diff options
Diffstat (limited to 'kernel/drivers/media/usb/dvb-usb/friio.c')
| -rw-r--r-- | kernel/drivers/media/usb/dvb-usb/friio.c | 522 |
1 files changed, 522 insertions, 0 deletions
diff --git a/kernel/drivers/media/usb/dvb-usb/friio.c b/kernel/drivers/media/usb/dvb-usb/friio.c new file mode 100644 index 000000000..474a17e4d --- /dev/null +++ b/kernel/drivers/media/usb/dvb-usb/friio.c @@ -0,0 +1,522 @@ +/* DVB USB compliant Linux driver for the Friio USB2.0 ISDB-T receiver. + * + * Copyright (C) 2009 Akihiro Tsukada <tskd2@yahoo.co.jp> + * + * This module is based off the the gl861 and vp702x modules. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation, version 2. + * + * see Documentation/dvb/README.dvb-usb for more information + */ +#include "friio.h" + +/* debug */ +int dvb_usb_friio_debug; +module_param_named(debug, dvb_usb_friio_debug, int, 0644); +MODULE_PARM_DESC(debug, + "set debugging level (1=info,2=xfer,4=rc,8=fe (or-able))." + DVB_USB_DEBUG_STATUS); + +DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); + +/** + * Indirect I2C access to the PLL via FE. + * whole I2C protocol data to the PLL is sent via the FE's I2C register. + * This is done by a control msg to the FE with the I2C data accompanied, and + * a specific USB request number is assigned for that purpose. + * + * this func sends wbuf[1..] to the I2C register wbuf[0] at addr (= at FE). + * TODO: refoctored, smarter i2c functions. + */ +static int gl861_i2c_ctrlmsg_data(struct dvb_usb_device *d, u8 addr, + u8 *wbuf, u16 wlen, u8 *rbuf, u16 rlen) +{ + u16 index = wbuf[0]; /* must be JDVBT90502_2ND_I2C_REG(=0xFE) */ + u16 value = addr << (8 + 1); + int wo = (rbuf == NULL || rlen == 0); /* write only */ + u8 req, type; + + deb_xfer("write to PLL:0x%02x via FE reg:0x%02x, len:%d\n", + wbuf[1], wbuf[0], wlen - 1); + + if (wo && wlen >= 2) { + req = GL861_REQ_I2C_DATA_CTRL_WRITE; + type = GL861_WRITE; + udelay(20); + return usb_control_msg(d->udev, usb_sndctrlpipe(d->udev, 0), + req, type, value, index, + &wbuf[1], wlen - 1, 2000); + } + + deb_xfer("not supported ctrl-msg, aborting."); + return -EINVAL; +} + +/* normal I2C access (without extra data arguments). + * write to the register wbuf[0] at I2C address addr with the value wbuf[1], + * or read from the register wbuf[0]. + * register address can be 16bit (wbuf[2]<<8 | wbuf[0]) if wlen==3 + */ +static int gl861_i2c_msg(struct dvb_usb_device *d, u8 addr, + u8 *wbuf, u16 wlen, u8 *rbuf, u16 rlen) +{ + u16 index; + u16 value = addr << (8 + 1); + int wo = (rbuf == NULL || rlen == 0); /* write-only */ + u8 req, type; + unsigned int pipe; + + /* special case for the indirect I2C access to the PLL via FE, */ + if (addr == friio_fe_config.demod_address && + wbuf[0] == JDVBT90502_2ND_I2C_REG) + return gl861_i2c_ctrlmsg_data(d, addr, wbuf, wlen, rbuf, rlen); + + if (wo) { + req = GL861_REQ_I2C_WRITE; + type = GL861_WRITE; + pipe = usb_sndctrlpipe(d->udev, 0); + } else { /* rw */ + req = GL861_REQ_I2C_READ; + type = GL861_READ; + pipe = usb_rcvctrlpipe(d->udev, 0); + } + + switch (wlen) { + case 1: + index = wbuf[0]; + break; + case 2: + index = wbuf[0]; + value = value + wbuf[1]; + break; + case 3: + /* special case for 16bit register-address */ + index = (wbuf[2] << 8) | wbuf[0]; + value = value + wbuf[1]; + break; + default: + deb_xfer("wlen = %x, aborting.", wlen); + return -EINVAL; + } + msleep(1); + return usb_control_msg(d->udev, pipe, req, type, + value, index, rbuf, rlen, 2000); +} + +/* I2C */ +static int gl861_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msg[], + int num) +{ + struct dvb_usb_device *d = i2c_get_adapdata(adap); + int i; + + + if (num > 2) + return -EINVAL; + + if (mutex_lock_interruptible(&d->i2c_mutex) < 0) + return -EAGAIN; + + for (i = 0; i < num; i++) { + /* write/read request */ + if (i + 1 < num && (msg[i + 1].flags & I2C_M_RD)) { + if (gl861_i2c_msg(d, msg[i].addr, + msg[i].buf, msg[i].len, + msg[i + 1].buf, msg[i + 1].len) < 0) + break; + i++; + } else + if (gl861_i2c_msg(d, msg[i].addr, msg[i].buf, + msg[i].len, NULL, 0) < 0) + break; + } + + mutex_unlock(&d->i2c_mutex); + return i; +} + +static u32 gl861_i2c_func(struct i2c_adapter *adapter) +{ + return I2C_FUNC_I2C; +} + +static int friio_ext_ctl(struct dvb_usb_adapter *adap, + u32 sat_color, int lnb_on) +{ + int i; + int ret; + struct i2c_msg msg; + u8 *buf; + u32 mask; + u8 lnb = (lnb_on) ? FRIIO_CTL_LNB : 0; + + buf = kmalloc(2, GFP_KERNEL); + if (!buf) + return -ENOMEM; + + msg.addr = 0x00; + msg.flags = 0; + msg.len = 2; + msg.buf = buf; + + buf[0] = 0x00; + + /* send 2bit header (&B10) */ + buf[1] = lnb | FRIIO_CTL_LED | FRIIO_CTL_STROBE; + ret = gl861_i2c_xfer(&adap->dev->i2c_adap, &msg, 1); + buf[1] |= FRIIO_CTL_CLK; + ret += gl861_i2c_xfer(&adap->dev->i2c_adap, &msg, 1); + + buf[1] = lnb | FRIIO_CTL_STROBE; + ret += gl861_i2c_xfer(&adap->dev->i2c_adap, &msg, 1); + buf[1] |= FRIIO_CTL_CLK; + ret += gl861_i2c_xfer(&adap->dev->i2c_adap, &msg, 1); + + /* send 32bit(satur, R, G, B) data in serial */ + mask = 1 << 31; + for (i = 0; i < 32; i++) { + buf[1] = lnb | FRIIO_CTL_STROBE; + if (sat_color & mask) + buf[1] |= FRIIO_CTL_LED; + ret += gl861_i2c_xfer(&adap->dev->i2c_adap, &msg, 1); + buf[1] |= FRIIO_CTL_CLK; + ret += gl861_i2c_xfer(&adap->dev->i2c_adap, &msg, 1); + mask >>= 1; + } + + /* set the strobe off */ + buf[1] = lnb; + ret += gl861_i2c_xfer(&adap->dev->i2c_adap, &msg, 1); + buf[1] |= FRIIO_CTL_CLK; + ret += gl861_i2c_xfer(&adap->dev->i2c_adap, &msg, 1); + + kfree(buf); + return (ret == 70); +} + + +static int friio_streaming_ctrl(struct dvb_usb_adapter *adap, int onoff); + +/* TODO: move these init cmds to the FE's init routine? */ +static u8 streaming_init_cmds[][2] = { + {0x33, 0x08}, + {0x37, 0x40}, + {0x3A, 0x1F}, + {0x3B, 0xFF}, + {0x3C, 0x1F}, + {0x3D, 0xFF}, + {0x38, 0x00}, + {0x35, 0x00}, + {0x39, 0x00}, + {0x36, 0x00}, +}; +static int cmdlen = sizeof(streaming_init_cmds) / 2; + +/* + * Command sequence in this init function is a replay + * of the captured USB commands from the Windows proprietary driver. + */ +static int friio_initialize(struct dvb_usb_device *d) +{ + int ret; + int i; + int retry = 0; + u8 *rbuf, *wbuf; + + deb_info("%s called.\n", __func__); + + wbuf = kmalloc(3, GFP_KERNEL); + if (!wbuf) + return -ENOMEM; + + rbuf = kmalloc(2, GFP_KERNEL); + if (!rbuf) { + kfree(wbuf); + return -ENOMEM; + } + + /* use gl861_i2c_msg instead of gl861_i2c_xfer(), */ + /* because the i2c device is not set up yet. */ + wbuf[0] = 0x11; + wbuf[1] = 0x02; + ret = gl861_i2c_msg(d, 0x00, wbuf, 2, NULL, 0); + if (ret < 0) + goto error; + msleep(2); + + wbuf[0] = 0x11; + wbuf[1] = 0x00; + ret = gl861_i2c_msg(d, 0x00, wbuf, 2, NULL, 0); + if (ret < 0) + goto error; + msleep(1); + + /* following msgs should be in the FE's init code? */ + /* cmd sequence to identify the device type? (friio black/white) */ + wbuf[0] = 0x03; + wbuf[1] = 0x80; + /* can't use gl861_i2c_cmd, as the register-addr is 16bit(0x0100) */ + ret = usb_control_msg(d->udev, usb_sndctrlpipe(d->udev, 0), + GL861_REQ_I2C_DATA_CTRL_WRITE, GL861_WRITE, + 0x1200, 0x0100, wbuf, 2, 2000); + if (ret < 0) + goto error; + + msleep(2); + wbuf[0] = 0x00; + wbuf[2] = 0x01; /* reg.0x0100 */ + wbuf[1] = 0x00; + ret = gl861_i2c_msg(d, 0x12 >> 1, wbuf, 3, rbuf, 2); + /* my Friio White returns 0xffff. */ + if (ret < 0 || rbuf[0] != 0xff || rbuf[1] != 0xff) + goto error; + + msleep(2); + wbuf[0] = 0x03; + wbuf[1] = 0x80; + ret = usb_control_msg(d->udev, usb_sndctrlpipe(d->udev, 0), + GL861_REQ_I2C_DATA_CTRL_WRITE, GL861_WRITE, + 0x9000, 0x0100, wbuf, 2, 2000); + if (ret < 0) + goto error; + + msleep(2); + wbuf[0] = 0x00; + wbuf[2] = 0x01; /* reg.0x0100 */ + wbuf[1] = 0x00; + ret = gl861_i2c_msg(d, 0x90 >> 1, wbuf, 3, rbuf, 2); + /* my Friio White returns 0xffff again. */ + if (ret < 0 || rbuf[0] != 0xff || rbuf[1] != 0xff) + goto error; + + msleep(1); + +restart: + /* ============ start DEMOD init cmds ================== */ + /* read PLL status to clear the POR bit */ + wbuf[0] = JDVBT90502_2ND_I2C_REG; + wbuf[1] = (FRIIO_PLL_ADDR << 1) + 1; /* +1 for reading */ + ret = gl861_i2c_msg(d, FRIIO_DEMOD_ADDR, wbuf, 2, NULL, 0); + if (ret < 0) + goto error; + + msleep(5); + /* note: DEMODULATOR has 16bit register-address. */ + wbuf[0] = 0x00; + wbuf[2] = 0x01; /* reg addr: 0x0100 */ + wbuf[1] = 0x00; /* val: not used */ + ret = gl861_i2c_msg(d, FRIIO_DEMOD_ADDR, wbuf, 3, rbuf, 1); + if (ret < 0) + goto error; +/* + msleep(1); + wbuf[0] = 0x80; + wbuf[1] = 0x00; + ret = gl861_i2c_msg(d, FRIIO_DEMOD_ADDR, wbuf, 2, rbuf, 1); + if (ret < 0) + goto error; + */ + if (rbuf[0] & 0x80) { /* still in PowerOnReset state? */ + if (++retry > 3) { + deb_info("failed to get the correct" + " FE demod status:0x%02x\n", rbuf[0]); + goto error; + } + msleep(100); + goto restart; + } + + /* TODO: check return value in rbuf */ + /* =========== end DEMOD init cmds ===================== */ + msleep(1); + + wbuf[0] = 0x30; + wbuf[1] = 0x04; + ret = gl861_i2c_msg(d, 0x00, wbuf, 2, NULL, 0); + if (ret < 0) + goto error; + + msleep(2); + /* following 2 cmds unnecessary? */ + wbuf[0] = 0x00; + wbuf[1] = 0x01; + ret = gl861_i2c_msg(d, 0x00, wbuf, 2, NULL, 0); + if (ret < 0) + goto error; + + wbuf[0] = 0x06; + wbuf[1] = 0x0F; + ret = gl861_i2c_msg(d, 0x00, wbuf, 2, NULL, 0); + if (ret < 0) + goto error; + + /* some streaming ctl cmds (maybe) */ + msleep(10); + for (i = 0; i < cmdlen; i++) { + ret = gl861_i2c_msg(d, 0x00, streaming_init_cmds[i], 2, + NULL, 0); + if (ret < 0) + goto error; + msleep(1); + } + msleep(20); + + /* change the LED color etc. */ + ret = friio_streaming_ctrl(&d->adapter[0], 0); + if (ret < 0) + goto error; + + return 0; + +error: + kfree(wbuf); + kfree(rbuf); + deb_info("%s:ret == %d\n", __func__, ret); + return -EIO; +} + +/* Callbacks for DVB USB */ + +static int friio_streaming_ctrl(struct dvb_usb_adapter *adap, int onoff) +{ + int ret; + + deb_info("%s called.(%d)\n", __func__, onoff); + + /* set the LED color and saturation (and LNB on) */ + if (onoff) + ret = friio_ext_ctl(adap, 0x6400ff64, 1); + else + ret = friio_ext_ctl(adap, 0x96ff00ff, 1); + + if (ret != 1) { + deb_info("%s failed to send cmdx. ret==%d\n", __func__, ret); + return -EREMOTEIO; + } + return 0; +} + +static int friio_frontend_attach(struct dvb_usb_adapter *adap) +{ + if (friio_initialize(adap->dev) < 0) + return -EIO; + + adap->fe_adap[0].fe = jdvbt90502_attach(adap->dev); + if (adap->fe_adap[0].fe == NULL) + return -EIO; + + return 0; +} + +/* DVB USB Driver stuff */ +static struct dvb_usb_device_properties friio_properties; + +static int friio_probe(struct usb_interface *intf, + const struct usb_device_id *id) +{ + struct dvb_usb_device *d; + struct usb_host_interface *alt; + int ret; + + if (intf->num_altsetting < GL861_ALTSETTING_COUNT) + return -ENODEV; + + alt = usb_altnum_to_altsetting(intf, FRIIO_BULK_ALTSETTING); + if (alt == NULL) { + deb_rc("not alt found!\n"); + return -ENODEV; + } + ret = usb_set_interface(interface_to_usbdev(intf), + alt->desc.bInterfaceNumber, + alt->desc.bAlternateSetting); + if (ret != 0) { + deb_rc("failed to set alt-setting!\n"); + return ret; + } + + ret = dvb_usb_device_init(intf, &friio_properties, + THIS_MODULE, &d, adapter_nr); + if (ret == 0) + friio_streaming_ctrl(&d->adapter[0], 1); + + return ret; +} + + +struct jdvbt90502_config friio_fe_config = { + .demod_address = FRIIO_DEMOD_ADDR, + .pll_address = FRIIO_PLL_ADDR, +}; + +static struct i2c_algorithm gl861_i2c_algo = { + .master_xfer = gl861_i2c_xfer, + .functionality = gl861_i2c_func, +}; + +static struct usb_device_id friio_table[] = { + { USB_DEVICE(USB_VID_774, USB_PID_FRIIO_WHITE) }, + { } /* Terminating entry */ +}; +MODULE_DEVICE_TABLE(usb, friio_table); + + +static struct dvb_usb_device_properties friio_properties = { + .caps = DVB_USB_IS_AN_I2C_ADAPTER, + .usb_ctrl = DEVICE_SPECIFIC, + + .size_of_priv = 0, + + .num_adapters = 1, + .adapter = { + /* caps:0 => no pid filter, 188B TS packet */ + /* GL861 has a HW pid filter, but no info available. */ + { + .num_frontends = 1, + .fe = {{ + .caps = 0, + + .frontend_attach = friio_frontend_attach, + .streaming_ctrl = friio_streaming_ctrl, + + .stream = { + .type = USB_BULK, + /* count <= MAX_NO_URBS_FOR_DATA_STREAM(10) */ + .count = 8, + .endpoint = 0x01, + .u = { + /* GL861 has 6KB buf inside */ + .bulk = { + .buffersize = 16384, + } + } + }, + }}, + } + }, + .i2c_algo = &gl861_i2c_algo, + + .num_device_descs = 1, + .devices = { + { + .name = "774 Friio ISDB-T USB2.0", + .cold_ids = { NULL }, + .warm_ids = { &friio_table[0], NULL }, + }, + } +}; + +static struct usb_driver friio_driver = { + .name = "dvb_usb_friio", + .probe = friio_probe, + .disconnect = dvb_usb_device_exit, + .id_table = friio_table, +}; + +module_usb_driver(friio_driver); + +MODULE_AUTHOR("Akihiro Tsukada <tskd2@yahoo.co.jp>"); +MODULE_DESCRIPTION("Driver for Friio ISDB-T USB2.0 Receiver"); +MODULE_VERSION("0.2"); +MODULE_LICENSE("GPL"); |