diff options
Diffstat (limited to 'kernel/drivers/mfd/sm501.c')
| -rw-r--r-- | kernel/drivers/mfd/sm501.c | 1751 |
1 files changed, 1751 insertions, 0 deletions
diff --git a/kernel/drivers/mfd/sm501.c b/kernel/drivers/mfd/sm501.c new file mode 100644 index 000000000..91077efc8 --- /dev/null +++ b/kernel/drivers/mfd/sm501.c @@ -0,0 +1,1751 @@ +/* linux/drivers/mfd/sm501.c + * + * Copyright (C) 2006 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * Vincent Sanders <vince@simtec.co.uk> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * SM501 MFD driver +*/ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/delay.h> +#include <linux/init.h> +#include <linux/list.h> +#include <linux/device.h> +#include <linux/platform_device.h> +#include <linux/pci.h> +#include <linux/i2c-gpio.h> +#include <linux/slab.h> + +#include <linux/sm501.h> +#include <linux/sm501-regs.h> +#include <linux/serial_8250.h> + +#include <linux/io.h> + +struct sm501_device { + struct list_head list; + struct platform_device pdev; +}; + +struct sm501_gpio; + +#ifdef CONFIG_MFD_SM501_GPIO +#include <linux/gpio.h> + +struct sm501_gpio_chip { + struct gpio_chip gpio; + struct sm501_gpio *ourgpio; /* to get back to parent. */ + void __iomem *regbase; + void __iomem *control; /* address of control reg. */ +}; + +struct sm501_gpio { + struct sm501_gpio_chip low; + struct sm501_gpio_chip high; + spinlock_t lock; + + unsigned int registered : 1; + void __iomem *regs; + struct resource *regs_res; +}; +#else +struct sm501_gpio { + /* no gpio support, empty definition for sm501_devdata. */ +}; +#endif + +struct sm501_devdata { + spinlock_t reg_lock; + struct mutex clock_lock; + struct list_head devices; + struct sm501_gpio gpio; + + struct device *dev; + struct resource *io_res; + struct resource *mem_res; + struct resource *regs_claim; + struct sm501_platdata *platdata; + + + unsigned int in_suspend; + unsigned long pm_misc; + + int unit_power[20]; + unsigned int pdev_id; + unsigned int irq; + void __iomem *regs; + unsigned int rev; +}; + + +#define MHZ (1000 * 1000) + +#ifdef DEBUG +static const unsigned int div_tab[] = { + [0] = 1, + [1] = 2, + [2] = 4, + [3] = 8, + [4] = 16, + [5] = 32, + [6] = 64, + [7] = 128, + [8] = 3, + [9] = 6, + [10] = 12, + [11] = 24, + [12] = 48, + [13] = 96, + [14] = 192, + [15] = 384, + [16] = 5, + [17] = 10, + [18] = 20, + [19] = 40, + [20] = 80, + [21] = 160, + [22] = 320, + [23] = 604, +}; + +static unsigned long decode_div(unsigned long pll2, unsigned long val, + unsigned int lshft, unsigned int selbit, + unsigned long mask) +{ + if (val & selbit) + pll2 = 288 * MHZ; + + return pll2 / div_tab[(val >> lshft) & mask]; +} + +#define fmt_freq(x) ((x) / MHZ), ((x) % MHZ), (x) + +/* sm501_dump_clk + * + * Print out the current clock configuration for the device +*/ + +static void sm501_dump_clk(struct sm501_devdata *sm) +{ + unsigned long misct = smc501_readl(sm->regs + SM501_MISC_TIMING); + unsigned long pm0 = smc501_readl(sm->regs + SM501_POWER_MODE_0_CLOCK); + unsigned long pm1 = smc501_readl(sm->regs + SM501_POWER_MODE_1_CLOCK); + unsigned long pmc = smc501_readl(sm->regs + SM501_POWER_MODE_CONTROL); + unsigned long sdclk0, sdclk1; + unsigned long pll2 = 0; + + switch (misct & 0x30) { + case 0x00: + pll2 = 336 * MHZ; + break; + case 0x10: + pll2 = 288 * MHZ; + break; + case 0x20: + pll2 = 240 * MHZ; + break; + case 0x30: + pll2 = 192 * MHZ; + break; + } + + sdclk0 = (misct & (1<<12)) ? pll2 : 288 * MHZ; + sdclk0 /= div_tab[((misct >> 8) & 0xf)]; + + sdclk1 = (misct & (1<<20)) ? pll2 : 288 * MHZ; + sdclk1 /= div_tab[((misct >> 16) & 0xf)]; + + dev_dbg(sm->dev, "MISCT=%08lx, PM0=%08lx, PM1=%08lx\n", + misct, pm0, pm1); + + dev_dbg(sm->dev, "PLL2 = %ld.%ld MHz (%ld), SDCLK0=%08lx, SDCLK1=%08lx\n", + fmt_freq(pll2), sdclk0, sdclk1); + + dev_dbg(sm->dev, "SDRAM: PM0=%ld, PM1=%ld\n", sdclk0, sdclk1); + + dev_dbg(sm->dev, "PM0[%c]: " + "P2 %ld.%ld MHz (%ld), V2 %ld.%ld (%ld), " + "M %ld.%ld (%ld), MX1 %ld.%ld (%ld)\n", + (pmc & 3 ) == 0 ? '*' : '-', + fmt_freq(decode_div(pll2, pm0, 24, 1<<29, 31)), + fmt_freq(decode_div(pll2, pm0, 16, 1<<20, 15)), + fmt_freq(decode_div(pll2, pm0, 8, 1<<12, 15)), + fmt_freq(decode_div(pll2, pm0, 0, 1<<4, 15))); + + dev_dbg(sm->dev, "PM1[%c]: " + "P2 %ld.%ld MHz (%ld), V2 %ld.%ld (%ld), " + "M %ld.%ld (%ld), MX1 %ld.%ld (%ld)\n", + (pmc & 3 ) == 1 ? '*' : '-', + fmt_freq(decode_div(pll2, pm1, 24, 1<<29, 31)), + fmt_freq(decode_div(pll2, pm1, 16, 1<<20, 15)), + fmt_freq(decode_div(pll2, pm1, 8, 1<<12, 15)), + fmt_freq(decode_div(pll2, pm1, 0, 1<<4, 15))); +} + +static void sm501_dump_regs(struct sm501_devdata *sm) +{ + void __iomem *regs = sm->regs; + + dev_info(sm->dev, "System Control %08x\n", + smc501_readl(regs + SM501_SYSTEM_CONTROL)); + dev_info(sm->dev, "Misc Control %08x\n", + smc501_readl(regs + SM501_MISC_CONTROL)); + dev_info(sm->dev, "GPIO Control Low %08x\n", + smc501_readl(regs + SM501_GPIO31_0_CONTROL)); + dev_info(sm->dev, "GPIO Control Hi %08x\n", + smc501_readl(regs + SM501_GPIO63_32_CONTROL)); + dev_info(sm->dev, "DRAM Control %08x\n", + smc501_readl(regs + SM501_DRAM_CONTROL)); + dev_info(sm->dev, "Arbitration Ctrl %08x\n", + smc501_readl(regs + SM501_ARBTRTN_CONTROL)); + dev_info(sm->dev, "Misc Timing %08x\n", + smc501_readl(regs + SM501_MISC_TIMING)); +} + +static void sm501_dump_gate(struct sm501_devdata *sm) +{ + dev_info(sm->dev, "CurrentGate %08x\n", + smc501_readl(sm->regs + SM501_CURRENT_GATE)); + dev_info(sm->dev, "CurrentClock %08x\n", + smc501_readl(sm->regs + SM501_CURRENT_CLOCK)); + dev_info(sm->dev, "PowerModeControl %08x\n", + smc501_readl(sm->regs + SM501_POWER_MODE_CONTROL)); +} + +#else +static inline void sm501_dump_gate(struct sm501_devdata *sm) { } +static inline void sm501_dump_regs(struct sm501_devdata *sm) { } +static inline void sm501_dump_clk(struct sm501_devdata *sm) { } +#endif + +/* sm501_sync_regs + * + * ensure the +*/ + +static void sm501_sync_regs(struct sm501_devdata *sm) +{ + smc501_readl(sm->regs); +} + +static inline void sm501_mdelay(struct sm501_devdata *sm, unsigned int delay) +{ + /* during suspend/resume, we are currently not allowed to sleep, + * so change to using mdelay() instead of msleep() if we + * are in one of these paths */ + + if (sm->in_suspend) + mdelay(delay); + else + msleep(delay); +} + +/* sm501_misc_control + * + * alters the miscellaneous control parameters +*/ + +int sm501_misc_control(struct device *dev, + unsigned long set, unsigned long clear) +{ + struct sm501_devdata *sm = dev_get_drvdata(dev); + unsigned long misc; + unsigned long save; + unsigned long to; + + spin_lock_irqsave(&sm->reg_lock, save); + + misc = smc501_readl(sm->regs + SM501_MISC_CONTROL); + to = (misc & ~clear) | set; + + if (to != misc) { + smc501_writel(to, sm->regs + SM501_MISC_CONTROL); + sm501_sync_regs(sm); + + dev_dbg(sm->dev, "MISC_CONTROL %08lx\n", misc); + } + + spin_unlock_irqrestore(&sm->reg_lock, save); + return to; +} + +EXPORT_SYMBOL_GPL(sm501_misc_control); + +/* sm501_modify_reg + * + * Modify a register in the SM501 which may be shared with other + * drivers. +*/ + +unsigned long sm501_modify_reg(struct device *dev, + unsigned long reg, + unsigned long set, + unsigned long clear) +{ + struct sm501_devdata *sm = dev_get_drvdata(dev); + unsigned long data; + unsigned long save; + + spin_lock_irqsave(&sm->reg_lock, save); + + data = smc501_readl(sm->regs + reg); + data |= set; + data &= ~clear; + + smc501_writel(data, sm->regs + reg); + sm501_sync_regs(sm); + + spin_unlock_irqrestore(&sm->reg_lock, save); + + return data; +} + +EXPORT_SYMBOL_GPL(sm501_modify_reg); + +/* sm501_unit_power + * + * alters the power active gate to set specific units on or off + */ + +int sm501_unit_power(struct device *dev, unsigned int unit, unsigned int to) +{ + struct sm501_devdata *sm = dev_get_drvdata(dev); + unsigned long mode; + unsigned long gate; + unsigned long clock; + + mutex_lock(&sm->clock_lock); + + mode = smc501_readl(sm->regs + SM501_POWER_MODE_CONTROL); + gate = smc501_readl(sm->regs + SM501_CURRENT_GATE); + clock = smc501_readl(sm->regs + SM501_CURRENT_CLOCK); + + mode &= 3; /* get current power mode */ + + if (unit >= ARRAY_SIZE(sm->unit_power)) { + dev_err(dev, "%s: bad unit %d\n", __func__, unit); + goto already; + } + + dev_dbg(sm->dev, "%s: unit %d, cur %d, to %d\n", __func__, unit, + sm->unit_power[unit], to); + + if (to == 0 && sm->unit_power[unit] == 0) { + dev_err(sm->dev, "unit %d is already shutdown\n", unit); + goto already; + } + + sm->unit_power[unit] += to ? 1 : -1; + to = sm->unit_power[unit] ? 1 : 0; + + if (to) { + if (gate & (1 << unit)) + goto already; + gate |= (1 << unit); + } else { + if (!(gate & (1 << unit))) + goto already; + gate &= ~(1 << unit); + } + + switch (mode) { + case 1: + smc501_writel(gate, sm->regs + SM501_POWER_MODE_0_GATE); + smc501_writel(clock, sm->regs + SM501_POWER_MODE_0_CLOCK); + mode = 0; + break; + case 2: + case 0: + smc501_writel(gate, sm->regs + SM501_POWER_MODE_1_GATE); + smc501_writel(clock, sm->regs + SM501_POWER_MODE_1_CLOCK); + mode = 1; + break; + + default: + gate = -1; + goto already; + } + + smc501_writel(mode, sm->regs + SM501_POWER_MODE_CONTROL); + sm501_sync_regs(sm); + + dev_dbg(sm->dev, "gate %08lx, clock %08lx, mode %08lx\n", + gate, clock, mode); + + sm501_mdelay(sm, 16); + + already: + mutex_unlock(&sm->clock_lock); + return gate; +} + +EXPORT_SYMBOL_GPL(sm501_unit_power); + +/* clock value structure. */ +struct sm501_clock { + unsigned long mclk; + int divider; + int shift; + unsigned int m, n, k; +}; + +/* sm501_calc_clock + * + * Calculates the nearest discrete clock frequency that + * can be achieved with the specified input clock. + * the maximum divisor is 3 or 5 + */ + +static int sm501_calc_clock(unsigned long freq, + struct sm501_clock *clock, + int max_div, + unsigned long mclk, + long *best_diff) +{ + int ret = 0; + int divider; + int shift; + long diff; + + /* try dividers 1 and 3 for CRT and for panel, + try divider 5 for panel only.*/ + + for (divider = 1; divider <= max_div; divider += 2) { + /* try all 8 shift values.*/ + for (shift = 0; shift < 8; shift++) { + /* Calculate difference to requested clock */ + diff = DIV_ROUND_CLOSEST(mclk, divider << shift) - freq; + if (diff < 0) + diff = -diff; + + /* If it is less than the current, use it */ + if (diff < *best_diff) { + *best_diff = diff; + + clock->mclk = mclk; + clock->divider = divider; + clock->shift = shift; + ret = 1; + } + } + } + + return ret; +} + +/* sm501_calc_pll + * + * Calculates the nearest discrete clock frequency that can be + * achieved using the programmable PLL. + * the maximum divisor is 3 or 5 + */ + +static unsigned long sm501_calc_pll(unsigned long freq, + struct sm501_clock *clock, + int max_div) +{ + unsigned long mclk; + unsigned int m, n, k; + long best_diff = 999999999; + + /* + * The SM502 datasheet doesn't specify the min/max values for M and N. + * N = 1 at least doesn't work in practice. + */ + for (m = 2; m <= 255; m++) { + for (n = 2; n <= 127; n++) { + for (k = 0; k <= 1; k++) { + mclk = (24000000UL * m / n) >> k; + + if (sm501_calc_clock(freq, clock, max_div, + mclk, &best_diff)) { + clock->m = m; + clock->n = n; + clock->k = k; + } + } + } + } + + /* Return best clock. */ + return clock->mclk / (clock->divider << clock->shift); +} + +/* sm501_select_clock + * + * Calculates the nearest discrete clock frequency that can be + * achieved using the 288MHz and 336MHz PLLs. + * the maximum divisor is 3 or 5 + */ + +static unsigned long sm501_select_clock(unsigned long freq, + struct sm501_clock *clock, + int max_div) +{ + unsigned long mclk; + long best_diff = 999999999; + + /* Try 288MHz and 336MHz clocks. */ + for (mclk = 288000000; mclk <= 336000000; mclk += 48000000) { + sm501_calc_clock(freq, clock, max_div, mclk, &best_diff); + } + + /* Return best clock. */ + return clock->mclk / (clock->divider << clock->shift); +} + +/* sm501_set_clock + * + * set one of the four clock sources to the closest available frequency to + * the one specified +*/ + +unsigned long sm501_set_clock(struct device *dev, + int clksrc, + unsigned long req_freq) +{ + struct sm501_devdata *sm = dev_get_drvdata(dev); + unsigned long mode = smc501_readl(sm->regs + SM501_POWER_MODE_CONTROL); + unsigned long gate = smc501_readl(sm->regs + SM501_CURRENT_GATE); + unsigned long clock = smc501_readl(sm->regs + SM501_CURRENT_CLOCK); + unsigned int pll_reg = 0; + unsigned long sm501_freq; /* the actual frequency achieved */ + u64 reg; + + struct sm501_clock to; + + /* find achivable discrete frequency and setup register value + * accordingly, V2XCLK, MCLK and M1XCLK are the same P2XCLK + * has an extra bit for the divider */ + + switch (clksrc) { + case SM501_CLOCK_P2XCLK: + /* This clock is divided in half so to achieve the + * requested frequency the value must be multiplied by + * 2. This clock also has an additional pre divisor */ + + if (sm->rev >= 0xC0) { + /* SM502 -> use the programmable PLL */ + sm501_freq = (sm501_calc_pll(2 * req_freq, + &to, 5) / 2); + reg = to.shift & 0x07;/* bottom 3 bits are shift */ + if (to.divider == 3) + reg |= 0x08; /* /3 divider required */ + else if (to.divider == 5) + reg |= 0x10; /* /5 divider required */ + reg |= 0x40; /* select the programmable PLL */ + pll_reg = 0x20000 | (to.k << 15) | (to.n << 8) | to.m; + } else { + sm501_freq = (sm501_select_clock(2 * req_freq, + &to, 5) / 2); + reg = to.shift & 0x07;/* bottom 3 bits are shift */ + if (to.divider == 3) + reg |= 0x08; /* /3 divider required */ + else if (to.divider == 5) + reg |= 0x10; /* /5 divider required */ + if (to.mclk != 288000000) + reg |= 0x20; /* which mclk pll is source */ + } + break; + + case SM501_CLOCK_V2XCLK: + /* This clock is divided in half so to achieve the + * requested frequency the value must be multiplied by 2. */ + + sm501_freq = (sm501_select_clock(2 * req_freq, &to, 3) / 2); + reg=to.shift & 0x07; /* bottom 3 bits are shift */ + if (to.divider == 3) + reg |= 0x08; /* /3 divider required */ + if (to.mclk != 288000000) + reg |= 0x10; /* which mclk pll is source */ + break; + + case SM501_CLOCK_MCLK: + case SM501_CLOCK_M1XCLK: + /* These clocks are the same and not further divided */ + + sm501_freq = sm501_select_clock( req_freq, &to, 3); + reg=to.shift & 0x07; /* bottom 3 bits are shift */ + if (to.divider == 3) + reg |= 0x08; /* /3 divider required */ + if (to.mclk != 288000000) + reg |= 0x10; /* which mclk pll is source */ + break; + + default: + return 0; /* this is bad */ + } + + mutex_lock(&sm->clock_lock); + + mode = smc501_readl(sm->regs + SM501_POWER_MODE_CONTROL); + gate = smc501_readl(sm->regs + SM501_CURRENT_GATE); + clock = smc501_readl(sm->regs + SM501_CURRENT_CLOCK); + + clock = clock & ~(0xFF << clksrc); + clock |= reg<<clksrc; + + mode &= 3; /* find current mode */ + + switch (mode) { + case 1: + smc501_writel(gate, sm->regs + SM501_POWER_MODE_0_GATE); + smc501_writel(clock, sm->regs + SM501_POWER_MODE_0_CLOCK); + mode = 0; + break; + case 2: + case 0: + smc501_writel(gate, sm->regs + SM501_POWER_MODE_1_GATE); + smc501_writel(clock, sm->regs + SM501_POWER_MODE_1_CLOCK); + mode = 1; + break; + + default: + mutex_unlock(&sm->clock_lock); + return -1; + } + + smc501_writel(mode, sm->regs + SM501_POWER_MODE_CONTROL); + + if (pll_reg) + smc501_writel(pll_reg, + sm->regs + SM501_PROGRAMMABLE_PLL_CONTROL); + + sm501_sync_regs(sm); + + dev_dbg(sm->dev, "gate %08lx, clock %08lx, mode %08lx\n", + gate, clock, mode); + + sm501_mdelay(sm, 16); + mutex_unlock(&sm->clock_lock); + + sm501_dump_clk(sm); + + return sm501_freq; +} + +EXPORT_SYMBOL_GPL(sm501_set_clock); + +/* sm501_find_clock + * + * finds the closest available frequency for a given clock +*/ + +unsigned long sm501_find_clock(struct device *dev, + int clksrc, + unsigned long req_freq) +{ + struct sm501_devdata *sm = dev_get_drvdata(dev); + unsigned long sm501_freq; /* the frequency achieveable by the 501 */ + struct sm501_clock to; + + switch (clksrc) { + case SM501_CLOCK_P2XCLK: + if (sm->rev >= 0xC0) { + /* SM502 -> use the programmable PLL */ + sm501_freq = (sm501_calc_pll(2 * req_freq, + &to, 5) / 2); + } else { + sm501_freq = (sm501_select_clock(2 * req_freq, + &to, 5) / 2); + } + break; + + case SM501_CLOCK_V2XCLK: + sm501_freq = (sm501_select_clock(2 * req_freq, &to, 3) / 2); + break; + + case SM501_CLOCK_MCLK: + case SM501_CLOCK_M1XCLK: + sm501_freq = sm501_select_clock(req_freq, &to, 3); + break; + + default: + sm501_freq = 0; /* error */ + } + + return sm501_freq; +} + +EXPORT_SYMBOL_GPL(sm501_find_clock); + +static struct sm501_device *to_sm_device(struct platform_device *pdev) +{ + return container_of(pdev, struct sm501_device, pdev); +} + +/* sm501_device_release + * + * A release function for the platform devices we create to allow us to + * free any items we allocated +*/ + +static void sm501_device_release(struct device *dev) +{ + kfree(to_sm_device(to_platform_device(dev))); +} + +/* sm501_create_subdev + * + * Create a skeleton platform device with resources for passing to a + * sub-driver +*/ + +static struct platform_device * +sm501_create_subdev(struct sm501_devdata *sm, char *name, + unsigned int res_count, unsigned int platform_data_size) +{ + struct sm501_device *smdev; + + smdev = kzalloc(sizeof(struct sm501_device) + + (sizeof(struct resource) * res_count) + + platform_data_size, GFP_KERNEL); + if (!smdev) + return NULL; + + smdev->pdev.dev.release = sm501_device_release; + + smdev->pdev.name = name; + smdev->pdev.id = sm->pdev_id; + smdev->pdev.dev.parent = sm->dev; + + if (res_count) { + smdev->pdev.resource = (struct resource *)(smdev+1); + smdev->pdev.num_resources = res_count; + } + if (platform_data_size) + smdev->pdev.dev.platform_data = (void *)(smdev+1); + + return &smdev->pdev; +} + +/* sm501_register_device + * + * Register a platform device created with sm501_create_subdev() +*/ + +static int sm501_register_device(struct sm501_devdata *sm, + struct platform_device *pdev) +{ + struct sm501_device *smdev = to_sm_device(pdev); + int ptr; + int ret; + + for (ptr = 0; ptr < pdev->num_resources; ptr++) { + printk(KERN_DEBUG "%s[%d] %pR\n", + pdev->name, ptr, &pdev->resource[ptr]); + } + + ret = platform_device_register(pdev); + + if (ret >= 0) { + dev_dbg(sm->dev, "registered %s\n", pdev->name); + list_add_tail(&smdev->list, &sm->devices); + } else + dev_err(sm->dev, "error registering %s (%d)\n", + pdev->name, ret); + + return ret; +} + +/* sm501_create_subio + * + * Fill in an IO resource for a sub device +*/ + +static void sm501_create_subio(struct sm501_devdata *sm, + struct resource *res, + resource_size_t offs, + resource_size_t size) +{ + res->flags = IORESOURCE_MEM; + res->parent = sm->io_res; + res->start = sm->io_res->start + offs; + res->end = res->start + size - 1; +} + +/* sm501_create_mem + * + * Fill in an MEM resource for a sub device +*/ + +static void sm501_create_mem(struct sm501_devdata *sm, + struct resource *res, + resource_size_t *offs, + resource_size_t size) +{ + *offs -= size; /* adjust memory size */ + + res->flags = IORESOURCE_MEM; + res->parent = sm->mem_res; + res->start = sm->mem_res->start + *offs; + res->end = res->start + size - 1; +} + +/* sm501_create_irq + * + * Fill in an IRQ resource for a sub device +*/ + +static void sm501_create_irq(struct sm501_devdata *sm, + struct resource *res) +{ + res->flags = IORESOURCE_IRQ; + res->parent = NULL; + res->start = res->end = sm->irq; +} + +static int sm501_register_usbhost(struct sm501_devdata *sm, + resource_size_t *mem_avail) +{ + struct platform_device *pdev; + + pdev = sm501_create_subdev(sm, "sm501-usb", 3, 0); + if (!pdev) + return -ENOMEM; + + sm501_create_subio(sm, &pdev->resource[0], 0x40000, 0x20000); + sm501_create_mem(sm, &pdev->resource[1], mem_avail, 256*1024); + sm501_create_irq(sm, &pdev->resource[2]); + + return sm501_register_device(sm, pdev); +} + +static void sm501_setup_uart_data(struct sm501_devdata *sm, + struct plat_serial8250_port *uart_data, + unsigned int offset) +{ + uart_data->membase = sm->regs + offset; + uart_data->mapbase = sm->io_res->start + offset; + uart_data->iotype = UPIO_MEM; + uart_data->irq = sm->irq; + uart_data->flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_SHARE_IRQ; + uart_data->regshift = 2; + uart_data->uartclk = (9600 * 16); +} + +static int sm501_register_uart(struct sm501_devdata *sm, int devices) +{ + struct platform_device *pdev; + struct plat_serial8250_port *uart_data; + + pdev = sm501_create_subdev(sm, "serial8250", 0, + sizeof(struct plat_serial8250_port) * 3); + if (!pdev) + return -ENOMEM; + + uart_data = dev_get_platdata(&pdev->dev); + + if (devices & SM501_USE_UART0) { + sm501_setup_uart_data(sm, uart_data++, 0x30000); + sm501_unit_power(sm->dev, SM501_GATE_UART0, 1); + sm501_modify_reg(sm->dev, SM501_IRQ_MASK, 1 << 12, 0); + sm501_modify_reg(sm->dev, SM501_GPIO63_32_CONTROL, 0x01e0, 0); + } + if (devices & SM501_USE_UART1) { + sm501_setup_uart_data(sm, uart_data++, 0x30020); + sm501_unit_power(sm->dev, SM501_GATE_UART1, 1); + sm501_modify_reg(sm->dev, SM501_IRQ_MASK, 1 << 13, 0); + sm501_modify_reg(sm->dev, SM501_GPIO63_32_CONTROL, 0x1e00, 0); + } + + pdev->id = PLAT8250_DEV_SM501; + + return sm501_register_device(sm, pdev); +} + +static int sm501_register_display(struct sm501_devdata *sm, + resource_size_t *mem_avail) +{ + struct platform_device *pdev; + + pdev = sm501_create_subdev(sm, "sm501-fb", 4, 0); + if (!pdev) + return -ENOMEM; + + sm501_create_subio(sm, &pdev->resource[0], 0x80000, 0x10000); + sm501_create_subio(sm, &pdev->resource[1], 0x100000, 0x50000); + sm501_create_mem(sm, &pdev->resource[2], mem_avail, *mem_avail); + sm501_create_irq(sm, &pdev->resource[3]); + + return sm501_register_device(sm, pdev); +} + +#ifdef CONFIG_MFD_SM501_GPIO + +static inline struct sm501_gpio_chip *to_sm501_gpio(struct gpio_chip *gc) +{ + return container_of(gc, struct sm501_gpio_chip, gpio); +} + +static inline struct sm501_devdata *sm501_gpio_to_dev(struct sm501_gpio *gpio) +{ + return container_of(gpio, struct sm501_devdata, gpio); +} + +static int sm501_gpio_get(struct gpio_chip *chip, unsigned offset) + +{ + struct sm501_gpio_chip *smgpio = to_sm501_gpio(chip); + unsigned long result; + + result = smc501_readl(smgpio->regbase + SM501_GPIO_DATA_LOW); + result >>= offset; + + return result & 1UL; +} + +static void sm501_gpio_ensure_gpio(struct sm501_gpio_chip *smchip, + unsigned long bit) +{ + unsigned long ctrl; + + /* check and modify if this pin is not set as gpio. */ + + if (smc501_readl(smchip->control) & bit) { + dev_info(sm501_gpio_to_dev(smchip->ourgpio)->dev, + "changing mode of gpio, bit %08lx\n", bit); + + ctrl = smc501_readl(smchip->control); + ctrl &= ~bit; + smc501_writel(ctrl, smchip->control); + + sm501_sync_regs(sm501_gpio_to_dev(smchip->ourgpio)); + } +} + +static void sm501_gpio_set(struct gpio_chip *chip, unsigned offset, int value) + +{ + struct sm501_gpio_chip *smchip = to_sm501_gpio(chip); + struct sm501_gpio *smgpio = smchip->ourgpio; + unsigned long bit = 1 << offset; + void __iomem *regs = smchip->regbase; + unsigned long save; + unsigned long val; + + dev_dbg(sm501_gpio_to_dev(smgpio)->dev, "%s(%p,%d)\n", + __func__, chip, offset); + + spin_lock_irqsave(&smgpio->lock, save); + + val = smc501_readl(regs + SM501_GPIO_DATA_LOW) & ~bit; + if (value) + val |= bit; + smc501_writel(val, regs); + + sm501_sync_regs(sm501_gpio_to_dev(smgpio)); + sm501_gpio_ensure_gpio(smchip, bit); + + spin_unlock_irqrestore(&smgpio->lock, save); +} + +static int sm501_gpio_input(struct gpio_chip *chip, unsigned offset) +{ + struct sm501_gpio_chip *smchip = to_sm501_gpio(chip); + struct sm501_gpio *smgpio = smchip->ourgpio; + void __iomem *regs = smchip->regbase; + unsigned long bit = 1 << offset; + unsigned long save; + unsigned long ddr; + + dev_dbg(sm501_gpio_to_dev(smgpio)->dev, "%s(%p,%d)\n", + __func__, chip, offset); + + spin_lock_irqsave(&smgpio->lock, save); + + ddr = smc501_readl(regs + SM501_GPIO_DDR_LOW); + smc501_writel(ddr & ~bit, regs + SM501_GPIO_DDR_LOW); + + sm501_sync_regs(sm501_gpio_to_dev(smgpio)); + sm501_gpio_ensure_gpio(smchip, bit); + + spin_unlock_irqrestore(&smgpio->lock, save); + + return 0; +} + +static int sm501_gpio_output(struct gpio_chip *chip, + unsigned offset, int value) +{ + struct sm501_gpio_chip *smchip = to_sm501_gpio(chip); + struct sm501_gpio *smgpio = smchip->ourgpio; + unsigned long bit = 1 << offset; + void __iomem *regs = smchip->regbase; + unsigned long save; + unsigned long val; + unsigned long ddr; + + dev_dbg(sm501_gpio_to_dev(smgpio)->dev, "%s(%p,%d,%d)\n", + __func__, chip, offset, value); + + spin_lock_irqsave(&smgpio->lock, save); + + val = smc501_readl(regs + SM501_GPIO_DATA_LOW); + if (value) + val |= bit; + else + val &= ~bit; + smc501_writel(val, regs); + + ddr = smc501_readl(regs + SM501_GPIO_DDR_LOW); + smc501_writel(ddr | bit, regs + SM501_GPIO_DDR_LOW); + + sm501_sync_regs(sm501_gpio_to_dev(smgpio)); + smc501_writel(val, regs + SM501_GPIO_DATA_LOW); + + sm501_sync_regs(sm501_gpio_to_dev(smgpio)); + spin_unlock_irqrestore(&smgpio->lock, save); + + return 0; +} + +static struct gpio_chip gpio_chip_template = { + .ngpio = 32, + .direction_input = sm501_gpio_input, + .direction_output = sm501_gpio_output, + .set = sm501_gpio_set, + .get = sm501_gpio_get, +}; + +static int sm501_gpio_register_chip(struct sm501_devdata *sm, + struct sm501_gpio *gpio, + struct sm501_gpio_chip *chip) +{ + struct sm501_platdata *pdata = sm->platdata; + struct gpio_chip *gchip = &chip->gpio; + int base = pdata->gpio_base; + + chip->gpio = gpio_chip_template; + + if (chip == &gpio->high) { + if (base > 0) + base += 32; + chip->regbase = gpio->regs + SM501_GPIO_DATA_HIGH; + chip->control = sm->regs + SM501_GPIO63_32_CONTROL; + gchip->label = "SM501-HIGH"; + } else { + chip->regbase = gpio->regs + SM501_GPIO_DATA_LOW; + chip->control = sm->regs + SM501_GPIO31_0_CONTROL; + gchip->label = "SM501-LOW"; + } + + gchip->base = base; + chip->ourgpio = gpio; + + return gpiochip_add(gchip); +} + +static int sm501_register_gpio(struct sm501_devdata *sm) +{ + struct sm501_gpio *gpio = &sm->gpio; + resource_size_t iobase = sm->io_res->start + SM501_GPIO; + int ret; + + dev_dbg(sm->dev, "registering gpio block %08llx\n", + (unsigned long long)iobase); + + spin_lock_init(&gpio->lock); + + gpio->regs_res = request_mem_region(iobase, 0x20, "sm501-gpio"); + if (gpio->regs_res == NULL) { + dev_err(sm->dev, "gpio: failed to request region\n"); + return -ENXIO; + } + + gpio->regs = ioremap(iobase, 0x20); + if (gpio->regs == NULL) { + dev_err(sm->dev, "gpio: failed to remap registers\n"); + ret = -ENXIO; + goto err_claimed; + } + + /* Register both our chips. */ + + ret = sm501_gpio_register_chip(sm, gpio, &gpio->low); + if (ret) { + dev_err(sm->dev, "failed to add low chip\n"); + goto err_mapped; + } + + ret = sm501_gpio_register_chip(sm, gpio, &gpio->high); + if (ret) { + dev_err(sm->dev, "failed to add high chip\n"); + goto err_low_chip; + } + + gpio->registered = 1; + + return 0; + + err_low_chip: + gpiochip_remove(&gpio->low.gpio); + + err_mapped: + iounmap(gpio->regs); + + err_claimed: + release_resource(gpio->regs_res); + kfree(gpio->regs_res); + + return ret; +} + +static void sm501_gpio_remove(struct sm501_devdata *sm) +{ + struct sm501_gpio *gpio = &sm->gpio; + + if (!sm->gpio.registered) + return; + + gpiochip_remove(&gpio->low.gpio); + gpiochip_remove(&gpio->high.gpio); + + iounmap(gpio->regs); + release_resource(gpio->regs_res); + kfree(gpio->regs_res); +} + +static inline int sm501_gpio_pin2nr(struct sm501_devdata *sm, unsigned int pin) +{ + struct sm501_gpio *gpio = &sm->gpio; + int base = (pin < 32) ? gpio->low.gpio.base : gpio->high.gpio.base; + + return (pin % 32) + base; +} + +static inline int sm501_gpio_isregistered(struct sm501_devdata *sm) +{ + return sm->gpio.registered; +} +#else +static inline int sm501_register_gpio(struct sm501_devdata *sm) +{ + return 0; +} + +static inline void sm501_gpio_remove(struct sm501_devdata *sm) +{ +} + +static inline int sm501_gpio_pin2nr(struct sm501_devdata *sm, unsigned int pin) +{ + return -1; +} + +static inline int sm501_gpio_isregistered(struct sm501_devdata *sm) +{ + return 0; +} +#endif + +static int sm501_register_gpio_i2c_instance(struct sm501_devdata *sm, + struct sm501_platdata_gpio_i2c *iic) +{ + struct i2c_gpio_platform_data *icd; + struct platform_device *pdev; + + pdev = sm501_create_subdev(sm, "i2c-gpio", 0, + sizeof(struct i2c_gpio_platform_data)); + if (!pdev) + return -ENOMEM; + + icd = dev_get_platdata(&pdev->dev); + + /* We keep the pin_sda and pin_scl fields relative in case the + * same platform data is passed to >1 SM501. + */ + + icd->sda_pin = sm501_gpio_pin2nr(sm, iic->pin_sda); + icd->scl_pin = sm501_gpio_pin2nr(sm, iic->pin_scl); + icd->timeout = iic->timeout; + icd->udelay = iic->udelay; + + /* note, we can't use either of the pin numbers, as the i2c-gpio + * driver uses the platform.id field to generate the bus number + * to register with the i2c core; The i2c core doesn't have enough + * entries to deal with anything we currently use. + */ + + pdev->id = iic->bus_num; + + dev_info(sm->dev, "registering i2c-%d: sda=%d (%d), scl=%d (%d)\n", + iic->bus_num, + icd->sda_pin, iic->pin_sda, icd->scl_pin, iic->pin_scl); + + return sm501_register_device(sm, pdev); +} + +static int sm501_register_gpio_i2c(struct sm501_devdata *sm, + struct sm501_platdata *pdata) +{ + struct sm501_platdata_gpio_i2c *iic = pdata->gpio_i2c; + int index; + int ret; + + for (index = 0; index < pdata->gpio_i2c_nr; index++, iic++) { + ret = sm501_register_gpio_i2c_instance(sm, iic); + if (ret < 0) + return ret; + } + + return 0; +} + +/* sm501_dbg_regs + * + * Debug attribute to attach to parent device to show core registers +*/ + +static ssize_t sm501_dbg_regs(struct device *dev, + struct device_attribute *attr, char *buff) +{ + struct sm501_devdata *sm = dev_get_drvdata(dev) ; + unsigned int reg; + char *ptr = buff; + int ret; + + for (reg = 0x00; reg < 0x70; reg += 4) { + ret = sprintf(ptr, "%08x = %08x\n", + reg, smc501_readl(sm->regs + reg)); + ptr += ret; + } + + return ptr - buff; +} + + +static DEVICE_ATTR(dbg_regs, 0444, sm501_dbg_regs, NULL); + +/* sm501_init_reg + * + * Helper function for the init code to setup a register + * + * clear the bits which are set in r->mask, and then set + * the bits set in r->set. +*/ + +static inline void sm501_init_reg(struct sm501_devdata *sm, + unsigned long reg, + struct sm501_reg_init *r) +{ + unsigned long tmp; + + tmp = smc501_readl(sm->regs + reg); + tmp &= ~r->mask; + tmp |= r->set; + smc501_writel(tmp, sm->regs + reg); +} + +/* sm501_init_regs + * + * Setup core register values +*/ + +static void sm501_init_regs(struct sm501_devdata *sm, + struct sm501_initdata *init) +{ + sm501_misc_control(sm->dev, + init->misc_control.set, + init->misc_control.mask); + + sm501_init_reg(sm, SM501_MISC_TIMING, &init->misc_timing); + sm501_init_reg(sm, SM501_GPIO31_0_CONTROL, &init->gpio_low); + sm501_init_reg(sm, SM501_GPIO63_32_CONTROL, &init->gpio_high); + + if (init->m1xclk) { + dev_info(sm->dev, "setting M1XCLK to %ld\n", init->m1xclk); + sm501_set_clock(sm->dev, SM501_CLOCK_M1XCLK, init->m1xclk); + } + + if (init->mclk) { + dev_info(sm->dev, "setting MCLK to %ld\n", init->mclk); + sm501_set_clock(sm->dev, SM501_CLOCK_MCLK, init->mclk); + } + +} + +/* Check the PLL sources for the M1CLK and M1XCLK + * + * If the M1CLK and M1XCLKs are not sourced from the same PLL, then + * there is a risk (see errata AB-5) that the SM501 will cease proper + * function. If this happens, then it is likely the SM501 will + * hang the system. +*/ + +static int sm501_check_clocks(struct sm501_devdata *sm) +{ + unsigned long pwrmode = smc501_readl(sm->regs + SM501_CURRENT_CLOCK); + unsigned long msrc = (pwrmode & SM501_POWERMODE_M_SRC); + unsigned long m1src = (pwrmode & SM501_POWERMODE_M1_SRC); + + return ((msrc == 0 && m1src != 0) || (msrc != 0 && m1src == 0)); +} + +static unsigned int sm501_mem_local[] = { + [0] = 4*1024*1024, + [1] = 8*1024*1024, + [2] = 16*1024*1024, + [3] = 32*1024*1024, + [4] = 64*1024*1024, + [5] = 2*1024*1024, +}; + +/* sm501_init_dev + * + * Common init code for an SM501 +*/ + +static int sm501_init_dev(struct sm501_devdata *sm) +{ + struct sm501_initdata *idata; + struct sm501_platdata *pdata; + resource_size_t mem_avail; + unsigned long dramctrl; + unsigned long devid; + int ret; + + mutex_init(&sm->clock_lock); + spin_lock_init(&sm->reg_lock); + + INIT_LIST_HEAD(&sm->devices); + + devid = smc501_readl(sm->regs + SM501_DEVICEID); + + if ((devid & SM501_DEVICEID_IDMASK) != SM501_DEVICEID_SM501) { + dev_err(sm->dev, "incorrect device id %08lx\n", devid); + return -EINVAL; + } + + /* disable irqs */ + smc501_writel(0, sm->regs + SM501_IRQ_MASK); + + dramctrl = smc501_readl(sm->regs + SM501_DRAM_CONTROL); + mem_avail = sm501_mem_local[(dramctrl >> 13) & 0x7]; + + dev_info(sm->dev, "SM501 At %p: Version %08lx, %ld Mb, IRQ %d\n", + sm->regs, devid, (unsigned long)mem_avail >> 20, sm->irq); + + sm->rev = devid & SM501_DEVICEID_REVMASK; + + sm501_dump_gate(sm); + + ret = device_create_file(sm->dev, &dev_attr_dbg_regs); + if (ret) + dev_err(sm->dev, "failed to create debug regs file\n"); + + sm501_dump_clk(sm); + + /* check to see if we have some device initialisation */ + + pdata = sm->platdata; + idata = pdata ? pdata->init : NULL; + + if (idata) { + sm501_init_regs(sm, idata); + + if (idata->devices & SM501_USE_USB_HOST) + sm501_register_usbhost(sm, &mem_avail); + if (idata->devices & (SM501_USE_UART0 | SM501_USE_UART1)) + sm501_register_uart(sm, idata->devices); + if (idata->devices & SM501_USE_GPIO) + sm501_register_gpio(sm); + } + + if (pdata && pdata->gpio_i2c != NULL && pdata->gpio_i2c_nr > 0) { + if (!sm501_gpio_isregistered(sm)) + dev_err(sm->dev, "no gpio available for i2c gpio.\n"); + else + sm501_register_gpio_i2c(sm, pdata); + } + + ret = sm501_check_clocks(sm); + if (ret) { + dev_err(sm->dev, "M1X and M clocks sourced from different " + "PLLs\n"); + return -EINVAL; + } + + /* always create a framebuffer */ + sm501_register_display(sm, &mem_avail); + + return 0; +} + +static int sm501_plat_probe(struct platform_device *dev) +{ + struct sm501_devdata *sm; + int ret; + + sm = kzalloc(sizeof(struct sm501_devdata), GFP_KERNEL); + if (sm == NULL) { + dev_err(&dev->dev, "no memory for device data\n"); + ret = -ENOMEM; + goto err1; + } + + sm->dev = &dev->dev; + sm->pdev_id = dev->id; + sm->platdata = dev_get_platdata(&dev->dev); + + ret = platform_get_irq(dev, 0); + if (ret < 0) { + dev_err(&dev->dev, "failed to get irq resource\n"); + goto err_res; + } + sm->irq = ret; + + sm->io_res = platform_get_resource(dev, IORESOURCE_MEM, 1); + sm->mem_res = platform_get_resource(dev, IORESOURCE_MEM, 0); + + if (sm->io_res == NULL || sm->mem_res == NULL) { + dev_err(&dev->dev, "failed to get IO resource\n"); + ret = -ENOENT; + goto err_res; + } + + sm->regs_claim = request_mem_region(sm->io_res->start, + 0x100, "sm501"); + + if (sm->regs_claim == NULL) { + dev_err(&dev->dev, "cannot claim registers\n"); + ret = -EBUSY; + goto err_res; + } + + platform_set_drvdata(dev, sm); + + sm->regs = ioremap(sm->io_res->start, resource_size(sm->io_res)); + + if (sm->regs == NULL) { + dev_err(&dev->dev, "cannot remap registers\n"); + ret = -EIO; + goto err_claim; + } + + return sm501_init_dev(sm); + + err_claim: + release_resource(sm->regs_claim); + kfree(sm->regs_claim); + err_res: + kfree(sm); + err1: + return ret; + +} + +#ifdef CONFIG_PM + +/* power management support */ + +static void sm501_set_power(struct sm501_devdata *sm, int on) +{ + struct sm501_platdata *pd = sm->platdata; + + if (pd == NULL) + return; + + if (pd->get_power) { + if (pd->get_power(sm->dev) == on) { + dev_dbg(sm->dev, "is already %d\n", on); + return; + } + } + + if (pd->set_power) { + dev_dbg(sm->dev, "setting power to %d\n", on); + + pd->set_power(sm->dev, on); + sm501_mdelay(sm, 10); + } +} + +static int sm501_plat_suspend(struct platform_device *pdev, pm_message_t state) +{ + struct sm501_devdata *sm = platform_get_drvdata(pdev); + + sm->in_suspend = 1; + sm->pm_misc = smc501_readl(sm->regs + SM501_MISC_CONTROL); + + sm501_dump_regs(sm); + + if (sm->platdata) { + if (sm->platdata->flags & SM501_FLAG_SUSPEND_OFF) + sm501_set_power(sm, 0); + } + + return 0; +} + +static int sm501_plat_resume(struct platform_device *pdev) +{ + struct sm501_devdata *sm = platform_get_drvdata(pdev); + + sm501_set_power(sm, 1); + + sm501_dump_regs(sm); + sm501_dump_gate(sm); + sm501_dump_clk(sm); + + /* check to see if we are in the same state as when suspended */ + + if (smc501_readl(sm->regs + SM501_MISC_CONTROL) != sm->pm_misc) { + dev_info(sm->dev, "SM501_MISC_CONTROL changed over sleep\n"); + smc501_writel(sm->pm_misc, sm->regs + SM501_MISC_CONTROL); + + /* our suspend causes the controller state to change, + * either by something attempting setup, power loss, + * or an external reset event on power change */ + + if (sm->platdata && sm->platdata->init) { + sm501_init_regs(sm, sm->platdata->init); + } + } + + /* dump our state from resume */ + + sm501_dump_regs(sm); + sm501_dump_clk(sm); + + sm->in_suspend = 0; + + return 0; +} +#else +#define sm501_plat_suspend NULL +#define sm501_plat_resume NULL +#endif + +/* Initialisation data for PCI devices */ + +static struct sm501_initdata sm501_pci_initdata = { + .gpio_high = { + .set = 0x3F000000, /* 24bit panel */ + .mask = 0x0, + }, + .misc_timing = { + .set = 0x010100, /* SDRAM timing */ + .mask = 0x1F1F00, + }, + .misc_control = { + .set = SM501_MISC_PNL_24BIT, + .mask = 0, + }, + + .devices = SM501_USE_ALL, + + /* Errata AB-3 says that 72MHz is the fastest available + * for 33MHZ PCI with proper bus-mastering operation */ + + .mclk = 72 * MHZ, + .m1xclk = 144 * MHZ, +}; + +static struct sm501_platdata_fbsub sm501_pdata_fbsub = { + .flags = (SM501FB_FLAG_USE_INIT_MODE | + SM501FB_FLAG_USE_HWCURSOR | + SM501FB_FLAG_USE_HWACCEL | + SM501FB_FLAG_DISABLE_AT_EXIT), +}; + +static struct sm501_platdata_fb sm501_fb_pdata = { + .fb_route = SM501_FB_OWN, + .fb_crt = &sm501_pdata_fbsub, + .fb_pnl = &sm501_pdata_fbsub, +}; + +static struct sm501_platdata sm501_pci_platdata = { + .init = &sm501_pci_initdata, + .fb = &sm501_fb_pdata, + .gpio_base = -1, +}; + +static int sm501_pci_probe(struct pci_dev *dev, + const struct pci_device_id *id) +{ + struct sm501_devdata *sm; + int err; + + sm = kzalloc(sizeof(struct sm501_devdata), GFP_KERNEL); + if (sm == NULL) { + dev_err(&dev->dev, "no memory for device data\n"); + err = -ENOMEM; + goto err1; + } + + /* set a default set of platform data */ + dev->dev.platform_data = sm->platdata = &sm501_pci_platdata; + + /* set a hopefully unique id for our child platform devices */ + sm->pdev_id = 32 + dev->devfn; + + pci_set_drvdata(dev, sm); + + err = pci_enable_device(dev); + if (err) { + dev_err(&dev->dev, "cannot enable device\n"); + goto err2; + } + + sm->dev = &dev->dev; + sm->irq = dev->irq; + +#ifdef __BIG_ENDIAN + /* if the system is big-endian, we most probably have a + * translation in the IO layer making the PCI bus little endian + * so make the framebuffer swapped pixels */ + + sm501_fb_pdata.flags |= SM501_FBPD_SWAP_FB_ENDIAN; +#endif + + /* check our resources */ + + if (!(pci_resource_flags(dev, 0) & IORESOURCE_MEM)) { + dev_err(&dev->dev, "region #0 is not memory?\n"); + err = -EINVAL; + goto err3; + } + + if (!(pci_resource_flags(dev, 1) & IORESOURCE_MEM)) { + dev_err(&dev->dev, "region #1 is not memory?\n"); + err = -EINVAL; + goto err3; + } + + /* make our resources ready for sharing */ + + sm->io_res = &dev->resource[1]; + sm->mem_res = &dev->resource[0]; + + sm->regs_claim = request_mem_region(sm->io_res->start, + 0x100, "sm501"); + if (sm->regs_claim == NULL) { + dev_err(&dev->dev, "cannot claim registers\n"); + err= -EBUSY; + goto err3; + } + + sm->regs = pci_ioremap_bar(dev, 1); + + if (sm->regs == NULL) { + dev_err(&dev->dev, "cannot remap registers\n"); + err = -EIO; + goto err4; + } + + sm501_init_dev(sm); + return 0; + + err4: + release_resource(sm->regs_claim); + kfree(sm->regs_claim); + err3: + pci_disable_device(dev); + err2: + kfree(sm); + err1: + return err; +} + +static void sm501_remove_sub(struct sm501_devdata *sm, + struct sm501_device *smdev) +{ + list_del(&smdev->list); + platform_device_unregister(&smdev->pdev); +} + +static void sm501_dev_remove(struct sm501_devdata *sm) +{ + struct sm501_device *smdev, *tmp; + + list_for_each_entry_safe(smdev, tmp, &sm->devices, list) + sm501_remove_sub(sm, smdev); + + device_remove_file(sm->dev, &dev_attr_dbg_regs); + + sm501_gpio_remove(sm); +} + +static void sm501_pci_remove(struct pci_dev *dev) +{ + struct sm501_devdata *sm = pci_get_drvdata(dev); + + sm501_dev_remove(sm); + iounmap(sm->regs); + + release_resource(sm->regs_claim); + kfree(sm->regs_claim); + + pci_disable_device(dev); +} + +static int sm501_plat_remove(struct platform_device *dev) +{ + struct sm501_devdata *sm = platform_get_drvdata(dev); + + sm501_dev_remove(sm); + iounmap(sm->regs); + + release_resource(sm->regs_claim); + kfree(sm->regs_claim); + + return 0; +} + +static const struct pci_device_id sm501_pci_tbl[] = { + { 0x126f, 0x0501, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, + { 0, }, +}; + +MODULE_DEVICE_TABLE(pci, sm501_pci_tbl); + +static struct pci_driver sm501_pci_driver = { + .name = "sm501", + .id_table = sm501_pci_tbl, + .probe = sm501_pci_probe, + .remove = sm501_pci_remove, +}; + +MODULE_ALIAS("platform:sm501"); + +static const struct of_device_id of_sm501_match_tbl[] = { + { .compatible = "smi,sm501", }, + { /* end */ } +}; + +static struct platform_driver sm501_plat_driver = { + .driver = { + .name = "sm501", + .of_match_table = of_sm501_match_tbl, + }, + .probe = sm501_plat_probe, + .remove = sm501_plat_remove, + .suspend = sm501_plat_suspend, + .resume = sm501_plat_resume, +}; + +static int __init sm501_base_init(void) +{ + platform_driver_register(&sm501_plat_driver); + return pci_register_driver(&sm501_pci_driver); +} + +static void __exit sm501_base_exit(void) +{ + platform_driver_unregister(&sm501_plat_driver); + pci_unregister_driver(&sm501_pci_driver); +} + +module_init(sm501_base_init); +module_exit(sm501_base_exit); + +MODULE_DESCRIPTION("SM501 Core Driver"); +MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>, Vincent Sanders"); +MODULE_LICENSE("GPL v2"); |