summaryrefslogtreecommitdiffstats
path: root/kernel/drivers/memory/Kconfig
diff options
context:
space:
mode:
Diffstat (limited to 'kernel/drivers/memory/Kconfig')
-rw-r--r--kernel/drivers/memory/Kconfig97
1 files changed, 97 insertions, 0 deletions
diff --git a/kernel/drivers/memory/Kconfig b/kernel/drivers/memory/Kconfig
new file mode 100644
index 000000000..868036f70
--- /dev/null
+++ b/kernel/drivers/memory/Kconfig
@@ -0,0 +1,97 @@
+#
+# Memory devices
+#
+
+menuconfig MEMORY
+ bool "Memory Controller drivers"
+
+if MEMORY
+
+config ATMEL_SDRAMC
+ bool "Atmel (Multi-port DDR-)SDRAM Controller"
+ default y
+ depends on ARCH_AT91 && OF
+ help
+ This driver is for Atmel SDRAM Controller or Atmel Multi-port
+ DDR-SDRAM Controller available on Atmel AT91SAM9 and SAMA5 SoCs.
+ Starting with the at91sam9g45, this controller supports SDR, DDR and
+ LP-DDR memories.
+
+config TI_AEMIF
+ tristate "Texas Instruments AEMIF driver"
+ depends on (ARCH_DAVINCI || ARCH_KEYSTONE) && OF
+ help
+ This driver is for the AEMIF module available in Texas Instruments
+ SoCs. AEMIF stands for Asynchronous External Memory Interface and
+ is intended to provide a glue-less interface to a variety of
+ asynchronuous memory devices like ASRAM, NOR and NAND memory. A total
+ of 256M bytes of any of these memories can be accessed at a given
+ time via four chip selects with 64M byte access per chip select.
+
+config TI_EMIF
+ tristate "Texas Instruments EMIF driver"
+ depends on ARCH_OMAP2PLUS
+ select DDR
+ help
+ This driver is for the EMIF module available in Texas Instruments
+ SoCs. EMIF is an SDRAM controller that, based on its revision,
+ supports one or more of DDR2, DDR3, and LPDDR2 SDRAM protocols.
+ This driver takes care of only LPDDR2 memories presently. The
+ functions of the driver includes re-configuring AC timing
+ parameters and other settings during frequency, voltage and
+ temperature changes
+
+config OMAP_GPMC
+ bool
+ help
+ This driver is for the General Purpose Memory Controller (GPMC)
+ present on Texas Instruments SoCs (e.g. OMAP2+). GPMC allows
+ interfacing to a variety of asynchronous as well as synchronous
+ memory drives like NOR, NAND, OneNAND, SRAM.
+
+config MVEBU_DEVBUS
+ bool "Marvell EBU Device Bus Controller"
+ default y
+ depends on PLAT_ORION && OF
+ help
+ This driver is for the Device Bus controller available in some
+ Marvell EBU SoCs such as Discovery (mv78xx0), Orion (88f5xxx) and
+ Armada 370 and Armada XP. This controller allows to handle flash
+ devices such as NOR, NAND, SRAM, and FPGA.
+
+config TEGRA20_MC
+ bool "Tegra20 Memory Controller(MC) driver"
+ default y
+ depends on ARCH_TEGRA_2x_SOC
+ help
+ This driver is for the Memory Controller(MC) module available
+ in Tegra20 SoCs, mainly for a address translation fault
+ analysis, especially for IOMMU/GART(Graphics Address
+ Relocation Table) module.
+
+config FSL_CORENET_CF
+ tristate "Freescale CoreNet Error Reporting"
+ depends on FSL_SOC_BOOKE
+ help
+ Say Y for reporting of errors from the Freescale CoreNet
+ Coherency Fabric. Errors reported include accesses to
+ physical addresses that mapped by no local access window
+ (LAW) or an invalid LAW, as well as bad cache state that
+ represents a coherency violation.
+
+config FSL_IFC
+ bool
+ depends on FSL_SOC
+
+config JZ4780_NEMC
+ bool "Ingenic JZ4780 SoC NEMC driver"
+ default y
+ depends on MACH_JZ4780
+ help
+ This driver is for the NAND/External Memory Controller (NEMC) in
+ the Ingenic JZ4780. This controller is used to handle external
+ memory devices such as NAND and SRAM.
+
+source "drivers/memory/tegra/Kconfig"
+
+endif