants */ +#define MCI_ST_SDIOITMASK (1 << 22) +#define MCI_ST_CEATAENDMASK (1 << 23) +#define MCI_ST_BUSYEND (1 << 24) + +#define MMCIMASK1 0x040 +#define MMCIFIFOCNT 0x048 +#define MMCIFIFO 0x080 /* to 0x0bc */ + +#define MCI_IRQENABLE \ + (MCI_CMDCRCFAILMASK|MCI_DATACRCFAILMASK|MCI_CMDTIMEOUTMASK| \ + MCI_DATATIMEOUTMASK|MCI_TXUNDERRUNMASK|MCI_RXOVERRUNMASK| \ + MCI_CMDRESPENDMASK|MCI_CMDSENTMASK|MCI_STARTBITERRMASK) + +/* These interrupts are directed to IRQ1 when two IRQ lines are available */ +#define MCI_IRQ1MASK \ + (MCI_RXFIFOHALFFULLMASK | MCI_RXDATAAVLBLMASK | \ + MCI_TXFIFOHALFEMPTYMASK) + +#define NR_SG 128 + +struct clk; +struct variant_data; +struct dma_chan; + +struct mmci_host_next { + struct dma_async_tx_descriptor *dma_desc; + struct dma_chan *dma_chan; + s32 cookie; +}; + +struct mmci_host { + phys_addr_t phybase; + void __iomem *base; + struct mmc_request *mrq; + struct mmc_command *cmd; + struct mmc_data *data; + struct mmc_host *mmc; + struct clk *clk; + bool singleirq; + + spinlock_t lock; + + unsigned int mclk; + /* cached value of requested clk in set_ios */ + unsigned int clock_cache; + unsigned int cclk; + u32 pwr_reg; + u32 pwr_reg_add; + u32 clk_reg; + u32 datactrl_reg; + u32 busy_status; + bool vqmmc_enabled; + struct mmci_platform_data *plat; + struct variant_data *variant; + + u8 hw_designer; + u8 hw_revision:4; + + struct timer_list timer; + unsigned int oldstat; + + /* pio stuff */ + struct sg_mapping_iter sg_miter; + unsigned int size; + int (*get_rx_fifocnt)(struct mmci_host *h, u32 status, int remain); + +#ifdef CONFIG_DMA_ENGINE + /* DMA stuff */ + struct dma_chan *dma_current; + struct dma_chan *dma_rx_channel; + struct dma_chan *dma_tx_channel; + struct dma_async_tx_descriptor *dma_desc_current; + struct mmci_host_next next_data; + +#define dma_inprogress(host) ((host)->dma_current) +#else +#define dma_inprogress(host) (0) +#endif +}; + |