summaryrefslogtreecommitdiffstats
path: root/kernel/drivers/media/usb/em28xx/em28xx-i2c.c
diff options
context:
space:
mode:
Diffstat (limited to 'kernel/drivers/media/usb/em28xx/em28xx-i2c.c')
-rw-r--r--kernel/drivers/media/usb/em28xx/em28xx-i2c.c989
1 files changed, 989 insertions, 0 deletions
diff --git a/kernel/drivers/media/usb/em28xx/em28xx-i2c.c b/kernel/drivers/media/usb/em28xx/em28xx-i2c.c
new file mode 100644
index 000000000..a19b5c8b5
--- /dev/null
+++ b/kernel/drivers/media/usb/em28xx/em28xx-i2c.c
@@ -0,0 +1,989 @@
+/*
+ em28xx-i2c.c - driver for Empia EM2800/EM2820/2840 USB video capture devices
+
+ Copyright (C) 2005 Ludovico Cavedon <cavedon@sssup.it>
+ Markus Rechberger <mrechberger@gmail.com>
+ Mauro Carvalho Chehab <mchehab@infradead.org>
+ Sascha Sommer <saschasommer@freenet.de>
+ Copyright (C) 2013 Frank Schäfer <fschaefer.oss@googlemail.com>
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/usb.h>
+#include <linux/i2c.h>
+#include <linux/jiffies.h>
+
+#include "em28xx.h"
+#include "tuner-xc2028.h"
+#include <media/v4l2-common.h>
+#include <media/tuner.h>
+
+/* ----------------------------------------------------------- */
+
+static unsigned int i2c_scan;
+module_param(i2c_scan, int, 0444);
+MODULE_PARM_DESC(i2c_scan, "scan i2c bus at insmod time");
+
+static unsigned int i2c_debug;
+module_param(i2c_debug, int, 0644);
+MODULE_PARM_DESC(i2c_debug, "i2c debug message level (1: normal debug, 2: show I2C transfers)");
+
+/*
+ * em2800_i2c_send_bytes()
+ * send up to 4 bytes to the em2800 i2c device
+ */
+static int em2800_i2c_send_bytes(struct em28xx *dev, u8 addr, u8 *buf, u16 len)
+{
+ unsigned long timeout = jiffies + msecs_to_jiffies(EM28XX_I2C_XFER_TIMEOUT);
+ int ret;
+ u8 b2[6];
+
+ if (len < 1 || len > 4)
+ return -EOPNOTSUPP;
+
+ BUG_ON(len < 1 || len > 4);
+ b2[5] = 0x80 + len - 1;
+ b2[4] = addr;
+ b2[3] = buf[0];
+ if (len > 1)
+ b2[2] = buf[1];
+ if (len > 2)
+ b2[1] = buf[2];
+ if (len > 3)
+ b2[0] = buf[3];
+
+ /* trigger write */
+ ret = dev->em28xx_write_regs(dev, 4 - len, &b2[4 - len], 2 + len);
+ if (ret != 2 + len) {
+ em28xx_warn("failed to trigger write to i2c address 0x%x (error=%i)\n",
+ addr, ret);
+ return (ret < 0) ? ret : -EIO;
+ }
+ /* wait for completion */
+ while (time_is_after_jiffies(timeout)) {
+ ret = dev->em28xx_read_reg(dev, 0x05);
+ if (ret == 0x80 + len - 1)
+ return len;
+ if (ret == 0x94 + len - 1) {
+ if (i2c_debug == 1)
+ em28xx_warn("R05 returned 0x%02x: I2C ACK error\n",
+ ret);
+ return -ENXIO;
+ }
+ if (ret < 0) {
+ em28xx_warn("failed to get i2c transfer status from bridge register (error=%i)\n",
+ ret);
+ return ret;
+ }
+ msleep(5);
+ }
+ if (i2c_debug)
+ em28xx_warn("write to i2c device at 0x%x timed out\n", addr);
+ return -ETIMEDOUT;
+}
+
+/*
+ * em2800_i2c_recv_bytes()
+ * read up to 4 bytes from the em2800 i2c device
+ */
+static int em2800_i2c_recv_bytes(struct em28xx *dev, u8 addr, u8 *buf, u16 len)
+{
+ unsigned long timeout = jiffies + msecs_to_jiffies(EM28XX_I2C_XFER_TIMEOUT);
+ u8 buf2[4];
+ int ret;
+ int i;
+
+ if (len < 1 || len > 4)
+ return -EOPNOTSUPP;
+
+ /* trigger read */
+ buf2[1] = 0x84 + len - 1;
+ buf2[0] = addr;
+ ret = dev->em28xx_write_regs(dev, 0x04, buf2, 2);
+ if (ret != 2) {
+ em28xx_warn("failed to trigger read from i2c address 0x%x (error=%i)\n",
+ addr, ret);
+ return (ret < 0) ? ret : -EIO;
+ }
+
+ /* wait for completion */
+ while (time_is_after_jiffies(timeout)) {
+ ret = dev->em28xx_read_reg(dev, 0x05);
+ if (ret == 0x84 + len - 1)
+ break;
+ if (ret == 0x94 + len - 1) {
+ if (i2c_debug == 1)
+ em28xx_warn("R05 returned 0x%02x: I2C ACK error\n",
+ ret);
+ return -ENXIO;
+ }
+ if (ret < 0) {
+ em28xx_warn("failed to get i2c transfer status from bridge register (error=%i)\n",
+ ret);
+ return ret;
+ }
+ msleep(5);
+ }
+ if (ret != 0x84 + len - 1) {
+ if (i2c_debug)
+ em28xx_warn("read from i2c device at 0x%x timed out\n",
+ addr);
+ }
+
+ /* get the received message */
+ ret = dev->em28xx_read_reg_req_len(dev, 0x00, 4-len, buf2, len);
+ if (ret != len) {
+ em28xx_warn("reading from i2c device at 0x%x failed: couldn't get the received message from the bridge (error=%i)\n",
+ addr, ret);
+ return (ret < 0) ? ret : -EIO;
+ }
+ for (i = 0; i < len; i++)
+ buf[i] = buf2[len - 1 - i];
+
+ return ret;
+}
+
+/*
+ * em2800_i2c_check_for_device()
+ * check if there is an i2c device at the supplied address
+ */
+static int em2800_i2c_check_for_device(struct em28xx *dev, u8 addr)
+{
+ u8 buf;
+ int ret;
+
+ ret = em2800_i2c_recv_bytes(dev, addr, &buf, 1);
+ if (ret == 1)
+ return 0;
+ return (ret < 0) ? ret : -EIO;
+}
+
+/*
+ * em28xx_i2c_send_bytes()
+ */
+static int em28xx_i2c_send_bytes(struct em28xx *dev, u16 addr, u8 *buf,
+ u16 len, int stop)
+{
+ unsigned long timeout = jiffies + msecs_to_jiffies(EM28XX_I2C_XFER_TIMEOUT);
+ int ret;
+
+ if (len < 1 || len > 64)
+ return -EOPNOTSUPP;
+ /*
+ * NOTE: limited by the USB ctrl message constraints
+ * Zero length reads always succeed, even if no device is connected
+ */
+
+ /* Write to i2c device */
+ ret = dev->em28xx_write_regs_req(dev, stop ? 2 : 3, addr, buf, len);
+ if (ret != len) {
+ if (ret < 0) {
+ em28xx_warn("writing to i2c device at 0x%x failed (error=%i)\n",
+ addr, ret);
+ return ret;
+ } else {
+ em28xx_warn("%i bytes write to i2c device at 0x%x requested, but %i bytes written\n",
+ len, addr, ret);
+ return -EIO;
+ }
+ }
+
+ /* wait for completion */
+ while (time_is_after_jiffies(timeout)) {
+ ret = dev->em28xx_read_reg(dev, 0x05);
+ if (ret == 0) /* success */
+ return len;
+ if (ret == 0x10) {
+ if (i2c_debug == 1)
+ em28xx_warn("I2C ACK error on writing to addr 0x%02x\n",
+ addr);
+ return -ENXIO;
+ }
+ if (ret < 0) {
+ em28xx_warn("failed to get i2c transfer status from bridge register (error=%i)\n",
+ ret);
+ return ret;
+ }
+ msleep(5);
+ /*
+ * NOTE: do we really have to wait for success ?
+ * Never seen anything else than 0x00 or 0x10
+ * (even with high payload) ...
+ */
+ }
+
+ if (ret == 0x02 || ret == 0x04) {
+ /* NOTE: these errors seem to be related to clock stretching */
+ if (i2c_debug)
+ em28xx_warn("write to i2c device at 0x%x timed out (status=%i)\n",
+ addr, ret);
+ return -ETIMEDOUT;
+ }
+
+ em28xx_warn("write to i2c device at 0x%x failed with unknown error (status=%i)\n",
+ addr, ret);
+ return -EIO;
+}
+
+/*
+ * em28xx_i2c_recv_bytes()
+ * read a byte from the i2c device
+ */
+static int em28xx_i2c_recv_bytes(struct em28xx *dev, u16 addr, u8 *buf, u16 len)
+{
+ int ret;
+
+ if (len < 1 || len > 64)
+ return -EOPNOTSUPP;
+ /*
+ * NOTE: limited by the USB ctrl message constraints
+ * Zero length reads always succeed, even if no device is connected
+ */
+
+ /* Read data from i2c device */
+ ret = dev->em28xx_read_reg_req_len(dev, 2, addr, buf, len);
+ if (ret < 0) {
+ em28xx_warn("reading from i2c device at 0x%x failed (error=%i)\n",
+ addr, ret);
+ return ret;
+ }
+ /*
+ * NOTE: some devices with two i2c busses have the bad habit to return 0
+ * bytes if we are on bus B AND there was no write attempt to the
+ * specified slave address before AND no device is present at the
+ * requested slave address.
+ * Anyway, the next check will fail with -ENXIO in this case, so avoid
+ * spamming the system log on device probing and do nothing here.
+ */
+
+ /* Check success of the i2c operation */
+ ret = dev->em28xx_read_reg(dev, 0x05);
+ if (ret == 0) /* success */
+ return len;
+ if (ret < 0) {
+ em28xx_warn("failed to get i2c transfer status from bridge register (error=%i)\n",
+ ret);
+ return ret;
+ }
+ if (ret == 0x10) {
+ if (i2c_debug == 1)
+ em28xx_warn("I2C ACK error on writing to addr 0x%02x\n",
+ addr);
+ return -ENXIO;
+ }
+
+ if (ret == 0x02 || ret == 0x04) {
+ /* NOTE: these errors seem to be related to clock stretching */
+ if (i2c_debug)
+ em28xx_warn("write to i2c device at 0x%x timed out (status=%i)\n",
+ addr, ret);
+ return -ETIMEDOUT;
+ }
+
+ em28xx_warn("write to i2c device at 0x%x failed with unknown error (status=%i)\n",
+ addr, ret);
+ return -EIO;
+}
+
+/*
+ * em28xx_i2c_check_for_device()
+ * check if there is a i2c_device at the supplied address
+ */
+static int em28xx_i2c_check_for_device(struct em28xx *dev, u16 addr)
+{
+ int ret;
+ u8 buf;
+
+ ret = em28xx_i2c_recv_bytes(dev, addr, &buf, 1);
+ if (ret == 1)
+ return 0;
+ return (ret < 0) ? ret : -EIO;
+}
+
+/*
+ * em25xx_bus_B_send_bytes
+ * write bytes to the i2c device
+ */
+static int em25xx_bus_B_send_bytes(struct em28xx *dev, u16 addr, u8 *buf,
+ u16 len)
+{
+ int ret;
+
+ if (len < 1 || len > 64)
+ return -EOPNOTSUPP;
+ /*
+ * NOTE: limited by the USB ctrl message constraints
+ * Zero length reads always succeed, even if no device is connected
+ */
+
+ /* Set register and write value */
+ ret = dev->em28xx_write_regs_req(dev, 0x06, addr, buf, len);
+ if (ret != len) {
+ if (ret < 0) {
+ em28xx_warn("writing to i2c device at 0x%x failed (error=%i)\n",
+ addr, ret);
+ return ret;
+ } else {
+ em28xx_warn("%i bytes write to i2c device at 0x%x requested, but %i bytes written\n",
+ len, addr, ret);
+ return -EIO;
+ }
+ }
+ /* Check success */
+ ret = dev->em28xx_read_reg_req(dev, 0x08, 0x0000);
+ /*
+ * NOTE: the only error we've seen so far is
+ * 0x01 when the slave device is not present
+ */
+ if (!ret)
+ return len;
+ else if (ret > 0) {
+ if (i2c_debug == 1)
+ em28xx_warn("Bus B R08 returned 0x%02x: I2C ACK error\n",
+ ret);
+ return -ENXIO;
+ }
+
+ return ret;
+ /*
+ * NOTE: With chip types (other chip IDs) which actually don't support
+ * this operation, it seems to succeed ALWAYS ! (even if there is no
+ * slave device or even no second i2c bus provided)
+ */
+}
+
+/*
+ * em25xx_bus_B_recv_bytes
+ * read bytes from the i2c device
+ */
+static int em25xx_bus_B_recv_bytes(struct em28xx *dev, u16 addr, u8 *buf,
+ u16 len)
+{
+ int ret;
+
+ if (len < 1 || len > 64)
+ return -EOPNOTSUPP;
+ /*
+ * NOTE: limited by the USB ctrl message constraints
+ * Zero length reads always succeed, even if no device is connected
+ */
+
+ /* Read value */
+ ret = dev->em28xx_read_reg_req_len(dev, 0x06, addr, buf, len);
+ if (ret < 0) {
+ em28xx_warn("reading from i2c device at 0x%x failed (error=%i)\n",
+ addr, ret);
+ return ret;
+ }
+ /*
+ * NOTE: some devices with two i2c busses have the bad habit to return 0
+ * bytes if we are on bus B AND there was no write attempt to the
+ * specified slave address before AND no device is present at the
+ * requested slave address.
+ * Anyway, the next check will fail with -ENXIO in this case, so avoid
+ * spamming the system log on device probing and do nothing here.
+ */
+
+ /* Check success */
+ ret = dev->em28xx_read_reg_req(dev, 0x08, 0x0000);
+ /*
+ * NOTE: the only error we've seen so far is
+ * 0x01 when the slave device is not present
+ */
+ if (!ret)
+ return len;
+ else if (ret > 0) {
+ if (i2c_debug == 1)
+ em28xx_warn("Bus B R08 returned 0x%02x: I2C ACK error\n",
+ ret);
+ return -ENXIO;
+ }
+
+ return ret;
+ /*
+ * NOTE: With chip types (other chip IDs) which actually don't support
+ * this operation, it seems to succeed ALWAYS ! (even if there is no
+ * slave device or even no second i2c bus provided)
+ */
+}
+
+/*
+ * em25xx_bus_B_check_for_device()
+ * check if there is a i2c device at the supplied address
+ */
+static int em25xx_bus_B_check_for_device(struct em28xx *dev, u16 addr)
+{
+ u8 buf;
+ int ret;
+
+ ret = em25xx_bus_B_recv_bytes(dev, addr, &buf, 1);
+ if (ret < 0)
+ return ret;
+
+ return 0;
+ /*
+ * NOTE: With chips which do not support this operation,
+ * it seems to succeed ALWAYS ! (even if no device connected)
+ */
+}
+
+static inline int i2c_check_for_device(struct em28xx_i2c_bus *i2c_bus, u16 addr)
+{
+ struct em28xx *dev = i2c_bus->dev;
+ int rc = -EOPNOTSUPP;
+
+ if (i2c_bus->algo_type == EM28XX_I2C_ALGO_EM28XX)
+ rc = em28xx_i2c_check_for_device(dev, addr);
+ else if (i2c_bus->algo_type == EM28XX_I2C_ALGO_EM2800)
+ rc = em2800_i2c_check_for_device(dev, addr);
+ else if (i2c_bus->algo_type == EM28XX_I2C_ALGO_EM25XX_BUS_B)
+ rc = em25xx_bus_B_check_for_device(dev, addr);
+ return rc;
+}
+
+static inline int i2c_recv_bytes(struct em28xx_i2c_bus *i2c_bus,
+ struct i2c_msg msg)
+{
+ struct em28xx *dev = i2c_bus->dev;
+ u16 addr = msg.addr << 1;
+ int rc = -EOPNOTSUPP;
+
+ if (i2c_bus->algo_type == EM28XX_I2C_ALGO_EM28XX)
+ rc = em28xx_i2c_recv_bytes(dev, addr, msg.buf, msg.len);
+ else if (i2c_bus->algo_type == EM28XX_I2C_ALGO_EM2800)
+ rc = em2800_i2c_recv_bytes(dev, addr, msg.buf, msg.len);
+ else if (i2c_bus->algo_type == EM28XX_I2C_ALGO_EM25XX_BUS_B)
+ rc = em25xx_bus_B_recv_bytes(dev, addr, msg.buf, msg.len);
+ return rc;
+}
+
+static inline int i2c_send_bytes(struct em28xx_i2c_bus *i2c_bus,
+ struct i2c_msg msg, int stop)
+{
+ struct em28xx *dev = i2c_bus->dev;
+ u16 addr = msg.addr << 1;
+ int rc = -EOPNOTSUPP;
+
+ if (i2c_bus->algo_type == EM28XX_I2C_ALGO_EM28XX)
+ rc = em28xx_i2c_send_bytes(dev, addr, msg.buf, msg.len, stop);
+ else if (i2c_bus->algo_type == EM28XX_I2C_ALGO_EM2800)
+ rc = em2800_i2c_send_bytes(dev, addr, msg.buf, msg.len);
+ else if (i2c_bus->algo_type == EM28XX_I2C_ALGO_EM25XX_BUS_B)
+ rc = em25xx_bus_B_send_bytes(dev, addr, msg.buf, msg.len);
+ return rc;
+}
+
+/*
+ * em28xx_i2c_xfer()
+ * the main i2c transfer function
+ */
+static int em28xx_i2c_xfer(struct i2c_adapter *i2c_adap,
+ struct i2c_msg msgs[], int num)
+{
+ struct em28xx_i2c_bus *i2c_bus = i2c_adap->algo_data;
+ struct em28xx *dev = i2c_bus->dev;
+ unsigned bus = i2c_bus->bus;
+ int addr, rc, i;
+ u8 reg;
+
+ /* prevent i2c xfer attempts after device is disconnected
+ some fe's try to do i2c writes/reads from their release
+ interfaces when called in disconnect path */
+ if (dev->disconnected)
+ return -ENODEV;
+
+ rc = rt_mutex_trylock(&dev->i2c_bus_lock);
+ if (rc < 0)
+ return rc;
+
+ /* Switch I2C bus if needed */
+ if (bus != dev->cur_i2c_bus &&
+ i2c_bus->algo_type == EM28XX_I2C_ALGO_EM28XX) {
+ if (bus == 1)
+ reg = EM2874_I2C_SECONDARY_BUS_SELECT;
+ else
+ reg = 0;
+ em28xx_write_reg_bits(dev, EM28XX_R06_I2C_CLK, reg,
+ EM2874_I2C_SECONDARY_BUS_SELECT);
+ dev->cur_i2c_bus = bus;
+ }
+
+ if (num <= 0) {
+ rt_mutex_unlock(&dev->i2c_bus_lock);
+ return 0;
+ }
+ for (i = 0; i < num; i++) {
+ addr = msgs[i].addr << 1;
+ if (i2c_debug > 1)
+ printk(KERN_DEBUG "%s at %s: %s %s addr=%02x len=%d:",
+ dev->name, __func__ ,
+ (msgs[i].flags & I2C_M_RD) ? "read" : "write",
+ i == num - 1 ? "stop" : "nonstop",
+ addr, msgs[i].len);
+ if (!msgs[i].len) {
+ /*
+ * no len: check only for device presence
+ * This code is only called during device probe.
+ */
+ rc = i2c_check_for_device(i2c_bus, addr);
+ if (rc < 0) {
+ if (rc == -ENXIO) {
+ if (i2c_debug > 1)
+ printk(KERN_CONT " no device\n");
+ rc = -ENODEV;
+ } else {
+ if (i2c_debug > 1)
+ printk(KERN_CONT " ERROR: %i\n", rc);
+ }
+ rt_mutex_unlock(&dev->i2c_bus_lock);
+ return rc;
+ }
+ } else if (msgs[i].flags & I2C_M_RD) {
+ /* read bytes */
+ rc = i2c_recv_bytes(i2c_bus, msgs[i]);
+
+ if (i2c_debug > 1 && rc >= 0)
+ printk(KERN_CONT " %*ph",
+ msgs[i].len, msgs[i].buf);
+ } else {
+ if (i2c_debug > 1)
+ printk(KERN_CONT " %*ph",
+ msgs[i].len, msgs[i].buf);
+
+ /* write bytes */
+ rc = i2c_send_bytes(i2c_bus, msgs[i], i == num - 1);
+ }
+ if (rc < 0) {
+ if (i2c_debug > 1)
+ printk(KERN_CONT " ERROR: %i\n", rc);
+ rt_mutex_unlock(&dev->i2c_bus_lock);
+ return rc;
+ }
+ if (i2c_debug > 1)
+ printk(KERN_CONT "\n");
+ }
+
+ rt_mutex_unlock(&dev->i2c_bus_lock);
+ return num;
+}
+
+/*
+ * based on linux/sunrpc/svcauth.h and linux/hash.h
+ * The original hash function returns a different value, if arch is x86_64
+ * or i386.
+ */
+static inline unsigned long em28xx_hash_mem(char *buf, int length, int bits)
+{
+ unsigned long hash = 0;
+ unsigned long l = 0;
+ int len = 0;
+ unsigned char c;
+
+ do {
+ if (len == length) {
+ c = (char)len;
+ len = -1;
+ } else
+ c = *buf++;
+ l = (l << 8) | c;
+ len++;
+ if ((len & (32 / 8 - 1)) == 0)
+ hash = ((hash^l) * 0x9e370001UL);
+ } while (len);
+
+ return (hash >> (32 - bits)) & 0xffffffffUL;
+}
+
+/*
+ * Helper function to read data blocks from i2c clients with 8 or 16 bit
+ * address width, 8 bit register width and auto incrementation been activated
+ */
+static int em28xx_i2c_read_block(struct em28xx *dev, unsigned bus, u16 addr,
+ bool addr_w16, u16 len, u8 *data)
+{
+ int remain = len, rsize, rsize_max, ret;
+ u8 buf[2];
+
+ /* Sanity check */
+ if (addr + remain > (addr_w16 * 0xff00 + 0xff + 1))
+ return -EINVAL;
+ /* Select address */
+ buf[0] = addr >> 8;
+ buf[1] = addr & 0xff;
+ ret = i2c_master_send(&dev->i2c_client[bus], buf + !addr_w16, 1 + addr_w16);
+ if (ret < 0)
+ return ret;
+ /* Read data */
+ if (dev->board.is_em2800)
+ rsize_max = 4;
+ else
+ rsize_max = 64;
+ while (remain > 0) {
+ if (remain > rsize_max)
+ rsize = rsize_max;
+ else
+ rsize = remain;
+
+ ret = i2c_master_recv(&dev->i2c_client[bus], data, rsize);
+ if (ret < 0)
+ return ret;
+
+ remain -= rsize;
+ data += rsize;
+ }
+
+ return len;
+}
+
+static int em28xx_i2c_eeprom(struct em28xx *dev, unsigned bus,
+ u8 **eedata, u16 *eedata_len)
+{
+ const u16 len = 256;
+ /*
+ * FIXME common length/size for bytes to read, to display, hash
+ * calculation and returned device dataset. Simplifies the code a lot,
+ * but we might have to deal with multiple sizes in the future !
+ */
+ int err;
+ struct em28xx_eeprom *dev_config;
+ u8 buf, *data;
+
+ *eedata = NULL;
+ *eedata_len = 0;
+
+ /* EEPROM is always on i2c bus 0 on all known devices. */
+
+ dev->i2c_client[bus].addr = 0xa0 >> 1;
+
+ /* Check if board has eeprom */
+ err = i2c_master_recv(&dev->i2c_client[bus], &buf, 0);
+ if (err < 0) {
+ em28xx_info("board has no eeprom\n");
+ return -ENODEV;
+ }
+
+ data = kzalloc(len, GFP_KERNEL);
+ if (data == NULL)
+ return -ENOMEM;
+
+ /* Read EEPROM content */
+ err = em28xx_i2c_read_block(dev, bus, 0x0000,
+ dev->eeprom_addrwidth_16bit,
+ len, data);
+ if (err != len) {
+ em28xx_errdev("failed to read eeprom (err=%d)\n", err);
+ goto error;
+ }
+
+ if (i2c_debug) {
+ /* Display eeprom content */
+ print_hex_dump(KERN_INFO, "eeprom ", DUMP_PREFIX_OFFSET,
+ 16, 1, data, len, true);
+
+ if (dev->eeprom_addrwidth_16bit)
+ em28xx_info("eeprom %06x: ... (skipped)\n", 256);
+ }
+
+ if (dev->eeprom_addrwidth_16bit &&
+ data[0] == 0x26 && data[3] == 0x00) {
+ /* new eeprom format; size 4-64kb */
+ u16 mc_start;
+ u16 hwconf_offset;
+
+ dev->hash = em28xx_hash_mem(data, len, 32);
+ mc_start = (data[1] << 8) + 4; /* usually 0x0004 */
+
+ em28xx_info("EEPROM ID = %02x %02x %02x %02x, EEPROM hash = 0x%08lx\n",
+ data[0], data[1], data[2], data[3], dev->hash);
+ em28xx_info("EEPROM info:\n");
+ em28xx_info("\tmicrocode start address = 0x%04x, boot configuration = 0x%02x\n",
+ mc_start, data[2]);
+ /*
+ * boot configuration (address 0x0002):
+ * [0] microcode download speed: 1 = 400 kHz; 0 = 100 kHz
+ * [1] always selects 12 kb RAM
+ * [2] USB device speed: 1 = force Full Speed; 0 = auto detect
+ * [4] 1 = force fast mode and no suspend for device testing
+ * [5:7] USB PHY tuning registers; determined by device
+ * characterization
+ */
+
+ /*
+ * Read hardware config dataset offset from address
+ * (microcode start + 46)
+ */
+ err = em28xx_i2c_read_block(dev, bus, mc_start + 46, 1, 2,
+ data);
+ if (err != 2) {
+ em28xx_errdev("failed to read hardware configuration data from eeprom (err=%d)\n",
+ err);
+ goto error;
+ }
+
+ /* Calculate hardware config dataset start address */
+ hwconf_offset = mc_start + data[0] + (data[1] << 8);
+
+ /* Read hardware config dataset */
+ /*
+ * NOTE: the microcode copy can be multiple pages long, but
+ * we assume the hardware config dataset is the same as in
+ * the old eeprom and not longer than 256 bytes.
+ * tveeprom is currently also limited to 256 bytes.
+ */
+ err = em28xx_i2c_read_block(dev, bus, hwconf_offset, 1, len,
+ data);
+ if (err != len) {
+ em28xx_errdev("failed to read hardware configuration data from eeprom (err=%d)\n",
+ err);
+ goto error;
+ }
+
+ /* Verify hardware config dataset */
+ /* NOTE: not all devices provide this type of dataset */
+ if (data[0] != 0x1a || data[1] != 0xeb ||
+ data[2] != 0x67 || data[3] != 0x95) {
+ em28xx_info("\tno hardware configuration dataset found in eeprom\n");
+ kfree(data);
+ return 0;
+ }
+
+ /* TODO: decrypt eeprom data for camera bridges (em25xx, em276x+) */
+
+ } else if (!dev->eeprom_addrwidth_16bit &&
+ data[0] == 0x1a && data[1] == 0xeb &&
+ data[2] == 0x67 && data[3] == 0x95) {
+ dev->hash = em28xx_hash_mem(data, len, 32);
+ em28xx_info("EEPROM ID = %02x %02x %02x %02x, EEPROM hash = 0x%08lx\n",
+ data[0], data[1], data[2], data[3], dev->hash);
+ em28xx_info("EEPROM info:\n");
+ } else {
+ em28xx_info("unknown eeprom format or eeprom corrupted !\n");
+ err = -ENODEV;
+ goto error;
+ }
+
+ *eedata = data;
+ *eedata_len = len;
+ dev_config = (void *)*eedata;
+
+ switch (le16_to_cpu(dev_config->chip_conf) >> 4 & 0x3) {
+ case 0:
+ em28xx_info("\tNo audio on board.\n");
+ break;
+ case 1:
+ em28xx_info("\tAC97 audio (5 sample rates)\n");
+ break;
+ case 2:
+ if (dev->chip_id < CHIP_ID_EM2860)
+ em28xx_info("\tI2S audio, sample rate=32k\n");
+ else
+ em28xx_info("\tI2S audio, 3 sample rates\n");
+ break;
+ case 3:
+ if (dev->chip_id < CHIP_ID_EM2860)
+ em28xx_info("\tI2S audio, 3 sample rates\n");
+ else
+ em28xx_info("\tI2S audio, 5 sample rates\n");
+ break;
+ }
+
+ if (le16_to_cpu(dev_config->chip_conf) & 1 << 3)
+ em28xx_info("\tUSB Remote wakeup capable\n");
+
+ if (le16_to_cpu(dev_config->chip_conf) & 1 << 2)
+ em28xx_info("\tUSB Self power capable\n");
+
+ switch (le16_to_cpu(dev_config->chip_conf) & 0x3) {
+ case 0:
+ em28xx_info("\t500mA max power\n");
+ break;
+ case 1:
+ em28xx_info("\t400mA max power\n");
+ break;
+ case 2:
+ em28xx_info("\t300mA max power\n");
+ break;
+ case 3:
+ em28xx_info("\t200mA max power\n");
+ break;
+ }
+ em28xx_info("\tTable at offset 0x%02x, strings=0x%04x, 0x%04x, 0x%04x\n",
+ dev_config->string_idx_table,
+ le16_to_cpu(dev_config->string1),
+ le16_to_cpu(dev_config->string2),
+ le16_to_cpu(dev_config->string3));
+
+ return 0;
+
+error:
+ kfree(data);
+ return err;
+}
+
+/* ----------------------------------------------------------- */
+
+/*
+ * functionality()
+ */
+static u32 functionality(struct i2c_adapter *i2c_adap)
+{
+ struct em28xx_i2c_bus *i2c_bus = i2c_adap->algo_data;
+
+ if ((i2c_bus->algo_type == EM28XX_I2C_ALGO_EM28XX) ||
+ (i2c_bus->algo_type == EM28XX_I2C_ALGO_EM25XX_BUS_B)) {
+ return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
+ } else if (i2c_bus->algo_type == EM28XX_I2C_ALGO_EM2800) {
+ return (I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL) &
+ ~I2C_FUNC_SMBUS_WRITE_BLOCK_DATA;
+ }
+
+ WARN(1, "Unknown i2c bus algorithm.\n");
+ return 0;
+}
+
+static struct i2c_algorithm em28xx_algo = {
+ .master_xfer = em28xx_i2c_xfer,
+ .functionality = functionality,
+};
+
+static struct i2c_adapter em28xx_adap_template = {
+ .owner = THIS_MODULE,
+ .name = "em28xx",
+ .algo = &em28xx_algo,
+};
+
+static struct i2c_client em28xx_client_template = {
+ .name = "em28xx internal",
+};
+
+/* ----------------------------------------------------------- */
+
+/*
+ * i2c_devs
+ * incomplete list of known devices
+ */
+static char *i2c_devs[128] = {
+ [0x1c >> 1] = "lgdt330x",
+ [0x3e >> 1] = "remote IR sensor",
+ [0x4a >> 1] = "saa7113h",
+ [0x52 >> 1] = "drxk",
+ [0x60 >> 1] = "remote IR sensor",
+ [0x8e >> 1] = "remote IR sensor",
+ [0x86 >> 1] = "tda9887",
+ [0x80 >> 1] = "msp34xx",
+ [0x88 >> 1] = "msp34xx",
+ [0xa0 >> 1] = "eeprom",
+ [0xb0 >> 1] = "tda9874",
+ [0xb8 >> 1] = "tvp5150a",
+ [0xba >> 1] = "webcam sensor or tvp5150a",
+ [0xc0 >> 1] = "tuner (analog)",
+ [0xc2 >> 1] = "tuner (analog)",
+ [0xc4 >> 1] = "tuner (analog)",
+ [0xc6 >> 1] = "tuner (analog)",
+};
+
+/*
+ * do_i2c_scan()
+ * check i2c address range for devices
+ */
+void em28xx_do_i2c_scan(struct em28xx *dev, unsigned bus)
+{
+ u8 i2c_devicelist[128];
+ unsigned char buf;
+ int i, rc;
+
+ memset(i2c_devicelist, 0, ARRAY_SIZE(i2c_devicelist));
+
+ for (i = 0; i < ARRAY_SIZE(i2c_devs); i++) {
+ dev->i2c_client[bus].addr = i;
+ rc = i2c_master_recv(&dev->i2c_client[bus], &buf, 0);
+ if (rc < 0)
+ continue;
+ i2c_devicelist[i] = i;
+ em28xx_info("found i2c device @ 0x%x on bus %d [%s]\n",
+ i << 1, bus, i2c_devs[i] ? i2c_devs[i] : "???");
+ }
+
+ if (bus == dev->def_i2c_bus)
+ dev->i2c_hash = em28xx_hash_mem(i2c_devicelist,
+ ARRAY_SIZE(i2c_devicelist), 32);
+}
+
+/*
+ * em28xx_i2c_register()
+ * register i2c bus
+ */
+int em28xx_i2c_register(struct em28xx *dev, unsigned bus,
+ enum em28xx_i2c_algo_type algo_type)
+{
+ int retval;
+
+ BUG_ON(!dev->em28xx_write_regs || !dev->em28xx_read_reg);
+ BUG_ON(!dev->em28xx_write_regs_req || !dev->em28xx_read_reg_req);
+
+ if (bus >= NUM_I2C_BUSES)
+ return -ENODEV;
+
+ dev->i2c_adap[bus] = em28xx_adap_template;
+ dev->i2c_adap[bus].dev.parent = &dev->udev->dev;
+ strcpy(dev->i2c_adap[bus].name, dev->name);
+
+ dev->i2c_bus[bus].bus = bus;
+ dev->i2c_bus[bus].algo_type = algo_type;
+ dev->i2c_bus[bus].dev = dev;
+ dev->i2c_adap[bus].algo_data = &dev->i2c_bus[bus];
+
+ retval = i2c_add_adapter(&dev->i2c_adap[bus]);
+ if (retval < 0) {
+ em28xx_errdev("%s: i2c_add_adapter failed! retval [%d]\n",
+ __func__, retval);
+ return retval;
+ }
+
+ dev->i2c_client[bus] = em28xx_client_template;
+ dev->i2c_client[bus].adapter = &dev->i2c_adap[bus];
+
+ /* Up to now, all eeproms are at bus 0 */
+ if (!bus) {
+ retval = em28xx_i2c_eeprom(dev, bus, &dev->eedata, &dev->eedata_len);
+ if ((retval < 0) && (retval != -ENODEV)) {
+ em28xx_errdev("%s: em28xx_i2_eeprom failed! retval [%d]\n",
+ __func__, retval);
+
+ return retval;
+ }
+ }
+
+ if (i2c_scan)
+ em28xx_do_i2c_scan(dev, bus);
+
+ return 0;
+}
+
+/*
+ * em28xx_i2c_unregister()
+ * unregister i2c_bus
+ */
+int em28xx_i2c_unregister(struct em28xx *dev, unsigned bus)
+{
+ if (bus >= NUM_I2C_BUSES)
+ return -ENODEV;
+
+ i2c_del_adapter(&dev->i2c_adap[bus]);
+ return 0;
+}