summaryrefslogtreecommitdiffstats
path: root/kernel/drivers/media/usb/dvb-usb-v2
diff options
context:
space:
mode:
Diffstat (limited to 'kernel/drivers/media/usb/dvb-usb-v2')
-rw-r--r--kernel/drivers/media/usb/dvb-usb-v2/Kconfig153
-rw-r--r--kernel/drivers/media/usb/dvb-usb-v2/Makefile46
-rw-r--r--kernel/drivers/media/usb/dvb-usb-v2/af9015.c1504
-rw-r--r--kernel/drivers/media/usb/dvb-usb-v2/af9015.h153
-rw-r--r--kernel/drivers/media/usb/dvb-usb-v2/af9035.c2088
-rw-r--r--kernel/drivers/media/usb/dvb-usb-v2/af9035.h150
-rw-r--r--kernel/drivers/media/usb/dvb-usb-v2/anysee.c1442
-rw-r--r--kernel/drivers/media/usb/dvb-usb-v2/anysee.h330
-rw-r--r--kernel/drivers/media/usb/dvb-usb-v2/au6610.c213
-rw-r--r--kernel/drivers/media/usb/dvb-usb-v2/au6610.h32
-rw-r--r--kernel/drivers/media/usb/dvb-usb-v2/az6007.c985
-rw-r--r--kernel/drivers/media/usb/dvb-usb-v2/ce6230.c292
-rw-r--r--kernel/drivers/media/usb/dvb-usb-v2/ce6230.h50
-rw-r--r--kernel/drivers/media/usb/dvb-usb-v2/dvb_usb.h412
-rw-r--r--kernel/drivers/media/usb/dvb-usb-v2/dvb_usb_common.h35
-rw-r--r--kernel/drivers/media/usb/dvb-usb-v2/dvb_usb_core.c1123
-rw-r--r--kernel/drivers/media/usb/dvb-usb-v2/dvb_usb_urb.c104
-rw-r--r--kernel/drivers/media/usb/dvb-usb-v2/dvbsky.c864
-rw-r--r--kernel/drivers/media/usb/dvb-usb-v2/ec168.c385
-rw-r--r--kernel/drivers/media/usb/dvb-usb-v2/ec168.h53
-rw-r--r--kernel/drivers/media/usb/dvb-usb-v2/gl861.c177
-rw-r--r--kernel/drivers/media/usb/dvb-usb-v2/gl861.h12
-rw-r--r--kernel/drivers/media/usb/dvb-usb-v2/lmedm04.c1307
-rw-r--r--kernel/drivers/media/usb/dvb-usb-v2/lmedm04.h175
-rw-r--r--kernel/drivers/media/usb/dvb-usb-v2/mxl111sf-demod.c606
-rw-r--r--kernel/drivers/media/usb/dvb-usb-v2/mxl111sf-demod.h49
-rw-r--r--kernel/drivers/media/usb/dvb-usb-v2/mxl111sf-gpio.c757
-rw-r--r--kernel/drivers/media/usb/dvb-usb-v2/mxl111sf-gpio.h50
-rw-r--r--kernel/drivers/media/usb/dvb-usb-v2/mxl111sf-i2c.c844
-rw-r--r--kernel/drivers/media/usb/dvb-usb-v2/mxl111sf-i2c.h29
-rw-r--r--kernel/drivers/media/usb/dvb-usb-v2/mxl111sf-phy.c337
-rw-r--r--kernel/drivers/media/usb/dvb-usb-v2/mxl111sf-phy.h47
-rw-r--r--kernel/drivers/media/usb/dvb-usb-v2/mxl111sf-reg.h173
-rw-r--r--kernel/drivers/media/usb/dvb-usb-v2/mxl111sf-tuner.c517
-rw-r--r--kernel/drivers/media/usb/dvb-usb-v2/mxl111sf-tuner.h79
-rw-r--r--kernel/drivers/media/usb/dvb-usb-v2/mxl111sf.c1427
-rw-r--r--kernel/drivers/media/usb/dvb-usb-v2/mxl111sf.h154
-rw-r--r--kernel/drivers/media/usb/dvb-usb-v2/rtl28xxu.c1788
-rw-r--r--kernel/drivers/media/usb/dvb-usb-v2/rtl28xxu.h285
-rw-r--r--kernel/drivers/media/usb/dvb-usb-v2/usb_urb.c362
40 files changed, 19589 insertions, 0 deletions
diff --git a/kernel/drivers/media/usb/dvb-usb-v2/Kconfig b/kernel/drivers/media/usb/dvb-usb-v2/Kconfig
new file mode 100644
index 000000000..9facc92c8
--- /dev/null
+++ b/kernel/drivers/media/usb/dvb-usb-v2/Kconfig
@@ -0,0 +1,153 @@
+config DVB_USB_V2
+ tristate "Support for various USB DVB devices v2"
+ depends on DVB_CORE && USB && I2C && (RC_CORE || RC_CORE=n)
+ help
+ By enabling this you will be able to choose the various supported
+ USB1.1 and USB2.0 DVB devices.
+
+ Almost every USB device needs a firmware, please look into
+ <file:Documentation/dvb/README.dvb-usb>.
+
+ For a complete list of supported USB devices see the LinuxTV DVB Wiki:
+ <http://www.linuxtv.org/wiki/index.php/DVB_USB>
+
+ Say Y if you own a USB DVB device.
+
+config DVB_USB_AF9015
+ tristate "Afatech AF9015 DVB-T USB2.0 support"
+ depends on DVB_USB_V2
+ select DVB_AF9013
+ select DVB_PLL if MEDIA_SUBDRV_AUTOSELECT
+ select MEDIA_TUNER_MT2060 if MEDIA_SUBDRV_AUTOSELECT
+ select MEDIA_TUNER_QT1010 if MEDIA_SUBDRV_AUTOSELECT
+ select MEDIA_TUNER_TDA18271 if MEDIA_SUBDRV_AUTOSELECT
+ select MEDIA_TUNER_MXL5005S if MEDIA_SUBDRV_AUTOSELECT
+ select MEDIA_TUNER_MC44S803 if MEDIA_SUBDRV_AUTOSELECT
+ select MEDIA_TUNER_TDA18218 if MEDIA_SUBDRV_AUTOSELECT
+ select MEDIA_TUNER_MXL5007T if MEDIA_SUBDRV_AUTOSELECT
+ help
+ Say Y here to support the Afatech AF9015 based DVB-T USB2.0 receiver
+
+config DVB_USB_AF9035
+ tristate "Afatech AF9035 DVB-T USB2.0 support"
+ depends on DVB_USB_V2
+ select DVB_AF9033
+ select MEDIA_TUNER_TUA9001 if MEDIA_SUBDRV_AUTOSELECT
+ select MEDIA_TUNER_FC0011 if MEDIA_SUBDRV_AUTOSELECT
+ select MEDIA_TUNER_MXL5007T if MEDIA_SUBDRV_AUTOSELECT
+ select MEDIA_TUNER_TDA18218 if MEDIA_SUBDRV_AUTOSELECT
+ select MEDIA_TUNER_FC2580 if MEDIA_SUBDRV_AUTOSELECT
+ select MEDIA_TUNER_IT913X if MEDIA_SUBDRV_AUTOSELECT
+ help
+ Say Y here to support the Afatech AF9035 based DVB USB receiver.
+
+config DVB_USB_ANYSEE
+ tristate "Anysee DVB-T/C USB2.0 support"
+ depends on DVB_USB_V2
+ select DVB_PLL if MEDIA_SUBDRV_AUTOSELECT
+ select DVB_MT352 if MEDIA_SUBDRV_AUTOSELECT
+ select DVB_ZL10353 if MEDIA_SUBDRV_AUTOSELECT
+ select DVB_TDA10023 if MEDIA_SUBDRV_AUTOSELECT
+ select MEDIA_TUNER_TDA18212 if MEDIA_SUBDRV_AUTOSELECT
+ select DVB_CX24116 if MEDIA_SUBDRV_AUTOSELECT
+ select DVB_STV0900 if MEDIA_SUBDRV_AUTOSELECT
+ select DVB_STV6110 if MEDIA_SUBDRV_AUTOSELECT
+ select DVB_ISL6423 if MEDIA_SUBDRV_AUTOSELECT
+ select DVB_CXD2820R if MEDIA_SUBDRV_AUTOSELECT
+ help
+ Say Y here to support the Anysee E30, Anysee E30 Plus or
+ Anysee E30 C Plus DVB USB2.0 receiver.
+
+config DVB_USB_AU6610
+ tristate "Alcor Micro AU6610 USB2.0 support"
+ depends on DVB_USB_V2
+ select DVB_ZL10353 if MEDIA_SUBDRV_AUTOSELECT
+ select MEDIA_TUNER_QT1010 if MEDIA_SUBDRV_AUTOSELECT
+ help
+ Say Y here to support the Sigmatek DVB-110 DVB-T USB2.0 receiver.
+
+config DVB_USB_AZ6007
+ tristate "AzureWave 6007 and clones DVB-T/C USB2.0 support"
+ depends on DVB_USB_V2
+ select CYPRESS_FIRMWARE
+ select DVB_DRXK if MEDIA_SUBDRV_AUTOSELECT
+ select MEDIA_TUNER_MT2063 if MEDIA_SUBDRV_AUTOSELECT
+ help
+ Say Y here to support the AZ6007 receivers like Terratec H7.
+
+config DVB_USB_CE6230
+ tristate "Intel CE6230 DVB-T USB2.0 support"
+ depends on DVB_USB_V2
+ select DVB_ZL10353
+ select MEDIA_TUNER_MXL5005S if MEDIA_SUBDRV_AUTOSELECT
+ help
+ Say Y here to support the Intel CE6230 DVB-T USB2.0 receiver
+
+config DVB_USB_EC168
+ tristate "E3C EC168 DVB-T USB2.0 support"
+ depends on DVB_USB_V2
+ select DVB_EC100
+ select MEDIA_TUNER_MXL5005S if MEDIA_SUBDRV_AUTOSELECT
+ help
+ Say Y here to support the E3C EC168 DVB-T USB2.0 receiver.
+
+config DVB_USB_GL861
+ tristate "Genesys Logic GL861 USB2.0 support"
+ depends on DVB_USB_V2
+ select DVB_ZL10353 if MEDIA_SUBDRV_AUTOSELECT
+ select MEDIA_TUNER_QT1010 if MEDIA_SUBDRV_AUTOSELECT
+ help
+ Say Y here to support the MSI Megasky 580 (55801) DVB-T USB2.0
+ receiver with USB ID 0db0:5581.
+
+config DVB_USB_LME2510
+ tristate "LME DM04/QQBOX DVB-S USB2.0 support"
+ depends on DVB_USB_V2
+ depends on RC_CORE
+ select DVB_TDA10086 if MEDIA_SUBDRV_AUTOSELECT
+ select DVB_TDA826X if MEDIA_SUBDRV_AUTOSELECT
+ select DVB_STV0288 if MEDIA_SUBDRV_AUTOSELECT
+ select DVB_IX2505V if MEDIA_SUBDRV_AUTOSELECT
+ select DVB_STV0299 if MEDIA_SUBDRV_AUTOSELECT
+ select DVB_PLL if MEDIA_SUBDRV_AUTOSELECT
+ select DVB_M88RS2000 if MEDIA_SUBDRV_AUTOSELECT
+ select DVB_TS2020 if MEDIA_SUBDRV_AUTOSELECT
+ help
+ Say Y here to support the LME DM04/QQBOX DVB-S USB2.0
+
+config DVB_USB_MXL111SF
+ tristate "MxL111SF DTV USB2.0 support"
+ depends on DVB_USB_V2
+ select DVB_LGDT3305 if MEDIA_SUBDRV_AUTOSELECT
+ select DVB_LG2160 if MEDIA_SUBDRV_AUTOSELECT
+ select VIDEO_TVEEPROM
+ help
+ Say Y here to support the MxL111SF USB2.0 DTV receiver.
+
+config DVB_USB_RTL28XXU
+ tristate "Realtek RTL28xxU DVB USB support"
+ depends on DVB_USB_V2 && I2C_MUX
+ select DVB_RTL2830
+ select DVB_RTL2832
+ select DVB_RTL2832_SDR if (MEDIA_SUBDRV_AUTOSELECT && MEDIA_SDR_SUPPORT)
+ select MEDIA_TUNER_QT1010 if MEDIA_SUBDRV_AUTOSELECT
+ select MEDIA_TUNER_MT2060 if MEDIA_SUBDRV_AUTOSELECT
+ select MEDIA_TUNER_MXL5005S if MEDIA_SUBDRV_AUTOSELECT
+ select MEDIA_TUNER_FC0012 if MEDIA_SUBDRV_AUTOSELECT
+ select MEDIA_TUNER_FC0013 if MEDIA_SUBDRV_AUTOSELECT
+ select MEDIA_TUNER_E4000 if MEDIA_SUBDRV_AUTOSELECT
+ select MEDIA_TUNER_FC2580 if MEDIA_SUBDRV_AUTOSELECT
+ select MEDIA_TUNER_R820T if MEDIA_SUBDRV_AUTOSELECT
+ help
+ Say Y here to support the Realtek RTL28xxU DVB USB receiver.
+
+config DVB_USB_DVBSKY
+ tristate "DVBSky USB support"
+ depends on DVB_USB_V2
+ select DVB_M88DS3103 if MEDIA_SUBDRV_AUTOSELECT
+ select DVB_SI2168 if MEDIA_SUBDRV_AUTOSELECT
+ select DVB_TS2020 if MEDIA_SUBDRV_AUTOSELECT
+ select MEDIA_TUNER_SI2157 if MEDIA_SUBDRV_AUTOSELECT
+ select DVB_SP2 if MEDIA_SUBDRV_AUTOSELECT
+ help
+ Say Y here to support the USB receivers from DVBSky.
diff --git a/kernel/drivers/media/usb/dvb-usb-v2/Makefile b/kernel/drivers/media/usb/dvb-usb-v2/Makefile
new file mode 100644
index 000000000..f10d4df0e
--- /dev/null
+++ b/kernel/drivers/media/usb/dvb-usb-v2/Makefile
@@ -0,0 +1,46 @@
+dvb_usb_v2-objs := dvb_usb_core.o dvb_usb_urb.o usb_urb.o
+obj-$(CONFIG_DVB_USB_V2) += dvb_usb_v2.o
+
+dvb-usb-af9015-objs := af9015.o
+obj-$(CONFIG_DVB_USB_AF9015) += dvb-usb-af9015.o
+
+dvb-usb-af9035-objs := af9035.o
+obj-$(CONFIG_DVB_USB_AF9035) += dvb-usb-af9035.o
+
+dvb-usb-anysee-objs := anysee.o
+obj-$(CONFIG_DVB_USB_ANYSEE) += dvb-usb-anysee.o
+
+dvb-usb-au6610-objs := au6610.o
+obj-$(CONFIG_DVB_USB_AU6610) += dvb-usb-au6610.o
+
+dvb-usb-az6007-objs := az6007.o
+obj-$(CONFIG_DVB_USB_AZ6007) += dvb-usb-az6007.o
+
+dvb-usb-ce6230-objs := ce6230.o
+obj-$(CONFIG_DVB_USB_CE6230) += dvb-usb-ce6230.o
+
+dvb-usb-ec168-objs := ec168.o
+obj-$(CONFIG_DVB_USB_EC168) += dvb-usb-ec168.o
+
+dvb-usb-lmedm04-objs := lmedm04.o
+obj-$(CONFIG_DVB_USB_LME2510) += dvb-usb-lmedm04.o
+
+dvb-usb-gl861-objs := gl861.o
+obj-$(CONFIG_DVB_USB_GL861) += dvb-usb-gl861.o
+
+dvb-usb-mxl111sf-objs += mxl111sf.o mxl111sf-phy.o mxl111sf-i2c.o
+dvb-usb-mxl111sf-objs += mxl111sf-gpio.o
+obj-$(CONFIG_DVB_USB_MXL111SF) += dvb-usb-mxl111sf.o
+obj-$(CONFIG_DVB_USB_MXL111SF) += mxl111sf-demod.o
+obj-$(CONFIG_DVB_USB_MXL111SF) += mxl111sf-tuner.o
+
+dvb-usb-rtl28xxu-objs := rtl28xxu.o
+obj-$(CONFIG_DVB_USB_RTL28XXU) += dvb-usb-rtl28xxu.o
+
+dvb-usb-dvbsky-objs := dvbsky.o
+obj-$(CONFIG_DVB_USB_DVBSKY) += dvb-usb-dvbsky.o
+
+ccflags-y += -I$(srctree)/drivers/media/dvb-core
+ccflags-y += -I$(srctree)/drivers/media/dvb-frontends
+ccflags-y += -I$(srctree)/drivers/media/tuners
+ccflags-y += -I$(srctree)/drivers/media/common
diff --git a/kernel/drivers/media/usb/dvb-usb-v2/af9015.c b/kernel/drivers/media/usb/dvb-usb-v2/af9015.c
new file mode 100644
index 000000000..16c0b7d4f
--- /dev/null
+++ b/kernel/drivers/media/usb/dvb-usb-v2/af9015.c
@@ -0,0 +1,1504 @@
+/*
+ * DVB USB Linux driver for Afatech AF9015 DVB-T USB2.0 receiver
+ *
+ * Copyright (C) 2007 Antti Palosaari <crope@iki.fi>
+ *
+ * Thanks to Afatech who kindly provided information.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+
+#include "af9015.h"
+
+static int dvb_usb_af9015_remote;
+module_param_named(remote, dvb_usb_af9015_remote, int, 0644);
+MODULE_PARM_DESC(remote, "select remote");
+DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
+
+static int af9015_ctrl_msg(struct dvb_usb_device *d, struct req_t *req)
+{
+#define REQ_HDR_LEN 8 /* send header size */
+#define ACK_HDR_LEN 2 /* rece header size */
+ struct af9015_state *state = d_to_priv(d);
+ int ret, wlen, rlen;
+ u8 write = 1;
+
+ mutex_lock(&d->usb_mutex);
+
+ state->buf[0] = req->cmd;
+ state->buf[1] = state->seq++;
+ state->buf[2] = req->i2c_addr;
+ state->buf[3] = req->addr >> 8;
+ state->buf[4] = req->addr & 0xff;
+ state->buf[5] = req->mbox;
+ state->buf[6] = req->addr_len;
+ state->buf[7] = req->data_len;
+
+ switch (req->cmd) {
+ case GET_CONFIG:
+ case READ_MEMORY:
+ case RECONNECT_USB:
+ write = 0;
+ break;
+ case READ_I2C:
+ write = 0;
+ state->buf[2] |= 0x01; /* set I2C direction */
+ case WRITE_I2C:
+ state->buf[0] = READ_WRITE_I2C;
+ break;
+ case WRITE_MEMORY:
+ if (((req->addr & 0xff00) == 0xff00) ||
+ ((req->addr & 0xff00) == 0xae00))
+ state->buf[0] = WRITE_VIRTUAL_MEMORY;
+ case WRITE_VIRTUAL_MEMORY:
+ case COPY_FIRMWARE:
+ case DOWNLOAD_FIRMWARE:
+ case BOOT:
+ break;
+ default:
+ dev_err(&d->udev->dev, "%s: unknown command=%d\n",
+ KBUILD_MODNAME, req->cmd);
+ ret = -EIO;
+ goto error;
+ }
+
+ /* buffer overflow check */
+ if ((write && (req->data_len > BUF_LEN - REQ_HDR_LEN)) ||
+ (!write && (req->data_len > BUF_LEN - ACK_HDR_LEN))) {
+ dev_err(&d->udev->dev, "%s: too much data; cmd=%d len=%d\n",
+ KBUILD_MODNAME, req->cmd, req->data_len);
+ ret = -EINVAL;
+ goto error;
+ }
+
+ /* write receives seq + status = 2 bytes
+ read receives seq + status + data = 2 + N bytes */
+ wlen = REQ_HDR_LEN;
+ rlen = ACK_HDR_LEN;
+ if (write) {
+ wlen += req->data_len;
+ memcpy(&state->buf[REQ_HDR_LEN], req->data, req->data_len);
+ } else {
+ rlen += req->data_len;
+ }
+
+ /* no ack for these packets */
+ if (req->cmd == DOWNLOAD_FIRMWARE || req->cmd == RECONNECT_USB)
+ rlen = 0;
+
+ ret = dvb_usbv2_generic_rw_locked(d,
+ state->buf, wlen, state->buf, rlen);
+ if (ret)
+ goto error;
+
+ /* check status */
+ if (rlen && state->buf[1]) {
+ dev_err(&d->udev->dev, "%s: command failed=%d\n",
+ KBUILD_MODNAME, state->buf[1]);
+ ret = -EIO;
+ goto error;
+ }
+
+ /* read request, copy returned data to return buf */
+ if (!write)
+ memcpy(req->data, &state->buf[ACK_HDR_LEN], req->data_len);
+error:
+ mutex_unlock(&d->usb_mutex);
+
+ return ret;
+}
+
+static int af9015_write_regs(struct dvb_usb_device *d, u16 addr, u8 *val,
+ u8 len)
+{
+ struct req_t req = {WRITE_MEMORY, AF9015_I2C_DEMOD, addr, 0, 0, len,
+ val};
+ return af9015_ctrl_msg(d, &req);
+}
+
+static int af9015_read_regs(struct dvb_usb_device *d, u16 addr, u8 *val, u8 len)
+{
+ struct req_t req = {READ_MEMORY, AF9015_I2C_DEMOD, addr, 0, 0, len,
+ val};
+ return af9015_ctrl_msg(d, &req);
+}
+
+static int af9015_write_reg(struct dvb_usb_device *d, u16 addr, u8 val)
+{
+ return af9015_write_regs(d, addr, &val, 1);
+}
+
+static int af9015_read_reg(struct dvb_usb_device *d, u16 addr, u8 *val)
+{
+ return af9015_read_regs(d, addr, val, 1);
+}
+
+static int af9015_write_reg_i2c(struct dvb_usb_device *d, u8 addr, u16 reg,
+ u8 val)
+{
+ struct af9015_state *state = d_to_priv(d);
+ struct req_t req = {WRITE_I2C, addr, reg, 1, 1, 1, &val};
+
+ if (addr == state->af9013_config[0].i2c_addr ||
+ addr == state->af9013_config[1].i2c_addr)
+ req.addr_len = 3;
+
+ return af9015_ctrl_msg(d, &req);
+}
+
+static int af9015_read_reg_i2c(struct dvb_usb_device *d, u8 addr, u16 reg,
+ u8 *val)
+{
+ struct af9015_state *state = d_to_priv(d);
+ struct req_t req = {READ_I2C, addr, reg, 0, 1, 1, val};
+
+ if (addr == state->af9013_config[0].i2c_addr ||
+ addr == state->af9013_config[1].i2c_addr)
+ req.addr_len = 3;
+
+ return af9015_ctrl_msg(d, &req);
+}
+
+static int af9015_do_reg_bit(struct dvb_usb_device *d, u16 addr, u8 bit, u8 op)
+{
+ int ret;
+ u8 val, mask = 0x01;
+
+ ret = af9015_read_reg(d, addr, &val);
+ if (ret)
+ return ret;
+
+ mask <<= bit;
+ if (op) {
+ /* set bit */
+ val |= mask;
+ } else {
+ /* clear bit */
+ mask ^= 0xff;
+ val &= mask;
+ }
+
+ return af9015_write_reg(d, addr, val);
+}
+
+static int af9015_set_reg_bit(struct dvb_usb_device *d, u16 addr, u8 bit)
+{
+ return af9015_do_reg_bit(d, addr, bit, 1);
+}
+
+static int af9015_clear_reg_bit(struct dvb_usb_device *d, u16 addr, u8 bit)
+{
+ return af9015_do_reg_bit(d, addr, bit, 0);
+}
+
+static int af9015_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msg[],
+ int num)
+{
+ struct dvb_usb_device *d = i2c_get_adapdata(adap);
+ struct af9015_state *state = d_to_priv(d);
+ int ret = 0, i = 0;
+ u16 addr;
+ u8 uninitialized_var(mbox), addr_len;
+ struct req_t req;
+
+/*
+The bus lock is needed because there is two tuners both using same I2C-address.
+Due to that the only way to select correct tuner is use demodulator I2C-gate.
+
+................................................
+. AF9015 includes integrated AF9013 demodulator.
+. ____________ ____________ . ____________
+.| uC | | demod | . | tuner |
+.|------------| |------------| . |------------|
+.| AF9015 | | AF9013/5 | . | MXL5003 |
+.| |--+----I2C-------|-----/ -----|-.-----I2C-------| |
+.| | | | addr 0x38 | . | addr 0xc6 |
+.|____________| | |____________| . |____________|
+.................|..............................
+ | ____________ ____________
+ | | demod | | tuner |
+ | |------------| |------------|
+ | | AF9013 | | MXL5003 |
+ +----I2C-------|-----/ -----|-------I2C-------| |
+ | addr 0x3a | | addr 0xc6 |
+ |____________| |____________|
+*/
+ if (mutex_lock_interruptible(&d->i2c_mutex) < 0)
+ return -EAGAIN;
+
+ while (i < num) {
+ if (msg[i].addr == state->af9013_config[0].i2c_addr ||
+ msg[i].addr == state->af9013_config[1].i2c_addr) {
+ addr = msg[i].buf[0] << 8;
+ addr += msg[i].buf[1];
+ mbox = msg[i].buf[2];
+ addr_len = 3;
+ } else {
+ addr = msg[i].buf[0];
+ addr_len = 1;
+ /* mbox is don't care in that case */
+ }
+
+ if (num > i + 1 && (msg[i+1].flags & I2C_M_RD)) {
+ if (msg[i].len > 3 || msg[i+1].len > 61) {
+ ret = -EOPNOTSUPP;
+ goto error;
+ }
+ if (msg[i].addr == state->af9013_config[0].i2c_addr)
+ req.cmd = READ_MEMORY;
+ else
+ req.cmd = READ_I2C;
+ req.i2c_addr = msg[i].addr;
+ req.addr = addr;
+ req.mbox = mbox;
+ req.addr_len = addr_len;
+ req.data_len = msg[i+1].len;
+ req.data = &msg[i+1].buf[0];
+ ret = af9015_ctrl_msg(d, &req);
+ i += 2;
+ } else if (msg[i].flags & I2C_M_RD) {
+ if (msg[i].len > 61) {
+ ret = -EOPNOTSUPP;
+ goto error;
+ }
+ if (msg[i].addr == state->af9013_config[0].i2c_addr) {
+ ret = -EINVAL;
+ goto error;
+ }
+ req.cmd = READ_I2C;
+ req.i2c_addr = msg[i].addr;
+ req.addr = addr;
+ req.mbox = mbox;
+ req.addr_len = addr_len;
+ req.data_len = msg[i].len;
+ req.data = &msg[i].buf[0];
+ ret = af9015_ctrl_msg(d, &req);
+ i += 1;
+ } else {
+ if (msg[i].len > 21) {
+ ret = -EOPNOTSUPP;
+ goto error;
+ }
+ if (msg[i].addr == state->af9013_config[0].i2c_addr)
+ req.cmd = WRITE_MEMORY;
+ else
+ req.cmd = WRITE_I2C;
+ req.i2c_addr = msg[i].addr;
+ req.addr = addr;
+ req.mbox = mbox;
+ req.addr_len = addr_len;
+ req.data_len = msg[i].len-addr_len;
+ req.data = &msg[i].buf[addr_len];
+ ret = af9015_ctrl_msg(d, &req);
+ i += 1;
+ }
+ if (ret)
+ goto error;
+
+ }
+ ret = i;
+
+error:
+ mutex_unlock(&d->i2c_mutex);
+
+ return ret;
+}
+
+static u32 af9015_i2c_func(struct i2c_adapter *adapter)
+{
+ return I2C_FUNC_I2C;
+}
+
+static struct i2c_algorithm af9015_i2c_algo = {
+ .master_xfer = af9015_i2c_xfer,
+ .functionality = af9015_i2c_func,
+};
+
+static int af9015_identify_state(struct dvb_usb_device *d, const char **name)
+{
+ int ret;
+ u8 reply;
+ struct req_t req = {GET_CONFIG, 0, 0, 0, 0, 1, &reply};
+
+ ret = af9015_ctrl_msg(d, &req);
+ if (ret)
+ return ret;
+
+ dev_dbg(&d->udev->dev, "%s: reply=%02x\n", __func__, reply);
+
+ if (reply == 0x02)
+ ret = WARM;
+ else
+ ret = COLD;
+
+ return ret;
+}
+
+static int af9015_download_firmware(struct dvb_usb_device *d,
+ const struct firmware *fw)
+{
+ struct af9015_state *state = d_to_priv(d);
+ int i, len, remaining, ret;
+ struct req_t req = {DOWNLOAD_FIRMWARE, 0, 0, 0, 0, 0, NULL};
+ u16 checksum = 0;
+ dev_dbg(&d->udev->dev, "%s:\n", __func__);
+
+ /* calc checksum */
+ for (i = 0; i < fw->size; i++)
+ checksum += fw->data[i];
+
+ state->firmware_size = fw->size;
+ state->firmware_checksum = checksum;
+
+ #define FW_ADDR 0x5100 /* firmware start address */
+ #define LEN_MAX 55 /* max packet size */
+ for (remaining = fw->size; remaining > 0; remaining -= LEN_MAX) {
+ len = remaining;
+ if (len > LEN_MAX)
+ len = LEN_MAX;
+
+ req.data_len = len;
+ req.data = (u8 *) &fw->data[fw->size - remaining];
+ req.addr = FW_ADDR + fw->size - remaining;
+
+ ret = af9015_ctrl_msg(d, &req);
+ if (ret) {
+ dev_err(&d->udev->dev,
+ "%s: firmware download failed=%d\n",
+ KBUILD_MODNAME, ret);
+ goto error;
+ }
+ }
+
+ /* firmware loaded, request boot */
+ req.cmd = BOOT;
+ req.data_len = 0;
+ ret = af9015_ctrl_msg(d, &req);
+ if (ret) {
+ dev_err(&d->udev->dev, "%s: firmware boot failed=%d\n",
+ KBUILD_MODNAME, ret);
+ goto error;
+ }
+
+error:
+ return ret;
+}
+
+#define AF9015_EEPROM_SIZE 256
+
+/* hash (and dump) eeprom */
+static int af9015_eeprom_hash(struct dvb_usb_device *d)
+{
+ struct af9015_state *state = d_to_priv(d);
+ int ret, i;
+ u8 buf[AF9015_EEPROM_SIZE];
+ struct req_t req = {READ_I2C, AF9015_I2C_EEPROM, 0, 0, 1, 1, NULL};
+
+ /* read eeprom */
+ for (i = 0; i < AF9015_EEPROM_SIZE; i++) {
+ req.addr = i;
+ req.data = &buf[i];
+ ret = af9015_ctrl_msg(d, &req);
+ if (ret < 0)
+ goto err;
+ }
+
+ /* calculate checksum */
+ for (i = 0; i < AF9015_EEPROM_SIZE / sizeof(u32); i++) {
+ state->eeprom_sum *= GOLDEN_RATIO_PRIME_32;
+ state->eeprom_sum += le32_to_cpu(((__le32 *)buf)[i]);
+ }
+
+ for (i = 0; i < AF9015_EEPROM_SIZE; i += 16)
+ dev_dbg(&d->udev->dev, "%s: %*ph\n", __func__, 16, buf + i);
+
+ dev_dbg(&d->udev->dev, "%s: eeprom sum=%.8x\n",
+ __func__, state->eeprom_sum);
+ return 0;
+err:
+ dev_err(&d->udev->dev, "%s: eeprom failed=%d\n", KBUILD_MODNAME, ret);
+ return ret;
+}
+
+static int af9015_read_config(struct dvb_usb_device *d)
+{
+ struct af9015_state *state = d_to_priv(d);
+ int ret;
+ u8 val, i, offset = 0;
+ struct req_t req = {READ_I2C, AF9015_I2C_EEPROM, 0, 0, 1, 1, &val};
+
+ dev_dbg(&d->udev->dev, "%s:\n", __func__);
+
+ /* IR remote controller */
+ req.addr = AF9015_EEPROM_IR_MODE;
+ /* first message will timeout often due to possible hw bug */
+ for (i = 0; i < 4; i++) {
+ ret = af9015_ctrl_msg(d, &req);
+ if (!ret)
+ break;
+ }
+ if (ret)
+ goto error;
+
+ ret = af9015_eeprom_hash(d);
+ if (ret)
+ goto error;
+
+ state->ir_mode = val;
+ dev_dbg(&d->udev->dev, "%s: IR mode=%d\n", __func__, val);
+
+ /* TS mode - one or two receivers */
+ req.addr = AF9015_EEPROM_TS_MODE;
+ ret = af9015_ctrl_msg(d, &req);
+ if (ret)
+ goto error;
+
+ state->dual_mode = val;
+ dev_dbg(&d->udev->dev, "%s: TS mode=%d\n", __func__, state->dual_mode);
+
+ /* disable 2nd adapter because we don't have PID-filters */
+ if (d->udev->speed == USB_SPEED_FULL)
+ state->dual_mode = 0;
+
+ if (state->dual_mode) {
+ /* read 2nd demodulator I2C address */
+ req.addr = AF9015_EEPROM_DEMOD2_I2C;
+ ret = af9015_ctrl_msg(d, &req);
+ if (ret)
+ goto error;
+
+ state->af9013_config[1].i2c_addr = val;
+ }
+
+ for (i = 0; i < state->dual_mode + 1; i++) {
+ if (i == 1)
+ offset = AF9015_EEPROM_OFFSET;
+ /* xtal */
+ req.addr = AF9015_EEPROM_XTAL_TYPE1 + offset;
+ ret = af9015_ctrl_msg(d, &req);
+ if (ret)
+ goto error;
+ switch (val) {
+ case 0:
+ state->af9013_config[i].clock = 28800000;
+ break;
+ case 1:
+ state->af9013_config[i].clock = 20480000;
+ break;
+ case 2:
+ state->af9013_config[i].clock = 28000000;
+ break;
+ case 3:
+ state->af9013_config[i].clock = 25000000;
+ break;
+ }
+ dev_dbg(&d->udev->dev, "%s: [%d] xtal=%d set clock=%d\n",
+ __func__, i, val,
+ state->af9013_config[i].clock);
+
+ /* IF frequency */
+ req.addr = AF9015_EEPROM_IF1H + offset;
+ ret = af9015_ctrl_msg(d, &req);
+ if (ret)
+ goto error;
+
+ state->af9013_config[i].if_frequency = val << 8;
+
+ req.addr = AF9015_EEPROM_IF1L + offset;
+ ret = af9015_ctrl_msg(d, &req);
+ if (ret)
+ goto error;
+
+ state->af9013_config[i].if_frequency += val;
+ state->af9013_config[i].if_frequency *= 1000;
+ dev_dbg(&d->udev->dev, "%s: [%d] IF frequency=%d\n", __func__,
+ i, state->af9013_config[i].if_frequency);
+
+ /* MT2060 IF1 */
+ req.addr = AF9015_EEPROM_MT2060_IF1H + offset;
+ ret = af9015_ctrl_msg(d, &req);
+ if (ret)
+ goto error;
+ state->mt2060_if1[i] = val << 8;
+ req.addr = AF9015_EEPROM_MT2060_IF1L + offset;
+ ret = af9015_ctrl_msg(d, &req);
+ if (ret)
+ goto error;
+ state->mt2060_if1[i] += val;
+ dev_dbg(&d->udev->dev, "%s: [%d] MT2060 IF1=%d\n", __func__, i,
+ state->mt2060_if1[i]);
+
+ /* tuner */
+ req.addr = AF9015_EEPROM_TUNER_ID1 + offset;
+ ret = af9015_ctrl_msg(d, &req);
+ if (ret)
+ goto error;
+ switch (val) {
+ case AF9013_TUNER_ENV77H11D5:
+ case AF9013_TUNER_MT2060:
+ case AF9013_TUNER_QT1010:
+ case AF9013_TUNER_UNKNOWN:
+ case AF9013_TUNER_MT2060_2:
+ case AF9013_TUNER_TDA18271:
+ case AF9013_TUNER_QT1010A:
+ case AF9013_TUNER_TDA18218:
+ state->af9013_config[i].spec_inv = 1;
+ break;
+ case AF9013_TUNER_MXL5003D:
+ case AF9013_TUNER_MXL5005D:
+ case AF9013_TUNER_MXL5005R:
+ case AF9013_TUNER_MXL5007T:
+ state->af9013_config[i].spec_inv = 0;
+ break;
+ case AF9013_TUNER_MC44S803:
+ state->af9013_config[i].gpio[1] = AF9013_GPIO_LO;
+ state->af9013_config[i].spec_inv = 1;
+ break;
+ default:
+ dev_err(&d->udev->dev, "%s: tuner id=%d not " \
+ "supported, please report!\n",
+ KBUILD_MODNAME, val);
+ return -ENODEV;
+ }
+
+ state->af9013_config[i].tuner = val;
+ dev_dbg(&d->udev->dev, "%s: [%d] tuner id=%d\n",
+ __func__, i, val);
+ }
+
+error:
+ if (ret)
+ dev_err(&d->udev->dev, "%s: eeprom read failed=%d\n",
+ KBUILD_MODNAME, ret);
+
+ /* AverMedia AVerTV Volar Black HD (A850) device have bad EEPROM
+ content :-( Override some wrong values here. Ditto for the
+ AVerTV Red HD+ (A850T) device. */
+ if (le16_to_cpu(d->udev->descriptor.idVendor) == USB_VID_AVERMEDIA &&
+ ((le16_to_cpu(d->udev->descriptor.idProduct) ==
+ USB_PID_AVERMEDIA_A850) ||
+ (le16_to_cpu(d->udev->descriptor.idProduct) ==
+ USB_PID_AVERMEDIA_A850T))) {
+ dev_dbg(&d->udev->dev,
+ "%s: AverMedia A850: overriding config\n",
+ __func__);
+ /* disable dual mode */
+ state->dual_mode = 0;
+
+ /* set correct IF */
+ state->af9013_config[0].if_frequency = 4570000;
+ }
+
+ return ret;
+}
+
+static int af9015_get_stream_config(struct dvb_frontend *fe, u8 *ts_type,
+ struct usb_data_stream_properties *stream)
+{
+ struct dvb_usb_device *d = fe_to_d(fe);
+ dev_dbg(&d->udev->dev, "%s: adap=%d\n", __func__, fe_to_adap(fe)->id);
+
+ if (d->udev->speed == USB_SPEED_FULL)
+ stream->u.bulk.buffersize = TS_USB11_FRAME_SIZE;
+
+ return 0;
+}
+
+static int af9015_get_adapter_count(struct dvb_usb_device *d)
+{
+ struct af9015_state *state = d_to_priv(d);
+ return state->dual_mode + 1;
+}
+
+/* override demod callbacks for resource locking */
+static int af9015_af9013_set_frontend(struct dvb_frontend *fe)
+{
+ int ret;
+ struct af9015_state *state = fe_to_priv(fe);
+
+ if (mutex_lock_interruptible(&state->fe_mutex))
+ return -EAGAIN;
+
+ ret = state->set_frontend[fe_to_adap(fe)->id](fe);
+
+ mutex_unlock(&state->fe_mutex);
+
+ return ret;
+}
+
+/* override demod callbacks for resource locking */
+static int af9015_af9013_read_status(struct dvb_frontend *fe,
+ fe_status_t *status)
+{
+ int ret;
+ struct af9015_state *state = fe_to_priv(fe);
+
+ if (mutex_lock_interruptible(&state->fe_mutex))
+ return -EAGAIN;
+
+ ret = state->read_status[fe_to_adap(fe)->id](fe, status);
+
+ mutex_unlock(&state->fe_mutex);
+
+ return ret;
+}
+
+/* override demod callbacks for resource locking */
+static int af9015_af9013_init(struct dvb_frontend *fe)
+{
+ int ret;
+ struct af9015_state *state = fe_to_priv(fe);
+
+ if (mutex_lock_interruptible(&state->fe_mutex))
+ return -EAGAIN;
+
+ ret = state->init[fe_to_adap(fe)->id](fe);
+
+ mutex_unlock(&state->fe_mutex);
+
+ return ret;
+}
+
+/* override demod callbacks for resource locking */
+static int af9015_af9013_sleep(struct dvb_frontend *fe)
+{
+ int ret;
+ struct af9015_state *state = fe_to_priv(fe);
+
+ if (mutex_lock_interruptible(&state->fe_mutex))
+ return -EAGAIN;
+
+ ret = state->sleep[fe_to_adap(fe)->id](fe);
+
+ mutex_unlock(&state->fe_mutex);
+
+ return ret;
+}
+
+/* override tuner callbacks for resource locking */
+static int af9015_tuner_init(struct dvb_frontend *fe)
+{
+ int ret;
+ struct af9015_state *state = fe_to_priv(fe);
+
+ if (mutex_lock_interruptible(&state->fe_mutex))
+ return -EAGAIN;
+
+ ret = state->tuner_init[fe_to_adap(fe)->id](fe);
+
+ mutex_unlock(&state->fe_mutex);
+
+ return ret;
+}
+
+/* override tuner callbacks for resource locking */
+static int af9015_tuner_sleep(struct dvb_frontend *fe)
+{
+ int ret;
+ struct af9015_state *state = fe_to_priv(fe);
+
+ if (mutex_lock_interruptible(&state->fe_mutex))
+ return -EAGAIN;
+
+ ret = state->tuner_sleep[fe_to_adap(fe)->id](fe);
+
+ mutex_unlock(&state->fe_mutex);
+
+ return ret;
+}
+
+static int af9015_copy_firmware(struct dvb_usb_device *d)
+{
+ struct af9015_state *state = d_to_priv(d);
+ int ret;
+ u8 fw_params[4];
+ u8 val, i;
+ struct req_t req = {COPY_FIRMWARE, 0, 0x5100, 0, 0, sizeof(fw_params),
+ fw_params };
+ dev_dbg(&d->udev->dev, "%s:\n", __func__);
+
+ fw_params[0] = state->firmware_size >> 8;
+ fw_params[1] = state->firmware_size & 0xff;
+ fw_params[2] = state->firmware_checksum >> 8;
+ fw_params[3] = state->firmware_checksum & 0xff;
+
+ /* wait 2nd demodulator ready */
+ msleep(100);
+
+ ret = af9015_read_reg_i2c(d, state->af9013_config[1].i2c_addr,
+ 0x98be, &val);
+ if (ret)
+ goto error;
+ else
+ dev_dbg(&d->udev->dev, "%s: firmware status=%02x\n",
+ __func__, val);
+
+ if (val == 0x0c) /* fw is running, no need for download */
+ goto exit;
+
+ /* set I2C master clock to fast (to speed up firmware copy) */
+ ret = af9015_write_reg(d, 0xd416, 0x04); /* 0x04 * 400ns */
+ if (ret)
+ goto error;
+
+ msleep(50);
+
+ /* copy firmware */
+ ret = af9015_ctrl_msg(d, &req);
+ if (ret)
+ dev_err(&d->udev->dev, "%s: firmware copy cmd failed=%d\n",
+ KBUILD_MODNAME, ret);
+
+ dev_dbg(&d->udev->dev, "%s: firmware copy done\n", __func__);
+
+ /* set I2C master clock back to normal */
+ ret = af9015_write_reg(d, 0xd416, 0x14); /* 0x14 * 400ns */
+ if (ret)
+ goto error;
+
+ /* request boot firmware */
+ ret = af9015_write_reg_i2c(d, state->af9013_config[1].i2c_addr,
+ 0xe205, 1);
+ dev_dbg(&d->udev->dev, "%s: firmware boot cmd status=%d\n",
+ __func__, ret);
+ if (ret)
+ goto error;
+
+ for (i = 0; i < 15; i++) {
+ msleep(100);
+
+ /* check firmware status */
+ ret = af9015_read_reg_i2c(d, state->af9013_config[1].i2c_addr,
+ 0x98be, &val);
+ dev_dbg(&d->udev->dev, "%s: firmware status cmd status=%d " \
+ "firmware status=%02x\n", __func__, ret, val);
+ if (ret)
+ goto error;
+
+ if (val == 0x0c || val == 0x04) /* success or fail */
+ break;
+ }
+
+ if (val == 0x04) {
+ dev_err(&d->udev->dev, "%s: firmware did not run\n",
+ KBUILD_MODNAME);
+ ret = -ETIMEDOUT;
+ } else if (val != 0x0c) {
+ dev_err(&d->udev->dev, "%s: firmware boot timeout\n",
+ KBUILD_MODNAME);
+ ret = -ETIMEDOUT;
+ }
+
+error:
+exit:
+ return ret;
+}
+
+static int af9015_af9013_frontend_attach(struct dvb_usb_adapter *adap)
+{
+ int ret;
+ struct af9015_state *state = adap_to_priv(adap);
+
+ if (adap->id == 0) {
+ state->af9013_config[0].ts_mode = AF9013_TS_USB;
+ memcpy(state->af9013_config[0].api_version, "\x0\x1\x9\x0", 4);
+ state->af9013_config[0].gpio[0] = AF9013_GPIO_HI;
+ state->af9013_config[0].gpio[3] = AF9013_GPIO_TUNER_ON;
+ } else if (adap->id == 1) {
+ state->af9013_config[1].ts_mode = AF9013_TS_SERIAL;
+ memcpy(state->af9013_config[1].api_version, "\x0\x1\x9\x0", 4);
+ state->af9013_config[1].gpio[0] = AF9013_GPIO_TUNER_ON;
+ state->af9013_config[1].gpio[1] = AF9013_GPIO_LO;
+
+ /* copy firmware to 2nd demodulator */
+ if (state->dual_mode) {
+ ret = af9015_copy_firmware(adap_to_d(adap));
+ if (ret) {
+ dev_err(&adap_to_d(adap)->udev->dev,
+ "%s: firmware copy to 2nd " \
+ "frontend failed, will " \
+ "disable it\n", KBUILD_MODNAME);
+ state->dual_mode = 0;
+ return -ENODEV;
+ }
+ } else {
+ return -ENODEV;
+ }
+ }
+
+ /* attach demodulator */
+ adap->fe[0] = dvb_attach(af9013_attach,
+ &state->af9013_config[adap->id], &adap_to_d(adap)->i2c_adap);
+
+ /*
+ * AF9015 firmware does not like if it gets interrupted by I2C adapter
+ * request on some critical phases. During normal operation I2C adapter
+ * is used only 2nd demodulator and tuner on dual tuner devices.
+ * Override demodulator callbacks and use mutex for limit access to
+ * those "critical" paths to keep AF9015 happy.
+ */
+ if (adap->fe[0]) {
+ state->set_frontend[adap->id] =
+ adap->fe[0]->ops.set_frontend;
+ adap->fe[0]->ops.set_frontend =
+ af9015_af9013_set_frontend;
+
+ state->read_status[adap->id] =
+ adap->fe[0]->ops.read_status;
+ adap->fe[0]->ops.read_status =
+ af9015_af9013_read_status;
+
+ state->init[adap->id] = adap->fe[0]->ops.init;
+ adap->fe[0]->ops.init = af9015_af9013_init;
+
+ state->sleep[adap->id] = adap->fe[0]->ops.sleep;
+ adap->fe[0]->ops.sleep = af9015_af9013_sleep;
+ }
+
+ return adap->fe[0] == NULL ? -ENODEV : 0;
+}
+
+static struct mt2060_config af9015_mt2060_config = {
+ .i2c_address = 0xc0,
+ .clock_out = 0,
+};
+
+static struct qt1010_config af9015_qt1010_config = {
+ .i2c_address = 0xc4,
+};
+
+static struct tda18271_config af9015_tda18271_config = {
+ .gate = TDA18271_GATE_DIGITAL,
+ .small_i2c = TDA18271_16_BYTE_CHUNK_INIT,
+};
+
+static struct mxl5005s_config af9015_mxl5003_config = {
+ .i2c_address = 0xc6,
+ .if_freq = IF_FREQ_4570000HZ,
+ .xtal_freq = CRYSTAL_FREQ_16000000HZ,
+ .agc_mode = MXL_SINGLE_AGC,
+ .tracking_filter = MXL_TF_DEFAULT,
+ .rssi_enable = MXL_RSSI_ENABLE,
+ .cap_select = MXL_CAP_SEL_ENABLE,
+ .div_out = MXL_DIV_OUT_4,
+ .clock_out = MXL_CLOCK_OUT_DISABLE,
+ .output_load = MXL5005S_IF_OUTPUT_LOAD_200_OHM,
+ .top = MXL5005S_TOP_25P2,
+ .mod_mode = MXL_DIGITAL_MODE,
+ .if_mode = MXL_ZERO_IF,
+ .AgcMasterByte = 0x00,
+};
+
+static struct mxl5005s_config af9015_mxl5005_config = {
+ .i2c_address = 0xc6,
+ .if_freq = IF_FREQ_4570000HZ,
+ .xtal_freq = CRYSTAL_FREQ_16000000HZ,
+ .agc_mode = MXL_SINGLE_AGC,
+ .tracking_filter = MXL_TF_OFF,
+ .rssi_enable = MXL_RSSI_ENABLE,
+ .cap_select = MXL_CAP_SEL_ENABLE,
+ .div_out = MXL_DIV_OUT_4,
+ .clock_out = MXL_CLOCK_OUT_DISABLE,
+ .output_load = MXL5005S_IF_OUTPUT_LOAD_200_OHM,
+ .top = MXL5005S_TOP_25P2,
+ .mod_mode = MXL_DIGITAL_MODE,
+ .if_mode = MXL_ZERO_IF,
+ .AgcMasterByte = 0x00,
+};
+
+static struct mc44s803_config af9015_mc44s803_config = {
+ .i2c_address = 0xc0,
+ .dig_out = 1,
+};
+
+static struct tda18218_config af9015_tda18218_config = {
+ .i2c_address = 0xc0,
+ .i2c_wr_max = 21, /* max wr bytes AF9015 I2C adap can handle at once */
+};
+
+static struct mxl5007t_config af9015_mxl5007t_config = {
+ .xtal_freq_hz = MxL_XTAL_24_MHZ,
+ .if_freq_hz = MxL_IF_4_57_MHZ,
+};
+
+static int af9015_tuner_attach(struct dvb_usb_adapter *adap)
+{
+ struct dvb_usb_device *d = adap_to_d(adap);
+ struct af9015_state *state = d_to_priv(d);
+ int ret;
+ dev_dbg(&d->udev->dev, "%s:\n", __func__);
+
+ switch (state->af9013_config[adap->id].tuner) {
+ case AF9013_TUNER_MT2060:
+ case AF9013_TUNER_MT2060_2:
+ ret = dvb_attach(mt2060_attach, adap->fe[0],
+ &adap_to_d(adap)->i2c_adap, &af9015_mt2060_config,
+ state->mt2060_if1[adap->id])
+ == NULL ? -ENODEV : 0;
+ break;
+ case AF9013_TUNER_QT1010:
+ case AF9013_TUNER_QT1010A:
+ ret = dvb_attach(qt1010_attach, adap->fe[0],
+ &adap_to_d(adap)->i2c_adap,
+ &af9015_qt1010_config) == NULL ? -ENODEV : 0;
+ break;
+ case AF9013_TUNER_TDA18271:
+ ret = dvb_attach(tda18271_attach, adap->fe[0], 0xc0,
+ &adap_to_d(adap)->i2c_adap,
+ &af9015_tda18271_config) == NULL ? -ENODEV : 0;
+ break;
+ case AF9013_TUNER_TDA18218:
+ ret = dvb_attach(tda18218_attach, adap->fe[0],
+ &adap_to_d(adap)->i2c_adap,
+ &af9015_tda18218_config) == NULL ? -ENODEV : 0;
+ break;
+ case AF9013_TUNER_MXL5003D:
+ ret = dvb_attach(mxl5005s_attach, adap->fe[0],
+ &adap_to_d(adap)->i2c_adap,
+ &af9015_mxl5003_config) == NULL ? -ENODEV : 0;
+ break;
+ case AF9013_TUNER_MXL5005D:
+ case AF9013_TUNER_MXL5005R:
+ ret = dvb_attach(mxl5005s_attach, adap->fe[0],
+ &adap_to_d(adap)->i2c_adap,
+ &af9015_mxl5005_config) == NULL ? -ENODEV : 0;
+ break;
+ case AF9013_TUNER_ENV77H11D5:
+ ret = dvb_attach(dvb_pll_attach, adap->fe[0], 0xc0,
+ &adap_to_d(adap)->i2c_adap,
+ DVB_PLL_TDA665X) == NULL ? -ENODEV : 0;
+ break;
+ case AF9013_TUNER_MC44S803:
+ ret = dvb_attach(mc44s803_attach, adap->fe[0],
+ &adap_to_d(adap)->i2c_adap,
+ &af9015_mc44s803_config) == NULL ? -ENODEV : 0;
+ break;
+ case AF9013_TUNER_MXL5007T:
+ ret = dvb_attach(mxl5007t_attach, adap->fe[0],
+ &adap_to_d(adap)->i2c_adap,
+ 0xc0, &af9015_mxl5007t_config) == NULL ? -ENODEV : 0;
+ break;
+ case AF9013_TUNER_UNKNOWN:
+ default:
+ dev_err(&d->udev->dev, "%s: unknown tuner id=%d\n",
+ KBUILD_MODNAME,
+ state->af9013_config[adap->id].tuner);
+ ret = -ENODEV;
+ }
+
+ if (adap->fe[0]->ops.tuner_ops.init) {
+ state->tuner_init[adap->id] =
+ adap->fe[0]->ops.tuner_ops.init;
+ adap->fe[0]->ops.tuner_ops.init = af9015_tuner_init;
+ }
+
+ if (adap->fe[0]->ops.tuner_ops.sleep) {
+ state->tuner_sleep[adap->id] =
+ adap->fe[0]->ops.tuner_ops.sleep;
+ adap->fe[0]->ops.tuner_ops.sleep = af9015_tuner_sleep;
+ }
+
+ return ret;
+}
+
+static int af9015_pid_filter_ctrl(struct dvb_usb_adapter *adap, int onoff)
+{
+ struct dvb_usb_device *d = adap_to_d(adap);
+ int ret;
+ dev_dbg(&d->udev->dev, "%s: onoff=%d\n", __func__, onoff);
+
+ if (onoff)
+ ret = af9015_set_reg_bit(d, 0xd503, 0);
+ else
+ ret = af9015_clear_reg_bit(d, 0xd503, 0);
+
+ return ret;
+}
+
+static int af9015_pid_filter(struct dvb_usb_adapter *adap, int index, u16 pid,
+ int onoff)
+{
+ struct dvb_usb_device *d = adap_to_d(adap);
+ int ret;
+ u8 idx;
+ dev_dbg(&d->udev->dev, "%s: index=%d pid=%04x onoff=%d\n",
+ __func__, index, pid, onoff);
+
+ ret = af9015_write_reg(d, 0xd505, (pid & 0xff));
+ if (ret)
+ goto error;
+
+ ret = af9015_write_reg(d, 0xd506, (pid >> 8));
+ if (ret)
+ goto error;
+
+ idx = ((index & 0x1f) | (1 << 5));
+ ret = af9015_write_reg(d, 0xd504, idx);
+
+error:
+ return ret;
+}
+
+static int af9015_init_endpoint(struct dvb_usb_device *d)
+{
+ struct af9015_state *state = d_to_priv(d);
+ int ret;
+ u16 frame_size;
+ u8 packet_size;
+ dev_dbg(&d->udev->dev, "%s: USB speed=%d\n", __func__, d->udev->speed);
+
+ if (d->udev->speed == USB_SPEED_FULL) {
+ frame_size = TS_USB11_FRAME_SIZE/4;
+ packet_size = TS_USB11_MAX_PACKET_SIZE/4;
+ } else {
+ frame_size = TS_USB20_FRAME_SIZE/4;
+ packet_size = TS_USB20_MAX_PACKET_SIZE/4;
+ }
+
+ ret = af9015_set_reg_bit(d, 0xd507, 2); /* assert EP4 reset */
+ if (ret)
+ goto error;
+ ret = af9015_set_reg_bit(d, 0xd50b, 1); /* assert EP5 reset */
+ if (ret)
+ goto error;
+ ret = af9015_clear_reg_bit(d, 0xdd11, 5); /* disable EP4 */
+ if (ret)
+ goto error;
+ ret = af9015_clear_reg_bit(d, 0xdd11, 6); /* disable EP5 */
+ if (ret)
+ goto error;
+ ret = af9015_set_reg_bit(d, 0xdd11, 5); /* enable EP4 */
+ if (ret)
+ goto error;
+ if (state->dual_mode) {
+ ret = af9015_set_reg_bit(d, 0xdd11, 6); /* enable EP5 */
+ if (ret)
+ goto error;
+ }
+ ret = af9015_clear_reg_bit(d, 0xdd13, 5); /* disable EP4 NAK */
+ if (ret)
+ goto error;
+ if (state->dual_mode) {
+ ret = af9015_clear_reg_bit(d, 0xdd13, 6); /* disable EP5 NAK */
+ if (ret)
+ goto error;
+ }
+ /* EP4 xfer length */
+ ret = af9015_write_reg(d, 0xdd88, frame_size & 0xff);
+ if (ret)
+ goto error;
+ ret = af9015_write_reg(d, 0xdd89, frame_size >> 8);
+ if (ret)
+ goto error;
+ /* EP5 xfer length */
+ ret = af9015_write_reg(d, 0xdd8a, frame_size & 0xff);
+ if (ret)
+ goto error;
+ ret = af9015_write_reg(d, 0xdd8b, frame_size >> 8);
+ if (ret)
+ goto error;
+ ret = af9015_write_reg(d, 0xdd0c, packet_size); /* EP4 packet size */
+ if (ret)
+ goto error;
+ ret = af9015_write_reg(d, 0xdd0d, packet_size); /* EP5 packet size */
+ if (ret)
+ goto error;
+ ret = af9015_clear_reg_bit(d, 0xd507, 2); /* negate EP4 reset */
+ if (ret)
+ goto error;
+ if (state->dual_mode) {
+ ret = af9015_clear_reg_bit(d, 0xd50b, 1); /* negate EP5 reset */
+ if (ret)
+ goto error;
+ }
+
+ /* enable / disable mp2if2 */
+ if (state->dual_mode)
+ ret = af9015_set_reg_bit(d, 0xd50b, 0);
+ else
+ ret = af9015_clear_reg_bit(d, 0xd50b, 0);
+
+error:
+ if (ret)
+ dev_err(&d->udev->dev, "%s: endpoint init failed=%d\n",
+ KBUILD_MODNAME, ret);
+
+ return ret;
+}
+
+static int af9015_init(struct dvb_usb_device *d)
+{
+ struct af9015_state *state = d_to_priv(d);
+ int ret;
+ dev_dbg(&d->udev->dev, "%s:\n", __func__);
+
+ mutex_init(&state->fe_mutex);
+
+ /* init RC canary */
+ ret = af9015_write_reg(d, 0x98e9, 0xff);
+ if (ret)
+ goto error;
+
+ ret = af9015_init_endpoint(d);
+ if (ret)
+ goto error;
+
+error:
+ return ret;
+}
+
+#if IS_ENABLED(CONFIG_RC_CORE)
+struct af9015_rc_setup {
+ unsigned int id;
+ char *rc_codes;
+};
+
+static char *af9015_rc_setup_match(unsigned int id,
+ const struct af9015_rc_setup *table)
+{
+ for (; table->rc_codes; table++)
+ if (table->id == id)
+ return table->rc_codes;
+ return NULL;
+}
+
+static const struct af9015_rc_setup af9015_rc_setup_modparam[] = {
+ { AF9015_REMOTE_A_LINK_DTU_M, RC_MAP_ALINK_DTU_M },
+ { AF9015_REMOTE_MSI_DIGIVOX_MINI_II_V3, RC_MAP_MSI_DIGIVOX_II },
+ { AF9015_REMOTE_MYGICTV_U718, RC_MAP_TOTAL_MEDIA_IN_HAND },
+ { AF9015_REMOTE_DIGITTRADE_DVB_T, RC_MAP_DIGITTRADE },
+ { AF9015_REMOTE_AVERMEDIA_KS, RC_MAP_AVERMEDIA_RM_KS },
+ { }
+};
+
+static const struct af9015_rc_setup af9015_rc_setup_hashes[] = {
+ { 0xb8feb708, RC_MAP_MSI_DIGIVOX_II },
+ { 0xa3703d00, RC_MAP_ALINK_DTU_M },
+ { 0x9b7dc64e, RC_MAP_TOTAL_MEDIA_IN_HAND }, /* MYGICTV U718 */
+ { 0x5d49e3db, RC_MAP_DIGITTRADE }, /* LC-Power LC-USB-DVBT */
+ { }
+};
+
+static int af9015_rc_query(struct dvb_usb_device *d)
+{
+ struct af9015_state *state = d_to_priv(d);
+ int ret;
+ u8 buf[17];
+
+ /* read registers needed to detect remote controller code */
+ ret = af9015_read_regs(d, 0x98d9, buf, sizeof(buf));
+ if (ret)
+ goto error;
+
+ /* If any of these are non-zero, assume invalid data */
+ if (buf[1] || buf[2] || buf[3]) {
+ dev_dbg(&d->udev->dev, "%s: invalid data\n", __func__);
+ return ret;
+ }
+
+ /* Check for repeat of previous code */
+ if ((state->rc_repeat != buf[6] || buf[0]) &&
+ !memcmp(&buf[12], state->rc_last, 4)) {
+ dev_dbg(&d->udev->dev, "%s: key repeated\n", __func__);
+ rc_repeat(d->rc_dev);
+ state->rc_repeat = buf[6];
+ return ret;
+ }
+
+ /* Only process key if canary killed */
+ if (buf[16] != 0xff && buf[0] != 0x01) {
+ dev_dbg(&d->udev->dev, "%s: key pressed %*ph\n",
+ __func__, 4, buf + 12);
+
+ /* Reset the canary */
+ ret = af9015_write_reg(d, 0x98e9, 0xff);
+ if (ret)
+ goto error;
+
+ /* Remember this key */
+ memcpy(state->rc_last, &buf[12], 4);
+ if (buf[14] == (u8) ~buf[15]) {
+ if (buf[12] == (u8) ~buf[13]) {
+ /* NEC */
+ state->rc_keycode = RC_SCANCODE_NEC(buf[12],
+ buf[14]);
+ } else {
+ /* NEC extended*/
+ state->rc_keycode = RC_SCANCODE_NECX(buf[12] << 8 |
+ buf[13],
+ buf[14]);
+ }
+ } else {
+ /* 32 bit NEC */
+ state->rc_keycode = RC_SCANCODE_NEC32(buf[12] << 24 |
+ buf[13] << 16 |
+ buf[14] << 8 |
+ buf[15]);
+ }
+ rc_keydown(d->rc_dev, RC_TYPE_NEC, state->rc_keycode, 0);
+ } else {
+ dev_dbg(&d->udev->dev, "%s: no key press\n", __func__);
+ /* Invalidate last keypress */
+ /* Not really needed, but helps with debug */
+ state->rc_last[2] = state->rc_last[3];
+ }
+
+ state->rc_repeat = buf[6];
+ state->rc_failed = false;
+
+error:
+ if (ret) {
+ dev_warn(&d->udev->dev, "%s: rc query failed=%d\n",
+ KBUILD_MODNAME, ret);
+
+ /* allow random errors as dvb-usb will stop polling on error */
+ if (!state->rc_failed)
+ ret = 0;
+
+ state->rc_failed = true;
+ }
+
+ return ret;
+}
+
+static int af9015_get_rc_config(struct dvb_usb_device *d, struct dvb_usb_rc *rc)
+{
+ struct af9015_state *state = d_to_priv(d);
+ u16 vid = le16_to_cpu(d->udev->descriptor.idVendor);
+
+ if (state->ir_mode == AF9015_IR_MODE_DISABLED)
+ return 0;
+
+ /* try to load remote based module param */
+ if (!rc->map_name)
+ rc->map_name = af9015_rc_setup_match(dvb_usb_af9015_remote,
+ af9015_rc_setup_modparam);
+
+ /* try to load remote based eeprom hash */
+ if (!rc->map_name)
+ rc->map_name = af9015_rc_setup_match(state->eeprom_sum,
+ af9015_rc_setup_hashes);
+
+ /* try to load remote based USB iManufacturer string */
+ if (!rc->map_name && vid == USB_VID_AFATECH) {
+ /* Check USB manufacturer and product strings and try
+ to determine correct remote in case of chip vendor
+ reference IDs are used.
+ DO NOT ADD ANYTHING NEW HERE. Use hashes instead. */
+ char manufacturer[10];
+ memset(manufacturer, 0, sizeof(manufacturer));
+ usb_string(d->udev, d->udev->descriptor.iManufacturer,
+ manufacturer, sizeof(manufacturer));
+ if (!strcmp("MSI", manufacturer)) {
+ /* iManufacturer 1 MSI
+ iProduct 2 MSI K-VOX */
+ rc->map_name = af9015_rc_setup_match(
+ AF9015_REMOTE_MSI_DIGIVOX_MINI_II_V3,
+ af9015_rc_setup_modparam);
+ }
+ }
+
+ /* load empty to enable rc */
+ if (!rc->map_name)
+ rc->map_name = RC_MAP_EMPTY;
+
+ rc->allowed_protos = RC_BIT_NEC;
+ rc->query = af9015_rc_query;
+ rc->interval = 500;
+
+ return 0;
+}
+#else
+ #define af9015_get_rc_config NULL
+#endif
+
+static int af9015_probe(struct usb_interface *intf,
+ const struct usb_device_id *id)
+{
+ struct usb_device *udev = interface_to_usbdev(intf);
+ char manufacturer[sizeof("ITE Technologies, Inc.")];
+
+ memset(manufacturer, 0, sizeof(manufacturer));
+ usb_string(udev, udev->descriptor.iManufacturer,
+ manufacturer, sizeof(manufacturer));
+ /*
+ * There is two devices having same ID but different chipset. One uses
+ * AF9015 and the other IT9135 chipset. Only difference seen on lsusb
+ * is iManufacturer string.
+ *
+ * idVendor 0x0ccd TerraTec Electronic GmbH
+ * idProduct 0x0099
+ * bcdDevice 2.00
+ * iManufacturer 1 Afatech
+ * iProduct 2 DVB-T 2
+ *
+ * idVendor 0x0ccd TerraTec Electronic GmbH
+ * idProduct 0x0099
+ * bcdDevice 2.00
+ * iManufacturer 1 ITE Technologies, Inc.
+ * iProduct 2 DVB-T TV Stick
+ */
+ if ((le16_to_cpu(udev->descriptor.idVendor) == USB_VID_TERRATEC) &&
+ (le16_to_cpu(udev->descriptor.idProduct) == 0x0099)) {
+ if (!strcmp("ITE Technologies, Inc.", manufacturer)) {
+ dev_dbg(&udev->dev, "%s: rejecting device\n", __func__);
+ return -ENODEV;
+ }
+ }
+
+ return dvb_usbv2_probe(intf, id);
+}
+
+/* interface 0 is used by DVB-T receiver and
+ interface 1 is for remote controller (HID) */
+static struct dvb_usb_device_properties af9015_props = {
+ .driver_name = KBUILD_MODNAME,
+ .owner = THIS_MODULE,
+ .adapter_nr = adapter_nr,
+ .size_of_priv = sizeof(struct af9015_state),
+
+ .generic_bulk_ctrl_endpoint = 0x02,
+ .generic_bulk_ctrl_endpoint_response = 0x81,
+
+ .identify_state = af9015_identify_state,
+ .firmware = AF9015_FIRMWARE,
+ .download_firmware = af9015_download_firmware,
+
+ .i2c_algo = &af9015_i2c_algo,
+ .read_config = af9015_read_config,
+ .frontend_attach = af9015_af9013_frontend_attach,
+ .tuner_attach = af9015_tuner_attach,
+ .init = af9015_init,
+ .get_rc_config = af9015_get_rc_config,
+ .get_stream_config = af9015_get_stream_config,
+
+ .get_adapter_count = af9015_get_adapter_count,
+ .adapter = {
+ {
+ .caps = DVB_USB_ADAP_HAS_PID_FILTER |
+ DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
+ .pid_filter_count = 32,
+ .pid_filter = af9015_pid_filter,
+ .pid_filter_ctrl = af9015_pid_filter_ctrl,
+
+ .stream = DVB_USB_STREAM_BULK(0x84, 8, TS_USB20_FRAME_SIZE),
+ }, {
+ .stream = DVB_USB_STREAM_BULK(0x85, 8, TS_USB20_FRAME_SIZE),
+ },
+ },
+};
+
+static const struct usb_device_id af9015_id_table[] = {
+ { DVB_USB_DEVICE(USB_VID_AFATECH, USB_PID_AFATECH_AF9015_9015,
+ &af9015_props, "Afatech AF9015 reference design", NULL) },
+ { DVB_USB_DEVICE(USB_VID_AFATECH, USB_PID_AFATECH_AF9015_9016,
+ &af9015_props, "Afatech AF9015 reference design", NULL) },
+ { DVB_USB_DEVICE(USB_VID_LEADTEK, USB_PID_WINFAST_DTV_DONGLE_GOLD,
+ &af9015_props, "Leadtek WinFast DTV Dongle Gold", RC_MAP_LEADTEK_Y04G0051) },
+ { DVB_USB_DEVICE(USB_VID_PINNACLE, USB_PID_PINNACLE_PCTV71E,
+ &af9015_props, "Pinnacle PCTV 71e", NULL) },
+ { DVB_USB_DEVICE(USB_VID_KWORLD_2, USB_PID_KWORLD_399U,
+ &af9015_props, "KWorld PlusTV Dual DVB-T Stick (DVB-T 399U)", NULL) },
+ { DVB_USB_DEVICE(USB_VID_VISIONPLUS, USB_PID_TINYTWIN,
+ &af9015_props, "DigitalNow TinyTwin", RC_MAP_AZUREWAVE_AD_TU700) },
+ { DVB_USB_DEVICE(USB_VID_VISIONPLUS, USB_PID_AZUREWAVE_AD_TU700,
+ &af9015_props, "TwinHan AzureWave AD-TU700(704J)", RC_MAP_AZUREWAVE_AD_TU700) },
+ { DVB_USB_DEVICE(USB_VID_TERRATEC, USB_PID_TERRATEC_CINERGY_T_USB_XE_REV2,
+ &af9015_props, "TerraTec Cinergy T USB XE", NULL) },
+ { DVB_USB_DEVICE(USB_VID_KWORLD_2, USB_PID_KWORLD_PC160_2T,
+ &af9015_props, "KWorld PlusTV Dual DVB-T PCI (DVB-T PC160-2T)", NULL) },
+ { DVB_USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_VOLAR_X,
+ &af9015_props, "AVerMedia AVerTV DVB-T Volar X", RC_MAP_AVERMEDIA_M135A) },
+ { DVB_USB_DEVICE(USB_VID_XTENSIONS, USB_PID_XTENSIONS_XD_380,
+ &af9015_props, "Xtensions XD-380", NULL) },
+ { DVB_USB_DEVICE(USB_VID_MSI_2, USB_PID_MSI_DIGIVOX_DUO,
+ &af9015_props, "MSI DIGIVOX Duo", RC_MAP_MSI_DIGIVOX_III) },
+ { DVB_USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_VOLAR_X_2,
+ &af9015_props, "Fujitsu-Siemens Slim Mobile USB DVB-T", NULL) },
+ { DVB_USB_DEVICE(USB_VID_TELESTAR, USB_PID_TELESTAR_STARSTICK_2,
+ &af9015_props, "Telestar Starstick 2", NULL) },
+ { DVB_USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_A309,
+ &af9015_props, "AVerMedia A309", NULL) },
+ { DVB_USB_DEVICE(USB_VID_MSI_2, USB_PID_MSI_DIGI_VOX_MINI_III,
+ &af9015_props, "MSI Digi VOX mini III", RC_MAP_MSI_DIGIVOX_III) },
+ { DVB_USB_DEVICE(USB_VID_KWORLD_2, USB_PID_KWORLD_395U,
+ &af9015_props, "KWorld USB DVB-T TV Stick II (VS-DVB-T 395U)", NULL) },
+ { DVB_USB_DEVICE(USB_VID_KWORLD_2, USB_PID_KWORLD_395U_2,
+ &af9015_props, "KWorld USB DVB-T TV Stick II (VS-DVB-T 395U)", NULL) },
+ { DVB_USB_DEVICE(USB_VID_KWORLD_2, USB_PID_KWORLD_395U_3,
+ &af9015_props, "KWorld USB DVB-T TV Stick II (VS-DVB-T 395U)", NULL) },
+ { DVB_USB_DEVICE(USB_VID_AFATECH, USB_PID_TREKSTOR_DVBT,
+ &af9015_props, "TrekStor DVB-T USB Stick", RC_MAP_TREKSTOR) },
+ { DVB_USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_A850,
+ &af9015_props, "AverMedia AVerTV Volar Black HD (A850)", NULL) },
+ { DVB_USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_A805,
+ &af9015_props, "AverMedia AVerTV Volar GPS 805 (A805)", NULL) },
+ { DVB_USB_DEVICE(USB_VID_KWORLD_2, USB_PID_CONCEPTRONIC_CTVDIGRCU,
+ &af9015_props, "Conceptronic USB2.0 DVB-T CTVDIGRCU V3.0", NULL) },
+ { DVB_USB_DEVICE(USB_VID_KWORLD_2, USB_PID_KWORLD_MC810,
+ &af9015_props, "KWorld Digial MC-810", NULL) },
+ { DVB_USB_DEVICE(USB_VID_KYE, USB_PID_GENIUS_TVGO_DVB_T03,
+ &af9015_props, "Genius TVGo DVB-T03", NULL) },
+ { DVB_USB_DEVICE(USB_VID_KWORLD_2, USB_PID_KWORLD_399U_2,
+ &af9015_props, "KWorld PlusTV Dual DVB-T Stick (DVB-T 399U)", NULL) },
+ { DVB_USB_DEVICE(USB_VID_KWORLD_2, USB_PID_KWORLD_PC160_T,
+ &af9015_props, "KWorld PlusTV DVB-T PCI Pro Card (DVB-T PC160-T)", NULL) },
+ { DVB_USB_DEVICE(USB_VID_KWORLD_2, USB_PID_SVEON_STV20,
+ &af9015_props, "Sveon STV20 Tuner USB DVB-T HDTV", NULL) },
+ { DVB_USB_DEVICE(USB_VID_KWORLD_2, USB_PID_TINYTWIN_2,
+ &af9015_props, "DigitalNow TinyTwin v2", RC_MAP_DIGITALNOW_TINYTWIN) },
+ { DVB_USB_DEVICE(USB_VID_LEADTEK, USB_PID_WINFAST_DTV2000DS,
+ &af9015_props, "Leadtek WinFast DTV2000DS", RC_MAP_LEADTEK_Y04G0051) },
+ { DVB_USB_DEVICE(USB_VID_KWORLD_2, USB_PID_KWORLD_UB383_T,
+ &af9015_props, "KWorld USB DVB-T Stick Mobile (UB383-T)", NULL) },
+ { DVB_USB_DEVICE(USB_VID_KWORLD_2, USB_PID_KWORLD_395U_4,
+ &af9015_props, "KWorld USB DVB-T TV Stick II (VS-DVB-T 395U)", NULL) },
+ { DVB_USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_A815M,
+ &af9015_props, "AverMedia AVerTV Volar M (A815Mac)", NULL) },
+ { DVB_USB_DEVICE(USB_VID_TERRATEC, USB_PID_TERRATEC_CINERGY_T_STICK_RC,
+ &af9015_props, "TerraTec Cinergy T Stick RC", RC_MAP_TERRATEC_SLIM_2) },
+ /* XXX: that same ID [0ccd:0099] is used by af9035 driver too */
+ { DVB_USB_DEVICE(USB_VID_TERRATEC, USB_PID_TERRATEC_CINERGY_T_STICK_DUAL_RC,
+ &af9015_props, "TerraTec Cinergy T Stick Dual RC", RC_MAP_TERRATEC_SLIM) },
+ { DVB_USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_A850T,
+ &af9015_props, "AverMedia AVerTV Red HD+ (A850T)", NULL) },
+ { DVB_USB_DEVICE(USB_VID_GTEK, USB_PID_TINYTWIN_3,
+ &af9015_props, "DigitalNow TinyTwin v3", RC_MAP_DIGITALNOW_TINYTWIN) },
+ { DVB_USB_DEVICE(USB_VID_KWORLD_2, USB_PID_SVEON_STV22,
+ &af9015_props, "Sveon STV22 Dual USB DVB-T Tuner HDTV", RC_MAP_MSI_DIGIVOX_III) },
+ { }
+};
+MODULE_DEVICE_TABLE(usb, af9015_id_table);
+
+/* usb specific object needed to register this driver with the usb subsystem */
+static struct usb_driver af9015_usb_driver = {
+ .name = KBUILD_MODNAME,
+ .id_table = af9015_id_table,
+ .probe = af9015_probe,
+ .disconnect = dvb_usbv2_disconnect,
+ .suspend = dvb_usbv2_suspend,
+ .resume = dvb_usbv2_resume,
+ .reset_resume = dvb_usbv2_reset_resume,
+ .no_dynamic_id = 1,
+ .soft_unbind = 1,
+};
+
+module_usb_driver(af9015_usb_driver);
+
+MODULE_AUTHOR("Antti Palosaari <crope@iki.fi>");
+MODULE_DESCRIPTION("Afatech AF9015 driver");
+MODULE_LICENSE("GPL");
+MODULE_FIRMWARE(AF9015_FIRMWARE);
diff --git a/kernel/drivers/media/usb/dvb-usb-v2/af9015.h b/kernel/drivers/media/usb/dvb-usb-v2/af9015.h
new file mode 100644
index 000000000..3a6f3ad1e
--- /dev/null
+++ b/kernel/drivers/media/usb/dvb-usb-v2/af9015.h
@@ -0,0 +1,153 @@
+/*
+ * DVB USB Linux driver for Afatech AF9015 DVB-T USB2.0 receiver
+ *
+ * Copyright (C) 2007 Antti Palosaari <crope@iki.fi>
+ *
+ * Thanks to Afatech who kindly provided information.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+
+#ifndef AF9015_H
+#define AF9015_H
+
+#include <linux/hash.h>
+#include "dvb_usb.h"
+#include "af9013.h"
+#include "dvb-pll.h"
+#include "mt2060.h"
+#include "qt1010.h"
+#include "tda18271.h"
+#include "mxl5005s.h"
+#include "mc44s803.h"
+#include "tda18218.h"
+#include "mxl5007t.h"
+
+#define AF9015_FIRMWARE "dvb-usb-af9015.fw"
+
+/* Windows driver uses packet count 21 for USB1.1 and 348 for USB2.0.
+ We use smaller - about 1/4 from the original, 5 and 87. */
+#define TS_PACKET_SIZE 188
+
+#define TS_USB20_PACKET_COUNT 87
+#define TS_USB20_FRAME_SIZE (TS_PACKET_SIZE*TS_USB20_PACKET_COUNT)
+
+#define TS_USB11_PACKET_COUNT 5
+#define TS_USB11_FRAME_SIZE (TS_PACKET_SIZE*TS_USB11_PACKET_COUNT)
+
+#define TS_USB20_MAX_PACKET_SIZE 512
+#define TS_USB11_MAX_PACKET_SIZE 64
+
+#define AF9015_I2C_EEPROM 0xa0
+#define AF9015_I2C_DEMOD 0x38
+#define AF9015_USB_TIMEOUT 2000
+
+/* EEPROM locations */
+#define AF9015_EEPROM_IR_MODE 0x18
+#define AF9015_EEPROM_IR_REMOTE_TYPE 0x34
+#define AF9015_EEPROM_TS_MODE 0x31
+#define AF9015_EEPROM_DEMOD2_I2C 0x32
+
+#define AF9015_EEPROM_SAW_BW1 0x35
+#define AF9015_EEPROM_XTAL_TYPE1 0x36
+#define AF9015_EEPROM_SPEC_INV1 0x37
+#define AF9015_EEPROM_IF1L 0x38
+#define AF9015_EEPROM_IF1H 0x39
+#define AF9015_EEPROM_MT2060_IF1L 0x3a
+#define AF9015_EEPROM_MT2060_IF1H 0x3b
+#define AF9015_EEPROM_TUNER_ID1 0x3c
+
+#define AF9015_EEPROM_SAW_BW2 0x45
+#define AF9015_EEPROM_XTAL_TYPE2 0x46
+#define AF9015_EEPROM_SPEC_INV2 0x47
+#define AF9015_EEPROM_IF2L 0x48
+#define AF9015_EEPROM_IF2H 0x49
+#define AF9015_EEPROM_MT2060_IF2L 0x4a
+#define AF9015_EEPROM_MT2060_IF2H 0x4b
+#define AF9015_EEPROM_TUNER_ID2 0x4c
+
+#define AF9015_EEPROM_OFFSET (AF9015_EEPROM_SAW_BW2 - AF9015_EEPROM_SAW_BW1)
+
+struct req_t {
+ u8 cmd; /* [0] */
+ /* seq */ /* [1] */
+ u8 i2c_addr; /* [2] */
+ u16 addr; /* [3|4] */
+ u8 mbox; /* [5] */
+ u8 addr_len; /* [6] */
+ u8 data_len; /* [7] */
+ u8 *data;
+};
+
+enum af9015_cmd {
+ GET_CONFIG = 0x10,
+ DOWNLOAD_FIRMWARE = 0x11,
+ BOOT = 0x13,
+ READ_MEMORY = 0x20,
+ WRITE_MEMORY = 0x21,
+ READ_WRITE_I2C = 0x22,
+ COPY_FIRMWARE = 0x23,
+ RECONNECT_USB = 0x5a,
+ WRITE_VIRTUAL_MEMORY = 0x26,
+ GET_IR_CODE = 0x27,
+ READ_I2C,
+ WRITE_I2C,
+};
+
+enum af9015_ir_mode {
+ AF9015_IR_MODE_DISABLED = 0,
+ AF9015_IR_MODE_HID,
+ AF9015_IR_MODE_RLC,
+ AF9015_IR_MODE_RC6,
+ AF9015_IR_MODE_POLLING, /* just guess */
+};
+
+#define BUF_LEN 63
+struct af9015_state {
+ u8 buf[BUF_LEN]; /* bulk USB control message */
+ u8 ir_mode;
+ u8 rc_repeat;
+ u32 rc_keycode;
+ u8 rc_last[4];
+ bool rc_failed;
+ u8 dual_mode;
+ u8 seq; /* packet sequence number */
+ u16 mt2060_if1[2];
+ u16 firmware_size;
+ u16 firmware_checksum;
+ u32 eeprom_sum;
+ struct af9013_config af9013_config[2];
+
+ /* for demod callback override */
+ int (*set_frontend[2]) (struct dvb_frontend *fe);
+ int (*read_status[2]) (struct dvb_frontend *fe, fe_status_t *status);
+ int (*init[2]) (struct dvb_frontend *fe);
+ int (*sleep[2]) (struct dvb_frontend *fe);
+ int (*tuner_init[2]) (struct dvb_frontend *fe);
+ int (*tuner_sleep[2]) (struct dvb_frontend *fe);
+ struct mutex fe_mutex;
+};
+
+enum af9015_remote {
+ AF9015_REMOTE_NONE = 0,
+/* 1 */ AF9015_REMOTE_A_LINK_DTU_M,
+ AF9015_REMOTE_MSI_DIGIVOX_MINI_II_V3,
+ AF9015_REMOTE_MYGICTV_U718,
+ AF9015_REMOTE_DIGITTRADE_DVB_T,
+/* 5 */ AF9015_REMOTE_AVERMEDIA_KS,
+};
+
+#endif
diff --git a/kernel/drivers/media/usb/dvb-usb-v2/af9035.c b/kernel/drivers/media/usb/dvb-usb-v2/af9035.c
new file mode 100644
index 000000000..80a29f537
--- /dev/null
+++ b/kernel/drivers/media/usb/dvb-usb-v2/af9035.c
@@ -0,0 +1,2088 @@
+/*
+ * Afatech AF9035 DVB USB driver
+ *
+ * Copyright (C) 2009 Antti Palosaari <crope@iki.fi>
+ * Copyright (C) 2012 Antti Palosaari <crope@iki.fi>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+
+#include "af9035.h"
+
+/* Max transfer size done by I2C transfer functions */
+#define MAX_XFER_SIZE 64
+
+DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
+
+static u16 af9035_checksum(const u8 *buf, size_t len)
+{
+ size_t i;
+ u16 checksum = 0;
+
+ for (i = 1; i < len; i++) {
+ if (i % 2)
+ checksum += buf[i] << 8;
+ else
+ checksum += buf[i];
+ }
+ checksum = ~checksum;
+
+ return checksum;
+}
+
+static int af9035_ctrl_msg(struct dvb_usb_device *d, struct usb_req *req)
+{
+#define REQ_HDR_LEN 4 /* send header size */
+#define ACK_HDR_LEN 3 /* rece header size */
+#define CHECKSUM_LEN 2
+#define USB_TIMEOUT 2000
+ struct state *state = d_to_priv(d);
+ int ret, wlen, rlen;
+ u16 checksum, tmp_checksum;
+
+ mutex_lock(&d->usb_mutex);
+
+ /* buffer overflow check */
+ if (req->wlen > (BUF_LEN - REQ_HDR_LEN - CHECKSUM_LEN) ||
+ req->rlen > (BUF_LEN - ACK_HDR_LEN - CHECKSUM_LEN)) {
+ dev_err(&d->udev->dev, "%s: too much data wlen=%d rlen=%d\n",
+ KBUILD_MODNAME, req->wlen, req->rlen);
+ ret = -EINVAL;
+ goto exit;
+ }
+
+ state->buf[0] = REQ_HDR_LEN + req->wlen + CHECKSUM_LEN - 1;
+ state->buf[1] = req->mbox;
+ state->buf[2] = req->cmd;
+ state->buf[3] = state->seq++;
+ memcpy(&state->buf[REQ_HDR_LEN], req->wbuf, req->wlen);
+
+ wlen = REQ_HDR_LEN + req->wlen + CHECKSUM_LEN;
+ rlen = ACK_HDR_LEN + req->rlen + CHECKSUM_LEN;
+
+ /* calc and add checksum */
+ checksum = af9035_checksum(state->buf, state->buf[0] - 1);
+ state->buf[state->buf[0] - 1] = (checksum >> 8);
+ state->buf[state->buf[0] - 0] = (checksum & 0xff);
+
+ /* no ack for these packets */
+ if (req->cmd == CMD_FW_DL)
+ rlen = 0;
+
+ ret = dvb_usbv2_generic_rw_locked(d,
+ state->buf, wlen, state->buf, rlen);
+ if (ret)
+ goto exit;
+
+ /* no ack for those packets */
+ if (req->cmd == CMD_FW_DL)
+ goto exit;
+
+ /* verify checksum */
+ checksum = af9035_checksum(state->buf, rlen - 2);
+ tmp_checksum = (state->buf[rlen - 2] << 8) | state->buf[rlen - 1];
+ if (tmp_checksum != checksum) {
+ dev_err(&d->udev->dev,
+ "%s: command=%02x checksum mismatch (%04x != %04x)\n",
+ KBUILD_MODNAME, req->cmd, tmp_checksum,
+ checksum);
+ ret = -EIO;
+ goto exit;
+ }
+
+ /* check status */
+ if (state->buf[2]) {
+ /* fw returns status 1 when IR code was not received */
+ if (req->cmd == CMD_IR_GET || state->buf[2] == 1) {
+ ret = 1;
+ goto exit;
+ }
+
+ dev_dbg(&d->udev->dev, "%s: command=%02x failed fw error=%d\n",
+ __func__, req->cmd, state->buf[2]);
+ ret = -EIO;
+ goto exit;
+ }
+
+ /* read request, copy returned data to return buf */
+ if (req->rlen)
+ memcpy(req->rbuf, &state->buf[ACK_HDR_LEN], req->rlen);
+exit:
+ mutex_unlock(&d->usb_mutex);
+ if (ret < 0)
+ dev_dbg(&d->udev->dev, "%s: failed=%d\n", __func__, ret);
+ return ret;
+}
+
+/* write multiple registers */
+static int af9035_wr_regs(struct dvb_usb_device *d, u32 reg, u8 *val, int len)
+{
+ u8 wbuf[MAX_XFER_SIZE];
+ u8 mbox = (reg >> 16) & 0xff;
+ struct usb_req req = { CMD_MEM_WR, mbox, 6 + len, wbuf, 0, NULL };
+
+ if (6 + len > sizeof(wbuf)) {
+ dev_warn(&d->udev->dev, "%s: i2c wr: len=%d is too big!\n",
+ KBUILD_MODNAME, len);
+ return -EOPNOTSUPP;
+ }
+
+ wbuf[0] = len;
+ wbuf[1] = 2;
+ wbuf[2] = 0;
+ wbuf[3] = 0;
+ wbuf[4] = (reg >> 8) & 0xff;
+ wbuf[5] = (reg >> 0) & 0xff;
+ memcpy(&wbuf[6], val, len);
+
+ return af9035_ctrl_msg(d, &req);
+}
+
+/* read multiple registers */
+static int af9035_rd_regs(struct dvb_usb_device *d, u32 reg, u8 *val, int len)
+{
+ u8 wbuf[] = { len, 2, 0, 0, (reg >> 8) & 0xff, reg & 0xff };
+ u8 mbox = (reg >> 16) & 0xff;
+ struct usb_req req = { CMD_MEM_RD, mbox, sizeof(wbuf), wbuf, len, val };
+
+ return af9035_ctrl_msg(d, &req);
+}
+
+/* write single register */
+static int af9035_wr_reg(struct dvb_usb_device *d, u32 reg, u8 val)
+{
+ return af9035_wr_regs(d, reg, &val, 1);
+}
+
+/* read single register */
+static int af9035_rd_reg(struct dvb_usb_device *d, u32 reg, u8 *val)
+{
+ return af9035_rd_regs(d, reg, val, 1);
+}
+
+/* write single register with mask */
+static int af9035_wr_reg_mask(struct dvb_usb_device *d, u32 reg, u8 val,
+ u8 mask)
+{
+ int ret;
+ u8 tmp;
+
+ /* no need for read if whole reg is written */
+ if (mask != 0xff) {
+ ret = af9035_rd_regs(d, reg, &tmp, 1);
+ if (ret)
+ return ret;
+
+ val &= mask;
+ tmp &= ~mask;
+ val |= tmp;
+ }
+
+ return af9035_wr_regs(d, reg, &val, 1);
+}
+
+static int af9035_add_i2c_dev(struct dvb_usb_device *d, const char *type,
+ u8 addr, void *platform_data, struct i2c_adapter *adapter)
+{
+ int ret, num;
+ struct state *state = d_to_priv(d);
+ struct i2c_client *client;
+ struct i2c_board_info board_info = {
+ .addr = addr,
+ .platform_data = platform_data,
+ };
+
+ strlcpy(board_info.type, type, I2C_NAME_SIZE);
+
+ /* find first free client */
+ for (num = 0; num < AF9035_I2C_CLIENT_MAX; num++) {
+ if (state->i2c_client[num] == NULL)
+ break;
+ }
+
+ dev_dbg(&d->udev->dev, "%s: num=%d\n", __func__, num);
+
+ if (num == AF9035_I2C_CLIENT_MAX) {
+ dev_err(&d->udev->dev, "%s: I2C client out of index\n",
+ KBUILD_MODNAME);
+ ret = -ENODEV;
+ goto err;
+ }
+
+ request_module("%s", board_info.type);
+
+ /* register I2C device */
+ client = i2c_new_device(adapter, &board_info);
+ if (client == NULL || client->dev.driver == NULL) {
+ ret = -ENODEV;
+ goto err;
+ }
+
+ /* increase I2C driver usage count */
+ if (!try_module_get(client->dev.driver->owner)) {
+ i2c_unregister_device(client);
+ ret = -ENODEV;
+ goto err;
+ }
+
+ state->i2c_client[num] = client;
+ return 0;
+err:
+ dev_dbg(&d->udev->dev, "%s: failed=%d\n", __func__, ret);
+ return ret;
+}
+
+static void af9035_del_i2c_dev(struct dvb_usb_device *d)
+{
+ int num;
+ struct state *state = d_to_priv(d);
+ struct i2c_client *client;
+
+ /* find last used client */
+ num = AF9035_I2C_CLIENT_MAX;
+ while (num--) {
+ if (state->i2c_client[num] != NULL)
+ break;
+ }
+
+ dev_dbg(&d->udev->dev, "%s: num=%d\n", __func__, num);
+
+ if (num == -1) {
+ dev_err(&d->udev->dev, "%s: I2C client out of index\n",
+ KBUILD_MODNAME);
+ goto err;
+ }
+
+ client = state->i2c_client[num];
+
+ /* decrease I2C driver usage count */
+ module_put(client->dev.driver->owner);
+
+ /* unregister I2C device */
+ i2c_unregister_device(client);
+
+ state->i2c_client[num] = NULL;
+ return;
+err:
+ dev_dbg(&d->udev->dev, "%s: failed\n", __func__);
+}
+
+static int af9035_i2c_master_xfer(struct i2c_adapter *adap,
+ struct i2c_msg msg[], int num)
+{
+ struct dvb_usb_device *d = i2c_get_adapdata(adap);
+ struct state *state = d_to_priv(d);
+ int ret;
+
+ if (mutex_lock_interruptible(&d->i2c_mutex) < 0)
+ return -EAGAIN;
+
+ /*
+ * AF9035 I2C sub header is 5 bytes long. Meaning of those bytes are:
+ * 0: data len
+ * 1: I2C addr << 1
+ * 2: reg addr len
+ * byte 3 and 4 can be used as reg addr
+ * 3: reg addr MSB
+ * used when reg addr len is set to 2
+ * 4: reg addr LSB
+ * used when reg addr len is set to 1 or 2
+ *
+ * For the simplify we do not use register addr at all.
+ * NOTE: As a firmware knows tuner type there is very small possibility
+ * there could be some tuner I2C hacks done by firmware and this may
+ * lead problems if firmware expects those bytes are used.
+ *
+ * TODO: Here is few hacks. AF9035 chip integrates AF9033 demodulator.
+ * IT9135 chip integrates AF9033 demodulator and RF tuner. For dual
+ * tuner devices, there is also external AF9033 demodulator connected
+ * via external I2C bus. All AF9033 demod I2C traffic, both single and
+ * dual tuner configuration, is covered by firmware - actual USB IO
+ * looks just like a memory access.
+ * In case of IT913x chip, there is own tuner driver. It is implemented
+ * currently as a I2C driver, even tuner IP block is likely build
+ * directly into the demodulator memory space and there is no own I2C
+ * bus. I2C subsystem does not allow register multiple devices to same
+ * bus, having same slave address. Due to that we reuse demod address,
+ * shifted by one bit, on that case.
+ *
+ * For IT930x we use a different command and the sub header is
+ * different as well:
+ * 0: data len
+ * 1: I2C bus (0x03 seems to be only value used)
+ * 2: I2C addr << 1
+ */
+#define AF9035_IS_I2C_XFER_WRITE_READ(_msg, _num) \
+ (_num == 2 && !(_msg[0].flags & I2C_M_RD) && (_msg[1].flags & I2C_M_RD))
+#define AF9035_IS_I2C_XFER_WRITE(_msg, _num) \
+ (_num == 1 && !(_msg[0].flags & I2C_M_RD))
+#define AF9035_IS_I2C_XFER_READ(_msg, _num) \
+ (_num == 1 && (_msg[0].flags & I2C_M_RD))
+
+ if (AF9035_IS_I2C_XFER_WRITE_READ(msg, num)) {
+ if (msg[0].len > 40 || msg[1].len > 40) {
+ /* TODO: correct limits > 40 */
+ ret = -EOPNOTSUPP;
+ } else if ((msg[0].addr == state->af9033_i2c_addr[0]) ||
+ (msg[0].addr == state->af9033_i2c_addr[1]) ||
+ (state->chip_type == 0x9135)) {
+ /* demod access via firmware interface */
+ u32 reg = msg[0].buf[0] << 16 | msg[0].buf[1] << 8 |
+ msg[0].buf[2];
+
+ if (msg[0].addr == state->af9033_i2c_addr[1] ||
+ msg[0].addr == (state->af9033_i2c_addr[1] >> 1))
+ reg |= 0x100000;
+
+ ret = af9035_rd_regs(d, reg, &msg[1].buf[0],
+ msg[1].len);
+ } else {
+ /* I2C write + read */
+ u8 buf[MAX_XFER_SIZE];
+ struct usb_req req = { CMD_I2C_RD, 0, 5 + msg[0].len,
+ buf, msg[1].len, msg[1].buf };
+
+ if (state->chip_type == 0x9306) {
+ req.cmd = CMD_GENERIC_I2C_RD;
+ req.wlen = 3 + msg[0].len;
+ }
+ req.mbox |= ((msg[0].addr & 0x80) >> 3);
+
+ buf[0] = msg[1].len;
+ if (state->chip_type == 0x9306) {
+ buf[1] = 0x03; /* I2C bus */
+ buf[2] = msg[0].addr << 1;
+ memcpy(&buf[3], msg[0].buf, msg[0].len);
+ } else {
+ buf[1] = msg[0].addr << 1;
+ buf[2] = 0x00; /* reg addr len */
+ buf[3] = 0x00; /* reg addr MSB */
+ buf[4] = 0x00; /* reg addr LSB */
+ memcpy(&buf[5], msg[0].buf, msg[0].len);
+ }
+ ret = af9035_ctrl_msg(d, &req);
+ }
+ } else if (AF9035_IS_I2C_XFER_WRITE(msg, num)) {
+ if (msg[0].len > 40) {
+ /* TODO: correct limits > 40 */
+ ret = -EOPNOTSUPP;
+ } else if ((msg[0].addr == state->af9033_i2c_addr[0]) ||
+ (msg[0].addr == state->af9033_i2c_addr[1]) ||
+ (state->chip_type == 0x9135)) {
+ /* demod access via firmware interface */
+ u32 reg = msg[0].buf[0] << 16 | msg[0].buf[1] << 8 |
+ msg[0].buf[2];
+
+ if (msg[0].addr == state->af9033_i2c_addr[1] ||
+ msg[0].addr == (state->af9033_i2c_addr[1] >> 1))
+ reg |= 0x100000;
+
+ ret = af9035_wr_regs(d, reg, &msg[0].buf[3],
+ msg[0].len - 3);
+ } else {
+ /* I2C write */
+ u8 buf[MAX_XFER_SIZE];
+ struct usb_req req = { CMD_I2C_WR, 0, 5 + msg[0].len,
+ buf, 0, NULL };
+
+ if (state->chip_type == 0x9306) {
+ req.cmd = CMD_GENERIC_I2C_WR;
+ req.wlen = 3 + msg[0].len;
+ }
+
+ req.mbox |= ((msg[0].addr & 0x80) >> 3);
+ buf[0] = msg[0].len;
+ if (state->chip_type == 0x9306) {
+ buf[1] = 0x03; /* I2C bus */
+ buf[2] = msg[0].addr << 1;
+ memcpy(&buf[3], msg[0].buf, msg[0].len);
+ } else {
+ buf[1] = msg[0].addr << 1;
+ buf[2] = 0x00; /* reg addr len */
+ buf[3] = 0x00; /* reg addr MSB */
+ buf[4] = 0x00; /* reg addr LSB */
+ memcpy(&buf[5], msg[0].buf, msg[0].len);
+ }
+ ret = af9035_ctrl_msg(d, &req);
+ }
+ } else if (AF9035_IS_I2C_XFER_READ(msg, num)) {
+ if (msg[0].len > 40) {
+ /* TODO: correct limits > 40 */
+ ret = -EOPNOTSUPP;
+ } else {
+ /* I2C read */
+ u8 buf[5];
+ struct usb_req req = { CMD_I2C_RD, 0, sizeof(buf),
+ buf, msg[0].len, msg[0].buf };
+
+ if (state->chip_type == 0x9306) {
+ req.cmd = CMD_GENERIC_I2C_RD;
+ req.wlen = 3;
+ }
+ req.mbox |= ((msg[0].addr & 0x80) >> 3);
+ buf[0] = msg[0].len;
+ if (state->chip_type == 0x9306) {
+ buf[1] = 0x03; /* I2C bus */
+ buf[2] = msg[0].addr << 1;
+ } else {
+ buf[1] = msg[0].addr << 1;
+ buf[2] = 0x00; /* reg addr len */
+ buf[3] = 0x00; /* reg addr MSB */
+ buf[4] = 0x00; /* reg addr LSB */
+ }
+ ret = af9035_ctrl_msg(d, &req);
+ }
+ } else {
+ /*
+ * We support only three kind of I2C transactions:
+ * 1) 1 x write + 1 x read (repeated start)
+ * 2) 1 x write
+ * 3) 1 x read
+ */
+ ret = -EOPNOTSUPP;
+ }
+
+ mutex_unlock(&d->i2c_mutex);
+
+ if (ret < 0)
+ return ret;
+ else
+ return num;
+}
+
+static u32 af9035_i2c_functionality(struct i2c_adapter *adapter)
+{
+ return I2C_FUNC_I2C;
+}
+
+static struct i2c_algorithm af9035_i2c_algo = {
+ .master_xfer = af9035_i2c_master_xfer,
+ .functionality = af9035_i2c_functionality,
+};
+
+static int af9035_identify_state(struct dvb_usb_device *d, const char **name)
+{
+ struct state *state = d_to_priv(d);
+ int ret;
+ u8 wbuf[1] = { 1 };
+ u8 rbuf[4];
+ struct usb_req req = { CMD_FW_QUERYINFO, 0, sizeof(wbuf), wbuf,
+ sizeof(rbuf), rbuf };
+
+ ret = af9035_rd_regs(d, 0x1222, rbuf, 3);
+ if (ret < 0)
+ goto err;
+
+ state->chip_version = rbuf[0];
+ state->chip_type = rbuf[2] << 8 | rbuf[1] << 0;
+
+ ret = af9035_rd_reg(d, 0x384f, &state->prechip_version);
+ if (ret < 0)
+ goto err;
+
+ dev_info(&d->udev->dev,
+ "%s: prechip_version=%02x chip_version=%02x chip_type=%04x\n",
+ KBUILD_MODNAME, state->prechip_version,
+ state->chip_version, state->chip_type);
+
+ if (state->chip_type == 0x9135) {
+ if (state->chip_version == 0x02)
+ *name = AF9035_FIRMWARE_IT9135_V2;
+ else
+ *name = AF9035_FIRMWARE_IT9135_V1;
+ state->eeprom_addr = EEPROM_BASE_IT9135;
+ } else if (state->chip_type == 0x9306) {
+ *name = AF9035_FIRMWARE_IT9303;
+ state->eeprom_addr = EEPROM_BASE_IT9135;
+ } else {
+ *name = AF9035_FIRMWARE_AF9035;
+ state->eeprom_addr = EEPROM_BASE_AF9035;
+ }
+
+ ret = af9035_ctrl_msg(d, &req);
+ if (ret < 0)
+ goto err;
+
+ dev_dbg(&d->udev->dev, "%s: reply=%*ph\n", __func__, 4, rbuf);
+ if (rbuf[0] || rbuf[1] || rbuf[2] || rbuf[3])
+ ret = WARM;
+ else
+ ret = COLD;
+
+ return ret;
+
+err:
+ dev_dbg(&d->udev->dev, "%s: failed=%d\n", __func__, ret);
+
+ return ret;
+}
+
+static int af9035_download_firmware_old(struct dvb_usb_device *d,
+ const struct firmware *fw)
+{
+ int ret, i, j, len;
+ u8 wbuf[1];
+ struct usb_req req = { 0, 0, 0, NULL, 0, NULL };
+ struct usb_req req_fw_dl = { CMD_FW_DL, 0, 0, wbuf, 0, NULL };
+ u8 hdr_core;
+ u16 hdr_addr, hdr_data_len, hdr_checksum;
+ #define MAX_DATA 58
+ #define HDR_SIZE 7
+
+ /*
+ * Thanks to Daniel Glöckner <daniel-gl@gmx.net> about that info!
+ *
+ * byte 0: MCS 51 core
+ * There are two inside the AF9035 (1=Link and 2=OFDM) with separate
+ * address spaces
+ * byte 1-2: Big endian destination address
+ * byte 3-4: Big endian number of data bytes following the header
+ * byte 5-6: Big endian header checksum, apparently ignored by the chip
+ * Calculated as ~(h[0]*256+h[1]+h[2]*256+h[3]+h[4]*256)
+ */
+
+ for (i = fw->size; i > HDR_SIZE;) {
+ hdr_core = fw->data[fw->size - i + 0];
+ hdr_addr = fw->data[fw->size - i + 1] << 8;
+ hdr_addr |= fw->data[fw->size - i + 2] << 0;
+ hdr_data_len = fw->data[fw->size - i + 3] << 8;
+ hdr_data_len |= fw->data[fw->size - i + 4] << 0;
+ hdr_checksum = fw->data[fw->size - i + 5] << 8;
+ hdr_checksum |= fw->data[fw->size - i + 6] << 0;
+
+ dev_dbg(&d->udev->dev,
+ "%s: core=%d addr=%04x data_len=%d checksum=%04x\n",
+ __func__, hdr_core, hdr_addr, hdr_data_len,
+ hdr_checksum);
+
+ if (((hdr_core != 1) && (hdr_core != 2)) ||
+ (hdr_data_len > i)) {
+ dev_dbg(&d->udev->dev, "%s: bad firmware\n", __func__);
+ break;
+ }
+
+ /* download begin packet */
+ req.cmd = CMD_FW_DL_BEGIN;
+ ret = af9035_ctrl_msg(d, &req);
+ if (ret < 0)
+ goto err;
+
+ /* download firmware packet(s) */
+ for (j = HDR_SIZE + hdr_data_len; j > 0; j -= MAX_DATA) {
+ len = j;
+ if (len > MAX_DATA)
+ len = MAX_DATA;
+ req_fw_dl.wlen = len;
+ req_fw_dl.wbuf = (u8 *) &fw->data[fw->size - i +
+ HDR_SIZE + hdr_data_len - j];
+ ret = af9035_ctrl_msg(d, &req_fw_dl);
+ if (ret < 0)
+ goto err;
+ }
+
+ /* download end packet */
+ req.cmd = CMD_FW_DL_END;
+ ret = af9035_ctrl_msg(d, &req);
+ if (ret < 0)
+ goto err;
+
+ i -= hdr_data_len + HDR_SIZE;
+
+ dev_dbg(&d->udev->dev, "%s: data uploaded=%zu\n",
+ __func__, fw->size - i);
+ }
+
+ /* print warn if firmware is bad, continue and see what happens */
+ if (i)
+ dev_warn(&d->udev->dev, "%s: bad firmware\n", KBUILD_MODNAME);
+
+ return 0;
+
+err:
+ dev_dbg(&d->udev->dev, "%s: failed=%d\n", __func__, ret);
+
+ return ret;
+}
+
+static int af9035_download_firmware_new(struct dvb_usb_device *d,
+ const struct firmware *fw)
+{
+ int ret, i, i_prev;
+ struct usb_req req_fw_dl = { CMD_FW_SCATTER_WR, 0, 0, NULL, 0, NULL };
+ #define HDR_SIZE 7
+
+ /*
+ * There seems to be following firmware header. Meaning of bytes 0-3
+ * is unknown.
+ *
+ * 0: 3
+ * 1: 0, 1
+ * 2: 0
+ * 3: 1, 2, 3
+ * 4: addr MSB
+ * 5: addr LSB
+ * 6: count of data bytes ?
+ */
+ for (i = HDR_SIZE, i_prev = 0; i <= fw->size; i++) {
+ if (i == fw->size ||
+ (fw->data[i + 0] == 0x03 &&
+ (fw->data[i + 1] == 0x00 ||
+ fw->data[i + 1] == 0x01) &&
+ fw->data[i + 2] == 0x00)) {
+ req_fw_dl.wlen = i - i_prev;
+ req_fw_dl.wbuf = (u8 *) &fw->data[i_prev];
+ i_prev = i;
+ ret = af9035_ctrl_msg(d, &req_fw_dl);
+ if (ret < 0)
+ goto err;
+
+ dev_dbg(&d->udev->dev, "%s: data uploaded=%d\n",
+ __func__, i);
+ }
+ }
+
+ return 0;
+
+err:
+ dev_dbg(&d->udev->dev, "%s: failed=%d\n", __func__, ret);
+
+ return ret;
+}
+
+static int af9035_download_firmware(struct dvb_usb_device *d,
+ const struct firmware *fw)
+{
+ struct state *state = d_to_priv(d);
+ int ret;
+ u8 wbuf[1];
+ u8 rbuf[4];
+ u8 tmp;
+ struct usb_req req = { 0, 0, 0, NULL, 0, NULL };
+ struct usb_req req_fw_ver = { CMD_FW_QUERYINFO, 0, 1, wbuf, 4, rbuf };
+
+ dev_dbg(&d->udev->dev, "%s:\n", __func__);
+
+ /*
+ * In case of dual tuner configuration we need to do some extra
+ * initialization in order to download firmware to slave demod too,
+ * which is done by master demod.
+ * Master feeds also clock and controls power via GPIO.
+ */
+ ret = af9035_rd_reg(d, state->eeprom_addr + EEPROM_TS_MODE, &tmp);
+ if (ret < 0)
+ goto err;
+
+ if (tmp == 1 || tmp == 3) {
+ /* configure gpioh1, reset & power slave demod */
+ ret = af9035_wr_reg_mask(d, 0x00d8b0, 0x01, 0x01);
+ if (ret < 0)
+ goto err;
+
+ ret = af9035_wr_reg_mask(d, 0x00d8b1, 0x01, 0x01);
+ if (ret < 0)
+ goto err;
+
+ ret = af9035_wr_reg_mask(d, 0x00d8af, 0x00, 0x01);
+ if (ret < 0)
+ goto err;
+
+ usleep_range(10000, 50000);
+
+ ret = af9035_wr_reg_mask(d, 0x00d8af, 0x01, 0x01);
+ if (ret < 0)
+ goto err;
+
+ /* tell the slave I2C address */
+ ret = af9035_rd_reg(d,
+ state->eeprom_addr + EEPROM_2ND_DEMOD_ADDR,
+ &tmp);
+ if (ret < 0)
+ goto err;
+
+ /* use default I2C address if eeprom has no address set */
+ if (!tmp)
+ tmp = 0x3a;
+
+ if ((state->chip_type == 0x9135) ||
+ (state->chip_type == 0x9306)) {
+ ret = af9035_wr_reg(d, 0x004bfb, tmp);
+ if (ret < 0)
+ goto err;
+ } else {
+ ret = af9035_wr_reg(d, 0x00417f, tmp);
+ if (ret < 0)
+ goto err;
+
+ /* enable clock out */
+ ret = af9035_wr_reg_mask(d, 0x00d81a, 0x01, 0x01);
+ if (ret < 0)
+ goto err;
+ }
+ }
+
+ if (fw->data[0] == 0x01)
+ ret = af9035_download_firmware_old(d, fw);
+ else
+ ret = af9035_download_firmware_new(d, fw);
+ if (ret < 0)
+ goto err;
+
+ /* firmware loaded, request boot */
+ req.cmd = CMD_FW_BOOT;
+ ret = af9035_ctrl_msg(d, &req);
+ if (ret < 0)
+ goto err;
+
+ /* ensure firmware starts */
+ wbuf[0] = 1;
+ ret = af9035_ctrl_msg(d, &req_fw_ver);
+ if (ret < 0)
+ goto err;
+
+ if (!(rbuf[0] || rbuf[1] || rbuf[2] || rbuf[3])) {
+ dev_err(&d->udev->dev, "%s: firmware did not run\n",
+ KBUILD_MODNAME);
+ ret = -ENODEV;
+ goto err;
+ }
+
+ dev_info(&d->udev->dev, "%s: firmware version=%d.%d.%d.%d",
+ KBUILD_MODNAME, rbuf[0], rbuf[1], rbuf[2], rbuf[3]);
+
+ return 0;
+
+err:
+ dev_dbg(&d->udev->dev, "%s: failed=%d\n", __func__, ret);
+
+ return ret;
+}
+
+static int af9035_read_config(struct dvb_usb_device *d)
+{
+ struct state *state = d_to_priv(d);
+ int ret, i;
+ u8 tmp;
+ u16 tmp16, addr;
+
+ /* demod I2C "address" */
+ state->af9033_i2c_addr[0] = 0x38;
+ state->af9033_i2c_addr[1] = 0x3a;
+ state->af9033_config[0].adc_multiplier = AF9033_ADC_MULTIPLIER_2X;
+ state->af9033_config[1].adc_multiplier = AF9033_ADC_MULTIPLIER_2X;
+ state->af9033_config[0].ts_mode = AF9033_TS_MODE_USB;
+ state->af9033_config[1].ts_mode = AF9033_TS_MODE_SERIAL;
+
+ if (state->chip_type == 0x9135) {
+ /* feed clock for integrated RF tuner */
+ state->af9033_config[0].dyn0_clk = true;
+ state->af9033_config[1].dyn0_clk = true;
+
+ if (state->chip_version == 0x02) {
+ state->af9033_config[0].tuner = AF9033_TUNER_IT9135_60;
+ state->af9033_config[1].tuner = AF9033_TUNER_IT9135_60;
+ tmp16 = 0x00461d; /* eeprom memory mapped location */
+ } else {
+ state->af9033_config[0].tuner = AF9033_TUNER_IT9135_38;
+ state->af9033_config[1].tuner = AF9033_TUNER_IT9135_38;
+ tmp16 = 0x00461b; /* eeprom memory mapped location */
+ }
+
+ /* check if eeprom exists */
+ ret = af9035_rd_reg(d, tmp16, &tmp);
+ if (ret < 0)
+ goto err;
+
+ if (tmp == 0x00) {
+ dev_dbg(&d->udev->dev, "%s: no eeprom\n", __func__);
+ goto skip_eeprom;
+ }
+ } else if (state->chip_type == 0x9306) {
+ /*
+ * IT930x is an USB bridge, only single demod-single tuner
+ * configurations seen so far.
+ */
+ return 0;
+ }
+
+
+
+ /* check if there is dual tuners */
+ ret = af9035_rd_reg(d, state->eeprom_addr + EEPROM_TS_MODE, &tmp);
+ if (ret < 0)
+ goto err;
+
+ if (tmp == 1 || tmp == 3)
+ state->dual_mode = true;
+
+ dev_dbg(&d->udev->dev, "%s: ts mode=%d dual mode=%d\n", __func__,
+ tmp, state->dual_mode);
+
+ if (state->dual_mode) {
+ /* read 2nd demodulator I2C address */
+ ret = af9035_rd_reg(d,
+ state->eeprom_addr + EEPROM_2ND_DEMOD_ADDR,
+ &tmp);
+ if (ret < 0)
+ goto err;
+
+ if (tmp)
+ state->af9033_i2c_addr[1] = tmp;
+
+ dev_dbg(&d->udev->dev, "%s: 2nd demod I2C addr=%02x\n",
+ __func__, tmp);
+ }
+
+ addr = state->eeprom_addr;
+
+ for (i = 0; i < state->dual_mode + 1; i++) {
+ /* tuner */
+ ret = af9035_rd_reg(d, addr + EEPROM_1_TUNER_ID, &tmp);
+ if (ret < 0)
+ goto err;
+
+ dev_dbg(&d->udev->dev, "%s: [%d]tuner=%02x\n",
+ __func__, i, tmp);
+
+ /* tuner sanity check */
+ if (state->chip_type == 0x9135) {
+ if (state->chip_version == 0x02) {
+ /* IT9135 BX (v2) */
+ switch (tmp) {
+ case AF9033_TUNER_IT9135_60:
+ case AF9033_TUNER_IT9135_61:
+ case AF9033_TUNER_IT9135_62:
+ state->af9033_config[i].tuner = tmp;
+ break;
+ }
+ } else {
+ /* IT9135 AX (v1) */
+ switch (tmp) {
+ case AF9033_TUNER_IT9135_38:
+ case AF9033_TUNER_IT9135_51:
+ case AF9033_TUNER_IT9135_52:
+ state->af9033_config[i].tuner = tmp;
+ break;
+ }
+ }
+ } else {
+ /* AF9035 */
+ state->af9033_config[i].tuner = tmp;
+ }
+
+ if (state->af9033_config[i].tuner != tmp) {
+ dev_info(&d->udev->dev,
+ "%s: [%d] overriding tuner from %02x to %02x\n",
+ KBUILD_MODNAME, i, tmp,
+ state->af9033_config[i].tuner);
+ }
+
+ switch (state->af9033_config[i].tuner) {
+ case AF9033_TUNER_TUA9001:
+ case AF9033_TUNER_FC0011:
+ case AF9033_TUNER_MXL5007T:
+ case AF9033_TUNER_TDA18218:
+ case AF9033_TUNER_FC2580:
+ case AF9033_TUNER_FC0012:
+ state->af9033_config[i].spec_inv = 1;
+ break;
+ case AF9033_TUNER_IT9135_38:
+ case AF9033_TUNER_IT9135_51:
+ case AF9033_TUNER_IT9135_52:
+ case AF9033_TUNER_IT9135_60:
+ case AF9033_TUNER_IT9135_61:
+ case AF9033_TUNER_IT9135_62:
+ break;
+ default:
+ dev_warn(&d->udev->dev,
+ "%s: tuner id=%02x not supported, please report!",
+ KBUILD_MODNAME, tmp);
+ }
+
+ /* disable dual mode if driver does not support it */
+ if (i == 1)
+ switch (state->af9033_config[i].tuner) {
+ case AF9033_TUNER_FC0012:
+ case AF9033_TUNER_IT9135_38:
+ case AF9033_TUNER_IT9135_51:
+ case AF9033_TUNER_IT9135_52:
+ case AF9033_TUNER_IT9135_60:
+ case AF9033_TUNER_IT9135_61:
+ case AF9033_TUNER_IT9135_62:
+ case AF9033_TUNER_MXL5007T:
+ break;
+ default:
+ state->dual_mode = false;
+ dev_info(&d->udev->dev,
+ "%s: driver does not support 2nd tuner and will disable it",
+ KBUILD_MODNAME);
+ }
+
+ /* tuner IF frequency */
+ ret = af9035_rd_reg(d, addr + EEPROM_1_IF_L, &tmp);
+ if (ret < 0)
+ goto err;
+
+ tmp16 = tmp;
+
+ ret = af9035_rd_reg(d, addr + EEPROM_1_IF_H, &tmp);
+ if (ret < 0)
+ goto err;
+
+ tmp16 |= tmp << 8;
+
+ dev_dbg(&d->udev->dev, "%s: [%d]IF=%d\n", __func__, i, tmp16);
+
+ addr += 0x10; /* shift for the 2nd tuner params */
+ }
+
+skip_eeprom:
+ /* get demod clock */
+ ret = af9035_rd_reg(d, 0x00d800, &tmp);
+ if (ret < 0)
+ goto err;
+
+ tmp = (tmp >> 0) & 0x0f;
+
+ for (i = 0; i < ARRAY_SIZE(state->af9033_config); i++) {
+ if (state->chip_type == 0x9135)
+ state->af9033_config[i].clock = clock_lut_it9135[tmp];
+ else
+ state->af9033_config[i].clock = clock_lut_af9035[tmp];
+ }
+
+ return 0;
+
+err:
+ dev_dbg(&d->udev->dev, "%s: failed=%d\n", __func__, ret);
+
+ return ret;
+}
+
+static int af9035_tua9001_tuner_callback(struct dvb_usb_device *d,
+ int cmd, int arg)
+{
+ int ret;
+ u8 val;
+
+ dev_dbg(&d->udev->dev, "%s: cmd=%d arg=%d\n", __func__, cmd, arg);
+
+ /*
+ * CEN always enabled by hardware wiring
+ * RESETN GPIOT3
+ * RXEN GPIOT2
+ */
+
+ switch (cmd) {
+ case TUA9001_CMD_RESETN:
+ if (arg)
+ val = 0x00;
+ else
+ val = 0x01;
+
+ ret = af9035_wr_reg_mask(d, 0x00d8e7, val, 0x01);
+ if (ret < 0)
+ goto err;
+ break;
+ case TUA9001_CMD_RXEN:
+ if (arg)
+ val = 0x01;
+ else
+ val = 0x00;
+
+ ret = af9035_wr_reg_mask(d, 0x00d8eb, val, 0x01);
+ if (ret < 0)
+ goto err;
+ break;
+ }
+
+ return 0;
+
+err:
+ dev_dbg(&d->udev->dev, "%s: failed=%d\n", __func__, ret);
+
+ return ret;
+}
+
+
+static int af9035_fc0011_tuner_callback(struct dvb_usb_device *d,
+ int cmd, int arg)
+{
+ int ret;
+
+ switch (cmd) {
+ case FC0011_FE_CALLBACK_POWER:
+ /* Tuner enable */
+ ret = af9035_wr_reg_mask(d, 0xd8eb, 1, 1);
+ if (ret < 0)
+ goto err;
+
+ ret = af9035_wr_reg_mask(d, 0xd8ec, 1, 1);
+ if (ret < 0)
+ goto err;
+
+ ret = af9035_wr_reg_mask(d, 0xd8ed, 1, 1);
+ if (ret < 0)
+ goto err;
+
+ /* LED */
+ ret = af9035_wr_reg_mask(d, 0xd8d0, 1, 1);
+ if (ret < 0)
+ goto err;
+
+ ret = af9035_wr_reg_mask(d, 0xd8d1, 1, 1);
+ if (ret < 0)
+ goto err;
+
+ usleep_range(10000, 50000);
+ break;
+ case FC0011_FE_CALLBACK_RESET:
+ ret = af9035_wr_reg(d, 0xd8e9, 1);
+ if (ret < 0)
+ goto err;
+
+ ret = af9035_wr_reg(d, 0xd8e8, 1);
+ if (ret < 0)
+ goto err;
+
+ ret = af9035_wr_reg(d, 0xd8e7, 1);
+ if (ret < 0)
+ goto err;
+
+ usleep_range(10000, 20000);
+
+ ret = af9035_wr_reg(d, 0xd8e7, 0);
+ if (ret < 0)
+ goto err;
+
+ usleep_range(10000, 20000);
+ break;
+ default:
+ ret = -EINVAL;
+ goto err;
+ }
+
+ return 0;
+
+err:
+ dev_dbg(&d->udev->dev, "%s: failed=%d\n", __func__, ret);
+
+ return ret;
+}
+
+static int af9035_tuner_callback(struct dvb_usb_device *d, int cmd, int arg)
+{
+ struct state *state = d_to_priv(d);
+
+ switch (state->af9033_config[0].tuner) {
+ case AF9033_TUNER_FC0011:
+ return af9035_fc0011_tuner_callback(d, cmd, arg);
+ case AF9033_TUNER_TUA9001:
+ return af9035_tua9001_tuner_callback(d, cmd, arg);
+ default:
+ break;
+ }
+
+ return 0;
+}
+
+static int af9035_frontend_callback(void *adapter_priv, int component,
+ int cmd, int arg)
+{
+ struct i2c_adapter *adap = adapter_priv;
+ struct dvb_usb_device *d = i2c_get_adapdata(adap);
+
+ dev_dbg(&d->udev->dev, "%s: component=%d cmd=%d arg=%d\n",
+ __func__, component, cmd, arg);
+
+ switch (component) {
+ case DVB_FRONTEND_COMPONENT_TUNER:
+ return af9035_tuner_callback(d, cmd, arg);
+ default:
+ break;
+ }
+
+ return 0;
+}
+
+static int af9035_get_adapter_count(struct dvb_usb_device *d)
+{
+ struct state *state = d_to_priv(d);
+
+ return state->dual_mode + 1;
+}
+
+static int af9035_frontend_attach(struct dvb_usb_adapter *adap)
+{
+ struct state *state = adap_to_priv(adap);
+ struct dvb_usb_device *d = adap_to_d(adap);
+ int ret;
+
+ dev_dbg(&d->udev->dev, "%s: adap->id=%d\n", __func__, adap->id);
+
+ if (!state->af9033_config[adap->id].tuner) {
+ /* unsupported tuner */
+ ret = -ENODEV;
+ goto err;
+ }
+
+ state->af9033_config[adap->id].fe = &adap->fe[0];
+ state->af9033_config[adap->id].ops = &state->ops;
+ ret = af9035_add_i2c_dev(d, "af9033", state->af9033_i2c_addr[adap->id],
+ &state->af9033_config[adap->id], &d->i2c_adap);
+ if (ret)
+ goto err;
+
+ if (adap->fe[0] == NULL) {
+ ret = -ENODEV;
+ goto err;
+ }
+
+ /* disable I2C-gate */
+ adap->fe[0]->ops.i2c_gate_ctrl = NULL;
+ adap->fe[0]->callback = af9035_frontend_callback;
+
+ return 0;
+
+err:
+ dev_dbg(&d->udev->dev, "%s: failed=%d\n", __func__, ret);
+
+ return ret;
+}
+
+static int it930x_frontend_attach(struct dvb_usb_adapter *adap)
+{
+ struct state *state = adap_to_priv(adap);
+ struct dvb_usb_device *d = adap_to_d(adap);
+ int ret;
+ struct si2168_config si2168_config;
+ struct i2c_adapter *adapter;
+
+ dev_dbg(&d->udev->dev, "adap->id=%d\n", adap->id);
+
+ memset(&si2168_config, 0, sizeof(si2168_config));
+ si2168_config.i2c_adapter = &adapter;
+ si2168_config.fe = &adap->fe[0];
+ si2168_config.ts_mode = SI2168_TS_SERIAL;
+
+ state->af9033_config[adap->id].fe = &adap->fe[0];
+ state->af9033_config[adap->id].ops = &state->ops;
+ ret = af9035_add_i2c_dev(d, "si2168", 0x67, &si2168_config,
+ &d->i2c_adap);
+ if (ret)
+ goto err;
+
+ if (adap->fe[0] == NULL) {
+ ret = -ENODEV;
+ goto err;
+ }
+ state->i2c_adapter_demod = adapter;
+
+ return 0;
+
+err:
+ dev_dbg(&d->udev->dev, "%s: failed=%d\n", __func__, ret);
+
+ return ret;
+}
+
+static int af9035_frontend_detach(struct dvb_usb_adapter *adap)
+{
+ struct state *state = adap_to_priv(adap);
+ struct dvb_usb_device *d = adap_to_d(adap);
+ int demod2;
+
+ dev_dbg(&d->udev->dev, "%s: adap->id=%d\n", __func__, adap->id);
+
+ /*
+ * For dual tuner devices we have to resolve 2nd demod client, as there
+ * is two different kind of tuner drivers; one is using I2C binding
+ * and the other is using DVB attach/detach binding.
+ */
+ switch (state->af9033_config[adap->id].tuner) {
+ case AF9033_TUNER_IT9135_38:
+ case AF9033_TUNER_IT9135_51:
+ case AF9033_TUNER_IT9135_52:
+ case AF9033_TUNER_IT9135_60:
+ case AF9033_TUNER_IT9135_61:
+ case AF9033_TUNER_IT9135_62:
+ demod2 = 2;
+ break;
+ default:
+ demod2 = 1;
+ }
+
+ if (adap->id == 1) {
+ if (state->i2c_client[demod2])
+ af9035_del_i2c_dev(d);
+ } else if (adap->id == 0) {
+ if (state->i2c_client[0])
+ af9035_del_i2c_dev(d);
+ }
+
+ return 0;
+}
+
+static struct tua9001_config af9035_tua9001_config = {
+ .i2c_addr = 0x60,
+};
+
+static const struct fc0011_config af9035_fc0011_config = {
+ .i2c_address = 0x60,
+};
+
+static struct mxl5007t_config af9035_mxl5007t_config[] = {
+ {
+ .xtal_freq_hz = MxL_XTAL_24_MHZ,
+ .if_freq_hz = MxL_IF_4_57_MHZ,
+ .invert_if = 0,
+ .loop_thru_enable = 0,
+ .clk_out_enable = 0,
+ .clk_out_amp = MxL_CLKOUT_AMP_0_94V,
+ }, {
+ .xtal_freq_hz = MxL_XTAL_24_MHZ,
+ .if_freq_hz = MxL_IF_4_57_MHZ,
+ .invert_if = 0,
+ .loop_thru_enable = 1,
+ .clk_out_enable = 1,
+ .clk_out_amp = MxL_CLKOUT_AMP_0_94V,
+ }
+};
+
+static struct tda18218_config af9035_tda18218_config = {
+ .i2c_address = 0x60,
+ .i2c_wr_max = 21,
+};
+
+static const struct fc2580_config af9035_fc2580_config = {
+ .i2c_addr = 0x56,
+ .clock = 16384000,
+};
+
+static const struct fc0012_config af9035_fc0012_config[] = {
+ {
+ .i2c_address = 0x63,
+ .xtal_freq = FC_XTAL_36_MHZ,
+ .dual_master = true,
+ .loop_through = true,
+ .clock_out = true,
+ }, {
+ .i2c_address = 0x63 | 0x80, /* I2C bus select hack */
+ .xtal_freq = FC_XTAL_36_MHZ,
+ .dual_master = true,
+ }
+};
+
+static int af9035_tuner_attach(struct dvb_usb_adapter *adap)
+{
+ struct state *state = adap_to_priv(adap);
+ struct dvb_usb_device *d = adap_to_d(adap);
+ int ret;
+ struct dvb_frontend *fe;
+ struct i2c_msg msg[1];
+ u8 tuner_addr;
+
+ dev_dbg(&d->udev->dev, "%s: adap->id=%d\n", __func__, adap->id);
+
+ /*
+ * XXX: Hack used in that function: we abuse unused I2C address bit [7]
+ * to carry info about used I2C bus for dual tuner configuration.
+ */
+
+ switch (state->af9033_config[adap->id].tuner) {
+ case AF9033_TUNER_TUA9001:
+ /* AF9035 gpiot3 = TUA9001 RESETN
+ AF9035 gpiot2 = TUA9001 RXEN */
+
+ /* configure gpiot2 and gpiot2 as output */
+ ret = af9035_wr_reg_mask(d, 0x00d8ec, 0x01, 0x01);
+ if (ret < 0)
+ goto err;
+
+ ret = af9035_wr_reg_mask(d, 0x00d8ed, 0x01, 0x01);
+ if (ret < 0)
+ goto err;
+
+ ret = af9035_wr_reg_mask(d, 0x00d8e8, 0x01, 0x01);
+ if (ret < 0)
+ goto err;
+
+ ret = af9035_wr_reg_mask(d, 0x00d8e9, 0x01, 0x01);
+ if (ret < 0)
+ goto err;
+
+ /* attach tuner */
+ fe = dvb_attach(tua9001_attach, adap->fe[0],
+ &d->i2c_adap, &af9035_tua9001_config);
+ break;
+ case AF9033_TUNER_FC0011:
+ fe = dvb_attach(fc0011_attach, adap->fe[0],
+ &d->i2c_adap, &af9035_fc0011_config);
+ break;
+ case AF9033_TUNER_MXL5007T:
+ if (adap->id == 0) {
+ ret = af9035_wr_reg(d, 0x00d8e0, 1);
+ if (ret < 0)
+ goto err;
+
+ ret = af9035_wr_reg(d, 0x00d8e1, 1);
+ if (ret < 0)
+ goto err;
+
+ ret = af9035_wr_reg(d, 0x00d8df, 0);
+ if (ret < 0)
+ goto err;
+
+ msleep(30);
+
+ ret = af9035_wr_reg(d, 0x00d8df, 1);
+ if (ret < 0)
+ goto err;
+
+ msleep(300);
+
+ ret = af9035_wr_reg(d, 0x00d8c0, 1);
+ if (ret < 0)
+ goto err;
+
+ ret = af9035_wr_reg(d, 0x00d8c1, 1);
+ if (ret < 0)
+ goto err;
+
+ ret = af9035_wr_reg(d, 0x00d8bf, 0);
+ if (ret < 0)
+ goto err;
+
+ ret = af9035_wr_reg(d, 0x00d8b4, 1);
+ if (ret < 0)
+ goto err;
+
+ ret = af9035_wr_reg(d, 0x00d8b5, 1);
+ if (ret < 0)
+ goto err;
+
+ ret = af9035_wr_reg(d, 0x00d8b3, 1);
+ if (ret < 0)
+ goto err;
+
+ tuner_addr = 0x60;
+ } else {
+ tuner_addr = 0x60 | 0x80; /* I2C bus hack */
+ }
+
+ /* attach tuner */
+ fe = dvb_attach(mxl5007t_attach, adap->fe[0], &d->i2c_adap,
+ tuner_addr, &af9035_mxl5007t_config[adap->id]);
+ break;
+ case AF9033_TUNER_TDA18218:
+ /* attach tuner */
+ fe = dvb_attach(tda18218_attach, adap->fe[0],
+ &d->i2c_adap, &af9035_tda18218_config);
+ break;
+ case AF9033_TUNER_FC2580:
+ /* Tuner enable using gpiot2_o, gpiot2_en and gpiot2_on */
+ ret = af9035_wr_reg_mask(d, 0xd8eb, 0x01, 0x01);
+ if (ret < 0)
+ goto err;
+
+ ret = af9035_wr_reg_mask(d, 0xd8ec, 0x01, 0x01);
+ if (ret < 0)
+ goto err;
+
+ ret = af9035_wr_reg_mask(d, 0xd8ed, 0x01, 0x01);
+ if (ret < 0)
+ goto err;
+
+ usleep_range(10000, 50000);
+ /* attach tuner */
+ fe = dvb_attach(fc2580_attach, adap->fe[0],
+ &d->i2c_adap, &af9035_fc2580_config);
+ break;
+ case AF9033_TUNER_FC0012:
+ /*
+ * AF9035 gpiot2 = FC0012 enable
+ * XXX: there seems to be something on gpioh8 too, but on my
+ * my test I didn't find any difference.
+ */
+
+ if (adap->id == 0) {
+ /* configure gpiot2 as output and high */
+ ret = af9035_wr_reg_mask(d, 0xd8eb, 0x01, 0x01);
+ if (ret < 0)
+ goto err;
+
+ ret = af9035_wr_reg_mask(d, 0xd8ec, 0x01, 0x01);
+ if (ret < 0)
+ goto err;
+
+ ret = af9035_wr_reg_mask(d, 0xd8ed, 0x01, 0x01);
+ if (ret < 0)
+ goto err;
+ } else {
+ /*
+ * FIXME: That belongs for the FC0012 driver.
+ * Write 02 to FC0012 master tuner register 0d directly
+ * in order to make slave tuner working.
+ */
+ msg[0].addr = 0x63;
+ msg[0].flags = 0;
+ msg[0].len = 2;
+ msg[0].buf = "\x0d\x02";
+ ret = i2c_transfer(&d->i2c_adap, msg, 1);
+ if (ret < 0)
+ goto err;
+ }
+
+ usleep_range(10000, 50000);
+
+ fe = dvb_attach(fc0012_attach, adap->fe[0], &d->i2c_adap,
+ &af9035_fc0012_config[adap->id]);
+ break;
+ case AF9033_TUNER_IT9135_38:
+ case AF9033_TUNER_IT9135_51:
+ case AF9033_TUNER_IT9135_52:
+ {
+ struct it913x_config it913x_config = {
+ .fe = adap->fe[0],
+ .chip_ver = 1,
+ };
+
+ if (state->dual_mode) {
+ if (adap->id == 0)
+ it913x_config.role = IT913X_ROLE_DUAL_MASTER;
+ else
+ it913x_config.role = IT913X_ROLE_DUAL_SLAVE;
+ }
+
+ ret = af9035_add_i2c_dev(d, "it913x",
+ state->af9033_i2c_addr[adap->id] >> 1,
+ &it913x_config, &d->i2c_adap);
+ if (ret)
+ goto err;
+
+ fe = adap->fe[0];
+ break;
+ }
+ case AF9033_TUNER_IT9135_60:
+ case AF9033_TUNER_IT9135_61:
+ case AF9033_TUNER_IT9135_62:
+ {
+ struct it913x_config it913x_config = {
+ .fe = adap->fe[0],
+ .chip_ver = 2,
+ };
+
+ if (state->dual_mode) {
+ if (adap->id == 0)
+ it913x_config.role = IT913X_ROLE_DUAL_MASTER;
+ else
+ it913x_config.role = IT913X_ROLE_DUAL_SLAVE;
+ }
+
+ ret = af9035_add_i2c_dev(d, "it913x",
+ state->af9033_i2c_addr[adap->id] >> 1,
+ &it913x_config, &d->i2c_adap);
+ if (ret)
+ goto err;
+
+ fe = adap->fe[0];
+ break;
+ }
+ default:
+ fe = NULL;
+ }
+
+ if (fe == NULL) {
+ ret = -ENODEV;
+ goto err;
+ }
+
+ return 0;
+
+err:
+ dev_dbg(&d->udev->dev, "%s: failed=%d\n", __func__, ret);
+
+ return ret;
+}
+
+static int it930x_tuner_attach(struct dvb_usb_adapter *adap)
+{
+ struct state *state = adap_to_priv(adap);
+ struct dvb_usb_device *d = adap_to_d(adap);
+ int ret;
+ struct si2157_config si2157_config;
+
+ dev_dbg(&d->udev->dev, "%s: adap->id=%d\n", __func__, adap->id);
+
+ /* I2C master bus 2 clock speed 300k */
+ ret = af9035_wr_reg(d, 0x00f6a7, 0x07);
+ if (ret < 0)
+ goto err;
+
+ /* I2C master bus 1,3 clock speed 300k */
+ ret = af9035_wr_reg(d, 0x00f103, 0x07);
+ if (ret < 0)
+ goto err;
+
+ /* set gpio11 low */
+ ret = af9035_wr_reg_mask(d, 0xd8d4, 0x01, 0x01);
+ if (ret < 0)
+ goto err;
+
+ ret = af9035_wr_reg_mask(d, 0xd8d5, 0x01, 0x01);
+ if (ret < 0)
+ goto err;
+
+ ret = af9035_wr_reg_mask(d, 0xd8d3, 0x01, 0x01);
+ if (ret < 0)
+ goto err;
+
+ /* Tuner enable using gpiot2_en, gpiot2_on and gpiot2_o (reset) */
+ ret = af9035_wr_reg_mask(d, 0xd8b8, 0x01, 0x01);
+ if (ret < 0)
+ goto err;
+
+ ret = af9035_wr_reg_mask(d, 0xd8b9, 0x01, 0x01);
+ if (ret < 0)
+ goto err;
+
+ ret = af9035_wr_reg_mask(d, 0xd8b7, 0x00, 0x01);
+ if (ret < 0)
+ goto err;
+
+ msleep(200);
+
+ ret = af9035_wr_reg_mask(d, 0xd8b7, 0x01, 0x01);
+ if (ret < 0)
+ goto err;
+
+ memset(&si2157_config, 0, sizeof(si2157_config));
+ si2157_config.fe = adap->fe[0];
+ ret = af9035_add_i2c_dev(d, "si2157", 0x63,
+ &si2157_config, state->i2c_adapter_demod);
+
+ if (ret)
+ goto err;
+
+ return 0;
+
+err:
+ dev_dbg(&d->udev->dev, "%s: failed=%d\n", __func__, ret);
+
+ return ret;
+}
+
+
+static int it930x_tuner_detach(struct dvb_usb_adapter *adap)
+{
+ struct state *state = adap_to_priv(adap);
+ struct dvb_usb_device *d = adap_to_d(adap);
+
+ dev_dbg(&d->udev->dev, "adap->id=%d\n", adap->id);
+
+ if (adap->id == 1) {
+ if (state->i2c_client[3])
+ af9035_del_i2c_dev(d);
+ } else if (adap->id == 0) {
+ if (state->i2c_client[1])
+ af9035_del_i2c_dev(d);
+ }
+
+ return 0;
+}
+
+
+static int af9035_tuner_detach(struct dvb_usb_adapter *adap)
+{
+ struct state *state = adap_to_priv(adap);
+ struct dvb_usb_device *d = adap_to_d(adap);
+
+ dev_dbg(&d->udev->dev, "%s: adap->id=%d\n", __func__, adap->id);
+
+ switch (state->af9033_config[adap->id].tuner) {
+ case AF9033_TUNER_IT9135_38:
+ case AF9033_TUNER_IT9135_51:
+ case AF9033_TUNER_IT9135_52:
+ case AF9033_TUNER_IT9135_60:
+ case AF9033_TUNER_IT9135_61:
+ case AF9033_TUNER_IT9135_62:
+ if (adap->id == 1) {
+ if (state->i2c_client[3])
+ af9035_del_i2c_dev(d);
+ } else if (adap->id == 0) {
+ if (state->i2c_client[1])
+ af9035_del_i2c_dev(d);
+ }
+ }
+
+ return 0;
+}
+
+static int af9035_init(struct dvb_usb_device *d)
+{
+ struct state *state = d_to_priv(d);
+ int ret, i;
+ u16 frame_size = (d->udev->speed == USB_SPEED_FULL ? 5 : 87) * 188 / 4;
+ u8 packet_size = (d->udev->speed == USB_SPEED_FULL ? 64 : 512) / 4;
+ struct reg_val_mask tab[] = {
+ { 0x80f99d, 0x01, 0x01 },
+ { 0x80f9a4, 0x01, 0x01 },
+ { 0x00dd11, 0x00, 0x20 },
+ { 0x00dd11, 0x00, 0x40 },
+ { 0x00dd13, 0x00, 0x20 },
+ { 0x00dd13, 0x00, 0x40 },
+ { 0x00dd11, 0x20, 0x20 },
+ { 0x00dd88, (frame_size >> 0) & 0xff, 0xff},
+ { 0x00dd89, (frame_size >> 8) & 0xff, 0xff},
+ { 0x00dd0c, packet_size, 0xff},
+ { 0x00dd11, state->dual_mode << 6, 0x40 },
+ { 0x00dd8a, (frame_size >> 0) & 0xff, 0xff},
+ { 0x00dd8b, (frame_size >> 8) & 0xff, 0xff},
+ { 0x00dd0d, packet_size, 0xff },
+ { 0x80f9a3, state->dual_mode, 0x01 },
+ { 0x80f9cd, state->dual_mode, 0x01 },
+ { 0x80f99d, 0x00, 0x01 },
+ { 0x80f9a4, 0x00, 0x01 },
+ };
+
+ dev_dbg(&d->udev->dev,
+ "%s: USB speed=%d frame_size=%04x packet_size=%02x\n",
+ __func__, d->udev->speed, frame_size, packet_size);
+
+ /* init endpoints */
+ for (i = 0; i < ARRAY_SIZE(tab); i++) {
+ ret = af9035_wr_reg_mask(d, tab[i].reg, tab[i].val,
+ tab[i].mask);
+ if (ret < 0)
+ goto err;
+ }
+
+ return 0;
+
+err:
+ dev_dbg(&d->udev->dev, "%s: failed=%d\n", __func__, ret);
+
+ return ret;
+}
+
+static int it930x_init(struct dvb_usb_device *d)
+{
+ struct state *state = d_to_priv(d);
+ int ret, i;
+ u16 frame_size = (d->udev->speed == USB_SPEED_FULL ? 5 : 816) * 188 / 4;
+ u8 packet_size = (d->udev->speed == USB_SPEED_FULL ? 64 : 512) / 4;
+ struct reg_val_mask tab[] = {
+ { 0x00da1a, 0x00, 0x01 }, /* ignore_sync_byte */
+ { 0x00f41f, 0x04, 0x04 }, /* dvbt_inten */
+ { 0x00da10, 0x00, 0x01 }, /* mpeg_full_speed */
+ { 0x00f41a, 0x01, 0x01 }, /* dvbt_en */
+ { 0x00da1d, 0x01, 0x01 }, /* mp2_sw_rst, reset EP4 */
+ { 0x00dd11, 0x00, 0x20 }, /* ep4_tx_en, disable EP4 */
+ { 0x00dd13, 0x00, 0x20 }, /* ep4_tx_nak, disable EP4 NAK */
+ { 0x00dd11, 0x20, 0x20 }, /* ep4_tx_en, enable EP4 */
+ { 0x00dd11, 0x00, 0x40 }, /* ep5_tx_en, disable EP5 */
+ { 0x00dd13, 0x00, 0x40 }, /* ep5_tx_nak, disable EP5 NAK */
+ { 0x00dd11, state->dual_mode << 6, 0x40 }, /* enable EP5 */
+ { 0x00dd88, (frame_size >> 0) & 0xff, 0xff},
+ { 0x00dd89, (frame_size >> 8) & 0xff, 0xff},
+ { 0x00dd0c, packet_size, 0xff},
+ { 0x00dd8a, (frame_size >> 0) & 0xff, 0xff},
+ { 0x00dd8b, (frame_size >> 8) & 0xff, 0xff},
+ { 0x00dd0d, packet_size, 0xff },
+ { 0x00da1d, 0x00, 0x01 }, /* mp2_sw_rst, disable */
+ { 0x00d833, 0x01, 0xff }, /* slew rate ctrl: slew rate boosts */
+ { 0x00d830, 0x00, 0xff }, /* Bit 0 of output driving control */
+ { 0x00d831, 0x01, 0xff }, /* Bit 1 of output driving control */
+ { 0x00d832, 0x00, 0xff }, /* Bit 2 of output driving control */
+
+ /* suspend gpio1 for TS-C */
+ { 0x00d8b0, 0x01, 0xff }, /* gpio1 */
+ { 0x00d8b1, 0x01, 0xff }, /* gpio1 */
+ { 0x00d8af, 0x00, 0xff }, /* gpio1 */
+
+ /* suspend gpio7 for TS-D */
+ { 0x00d8c4, 0x01, 0xff }, /* gpio7 */
+ { 0x00d8c5, 0x01, 0xff }, /* gpio7 */
+ { 0x00d8c3, 0x00, 0xff }, /* gpio7 */
+
+ /* suspend gpio13 for TS-B */
+ { 0x00d8dc, 0x01, 0xff }, /* gpio13 */
+ { 0x00d8dd, 0x01, 0xff }, /* gpio13 */
+ { 0x00d8db, 0x00, 0xff }, /* gpio13 */
+
+ /* suspend gpio14 for TS-E */
+ { 0x00d8e4, 0x01, 0xff }, /* gpio14 */
+ { 0x00d8e5, 0x01, 0xff }, /* gpio14 */
+ { 0x00d8e3, 0x00, 0xff }, /* gpio14 */
+
+ /* suspend gpio15 for TS-A */
+ { 0x00d8e8, 0x01, 0xff }, /* gpio15 */
+ { 0x00d8e9, 0x01, 0xff }, /* gpio15 */
+ { 0x00d8e7, 0x00, 0xff }, /* gpio15 */
+
+ { 0x00da58, 0x00, 0x01 }, /* ts_in_src, serial */
+ { 0x00da73, 0x01, 0xff }, /* ts0_aggre_mode */
+ { 0x00da78, 0x47, 0xff }, /* ts0_sync_byte */
+ { 0x00da4c, 0x01, 0xff }, /* ts0_en */
+ { 0x00da5a, 0x1f, 0xff }, /* ts_fail_ignore */
+ };
+
+ dev_dbg(&d->udev->dev,
+ "%s: USB speed=%d frame_size=%04x packet_size=%02x\n",
+ __func__, d->udev->speed, frame_size, packet_size);
+
+ /* init endpoints */
+ for (i = 0; i < ARRAY_SIZE(tab); i++) {
+ ret = af9035_wr_reg_mask(d, tab[i].reg,
+ tab[i].val, tab[i].mask);
+
+ if (ret < 0)
+ goto err;
+ }
+
+ return 0;
+err:
+ dev_dbg(&d->udev->dev, "%s: failed=%d\n", __func__, ret);
+
+ return ret;
+}
+
+
+#if IS_ENABLED(CONFIG_RC_CORE)
+static int af9035_rc_query(struct dvb_usb_device *d)
+{
+ int ret;
+ u32 key;
+ u8 buf[4];
+ struct usb_req req = { CMD_IR_GET, 0, 0, NULL, 4, buf };
+
+ ret = af9035_ctrl_msg(d, &req);
+ if (ret == 1)
+ return 0;
+ else if (ret < 0)
+ goto err;
+
+ if ((buf[2] + buf[3]) == 0xff) {
+ if ((buf[0] + buf[1]) == 0xff) {
+ /* NEC standard 16bit */
+ key = RC_SCANCODE_NEC(buf[0], buf[2]);
+ } else {
+ /* NEC extended 24bit */
+ key = RC_SCANCODE_NECX(buf[0] << 8 | buf[1], buf[2]);
+ }
+ } else {
+ /* NEC full code 32bit */
+ key = RC_SCANCODE_NEC32(buf[0] << 24 | buf[1] << 16 |
+ buf[2] << 8 | buf[3]);
+ }
+
+ dev_dbg(&d->udev->dev, "%s: %*ph\n", __func__, 4, buf);
+
+ rc_keydown(d->rc_dev, RC_TYPE_NEC, key, 0);
+
+ return 0;
+
+err:
+ dev_dbg(&d->udev->dev, "%s: failed=%d\n", __func__, ret);
+
+ return ret;
+}
+
+static int af9035_get_rc_config(struct dvb_usb_device *d, struct dvb_usb_rc *rc)
+{
+ struct state *state = d_to_priv(d);
+ int ret;
+ u8 tmp;
+
+ ret = af9035_rd_reg(d, state->eeprom_addr + EEPROM_IR_MODE, &tmp);
+ if (ret < 0)
+ goto err;
+
+ dev_dbg(&d->udev->dev, "%s: ir_mode=%02x\n", __func__, tmp);
+
+ /* don't activate rc if in HID mode or if not available */
+ if (tmp == 5) {
+ ret = af9035_rd_reg(d, state->eeprom_addr + EEPROM_IR_TYPE,
+ &tmp);
+ if (ret < 0)
+ goto err;
+
+ dev_dbg(&d->udev->dev, "%s: ir_type=%02x\n", __func__, tmp);
+
+ switch (tmp) {
+ case 0: /* NEC */
+ default:
+ rc->allowed_protos = RC_BIT_NEC;
+ break;
+ case 1: /* RC6 */
+ rc->allowed_protos = RC_BIT_RC6_MCE;
+ break;
+ }
+
+ rc->query = af9035_rc_query;
+ rc->interval = 500;
+
+ /* load empty to enable rc */
+ if (!rc->map_name)
+ rc->map_name = RC_MAP_EMPTY;
+ }
+
+ return 0;
+
+err:
+ dev_dbg(&d->udev->dev, "%s: failed=%d\n", __func__, ret);
+
+ return ret;
+}
+#else
+ #define af9035_get_rc_config NULL
+#endif
+
+static int af9035_get_stream_config(struct dvb_frontend *fe, u8 *ts_type,
+ struct usb_data_stream_properties *stream)
+{
+ struct dvb_usb_device *d = fe_to_d(fe);
+
+ dev_dbg(&d->udev->dev, "%s: adap=%d\n", __func__, fe_to_adap(fe)->id);
+
+ if (d->udev->speed == USB_SPEED_FULL)
+ stream->u.bulk.buffersize = 5 * 188;
+
+ return 0;
+}
+
+static int af9035_pid_filter_ctrl(struct dvb_usb_adapter *adap, int onoff)
+{
+ struct state *state = adap_to_priv(adap);
+
+ return state->ops.pid_filter_ctrl(adap->fe[0], onoff);
+}
+
+static int af9035_pid_filter(struct dvb_usb_adapter *adap, int index, u16 pid,
+ int onoff)
+{
+ struct state *state = adap_to_priv(adap);
+
+ return state->ops.pid_filter(adap->fe[0], index, pid, onoff);
+}
+
+static int af9035_probe(struct usb_interface *intf,
+ const struct usb_device_id *id)
+{
+ struct usb_device *udev = interface_to_usbdev(intf);
+ char manufacturer[sizeof("Afatech")];
+
+ memset(manufacturer, 0, sizeof(manufacturer));
+ usb_string(udev, udev->descriptor.iManufacturer,
+ manufacturer, sizeof(manufacturer));
+ /*
+ * There is two devices having same ID but different chipset. One uses
+ * AF9015 and the other IT9135 chipset. Only difference seen on lsusb
+ * is iManufacturer string.
+ *
+ * idVendor 0x0ccd TerraTec Electronic GmbH
+ * idProduct 0x0099
+ * bcdDevice 2.00
+ * iManufacturer 1 Afatech
+ * iProduct 2 DVB-T 2
+ *
+ * idVendor 0x0ccd TerraTec Electronic GmbH
+ * idProduct 0x0099
+ * bcdDevice 2.00
+ * iManufacturer 1 ITE Technologies, Inc.
+ * iProduct 2 DVB-T TV Stick
+ */
+ if ((le16_to_cpu(udev->descriptor.idVendor) == USB_VID_TERRATEC) &&
+ (le16_to_cpu(udev->descriptor.idProduct) == 0x0099)) {
+ if (!strcmp("Afatech", manufacturer)) {
+ dev_dbg(&udev->dev, "%s: rejecting device\n", __func__);
+ return -ENODEV;
+ }
+ }
+
+ return dvb_usbv2_probe(intf, id);
+}
+
+/* interface 0 is used by DVB-T receiver and
+ interface 1 is for remote controller (HID) */
+static const struct dvb_usb_device_properties af9035_props = {
+ .driver_name = KBUILD_MODNAME,
+ .owner = THIS_MODULE,
+ .adapter_nr = adapter_nr,
+ .size_of_priv = sizeof(struct state),
+
+ .generic_bulk_ctrl_endpoint = 0x02,
+ .generic_bulk_ctrl_endpoint_response = 0x81,
+
+ .identify_state = af9035_identify_state,
+ .download_firmware = af9035_download_firmware,
+
+ .i2c_algo = &af9035_i2c_algo,
+ .read_config = af9035_read_config,
+ .frontend_attach = af9035_frontend_attach,
+ .frontend_detach = af9035_frontend_detach,
+ .tuner_attach = af9035_tuner_attach,
+ .tuner_detach = af9035_tuner_detach,
+ .init = af9035_init,
+ .get_rc_config = af9035_get_rc_config,
+ .get_stream_config = af9035_get_stream_config,
+
+ .get_adapter_count = af9035_get_adapter_count,
+ .adapter = {
+ {
+ .caps = DVB_USB_ADAP_HAS_PID_FILTER |
+ DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
+
+ .pid_filter_count = 32,
+ .pid_filter_ctrl = af9035_pid_filter_ctrl,
+ .pid_filter = af9035_pid_filter,
+
+ .stream = DVB_USB_STREAM_BULK(0x84, 6, 87 * 188),
+ }, {
+ .caps = DVB_USB_ADAP_HAS_PID_FILTER |
+ DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
+
+ .pid_filter_count = 32,
+ .pid_filter_ctrl = af9035_pid_filter_ctrl,
+ .pid_filter = af9035_pid_filter,
+
+ .stream = DVB_USB_STREAM_BULK(0x85, 6, 87 * 188),
+ },
+ },
+};
+
+static const struct dvb_usb_device_properties it930x_props = {
+ .driver_name = KBUILD_MODNAME,
+ .owner = THIS_MODULE,
+ .adapter_nr = adapter_nr,
+ .size_of_priv = sizeof(struct state),
+
+ .generic_bulk_ctrl_endpoint = 0x02,
+ .generic_bulk_ctrl_endpoint_response = 0x81,
+
+ .identify_state = af9035_identify_state,
+ .download_firmware = af9035_download_firmware,
+
+ .i2c_algo = &af9035_i2c_algo,
+ .read_config = af9035_read_config,
+ .frontend_attach = it930x_frontend_attach,
+ .frontend_detach = af9035_frontend_detach,
+ .tuner_attach = it930x_tuner_attach,
+ .tuner_detach = it930x_tuner_detach,
+ .init = it930x_init,
+ .get_stream_config = af9035_get_stream_config,
+
+ .get_adapter_count = af9035_get_adapter_count,
+ .adapter = {
+ {
+ .stream = DVB_USB_STREAM_BULK(0x84, 4, 816 * 188),
+ }, {
+ .stream = DVB_USB_STREAM_BULK(0x85, 4, 816 * 188),
+ },
+ },
+};
+
+static const struct usb_device_id af9035_id_table[] = {
+ /* AF9035 devices */
+ { DVB_USB_DEVICE(USB_VID_AFATECH, USB_PID_AFATECH_AF9035_9035,
+ &af9035_props, "Afatech AF9035 reference design", NULL) },
+ { DVB_USB_DEVICE(USB_VID_AFATECH, USB_PID_AFATECH_AF9035_1000,
+ &af9035_props, "Afatech AF9035 reference design", NULL) },
+ { DVB_USB_DEVICE(USB_VID_AFATECH, USB_PID_AFATECH_AF9035_1001,
+ &af9035_props, "Afatech AF9035 reference design", NULL) },
+ { DVB_USB_DEVICE(USB_VID_AFATECH, USB_PID_AFATECH_AF9035_1002,
+ &af9035_props, "Afatech AF9035 reference design", NULL) },
+ { DVB_USB_DEVICE(USB_VID_AFATECH, USB_PID_AFATECH_AF9035_1003,
+ &af9035_props, "Afatech AF9035 reference design", NULL) },
+ { DVB_USB_DEVICE(USB_VID_TERRATEC, USB_PID_TERRATEC_CINERGY_T_STICK,
+ &af9035_props, "TerraTec Cinergy T Stick", NULL) },
+ { DVB_USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_A835,
+ &af9035_props, "AVerMedia AVerTV Volar HD/PRO (A835)", NULL) },
+ { DVB_USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_B835,
+ &af9035_props, "AVerMedia AVerTV Volar HD/PRO (A835)", NULL) },
+ { DVB_USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_1867,
+ &af9035_props, "AVerMedia HD Volar (A867)", NULL) },
+ { DVB_USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_A867,
+ &af9035_props, "AVerMedia HD Volar (A867)", NULL) },
+ { DVB_USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_TWINSTAR,
+ &af9035_props, "AVerMedia Twinstar (A825)", NULL) },
+ { DVB_USB_DEVICE(USB_VID_ASUS, USB_PID_ASUS_U3100MINI_PLUS,
+ &af9035_props, "Asus U3100Mini Plus", NULL) },
+ { DVB_USB_DEVICE(USB_VID_TERRATEC, 0x00aa,
+ &af9035_props, "TerraTec Cinergy T Stick (rev. 2)", NULL) },
+ /* IT9135 devices */
+ { DVB_USB_DEVICE(USB_VID_ITETECH, USB_PID_ITETECH_IT9135,
+ &af9035_props, "ITE 9135 Generic", RC_MAP_IT913X_V1) },
+ { DVB_USB_DEVICE(USB_VID_ITETECH, USB_PID_ITETECH_IT9135_9005,
+ &af9035_props, "ITE 9135(9005) Generic", RC_MAP_IT913X_V2) },
+ { DVB_USB_DEVICE(USB_VID_ITETECH, USB_PID_ITETECH_IT9135_9006,
+ &af9035_props, "ITE 9135(9006) Generic", RC_MAP_IT913X_V1) },
+ { DVB_USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_A835B_1835,
+ &af9035_props, "Avermedia A835B(1835)", RC_MAP_IT913X_V2) },
+ { DVB_USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_A835B_2835,
+ &af9035_props, "Avermedia A835B(2835)", RC_MAP_IT913X_V2) },
+ { DVB_USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_A835B_3835,
+ &af9035_props, "Avermedia A835B(3835)", RC_MAP_IT913X_V2) },
+ { DVB_USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_A835B_4835,
+ &af9035_props, "Avermedia A835B(4835)", RC_MAP_IT913X_V2) },
+ { DVB_USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_H335,
+ &af9035_props, "Avermedia H335", RC_MAP_IT913X_V2) },
+ { DVB_USB_DEVICE(USB_VID_KWORLD_2, USB_PID_KWORLD_UB499_2T_T09,
+ &af9035_props, "Kworld UB499-2T T09", RC_MAP_IT913X_V1) },
+ { DVB_USB_DEVICE(USB_VID_KWORLD_2, USB_PID_SVEON_STV22_IT9137,
+ &af9035_props, "Sveon STV22 Dual DVB-T HDTV",
+ RC_MAP_IT913X_V1) },
+ { DVB_USB_DEVICE(USB_VID_KWORLD_2, USB_PID_CTVDIGDUAL_V2,
+ &af9035_props, "Digital Dual TV Receiver CTVDIGDUAL_V2",
+ RC_MAP_IT913X_V1) },
+ /* IT930x devices */
+ { DVB_USB_DEVICE(USB_VID_ITETECH, USB_PID_ITETECH_IT9303,
+ &it930x_props, "ITE 9303 Generic", NULL) },
+ /* XXX: that same ID [0ccd:0099] is used by af9015 driver too */
+ { DVB_USB_DEVICE(USB_VID_TERRATEC, 0x0099,
+ &af9035_props, "TerraTec Cinergy T Stick Dual RC (rev. 2)",
+ NULL) },
+ { DVB_USB_DEVICE(USB_VID_LEADTEK, 0x6a05,
+ &af9035_props, "Leadtek WinFast DTV Dongle Dual", NULL) },
+ { DVB_USB_DEVICE(USB_VID_HAUPPAUGE, 0xf900,
+ &af9035_props, "Hauppauge WinTV-MiniStick 2", NULL) },
+ { DVB_USB_DEVICE(USB_VID_PCTV, USB_PID_PCTV_78E,
+ &af9035_props, "PCTV AndroiDTV (78e)", RC_MAP_IT913X_V1) },
+ { DVB_USB_DEVICE(USB_VID_PCTV, USB_PID_PCTV_79E,
+ &af9035_props, "PCTV microStick (79e)", RC_MAP_IT913X_V2) },
+ { }
+};
+MODULE_DEVICE_TABLE(usb, af9035_id_table);
+
+static struct usb_driver af9035_usb_driver = {
+ .name = KBUILD_MODNAME,
+ .id_table = af9035_id_table,
+ .probe = af9035_probe,
+ .disconnect = dvb_usbv2_disconnect,
+ .suspend = dvb_usbv2_suspend,
+ .resume = dvb_usbv2_resume,
+ .reset_resume = dvb_usbv2_reset_resume,
+ .no_dynamic_id = 1,
+ .soft_unbind = 1,
+};
+
+module_usb_driver(af9035_usb_driver);
+
+MODULE_AUTHOR("Antti Palosaari <crope@iki.fi>");
+MODULE_DESCRIPTION("Afatech AF9035 driver");
+MODULE_LICENSE("GPL");
+MODULE_FIRMWARE(AF9035_FIRMWARE_AF9035);
+MODULE_FIRMWARE(AF9035_FIRMWARE_IT9135_V1);
+MODULE_FIRMWARE(AF9035_FIRMWARE_IT9135_V2);
+MODULE_FIRMWARE(AF9035_FIRMWARE_IT9303);
diff --git a/kernel/drivers/media/usb/dvb-usb-v2/af9035.h b/kernel/drivers/media/usb/dvb-usb-v2/af9035.h
new file mode 100644
index 000000000..416a97f05
--- /dev/null
+++ b/kernel/drivers/media/usb/dvb-usb-v2/af9035.h
@@ -0,0 +1,150 @@
+/*
+ * Afatech AF9035 DVB USB driver
+ *
+ * Copyright (C) 2009 Antti Palosaari <crope@iki.fi>
+ * Copyright (C) 2012 Antti Palosaari <crope@iki.fi>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+
+#ifndef AF9035_H
+#define AF9035_H
+
+#include "dvb_usb.h"
+#include "af9033.h"
+#include "tua9001.h"
+#include "fc0011.h"
+#include "fc0012.h"
+#include "mxl5007t.h"
+#include "tda18218.h"
+#include "fc2580.h"
+#include "it913x.h"
+#include "si2168.h"
+#include "si2157.h"
+
+struct reg_val {
+ u32 reg;
+ u8 val;
+};
+
+struct reg_val_mask {
+ u32 reg;
+ u8 val;
+ u8 mask;
+};
+
+struct usb_req {
+ u8 cmd;
+ u8 mbox;
+ u8 wlen;
+ u8 *wbuf;
+ u8 rlen;
+ u8 *rbuf;
+};
+
+struct state {
+#define BUF_LEN 64
+ u8 buf[BUF_LEN];
+ u8 seq; /* packet sequence number */
+ u8 prechip_version;
+ u8 chip_version;
+ u16 chip_type;
+ u8 dual_mode:1;
+ u16 eeprom_addr;
+ u8 af9033_i2c_addr[2];
+ struct af9033_config af9033_config[2];
+ struct af9033_ops ops;
+ #define AF9035_I2C_CLIENT_MAX 4
+ struct i2c_client *i2c_client[AF9035_I2C_CLIENT_MAX];
+ struct i2c_adapter *i2c_adapter_demod;
+};
+
+static const u32 clock_lut_af9035[] = {
+ 20480000, /* FPGA */
+ 16384000, /* 16.38 MHz */
+ 20480000, /* 20.48 MHz */
+ 36000000, /* 36.00 MHz */
+ 30000000, /* 30.00 MHz */
+ 26000000, /* 26.00 MHz */
+ 28000000, /* 28.00 MHz */
+ 32000000, /* 32.00 MHz */
+ 34000000, /* 34.00 MHz */
+ 24000000, /* 24.00 MHz */
+ 22000000, /* 22.00 MHz */
+ 12000000, /* 12.00 MHz */
+};
+
+static const u32 clock_lut_it9135[] = {
+ 12000000, /* 12.00 MHz */
+ 20480000, /* 20.48 MHz */
+ 36000000, /* 36.00 MHz */
+ 30000000, /* 30.00 MHz */
+ 26000000, /* 26.00 MHz */
+ 28000000, /* 28.00 MHz */
+ 32000000, /* 32.00 MHz */
+ 34000000, /* 34.00 MHz */
+ 24000000, /* 24.00 MHz */
+ 22000000, /* 22.00 MHz */
+};
+
+#define AF9035_FIRMWARE_AF9035 "dvb-usb-af9035-02.fw"
+#define AF9035_FIRMWARE_IT9135_V1 "dvb-usb-it9135-01.fw"
+#define AF9035_FIRMWARE_IT9135_V2 "dvb-usb-it9135-02.fw"
+#define AF9035_FIRMWARE_IT9303 "dvb-usb-it9303-01.fw"
+
+/*
+ * eeprom is memory mapped as read only. Writing that memory mapped address
+ * will not corrupt eeprom.
+ *
+ * TS mode:
+ * 0 TS
+ * 1 DCA + PIP
+ * 3 PIP
+ * n DCA
+ *
+ * Values 0 and 3 are seen to this day. 0 for single TS and 3 for dual TS.
+ */
+
+#define EEPROM_BASE_AF9035 0x42fd
+#define EEPROM_BASE_IT9135 0x499c
+#define EEPROM_SHIFT 0x10
+
+#define EEPROM_IR_MODE 0x10
+#define EEPROM_TS_MODE 0x29
+#define EEPROM_2ND_DEMOD_ADDR 0x2a
+#define EEPROM_IR_TYPE 0x2c
+#define EEPROM_1_IF_L 0x30
+#define EEPROM_1_IF_H 0x31
+#define EEPROM_1_TUNER_ID 0x34
+#define EEPROM_2_IF_L 0x40
+#define EEPROM_2_IF_H 0x41
+#define EEPROM_2_TUNER_ID 0x44
+
+/* USB commands */
+#define CMD_MEM_RD 0x00
+#define CMD_MEM_WR 0x01
+#define CMD_I2C_RD 0x02
+#define CMD_I2C_WR 0x03
+#define CMD_IR_GET 0x18
+#define CMD_FW_DL 0x21
+#define CMD_FW_QUERYINFO 0x22
+#define CMD_FW_BOOT 0x23
+#define CMD_FW_DL_BEGIN 0x24
+#define CMD_FW_DL_END 0x25
+#define CMD_FW_SCATTER_WR 0x29
+#define CMD_GENERIC_I2C_RD 0x2a
+#define CMD_GENERIC_I2C_WR 0x2b
+
+#endif
diff --git a/kernel/drivers/media/usb/dvb-usb-v2/anysee.c b/kernel/drivers/media/usb/dvb-usb-v2/anysee.c
new file mode 100644
index 000000000..ae917c042
--- /dev/null
+++ b/kernel/drivers/media/usb/dvb-usb-v2/anysee.c
@@ -0,0 +1,1442 @@
+/*
+ * DVB USB Linux driver for Anysee E30 DVB-C & DVB-T USB2.0 receiver
+ *
+ * Copyright (C) 2007 Antti Palosaari <crope@iki.fi>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ * TODO:
+ * - add smart card reader support for Conditional Access (CA)
+ *
+ * Card reader in Anysee is nothing more than ISO 7816 card reader.
+ * There is no hardware CAM in any Anysee device sold.
+ * In my understanding it should be implemented by making own module
+ * for ISO 7816 card reader, like dvb_ca_en50221 is implemented. This
+ * module registers serial interface that can be used to communicate
+ * with any ISO 7816 smart card.
+ *
+ * Any help according to implement serial smart card reader support
+ * is highly welcome!
+ */
+
+#include "anysee.h"
+#include "dvb-pll.h"
+#include "tda1002x.h"
+#include "mt352.h"
+#include "mt352_priv.h"
+#include "zl10353.h"
+#include "tda18212.h"
+#include "cx24116.h"
+#include "stv0900.h"
+#include "stv6110.h"
+#include "isl6423.h"
+#include "cxd2820r.h"
+
+DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
+
+static int anysee_ctrl_msg(struct dvb_usb_device *d,
+ u8 *sbuf, u8 slen, u8 *rbuf, u8 rlen)
+{
+ struct anysee_state *state = d_to_priv(d);
+ int act_len, ret, i;
+
+ mutex_lock(&d->usb_mutex);
+
+ memcpy(&state->buf[0], sbuf, slen);
+ state->buf[60] = state->seq++;
+
+ dev_dbg(&d->udev->dev, "%s: >>> %*ph\n", __func__, slen, state->buf);
+
+ /* We need receive one message more after dvb_usb_generic_rw due
+ to weird transaction flow, which is 1 x send + 2 x receive. */
+ ret = dvb_usbv2_generic_rw_locked(d, state->buf, sizeof(state->buf),
+ state->buf, sizeof(state->buf));
+ if (ret)
+ goto error_unlock;
+
+ /* TODO FIXME: dvb_usb_generic_rw() fails rarely with error code -32
+ * (EPIPE, Broken pipe). Function supports currently msleep() as a
+ * parameter but I would not like to use it, since according to
+ * Documentation/timers/timers-howto.txt it should not be used such
+ * short, under < 20ms, sleeps. Repeating failed message would be
+ * better choice as not to add unwanted delays...
+ * Fixing that correctly is one of those or both;
+ * 1) use repeat if possible
+ * 2) add suitable delay
+ */
+
+ /* get answer, retry few times if error returned */
+ for (i = 0; i < 3; i++) {
+ /* receive 2nd answer */
+ ret = usb_bulk_msg(d->udev, usb_rcvbulkpipe(d->udev,
+ d->props->generic_bulk_ctrl_endpoint),
+ state->buf, sizeof(state->buf), &act_len, 2000);
+ if (ret) {
+ dev_dbg(&d->udev->dev,
+ "%s: recv bulk message failed=%d\n",
+ __func__, ret);
+ } else {
+ dev_dbg(&d->udev->dev, "%s: <<< %*ph\n", __func__,
+ rlen, state->buf);
+
+ if (state->buf[63] != 0x4f)
+ dev_dbg(&d->udev->dev,
+ "%s: cmd failed\n", __func__);
+ break;
+ }
+ }
+
+ if (ret) {
+ /* all retries failed, it is fatal */
+ dev_err(&d->udev->dev, "%s: recv bulk message failed=%d\n",
+ KBUILD_MODNAME, ret);
+ goto error_unlock;
+ }
+
+ /* read request, copy returned data to return buf */
+ if (rbuf && rlen)
+ memcpy(rbuf, state->buf, rlen);
+
+error_unlock:
+ mutex_unlock(&d->usb_mutex);
+ return ret;
+}
+
+static int anysee_read_reg(struct dvb_usb_device *d, u16 reg, u8 *val)
+{
+ u8 buf[] = {CMD_REG_READ, reg >> 8, reg & 0xff, 0x01};
+ int ret;
+ ret = anysee_ctrl_msg(d, buf, sizeof(buf), val, 1);
+ dev_dbg(&d->udev->dev, "%s: reg=%04x val=%02x\n", __func__, reg, *val);
+ return ret;
+}
+
+static int anysee_write_reg(struct dvb_usb_device *d, u16 reg, u8 val)
+{
+ u8 buf[] = {CMD_REG_WRITE, reg >> 8, reg & 0xff, 0x01, val};
+ dev_dbg(&d->udev->dev, "%s: reg=%04x val=%02x\n", __func__, reg, val);
+ return anysee_ctrl_msg(d, buf, sizeof(buf), NULL, 0);
+}
+
+/* write single register with mask */
+static int anysee_wr_reg_mask(struct dvb_usb_device *d, u16 reg, u8 val,
+ u8 mask)
+{
+ int ret;
+ u8 tmp;
+
+ /* no need for read if whole reg is written */
+ if (mask != 0xff) {
+ ret = anysee_read_reg(d, reg, &tmp);
+ if (ret)
+ return ret;
+
+ val &= mask;
+ tmp &= ~mask;
+ val |= tmp;
+ }
+
+ return anysee_write_reg(d, reg, val);
+}
+
+/* read single register with mask */
+static int anysee_rd_reg_mask(struct dvb_usb_device *d, u16 reg, u8 *val,
+ u8 mask)
+{
+ int ret, i;
+ u8 tmp;
+
+ ret = anysee_read_reg(d, reg, &tmp);
+ if (ret)
+ return ret;
+
+ tmp &= mask;
+
+ /* find position of the first bit */
+ for (i = 0; i < 8; i++) {
+ if ((mask >> i) & 0x01)
+ break;
+ }
+ *val = tmp >> i;
+
+ return 0;
+}
+
+static int anysee_get_hw_info(struct dvb_usb_device *d, u8 *id)
+{
+ u8 buf[] = {CMD_GET_HW_INFO};
+ return anysee_ctrl_msg(d, buf, sizeof(buf), id, 3);
+}
+
+static int anysee_streaming_ctrl(struct dvb_frontend *fe, int onoff)
+{
+ u8 buf[] = {CMD_STREAMING_CTRL, (u8)onoff, 0x00};
+ dev_dbg(&fe_to_d(fe)->udev->dev, "%s: onoff=%d\n", __func__, onoff);
+ return anysee_ctrl_msg(fe_to_d(fe), buf, sizeof(buf), NULL, 0);
+}
+
+static int anysee_led_ctrl(struct dvb_usb_device *d, u8 mode, u8 interval)
+{
+ u8 buf[] = {CMD_LED_AND_IR_CTRL, 0x01, mode, interval};
+ dev_dbg(&d->udev->dev, "%s: state=%d interval=%d\n", __func__,
+ mode, interval);
+ return anysee_ctrl_msg(d, buf, sizeof(buf), NULL, 0);
+}
+
+static int anysee_ir_ctrl(struct dvb_usb_device *d, u8 onoff)
+{
+ u8 buf[] = {CMD_LED_AND_IR_CTRL, 0x02, onoff};
+ dev_dbg(&d->udev->dev, "%s: onoff=%d\n", __func__, onoff);
+ return anysee_ctrl_msg(d, buf, sizeof(buf), NULL, 0);
+}
+
+/* I2C */
+static int anysee_master_xfer(struct i2c_adapter *adap, struct i2c_msg *msg,
+ int num)
+{
+ struct dvb_usb_device *d = i2c_get_adapdata(adap);
+ int ret = 0, inc, i = 0;
+ u8 buf[52]; /* 4 + 48 (I2C WR USB command header + I2C WR max) */
+
+ if (mutex_lock_interruptible(&d->i2c_mutex) < 0)
+ return -EAGAIN;
+
+ while (i < num) {
+ if (num > i + 1 && (msg[i+1].flags & I2C_M_RD)) {
+ if (msg[i].len > 2 || msg[i+1].len > 60) {
+ ret = -EOPNOTSUPP;
+ break;
+ }
+ buf[0] = CMD_I2C_READ;
+ buf[1] = (msg[i].addr << 1) | 0x01;
+ buf[2] = msg[i].buf[0];
+ buf[3] = msg[i].buf[1];
+ buf[4] = msg[i].len-1;
+ buf[5] = msg[i+1].len;
+ ret = anysee_ctrl_msg(d, buf, 6, msg[i+1].buf,
+ msg[i+1].len);
+ inc = 2;
+ } else {
+ if (msg[i].len > 48) {
+ ret = -EOPNOTSUPP;
+ break;
+ }
+ buf[0] = CMD_I2C_WRITE;
+ buf[1] = (msg[i].addr << 1);
+ buf[2] = msg[i].len;
+ buf[3] = 0x01;
+ memcpy(&buf[4], msg[i].buf, msg[i].len);
+ ret = anysee_ctrl_msg(d, buf, 4 + msg[i].len, NULL, 0);
+ inc = 1;
+ }
+ if (ret)
+ break;
+
+ i += inc;
+ }
+
+ mutex_unlock(&d->i2c_mutex);
+
+ return ret ? ret : i;
+}
+
+static u32 anysee_i2c_func(struct i2c_adapter *adapter)
+{
+ return I2C_FUNC_I2C;
+}
+
+static struct i2c_algorithm anysee_i2c_algo = {
+ .master_xfer = anysee_master_xfer,
+ .functionality = anysee_i2c_func,
+};
+
+static int anysee_mt352_demod_init(struct dvb_frontend *fe)
+{
+ static u8 clock_config[] = { CLOCK_CTL, 0x38, 0x28 };
+ static u8 reset[] = { RESET, 0x80 };
+ static u8 adc_ctl_1_cfg[] = { ADC_CTL_1, 0x40 };
+ static u8 agc_cfg[] = { AGC_TARGET, 0x28, 0x20 };
+ static u8 gpp_ctl_cfg[] = { GPP_CTL, 0x33 };
+ static u8 capt_range_cfg[] = { CAPT_RANGE, 0x32 };
+
+ mt352_write(fe, clock_config, sizeof(clock_config));
+ udelay(200);
+ mt352_write(fe, reset, sizeof(reset));
+ mt352_write(fe, adc_ctl_1_cfg, sizeof(adc_ctl_1_cfg));
+
+ mt352_write(fe, agc_cfg, sizeof(agc_cfg));
+ mt352_write(fe, gpp_ctl_cfg, sizeof(gpp_ctl_cfg));
+ mt352_write(fe, capt_range_cfg, sizeof(capt_range_cfg));
+
+ return 0;
+}
+
+/* Callbacks for DVB USB */
+static struct tda10023_config anysee_tda10023_config = {
+ .demod_address = (0x1a >> 1),
+ .invert = 0,
+ .xtal = 16000000,
+ .pll_m = 11,
+ .pll_p = 3,
+ .pll_n = 1,
+ .output_mode = TDA10023_OUTPUT_MODE_PARALLEL_C,
+ .deltaf = 0xfeeb,
+};
+
+static struct mt352_config anysee_mt352_config = {
+ .demod_address = (0x1e >> 1),
+ .demod_init = anysee_mt352_demod_init,
+};
+
+static struct zl10353_config anysee_zl10353_config = {
+ .demod_address = (0x1e >> 1),
+ .parallel_ts = 1,
+};
+
+static struct zl10353_config anysee_zl10353_tda18212_config2 = {
+ .demod_address = (0x1e >> 1),
+ .parallel_ts = 1,
+ .disable_i2c_gate_ctrl = 1,
+ .no_tuner = 1,
+ .if2 = 41500,
+};
+
+static struct zl10353_config anysee_zl10353_tda18212_config = {
+ .demod_address = (0x18 >> 1),
+ .parallel_ts = 1,
+ .disable_i2c_gate_ctrl = 1,
+ .no_tuner = 1,
+ .if2 = 41500,
+};
+
+static struct tda10023_config anysee_tda10023_tda18212_config = {
+ .demod_address = (0x1a >> 1),
+ .xtal = 16000000,
+ .pll_m = 12,
+ .pll_p = 3,
+ .pll_n = 1,
+ .output_mode = TDA10023_OUTPUT_MODE_PARALLEL_B,
+ .deltaf = 0xba02,
+};
+
+static struct tda18212_config anysee_tda18212_config = {
+ .if_dvbt_6 = 4150,
+ .if_dvbt_7 = 4150,
+ .if_dvbt_8 = 4150,
+ .if_dvbc = 5000,
+};
+
+static struct tda18212_config anysee_tda18212_config2 = {
+ .if_dvbt_6 = 3550,
+ .if_dvbt_7 = 3700,
+ .if_dvbt_8 = 4150,
+ .if_dvbt2_6 = 3250,
+ .if_dvbt2_7 = 4000,
+ .if_dvbt2_8 = 4000,
+ .if_dvbc = 5000,
+};
+
+static struct cx24116_config anysee_cx24116_config = {
+ .demod_address = (0xaa >> 1),
+ .mpg_clk_pos_pol = 0x00,
+ .i2c_wr_max = 48,
+};
+
+static struct stv0900_config anysee_stv0900_config = {
+ .demod_address = (0xd0 >> 1),
+ .demod_mode = 0,
+ .xtal = 8000000,
+ .clkmode = 3,
+ .diseqc_mode = 2,
+ .tun1_maddress = 0,
+ .tun1_adc = 1, /* 1 Vpp */
+ .path1_mode = 3,
+};
+
+static struct stv6110_config anysee_stv6110_config = {
+ .i2c_address = (0xc0 >> 1),
+ .mclk = 16000000,
+ .clk_div = 1,
+};
+
+static struct isl6423_config anysee_isl6423_config = {
+ .current_max = SEC_CURRENT_800m,
+ .curlim = SEC_CURRENT_LIM_OFF,
+ .mod_extern = 1,
+ .addr = (0x10 >> 1),
+};
+
+static struct cxd2820r_config anysee_cxd2820r_config = {
+ .i2c_address = 0x6d, /* (0xda >> 1) */
+ .ts_mode = 0x38,
+};
+
+/*
+ * New USB device strings: Mfr=1, Product=2, SerialNumber=0
+ * Manufacturer: AMT.CO.KR
+ *
+ * E30 VID=04b4 PID=861f HW=2 FW=2.1 Product=????????
+ * PCB: ?
+ * parts: DNOS404ZH102A(MT352, DTT7579(?))
+ *
+ * E30 VID=04b4 PID=861f HW=2 FW=2.1 "anysee-T(LP)"
+ * PCB: PCB 507T (rev1.61)
+ * parts: DNOS404ZH103A(ZL10353, DTT7579(?))
+ * OEA=0a OEB=00 OEC=00 OED=ff OEE=00
+ * IOA=45 IOB=ff IOC=00 IOD=ff IOE=00
+ *
+ * E30 Plus VID=04b4 PID=861f HW=6 FW=1.0 "anysee"
+ * PCB: 507CD (rev1.1)
+ * parts: DNOS404ZH103A(ZL10353, DTT7579(?)), CST56I01
+ * OEA=80 OEB=00 OEC=00 OED=ff OEE=fe
+ * IOA=4f IOB=ff IOC=00 IOD=06 IOE=01
+ * IOD[0] ZL10353 1=enabled
+ * IOA[7] TS 0=enabled
+ * tuner is not behind ZL10353 I2C-gate (no care if gate disabled or not)
+ *
+ * E30 C Plus VID=04b4 PID=861f HW=10 FW=1.0 "anysee-DC(LP)"
+ * PCB: 507DC (rev0.2)
+ * parts: TDA10023, DTOS403IH102B TM, CST56I01
+ * OEA=80 OEB=00 OEC=00 OED=ff OEE=fe
+ * IOA=4f IOB=ff IOC=00 IOD=26 IOE=01
+ * IOD[0] TDA10023 1=enabled
+ *
+ * E30 S2 Plus VID=04b4 PID=861f HW=11 FW=0.1 "anysee-S2(LP)"
+ * PCB: 507SI (rev2.1)
+ * parts: BS2N10WCC01(CX24116, CX24118), ISL6423, TDA8024
+ * OEA=80 OEB=00 OEC=ff OED=ff OEE=fe
+ * IOA=4d IOB=ff IOC=00 IOD=26 IOE=01
+ * IOD[0] CX24116 1=enabled
+ *
+ * E30 C Plus VID=1c73 PID=861f HW=15 FW=1.2 "anysee-FA(LP)"
+ * PCB: 507FA (rev0.4)
+ * parts: TDA10023, DTOS403IH102B TM, TDA8024
+ * OEA=80 OEB=00 OEC=ff OED=ff OEE=ff
+ * IOA=4d IOB=ff IOC=00 IOD=00 IOE=c0
+ * IOD[5] TDA10023 1=enabled
+ * IOE[0] tuner 1=enabled
+ *
+ * E30 Combo Plus VID=1c73 PID=861f HW=15 FW=1.2 "anysee-FA(LP)"
+ * PCB: 507FA (rev1.1)
+ * parts: ZL10353, TDA10023, DTOS403IH102B TM, TDA8024
+ * OEA=80 OEB=00 OEC=ff OED=ff OEE=ff
+ * IOA=4d IOB=ff IOC=00 IOD=00 IOE=c0
+ * DVB-C:
+ * IOD[5] TDA10023 1=enabled
+ * IOE[0] tuner 1=enabled
+ * DVB-T:
+ * IOD[0] ZL10353 1=enabled
+ * IOE[0] tuner 0=enabled
+ * tuner is behind ZL10353 I2C-gate
+ * tuner is behind TDA10023 I2C-gate
+ *
+ * E7 TC VID=1c73 PID=861f HW=18 FW=0.7 AMTCI=0.5 "anysee-E7TC(LP)"
+ * PCB: 508TC (rev0.6)
+ * parts: ZL10353, TDA10023, DNOD44CDH086A(TDA18212)
+ * OEA=80 OEB=00 OEC=03 OED=f7 OEE=ff
+ * IOA=4d IOB=00 IOC=cc IOD=48 IOE=e4
+ * IOA[7] TS 1=enabled
+ * IOE[4] TDA18212 1=enabled
+ * DVB-C:
+ * IOD[6] ZL10353 0=disabled
+ * IOD[5] TDA10023 1=enabled
+ * IOE[0] IF 1=enabled
+ * DVB-T:
+ * IOD[5] TDA10023 0=disabled
+ * IOD[6] ZL10353 1=enabled
+ * IOE[0] IF 0=enabled
+ *
+ * E7 S2 VID=1c73 PID=861f HW=19 FW=0.4 AMTCI=0.5 "anysee-E7S2(LP)"
+ * PCB: 508S2 (rev0.7)
+ * parts: DNBU10512IST(STV0903, STV6110), ISL6423
+ * OEA=80 OEB=00 OEC=03 OED=f7 OEE=ff
+ * IOA=4d IOB=00 IOC=c4 IOD=08 IOE=e4
+ * IOA[7] TS 1=enabled
+ * IOE[5] STV0903 1=enabled
+ *
+ * E7 T2C VID=1c73 PID=861f HW=20 FW=0.1 AMTCI=0.5 "anysee-E7T2C(LP)"
+ * PCB: 508T2C (rev0.3)
+ * parts: DNOQ44QCH106A(CXD2820R, TDA18212), TDA8024
+ * OEA=80 OEB=00 OEC=03 OED=f7 OEE=ff
+ * IOA=4d IOB=00 IOC=cc IOD=48 IOE=e4
+ * IOA[7] TS 1=enabled
+ * IOE[5] CXD2820R 1=enabled
+ *
+ * E7 PTC VID=1c73 PID=861f HW=21 FW=0.1 AMTCI=?? "anysee-E7PTC(LP)"
+ * PCB: 508PTC (rev0.5)
+ * parts: ZL10353, TDA10023, DNOD44CDH086A(TDA18212)
+ * OEA=80 OEB=00 OEC=03 OED=f7 OEE=ff
+ * IOA=4d IOB=00 IOC=cc IOD=48 IOE=e4
+ * IOA[7] TS 1=enabled
+ * IOE[4] TDA18212 1=enabled
+ * DVB-C:
+ * IOD[6] ZL10353 0=disabled
+ * IOD[5] TDA10023 1=enabled
+ * IOE[0] IF 1=enabled
+ * DVB-T:
+ * IOD[5] TDA10023 0=disabled
+ * IOD[6] ZL10353 1=enabled
+ * IOE[0] IF 0=enabled
+ *
+ * E7 PS2 VID=1c73 PID=861f HW=22 FW=0.1 AMTCI=?? "anysee-E7PS2(LP)"
+ * PCB: 508PS2 (rev0.4)
+ * parts: DNBU10512IST(STV0903, STV6110), ISL6423
+ * OEA=80 OEB=00 OEC=03 OED=f7 OEE=ff
+ * IOA=4d IOB=00 IOC=c4 IOD=08 IOE=e4
+ * IOA[7] TS 1=enabled
+ * IOE[5] STV0903 1=enabled
+ */
+
+static int anysee_read_config(struct dvb_usb_device *d)
+{
+ struct anysee_state *state = d_to_priv(d);
+ int ret;
+ u8 hw_info[3];
+
+ /*
+ * Check which hardware we have.
+ * We must do this call two times to get reliable values (hw/fw bug).
+ */
+ ret = anysee_get_hw_info(d, hw_info);
+ if (ret)
+ goto error;
+
+ ret = anysee_get_hw_info(d, hw_info);
+ if (ret)
+ goto error;
+
+ /*
+ * Meaning of these info bytes are guessed.
+ */
+ dev_info(&d->udev->dev, "%s: firmware version %d.%d hardware id %d\n",
+ KBUILD_MODNAME, hw_info[1], hw_info[2], hw_info[0]);
+
+ state->hw = hw_info[0];
+error:
+ return ret;
+}
+
+/* external I2C gate used for DNOD44CDH086A(TDA18212) tuner module */
+static int anysee_i2c_gate_ctrl(struct dvb_frontend *fe, int enable)
+{
+ /* enable / disable tuner access on IOE[4] */
+ return anysee_wr_reg_mask(fe_to_d(fe), REG_IOE, (enable << 4), 0x10);
+}
+
+static int anysee_frontend_ctrl(struct dvb_frontend *fe, int onoff)
+{
+ struct anysee_state *state = fe_to_priv(fe);
+ struct dvb_usb_device *d = fe_to_d(fe);
+ int ret;
+ dev_dbg(&d->udev->dev, "%s: fe=%d onoff=%d\n", __func__, fe->id, onoff);
+
+ /* no frontend sleep control */
+ if (onoff == 0)
+ return 0;
+
+ switch (state->hw) {
+ case ANYSEE_HW_507FA: /* 15 */
+ /* E30 Combo Plus */
+ /* E30 C Plus */
+
+ if (fe->id == 0) {
+ /* disable DVB-T demod on IOD[0] */
+ ret = anysee_wr_reg_mask(d, REG_IOD, (0 << 0), 0x01);
+ if (ret)
+ goto error;
+
+ /* enable DVB-C demod on IOD[5] */
+ ret = anysee_wr_reg_mask(d, REG_IOD, (1 << 5), 0x20);
+ if (ret)
+ goto error;
+
+ /* enable DVB-C tuner on IOE[0] */
+ ret = anysee_wr_reg_mask(d, REG_IOE, (1 << 0), 0x01);
+ if (ret)
+ goto error;
+ } else {
+ /* disable DVB-C demod on IOD[5] */
+ ret = anysee_wr_reg_mask(d, REG_IOD, (0 << 5), 0x20);
+ if (ret)
+ goto error;
+
+ /* enable DVB-T demod on IOD[0] */
+ ret = anysee_wr_reg_mask(d, REG_IOD, (1 << 0), 0x01);
+ if (ret)
+ goto error;
+
+ /* enable DVB-T tuner on IOE[0] */
+ ret = anysee_wr_reg_mask(d, REG_IOE, (0 << 0), 0x01);
+ if (ret)
+ goto error;
+ }
+
+ break;
+ case ANYSEE_HW_508TC: /* 18 */
+ case ANYSEE_HW_508PTC: /* 21 */
+ /* E7 TC */
+ /* E7 PTC */
+
+ if (fe->id == 0) {
+ /* disable DVB-T demod on IOD[6] */
+ ret = anysee_wr_reg_mask(d, REG_IOD, (0 << 6), 0x40);
+ if (ret)
+ goto error;
+
+ /* enable DVB-C demod on IOD[5] */
+ ret = anysee_wr_reg_mask(d, REG_IOD, (1 << 5), 0x20);
+ if (ret)
+ goto error;
+
+ /* enable IF route on IOE[0] */
+ ret = anysee_wr_reg_mask(d, REG_IOE, (1 << 0), 0x01);
+ if (ret)
+ goto error;
+ } else {
+ /* disable DVB-C demod on IOD[5] */
+ ret = anysee_wr_reg_mask(d, REG_IOD, (0 << 5), 0x20);
+ if (ret)
+ goto error;
+
+ /* enable DVB-T demod on IOD[6] */
+ ret = anysee_wr_reg_mask(d, REG_IOD, (1 << 6), 0x40);
+ if (ret)
+ goto error;
+
+ /* enable IF route on IOE[0] */
+ ret = anysee_wr_reg_mask(d, REG_IOE, (0 << 0), 0x01);
+ if (ret)
+ goto error;
+ }
+
+ break;
+ default:
+ ret = 0;
+ }
+
+error:
+ return ret;
+}
+
+static int anysee_add_i2c_dev(struct dvb_usb_device *d, const char *type,
+ u8 addr, void *platform_data)
+{
+ int ret, num;
+ struct anysee_state *state = d_to_priv(d);
+ struct i2c_client *client;
+ struct i2c_adapter *adapter = &d->i2c_adap;
+ struct i2c_board_info board_info = {
+ .addr = addr,
+ .platform_data = platform_data,
+ };
+
+ strlcpy(board_info.type, type, I2C_NAME_SIZE);
+
+ /* find first free client */
+ for (num = 0; num < ANYSEE_I2C_CLIENT_MAX; num++) {
+ if (state->i2c_client[num] == NULL)
+ break;
+ }
+
+ dev_dbg(&d->udev->dev, "%s: num=%d\n", __func__, num);
+
+ if (num == ANYSEE_I2C_CLIENT_MAX) {
+ dev_err(&d->udev->dev, "%s: I2C client out of index\n",
+ KBUILD_MODNAME);
+ ret = -ENODEV;
+ goto err;
+ }
+
+ request_module("%s", board_info.type);
+
+ /* register I2C device */
+ client = i2c_new_device(adapter, &board_info);
+ if (client == NULL || client->dev.driver == NULL) {
+ ret = -ENODEV;
+ goto err;
+ }
+
+ /* increase I2C driver usage count */
+ if (!try_module_get(client->dev.driver->owner)) {
+ i2c_unregister_device(client);
+ ret = -ENODEV;
+ goto err;
+ }
+
+ state->i2c_client[num] = client;
+ return 0;
+err:
+ dev_dbg(&d->udev->dev, "%s: failed=%d\n", __func__, ret);
+ return ret;
+}
+
+static void anysee_del_i2c_dev(struct dvb_usb_device *d)
+{
+ int num;
+ struct anysee_state *state = d_to_priv(d);
+ struct i2c_client *client;
+
+ /* find last used client */
+ num = ANYSEE_I2C_CLIENT_MAX;
+ while (num--) {
+ if (state->i2c_client[num] != NULL)
+ break;
+ }
+
+ dev_dbg(&d->udev->dev, "%s: num=%d\n", __func__, num);
+
+ if (num == -1) {
+ dev_err(&d->udev->dev, "%s: I2C client out of index\n",
+ KBUILD_MODNAME);
+ goto err;
+ }
+
+ client = state->i2c_client[num];
+
+ /* decrease I2C driver usage count */
+ module_put(client->dev.driver->owner);
+
+ /* unregister I2C device */
+ i2c_unregister_device(client);
+
+ state->i2c_client[num] = NULL;
+err:
+ dev_dbg(&d->udev->dev, "%s: failed\n", __func__);
+}
+
+static int anysee_frontend_attach(struct dvb_usb_adapter *adap)
+{
+ struct anysee_state *state = adap_to_priv(adap);
+ struct dvb_usb_device *d = adap_to_d(adap);
+ int ret = 0;
+ u8 tmp;
+ struct i2c_msg msg[2] = {
+ {
+ .addr = 0x60,
+ .flags = 0,
+ .len = 1,
+ .buf = "\x00",
+ }, {
+ .addr = 0x60,
+ .flags = I2C_M_RD,
+ .len = 1,
+ .buf = &tmp,
+ }
+ };
+
+ switch (state->hw) {
+ case ANYSEE_HW_507T: /* 2 */
+ /* E30 */
+
+ /* attach demod */
+ adap->fe[0] = dvb_attach(mt352_attach, &anysee_mt352_config,
+ &d->i2c_adap);
+ if (adap->fe[0])
+ break;
+
+ /* attach demod */
+ adap->fe[0] = dvb_attach(zl10353_attach, &anysee_zl10353_config,
+ &d->i2c_adap);
+
+ break;
+ case ANYSEE_HW_507CD: /* 6 */
+ /* E30 Plus */
+
+ /* enable DVB-T demod on IOD[0] */
+ ret = anysee_wr_reg_mask(d, REG_IOD, (1 << 0), 0x01);
+ if (ret)
+ goto error;
+
+ /* enable transport stream on IOA[7] */
+ ret = anysee_wr_reg_mask(d, REG_IOA, (0 << 7), 0x80);
+ if (ret)
+ goto error;
+
+ /* attach demod */
+ adap->fe[0] = dvb_attach(zl10353_attach, &anysee_zl10353_config,
+ &d->i2c_adap);
+
+ break;
+ case ANYSEE_HW_507DC: /* 10 */
+ /* E30 C Plus */
+
+ /* enable DVB-C demod on IOD[0] */
+ ret = anysee_wr_reg_mask(d, REG_IOD, (1 << 0), 0x01);
+ if (ret)
+ goto error;
+
+ /* attach demod */
+ adap->fe[0] = dvb_attach(tda10023_attach,
+ &anysee_tda10023_config, &d->i2c_adap, 0x48);
+
+ break;
+ case ANYSEE_HW_507SI: /* 11 */
+ /* E30 S2 Plus */
+
+ /* enable DVB-S/S2 demod on IOD[0] */
+ ret = anysee_wr_reg_mask(d, REG_IOD, (1 << 0), 0x01);
+ if (ret)
+ goto error;
+
+ /* attach demod */
+ adap->fe[0] = dvb_attach(cx24116_attach, &anysee_cx24116_config,
+ &d->i2c_adap);
+
+ break;
+ case ANYSEE_HW_507FA: /* 15 */
+ /* E30 Combo Plus */
+ /* E30 C Plus */
+
+ /* enable tuner on IOE[4] */
+ ret = anysee_wr_reg_mask(d, REG_IOE, (1 << 4), 0x10);
+ if (ret)
+ goto error;
+
+ /* probe TDA18212 */
+ tmp = 0;
+ ret = i2c_transfer(&d->i2c_adap, msg, 2);
+ if (ret == 2 && tmp == 0xc7) {
+ dev_dbg(&d->udev->dev, "%s: TDA18212 found\n",
+ __func__);
+ state->has_tda18212 = true;
+ }
+ else
+ tmp = 0;
+
+ /* disable tuner on IOE[4] */
+ ret = anysee_wr_reg_mask(d, REG_IOE, (0 << 4), 0x10);
+ if (ret)
+ goto error;
+
+ /* disable DVB-T demod on IOD[0] */
+ ret = anysee_wr_reg_mask(d, REG_IOD, (0 << 0), 0x01);
+ if (ret)
+ goto error;
+
+ /* enable DVB-C demod on IOD[5] */
+ ret = anysee_wr_reg_mask(d, REG_IOD, (1 << 5), 0x20);
+ if (ret)
+ goto error;
+
+ /* attach demod */
+ if (tmp == 0xc7) {
+ /* TDA18212 config */
+ adap->fe[0] = dvb_attach(tda10023_attach,
+ &anysee_tda10023_tda18212_config,
+ &d->i2c_adap, 0x48);
+
+ /* I2C gate for DNOD44CDH086A(TDA18212) tuner module */
+ if (adap->fe[0])
+ adap->fe[0]->ops.i2c_gate_ctrl =
+ anysee_i2c_gate_ctrl;
+ } else {
+ /* PLL config */
+ adap->fe[0] = dvb_attach(tda10023_attach,
+ &anysee_tda10023_config,
+ &d->i2c_adap, 0x48);
+ }
+
+ /* break out if first frontend attaching fails */
+ if (!adap->fe[0])
+ break;
+
+ /* disable DVB-C demod on IOD[5] */
+ ret = anysee_wr_reg_mask(d, REG_IOD, (0 << 5), 0x20);
+ if (ret)
+ goto error;
+
+ /* enable DVB-T demod on IOD[0] */
+ ret = anysee_wr_reg_mask(d, REG_IOD, (1 << 0), 0x01);
+ if (ret)
+ goto error;
+
+ /* attach demod */
+ if (tmp == 0xc7) {
+ /* TDA18212 config */
+ adap->fe[1] = dvb_attach(zl10353_attach,
+ &anysee_zl10353_tda18212_config2,
+ &d->i2c_adap);
+
+ /* I2C gate for DNOD44CDH086A(TDA18212) tuner module */
+ if (adap->fe[1])
+ adap->fe[1]->ops.i2c_gate_ctrl =
+ anysee_i2c_gate_ctrl;
+ } else {
+ /* PLL config */
+ adap->fe[1] = dvb_attach(zl10353_attach,
+ &anysee_zl10353_config,
+ &d->i2c_adap);
+ }
+
+ break;
+ case ANYSEE_HW_508TC: /* 18 */
+ case ANYSEE_HW_508PTC: /* 21 */
+ /* E7 TC */
+ /* E7 PTC */
+
+ /* disable DVB-T demod on IOD[6] */
+ ret = anysee_wr_reg_mask(d, REG_IOD, (0 << 6), 0x40);
+ if (ret)
+ goto error;
+
+ /* enable DVB-C demod on IOD[5] */
+ ret = anysee_wr_reg_mask(d, REG_IOD, (1 << 5), 0x20);
+ if (ret)
+ goto error;
+
+ /* attach demod */
+ adap->fe[0] = dvb_attach(tda10023_attach,
+ &anysee_tda10023_tda18212_config,
+ &d->i2c_adap, 0x48);
+
+ /* I2C gate for DNOD44CDH086A(TDA18212) tuner module */
+ if (adap->fe[0])
+ adap->fe[0]->ops.i2c_gate_ctrl = anysee_i2c_gate_ctrl;
+
+ /* break out if first frontend attaching fails */
+ if (!adap->fe[0])
+ break;
+
+ /* disable DVB-C demod on IOD[5] */
+ ret = anysee_wr_reg_mask(d, REG_IOD, (0 << 5), 0x20);
+ if (ret)
+ goto error;
+
+ /* enable DVB-T demod on IOD[6] */
+ ret = anysee_wr_reg_mask(d, REG_IOD, (1 << 6), 0x40);
+ if (ret)
+ goto error;
+
+ /* attach demod */
+ adap->fe[1] = dvb_attach(zl10353_attach,
+ &anysee_zl10353_tda18212_config,
+ &d->i2c_adap);
+
+ /* I2C gate for DNOD44CDH086A(TDA18212) tuner module */
+ if (adap->fe[1])
+ adap->fe[1]->ops.i2c_gate_ctrl = anysee_i2c_gate_ctrl;
+
+ state->has_ci = true;
+
+ break;
+ case ANYSEE_HW_508S2: /* 19 */
+ case ANYSEE_HW_508PS2: /* 22 */
+ /* E7 S2 */
+ /* E7 PS2 */
+
+ /* enable DVB-S/S2 demod on IOE[5] */
+ ret = anysee_wr_reg_mask(d, REG_IOE, (1 << 5), 0x20);
+ if (ret)
+ goto error;
+
+ /* attach demod */
+ adap->fe[0] = dvb_attach(stv0900_attach,
+ &anysee_stv0900_config, &d->i2c_adap, 0);
+
+ state->has_ci = true;
+
+ break;
+ case ANYSEE_HW_508T2C: /* 20 */
+ /* E7 T2C */
+
+ /* enable DVB-T/T2/C demod on IOE[5] */
+ ret = anysee_wr_reg_mask(d, REG_IOE, (1 << 5), 0x20);
+ if (ret)
+ goto error;
+
+ /* attach demod */
+ adap->fe[0] = dvb_attach(cxd2820r_attach,
+ &anysee_cxd2820r_config, &d->i2c_adap, NULL);
+
+ state->has_ci = true;
+
+ break;
+ }
+
+ if (!adap->fe[0]) {
+ /* we have no frontend :-( */
+ ret = -ENODEV;
+ dev_err(&d->udev->dev,
+ "%s: Unsupported Anysee version. Please report to <linux-media@vger.kernel.org>.\n",
+ KBUILD_MODNAME);
+ }
+error:
+ return ret;
+}
+
+static int anysee_tuner_attach(struct dvb_usb_adapter *adap)
+{
+ struct anysee_state *state = adap_to_priv(adap);
+ struct dvb_usb_device *d = adap_to_d(adap);
+ struct dvb_frontend *fe;
+ int ret;
+ dev_dbg(&d->udev->dev, "%s:\n", __func__);
+
+ switch (state->hw) {
+ case ANYSEE_HW_507T: /* 2 */
+ /* E30 */
+
+ /* attach tuner */
+ fe = dvb_attach(dvb_pll_attach, adap->fe[0], (0xc2 >> 1), NULL,
+ DVB_PLL_THOMSON_DTT7579);
+
+ break;
+ case ANYSEE_HW_507CD: /* 6 */
+ /* E30 Plus */
+
+ /* attach tuner */
+ fe = dvb_attach(dvb_pll_attach, adap->fe[0], (0xc2 >> 1),
+ &d->i2c_adap, DVB_PLL_THOMSON_DTT7579);
+
+ break;
+ case ANYSEE_HW_507DC: /* 10 */
+ /* E30 C Plus */
+
+ /* attach tuner */
+ fe = dvb_attach(dvb_pll_attach, adap->fe[0], (0xc0 >> 1),
+ &d->i2c_adap, DVB_PLL_SAMSUNG_DTOS403IH102A);
+
+ break;
+ case ANYSEE_HW_507SI: /* 11 */
+ /* E30 S2 Plus */
+
+ /* attach LNB controller */
+ fe = dvb_attach(isl6423_attach, adap->fe[0], &d->i2c_adap,
+ &anysee_isl6423_config);
+
+ break;
+ case ANYSEE_HW_507FA: /* 15 */
+ /* E30 Combo Plus */
+ /* E30 C Plus */
+
+ /* Try first attach TDA18212 silicon tuner on IOE[4], if that
+ * fails attach old simple PLL. */
+
+ /* attach tuner */
+ if (state->has_tda18212) {
+ struct tda18212_config tda18212_config =
+ anysee_tda18212_config;
+
+ tda18212_config.fe = adap->fe[0];
+ ret = anysee_add_i2c_dev(d, "tda18212", 0x60,
+ &tda18212_config);
+ if (ret)
+ goto err;
+
+ /* copy tuner ops for 2nd FE as tuner is shared */
+ if (adap->fe[1]) {
+ adap->fe[1]->tuner_priv =
+ adap->fe[0]->tuner_priv;
+ memcpy(&adap->fe[1]->ops.tuner_ops,
+ &adap->fe[0]->ops.tuner_ops,
+ sizeof(struct dvb_tuner_ops));
+ }
+
+ return 0;
+ } else {
+ /* attach tuner */
+ fe = dvb_attach(dvb_pll_attach, adap->fe[0],
+ (0xc0 >> 1), &d->i2c_adap,
+ DVB_PLL_SAMSUNG_DTOS403IH102A);
+
+ if (fe && adap->fe[1]) {
+ /* attach tuner for 2nd FE */
+ fe = dvb_attach(dvb_pll_attach, adap->fe[1],
+ (0xc0 >> 1), &d->i2c_adap,
+ DVB_PLL_SAMSUNG_DTOS403IH102A);
+ }
+ }
+
+ break;
+ case ANYSEE_HW_508TC: /* 18 */
+ case ANYSEE_HW_508PTC: /* 21 */
+ {
+ /* E7 TC */
+ /* E7 PTC */
+ struct tda18212_config tda18212_config = anysee_tda18212_config;
+
+ tda18212_config.fe = adap->fe[0];
+ ret = anysee_add_i2c_dev(d, "tda18212", 0x60, &tda18212_config);
+ if (ret)
+ goto err;
+
+ /* copy tuner ops for 2nd FE as tuner is shared */
+ if (adap->fe[1]) {
+ adap->fe[1]->tuner_priv = adap->fe[0]->tuner_priv;
+ memcpy(&adap->fe[1]->ops.tuner_ops,
+ &adap->fe[0]->ops.tuner_ops,
+ sizeof(struct dvb_tuner_ops));
+ }
+
+ return 0;
+ }
+ case ANYSEE_HW_508S2: /* 19 */
+ case ANYSEE_HW_508PS2: /* 22 */
+ /* E7 S2 */
+ /* E7 PS2 */
+
+ /* attach tuner */
+ fe = dvb_attach(stv6110_attach, adap->fe[0],
+ &anysee_stv6110_config, &d->i2c_adap);
+
+ if (fe) {
+ /* attach LNB controller */
+ fe = dvb_attach(isl6423_attach, adap->fe[0],
+ &d->i2c_adap, &anysee_isl6423_config);
+ }
+
+ break;
+
+ case ANYSEE_HW_508T2C: /* 20 */
+ {
+ /* E7 T2C */
+ struct tda18212_config tda18212_config =
+ anysee_tda18212_config2;
+
+ tda18212_config.fe = adap->fe[0];
+ ret = anysee_add_i2c_dev(d, "tda18212", 0x60, &tda18212_config);
+ if (ret)
+ goto err;
+
+ return 0;
+ }
+ default:
+ fe = NULL;
+ }
+
+ if (fe)
+ ret = 0;
+ else
+ ret = -ENODEV;
+err:
+ return ret;
+}
+
+#if IS_ENABLED(CONFIG_RC_CORE)
+static int anysee_rc_query(struct dvb_usb_device *d)
+{
+ u8 buf[] = {CMD_GET_IR_CODE};
+ u8 ircode[2];
+ int ret;
+
+ /* Remote controller is basic NEC using address byte 0x08.
+ Anysee device RC query returns only two bytes, status and code,
+ address byte is dropped. Also it does not return any value for
+ NEC RCs having address byte other than 0x08. Due to that, we
+ cannot use that device as standard NEC receiver.
+ It could be possible make hack which reads whole code directly
+ from device memory... */
+
+ ret = anysee_ctrl_msg(d, buf, sizeof(buf), ircode, sizeof(ircode));
+ if (ret)
+ return ret;
+
+ if (ircode[0]) {
+ dev_dbg(&d->udev->dev, "%s: key pressed %02x\n", __func__,
+ ircode[1]);
+ rc_keydown(d->rc_dev, RC_TYPE_NEC,
+ RC_SCANCODE_NEC(0x08, ircode[1]), 0);
+ }
+
+ return 0;
+}
+
+static int anysee_get_rc_config(struct dvb_usb_device *d, struct dvb_usb_rc *rc)
+{
+ rc->allowed_protos = RC_BIT_NEC;
+ rc->query = anysee_rc_query;
+ rc->interval = 250; /* windows driver uses 500ms */
+
+ return 0;
+}
+#else
+ #define anysee_get_rc_config NULL
+#endif
+
+static int anysee_ci_read_attribute_mem(struct dvb_ca_en50221 *ci, int slot,
+ int addr)
+{
+ struct dvb_usb_device *d = ci->data;
+ int ret;
+ u8 buf[] = {CMD_CI, 0x02, 0x40 | addr >> 8, addr & 0xff, 0x00, 1};
+ u8 val;
+
+ ret = anysee_ctrl_msg(d, buf, sizeof(buf), &val, 1);
+ if (ret)
+ return ret;
+
+ return val;
+}
+
+static int anysee_ci_write_attribute_mem(struct dvb_ca_en50221 *ci, int slot,
+ int addr, u8 val)
+{
+ struct dvb_usb_device *d = ci->data;
+ int ret;
+ u8 buf[] = {CMD_CI, 0x03, 0x40 | addr >> 8, addr & 0xff, 0x00, 1, val};
+
+ ret = anysee_ctrl_msg(d, buf, sizeof(buf), NULL, 0);
+ if (ret)
+ return ret;
+
+ return 0;
+}
+
+static int anysee_ci_read_cam_control(struct dvb_ca_en50221 *ci, int slot,
+ u8 addr)
+{
+ struct dvb_usb_device *d = ci->data;
+ int ret;
+ u8 buf[] = {CMD_CI, 0x04, 0x40, addr, 0x00, 1};
+ u8 val;
+
+ ret = anysee_ctrl_msg(d, buf, sizeof(buf), &val, 1);
+ if (ret)
+ return ret;
+
+ return val;
+}
+
+static int anysee_ci_write_cam_control(struct dvb_ca_en50221 *ci, int slot,
+ u8 addr, u8 val)
+{
+ struct dvb_usb_device *d = ci->data;
+ int ret;
+ u8 buf[] = {CMD_CI, 0x05, 0x40, addr, 0x00, 1, val};
+
+ ret = anysee_ctrl_msg(d, buf, sizeof(buf), NULL, 0);
+ if (ret)
+ return ret;
+
+ return 0;
+}
+
+static int anysee_ci_slot_reset(struct dvb_ca_en50221 *ci, int slot)
+{
+ struct dvb_usb_device *d = ci->data;
+ int ret;
+ struct anysee_state *state = d_to_priv(d);
+
+ state->ci_cam_ready = jiffies + msecs_to_jiffies(1000);
+
+ ret = anysee_wr_reg_mask(d, REG_IOA, (0 << 7), 0x80);
+ if (ret)
+ return ret;
+
+ msleep(300);
+
+ ret = anysee_wr_reg_mask(d, REG_IOA, (1 << 7), 0x80);
+ if (ret)
+ return ret;
+
+ return 0;
+}
+
+static int anysee_ci_slot_shutdown(struct dvb_ca_en50221 *ci, int slot)
+{
+ struct dvb_usb_device *d = ci->data;
+ int ret;
+
+ ret = anysee_wr_reg_mask(d, REG_IOA, (0 << 7), 0x80);
+ if (ret)
+ return ret;
+
+ msleep(30);
+
+ ret = anysee_wr_reg_mask(d, REG_IOA, (1 << 7), 0x80);
+ if (ret)
+ return ret;
+
+ return 0;
+}
+
+static int anysee_ci_slot_ts_enable(struct dvb_ca_en50221 *ci, int slot)
+{
+ struct dvb_usb_device *d = ci->data;
+ int ret;
+
+ ret = anysee_wr_reg_mask(d, REG_IOD, (0 << 1), 0x02);
+ if (ret)
+ return ret;
+
+ return 0;
+}
+
+static int anysee_ci_poll_slot_status(struct dvb_ca_en50221 *ci, int slot,
+ int open)
+{
+ struct dvb_usb_device *d = ci->data;
+ struct anysee_state *state = d_to_priv(d);
+ int ret;
+ u8 tmp = 0;
+
+ ret = anysee_rd_reg_mask(d, REG_IOC, &tmp, 0x40);
+ if (ret)
+ return ret;
+
+ if (tmp == 0) {
+ ret = DVB_CA_EN50221_POLL_CAM_PRESENT;
+ if (time_after(jiffies, state->ci_cam_ready))
+ ret |= DVB_CA_EN50221_POLL_CAM_READY;
+ }
+
+ return ret;
+}
+
+static int anysee_ci_init(struct dvb_usb_device *d)
+{
+ struct anysee_state *state = d_to_priv(d);
+ int ret;
+
+ state->ci.owner = THIS_MODULE;
+ state->ci.read_attribute_mem = anysee_ci_read_attribute_mem;
+ state->ci.write_attribute_mem = anysee_ci_write_attribute_mem;
+ state->ci.read_cam_control = anysee_ci_read_cam_control;
+ state->ci.write_cam_control = anysee_ci_write_cam_control;
+ state->ci.slot_reset = anysee_ci_slot_reset;
+ state->ci.slot_shutdown = anysee_ci_slot_shutdown;
+ state->ci.slot_ts_enable = anysee_ci_slot_ts_enable;
+ state->ci.poll_slot_status = anysee_ci_poll_slot_status;
+ state->ci.data = d;
+
+ ret = anysee_wr_reg_mask(d, REG_IOA, (1 << 7), 0x80);
+ if (ret)
+ return ret;
+
+ ret = anysee_wr_reg_mask(d, REG_IOD, (0 << 2)|(0 << 1)|(0 << 0), 0x07);
+ if (ret)
+ return ret;
+
+ ret = anysee_wr_reg_mask(d, REG_IOD, (1 << 2)|(1 << 1)|(1 << 0), 0x07);
+ if (ret)
+ return ret;
+
+ ret = dvb_ca_en50221_init(&d->adapter[0].dvb_adap, &state->ci, 0, 1);
+ if (ret)
+ return ret;
+
+ state->ci_attached = true;
+
+ return 0;
+}
+
+static void anysee_ci_release(struct dvb_usb_device *d)
+{
+ struct anysee_state *state = d_to_priv(d);
+
+ /* detach CI */
+ if (state->ci_attached)
+ dvb_ca_en50221_release(&state->ci);
+
+ return;
+}
+
+static int anysee_init(struct dvb_usb_device *d)
+{
+ struct anysee_state *state = d_to_priv(d);
+ int ret;
+
+ /* There is one interface with two alternate settings.
+ Alternate setting 0 is for bulk transfer.
+ Alternate setting 1 is for isochronous transfer.
+ We use bulk transfer (alternate setting 0). */
+ ret = usb_set_interface(d->udev, 0, 0);
+ if (ret)
+ return ret;
+
+ /* LED light */
+ ret = anysee_led_ctrl(d, 0x01, 0x03);
+ if (ret)
+ return ret;
+
+ /* enable IR */
+ ret = anysee_ir_ctrl(d, 1);
+ if (ret)
+ return ret;
+
+ /* attach CI */
+ if (state->has_ci) {
+ ret = anysee_ci_init(d);
+ if (ret)
+ return ret;
+ }
+
+ return 0;
+}
+
+static void anysee_exit(struct dvb_usb_device *d)
+{
+ struct anysee_state *state = d_to_priv(d);
+
+ if (state->i2c_client[0])
+ anysee_del_i2c_dev(d);
+
+ return anysee_ci_release(d);
+}
+
+/* DVB USB Driver stuff */
+static struct dvb_usb_device_properties anysee_props = {
+ .driver_name = KBUILD_MODNAME,
+ .owner = THIS_MODULE,
+ .adapter_nr = adapter_nr,
+ .size_of_priv = sizeof(struct anysee_state),
+
+ .generic_bulk_ctrl_endpoint = 0x01,
+ .generic_bulk_ctrl_endpoint_response = 0x81,
+
+ .i2c_algo = &anysee_i2c_algo,
+ .read_config = anysee_read_config,
+ .frontend_attach = anysee_frontend_attach,
+ .tuner_attach = anysee_tuner_attach,
+ .init = anysee_init,
+ .get_rc_config = anysee_get_rc_config,
+ .frontend_ctrl = anysee_frontend_ctrl,
+ .streaming_ctrl = anysee_streaming_ctrl,
+ .exit = anysee_exit,
+
+ .num_adapters = 1,
+ .adapter = {
+ {
+ .stream = DVB_USB_STREAM_BULK(0x82, 8, 16 * 512),
+ }
+ }
+};
+
+static const struct usb_device_id anysee_id_table[] = {
+ { DVB_USB_DEVICE(USB_VID_CYPRESS, USB_PID_ANYSEE,
+ &anysee_props, "Anysee", RC_MAP_ANYSEE) },
+ { DVB_USB_DEVICE(USB_VID_AMT, USB_PID_ANYSEE,
+ &anysee_props, "Anysee", RC_MAP_ANYSEE) },
+ { }
+};
+MODULE_DEVICE_TABLE(usb, anysee_id_table);
+
+static struct usb_driver anysee_usb_driver = {
+ .name = KBUILD_MODNAME,
+ .id_table = anysee_id_table,
+ .probe = dvb_usbv2_probe,
+ .disconnect = dvb_usbv2_disconnect,
+ .suspend = dvb_usbv2_suspend,
+ .resume = dvb_usbv2_resume,
+ .reset_resume = dvb_usbv2_reset_resume,
+ .no_dynamic_id = 1,
+ .soft_unbind = 1,
+};
+
+module_usb_driver(anysee_usb_driver);
+
+MODULE_AUTHOR("Antti Palosaari <crope@iki.fi>");
+MODULE_DESCRIPTION("Driver Anysee E30 DVB-C & DVB-T USB2.0");
+MODULE_LICENSE("GPL");
diff --git a/kernel/drivers/media/usb/dvb-usb-v2/anysee.h b/kernel/drivers/media/usb/dvb-usb-v2/anysee.h
new file mode 100644
index 000000000..3ca2bca4e
--- /dev/null
+++ b/kernel/drivers/media/usb/dvb-usb-v2/anysee.h
@@ -0,0 +1,330 @@
+/*
+ * DVB USB Linux driver for Anysee E30 DVB-C & DVB-T USB2.0 receiver
+ *
+ * Copyright (C) 2007 Antti Palosaari <crope@iki.fi>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ * TODO:
+ * - add smart card reader support for Conditional Access (CA)
+ *
+ * Card reader in Anysee is nothing more than ISO 7816 card reader.
+ * There is no hardware CAM in any Anysee device sold.
+ * In my understanding it should be implemented by making own module
+ * for ISO 7816 card reader, like dvb_ca_en50221 is implemented. This
+ * module registers serial interface that can be used to communicate
+ * with any ISO 7816 smart card.
+ *
+ * Any help according to implement serial smart card reader support
+ * is highly welcome!
+ */
+
+#ifndef _DVB_USB_ANYSEE_H_
+#define _DVB_USB_ANYSEE_H_
+
+#define DVB_USB_LOG_PREFIX "anysee"
+#include "dvb_usb.h"
+#include "dvb_ca_en50221.h"
+
+enum cmd {
+ CMD_I2C_READ = 0x33,
+ CMD_I2C_WRITE = 0x31,
+ CMD_REG_READ = 0xb0,
+ CMD_REG_WRITE = 0xb1,
+ CMD_STREAMING_CTRL = 0x12,
+ CMD_LED_AND_IR_CTRL = 0x16,
+ CMD_GET_IR_CODE = 0x41,
+ CMD_GET_HW_INFO = 0x19,
+ CMD_SMARTCARD = 0x34,
+ CMD_CI = 0x37,
+};
+
+struct anysee_state {
+ u8 buf[64];
+ u8 seq;
+ u8 hw; /* PCB ID */
+ #define ANYSEE_I2C_CLIENT_MAX 1
+ struct i2c_client *i2c_client[ANYSEE_I2C_CLIENT_MAX];
+ u8 fe_id:1; /* frondend ID */
+ u8 has_ci:1;
+ u8 has_tda18212:1;
+ u8 ci_attached:1;
+ struct dvb_ca_en50221 ci;
+ unsigned long ci_cam_ready; /* jiffies */
+};
+
+#define ANYSEE_HW_507T 2 /* E30 */
+#define ANYSEE_HW_507CD 6 /* E30 Plus */
+#define ANYSEE_HW_507DC 10 /* E30 C Plus */
+#define ANYSEE_HW_507SI 11 /* E30 S2 Plus */
+#define ANYSEE_HW_507FA 15 /* E30 Combo Plus / E30 C Plus */
+#define ANYSEE_HW_508TC 18 /* E7 TC */
+#define ANYSEE_HW_508S2 19 /* E7 S2 */
+#define ANYSEE_HW_508T2C 20 /* E7 T2C */
+#define ANYSEE_HW_508PTC 21 /* E7 PTC Plus */
+#define ANYSEE_HW_508PS2 22 /* E7 PS2 Plus */
+
+#define REG_IOA 0x80 /* Port A (bit addressable) */
+#define REG_IOB 0x90 /* Port B (bit addressable) */
+#define REG_IOC 0xa0 /* Port C (bit addressable) */
+#define REG_IOD 0xb0 /* Port D (bit addressable) */
+#define REG_IOE 0xb1 /* Port E (NOT bit addressable) */
+#define REG_OEA 0xb2 /* Port A Output Enable */
+#define REG_OEB 0xb3 /* Port B Output Enable */
+#define REG_OEC 0xb4 /* Port C Output Enable */
+#define REG_OED 0xb5 /* Port D Output Enable */
+#define REG_OEE 0xb6 /* Port E Output Enable */
+
+#endif
+
+/***************************************************************************
+ * USB API description (reverse engineered)
+ ***************************************************************************
+
+Transaction flow:
+=================
+BULK[00001] >>> REQUEST PACKET 64 bytes
+BULK[00081] <<< REPLY PACKET #1 64 bytes (PREVIOUS TRANSACTION REPLY)
+BULK[00081] <<< REPLY PACKET #2 64 bytes (CURRENT TRANSACTION REPLY)
+
+General reply packet(s) are always used if not own reply defined.
+
+============================================================================
+| 00-63 | GENERAL REPLY PACKET #1 (PREVIOUS REPLY)
+============================================================================
+| 00 | reply data (if any) from previous transaction
+| | Just same reply packet as returned during previous transaction.
+| | Needed only if reply is missed in previous transaction.
+| | Just skip normally.
+----------------------------------------------------------------------------
+| 01-59 | don't care
+----------------------------------------------------------------------------
+| 60 | packet sequence number
+----------------------------------------------------------------------------
+| 61-63 | don't care
+----------------------------------------------------------------------------
+
+============================================================================
+| 00-63 | GENERAL REPLY PACKET #2 (CURRENT REPLY)
+============================================================================
+| 00 | reply data (if any)
+----------------------------------------------------------------------------
+| 01-59 | don't care
+----------------------------------------------------------------------------
+| 60 | packet sequence number
+----------------------------------------------------------------------------
+| 61-63 | don't care
+----------------------------------------------------------------------------
+
+============================================================================
+| 00-63 | I2C WRITE REQUEST PACKET
+============================================================================
+| 00 | 0x31 I2C write command
+----------------------------------------------------------------------------
+| 01 | i2c address
+----------------------------------------------------------------------------
+| 02 | data length
+| | 0x02 (for typical I2C reg / val pair)
+----------------------------------------------------------------------------
+| 03 | 0x01
+----------------------------------------------------------------------------
+| 04- | data
+----------------------------------------------------------------------------
+| -59 | don't care
+----------------------------------------------------------------------------
+| 60 | packet sequence number
+----------------------------------------------------------------------------
+| 61-63 | don't care
+----------------------------------------------------------------------------
+
+============================================================================
+| 00-63 | I2C READ REQUEST PACKET
+============================================================================
+| 00 | 0x33 I2C read command
+----------------------------------------------------------------------------
+| 01 | i2c address + 1
+----------------------------------------------------------------------------
+| 02 | register
+----------------------------------------------------------------------------
+| 03 | 0x00
+----------------------------------------------------------------------------
+| 04 | 0x00
+----------------------------------------------------------------------------
+| 05 | data length
+----------------------------------------------------------------------------
+| 06-59 | don't care
+----------------------------------------------------------------------------
+| 60 | packet sequence number
+----------------------------------------------------------------------------
+| 61-63 | don't care
+----------------------------------------------------------------------------
+
+============================================================================
+| 00-63 | USB CONTROLLER REGISTER WRITE REQUEST PACKET
+============================================================================
+| 00 | 0xb1 register write command
+----------------------------------------------------------------------------
+| 01-02 | register
+----------------------------------------------------------------------------
+| 03 | 0x01
+----------------------------------------------------------------------------
+| 04 | value
+----------------------------------------------------------------------------
+| 05-59 | don't care
+----------------------------------------------------------------------------
+| 60 | packet sequence number
+----------------------------------------------------------------------------
+| 61-63 | don't care
+----------------------------------------------------------------------------
+
+============================================================================
+| 00-63 | USB CONTROLLER REGISTER READ REQUEST PACKET
+============================================================================
+| 00 | 0xb0 register read command
+----------------------------------------------------------------------------
+| 01-02 | register
+----------------------------------------------------------------------------
+| 03 | 0x01
+----------------------------------------------------------------------------
+| 04-59 | don't care
+----------------------------------------------------------------------------
+| 60 | packet sequence number
+----------------------------------------------------------------------------
+| 61-63 | don't care
+----------------------------------------------------------------------------
+
+============================================================================
+| 00-63 | LED CONTROL REQUEST PACKET
+============================================================================
+| 00 | 0x16 LED and IR control command
+----------------------------------------------------------------------------
+| 01 | 0x01 (LED)
+----------------------------------------------------------------------------
+| 03 | 0x00 blink
+| | 0x01 lights continuously
+----------------------------------------------------------------------------
+| 04 | blink interval
+| | 0x00 fastest (looks like LED lights continuously)
+| | 0xff slowest
+----------------------------------------------------------------------------
+| 05-59 | don't care
+----------------------------------------------------------------------------
+| 60 | packet sequence number
+----------------------------------------------------------------------------
+| 61-63 | don't care
+----------------------------------------------------------------------------
+
+============================================================================
+| 00-63 | IR CONTROL REQUEST PACKET
+============================================================================
+| 00 | 0x16 LED and IR control command
+----------------------------------------------------------------------------
+| 01 | 0x02 (IR)
+----------------------------------------------------------------------------
+| 03 | 0x00 IR disabled
+| | 0x01 IR enabled
+----------------------------------------------------------------------------
+| 04-59 | don't care
+----------------------------------------------------------------------------
+| 60 | packet sequence number
+----------------------------------------------------------------------------
+| 61-63 | don't care
+----------------------------------------------------------------------------
+
+============================================================================
+| 00-63 | STREAMING CONTROL REQUEST PACKET
+============================================================================
+| 00 | 0x12 streaming control command
+----------------------------------------------------------------------------
+| 01 | 0x00 streaming disabled
+| | 0x01 streaming enabled
+----------------------------------------------------------------------------
+| 02 | 0x00
+----------------------------------------------------------------------------
+| 03-59 | don't care
+----------------------------------------------------------------------------
+| 60 | packet sequence number
+----------------------------------------------------------------------------
+| 61-63 | don't care
+----------------------------------------------------------------------------
+
+============================================================================
+| 00-63 | REMOTE CONTROL REQUEST PACKET
+============================================================================
+| 00 | 0x41 remote control command
+----------------------------------------------------------------------------
+| 01-59 | don't care
+----------------------------------------------------------------------------
+| 60 | packet sequence number
+----------------------------------------------------------------------------
+| 61-63 | don't care
+----------------------------------------------------------------------------
+
+============================================================================
+| 00-63 | REMOTE CONTROL REPLY PACKET
+============================================================================
+| 00 | 0x00 code not received
+| | 0x01 code received
+----------------------------------------------------------------------------
+| 01 | remote control code
+----------------------------------------------------------------------------
+| 02-59 | don't care
+----------------------------------------------------------------------------
+| 60 | packet sequence number
+----------------------------------------------------------------------------
+| 61-63 | don't care
+----------------------------------------------------------------------------
+
+============================================================================
+| 00-63 | GET HARDWARE INFO REQUEST PACKET
+============================================================================
+| 00 | 0x19 get hardware info command
+----------------------------------------------------------------------------
+| 01-59 | don't care
+----------------------------------------------------------------------------
+| 60 | packet sequence number
+----------------------------------------------------------------------------
+| 61-63 | don't care
+----------------------------------------------------------------------------
+
+============================================================================
+| 00-63 | GET HARDWARE INFO REPLY PACKET
+============================================================================
+| 00 | hardware id
+----------------------------------------------------------------------------
+| 01-02 | firmware version
+----------------------------------------------------------------------------
+| 03-59 | don't care
+----------------------------------------------------------------------------
+| 60 | packet sequence number
+----------------------------------------------------------------------------
+| 61-63 | don't care
+----------------------------------------------------------------------------
+
+============================================================================
+| 00-63 | SMART CARD READER PACKET
+============================================================================
+| 00 | 0x34 smart card reader command
+----------------------------------------------------------------------------
+| xx |
+----------------------------------------------------------------------------
+| xx-59 | don't care
+----------------------------------------------------------------------------
+| 60 | packet sequence number
+----------------------------------------------------------------------------
+| 61-63 | don't care
+----------------------------------------------------------------------------
+
+*/
diff --git a/kernel/drivers/media/usb/dvb-usb-v2/au6610.c b/kernel/drivers/media/usb/dvb-usb-v2/au6610.c
new file mode 100644
index 000000000..ae6a671b7
--- /dev/null
+++ b/kernel/drivers/media/usb/dvb-usb-v2/au6610.c
@@ -0,0 +1,213 @@
+/*
+ * DVB USB Linux driver for Alcor Micro AU6610 DVB-T USB2.0.
+ *
+ * Copyright (C) 2006 Antti Palosaari <crope@iki.fi>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include "au6610.h"
+#include "zl10353.h"
+#include "qt1010.h"
+
+DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
+
+static int au6610_usb_msg(struct dvb_usb_device *d, u8 operation, u8 addr,
+ u8 *wbuf, u16 wlen, u8 *rbuf, u16 rlen)
+{
+ int ret;
+ u16 index;
+ u8 *usb_buf;
+
+ /*
+ * allocate enough for all known requests,
+ * read returns 5 and write 6 bytes
+ */
+ usb_buf = kmalloc(6, GFP_KERNEL);
+ if (!usb_buf)
+ return -ENOMEM;
+
+ switch (wlen) {
+ case 1:
+ index = wbuf[0] << 8;
+ break;
+ case 2:
+ index = wbuf[0] << 8;
+ index += wbuf[1];
+ break;
+ default:
+ dev_err(&d->udev->dev, "%s: wlen=%d, aborting\n",
+ KBUILD_MODNAME, wlen);
+ ret = -EINVAL;
+ goto error;
+ }
+
+ ret = usb_control_msg(d->udev, usb_rcvctrlpipe(d->udev, 0), operation,
+ USB_TYPE_VENDOR|USB_DIR_IN, addr << 1, index,
+ usb_buf, 6, AU6610_USB_TIMEOUT);
+
+ dvb_usb_dbg_usb_control_msg(d->udev, operation,
+ (USB_TYPE_VENDOR|USB_DIR_IN), addr << 1, index,
+ usb_buf, 6);
+
+ if (ret < 0)
+ goto error;
+
+ switch (operation) {
+ case AU6610_REQ_I2C_READ:
+ case AU6610_REQ_USB_READ:
+ /* requested value is always 5th byte in buffer */
+ rbuf[0] = usb_buf[4];
+ }
+error:
+ kfree(usb_buf);
+ return ret;
+}
+
+static int au6610_i2c_msg(struct dvb_usb_device *d, u8 addr,
+ u8 *wbuf, u16 wlen, u8 *rbuf, u16 rlen)
+{
+ u8 request;
+ u8 wo = (rbuf == NULL || rlen == 0); /* write-only */
+
+ if (wo) {
+ request = AU6610_REQ_I2C_WRITE;
+ } else { /* rw */
+ request = AU6610_REQ_I2C_READ;
+ }
+
+ return au6610_usb_msg(d, request, addr, wbuf, wlen, rbuf, rlen);
+}
+
+
+/* I2C */
+static int au6610_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msg[],
+ int num)
+{
+ struct dvb_usb_device *d = i2c_get_adapdata(adap);
+ int i;
+
+ if (num > 2)
+ return -EINVAL;
+
+ if (mutex_lock_interruptible(&d->i2c_mutex) < 0)
+ return -EAGAIN;
+
+ for (i = 0; i < num; i++) {
+ /* write/read request */
+ if (i+1 < num && (msg[i+1].flags & I2C_M_RD)) {
+ if (au6610_i2c_msg(d, msg[i].addr, msg[i].buf,
+ msg[i].len, msg[i+1].buf,
+ msg[i+1].len) < 0)
+ break;
+ i++;
+ } else if (au6610_i2c_msg(d, msg[i].addr, msg[i].buf,
+ msg[i].len, NULL, 0) < 0)
+ break;
+ }
+
+ mutex_unlock(&d->i2c_mutex);
+ return i;
+}
+
+
+static u32 au6610_i2c_func(struct i2c_adapter *adapter)
+{
+ return I2C_FUNC_I2C;
+}
+
+static struct i2c_algorithm au6610_i2c_algo = {
+ .master_xfer = au6610_i2c_xfer,
+ .functionality = au6610_i2c_func,
+};
+
+/* Callbacks for DVB USB */
+static struct zl10353_config au6610_zl10353_config = {
+ .demod_address = 0x0f,
+ .no_tuner = 1,
+ .parallel_ts = 1,
+};
+
+static int au6610_zl10353_frontend_attach(struct dvb_usb_adapter *adap)
+{
+ adap->fe[0] = dvb_attach(zl10353_attach, &au6610_zl10353_config,
+ &adap_to_d(adap)->i2c_adap);
+ if (adap->fe[0] == NULL)
+ return -ENODEV;
+
+ return 0;
+}
+
+static struct qt1010_config au6610_qt1010_config = {
+ .i2c_address = 0x62
+};
+
+static int au6610_qt1010_tuner_attach(struct dvb_usb_adapter *adap)
+{
+ return dvb_attach(qt1010_attach, adap->fe[0],
+ &adap_to_d(adap)->i2c_adap,
+ &au6610_qt1010_config) == NULL ? -ENODEV : 0;
+}
+
+static int au6610_init(struct dvb_usb_device *d)
+{
+ /* TODO: this functionality belongs likely to the streaming control */
+ /* bInterfaceNumber 0, bAlternateSetting 5 */
+ return usb_set_interface(d->udev, 0, 5);
+}
+
+static struct dvb_usb_device_properties au6610_props = {
+ .driver_name = KBUILD_MODNAME,
+ .owner = THIS_MODULE,
+ .adapter_nr = adapter_nr,
+
+ .i2c_algo = &au6610_i2c_algo,
+ .frontend_attach = au6610_zl10353_frontend_attach,
+ .tuner_attach = au6610_qt1010_tuner_attach,
+ .init = au6610_init,
+
+ .num_adapters = 1,
+ .adapter = {
+ {
+ .stream = DVB_USB_STREAM_ISOC(0x82, 5, 40, 942, 1),
+ },
+ },
+};
+
+static const struct usb_device_id au6610_id_table[] = {
+ { DVB_USB_DEVICE(USB_VID_ALCOR_MICRO, USB_PID_SIGMATEK_DVB_110,
+ &au6610_props, "Sigmatek DVB-110", NULL) },
+ { }
+};
+MODULE_DEVICE_TABLE(usb, au6610_id_table);
+
+static struct usb_driver au6610_driver = {
+ .name = KBUILD_MODNAME,
+ .id_table = au6610_id_table,
+ .probe = dvb_usbv2_probe,
+ .disconnect = dvb_usbv2_disconnect,
+ .suspend = dvb_usbv2_suspend,
+ .resume = dvb_usbv2_resume,
+ .reset_resume = dvb_usbv2_reset_resume,
+ .no_dynamic_id = 1,
+ .soft_unbind = 1,
+};
+
+module_usb_driver(au6610_driver);
+
+MODULE_AUTHOR("Antti Palosaari <crope@iki.fi>");
+MODULE_DESCRIPTION("Driver for Alcor Micro AU6610 DVB-T USB2.0");
+MODULE_VERSION("0.1");
+MODULE_LICENSE("GPL");
diff --git a/kernel/drivers/media/usb/dvb-usb-v2/au6610.h b/kernel/drivers/media/usb/dvb-usb-v2/au6610.h
new file mode 100644
index 000000000..ea337bfc0
--- /dev/null
+++ b/kernel/drivers/media/usb/dvb-usb-v2/au6610.h
@@ -0,0 +1,32 @@
+/*
+ * DVB USB Linux driver for Alcor Micro AU6610 DVB-T USB2.0.
+ *
+ * Copyright (C) 2006 Antti Palosaari <crope@iki.fi>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef AU6610_H
+#define AU6610_H
+#include "dvb_usb.h"
+
+#define AU6610_REQ_I2C_WRITE 0x14
+#define AU6610_REQ_I2C_READ 0x13
+#define AU6610_REQ_USB_WRITE 0x16
+#define AU6610_REQ_USB_READ 0x15
+
+#define AU6610_USB_TIMEOUT 1000
+
+#endif
diff --git a/kernel/drivers/media/usb/dvb-usb-v2/az6007.c b/kernel/drivers/media/usb/dvb-usb-v2/az6007.c
new file mode 100644
index 000000000..935dbaa80
--- /dev/null
+++ b/kernel/drivers/media/usb/dvb-usb-v2/az6007.c
@@ -0,0 +1,985 @@
+/*
+ * Driver for AzureWave 6007 DVB-C/T USB2.0 and clones
+ *
+ * Copyright (c) Henry Wang <Henry.wang@AzureWave.com>
+ *
+ * This driver was made publicly available by Terratec, at:
+ * http://linux.terratec.de/files/TERRATEC_H7/20110323_TERRATEC_H7_Linux.tar.gz
+ * The original driver's license is GPL, as declared with MODULE_LICENSE()
+ *
+ * Copyright (c) 2010-2012 Mauro Carvalho Chehab
+ * Driver modified by in order to work with upstream drxk driver, and
+ * tons of bugs got fixed, and converted to use dvb-usb-v2.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation under version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include "drxk.h"
+#include "mt2063.h"
+#include "dvb_ca_en50221.h"
+#include "dvb_usb.h"
+#include "cypress_firmware.h"
+
+#define AZ6007_FIRMWARE "dvb-usb-terratec-h7-az6007.fw"
+
+static int az6007_xfer_debug;
+module_param_named(xfer_debug, az6007_xfer_debug, int, 0644);
+MODULE_PARM_DESC(xfer_debug, "Enable xfer debug");
+
+DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
+
+/* Known requests (Cypress FX2 firmware + az6007 "private" ones*/
+
+#define FX2_OED 0xb5
+#define AZ6007_READ_DATA 0xb7
+#define AZ6007_I2C_RD 0xb9
+#define AZ6007_POWER 0xbc
+#define AZ6007_I2C_WR 0xbd
+#define FX2_SCON1 0xc0
+#define AZ6007_TS_THROUGH 0xc7
+#define AZ6007_READ_IR 0xb4
+
+struct az6007_device_state {
+ struct mutex mutex;
+ struct mutex ca_mutex;
+ struct dvb_ca_en50221 ca;
+ unsigned warm:1;
+ int (*gate_ctrl) (struct dvb_frontend *, int);
+ unsigned char data[4096];
+};
+
+static struct drxk_config terratec_h7_drxk = {
+ .adr = 0x29,
+ .parallel_ts = true,
+ .dynamic_clk = true,
+ .single_master = true,
+ .enable_merr_cfg = true,
+ .no_i2c_bridge = false,
+ .chunk_size = 64,
+ .mpeg_out_clk_strength = 0x02,
+ .qam_demod_parameter_count = 2,
+ .microcode_name = "dvb-usb-terratec-h7-drxk.fw",
+};
+
+static struct drxk_config cablestar_hdci_drxk = {
+ .adr = 0x29,
+ .parallel_ts = true,
+ .dynamic_clk = true,
+ .single_master = true,
+ .enable_merr_cfg = true,
+ .no_i2c_bridge = false,
+ .chunk_size = 64,
+ .mpeg_out_clk_strength = 0x02,
+ .qam_demod_parameter_count = 2,
+ .microcode_name = "dvb-usb-technisat-cablestar-hdci-drxk.fw",
+};
+
+static int drxk_gate_ctrl(struct dvb_frontend *fe, int enable)
+{
+ struct az6007_device_state *st = fe_to_priv(fe);
+ struct dvb_usb_adapter *adap = fe->sec_priv;
+ int status = 0;
+
+ pr_debug("%s: %s\n", __func__, enable ? "enable" : "disable");
+
+ if (!adap || !st)
+ return -EINVAL;
+
+ if (enable)
+ status = st->gate_ctrl(fe, 1);
+ else
+ status = st->gate_ctrl(fe, 0);
+
+ return status;
+}
+
+static struct mt2063_config az6007_mt2063_config = {
+ .tuner_address = 0x60,
+ .refclock = 36125000,
+};
+
+static int __az6007_read(struct usb_device *udev, u8 req, u16 value,
+ u16 index, u8 *b, int blen)
+{
+ int ret;
+
+ ret = usb_control_msg(udev,
+ usb_rcvctrlpipe(udev, 0),
+ req,
+ USB_TYPE_VENDOR | USB_DIR_IN,
+ value, index, b, blen, 5000);
+ if (ret < 0) {
+ pr_warn("usb read operation failed. (%d)\n", ret);
+ return -EIO;
+ }
+
+ if (az6007_xfer_debug) {
+ printk(KERN_DEBUG "az6007: IN req: %02x, value: %04x, index: %04x\n",
+ req, value, index);
+ print_hex_dump_bytes("az6007: payload: ",
+ DUMP_PREFIX_NONE, b, blen);
+ }
+
+ return ret;
+}
+
+static int az6007_read(struct dvb_usb_device *d, u8 req, u16 value,
+ u16 index, u8 *b, int blen)
+{
+ struct az6007_device_state *st = d->priv;
+ int ret;
+
+ if (mutex_lock_interruptible(&st->mutex) < 0)
+ return -EAGAIN;
+
+ ret = __az6007_read(d->udev, req, value, index, b, blen);
+
+ mutex_unlock(&st->mutex);
+
+ return ret;
+}
+
+static int __az6007_write(struct usb_device *udev, u8 req, u16 value,
+ u16 index, u8 *b, int blen)
+{
+ int ret;
+
+ if (az6007_xfer_debug) {
+ printk(KERN_DEBUG "az6007: OUT req: %02x, value: %04x, index: %04x\n",
+ req, value, index);
+ print_hex_dump_bytes("az6007: payload: ",
+ DUMP_PREFIX_NONE, b, blen);
+ }
+
+ if (blen > 64) {
+ pr_err("az6007: tried to write %d bytes, but I2C max size is 64 bytes\n",
+ blen);
+ return -EOPNOTSUPP;
+ }
+
+ ret = usb_control_msg(udev,
+ usb_sndctrlpipe(udev, 0),
+ req,
+ USB_TYPE_VENDOR | USB_DIR_OUT,
+ value, index, b, blen, 5000);
+ if (ret != blen) {
+ pr_err("usb write operation failed. (%d)\n", ret);
+ return -EIO;
+ }
+
+ return 0;
+}
+
+static int az6007_write(struct dvb_usb_device *d, u8 req, u16 value,
+ u16 index, u8 *b, int blen)
+{
+ struct az6007_device_state *st = d->priv;
+ int ret;
+
+ if (mutex_lock_interruptible(&st->mutex) < 0)
+ return -EAGAIN;
+
+ ret = __az6007_write(d->udev, req, value, index, b, blen);
+
+ mutex_unlock(&st->mutex);
+
+ return ret;
+}
+
+static int az6007_streaming_ctrl(struct dvb_frontend *fe, int onoff)
+{
+ struct dvb_usb_device *d = fe_to_d(fe);
+
+ pr_debug("%s: %s\n", __func__, onoff ? "enable" : "disable");
+
+ return az6007_write(d, 0xbc, onoff, 0, NULL, 0);
+}
+
+#if IS_ENABLED(CONFIG_RC_CORE)
+/* remote control stuff (does not work with my box) */
+static int az6007_rc_query(struct dvb_usb_device *d)
+{
+ struct az6007_device_state *st = d_to_priv(d);
+ unsigned code;
+
+ az6007_read(d, AZ6007_READ_IR, 0, 0, st->data, 10);
+
+ if (st->data[1] == 0x44)
+ return 0;
+
+ if ((st->data[3] ^ st->data[4]) == 0xff) {
+ if ((st->data[1] ^ st->data[2]) == 0xff)
+ code = RC_SCANCODE_NEC(st->data[1], st->data[3]);
+ else
+ code = RC_SCANCODE_NECX(st->data[1] << 8 | st->data[2],
+ st->data[3]);
+ } else {
+ code = RC_SCANCODE_NEC32(st->data[1] << 24 |
+ st->data[2] << 16 |
+ st->data[3] << 8 |
+ st->data[4]);
+ }
+
+ rc_keydown(d->rc_dev, RC_TYPE_NEC, code, st->data[5]);
+
+ return 0;
+}
+
+static int az6007_get_rc_config(struct dvb_usb_device *d, struct dvb_usb_rc *rc)
+{
+ pr_debug("Getting az6007 Remote Control properties\n");
+
+ rc->allowed_protos = RC_BIT_NEC;
+ rc->query = az6007_rc_query;
+ rc->interval = 400;
+
+ return 0;
+}
+#else
+ #define az6007_get_rc_config NULL
+#endif
+
+static int az6007_ci_read_attribute_mem(struct dvb_ca_en50221 *ca,
+ int slot,
+ int address)
+{
+ struct dvb_usb_device *d = (struct dvb_usb_device *)ca->data;
+ struct az6007_device_state *state = d_to_priv(d);
+
+ int ret;
+ u8 req;
+ u16 value;
+ u16 index;
+ int blen;
+ u8 *b;
+
+ if (slot != 0)
+ return -EINVAL;
+
+ b = kmalloc(12, GFP_KERNEL);
+ if (!b)
+ return -ENOMEM;
+
+ mutex_lock(&state->ca_mutex);
+
+ req = 0xC1;
+ value = address;
+ index = 0;
+ blen = 1;
+
+ ret = az6007_read(d, req, value, index, b, blen);
+ if (ret < 0) {
+ pr_warn("usb in operation failed. (%d)\n", ret);
+ ret = -EINVAL;
+ } else {
+ ret = b[0];
+ }
+
+ mutex_unlock(&state->ca_mutex);
+ kfree(b);
+ return ret;
+}
+
+static int az6007_ci_write_attribute_mem(struct dvb_ca_en50221 *ca,
+ int slot,
+ int address,
+ u8 value)
+{
+ struct dvb_usb_device *d = (struct dvb_usb_device *)ca->data;
+ struct az6007_device_state *state = d_to_priv(d);
+
+ int ret;
+ u8 req;
+ u16 value1;
+ u16 index;
+ int blen;
+
+ pr_debug("%s(), slot %d\n", __func__, slot);
+ if (slot != 0)
+ return -EINVAL;
+
+ mutex_lock(&state->ca_mutex);
+ req = 0xC2;
+ value1 = address;
+ index = value;
+ blen = 0;
+
+ ret = az6007_write(d, req, value1, index, NULL, blen);
+ if (ret != 0)
+ pr_warn("usb out operation failed. (%d)\n", ret);
+
+ mutex_unlock(&state->ca_mutex);
+ return ret;
+}
+
+static int az6007_ci_read_cam_control(struct dvb_ca_en50221 *ca,
+ int slot,
+ u8 address)
+{
+ struct dvb_usb_device *d = (struct dvb_usb_device *)ca->data;
+ struct az6007_device_state *state = d_to_priv(d);
+
+ int ret;
+ u8 req;
+ u16 value;
+ u16 index;
+ int blen;
+ u8 *b;
+
+ if (slot != 0)
+ return -EINVAL;
+
+ b = kmalloc(12, GFP_KERNEL);
+ if (!b)
+ return -ENOMEM;
+
+ mutex_lock(&state->ca_mutex);
+
+ req = 0xC3;
+ value = address;
+ index = 0;
+ blen = 2;
+
+ ret = az6007_read(d, req, value, index, b, blen);
+ if (ret < 0) {
+ pr_warn("usb in operation failed. (%d)\n", ret);
+ ret = -EINVAL;
+ } else {
+ if (b[0] == 0)
+ pr_warn("Read CI IO error\n");
+
+ ret = b[1];
+ pr_debug("read cam data = %x from 0x%x\n", b[1], value);
+ }
+
+ mutex_unlock(&state->ca_mutex);
+ kfree(b);
+ return ret;
+}
+
+static int az6007_ci_write_cam_control(struct dvb_ca_en50221 *ca,
+ int slot,
+ u8 address,
+ u8 value)
+{
+ struct dvb_usb_device *d = (struct dvb_usb_device *)ca->data;
+ struct az6007_device_state *state = d_to_priv(d);
+
+ int ret;
+ u8 req;
+ u16 value1;
+ u16 index;
+ int blen;
+
+ if (slot != 0)
+ return -EINVAL;
+
+ mutex_lock(&state->ca_mutex);
+ req = 0xC4;
+ value1 = address;
+ index = value;
+ blen = 0;
+
+ ret = az6007_write(d, req, value1, index, NULL, blen);
+ if (ret != 0) {
+ pr_warn("usb out operation failed. (%d)\n", ret);
+ goto failed;
+ }
+
+failed:
+ mutex_unlock(&state->ca_mutex);
+ return ret;
+}
+
+static int CI_CamReady(struct dvb_ca_en50221 *ca, int slot)
+{
+ struct dvb_usb_device *d = (struct dvb_usb_device *)ca->data;
+
+ int ret;
+ u8 req;
+ u16 value;
+ u16 index;
+ int blen;
+ u8 *b;
+
+ b = kmalloc(12, GFP_KERNEL);
+ if (!b)
+ return -ENOMEM;
+
+ req = 0xC8;
+ value = 0;
+ index = 0;
+ blen = 1;
+
+ ret = az6007_read(d, req, value, index, b, blen);
+ if (ret < 0) {
+ pr_warn("usb in operation failed. (%d)\n", ret);
+ ret = -EIO;
+ } else{
+ ret = b[0];
+ }
+ kfree(b);
+ return ret;
+}
+
+static int az6007_ci_slot_reset(struct dvb_ca_en50221 *ca, int slot)
+{
+ struct dvb_usb_device *d = (struct dvb_usb_device *)ca->data;
+ struct az6007_device_state *state = d_to_priv(d);
+
+ int ret, i;
+ u8 req;
+ u16 value;
+ u16 index;
+ int blen;
+
+ mutex_lock(&state->ca_mutex);
+
+ req = 0xC6;
+ value = 1;
+ index = 0;
+ blen = 0;
+
+ ret = az6007_write(d, req, value, index, NULL, blen);
+ if (ret != 0) {
+ pr_warn("usb out operation failed. (%d)\n", ret);
+ goto failed;
+ }
+
+ msleep(500);
+ req = 0xC6;
+ value = 0;
+ index = 0;
+ blen = 0;
+
+ ret = az6007_write(d, req, value, index, NULL, blen);
+ if (ret != 0) {
+ pr_warn("usb out operation failed. (%d)\n", ret);
+ goto failed;
+ }
+
+ for (i = 0; i < 15; i++) {
+ msleep(100);
+
+ if (CI_CamReady(ca, slot)) {
+ pr_debug("CAM Ready\n");
+ break;
+ }
+ }
+ msleep(5000);
+
+failed:
+ mutex_unlock(&state->ca_mutex);
+ return ret;
+}
+
+static int az6007_ci_slot_shutdown(struct dvb_ca_en50221 *ca, int slot)
+{
+ return 0;
+}
+
+static int az6007_ci_slot_ts_enable(struct dvb_ca_en50221 *ca, int slot)
+{
+ struct dvb_usb_device *d = (struct dvb_usb_device *)ca->data;
+ struct az6007_device_state *state = d_to_priv(d);
+
+ int ret;
+ u8 req;
+ u16 value;
+ u16 index;
+ int blen;
+
+ pr_debug("%s()\n", __func__);
+ mutex_lock(&state->ca_mutex);
+ req = 0xC7;
+ value = 1;
+ index = 0;
+ blen = 0;
+
+ ret = az6007_write(d, req, value, index, NULL, blen);
+ if (ret != 0) {
+ pr_warn("usb out operation failed. (%d)\n", ret);
+ goto failed;
+ }
+
+failed:
+ mutex_unlock(&state->ca_mutex);
+ return ret;
+}
+
+static int az6007_ci_poll_slot_status(struct dvb_ca_en50221 *ca, int slot, int open)
+{
+ struct dvb_usb_device *d = (struct dvb_usb_device *)ca->data;
+ struct az6007_device_state *state = d_to_priv(d);
+ int ret;
+ u8 req;
+ u16 value;
+ u16 index;
+ int blen;
+ u8 *b;
+
+ b = kmalloc(12, GFP_KERNEL);
+ if (!b)
+ return -ENOMEM;
+ mutex_lock(&state->ca_mutex);
+
+ req = 0xC5;
+ value = 0;
+ index = 0;
+ blen = 1;
+
+ ret = az6007_read(d, req, value, index, b, blen);
+ if (ret < 0) {
+ pr_warn("usb in operation failed. (%d)\n", ret);
+ ret = -EIO;
+ } else
+ ret = 0;
+
+ if (!ret && b[0] == 1) {
+ ret = DVB_CA_EN50221_POLL_CAM_PRESENT |
+ DVB_CA_EN50221_POLL_CAM_READY;
+ }
+
+ mutex_unlock(&state->ca_mutex);
+ kfree(b);
+ return ret;
+}
+
+
+static void az6007_ci_uninit(struct dvb_usb_device *d)
+{
+ struct az6007_device_state *state;
+
+ pr_debug("%s()\n", __func__);
+
+ if (NULL == d)
+ return;
+
+ state = d_to_priv(d);
+ if (NULL == state)
+ return;
+
+ if (NULL == state->ca.data)
+ return;
+
+ dvb_ca_en50221_release(&state->ca);
+
+ memset(&state->ca, 0, sizeof(state->ca));
+}
+
+
+static int az6007_ci_init(struct dvb_usb_adapter *adap)
+{
+ struct dvb_usb_device *d = adap_to_d(adap);
+ struct az6007_device_state *state = adap_to_priv(adap);
+ int ret;
+
+ pr_debug("%s()\n", __func__);
+
+ mutex_init(&state->ca_mutex);
+ state->ca.owner = THIS_MODULE;
+ state->ca.read_attribute_mem = az6007_ci_read_attribute_mem;
+ state->ca.write_attribute_mem = az6007_ci_write_attribute_mem;
+ state->ca.read_cam_control = az6007_ci_read_cam_control;
+ state->ca.write_cam_control = az6007_ci_write_cam_control;
+ state->ca.slot_reset = az6007_ci_slot_reset;
+ state->ca.slot_shutdown = az6007_ci_slot_shutdown;
+ state->ca.slot_ts_enable = az6007_ci_slot_ts_enable;
+ state->ca.poll_slot_status = az6007_ci_poll_slot_status;
+ state->ca.data = d;
+
+ ret = dvb_ca_en50221_init(&adap->dvb_adap,
+ &state->ca,
+ 0, /* flags */
+ 1);/* n_slots */
+ if (ret != 0) {
+ pr_err("Cannot initialize CI: Error %d.\n", ret);
+ memset(&state->ca, 0, sizeof(state->ca));
+ return ret;
+ }
+
+ pr_debug("CI initialized.\n");
+
+ return 0;
+}
+
+static int az6007_read_mac_addr(struct dvb_usb_adapter *adap, u8 mac[6])
+{
+ struct dvb_usb_device *d = adap_to_d(adap);
+ struct az6007_device_state *st = adap_to_priv(adap);
+ int ret;
+
+ ret = az6007_read(d, AZ6007_READ_DATA, 6, 0, st->data, 6);
+ memcpy(mac, st->data, 6);
+
+ if (ret > 0)
+ pr_debug("%s: mac is %pM\n", __func__, mac);
+
+ return ret;
+}
+
+static int az6007_frontend_attach(struct dvb_usb_adapter *adap)
+{
+ struct az6007_device_state *st = adap_to_priv(adap);
+ struct dvb_usb_device *d = adap_to_d(adap);
+
+ pr_debug("attaching demod drxk\n");
+
+ adap->fe[0] = dvb_attach(drxk_attach, &terratec_h7_drxk,
+ &d->i2c_adap);
+ if (!adap->fe[0])
+ return -EINVAL;
+
+ adap->fe[0]->sec_priv = adap;
+ st->gate_ctrl = adap->fe[0]->ops.i2c_gate_ctrl;
+ adap->fe[0]->ops.i2c_gate_ctrl = drxk_gate_ctrl;
+
+ az6007_ci_init(adap);
+
+ return 0;
+}
+
+static int az6007_cablestar_hdci_frontend_attach(struct dvb_usb_adapter *adap)
+{
+ struct az6007_device_state *st = adap_to_priv(adap);
+ struct dvb_usb_device *d = adap_to_d(adap);
+
+ pr_debug("attaching demod drxk\n");
+
+ adap->fe[0] = dvb_attach(drxk_attach, &cablestar_hdci_drxk,
+ &d->i2c_adap);
+ if (!adap->fe[0])
+ return -EINVAL;
+
+ adap->fe[0]->sec_priv = adap;
+ st->gate_ctrl = adap->fe[0]->ops.i2c_gate_ctrl;
+ adap->fe[0]->ops.i2c_gate_ctrl = drxk_gate_ctrl;
+
+ az6007_ci_init(adap);
+
+ return 0;
+}
+
+static int az6007_tuner_attach(struct dvb_usb_adapter *adap)
+{
+ struct dvb_usb_device *d = adap_to_d(adap);
+
+ pr_debug("attaching tuner mt2063\n");
+
+ /* Attach mt2063 to DVB-C frontend */
+ if (adap->fe[0]->ops.i2c_gate_ctrl)
+ adap->fe[0]->ops.i2c_gate_ctrl(adap->fe[0], 1);
+ if (!dvb_attach(mt2063_attach, adap->fe[0],
+ &az6007_mt2063_config,
+ &d->i2c_adap))
+ return -EINVAL;
+
+ if (adap->fe[0]->ops.i2c_gate_ctrl)
+ adap->fe[0]->ops.i2c_gate_ctrl(adap->fe[0], 0);
+
+ return 0;
+}
+
+static int az6007_power_ctrl(struct dvb_usb_device *d, int onoff)
+{
+ struct az6007_device_state *state = d_to_priv(d);
+ int ret;
+
+ pr_debug("%s()\n", __func__);
+
+ if (!state->warm) {
+ mutex_init(&state->mutex);
+
+ ret = az6007_write(d, AZ6007_POWER, 0, 2, NULL, 0);
+ if (ret < 0)
+ return ret;
+ msleep(60);
+ ret = az6007_write(d, AZ6007_POWER, 1, 4, NULL, 0);
+ if (ret < 0)
+ return ret;
+ msleep(100);
+ ret = az6007_write(d, AZ6007_POWER, 1, 3, NULL, 0);
+ if (ret < 0)
+ return ret;
+ msleep(20);
+ ret = az6007_write(d, AZ6007_POWER, 1, 4, NULL, 0);
+ if (ret < 0)
+ return ret;
+
+ msleep(400);
+ ret = az6007_write(d, FX2_SCON1, 0, 3, NULL, 0);
+ if (ret < 0)
+ return ret;
+ msleep(150);
+ ret = az6007_write(d, FX2_SCON1, 1, 3, NULL, 0);
+ if (ret < 0)
+ return ret;
+ msleep(430);
+ ret = az6007_write(d, AZ6007_POWER, 0, 0, NULL, 0);
+ if (ret < 0)
+ return ret;
+
+ state->warm = true;
+
+ return 0;
+ }
+
+ if (!onoff)
+ return 0;
+
+ az6007_write(d, AZ6007_POWER, 0, 0, NULL, 0);
+ az6007_write(d, AZ6007_TS_THROUGH, 0, 0, NULL, 0);
+
+ return 0;
+}
+
+/* I2C */
+static int az6007_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[],
+ int num)
+{
+ struct dvb_usb_device *d = i2c_get_adapdata(adap);
+ struct az6007_device_state *st = d_to_priv(d);
+ int i, j, len;
+ int ret = 0;
+ u16 index;
+ u16 value;
+ int length;
+ u8 req, addr;
+
+ if (mutex_lock_interruptible(&st->mutex) < 0)
+ return -EAGAIN;
+
+ for (i = 0; i < num; i++) {
+ addr = msgs[i].addr << 1;
+ if (((i + 1) < num)
+ && (msgs[i].len == 1)
+ && ((msgs[i].flags & I2C_M_RD) != I2C_M_RD)
+ && (msgs[i + 1].flags & I2C_M_RD)
+ && (msgs[i].addr == msgs[i + 1].addr)) {
+ /*
+ * A write + read xfer for the same address, where
+ * the first xfer has just 1 byte length.
+ * Need to join both into one operation
+ */
+ if (az6007_xfer_debug)
+ printk(KERN_DEBUG "az6007: I2C W/R addr=0x%x len=%d/%d\n",
+ addr, msgs[i].len, msgs[i + 1].len);
+ req = AZ6007_I2C_RD;
+ index = msgs[i].buf[0];
+ value = addr | (1 << 8);
+ length = 6 + msgs[i + 1].len;
+ len = msgs[i + 1].len;
+ ret = __az6007_read(d->udev, req, value, index,
+ st->data, length);
+ if (ret >= len) {
+ for (j = 0; j < len; j++)
+ msgs[i + 1].buf[j] = st->data[j + 5];
+ } else
+ ret = -EIO;
+ i++;
+ } else if (!(msgs[i].flags & I2C_M_RD)) {
+ /* write bytes */
+ if (az6007_xfer_debug)
+ printk(KERN_DEBUG "az6007: I2C W addr=0x%x len=%d\n",
+ addr, msgs[i].len);
+ req = AZ6007_I2C_WR;
+ index = msgs[i].buf[0];
+ value = addr | (1 << 8);
+ length = msgs[i].len - 1;
+ len = msgs[i].len - 1;
+ for (j = 0; j < len; j++)
+ st->data[j] = msgs[i].buf[j + 1];
+ ret = __az6007_write(d->udev, req, value, index,
+ st->data, length);
+ } else {
+ /* read bytes */
+ if (az6007_xfer_debug)
+ printk(KERN_DEBUG "az6007: I2C R addr=0x%x len=%d\n",
+ addr, msgs[i].len);
+ req = AZ6007_I2C_RD;
+ index = msgs[i].buf[0];
+ value = addr;
+ length = msgs[i].len + 6;
+ len = msgs[i].len;
+ ret = __az6007_read(d->udev, req, value, index,
+ st->data, length);
+ for (j = 0; j < len; j++)
+ msgs[i].buf[j] = st->data[j + 5];
+ }
+ if (ret < 0)
+ goto err;
+ }
+err:
+ mutex_unlock(&st->mutex);
+
+ if (ret < 0) {
+ pr_info("%s ERROR: %i\n", __func__, ret);
+ return ret;
+ }
+ return num;
+}
+
+static u32 az6007_i2c_func(struct i2c_adapter *adapter)
+{
+ return I2C_FUNC_I2C;
+}
+
+static struct i2c_algorithm az6007_i2c_algo = {
+ .master_xfer = az6007_i2c_xfer,
+ .functionality = az6007_i2c_func,
+};
+
+static int az6007_identify_state(struct dvb_usb_device *d, const char **name)
+{
+ int ret;
+ u8 *mac;
+
+ pr_debug("Identifying az6007 state\n");
+
+ mac = kmalloc(6, GFP_ATOMIC);
+ if (!mac)
+ return -ENOMEM;
+
+ /* Try to read the mac address */
+ ret = __az6007_read(d->udev, AZ6007_READ_DATA, 6, 0, mac, 6);
+ if (ret == 6)
+ ret = WARM;
+ else
+ ret = COLD;
+
+ kfree(mac);
+
+ if (ret == COLD) {
+ __az6007_write(d->udev, 0x09, 1, 0, NULL, 0);
+ __az6007_write(d->udev, 0x00, 0, 0, NULL, 0);
+ __az6007_write(d->udev, 0x00, 0, 0, NULL, 0);
+ }
+
+ pr_debug("Device is on %s state\n",
+ ret == WARM ? "warm" : "cold");
+ return ret;
+}
+
+static void az6007_usb_disconnect(struct usb_interface *intf)
+{
+ struct dvb_usb_device *d = usb_get_intfdata(intf);
+ az6007_ci_uninit(d);
+ dvb_usbv2_disconnect(intf);
+}
+
+static int az6007_download_firmware(struct dvb_usb_device *d,
+ const struct firmware *fw)
+{
+ pr_debug("Loading az6007 firmware\n");
+
+ return cypress_load_firmware(d->udev, fw, CYPRESS_FX2);
+}
+
+/* DVB USB Driver stuff */
+static struct dvb_usb_device_properties az6007_props = {
+ .driver_name = KBUILD_MODNAME,
+ .owner = THIS_MODULE,
+ .firmware = AZ6007_FIRMWARE,
+
+ .adapter_nr = adapter_nr,
+ .size_of_priv = sizeof(struct az6007_device_state),
+ .i2c_algo = &az6007_i2c_algo,
+ .tuner_attach = az6007_tuner_attach,
+ .frontend_attach = az6007_frontend_attach,
+ .streaming_ctrl = az6007_streaming_ctrl,
+ .get_rc_config = az6007_get_rc_config,
+ .read_mac_address = az6007_read_mac_addr,
+ .download_firmware = az6007_download_firmware,
+ .identify_state = az6007_identify_state,
+ .power_ctrl = az6007_power_ctrl,
+ .num_adapters = 1,
+ .adapter = {
+ { .stream = DVB_USB_STREAM_BULK(0x02, 10, 4096), }
+ }
+};
+
+static struct dvb_usb_device_properties az6007_cablestar_hdci_props = {
+ .driver_name = KBUILD_MODNAME,
+ .owner = THIS_MODULE,
+ .firmware = AZ6007_FIRMWARE,
+
+ .adapter_nr = adapter_nr,
+ .size_of_priv = sizeof(struct az6007_device_state),
+ .i2c_algo = &az6007_i2c_algo,
+ .tuner_attach = az6007_tuner_attach,
+ .frontend_attach = az6007_cablestar_hdci_frontend_attach,
+ .streaming_ctrl = az6007_streaming_ctrl,
+/* ditch get_rc_config as it can't work (TS35 remote, I believe it's rc5) */
+ .get_rc_config = NULL,
+ .read_mac_address = az6007_read_mac_addr,
+ .download_firmware = az6007_download_firmware,
+ .identify_state = az6007_identify_state,
+ .power_ctrl = az6007_power_ctrl,
+ .num_adapters = 1,
+ .adapter = {
+ { .stream = DVB_USB_STREAM_BULK(0x02, 10, 4096), }
+ }
+};
+
+static struct usb_device_id az6007_usb_table[] = {
+ {DVB_USB_DEVICE(USB_VID_AZUREWAVE, USB_PID_AZUREWAVE_6007,
+ &az6007_props, "Azurewave 6007", RC_MAP_EMPTY)},
+ {DVB_USB_DEVICE(USB_VID_TERRATEC, USB_PID_TERRATEC_H7,
+ &az6007_props, "Terratec H7", RC_MAP_NEC_TERRATEC_CINERGY_XS)},
+ {DVB_USB_DEVICE(USB_VID_TERRATEC, USB_PID_TERRATEC_H7_2,
+ &az6007_props, "Terratec H7", RC_MAP_NEC_TERRATEC_CINERGY_XS)},
+ {DVB_USB_DEVICE(USB_VID_TECHNISAT, USB_PID_TECHNISAT_USB2_CABLESTAR_HDCI,
+ &az6007_cablestar_hdci_props, "Technisat CableStar Combo HD CI", RC_MAP_EMPTY)},
+ {0},
+};
+
+MODULE_DEVICE_TABLE(usb, az6007_usb_table);
+
+static int az6007_suspend(struct usb_interface *intf, pm_message_t msg)
+{
+ struct dvb_usb_device *d = usb_get_intfdata(intf);
+
+ az6007_ci_uninit(d);
+ return dvb_usbv2_suspend(intf, msg);
+}
+
+static int az6007_resume(struct usb_interface *intf)
+{
+ struct dvb_usb_device *d = usb_get_intfdata(intf);
+ struct dvb_usb_adapter *adap = &d->adapter[0];
+
+ az6007_ci_init(adap);
+ return dvb_usbv2_resume(intf);
+}
+
+/* usb specific object needed to register this driver with the usb subsystem */
+static struct usb_driver az6007_usb_driver = {
+ .name = KBUILD_MODNAME,
+ .id_table = az6007_usb_table,
+ .probe = dvb_usbv2_probe,
+ .disconnect = az6007_usb_disconnect,
+ .no_dynamic_id = 1,
+ .soft_unbind = 1,
+ /*
+ * FIXME: need to implement reset_resume, likely with
+ * dvb-usb-v2 core support
+ */
+ .suspend = az6007_suspend,
+ .resume = az6007_resume,
+};
+
+module_usb_driver(az6007_usb_driver);
+
+MODULE_AUTHOR("Henry Wang <Henry.wang@AzureWave.com>");
+MODULE_AUTHOR("Mauro Carvalho Chehab");
+MODULE_DESCRIPTION("Driver for AzureWave 6007 DVB-C/T USB2.0 and clones");
+MODULE_VERSION("2.0");
+MODULE_LICENSE("GPL");
+MODULE_FIRMWARE(AZ6007_FIRMWARE);
diff --git a/kernel/drivers/media/usb/dvb-usb-v2/ce6230.c b/kernel/drivers/media/usb/dvb-usb-v2/ce6230.c
new file mode 100644
index 000000000..f67b14bc3
--- /dev/null
+++ b/kernel/drivers/media/usb/dvb-usb-v2/ce6230.c
@@ -0,0 +1,292 @@
+/*
+ * Intel CE6230 DVB USB driver
+ *
+ * Copyright (C) 2009 Antti Palosaari <crope@iki.fi>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+
+#include "ce6230.h"
+
+DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
+
+static int ce6230_ctrl_msg(struct dvb_usb_device *d, struct usb_req *req)
+{
+ int ret;
+ unsigned int pipe;
+ u8 request;
+ u8 requesttype;
+ u16 value;
+ u16 index;
+ u8 *buf;
+
+ request = req->cmd;
+ value = req->value;
+ index = req->index;
+
+ switch (req->cmd) {
+ case I2C_READ:
+ case DEMOD_READ:
+ case REG_READ:
+ requesttype = (USB_TYPE_VENDOR | USB_DIR_IN);
+ break;
+ case I2C_WRITE:
+ case DEMOD_WRITE:
+ case REG_WRITE:
+ requesttype = (USB_TYPE_VENDOR | USB_DIR_OUT);
+ break;
+ default:
+ dev_err(&d->udev->dev, "%s: unknown command=%02x\n",
+ KBUILD_MODNAME, req->cmd);
+ ret = -EINVAL;
+ goto error;
+ }
+
+ buf = kmalloc(req->data_len, GFP_KERNEL);
+ if (!buf) {
+ ret = -ENOMEM;
+ goto error;
+ }
+
+ if (requesttype == (USB_TYPE_VENDOR | USB_DIR_OUT)) {
+ /* write */
+ memcpy(buf, req->data, req->data_len);
+ pipe = usb_sndctrlpipe(d->udev, 0);
+ } else {
+ /* read */
+ pipe = usb_rcvctrlpipe(d->udev, 0);
+ }
+
+ msleep(1); /* avoid I2C errors */
+
+ ret = usb_control_msg(d->udev, pipe, request, requesttype, value, index,
+ buf, req->data_len, CE6230_USB_TIMEOUT);
+
+ dvb_usb_dbg_usb_control_msg(d->udev, request, requesttype, value, index,
+ buf, req->data_len);
+
+ if (ret < 0)
+ dev_err(&d->udev->dev, "%s: usb_control_msg() failed=%d\n",
+ KBUILD_MODNAME, ret);
+ else
+ ret = 0;
+
+ /* read request, copy returned data to return buf */
+ if (!ret && requesttype == (USB_TYPE_VENDOR | USB_DIR_IN))
+ memcpy(req->data, buf, req->data_len);
+
+ kfree(buf);
+error:
+ return ret;
+}
+
+/* I2C */
+static struct zl10353_config ce6230_zl10353_config;
+
+static int ce6230_i2c_master_xfer(struct i2c_adapter *adap,
+ struct i2c_msg msg[], int num)
+{
+ struct dvb_usb_device *d = i2c_get_adapdata(adap);
+ int ret = 0, i = 0;
+ struct usb_req req;
+
+ if (num > 2)
+ return -EOPNOTSUPP;
+
+ memset(&req, 0, sizeof(req));
+
+ if (mutex_lock_interruptible(&d->i2c_mutex) < 0)
+ return -EAGAIN;
+
+ while (i < num) {
+ if (num > i + 1 && (msg[i+1].flags & I2C_M_RD)) {
+ if (msg[i].addr ==
+ ce6230_zl10353_config.demod_address) {
+ req.cmd = DEMOD_READ;
+ req.value = msg[i].addr >> 1;
+ req.index = msg[i].buf[0];
+ req.data_len = msg[i+1].len;
+ req.data = &msg[i+1].buf[0];
+ ret = ce6230_ctrl_msg(d, &req);
+ } else {
+ dev_err(&d->udev->dev, "%s: I2C read not " \
+ "implemented\n",
+ KBUILD_MODNAME);
+ ret = -EOPNOTSUPP;
+ }
+ i += 2;
+ } else {
+ if (msg[i].addr ==
+ ce6230_zl10353_config.demod_address) {
+ req.cmd = DEMOD_WRITE;
+ req.value = msg[i].addr >> 1;
+ req.index = msg[i].buf[0];
+ req.data_len = msg[i].len-1;
+ req.data = &msg[i].buf[1];
+ ret = ce6230_ctrl_msg(d, &req);
+ } else {
+ req.cmd = I2C_WRITE;
+ req.value = 0x2000 + (msg[i].addr >> 1);
+ req.index = 0x0000;
+ req.data_len = msg[i].len;
+ req.data = &msg[i].buf[0];
+ ret = ce6230_ctrl_msg(d, &req);
+ }
+ i += 1;
+ }
+ if (ret)
+ break;
+ }
+
+ mutex_unlock(&d->i2c_mutex);
+ return ret ? ret : i;
+}
+
+static u32 ce6230_i2c_functionality(struct i2c_adapter *adapter)
+{
+ return I2C_FUNC_I2C;
+}
+
+static struct i2c_algorithm ce6230_i2c_algorithm = {
+ .master_xfer = ce6230_i2c_master_xfer,
+ .functionality = ce6230_i2c_functionality,
+};
+
+/* Callbacks for DVB USB */
+static struct zl10353_config ce6230_zl10353_config = {
+ .demod_address = 0x1e,
+ .adc_clock = 450000,
+ .if2 = 45700,
+ .no_tuner = 1,
+ .parallel_ts = 1,
+ .clock_ctl_1 = 0x34,
+ .pll_0 = 0x0e,
+};
+
+static int ce6230_zl10353_frontend_attach(struct dvb_usb_adapter *adap)
+{
+ struct dvb_usb_device *d = adap_to_d(adap);
+
+ dev_dbg(&d->udev->dev, "%s:\n", __func__);
+
+ adap->fe[0] = dvb_attach(zl10353_attach, &ce6230_zl10353_config,
+ &d->i2c_adap);
+ if (adap->fe[0] == NULL)
+ return -ENODEV;
+
+ return 0;
+}
+
+static struct mxl5005s_config ce6230_mxl5003s_config = {
+ .i2c_address = 0xc6,
+ .if_freq = IF_FREQ_4570000HZ,
+ .xtal_freq = CRYSTAL_FREQ_16000000HZ,
+ .agc_mode = MXL_SINGLE_AGC,
+ .tracking_filter = MXL_TF_DEFAULT,
+ .rssi_enable = MXL_RSSI_ENABLE,
+ .cap_select = MXL_CAP_SEL_ENABLE,
+ .div_out = MXL_DIV_OUT_4,
+ .clock_out = MXL_CLOCK_OUT_DISABLE,
+ .output_load = MXL5005S_IF_OUTPUT_LOAD_200_OHM,
+ .top = MXL5005S_TOP_25P2,
+ .mod_mode = MXL_DIGITAL_MODE,
+ .if_mode = MXL_ZERO_IF,
+ .AgcMasterByte = 0x00,
+};
+
+static int ce6230_mxl5003s_tuner_attach(struct dvb_usb_adapter *adap)
+{
+ struct dvb_usb_device *d = adap_to_d(adap);
+ int ret;
+
+ dev_dbg(&d->udev->dev, "%s:\n", __func__);
+
+ ret = dvb_attach(mxl5005s_attach, adap->fe[0], &d->i2c_adap,
+ &ce6230_mxl5003s_config) == NULL ? -ENODEV : 0;
+ return ret;
+}
+
+static int ce6230_power_ctrl(struct dvb_usb_device *d, int onoff)
+{
+ int ret;
+
+ dev_dbg(&d->udev->dev, "%s: onoff=%d\n", __func__, onoff);
+
+ /* InterfaceNumber 1 / AlternateSetting 0 idle
+ InterfaceNumber 1 / AlternateSetting 1 streaming */
+ ret = usb_set_interface(d->udev, 1, onoff);
+ if (ret)
+ dev_err(&d->udev->dev, "%s: usb_set_interface() failed=%d\n",
+ KBUILD_MODNAME, ret);
+
+ return ret;
+}
+
+/* DVB USB Driver stuff */
+static struct dvb_usb_device_properties ce6230_props = {
+ .driver_name = KBUILD_MODNAME,
+ .owner = THIS_MODULE,
+ .adapter_nr = adapter_nr,
+ .bInterfaceNumber = 1,
+
+ .i2c_algo = &ce6230_i2c_algorithm,
+ .power_ctrl = ce6230_power_ctrl,
+ .frontend_attach = ce6230_zl10353_frontend_attach,
+ .tuner_attach = ce6230_mxl5003s_tuner_attach,
+
+ .num_adapters = 1,
+ .adapter = {
+ {
+ .stream = {
+ .type = USB_BULK,
+ .count = 6,
+ .endpoint = 0x82,
+ .u = {
+ .bulk = {
+ .buffersize = (16 * 512),
+ }
+ }
+ },
+ }
+ },
+};
+
+static const struct usb_device_id ce6230_id_table[] = {
+ { DVB_USB_DEVICE(USB_VID_INTEL, USB_PID_INTEL_CE9500,
+ &ce6230_props, "Intel CE9500 reference design", NULL) },
+ { DVB_USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_A310,
+ &ce6230_props, "AVerMedia A310 USB 2.0 DVB-T tuner", NULL) },
+ { }
+};
+MODULE_DEVICE_TABLE(usb, ce6230_id_table);
+
+static struct usb_driver ce6230_usb_driver = {
+ .name = KBUILD_MODNAME,
+ .id_table = ce6230_id_table,
+ .probe = dvb_usbv2_probe,
+ .disconnect = dvb_usbv2_disconnect,
+ .suspend = dvb_usbv2_suspend,
+ .resume = dvb_usbv2_resume,
+ .reset_resume = dvb_usbv2_reset_resume,
+ .no_dynamic_id = 1,
+ .soft_unbind = 1,
+};
+
+module_usb_driver(ce6230_usb_driver);
+
+MODULE_AUTHOR("Antti Palosaari <crope@iki.fi>");
+MODULE_DESCRIPTION("Intel CE6230 driver");
+MODULE_LICENSE("GPL");
diff --git a/kernel/drivers/media/usb/dvb-usb-v2/ce6230.h b/kernel/drivers/media/usb/dvb-usb-v2/ce6230.h
new file mode 100644
index 000000000..299e57e33
--- /dev/null
+++ b/kernel/drivers/media/usb/dvb-usb-v2/ce6230.h
@@ -0,0 +1,50 @@
+/*
+ * Intel CE6230 DVB USB driver
+ *
+ * Copyright (C) 2009 Antti Palosaari <crope@iki.fi>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+
+#ifndef CE6230_H
+#define CE6230_H
+
+#include "dvb_usb.h"
+#include "zl10353.h"
+#include "mxl5005s.h"
+
+#define CE6230_USB_TIMEOUT 1000
+
+struct usb_req {
+ u8 cmd; /* [1] */
+ u16 value; /* [2|3] */
+ u16 index; /* [4|5] */
+ u16 data_len; /* [6|7] */
+ u8 *data;
+};
+
+enum ce6230_cmd {
+ CONFIG_READ = 0xd0, /* rd 0 (unclear) */
+ UNKNOWN_WRITE = 0xc7, /* wr 7 (unclear) */
+ I2C_READ = 0xd9, /* rd 9 (unclear) */
+ I2C_WRITE = 0xca, /* wr a */
+ DEMOD_READ = 0xdb, /* rd b */
+ DEMOD_WRITE = 0xcc, /* wr c */
+ REG_READ = 0xde, /* rd e */
+ REG_WRITE = 0xcf, /* wr f */
+};
+
+#endif
diff --git a/kernel/drivers/media/usb/dvb-usb-v2/dvb_usb.h b/kernel/drivers/media/usb/dvb-usb-v2/dvb_usb.h
new file mode 100644
index 000000000..023d91f7e
--- /dev/null
+++ b/kernel/drivers/media/usb/dvb-usb-v2/dvb_usb.h
@@ -0,0 +1,412 @@
+/*
+ * DVB USB framework
+ *
+ * Copyright (C) 2004-6 Patrick Boettcher <patrick.boettcher@desy.de>
+ * Copyright (C) 2012 Antti Palosaari <crope@iki.fi>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+
+#ifndef DVB_USB_H
+#define DVB_USB_H
+
+#include <linux/usb/input.h>
+#include <linux/firmware.h>
+#include <media/rc-core.h>
+#include <media/media-device.h>
+
+#include "dvb_frontend.h"
+#include "dvb_demux.h"
+#include "dvb_net.h"
+#include "dmxdev.h"
+#include "dvb-usb-ids.h"
+
+/*
+ * device file: /dev/dvb/adapter[0-1]/frontend[0-2]
+ *
+ * |-- device
+ * | |-- adapter0
+ * | | |-- frontend0
+ * | | |-- frontend1
+ * | | `-- frontend2
+ * | `-- adapter1
+ * | |-- frontend0
+ * | |-- frontend1
+ * | `-- frontend2
+ *
+ *
+ * Commonly used variable names:
+ * d = pointer to device (struct dvb_usb_device *)
+ * adap = pointer to adapter (struct dvb_usb_adapter *)
+ * fe = pointer to frontend (struct dvb_frontend *)
+ *
+ * Use macros defined in that file to resolve needed pointers.
+ */
+
+/* helper macros for every DVB USB driver use */
+#define adap_to_d(adap) (container_of(adap, struct dvb_usb_device, \
+ adapter[adap->id]))
+#define adap_to_priv(adap) (adap_to_d(adap)->priv)
+#define fe_to_adap(fe) ((struct dvb_usb_adapter *) ((fe)->dvb->priv))
+#define fe_to_d(fe) (adap_to_d(fe_to_adap(fe)))
+#define fe_to_priv(fe) (fe_to_d(fe)->priv)
+#define d_to_priv(d) (d->priv)
+
+#define dvb_usb_dbg_usb_control_msg(udev, r, t, v, i, b, l) { \
+ char *direction; \
+ if (t == (USB_TYPE_VENDOR | USB_DIR_OUT)) \
+ direction = ">>>"; \
+ else \
+ direction = "<<<"; \
+ dev_dbg(&udev->dev, "%s: %02x %02x %02x %02x %02x %02x %02x %02x " \
+ "%s %*ph\n", __func__, t, r, v & 0xff, v >> 8, \
+ i & 0xff, i >> 8, l & 0xff, l >> 8, direction, l, b); \
+}
+
+#define DVB_USB_STREAM_BULK(endpoint_, count_, size_) { \
+ .type = USB_BULK, \
+ .count = count_, \
+ .endpoint = endpoint_, \
+ .u = { \
+ .bulk = { \
+ .buffersize = size_, \
+ } \
+ } \
+}
+
+#define DVB_USB_STREAM_ISOC(endpoint_, count_, frames_, size_, interval_) { \
+ .type = USB_ISOC, \
+ .count = count_, \
+ .endpoint = endpoint_, \
+ .u = { \
+ .isoc = { \
+ .framesperurb = frames_, \
+ .framesize = size_,\
+ .interval = interval_, \
+ } \
+ } \
+}
+
+#define DVB_USB_DEVICE(vend, prod, props_, name_, rc) \
+ .match_flags = USB_DEVICE_ID_MATCH_DEVICE, \
+ .idVendor = (vend), \
+ .idProduct = (prod), \
+ .driver_info = (kernel_ulong_t) &((const struct dvb_usb_driver_info) { \
+ .props = (props_), \
+ .name = (name_), \
+ .rc_map = (rc), \
+ })
+
+struct dvb_usb_device;
+struct dvb_usb_adapter;
+
+/**
+ * structure for carrying all needed data from the device driver to the general
+ * dvb usb routines
+ * @name: device name
+ * @rc_map: name of rc codes table
+ * @props: structure containing all device properties
+ */
+struct dvb_usb_driver_info {
+ const char *name;
+ const char *rc_map;
+ const struct dvb_usb_device_properties *props;
+};
+
+/**
+ * structure for remote controller configuration
+ * @map_name: name of rc codes table
+ * @allowed_protos: protocol(s) supported by the driver
+ * @change_protocol: callback to change protocol
+ * @query: called to query an event from the device
+ * @interval: time in ms between two queries
+ * @driver_type: used to point if a device supports raw mode
+ * @bulk_mode: device supports bulk mode for rc (disable polling mode)
+ */
+struct dvb_usb_rc {
+ const char *map_name;
+ u64 allowed_protos;
+ int (*change_protocol)(struct rc_dev *dev, u64 *rc_type);
+ int (*query) (struct dvb_usb_device *d);
+ unsigned int interval;
+ enum rc_driver_type driver_type;
+ bool bulk_mode;
+};
+
+/**
+ * usb streaming configration for adapter
+ * @type: urb type
+ * @count: count of used urbs
+ * @endpoint: stream usb endpoint number
+ */
+struct usb_data_stream_properties {
+#define USB_BULK 1
+#define USB_ISOC 2
+ u8 type;
+ u8 count;
+ u8 endpoint;
+
+ union {
+ struct {
+ unsigned int buffersize; /* per URB */
+ } bulk;
+ struct {
+ int framesperurb;
+ int framesize;
+ int interval;
+ } isoc;
+ } u;
+};
+
+/**
+ * properties of dvb usb device adapter
+ * @caps: adapter capabilities
+ * @pid_filter_count: pid count of adapter pid-filter
+ * @pid_filter_ctrl: called to enable/disable pid-filter
+ * @pid_filter: called to set/unset pid for filtering
+ * @stream: adapter usb stream configuration
+ */
+#define MAX_NO_OF_FE_PER_ADAP 3
+struct dvb_usb_adapter_properties {
+#define DVB_USB_ADAP_HAS_PID_FILTER 0x01
+#define DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF 0x02
+#define DVB_USB_ADAP_NEED_PID_FILTERING 0x04
+ u8 caps;
+
+ u8 pid_filter_count;
+ int (*pid_filter_ctrl) (struct dvb_usb_adapter *, int);
+ int (*pid_filter) (struct dvb_usb_adapter *, int, u16, int);
+
+ struct usb_data_stream_properties stream;
+};
+
+/**
+ * struct dvb_usb_device_properties - properties of a dvb-usb-device
+ * @driver_name: name of the owning driver module
+ * @owner: owner of the dvb_adapter
+ * @adapter_nr: values from the DVB_DEFINE_MOD_OPT_ADAPTER_NR() macro
+ * @bInterfaceNumber: usb interface number driver binds
+ * @size_of_priv: bytes allocated for the driver private data
+ * @generic_bulk_ctrl_endpoint: bulk control endpoint number for sent
+ * @generic_bulk_ctrl_endpoint_response: bulk control endpoint number for
+ * receive
+ * @generic_bulk_ctrl_delay: delay between bulk control sent and receive message
+ * @identify_state: called to determine the firmware state (cold or warm) and
+ * return possible firmware file name to be loaded
+ * @firmware: name of the firmware file to be loaded
+ * @download_firmware: called to download the firmware
+ * @i2c_algo: i2c_algorithm if the device has i2c-adapter
+ * @num_adapters: dvb usb device adapter count
+ * @get_adapter_count: called to resolve adapter count
+ * @adapter: array of all adapter properties of device
+ * @power_ctrl: called to enable/disable power of the device
+ * @read_config: called to resolve device configuration
+ * @read_mac_address: called to resolve adapter mac-address
+ * @frontend_attach: called to attach the possible frontends
+ * @frontend_detach: called to detach the possible frontends
+ * @tuner_attach: called to attach the possible tuners
+ * @frontend_ctrl: called to power on/off active frontend
+ * @streaming_ctrl: called to start/stop the usb streaming of adapter
+ * @init: called after adapters are created in order to finalize device
+ * configuration
+ * @exit: called when driver is unloaded
+ * @get_rc_config: called to resolve used remote controller configuration
+ * @get_stream_config: called to resolve input and output stream configuration
+ * of the adapter just before streaming is started. input stream is transport
+ * stream from the demodulator and output stream is usb stream to host.
+ */
+#define MAX_NO_OF_ADAPTER_PER_DEVICE 2
+struct dvb_usb_device_properties {
+ const char *driver_name;
+ struct module *owner;
+ short *adapter_nr;
+
+ u8 bInterfaceNumber;
+ unsigned int size_of_priv;
+ u8 generic_bulk_ctrl_endpoint;
+ u8 generic_bulk_ctrl_endpoint_response;
+ unsigned int generic_bulk_ctrl_delay;
+
+#define WARM 0
+#define COLD 1
+ int (*identify_state) (struct dvb_usb_device *, const char **);
+ const char *firmware;
+#define RECONNECTS_USB 1
+ int (*download_firmware) (struct dvb_usb_device *,
+ const struct firmware *);
+
+ struct i2c_algorithm *i2c_algo;
+
+ unsigned int num_adapters;
+ int (*get_adapter_count) (struct dvb_usb_device *);
+ struct dvb_usb_adapter_properties adapter[MAX_NO_OF_ADAPTER_PER_DEVICE];
+ int (*power_ctrl) (struct dvb_usb_device *, int);
+ int (*read_config) (struct dvb_usb_device *d);
+ int (*read_mac_address) (struct dvb_usb_adapter *, u8 []);
+ int (*frontend_attach) (struct dvb_usb_adapter *);
+ int (*frontend_detach)(struct dvb_usb_adapter *);
+ int (*tuner_attach) (struct dvb_usb_adapter *);
+ int (*tuner_detach)(struct dvb_usb_adapter *);
+ int (*frontend_ctrl) (struct dvb_frontend *, int);
+ int (*streaming_ctrl) (struct dvb_frontend *, int);
+ int (*init) (struct dvb_usb_device *);
+ void (*exit) (struct dvb_usb_device *);
+ int (*get_rc_config) (struct dvb_usb_device *, struct dvb_usb_rc *);
+#define DVB_USB_FE_TS_TYPE_188 0
+#define DVB_USB_FE_TS_TYPE_204 1
+#define DVB_USB_FE_TS_TYPE_RAW 2
+ int (*get_stream_config) (struct dvb_frontend *, u8 *,
+ struct usb_data_stream_properties *);
+};
+
+/**
+ * generic object of an usb stream
+ * @buf_num: number of buffer allocated
+ * @buf_size: size of each buffer in buf_list
+ * @buf_list: array containing all allocate buffers for streaming
+ * @dma_addr: list of dma_addr_t for each buffer in buf_list
+ *
+ * @urbs_initialized: number of URBs initialized
+ * @urbs_submitted: number of URBs submitted
+ */
+#define MAX_NO_URBS_FOR_DATA_STREAM 10
+struct usb_data_stream {
+ struct usb_device *udev;
+ struct usb_data_stream_properties props;
+
+#define USB_STATE_INIT 0x00
+#define USB_STATE_URB_BUF 0x01
+ u8 state;
+
+ void (*complete) (struct usb_data_stream *, u8 *, size_t);
+
+ struct urb *urb_list[MAX_NO_URBS_FOR_DATA_STREAM];
+ int buf_num;
+ unsigned long buf_size;
+ u8 *buf_list[MAX_NO_URBS_FOR_DATA_STREAM];
+ dma_addr_t dma_addr[MAX_NO_URBS_FOR_DATA_STREAM];
+
+ int urbs_initialized;
+ int urbs_submitted;
+
+ void *user_priv;
+};
+
+/**
+ * dvb adapter object on dvb usb device
+ * @props: pointer to adapter properties
+ * @stream: adapter the usb data stream
+ * @id: index of this adapter (starting with 0)
+ * @ts_type: transport stream, input stream, type
+ * @suspend_resume_active: set when there is ongoing suspend / resume
+ * @pid_filtering: is hardware pid_filtering used or not
+ * @feed_count: current feed count
+ * @max_feed_count: maimum feed count device can handle
+ * @dvb_adap: adapter dvb_adapter
+ * @dmxdev: adapter dmxdev
+ * @demux: adapter software demuxer
+ * @dvb_net: adapter dvb_net interfaces
+ * @sync_mutex: mutex used to sync control and streaming of the adapter
+ * @fe: adapter frontends
+ * @fe_init: rerouted frontend-init function
+ * @fe_sleep: rerouted frontend-sleep function
+ */
+struct dvb_usb_adapter {
+ const struct dvb_usb_adapter_properties *props;
+ struct usb_data_stream stream;
+ u8 id;
+ u8 ts_type;
+ bool suspend_resume_active;
+ bool pid_filtering;
+ u8 feed_count;
+ u8 max_feed_count;
+ s8 active_fe;
+#define ADAP_INIT 0
+#define ADAP_SLEEP 1
+#define ADAP_STREAMING 2
+ unsigned long state_bits;
+
+ /* dvb */
+ struct dvb_adapter dvb_adap;
+ struct dmxdev dmxdev;
+ struct dvb_demux demux;
+ struct dvb_net dvb_net;
+
+ struct dvb_frontend *fe[MAX_NO_OF_FE_PER_ADAP];
+ int (*fe_init[MAX_NO_OF_FE_PER_ADAP]) (struct dvb_frontend *);
+ int (*fe_sleep[MAX_NO_OF_FE_PER_ADAP]) (struct dvb_frontend *);
+};
+
+/**
+ * dvb usb device object
+ * @props: device properties
+ * @name: device name
+ * @rc_map: name of rc codes table
+ * @rc_polling_active: set when RC polling is active
+ * @intf: pointer to the device's struct usb_interface
+ * @udev: pointer to the device's struct usb_device
+ * @rc: remote controller configuration
+ * @powered: indicated whether the device is power or not
+ * @usb_mutex: mutex for usb control messages
+ * @i2c_mutex: mutex for i2c-transfers
+ * @i2c_adap: device's i2c-adapter
+ * @rc_dev: rc device for the remote control
+ * @rc_query_work: work for polling remote
+ * @priv: private data of the actual driver (allocate by dvb usb, size defined
+ * in size_of_priv of dvb_usb_properties).
+ */
+struct dvb_usb_device {
+ const struct dvb_usb_device_properties *props;
+ const char *name;
+ const char *rc_map;
+ bool rc_polling_active;
+ struct usb_interface *intf;
+ struct usb_device *udev;
+ struct dvb_usb_rc rc;
+ int powered;
+
+ /* locking */
+ struct mutex usb_mutex;
+
+ /* i2c */
+ struct mutex i2c_mutex;
+ struct i2c_adapter i2c_adap;
+
+ struct dvb_usb_adapter adapter[MAX_NO_OF_ADAPTER_PER_DEVICE];
+
+ /* remote control */
+ struct rc_dev *rc_dev;
+ char rc_phys[64];
+ struct delayed_work rc_query_work;
+
+ void *priv;
+};
+
+extern int dvb_usbv2_probe(struct usb_interface *,
+ const struct usb_device_id *);
+extern void dvb_usbv2_disconnect(struct usb_interface *);
+extern int dvb_usbv2_suspend(struct usb_interface *, pm_message_t);
+extern int dvb_usbv2_resume(struct usb_interface *);
+extern int dvb_usbv2_reset_resume(struct usb_interface *);
+
+/* the generic read/write method for device control */
+extern int dvb_usbv2_generic_rw(struct dvb_usb_device *, u8 *, u16, u8 *, u16);
+extern int dvb_usbv2_generic_write(struct dvb_usb_device *, u8 *, u16);
+/* caller must hold lock when locked versions are called */
+extern int dvb_usbv2_generic_rw_locked(struct dvb_usb_device *,
+ u8 *, u16, u8 *, u16);
+extern int dvb_usbv2_generic_write_locked(struct dvb_usb_device *, u8 *, u16);
+
+#endif
diff --git a/kernel/drivers/media/usb/dvb-usb-v2/dvb_usb_common.h b/kernel/drivers/media/usb/dvb-usb-v2/dvb_usb_common.h
new file mode 100644
index 000000000..45f07090d
--- /dev/null
+++ b/kernel/drivers/media/usb/dvb-usb-v2/dvb_usb_common.h
@@ -0,0 +1,35 @@
+/*
+ * DVB USB framework
+ *
+ * Copyright (C) 2004-6 Patrick Boettcher <patrick.boettcher@desy.de>
+ * Copyright (C) 2012 Antti Palosaari <crope@iki.fi>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+
+#ifndef DVB_USB_COMMON_H
+#define DVB_USB_COMMON_H
+
+#include "dvb_usb.h"
+
+/* commonly used methods */
+extern int usb_urb_initv2(struct usb_data_stream *stream,
+ const struct usb_data_stream_properties *props);
+extern int usb_urb_exitv2(struct usb_data_stream *stream);
+extern int usb_urb_submitv2(struct usb_data_stream *stream,
+ struct usb_data_stream_properties *props);
+extern int usb_urb_killv2(struct usb_data_stream *stream);
+
+#endif
diff --git a/kernel/drivers/media/usb/dvb-usb-v2/dvb_usb_core.c b/kernel/drivers/media/usb/dvb-usb-v2/dvb_usb_core.c
new file mode 100644
index 000000000..f5df9eaba
--- /dev/null
+++ b/kernel/drivers/media/usb/dvb-usb-v2/dvb_usb_core.c
@@ -0,0 +1,1123 @@
+/*
+ * DVB USB framework
+ *
+ * Copyright (C) 2004-6 Patrick Boettcher <patrick.boettcher@desy.de>
+ * Copyright (C) 2012 Antti Palosaari <crope@iki.fi>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+
+#include "dvb_usb_common.h"
+
+static int dvb_usbv2_disable_rc_polling;
+module_param_named(disable_rc_polling, dvb_usbv2_disable_rc_polling, int, 0644);
+MODULE_PARM_DESC(disable_rc_polling,
+ "disable remote control polling (default: 0)");
+static int dvb_usb_force_pid_filter_usage;
+module_param_named(force_pid_filter_usage, dvb_usb_force_pid_filter_usage,
+ int, 0444);
+MODULE_PARM_DESC(force_pid_filter_usage,
+ "force all DVB USB devices to use a PID filter, if any (default: 0)");
+
+static int dvb_usbv2_download_firmware(struct dvb_usb_device *d,
+ const char *name)
+{
+ int ret;
+ const struct firmware *fw;
+ dev_dbg(&d->udev->dev, "%s:\n", __func__);
+
+ if (!d->props->download_firmware) {
+ ret = -EINVAL;
+ goto err;
+ }
+
+ ret = request_firmware(&fw, name, &d->udev->dev);
+ if (ret < 0) {
+ dev_err(&d->udev->dev,
+ "%s: Did not find the firmware file '%s'. Please see linux/Documentation/dvb/ for more details on firmware-problems. Status %d\n",
+ KBUILD_MODNAME, name, ret);
+ goto err;
+ }
+
+ dev_info(&d->udev->dev, "%s: downloading firmware from file '%s'\n",
+ KBUILD_MODNAME, name);
+
+ ret = d->props->download_firmware(d, fw);
+ release_firmware(fw);
+ if (ret < 0)
+ goto err;
+
+ return ret;
+err:
+ dev_dbg(&d->udev->dev, "%s: failed=%d\n", __func__, ret);
+ return ret;
+}
+
+static int dvb_usbv2_i2c_init(struct dvb_usb_device *d)
+{
+ int ret;
+ dev_dbg(&d->udev->dev, "%s:\n", __func__);
+
+ if (!d->props->i2c_algo)
+ return 0;
+
+ strlcpy(d->i2c_adap.name, d->name, sizeof(d->i2c_adap.name));
+ d->i2c_adap.algo = d->props->i2c_algo;
+ d->i2c_adap.dev.parent = &d->udev->dev;
+ i2c_set_adapdata(&d->i2c_adap, d);
+
+ ret = i2c_add_adapter(&d->i2c_adap);
+ if (ret < 0) {
+ d->i2c_adap.algo = NULL;
+ dev_err(&d->udev->dev, "%s: i2c_add_adapter() failed=%d\n",
+ KBUILD_MODNAME, ret);
+ goto err;
+ }
+
+ return 0;
+err:
+ dev_dbg(&d->udev->dev, "%s: failed=%d\n", __func__, ret);
+ return ret;
+}
+
+static int dvb_usbv2_i2c_exit(struct dvb_usb_device *d)
+{
+ dev_dbg(&d->udev->dev, "%s:\n", __func__);
+
+ if (d->i2c_adap.algo)
+ i2c_del_adapter(&d->i2c_adap);
+
+ return 0;
+}
+
+#if IS_ENABLED(CONFIG_RC_CORE)
+static void dvb_usb_read_remote_control(struct work_struct *work)
+{
+ struct dvb_usb_device *d = container_of(work,
+ struct dvb_usb_device, rc_query_work.work);
+ int ret;
+
+ /*
+ * When the parameter has been set to 1 via sysfs while the
+ * driver was running, or when bulk mode is enabled after IR init.
+ */
+ if (dvb_usbv2_disable_rc_polling || d->rc.bulk_mode) {
+ d->rc_polling_active = false;
+ return;
+ }
+
+ ret = d->rc.query(d);
+ if (ret < 0) {
+ dev_err(&d->udev->dev, "%s: rc.query() failed=%d\n",
+ KBUILD_MODNAME, ret);
+ d->rc_polling_active = false;
+ return; /* stop polling */
+ }
+
+ schedule_delayed_work(&d->rc_query_work,
+ msecs_to_jiffies(d->rc.interval));
+}
+
+static int dvb_usbv2_remote_init(struct dvb_usb_device *d)
+{
+ int ret;
+ struct rc_dev *dev;
+ dev_dbg(&d->udev->dev, "%s:\n", __func__);
+
+ if (dvb_usbv2_disable_rc_polling || !d->props->get_rc_config)
+ return 0;
+
+ d->rc.map_name = d->rc_map;
+ ret = d->props->get_rc_config(d, &d->rc);
+ if (ret < 0)
+ goto err;
+
+ /* disable rc when there is no keymap defined */
+ if (!d->rc.map_name)
+ return 0;
+
+ dev = rc_allocate_device();
+ if (!dev) {
+ ret = -ENOMEM;
+ goto err;
+ }
+
+ dev->dev.parent = &d->udev->dev;
+ dev->input_name = d->name;
+ usb_make_path(d->udev, d->rc_phys, sizeof(d->rc_phys));
+ strlcat(d->rc_phys, "/ir0", sizeof(d->rc_phys));
+ dev->input_phys = d->rc_phys;
+ usb_to_input_id(d->udev, &dev->input_id);
+ /* TODO: likely RC-core should took const char * */
+ dev->driver_name = (char *) d->props->driver_name;
+ dev->map_name = d->rc.map_name;
+ dev->driver_type = d->rc.driver_type;
+ dev->allowed_protocols = d->rc.allowed_protos;
+ dev->change_protocol = d->rc.change_protocol;
+ dev->priv = d;
+
+ ret = rc_register_device(dev);
+ if (ret < 0) {
+ rc_free_device(dev);
+ goto err;
+ }
+
+ d->rc_dev = dev;
+
+ /* start polling if needed */
+ if (d->rc.query && !d->rc.bulk_mode) {
+ /* initialize a work queue for handling polling */
+ INIT_DELAYED_WORK(&d->rc_query_work,
+ dvb_usb_read_remote_control);
+ dev_info(&d->udev->dev,
+ "%s: schedule remote query interval to %d msecs\n",
+ KBUILD_MODNAME, d->rc.interval);
+ schedule_delayed_work(&d->rc_query_work,
+ msecs_to_jiffies(d->rc.interval));
+ d->rc_polling_active = true;
+ }
+
+ return 0;
+err:
+ dev_dbg(&d->udev->dev, "%s: failed=%d\n", __func__, ret);
+ return ret;
+}
+
+static int dvb_usbv2_remote_exit(struct dvb_usb_device *d)
+{
+ dev_dbg(&d->udev->dev, "%s:\n", __func__);
+
+ if (d->rc_dev) {
+ cancel_delayed_work_sync(&d->rc_query_work);
+ rc_unregister_device(d->rc_dev);
+ d->rc_dev = NULL;
+ }
+
+ return 0;
+}
+#else
+ #define dvb_usbv2_remote_init(args...) 0
+ #define dvb_usbv2_remote_exit(args...)
+#endif
+
+static void dvb_usb_data_complete(struct usb_data_stream *stream, u8 *buf,
+ size_t len)
+{
+ struct dvb_usb_adapter *adap = stream->user_priv;
+ dvb_dmx_swfilter(&adap->demux, buf, len);
+}
+
+static void dvb_usb_data_complete_204(struct usb_data_stream *stream, u8 *buf,
+ size_t len)
+{
+ struct dvb_usb_adapter *adap = stream->user_priv;
+ dvb_dmx_swfilter_204(&adap->demux, buf, len);
+}
+
+static void dvb_usb_data_complete_raw(struct usb_data_stream *stream, u8 *buf,
+ size_t len)
+{
+ struct dvb_usb_adapter *adap = stream->user_priv;
+ dvb_dmx_swfilter_raw(&adap->demux, buf, len);
+}
+
+static int dvb_usbv2_adapter_stream_init(struct dvb_usb_adapter *adap)
+{
+ dev_dbg(&adap_to_d(adap)->udev->dev, "%s: adap=%d\n", __func__,
+ adap->id);
+
+ adap->stream.udev = adap_to_d(adap)->udev;
+ adap->stream.user_priv = adap;
+ adap->stream.complete = dvb_usb_data_complete;
+
+ return usb_urb_initv2(&adap->stream, &adap->props->stream);
+}
+
+static int dvb_usbv2_adapter_stream_exit(struct dvb_usb_adapter *adap)
+{
+ dev_dbg(&adap_to_d(adap)->udev->dev, "%s: adap=%d\n", __func__,
+ adap->id);
+
+ return usb_urb_exitv2(&adap->stream);
+}
+
+static int dvb_usb_start_feed(struct dvb_demux_feed *dvbdmxfeed)
+{
+ struct dvb_usb_adapter *adap = dvbdmxfeed->demux->priv;
+ struct dvb_usb_device *d = adap_to_d(adap);
+ int ret = 0;
+ struct usb_data_stream_properties stream_props;
+ dev_dbg(&d->udev->dev,
+ "%s: adap=%d active_fe=%d feed_type=%d setting pid [%s]: %04x (%04d) at index %d\n",
+ __func__, adap->id, adap->active_fe, dvbdmxfeed->type,
+ adap->pid_filtering ? "yes" : "no", dvbdmxfeed->pid,
+ dvbdmxfeed->pid, dvbdmxfeed->index);
+
+ /* wait init is done */
+ wait_on_bit(&adap->state_bits, ADAP_INIT, TASK_UNINTERRUPTIBLE);
+
+ if (adap->active_fe == -1)
+ return -EINVAL;
+
+ /* skip feed setup if we are already feeding */
+ if (adap->feed_count++ > 0)
+ goto skip_feed_start;
+
+ /* set 'streaming' status bit */
+ set_bit(ADAP_STREAMING, &adap->state_bits);
+
+ /* resolve input and output streaming parameters */
+ if (d->props->get_stream_config) {
+ memcpy(&stream_props, &adap->props->stream,
+ sizeof(struct usb_data_stream_properties));
+ ret = d->props->get_stream_config(adap->fe[adap->active_fe],
+ &adap->ts_type, &stream_props);
+ if (ret)
+ dev_err(&d->udev->dev,
+ "%s: get_stream_config() failed=%d\n",
+ KBUILD_MODNAME, ret);
+ } else {
+ stream_props = adap->props->stream;
+ }
+
+ switch (adap->ts_type) {
+ case DVB_USB_FE_TS_TYPE_204:
+ adap->stream.complete = dvb_usb_data_complete_204;
+ break;
+ case DVB_USB_FE_TS_TYPE_RAW:
+ adap->stream.complete = dvb_usb_data_complete_raw;
+ break;
+ case DVB_USB_FE_TS_TYPE_188:
+ default:
+ adap->stream.complete = dvb_usb_data_complete;
+ break;
+ }
+
+ /* submit USB streaming packets */
+ usb_urb_submitv2(&adap->stream, &stream_props);
+
+ /* enable HW PID filter */
+ if (adap->pid_filtering && adap->props->pid_filter_ctrl) {
+ ret = adap->props->pid_filter_ctrl(adap, 1);
+ if (ret)
+ dev_err(&d->udev->dev,
+ "%s: pid_filter_ctrl() failed=%d\n",
+ KBUILD_MODNAME, ret);
+ }
+
+ /* ask device to start streaming */
+ if (d->props->streaming_ctrl) {
+ ret = d->props->streaming_ctrl(adap->fe[adap->active_fe], 1);
+ if (ret)
+ dev_err(&d->udev->dev,
+ "%s: streaming_ctrl() failed=%d\n",
+ KBUILD_MODNAME, ret);
+ }
+skip_feed_start:
+
+ /* add PID to device HW PID filter */
+ if (adap->pid_filtering && adap->props->pid_filter) {
+ ret = adap->props->pid_filter(adap, dvbdmxfeed->index,
+ dvbdmxfeed->pid, 1);
+ if (ret)
+ dev_err(&d->udev->dev, "%s: pid_filter() failed=%d\n",
+ KBUILD_MODNAME, ret);
+ }
+
+ if (ret)
+ dev_dbg(&d->udev->dev, "%s: failed=%d\n", __func__, ret);
+ return ret;
+}
+
+static int dvb_usb_stop_feed(struct dvb_demux_feed *dvbdmxfeed)
+{
+ struct dvb_usb_adapter *adap = dvbdmxfeed->demux->priv;
+ struct dvb_usb_device *d = adap_to_d(adap);
+ int ret = 0;
+ dev_dbg(&d->udev->dev,
+ "%s: adap=%d active_fe=%d feed_type=%d setting pid [%s]: %04x (%04d) at index %d\n",
+ __func__, adap->id, adap->active_fe, dvbdmxfeed->type,
+ adap->pid_filtering ? "yes" : "no", dvbdmxfeed->pid,
+ dvbdmxfeed->pid, dvbdmxfeed->index);
+
+ if (adap->active_fe == -1)
+ return -EINVAL;
+
+ /* remove PID from device HW PID filter */
+ if (adap->pid_filtering && adap->props->pid_filter) {
+ ret = adap->props->pid_filter(adap, dvbdmxfeed->index,
+ dvbdmxfeed->pid, 0);
+ if (ret)
+ dev_err(&d->udev->dev, "%s: pid_filter() failed=%d\n",
+ KBUILD_MODNAME, ret);
+ }
+
+ /* we cannot stop streaming until last PID is removed */
+ if (--adap->feed_count > 0)
+ goto skip_feed_stop;
+
+ /* ask device to stop streaming */
+ if (d->props->streaming_ctrl) {
+ ret = d->props->streaming_ctrl(adap->fe[adap->active_fe], 0);
+ if (ret)
+ dev_err(&d->udev->dev,
+ "%s: streaming_ctrl() failed=%d\n",
+ KBUILD_MODNAME, ret);
+ }
+
+ /* disable HW PID filter */
+ if (adap->pid_filtering && adap->props->pid_filter_ctrl) {
+ ret = adap->props->pid_filter_ctrl(adap, 0);
+ if (ret)
+ dev_err(&d->udev->dev,
+ "%s: pid_filter_ctrl() failed=%d\n",
+ KBUILD_MODNAME, ret);
+ }
+
+ /* kill USB streaming packets */
+ usb_urb_killv2(&adap->stream);
+
+ /* clear 'streaming' status bit */
+ clear_bit(ADAP_STREAMING, &adap->state_bits);
+ smp_mb__after_atomic();
+ wake_up_bit(&adap->state_bits, ADAP_STREAMING);
+skip_feed_stop:
+
+ if (ret)
+ dev_dbg(&d->udev->dev, "%s: failed=%d\n", __func__, ret);
+ return ret;
+}
+
+static void dvb_usbv2_media_device_register(struct dvb_usb_adapter *adap)
+{
+#ifdef CONFIG_MEDIA_CONTROLLER_DVB
+ struct media_device *mdev;
+ struct dvb_usb_device *d = adap_to_d(adap);
+ struct usb_device *udev = d->udev;
+ int ret;
+
+ mdev = kzalloc(sizeof(*mdev), GFP_KERNEL);
+ if (!mdev)
+ return;
+
+ mdev->dev = &udev->dev;
+ strlcpy(mdev->model, d->name, sizeof(mdev->model));
+ if (udev->serial)
+ strlcpy(mdev->serial, udev->serial, sizeof(mdev->serial));
+ strcpy(mdev->bus_info, udev->devpath);
+ mdev->hw_revision = le16_to_cpu(udev->descriptor.bcdDevice);
+ mdev->driver_version = LINUX_VERSION_CODE;
+
+ ret = media_device_register(mdev);
+ if (ret) {
+ dev_err(&d->udev->dev,
+ "Couldn't create a media device. Error: %d\n",
+ ret);
+ kfree(mdev);
+ return;
+ }
+
+ dvb_register_media_controller(&adap->dvb_adap, mdev);
+
+ dev_info(&d->udev->dev, "media controller created\n");
+
+#endif
+}
+
+static void dvb_usbv2_media_device_unregister(struct dvb_usb_adapter *adap)
+{
+#ifdef CONFIG_MEDIA_CONTROLLER_DVB
+
+ if (!adap->dvb_adap.mdev)
+ return;
+
+ media_device_unregister(adap->dvb_adap.mdev);
+ kfree(adap->dvb_adap.mdev);
+ adap->dvb_adap.mdev = NULL;
+
+#endif
+}
+
+static int dvb_usbv2_adapter_dvb_init(struct dvb_usb_adapter *adap)
+{
+ int ret;
+ struct dvb_usb_device *d = adap_to_d(adap);
+
+ dev_dbg(&d->udev->dev, "%s: adap=%d\n", __func__, adap->id);
+
+ ret = dvb_register_adapter(&adap->dvb_adap, d->name, d->props->owner,
+ &d->udev->dev, d->props->adapter_nr);
+ if (ret < 0) {
+ dev_dbg(&d->udev->dev, "%s: dvb_register_adapter() failed=%d\n",
+ __func__, ret);
+ goto err_dvb_register_adapter;
+ }
+
+ adap->dvb_adap.priv = adap;
+
+ dvb_usbv2_media_device_register(adap);
+
+ if (d->props->read_mac_address) {
+ ret = d->props->read_mac_address(adap,
+ adap->dvb_adap.proposed_mac);
+ if (ret < 0)
+ goto err_dvb_dmx_init;
+
+ dev_info(&d->udev->dev, "%s: MAC address: %pM\n",
+ KBUILD_MODNAME, adap->dvb_adap.proposed_mac);
+ }
+
+ adap->demux.dmx.capabilities = DMX_TS_FILTERING | DMX_SECTION_FILTERING;
+ adap->demux.priv = adap;
+ adap->demux.filternum = 0;
+ adap->demux.filternum = adap->max_feed_count;
+ adap->demux.feednum = adap->demux.filternum;
+ adap->demux.start_feed = dvb_usb_start_feed;
+ adap->demux.stop_feed = dvb_usb_stop_feed;
+ adap->demux.write_to_decoder = NULL;
+ ret = dvb_dmx_init(&adap->demux);
+ if (ret < 0) {
+ dev_err(&d->udev->dev, "%s: dvb_dmx_init() failed=%d\n",
+ KBUILD_MODNAME, ret);
+ goto err_dvb_dmx_init;
+ }
+
+ adap->dmxdev.filternum = adap->demux.filternum;
+ adap->dmxdev.demux = &adap->demux.dmx;
+ adap->dmxdev.capabilities = 0;
+ ret = dvb_dmxdev_init(&adap->dmxdev, &adap->dvb_adap);
+ if (ret < 0) {
+ dev_err(&d->udev->dev, "%s: dvb_dmxdev_init() failed=%d\n",
+ KBUILD_MODNAME, ret);
+ goto err_dvb_dmxdev_init;
+ }
+
+ ret = dvb_net_init(&adap->dvb_adap, &adap->dvb_net, &adap->demux.dmx);
+ if (ret < 0) {
+ dev_err(&d->udev->dev, "%s: dvb_net_init() failed=%d\n",
+ KBUILD_MODNAME, ret);
+ goto err_dvb_net_init;
+ }
+
+ return 0;
+err_dvb_net_init:
+ dvb_dmxdev_release(&adap->dmxdev);
+err_dvb_dmxdev_init:
+ dvb_dmx_release(&adap->demux);
+err_dvb_dmx_init:
+ dvb_usbv2_media_device_unregister(adap);
+ dvb_unregister_adapter(&adap->dvb_adap);
+err_dvb_register_adapter:
+ adap->dvb_adap.priv = NULL;
+ return ret;
+}
+
+static int dvb_usbv2_adapter_dvb_exit(struct dvb_usb_adapter *adap)
+{
+ dev_dbg(&adap_to_d(adap)->udev->dev, "%s: adap=%d\n", __func__,
+ adap->id);
+
+ if (adap->dvb_adap.priv) {
+ dvb_net_release(&adap->dvb_net);
+ adap->demux.dmx.close(&adap->demux.dmx);
+ dvb_dmxdev_release(&adap->dmxdev);
+ dvb_dmx_release(&adap->demux);
+ dvb_usbv2_media_device_unregister(adap);
+ dvb_unregister_adapter(&adap->dvb_adap);
+ }
+
+ return 0;
+}
+
+static int dvb_usbv2_device_power_ctrl(struct dvb_usb_device *d, int onoff)
+{
+ int ret;
+
+ if (onoff)
+ d->powered++;
+ else
+ d->powered--;
+
+ if (d->powered == 0 || (onoff && d->powered == 1)) {
+ /* when switching from 1 to 0 or from 0 to 1 */
+ dev_dbg(&d->udev->dev, "%s: power=%d\n", __func__, onoff);
+ if (d->props->power_ctrl) {
+ ret = d->props->power_ctrl(d, onoff);
+ if (ret < 0)
+ goto err;
+ }
+ }
+
+ return 0;
+err:
+ dev_dbg(&d->udev->dev, "%s: failed=%d\n", __func__, ret);
+ return ret;
+}
+
+static int dvb_usb_fe_init(struct dvb_frontend *fe)
+{
+ int ret;
+ struct dvb_usb_adapter *adap = fe->dvb->priv;
+ struct dvb_usb_device *d = adap_to_d(adap);
+ dev_dbg(&d->udev->dev, "%s: adap=%d fe=%d\n", __func__, adap->id,
+ fe->id);
+
+ if (!adap->suspend_resume_active) {
+ adap->active_fe = fe->id;
+ set_bit(ADAP_INIT, &adap->state_bits);
+ }
+
+ ret = dvb_usbv2_device_power_ctrl(d, 1);
+ if (ret < 0)
+ goto err;
+
+ if (d->props->frontend_ctrl) {
+ ret = d->props->frontend_ctrl(fe, 1);
+ if (ret < 0)
+ goto err;
+ }
+
+ if (adap->fe_init[fe->id]) {
+ ret = adap->fe_init[fe->id](fe);
+ if (ret < 0)
+ goto err;
+ }
+err:
+ if (!adap->suspend_resume_active) {
+ clear_bit(ADAP_INIT, &adap->state_bits);
+ smp_mb__after_atomic();
+ wake_up_bit(&adap->state_bits, ADAP_INIT);
+ }
+
+ dev_dbg(&d->udev->dev, "%s: ret=%d\n", __func__, ret);
+ return ret;
+}
+
+static int dvb_usb_fe_sleep(struct dvb_frontend *fe)
+{
+ int ret;
+ struct dvb_usb_adapter *adap = fe->dvb->priv;
+ struct dvb_usb_device *d = adap_to_d(adap);
+ dev_dbg(&d->udev->dev, "%s: adap=%d fe=%d\n", __func__, adap->id,
+ fe->id);
+
+ if (!adap->suspend_resume_active) {
+ set_bit(ADAP_SLEEP, &adap->state_bits);
+ wait_on_bit(&adap->state_bits, ADAP_STREAMING,
+ TASK_UNINTERRUPTIBLE);
+ }
+
+ if (adap->fe_sleep[fe->id]) {
+ ret = adap->fe_sleep[fe->id](fe);
+ if (ret < 0)
+ goto err;
+ }
+
+ if (d->props->frontend_ctrl) {
+ ret = d->props->frontend_ctrl(fe, 0);
+ if (ret < 0)
+ goto err;
+ }
+
+ ret = dvb_usbv2_device_power_ctrl(d, 0);
+ if (ret < 0)
+ goto err;
+err:
+ if (!adap->suspend_resume_active) {
+ adap->active_fe = -1;
+ clear_bit(ADAP_SLEEP, &adap->state_bits);
+ smp_mb__after_atomic();
+ wake_up_bit(&adap->state_bits, ADAP_SLEEP);
+ }
+
+ dev_dbg(&d->udev->dev, "%s: ret=%d\n", __func__, ret);
+ return ret;
+}
+
+static int dvb_usbv2_adapter_frontend_init(struct dvb_usb_adapter *adap)
+{
+ int ret, i, count_registered = 0;
+ struct dvb_usb_device *d = adap_to_d(adap);
+ dev_dbg(&d->udev->dev, "%s: adap=%d\n", __func__, adap->id);
+
+ memset(adap->fe, 0, sizeof(adap->fe));
+ adap->active_fe = -1;
+
+ if (d->props->frontend_attach) {
+ ret = d->props->frontend_attach(adap);
+ if (ret < 0) {
+ dev_dbg(&d->udev->dev,
+ "%s: frontend_attach() failed=%d\n",
+ __func__, ret);
+ goto err_dvb_frontend_detach;
+ }
+ } else {
+ dev_dbg(&d->udev->dev, "%s: frontend_attach() do not exists\n",
+ __func__);
+ ret = 0;
+ goto err;
+ }
+
+ for (i = 0; i < MAX_NO_OF_FE_PER_ADAP && adap->fe[i]; i++) {
+ adap->fe[i]->id = i;
+ /* re-assign sleep and wakeup functions */
+ adap->fe_init[i] = adap->fe[i]->ops.init;
+ adap->fe[i]->ops.init = dvb_usb_fe_init;
+ adap->fe_sleep[i] = adap->fe[i]->ops.sleep;
+ adap->fe[i]->ops.sleep = dvb_usb_fe_sleep;
+
+ ret = dvb_register_frontend(&adap->dvb_adap, adap->fe[i]);
+ if (ret < 0) {
+ dev_err(&d->udev->dev,
+ "%s: frontend%d registration failed\n",
+ KBUILD_MODNAME, i);
+ goto err_dvb_unregister_frontend;
+ }
+
+ count_registered++;
+ }
+
+ if (d->props->tuner_attach) {
+ ret = d->props->tuner_attach(adap);
+ if (ret < 0) {
+ dev_dbg(&d->udev->dev, "%s: tuner_attach() failed=%d\n",
+ __func__, ret);
+ goto err_dvb_unregister_frontend;
+ }
+ }
+
+ dvb_create_media_graph(&adap->dvb_adap);
+
+ return 0;
+
+err_dvb_unregister_frontend:
+ for (i = count_registered - 1; i >= 0; i--)
+ dvb_unregister_frontend(adap->fe[i]);
+
+err_dvb_frontend_detach:
+ for (i = MAX_NO_OF_FE_PER_ADAP - 1; i >= 0; i--) {
+ if (adap->fe[i]) {
+ dvb_frontend_detach(adap->fe[i]);
+ adap->fe[i] = NULL;
+ }
+ }
+
+err:
+ dev_dbg(&d->udev->dev, "%s: failed=%d\n", __func__, ret);
+ return ret;
+}
+
+static int dvb_usbv2_adapter_frontend_exit(struct dvb_usb_adapter *adap)
+{
+ int ret, i;
+ struct dvb_usb_device *d = adap_to_d(adap);
+
+ dev_dbg(&d->udev->dev, "%s: adap=%d\n", __func__, adap->id);
+
+ for (i = MAX_NO_OF_FE_PER_ADAP - 1; i >= 0; i--) {
+ if (adap->fe[i]) {
+ dvb_unregister_frontend(adap->fe[i]);
+ dvb_frontend_detach(adap->fe[i]);
+ }
+ }
+
+ if (d->props->tuner_detach) {
+ ret = d->props->tuner_detach(adap);
+ if (ret < 0) {
+ dev_dbg(&d->udev->dev, "%s: tuner_detach() failed=%d\n",
+ __func__, ret);
+ }
+ }
+
+ if (d->props->frontend_detach) {
+ ret = d->props->frontend_detach(adap);
+ if (ret < 0) {
+ dev_dbg(&d->udev->dev,
+ "%s: frontend_detach() failed=%d\n",
+ __func__, ret);
+ }
+ }
+
+ return 0;
+}
+
+static int dvb_usbv2_adapter_init(struct dvb_usb_device *d)
+{
+ struct dvb_usb_adapter *adap;
+ int ret, i, adapter_count;
+
+ /* resolve adapter count */
+ adapter_count = d->props->num_adapters;
+ if (d->props->get_adapter_count) {
+ ret = d->props->get_adapter_count(d);
+ if (ret < 0)
+ goto err;
+
+ adapter_count = ret;
+ }
+
+ for (i = 0; i < adapter_count; i++) {
+ adap = &d->adapter[i];
+ adap->id = i;
+ adap->props = &d->props->adapter[i];
+
+ /* speed - when running at FULL speed we need a HW PID filter */
+ if (d->udev->speed == USB_SPEED_FULL &&
+ !(adap->props->caps & DVB_USB_ADAP_HAS_PID_FILTER)) {
+ dev_err(&d->udev->dev,
+ "%s: this USB2.0 device cannot be run on a USB1.1 port (it lacks a hardware PID filter)\n",
+ KBUILD_MODNAME);
+ ret = -ENODEV;
+ goto err;
+ } else if ((d->udev->speed == USB_SPEED_FULL &&
+ adap->props->caps & DVB_USB_ADAP_HAS_PID_FILTER) ||
+ (adap->props->caps & DVB_USB_ADAP_NEED_PID_FILTERING)) {
+ dev_info(&d->udev->dev,
+ "%s: will use the device's hardware PID filter (table count: %d)\n",
+ KBUILD_MODNAME,
+ adap->props->pid_filter_count);
+ adap->pid_filtering = 1;
+ adap->max_feed_count = adap->props->pid_filter_count;
+ } else {
+ dev_info(&d->udev->dev,
+ "%s: will pass the complete MPEG2 transport stream to the software demuxer\n",
+ KBUILD_MODNAME);
+ adap->pid_filtering = 0;
+ adap->max_feed_count = 255;
+ }
+
+ if (!adap->pid_filtering && dvb_usb_force_pid_filter_usage &&
+ adap->props->caps & DVB_USB_ADAP_HAS_PID_FILTER) {
+ dev_info(&d->udev->dev,
+ "%s: PID filter enabled by module option\n",
+ KBUILD_MODNAME);
+ adap->pid_filtering = 1;
+ adap->max_feed_count = adap->props->pid_filter_count;
+ }
+
+ ret = dvb_usbv2_adapter_stream_init(adap);
+ if (ret)
+ goto err;
+
+ ret = dvb_usbv2_adapter_dvb_init(adap);
+ if (ret)
+ goto err;
+
+ ret = dvb_usbv2_adapter_frontend_init(adap);
+ if (ret)
+ goto err;
+
+ /* use exclusive FE lock if there is multiple shared FEs */
+ if (adap->fe[1])
+ adap->dvb_adap.mfe_shared = 1;
+ }
+
+ return 0;
+err:
+ dev_dbg(&d->udev->dev, "%s: failed=%d\n", __func__, ret);
+ return ret;
+}
+
+static int dvb_usbv2_adapter_exit(struct dvb_usb_device *d)
+{
+ int i;
+ dev_dbg(&d->udev->dev, "%s:\n", __func__);
+
+ for (i = MAX_NO_OF_ADAPTER_PER_DEVICE - 1; i >= 0; i--) {
+ if (d->adapter[i].props) {
+ dvb_usbv2_adapter_dvb_exit(&d->adapter[i]);
+ dvb_usbv2_adapter_stream_exit(&d->adapter[i]);
+ dvb_usbv2_adapter_frontend_exit(&d->adapter[i]);
+ }
+ }
+
+ return 0;
+}
+
+/* general initialization functions */
+static int dvb_usbv2_exit(struct dvb_usb_device *d)
+{
+ dev_dbg(&d->udev->dev, "%s:\n", __func__);
+
+ dvb_usbv2_remote_exit(d);
+ dvb_usbv2_adapter_exit(d);
+ dvb_usbv2_i2c_exit(d);
+ kfree(d->priv);
+ kfree(d);
+
+ return 0;
+}
+
+static int dvb_usbv2_init(struct dvb_usb_device *d)
+{
+ int ret;
+ dev_dbg(&d->udev->dev, "%s:\n", __func__);
+
+ dvb_usbv2_device_power_ctrl(d, 1);
+
+ if (d->props->read_config) {
+ ret = d->props->read_config(d);
+ if (ret < 0)
+ goto err;
+ }
+
+ ret = dvb_usbv2_i2c_init(d);
+ if (ret < 0)
+ goto err;
+
+ ret = dvb_usbv2_adapter_init(d);
+ if (ret < 0)
+ goto err;
+
+ if (d->props->init) {
+ ret = d->props->init(d);
+ if (ret < 0)
+ goto err;
+ }
+
+ ret = dvb_usbv2_remote_init(d);
+ if (ret < 0)
+ goto err;
+
+ dvb_usbv2_device_power_ctrl(d, 0);
+
+ return 0;
+err:
+ dvb_usbv2_device_power_ctrl(d, 0);
+ dev_dbg(&d->udev->dev, "%s: failed=%d\n", __func__, ret);
+ return ret;
+}
+
+int dvb_usbv2_probe(struct usb_interface *intf,
+ const struct usb_device_id *id)
+{
+ int ret;
+ struct dvb_usb_device *d;
+ struct usb_device *udev = interface_to_usbdev(intf);
+ struct dvb_usb_driver_info *driver_info =
+ (struct dvb_usb_driver_info *) id->driver_info;
+
+ dev_dbg(&udev->dev, "%s: bInterfaceNumber=%d\n", __func__,
+ intf->cur_altsetting->desc.bInterfaceNumber);
+
+ if (!id->driver_info) {
+ dev_err(&udev->dev, "%s: driver_info failed\n", KBUILD_MODNAME);
+ ret = -ENODEV;
+ goto err;
+ }
+
+ d = kzalloc(sizeof(struct dvb_usb_device), GFP_KERNEL);
+ if (!d) {
+ dev_err(&udev->dev, "%s: kzalloc() failed\n", KBUILD_MODNAME);
+ ret = -ENOMEM;
+ goto err;
+ }
+
+ d->intf = intf;
+ d->name = driver_info->name;
+ d->rc_map = driver_info->rc_map;
+ d->udev = udev;
+ d->props = driver_info->props;
+
+ if (intf->cur_altsetting->desc.bInterfaceNumber !=
+ d->props->bInterfaceNumber) {
+ ret = -ENODEV;
+ goto err_free_all;
+ }
+
+ mutex_init(&d->usb_mutex);
+ mutex_init(&d->i2c_mutex);
+
+ if (d->props->size_of_priv) {
+ d->priv = kzalloc(d->props->size_of_priv, GFP_KERNEL);
+ if (!d->priv) {
+ dev_err(&d->udev->dev, "%s: kzalloc() failed\n",
+ KBUILD_MODNAME);
+ ret = -ENOMEM;
+ goto err_free_all;
+ }
+ }
+
+ if (d->props->identify_state) {
+ const char *name = NULL;
+ ret = d->props->identify_state(d, &name);
+ if (ret == 0) {
+ ;
+ } else if (ret == COLD) {
+ dev_info(&d->udev->dev,
+ "%s: found a '%s' in cold state\n",
+ KBUILD_MODNAME, d->name);
+
+ if (!name)
+ name = d->props->firmware;
+
+ ret = dvb_usbv2_download_firmware(d, name);
+ if (ret == 0) {
+ /* device is warm, continue initialization */
+ ;
+ } else if (ret == RECONNECTS_USB) {
+ /*
+ * USB core will call disconnect() and then
+ * probe() as device reconnects itself from the
+ * USB bus. disconnect() will release all driver
+ * resources and probe() is called for 'new'
+ * device. As 'new' device is warm we should
+ * never go here again.
+ */
+ goto exit;
+ } else {
+ goto err_free_all;
+ }
+ } else {
+ goto err_free_all;
+ }
+ }
+
+ dev_info(&d->udev->dev, "%s: found a '%s' in warm state\n",
+ KBUILD_MODNAME, d->name);
+
+ ret = dvb_usbv2_init(d);
+ if (ret < 0)
+ goto err_free_all;
+
+ dev_info(&d->udev->dev,
+ "%s: '%s' successfully initialized and connected\n",
+ KBUILD_MODNAME, d->name);
+exit:
+ usb_set_intfdata(intf, d);
+
+ return 0;
+err_free_all:
+ dvb_usbv2_exit(d);
+err:
+ dev_dbg(&udev->dev, "%s: failed=%d\n", __func__, ret);
+ return ret;
+}
+EXPORT_SYMBOL(dvb_usbv2_probe);
+
+void dvb_usbv2_disconnect(struct usb_interface *intf)
+{
+ struct dvb_usb_device *d = usb_get_intfdata(intf);
+ const char *name = d->name;
+ struct device dev = d->udev->dev;
+
+ dev_dbg(&d->udev->dev, "%s: bInterfaceNumber=%d\n", __func__,
+ intf->cur_altsetting->desc.bInterfaceNumber);
+
+ if (d->props->exit)
+ d->props->exit(d);
+
+ dvb_usbv2_exit(d);
+
+ dev_info(&dev, "%s: '%s' successfully deinitialized and disconnected\n",
+ KBUILD_MODNAME, name);
+}
+EXPORT_SYMBOL(dvb_usbv2_disconnect);
+
+int dvb_usbv2_suspend(struct usb_interface *intf, pm_message_t msg)
+{
+ struct dvb_usb_device *d = usb_get_intfdata(intf);
+ int ret = 0, i, active_fe;
+ struct dvb_frontend *fe;
+ dev_dbg(&d->udev->dev, "%s:\n", __func__);
+
+ /* stop remote controller poll */
+ if (d->rc_polling_active)
+ cancel_delayed_work_sync(&d->rc_query_work);
+
+ for (i = MAX_NO_OF_ADAPTER_PER_DEVICE - 1; i >= 0; i--) {
+ active_fe = d->adapter[i].active_fe;
+ if (d->adapter[i].dvb_adap.priv && active_fe != -1) {
+ fe = d->adapter[i].fe[active_fe];
+ d->adapter[i].suspend_resume_active = true;
+
+ if (d->props->streaming_ctrl)
+ d->props->streaming_ctrl(fe, 0);
+
+ /* stop usb streaming */
+ usb_urb_killv2(&d->adapter[i].stream);
+
+ ret = dvb_frontend_suspend(fe);
+ }
+ }
+
+ return ret;
+}
+EXPORT_SYMBOL(dvb_usbv2_suspend);
+
+static int dvb_usbv2_resume_common(struct dvb_usb_device *d)
+{
+ int ret = 0, i, active_fe;
+ struct dvb_frontend *fe;
+ dev_dbg(&d->udev->dev, "%s:\n", __func__);
+
+ for (i = 0; i < MAX_NO_OF_ADAPTER_PER_DEVICE; i++) {
+ active_fe = d->adapter[i].active_fe;
+ if (d->adapter[i].dvb_adap.priv && active_fe != -1) {
+ fe = d->adapter[i].fe[active_fe];
+
+ ret = dvb_frontend_resume(fe);
+
+ /* resume usb streaming */
+ usb_urb_submitv2(&d->adapter[i].stream, NULL);
+
+ if (d->props->streaming_ctrl)
+ d->props->streaming_ctrl(fe, 1);
+
+ d->adapter[i].suspend_resume_active = false;
+ }
+ }
+
+ /* start remote controller poll */
+ if (d->rc_polling_active)
+ schedule_delayed_work(&d->rc_query_work,
+ msecs_to_jiffies(d->rc.interval));
+
+ return ret;
+}
+
+int dvb_usbv2_resume(struct usb_interface *intf)
+{
+ struct dvb_usb_device *d = usb_get_intfdata(intf);
+ dev_dbg(&d->udev->dev, "%s:\n", __func__);
+
+ return dvb_usbv2_resume_common(d);
+}
+EXPORT_SYMBOL(dvb_usbv2_resume);
+
+int dvb_usbv2_reset_resume(struct usb_interface *intf)
+{
+ struct dvb_usb_device *d = usb_get_intfdata(intf);
+ int ret;
+ dev_dbg(&d->udev->dev, "%s:\n", __func__);
+
+ dvb_usbv2_device_power_ctrl(d, 1);
+
+ if (d->props->init)
+ d->props->init(d);
+
+ ret = dvb_usbv2_resume_common(d);
+
+ dvb_usbv2_device_power_ctrl(d, 0);
+
+ return ret;
+}
+EXPORT_SYMBOL(dvb_usbv2_reset_resume);
+
+MODULE_VERSION("2.0");
+MODULE_AUTHOR("Patrick Boettcher <patrick.boettcher@desy.de>");
+MODULE_AUTHOR("Antti Palosaari <crope@iki.fi>");
+MODULE_DESCRIPTION("DVB USB common");
+MODULE_LICENSE("GPL");
diff --git a/kernel/drivers/media/usb/dvb-usb-v2/dvb_usb_urb.c b/kernel/drivers/media/usb/dvb-usb-v2/dvb_usb_urb.c
new file mode 100644
index 000000000..22bdce15e
--- /dev/null
+++ b/kernel/drivers/media/usb/dvb-usb-v2/dvb_usb_urb.c
@@ -0,0 +1,104 @@
+/*
+ * DVB USB framework
+ *
+ * Copyright (C) 2004-6 Patrick Boettcher <patrick.boettcher@desy.de>
+ * Copyright (C) 2012 Antti Palosaari <crope@iki.fi>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+
+#include "dvb_usb_common.h"
+
+static int dvb_usb_v2_generic_io(struct dvb_usb_device *d,
+ u8 *wbuf, u16 wlen, u8 *rbuf, u16 rlen)
+{
+ int ret, actual_length;
+
+ if (!wbuf || !wlen || !d->props->generic_bulk_ctrl_endpoint ||
+ !d->props->generic_bulk_ctrl_endpoint_response) {
+ dev_dbg(&d->udev->dev, "%s: failed=%d\n", __func__, -EINVAL);
+ return -EINVAL;
+ }
+
+ dev_dbg(&d->udev->dev, "%s: >>> %*ph\n", __func__, wlen, wbuf);
+
+ ret = usb_bulk_msg(d->udev, usb_sndbulkpipe(d->udev,
+ d->props->generic_bulk_ctrl_endpoint), wbuf, wlen,
+ &actual_length, 2000);
+ if (ret < 0)
+ dev_err(&d->udev->dev, "%s: usb_bulk_msg() failed=%d\n",
+ KBUILD_MODNAME, ret);
+ else
+ ret = actual_length != wlen ? -EIO : 0;
+
+ /* an answer is expected, and no error before */
+ if (!ret && rbuf && rlen) {
+ if (d->props->generic_bulk_ctrl_delay)
+ usleep_range(d->props->generic_bulk_ctrl_delay,
+ d->props->generic_bulk_ctrl_delay
+ + 20000);
+
+ ret = usb_bulk_msg(d->udev, usb_rcvbulkpipe(d->udev,
+ d->props->generic_bulk_ctrl_endpoint_response),
+ rbuf, rlen, &actual_length, 2000);
+ if (ret)
+ dev_err(&d->udev->dev,
+ "%s: 2nd usb_bulk_msg() failed=%d\n",
+ KBUILD_MODNAME, ret);
+
+ dev_dbg(&d->udev->dev, "%s: <<< %*ph\n", __func__,
+ actual_length, rbuf);
+ }
+
+ return ret;
+}
+
+int dvb_usbv2_generic_rw(struct dvb_usb_device *d,
+ u8 *wbuf, u16 wlen, u8 *rbuf, u16 rlen)
+{
+ int ret;
+
+ mutex_lock(&d->usb_mutex);
+ ret = dvb_usb_v2_generic_io(d, wbuf, wlen, rbuf, rlen);
+ mutex_unlock(&d->usb_mutex);
+
+ return ret;
+}
+EXPORT_SYMBOL(dvb_usbv2_generic_rw);
+
+int dvb_usbv2_generic_write(struct dvb_usb_device *d, u8 *buf, u16 len)
+{
+ int ret;
+
+ mutex_lock(&d->usb_mutex);
+ ret = dvb_usb_v2_generic_io(d, buf, len, NULL, 0);
+ mutex_unlock(&d->usb_mutex);
+
+ return ret;
+}
+EXPORT_SYMBOL(dvb_usbv2_generic_write);
+
+int dvb_usbv2_generic_rw_locked(struct dvb_usb_device *d,
+ u8 *wbuf, u16 wlen, u8 *rbuf, u16 rlen)
+{
+ return dvb_usb_v2_generic_io(d, wbuf, wlen, rbuf, rlen);
+}
+EXPORT_SYMBOL(dvb_usbv2_generic_rw_locked);
+
+int dvb_usbv2_generic_write_locked(struct dvb_usb_device *d, u8 *buf, u16 len)
+{
+ return dvb_usb_v2_generic_io(d, buf, len, NULL, 0);
+}
+EXPORT_SYMBOL(dvb_usbv2_generic_write_locked);
diff --git a/kernel/drivers/media/usb/dvb-usb-v2/dvbsky.c b/kernel/drivers/media/usb/dvb-usb-v2/dvbsky.c
new file mode 100644
index 000000000..cdf59bcd7
--- /dev/null
+++ b/kernel/drivers/media/usb/dvb-usb-v2/dvbsky.c
@@ -0,0 +1,864 @@
+/*
+ * Driver for DVBSky USB2.0 receiver
+ *
+ * Copyright (C) 2013 Max nibble <nibble.max@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include "dvb_usb.h"
+#include "m88ds3103.h"
+#include "ts2020.h"
+#include "sp2.h"
+#include "si2168.h"
+#include "si2157.h"
+
+#define DVBSKY_MSG_DELAY 0/*2000*/
+#define DVBSKY_BUF_LEN 64
+
+static int dvb_usb_dvbsky_disable_rc;
+module_param_named(disable_rc, dvb_usb_dvbsky_disable_rc, int, 0644);
+MODULE_PARM_DESC(disable_rc, "Disable inbuilt IR receiver.");
+
+DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
+
+struct dvbsky_state {
+ struct mutex stream_mutex;
+ u8 ibuf[DVBSKY_BUF_LEN];
+ u8 obuf[DVBSKY_BUF_LEN];
+ u8 last_lock;
+ struct i2c_client *i2c_client_demod;
+ struct i2c_client *i2c_client_tuner;
+ struct i2c_client *i2c_client_ci;
+
+ /* fe hook functions*/
+ int (*fe_set_voltage)(struct dvb_frontend *fe,
+ fe_sec_voltage_t voltage);
+ int (*fe_read_status)(struct dvb_frontend *fe,
+ fe_status_t *status);
+};
+
+static int dvbsky_usb_generic_rw(struct dvb_usb_device *d,
+ u8 *wbuf, u16 wlen, u8 *rbuf, u16 rlen)
+{
+ int ret;
+ struct dvbsky_state *state = d_to_priv(d);
+
+ mutex_lock(&d->usb_mutex);
+ if (wlen != 0)
+ memcpy(state->obuf, wbuf, wlen);
+
+ ret = dvb_usbv2_generic_rw_locked(d, state->obuf, wlen,
+ state->ibuf, rlen);
+
+ if (!ret && (rlen != 0))
+ memcpy(rbuf, state->ibuf, rlen);
+
+ mutex_unlock(&d->usb_mutex);
+ return ret;
+}
+
+static int dvbsky_stream_ctrl(struct dvb_usb_device *d, u8 onoff)
+{
+ struct dvbsky_state *state = d_to_priv(d);
+ int ret;
+ u8 obuf_pre[3] = { 0x37, 0, 0 };
+ u8 obuf_post[3] = { 0x36, 3, 0 };
+
+ mutex_lock(&state->stream_mutex);
+ ret = dvbsky_usb_generic_rw(d, obuf_pre, 3, NULL, 0);
+ if (!ret && onoff) {
+ msleep(20);
+ ret = dvbsky_usb_generic_rw(d, obuf_post, 3, NULL, 0);
+ }
+ mutex_unlock(&state->stream_mutex);
+ return ret;
+}
+
+static int dvbsky_streaming_ctrl(struct dvb_frontend *fe, int onoff)
+{
+ struct dvb_usb_device *d = fe_to_d(fe);
+
+ return dvbsky_stream_ctrl(d, (onoff == 0) ? 0 : 1);
+}
+
+/* GPIO */
+static int dvbsky_gpio_ctrl(struct dvb_usb_device *d, u8 gport, u8 value)
+{
+ int ret;
+ u8 obuf[3], ibuf[2];
+
+ obuf[0] = 0x0e;
+ obuf[1] = gport;
+ obuf[2] = value;
+ ret = dvbsky_usb_generic_rw(d, obuf, 3, ibuf, 1);
+ if (ret)
+ dev_err(&d->udev->dev, "failed=%d\n", ret);
+ return ret;
+}
+
+/* I2C */
+static int dvbsky_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msg[],
+ int num)
+{
+ struct dvb_usb_device *d = i2c_get_adapdata(adap);
+ int ret = 0;
+ u8 ibuf[64], obuf[64];
+
+ if (mutex_lock_interruptible(&d->i2c_mutex) < 0)
+ return -EAGAIN;
+
+ if (num > 2) {
+ dev_err(&d->udev->dev,
+ "too many i2c messages[%d], max 2.", num);
+ ret = -EOPNOTSUPP;
+ goto i2c_error;
+ }
+
+ if (num == 1) {
+ if (msg[0].len > 60) {
+ dev_err(&d->udev->dev,
+ "too many i2c bytes[%d], max 60.",
+ msg[0].len);
+ ret = -EOPNOTSUPP;
+ goto i2c_error;
+ }
+ if (msg[0].flags & I2C_M_RD) {
+ /* single read */
+ obuf[0] = 0x09;
+ obuf[1] = 0;
+ obuf[2] = msg[0].len;
+ obuf[3] = msg[0].addr;
+ ret = dvbsky_usb_generic_rw(d, obuf, 4,
+ ibuf, msg[0].len + 1);
+ if (ret)
+ dev_err(&d->udev->dev, "failed=%d\n", ret);
+ if (!ret)
+ memcpy(msg[0].buf, &ibuf[1], msg[0].len);
+ } else {
+ /* write */
+ obuf[0] = 0x08;
+ obuf[1] = msg[0].addr;
+ obuf[2] = msg[0].len;
+ memcpy(&obuf[3], msg[0].buf, msg[0].len);
+ ret = dvbsky_usb_generic_rw(d, obuf,
+ msg[0].len + 3, ibuf, 1);
+ if (ret)
+ dev_err(&d->udev->dev, "failed=%d\n", ret);
+ }
+ } else {
+ if ((msg[0].len > 60) || (msg[1].len > 60)) {
+ dev_err(&d->udev->dev,
+ "too many i2c bytes[w-%d][r-%d], max 60.",
+ msg[0].len, msg[1].len);
+ ret = -EOPNOTSUPP;
+ goto i2c_error;
+ }
+ /* write then read */
+ obuf[0] = 0x09;
+ obuf[1] = msg[0].len;
+ obuf[2] = msg[1].len;
+ obuf[3] = msg[0].addr;
+ memcpy(&obuf[4], msg[0].buf, msg[0].len);
+ ret = dvbsky_usb_generic_rw(d, obuf,
+ msg[0].len + 4, ibuf, msg[1].len + 1);
+ if (ret)
+ dev_err(&d->udev->dev, "failed=%d\n", ret);
+
+ if (!ret)
+ memcpy(msg[1].buf, &ibuf[1], msg[1].len);
+ }
+i2c_error:
+ mutex_unlock(&d->i2c_mutex);
+ return (ret) ? ret : num;
+}
+
+static u32 dvbsky_i2c_func(struct i2c_adapter *adapter)
+{
+ return I2C_FUNC_I2C;
+}
+
+static struct i2c_algorithm dvbsky_i2c_algo = {
+ .master_xfer = dvbsky_i2c_xfer,
+ .functionality = dvbsky_i2c_func,
+};
+
+#if IS_ENABLED(CONFIG_RC_CORE)
+static int dvbsky_rc_query(struct dvb_usb_device *d)
+{
+ u32 code = 0xffff, scancode;
+ u8 rc5_command, rc5_system;
+ u8 obuf[2], ibuf[2], toggle;
+ int ret;
+
+ obuf[0] = 0x10;
+ ret = dvbsky_usb_generic_rw(d, obuf, 1, ibuf, 2);
+ if (ret)
+ dev_err(&d->udev->dev, "failed=%d\n", ret);
+ if (ret == 0)
+ code = (ibuf[0] << 8) | ibuf[1];
+ if (code != 0xffff) {
+ dev_dbg(&d->udev->dev, "rc code: %x\n", code);
+ rc5_command = code & 0x3F;
+ rc5_system = (code & 0x7C0) >> 6;
+ toggle = (code & 0x800) ? 1 : 0;
+ scancode = rc5_system << 8 | rc5_command;
+ rc_keydown(d->rc_dev, RC_TYPE_RC5, scancode, toggle);
+ }
+ return 0;
+}
+
+static int dvbsky_get_rc_config(struct dvb_usb_device *d, struct dvb_usb_rc *rc)
+{
+ if (dvb_usb_dvbsky_disable_rc) {
+ rc->map_name = NULL;
+ return 0;
+ }
+
+ rc->allowed_protos = RC_BIT_RC5;
+ rc->query = dvbsky_rc_query;
+ rc->interval = 300;
+ return 0;
+}
+#else
+ #define dvbsky_get_rc_config NULL
+#endif
+
+static int dvbsky_usb_set_voltage(struct dvb_frontend *fe,
+ fe_sec_voltage_t voltage)
+{
+ struct dvb_usb_device *d = fe_to_d(fe);
+ struct dvbsky_state *state = d_to_priv(d);
+ u8 value;
+
+ if (voltage == SEC_VOLTAGE_OFF)
+ value = 0;
+ else
+ value = 1;
+ dvbsky_gpio_ctrl(d, 0x80, value);
+
+ return state->fe_set_voltage(fe, voltage);
+}
+
+static int dvbsky_read_mac_addr(struct dvb_usb_adapter *adap, u8 mac[6])
+{
+ struct dvb_usb_device *d = adap_to_d(adap);
+ u8 obuf[] = { 0x1e, 0x00 };
+ u8 ibuf[6] = { 0 };
+ struct i2c_msg msg[] = {
+ {
+ .addr = 0x51,
+ .flags = 0,
+ .buf = obuf,
+ .len = 2,
+ }, {
+ .addr = 0x51,
+ .flags = I2C_M_RD,
+ .buf = ibuf,
+ .len = 6,
+ }
+ };
+
+ if (i2c_transfer(&d->i2c_adap, msg, 2) == 2)
+ memcpy(mac, ibuf, 6);
+
+ return 0;
+}
+
+static int dvbsky_usb_read_status(struct dvb_frontend *fe, fe_status_t *status)
+{
+ struct dvb_usb_device *d = fe_to_d(fe);
+ struct dvbsky_state *state = d_to_priv(d);
+ int ret;
+
+ ret = state->fe_read_status(fe, status);
+
+ /* it need resync slave fifo when signal change from unlock to lock.*/
+ if ((*status & FE_HAS_LOCK) && (!state->last_lock))
+ dvbsky_stream_ctrl(d, 1);
+
+ state->last_lock = (*status & FE_HAS_LOCK) ? 1 : 0;
+ return ret;
+}
+
+static const struct m88ds3103_config dvbsky_s960_m88ds3103_config = {
+ .i2c_addr = 0x68,
+ .clock = 27000000,
+ .i2c_wr_max = 33,
+ .clock_out = 0,
+ .ts_mode = M88DS3103_TS_CI,
+ .ts_clk = 16000,
+ .ts_clk_pol = 0,
+ .agc = 0x99,
+ .lnb_hv_pol = 1,
+ .lnb_en_pol = 1,
+};
+
+static int dvbsky_s960_attach(struct dvb_usb_adapter *adap)
+{
+ struct dvbsky_state *state = adap_to_priv(adap);
+ struct dvb_usb_device *d = adap_to_d(adap);
+ int ret = 0;
+ /* demod I2C adapter */
+ struct i2c_adapter *i2c_adapter;
+ struct i2c_client *client;
+ struct i2c_board_info info;
+ struct ts2020_config ts2020_config = {};
+ memset(&info, 0, sizeof(struct i2c_board_info));
+
+ /* attach demod */
+ adap->fe[0] = dvb_attach(m88ds3103_attach,
+ &dvbsky_s960_m88ds3103_config,
+ &d->i2c_adap,
+ &i2c_adapter);
+ if (!adap->fe[0]) {
+ dev_err(&d->udev->dev, "dvbsky_s960_attach fail.\n");
+ ret = -ENODEV;
+ goto fail_attach;
+ }
+
+ /* attach tuner */
+ ts2020_config.fe = adap->fe[0];
+ strlcpy(info.type, "ts2020", I2C_NAME_SIZE);
+ info.addr = 0x60;
+ info.platform_data = &ts2020_config;
+ request_module("ts2020");
+ client = i2c_new_device(i2c_adapter, &info);
+ if (client == NULL || client->dev.driver == NULL) {
+ dvb_frontend_detach(adap->fe[0]);
+ ret = -ENODEV;
+ goto fail_attach;
+ }
+
+ if (!try_module_get(client->dev.driver->owner)) {
+ i2c_unregister_device(client);
+ dvb_frontend_detach(adap->fe[0]);
+ ret = -ENODEV;
+ goto fail_attach;
+ }
+
+ /* delegate signal strength measurement to tuner */
+ adap->fe[0]->ops.read_signal_strength =
+ adap->fe[0]->ops.tuner_ops.get_rf_strength;
+
+ /* hook fe: need to resync the slave fifo when signal locks. */
+ state->fe_read_status = adap->fe[0]->ops.read_status;
+ adap->fe[0]->ops.read_status = dvbsky_usb_read_status;
+
+ /* hook fe: LNB off/on is control by Cypress usb chip. */
+ state->fe_set_voltage = adap->fe[0]->ops.set_voltage;
+ adap->fe[0]->ops.set_voltage = dvbsky_usb_set_voltage;
+
+ state->i2c_client_tuner = client;
+
+fail_attach:
+ return ret;
+}
+
+static int dvbsky_usb_ci_set_voltage(struct dvb_frontend *fe,
+ fe_sec_voltage_t voltage)
+{
+ struct dvb_usb_device *d = fe_to_d(fe);
+ struct dvbsky_state *state = d_to_priv(d);
+ u8 value;
+
+ if (voltage == SEC_VOLTAGE_OFF)
+ value = 0;
+ else
+ value = 1;
+ dvbsky_gpio_ctrl(d, 0x00, value);
+
+ return state->fe_set_voltage(fe, voltage);
+}
+
+static int dvbsky_ci_ctrl(void *priv, u8 read, int addr,
+ u8 data, int *mem)
+{
+ struct dvb_usb_device *d = priv;
+ int ret = 0;
+ u8 command[4], respond[2], command_size, respond_size;
+
+ command[1] = (u8)((addr >> 8) & 0xff); /*high part of address*/
+ command[2] = (u8)(addr & 0xff); /*low part of address*/
+ if (read) {
+ command[0] = 0x71;
+ command_size = 3;
+ respond_size = 2;
+ } else {
+ command[0] = 0x70;
+ command[3] = data;
+ command_size = 4;
+ respond_size = 1;
+ }
+ ret = dvbsky_usb_generic_rw(d, command, command_size,
+ respond, respond_size);
+ if (ret)
+ goto err;
+ if (read)
+ *mem = respond[1];
+ return ret;
+err:
+ dev_err(&d->udev->dev, "ci control failed=%d\n", ret);
+ return ret;
+}
+
+static const struct m88ds3103_config dvbsky_s960c_m88ds3103_config = {
+ .i2c_addr = 0x68,
+ .clock = 27000000,
+ .i2c_wr_max = 33,
+ .clock_out = 0,
+ .ts_mode = M88DS3103_TS_CI,
+ .ts_clk = 10000,
+ .ts_clk_pol = 1,
+ .agc = 0x99,
+ .lnb_hv_pol = 0,
+ .lnb_en_pol = 1,
+};
+
+static int dvbsky_s960c_attach(struct dvb_usb_adapter *adap)
+{
+ struct dvbsky_state *state = adap_to_priv(adap);
+ struct dvb_usb_device *d = adap_to_d(adap);
+ int ret = 0;
+ /* demod I2C adapter */
+ struct i2c_adapter *i2c_adapter;
+ struct i2c_client *client_tuner, *client_ci;
+ struct i2c_board_info info;
+ struct sp2_config sp2_config;
+ struct ts2020_config ts2020_config = {};
+ memset(&info, 0, sizeof(struct i2c_board_info));
+
+ /* attach demod */
+ adap->fe[0] = dvb_attach(m88ds3103_attach,
+ &dvbsky_s960c_m88ds3103_config,
+ &d->i2c_adap,
+ &i2c_adapter);
+ if (!adap->fe[0]) {
+ dev_err(&d->udev->dev, "dvbsky_s960ci_attach fail.\n");
+ ret = -ENODEV;
+ goto fail_attach;
+ }
+
+ /* attach tuner */
+ ts2020_config.fe = adap->fe[0];
+ strlcpy(info.type, "ts2020", I2C_NAME_SIZE);
+ info.addr = 0x60;
+ info.platform_data = &ts2020_config;
+ request_module("ts2020");
+ client_tuner = i2c_new_device(i2c_adapter, &info);
+ if (client_tuner == NULL || client_tuner->dev.driver == NULL) {
+ ret = -ENODEV;
+ goto fail_tuner_device;
+ }
+
+ if (!try_module_get(client_tuner->dev.driver->owner)) {
+ ret = -ENODEV;
+ goto fail_tuner_module;
+ }
+
+ /* attach ci controller */
+ memset(&sp2_config, 0, sizeof(sp2_config));
+ sp2_config.dvb_adap = &adap->dvb_adap;
+ sp2_config.priv = d;
+ sp2_config.ci_control = dvbsky_ci_ctrl;
+ memset(&info, 0, sizeof(struct i2c_board_info));
+ strlcpy(info.type, "sp2", I2C_NAME_SIZE);
+ info.addr = 0x40;
+ info.platform_data = &sp2_config;
+ request_module("sp2");
+ client_ci = i2c_new_device(&d->i2c_adap, &info);
+ if (client_ci == NULL || client_ci->dev.driver == NULL) {
+ ret = -ENODEV;
+ goto fail_ci_device;
+ }
+
+ if (!try_module_get(client_ci->dev.driver->owner)) {
+ ret = -ENODEV;
+ goto fail_ci_module;
+ }
+
+ /* delegate signal strength measurement to tuner */
+ adap->fe[0]->ops.read_signal_strength =
+ adap->fe[0]->ops.tuner_ops.get_rf_strength;
+
+ /* hook fe: need to resync the slave fifo when signal locks. */
+ state->fe_read_status = adap->fe[0]->ops.read_status;
+ adap->fe[0]->ops.read_status = dvbsky_usb_read_status;
+
+ /* hook fe: LNB off/on is control by Cypress usb chip. */
+ state->fe_set_voltage = adap->fe[0]->ops.set_voltage;
+ adap->fe[0]->ops.set_voltage = dvbsky_usb_ci_set_voltage;
+
+ state->i2c_client_tuner = client_tuner;
+ state->i2c_client_ci = client_ci;
+ return ret;
+fail_ci_module:
+ i2c_unregister_device(client_ci);
+fail_ci_device:
+ module_put(client_tuner->dev.driver->owner);
+fail_tuner_module:
+ i2c_unregister_device(client_tuner);
+fail_tuner_device:
+ dvb_frontend_detach(adap->fe[0]);
+fail_attach:
+ return ret;
+}
+
+static int dvbsky_t680c_attach(struct dvb_usb_adapter *adap)
+{
+ struct dvbsky_state *state = adap_to_priv(adap);
+ struct dvb_usb_device *d = adap_to_d(adap);
+ int ret = 0;
+ struct i2c_adapter *i2c_adapter;
+ struct i2c_client *client_demod, *client_tuner, *client_ci;
+ struct i2c_board_info info;
+ struct si2168_config si2168_config;
+ struct si2157_config si2157_config;
+ struct sp2_config sp2_config;
+
+ /* attach demod */
+ memset(&si2168_config, 0, sizeof(si2168_config));
+ si2168_config.i2c_adapter = &i2c_adapter;
+ si2168_config.fe = &adap->fe[0];
+ si2168_config.ts_mode = SI2168_TS_PARALLEL;
+ memset(&info, 0, sizeof(struct i2c_board_info));
+ strlcpy(info.type, "si2168", I2C_NAME_SIZE);
+ info.addr = 0x64;
+ info.platform_data = &si2168_config;
+
+ request_module(info.type);
+ client_demod = i2c_new_device(&d->i2c_adap, &info);
+ if (client_demod == NULL ||
+ client_demod->dev.driver == NULL)
+ goto fail_demod_device;
+ if (!try_module_get(client_demod->dev.driver->owner))
+ goto fail_demod_module;
+
+ /* attach tuner */
+ memset(&si2157_config, 0, sizeof(si2157_config));
+ si2157_config.fe = adap->fe[0];
+ memset(&info, 0, sizeof(struct i2c_board_info));
+ strlcpy(info.type, "si2157", I2C_NAME_SIZE);
+ info.addr = 0x60;
+ info.platform_data = &si2157_config;
+
+ request_module(info.type);
+ client_tuner = i2c_new_device(i2c_adapter, &info);
+ if (client_tuner == NULL ||
+ client_tuner->dev.driver == NULL)
+ goto fail_tuner_device;
+ if (!try_module_get(client_tuner->dev.driver->owner))
+ goto fail_tuner_module;
+
+ /* attach ci controller */
+ memset(&sp2_config, 0, sizeof(sp2_config));
+ sp2_config.dvb_adap = &adap->dvb_adap;
+ sp2_config.priv = d;
+ sp2_config.ci_control = dvbsky_ci_ctrl;
+ memset(&info, 0, sizeof(struct i2c_board_info));
+ strlcpy(info.type, "sp2", I2C_NAME_SIZE);
+ info.addr = 0x40;
+ info.platform_data = &sp2_config;
+
+ request_module(info.type);
+ client_ci = i2c_new_device(&d->i2c_adap, &info);
+
+ if (client_ci == NULL || client_ci->dev.driver == NULL)
+ goto fail_ci_device;
+
+ if (!try_module_get(client_ci->dev.driver->owner))
+ goto fail_ci_module;
+
+ state->i2c_client_demod = client_demod;
+ state->i2c_client_tuner = client_tuner;
+ state->i2c_client_ci = client_ci;
+ return ret;
+fail_ci_module:
+ i2c_unregister_device(client_ci);
+fail_ci_device:
+ module_put(client_tuner->dev.driver->owner);
+fail_tuner_module:
+ i2c_unregister_device(client_tuner);
+fail_tuner_device:
+ module_put(client_demod->dev.driver->owner);
+fail_demod_module:
+ i2c_unregister_device(client_demod);
+fail_demod_device:
+ ret = -ENODEV;
+ return ret;
+}
+
+static int dvbsky_t330_attach(struct dvb_usb_adapter *adap)
+{
+ struct dvbsky_state *state = adap_to_priv(adap);
+ struct dvb_usb_device *d = adap_to_d(adap);
+ int ret = 0;
+ struct i2c_adapter *i2c_adapter;
+ struct i2c_client *client_demod, *client_tuner;
+ struct i2c_board_info info;
+ struct si2168_config si2168_config;
+ struct si2157_config si2157_config;
+
+ /* attach demod */
+ memset(&si2168_config, 0, sizeof(si2168_config));
+ si2168_config.i2c_adapter = &i2c_adapter;
+ si2168_config.fe = &adap->fe[0];
+ si2168_config.ts_mode = SI2168_TS_PARALLEL | 0x40;
+ memset(&info, 0, sizeof(struct i2c_board_info));
+ strlcpy(info.type, "si2168", I2C_NAME_SIZE);
+ info.addr = 0x64;
+ info.platform_data = &si2168_config;
+
+ request_module(info.type);
+ client_demod = i2c_new_device(&d->i2c_adap, &info);
+ if (client_demod == NULL ||
+ client_demod->dev.driver == NULL)
+ goto fail_demod_device;
+ if (!try_module_get(client_demod->dev.driver->owner))
+ goto fail_demod_module;
+
+ /* attach tuner */
+ memset(&si2157_config, 0, sizeof(si2157_config));
+ si2157_config.fe = adap->fe[0];
+ memset(&info, 0, sizeof(struct i2c_board_info));
+ strlcpy(info.type, "si2157", I2C_NAME_SIZE);
+ info.addr = 0x60;
+ info.platform_data = &si2157_config;
+
+ request_module(info.type);
+ client_tuner = i2c_new_device(i2c_adapter, &info);
+ if (client_tuner == NULL ||
+ client_tuner->dev.driver == NULL)
+ goto fail_tuner_device;
+ if (!try_module_get(client_tuner->dev.driver->owner))
+ goto fail_tuner_module;
+
+ state->i2c_client_demod = client_demod;
+ state->i2c_client_tuner = client_tuner;
+ return ret;
+fail_tuner_module:
+ i2c_unregister_device(client_tuner);
+fail_tuner_device:
+ module_put(client_demod->dev.driver->owner);
+fail_demod_module:
+ i2c_unregister_device(client_demod);
+fail_demod_device:
+ ret = -ENODEV;
+ return ret;
+}
+
+static int dvbsky_identify_state(struct dvb_usb_device *d, const char **name)
+{
+ dvbsky_gpio_ctrl(d, 0x04, 1);
+ msleep(20);
+ dvbsky_gpio_ctrl(d, 0x83, 0);
+ dvbsky_gpio_ctrl(d, 0xc0, 1);
+ msleep(100);
+ dvbsky_gpio_ctrl(d, 0x83, 1);
+ dvbsky_gpio_ctrl(d, 0xc0, 0);
+ msleep(50);
+
+ return WARM;
+}
+
+static int dvbsky_init(struct dvb_usb_device *d)
+{
+ struct dvbsky_state *state = d_to_priv(d);
+
+ /* use default interface */
+ /*
+ ret = usb_set_interface(d->udev, 0, 0);
+ if (ret)
+ return ret;
+ */
+ mutex_init(&state->stream_mutex);
+
+ state->last_lock = 0;
+
+ return 0;
+}
+
+static void dvbsky_exit(struct dvb_usb_device *d)
+{
+ struct dvbsky_state *state = d_to_priv(d);
+ struct i2c_client *client;
+
+ client = state->i2c_client_tuner;
+ /* remove I2C tuner */
+ if (client) {
+ module_put(client->dev.driver->owner);
+ i2c_unregister_device(client);
+ }
+ client = state->i2c_client_demod;
+ /* remove I2C demod */
+ if (client) {
+ module_put(client->dev.driver->owner);
+ i2c_unregister_device(client);
+ }
+ client = state->i2c_client_ci;
+ /* remove I2C ci */
+ if (client) {
+ module_put(client->dev.driver->owner);
+ i2c_unregister_device(client);
+ }
+}
+
+/* DVB USB Driver stuff */
+static struct dvb_usb_device_properties dvbsky_s960_props = {
+ .driver_name = KBUILD_MODNAME,
+ .owner = THIS_MODULE,
+ .adapter_nr = adapter_nr,
+ .size_of_priv = sizeof(struct dvbsky_state),
+
+ .generic_bulk_ctrl_endpoint = 0x01,
+ .generic_bulk_ctrl_endpoint_response = 0x81,
+ .generic_bulk_ctrl_delay = DVBSKY_MSG_DELAY,
+
+ .i2c_algo = &dvbsky_i2c_algo,
+ .frontend_attach = dvbsky_s960_attach,
+ .init = dvbsky_init,
+ .get_rc_config = dvbsky_get_rc_config,
+ .streaming_ctrl = dvbsky_streaming_ctrl,
+ .identify_state = dvbsky_identify_state,
+ .exit = dvbsky_exit,
+ .read_mac_address = dvbsky_read_mac_addr,
+
+ .num_adapters = 1,
+ .adapter = {
+ {
+ .stream = DVB_USB_STREAM_BULK(0x82, 8, 4096),
+ }
+ }
+};
+
+static struct dvb_usb_device_properties dvbsky_s960c_props = {
+ .driver_name = KBUILD_MODNAME,
+ .owner = THIS_MODULE,
+ .adapter_nr = adapter_nr,
+ .size_of_priv = sizeof(struct dvbsky_state),
+
+ .generic_bulk_ctrl_endpoint = 0x01,
+ .generic_bulk_ctrl_endpoint_response = 0x81,
+ .generic_bulk_ctrl_delay = DVBSKY_MSG_DELAY,
+
+ .i2c_algo = &dvbsky_i2c_algo,
+ .frontend_attach = dvbsky_s960c_attach,
+ .init = dvbsky_init,
+ .get_rc_config = dvbsky_get_rc_config,
+ .streaming_ctrl = dvbsky_streaming_ctrl,
+ .identify_state = dvbsky_identify_state,
+ .exit = dvbsky_exit,
+ .read_mac_address = dvbsky_read_mac_addr,
+
+ .num_adapters = 1,
+ .adapter = {
+ {
+ .stream = DVB_USB_STREAM_BULK(0x82, 8, 4096),
+ }
+ }
+};
+
+static struct dvb_usb_device_properties dvbsky_t680c_props = {
+ .driver_name = KBUILD_MODNAME,
+ .owner = THIS_MODULE,
+ .adapter_nr = adapter_nr,
+ .size_of_priv = sizeof(struct dvbsky_state),
+
+ .generic_bulk_ctrl_endpoint = 0x01,
+ .generic_bulk_ctrl_endpoint_response = 0x81,
+ .generic_bulk_ctrl_delay = DVBSKY_MSG_DELAY,
+
+ .i2c_algo = &dvbsky_i2c_algo,
+ .frontend_attach = dvbsky_t680c_attach,
+ .init = dvbsky_init,
+ .get_rc_config = dvbsky_get_rc_config,
+ .streaming_ctrl = dvbsky_streaming_ctrl,
+ .identify_state = dvbsky_identify_state,
+ .exit = dvbsky_exit,
+ .read_mac_address = dvbsky_read_mac_addr,
+
+ .num_adapters = 1,
+ .adapter = {
+ {
+ .stream = DVB_USB_STREAM_BULK(0x82, 8, 4096),
+ }
+ }
+};
+
+static struct dvb_usb_device_properties dvbsky_t330_props = {
+ .driver_name = KBUILD_MODNAME,
+ .owner = THIS_MODULE,
+ .adapter_nr = adapter_nr,
+ .size_of_priv = sizeof(struct dvbsky_state),
+
+ .generic_bulk_ctrl_endpoint = 0x01,
+ .generic_bulk_ctrl_endpoint_response = 0x81,
+ .generic_bulk_ctrl_delay = DVBSKY_MSG_DELAY,
+
+ .i2c_algo = &dvbsky_i2c_algo,
+ .frontend_attach = dvbsky_t330_attach,
+ .init = dvbsky_init,
+ .get_rc_config = dvbsky_get_rc_config,
+ .streaming_ctrl = dvbsky_streaming_ctrl,
+ .identify_state = dvbsky_identify_state,
+ .exit = dvbsky_exit,
+ .read_mac_address = dvbsky_read_mac_addr,
+
+ .num_adapters = 1,
+ .adapter = {
+ {
+ .stream = DVB_USB_STREAM_BULK(0x82, 8, 4096),
+ }
+ }
+};
+
+static const struct usb_device_id dvbsky_id_table[] = {
+ { DVB_USB_DEVICE(0x0572, 0x6831,
+ &dvbsky_s960_props, "DVBSky S960/S860", RC_MAP_DVBSKY) },
+ { DVB_USB_DEVICE(0x0572, 0x960c,
+ &dvbsky_s960c_props, "DVBSky S960CI", RC_MAP_DVBSKY) },
+ { DVB_USB_DEVICE(0x0572, 0x680c,
+ &dvbsky_t680c_props, "DVBSky T680CI", RC_MAP_DVBSKY) },
+ { DVB_USB_DEVICE(0x0572, 0x0320,
+ &dvbsky_t330_props, "DVBSky T330", RC_MAP_DVBSKY) },
+ { DVB_USB_DEVICE(USB_VID_TECHNOTREND,
+ USB_PID_TECHNOTREND_TVSTICK_CT2_4400,
+ &dvbsky_t330_props, "TechnoTrend TVStick CT2-4400",
+ RC_MAP_TT_1500) },
+ { DVB_USB_DEVICE(USB_VID_TECHNOTREND,
+ USB_PID_TECHNOTREND_CONNECT_CT2_4650_CI,
+ &dvbsky_t680c_props, "TechnoTrend TT-connect CT2-4650 CI",
+ RC_MAP_TT_1500) },
+ { }
+};
+MODULE_DEVICE_TABLE(usb, dvbsky_id_table);
+
+static struct usb_driver dvbsky_usb_driver = {
+ .name = KBUILD_MODNAME,
+ .id_table = dvbsky_id_table,
+ .probe = dvb_usbv2_probe,
+ .disconnect = dvb_usbv2_disconnect,
+ .suspend = dvb_usbv2_suspend,
+ .resume = dvb_usbv2_resume,
+ .reset_resume = dvb_usbv2_reset_resume,
+ .no_dynamic_id = 1,
+ .soft_unbind = 1,
+};
+
+module_usb_driver(dvbsky_usb_driver);
+
+MODULE_AUTHOR("Max nibble <nibble.max@gmail.com>");
+MODULE_DESCRIPTION("Driver for DVBSky USB");
+MODULE_LICENSE("GPL");
diff --git a/kernel/drivers/media/usb/dvb-usb-v2/ec168.c b/kernel/drivers/media/usb/dvb-usb-v2/ec168.c
new file mode 100644
index 000000000..0c2b37770
--- /dev/null
+++ b/kernel/drivers/media/usb/dvb-usb-v2/ec168.c
@@ -0,0 +1,385 @@
+/*
+ * E3C EC168 DVB USB driver
+ *
+ * Copyright (C) 2009 Antti Palosaari <crope@iki.fi>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+
+#include "ec168.h"
+#include "ec100.h"
+#include "mxl5005s.h"
+
+DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
+
+static int ec168_ctrl_msg(struct dvb_usb_device *d, struct ec168_req *req)
+{
+ int ret;
+ unsigned int pipe;
+ u8 request, requesttype;
+ u8 *buf;
+
+ switch (req->cmd) {
+ case DOWNLOAD_FIRMWARE:
+ case GPIO:
+ case WRITE_I2C:
+ case STREAMING_CTRL:
+ requesttype = (USB_TYPE_VENDOR | USB_DIR_OUT);
+ request = req->cmd;
+ break;
+ case READ_I2C:
+ requesttype = (USB_TYPE_VENDOR | USB_DIR_IN);
+ request = req->cmd;
+ break;
+ case GET_CONFIG:
+ requesttype = (USB_TYPE_VENDOR | USB_DIR_IN);
+ request = CONFIG;
+ break;
+ case SET_CONFIG:
+ requesttype = (USB_TYPE_VENDOR | USB_DIR_OUT);
+ request = CONFIG;
+ break;
+ case WRITE_DEMOD:
+ requesttype = (USB_TYPE_VENDOR | USB_DIR_OUT);
+ request = DEMOD_RW;
+ break;
+ case READ_DEMOD:
+ requesttype = (USB_TYPE_VENDOR | USB_DIR_IN);
+ request = DEMOD_RW;
+ break;
+ default:
+ dev_err(&d->udev->dev, "%s: unknown command=%02x\n",
+ KBUILD_MODNAME, req->cmd);
+ ret = -EINVAL;
+ goto error;
+ }
+
+ buf = kmalloc(req->size, GFP_KERNEL);
+ if (!buf) {
+ ret = -ENOMEM;
+ goto error;
+ }
+
+ if (requesttype == (USB_TYPE_VENDOR | USB_DIR_OUT)) {
+ /* write */
+ memcpy(buf, req->data, req->size);
+ pipe = usb_sndctrlpipe(d->udev, 0);
+ } else {
+ /* read */
+ pipe = usb_rcvctrlpipe(d->udev, 0);
+ }
+
+ msleep(1); /* avoid I2C errors */
+
+ ret = usb_control_msg(d->udev, pipe, request, requesttype, req->value,
+ req->index, buf, req->size, EC168_USB_TIMEOUT);
+
+ dvb_usb_dbg_usb_control_msg(d->udev, request, requesttype, req->value,
+ req->index, buf, req->size);
+
+ if (ret < 0)
+ goto err_dealloc;
+ else
+ ret = 0;
+
+ /* read request, copy returned data to return buf */
+ if (!ret && requesttype == (USB_TYPE_VENDOR | USB_DIR_IN))
+ memcpy(req->data, buf, req->size);
+
+ kfree(buf);
+ return ret;
+
+err_dealloc:
+ kfree(buf);
+error:
+ dev_dbg(&d->udev->dev, "%s: failed=%d\n", __func__, ret);
+ return ret;
+}
+
+/* I2C */
+static struct ec100_config ec168_ec100_config;
+
+static int ec168_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msg[],
+ int num)
+{
+ struct dvb_usb_device *d = i2c_get_adapdata(adap);
+ struct ec168_req req;
+ int i = 0;
+ int ret;
+
+ if (num > 2)
+ return -EINVAL;
+
+ if (mutex_lock_interruptible(&d->i2c_mutex) < 0)
+ return -EAGAIN;
+
+ while (i < num) {
+ if (num > i + 1 && (msg[i+1].flags & I2C_M_RD)) {
+ if (msg[i].addr == ec168_ec100_config.demod_address) {
+ req.cmd = READ_DEMOD;
+ req.value = 0;
+ req.index = 0xff00 + msg[i].buf[0]; /* reg */
+ req.size = msg[i+1].len; /* bytes to read */
+ req.data = &msg[i+1].buf[0];
+ ret = ec168_ctrl_msg(d, &req);
+ i += 2;
+ } else {
+ dev_err(&d->udev->dev, "%s: I2C read not " \
+ "implemented\n",
+ KBUILD_MODNAME);
+ ret = -EOPNOTSUPP;
+ i += 2;
+ }
+ } else {
+ if (msg[i].addr == ec168_ec100_config.demod_address) {
+ req.cmd = WRITE_DEMOD;
+ req.value = msg[i].buf[1]; /* val */
+ req.index = 0xff00 + msg[i].buf[0]; /* reg */
+ req.size = 0;
+ req.data = NULL;
+ ret = ec168_ctrl_msg(d, &req);
+ i += 1;
+ } else {
+ req.cmd = WRITE_I2C;
+ req.value = msg[i].buf[0]; /* val */
+ req.index = 0x0100 + msg[i].addr; /* I2C addr */
+ req.size = msg[i].len-1;
+ req.data = &msg[i].buf[1];
+ ret = ec168_ctrl_msg(d, &req);
+ i += 1;
+ }
+ }
+ if (ret)
+ goto error;
+
+ }
+ ret = i;
+
+error:
+ mutex_unlock(&d->i2c_mutex);
+ return ret;
+}
+
+static u32 ec168_i2c_func(struct i2c_adapter *adapter)
+{
+ return I2C_FUNC_I2C;
+}
+
+static struct i2c_algorithm ec168_i2c_algo = {
+ .master_xfer = ec168_i2c_xfer,
+ .functionality = ec168_i2c_func,
+};
+
+/* Callbacks for DVB USB */
+static int ec168_identify_state(struct dvb_usb_device *d, const char **name)
+{
+ int ret;
+ u8 reply;
+ struct ec168_req req = {GET_CONFIG, 0, 1, sizeof(reply), &reply};
+ dev_dbg(&d->udev->dev, "%s:\n", __func__);
+
+ ret = ec168_ctrl_msg(d, &req);
+ if (ret)
+ goto error;
+
+ dev_dbg(&d->udev->dev, "%s: reply=%02x\n", __func__, reply);
+
+ if (reply == 0x01)
+ ret = WARM;
+ else
+ ret = COLD;
+
+ return ret;
+error:
+ dev_dbg(&d->udev->dev, "%s: failed=%d\n", __func__, ret);
+ return ret;
+}
+
+static int ec168_download_firmware(struct dvb_usb_device *d,
+ const struct firmware *fw)
+{
+ int ret, len, remaining;
+ struct ec168_req req = {DOWNLOAD_FIRMWARE, 0, 0, 0, NULL};
+ dev_dbg(&d->udev->dev, "%s:\n", __func__);
+
+ #define LEN_MAX 2048 /* max packet size */
+ for (remaining = fw->size; remaining > 0; remaining -= LEN_MAX) {
+ len = remaining;
+ if (len > LEN_MAX)
+ len = LEN_MAX;
+
+ req.size = len;
+ req.data = (u8 *) &fw->data[fw->size - remaining];
+ req.index = fw->size - remaining;
+
+ ret = ec168_ctrl_msg(d, &req);
+ if (ret) {
+ dev_err(&d->udev->dev,
+ "%s: firmware download failed=%d\n",
+ KBUILD_MODNAME, ret);
+ goto error;
+ }
+ }
+
+ req.size = 0;
+
+ /* set "warm"? */
+ req.cmd = SET_CONFIG;
+ req.value = 0;
+ req.index = 0x0001;
+ ret = ec168_ctrl_msg(d, &req);
+ if (ret)
+ goto error;
+
+ /* really needed - no idea what does */
+ req.cmd = GPIO;
+ req.value = 0;
+ req.index = 0x0206;
+ ret = ec168_ctrl_msg(d, &req);
+ if (ret)
+ goto error;
+
+ /* activate tuner I2C? */
+ req.cmd = WRITE_I2C;
+ req.value = 0;
+ req.index = 0x00c6;
+ ret = ec168_ctrl_msg(d, &req);
+ if (ret)
+ goto error;
+
+ return ret;
+error:
+ dev_dbg(&d->udev->dev, "%s: failed=%d\n", __func__, ret);
+ return ret;
+}
+
+static struct ec100_config ec168_ec100_config = {
+ .demod_address = 0xff, /* not real address, demod is integrated */
+};
+
+static int ec168_ec100_frontend_attach(struct dvb_usb_adapter *adap)
+{
+ struct dvb_usb_device *d = adap_to_d(adap);
+ dev_dbg(&d->udev->dev, "%s:\n", __func__);
+
+ adap->fe[0] = dvb_attach(ec100_attach, &ec168_ec100_config,
+ &d->i2c_adap);
+ if (adap->fe[0] == NULL)
+ return -ENODEV;
+
+ return 0;
+}
+
+static struct mxl5005s_config ec168_mxl5003s_config = {
+ .i2c_address = 0xc6,
+ .if_freq = IF_FREQ_4570000HZ,
+ .xtal_freq = CRYSTAL_FREQ_16000000HZ,
+ .agc_mode = MXL_SINGLE_AGC,
+ .tracking_filter = MXL_TF_OFF,
+ .rssi_enable = MXL_RSSI_ENABLE,
+ .cap_select = MXL_CAP_SEL_ENABLE,
+ .div_out = MXL_DIV_OUT_4,
+ .clock_out = MXL_CLOCK_OUT_DISABLE,
+ .output_load = MXL5005S_IF_OUTPUT_LOAD_200_OHM,
+ .top = MXL5005S_TOP_25P2,
+ .mod_mode = MXL_DIGITAL_MODE,
+ .if_mode = MXL_ZERO_IF,
+ .AgcMasterByte = 0x00,
+};
+
+static int ec168_mxl5003s_tuner_attach(struct dvb_usb_adapter *adap)
+{
+ struct dvb_usb_device *d = adap_to_d(adap);
+ dev_dbg(&d->udev->dev, "%s:\n", __func__);
+
+ return dvb_attach(mxl5005s_attach, adap->fe[0], &d->i2c_adap,
+ &ec168_mxl5003s_config) == NULL ? -ENODEV : 0;
+}
+
+static int ec168_streaming_ctrl(struct dvb_frontend *fe, int onoff)
+{
+ struct dvb_usb_device *d = fe_to_d(fe);
+ struct ec168_req req = {STREAMING_CTRL, 0x7f01, 0x0202, 0, NULL};
+ dev_dbg(&d->udev->dev, "%s: onoff=%d\n", __func__, onoff);
+
+ if (onoff)
+ req.index = 0x0102;
+ return ec168_ctrl_msg(d, &req);
+}
+
+/* DVB USB Driver stuff */
+/* bInterfaceNumber 0 is HID
+ * bInterfaceNumber 1 is DVB-T */
+static struct dvb_usb_device_properties ec168_props = {
+ .driver_name = KBUILD_MODNAME,
+ .owner = THIS_MODULE,
+ .adapter_nr = adapter_nr,
+ .bInterfaceNumber = 1,
+
+ .identify_state = ec168_identify_state,
+ .firmware = EC168_FIRMWARE,
+ .download_firmware = ec168_download_firmware,
+
+ .i2c_algo = &ec168_i2c_algo,
+ .frontend_attach = ec168_ec100_frontend_attach,
+ .tuner_attach = ec168_mxl5003s_tuner_attach,
+ .streaming_ctrl = ec168_streaming_ctrl,
+
+ .num_adapters = 1,
+ .adapter = {
+ {
+ .stream = DVB_USB_STREAM_BULK(0x82, 6, 32 * 512),
+ }
+ },
+};
+
+static const struct dvb_usb_driver_info ec168_driver_info = {
+ .name = "E3C EC168 reference design",
+ .props = &ec168_props,
+};
+
+static const struct usb_device_id ec168_id[] = {
+ { USB_DEVICE(USB_VID_E3C, USB_PID_E3C_EC168),
+ .driver_info = (kernel_ulong_t) &ec168_driver_info },
+ { USB_DEVICE(USB_VID_E3C, USB_PID_E3C_EC168_2),
+ .driver_info = (kernel_ulong_t) &ec168_driver_info },
+ { USB_DEVICE(USB_VID_E3C, USB_PID_E3C_EC168_3),
+ .driver_info = (kernel_ulong_t) &ec168_driver_info },
+ { USB_DEVICE(USB_VID_E3C, USB_PID_E3C_EC168_4),
+ .driver_info = (kernel_ulong_t) &ec168_driver_info },
+ { USB_DEVICE(USB_VID_E3C, USB_PID_E3C_EC168_5),
+ .driver_info = (kernel_ulong_t) &ec168_driver_info },
+ {}
+};
+MODULE_DEVICE_TABLE(usb, ec168_id);
+
+static struct usb_driver ec168_driver = {
+ .name = KBUILD_MODNAME,
+ .id_table = ec168_id,
+ .probe = dvb_usbv2_probe,
+ .disconnect = dvb_usbv2_disconnect,
+ .suspend = dvb_usbv2_suspend,
+ .resume = dvb_usbv2_resume,
+ .no_dynamic_id = 1,
+ .soft_unbind = 1,
+};
+
+module_usb_driver(ec168_driver);
+
+MODULE_AUTHOR("Antti Palosaari <crope@iki.fi>");
+MODULE_DESCRIPTION("E3C EC168 driver");
+MODULE_LICENSE("GPL");
+MODULE_FIRMWARE(EC168_FIRMWARE);
diff --git a/kernel/drivers/media/usb/dvb-usb-v2/ec168.h b/kernel/drivers/media/usb/dvb-usb-v2/ec168.h
new file mode 100644
index 000000000..615a65694
--- /dev/null
+++ b/kernel/drivers/media/usb/dvb-usb-v2/ec168.h
@@ -0,0 +1,53 @@
+/*
+ * E3C EC168 DVB USB driver
+ *
+ * Copyright (C) 2009 Antti Palosaari <crope@iki.fi>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+
+#ifndef EC168_H
+#define EC168_H
+
+#include "dvb_usb.h"
+
+#define EC168_USB_TIMEOUT 1000
+#define EC168_FIRMWARE "dvb-usb-ec168.fw"
+
+struct ec168_req {
+ u8 cmd; /* [1] */
+ u16 value; /* [2|3] */
+ u16 index; /* [4|5] */
+ u16 size; /* [6|7] */
+ u8 *data;
+};
+
+enum ec168_cmd {
+ DOWNLOAD_FIRMWARE = 0x00,
+ CONFIG = 0x01,
+ DEMOD_RW = 0x03,
+ GPIO = 0x04,
+ STREAMING_CTRL = 0x10,
+ READ_I2C = 0x20,
+ WRITE_I2C = 0x21,
+ HID_DOWNLOAD = 0x30,
+ GET_CONFIG,
+ SET_CONFIG,
+ READ_DEMOD,
+ WRITE_DEMOD,
+};
+
+#endif
diff --git a/kernel/drivers/media/usb/dvb-usb-v2/gl861.c b/kernel/drivers/media/usb/dvb-usb-v2/gl861.c
new file mode 100644
index 000000000..b1b09c547
--- /dev/null
+++ b/kernel/drivers/media/usb/dvb-usb-v2/gl861.c
@@ -0,0 +1,177 @@
+/* DVB USB compliant linux driver for GL861 USB2.0 devices.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation, version 2.
+ *
+ * see Documentation/dvb/README.dvb-usb for more information
+ */
+#include "gl861.h"
+
+#include "zl10353.h"
+#include "qt1010.h"
+
+DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
+
+static int gl861_i2c_msg(struct dvb_usb_device *d, u8 addr,
+ u8 *wbuf, u16 wlen, u8 *rbuf, u16 rlen)
+{
+ u16 index;
+ u16 value = addr << (8 + 1);
+ int wo = (rbuf == NULL || rlen == 0); /* write-only */
+ u8 req, type;
+
+ if (wo) {
+ req = GL861_REQ_I2C_WRITE;
+ type = GL861_WRITE;
+ } else { /* rw */
+ req = GL861_REQ_I2C_READ;
+ type = GL861_READ;
+ }
+
+ switch (wlen) {
+ case 1:
+ index = wbuf[0];
+ break;
+ case 2:
+ index = wbuf[0];
+ value = value + wbuf[1];
+ break;
+ default:
+ dev_err(&d->udev->dev, "%s: wlen=%d, aborting\n",
+ KBUILD_MODNAME, wlen);
+ return -EINVAL;
+ }
+
+ msleep(1); /* avoid I2C errors */
+
+ return usb_control_msg(d->udev, usb_rcvctrlpipe(d->udev, 0), req, type,
+ value, index, rbuf, rlen, 2000);
+}
+
+/* I2C */
+static int gl861_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msg[],
+ int num)
+{
+ struct dvb_usb_device *d = i2c_get_adapdata(adap);
+ int i;
+
+ if (num > 2)
+ return -EINVAL;
+
+ if (mutex_lock_interruptible(&d->i2c_mutex) < 0)
+ return -EAGAIN;
+
+ for (i = 0; i < num; i++) {
+ /* write/read request */
+ if (i+1 < num && (msg[i+1].flags & I2C_M_RD)) {
+ if (gl861_i2c_msg(d, msg[i].addr, msg[i].buf,
+ msg[i].len, msg[i+1].buf, msg[i+1].len) < 0)
+ break;
+ i++;
+ } else
+ if (gl861_i2c_msg(d, msg[i].addr, msg[i].buf,
+ msg[i].len, NULL, 0) < 0)
+ break;
+ }
+
+ mutex_unlock(&d->i2c_mutex);
+ return i;
+}
+
+static u32 gl861_i2c_func(struct i2c_adapter *adapter)
+{
+ return I2C_FUNC_I2C;
+}
+
+static struct i2c_algorithm gl861_i2c_algo = {
+ .master_xfer = gl861_i2c_xfer,
+ .functionality = gl861_i2c_func,
+};
+
+/* Callbacks for DVB USB */
+static struct zl10353_config gl861_zl10353_config = {
+ .demod_address = 0x0f,
+ .no_tuner = 1,
+ .parallel_ts = 1,
+};
+
+static int gl861_frontend_attach(struct dvb_usb_adapter *adap)
+{
+
+ adap->fe[0] = dvb_attach(zl10353_attach, &gl861_zl10353_config,
+ &adap_to_d(adap)->i2c_adap);
+ if (adap->fe[0] == NULL)
+ return -EIO;
+
+ return 0;
+}
+
+static struct qt1010_config gl861_qt1010_config = {
+ .i2c_address = 0x62
+};
+
+static int gl861_tuner_attach(struct dvb_usb_adapter *adap)
+{
+ return dvb_attach(qt1010_attach,
+ adap->fe[0], &adap_to_d(adap)->i2c_adap,
+ &gl861_qt1010_config) == NULL ? -ENODEV : 0;
+}
+
+static int gl861_init(struct dvb_usb_device *d)
+{
+ /*
+ * There is 2 interfaces. Interface 0 is for TV and interface 1 is
+ * for HID remote controller. Interface 0 has 2 alternate settings.
+ * For some reason we need to set interface explicitly, defaulted
+ * as alternate setting 1?
+ */
+ return usb_set_interface(d->udev, 0, 0);
+}
+
+/* DVB USB Driver stuff */
+static struct dvb_usb_device_properties gl861_props = {
+ .driver_name = KBUILD_MODNAME,
+ .owner = THIS_MODULE,
+ .adapter_nr = adapter_nr,
+
+ .i2c_algo = &gl861_i2c_algo,
+ .frontend_attach = gl861_frontend_attach,
+ .tuner_attach = gl861_tuner_attach,
+ .init = gl861_init,
+
+ .num_adapters = 1,
+ .adapter = {
+ {
+ .stream = DVB_USB_STREAM_BULK(0x81, 7, 512),
+ }
+ }
+};
+
+static const struct usb_device_id gl861_id_table[] = {
+ { DVB_USB_DEVICE(USB_VID_MSI, USB_PID_MSI_MEGASKY580_55801,
+ &gl861_props, "MSI Mega Sky 55801 DVB-T USB2.0", NULL) },
+ { DVB_USB_DEVICE(USB_VID_ALINK, USB_VID_ALINK_DTU,
+ &gl861_props, "A-LINK DTU DVB-T USB2.0", NULL) },
+ { }
+};
+MODULE_DEVICE_TABLE(usb, gl861_id_table);
+
+static struct usb_driver gl861_usb_driver = {
+ .name = KBUILD_MODNAME,
+ .id_table = gl861_id_table,
+ .probe = dvb_usbv2_probe,
+ .disconnect = dvb_usbv2_disconnect,
+ .suspend = dvb_usbv2_suspend,
+ .resume = dvb_usbv2_resume,
+ .reset_resume = dvb_usbv2_reset_resume,
+ .no_dynamic_id = 1,
+ .soft_unbind = 1,
+};
+
+module_usb_driver(gl861_usb_driver);
+
+MODULE_AUTHOR("Carl Lundqvist <comabug@gmail.com>");
+MODULE_DESCRIPTION("Driver MSI Mega Sky 580 DVB-T USB2.0 / GL861");
+MODULE_VERSION("0.1");
+MODULE_LICENSE("GPL");
diff --git a/kernel/drivers/media/usb/dvb-usb-v2/gl861.h b/kernel/drivers/media/usb/dvb-usb-v2/gl861.h
new file mode 100644
index 000000000..b0b80d87b
--- /dev/null
+++ b/kernel/drivers/media/usb/dvb-usb-v2/gl861.h
@@ -0,0 +1,12 @@
+#ifndef _DVB_USB_GL861_H_
+#define _DVB_USB_GL861_H_
+
+#include "dvb_usb.h"
+
+#define GL861_WRITE 0x40
+#define GL861_READ 0xc0
+
+#define GL861_REQ_I2C_WRITE 0x01
+#define GL861_REQ_I2C_READ 0x02
+
+#endif
diff --git a/kernel/drivers/media/usb/dvb-usb-v2/lmedm04.c b/kernel/drivers/media/usb/dvb-usb-v2/lmedm04.c
new file mode 100644
index 000000000..5de6f7c04
--- /dev/null
+++ b/kernel/drivers/media/usb/dvb-usb-v2/lmedm04.c
@@ -0,0 +1,1307 @@
+/* DVB USB compliant linux driver for
+ *
+ * DM04/QQBOX DVB-S USB BOX LME2510C + SHARP:BS2F7HZ7395
+ * LME2510C + LG TDQY-P001F
+ * LME2510C + BS2F7HZ0194
+ * LME2510 + LG TDQY-P001F
+ * LME2510 + BS2F7HZ0194
+ *
+ * MVB7395 (LME2510C+SHARP:BS2F7HZ7395)
+ * SHARP:BS2F7HZ7395 = (STV0288+Sharp IX2505V)
+ *
+ * MV001F (LME2510+LGTDQY-P001F)
+ * LG TDQY - P001F =(TDA8263 + TDA10086H)
+ *
+ * MVB0001F (LME2510C+LGTDQT-P001F)
+ *
+ * MV0194 (LME2510+SHARP:BS2F7HZ0194)
+ * SHARP:BS2F7HZ0194 = (STV0299+IX2410)
+ *
+ * MVB0194 (LME2510C+SHARP0194)
+ *
+ * LME2510C + M88RS2000
+ *
+ * For firmware see Documentation/dvb/lmedm04.txt
+ *
+ * I2C addresses:
+ * 0xd0 - STV0288 - Demodulator
+ * 0xc0 - Sharp IX2505V - Tuner
+ * --
+ * 0x1c - TDA10086 - Demodulator
+ * 0xc0 - TDA8263 - Tuner
+ * --
+ * 0xd0 - STV0299 - Demodulator
+ * 0xc0 - IX2410 - Tuner
+ *
+ *
+ * VID = 3344 PID LME2510=1122 LME2510C=1120
+ *
+ * Copyright (C) 2010 Malcolm Priestley (tvboxspy@gmail.com)
+ * LME2510(C)(C) Leaguerme (Shenzhen) MicroElectronics Co., Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License Version 2, as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ *
+ * see Documentation/dvb/README.dvb-usb for more information
+ *
+ * Known Issues :
+ * LME2510: Non Intel USB chipsets fail to maintain High Speed on
+ * Boot or Hot Plug.
+ *
+ * QQbox suffers from noise on LNB voltage.
+ *
+ * LME2510: SHARP:BS2F7HZ0194(MV0194) cannot cold reset and share system
+ * with other tuners. After a cold reset streaming will not start.
+ *
+ * M88RS2000 suffers from loss of lock.
+ */
+#define DVB_USB_LOG_PREFIX "LME2510(C)"
+#include <linux/usb.h>
+#include <linux/usb/input.h>
+#include <media/rc-core.h>
+
+#include "dvb_usb.h"
+#include "lmedm04.h"
+#include "tda826x.h"
+#include "tda10086.h"
+#include "stv0288.h"
+#include "ix2505v.h"
+#include "stv0299.h"
+#include "dvb-pll.h"
+#include "z0194a.h"
+#include "m88rs2000.h"
+#include "ts2020.h"
+
+
+#define LME2510_C_S7395 "dvb-usb-lme2510c-s7395.fw";
+#define LME2510_C_LG "dvb-usb-lme2510c-lg.fw";
+#define LME2510_C_S0194 "dvb-usb-lme2510c-s0194.fw";
+#define LME2510_C_RS2000 "dvb-usb-lme2510c-rs2000.fw";
+#define LME2510_LG "dvb-usb-lme2510-lg.fw";
+#define LME2510_S0194 "dvb-usb-lme2510-s0194.fw";
+
+/* debug */
+static int dvb_usb_lme2510_debug;
+#define lme_debug(var, level, args...) do { \
+ if ((var >= level)) \
+ pr_debug(DVB_USB_LOG_PREFIX": " args); \
+} while (0)
+#define deb_info(level, args...) lme_debug(dvb_usb_lme2510_debug, level, args)
+#define debug_data_snipet(level, name, p) \
+ deb_info(level, name" (%02x%02x%02x%02x%02x%02x%02x%02x)", \
+ *p, *(p+1), *(p+2), *(p+3), *(p+4), \
+ *(p+5), *(p+6), *(p+7));
+#define info(args...) pr_info(DVB_USB_LOG_PREFIX": "args)
+
+module_param_named(debug, dvb_usb_lme2510_debug, int, 0644);
+MODULE_PARM_DESC(debug, "set debugging level (1=info (or-able)).");
+
+static int dvb_usb_lme2510_firmware;
+module_param_named(firmware, dvb_usb_lme2510_firmware, int, 0644);
+MODULE_PARM_DESC(firmware, "set default firmware 0=Sharp7395 1=LG");
+
+static int pid_filter;
+module_param_named(pid, pid_filter, int, 0644);
+MODULE_PARM_DESC(pid, "set default 0=default 1=off 2=on");
+
+
+DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
+
+#define TUNER_DEFAULT 0x0
+#define TUNER_LG 0x1
+#define TUNER_S7395 0x2
+#define TUNER_S0194 0x3
+#define TUNER_RS2000 0x4
+
+struct lme2510_state {
+ unsigned long int_urb_due;
+ fe_status_t lock_status;
+ u8 id;
+ u8 tuner_config;
+ u8 signal_level;
+ u8 signal_sn;
+ u8 time_key;
+ u8 i2c_talk_onoff;
+ u8 i2c_gate;
+ u8 i2c_tuner_gate_w;
+ u8 i2c_tuner_gate_r;
+ u8 i2c_tuner_addr;
+ u8 stream_on;
+ u8 pid_size;
+ u8 pid_off;
+ void *buffer;
+ struct urb *lme_urb;
+ void *usb_buffer;
+ /* Frontend original calls */
+ int (*fe_read_status)(struct dvb_frontend *, fe_status_t *);
+ int (*fe_read_signal_strength)(struct dvb_frontend *, u16 *);
+ int (*fe_read_snr)(struct dvb_frontend *, u16 *);
+ int (*fe_read_ber)(struct dvb_frontend *, u32 *);
+ int (*fe_read_ucblocks)(struct dvb_frontend *, u32 *);
+ int (*fe_set_voltage)(struct dvb_frontend *, fe_sec_voltage_t);
+ u8 dvb_usb_lme2510_firmware;
+};
+
+static int lme2510_bulk_write(struct usb_device *dev,
+ u8 *snd, int len, u8 pipe)
+{
+ int ret, actual_l;
+
+ ret = usb_bulk_msg(dev, usb_sndbulkpipe(dev, pipe),
+ snd, len , &actual_l, 100);
+ return ret;
+}
+
+static int lme2510_bulk_read(struct usb_device *dev,
+ u8 *rev, int len, u8 pipe)
+{
+ int ret, actual_l;
+
+ ret = usb_bulk_msg(dev, usb_rcvbulkpipe(dev, pipe),
+ rev, len , &actual_l, 200);
+ return ret;
+}
+
+static int lme2510_usb_talk(struct dvb_usb_device *d,
+ u8 *wbuf, int wlen, u8 *rbuf, int rlen)
+{
+ struct lme2510_state *st = d->priv;
+ u8 *buff;
+ int ret = 0;
+
+ if (st->usb_buffer == NULL) {
+ st->usb_buffer = kmalloc(64, GFP_KERNEL);
+ if (st->usb_buffer == NULL) {
+ info("MEM Error no memory");
+ return -ENOMEM;
+ }
+ }
+ buff = st->usb_buffer;
+
+ ret = mutex_lock_interruptible(&d->usb_mutex);
+
+ if (ret < 0)
+ return -EAGAIN;
+
+ /* the read/write capped at 64 */
+ memcpy(buff, wbuf, (wlen < 64) ? wlen : 64);
+
+ ret |= lme2510_bulk_write(d->udev, buff, wlen , 0x01);
+
+ ret |= lme2510_bulk_read(d->udev, buff, (rlen < 64) ?
+ rlen : 64 , 0x01);
+
+ if (rlen > 0)
+ memcpy(rbuf, buff, rlen);
+
+ mutex_unlock(&d->usb_mutex);
+
+ return (ret < 0) ? -ENODEV : 0;
+}
+
+static int lme2510_stream_restart(struct dvb_usb_device *d)
+{
+ struct lme2510_state *st = d->priv;
+ u8 all_pids[] = LME_ALL_PIDS;
+ u8 stream_on[] = LME_ST_ON_W;
+ int ret;
+ u8 rbuff[1];
+ if (st->pid_off)
+ ret = lme2510_usb_talk(d, all_pids, sizeof(all_pids),
+ rbuff, sizeof(rbuff));
+ /*Restart Stream Command*/
+ ret = lme2510_usb_talk(d, stream_on, sizeof(stream_on),
+ rbuff, sizeof(rbuff));
+ return ret;
+}
+
+static int lme2510_enable_pid(struct dvb_usb_device *d, u8 index, u16 pid_out)
+{
+ struct lme2510_state *st = d->priv;
+ static u8 pid_buff[] = LME_ZERO_PID;
+ static u8 rbuf[1];
+ u8 pid_no = index * 2;
+ u8 pid_len = pid_no + 2;
+ int ret = 0;
+ deb_info(1, "PID Setting Pid %04x", pid_out);
+
+ if (st->pid_size == 0)
+ ret |= lme2510_stream_restart(d);
+
+ pid_buff[2] = pid_no;
+ pid_buff[3] = (u8)pid_out & 0xff;
+ pid_buff[4] = pid_no + 1;
+ pid_buff[5] = (u8)(pid_out >> 8);
+
+ if (pid_len > st->pid_size)
+ st->pid_size = pid_len;
+ pid_buff[7] = 0x80 + st->pid_size;
+
+ ret |= lme2510_usb_talk(d, pid_buff ,
+ sizeof(pid_buff) , rbuf, sizeof(rbuf));
+
+ if (st->stream_on)
+ ret |= lme2510_stream_restart(d);
+
+ return ret;
+}
+
+static void lme2510_int_response(struct urb *lme_urb)
+{
+ struct dvb_usb_adapter *adap = lme_urb->context;
+ struct lme2510_state *st = adap_to_priv(adap);
+ static u8 *ibuf, *rbuf;
+ int i = 0, offset;
+ u32 key;
+ u8 signal_lock = 0;
+
+ switch (lme_urb->status) {
+ case 0:
+ case -ETIMEDOUT:
+ break;
+ case -ECONNRESET:
+ case -ENOENT:
+ case -ESHUTDOWN:
+ return;
+ default:
+ info("Error %x", lme_urb->status);
+ break;
+ }
+
+ rbuf = (u8 *) lme_urb->transfer_buffer;
+
+ offset = ((lme_urb->actual_length/8) > 4)
+ ? 4 : (lme_urb->actual_length/8) ;
+
+ for (i = 0; i < offset; ++i) {
+ ibuf = (u8 *)&rbuf[i*8];
+ deb_info(5, "INT O/S C =%02x C/O=%02x Type =%02x%02x",
+ offset, i, ibuf[0], ibuf[1]);
+
+ switch (ibuf[0]) {
+ case 0xaa:
+ debug_data_snipet(1, "INT Remote data snipet", ibuf);
+ if ((ibuf[4] + ibuf[5]) == 0xff) {
+ key = RC_SCANCODE_NECX((ibuf[2] ^ 0xff) << 8 |
+ (ibuf[3] > 0) ? (ibuf[3] ^ 0xff) : 0,
+ ibuf[5]);
+ deb_info(1, "INT Key =%08x", key);
+ if (adap_to_d(adap)->rc_dev != NULL)
+ rc_keydown(adap_to_d(adap)->rc_dev,
+ RC_TYPE_NEC, key, 0);
+ }
+ break;
+ case 0xbb:
+ switch (st->tuner_config) {
+ case TUNER_LG:
+ signal_lock = ibuf[2] & BIT(5);
+ st->signal_level = ibuf[4];
+ st->signal_sn = ibuf[3];
+ st->time_key = ibuf[7];
+ break;
+ case TUNER_S7395:
+ case TUNER_S0194:
+ /* Tweak for earlier firmware*/
+ if (ibuf[1] == 0x03) {
+ signal_lock = ibuf[2] & BIT(4);
+ st->signal_level = ibuf[3];
+ st->signal_sn = ibuf[4];
+ } else {
+ st->signal_level = ibuf[4];
+ st->signal_sn = ibuf[5];
+ }
+ break;
+ case TUNER_RS2000:
+ signal_lock = ibuf[2] & 0xee;
+ st->signal_level = ibuf[5];
+ st->signal_sn = ibuf[4];
+ st->time_key = ibuf[7];
+ default:
+ break;
+ }
+
+ /* Interrupt will also throw just BIT 0 as lock */
+ signal_lock |= ibuf[2] & BIT(0);
+
+ if (!signal_lock)
+ st->lock_status &= ~FE_HAS_LOCK;
+
+ debug_data_snipet(5, "INT Remote data snipet in", ibuf);
+ break;
+ case 0xcc:
+ debug_data_snipet(1, "INT Control data snipet", ibuf);
+ break;
+ default:
+ debug_data_snipet(1, "INT Unknown data snipet", ibuf);
+ break;
+ }
+ }
+
+ usb_submit_urb(lme_urb, GFP_ATOMIC);
+
+ /* Interrupt urb is due every 48 msecs while streaming the buffer
+ * stores up to 4 periods if missed. Allow 200 msec for next interrupt.
+ */
+ st->int_urb_due = jiffies + msecs_to_jiffies(200);
+}
+
+static int lme2510_int_read(struct dvb_usb_adapter *adap)
+{
+ struct dvb_usb_device *d = adap_to_d(adap);
+ struct lme2510_state *lme_int = adap_to_priv(adap);
+ struct usb_host_endpoint *ep;
+
+ lme_int->lme_urb = usb_alloc_urb(0, GFP_ATOMIC);
+
+ if (lme_int->lme_urb == NULL)
+ return -ENOMEM;
+
+ lme_int->buffer = usb_alloc_coherent(d->udev, 128, GFP_ATOMIC,
+ &lme_int->lme_urb->transfer_dma);
+
+ if (lme_int->buffer == NULL)
+ return -ENOMEM;
+
+ usb_fill_int_urb(lme_int->lme_urb,
+ d->udev,
+ usb_rcvintpipe(d->udev, 0xa),
+ lme_int->buffer,
+ 128,
+ lme2510_int_response,
+ adap,
+ 8);
+
+ /* Quirk of pipe reporting PIPE_BULK but behaves as interrupt */
+ ep = usb_pipe_endpoint(d->udev, lme_int->lme_urb->pipe);
+
+ if (usb_endpoint_type(&ep->desc) == USB_ENDPOINT_XFER_BULK)
+ lme_int->lme_urb->pipe = usb_rcvbulkpipe(d->udev, 0xa),
+
+ lme_int->lme_urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
+
+ usb_submit_urb(lme_int->lme_urb, GFP_ATOMIC);
+ info("INT Interrupt Service Started");
+
+ return 0;
+}
+
+static int lme2510_pid_filter_ctrl(struct dvb_usb_adapter *adap, int onoff)
+{
+ struct dvb_usb_device *d = adap_to_d(adap);
+ struct lme2510_state *st = adap_to_priv(adap);
+ static u8 clear_pid_reg[] = LME_ALL_PIDS;
+ static u8 rbuf[1];
+ int ret = 0;
+
+ deb_info(1, "PID Clearing Filter");
+
+ mutex_lock(&d->i2c_mutex);
+
+ if (!onoff) {
+ ret |= lme2510_usb_talk(d, clear_pid_reg,
+ sizeof(clear_pid_reg), rbuf, sizeof(rbuf));
+ st->pid_off = true;
+ } else
+ st->pid_off = false;
+
+ st->pid_size = 0;
+
+ mutex_unlock(&d->i2c_mutex);
+
+ return 0;
+}
+
+static int lme2510_pid_filter(struct dvb_usb_adapter *adap, int index, u16 pid,
+ int onoff)
+{
+ struct dvb_usb_device *d = adap_to_d(adap);
+ int ret = 0;
+
+ deb_info(3, "%s PID=%04x Index=%04x onoff=%02x", __func__,
+ pid, index, onoff);
+
+ if (onoff) {
+ mutex_lock(&d->i2c_mutex);
+ ret |= lme2510_enable_pid(d, index, pid);
+ mutex_unlock(&d->i2c_mutex);
+ }
+
+
+ return ret;
+}
+
+
+static int lme2510_return_status(struct dvb_usb_device *d)
+{
+ int ret = 0;
+ u8 *data;
+
+ data = kzalloc(10, GFP_KERNEL);
+ if (!data)
+ return -ENOMEM;
+
+ ret |= usb_control_msg(d->udev, usb_rcvctrlpipe(d->udev, 0),
+ 0x06, 0x80, 0x0302, 0x00, data, 0x0006, 200);
+ info("Firmware Status: %x (%x)", ret , data[2]);
+
+ ret = (ret < 0) ? -ENODEV : data[2];
+ kfree(data);
+ return ret;
+}
+
+static int lme2510_msg(struct dvb_usb_device *d,
+ u8 *wbuf, int wlen, u8 *rbuf, int rlen)
+{
+ struct lme2510_state *st = d->priv;
+
+ st->i2c_talk_onoff = 1;
+
+ return lme2510_usb_talk(d, wbuf, wlen, rbuf, rlen);
+}
+
+static int lme2510_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msg[],
+ int num)
+{
+ struct dvb_usb_device *d = i2c_get_adapdata(adap);
+ struct lme2510_state *st = d->priv;
+ static u8 obuf[64], ibuf[64];
+ int i, read, read_o;
+ u16 len;
+ u8 gate = st->i2c_gate;
+
+ mutex_lock(&d->i2c_mutex);
+
+ if (gate == 0)
+ gate = 5;
+
+ for (i = 0; i < num; i++) {
+ read_o = msg[i].flags & I2C_M_RD;
+ read = i + 1 < num && msg[i + 1].flags & I2C_M_RD;
+ read |= read_o;
+ gate = (msg[i].addr == st->i2c_tuner_addr)
+ ? (read) ? st->i2c_tuner_gate_r
+ : st->i2c_tuner_gate_w
+ : st->i2c_gate;
+ obuf[0] = gate | (read << 7);
+
+ if (gate == 5)
+ obuf[1] = (read) ? 2 : msg[i].len + 1;
+ else
+ obuf[1] = msg[i].len + read + 1;
+
+ obuf[2] = msg[i].addr << 1;
+
+ if (read) {
+ if (read_o)
+ len = 3;
+ else {
+ memcpy(&obuf[3], msg[i].buf, msg[i].len);
+ obuf[msg[i].len+3] = msg[i+1].len;
+ len = msg[i].len+4;
+ }
+ } else {
+ memcpy(&obuf[3], msg[i].buf, msg[i].len);
+ len = msg[i].len+3;
+ }
+
+ if (lme2510_msg(d, obuf, len, ibuf, 64) < 0) {
+ deb_info(1, "i2c transfer failed.");
+ mutex_unlock(&d->i2c_mutex);
+ return -EAGAIN;
+ }
+
+ if (read) {
+ if (read_o)
+ memcpy(msg[i].buf, &ibuf[1], msg[i].len);
+ else {
+ memcpy(msg[i+1].buf, &ibuf[1], msg[i+1].len);
+ i++;
+ }
+ }
+ }
+
+ mutex_unlock(&d->i2c_mutex);
+ return i;
+}
+
+static u32 lme2510_i2c_func(struct i2c_adapter *adapter)
+{
+ return I2C_FUNC_I2C;
+}
+
+static struct i2c_algorithm lme2510_i2c_algo = {
+ .master_xfer = lme2510_i2c_xfer,
+ .functionality = lme2510_i2c_func,
+};
+
+static int lme2510_streaming_ctrl(struct dvb_frontend *fe, int onoff)
+{
+ struct dvb_usb_adapter *adap = fe_to_adap(fe);
+ struct dvb_usb_device *d = adap_to_d(adap);
+ struct lme2510_state *st = adap_to_priv(adap);
+ static u8 clear_reg_3[] = LME_ALL_PIDS;
+ static u8 rbuf[1];
+ int ret = 0, rlen = sizeof(rbuf);
+
+ deb_info(1, "STM (%02x)", onoff);
+
+ /* Streaming is started by FE_HAS_LOCK */
+ if (onoff == 1)
+ st->stream_on = 1;
+ else {
+ deb_info(1, "STM Steam Off");
+ /* mutex is here only to avoid collision with I2C */
+ mutex_lock(&d->i2c_mutex);
+
+ ret = lme2510_usb_talk(d, clear_reg_3,
+ sizeof(clear_reg_3), rbuf, rlen);
+ st->stream_on = 0;
+ st->i2c_talk_onoff = 1;
+
+ mutex_unlock(&d->i2c_mutex);
+ }
+
+ return (ret < 0) ? -ENODEV : 0;
+}
+
+static u8 check_sum(u8 *p, u8 len)
+{
+ u8 sum = 0;
+ while (len--)
+ sum += *p++;
+ return sum;
+}
+
+static int lme2510_download_firmware(struct dvb_usb_device *d,
+ const struct firmware *fw)
+{
+ int ret = 0;
+ u8 *data;
+ u16 j, wlen, len_in, start, end;
+ u8 packet_size, dlen, i;
+ u8 *fw_data;
+
+ packet_size = 0x31;
+ len_in = 1;
+
+ data = kzalloc(128, GFP_KERNEL);
+ if (!data) {
+ info("FRM Could not start Firmware Download"\
+ "(Buffer allocation failed)");
+ return -ENOMEM;
+ }
+
+ info("FRM Starting Firmware Download");
+
+ for (i = 1; i < 3; i++) {
+ start = (i == 1) ? 0 : 512;
+ end = (i == 1) ? 512 : fw->size;
+ for (j = start; j < end; j += (packet_size+1)) {
+ fw_data = (u8 *)(fw->data + j);
+ if ((end - j) > packet_size) {
+ data[0] = i;
+ dlen = packet_size;
+ } else {
+ data[0] = i | 0x80;
+ dlen = (u8)(end - j)-1;
+ }
+ data[1] = dlen;
+ memcpy(&data[2], fw_data, dlen+1);
+ wlen = (u8) dlen + 4;
+ data[wlen-1] = check_sum(fw_data, dlen+1);
+ deb_info(1, "Data S=%02x:E=%02x CS= %02x", data[3],
+ data[dlen+2], data[dlen+3]);
+ lme2510_usb_talk(d, data, wlen, data, len_in);
+ ret |= (data[0] == 0x88) ? 0 : -1;
+ }
+ }
+
+ data[0] = 0x8a;
+ len_in = 1;
+ msleep(2000);
+ lme2510_usb_talk(d, data, len_in, data, len_in);
+ msleep(400);
+
+ if (ret < 0)
+ info("FRM Firmware Download Failed (%04x)" , ret);
+ else
+ info("FRM Firmware Download Completed - Resetting Device");
+
+ kfree(data);
+ return RECONNECTS_USB;
+}
+
+static void lme_coldreset(struct dvb_usb_device *d)
+{
+ u8 data[1] = {0};
+ data[0] = 0x0a;
+ info("FRM Firmware Cold Reset");
+
+ lme2510_usb_talk(d, data, sizeof(data), data, sizeof(data));
+
+ return;
+}
+
+static const char fw_c_s7395[] = LME2510_C_S7395;
+static const char fw_c_lg[] = LME2510_C_LG;
+static const char fw_c_s0194[] = LME2510_C_S0194;
+static const char fw_c_rs2000[] = LME2510_C_RS2000;
+static const char fw_lg[] = LME2510_LG;
+static const char fw_s0194[] = LME2510_S0194;
+
+static const char *lme_firmware_switch(struct dvb_usb_device *d, int cold)
+{
+ struct lme2510_state *st = d->priv;
+ struct usb_device *udev = d->udev;
+ const struct firmware *fw = NULL;
+ const char *fw_lme;
+ int ret = 0;
+
+ cold = (cold > 0) ? (cold & 1) : 0;
+
+ switch (le16_to_cpu(udev->descriptor.idProduct)) {
+ case 0x1122:
+ switch (st->dvb_usb_lme2510_firmware) {
+ default:
+ case TUNER_S0194:
+ fw_lme = fw_s0194;
+ ret = request_firmware(&fw, fw_lme, &udev->dev);
+ if (ret == 0) {
+ st->dvb_usb_lme2510_firmware = TUNER_S0194;
+ cold = 0;
+ break;
+ }
+ /* fall through */
+ case TUNER_LG:
+ fw_lme = fw_lg;
+ ret = request_firmware(&fw, fw_lme, &udev->dev);
+ if (ret == 0) {
+ st->dvb_usb_lme2510_firmware = TUNER_LG;
+ break;
+ }
+ st->dvb_usb_lme2510_firmware = TUNER_DEFAULT;
+ break;
+ }
+ break;
+ case 0x1120:
+ switch (st->dvb_usb_lme2510_firmware) {
+ default:
+ case TUNER_S7395:
+ fw_lme = fw_c_s7395;
+ ret = request_firmware(&fw, fw_lme, &udev->dev);
+ if (ret == 0) {
+ st->dvb_usb_lme2510_firmware = TUNER_S7395;
+ cold = 0;
+ break;
+ }
+ /* fall through */
+ case TUNER_LG:
+ fw_lme = fw_c_lg;
+ ret = request_firmware(&fw, fw_lme, &udev->dev);
+ if (ret == 0) {
+ st->dvb_usb_lme2510_firmware = TUNER_LG;
+ break;
+ }
+ /* fall through */
+ case TUNER_S0194:
+ fw_lme = fw_c_s0194;
+ ret = request_firmware(&fw, fw_lme, &udev->dev);
+ if (ret == 0) {
+ st->dvb_usb_lme2510_firmware = TUNER_S0194;
+ break;
+ }
+ st->dvb_usb_lme2510_firmware = TUNER_DEFAULT;
+ cold = 0;
+ break;
+ }
+ break;
+ case 0x22f0:
+ fw_lme = fw_c_rs2000;
+ st->dvb_usb_lme2510_firmware = TUNER_RS2000;
+ break;
+ default:
+ fw_lme = fw_c_s7395;
+ }
+
+ release_firmware(fw);
+
+ if (cold) {
+ dvb_usb_lme2510_firmware = st->dvb_usb_lme2510_firmware;
+ info("FRM Changing to %s firmware", fw_lme);
+ lme_coldreset(d);
+ return NULL;
+ }
+
+ return fw_lme;
+}
+
+static int lme2510_kill_urb(struct usb_data_stream *stream)
+{
+ int i;
+
+ for (i = 0; i < stream->urbs_submitted; i++) {
+ deb_info(3, "killing URB no. %d.", i);
+ /* stop the URB */
+ usb_kill_urb(stream->urb_list[i]);
+ }
+ stream->urbs_submitted = 0;
+
+ return 0;
+}
+
+static struct tda10086_config tda10086_config = {
+ .demod_address = 0x0e,
+ .invert = 0,
+ .diseqc_tone = 1,
+ .xtal_freq = TDA10086_XTAL_16M,
+};
+
+static struct stv0288_config lme_config = {
+ .demod_address = 0x68,
+ .min_delay_ms = 15,
+ .inittab = s7395_inittab,
+};
+
+static struct ix2505v_config lme_tuner = {
+ .tuner_address = 0x60,
+ .min_delay_ms = 100,
+ .tuner_gain = 0x0,
+ .tuner_chargepump = 0x3,
+};
+
+static struct stv0299_config sharp_z0194_config = {
+ .demod_address = 0x68,
+ .inittab = sharp_z0194a_inittab,
+ .mclk = 88000000UL,
+ .invert = 0,
+ .skip_reinit = 0,
+ .lock_output = STV0299_LOCKOUTPUT_1,
+ .volt13_op0_op1 = STV0299_VOLT13_OP1,
+ .min_delay_ms = 100,
+ .set_symbol_rate = sharp_z0194a_set_symbol_rate,
+};
+
+static struct m88rs2000_config m88rs2000_config = {
+ .demod_addr = 0x68
+};
+
+static struct ts2020_config ts2020_config = {
+ .tuner_address = 0x60,
+ .clk_out_div = 7,
+};
+
+static int dm04_lme2510_set_voltage(struct dvb_frontend *fe,
+ fe_sec_voltage_t voltage)
+{
+ struct dvb_usb_device *d = fe_to_d(fe);
+ struct lme2510_state *st = fe_to_priv(fe);
+ static u8 voltage_low[] = LME_VOLTAGE_L;
+ static u8 voltage_high[] = LME_VOLTAGE_H;
+ static u8 rbuf[1];
+ int ret = 0, len = 3, rlen = 1;
+
+ mutex_lock(&d->i2c_mutex);
+
+ switch (voltage) {
+ case SEC_VOLTAGE_18:
+ ret |= lme2510_usb_talk(d,
+ voltage_high, len, rbuf, rlen);
+ break;
+
+ case SEC_VOLTAGE_OFF:
+ case SEC_VOLTAGE_13:
+ default:
+ ret |= lme2510_usb_talk(d,
+ voltage_low, len, rbuf, rlen);
+ break;
+ }
+
+ mutex_unlock(&d->i2c_mutex);
+
+ if (st->tuner_config == TUNER_RS2000)
+ if (st->fe_set_voltage)
+ st->fe_set_voltage(fe, voltage);
+
+
+ return (ret < 0) ? -ENODEV : 0;
+}
+
+static int dm04_read_status(struct dvb_frontend *fe, fe_status_t *status)
+{
+ struct dvb_usb_device *d = fe_to_d(fe);
+ struct lme2510_state *st = d->priv;
+ int ret = 0;
+
+ if (st->i2c_talk_onoff) {
+ if (st->fe_read_status) {
+ ret = st->fe_read_status(fe, status);
+ if (ret < 0)
+ return ret;
+ }
+
+ st->lock_status = *status;
+
+ if (*status & FE_HAS_LOCK && st->stream_on) {
+ mutex_lock(&d->i2c_mutex);
+
+ st->i2c_talk_onoff = 0;
+ ret = lme2510_stream_restart(d);
+
+ mutex_unlock(&d->i2c_mutex);
+ }
+
+ return ret;
+ }
+
+ /* Timeout of interrupt reached on RS2000 */
+ if (st->tuner_config == TUNER_RS2000 &&
+ time_after(jiffies, st->int_urb_due))
+ st->lock_status &= ~FE_HAS_LOCK;
+
+ *status = st->lock_status;
+
+ if (!(*status & FE_HAS_LOCK))
+ st->i2c_talk_onoff = 1;
+
+ return ret;
+}
+
+static int dm04_read_signal_strength(struct dvb_frontend *fe, u16 *strength)
+{
+ struct lme2510_state *st = fe_to_priv(fe);
+
+ if (st->fe_read_signal_strength && !st->stream_on)
+ return st->fe_read_signal_strength(fe, strength);
+
+ switch (st->tuner_config) {
+ case TUNER_LG:
+ *strength = 0xff - st->signal_level;
+ *strength |= *strength << 8;
+ break;
+ /* fall through */
+ case TUNER_S7395:
+ case TUNER_S0194:
+ *strength = 0xffff - (((st->signal_level * 2) << 8) * 5 / 4);
+ break;
+ case TUNER_RS2000:
+ *strength = (u16)((u32)st->signal_level * 0xffff / 0xff);
+ }
+
+ return 0;
+}
+
+static int dm04_read_snr(struct dvb_frontend *fe, u16 *snr)
+{
+ struct lme2510_state *st = fe_to_priv(fe);
+
+ if (st->fe_read_snr && !st->stream_on)
+ return st->fe_read_snr(fe, snr);
+
+ switch (st->tuner_config) {
+ case TUNER_LG:
+ *snr = 0xff - st->signal_sn;
+ *snr |= *snr << 8;
+ break;
+ /* fall through */
+ case TUNER_S7395:
+ case TUNER_S0194:
+ *snr = (u16)((0xff - st->signal_sn - 0xa1) * 3) << 8;
+ break;
+ case TUNER_RS2000:
+ *snr = (u16)((u32)st->signal_sn * 0xffff / 0x7f);
+ }
+
+ return 0;
+}
+
+static int dm04_read_ber(struct dvb_frontend *fe, u32 *ber)
+{
+ struct lme2510_state *st = fe_to_priv(fe);
+
+ if (st->fe_read_ber && !st->stream_on)
+ return st->fe_read_ber(fe, ber);
+
+ *ber = 0;
+
+ return 0;
+}
+
+static int dm04_read_ucblocks(struct dvb_frontend *fe, u32 *ucblocks)
+{
+ struct lme2510_state *st = fe_to_priv(fe);
+
+ if (st->fe_read_ucblocks && !st->stream_on)
+ return st->fe_read_ucblocks(fe, ucblocks);
+
+ *ucblocks = 0;
+
+ return 0;
+}
+
+static int lme_name(struct dvb_usb_adapter *adap)
+{
+ struct dvb_usb_device *d = adap_to_d(adap);
+ struct lme2510_state *st = adap_to_priv(adap);
+ const char *desc = d->name;
+ char *fe_name[] = {"", " LG TDQY-P001F", " SHARP:BS2F7HZ7395",
+ " SHARP:BS2F7HZ0194", " RS2000"};
+ char *name = adap->fe[0]->ops.info.name;
+
+ strlcpy(name, desc, 128);
+ strlcat(name, fe_name[st->tuner_config], 128);
+
+ return 0;
+}
+
+static int dm04_lme2510_frontend_attach(struct dvb_usb_adapter *adap)
+{
+ struct dvb_usb_device *d = adap_to_d(adap);
+ struct lme2510_state *st = d->priv;
+ int ret = 0;
+
+ st->i2c_talk_onoff = 1;
+ switch (le16_to_cpu(d->udev->descriptor.idProduct)) {
+ case 0x1122:
+ case 0x1120:
+ st->i2c_gate = 4;
+ adap->fe[0] = dvb_attach(tda10086_attach,
+ &tda10086_config, &d->i2c_adap);
+ if (adap->fe[0]) {
+ info("TUN Found Frontend TDA10086");
+ st->i2c_tuner_gate_w = 4;
+ st->i2c_tuner_gate_r = 4;
+ st->i2c_tuner_addr = 0x60;
+ st->tuner_config = TUNER_LG;
+ if (st->dvb_usb_lme2510_firmware != TUNER_LG) {
+ st->dvb_usb_lme2510_firmware = TUNER_LG;
+ ret = lme_firmware_switch(d, 1) ? 0 : -ENODEV;
+ }
+ break;
+ }
+
+ st->i2c_gate = 4;
+ adap->fe[0] = dvb_attach(stv0299_attach,
+ &sharp_z0194_config, &d->i2c_adap);
+ if (adap->fe[0]) {
+ info("FE Found Stv0299");
+ st->i2c_tuner_gate_w = 4;
+ st->i2c_tuner_gate_r = 5;
+ st->i2c_tuner_addr = 0x60;
+ st->tuner_config = TUNER_S0194;
+ if (st->dvb_usb_lme2510_firmware != TUNER_S0194) {
+ st->dvb_usb_lme2510_firmware = TUNER_S0194;
+ ret = lme_firmware_switch(d, 1) ? 0 : -ENODEV;
+ }
+ break;
+ }
+
+ st->i2c_gate = 5;
+ adap->fe[0] = dvb_attach(stv0288_attach, &lme_config,
+ &d->i2c_adap);
+
+ if (adap->fe[0]) {
+ info("FE Found Stv0288");
+ st->i2c_tuner_gate_w = 4;
+ st->i2c_tuner_gate_r = 5;
+ st->i2c_tuner_addr = 0x60;
+ st->tuner_config = TUNER_S7395;
+ if (st->dvb_usb_lme2510_firmware != TUNER_S7395) {
+ st->dvb_usb_lme2510_firmware = TUNER_S7395;
+ ret = lme_firmware_switch(d, 1) ? 0 : -ENODEV;
+ }
+ break;
+ }
+ case 0x22f0:
+ st->i2c_gate = 5;
+ adap->fe[0] = dvb_attach(m88rs2000_attach,
+ &m88rs2000_config, &d->i2c_adap);
+
+ if (adap->fe[0]) {
+ info("FE Found M88RS2000");
+ dvb_attach(ts2020_attach, adap->fe[0], &ts2020_config,
+ &d->i2c_adap);
+ st->i2c_tuner_gate_w = 5;
+ st->i2c_tuner_gate_r = 5;
+ st->i2c_tuner_addr = 0x60;
+ st->tuner_config = TUNER_RS2000;
+ st->fe_set_voltage =
+ adap->fe[0]->ops.set_voltage;
+ }
+ break;
+ }
+
+ if (adap->fe[0] == NULL) {
+ info("DM04/QQBOX Not Powered up or not Supported");
+ return -ENODEV;
+ }
+
+ if (ret) {
+ if (adap->fe[0]) {
+ dvb_frontend_detach(adap->fe[0]);
+ adap->fe[0] = NULL;
+ }
+ d->rc_map = NULL;
+ return -ENODEV;
+ }
+
+ st->fe_read_status = adap->fe[0]->ops.read_status;
+ st->fe_read_signal_strength = adap->fe[0]->ops.read_signal_strength;
+ st->fe_read_snr = adap->fe[0]->ops.read_snr;
+ st->fe_read_ber = adap->fe[0]->ops.read_ber;
+ st->fe_read_ucblocks = adap->fe[0]->ops.read_ucblocks;
+
+ adap->fe[0]->ops.read_status = dm04_read_status;
+ adap->fe[0]->ops.read_signal_strength = dm04_read_signal_strength;
+ adap->fe[0]->ops.read_snr = dm04_read_snr;
+ adap->fe[0]->ops.read_ber = dm04_read_ber;
+ adap->fe[0]->ops.read_ucblocks = dm04_read_ucblocks;
+ adap->fe[0]->ops.set_voltage = dm04_lme2510_set_voltage;
+
+ ret = lme_name(adap);
+ return ret;
+}
+
+static int dm04_lme2510_tuner(struct dvb_usb_adapter *adap)
+{
+ struct dvb_usb_device *d = adap_to_d(adap);
+ struct lme2510_state *st = adap_to_priv(adap);
+ char *tun_msg[] = {"", "TDA8263", "IX2505V", "DVB_PLL_OPERA", "RS2000"};
+ int ret = 0;
+
+ switch (st->tuner_config) {
+ case TUNER_LG:
+ if (dvb_attach(tda826x_attach, adap->fe[0], 0x60,
+ &d->i2c_adap, 1))
+ ret = st->tuner_config;
+ break;
+ case TUNER_S7395:
+ if (dvb_attach(ix2505v_attach , adap->fe[0], &lme_tuner,
+ &d->i2c_adap))
+ ret = st->tuner_config;
+ break;
+ case TUNER_S0194:
+ if (dvb_attach(dvb_pll_attach , adap->fe[0], 0x60,
+ &d->i2c_adap, DVB_PLL_OPERA1))
+ ret = st->tuner_config;
+ break;
+ case TUNER_RS2000:
+ ret = st->tuner_config;
+ break;
+ default:
+ break;
+ }
+
+ if (ret)
+ info("TUN Found %s tuner", tun_msg[ret]);
+ else {
+ info("TUN No tuner found --- resetting device");
+ lme_coldreset(d);
+ return -ENODEV;
+ }
+
+ /* Start the Interrupt*/
+ ret = lme2510_int_read(adap);
+ if (ret < 0) {
+ info("INT Unable to start Interrupt Service");
+ return -ENODEV;
+ }
+
+ return ret;
+}
+
+static int lme2510_powerup(struct dvb_usb_device *d, int onoff)
+{
+ struct lme2510_state *st = d->priv;
+ static u8 lnb_on[] = LNB_ON;
+ static u8 lnb_off[] = LNB_OFF;
+ static u8 rbuf[1];
+ int ret = 0, len = 3, rlen = 1;
+
+ mutex_lock(&d->i2c_mutex);
+
+ if (onoff)
+ ret = lme2510_usb_talk(d, lnb_on, len, rbuf, rlen);
+ else
+ ret = lme2510_usb_talk(d, lnb_off, len, rbuf, rlen);
+
+ st->i2c_talk_onoff = 1;
+
+ mutex_unlock(&d->i2c_mutex);
+
+ return ret;
+}
+
+static int lme2510_get_adapter_count(struct dvb_usb_device *d)
+{
+ return 1;
+}
+
+static int lme2510_identify_state(struct dvb_usb_device *d, const char **name)
+{
+ struct lme2510_state *st = d->priv;
+
+ usb_reset_configuration(d->udev);
+
+ usb_set_interface(d->udev,
+ d->props->bInterfaceNumber, 1);
+
+ st->dvb_usb_lme2510_firmware = dvb_usb_lme2510_firmware;
+
+ if (lme2510_return_status(d) == 0x44) {
+ *name = lme_firmware_switch(d, 0);
+ return COLD;
+ }
+
+ return 0;
+}
+
+static int lme2510_get_stream_config(struct dvb_frontend *fe, u8 *ts_type,
+ struct usb_data_stream_properties *stream)
+{
+ struct dvb_usb_adapter *adap = fe_to_adap(fe);
+ struct dvb_usb_device *d;
+
+ if (adap == NULL)
+ return 0;
+
+ d = adap_to_d(adap);
+
+ /* Turn PID filter on the fly by module option */
+ if (pid_filter == 2) {
+ adap->pid_filtering = true;
+ adap->max_feed_count = 15;
+ }
+
+ if (!(le16_to_cpu(d->udev->descriptor.idProduct)
+ == 0x1122))
+ stream->endpoint = 0x8;
+
+ return 0;
+}
+
+static int lme2510_get_rc_config(struct dvb_usb_device *d,
+ struct dvb_usb_rc *rc)
+{
+ rc->allowed_protos = RC_BIT_NEC;
+ return 0;
+}
+
+static void *lme2510_exit_int(struct dvb_usb_device *d)
+{
+ struct lme2510_state *st = d->priv;
+ struct dvb_usb_adapter *adap = &d->adapter[0];
+ void *buffer = NULL;
+
+ if (adap != NULL) {
+ lme2510_kill_urb(&adap->stream);
+ }
+
+ if (st->usb_buffer != NULL) {
+ st->i2c_talk_onoff = 1;
+ st->signal_level = 0;
+ st->signal_sn = 0;
+ buffer = st->usb_buffer;
+ }
+
+ if (st->lme_urb != NULL) {
+ usb_kill_urb(st->lme_urb);
+ usb_free_coherent(d->udev, 128, st->buffer,
+ st->lme_urb->transfer_dma);
+ info("Interrupt Service Stopped");
+ }
+
+ return buffer;
+}
+
+static void lme2510_exit(struct dvb_usb_device *d)
+{
+ void *usb_buffer;
+
+ if (d != NULL) {
+ usb_buffer = lme2510_exit_int(d);
+ kfree(usb_buffer);
+ }
+}
+
+static struct dvb_usb_device_properties lme2510_props = {
+ .driver_name = KBUILD_MODNAME,
+ .owner = THIS_MODULE,
+ .bInterfaceNumber = 0,
+ .adapter_nr = adapter_nr,
+ .size_of_priv = sizeof(struct lme2510_state),
+
+ .download_firmware = lme2510_download_firmware,
+
+ .power_ctrl = lme2510_powerup,
+ .identify_state = lme2510_identify_state,
+ .i2c_algo = &lme2510_i2c_algo,
+
+ .frontend_attach = dm04_lme2510_frontend_attach,
+ .tuner_attach = dm04_lme2510_tuner,
+ .get_stream_config = lme2510_get_stream_config,
+ .get_adapter_count = lme2510_get_adapter_count,
+ .streaming_ctrl = lme2510_streaming_ctrl,
+
+ .get_rc_config = lme2510_get_rc_config,
+
+ .exit = lme2510_exit,
+ .adapter = {
+ {
+ .caps = DVB_USB_ADAP_HAS_PID_FILTER|
+ DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
+ .pid_filter_count = 15,
+ .pid_filter = lme2510_pid_filter,
+ .pid_filter_ctrl = lme2510_pid_filter_ctrl,
+ .stream =
+ DVB_USB_STREAM_BULK(0x86, 10, 4096),
+ },
+ {
+ }
+ },
+};
+
+static const struct usb_device_id lme2510_id_table[] = {
+ { DVB_USB_DEVICE(0x3344, 0x1122, &lme2510_props,
+ "DM04_LME2510_DVB-S", RC_MAP_LME2510) },
+ { DVB_USB_DEVICE(0x3344, 0x1120, &lme2510_props,
+ "DM04_LME2510C_DVB-S", RC_MAP_LME2510) },
+ { DVB_USB_DEVICE(0x3344, 0x22f0, &lme2510_props,
+ "DM04_LME2510C_DVB-S RS2000", RC_MAP_LME2510) },
+ {} /* Terminating entry */
+};
+
+MODULE_DEVICE_TABLE(usb, lme2510_id_table);
+
+static struct usb_driver lme2510_driver = {
+ .name = KBUILD_MODNAME,
+ .probe = dvb_usbv2_probe,
+ .disconnect = dvb_usbv2_disconnect,
+ .id_table = lme2510_id_table,
+ .no_dynamic_id = 1,
+ .soft_unbind = 1,
+};
+
+module_usb_driver(lme2510_driver);
+
+MODULE_AUTHOR("Malcolm Priestley <tvboxspy@gmail.com>");
+MODULE_DESCRIPTION("LME2510(C) DVB-S USB2.0");
+MODULE_VERSION("2.06");
+MODULE_LICENSE("GPL");
+MODULE_FIRMWARE(LME2510_C_S7395);
+MODULE_FIRMWARE(LME2510_C_LG);
+MODULE_FIRMWARE(LME2510_C_S0194);
+MODULE_FIRMWARE(LME2510_C_RS2000);
+MODULE_FIRMWARE(LME2510_LG);
+MODULE_FIRMWARE(LME2510_S0194);
+
diff --git a/kernel/drivers/media/usb/dvb-usb-v2/lmedm04.h b/kernel/drivers/media/usb/dvb-usb-v2/lmedm04.h
new file mode 100644
index 000000000..e9c207205
--- /dev/null
+++ b/kernel/drivers/media/usb/dvb-usb-v2/lmedm04.h
@@ -0,0 +1,175 @@
+/* DVB USB compliant linux driver for
+ *
+ * DM04/QQBOX DVB-S USB BOX LME2510C + SHARP:BS2F7HZ7395
+ * LME2510C + LG TDQY-P001F
+ * LME2510 + LG TDQY-P001F
+ *
+ * MVB7395 (LME2510C+SHARP:BS2F7HZ7395)
+ * SHARP:BS2F7HZ7395 = (STV0288+Sharp IX2505V)
+ *
+ * MVB001F (LME2510+LGTDQT-P001F)
+ * LG TDQY - P001F =(TDA8263 + TDA10086H)
+ *
+ * MVB0001F (LME2510C+LGTDQT-P001F)
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation, version 2.
+ * *
+ * see Documentation/dvb/README.dvb-usb for more information
+ */
+#ifndef _DVB_USB_LME2510_H_
+#define _DVB_USB_LME2510_H_
+
+/* Streamer & PID
+ *
+ * Note: These commands do not actually stop the streaming
+ * but form some kind of packet filtering/stream count
+ * or tuning related functions.
+ * 06 XX
+ * offset 1 = 00 Enable Streaming
+ *
+ *
+ * PID
+ * 03 XX XX ----> reg number ---> setting....20 XX
+ * offset 1 = length
+ * offset 2 = start of data
+ * end byte -1 = 20
+ * end byte = clear pid always a0, other wise 9c, 9a ??
+ *
+*/
+#define LME_ST_ON_W {0x06, 0x00}
+#define LME_CLEAR_PID {0x03, 0x02, 0x20, 0xa0}
+#define LME_ZERO_PID {0x03, 0x06, 0x00, 0x00, 0x01, 0x00, 0x20, 0x9c}
+#define LME_ALL_PIDS {0x03, 0x06, 0x00, 0xff, 0x01, 0x1f, 0x20, 0x81}
+
+/* LNB Voltage
+ * 07 XX XX
+ * offset 1 = 01
+ * offset 2 = 00=Voltage low 01=Voltage high
+ *
+ * LNB Power
+ * 03 01 XX
+ * offset 2 = 00=ON 01=OFF
+ */
+
+#define LME_VOLTAGE_L {0x07, 0x01, 0x00}
+#define LME_VOLTAGE_H {0x07, 0x01, 0x01}
+#define LNB_ON {0x3a, 0x01, 0x00}
+#define LNB_OFF {0x3a, 0x01, 0x01}
+
+/* Initial stv0288 settings for 7395 Frontend */
+static u8 s7395_inittab[] = {
+ 0x01, 0x15,
+ 0x02, 0x20,
+ 0x03, 0xa0,
+ 0x04, 0xa0,
+ 0x05, 0x12,
+ 0x06, 0x00,
+ 0x09, 0x00,
+ 0x0a, 0x04,
+ 0x0b, 0x00,
+ 0x0c, 0x00,
+ 0x0d, 0x00,
+ 0x0e, 0xc1,
+ 0x0f, 0x54,
+ 0x11, 0x7a,
+ 0x12, 0x03,
+ 0x13, 0x48,
+ 0x14, 0x84,
+ 0x15, 0xc5,
+ 0x16, 0xb8,
+ 0x17, 0x9c,
+ 0x18, 0x00,
+ 0x19, 0xa6,
+ 0x1a, 0x88,
+ 0x1b, 0x8f,
+ 0x1c, 0xf0,
+ 0x20, 0x0b,
+ 0x21, 0x54,
+ 0x22, 0xff,
+ 0x23, 0x01,
+ 0x28, 0x46,
+ 0x29, 0x66,
+ 0x2a, 0x90,
+ 0x2b, 0xfa,
+ 0x2c, 0xd9,
+ 0x30, 0x0,
+ 0x31, 0x1e,
+ 0x32, 0x14,
+ 0x33, 0x0f,
+ 0x34, 0x09,
+ 0x35, 0x0c,
+ 0x36, 0x05,
+ 0x37, 0x2f,
+ 0x38, 0x16,
+ 0x39, 0xbd,
+ 0x3a, 0x0,
+ 0x3b, 0x13,
+ 0x3c, 0x11,
+ 0x3d, 0x30,
+ 0x40, 0x63,
+ 0x41, 0x04,
+ 0x42, 0x20,
+ 0x43, 0x00,
+ 0x44, 0x00,
+ 0x45, 0x00,
+ 0x46, 0x00,
+ 0x47, 0x00,
+ 0x4a, 0x00,
+ 0x50, 0x10,
+ 0x51, 0x36,
+ 0x52, 0x21,
+ 0x53, 0x94,
+ 0x54, 0xb2,
+ 0x55, 0x29,
+ 0x56, 0x64,
+ 0x57, 0x2b,
+ 0x58, 0x54,
+ 0x59, 0x86,
+ 0x5a, 0x00,
+ 0x5b, 0x9b,
+ 0x5c, 0x08,
+ 0x5d, 0x7f,
+ 0x5e, 0xff,
+ 0x5f, 0x8d,
+ 0x70, 0x0,
+ 0x71, 0x0,
+ 0x72, 0x0,
+ 0x74, 0x0,
+ 0x75, 0x0,
+ 0x76, 0x0,
+ 0x81, 0x0,
+ 0x82, 0x3f,
+ 0x83, 0x3f,
+ 0x84, 0x0,
+ 0x85, 0x0,
+ 0x88, 0x0,
+ 0x89, 0x0,
+ 0x8a, 0x0,
+ 0x8b, 0x0,
+ 0x8c, 0x0,
+ 0x90, 0x0,
+ 0x91, 0x0,
+ 0x92, 0x0,
+ 0x93, 0x0,
+ 0x94, 0x1c,
+ 0x97, 0x0,
+ 0xa0, 0x48,
+ 0xa1, 0x0,
+ 0xb0, 0xb8,
+ 0xb1, 0x3a,
+ 0xb2, 0x10,
+ 0xb3, 0x82,
+ 0xb4, 0x80,
+ 0xb5, 0x82,
+ 0xb6, 0x82,
+ 0xb7, 0x82,
+ 0xb8, 0x20,
+ 0xb9, 0x0,
+ 0xf0, 0x0,
+ 0xf1, 0x0,
+ 0xf2, 0xc0,
+ 0xff, 0xff,
+};
+#endif
diff --git a/kernel/drivers/media/usb/dvb-usb-v2/mxl111sf-demod.c b/kernel/drivers/media/usb/dvb-usb-v2/mxl111sf-demod.c
new file mode 100644
index 000000000..ecefa5c47
--- /dev/null
+++ b/kernel/drivers/media/usb/dvb-usb-v2/mxl111sf-demod.c
@@ -0,0 +1,606 @@
+/*
+ * mxl111sf-demod.c - driver for the MaxLinear MXL111SF DVB-T demodulator
+ *
+ * Copyright (C) 2010-2014 Michael Krufky <mkrufky@linuxtv.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include "mxl111sf-demod.h"
+#include "mxl111sf-reg.h"
+
+/* debug */
+static int mxl111sf_demod_debug;
+module_param_named(debug, mxl111sf_demod_debug, int, 0644);
+MODULE_PARM_DESC(debug, "set debugging level (1=info (or-able)).");
+
+#define mxl_dbg(fmt, arg...) \
+ if (mxl111sf_demod_debug) \
+ mxl_printk(KERN_DEBUG, fmt, ##arg)
+
+/* ------------------------------------------------------------------------ */
+
+struct mxl111sf_demod_state {
+ struct mxl111sf_state *mxl_state;
+
+ struct mxl111sf_demod_config *cfg;
+
+ struct dvb_frontend fe;
+};
+
+/* ------------------------------------------------------------------------ */
+
+static int mxl111sf_demod_read_reg(struct mxl111sf_demod_state *state,
+ u8 addr, u8 *data)
+{
+ return (state->cfg->read_reg) ?
+ state->cfg->read_reg(state->mxl_state, addr, data) :
+ -EINVAL;
+}
+
+static int mxl111sf_demod_write_reg(struct mxl111sf_demod_state *state,
+ u8 addr, u8 data)
+{
+ return (state->cfg->write_reg) ?
+ state->cfg->write_reg(state->mxl_state, addr, data) :
+ -EINVAL;
+}
+
+static
+int mxl111sf_demod_program_regs(struct mxl111sf_demod_state *state,
+ struct mxl111sf_reg_ctrl_info *ctrl_reg_info)
+{
+ return (state->cfg->program_regs) ?
+ state->cfg->program_regs(state->mxl_state, ctrl_reg_info) :
+ -EINVAL;
+}
+
+/* ------------------------------------------------------------------------ */
+/* TPS */
+
+static
+int mxl1x1sf_demod_get_tps_code_rate(struct mxl111sf_demod_state *state,
+ fe_code_rate_t *code_rate)
+{
+ u8 val;
+ int ret = mxl111sf_demod_read_reg(state, V6_CODE_RATE_TPS_REG, &val);
+ /* bit<2:0> - 000:1/2, 001:2/3, 010:3/4, 011:5/6, 100:7/8 */
+ if (mxl_fail(ret))
+ goto fail;
+
+ switch (val & V6_CODE_RATE_TPS_MASK) {
+ case 0:
+ *code_rate = FEC_1_2;
+ break;
+ case 1:
+ *code_rate = FEC_2_3;
+ break;
+ case 2:
+ *code_rate = FEC_3_4;
+ break;
+ case 3:
+ *code_rate = FEC_5_6;
+ break;
+ case 4:
+ *code_rate = FEC_7_8;
+ break;
+ }
+fail:
+ return ret;
+}
+
+static
+int mxl1x1sf_demod_get_tps_modulation(struct mxl111sf_demod_state *state,
+ fe_modulation_t *modulation)
+{
+ u8 val;
+ int ret = mxl111sf_demod_read_reg(state, V6_MODORDER_TPS_REG, &val);
+ /* Constellation, 00 : QPSK, 01 : 16QAM, 10:64QAM */
+ if (mxl_fail(ret))
+ goto fail;
+
+ switch ((val & V6_PARAM_CONSTELLATION_MASK) >> 4) {
+ case 0:
+ *modulation = QPSK;
+ break;
+ case 1:
+ *modulation = QAM_16;
+ break;
+ case 2:
+ *modulation = QAM_64;
+ break;
+ }
+fail:
+ return ret;
+}
+
+static
+int mxl1x1sf_demod_get_tps_guard_fft_mode(struct mxl111sf_demod_state *state,
+ fe_transmit_mode_t *fft_mode)
+{
+ u8 val;
+ int ret = mxl111sf_demod_read_reg(state, V6_MODE_TPS_REG, &val);
+ /* FFT Mode, 00:2K, 01:8K, 10:4K */
+ if (mxl_fail(ret))
+ goto fail;
+
+ switch ((val & V6_PARAM_FFT_MODE_MASK) >> 2) {
+ case 0:
+ *fft_mode = TRANSMISSION_MODE_2K;
+ break;
+ case 1:
+ *fft_mode = TRANSMISSION_MODE_8K;
+ break;
+ case 2:
+ *fft_mode = TRANSMISSION_MODE_4K;
+ break;
+ }
+fail:
+ return ret;
+}
+
+static
+int mxl1x1sf_demod_get_tps_guard_interval(struct mxl111sf_demod_state *state,
+ fe_guard_interval_t *guard)
+{
+ u8 val;
+ int ret = mxl111sf_demod_read_reg(state, V6_CP_TPS_REG, &val);
+ /* 00:1/32, 01:1/16, 10:1/8, 11:1/4 */
+ if (mxl_fail(ret))
+ goto fail;
+
+ switch ((val & V6_PARAM_GI_MASK) >> 4) {
+ case 0:
+ *guard = GUARD_INTERVAL_1_32;
+ break;
+ case 1:
+ *guard = GUARD_INTERVAL_1_16;
+ break;
+ case 2:
+ *guard = GUARD_INTERVAL_1_8;
+ break;
+ case 3:
+ *guard = GUARD_INTERVAL_1_4;
+ break;
+ }
+fail:
+ return ret;
+}
+
+static
+int mxl1x1sf_demod_get_tps_hierarchy(struct mxl111sf_demod_state *state,
+ fe_hierarchy_t *hierarchy)
+{
+ u8 val;
+ int ret = mxl111sf_demod_read_reg(state, V6_TPS_HIERACHY_REG, &val);
+ /* bit<6:4> - 000:Non hierarchy, 001:1, 010:2, 011:4 */
+ if (mxl_fail(ret))
+ goto fail;
+
+ switch ((val & V6_TPS_HIERARCHY_INFO_MASK) >> 6) {
+ case 0:
+ *hierarchy = HIERARCHY_NONE;
+ break;
+ case 1:
+ *hierarchy = HIERARCHY_1;
+ break;
+ case 2:
+ *hierarchy = HIERARCHY_2;
+ break;
+ case 3:
+ *hierarchy = HIERARCHY_4;
+ break;
+ }
+fail:
+ return ret;
+}
+
+/* ------------------------------------------------------------------------ */
+/* LOCKS */
+
+static
+int mxl1x1sf_demod_get_sync_lock_status(struct mxl111sf_demod_state *state,
+ int *sync_lock)
+{
+ u8 val = 0;
+ int ret = mxl111sf_demod_read_reg(state, V6_SYNC_LOCK_REG, &val);
+ if (mxl_fail(ret))
+ goto fail;
+ *sync_lock = (val & SYNC_LOCK_MASK) >> 4;
+fail:
+ return ret;
+}
+
+static
+int mxl1x1sf_demod_get_rs_lock_status(struct mxl111sf_demod_state *state,
+ int *rs_lock)
+{
+ u8 val = 0;
+ int ret = mxl111sf_demod_read_reg(state, V6_RS_LOCK_DET_REG, &val);
+ if (mxl_fail(ret))
+ goto fail;
+ *rs_lock = (val & RS_LOCK_DET_MASK) >> 3;
+fail:
+ return ret;
+}
+
+static
+int mxl1x1sf_demod_get_tps_lock_status(struct mxl111sf_demod_state *state,
+ int *tps_lock)
+{
+ u8 val = 0;
+ int ret = mxl111sf_demod_read_reg(state, V6_TPS_LOCK_REG, &val);
+ if (mxl_fail(ret))
+ goto fail;
+ *tps_lock = (val & V6_PARAM_TPS_LOCK_MASK) >> 6;
+fail:
+ return ret;
+}
+
+static
+int mxl1x1sf_demod_get_fec_lock_status(struct mxl111sf_demod_state *state,
+ int *fec_lock)
+{
+ u8 val = 0;
+ int ret = mxl111sf_demod_read_reg(state, V6_IRQ_STATUS_REG, &val);
+ if (mxl_fail(ret))
+ goto fail;
+ *fec_lock = (val & IRQ_MASK_FEC_LOCK) >> 4;
+fail:
+ return ret;
+}
+
+#if 0
+static
+int mxl1x1sf_demod_get_cp_lock_status(struct mxl111sf_demod_state *state,
+ int *cp_lock)
+{
+ u8 val = 0;
+ int ret = mxl111sf_demod_read_reg(state, V6_CP_LOCK_DET_REG, &val);
+ if (mxl_fail(ret))
+ goto fail;
+ *cp_lock = (val & V6_CP_LOCK_DET_MASK) >> 2;
+fail:
+ return ret;
+}
+#endif
+
+static int mxl1x1sf_demod_reset_irq_status(struct mxl111sf_demod_state *state)
+{
+ return mxl111sf_demod_write_reg(state, 0x0e, 0xff);
+}
+
+/* ------------------------------------------------------------------------ */
+
+static int mxl111sf_demod_set_frontend(struct dvb_frontend *fe)
+{
+ struct mxl111sf_demod_state *state = fe->demodulator_priv;
+ int ret = 0;
+
+ struct mxl111sf_reg_ctrl_info phy_pll_patch[] = {
+ {0x00, 0xff, 0x01}, /* change page to 1 */
+ {0x40, 0xff, 0x05},
+ {0x40, 0xff, 0x01},
+ {0x41, 0xff, 0xca},
+ {0x41, 0xff, 0xc0},
+ {0x00, 0xff, 0x00}, /* change page to 0 */
+ {0, 0, 0}
+ };
+
+ mxl_dbg("()");
+
+ if (fe->ops.tuner_ops.set_params) {
+ ret = fe->ops.tuner_ops.set_params(fe);
+ if (mxl_fail(ret))
+ goto fail;
+ msleep(50);
+ }
+ ret = mxl111sf_demod_program_regs(state, phy_pll_patch);
+ mxl_fail(ret);
+ msleep(50);
+ ret = mxl1x1sf_demod_reset_irq_status(state);
+ mxl_fail(ret);
+ msleep(100);
+fail:
+ return ret;
+}
+
+/* ------------------------------------------------------------------------ */
+
+#if 0
+/* resets TS Packet error count */
+/* After setting 7th bit of V5_PER_COUNT_RESET_REG, it should be reset to 0. */
+static
+int mxl1x1sf_demod_reset_packet_error_count(struct mxl111sf_demod_state *state)
+{
+ struct mxl111sf_reg_ctrl_info reset_per_count[] = {
+ {0x20, 0x01, 0x01},
+ {0x20, 0x01, 0x00},
+ {0, 0, 0}
+ };
+ return mxl111sf_demod_program_regs(state, reset_per_count);
+}
+#endif
+
+/* returns TS Packet error count */
+/* PER Count = FEC_PER_COUNT * (2 ** (FEC_PER_SCALE * 4)) */
+static int mxl111sf_demod_read_ucblocks(struct dvb_frontend *fe, u32 *ucblocks)
+{
+ struct mxl111sf_demod_state *state = fe->demodulator_priv;
+ u32 fec_per_count, fec_per_scale;
+ u8 val;
+ int ret;
+
+ *ucblocks = 0;
+
+ /* FEC_PER_COUNT Register */
+ ret = mxl111sf_demod_read_reg(state, V6_FEC_PER_COUNT_REG, &val);
+ if (mxl_fail(ret))
+ goto fail;
+
+ fec_per_count = val;
+
+ /* FEC_PER_SCALE Register */
+ ret = mxl111sf_demod_read_reg(state, V6_FEC_PER_SCALE_REG, &val);
+ if (mxl_fail(ret))
+ goto fail;
+
+ val &= V6_FEC_PER_SCALE_MASK;
+ val *= 4;
+
+ fec_per_scale = 1 << val;
+
+ fec_per_count *= fec_per_scale;
+
+ *ucblocks = fec_per_count;
+fail:
+ return ret;
+}
+
+#ifdef MXL111SF_DEMOD_ENABLE_CALCULATIONS
+/* FIXME: leaving this enabled breaks the build on some architectures,
+ * and we shouldn't have any floating point math in the kernel, anyway.
+ *
+ * These macros need to be re-written, but it's harmless to simply
+ * return zero for now. */
+#define CALCULATE_BER(avg_errors, count) \
+ ((u32)(avg_errors * 4)/(count*64*188*8))
+#define CALCULATE_SNR(data) \
+ ((u32)((10 * (u32)data / 64) - 2.5))
+#else
+#define CALCULATE_BER(avg_errors, count) 0
+#define CALCULATE_SNR(data) 0
+#endif
+
+static int mxl111sf_demod_read_ber(struct dvb_frontend *fe, u32 *ber)
+{
+ struct mxl111sf_demod_state *state = fe->demodulator_priv;
+ u8 val1, val2, val3;
+ int ret;
+
+ *ber = 0;
+
+ ret = mxl111sf_demod_read_reg(state, V6_RS_AVG_ERRORS_LSB_REG, &val1);
+ if (mxl_fail(ret))
+ goto fail;
+ ret = mxl111sf_demod_read_reg(state, V6_RS_AVG_ERRORS_MSB_REG, &val2);
+ if (mxl_fail(ret))
+ goto fail;
+ ret = mxl111sf_demod_read_reg(state, V6_N_ACCUMULATE_REG, &val3);
+ if (mxl_fail(ret))
+ goto fail;
+
+ *ber = CALCULATE_BER((val1 | (val2 << 8)), val3);
+fail:
+ return ret;
+}
+
+static int mxl111sf_demod_calc_snr(struct mxl111sf_demod_state *state,
+ u16 *snr)
+{
+ u8 val1, val2;
+ int ret;
+
+ *snr = 0;
+
+ ret = mxl111sf_demod_read_reg(state, V6_SNR_RB_LSB_REG, &val1);
+ if (mxl_fail(ret))
+ goto fail;
+ ret = mxl111sf_demod_read_reg(state, V6_SNR_RB_MSB_REG, &val2);
+ if (mxl_fail(ret))
+ goto fail;
+
+ *snr = CALCULATE_SNR(val1 | ((val2 & 0x03) << 8));
+fail:
+ return ret;
+}
+
+static int mxl111sf_demod_read_snr(struct dvb_frontend *fe, u16 *snr)
+{
+ struct mxl111sf_demod_state *state = fe->demodulator_priv;
+
+ int ret = mxl111sf_demod_calc_snr(state, snr);
+ if (mxl_fail(ret))
+ goto fail;
+
+ *snr /= 10; /* 0.1 dB */
+fail:
+ return ret;
+}
+
+static int mxl111sf_demod_read_status(struct dvb_frontend *fe,
+ fe_status_t *status)
+{
+ struct mxl111sf_demod_state *state = fe->demodulator_priv;
+ int ret, locked, cr_lock, sync_lock, fec_lock;
+
+ *status = 0;
+
+ ret = mxl1x1sf_demod_get_rs_lock_status(state, &locked);
+ if (mxl_fail(ret))
+ goto fail;
+ ret = mxl1x1sf_demod_get_tps_lock_status(state, &cr_lock);
+ if (mxl_fail(ret))
+ goto fail;
+ ret = mxl1x1sf_demod_get_sync_lock_status(state, &sync_lock);
+ if (mxl_fail(ret))
+ goto fail;
+ ret = mxl1x1sf_demod_get_fec_lock_status(state, &fec_lock);
+ if (mxl_fail(ret))
+ goto fail;
+
+ if (locked)
+ *status |= FE_HAS_SIGNAL;
+ if (cr_lock)
+ *status |= FE_HAS_CARRIER;
+ if (sync_lock)
+ *status |= FE_HAS_SYNC;
+ if (fec_lock) /* false positives? */
+ *status |= FE_HAS_VITERBI;
+
+ if ((locked) && (cr_lock) && (sync_lock))
+ *status |= FE_HAS_LOCK;
+fail:
+ return ret;
+}
+
+static int mxl111sf_demod_read_signal_strength(struct dvb_frontend *fe,
+ u16 *signal_strength)
+{
+ struct mxl111sf_demod_state *state = fe->demodulator_priv;
+ fe_modulation_t modulation;
+ u16 snr;
+
+ mxl111sf_demod_calc_snr(state, &snr);
+ mxl1x1sf_demod_get_tps_modulation(state, &modulation);
+
+ switch (modulation) {
+ case QPSK:
+ *signal_strength = (snr >= 1300) ?
+ min(65535, snr * 44) : snr * 38;
+ break;
+ case QAM_16:
+ *signal_strength = (snr >= 1500) ?
+ min(65535, snr * 38) : snr * 33;
+ break;
+ case QAM_64:
+ *signal_strength = (snr >= 2000) ?
+ min(65535, snr * 29) : snr * 25;
+ break;
+ default:
+ *signal_strength = 0;
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int mxl111sf_demod_get_frontend(struct dvb_frontend *fe)
+{
+ struct dtv_frontend_properties *p = &fe->dtv_property_cache;
+ struct mxl111sf_demod_state *state = fe->demodulator_priv;
+
+ mxl_dbg("()");
+#if 0
+ p->inversion = /* FIXME */ ? INVERSION_ON : INVERSION_OFF;
+#endif
+ if (fe->ops.tuner_ops.get_bandwidth)
+ fe->ops.tuner_ops.get_bandwidth(fe, &p->bandwidth_hz);
+ if (fe->ops.tuner_ops.get_frequency)
+ fe->ops.tuner_ops.get_frequency(fe, &p->frequency);
+ mxl1x1sf_demod_get_tps_code_rate(state, &p->code_rate_HP);
+ mxl1x1sf_demod_get_tps_code_rate(state, &p->code_rate_LP);
+ mxl1x1sf_demod_get_tps_modulation(state, &p->modulation);
+ mxl1x1sf_demod_get_tps_guard_fft_mode(state,
+ &p->transmission_mode);
+ mxl1x1sf_demod_get_tps_guard_interval(state,
+ &p->guard_interval);
+ mxl1x1sf_demod_get_tps_hierarchy(state,
+ &p->hierarchy);
+
+ return 0;
+}
+
+static
+int mxl111sf_demod_get_tune_settings(struct dvb_frontend *fe,
+ struct dvb_frontend_tune_settings *tune)
+{
+ tune->min_delay_ms = 1000;
+ return 0;
+}
+
+static void mxl111sf_demod_release(struct dvb_frontend *fe)
+{
+ struct mxl111sf_demod_state *state = fe->demodulator_priv;
+ mxl_dbg("()");
+ kfree(state);
+ fe->demodulator_priv = NULL;
+}
+
+static struct dvb_frontend_ops mxl111sf_demod_ops = {
+ .delsys = { SYS_DVBT },
+ .info = {
+ .name = "MaxLinear MxL111SF DVB-T demodulator",
+ .frequency_min = 177000000,
+ .frequency_max = 858000000,
+ .frequency_stepsize = 166666,
+ .caps = FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 |
+ FE_CAN_FEC_5_6 | FE_CAN_FEC_7_8 | FE_CAN_FEC_AUTO |
+ FE_CAN_QPSK | FE_CAN_QAM_16 | FE_CAN_QAM_64 |
+ FE_CAN_QAM_AUTO |
+ FE_CAN_HIERARCHY_AUTO | FE_CAN_GUARD_INTERVAL_AUTO |
+ FE_CAN_TRANSMISSION_MODE_AUTO | FE_CAN_RECOVER
+ },
+ .release = mxl111sf_demod_release,
+#if 0
+ .init = mxl111sf_init,
+ .i2c_gate_ctrl = mxl111sf_i2c_gate_ctrl,
+#endif
+ .set_frontend = mxl111sf_demod_set_frontend,
+ .get_frontend = mxl111sf_demod_get_frontend,
+ .get_tune_settings = mxl111sf_demod_get_tune_settings,
+ .read_status = mxl111sf_demod_read_status,
+ .read_signal_strength = mxl111sf_demod_read_signal_strength,
+ .read_ber = mxl111sf_demod_read_ber,
+ .read_snr = mxl111sf_demod_read_snr,
+ .read_ucblocks = mxl111sf_demod_read_ucblocks,
+};
+
+struct dvb_frontend *mxl111sf_demod_attach(struct mxl111sf_state *mxl_state,
+ struct mxl111sf_demod_config *cfg)
+{
+ struct mxl111sf_demod_state *state = NULL;
+
+ mxl_dbg("()");
+
+ state = kzalloc(sizeof(struct mxl111sf_demod_state), GFP_KERNEL);
+ if (state == NULL)
+ return NULL;
+
+ state->mxl_state = mxl_state;
+ state->cfg = cfg;
+
+ memcpy(&state->fe.ops, &mxl111sf_demod_ops,
+ sizeof(struct dvb_frontend_ops));
+
+ state->fe.demodulator_priv = state;
+ return &state->fe;
+}
+EXPORT_SYMBOL_GPL(mxl111sf_demod_attach);
+
+MODULE_DESCRIPTION("MaxLinear MxL111SF DVB-T demodulator driver");
+MODULE_AUTHOR("Michael Krufky <mkrufky@linuxtv.org>");
+MODULE_LICENSE("GPL");
+MODULE_VERSION("0.1");
diff --git a/kernel/drivers/media/usb/dvb-usb-v2/mxl111sf-demod.h b/kernel/drivers/media/usb/dvb-usb-v2/mxl111sf-demod.h
new file mode 100644
index 000000000..0bd83e526
--- /dev/null
+++ b/kernel/drivers/media/usb/dvb-usb-v2/mxl111sf-demod.h
@@ -0,0 +1,49 @@
+/*
+ * mxl111sf-demod.h - driver for the MaxLinear MXL111SF DVB-T demodulator
+ *
+ * Copyright (C) 2010-2014 Michael Krufky <mkrufky@linuxtv.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __MXL111SF_DEMOD_H__
+#define __MXL111SF_DEMOD_H__
+
+#include <linux/kconfig.h>
+#include "dvb_frontend.h"
+#include "mxl111sf.h"
+
+struct mxl111sf_demod_config {
+ int (*read_reg)(struct mxl111sf_state *state, u8 addr, u8 *data);
+ int (*write_reg)(struct mxl111sf_state *state, u8 addr, u8 data);
+ int (*program_regs)(struct mxl111sf_state *state,
+ struct mxl111sf_reg_ctrl_info *ctrl_reg_info);
+};
+
+#if IS_ENABLED(CONFIG_DVB_USB_MXL111SF)
+extern
+struct dvb_frontend *mxl111sf_demod_attach(struct mxl111sf_state *mxl_state,
+ struct mxl111sf_demod_config *cfg);
+#else
+static inline
+struct dvb_frontend *mxl111sf_demod_attach(struct mxl111sf_state *mxl_state,
+ struct mxl111sf_demod_config *cfg)
+{
+ printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
+ return NULL;
+}
+#endif /* CONFIG_DVB_USB_MXL111SF */
+
+#endif /* __MXL111SF_DEMOD_H__ */
diff --git a/kernel/drivers/media/usb/dvb-usb-v2/mxl111sf-gpio.c b/kernel/drivers/media/usb/dvb-usb-v2/mxl111sf-gpio.c
new file mode 100644
index 000000000..2180c13a6
--- /dev/null
+++ b/kernel/drivers/media/usb/dvb-usb-v2/mxl111sf-gpio.c
@@ -0,0 +1,757 @@
+/*
+ * mxl111sf-gpio.c - driver for the MaxLinear MXL111SF
+ *
+ * Copyright (C) 2010-2014 Michael Krufky <mkrufky@linuxtv.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include "mxl111sf-gpio.h"
+#include "mxl111sf-i2c.h"
+#include "mxl111sf.h"
+
+/* ------------------------------------------------------------------------- */
+
+#define MXL_GPIO_MUX_REG_0 0x84
+#define MXL_GPIO_MUX_REG_1 0x89
+#define MXL_GPIO_MUX_REG_2 0x82
+
+#define MXL_GPIO_DIR_INPUT 0
+#define MXL_GPIO_DIR_OUTPUT 1
+
+
+static int mxl111sf_set_gpo_state(struct mxl111sf_state *state, u8 pin, u8 val)
+{
+ int ret;
+ u8 tmp;
+
+ mxl_debug_adv("(%d, %d)", pin, val);
+
+ if ((pin > 0) && (pin < 8)) {
+ ret = mxl111sf_read_reg(state, 0x19, &tmp);
+ if (mxl_fail(ret))
+ goto fail;
+ tmp &= ~(1 << (pin - 1));
+ tmp |= (val << (pin - 1));
+ ret = mxl111sf_write_reg(state, 0x19, tmp);
+ if (mxl_fail(ret))
+ goto fail;
+ } else if (pin <= 10) {
+ if (pin == 0)
+ pin += 7;
+ ret = mxl111sf_read_reg(state, 0x30, &tmp);
+ if (mxl_fail(ret))
+ goto fail;
+ tmp &= ~(1 << (pin - 3));
+ tmp |= (val << (pin - 3));
+ ret = mxl111sf_write_reg(state, 0x30, tmp);
+ if (mxl_fail(ret))
+ goto fail;
+ } else
+ ret = -EINVAL;
+fail:
+ return ret;
+}
+
+static int mxl111sf_get_gpi_state(struct mxl111sf_state *state, u8 pin, u8 *val)
+{
+ int ret;
+ u8 tmp;
+
+ mxl_debug("(0x%02x)", pin);
+
+ *val = 0;
+
+ switch (pin) {
+ case 0:
+ case 1:
+ case 2:
+ case 3:
+ ret = mxl111sf_read_reg(state, 0x23, &tmp);
+ if (mxl_fail(ret))
+ goto fail;
+ *val = (tmp >> (pin + 4)) & 0x01;
+ break;
+ case 4:
+ case 5:
+ case 6:
+ case 7:
+ ret = mxl111sf_read_reg(state, 0x2f, &tmp);
+ if (mxl_fail(ret))
+ goto fail;
+ *val = (tmp >> pin) & 0x01;
+ break;
+ case 8:
+ case 9:
+ case 10:
+ ret = mxl111sf_read_reg(state, 0x22, &tmp);
+ if (mxl_fail(ret))
+ goto fail;
+ *val = (tmp >> (pin - 3)) & 0x01;
+ break;
+ default:
+ return -EINVAL; /* invalid pin */
+ }
+fail:
+ return ret;
+}
+
+struct mxl_gpio_cfg {
+ u8 pin;
+ u8 dir;
+ u8 val;
+};
+
+static int mxl111sf_config_gpio_pins(struct mxl111sf_state *state,
+ struct mxl_gpio_cfg *gpio_cfg)
+{
+ int ret;
+ u8 tmp;
+
+ mxl_debug_adv("(%d, %d)", gpio_cfg->pin, gpio_cfg->dir);
+
+ switch (gpio_cfg->pin) {
+ case 0:
+ case 1:
+ case 2:
+ case 3:
+ ret = mxl111sf_read_reg(state, MXL_GPIO_MUX_REG_0, &tmp);
+ if (mxl_fail(ret))
+ goto fail;
+ tmp &= ~(1 << (gpio_cfg->pin + 4));
+ tmp |= (gpio_cfg->dir << (gpio_cfg->pin + 4));
+ ret = mxl111sf_write_reg(state, MXL_GPIO_MUX_REG_0, tmp);
+ if (mxl_fail(ret))
+ goto fail;
+ break;
+ case 4:
+ case 5:
+ case 6:
+ case 7:
+ ret = mxl111sf_read_reg(state, MXL_GPIO_MUX_REG_1, &tmp);
+ if (mxl_fail(ret))
+ goto fail;
+ tmp &= ~(1 << gpio_cfg->pin);
+ tmp |= (gpio_cfg->dir << gpio_cfg->pin);
+ ret = mxl111sf_write_reg(state, MXL_GPIO_MUX_REG_1, tmp);
+ if (mxl_fail(ret))
+ goto fail;
+ break;
+ case 8:
+ case 9:
+ case 10:
+ ret = mxl111sf_read_reg(state, MXL_GPIO_MUX_REG_2, &tmp);
+ if (mxl_fail(ret))
+ goto fail;
+ tmp &= ~(1 << (gpio_cfg->pin - 3));
+ tmp |= (gpio_cfg->dir << (gpio_cfg->pin - 3));
+ ret = mxl111sf_write_reg(state, MXL_GPIO_MUX_REG_2, tmp);
+ if (mxl_fail(ret))
+ goto fail;
+ break;
+ default:
+ return -EINVAL; /* invalid pin */
+ }
+
+ ret = (MXL_GPIO_DIR_OUTPUT == gpio_cfg->dir) ?
+ mxl111sf_set_gpo_state(state,
+ gpio_cfg->pin, gpio_cfg->val) :
+ mxl111sf_get_gpi_state(state,
+ gpio_cfg->pin, &gpio_cfg->val);
+ mxl_fail(ret);
+fail:
+ return ret;
+}
+
+static int mxl111sf_hw_do_set_gpio(struct mxl111sf_state *state,
+ int gpio, int direction, int val)
+{
+ struct mxl_gpio_cfg gpio_config = {
+ .pin = gpio,
+ .dir = direction,
+ .val = val,
+ };
+
+ mxl_debug("(%d, %d, %d)", gpio, direction, val);
+
+ return mxl111sf_config_gpio_pins(state, &gpio_config);
+}
+
+/* ------------------------------------------------------------------------- */
+
+#define PIN_MUX_MPEG_MODE_MASK 0x40 /* 0x17 <6> */
+#define PIN_MUX_MPEG_PAR_EN_MASK 0x01 /* 0x18 <0> */
+#define PIN_MUX_MPEG_SER_EN_MASK 0x02 /* 0x18 <1> */
+#define PIN_MUX_MPG_IN_MUX_MASK 0x80 /* 0x3D <7> */
+#define PIN_MUX_BT656_ENABLE_MASK 0x04 /* 0x12 <2> */
+#define PIN_MUX_I2S_ENABLE_MASK 0x40 /* 0x15 <6> */
+#define PIN_MUX_SPI_MODE_MASK 0x10 /* 0x3D <4> */
+#define PIN_MUX_MCLK_EN_CTRL_MASK 0x10 /* 0x82 <4> */
+#define PIN_MUX_MPSYN_EN_CTRL_MASK 0x20 /* 0x82 <5> */
+#define PIN_MUX_MDVAL_EN_CTRL_MASK 0x40 /* 0x82 <6> */
+#define PIN_MUX_MPERR_EN_CTRL_MASK 0x80 /* 0x82 <7> */
+#define PIN_MUX_MDAT_EN_0_MASK 0x10 /* 0x84 <4> */
+#define PIN_MUX_MDAT_EN_1_MASK 0x20 /* 0x84 <5> */
+#define PIN_MUX_MDAT_EN_2_MASK 0x40 /* 0x84 <6> */
+#define PIN_MUX_MDAT_EN_3_MASK 0x80 /* 0x84 <7> */
+#define PIN_MUX_MDAT_EN_4_MASK 0x10 /* 0x89 <4> */
+#define PIN_MUX_MDAT_EN_5_MASK 0x20 /* 0x89 <5> */
+#define PIN_MUX_MDAT_EN_6_MASK 0x40 /* 0x89 <6> */
+#define PIN_MUX_MDAT_EN_7_MASK 0x80 /* 0x89 <7> */
+
+int mxl111sf_config_pin_mux_modes(struct mxl111sf_state *state,
+ enum mxl111sf_mux_config pin_mux_config)
+{
+ u8 r12, r15, r17, r18, r3D, r82, r84, r89;
+ int ret;
+
+ mxl_debug("(%d)", pin_mux_config);
+
+ ret = mxl111sf_read_reg(state, 0x17, &r17);
+ if (mxl_fail(ret))
+ goto fail;
+ ret = mxl111sf_read_reg(state, 0x18, &r18);
+ if (mxl_fail(ret))
+ goto fail;
+ ret = mxl111sf_read_reg(state, 0x12, &r12);
+ if (mxl_fail(ret))
+ goto fail;
+ ret = mxl111sf_read_reg(state, 0x15, &r15);
+ if (mxl_fail(ret))
+ goto fail;
+ ret = mxl111sf_read_reg(state, 0x82, &r82);
+ if (mxl_fail(ret))
+ goto fail;
+ ret = mxl111sf_read_reg(state, 0x84, &r84);
+ if (mxl_fail(ret))
+ goto fail;
+ ret = mxl111sf_read_reg(state, 0x89, &r89);
+ if (mxl_fail(ret))
+ goto fail;
+ ret = mxl111sf_read_reg(state, 0x3D, &r3D);
+ if (mxl_fail(ret))
+ goto fail;
+
+ switch (pin_mux_config) {
+ case PIN_MUX_TS_OUT_PARALLEL:
+ /* mpeg_mode = 1 */
+ r17 |= PIN_MUX_MPEG_MODE_MASK;
+ /* mpeg_par_en = 1 */
+ r18 |= PIN_MUX_MPEG_PAR_EN_MASK;
+ /* mpeg_ser_en = 0 */
+ r18 &= ~PIN_MUX_MPEG_SER_EN_MASK;
+ /* mpg_in_mux = 0 */
+ r3D &= ~PIN_MUX_MPG_IN_MUX_MASK;
+ /* bt656_enable = 0 */
+ r12 &= ~PIN_MUX_BT656_ENABLE_MASK;
+ /* i2s_enable = 0 */
+ r15 &= ~PIN_MUX_I2S_ENABLE_MASK;
+ /* spi_mode = 0 */
+ r3D &= ~PIN_MUX_SPI_MODE_MASK;
+ /* mclk_en_ctrl = 1 */
+ r82 |= PIN_MUX_MCLK_EN_CTRL_MASK;
+ /* mperr_en_ctrl = 1 */
+ r82 |= PIN_MUX_MPERR_EN_CTRL_MASK;
+ /* mdval_en_ctrl = 1 */
+ r82 |= PIN_MUX_MDVAL_EN_CTRL_MASK;
+ /* mpsyn_en_ctrl = 1 */
+ r82 |= PIN_MUX_MPSYN_EN_CTRL_MASK;
+ /* mdat_en_ctrl[3:0] = 0xF */
+ r84 |= 0xF0;
+ /* mdat_en_ctrl[7:4] = 0xF */
+ r89 |= 0xF0;
+ break;
+ case PIN_MUX_TS_OUT_SERIAL:
+ /* mpeg_mode = 1 */
+ r17 |= PIN_MUX_MPEG_MODE_MASK;
+ /* mpeg_par_en = 0 */
+ r18 &= ~PIN_MUX_MPEG_PAR_EN_MASK;
+ /* mpeg_ser_en = 1 */
+ r18 |= PIN_MUX_MPEG_SER_EN_MASK;
+ /* mpg_in_mux = 0 */
+ r3D &= ~PIN_MUX_MPG_IN_MUX_MASK;
+ /* bt656_enable = 0 */
+ r12 &= ~PIN_MUX_BT656_ENABLE_MASK;
+ /* i2s_enable = 0 */
+ r15 &= ~PIN_MUX_I2S_ENABLE_MASK;
+ /* spi_mode = 0 */
+ r3D &= ~PIN_MUX_SPI_MODE_MASK;
+ /* mclk_en_ctrl = 1 */
+ r82 |= PIN_MUX_MCLK_EN_CTRL_MASK;
+ /* mperr_en_ctrl = 1 */
+ r82 |= PIN_MUX_MPERR_EN_CTRL_MASK;
+ /* mdval_en_ctrl = 1 */
+ r82 |= PIN_MUX_MDVAL_EN_CTRL_MASK;
+ /* mpsyn_en_ctrl = 1 */
+ r82 |= PIN_MUX_MPSYN_EN_CTRL_MASK;
+ /* mdat_en_ctrl[3:0] = 0xF */
+ r84 |= 0xF0;
+ /* mdat_en_ctrl[7:4] = 0xF */
+ r89 |= 0xF0;
+ break;
+ case PIN_MUX_GPIO_MODE:
+ /* mpeg_mode = 0 */
+ r17 &= ~PIN_MUX_MPEG_MODE_MASK;
+ /* mpeg_par_en = 0 */
+ r18 &= ~PIN_MUX_MPEG_PAR_EN_MASK;
+ /* mpeg_ser_en = 0 */
+ r18 &= ~PIN_MUX_MPEG_SER_EN_MASK;
+ /* mpg_in_mux = 0 */
+ r3D &= ~PIN_MUX_MPG_IN_MUX_MASK;
+ /* bt656_enable = 0 */
+ r12 &= ~PIN_MUX_BT656_ENABLE_MASK;
+ /* i2s_enable = 0 */
+ r15 &= ~PIN_MUX_I2S_ENABLE_MASK;
+ /* spi_mode = 0 */
+ r3D &= ~PIN_MUX_SPI_MODE_MASK;
+ /* mclk_en_ctrl = 0 */
+ r82 &= ~PIN_MUX_MCLK_EN_CTRL_MASK;
+ /* mperr_en_ctrl = 0 */
+ r82 &= ~PIN_MUX_MPERR_EN_CTRL_MASK;
+ /* mdval_en_ctrl = 0 */
+ r82 &= ~PIN_MUX_MDVAL_EN_CTRL_MASK;
+ /* mpsyn_en_ctrl = 0 */
+ r82 &= ~PIN_MUX_MPSYN_EN_CTRL_MASK;
+ /* mdat_en_ctrl[3:0] = 0x0 */
+ r84 &= 0x0F;
+ /* mdat_en_ctrl[7:4] = 0x0 */
+ r89 &= 0x0F;
+ break;
+ case PIN_MUX_TS_SERIAL_IN_MODE_0:
+ /* mpeg_mode = 0 */
+ r17 &= ~PIN_MUX_MPEG_MODE_MASK;
+ /* mpeg_par_en = 0 */
+ r18 &= ~PIN_MUX_MPEG_PAR_EN_MASK;
+ /* mpeg_ser_en = 1 */
+ r18 |= PIN_MUX_MPEG_SER_EN_MASK;
+ /* mpg_in_mux = 0 */
+ r3D &= ~PIN_MUX_MPG_IN_MUX_MASK;
+ /* bt656_enable = 0 */
+ r12 &= ~PIN_MUX_BT656_ENABLE_MASK;
+ /* i2s_enable = 0 */
+ r15 &= ~PIN_MUX_I2S_ENABLE_MASK;
+ /* spi_mode = 0 */
+ r3D &= ~PIN_MUX_SPI_MODE_MASK;
+ /* mclk_en_ctrl = 0 */
+ r82 &= ~PIN_MUX_MCLK_EN_CTRL_MASK;
+ /* mperr_en_ctrl = 0 */
+ r82 &= ~PIN_MUX_MPERR_EN_CTRL_MASK;
+ /* mdval_en_ctrl = 0 */
+ r82 &= ~PIN_MUX_MDVAL_EN_CTRL_MASK;
+ /* mpsyn_en_ctrl = 0 */
+ r82 &= ~PIN_MUX_MPSYN_EN_CTRL_MASK;
+ /* mdat_en_ctrl[3:0] = 0x0 */
+ r84 &= 0x0F;
+ /* mdat_en_ctrl[7:4] = 0x0 */
+ r89 &= 0x0F;
+ break;
+ case PIN_MUX_TS_SERIAL_IN_MODE_1:
+ /* mpeg_mode = 0 */
+ r17 &= ~PIN_MUX_MPEG_MODE_MASK;
+ /* mpeg_par_en = 0 */
+ r18 &= ~PIN_MUX_MPEG_PAR_EN_MASK;
+ /* mpeg_ser_en = 1 */
+ r18 |= PIN_MUX_MPEG_SER_EN_MASK;
+ /* mpg_in_mux = 1 */
+ r3D |= PIN_MUX_MPG_IN_MUX_MASK;
+ /* bt656_enable = 0 */
+ r12 &= ~PIN_MUX_BT656_ENABLE_MASK;
+ /* i2s_enable = 0 */
+ r15 &= ~PIN_MUX_I2S_ENABLE_MASK;
+ /* spi_mode = 0 */
+ r3D &= ~PIN_MUX_SPI_MODE_MASK;
+ /* mclk_en_ctrl = 0 */
+ r82 &= ~PIN_MUX_MCLK_EN_CTRL_MASK;
+ /* mperr_en_ctrl = 0 */
+ r82 &= ~PIN_MUX_MPERR_EN_CTRL_MASK;
+ /* mdval_en_ctrl = 0 */
+ r82 &= ~PIN_MUX_MDVAL_EN_CTRL_MASK;
+ /* mpsyn_en_ctrl = 0 */
+ r82 &= ~PIN_MUX_MPSYN_EN_CTRL_MASK;
+ /* mdat_en_ctrl[3:0] = 0x0 */
+ r84 &= 0x0F;
+ /* mdat_en_ctrl[7:4] = 0x0 */
+ r89 &= 0x0F;
+ break;
+ case PIN_MUX_TS_SPI_IN_MODE_1:
+ /* mpeg_mode = 0 */
+ r17 &= ~PIN_MUX_MPEG_MODE_MASK;
+ /* mpeg_par_en = 0 */
+ r18 &= ~PIN_MUX_MPEG_PAR_EN_MASK;
+ /* mpeg_ser_en = 1 */
+ r18 |= PIN_MUX_MPEG_SER_EN_MASK;
+ /* mpg_in_mux = 1 */
+ r3D |= PIN_MUX_MPG_IN_MUX_MASK;
+ /* bt656_enable = 0 */
+ r12 &= ~PIN_MUX_BT656_ENABLE_MASK;
+ /* i2s_enable = 1 */
+ r15 |= PIN_MUX_I2S_ENABLE_MASK;
+ /* spi_mode = 1 */
+ r3D |= PIN_MUX_SPI_MODE_MASK;
+ /* mclk_en_ctrl = 0 */
+ r82 &= ~PIN_MUX_MCLK_EN_CTRL_MASK;
+ /* mperr_en_ctrl = 0 */
+ r82 &= ~PIN_MUX_MPERR_EN_CTRL_MASK;
+ /* mdval_en_ctrl = 0 */
+ r82 &= ~PIN_MUX_MDVAL_EN_CTRL_MASK;
+ /* mpsyn_en_ctrl = 0 */
+ r82 &= ~PIN_MUX_MPSYN_EN_CTRL_MASK;
+ /* mdat_en_ctrl[3:0] = 0x0 */
+ r84 &= 0x0F;
+ /* mdat_en_ctrl[7:4] = 0x0 */
+ r89 &= 0x0F;
+ break;
+ case PIN_MUX_TS_SPI_IN_MODE_0:
+ /* mpeg_mode = 0 */
+ r17 &= ~PIN_MUX_MPEG_MODE_MASK;
+ /* mpeg_par_en = 0 */
+ r18 &= ~PIN_MUX_MPEG_PAR_EN_MASK;
+ /* mpeg_ser_en = 1 */
+ r18 |= PIN_MUX_MPEG_SER_EN_MASK;
+ /* mpg_in_mux = 0 */
+ r3D &= ~PIN_MUX_MPG_IN_MUX_MASK;
+ /* bt656_enable = 0 */
+ r12 &= ~PIN_MUX_BT656_ENABLE_MASK;
+ /* i2s_enable = 1 */
+ r15 |= PIN_MUX_I2S_ENABLE_MASK;
+ /* spi_mode = 1 */
+ r3D |= PIN_MUX_SPI_MODE_MASK;
+ /* mclk_en_ctrl = 0 */
+ r82 &= ~PIN_MUX_MCLK_EN_CTRL_MASK;
+ /* mperr_en_ctrl = 0 */
+ r82 &= ~PIN_MUX_MPERR_EN_CTRL_MASK;
+ /* mdval_en_ctrl = 0 */
+ r82 &= ~PIN_MUX_MDVAL_EN_CTRL_MASK;
+ /* mpsyn_en_ctrl = 0 */
+ r82 &= ~PIN_MUX_MPSYN_EN_CTRL_MASK;
+ /* mdat_en_ctrl[3:0] = 0x0 */
+ r84 &= 0x0F;
+ /* mdat_en_ctrl[7:4] = 0x0 */
+ r89 &= 0x0F;
+ break;
+ case PIN_MUX_TS_PARALLEL_IN:
+ /* mpeg_mode = 0 */
+ r17 &= ~PIN_MUX_MPEG_MODE_MASK;
+ /* mpeg_par_en = 1 */
+ r18 |= PIN_MUX_MPEG_PAR_EN_MASK;
+ /* mpeg_ser_en = 0 */
+ r18 &= ~PIN_MUX_MPEG_SER_EN_MASK;
+ /* mpg_in_mux = 0 */
+ r3D &= ~PIN_MUX_MPG_IN_MUX_MASK;
+ /* bt656_enable = 0 */
+ r12 &= ~PIN_MUX_BT656_ENABLE_MASK;
+ /* i2s_enable = 0 */
+ r15 &= ~PIN_MUX_I2S_ENABLE_MASK;
+ /* spi_mode = 0 */
+ r3D &= ~PIN_MUX_SPI_MODE_MASK;
+ /* mclk_en_ctrl = 0 */
+ r82 &= ~PIN_MUX_MCLK_EN_CTRL_MASK;
+ /* mperr_en_ctrl = 0 */
+ r82 &= ~PIN_MUX_MPERR_EN_CTRL_MASK;
+ /* mdval_en_ctrl = 0 */
+ r82 &= ~PIN_MUX_MDVAL_EN_CTRL_MASK;
+ /* mpsyn_en_ctrl = 0 */
+ r82 &= ~PIN_MUX_MPSYN_EN_CTRL_MASK;
+ /* mdat_en_ctrl[3:0] = 0x0 */
+ r84 &= 0x0F;
+ /* mdat_en_ctrl[7:4] = 0x0 */
+ r89 &= 0x0F;
+ break;
+ case PIN_MUX_BT656_I2S_MODE:
+ /* mpeg_mode = 0 */
+ r17 &= ~PIN_MUX_MPEG_MODE_MASK;
+ /* mpeg_par_en = 0 */
+ r18 &= ~PIN_MUX_MPEG_PAR_EN_MASK;
+ /* mpeg_ser_en = 0 */
+ r18 &= ~PIN_MUX_MPEG_SER_EN_MASK;
+ /* mpg_in_mux = 0 */
+ r3D &= ~PIN_MUX_MPG_IN_MUX_MASK;
+ /* bt656_enable = 1 */
+ r12 |= PIN_MUX_BT656_ENABLE_MASK;
+ /* i2s_enable = 1 */
+ r15 |= PIN_MUX_I2S_ENABLE_MASK;
+ /* spi_mode = 0 */
+ r3D &= ~PIN_MUX_SPI_MODE_MASK;
+ /* mclk_en_ctrl = 0 */
+ r82 &= ~PIN_MUX_MCLK_EN_CTRL_MASK;
+ /* mperr_en_ctrl = 0 */
+ r82 &= ~PIN_MUX_MPERR_EN_CTRL_MASK;
+ /* mdval_en_ctrl = 0 */
+ r82 &= ~PIN_MUX_MDVAL_EN_CTRL_MASK;
+ /* mpsyn_en_ctrl = 0 */
+ r82 &= ~PIN_MUX_MPSYN_EN_CTRL_MASK;
+ /* mdat_en_ctrl[3:0] = 0x0 */
+ r84 &= 0x0F;
+ /* mdat_en_ctrl[7:4] = 0x0 */
+ r89 &= 0x0F;
+ break;
+ case PIN_MUX_DEFAULT:
+ default:
+ /* mpeg_mode = 1 */
+ r17 |= PIN_MUX_MPEG_MODE_MASK;
+ /* mpeg_par_en = 0 */
+ r18 &= ~PIN_MUX_MPEG_PAR_EN_MASK;
+ /* mpeg_ser_en = 0 */
+ r18 &= ~PIN_MUX_MPEG_SER_EN_MASK;
+ /* mpg_in_mux = 0 */
+ r3D &= ~PIN_MUX_MPG_IN_MUX_MASK;
+ /* bt656_enable = 0 */
+ r12 &= ~PIN_MUX_BT656_ENABLE_MASK;
+ /* i2s_enable = 0 */
+ r15 &= ~PIN_MUX_I2S_ENABLE_MASK;
+ /* spi_mode = 0 */
+ r3D &= ~PIN_MUX_SPI_MODE_MASK;
+ /* mclk_en_ctrl = 0 */
+ r82 &= ~PIN_MUX_MCLK_EN_CTRL_MASK;
+ /* mperr_en_ctrl = 0 */
+ r82 &= ~PIN_MUX_MPERR_EN_CTRL_MASK;
+ /* mdval_en_ctrl = 0 */
+ r82 &= ~PIN_MUX_MDVAL_EN_CTRL_MASK;
+ /* mpsyn_en_ctrl = 0 */
+ r82 &= ~PIN_MUX_MPSYN_EN_CTRL_MASK;
+ /* mdat_en_ctrl[3:0] = 0x0 */
+ r84 &= 0x0F;
+ /* mdat_en_ctrl[7:4] = 0x0 */
+ r89 &= 0x0F;
+ break;
+ }
+
+ ret = mxl111sf_write_reg(state, 0x17, r17);
+ if (mxl_fail(ret))
+ goto fail;
+ ret = mxl111sf_write_reg(state, 0x18, r18);
+ if (mxl_fail(ret))
+ goto fail;
+ ret = mxl111sf_write_reg(state, 0x12, r12);
+ if (mxl_fail(ret))
+ goto fail;
+ ret = mxl111sf_write_reg(state, 0x15, r15);
+ if (mxl_fail(ret))
+ goto fail;
+ ret = mxl111sf_write_reg(state, 0x82, r82);
+ if (mxl_fail(ret))
+ goto fail;
+ ret = mxl111sf_write_reg(state, 0x84, r84);
+ if (mxl_fail(ret))
+ goto fail;
+ ret = mxl111sf_write_reg(state, 0x89, r89);
+ if (mxl_fail(ret))
+ goto fail;
+ ret = mxl111sf_write_reg(state, 0x3D, r3D);
+ if (mxl_fail(ret))
+ goto fail;
+fail:
+ return ret;
+}
+
+/* ------------------------------------------------------------------------- */
+
+static int mxl111sf_hw_set_gpio(struct mxl111sf_state *state, int gpio, int val)
+{
+ return mxl111sf_hw_do_set_gpio(state, gpio, MXL_GPIO_DIR_OUTPUT, val);
+}
+
+static int mxl111sf_hw_gpio_initialize(struct mxl111sf_state *state)
+{
+ u8 gpioval = 0x07; /* write protect enabled, signal LEDs off */
+ int i, ret;
+
+ mxl_debug("()");
+
+ for (i = 3; i < 8; i++) {
+ ret = mxl111sf_hw_set_gpio(state, i, (gpioval >> i) & 0x01);
+ if (mxl_fail(ret))
+ break;
+ }
+
+ return ret;
+}
+
+#define PCA9534_I2C_ADDR (0x40 >> 1)
+static int pca9534_set_gpio(struct mxl111sf_state *state, int gpio, int val)
+{
+ u8 w[2] = { 1, 0 };
+ u8 r = 0;
+ struct i2c_msg msg[] = {
+ { .addr = PCA9534_I2C_ADDR,
+ .flags = 0, .buf = w, .len = 1 },
+ { .addr = PCA9534_I2C_ADDR,
+ .flags = I2C_M_RD, .buf = &r, .len = 1 },
+ };
+
+ mxl_debug("(%d, %d)", gpio, val);
+
+ /* read current GPIO levels from flip-flop */
+ i2c_transfer(&state->d->i2c_adap, msg, 2);
+
+ /* prepare write buffer with current GPIO levels */
+ msg[0].len = 2;
+#if 0
+ w[0] = 1;
+#endif
+ w[1] = r;
+
+ /* clear the desired GPIO */
+ w[1] &= ~(1 << gpio);
+
+ /* set the desired GPIO value */
+ w[1] |= ((val ? 1 : 0) << gpio);
+
+ /* write new GPIO levels to flip-flop */
+ i2c_transfer(&state->d->i2c_adap, &msg[0], 1);
+
+ return 0;
+}
+
+static int pca9534_init_port_expander(struct mxl111sf_state *state)
+{
+ u8 w[2] = { 1, 0x07 }; /* write protect enabled, signal LEDs off */
+
+ struct i2c_msg msg = {
+ .addr = PCA9534_I2C_ADDR,
+ .flags = 0, .buf = w, .len = 2
+ };
+
+ mxl_debug("()");
+
+ i2c_transfer(&state->d->i2c_adap, &msg, 1);
+
+ /* configure all pins as outputs */
+ w[0] = 3;
+ w[1] = 0;
+
+ i2c_transfer(&state->d->i2c_adap, &msg, 1);
+
+ return 0;
+}
+
+int mxl111sf_set_gpio(struct mxl111sf_state *state, int gpio, int val)
+{
+ mxl_debug("(%d, %d)", gpio, val);
+
+ switch (state->gpio_port_expander) {
+ default:
+ mxl_printk(KERN_ERR,
+ "gpio_port_expander undefined, assuming PCA9534");
+ /* fall-thru */
+ case mxl111sf_PCA9534:
+ return pca9534_set_gpio(state, gpio, val);
+ case mxl111sf_gpio_hw:
+ return mxl111sf_hw_set_gpio(state, gpio, val);
+ }
+}
+
+static int mxl111sf_probe_port_expander(struct mxl111sf_state *state)
+{
+ int ret;
+ u8 w = 1;
+ u8 r = 0;
+ struct i2c_msg msg[] = {
+ { .flags = 0, .buf = &w, .len = 1 },
+ { .flags = I2C_M_RD, .buf = &r, .len = 1 },
+ };
+
+ mxl_debug("()");
+
+ msg[0].addr = 0x70 >> 1;
+ msg[1].addr = 0x70 >> 1;
+
+ /* read current GPIO levels from flip-flop */
+ ret = i2c_transfer(&state->d->i2c_adap, msg, 2);
+ if (ret == 2) {
+ state->port_expander_addr = msg[0].addr;
+ state->gpio_port_expander = mxl111sf_PCA9534;
+ mxl_debug("found port expander at 0x%02x",
+ state->port_expander_addr);
+ return 0;
+ }
+
+ msg[0].addr = 0x40 >> 1;
+ msg[1].addr = 0x40 >> 1;
+
+ ret = i2c_transfer(&state->d->i2c_adap, msg, 2);
+ if (ret == 2) {
+ state->port_expander_addr = msg[0].addr;
+ state->gpio_port_expander = mxl111sf_PCA9534;
+ mxl_debug("found port expander at 0x%02x",
+ state->port_expander_addr);
+ return 0;
+ }
+ state->port_expander_addr = 0xff;
+ state->gpio_port_expander = mxl111sf_gpio_hw;
+ mxl_debug("using hardware gpio");
+ return 0;
+}
+
+int mxl111sf_init_port_expander(struct mxl111sf_state *state)
+{
+ mxl_debug("()");
+
+ if (0x00 == state->port_expander_addr)
+ mxl111sf_probe_port_expander(state);
+
+ switch (state->gpio_port_expander) {
+ default:
+ mxl_printk(KERN_ERR,
+ "gpio_port_expander undefined, assuming PCA9534");
+ /* fall-thru */
+ case mxl111sf_PCA9534:
+ return pca9534_init_port_expander(state);
+ case mxl111sf_gpio_hw:
+ return mxl111sf_hw_gpio_initialize(state);
+ }
+}
+
+/* ------------------------------------------------------------------------ */
+
+int mxl111sf_gpio_mode_switch(struct mxl111sf_state *state, unsigned int mode)
+{
+/* GPO:
+ * 3 - ATSC/MH# | 1 = ATSC transport, 0 = MH transport | default 0
+ * 4 - ATSC_RST## | 1 = ATSC enable, 0 = ATSC Reset | default 0
+ * 5 - ATSC_EN | 1 = ATSC power enable, 0 = ATSC power off | default 0
+ * 6 - MH_RESET# | 1 = MH enable, 0 = MH Reset | default 0
+ * 7 - MH_EN | 1 = MH power enable, 0 = MH power off | default 0
+ */
+ mxl_debug("(%d)", mode);
+
+ switch (mode) {
+ case MXL111SF_GPIO_MOD_MH:
+ mxl111sf_set_gpio(state, 4, 0);
+ mxl111sf_set_gpio(state, 5, 0);
+ msleep(50);
+ mxl111sf_set_gpio(state, 7, 1);
+ msleep(50);
+ mxl111sf_set_gpio(state, 6, 1);
+ msleep(50);
+
+ mxl111sf_set_gpio(state, 3, 0);
+ break;
+ case MXL111SF_GPIO_MOD_ATSC:
+ mxl111sf_set_gpio(state, 6, 0);
+ mxl111sf_set_gpio(state, 7, 0);
+ msleep(50);
+ mxl111sf_set_gpio(state, 5, 1);
+ msleep(50);
+ mxl111sf_set_gpio(state, 4, 1);
+ msleep(50);
+ mxl111sf_set_gpio(state, 3, 1);
+ break;
+ default: /* DVBT / STANDBY */
+ mxl111sf_init_port_expander(state);
+ break;
+ }
+ return 0;
+}
diff --git a/kernel/drivers/media/usb/dvb-usb-v2/mxl111sf-gpio.h b/kernel/drivers/media/usb/dvb-usb-v2/mxl111sf-gpio.h
new file mode 100644
index 000000000..16fa4d4da
--- /dev/null
+++ b/kernel/drivers/media/usb/dvb-usb-v2/mxl111sf-gpio.h
@@ -0,0 +1,50 @@
+/*
+ * mxl111sf-gpio.h - driver for the MaxLinear MXL111SF
+ *
+ * Copyright (C) 2010-2014 Michael Krufky <mkrufky@linuxtv.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef _DVB_USB_MXL111SF_GPIO_H_
+#define _DVB_USB_MXL111SF_GPIO_H_
+
+#include "mxl111sf.h"
+
+int mxl111sf_set_gpio(struct mxl111sf_state *state, int gpio, int val);
+int mxl111sf_init_port_expander(struct mxl111sf_state *state);
+
+#define MXL111SF_GPIO_MOD_DVBT 0
+#define MXL111SF_GPIO_MOD_MH 1
+#define MXL111SF_GPIO_MOD_ATSC 2
+int mxl111sf_gpio_mode_switch(struct mxl111sf_state *state, unsigned int mode);
+
+enum mxl111sf_mux_config {
+ PIN_MUX_DEFAULT = 0,
+ PIN_MUX_TS_OUT_PARALLEL,
+ PIN_MUX_TS_OUT_SERIAL,
+ PIN_MUX_GPIO_MODE,
+ PIN_MUX_TS_SERIAL_IN_MODE_0,
+ PIN_MUX_TS_SERIAL_IN_MODE_1,
+ PIN_MUX_TS_SPI_IN_MODE_0,
+ PIN_MUX_TS_SPI_IN_MODE_1,
+ PIN_MUX_TS_PARALLEL_IN,
+ PIN_MUX_BT656_I2S_MODE,
+};
+
+int mxl111sf_config_pin_mux_modes(struct mxl111sf_state *state,
+ enum mxl111sf_mux_config pin_mux_config);
+
+#endif /* _DVB_USB_MXL111SF_GPIO_H_ */
diff --git a/kernel/drivers/media/usb/dvb-usb-v2/mxl111sf-i2c.c b/kernel/drivers/media/usb/dvb-usb-v2/mxl111sf-i2c.c
new file mode 100644
index 000000000..283495c84
--- /dev/null
+++ b/kernel/drivers/media/usb/dvb-usb-v2/mxl111sf-i2c.c
@@ -0,0 +1,844 @@
+/*
+ * mxl111sf-i2c.c - driver for the MaxLinear MXL111SF
+ *
+ * Copyright (C) 2010-2014 Michael Krufky <mkrufky@linuxtv.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include "mxl111sf-i2c.h"
+#include "mxl111sf.h"
+
+/* SW-I2C ----------------------------------------------------------------- */
+
+#define SW_I2C_ADDR 0x1a
+#define SW_I2C_EN 0x02
+#define SW_SCL_OUT 0x04
+#define SW_SDA_OUT 0x08
+#define SW_SDA_IN 0x04
+
+#define SW_I2C_BUSY_ADDR 0x2f
+#define SW_I2C_BUSY 0x02
+
+static int mxl111sf_i2c_bitbang_sendbyte(struct mxl111sf_state *state,
+ u8 byte)
+{
+ int i, ret;
+ u8 data = 0;
+
+ mxl_i2c("(0x%02x)", byte);
+
+ ret = mxl111sf_read_reg(state, SW_I2C_BUSY_ADDR, &data);
+ if (mxl_fail(ret))
+ goto fail;
+
+ for (i = 0; i < 8; i++) {
+
+ data = (byte & (0x80 >> i)) ? SW_SDA_OUT : 0;
+
+ ret = mxl111sf_write_reg(state, SW_I2C_ADDR,
+ 0x10 | SW_I2C_EN | data);
+ if (mxl_fail(ret))
+ goto fail;
+
+ ret = mxl111sf_write_reg(state, SW_I2C_ADDR,
+ 0x10 | SW_I2C_EN | data | SW_SCL_OUT);
+ if (mxl_fail(ret))
+ goto fail;
+
+ ret = mxl111sf_write_reg(state, SW_I2C_ADDR,
+ 0x10 | SW_I2C_EN | data);
+ if (mxl_fail(ret))
+ goto fail;
+ }
+
+ /* last bit was 0 so we need to release SDA */
+ if (!(byte & 1)) {
+ ret = mxl111sf_write_reg(state, SW_I2C_ADDR,
+ 0x10 | SW_I2C_EN | SW_SDA_OUT);
+ if (mxl_fail(ret))
+ goto fail;
+ }
+
+ /* CLK high for ACK readback */
+ ret = mxl111sf_write_reg(state, SW_I2C_ADDR,
+ 0x10 | SW_I2C_EN | SW_SCL_OUT | SW_SDA_OUT);
+ if (mxl_fail(ret))
+ goto fail;
+
+ ret = mxl111sf_read_reg(state, SW_I2C_BUSY_ADDR, &data);
+ if (mxl_fail(ret))
+ goto fail;
+
+ /* drop the CLK after getting ACK, SDA will go high right away */
+ ret = mxl111sf_write_reg(state, SW_I2C_ADDR,
+ 0x10 | SW_I2C_EN | SW_SDA_OUT);
+ if (mxl_fail(ret))
+ goto fail;
+
+ if (data & SW_SDA_IN)
+ ret = -EIO;
+fail:
+ return ret;
+}
+
+static int mxl111sf_i2c_bitbang_recvbyte(struct mxl111sf_state *state,
+ u8 *pbyte)
+{
+ int i, ret;
+ u8 byte = 0;
+ u8 data = 0;
+
+ mxl_i2c("()");
+
+ *pbyte = 0;
+
+ ret = mxl111sf_write_reg(state, SW_I2C_ADDR,
+ 0x10 | SW_I2C_EN | SW_SDA_OUT);
+ if (mxl_fail(ret))
+ goto fail;
+
+ for (i = 0; i < 8; i++) {
+ ret = mxl111sf_write_reg(state, SW_I2C_ADDR,
+ 0x10 | SW_I2C_EN |
+ SW_SCL_OUT | SW_SDA_OUT);
+ if (mxl_fail(ret))
+ goto fail;
+
+ ret = mxl111sf_read_reg(state, SW_I2C_BUSY_ADDR, &data);
+ if (mxl_fail(ret))
+ goto fail;
+
+ if (data & SW_SDA_IN)
+ byte |= (0x80 >> i);
+
+ ret = mxl111sf_write_reg(state, SW_I2C_ADDR,
+ 0x10 | SW_I2C_EN | SW_SDA_OUT);
+ if (mxl_fail(ret))
+ goto fail;
+ }
+ *pbyte = byte;
+fail:
+ return ret;
+}
+
+static int mxl111sf_i2c_start(struct mxl111sf_state *state)
+{
+ int ret;
+
+ mxl_i2c("()");
+
+ ret = mxl111sf_write_reg(state, SW_I2C_ADDR,
+ 0x10 | SW_I2C_EN | SW_SCL_OUT | SW_SDA_OUT);
+ if (mxl_fail(ret))
+ goto fail;
+
+ ret = mxl111sf_write_reg(state, SW_I2C_ADDR,
+ 0x10 | SW_I2C_EN | SW_SCL_OUT);
+ if (mxl_fail(ret))
+ goto fail;
+
+ ret = mxl111sf_write_reg(state, SW_I2C_ADDR,
+ 0x10 | SW_I2C_EN); /* start */
+ mxl_fail(ret);
+fail:
+ return ret;
+}
+
+static int mxl111sf_i2c_stop(struct mxl111sf_state *state)
+{
+ int ret;
+
+ mxl_i2c("()");
+
+ ret = mxl111sf_write_reg(state, SW_I2C_ADDR,
+ 0x10 | SW_I2C_EN); /* stop */
+ if (mxl_fail(ret))
+ goto fail;
+
+ ret = mxl111sf_write_reg(state, SW_I2C_ADDR,
+ 0x10 | SW_I2C_EN | SW_SCL_OUT);
+ if (mxl_fail(ret))
+ goto fail;
+
+ ret = mxl111sf_write_reg(state, SW_I2C_ADDR,
+ 0x10 | SW_I2C_EN | SW_SCL_OUT | SW_SDA_OUT);
+ if (mxl_fail(ret))
+ goto fail;
+
+ ret = mxl111sf_write_reg(state, SW_I2C_ADDR,
+ 0x10 | SW_SCL_OUT | SW_SDA_OUT);
+ mxl_fail(ret);
+fail:
+ return ret;
+}
+
+static int mxl111sf_i2c_ack(struct mxl111sf_state *state)
+{
+ int ret;
+ u8 b = 0;
+
+ mxl_i2c("()");
+
+ ret = mxl111sf_read_reg(state, SW_I2C_BUSY_ADDR, &b);
+ if (mxl_fail(ret))
+ goto fail;
+
+ ret = mxl111sf_write_reg(state, SW_I2C_ADDR,
+ 0x10 | SW_I2C_EN);
+ if (mxl_fail(ret))
+ goto fail;
+
+ /* pull SDA low */
+ ret = mxl111sf_write_reg(state, SW_I2C_ADDR,
+ 0x10 | SW_I2C_EN | SW_SCL_OUT);
+ if (mxl_fail(ret))
+ goto fail;
+
+ ret = mxl111sf_write_reg(state, SW_I2C_ADDR,
+ 0x10 | SW_I2C_EN | SW_SDA_OUT);
+ mxl_fail(ret);
+fail:
+ return ret;
+}
+
+static int mxl111sf_i2c_nack(struct mxl111sf_state *state)
+{
+ int ret;
+
+ mxl_i2c("()");
+
+ /* SDA high to signal last byte read from slave */
+ ret = mxl111sf_write_reg(state, SW_I2C_ADDR,
+ 0x10 | SW_I2C_EN | SW_SCL_OUT | SW_SDA_OUT);
+ if (mxl_fail(ret))
+ goto fail;
+
+ ret = mxl111sf_write_reg(state, SW_I2C_ADDR,
+ 0x10 | SW_I2C_EN | SW_SDA_OUT);
+ mxl_fail(ret);
+fail:
+ return ret;
+}
+
+/* ------------------------------------------------------------------------ */
+
+static int mxl111sf_i2c_sw_xfer_msg(struct mxl111sf_state *state,
+ struct i2c_msg *msg)
+{
+ int i, ret;
+
+ mxl_i2c("()");
+
+ if (msg->flags & I2C_M_RD) {
+
+ ret = mxl111sf_i2c_start(state);
+ if (mxl_fail(ret))
+ goto fail;
+
+ ret = mxl111sf_i2c_bitbang_sendbyte(state,
+ (msg->addr << 1) | 0x01);
+ if (mxl_fail(ret)) {
+ mxl111sf_i2c_stop(state);
+ goto fail;
+ }
+
+ for (i = 0; i < msg->len; i++) {
+ ret = mxl111sf_i2c_bitbang_recvbyte(state,
+ &msg->buf[i]);
+ if (mxl_fail(ret)) {
+ mxl111sf_i2c_stop(state);
+ goto fail;
+ }
+
+ if (i < msg->len - 1)
+ mxl111sf_i2c_ack(state);
+ }
+
+ mxl111sf_i2c_nack(state);
+
+ ret = mxl111sf_i2c_stop(state);
+ if (mxl_fail(ret))
+ goto fail;
+
+ } else {
+
+ ret = mxl111sf_i2c_start(state);
+ if (mxl_fail(ret))
+ goto fail;
+
+ ret = mxl111sf_i2c_bitbang_sendbyte(state,
+ (msg->addr << 1) & 0xfe);
+ if (mxl_fail(ret)) {
+ mxl111sf_i2c_stop(state);
+ goto fail;
+ }
+
+ for (i = 0; i < msg->len; i++) {
+ ret = mxl111sf_i2c_bitbang_sendbyte(state,
+ msg->buf[i]);
+ if (mxl_fail(ret)) {
+ mxl111sf_i2c_stop(state);
+ goto fail;
+ }
+ }
+
+ /* FIXME: we only want to do this on the last transaction */
+ mxl111sf_i2c_stop(state);
+ }
+fail:
+ return ret;
+}
+
+/* HW-I2C ----------------------------------------------------------------- */
+
+#define USB_WRITE_I2C_CMD 0x99
+#define USB_READ_I2C_CMD 0xdd
+#define USB_END_I2C_CMD 0xfe
+
+#define USB_WRITE_I2C_CMD_LEN 26
+#define USB_READ_I2C_CMD_LEN 24
+
+#define I2C_MUX_REG 0x30
+#define I2C_CONTROL_REG 0x00
+#define I2C_SLAVE_ADDR_REG 0x08
+#define I2C_DATA_REG 0x0c
+#define I2C_INT_STATUS_REG 0x10
+
+static int mxl111sf_i2c_send_data(struct mxl111sf_state *state,
+ u8 index, u8 *wdata)
+{
+ int ret = mxl111sf_ctrl_msg(state->d, wdata[0],
+ &wdata[1], 25, NULL, 0);
+ mxl_fail(ret);
+
+ return ret;
+}
+
+static int mxl111sf_i2c_get_data(struct mxl111sf_state *state,
+ u8 index, u8 *wdata, u8 *rdata)
+{
+ int ret = mxl111sf_ctrl_msg(state->d, wdata[0],
+ &wdata[1], 25, rdata, 24);
+ mxl_fail(ret);
+
+ return ret;
+}
+
+static u8 mxl111sf_i2c_check_status(struct mxl111sf_state *state)
+{
+ u8 status = 0;
+ u8 buf[26];
+
+ mxl_i2c_adv("()");
+
+ buf[0] = USB_READ_I2C_CMD;
+ buf[1] = 0x00;
+
+ buf[2] = I2C_INT_STATUS_REG;
+ buf[3] = 0x00;
+ buf[4] = 0x00;
+
+ buf[5] = USB_END_I2C_CMD;
+
+ mxl111sf_i2c_get_data(state, 0, buf, buf);
+
+ if (buf[1] & 0x04)
+ status = 1;
+
+ return status;
+}
+
+static u8 mxl111sf_i2c_check_fifo(struct mxl111sf_state *state)
+{
+ u8 status = 0;
+ u8 buf[26];
+
+ mxl_i2c("()");
+
+ buf[0] = USB_READ_I2C_CMD;
+ buf[1] = 0x00;
+
+ buf[2] = I2C_MUX_REG;
+ buf[3] = 0x00;
+ buf[4] = 0x00;
+
+ buf[5] = I2C_INT_STATUS_REG;
+ buf[6] = 0x00;
+ buf[7] = 0x00;
+ buf[8] = USB_END_I2C_CMD;
+
+ mxl111sf_i2c_get_data(state, 0, buf, buf);
+
+ if (0x08 == (buf[1] & 0x08))
+ status = 1;
+
+ if ((buf[5] & 0x02) == 0x02)
+ mxl_i2c("(buf[5] & 0x02) == 0x02"); /* FIXME */
+
+ return status;
+}
+
+static int mxl111sf_i2c_readagain(struct mxl111sf_state *state,
+ u8 count, u8 *rbuf)
+{
+ u8 i2c_w_data[26];
+ u8 i2c_r_data[24];
+ u8 i = 0;
+ u8 fifo_status = 0;
+ int status = 0;
+
+ mxl_i2c("read %d bytes", count);
+
+ while ((fifo_status == 0) && (i++ < 5))
+ fifo_status = mxl111sf_i2c_check_fifo(state);
+
+ i2c_w_data[0] = 0xDD;
+ i2c_w_data[1] = 0x00;
+
+ for (i = 2; i < 26; i++)
+ i2c_w_data[i] = 0xFE;
+
+ for (i = 0; i < count; i++) {
+ i2c_w_data[2+(i*3)] = 0x0C;
+ i2c_w_data[3+(i*3)] = 0x00;
+ i2c_w_data[4+(i*3)] = 0x00;
+ }
+
+ mxl111sf_i2c_get_data(state, 0, i2c_w_data, i2c_r_data);
+
+ /* Check for I2C NACK status */
+ if (mxl111sf_i2c_check_status(state) == 1) {
+ mxl_i2c("error!");
+ } else {
+ for (i = 0; i < count; i++) {
+ rbuf[i] = i2c_r_data[(i*3)+1];
+ mxl_i2c("%02x\t %02x",
+ i2c_r_data[(i*3)+1],
+ i2c_r_data[(i*3)+2]);
+ }
+
+ status = 1;
+ }
+
+ return status;
+}
+
+#define HWI2C400 1
+static int mxl111sf_i2c_hw_xfer_msg(struct mxl111sf_state *state,
+ struct i2c_msg *msg)
+{
+ int i, k, ret = 0;
+ u16 index = 0;
+ u8 buf[26];
+ u8 i2c_r_data[24];
+ u16 block_len;
+ u16 left_over_len;
+ u8 rd_status[8];
+ u8 ret_status;
+ u8 readbuff[26];
+
+ mxl_i2c("addr: 0x%02x, read buff len: %d, write buff len: %d",
+ msg->addr, (msg->flags & I2C_M_RD) ? msg->len : 0,
+ (!(msg->flags & I2C_M_RD)) ? msg->len : 0);
+
+ for (index = 0; index < 26; index++)
+ buf[index] = USB_END_I2C_CMD;
+
+ /* command to indicate data payload is destined for I2C interface */
+ buf[0] = USB_WRITE_I2C_CMD;
+ buf[1] = 0x00;
+
+ /* enable I2C interface */
+ buf[2] = I2C_MUX_REG;
+ buf[3] = 0x80;
+ buf[4] = 0x00;
+
+ /* enable I2C interface */
+ buf[5] = I2C_MUX_REG;
+ buf[6] = 0x81;
+ buf[7] = 0x00;
+
+ /* set Timeout register on I2C interface */
+ buf[8] = 0x14;
+ buf[9] = 0xff;
+ buf[10] = 0x00;
+#if 0
+ /* enable Interrupts on I2C interface */
+ buf[8] = 0x24;
+ buf[9] = 0xF7;
+ buf[10] = 0x00;
+#endif
+ buf[11] = 0x24;
+ buf[12] = 0xF7;
+ buf[13] = 0x00;
+
+ ret = mxl111sf_i2c_send_data(state, 0, buf);
+
+ /* write data on I2C bus */
+ if (!(msg->flags & I2C_M_RD) && (msg->len > 0)) {
+ mxl_i2c("%d\t%02x", msg->len, msg->buf[0]);
+
+ /* control register on I2C interface to initialize I2C bus */
+ buf[2] = I2C_CONTROL_REG;
+ buf[3] = 0x5E;
+ buf[4] = (HWI2C400) ? 0x03 : 0x0D;
+
+ /* I2C Slave device Address */
+ buf[5] = I2C_SLAVE_ADDR_REG;
+ buf[6] = (msg->addr);
+ buf[7] = 0x00;
+ buf[8] = USB_END_I2C_CMD;
+ ret = mxl111sf_i2c_send_data(state, 0, buf);
+
+ /* check for slave device status */
+ if (mxl111sf_i2c_check_status(state) == 1) {
+ mxl_i2c("NACK writing slave address %02x",
+ msg->addr);
+ /* if NACK, stop I2C bus and exit */
+ buf[2] = I2C_CONTROL_REG;
+ buf[3] = 0x4E;
+ buf[4] = (HWI2C400) ? 0x03 : 0x0D;
+ ret = -EIO;
+ goto exit;
+ }
+
+ /* I2C interface can do I2C operations in block of 8 bytes of
+ I2C data. calculation to figure out number of blocks of i2c
+ data required to program */
+ block_len = (msg->len / 8);
+ left_over_len = (msg->len % 8);
+ index = 0;
+
+ mxl_i2c("block_len %d, left_over_len %d",
+ block_len, left_over_len);
+
+ for (index = 0; index < block_len; index++) {
+ for (i = 0; i < 8; i++) {
+ /* write data on I2C interface */
+ buf[2+(i*3)] = I2C_DATA_REG;
+ buf[3+(i*3)] = msg->buf[(index*8)+i];
+ buf[4+(i*3)] = 0x00;
+ }
+
+ ret = mxl111sf_i2c_send_data(state, 0, buf);
+
+ /* check for I2C NACK status */
+ if (mxl111sf_i2c_check_status(state) == 1) {
+ mxl_i2c("NACK writing slave address %02x",
+ msg->addr);
+
+ /* if NACK, stop I2C bus and exit */
+ buf[2] = I2C_CONTROL_REG;
+ buf[3] = 0x4E;
+ buf[4] = (HWI2C400) ? 0x03 : 0x0D;
+ ret = -EIO;
+ goto exit;
+ }
+
+ }
+
+ if (left_over_len) {
+ for (k = 0; k < 26; k++)
+ buf[k] = USB_END_I2C_CMD;
+
+ buf[0] = 0x99;
+ buf[1] = 0x00;
+
+ for (i = 0; i < left_over_len; i++) {
+ buf[2+(i*3)] = I2C_DATA_REG;
+ buf[3+(i*3)] = msg->buf[(index*8)+i];
+ mxl_i2c("index = %d %d data %d",
+ index, i, msg->buf[(index*8)+i]);
+ buf[4+(i*3)] = 0x00;
+ }
+ ret = mxl111sf_i2c_send_data(state, 0, buf);
+
+ /* check for I2C NACK status */
+ if (mxl111sf_i2c_check_status(state) == 1) {
+ mxl_i2c("NACK writing slave address %02x",
+ msg->addr);
+
+ /* if NACK, stop I2C bus and exit */
+ buf[2] = I2C_CONTROL_REG;
+ buf[3] = 0x4E;
+ buf[4] = (HWI2C400) ? 0x03 : 0x0D;
+ ret = -EIO;
+ goto exit;
+ }
+
+ }
+
+ /* issue I2C STOP after write */
+ buf[2] = I2C_CONTROL_REG;
+ buf[3] = 0x4E;
+ buf[4] = (HWI2C400) ? 0x03 : 0x0D;
+
+ }
+
+ /* read data from I2C bus */
+ if ((msg->flags & I2C_M_RD) && (msg->len > 0)) {
+ mxl_i2c("read buf len %d", msg->len);
+
+ /* command to indicate data payload is
+ destined for I2C interface */
+ buf[2] = I2C_CONTROL_REG;
+ buf[3] = 0xDF;
+ buf[4] = (HWI2C400) ? 0x03 : 0x0D;
+
+ /* I2C xfer length */
+ buf[5] = 0x14;
+ buf[6] = (msg->len & 0xFF);
+ buf[7] = 0;
+
+ /* I2C slave device Address */
+ buf[8] = I2C_SLAVE_ADDR_REG;
+ buf[9] = msg->addr;
+ buf[10] = 0x00;
+ buf[11] = USB_END_I2C_CMD;
+ ret = mxl111sf_i2c_send_data(state, 0, buf);
+
+ /* check for I2C NACK status */
+ if (mxl111sf_i2c_check_status(state) == 1) {
+ mxl_i2c("NACK reading slave address %02x",
+ msg->addr);
+
+ /* if NACK, stop I2C bus and exit */
+ buf[2] = I2C_CONTROL_REG;
+ buf[3] = 0xC7;
+ buf[4] = (HWI2C400) ? 0x03 : 0x0D;
+ ret = -EIO;
+ goto exit;
+ }
+
+ /* I2C interface can do I2C operations in block of 8 bytes of
+ I2C data. calculation to figure out number of blocks of
+ i2c data required to program */
+ block_len = ((msg->len) / 8);
+ left_over_len = ((msg->len) % 8);
+ index = 0;
+
+ mxl_i2c("block_len %d, left_over_len %d",
+ block_len, left_over_len);
+
+ /* command to read data from I2C interface */
+ buf[0] = USB_READ_I2C_CMD;
+ buf[1] = 0x00;
+
+ for (index = 0; index < block_len; index++) {
+ /* setup I2C read request packet on I2C interface */
+ for (i = 0; i < 8; i++) {
+ buf[2+(i*3)] = I2C_DATA_REG;
+ buf[3+(i*3)] = 0x00;
+ buf[4+(i*3)] = 0x00;
+ }
+
+ ret = mxl111sf_i2c_get_data(state, 0, buf, i2c_r_data);
+
+ /* check for I2C NACK status */
+ if (mxl111sf_i2c_check_status(state) == 1) {
+ mxl_i2c("NACK reading slave address %02x",
+ msg->addr);
+
+ /* if NACK, stop I2C bus and exit */
+ buf[2] = I2C_CONTROL_REG;
+ buf[3] = 0xC7;
+ buf[4] = (HWI2C400) ? 0x03 : 0x0D;
+ ret = -EIO;
+ goto exit;
+ }
+
+ /* copy data from i2c data payload to read buffer */
+ for (i = 0; i < 8; i++) {
+ rd_status[i] = i2c_r_data[(i*3)+2];
+
+ if (rd_status[i] == 0x04) {
+ if (i < 7) {
+ mxl_i2c("i2c fifo empty!"
+ " @ %d", i);
+ msg->buf[(index*8)+i] =
+ i2c_r_data[(i*3)+1];
+ /* read again */
+ ret_status =
+ mxl111sf_i2c_readagain(
+ state, 8-(i+1),
+ readbuff);
+ if (ret_status == 1) {
+ for (k = 0;
+ k < 8-(i+1);
+ k++) {
+
+ msg->buf[(index*8)+(k+i+1)] =
+ readbuff[k];
+ mxl_i2c("read data: %02x\t %02x",
+ msg->buf[(index*8)+(k+i)],
+ (index*8)+(k+i));
+ mxl_i2c("read data: %02x\t %02x",
+ msg->buf[(index*8)+(k+i+1)],
+ readbuff[k]);
+
+ }
+ goto stop_copy;
+ } else {
+ mxl_i2c("readagain "
+ "ERROR!");
+ }
+ } else {
+ msg->buf[(index*8)+i] =
+ i2c_r_data[(i*3)+1];
+ }
+ } else {
+ msg->buf[(index*8)+i] =
+ i2c_r_data[(i*3)+1];
+ }
+ }
+stop_copy:
+ ;
+
+ }
+
+ if (left_over_len) {
+ for (k = 0; k < 26; k++)
+ buf[k] = USB_END_I2C_CMD;
+
+ buf[0] = 0xDD;
+ buf[1] = 0x00;
+
+ for (i = 0; i < left_over_len; i++) {
+ buf[2+(i*3)] = I2C_DATA_REG;
+ buf[3+(i*3)] = 0x00;
+ buf[4+(i*3)] = 0x00;
+ }
+ ret = mxl111sf_i2c_get_data(state, 0, buf,
+ i2c_r_data);
+
+ /* check for I2C NACK status */
+ if (mxl111sf_i2c_check_status(state) == 1) {
+ mxl_i2c("NACK reading slave address %02x",
+ msg->addr);
+
+ /* if NACK, stop I2C bus and exit */
+ buf[2] = I2C_CONTROL_REG;
+ buf[3] = 0xC7;
+ buf[4] = (HWI2C400) ? 0x03 : 0x0D;
+ ret = -EIO;
+ goto exit;
+ }
+
+ for (i = 0; i < left_over_len; i++) {
+ msg->buf[(block_len*8)+i] =
+ i2c_r_data[(i*3)+1];
+ mxl_i2c("read data: %02x\t %02x",
+ i2c_r_data[(i*3)+1],
+ i2c_r_data[(i*3)+2]);
+ }
+ }
+
+ /* indicate I2C interface to issue NACK
+ after next I2C read op */
+ buf[0] = USB_WRITE_I2C_CMD;
+ buf[1] = 0x00;
+
+ /* control register */
+ buf[2] = I2C_CONTROL_REG;
+ buf[3] = 0x17;
+ buf[4] = (HWI2C400) ? 0x03 : 0x0D;
+
+ buf[5] = USB_END_I2C_CMD;
+ ret = mxl111sf_i2c_send_data(state, 0, buf);
+
+ /* control register */
+ buf[2] = I2C_CONTROL_REG;
+ buf[3] = 0xC7;
+ buf[4] = (HWI2C400) ? 0x03 : 0x0D;
+
+ }
+exit:
+ /* STOP and disable I2C MUX */
+ buf[0] = USB_WRITE_I2C_CMD;
+ buf[1] = 0x00;
+
+ /* de-initilize I2C BUS */
+ buf[5] = USB_END_I2C_CMD;
+ mxl111sf_i2c_send_data(state, 0, buf);
+
+ /* Control Register */
+ buf[2] = I2C_CONTROL_REG;
+ buf[3] = 0xDF;
+ buf[4] = 0x03;
+
+ /* disable I2C interface */
+ buf[5] = I2C_MUX_REG;
+ buf[6] = 0x00;
+ buf[7] = 0x00;
+
+ /* de-initilize I2C BUS */
+ buf[8] = USB_END_I2C_CMD;
+ mxl111sf_i2c_send_data(state, 0, buf);
+
+ /* disable I2C interface */
+ buf[2] = I2C_MUX_REG;
+ buf[3] = 0x81;
+ buf[4] = 0x00;
+
+ /* disable I2C interface */
+ buf[5] = I2C_MUX_REG;
+ buf[6] = 0x00;
+ buf[7] = 0x00;
+
+ /* disable I2C interface */
+ buf[8] = I2C_MUX_REG;
+ buf[9] = 0x00;
+ buf[10] = 0x00;
+
+ buf[11] = USB_END_I2C_CMD;
+ mxl111sf_i2c_send_data(state, 0, buf);
+
+ return ret;
+}
+
+/* ------------------------------------------------------------------------ */
+
+int mxl111sf_i2c_xfer(struct i2c_adapter *adap,
+ struct i2c_msg msg[], int num)
+{
+ struct dvb_usb_device *d = i2c_get_adapdata(adap);
+ struct mxl111sf_state *state = d->priv;
+ int hwi2c = (state->chip_rev > MXL111SF_V6);
+ int i, ret;
+
+ if (mutex_lock_interruptible(&d->i2c_mutex) < 0)
+ return -EAGAIN;
+
+ for (i = 0; i < num; i++) {
+ ret = (hwi2c) ?
+ mxl111sf_i2c_hw_xfer_msg(state, &msg[i]) :
+ mxl111sf_i2c_sw_xfer_msg(state, &msg[i]);
+ if (mxl_fail(ret)) {
+ mxl_debug_adv("failed with error %d on i2c "
+ "transaction %d of %d, %sing %d bytes "
+ "to/from 0x%02x", ret, i+1, num,
+ (msg[i].flags & I2C_M_RD) ?
+ "read" : "writ",
+ msg[i].len, msg[i].addr);
+
+ break;
+ }
+ }
+
+ mutex_unlock(&d->i2c_mutex);
+
+ return i == num ? num : -EREMOTEIO;
+}
diff --git a/kernel/drivers/media/usb/dvb-usb-v2/mxl111sf-i2c.h b/kernel/drivers/media/usb/dvb-usb-v2/mxl111sf-i2c.h
new file mode 100644
index 000000000..c486fe02f
--- /dev/null
+++ b/kernel/drivers/media/usb/dvb-usb-v2/mxl111sf-i2c.h
@@ -0,0 +1,29 @@
+/*
+ * mxl111sf-i2c.h - driver for the MaxLinear MXL111SF
+ *
+ * Copyright (C) 2010-2014 Michael Krufky <mkrufky@linuxtv.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef _DVB_USB_MXL111SF_I2C_H_
+#define _DVB_USB_MXL111SF_I2C_H_
+
+#include <linux/i2c.h>
+
+int mxl111sf_i2c_xfer(struct i2c_adapter *adap,
+ struct i2c_msg msg[], int num);
+
+#endif /* _DVB_USB_MXL111SF_I2C_H_ */
diff --git a/kernel/drivers/media/usb/dvb-usb-v2/mxl111sf-phy.c b/kernel/drivers/media/usb/dvb-usb-v2/mxl111sf-phy.c
new file mode 100644
index 000000000..5b0191178
--- /dev/null
+++ b/kernel/drivers/media/usb/dvb-usb-v2/mxl111sf-phy.c
@@ -0,0 +1,337 @@
+/*
+ * mxl111sf-phy.c - driver for the MaxLinear MXL111SF
+ *
+ * Copyright (C) 2010-2014 Michael Krufky <mkrufky@linuxtv.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include "mxl111sf-phy.h"
+#include "mxl111sf-reg.h"
+
+int mxl111sf_init_tuner_demod(struct mxl111sf_state *state)
+{
+ struct mxl111sf_reg_ctrl_info mxl_111_overwrite_default[] = {
+ {0x07, 0xff, 0x0c},
+ {0x58, 0xff, 0x9d},
+ {0x09, 0xff, 0x00},
+ {0x06, 0xff, 0x06},
+ {0xc8, 0xff, 0x40}, /* ED_LE_WIN_OLD = 0 */
+ {0x8d, 0x01, 0x01}, /* NEGATE_Q */
+ {0x32, 0xff, 0xac}, /* DIG_RFREFSELECT = 12 */
+ {0x42, 0xff, 0x43}, /* DIG_REG_AMP = 4 */
+ {0x74, 0xff, 0xc4}, /* SSPUR_FS_PRIO = 4 */
+ {0x71, 0xff, 0xe6}, /* SPUR_ROT_PRIO_VAL = 1 */
+ {0x83, 0xff, 0x64}, /* INF_FILT1_THD_SC = 100 */
+ {0x85, 0xff, 0x64}, /* INF_FILT2_THD_SC = 100 */
+ {0x88, 0xff, 0xf0}, /* INF_THD = 240 */
+ {0x6f, 0xf0, 0xb0}, /* DFE_DLY = 11 */
+ {0x00, 0xff, 0x01}, /* Change to page 1 */
+ {0x81, 0xff, 0x11}, /* DSM_FERR_BYPASS = 1 */
+ {0xf4, 0xff, 0x07}, /* DIG_FREQ_CORR = 1 */
+ {0xd4, 0x1f, 0x0f}, /* SPUR_TEST_NOISE_TH = 15 */
+ {0xd6, 0xff, 0x0c}, /* SPUR_TEST_NOISE_PAPR = 12 */
+ {0x00, 0xff, 0x00}, /* Change to page 0 */
+ {0, 0, 0}
+ };
+
+ mxl_debug("()");
+
+ return mxl111sf_ctrl_program_regs(state, mxl_111_overwrite_default);
+}
+
+int mxl1x1sf_soft_reset(struct mxl111sf_state *state)
+{
+ int ret;
+ mxl_debug("()");
+
+ ret = mxl111sf_write_reg(state, 0xff, 0x00); /* AIC */
+ if (mxl_fail(ret))
+ goto fail;
+ ret = mxl111sf_write_reg(state, 0x02, 0x01); /* get out of reset */
+ mxl_fail(ret);
+fail:
+ return ret;
+}
+
+int mxl1x1sf_set_device_mode(struct mxl111sf_state *state, int mode)
+{
+ int ret;
+
+ mxl_debug("(%s)", MXL_SOC_MODE == mode ?
+ "MXL_SOC_MODE" : "MXL_TUNER_MODE");
+
+ /* set device mode */
+ ret = mxl111sf_write_reg(state, 0x03,
+ MXL_SOC_MODE == mode ? 0x01 : 0x00);
+ if (mxl_fail(ret))
+ goto fail;
+
+ ret = mxl111sf_write_reg_mask(state,
+ 0x7d, 0x40, MXL_SOC_MODE == mode ?
+ 0x00 : /* enable impulse noise filter,
+ INF_BYP = 0 */
+ 0x40); /* disable impulse noise filter,
+ INF_BYP = 1 */
+ if (mxl_fail(ret))
+ goto fail;
+
+ state->device_mode = mode;
+fail:
+ return ret;
+}
+
+/* power up tuner */
+int mxl1x1sf_top_master_ctrl(struct mxl111sf_state *state, int onoff)
+{
+ mxl_debug("(%d)", onoff);
+
+ return mxl111sf_write_reg(state, 0x01, onoff ? 0x01 : 0x00);
+}
+
+int mxl111sf_disable_656_port(struct mxl111sf_state *state)
+{
+ mxl_debug("()");
+
+ return mxl111sf_write_reg_mask(state, 0x12, 0x04, 0x00);
+}
+
+int mxl111sf_enable_usb_output(struct mxl111sf_state *state)
+{
+ mxl_debug("()");
+
+ return mxl111sf_write_reg_mask(state, 0x17, 0x40, 0x00);
+}
+
+/* initialize TSIF as input port of MxL1X1SF for MPEG2 data transfer */
+int mxl111sf_config_mpeg_in(struct mxl111sf_state *state,
+ unsigned int parallel_serial,
+ unsigned int msb_lsb_1st,
+ unsigned int clock_phase,
+ unsigned int mpeg_valid_pol,
+ unsigned int mpeg_sync_pol)
+{
+ int ret;
+ u8 mode, tmp;
+
+ mxl_debug("(%u,%u,%u,%u,%u)", parallel_serial, msb_lsb_1st,
+ clock_phase, mpeg_valid_pol, mpeg_sync_pol);
+
+ /* Enable PIN MUX */
+ ret = mxl111sf_write_reg(state, V6_PIN_MUX_MODE_REG, V6_ENABLE_PIN_MUX);
+ mxl_fail(ret);
+
+ /* Configure MPEG Clock phase */
+ mxl111sf_read_reg(state, V6_MPEG_IN_CLK_INV_REG, &mode);
+
+ if (clock_phase == TSIF_NORMAL)
+ mode &= ~V6_INVERTED_CLK_PHASE;
+ else
+ mode |= V6_INVERTED_CLK_PHASE;
+
+ ret = mxl111sf_write_reg(state, V6_MPEG_IN_CLK_INV_REG, mode);
+ mxl_fail(ret);
+
+ /* Configure data input mode, MPEG Valid polarity, MPEG Sync polarity
+ * Get current configuration */
+ ret = mxl111sf_read_reg(state, V6_MPEG_IN_CTRL_REG, &mode);
+ mxl_fail(ret);
+
+ /* Data Input mode */
+ if (parallel_serial == TSIF_INPUT_PARALLEL) {
+ /* Disable serial mode */
+ mode &= ~V6_MPEG_IN_DATA_SERIAL;
+
+ /* Enable Parallel mode */
+ mode |= V6_MPEG_IN_DATA_PARALLEL;
+ } else {
+ /* Disable Parallel mode */
+ mode &= ~V6_MPEG_IN_DATA_PARALLEL;
+
+ /* Enable Serial Mode */
+ mode |= V6_MPEG_IN_DATA_SERIAL;
+
+ /* If serial interface is chosen, configure
+ MSB or LSB order in transmission */
+ ret = mxl111sf_read_reg(state,
+ V6_MPEG_INOUT_BIT_ORDER_CTRL_REG,
+ &tmp);
+ mxl_fail(ret);
+
+ if (msb_lsb_1st == MPEG_SER_MSB_FIRST_ENABLED)
+ tmp |= V6_MPEG_SER_MSB_FIRST;
+ else
+ tmp &= ~V6_MPEG_SER_MSB_FIRST;
+
+ ret = mxl111sf_write_reg(state,
+ V6_MPEG_INOUT_BIT_ORDER_CTRL_REG,
+ tmp);
+ mxl_fail(ret);
+ }
+
+ /* MPEG Sync polarity */
+ if (mpeg_sync_pol == TSIF_NORMAL)
+ mode &= ~V6_INVERTED_MPEG_SYNC;
+ else
+ mode |= V6_INVERTED_MPEG_SYNC;
+
+ /* MPEG Valid polarity */
+ if (mpeg_valid_pol == 0)
+ mode &= ~V6_INVERTED_MPEG_VALID;
+ else
+ mode |= V6_INVERTED_MPEG_VALID;
+
+ ret = mxl111sf_write_reg(state, V6_MPEG_IN_CTRL_REG, mode);
+ mxl_fail(ret);
+
+ return ret;
+}
+
+int mxl111sf_init_i2s_port(struct mxl111sf_state *state, u8 sample_size)
+{
+ static struct mxl111sf_reg_ctrl_info init_i2s[] = {
+ {0x1b, 0xff, 0x1e}, /* pin mux mode, Choose 656/I2S input */
+ {0x15, 0x60, 0x60}, /* Enable I2S */
+ {0x17, 0xe0, 0x20}, /* Input, MPEG MODE USB,
+ Inverted 656 Clock, I2S_SOFT_RESET,
+ 0 : Normal operation, 1 : Reset State */
+#if 0
+ {0x12, 0x01, 0x00}, /* AUDIO_IRQ_CLR (Overflow Indicator) */
+#endif
+ {0x00, 0xff, 0x02}, /* Change to Control Page */
+ {0x26, 0x0d, 0x0d}, /* I2S_MODE & BT656_SRC_SEL for FPGA only */
+ {0x00, 0xff, 0x00},
+ {0, 0, 0}
+ };
+ int ret;
+
+ mxl_debug("(0x%02x)", sample_size);
+
+ ret = mxl111sf_ctrl_program_regs(state, init_i2s);
+ if (mxl_fail(ret))
+ goto fail;
+
+ ret = mxl111sf_write_reg(state, V6_I2S_NUM_SAMPLES_REG, sample_size);
+ mxl_fail(ret);
+fail:
+ return ret;
+}
+
+int mxl111sf_disable_i2s_port(struct mxl111sf_state *state)
+{
+ static struct mxl111sf_reg_ctrl_info disable_i2s[] = {
+ {0x15, 0x40, 0x00},
+ {0, 0, 0}
+ };
+
+ mxl_debug("()");
+
+ return mxl111sf_ctrl_program_regs(state, disable_i2s);
+}
+
+int mxl111sf_config_i2s(struct mxl111sf_state *state,
+ u8 msb_start_pos, u8 data_width)
+{
+ int ret;
+ u8 tmp;
+
+ mxl_debug("(0x%02x, 0x%02x)", msb_start_pos, data_width);
+
+ ret = mxl111sf_read_reg(state, V6_I2S_STREAM_START_BIT_REG, &tmp);
+ if (mxl_fail(ret))
+ goto fail;
+
+ tmp &= 0xe0;
+ tmp |= msb_start_pos;
+ ret = mxl111sf_write_reg(state, V6_I2S_STREAM_START_BIT_REG, tmp);
+ if (mxl_fail(ret))
+ goto fail;
+
+ ret = mxl111sf_read_reg(state, V6_I2S_STREAM_END_BIT_REG, &tmp);
+ if (mxl_fail(ret))
+ goto fail;
+
+ tmp &= 0xe0;
+ tmp |= data_width;
+ ret = mxl111sf_write_reg(state, V6_I2S_STREAM_END_BIT_REG, tmp);
+ mxl_fail(ret);
+fail:
+ return ret;
+}
+
+int mxl111sf_config_spi(struct mxl111sf_state *state, int onoff)
+{
+ u8 val;
+ int ret;
+
+ mxl_debug("(%d)", onoff);
+
+ ret = mxl111sf_write_reg(state, 0x00, 0x02);
+ if (mxl_fail(ret))
+ goto fail;
+
+ ret = mxl111sf_read_reg(state, V8_SPI_MODE_REG, &val);
+ if (mxl_fail(ret))
+ goto fail;
+
+ if (onoff)
+ val |= 0x04;
+ else
+ val &= ~0x04;
+
+ ret = mxl111sf_write_reg(state, V8_SPI_MODE_REG, val);
+ if (mxl_fail(ret))
+ goto fail;
+
+ ret = mxl111sf_write_reg(state, 0x00, 0x00);
+ mxl_fail(ret);
+fail:
+ return ret;
+}
+
+int mxl111sf_idac_config(struct mxl111sf_state *state,
+ u8 control_mode, u8 current_setting,
+ u8 current_value, u8 hysteresis_value)
+{
+ int ret;
+ u8 val;
+ /* current value will be set for both automatic & manual IDAC control */
+ val = current_value;
+
+ if (control_mode == IDAC_MANUAL_CONTROL) {
+ /* enable manual control of IDAC */
+ val |= IDAC_MANUAL_CONTROL_BIT_MASK;
+
+ if (current_setting == IDAC_CURRENT_SINKING_ENABLE)
+ /* enable current sinking in manual mode */
+ val |= IDAC_CURRENT_SINKING_BIT_MASK;
+ else
+ /* disable current sinking in manual mode */
+ val &= ~IDAC_CURRENT_SINKING_BIT_MASK;
+ } else {
+ /* disable manual control of IDAC */
+ val &= ~IDAC_MANUAL_CONTROL_BIT_MASK;
+
+ /* set hysteresis value reg: 0x0B<5:0> */
+ ret = mxl111sf_write_reg(state, V6_IDAC_HYSTERESIS_REG,
+ (hysteresis_value & 0x3F));
+ mxl_fail(ret);
+ }
+
+ ret = mxl111sf_write_reg(state, V6_IDAC_SETTINGS_REG, val);
+ mxl_fail(ret);
+
+ return ret;
+}
diff --git a/kernel/drivers/media/usb/dvb-usb-v2/mxl111sf-phy.h b/kernel/drivers/media/usb/dvb-usb-v2/mxl111sf-phy.h
new file mode 100644
index 000000000..25aa4a1ea
--- /dev/null
+++ b/kernel/drivers/media/usb/dvb-usb-v2/mxl111sf-phy.h
@@ -0,0 +1,47 @@
+/*
+ * mxl111sf-phy.h - driver for the MaxLinear MXL111SF
+ *
+ * Copyright (C) 2010-2014 Michael Krufky <mkrufky@linuxtv.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef _DVB_USB_MXL111SF_PHY_H_
+#define _DVB_USB_MXL111SF_PHY_H_
+
+#include "mxl111sf.h"
+
+int mxl1x1sf_soft_reset(struct mxl111sf_state *state);
+int mxl1x1sf_set_device_mode(struct mxl111sf_state *state, int mode);
+int mxl1x1sf_top_master_ctrl(struct mxl111sf_state *state, int onoff);
+int mxl111sf_disable_656_port(struct mxl111sf_state *state);
+int mxl111sf_init_tuner_demod(struct mxl111sf_state *state);
+int mxl111sf_enable_usb_output(struct mxl111sf_state *state);
+int mxl111sf_config_mpeg_in(struct mxl111sf_state *state,
+ unsigned int parallel_serial,
+ unsigned int msb_lsb_1st,
+ unsigned int clock_phase,
+ unsigned int mpeg_valid_pol,
+ unsigned int mpeg_sync_pol);
+int mxl111sf_config_i2s(struct mxl111sf_state *state,
+ u8 msb_start_pos, u8 data_width);
+int mxl111sf_init_i2s_port(struct mxl111sf_state *state, u8 sample_size);
+int mxl111sf_disable_i2s_port(struct mxl111sf_state *state);
+int mxl111sf_config_spi(struct mxl111sf_state *state, int onoff);
+int mxl111sf_idac_config(struct mxl111sf_state *state,
+ u8 control_mode, u8 current_setting,
+ u8 current_value, u8 hysteresis_value);
+
+#endif /* _DVB_USB_MXL111SF_PHY_H_ */
diff --git a/kernel/drivers/media/usb/dvb-usb-v2/mxl111sf-reg.h b/kernel/drivers/media/usb/dvb-usb-v2/mxl111sf-reg.h
new file mode 100644
index 000000000..1f4bfbcdb
--- /dev/null
+++ b/kernel/drivers/media/usb/dvb-usb-v2/mxl111sf-reg.h
@@ -0,0 +1,173 @@
+/*
+ * mxl111sf-reg.h - driver for the MaxLinear MXL111SF
+ *
+ * Copyright (C) 2010-2014 Michael Krufky <mkrufky@linuxtv.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef _DVB_USB_MXL111SF_REG_H_
+#define _DVB_USB_MXL111SF_REG_H_
+
+#define CHIP_ID_REG 0xFC
+#define TOP_CHIP_REV_ID_REG 0xFA
+
+#define V6_SNR_RB_LSB_REG 0x27
+#define V6_SNR_RB_MSB_REG 0x28
+
+#define V6_N_ACCUMULATE_REG 0x11
+#define V6_RS_AVG_ERRORS_LSB_REG 0x2C
+#define V6_RS_AVG_ERRORS_MSB_REG 0x2D
+
+#define V6_IRQ_STATUS_REG 0x24
+#define IRQ_MASK_FEC_LOCK 0x10
+
+#define V6_SYNC_LOCK_REG 0x28
+#define SYNC_LOCK_MASK 0x10
+
+#define V6_RS_LOCK_DET_REG 0x28
+#define RS_LOCK_DET_MASK 0x08
+
+#define V6_INITACQ_NODETECT_REG 0x20
+#define V6_FORCE_NFFT_CPSIZE_REG 0x20
+
+#define V6_CODE_RATE_TPS_REG 0x29
+#define V6_CODE_RATE_TPS_MASK 0x07
+
+
+#define V6_CP_LOCK_DET_REG 0x28
+#define V6_CP_LOCK_DET_MASK 0x04
+
+#define V6_TPS_HIERACHY_REG 0x29
+#define V6_TPS_HIERARCHY_INFO_MASK 0x40
+
+#define V6_MODORDER_TPS_REG 0x2A
+#define V6_PARAM_CONSTELLATION_MASK 0x30
+
+#define V6_MODE_TPS_REG 0x2A
+#define V6_PARAM_FFT_MODE_MASK 0x0C
+
+
+#define V6_CP_TPS_REG 0x29
+#define V6_PARAM_GI_MASK 0x30
+
+#define V6_TPS_LOCK_REG 0x2A
+#define V6_PARAM_TPS_LOCK_MASK 0x40
+
+#define V6_FEC_PER_COUNT_REG 0x2E
+#define V6_FEC_PER_SCALE_REG 0x2B
+#define V6_FEC_PER_SCALE_MASK 0x03
+#define V6_FEC_PER_CLR_REG 0x20
+#define V6_FEC_PER_CLR_MASK 0x01
+
+#define V6_PIN_MUX_MODE_REG 0x1B
+#define V6_ENABLE_PIN_MUX 0x1E
+
+#define V6_I2S_NUM_SAMPLES_REG 0x16
+
+#define V6_MPEG_IN_CLK_INV_REG 0x17
+#define V6_MPEG_IN_CTRL_REG 0x18
+
+#define V6_INVERTED_CLK_PHASE 0x20
+#define V6_MPEG_IN_DATA_PARALLEL 0x01
+#define V6_MPEG_IN_DATA_SERIAL 0x02
+
+#define V6_INVERTED_MPEG_SYNC 0x04
+#define V6_INVERTED_MPEG_VALID 0x08
+
+#define TSIF_INPUT_PARALLEL 0
+#define TSIF_INPUT_SERIAL 1
+#define TSIF_NORMAL 0
+
+#define V6_MPEG_INOUT_BIT_ORDER_CTRL_REG 0x19
+#define V6_MPEG_SER_MSB_FIRST 0x80
+#define MPEG_SER_MSB_FIRST_ENABLED 0x01
+
+#define V6_656_I2S_BUFF_STATUS_REG 0x2F
+#define V6_656_OVERFLOW_MASK_BIT 0x08
+#define V6_I2S_OVERFLOW_MASK_BIT 0x01
+
+#define V6_I2S_STREAM_START_BIT_REG 0x14
+#define V6_I2S_STREAM_END_BIT_REG 0x15
+#define I2S_RIGHT_JUSTIFIED 0
+#define I2S_LEFT_JUSTIFIED 1
+#define I2S_DATA_FORMAT 2
+
+#define V6_TUNER_LOOP_THRU_CONTROL_REG 0x09
+#define V6_ENABLE_LOOP_THRU 0x01
+
+#define TOTAL_NUM_IF_OUTPUT_FREQ 16
+
+#define TUNER_NORMAL_IF_SPECTRUM 0x0
+#define TUNER_INVERT_IF_SPECTRUM 0x10
+
+#define V6_TUNER_IF_SEL_REG 0x06
+#define V6_TUNER_IF_FCW_REG 0x3C
+#define V6_TUNER_IF_FCW_BYP_REG 0x3D
+#define V6_RF_LOCK_STATUS_REG 0x23
+
+#define NUM_DIG_TV_CHANNEL 1000
+
+#define V6_DIG_CLK_FREQ_SEL_REG 0x07
+#define V6_REF_SYNTH_INT_REG 0x5C
+#define V6_REF_SYNTH_REMAIN_REG 0x58
+#define V6_DIG_RFREFSELECT_REG 0x32
+#define V6_XTAL_CLK_OUT_GAIN_REG 0x31
+#define V6_TUNER_LOOP_THRU_CTRL_REG 0x09
+#define V6_DIG_XTAL_ENABLE_REG 0x06
+#define V6_DIG_XTAL_BIAS_REG 0x66
+#define V6_XTAL_CAP_REG 0x08
+
+#define V6_GPO_CTRL_REG 0x18
+#define MXL_GPO_0 0x00
+#define MXL_GPO_1 0x01
+#define V6_GPO_0_MASK 0x10
+#define V6_GPO_1_MASK 0x20
+
+#define V6_111SF_GPO_CTRL_REG 0x19
+#define MXL_111SF_GPO_1 0x00
+#define MXL_111SF_GPO_2 0x01
+#define MXL_111SF_GPO_3 0x02
+#define MXL_111SF_GPO_4 0x03
+#define MXL_111SF_GPO_5 0x04
+#define MXL_111SF_GPO_6 0x05
+#define MXL_111SF_GPO_7 0x06
+
+#define MXL_111SF_GPO_0_MASK 0x01
+#define MXL_111SF_GPO_1_MASK 0x02
+#define MXL_111SF_GPO_2_MASK 0x04
+#define MXL_111SF_GPO_3_MASK 0x08
+#define MXL_111SF_GPO_4_MASK 0x10
+#define MXL_111SF_GPO_5_MASK 0x20
+#define MXL_111SF_GPO_6_MASK 0x40
+
+#define V6_ATSC_CONFIG_REG 0x0A
+
+#define MXL_MODE_REG 0x03
+#define START_TUNE_REG 0x1C
+
+#define V6_IDAC_HYSTERESIS_REG 0x0B
+#define V6_IDAC_SETTINGS_REG 0x0C
+#define IDAC_MANUAL_CONTROL 1
+#define IDAC_CURRENT_SINKING_ENABLE 1
+#define IDAC_MANUAL_CONTROL_BIT_MASK 0x80
+#define IDAC_CURRENT_SINKING_BIT_MASK 0x40
+
+#define V8_SPI_MODE_REG 0xE9
+
+#define V6_DIG_RF_PWR_LSB_REG 0x46
+#define V6_DIG_RF_PWR_MSB_REG 0x47
+
+#endif /* _DVB_USB_MXL111SF_REG_H_ */
diff --git a/kernel/drivers/media/usb/dvb-usb-v2/mxl111sf-tuner.c b/kernel/drivers/media/usb/dvb-usb-v2/mxl111sf-tuner.c
new file mode 100644
index 000000000..444579be0
--- /dev/null
+++ b/kernel/drivers/media/usb/dvb-usb-v2/mxl111sf-tuner.c
@@ -0,0 +1,517 @@
+/*
+ * mxl111sf-tuner.c - driver for the MaxLinear MXL111SF CMOS tuner
+ *
+ * Copyright (C) 2010-2014 Michael Krufky <mkrufky@linuxtv.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include "mxl111sf-tuner.h"
+#include "mxl111sf-phy.h"
+#include "mxl111sf-reg.h"
+
+/* debug */
+static int mxl111sf_tuner_debug;
+module_param_named(debug, mxl111sf_tuner_debug, int, 0644);
+MODULE_PARM_DESC(debug, "set debugging level (1=info (or-able)).");
+
+#define mxl_dbg(fmt, arg...) \
+ if (mxl111sf_tuner_debug) \
+ mxl_printk(KERN_DEBUG, fmt, ##arg)
+
+/* ------------------------------------------------------------------------ */
+
+struct mxl111sf_tuner_state {
+ struct mxl111sf_state *mxl_state;
+
+ struct mxl111sf_tuner_config *cfg;
+
+ enum mxl_if_freq if_freq;
+
+ u32 frequency;
+ u32 bandwidth;
+};
+
+static int mxl111sf_tuner_read_reg(struct mxl111sf_tuner_state *state,
+ u8 addr, u8 *data)
+{
+ return (state->cfg->read_reg) ?
+ state->cfg->read_reg(state->mxl_state, addr, data) :
+ -EINVAL;
+}
+
+static int mxl111sf_tuner_write_reg(struct mxl111sf_tuner_state *state,
+ u8 addr, u8 data)
+{
+ return (state->cfg->write_reg) ?
+ state->cfg->write_reg(state->mxl_state, addr, data) :
+ -EINVAL;
+}
+
+static int mxl111sf_tuner_program_regs(struct mxl111sf_tuner_state *state,
+ struct mxl111sf_reg_ctrl_info *ctrl_reg_info)
+{
+ return (state->cfg->program_regs) ?
+ state->cfg->program_regs(state->mxl_state, ctrl_reg_info) :
+ -EINVAL;
+}
+
+static int mxl1x1sf_tuner_top_master_ctrl(struct mxl111sf_tuner_state *state,
+ int onoff)
+{
+ return (state->cfg->top_master_ctrl) ?
+ state->cfg->top_master_ctrl(state->mxl_state, onoff) :
+ -EINVAL;
+}
+
+/* ------------------------------------------------------------------------ */
+
+static struct mxl111sf_reg_ctrl_info mxl_phy_tune_rf[] = {
+ {0x1d, 0x7f, 0x00}, /* channel bandwidth section 1/2/3,
+ DIG_MODEINDEX, _A, _CSF, */
+ {0x1e, 0xff, 0x00}, /* channel frequency (lo and fractional) */
+ {0x1f, 0xff, 0x00}, /* channel frequency (hi for integer portion) */
+ {0, 0, 0}
+};
+
+/* ------------------------------------------------------------------------ */
+
+static struct mxl111sf_reg_ctrl_info *mxl111sf_calc_phy_tune_regs(u32 freq,
+ u8 bw)
+{
+ u8 filt_bw;
+
+ /* set channel bandwidth */
+ switch (bw) {
+ case 0: /* ATSC */
+ filt_bw = 25;
+ break;
+ case 1: /* QAM */
+ filt_bw = 69;
+ break;
+ case 6:
+ filt_bw = 21;
+ break;
+ case 7:
+ filt_bw = 42;
+ break;
+ case 8:
+ filt_bw = 63;
+ break;
+ default:
+ pr_err("%s: invalid bandwidth setting!", __func__);
+ return NULL;
+ }
+
+ /* calculate RF channel */
+ freq /= 1000000;
+
+ freq *= 64;
+#if 0
+ /* do round */
+ freq += 0.5;
+#endif
+ /* set bandwidth */
+ mxl_phy_tune_rf[0].data = filt_bw;
+
+ /* set RF */
+ mxl_phy_tune_rf[1].data = (freq & 0xff);
+ mxl_phy_tune_rf[2].data = (freq >> 8) & 0xff;
+
+ /* start tune */
+ return mxl_phy_tune_rf;
+}
+
+static int mxl1x1sf_tuner_set_if_output_freq(struct mxl111sf_tuner_state *state)
+{
+ int ret;
+ u8 ctrl;
+#if 0
+ u16 iffcw;
+ u32 if_freq;
+#endif
+ mxl_dbg("(IF polarity = %d, IF freq = 0x%02x)",
+ state->cfg->invert_spectrum, state->cfg->if_freq);
+
+ /* set IF polarity */
+ ctrl = state->cfg->invert_spectrum;
+
+ ctrl |= state->cfg->if_freq;
+
+ ret = mxl111sf_tuner_write_reg(state, V6_TUNER_IF_SEL_REG, ctrl);
+ if (mxl_fail(ret))
+ goto fail;
+
+#if 0
+ if_freq /= 1000000;
+
+ /* do round */
+ if_freq += 0.5;
+
+ if (MXL_IF_LO == state->cfg->if_freq) {
+ ctrl = 0x08;
+ iffcw = (u16)(if_freq / (108 * 4096));
+ } else if (MXL_IF_HI == state->cfg->if_freq) {
+ ctrl = 0x08;
+ iffcw = (u16)(if_freq / (216 * 4096));
+ } else {
+ ctrl = 0;
+ iffcw = 0;
+ }
+
+ ctrl |= (iffcw >> 8);
+#endif
+ ret = mxl111sf_tuner_read_reg(state, V6_TUNER_IF_FCW_BYP_REG, &ctrl);
+ if (mxl_fail(ret))
+ goto fail;
+
+ ctrl &= 0xf0;
+ ctrl |= 0x90;
+
+ ret = mxl111sf_tuner_write_reg(state, V6_TUNER_IF_FCW_BYP_REG, ctrl);
+ if (mxl_fail(ret))
+ goto fail;
+
+#if 0
+ ctrl = iffcw & 0x00ff;
+#endif
+ ret = mxl111sf_tuner_write_reg(state, V6_TUNER_IF_FCW_REG, ctrl);
+ if (mxl_fail(ret))
+ goto fail;
+
+ state->if_freq = state->cfg->if_freq;
+fail:
+ return ret;
+}
+
+static int mxl1x1sf_tune_rf(struct dvb_frontend *fe, u32 freq, u8 bw)
+{
+ struct mxl111sf_tuner_state *state = fe->tuner_priv;
+ static struct mxl111sf_reg_ctrl_info *reg_ctrl_array;
+ int ret;
+ u8 mxl_mode;
+
+ mxl_dbg("(freq = %d, bw = 0x%x)", freq, bw);
+
+ /* stop tune */
+ ret = mxl111sf_tuner_write_reg(state, START_TUNE_REG, 0);
+ if (mxl_fail(ret))
+ goto fail;
+
+ /* check device mode */
+ ret = mxl111sf_tuner_read_reg(state, MXL_MODE_REG, &mxl_mode);
+ if (mxl_fail(ret))
+ goto fail;
+
+ /* Fill out registers for channel tune */
+ reg_ctrl_array = mxl111sf_calc_phy_tune_regs(freq, bw);
+ if (!reg_ctrl_array)
+ return -EINVAL;
+
+ ret = mxl111sf_tuner_program_regs(state, reg_ctrl_array);
+ if (mxl_fail(ret))
+ goto fail;
+
+ if ((mxl_mode & MXL_DEV_MODE_MASK) == MXL_TUNER_MODE) {
+ /* IF tuner mode only */
+ mxl1x1sf_tuner_top_master_ctrl(state, 0);
+ mxl1x1sf_tuner_top_master_ctrl(state, 1);
+ mxl1x1sf_tuner_set_if_output_freq(state);
+ }
+
+ ret = mxl111sf_tuner_write_reg(state, START_TUNE_REG, 1);
+ if (mxl_fail(ret))
+ goto fail;
+
+ if (state->cfg->ant_hunt)
+ state->cfg->ant_hunt(fe);
+fail:
+ return ret;
+}
+
+static int mxl1x1sf_tuner_get_lock_status(struct mxl111sf_tuner_state *state,
+ int *rf_synth_lock,
+ int *ref_synth_lock)
+{
+ int ret;
+ u8 data;
+
+ *rf_synth_lock = 0;
+ *ref_synth_lock = 0;
+
+ ret = mxl111sf_tuner_read_reg(state, V6_RF_LOCK_STATUS_REG, &data);
+ if (mxl_fail(ret))
+ goto fail;
+
+ *ref_synth_lock = ((data & 0x03) == 0x03) ? 1 : 0;
+ *rf_synth_lock = ((data & 0x0c) == 0x0c) ? 1 : 0;
+fail:
+ return ret;
+}
+
+#if 0
+static int mxl1x1sf_tuner_loop_thru_ctrl(struct mxl111sf_tuner_state *state,
+ int onoff)
+{
+ return mxl111sf_tuner_write_reg(state, V6_TUNER_LOOP_THRU_CTRL_REG,
+ onoff ? 1 : 0);
+}
+#endif
+
+/* ------------------------------------------------------------------------ */
+
+static int mxl111sf_tuner_set_params(struct dvb_frontend *fe)
+{
+ struct dtv_frontend_properties *c = &fe->dtv_property_cache;
+ u32 delsys = c->delivery_system;
+ struct mxl111sf_tuner_state *state = fe->tuner_priv;
+ int ret;
+ u8 bw;
+
+ mxl_dbg("()");
+
+ switch (delsys) {
+ case SYS_ATSC:
+ case SYS_ATSCMH:
+ bw = 0; /* ATSC */
+ break;
+ case SYS_DVBC_ANNEX_B:
+ bw = 1; /* US CABLE */
+ break;
+ case SYS_DVBT:
+ switch (c->bandwidth_hz) {
+ case 6000000:
+ bw = 6;
+ break;
+ case 7000000:
+ bw = 7;
+ break;
+ case 8000000:
+ bw = 8;
+ break;
+ default:
+ pr_err("%s: bandwidth not set!", __func__);
+ return -EINVAL;
+ }
+ break;
+ default:
+ pr_err("%s: modulation type not supported!", __func__);
+ return -EINVAL;
+ }
+ ret = mxl1x1sf_tune_rf(fe, c->frequency, bw);
+ if (mxl_fail(ret))
+ goto fail;
+
+ state->frequency = c->frequency;
+ state->bandwidth = c->bandwidth_hz;
+fail:
+ return ret;
+}
+
+/* ------------------------------------------------------------------------ */
+
+#if 0
+static int mxl111sf_tuner_init(struct dvb_frontend *fe)
+{
+ struct mxl111sf_tuner_state *state = fe->tuner_priv;
+ int ret;
+
+ /* wake from standby handled by usb driver */
+
+ return ret;
+}
+
+static int mxl111sf_tuner_sleep(struct dvb_frontend *fe)
+{
+ struct mxl111sf_tuner_state *state = fe->tuner_priv;
+ int ret;
+
+ /* enter standby mode handled by usb driver */
+
+ return ret;
+}
+#endif
+
+/* ------------------------------------------------------------------------ */
+
+static int mxl111sf_tuner_get_status(struct dvb_frontend *fe, u32 *status)
+{
+ struct mxl111sf_tuner_state *state = fe->tuner_priv;
+ int rf_locked, ref_locked, ret;
+
+ *status = 0;
+
+ ret = mxl1x1sf_tuner_get_lock_status(state, &rf_locked, &ref_locked);
+ if (mxl_fail(ret))
+ goto fail;
+ mxl_info("%s%s", rf_locked ? "rf locked " : "",
+ ref_locked ? "ref locked" : "");
+
+ if ((rf_locked) || (ref_locked))
+ *status |= TUNER_STATUS_LOCKED;
+fail:
+ return ret;
+}
+
+static int mxl111sf_get_rf_strength(struct dvb_frontend *fe, u16 *strength)
+{
+ struct mxl111sf_tuner_state *state = fe->tuner_priv;
+ u8 val1, val2;
+ int ret;
+
+ *strength = 0;
+
+ ret = mxl111sf_tuner_write_reg(state, 0x00, 0x02);
+ if (mxl_fail(ret))
+ goto fail;
+ ret = mxl111sf_tuner_read_reg(state, V6_DIG_RF_PWR_LSB_REG, &val1);
+ if (mxl_fail(ret))
+ goto fail;
+ ret = mxl111sf_tuner_read_reg(state, V6_DIG_RF_PWR_MSB_REG, &val2);
+ if (mxl_fail(ret))
+ goto fail;
+
+ *strength = val1 | ((val2 & 0x07) << 8);
+fail:
+ ret = mxl111sf_tuner_write_reg(state, 0x00, 0x00);
+ mxl_fail(ret);
+
+ return ret;
+}
+
+/* ------------------------------------------------------------------------ */
+
+static int mxl111sf_tuner_get_frequency(struct dvb_frontend *fe, u32 *frequency)
+{
+ struct mxl111sf_tuner_state *state = fe->tuner_priv;
+ *frequency = state->frequency;
+ return 0;
+}
+
+static int mxl111sf_tuner_get_bandwidth(struct dvb_frontend *fe, u32 *bandwidth)
+{
+ struct mxl111sf_tuner_state *state = fe->tuner_priv;
+ *bandwidth = state->bandwidth;
+ return 0;
+}
+
+static int mxl111sf_tuner_get_if_frequency(struct dvb_frontend *fe,
+ u32 *frequency)
+{
+ struct mxl111sf_tuner_state *state = fe->tuner_priv;
+
+ *frequency = 0;
+
+ switch (state->if_freq) {
+ case MXL_IF_4_0: /* 4.0 MHz */
+ *frequency = 4000000;
+ break;
+ case MXL_IF_4_5: /* 4.5 MHz */
+ *frequency = 4500000;
+ break;
+ case MXL_IF_4_57: /* 4.57 MHz */
+ *frequency = 4570000;
+ break;
+ case MXL_IF_5_0: /* 5.0 MHz */
+ *frequency = 5000000;
+ break;
+ case MXL_IF_5_38: /* 5.38 MHz */
+ *frequency = 5380000;
+ break;
+ case MXL_IF_6_0: /* 6.0 MHz */
+ *frequency = 6000000;
+ break;
+ case MXL_IF_6_28: /* 6.28 MHz */
+ *frequency = 6280000;
+ break;
+ case MXL_IF_7_2: /* 7.2 MHz */
+ *frequency = 7200000;
+ break;
+ case MXL_IF_35_25: /* 35.25 MHz */
+ *frequency = 35250000;
+ break;
+ case MXL_IF_36: /* 36 MHz */
+ *frequency = 36000000;
+ break;
+ case MXL_IF_36_15: /* 36.15 MHz */
+ *frequency = 36150000;
+ break;
+ case MXL_IF_44: /* 44 MHz */
+ *frequency = 44000000;
+ break;
+ }
+ return 0;
+}
+
+static int mxl111sf_tuner_release(struct dvb_frontend *fe)
+{
+ struct mxl111sf_tuner_state *state = fe->tuner_priv;
+ mxl_dbg("()");
+ kfree(state);
+ fe->tuner_priv = NULL;
+ return 0;
+}
+
+/* ------------------------------------------------------------------------- */
+
+static struct dvb_tuner_ops mxl111sf_tuner_tuner_ops = {
+ .info = {
+ .name = "MaxLinear MxL111SF",
+#if 0
+ .frequency_min = ,
+ .frequency_max = ,
+ .frequency_step = ,
+#endif
+ },
+#if 0
+ .init = mxl111sf_tuner_init,
+ .sleep = mxl111sf_tuner_sleep,
+#endif
+ .set_params = mxl111sf_tuner_set_params,
+ .get_status = mxl111sf_tuner_get_status,
+ .get_rf_strength = mxl111sf_get_rf_strength,
+ .get_frequency = mxl111sf_tuner_get_frequency,
+ .get_bandwidth = mxl111sf_tuner_get_bandwidth,
+ .get_if_frequency = mxl111sf_tuner_get_if_frequency,
+ .release = mxl111sf_tuner_release,
+};
+
+struct dvb_frontend *mxl111sf_tuner_attach(struct dvb_frontend *fe,
+ struct mxl111sf_state *mxl_state,
+ struct mxl111sf_tuner_config *cfg)
+{
+ struct mxl111sf_tuner_state *state = NULL;
+
+ mxl_dbg("()");
+
+ state = kzalloc(sizeof(struct mxl111sf_tuner_state), GFP_KERNEL);
+ if (state == NULL)
+ return NULL;
+
+ state->mxl_state = mxl_state;
+ state->cfg = cfg;
+
+ memcpy(&fe->ops.tuner_ops, &mxl111sf_tuner_tuner_ops,
+ sizeof(struct dvb_tuner_ops));
+
+ fe->tuner_priv = state;
+ return fe;
+}
+EXPORT_SYMBOL_GPL(mxl111sf_tuner_attach);
+
+MODULE_DESCRIPTION("MaxLinear MxL111SF CMOS tuner driver");
+MODULE_AUTHOR("Michael Krufky <mkrufky@linuxtv.org>");
+MODULE_LICENSE("GPL");
+MODULE_VERSION("0.1");
diff --git a/kernel/drivers/media/usb/dvb-usb-v2/mxl111sf-tuner.h b/kernel/drivers/media/usb/dvb-usb-v2/mxl111sf-tuner.h
new file mode 100644
index 000000000..e6caab21a
--- /dev/null
+++ b/kernel/drivers/media/usb/dvb-usb-v2/mxl111sf-tuner.h
@@ -0,0 +1,79 @@
+/*
+ * mxl111sf-tuner.h - driver for the MaxLinear MXL111SF CMOS tuner
+ *
+ * Copyright (C) 2010-2014 Michael Krufky <mkrufky@linuxtv.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __MXL111SF_TUNER_H__
+#define __MXL111SF_TUNER_H__
+
+#include <linux/kconfig.h>
+#include "dvb_frontend.h"
+#include "mxl111sf.h"
+
+enum mxl_if_freq {
+#if 0
+ MXL_IF_LO = 0x00, /* other IF < 9MHz */
+#endif
+ MXL_IF_4_0 = 0x01, /* 4.0 MHz */
+ MXL_IF_4_5 = 0x02, /* 4.5 MHz */
+ MXL_IF_4_57 = 0x03, /* 4.57 MHz */
+ MXL_IF_5_0 = 0x04, /* 5.0 MHz */
+ MXL_IF_5_38 = 0x05, /* 5.38 MHz */
+ MXL_IF_6_0 = 0x06, /* 6.0 MHz */
+ MXL_IF_6_28 = 0x07, /* 6.28 MHz */
+ MXL_IF_7_2 = 0x08, /* 7.2 MHz */
+ MXL_IF_35_25 = 0x09, /* 35.25 MHz */
+ MXL_IF_36 = 0x0a, /* 36 MHz */
+ MXL_IF_36_15 = 0x0b, /* 36.15 MHz */
+ MXL_IF_44 = 0x0c, /* 44 MHz */
+#if 0
+ MXL_IF_HI = 0x0f, /* other IF > 35 MHz and < 45 MHz */
+#endif
+};
+
+struct mxl111sf_tuner_config {
+ enum mxl_if_freq if_freq;
+ unsigned int invert_spectrum:1;
+
+ int (*read_reg)(struct mxl111sf_state *state, u8 addr, u8 *data);
+ int (*write_reg)(struct mxl111sf_state *state, u8 addr, u8 data);
+ int (*program_regs)(struct mxl111sf_state *state,
+ struct mxl111sf_reg_ctrl_info *ctrl_reg_info);
+ int (*top_master_ctrl)(struct mxl111sf_state *state, int onoff);
+ int (*ant_hunt)(struct dvb_frontend *fe);
+};
+
+/* ------------------------------------------------------------------------ */
+
+#if IS_ENABLED(CONFIG_DVB_USB_MXL111SF)
+extern
+struct dvb_frontend *mxl111sf_tuner_attach(struct dvb_frontend *fe,
+ struct mxl111sf_state *mxl_state,
+ struct mxl111sf_tuner_config *cfg);
+#else
+static inline
+struct dvb_frontend *mxl111sf_tuner_attach(struct dvb_frontend *fe,
+ struct mxl111sf_state *mxl_state,
+ struct mxl111sf_tuner_config *cfg)
+{
+ printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
+ return NULL;
+}
+#endif
+
+#endif /* __MXL111SF_TUNER_H__ */
diff --git a/kernel/drivers/media/usb/dvb-usb-v2/mxl111sf.c b/kernel/drivers/media/usb/dvb-usb-v2/mxl111sf.c
new file mode 100644
index 000000000..bec12b0e0
--- /dev/null
+++ b/kernel/drivers/media/usb/dvb-usb-v2/mxl111sf.c
@@ -0,0 +1,1427 @@
+/*
+ * Copyright (C) 2010-2014 Michael Krufky (mkrufky@linuxtv.org)
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation, version 2.
+ *
+ * see Documentation/dvb/README.dvb-usb for more information
+ */
+
+#include <linux/vmalloc.h>
+#include <linux/i2c.h>
+
+#include "mxl111sf.h"
+#include "mxl111sf-reg.h"
+#include "mxl111sf-phy.h"
+#include "mxl111sf-i2c.h"
+#include "mxl111sf-gpio.h"
+
+#include "mxl111sf-demod.h"
+#include "mxl111sf-tuner.h"
+
+#include "lgdt3305.h"
+#include "lg2160.h"
+
+/* Max transfer size done by I2C transfer functions */
+#define MAX_XFER_SIZE 64
+
+int dvb_usb_mxl111sf_debug;
+module_param_named(debug, dvb_usb_mxl111sf_debug, int, 0644);
+MODULE_PARM_DESC(debug, "set debugging level "
+ "(1=info, 2=xfer, 4=i2c, 8=reg, 16=adv (or-able)).");
+
+static int dvb_usb_mxl111sf_isoc;
+module_param_named(isoc, dvb_usb_mxl111sf_isoc, int, 0644);
+MODULE_PARM_DESC(isoc, "enable usb isoc xfer (0=bulk, 1=isoc).");
+
+static int dvb_usb_mxl111sf_spi;
+module_param_named(spi, dvb_usb_mxl111sf_spi, int, 0644);
+MODULE_PARM_DESC(spi, "use spi rather than tp for data xfer (0=tp, 1=spi).");
+
+#define ANT_PATH_AUTO 0
+#define ANT_PATH_EXTERNAL 1
+#define ANT_PATH_INTERNAL 2
+
+static int dvb_usb_mxl111sf_rfswitch =
+#if 0
+ ANT_PATH_AUTO;
+#else
+ ANT_PATH_EXTERNAL;
+#endif
+
+module_param_named(rfswitch, dvb_usb_mxl111sf_rfswitch, int, 0644);
+MODULE_PARM_DESC(rfswitch, "force rf switch position (0=auto, 1=ext, 2=int).");
+
+DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
+
+int mxl111sf_ctrl_msg(struct dvb_usb_device *d,
+ u8 cmd, u8 *wbuf, int wlen, u8 *rbuf, int rlen)
+{
+ int wo = (rbuf == NULL || rlen == 0); /* write-only */
+ int ret;
+ u8 sndbuf[MAX_XFER_SIZE];
+
+ if (1 + wlen > sizeof(sndbuf)) {
+ pr_warn("%s: len=%d is too big!\n", __func__, wlen);
+ return -EOPNOTSUPP;
+ }
+
+ pr_debug("%s(wlen = %d, rlen = %d)\n", __func__, wlen, rlen);
+
+ memset(sndbuf, 0, 1+wlen);
+
+ sndbuf[0] = cmd;
+ memcpy(&sndbuf[1], wbuf, wlen);
+
+ ret = (wo) ? dvb_usbv2_generic_write(d, sndbuf, 1+wlen) :
+ dvb_usbv2_generic_rw(d, sndbuf, 1+wlen, rbuf, rlen);
+ mxl_fail(ret);
+
+ return ret;
+}
+
+/* ------------------------------------------------------------------------ */
+
+#define MXL_CMD_REG_READ 0xaa
+#define MXL_CMD_REG_WRITE 0x55
+
+int mxl111sf_read_reg(struct mxl111sf_state *state, u8 addr, u8 *data)
+{
+ u8 buf[2];
+ int ret;
+
+ ret = mxl111sf_ctrl_msg(state->d, MXL_CMD_REG_READ, &addr, 1, buf, 2);
+ if (mxl_fail(ret)) {
+ mxl_debug("error reading reg: 0x%02x", addr);
+ goto fail;
+ }
+
+ if (buf[0] == addr)
+ *data = buf[1];
+ else {
+ pr_err("invalid response reading reg: 0x%02x != 0x%02x, 0x%02x",
+ addr, buf[0], buf[1]);
+ ret = -EINVAL;
+ }
+
+ pr_debug("R: (0x%02x, 0x%02x)\n", addr, buf[1]);
+fail:
+ return ret;
+}
+
+int mxl111sf_write_reg(struct mxl111sf_state *state, u8 addr, u8 data)
+{
+ u8 buf[] = { addr, data };
+ int ret;
+
+ pr_debug("W: (0x%02x, 0x%02x)\n", addr, data);
+
+ ret = mxl111sf_ctrl_msg(state->d, MXL_CMD_REG_WRITE, buf, 2, NULL, 0);
+ if (mxl_fail(ret))
+ pr_err("error writing reg: 0x%02x, val: 0x%02x", addr, data);
+ return ret;
+}
+
+/* ------------------------------------------------------------------------ */
+
+int mxl111sf_write_reg_mask(struct mxl111sf_state *state,
+ u8 addr, u8 mask, u8 data)
+{
+ int ret;
+ u8 val = 0;
+
+ if (mask != 0xff) {
+ ret = mxl111sf_read_reg(state, addr, &val);
+#if 1
+ /* dont know why this usually errors out on the first try */
+ if (mxl_fail(ret))
+ pr_err("error writing addr: 0x%02x, mask: 0x%02x, "
+ "data: 0x%02x, retrying...", addr, mask, data);
+
+ ret = mxl111sf_read_reg(state, addr, &val);
+#endif
+ if (mxl_fail(ret))
+ goto fail;
+ }
+ val &= ~mask;
+ val |= data;
+
+ ret = mxl111sf_write_reg(state, addr, val);
+ mxl_fail(ret);
+fail:
+ return ret;
+}
+
+/* ------------------------------------------------------------------------ */
+
+int mxl111sf_ctrl_program_regs(struct mxl111sf_state *state,
+ struct mxl111sf_reg_ctrl_info *ctrl_reg_info)
+{
+ int i, ret = 0;
+
+ for (i = 0; ctrl_reg_info[i].addr |
+ ctrl_reg_info[i].mask |
+ ctrl_reg_info[i].data; i++) {
+
+ ret = mxl111sf_write_reg_mask(state,
+ ctrl_reg_info[i].addr,
+ ctrl_reg_info[i].mask,
+ ctrl_reg_info[i].data);
+ if (mxl_fail(ret)) {
+ pr_err("failed on reg #%d (0x%02x)", i,
+ ctrl_reg_info[i].addr);
+ break;
+ }
+ }
+ return ret;
+}
+
+/* ------------------------------------------------------------------------ */
+
+static int mxl1x1sf_get_chip_info(struct mxl111sf_state *state)
+{
+ int ret;
+ u8 id, ver;
+ char *mxl_chip, *mxl_rev;
+
+ if ((state->chip_id) && (state->chip_ver))
+ return 0;
+
+ ret = mxl111sf_read_reg(state, CHIP_ID_REG, &id);
+ if (mxl_fail(ret))
+ goto fail;
+ state->chip_id = id;
+
+ ret = mxl111sf_read_reg(state, TOP_CHIP_REV_ID_REG, &ver);
+ if (mxl_fail(ret))
+ goto fail;
+ state->chip_ver = ver;
+
+ switch (id) {
+ case 0x61:
+ mxl_chip = "MxL101SF";
+ break;
+ case 0x63:
+ mxl_chip = "MxL111SF";
+ break;
+ default:
+ mxl_chip = "UNKNOWN MxL1X1";
+ break;
+ }
+ switch (ver) {
+ case 0x36:
+ state->chip_rev = MXL111SF_V6;
+ mxl_rev = "v6";
+ break;
+ case 0x08:
+ state->chip_rev = MXL111SF_V8_100;
+ mxl_rev = "v8_100";
+ break;
+ case 0x18:
+ state->chip_rev = MXL111SF_V8_200;
+ mxl_rev = "v8_200";
+ break;
+ default:
+ state->chip_rev = 0;
+ mxl_rev = "UNKNOWN REVISION";
+ break;
+ }
+ pr_info("%s detected, %s (0x%x)", mxl_chip, mxl_rev, ver);
+fail:
+ return ret;
+}
+
+#define get_chip_info(state) \
+({ \
+ int ___ret; \
+ ___ret = mxl1x1sf_get_chip_info(state); \
+ if (mxl_fail(___ret)) { \
+ mxl_debug("failed to get chip info" \
+ " on first probe attempt"); \
+ ___ret = mxl1x1sf_get_chip_info(state); \
+ if (mxl_fail(___ret)) \
+ pr_err("failed to get chip info during probe"); \
+ else \
+ mxl_debug("probe needed a retry " \
+ "in order to succeed."); \
+ } \
+ ___ret; \
+})
+
+/* ------------------------------------------------------------------------ */
+#if 0
+static int mxl111sf_power_ctrl(struct dvb_usb_device *d, int onoff)
+{
+ /* power control depends on which adapter is being woken:
+ * save this for init, instead, via mxl111sf_adap_fe_init */
+ return 0;
+}
+#endif
+
+static int mxl111sf_adap_fe_init(struct dvb_frontend *fe)
+{
+ struct dvb_usb_device *d = fe_to_d(fe);
+ struct mxl111sf_state *state = fe_to_priv(fe);
+ struct mxl111sf_adap_state *adap_state = &state->adap_state[fe->id];
+ int err;
+
+ /* exit if we didn't initialize the driver yet */
+ if (!state->chip_id) {
+ mxl_debug("driver not yet initialized, exit.");
+ goto fail;
+ }
+
+ pr_debug("%s()\n", __func__);
+
+ mutex_lock(&state->fe_lock);
+
+ state->alt_mode = adap_state->alt_mode;
+
+ if (usb_set_interface(d->udev, 0, state->alt_mode) < 0)
+ pr_err("set interface failed");
+
+ err = mxl1x1sf_soft_reset(state);
+ mxl_fail(err);
+ err = mxl111sf_init_tuner_demod(state);
+ mxl_fail(err);
+ err = mxl1x1sf_set_device_mode(state, adap_state->device_mode);
+
+ mxl_fail(err);
+ mxl111sf_enable_usb_output(state);
+ mxl_fail(err);
+ mxl1x1sf_top_master_ctrl(state, 1);
+ mxl_fail(err);
+
+ if ((MXL111SF_GPIO_MOD_DVBT != adap_state->gpio_mode) &&
+ (state->chip_rev > MXL111SF_V6)) {
+ mxl111sf_config_pin_mux_modes(state,
+ PIN_MUX_TS_SPI_IN_MODE_1);
+ mxl_fail(err);
+ }
+ err = mxl111sf_init_port_expander(state);
+ if (!mxl_fail(err)) {
+ state->gpio_mode = adap_state->gpio_mode;
+ err = mxl111sf_gpio_mode_switch(state, state->gpio_mode);
+ mxl_fail(err);
+#if 0
+ err = fe->ops.init(fe);
+#endif
+ msleep(100); /* add short delay after enabling
+ * the demod before touching it */
+ }
+
+ return (adap_state->fe_init) ? adap_state->fe_init(fe) : 0;
+fail:
+ return -ENODEV;
+}
+
+static int mxl111sf_adap_fe_sleep(struct dvb_frontend *fe)
+{
+ struct mxl111sf_state *state = fe_to_priv(fe);
+ struct mxl111sf_adap_state *adap_state = &state->adap_state[fe->id];
+ int err;
+
+ /* exit if we didn't initialize the driver yet */
+ if (!state->chip_id) {
+ mxl_debug("driver not yet initialized, exit.");
+ goto fail;
+ }
+
+ pr_debug("%s()\n", __func__);
+
+ err = (adap_state->fe_sleep) ? adap_state->fe_sleep(fe) : 0;
+
+ mutex_unlock(&state->fe_lock);
+
+ return err;
+fail:
+ return -ENODEV;
+}
+
+
+static int mxl111sf_ep6_streaming_ctrl(struct dvb_frontend *fe, int onoff)
+{
+ struct mxl111sf_state *state = fe_to_priv(fe);
+ struct mxl111sf_adap_state *adap_state = &state->adap_state[fe->id];
+ int ret = 0;
+
+ pr_debug("%s(%d)\n", __func__, onoff);
+
+ if (onoff) {
+ ret = mxl111sf_enable_usb_output(state);
+ mxl_fail(ret);
+ ret = mxl111sf_config_mpeg_in(state, 1, 1,
+ adap_state->ep6_clockphase,
+ 0, 0);
+ mxl_fail(ret);
+#if 0
+ } else {
+ ret = mxl111sf_disable_656_port(state);
+ mxl_fail(ret);
+#endif
+ }
+
+ return ret;
+}
+
+static int mxl111sf_ep5_streaming_ctrl(struct dvb_frontend *fe, int onoff)
+{
+ struct mxl111sf_state *state = fe_to_priv(fe);
+ int ret = 0;
+
+ pr_debug("%s(%d)\n", __func__, onoff);
+
+ if (onoff) {
+ ret = mxl111sf_enable_usb_output(state);
+ mxl_fail(ret);
+
+ ret = mxl111sf_init_i2s_port(state, 200);
+ mxl_fail(ret);
+ ret = mxl111sf_config_i2s(state, 0, 15);
+ mxl_fail(ret);
+ } else {
+ ret = mxl111sf_disable_i2s_port(state);
+ mxl_fail(ret);
+ }
+ if (state->chip_rev > MXL111SF_V6)
+ ret = mxl111sf_config_spi(state, onoff);
+ mxl_fail(ret);
+
+ return ret;
+}
+
+static int mxl111sf_ep4_streaming_ctrl(struct dvb_frontend *fe, int onoff)
+{
+ struct mxl111sf_state *state = fe_to_priv(fe);
+ int ret = 0;
+
+ pr_debug("%s(%d)\n", __func__, onoff);
+
+ if (onoff) {
+ ret = mxl111sf_enable_usb_output(state);
+ mxl_fail(ret);
+ }
+
+ return ret;
+}
+
+/* ------------------------------------------------------------------------ */
+
+static struct lgdt3305_config hauppauge_lgdt3305_config = {
+ .i2c_addr = 0xb2 >> 1,
+ .mpeg_mode = LGDT3305_MPEG_SERIAL,
+ .tpclk_edge = LGDT3305_TPCLK_RISING_EDGE,
+ .tpvalid_polarity = LGDT3305_TP_VALID_HIGH,
+ .deny_i2c_rptr = 1,
+ .spectral_inversion = 0,
+ .qam_if_khz = 6000,
+ .vsb_if_khz = 6000,
+};
+
+static int mxl111sf_lgdt3305_frontend_attach(struct dvb_usb_adapter *adap, u8 fe_id)
+{
+ struct dvb_usb_device *d = adap_to_d(adap);
+ struct mxl111sf_state *state = d_to_priv(d);
+ struct mxl111sf_adap_state *adap_state = &state->adap_state[fe_id];
+ int ret;
+
+ pr_debug("%s()\n", __func__);
+
+ /* save a pointer to the dvb_usb_device in device state */
+ state->d = d;
+ adap_state->alt_mode = (dvb_usb_mxl111sf_isoc) ? 2 : 1;
+ state->alt_mode = adap_state->alt_mode;
+
+ if (usb_set_interface(d->udev, 0, state->alt_mode) < 0)
+ pr_err("set interface failed");
+
+ state->gpio_mode = MXL111SF_GPIO_MOD_ATSC;
+ adap_state->gpio_mode = state->gpio_mode;
+ adap_state->device_mode = MXL_TUNER_MODE;
+ adap_state->ep6_clockphase = 1;
+
+ ret = mxl1x1sf_soft_reset(state);
+ if (mxl_fail(ret))
+ goto fail;
+ ret = mxl111sf_init_tuner_demod(state);
+ if (mxl_fail(ret))
+ goto fail;
+
+ ret = mxl1x1sf_set_device_mode(state, adap_state->device_mode);
+ if (mxl_fail(ret))
+ goto fail;
+
+ ret = mxl111sf_enable_usb_output(state);
+ if (mxl_fail(ret))
+ goto fail;
+ ret = mxl1x1sf_top_master_ctrl(state, 1);
+ if (mxl_fail(ret))
+ goto fail;
+
+ ret = mxl111sf_init_port_expander(state);
+ if (mxl_fail(ret))
+ goto fail;
+ ret = mxl111sf_gpio_mode_switch(state, state->gpio_mode);
+ if (mxl_fail(ret))
+ goto fail;
+
+ adap->fe[fe_id] = dvb_attach(lgdt3305_attach,
+ &hauppauge_lgdt3305_config,
+ &d->i2c_adap);
+ if (adap->fe[fe_id]) {
+ state->num_frontends++;
+ adap_state->fe_init = adap->fe[fe_id]->ops.init;
+ adap->fe[fe_id]->ops.init = mxl111sf_adap_fe_init;
+ adap_state->fe_sleep = adap->fe[fe_id]->ops.sleep;
+ adap->fe[fe_id]->ops.sleep = mxl111sf_adap_fe_sleep;
+ return 0;
+ }
+ ret = -EIO;
+fail:
+ return ret;
+}
+
+static struct lg2160_config hauppauge_lg2160_config = {
+ .lg_chip = LG2160,
+ .i2c_addr = 0x1c >> 1,
+ .deny_i2c_rptr = 1,
+ .spectral_inversion = 0,
+ .if_khz = 6000,
+};
+
+static int mxl111sf_lg2160_frontend_attach(struct dvb_usb_adapter *adap, u8 fe_id)
+{
+ struct dvb_usb_device *d = adap_to_d(adap);
+ struct mxl111sf_state *state = d_to_priv(d);
+ struct mxl111sf_adap_state *adap_state = &state->adap_state[fe_id];
+ int ret;
+
+ pr_debug("%s()\n", __func__);
+
+ /* save a pointer to the dvb_usb_device in device state */
+ state->d = d;
+ adap_state->alt_mode = (dvb_usb_mxl111sf_isoc) ? 2 : 1;
+ state->alt_mode = adap_state->alt_mode;
+
+ if (usb_set_interface(d->udev, 0, state->alt_mode) < 0)
+ pr_err("set interface failed");
+
+ state->gpio_mode = MXL111SF_GPIO_MOD_MH;
+ adap_state->gpio_mode = state->gpio_mode;
+ adap_state->device_mode = MXL_TUNER_MODE;
+ adap_state->ep6_clockphase = 1;
+
+ ret = mxl1x1sf_soft_reset(state);
+ if (mxl_fail(ret))
+ goto fail;
+ ret = mxl111sf_init_tuner_demod(state);
+ if (mxl_fail(ret))
+ goto fail;
+
+ ret = mxl1x1sf_set_device_mode(state, adap_state->device_mode);
+ if (mxl_fail(ret))
+ goto fail;
+
+ ret = mxl111sf_enable_usb_output(state);
+ if (mxl_fail(ret))
+ goto fail;
+ ret = mxl1x1sf_top_master_ctrl(state, 1);
+ if (mxl_fail(ret))
+ goto fail;
+
+ ret = mxl111sf_init_port_expander(state);
+ if (mxl_fail(ret))
+ goto fail;
+ ret = mxl111sf_gpio_mode_switch(state, state->gpio_mode);
+ if (mxl_fail(ret))
+ goto fail;
+
+ ret = get_chip_info(state);
+ if (mxl_fail(ret))
+ goto fail;
+
+ adap->fe[fe_id] = dvb_attach(lg2160_attach,
+ &hauppauge_lg2160_config,
+ &d->i2c_adap);
+ if (adap->fe[fe_id]) {
+ state->num_frontends++;
+ adap_state->fe_init = adap->fe[fe_id]->ops.init;
+ adap->fe[fe_id]->ops.init = mxl111sf_adap_fe_init;
+ adap_state->fe_sleep = adap->fe[fe_id]->ops.sleep;
+ adap->fe[fe_id]->ops.sleep = mxl111sf_adap_fe_sleep;
+ return 0;
+ }
+ ret = -EIO;
+fail:
+ return ret;
+}
+
+static struct lg2160_config hauppauge_lg2161_1019_config = {
+ .lg_chip = LG2161_1019,
+ .i2c_addr = 0x1c >> 1,
+ .deny_i2c_rptr = 1,
+ .spectral_inversion = 0,
+ .if_khz = 6000,
+ .output_if = 2, /* LG2161_OIF_SPI_MAS */
+};
+
+static struct lg2160_config hauppauge_lg2161_1040_config = {
+ .lg_chip = LG2161_1040,
+ .i2c_addr = 0x1c >> 1,
+ .deny_i2c_rptr = 1,
+ .spectral_inversion = 0,
+ .if_khz = 6000,
+ .output_if = 4, /* LG2161_OIF_SPI_MAS */
+};
+
+static int mxl111sf_lg2161_frontend_attach(struct dvb_usb_adapter *adap, u8 fe_id)
+{
+ struct dvb_usb_device *d = adap_to_d(adap);
+ struct mxl111sf_state *state = d_to_priv(d);
+ struct mxl111sf_adap_state *adap_state = &state->adap_state[fe_id];
+ int ret;
+
+ pr_debug("%s()\n", __func__);
+
+ /* save a pointer to the dvb_usb_device in device state */
+ state->d = d;
+ adap_state->alt_mode = (dvb_usb_mxl111sf_isoc) ? 2 : 1;
+ state->alt_mode = adap_state->alt_mode;
+
+ if (usb_set_interface(d->udev, 0, state->alt_mode) < 0)
+ pr_err("set interface failed");
+
+ state->gpio_mode = MXL111SF_GPIO_MOD_MH;
+ adap_state->gpio_mode = state->gpio_mode;
+ adap_state->device_mode = MXL_TUNER_MODE;
+ adap_state->ep6_clockphase = 1;
+
+ ret = mxl1x1sf_soft_reset(state);
+ if (mxl_fail(ret))
+ goto fail;
+ ret = mxl111sf_init_tuner_demod(state);
+ if (mxl_fail(ret))
+ goto fail;
+
+ ret = mxl1x1sf_set_device_mode(state, adap_state->device_mode);
+ if (mxl_fail(ret))
+ goto fail;
+
+ ret = mxl111sf_enable_usb_output(state);
+ if (mxl_fail(ret))
+ goto fail;
+ ret = mxl1x1sf_top_master_ctrl(state, 1);
+ if (mxl_fail(ret))
+ goto fail;
+
+ ret = mxl111sf_init_port_expander(state);
+ if (mxl_fail(ret))
+ goto fail;
+ ret = mxl111sf_gpio_mode_switch(state, state->gpio_mode);
+ if (mxl_fail(ret))
+ goto fail;
+
+ ret = get_chip_info(state);
+ if (mxl_fail(ret))
+ goto fail;
+
+ adap->fe[fe_id] = dvb_attach(lg2160_attach,
+ (MXL111SF_V8_200 == state->chip_rev) ?
+ &hauppauge_lg2161_1040_config :
+ &hauppauge_lg2161_1019_config,
+ &d->i2c_adap);
+ if (adap->fe[fe_id]) {
+ state->num_frontends++;
+ adap_state->fe_init = adap->fe[fe_id]->ops.init;
+ adap->fe[fe_id]->ops.init = mxl111sf_adap_fe_init;
+ adap_state->fe_sleep = adap->fe[fe_id]->ops.sleep;
+ adap->fe[fe_id]->ops.sleep = mxl111sf_adap_fe_sleep;
+ return 0;
+ }
+ ret = -EIO;
+fail:
+ return ret;
+}
+
+static struct lg2160_config hauppauge_lg2161_1019_ep6_config = {
+ .lg_chip = LG2161_1019,
+ .i2c_addr = 0x1c >> 1,
+ .deny_i2c_rptr = 1,
+ .spectral_inversion = 0,
+ .if_khz = 6000,
+ .output_if = 1, /* LG2161_OIF_SERIAL_TS */
+};
+
+static struct lg2160_config hauppauge_lg2161_1040_ep6_config = {
+ .lg_chip = LG2161_1040,
+ .i2c_addr = 0x1c >> 1,
+ .deny_i2c_rptr = 1,
+ .spectral_inversion = 0,
+ .if_khz = 6000,
+ .output_if = 7, /* LG2161_OIF_SERIAL_TS */
+};
+
+static int mxl111sf_lg2161_ep6_frontend_attach(struct dvb_usb_adapter *adap, u8 fe_id)
+{
+ struct dvb_usb_device *d = adap_to_d(adap);
+ struct mxl111sf_state *state = d_to_priv(d);
+ struct mxl111sf_adap_state *adap_state = &state->adap_state[fe_id];
+ int ret;
+
+ pr_debug("%s()\n", __func__);
+
+ /* save a pointer to the dvb_usb_device in device state */
+ state->d = d;
+ adap_state->alt_mode = (dvb_usb_mxl111sf_isoc) ? 2 : 1;
+ state->alt_mode = adap_state->alt_mode;
+
+ if (usb_set_interface(d->udev, 0, state->alt_mode) < 0)
+ pr_err("set interface failed");
+
+ state->gpio_mode = MXL111SF_GPIO_MOD_MH;
+ adap_state->gpio_mode = state->gpio_mode;
+ adap_state->device_mode = MXL_TUNER_MODE;
+ adap_state->ep6_clockphase = 0;
+
+ ret = mxl1x1sf_soft_reset(state);
+ if (mxl_fail(ret))
+ goto fail;
+ ret = mxl111sf_init_tuner_demod(state);
+ if (mxl_fail(ret))
+ goto fail;
+
+ ret = mxl1x1sf_set_device_mode(state, adap_state->device_mode);
+ if (mxl_fail(ret))
+ goto fail;
+
+ ret = mxl111sf_enable_usb_output(state);
+ if (mxl_fail(ret))
+ goto fail;
+ ret = mxl1x1sf_top_master_ctrl(state, 1);
+ if (mxl_fail(ret))
+ goto fail;
+
+ ret = mxl111sf_init_port_expander(state);
+ if (mxl_fail(ret))
+ goto fail;
+ ret = mxl111sf_gpio_mode_switch(state, state->gpio_mode);
+ if (mxl_fail(ret))
+ goto fail;
+
+ ret = get_chip_info(state);
+ if (mxl_fail(ret))
+ goto fail;
+
+ adap->fe[fe_id] = dvb_attach(lg2160_attach,
+ (MXL111SF_V8_200 == state->chip_rev) ?
+ &hauppauge_lg2161_1040_ep6_config :
+ &hauppauge_lg2161_1019_ep6_config,
+ &d->i2c_adap);
+ if (adap->fe[fe_id]) {
+ state->num_frontends++;
+ adap_state->fe_init = adap->fe[fe_id]->ops.init;
+ adap->fe[fe_id]->ops.init = mxl111sf_adap_fe_init;
+ adap_state->fe_sleep = adap->fe[fe_id]->ops.sleep;
+ adap->fe[fe_id]->ops.sleep = mxl111sf_adap_fe_sleep;
+ return 0;
+ }
+ ret = -EIO;
+fail:
+ return ret;
+}
+
+static struct mxl111sf_demod_config mxl_demod_config = {
+ .read_reg = mxl111sf_read_reg,
+ .write_reg = mxl111sf_write_reg,
+ .program_regs = mxl111sf_ctrl_program_regs,
+};
+
+static int mxl111sf_attach_demod(struct dvb_usb_adapter *adap, u8 fe_id)
+{
+ struct dvb_usb_device *d = adap_to_d(adap);
+ struct mxl111sf_state *state = d_to_priv(d);
+ struct mxl111sf_adap_state *adap_state = &state->adap_state[fe_id];
+ int ret;
+
+ pr_debug("%s()\n", __func__);
+
+ /* save a pointer to the dvb_usb_device in device state */
+ state->d = d;
+ adap_state->alt_mode = (dvb_usb_mxl111sf_isoc) ? 1 : 2;
+ state->alt_mode = adap_state->alt_mode;
+
+ if (usb_set_interface(d->udev, 0, state->alt_mode) < 0)
+ pr_err("set interface failed");
+
+ state->gpio_mode = MXL111SF_GPIO_MOD_DVBT;
+ adap_state->gpio_mode = state->gpio_mode;
+ adap_state->device_mode = MXL_SOC_MODE;
+ adap_state->ep6_clockphase = 1;
+
+ ret = mxl1x1sf_soft_reset(state);
+ if (mxl_fail(ret))
+ goto fail;
+ ret = mxl111sf_init_tuner_demod(state);
+ if (mxl_fail(ret))
+ goto fail;
+
+ ret = mxl1x1sf_set_device_mode(state, adap_state->device_mode);
+ if (mxl_fail(ret))
+ goto fail;
+
+ ret = mxl111sf_enable_usb_output(state);
+ if (mxl_fail(ret))
+ goto fail;
+ ret = mxl1x1sf_top_master_ctrl(state, 1);
+ if (mxl_fail(ret))
+ goto fail;
+
+ /* dont care if this fails */
+ mxl111sf_init_port_expander(state);
+
+ adap->fe[fe_id] = dvb_attach(mxl111sf_demod_attach, state,
+ &mxl_demod_config);
+ if (adap->fe[fe_id]) {
+ state->num_frontends++;
+ adap_state->fe_init = adap->fe[fe_id]->ops.init;
+ adap->fe[fe_id]->ops.init = mxl111sf_adap_fe_init;
+ adap_state->fe_sleep = adap->fe[fe_id]->ops.sleep;
+ adap->fe[fe_id]->ops.sleep = mxl111sf_adap_fe_sleep;
+ return 0;
+ }
+ ret = -EIO;
+fail:
+ return ret;
+}
+
+static inline int mxl111sf_set_ant_path(struct mxl111sf_state *state,
+ int antpath)
+{
+ return mxl111sf_idac_config(state, 1, 1,
+ (antpath == ANT_PATH_INTERNAL) ?
+ 0x3f : 0x00, 0);
+}
+
+#define DbgAntHunt(x, pwr0, pwr1, pwr2, pwr3) \
+ pr_err("%s(%d) FINAL input set to %s rxPwr:%d|%d|%d|%d\n", \
+ __func__, __LINE__, \
+ (ANT_PATH_EXTERNAL == x) ? "EXTERNAL" : "INTERNAL", \
+ pwr0, pwr1, pwr2, pwr3)
+
+#define ANT_HUNT_SLEEP 90
+#define ANT_EXT_TWEAK 0
+
+static int mxl111sf_ant_hunt(struct dvb_frontend *fe)
+{
+ struct mxl111sf_state *state = fe_to_priv(fe);
+ int antctrl = dvb_usb_mxl111sf_rfswitch;
+
+ u16 rxPwrA, rxPwr0, rxPwr1, rxPwr2;
+
+ /* FIXME: must force EXTERNAL for QAM - done elsewhere */
+ mxl111sf_set_ant_path(state, antctrl == ANT_PATH_AUTO ?
+ ANT_PATH_EXTERNAL : antctrl);
+
+ if (antctrl == ANT_PATH_AUTO) {
+#if 0
+ msleep(ANT_HUNT_SLEEP);
+#endif
+ fe->ops.tuner_ops.get_rf_strength(fe, &rxPwrA);
+
+ mxl111sf_set_ant_path(state, ANT_PATH_EXTERNAL);
+ msleep(ANT_HUNT_SLEEP);
+ fe->ops.tuner_ops.get_rf_strength(fe, &rxPwr0);
+
+ mxl111sf_set_ant_path(state, ANT_PATH_EXTERNAL);
+ msleep(ANT_HUNT_SLEEP);
+ fe->ops.tuner_ops.get_rf_strength(fe, &rxPwr1);
+
+ mxl111sf_set_ant_path(state, ANT_PATH_INTERNAL);
+ msleep(ANT_HUNT_SLEEP);
+ fe->ops.tuner_ops.get_rf_strength(fe, &rxPwr2);
+
+ if (rxPwr1+ANT_EXT_TWEAK >= rxPwr2) {
+ /* return with EXTERNAL enabled */
+ mxl111sf_set_ant_path(state, ANT_PATH_EXTERNAL);
+ DbgAntHunt(ANT_PATH_EXTERNAL, rxPwrA,
+ rxPwr0, rxPwr1, rxPwr2);
+ } else {
+ /* return with INTERNAL enabled */
+ DbgAntHunt(ANT_PATH_INTERNAL, rxPwrA,
+ rxPwr0, rxPwr1, rxPwr2);
+ }
+ }
+ return 0;
+}
+
+static struct mxl111sf_tuner_config mxl_tuner_config = {
+ .if_freq = MXL_IF_6_0, /* applies to external IF output, only */
+ .invert_spectrum = 0,
+ .read_reg = mxl111sf_read_reg,
+ .write_reg = mxl111sf_write_reg,
+ .program_regs = mxl111sf_ctrl_program_regs,
+ .top_master_ctrl = mxl1x1sf_top_master_ctrl,
+ .ant_hunt = mxl111sf_ant_hunt,
+};
+
+static int mxl111sf_attach_tuner(struct dvb_usb_adapter *adap)
+{
+ struct mxl111sf_state *state = adap_to_priv(adap);
+ int i;
+
+ pr_debug("%s()\n", __func__);
+
+ for (i = 0; i < state->num_frontends; i++) {
+ if (dvb_attach(mxl111sf_tuner_attach, adap->fe[i], state,
+ &mxl_tuner_config) == NULL)
+ return -EIO;
+ adap->fe[i]->ops.read_signal_strength = adap->fe[i]->ops.tuner_ops.get_rf_strength;
+ }
+
+ return 0;
+}
+
+static u32 mxl111sf_i2c_func(struct i2c_adapter *adapter)
+{
+ return I2C_FUNC_I2C;
+}
+
+static struct i2c_algorithm mxl111sf_i2c_algo = {
+ .master_xfer = mxl111sf_i2c_xfer,
+ .functionality = mxl111sf_i2c_func,
+#ifdef NEED_ALGO_CONTROL
+ .algo_control = dummy_algo_control,
+#endif
+};
+
+static int mxl111sf_init(struct dvb_usb_device *d)
+{
+ struct mxl111sf_state *state = d_to_priv(d);
+ int ret;
+ static u8 eeprom[256];
+ struct i2c_client c;
+
+ ret = get_chip_info(state);
+ if (mxl_fail(ret))
+ pr_err("failed to get chip info during probe");
+
+ mutex_init(&state->fe_lock);
+
+ if (state->chip_rev > MXL111SF_V6)
+ mxl111sf_config_pin_mux_modes(state, PIN_MUX_TS_SPI_IN_MODE_1);
+
+ c.adapter = &d->i2c_adap;
+ c.addr = 0xa0 >> 1;
+
+ ret = tveeprom_read(&c, eeprom, sizeof(eeprom));
+ if (mxl_fail(ret))
+ return 0;
+ tveeprom_hauppauge_analog(&c, &state->tv, (0x84 == eeprom[0xa0]) ?
+ eeprom + 0xa0 : eeprom + 0x80);
+#if 0
+ switch (state->tv.model) {
+ case 117001:
+ case 126001:
+ case 138001:
+ break;
+ default:
+ printk(KERN_WARNING "%s: warning: "
+ "unknown hauppauge model #%d\n",
+ __func__, state->tv.model);
+ }
+#endif
+ return 0;
+}
+
+static int mxl111sf_frontend_attach_dvbt(struct dvb_usb_adapter *adap)
+{
+ return mxl111sf_attach_demod(adap, 0);
+}
+
+static int mxl111sf_frontend_attach_atsc(struct dvb_usb_adapter *adap)
+{
+ return mxl111sf_lgdt3305_frontend_attach(adap, 0);
+}
+
+static int mxl111sf_frontend_attach_mh(struct dvb_usb_adapter *adap)
+{
+ return mxl111sf_lg2160_frontend_attach(adap, 0);
+}
+
+static int mxl111sf_frontend_attach_atsc_mh(struct dvb_usb_adapter *adap)
+{
+ int ret;
+ pr_debug("%s\n", __func__);
+
+ ret = mxl111sf_lgdt3305_frontend_attach(adap, 0);
+ if (ret < 0)
+ return ret;
+
+ ret = mxl111sf_attach_demod(adap, 1);
+ if (ret < 0)
+ return ret;
+
+ ret = mxl111sf_lg2160_frontend_attach(adap, 2);
+ if (ret < 0)
+ return ret;
+
+ return ret;
+}
+
+static int mxl111sf_frontend_attach_mercury(struct dvb_usb_adapter *adap)
+{
+ int ret;
+ pr_debug("%s\n", __func__);
+
+ ret = mxl111sf_lgdt3305_frontend_attach(adap, 0);
+ if (ret < 0)
+ return ret;
+
+ ret = mxl111sf_attach_demod(adap, 1);
+ if (ret < 0)
+ return ret;
+
+ ret = mxl111sf_lg2161_ep6_frontend_attach(adap, 2);
+ if (ret < 0)
+ return ret;
+
+ return ret;
+}
+
+static int mxl111sf_frontend_attach_mercury_mh(struct dvb_usb_adapter *adap)
+{
+ int ret;
+ pr_debug("%s\n", __func__);
+
+ ret = mxl111sf_attach_demod(adap, 0);
+ if (ret < 0)
+ return ret;
+
+ if (dvb_usb_mxl111sf_spi)
+ ret = mxl111sf_lg2161_frontend_attach(adap, 1);
+ else
+ ret = mxl111sf_lg2161_ep6_frontend_attach(adap, 1);
+
+ return ret;
+}
+
+static void mxl111sf_stream_config_bulk(struct usb_data_stream_properties *stream, u8 endpoint)
+{
+ pr_debug("%s: endpoint=%d size=8192\n", __func__, endpoint);
+ stream->type = USB_BULK;
+ stream->count = 5;
+ stream->endpoint = endpoint;
+ stream->u.bulk.buffersize = 8192;
+}
+
+static void mxl111sf_stream_config_isoc(struct usb_data_stream_properties *stream,
+ u8 endpoint, int framesperurb, int framesize)
+{
+ pr_debug("%s: endpoint=%d size=%d\n", __func__, endpoint,
+ framesperurb * framesize);
+ stream->type = USB_ISOC;
+ stream->count = 5;
+ stream->endpoint = endpoint;
+ stream->u.isoc.framesperurb = framesperurb;
+ stream->u.isoc.framesize = framesize;
+ stream->u.isoc.interval = 1;
+}
+
+/* DVB USB Driver stuff */
+
+/* dvbt mxl111sf
+ * bulk EP4/BULK/5/8192
+ * isoc EP4/ISOC/5/96/564
+ */
+static int mxl111sf_get_stream_config_dvbt(struct dvb_frontend *fe,
+ u8 *ts_type, struct usb_data_stream_properties *stream)
+{
+ pr_debug("%s: fe=%d\n", __func__, fe->id);
+
+ *ts_type = DVB_USB_FE_TS_TYPE_188;
+ if (dvb_usb_mxl111sf_isoc)
+ mxl111sf_stream_config_isoc(stream, 4, 96, 564);
+ else
+ mxl111sf_stream_config_bulk(stream, 4);
+ return 0;
+}
+
+static struct dvb_usb_device_properties mxl111sf_props_dvbt = {
+ .driver_name = KBUILD_MODNAME,
+ .owner = THIS_MODULE,
+ .adapter_nr = adapter_nr,
+ .size_of_priv = sizeof(struct mxl111sf_state),
+
+ .generic_bulk_ctrl_endpoint = 0x02,
+ .generic_bulk_ctrl_endpoint_response = 0x81,
+
+ .i2c_algo = &mxl111sf_i2c_algo,
+ .frontend_attach = mxl111sf_frontend_attach_dvbt,
+ .tuner_attach = mxl111sf_attach_tuner,
+ .init = mxl111sf_init,
+ .streaming_ctrl = mxl111sf_ep4_streaming_ctrl,
+ .get_stream_config = mxl111sf_get_stream_config_dvbt,
+
+ .num_adapters = 1,
+ .adapter = {
+ {
+ .stream = DVB_USB_STREAM_ISOC(6, 5, 24, 3072, 1),
+ }
+ }
+};
+
+/* atsc lgdt3305
+ * bulk EP6/BULK/5/8192
+ * isoc EP6/ISOC/5/24/3072
+ */
+static int mxl111sf_get_stream_config_atsc(struct dvb_frontend *fe,
+ u8 *ts_type, struct usb_data_stream_properties *stream)
+{
+ pr_debug("%s: fe=%d\n", __func__, fe->id);
+
+ *ts_type = DVB_USB_FE_TS_TYPE_188;
+ if (dvb_usb_mxl111sf_isoc)
+ mxl111sf_stream_config_isoc(stream, 6, 24, 3072);
+ else
+ mxl111sf_stream_config_bulk(stream, 6);
+ return 0;
+}
+
+static struct dvb_usb_device_properties mxl111sf_props_atsc = {
+ .driver_name = KBUILD_MODNAME,
+ .owner = THIS_MODULE,
+ .adapter_nr = adapter_nr,
+ .size_of_priv = sizeof(struct mxl111sf_state),
+
+ .generic_bulk_ctrl_endpoint = 0x02,
+ .generic_bulk_ctrl_endpoint_response = 0x81,
+
+ .i2c_algo = &mxl111sf_i2c_algo,
+ .frontend_attach = mxl111sf_frontend_attach_atsc,
+ .tuner_attach = mxl111sf_attach_tuner,
+ .init = mxl111sf_init,
+ .streaming_ctrl = mxl111sf_ep6_streaming_ctrl,
+ .get_stream_config = mxl111sf_get_stream_config_atsc,
+
+ .num_adapters = 1,
+ .adapter = {
+ {
+ .stream = DVB_USB_STREAM_ISOC(6, 5, 24, 3072, 1),
+ }
+ }
+};
+
+/* mh lg2160
+ * bulk EP5/BULK/5/8192/RAW
+ * isoc EP5/ISOC/5/96/200/RAW
+ */
+static int mxl111sf_get_stream_config_mh(struct dvb_frontend *fe,
+ u8 *ts_type, struct usb_data_stream_properties *stream)
+{
+ pr_debug("%s: fe=%d\n", __func__, fe->id);
+
+ *ts_type = DVB_USB_FE_TS_TYPE_RAW;
+ if (dvb_usb_mxl111sf_isoc)
+ mxl111sf_stream_config_isoc(stream, 5, 96, 200);
+ else
+ mxl111sf_stream_config_bulk(stream, 5);
+ return 0;
+}
+
+static struct dvb_usb_device_properties mxl111sf_props_mh = {
+ .driver_name = KBUILD_MODNAME,
+ .owner = THIS_MODULE,
+ .adapter_nr = adapter_nr,
+ .size_of_priv = sizeof(struct mxl111sf_state),
+
+ .generic_bulk_ctrl_endpoint = 0x02,
+ .generic_bulk_ctrl_endpoint_response = 0x81,
+
+ .i2c_algo = &mxl111sf_i2c_algo,
+ .frontend_attach = mxl111sf_frontend_attach_mh,
+ .tuner_attach = mxl111sf_attach_tuner,
+ .init = mxl111sf_init,
+ .streaming_ctrl = mxl111sf_ep5_streaming_ctrl,
+ .get_stream_config = mxl111sf_get_stream_config_mh,
+
+ .num_adapters = 1,
+ .adapter = {
+ {
+ .stream = DVB_USB_STREAM_ISOC(6, 5, 24, 3072, 1),
+ }
+ }
+};
+
+/* atsc mh lgdt3305 mxl111sf lg2160
+ * bulk EP6/BULK/5/8192 EP4/BULK/5/8192 EP5/BULK/5/8192/RAW
+ * isoc EP6/ISOC/5/24/3072 EP4/ISOC/5/96/564 EP5/ISOC/5/96/200/RAW
+ */
+static int mxl111sf_get_stream_config_atsc_mh(struct dvb_frontend *fe,
+ u8 *ts_type, struct usb_data_stream_properties *stream)
+{
+ pr_debug("%s: fe=%d\n", __func__, fe->id);
+
+ if (fe->id == 0) {
+ *ts_type = DVB_USB_FE_TS_TYPE_188;
+ if (dvb_usb_mxl111sf_isoc)
+ mxl111sf_stream_config_isoc(stream, 6, 24, 3072);
+ else
+ mxl111sf_stream_config_bulk(stream, 6);
+ } else if (fe->id == 1) {
+ *ts_type = DVB_USB_FE_TS_TYPE_188;
+ if (dvb_usb_mxl111sf_isoc)
+ mxl111sf_stream_config_isoc(stream, 4, 96, 564);
+ else
+ mxl111sf_stream_config_bulk(stream, 4);
+ } else if (fe->id == 2) {
+ *ts_type = DVB_USB_FE_TS_TYPE_RAW;
+ if (dvb_usb_mxl111sf_isoc)
+ mxl111sf_stream_config_isoc(stream, 5, 96, 200);
+ else
+ mxl111sf_stream_config_bulk(stream, 5);
+ }
+ return 0;
+}
+
+static int mxl111sf_streaming_ctrl_atsc_mh(struct dvb_frontend *fe, int onoff)
+{
+ pr_debug("%s: fe=%d onoff=%d\n", __func__, fe->id, onoff);
+
+ if (fe->id == 0)
+ return mxl111sf_ep6_streaming_ctrl(fe, onoff);
+ else if (fe->id == 1)
+ return mxl111sf_ep4_streaming_ctrl(fe, onoff);
+ else if (fe->id == 2)
+ return mxl111sf_ep5_streaming_ctrl(fe, onoff);
+ return 0;
+}
+
+static struct dvb_usb_device_properties mxl111sf_props_atsc_mh = {
+ .driver_name = KBUILD_MODNAME,
+ .owner = THIS_MODULE,
+ .adapter_nr = adapter_nr,
+ .size_of_priv = sizeof(struct mxl111sf_state),
+
+ .generic_bulk_ctrl_endpoint = 0x02,
+ .generic_bulk_ctrl_endpoint_response = 0x81,
+
+ .i2c_algo = &mxl111sf_i2c_algo,
+ .frontend_attach = mxl111sf_frontend_attach_atsc_mh,
+ .tuner_attach = mxl111sf_attach_tuner,
+ .init = mxl111sf_init,
+ .streaming_ctrl = mxl111sf_streaming_ctrl_atsc_mh,
+ .get_stream_config = mxl111sf_get_stream_config_atsc_mh,
+
+ .num_adapters = 1,
+ .adapter = {
+ {
+ .stream = DVB_USB_STREAM_ISOC(6, 5, 24, 3072, 1),
+ }
+ }
+};
+
+/* mercury lgdt3305 mxl111sf lg2161
+ * tp bulk EP6/BULK/5/8192 EP4/BULK/5/8192 EP6/BULK/5/8192/RAW
+ * tp isoc EP6/ISOC/5/24/3072 EP4/ISOC/5/96/564 EP6/ISOC/5/24/3072/RAW
+ * spi bulk EP6/BULK/5/8192 EP4/BULK/5/8192 EP5/BULK/5/8192/RAW
+ * spi isoc EP6/ISOC/5/24/3072 EP4/ISOC/5/96/564 EP5/ISOC/5/96/200/RAW
+ */
+static int mxl111sf_get_stream_config_mercury(struct dvb_frontend *fe,
+ u8 *ts_type, struct usb_data_stream_properties *stream)
+{
+ pr_debug("%s: fe=%d\n", __func__, fe->id);
+
+ if (fe->id == 0) {
+ *ts_type = DVB_USB_FE_TS_TYPE_188;
+ if (dvb_usb_mxl111sf_isoc)
+ mxl111sf_stream_config_isoc(stream, 6, 24, 3072);
+ else
+ mxl111sf_stream_config_bulk(stream, 6);
+ } else if (fe->id == 1) {
+ *ts_type = DVB_USB_FE_TS_TYPE_188;
+ if (dvb_usb_mxl111sf_isoc)
+ mxl111sf_stream_config_isoc(stream, 4, 96, 564);
+ else
+ mxl111sf_stream_config_bulk(stream, 4);
+ } else if (fe->id == 2 && dvb_usb_mxl111sf_spi) {
+ *ts_type = DVB_USB_FE_TS_TYPE_RAW;
+ if (dvb_usb_mxl111sf_isoc)
+ mxl111sf_stream_config_isoc(stream, 5, 96, 200);
+ else
+ mxl111sf_stream_config_bulk(stream, 5);
+ } else if (fe->id == 2 && !dvb_usb_mxl111sf_spi) {
+ *ts_type = DVB_USB_FE_TS_TYPE_RAW;
+ if (dvb_usb_mxl111sf_isoc)
+ mxl111sf_stream_config_isoc(stream, 6, 24, 3072);
+ else
+ mxl111sf_stream_config_bulk(stream, 6);
+ }
+ return 0;
+}
+
+static int mxl111sf_streaming_ctrl_mercury(struct dvb_frontend *fe, int onoff)
+{
+ pr_debug("%s: fe=%d onoff=%d\n", __func__, fe->id, onoff);
+
+ if (fe->id == 0)
+ return mxl111sf_ep6_streaming_ctrl(fe, onoff);
+ else if (fe->id == 1)
+ return mxl111sf_ep4_streaming_ctrl(fe, onoff);
+ else if (fe->id == 2 && dvb_usb_mxl111sf_spi)
+ return mxl111sf_ep5_streaming_ctrl(fe, onoff);
+ else if (fe->id == 2 && !dvb_usb_mxl111sf_spi)
+ return mxl111sf_ep6_streaming_ctrl(fe, onoff);
+ return 0;
+}
+
+static struct dvb_usb_device_properties mxl111sf_props_mercury = {
+ .driver_name = KBUILD_MODNAME,
+ .owner = THIS_MODULE,
+ .adapter_nr = adapter_nr,
+ .size_of_priv = sizeof(struct mxl111sf_state),
+
+ .generic_bulk_ctrl_endpoint = 0x02,
+ .generic_bulk_ctrl_endpoint_response = 0x81,
+
+ .i2c_algo = &mxl111sf_i2c_algo,
+ .frontend_attach = mxl111sf_frontend_attach_mercury,
+ .tuner_attach = mxl111sf_attach_tuner,
+ .init = mxl111sf_init,
+ .streaming_ctrl = mxl111sf_streaming_ctrl_mercury,
+ .get_stream_config = mxl111sf_get_stream_config_mercury,
+
+ .num_adapters = 1,
+ .adapter = {
+ {
+ .stream = DVB_USB_STREAM_ISOC(6, 5, 24, 3072, 1),
+ }
+ }
+};
+
+/* mercury mh mxl111sf lg2161
+ * tp bulk EP4/BULK/5/8192 EP6/BULK/5/8192/RAW
+ * tp isoc EP4/ISOC/5/96/564 EP6/ISOC/5/24/3072/RAW
+ * spi bulk EP4/BULK/5/8192 EP5/BULK/5/8192/RAW
+ * spi isoc EP4/ISOC/5/96/564 EP5/ISOC/5/96/200/RAW
+ */
+static int mxl111sf_get_stream_config_mercury_mh(struct dvb_frontend *fe,
+ u8 *ts_type, struct usb_data_stream_properties *stream)
+{
+ pr_debug("%s: fe=%d\n", __func__, fe->id);
+
+ if (fe->id == 0) {
+ *ts_type = DVB_USB_FE_TS_TYPE_188;
+ if (dvb_usb_mxl111sf_isoc)
+ mxl111sf_stream_config_isoc(stream, 4, 96, 564);
+ else
+ mxl111sf_stream_config_bulk(stream, 4);
+ } else if (fe->id == 1 && dvb_usb_mxl111sf_spi) {
+ *ts_type = DVB_USB_FE_TS_TYPE_RAW;
+ if (dvb_usb_mxl111sf_isoc)
+ mxl111sf_stream_config_isoc(stream, 5, 96, 200);
+ else
+ mxl111sf_stream_config_bulk(stream, 5);
+ } else if (fe->id == 1 && !dvb_usb_mxl111sf_spi) {
+ *ts_type = DVB_USB_FE_TS_TYPE_RAW;
+ if (dvb_usb_mxl111sf_isoc)
+ mxl111sf_stream_config_isoc(stream, 6, 24, 3072);
+ else
+ mxl111sf_stream_config_bulk(stream, 6);
+ }
+ return 0;
+}
+
+static int mxl111sf_streaming_ctrl_mercury_mh(struct dvb_frontend *fe, int onoff)
+{
+ pr_debug("%s: fe=%d onoff=%d\n", __func__, fe->id, onoff);
+
+ if (fe->id == 0)
+ return mxl111sf_ep4_streaming_ctrl(fe, onoff);
+ else if (fe->id == 1 && dvb_usb_mxl111sf_spi)
+ return mxl111sf_ep5_streaming_ctrl(fe, onoff);
+ else if (fe->id == 1 && !dvb_usb_mxl111sf_spi)
+ return mxl111sf_ep6_streaming_ctrl(fe, onoff);
+ return 0;
+}
+
+static struct dvb_usb_device_properties mxl111sf_props_mercury_mh = {
+ .driver_name = KBUILD_MODNAME,
+ .owner = THIS_MODULE,
+ .adapter_nr = adapter_nr,
+ .size_of_priv = sizeof(struct mxl111sf_state),
+
+ .generic_bulk_ctrl_endpoint = 0x02,
+ .generic_bulk_ctrl_endpoint_response = 0x81,
+
+ .i2c_algo = &mxl111sf_i2c_algo,
+ .frontend_attach = mxl111sf_frontend_attach_mercury_mh,
+ .tuner_attach = mxl111sf_attach_tuner,
+ .init = mxl111sf_init,
+ .streaming_ctrl = mxl111sf_streaming_ctrl_mercury_mh,
+ .get_stream_config = mxl111sf_get_stream_config_mercury_mh,
+
+ .num_adapters = 1,
+ .adapter = {
+ {
+ .stream = DVB_USB_STREAM_ISOC(6, 5, 24, 3072, 1),
+ }
+ }
+};
+
+static const struct usb_device_id mxl111sf_id_table[] = {
+ { DVB_USB_DEVICE(USB_VID_HAUPPAUGE, 0xc600, &mxl111sf_props_atsc_mh, "Hauppauge 126xxx ATSC+", NULL) },
+ { DVB_USB_DEVICE(USB_VID_HAUPPAUGE, 0xc601, &mxl111sf_props_atsc, "Hauppauge 126xxx ATSC", NULL) },
+ { DVB_USB_DEVICE(USB_VID_HAUPPAUGE, 0xc602, &mxl111sf_props_mh, "HCW 126xxx", NULL) },
+ { DVB_USB_DEVICE(USB_VID_HAUPPAUGE, 0xc603, &mxl111sf_props_atsc_mh, "Hauppauge 126xxx ATSC+", NULL) },
+ { DVB_USB_DEVICE(USB_VID_HAUPPAUGE, 0xc604, &mxl111sf_props_dvbt, "Hauppauge 126xxx DVBT", NULL) },
+ { DVB_USB_DEVICE(USB_VID_HAUPPAUGE, 0xc609, &mxl111sf_props_atsc, "Hauppauge 126xxx ATSC", NULL) },
+ { DVB_USB_DEVICE(USB_VID_HAUPPAUGE, 0xc60a, &mxl111sf_props_mh, "HCW 126xxx", NULL) },
+ { DVB_USB_DEVICE(USB_VID_HAUPPAUGE, 0xc60b, &mxl111sf_props_atsc_mh, "Hauppauge 126xxx ATSC+", NULL) },
+ { DVB_USB_DEVICE(USB_VID_HAUPPAUGE, 0xc60c, &mxl111sf_props_dvbt, "Hauppauge 126xxx DVBT", NULL) },
+ { DVB_USB_DEVICE(USB_VID_HAUPPAUGE, 0xc653, &mxl111sf_props_atsc_mh, "Hauppauge 126xxx ATSC+", NULL) },
+ { DVB_USB_DEVICE(USB_VID_HAUPPAUGE, 0xc65b, &mxl111sf_props_atsc_mh, "Hauppauge 126xxx ATSC+", NULL) },
+ { DVB_USB_DEVICE(USB_VID_HAUPPAUGE, 0xb700, &mxl111sf_props_atsc_mh, "Hauppauge 117xxx ATSC+", NULL) },
+ { DVB_USB_DEVICE(USB_VID_HAUPPAUGE, 0xb701, &mxl111sf_props_atsc, "Hauppauge 126xxx ATSC", NULL) },
+ { DVB_USB_DEVICE(USB_VID_HAUPPAUGE, 0xb702, &mxl111sf_props_mh, "HCW 117xxx", NULL) },
+ { DVB_USB_DEVICE(USB_VID_HAUPPAUGE, 0xb703, &mxl111sf_props_atsc_mh, "Hauppauge 117xxx ATSC+", NULL) },
+ { DVB_USB_DEVICE(USB_VID_HAUPPAUGE, 0xb704, &mxl111sf_props_dvbt, "Hauppauge 117xxx DVBT", NULL) },
+ { DVB_USB_DEVICE(USB_VID_HAUPPAUGE, 0xb753, &mxl111sf_props_atsc_mh, "Hauppauge 117xxx ATSC+", NULL) },
+ { DVB_USB_DEVICE(USB_VID_HAUPPAUGE, 0xb763, &mxl111sf_props_atsc_mh, "Hauppauge 117xxx ATSC+", NULL) },
+ { DVB_USB_DEVICE(USB_VID_HAUPPAUGE, 0xb764, &mxl111sf_props_dvbt, "Hauppauge 117xxx DVBT", NULL) },
+ { DVB_USB_DEVICE(USB_VID_HAUPPAUGE, 0xd853, &mxl111sf_props_mercury, "Hauppauge Mercury", NULL) },
+ { DVB_USB_DEVICE(USB_VID_HAUPPAUGE, 0xd854, &mxl111sf_props_dvbt, "Hauppauge 138xxx DVBT", NULL) },
+ { DVB_USB_DEVICE(USB_VID_HAUPPAUGE, 0xd863, &mxl111sf_props_mercury, "Hauppauge Mercury", NULL) },
+ { DVB_USB_DEVICE(USB_VID_HAUPPAUGE, 0xd864, &mxl111sf_props_dvbt, "Hauppauge 138xxx DVBT", NULL) },
+ { DVB_USB_DEVICE(USB_VID_HAUPPAUGE, 0xd8d3, &mxl111sf_props_mercury, "Hauppauge Mercury", NULL) },
+ { DVB_USB_DEVICE(USB_VID_HAUPPAUGE, 0xd8d4, &mxl111sf_props_dvbt, "Hauppauge 138xxx DVBT", NULL) },
+ { DVB_USB_DEVICE(USB_VID_HAUPPAUGE, 0xd8e3, &mxl111sf_props_mercury, "Hauppauge Mercury", NULL) },
+ { DVB_USB_DEVICE(USB_VID_HAUPPAUGE, 0xd8e4, &mxl111sf_props_dvbt, "Hauppauge 138xxx DVBT", NULL) },
+ { DVB_USB_DEVICE(USB_VID_HAUPPAUGE, 0xd8ff, &mxl111sf_props_mercury, "Hauppauge Mercury", NULL) },
+ { DVB_USB_DEVICE(USB_VID_HAUPPAUGE, 0xc612, &mxl111sf_props_mercury_mh, "Hauppauge 126xxx", NULL) },
+ { DVB_USB_DEVICE(USB_VID_HAUPPAUGE, 0xc613, &mxl111sf_props_mercury, "Hauppauge WinTV-Aero-M", NULL) },
+ { DVB_USB_DEVICE(USB_VID_HAUPPAUGE, 0xc61a, &mxl111sf_props_mercury_mh, "Hauppauge 126xxx", NULL) },
+ { DVB_USB_DEVICE(USB_VID_HAUPPAUGE, 0xc61b, &mxl111sf_props_mercury, "Hauppauge WinTV-Aero-M", NULL) },
+ { DVB_USB_DEVICE(USB_VID_HAUPPAUGE, 0xb757, &mxl111sf_props_atsc_mh, "Hauppauge 117xxx ATSC+", NULL) },
+ { DVB_USB_DEVICE(USB_VID_HAUPPAUGE, 0xb767, &mxl111sf_props_atsc_mh, "Hauppauge 117xxx ATSC+", NULL) },
+ { }
+};
+MODULE_DEVICE_TABLE(usb, mxl111sf_id_table);
+
+static struct usb_driver mxl111sf_usb_driver = {
+ .name = KBUILD_MODNAME,
+ .id_table = mxl111sf_id_table,
+ .probe = dvb_usbv2_probe,
+ .disconnect = dvb_usbv2_disconnect,
+ .suspend = dvb_usbv2_suspend,
+ .resume = dvb_usbv2_resume,
+ .no_dynamic_id = 1,
+ .soft_unbind = 1,
+};
+
+module_usb_driver(mxl111sf_usb_driver);
+
+MODULE_AUTHOR("Michael Krufky <mkrufky@linuxtv.org>");
+MODULE_DESCRIPTION("Driver for MaxLinear MxL111SF");
+MODULE_VERSION("1.0");
+MODULE_LICENSE("GPL");
diff --git a/kernel/drivers/media/usb/dvb-usb-v2/mxl111sf.h b/kernel/drivers/media/usb/dvb-usb-v2/mxl111sf.h
new file mode 100644
index 000000000..ee70df1f1
--- /dev/null
+++ b/kernel/drivers/media/usb/dvb-usb-v2/mxl111sf.h
@@ -0,0 +1,154 @@
+/*
+ * Copyright (C) 2010-2014 Michael Krufky (mkrufky@linuxtv.org)
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation, version 2.
+ *
+ * see Documentation/dvb/README.dvb-usb for more information
+ */
+
+#ifndef _DVB_USB_MXL111SF_H_
+#define _DVB_USB_MXL111SF_H_
+
+#ifdef DVB_USB_LOG_PREFIX
+#undef DVB_USB_LOG_PREFIX
+#endif
+#define DVB_USB_LOG_PREFIX "mxl111sf"
+#include "dvb_usb.h"
+#include <media/tveeprom.h>
+
+#define MXL_EP1_REG_READ 1
+#define MXL_EP2_REG_WRITE 2
+#define MXL_EP3_INTERRUPT 3
+#define MXL_EP4_MPEG2 4
+#define MXL_EP5_I2S 5
+#define MXL_EP6_656 6
+#define MXL_EP6_MPEG2 6
+
+#ifdef USING_ENUM_mxl111sf_current_mode
+enum mxl111sf_current_mode {
+ mxl_mode_dvbt = MXL_EP4_MPEG2,
+ mxl_mode_mh = MXL_EP5_I2S,
+ mxl_mode_atsc = MXL_EP6_MPEG2,
+};
+#endif
+
+enum mxl111sf_gpio_port_expander {
+ mxl111sf_gpio_hw,
+ mxl111sf_PCA9534,
+};
+
+struct mxl111sf_adap_state {
+ int alt_mode;
+ int gpio_mode;
+ int device_mode;
+ int ep6_clockphase;
+ int (*fe_init)(struct dvb_frontend *);
+ int (*fe_sleep)(struct dvb_frontend *);
+};
+
+struct mxl111sf_state {
+ struct dvb_usb_device *d;
+
+ enum mxl111sf_gpio_port_expander gpio_port_expander;
+ u8 port_expander_addr;
+
+ u8 chip_id;
+ u8 chip_ver;
+#define MXL111SF_V6 1
+#define MXL111SF_V8_100 2
+#define MXL111SF_V8_200 3
+ u8 chip_rev;
+
+#ifdef USING_ENUM_mxl111sf_current_mode
+ enum mxl111sf_current_mode current_mode;
+#endif
+
+#define MXL_TUNER_MODE 0
+#define MXL_SOC_MODE 1
+#define MXL_DEV_MODE_MASK 0x01
+#if 1
+ int device_mode;
+#endif
+ /* use usb alt setting 1 for EP4 ISOC transfer (dvb-t),
+ EP5 BULK transfer (atsc-mh),
+ EP6 BULK transfer (atsc/qam),
+ use usb alt setting 2 for EP4 BULK transfer (dvb-t),
+ EP5 ISOC transfer (atsc-mh),
+ EP6 ISOC transfer (atsc/qam),
+ */
+ int alt_mode;
+ int gpio_mode;
+ struct tveeprom tv;
+
+ struct mutex fe_lock;
+ u8 num_frontends;
+ struct mxl111sf_adap_state adap_state[3];
+};
+
+int mxl111sf_read_reg(struct mxl111sf_state *state, u8 addr, u8 *data);
+int mxl111sf_write_reg(struct mxl111sf_state *state, u8 addr, u8 data);
+
+struct mxl111sf_reg_ctrl_info {
+ u8 addr;
+ u8 mask;
+ u8 data;
+};
+
+int mxl111sf_write_reg_mask(struct mxl111sf_state *state,
+ u8 addr, u8 mask, u8 data);
+int mxl111sf_ctrl_program_regs(struct mxl111sf_state *state,
+ struct mxl111sf_reg_ctrl_info *ctrl_reg_info);
+
+/* needed for hardware i2c functions in mxl111sf-i2c.c:
+ * mxl111sf_i2c_send_data / mxl111sf_i2c_get_data */
+int mxl111sf_ctrl_msg(struct dvb_usb_device *d,
+ u8 cmd, u8 *wbuf, int wlen, u8 *rbuf, int rlen);
+
+#define mxl_printk(kern, fmt, arg...) \
+ printk(kern "%s: " fmt "\n", __func__, ##arg)
+
+#define mxl_info(fmt, arg...) \
+ mxl_printk(KERN_INFO, fmt, ##arg)
+
+extern int dvb_usb_mxl111sf_debug;
+#define mxl_debug(fmt, arg...) \
+ if (dvb_usb_mxl111sf_debug) \
+ mxl_printk(KERN_DEBUG, fmt, ##arg)
+
+#define MXL_I2C_DBG 0x04
+#define MXL_ADV_DBG 0x10
+#define mxl_debug_adv(fmt, arg...) \
+ if (dvb_usb_mxl111sf_debug & MXL_ADV_DBG) \
+ mxl_printk(KERN_DEBUG, fmt, ##arg)
+
+#define mxl_i2c(fmt, arg...) \
+ if (dvb_usb_mxl111sf_debug & MXL_I2C_DBG) \
+ mxl_printk(KERN_DEBUG, fmt, ##arg)
+
+#define mxl_i2c_adv(fmt, arg...) \
+ if ((dvb_usb_mxl111sf_debug & (MXL_I2C_DBG | MXL_ADV_DBG)) == \
+ (MXL_I2C_DBG | MXL_ADV_DBG)) \
+ mxl_printk(KERN_DEBUG, fmt, ##arg)
+
+/* The following allows the mxl_fail() macro defined below to work
+ * in externel modules, such as mxl111sf-tuner.ko, even though
+ * dvb_usb_mxl111sf_debug is not defined within those modules */
+#if (defined(__MXL111SF_TUNER_H__)) || (defined(__MXL111SF_DEMOD_H__))
+#define MXL_ADV_DEBUG_ENABLED MXL_ADV_DBG
+#else
+#define MXL_ADV_DEBUG_ENABLED dvb_usb_mxl111sf_debug
+#endif
+
+#define mxl_fail(ret) \
+({ \
+ int __ret; \
+ __ret = (ret < 0); \
+ if ((__ret) && (MXL_ADV_DEBUG_ENABLED & MXL_ADV_DBG)) \
+ mxl_printk(KERN_ERR, "error %d on line %d", \
+ ret, __LINE__); \
+ __ret; \
+})
+
+#endif /* _DVB_USB_MXL111SF_H_ */
diff --git a/kernel/drivers/media/usb/dvb-usb-v2/rtl28xxu.c b/kernel/drivers/media/usb/dvb-usb-v2/rtl28xxu.c
new file mode 100644
index 000000000..895441fe9
--- /dev/null
+++ b/kernel/drivers/media/usb/dvb-usb-v2/rtl28xxu.c
@@ -0,0 +1,1788 @@
+/*
+ * Realtek RTL28xxU DVB USB driver
+ *
+ * Copyright (C) 2009 Antti Palosaari <crope@iki.fi>
+ * Copyright (C) 2011 Antti Palosaari <crope@iki.fi>
+ * Copyright (C) 2012 Thomas Mair <thomas.mair86@googlemail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+
+#include "rtl28xxu.h"
+
+static int rtl28xxu_disable_rc;
+module_param_named(disable_rc, rtl28xxu_disable_rc, int, 0644);
+MODULE_PARM_DESC(disable_rc, "disable RTL2832U remote controller");
+DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
+
+static int rtl28xxu_ctrl_msg(struct dvb_usb_device *d, struct rtl28xxu_req *req)
+{
+ struct rtl28xxu_dev *dev = d->priv;
+ int ret;
+ unsigned int pipe;
+ u8 requesttype;
+
+ if (req->index & CMD_WR_FLAG) {
+ /* write */
+ memcpy(dev->buf, req->data, req->size);
+ requesttype = (USB_TYPE_VENDOR | USB_DIR_OUT);
+ pipe = usb_sndctrlpipe(d->udev, 0);
+ } else {
+ /* read */
+ requesttype = (USB_TYPE_VENDOR | USB_DIR_IN);
+ pipe = usb_rcvctrlpipe(d->udev, 0);
+ }
+
+ ret = usb_control_msg(d->udev, pipe, 0, requesttype, req->value,
+ req->index, dev->buf, req->size, 1000);
+ dvb_usb_dbg_usb_control_msg(d->udev, 0, requesttype, req->value,
+ req->index, dev->buf, req->size);
+ if (ret < 0)
+ goto err;
+
+ /* read request, copy returned data to return buf */
+ if (requesttype == (USB_TYPE_VENDOR | USB_DIR_IN))
+ memcpy(req->data, dev->buf, req->size);
+
+ return 0;
+err:
+ dev_dbg(&d->intf->dev, "failed=%d\n", ret);
+ return ret;
+}
+
+static int rtl28xxu_wr_regs(struct dvb_usb_device *d, u16 reg, u8 *val, int len)
+{
+ struct rtl28xxu_req req;
+
+ if (reg < 0x3000)
+ req.index = CMD_USB_WR;
+ else if (reg < 0x4000)
+ req.index = CMD_SYS_WR;
+ else
+ req.index = CMD_IR_WR;
+
+ req.value = reg;
+ req.size = len;
+ req.data = val;
+
+ return rtl28xxu_ctrl_msg(d, &req);
+}
+
+static int rtl28xxu_rd_regs(struct dvb_usb_device *d, u16 reg, u8 *val, int len)
+{
+ struct rtl28xxu_req req;
+
+ if (reg < 0x3000)
+ req.index = CMD_USB_RD;
+ else if (reg < 0x4000)
+ req.index = CMD_SYS_RD;
+ else
+ req.index = CMD_IR_RD;
+
+ req.value = reg;
+ req.size = len;
+ req.data = val;
+
+ return rtl28xxu_ctrl_msg(d, &req);
+}
+
+static int rtl28xxu_wr_reg(struct dvb_usb_device *d, u16 reg, u8 val)
+{
+ return rtl28xxu_wr_regs(d, reg, &val, 1);
+}
+
+static int rtl28xxu_rd_reg(struct dvb_usb_device *d, u16 reg, u8 *val)
+{
+ return rtl28xxu_rd_regs(d, reg, val, 1);
+}
+
+static int rtl28xxu_wr_reg_mask(struct dvb_usb_device *d, u16 reg, u8 val,
+ u8 mask)
+{
+ int ret;
+ u8 tmp;
+
+ /* no need for read if whole reg is written */
+ if (mask != 0xff) {
+ ret = rtl28xxu_rd_reg(d, reg, &tmp);
+ if (ret)
+ return ret;
+
+ val &= mask;
+ tmp &= ~mask;
+ val |= tmp;
+ }
+
+ return rtl28xxu_wr_reg(d, reg, val);
+}
+
+/* I2C */
+static int rtl28xxu_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msg[],
+ int num)
+{
+ int ret;
+ struct dvb_usb_device *d = i2c_get_adapdata(adap);
+ struct rtl28xxu_dev *dev = d->priv;
+ struct rtl28xxu_req req;
+
+ /*
+ * It is not known which are real I2C bus xfer limits, but testing
+ * with RTL2831U + MT2060 gives max RD 24 and max WR 22 bytes.
+ * TODO: find out RTL2832U lens
+ */
+
+ /*
+ * I2C adapter logic looks rather complicated due to fact it handles
+ * three different access methods. Those methods are;
+ * 1) integrated demod access
+ * 2) old I2C access
+ * 3) new I2C access
+ *
+ * Used method is selected in order 1, 2, 3. Method 3 can handle all
+ * requests but there is two reasons why not use it always;
+ * 1) It is most expensive, usually two USB messages are needed
+ * 2) At least RTL2831U does not support it
+ *
+ * Method 3 is needed in case of I2C write+read (typical register read)
+ * where write is more than one byte.
+ */
+
+ if (mutex_lock_interruptible(&d->i2c_mutex) < 0)
+ return -EAGAIN;
+
+ if (num == 2 && !(msg[0].flags & I2C_M_RD) &&
+ (msg[1].flags & I2C_M_RD)) {
+ if (msg[0].len > 24 || msg[1].len > 24) {
+ /* TODO: check msg[0].len max */
+ ret = -EOPNOTSUPP;
+ goto err_mutex_unlock;
+ } else if (msg[0].addr == 0x10) {
+ /* method 1 - integrated demod */
+ req.value = (msg[0].buf[0] << 8) | (msg[0].addr << 1);
+ req.index = CMD_DEMOD_RD | dev->page;
+ req.size = msg[1].len;
+ req.data = &msg[1].buf[0];
+ ret = rtl28xxu_ctrl_msg(d, &req);
+ } else if (msg[0].len < 2) {
+ /* method 2 - old I2C */
+ req.value = (msg[0].buf[0] << 8) | (msg[0].addr << 1);
+ req.index = CMD_I2C_RD;
+ req.size = msg[1].len;
+ req.data = &msg[1].buf[0];
+ ret = rtl28xxu_ctrl_msg(d, &req);
+ } else {
+ /* method 3 - new I2C */
+ req.value = (msg[0].addr << 1);
+ req.index = CMD_I2C_DA_WR;
+ req.size = msg[0].len;
+ req.data = msg[0].buf;
+ ret = rtl28xxu_ctrl_msg(d, &req);
+ if (ret)
+ goto err_mutex_unlock;
+
+ req.value = (msg[0].addr << 1);
+ req.index = CMD_I2C_DA_RD;
+ req.size = msg[1].len;
+ req.data = msg[1].buf;
+ ret = rtl28xxu_ctrl_msg(d, &req);
+ }
+ } else if (num == 1 && !(msg[0].flags & I2C_M_RD)) {
+ if (msg[0].len > 22) {
+ /* TODO: check msg[0].len max */
+ ret = -EOPNOTSUPP;
+ goto err_mutex_unlock;
+ } else if (msg[0].addr == 0x10) {
+ /* method 1 - integrated demod */
+ if (msg[0].buf[0] == 0x00) {
+ /* save demod page for later demod access */
+ dev->page = msg[0].buf[1];
+ ret = 0;
+ } else {
+ req.value = (msg[0].buf[0] << 8) |
+ (msg[0].addr << 1);
+ req.index = CMD_DEMOD_WR | dev->page;
+ req.size = msg[0].len-1;
+ req.data = &msg[0].buf[1];
+ ret = rtl28xxu_ctrl_msg(d, &req);
+ }
+ } else if (msg[0].len < 23) {
+ /* method 2 - old I2C */
+ req.value = (msg[0].buf[0] << 8) | (msg[0].addr << 1);
+ req.index = CMD_I2C_WR;
+ req.size = msg[0].len-1;
+ req.data = &msg[0].buf[1];
+ ret = rtl28xxu_ctrl_msg(d, &req);
+ } else {
+ /* method 3 - new I2C */
+ req.value = (msg[0].addr << 1);
+ req.index = CMD_I2C_DA_WR;
+ req.size = msg[0].len;
+ req.data = msg[0].buf;
+ ret = rtl28xxu_ctrl_msg(d, &req);
+ }
+ } else {
+ ret = -EINVAL;
+ }
+
+err_mutex_unlock:
+ mutex_unlock(&d->i2c_mutex);
+
+ return ret ? ret : num;
+}
+
+static u32 rtl28xxu_i2c_func(struct i2c_adapter *adapter)
+{
+ return I2C_FUNC_I2C;
+}
+
+static struct i2c_algorithm rtl28xxu_i2c_algo = {
+ .master_xfer = rtl28xxu_i2c_xfer,
+ .functionality = rtl28xxu_i2c_func,
+};
+
+static int rtl2831u_read_config(struct dvb_usb_device *d)
+{
+ struct rtl28xxu_dev *dev = d_to_priv(d);
+ int ret;
+ u8 buf[1];
+ /* open RTL2831U/RTL2830 I2C gate */
+ struct rtl28xxu_req req_gate_open = {0x0120, 0x0011, 0x0001, "\x08"};
+ /* tuner probes */
+ struct rtl28xxu_req req_mt2060 = {0x00c0, CMD_I2C_RD, 1, buf};
+ struct rtl28xxu_req req_qt1010 = {0x0fc4, CMD_I2C_RD, 1, buf};
+
+ dev_dbg(&d->intf->dev, "\n");
+
+ /*
+ * RTL2831U GPIOs
+ * =========================================================
+ * GPIO0 | tuner#0 | 0 off | 1 on | MXL5005S (?)
+ * GPIO2 | LED | 0 off | 1 on |
+ * GPIO4 | tuner#1 | 0 on | 1 off | MT2060
+ */
+
+ /* GPIO direction */
+ ret = rtl28xxu_wr_reg(d, SYS_GPIO_DIR, 0x0a);
+ if (ret)
+ goto err;
+
+ /* enable as output GPIO0, GPIO2, GPIO4 */
+ ret = rtl28xxu_wr_reg(d, SYS_GPIO_OUT_EN, 0x15);
+ if (ret)
+ goto err;
+
+ /*
+ * Probe used tuner. We need to know used tuner before demod attach
+ * since there is some demod params needed to set according to tuner.
+ */
+
+ /* demod needs some time to wake up */
+ msleep(20);
+
+ dev->tuner_name = "NONE";
+
+ /* open demod I2C gate */
+ ret = rtl28xxu_ctrl_msg(d, &req_gate_open);
+ if (ret)
+ goto err;
+
+ /* check QT1010 ID(?) register; reg=0f val=2c */
+ ret = rtl28xxu_ctrl_msg(d, &req_qt1010);
+ if (ret == 0 && buf[0] == 0x2c) {
+ dev->tuner = TUNER_RTL2830_QT1010;
+ dev->tuner_name = "QT1010";
+ goto found;
+ }
+
+ /* open demod I2C gate */
+ ret = rtl28xxu_ctrl_msg(d, &req_gate_open);
+ if (ret)
+ goto err;
+
+ /* check MT2060 ID register; reg=00 val=63 */
+ ret = rtl28xxu_ctrl_msg(d, &req_mt2060);
+ if (ret == 0 && buf[0] == 0x63) {
+ dev->tuner = TUNER_RTL2830_MT2060;
+ dev->tuner_name = "MT2060";
+ goto found;
+ }
+
+ /* assume MXL5005S */
+ dev->tuner = TUNER_RTL2830_MXL5005S;
+ dev->tuner_name = "MXL5005S";
+ goto found;
+
+found:
+ dev_dbg(&d->intf->dev, "tuner=%s\n", dev->tuner_name);
+
+ return 0;
+err:
+ dev_dbg(&d->intf->dev, "failed=%d\n", ret);
+ return ret;
+}
+
+static int rtl2832u_read_config(struct dvb_usb_device *d)
+{
+ struct rtl28xxu_dev *dev = d_to_priv(d);
+ int ret;
+ u8 buf[2];
+ /* open RTL2832U/RTL2832 I2C gate */
+ struct rtl28xxu_req req_gate_open = {0x0120, 0x0011, 0x0001, "\x18"};
+ /* close RTL2832U/RTL2832 I2C gate */
+ struct rtl28xxu_req req_gate_close = {0x0120, 0x0011, 0x0001, "\x10"};
+ /* tuner probes */
+ struct rtl28xxu_req req_fc0012 = {0x00c6, CMD_I2C_RD, 1, buf};
+ struct rtl28xxu_req req_fc0013 = {0x00c6, CMD_I2C_RD, 1, buf};
+ struct rtl28xxu_req req_mt2266 = {0x00c0, CMD_I2C_RD, 1, buf};
+ struct rtl28xxu_req req_fc2580 = {0x01ac, CMD_I2C_RD, 1, buf};
+ struct rtl28xxu_req req_mt2063 = {0x00c0, CMD_I2C_RD, 1, buf};
+ struct rtl28xxu_req req_max3543 = {0x00c0, CMD_I2C_RD, 1, buf};
+ struct rtl28xxu_req req_tua9001 = {0x7ec0, CMD_I2C_RD, 2, buf};
+ struct rtl28xxu_req req_mxl5007t = {0xd9c0, CMD_I2C_RD, 1, buf};
+ struct rtl28xxu_req req_e4000 = {0x02c8, CMD_I2C_RD, 1, buf};
+ struct rtl28xxu_req req_tda18272 = {0x00c0, CMD_I2C_RD, 2, buf};
+ struct rtl28xxu_req req_r820t = {0x0034, CMD_I2C_RD, 1, buf};
+ struct rtl28xxu_req req_r828d = {0x0074, CMD_I2C_RD, 1, buf};
+ struct rtl28xxu_req req_mn88472 = {0xff38, CMD_I2C_RD, 1, buf};
+ struct rtl28xxu_req req_mn88473 = {0xff38, CMD_I2C_RD, 1, buf};
+
+ dev_dbg(&d->intf->dev, "\n");
+
+ /* enable GPIO3 and GPIO6 as output */
+ ret = rtl28xxu_wr_reg_mask(d, SYS_GPIO_DIR, 0x00, 0x40);
+ if (ret)
+ goto err;
+
+ ret = rtl28xxu_wr_reg_mask(d, SYS_GPIO_OUT_EN, 0x48, 0x48);
+ if (ret)
+ goto err;
+
+ /*
+ * Probe used tuner. We need to know used tuner before demod attach
+ * since there is some demod params needed to set according to tuner.
+ */
+
+ /* open demod I2C gate */
+ ret = rtl28xxu_ctrl_msg(d, &req_gate_open);
+ if (ret)
+ goto err;
+
+ dev->tuner_name = "NONE";
+
+ /* check FC0012 ID register; reg=00 val=a1 */
+ ret = rtl28xxu_ctrl_msg(d, &req_fc0012);
+ if (ret == 0 && buf[0] == 0xa1) {
+ dev->tuner = TUNER_RTL2832_FC0012;
+ dev->tuner_name = "FC0012";
+ goto tuner_found;
+ }
+
+ /* check FC0013 ID register; reg=00 val=a3 */
+ ret = rtl28xxu_ctrl_msg(d, &req_fc0013);
+ if (ret == 0 && buf[0] == 0xa3) {
+ dev->tuner = TUNER_RTL2832_FC0013;
+ dev->tuner_name = "FC0013";
+ goto tuner_found;
+ }
+
+ /* check MT2266 ID register; reg=00 val=85 */
+ ret = rtl28xxu_ctrl_msg(d, &req_mt2266);
+ if (ret == 0 && buf[0] == 0x85) {
+ dev->tuner = TUNER_RTL2832_MT2266;
+ dev->tuner_name = "MT2266";
+ goto tuner_found;
+ }
+
+ /* check FC2580 ID register; reg=01 val=56 */
+ ret = rtl28xxu_ctrl_msg(d, &req_fc2580);
+ if (ret == 0 && buf[0] == 0x56) {
+ dev->tuner = TUNER_RTL2832_FC2580;
+ dev->tuner_name = "FC2580";
+ goto tuner_found;
+ }
+
+ /* check MT2063 ID register; reg=00 val=9e || 9c */
+ ret = rtl28xxu_ctrl_msg(d, &req_mt2063);
+ if (ret == 0 && (buf[0] == 0x9e || buf[0] == 0x9c)) {
+ dev->tuner = TUNER_RTL2832_MT2063;
+ dev->tuner_name = "MT2063";
+ goto tuner_found;
+ }
+
+ /* check MAX3543 ID register; reg=00 val=38 */
+ ret = rtl28xxu_ctrl_msg(d, &req_max3543);
+ if (ret == 0 && buf[0] == 0x38) {
+ dev->tuner = TUNER_RTL2832_MAX3543;
+ dev->tuner_name = "MAX3543";
+ goto tuner_found;
+ }
+
+ /* check TUA9001 ID register; reg=7e val=2328 */
+ ret = rtl28xxu_ctrl_msg(d, &req_tua9001);
+ if (ret == 0 && buf[0] == 0x23 && buf[1] == 0x28) {
+ dev->tuner = TUNER_RTL2832_TUA9001;
+ dev->tuner_name = "TUA9001";
+ goto tuner_found;
+ }
+
+ /* check MXL5007R ID register; reg=d9 val=14 */
+ ret = rtl28xxu_ctrl_msg(d, &req_mxl5007t);
+ if (ret == 0 && buf[0] == 0x14) {
+ dev->tuner = TUNER_RTL2832_MXL5007T;
+ dev->tuner_name = "MXL5007T";
+ goto tuner_found;
+ }
+
+ /* check E4000 ID register; reg=02 val=40 */
+ ret = rtl28xxu_ctrl_msg(d, &req_e4000);
+ if (ret == 0 && buf[0] == 0x40) {
+ dev->tuner = TUNER_RTL2832_E4000;
+ dev->tuner_name = "E4000";
+ goto tuner_found;
+ }
+
+ /* check TDA18272 ID register; reg=00 val=c760 */
+ ret = rtl28xxu_ctrl_msg(d, &req_tda18272);
+ if (ret == 0 && (buf[0] == 0xc7 || buf[1] == 0x60)) {
+ dev->tuner = TUNER_RTL2832_TDA18272;
+ dev->tuner_name = "TDA18272";
+ goto tuner_found;
+ }
+
+ /* check R820T ID register; reg=00 val=69 */
+ ret = rtl28xxu_ctrl_msg(d, &req_r820t);
+ if (ret == 0 && buf[0] == 0x69) {
+ dev->tuner = TUNER_RTL2832_R820T;
+ dev->tuner_name = "R820T";
+ goto tuner_found;
+ }
+
+ /* check R828D ID register; reg=00 val=69 */
+ ret = rtl28xxu_ctrl_msg(d, &req_r828d);
+ if (ret == 0 && buf[0] == 0x69) {
+ dev->tuner = TUNER_RTL2832_R828D;
+ dev->tuner_name = "R828D";
+ goto tuner_found;
+ }
+
+tuner_found:
+ dev_dbg(&d->intf->dev, "tuner=%s\n", dev->tuner_name);
+
+ /* probe slave demod */
+ if (dev->tuner == TUNER_RTL2832_R828D) {
+ /* power on MN88472 demod on GPIO0 */
+ ret = rtl28xxu_wr_reg_mask(d, SYS_GPIO_OUT_VAL, 0x01, 0x01);
+ if (ret)
+ goto err;
+
+ ret = rtl28xxu_wr_reg_mask(d, SYS_GPIO_DIR, 0x00, 0x01);
+ if (ret)
+ goto err;
+
+ ret = rtl28xxu_wr_reg_mask(d, SYS_GPIO_OUT_EN, 0x01, 0x01);
+ if (ret)
+ goto err;
+
+ /* check MN88472 answers */
+ ret = rtl28xxu_ctrl_msg(d, &req_mn88472);
+ if (ret == 0 && buf[0] == 0x02) {
+ dev_dbg(&d->intf->dev, "MN88472 found\n");
+ dev->slave_demod = SLAVE_DEMOD_MN88472;
+ goto demod_found;
+ }
+
+ ret = rtl28xxu_ctrl_msg(d, &req_mn88473);
+ if (ret == 0 && buf[0] == 0x03) {
+ dev_dbg(&d->intf->dev, "MN88473 found\n");
+ dev->slave_demod = SLAVE_DEMOD_MN88473;
+ goto demod_found;
+ }
+ }
+
+demod_found:
+ /* close demod I2C gate */
+ ret = rtl28xxu_ctrl_msg(d, &req_gate_close);
+ if (ret < 0)
+ goto err;
+
+ return 0;
+err:
+ dev_dbg(&d->intf->dev, "failed=%d\n", ret);
+ return ret;
+}
+
+static int rtl28xxu_read_config(struct dvb_usb_device *d)
+{
+ struct rtl28xxu_dev *dev = d_to_priv(d);
+
+ if (dev->chip_id == CHIP_ID_RTL2831U)
+ return rtl2831u_read_config(d);
+ else
+ return rtl2832u_read_config(d);
+}
+
+static int rtl28xxu_identify_state(struct dvb_usb_device *d, const char **name)
+{
+ struct rtl28xxu_dev *dev = d_to_priv(d);
+ int ret;
+ struct rtl28xxu_req req_demod_i2c = {0x0020, CMD_I2C_DA_RD, 0, NULL};
+
+ dev_dbg(&d->intf->dev, "\n");
+
+ /*
+ * Detect chip type using I2C command that is not supported
+ * by old RTL2831U.
+ */
+ ret = rtl28xxu_ctrl_msg(d, &req_demod_i2c);
+ if (ret == -EPIPE) {
+ dev->chip_id = CHIP_ID_RTL2831U;
+ } else if (ret == 0) {
+ dev->chip_id = CHIP_ID_RTL2832U;
+ } else {
+ dev_err(&d->intf->dev, "chip type detection failed %d\n", ret);
+ goto err;
+ }
+ dev_dbg(&d->intf->dev, "chip_id=%u\n", dev->chip_id);
+
+ return WARM;
+err:
+ dev_dbg(&d->intf->dev, "failed=%d\n", ret);
+ return ret;
+}
+
+static const struct rtl2830_platform_data rtl2830_mt2060_platform_data = {
+ .clk = 28800000,
+ .spec_inv = 1,
+ .vtop = 0x20,
+ .krf = 0x04,
+ .agc_targ_val = 0x2d,
+
+};
+
+static const struct rtl2830_platform_data rtl2830_qt1010_platform_data = {
+ .clk = 28800000,
+ .spec_inv = 1,
+ .vtop = 0x20,
+ .krf = 0x04,
+ .agc_targ_val = 0x2d,
+};
+
+static const struct rtl2830_platform_data rtl2830_mxl5005s_platform_data = {
+ .clk = 28800000,
+ .spec_inv = 0,
+ .vtop = 0x3f,
+ .krf = 0x04,
+ .agc_targ_val = 0x3e,
+};
+
+static int rtl2831u_frontend_attach(struct dvb_usb_adapter *adap)
+{
+ struct dvb_usb_device *d = adap_to_d(adap);
+ struct rtl28xxu_dev *dev = d_to_priv(d);
+ struct rtl2830_platform_data *pdata = &dev->rtl2830_platform_data;
+ struct i2c_board_info board_info;
+ struct i2c_client *client;
+ int ret;
+
+ dev_dbg(&d->intf->dev, "\n");
+
+ switch (dev->tuner) {
+ case TUNER_RTL2830_QT1010:
+ *pdata = rtl2830_qt1010_platform_data;
+ break;
+ case TUNER_RTL2830_MT2060:
+ *pdata = rtl2830_mt2060_platform_data;
+ break;
+ case TUNER_RTL2830_MXL5005S:
+ *pdata = rtl2830_mxl5005s_platform_data;
+ break;
+ default:
+ dev_err(&d->intf->dev, "unknown tuner %s\n", dev->tuner_name);
+ ret = -ENODEV;
+ goto err;
+ }
+
+ /* attach demodulator */
+ memset(&board_info, 0, sizeof(board_info));
+ strlcpy(board_info.type, "rtl2830", I2C_NAME_SIZE);
+ board_info.addr = 0x10;
+ board_info.platform_data = pdata;
+ request_module("%s", board_info.type);
+ client = i2c_new_device(&d->i2c_adap, &board_info);
+ if (client == NULL || client->dev.driver == NULL) {
+ ret = -ENODEV;
+ goto err;
+ }
+
+ if (!try_module_get(client->dev.driver->owner)) {
+ i2c_unregister_device(client);
+ ret = -ENODEV;
+ goto err;
+ }
+
+ adap->fe[0] = pdata->get_dvb_frontend(client);
+ dev->demod_i2c_adapter = pdata->get_i2c_adapter(client);
+
+ dev->i2c_client_demod = client;
+
+ return 0;
+err:
+ dev_dbg(&d->intf->dev, "failed=%d\n", ret);
+ return ret;
+}
+
+static const struct rtl2832_platform_data rtl2832_fc0012_platform_data = {
+ .clk = 28800000,
+ .tuner = TUNER_RTL2832_FC0012
+};
+
+static const struct rtl2832_platform_data rtl2832_fc0013_platform_data = {
+ .clk = 28800000,
+ .tuner = TUNER_RTL2832_FC0013
+};
+
+static const struct rtl2832_platform_data rtl2832_tua9001_platform_data = {
+ .clk = 28800000,
+ .tuner = TUNER_RTL2832_TUA9001,
+};
+
+static const struct rtl2832_platform_data rtl2832_e4000_platform_data = {
+ .clk = 28800000,
+ .tuner = TUNER_RTL2832_E4000,
+};
+
+static const struct rtl2832_platform_data rtl2832_r820t_platform_data = {
+ .clk = 28800000,
+ .tuner = TUNER_RTL2832_R820T,
+};
+
+static int rtl2832u_fc0012_tuner_callback(struct dvb_usb_device *d,
+ int cmd, int arg)
+{
+ int ret;
+ u8 val;
+
+ dev_dbg(&d->intf->dev, "cmd=%d arg=%d\n", cmd, arg);
+
+ switch (cmd) {
+ case FC_FE_CALLBACK_VHF_ENABLE:
+ /* set output values */
+ ret = rtl28xxu_rd_reg(d, SYS_GPIO_OUT_VAL, &val);
+ if (ret)
+ goto err;
+
+ if (arg)
+ val &= 0xbf; /* set GPIO6 low */
+ else
+ val |= 0x40; /* set GPIO6 high */
+
+
+ ret = rtl28xxu_wr_reg(d, SYS_GPIO_OUT_VAL, val);
+ if (ret)
+ goto err;
+ break;
+ default:
+ ret = -EINVAL;
+ goto err;
+ }
+ return 0;
+err:
+ dev_dbg(&d->intf->dev, "failed=%d\n", ret);
+ return ret;
+}
+
+static int rtl2832u_tua9001_tuner_callback(struct dvb_usb_device *d,
+ int cmd, int arg)
+{
+ int ret;
+ u8 val;
+
+ dev_dbg(&d->intf->dev, "cmd=%d arg=%d\n", cmd, arg);
+
+ /*
+ * CEN always enabled by hardware wiring
+ * RESETN GPIO4
+ * RXEN GPIO1
+ */
+
+ switch (cmd) {
+ case TUA9001_CMD_RESETN:
+ if (arg)
+ val = (1 << 4);
+ else
+ val = (0 << 4);
+
+ ret = rtl28xxu_wr_reg_mask(d, SYS_GPIO_OUT_VAL, val, 0x10);
+ if (ret)
+ goto err;
+ break;
+ case TUA9001_CMD_RXEN:
+ if (arg)
+ val = (1 << 1);
+ else
+ val = (0 << 1);
+
+ ret = rtl28xxu_wr_reg_mask(d, SYS_GPIO_OUT_VAL, val, 0x02);
+ if (ret)
+ goto err;
+ break;
+ }
+
+ return 0;
+err:
+ dev_dbg(&d->intf->dev, "failed=%d\n", ret);
+ return ret;
+}
+
+static int rtl2832u_frontend_callback(void *adapter_priv, int component,
+ int cmd, int arg)
+{
+ struct i2c_adapter *adapter = adapter_priv;
+ struct device *parent = adapter->dev.parent;
+ struct i2c_adapter *parent_adapter;
+ struct dvb_usb_device *d;
+ struct rtl28xxu_dev *dev;
+
+ /*
+ * All tuners are connected to demod muxed I2C adapter. We have to
+ * resolve its parent adapter in order to get handle for this driver
+ * private data. That is a bit hackish solution, GPIO or direct driver
+ * callback would be better...
+ */
+ if (parent != NULL && parent->type == &i2c_adapter_type)
+ parent_adapter = to_i2c_adapter(parent);
+ else
+ return -EINVAL;
+
+ d = i2c_get_adapdata(parent_adapter);
+ dev = d->priv;
+
+ dev_dbg(&d->intf->dev, "component=%d cmd=%d arg=%d\n",
+ component, cmd, arg);
+
+ switch (component) {
+ case DVB_FRONTEND_COMPONENT_TUNER:
+ switch (dev->tuner) {
+ case TUNER_RTL2832_FC0012:
+ return rtl2832u_fc0012_tuner_callback(d, cmd, arg);
+ case TUNER_RTL2832_TUA9001:
+ return rtl2832u_tua9001_tuner_callback(d, cmd, arg);
+ }
+ }
+
+ return 0;
+}
+
+static int rtl2832u_frontend_attach(struct dvb_usb_adapter *adap)
+{
+ struct dvb_usb_device *d = adap_to_d(adap);
+ struct rtl28xxu_dev *dev = d_to_priv(d);
+ struct rtl2832_platform_data *pdata = &dev->rtl2832_platform_data;
+ struct i2c_board_info board_info;
+ struct i2c_client *client;
+ int ret;
+
+ dev_dbg(&d->intf->dev, "\n");
+
+ switch (dev->tuner) {
+ case TUNER_RTL2832_FC0012:
+ *pdata = rtl2832_fc0012_platform_data;
+ break;
+ case TUNER_RTL2832_FC0013:
+ *pdata = rtl2832_fc0013_platform_data;
+ break;
+ case TUNER_RTL2832_FC2580:
+ /* FIXME: do not abuse fc0012 settings */
+ *pdata = rtl2832_fc0012_platform_data;
+ break;
+ case TUNER_RTL2832_TUA9001:
+ *pdata = rtl2832_tua9001_platform_data;
+ break;
+ case TUNER_RTL2832_E4000:
+ *pdata = rtl2832_e4000_platform_data;
+ break;
+ case TUNER_RTL2832_R820T:
+ case TUNER_RTL2832_R828D:
+ *pdata = rtl2832_r820t_platform_data;
+ break;
+ default:
+ dev_err(&d->intf->dev, "unknown tuner %s\n", dev->tuner_name);
+ ret = -ENODEV;
+ goto err;
+ }
+
+ /* attach demodulator */
+ memset(&board_info, 0, sizeof(board_info));
+ strlcpy(board_info.type, "rtl2832", I2C_NAME_SIZE);
+ board_info.addr = 0x10;
+ board_info.platform_data = pdata;
+ request_module("%s", board_info.type);
+ client = i2c_new_device(&d->i2c_adap, &board_info);
+ if (client == NULL || client->dev.driver == NULL) {
+ ret = -ENODEV;
+ goto err;
+ }
+
+ if (!try_module_get(client->dev.driver->owner)) {
+ i2c_unregister_device(client);
+ ret = -ENODEV;
+ goto err;
+ }
+
+ adap->fe[0] = pdata->get_dvb_frontend(client);
+ dev->demod_i2c_adapter = pdata->get_i2c_adapter(client);
+
+ dev->i2c_client_demod = client;
+
+ /* set fe callback */
+ adap->fe[0]->callback = rtl2832u_frontend_callback;
+
+ if (dev->slave_demod) {
+ struct i2c_board_info info = {};
+
+ /*
+ * We continue on reduced mode, without DVB-T2/C, using master
+ * demod, when slave demod fails.
+ */
+ ret = 0;
+
+ /* attach slave demodulator */
+ if (dev->slave_demod == SLAVE_DEMOD_MN88472) {
+ struct mn88472_config mn88472_config = {};
+
+ mn88472_config.fe = &adap->fe[1];
+ mn88472_config.i2c_wr_max = 22,
+ strlcpy(info.type, "mn88472", I2C_NAME_SIZE);
+ mn88472_config.xtal = 20500000;
+ mn88472_config.ts_mode = SERIAL_TS_MODE;
+ mn88472_config.ts_clock = VARIABLE_TS_CLOCK;
+ info.addr = 0x18;
+ info.platform_data = &mn88472_config;
+ request_module(info.type);
+ client = i2c_new_device(&d->i2c_adap, &info);
+ if (client == NULL || client->dev.driver == NULL) {
+ dev->slave_demod = SLAVE_DEMOD_NONE;
+ goto err_slave_demod_failed;
+ }
+
+ if (!try_module_get(client->dev.driver->owner)) {
+ i2c_unregister_device(client);
+ dev->slave_demod = SLAVE_DEMOD_NONE;
+ goto err_slave_demod_failed;
+ }
+
+ dev->i2c_client_slave_demod = client;
+ } else {
+ struct mn88473_config mn88473_config = {};
+
+ mn88473_config.fe = &adap->fe[1];
+ mn88473_config.i2c_wr_max = 22,
+ strlcpy(info.type, "mn88473", I2C_NAME_SIZE);
+ info.addr = 0x18;
+ info.platform_data = &mn88473_config;
+ request_module(info.type);
+ client = i2c_new_device(&d->i2c_adap, &info);
+ if (client == NULL || client->dev.driver == NULL) {
+ dev->slave_demod = SLAVE_DEMOD_NONE;
+ goto err_slave_demod_failed;
+ }
+
+ if (!try_module_get(client->dev.driver->owner)) {
+ i2c_unregister_device(client);
+ dev->slave_demod = SLAVE_DEMOD_NONE;
+ goto err_slave_demod_failed;
+ }
+
+ dev->i2c_client_slave_demod = client;
+ }
+ }
+
+ return 0;
+err_slave_demod_failed:
+err:
+ dev_dbg(&d->intf->dev, "failed=%d\n", ret);
+ return ret;
+}
+
+static int rtl28xxu_frontend_attach(struct dvb_usb_adapter *adap)
+{
+ struct rtl28xxu_dev *dev = adap_to_priv(adap);
+
+ if (dev->chip_id == CHIP_ID_RTL2831U)
+ return rtl2831u_frontend_attach(adap);
+ else
+ return rtl2832u_frontend_attach(adap);
+}
+
+static int rtl28xxu_frontend_detach(struct dvb_usb_adapter *adap)
+{
+ struct dvb_usb_device *d = adap_to_d(adap);
+ struct rtl28xxu_dev *dev = d_to_priv(d);
+ struct i2c_client *client;
+
+ dev_dbg(&d->intf->dev, "\n");
+
+ /* remove I2C slave demod */
+ client = dev->i2c_client_slave_demod;
+ if (client) {
+ module_put(client->dev.driver->owner);
+ i2c_unregister_device(client);
+ }
+
+ /* remove I2C demod */
+ client = dev->i2c_client_demod;
+ if (client) {
+ module_put(client->dev.driver->owner);
+ i2c_unregister_device(client);
+ }
+
+ return 0;
+}
+
+static struct qt1010_config rtl28xxu_qt1010_config = {
+ .i2c_address = 0x62, /* 0xc4 */
+};
+
+static struct mt2060_config rtl28xxu_mt2060_config = {
+ .i2c_address = 0x60, /* 0xc0 */
+ .clock_out = 0,
+};
+
+static struct mxl5005s_config rtl28xxu_mxl5005s_config = {
+ .i2c_address = 0x63, /* 0xc6 */
+ .if_freq = IF_FREQ_4570000HZ,
+ .xtal_freq = CRYSTAL_FREQ_16000000HZ,
+ .agc_mode = MXL_SINGLE_AGC,
+ .tracking_filter = MXL_TF_C_H,
+ .rssi_enable = MXL_RSSI_ENABLE,
+ .cap_select = MXL_CAP_SEL_ENABLE,
+ .div_out = MXL_DIV_OUT_4,
+ .clock_out = MXL_CLOCK_OUT_DISABLE,
+ .output_load = MXL5005S_IF_OUTPUT_LOAD_200_OHM,
+ .top = MXL5005S_TOP_25P2,
+ .mod_mode = MXL_DIGITAL_MODE,
+ .if_mode = MXL_ZERO_IF,
+ .AgcMasterByte = 0x00,
+};
+
+static int rtl2831u_tuner_attach(struct dvb_usb_adapter *adap)
+{
+ int ret;
+ struct dvb_usb_device *d = adap_to_d(adap);
+ struct rtl28xxu_dev *dev = d_to_priv(d);
+ struct dvb_frontend *fe;
+
+ dev_dbg(&d->intf->dev, "\n");
+
+ switch (dev->tuner) {
+ case TUNER_RTL2830_QT1010:
+ fe = dvb_attach(qt1010_attach, adap->fe[0],
+ dev->demod_i2c_adapter,
+ &rtl28xxu_qt1010_config);
+ break;
+ case TUNER_RTL2830_MT2060:
+ fe = dvb_attach(mt2060_attach, adap->fe[0],
+ dev->demod_i2c_adapter,
+ &rtl28xxu_mt2060_config, 1220);
+ break;
+ case TUNER_RTL2830_MXL5005S:
+ fe = dvb_attach(mxl5005s_attach, adap->fe[0],
+ dev->demod_i2c_adapter,
+ &rtl28xxu_mxl5005s_config);
+ break;
+ default:
+ fe = NULL;
+ dev_err(&d->intf->dev, "unknown tuner %d\n", dev->tuner);
+ }
+
+ if (fe == NULL) {
+ ret = -ENODEV;
+ goto err;
+ }
+
+ return 0;
+err:
+ dev_dbg(&d->intf->dev, "failed=%d\n", ret);
+ return ret;
+}
+
+static const struct fc2580_config rtl2832u_fc2580_config = {
+ .i2c_addr = 0x56,
+ .clock = 16384000,
+};
+
+static struct tua9001_config rtl2832u_tua9001_config = {
+ .i2c_addr = 0x60,
+};
+
+static const struct fc0012_config rtl2832u_fc0012_config = {
+ .i2c_address = 0x63, /* 0xc6 >> 1 */
+ .xtal_freq = FC_XTAL_28_8_MHZ,
+};
+
+static const struct r820t_config rtl2832u_r820t_config = {
+ .i2c_addr = 0x1a,
+ .xtal = 28800000,
+ .max_i2c_msg_len = 2,
+ .rafael_chip = CHIP_R820T,
+};
+
+static const struct r820t_config rtl2832u_r828d_config = {
+ .i2c_addr = 0x3a,
+ .xtal = 16000000,
+ .max_i2c_msg_len = 2,
+ .rafael_chip = CHIP_R828D,
+};
+
+static int rtl2832u_tuner_attach(struct dvb_usb_adapter *adap)
+{
+ int ret;
+ struct dvb_usb_device *d = adap_to_d(adap);
+ struct rtl28xxu_dev *dev = d_to_priv(d);
+ struct dvb_frontend *fe = NULL;
+ struct i2c_board_info info;
+ struct i2c_client *client;
+ struct v4l2_subdev *subdev = NULL;
+ struct platform_device *pdev;
+ struct rtl2832_sdr_platform_data pdata;
+
+ dev_dbg(&d->intf->dev, "\n");
+
+ memset(&info, 0, sizeof(struct i2c_board_info));
+ memset(&pdata, 0, sizeof(pdata));
+
+ switch (dev->tuner) {
+ case TUNER_RTL2832_FC0012:
+ fe = dvb_attach(fc0012_attach, adap->fe[0],
+ dev->demod_i2c_adapter, &rtl2832u_fc0012_config);
+
+ /* since fc0012 includs reading the signal strength delegate
+ * that to the tuner driver */
+ adap->fe[0]->ops.read_signal_strength =
+ adap->fe[0]->ops.tuner_ops.get_rf_strength;
+ break;
+ case TUNER_RTL2832_FC0013:
+ fe = dvb_attach(fc0013_attach, adap->fe[0],
+ dev->demod_i2c_adapter, 0xc6>>1, 0, FC_XTAL_28_8_MHZ);
+
+ /* fc0013 also supports signal strength reading */
+ adap->fe[0]->ops.read_signal_strength =
+ adap->fe[0]->ops.tuner_ops.get_rf_strength;
+ break;
+ case TUNER_RTL2832_E4000: {
+ struct e4000_config e4000_config = {
+ .fe = adap->fe[0],
+ .clock = 28800000,
+ };
+
+ strlcpy(info.type, "e4000", I2C_NAME_SIZE);
+ info.addr = 0x64;
+ info.platform_data = &e4000_config;
+
+ request_module(info.type);
+ client = i2c_new_device(dev->demod_i2c_adapter, &info);
+ if (client == NULL || client->dev.driver == NULL)
+ break;
+
+ if (!try_module_get(client->dev.driver->owner)) {
+ i2c_unregister_device(client);
+ break;
+ }
+
+ dev->i2c_client_tuner = client;
+ subdev = i2c_get_clientdata(client);
+ }
+ break;
+ case TUNER_RTL2832_FC2580:
+ fe = dvb_attach(fc2580_attach, adap->fe[0],
+ dev->demod_i2c_adapter,
+ &rtl2832u_fc2580_config);
+ break;
+ case TUNER_RTL2832_TUA9001:
+ /* enable GPIO1 and GPIO4 as output */
+ ret = rtl28xxu_wr_reg_mask(d, SYS_GPIO_DIR, 0x00, 0x12);
+ if (ret)
+ goto err;
+
+ ret = rtl28xxu_wr_reg_mask(d, SYS_GPIO_OUT_EN, 0x12, 0x12);
+ if (ret)
+ goto err;
+
+ fe = dvb_attach(tua9001_attach, adap->fe[0],
+ dev->demod_i2c_adapter,
+ &rtl2832u_tua9001_config);
+ break;
+ case TUNER_RTL2832_R820T:
+ fe = dvb_attach(r820t_attach, adap->fe[0],
+ dev->demod_i2c_adapter,
+ &rtl2832u_r820t_config);
+
+ /* Use tuner to get the signal strength */
+ adap->fe[0]->ops.read_signal_strength =
+ adap->fe[0]->ops.tuner_ops.get_rf_strength;
+ break;
+ case TUNER_RTL2832_R828D:
+ fe = dvb_attach(r820t_attach, adap->fe[0],
+ dev->demod_i2c_adapter,
+ &rtl2832u_r828d_config);
+ adap->fe[0]->ops.read_signal_strength =
+ adap->fe[0]->ops.tuner_ops.get_rf_strength;
+
+ if (adap->fe[1]) {
+ fe = dvb_attach(r820t_attach, adap->fe[1],
+ dev->demod_i2c_adapter,
+ &rtl2832u_r828d_config);
+ adap->fe[1]->ops.read_signal_strength =
+ adap->fe[1]->ops.tuner_ops.get_rf_strength;
+ }
+ break;
+ default:
+ dev_err(&d->intf->dev, "unknown tuner %d\n", dev->tuner);
+ }
+ if (fe == NULL && dev->i2c_client_tuner == NULL) {
+ ret = -ENODEV;
+ goto err;
+ }
+
+ /* register SDR */
+ switch (dev->tuner) {
+ case TUNER_RTL2832_FC0012:
+ case TUNER_RTL2832_FC0013:
+ case TUNER_RTL2832_E4000:
+ case TUNER_RTL2832_R820T:
+ case TUNER_RTL2832_R828D:
+ pdata.clk = dev->rtl2832_platform_data.clk;
+ pdata.tuner = dev->tuner;
+ pdata.i2c_client = dev->i2c_client_demod;
+ pdata.bulk_read = dev->rtl2832_platform_data.bulk_read;
+ pdata.bulk_write = dev->rtl2832_platform_data.bulk_write;
+ pdata.update_bits = dev->rtl2832_platform_data.update_bits;
+ pdata.dvb_frontend = adap->fe[0];
+ pdata.dvb_usb_device = d;
+ pdata.v4l2_subdev = subdev;
+
+ request_module("%s", "rtl2832_sdr");
+ pdev = platform_device_register_data(&d->intf->dev,
+ "rtl2832_sdr",
+ PLATFORM_DEVID_AUTO,
+ &pdata, sizeof(pdata));
+ if (pdev == NULL || pdev->dev.driver == NULL)
+ break;
+ dev->platform_device_sdr = pdev;
+ break;
+ default:
+ dev_dbg(&d->intf->dev, "no SDR for tuner=%d\n", dev->tuner);
+ }
+
+ return 0;
+err:
+ dev_dbg(&d->intf->dev, "failed=%d\n", ret);
+ return ret;
+}
+
+static int rtl28xxu_tuner_attach(struct dvb_usb_adapter *adap)
+{
+ struct rtl28xxu_dev *dev = adap_to_priv(adap);
+
+ if (dev->chip_id == CHIP_ID_RTL2831U)
+ return rtl2831u_tuner_attach(adap);
+ else
+ return rtl2832u_tuner_attach(adap);
+}
+
+static int rtl28xxu_tuner_detach(struct dvb_usb_adapter *adap)
+{
+ struct dvb_usb_device *d = adap_to_d(adap);
+ struct rtl28xxu_dev *dev = d_to_priv(d);
+ struct i2c_client *client;
+ struct platform_device *pdev;
+
+ dev_dbg(&d->intf->dev, "\n");
+
+ /* remove platform SDR */
+ pdev = dev->platform_device_sdr;
+ if (pdev)
+ platform_device_unregister(pdev);
+
+ /* remove I2C tuner */
+ client = dev->i2c_client_tuner;
+ if (client) {
+ module_put(client->dev.driver->owner);
+ i2c_unregister_device(client);
+ }
+
+ return 0;
+}
+
+static int rtl28xxu_init(struct dvb_usb_device *d)
+{
+ int ret;
+ u8 val;
+
+ dev_dbg(&d->intf->dev, "\n");
+
+ /* init USB endpoints */
+ ret = rtl28xxu_rd_reg(d, USB_SYSCTL_0, &val);
+ if (ret)
+ goto err;
+
+ /* enable DMA and Full Packet Mode*/
+ val |= 0x09;
+ ret = rtl28xxu_wr_reg(d, USB_SYSCTL_0, val);
+ if (ret)
+ goto err;
+
+ /* set EPA maximum packet size to 0x0200 */
+ ret = rtl28xxu_wr_regs(d, USB_EPA_MAXPKT, "\x00\x02\x00\x00", 4);
+ if (ret)
+ goto err;
+
+ /* change EPA FIFO length */
+ ret = rtl28xxu_wr_regs(d, USB_EPA_FIFO_CFG, "\x14\x00\x00\x00", 4);
+ if (ret)
+ goto err;
+
+ return ret;
+err:
+ dev_dbg(&d->intf->dev, "failed=%d\n", ret);
+ return ret;
+}
+
+static int rtl2831u_power_ctrl(struct dvb_usb_device *d, int onoff)
+{
+ int ret;
+ u8 gpio, sys0, epa_ctl[2];
+
+ dev_dbg(&d->intf->dev, "onoff=%d\n", onoff);
+
+ /* demod adc */
+ ret = rtl28xxu_rd_reg(d, SYS_SYS0, &sys0);
+ if (ret)
+ goto err;
+
+ /* tuner power, read GPIOs */
+ ret = rtl28xxu_rd_reg(d, SYS_GPIO_OUT_VAL, &gpio);
+ if (ret)
+ goto err;
+
+ dev_dbg(&d->intf->dev, "RD SYS0=%02x GPIO_OUT_VAL=%02x\n", sys0, gpio);
+
+ if (onoff) {
+ gpio |= 0x01; /* GPIO0 = 1 */
+ gpio &= (~0x10); /* GPIO4 = 0 */
+ gpio |= 0x04; /* GPIO2 = 1, LED on */
+ sys0 = sys0 & 0x0f;
+ sys0 |= 0xe0;
+ epa_ctl[0] = 0x00; /* clear stall */
+ epa_ctl[1] = 0x00; /* clear reset */
+ } else {
+ gpio &= (~0x01); /* GPIO0 = 0 */
+ gpio |= 0x10; /* GPIO4 = 1 */
+ gpio &= (~0x04); /* GPIO2 = 1, LED off */
+ sys0 = sys0 & (~0xc0);
+ epa_ctl[0] = 0x10; /* set stall */
+ epa_ctl[1] = 0x02; /* set reset */
+ }
+
+ dev_dbg(&d->intf->dev, "WR SYS0=%02x GPIO_OUT_VAL=%02x\n", sys0, gpio);
+
+ /* demod adc */
+ ret = rtl28xxu_wr_reg(d, SYS_SYS0, sys0);
+ if (ret)
+ goto err;
+
+ /* tuner power, write GPIOs */
+ ret = rtl28xxu_wr_reg(d, SYS_GPIO_OUT_VAL, gpio);
+ if (ret)
+ goto err;
+
+ /* streaming EP: stall & reset */
+ ret = rtl28xxu_wr_regs(d, USB_EPA_CTL, epa_ctl, 2);
+ if (ret)
+ goto err;
+
+ if (onoff)
+ usb_clear_halt(d->udev, usb_rcvbulkpipe(d->udev, 0x81));
+
+ return ret;
+err:
+ dev_dbg(&d->intf->dev, "failed=%d\n", ret);
+ return ret;
+}
+
+static int rtl2832u_power_ctrl(struct dvb_usb_device *d, int onoff)
+{
+ int ret;
+
+ dev_dbg(&d->intf->dev, "onoff=%d\n", onoff);
+
+ if (onoff) {
+ /* GPIO3=1, GPIO4=0 */
+ ret = rtl28xxu_wr_reg_mask(d, SYS_GPIO_OUT_VAL, 0x08, 0x18);
+ if (ret)
+ goto err;
+
+ /* suspend? */
+ ret = rtl28xxu_wr_reg_mask(d, SYS_DEMOD_CTL1, 0x00, 0x10);
+ if (ret)
+ goto err;
+
+ /* enable PLL */
+ ret = rtl28xxu_wr_reg_mask(d, SYS_DEMOD_CTL, 0x80, 0x80);
+ if (ret)
+ goto err;
+
+ /* disable reset */
+ ret = rtl28xxu_wr_reg_mask(d, SYS_DEMOD_CTL, 0x20, 0x20);
+ if (ret)
+ goto err;
+
+ /* streaming EP: clear stall & reset */
+ ret = rtl28xxu_wr_regs(d, USB_EPA_CTL, "\x00\x00", 2);
+ if (ret)
+ goto err;
+
+ ret = usb_clear_halt(d->udev, usb_rcvbulkpipe(d->udev, 0x81));
+ if (ret)
+ goto err;
+ } else {
+ /* GPIO4=1 */
+ ret = rtl28xxu_wr_reg_mask(d, SYS_GPIO_OUT_VAL, 0x10, 0x10);
+ if (ret)
+ goto err;
+
+ /* disable PLL */
+ ret = rtl28xxu_wr_reg_mask(d, SYS_DEMOD_CTL, 0x00, 0x80);
+ if (ret)
+ goto err;
+
+ /* streaming EP: set stall & reset */
+ ret = rtl28xxu_wr_regs(d, USB_EPA_CTL, "\x10\x02", 2);
+ if (ret)
+ goto err;
+ }
+
+ return ret;
+err:
+ dev_dbg(&d->intf->dev, "failed=%d\n", ret);
+ return ret;
+}
+
+static int rtl28xxu_power_ctrl(struct dvb_usb_device *d, int onoff)
+{
+ struct rtl28xxu_dev *dev = d_to_priv(d);
+
+ if (dev->chip_id == CHIP_ID_RTL2831U)
+ return rtl2831u_power_ctrl(d, onoff);
+ else
+ return rtl2832u_power_ctrl(d, onoff);
+}
+
+static int rtl28xxu_frontend_ctrl(struct dvb_frontend *fe, int onoff)
+{
+ struct dvb_usb_device *d = fe_to_d(fe);
+ struct rtl28xxu_dev *dev = fe_to_priv(fe);
+ struct rtl2832_platform_data *pdata = &dev->rtl2832_platform_data;
+ int ret;
+ u8 val;
+
+ dev_dbg(&d->intf->dev, "fe=%d onoff=%d\n", fe->id, onoff);
+
+ if (dev->chip_id == CHIP_ID_RTL2831U)
+ return 0;
+
+ /* control internal demod ADC */
+ if (fe->id == 0 && onoff)
+ val = 0x48; /* enable ADC */
+ else
+ val = 0x00; /* disable ADC */
+
+ ret = rtl28xxu_wr_reg_mask(d, SYS_DEMOD_CTL, val, 0x48);
+ if (ret)
+ goto err;
+
+ /* bypass slave demod TS through master demod */
+ if (fe->id == 1 && onoff) {
+ ret = pdata->enable_slave_ts(dev->i2c_client_demod);
+ if (ret)
+ goto err;
+ }
+
+ return 0;
+err:
+ dev_dbg(&d->intf->dev, "failed=%d\n", ret);
+ return ret;
+}
+
+#if IS_ENABLED(CONFIG_RC_CORE)
+static int rtl2831u_rc_query(struct dvb_usb_device *d)
+{
+ int ret, i;
+ struct rtl28xxu_dev *dev = d->priv;
+ u8 buf[5];
+ u32 rc_code;
+ struct rtl28xxu_reg_val rc_nec_tab[] = {
+ { 0x3033, 0x80 },
+ { 0x3020, 0x43 },
+ { 0x3021, 0x16 },
+ { 0x3022, 0x16 },
+ { 0x3023, 0x5a },
+ { 0x3024, 0x2d },
+ { 0x3025, 0x16 },
+ { 0x3026, 0x01 },
+ { 0x3028, 0xb0 },
+ { 0x3029, 0x04 },
+ { 0x302c, 0x88 },
+ { 0x302e, 0x13 },
+ { 0x3030, 0xdf },
+ { 0x3031, 0x05 },
+ };
+
+ /* init remote controller */
+ if (!dev->rc_active) {
+ for (i = 0; i < ARRAY_SIZE(rc_nec_tab); i++) {
+ ret = rtl28xxu_wr_reg(d, rc_nec_tab[i].reg,
+ rc_nec_tab[i].val);
+ if (ret)
+ goto err;
+ }
+ dev->rc_active = true;
+ }
+
+ ret = rtl28xxu_rd_regs(d, SYS_IRRC_RP, buf, 5);
+ if (ret)
+ goto err;
+
+ if (buf[4] & 0x01) {
+ if (buf[2] == (u8) ~buf[3]) {
+ if (buf[0] == (u8) ~buf[1]) {
+ /* NEC standard (16 bit) */
+ rc_code = RC_SCANCODE_NEC(buf[0], buf[2]);
+ } else {
+ /* NEC extended (24 bit) */
+ rc_code = RC_SCANCODE_NECX(buf[0] << 8 | buf[1],
+ buf[2]);
+ }
+ } else {
+ /* NEC full (32 bit) */
+ rc_code = RC_SCANCODE_NEC32(buf[0] << 24 | buf[1] << 16 |
+ buf[2] << 8 | buf[3]);
+ }
+
+ rc_keydown(d->rc_dev, RC_TYPE_NEC, rc_code, 0);
+
+ ret = rtl28xxu_wr_reg(d, SYS_IRRC_SR, 1);
+ if (ret)
+ goto err;
+
+ /* repeated intentionally to avoid extra keypress */
+ ret = rtl28xxu_wr_reg(d, SYS_IRRC_SR, 1);
+ if (ret)
+ goto err;
+ }
+
+ return ret;
+err:
+ dev_dbg(&d->intf->dev, "failed=%d\n", ret);
+ return ret;
+}
+
+static int rtl2831u_get_rc_config(struct dvb_usb_device *d,
+ struct dvb_usb_rc *rc)
+{
+ rc->map_name = RC_MAP_EMPTY;
+ rc->allowed_protos = RC_BIT_NEC;
+ rc->query = rtl2831u_rc_query;
+ rc->interval = 400;
+
+ return 0;
+}
+
+static int rtl2832u_rc_query(struct dvb_usb_device *d)
+{
+ int ret, i, len;
+ struct rtl28xxu_dev *dev = d->priv;
+ struct ir_raw_event ev;
+ u8 buf[128];
+ static const struct rtl28xxu_reg_val_mask refresh_tab[] = {
+ {IR_RX_IF, 0x03, 0xff},
+ {IR_RX_BUF_CTRL, 0x80, 0xff},
+ {IR_RX_CTRL, 0x80, 0xff},
+ };
+
+ /* init remote controller */
+ if (!dev->rc_active) {
+ static const struct rtl28xxu_reg_val_mask init_tab[] = {
+ {SYS_DEMOD_CTL1, 0x00, 0x04},
+ {SYS_DEMOD_CTL1, 0x00, 0x08},
+ {USB_CTRL, 0x20, 0x20},
+ {SYS_GPIO_DIR, 0x00, 0x08},
+ {SYS_GPIO_OUT_EN, 0x08, 0x08},
+ {SYS_GPIO_OUT_VAL, 0x08, 0x08},
+ {IR_MAX_DURATION0, 0xd0, 0xff},
+ {IR_MAX_DURATION1, 0x07, 0xff},
+ {IR_IDLE_LEN0, 0xc0, 0xff},
+ {IR_IDLE_LEN1, 0x00, 0xff},
+ {IR_GLITCH_LEN, 0x03, 0xff},
+ {IR_RX_CLK, 0x09, 0xff},
+ {IR_RX_CFG, 0x1c, 0xff},
+ {IR_MAX_H_TOL_LEN, 0x1e, 0xff},
+ {IR_MAX_L_TOL_LEN, 0x1e, 0xff},
+ {IR_RX_CTRL, 0x80, 0xff},
+ };
+
+ for (i = 0; i < ARRAY_SIZE(init_tab); i++) {
+ ret = rtl28xxu_wr_reg_mask(d, init_tab[i].reg,
+ init_tab[i].val, init_tab[i].mask);
+ if (ret)
+ goto err;
+ }
+
+ dev->rc_active = true;
+ }
+
+ ret = rtl28xxu_rd_reg(d, IR_RX_IF, &buf[0]);
+ if (ret)
+ goto err;
+
+ if (buf[0] != 0x83)
+ goto exit;
+
+ ret = rtl28xxu_rd_reg(d, IR_RX_BC, &buf[0]);
+ if (ret)
+ goto err;
+
+ len = buf[0];
+
+ /* read raw code from hw */
+ ret = rtl28xxu_rd_regs(d, IR_RX_BUF, buf, len);
+ if (ret)
+ goto err;
+
+ /* let hw receive new code */
+ for (i = 0; i < ARRAY_SIZE(refresh_tab); i++) {
+ ret = rtl28xxu_wr_reg_mask(d, refresh_tab[i].reg,
+ refresh_tab[i].val, refresh_tab[i].mask);
+ if (ret)
+ goto err;
+ }
+
+ /* pass data to Kernel IR decoder */
+ init_ir_raw_event(&ev);
+
+ for (i = 0; i < len; i++) {
+ ev.pulse = buf[i] >> 7;
+ ev.duration = 50800 * (buf[i] & 0x7f);
+ ir_raw_event_store_with_filter(d->rc_dev, &ev);
+ }
+
+ /* 'flush' ir_raw_event_store_with_filter() */
+ ir_raw_event_set_idle(d->rc_dev, true);
+ ir_raw_event_handle(d->rc_dev);
+exit:
+ return ret;
+err:
+ dev_dbg(&d->intf->dev, "failed=%d\n", ret);
+ return ret;
+}
+
+static int rtl2832u_get_rc_config(struct dvb_usb_device *d,
+ struct dvb_usb_rc *rc)
+{
+ /* disable IR interrupts in order to avoid SDR sample loss */
+ if (rtl28xxu_disable_rc)
+ return rtl28xxu_wr_reg(d, IR_RX_IE, 0x00);
+
+ /* load empty to enable rc */
+ if (!rc->map_name)
+ rc->map_name = RC_MAP_EMPTY;
+ rc->allowed_protos = RC_BIT_ALL;
+ rc->driver_type = RC_DRIVER_IR_RAW;
+ rc->query = rtl2832u_rc_query;
+ rc->interval = 200;
+
+ return 0;
+}
+
+static int rtl28xxu_get_rc_config(struct dvb_usb_device *d,
+ struct dvb_usb_rc *rc)
+{
+ struct rtl28xxu_dev *dev = d_to_priv(d);
+
+ if (dev->chip_id == CHIP_ID_RTL2831U)
+ return rtl2831u_get_rc_config(d, rc);
+ else
+ return rtl2832u_get_rc_config(d, rc);
+}
+#else
+#define rtl28xxu_get_rc_config NULL
+#endif
+
+static int rtl28xxu_pid_filter_ctrl(struct dvb_usb_adapter *adap, int onoff)
+{
+ struct rtl28xxu_dev *dev = adap_to_priv(adap);
+
+ if (dev->chip_id == CHIP_ID_RTL2831U) {
+ struct rtl2830_platform_data *pdata = &dev->rtl2830_platform_data;
+
+ return pdata->pid_filter_ctrl(adap->fe[0], onoff);
+ } else {
+ struct rtl2832_platform_data *pdata = &dev->rtl2832_platform_data;
+
+ return pdata->pid_filter_ctrl(adap->fe[0], onoff);
+ }
+}
+
+static int rtl28xxu_pid_filter(struct dvb_usb_adapter *adap, int index,
+ u16 pid, int onoff)
+{
+ struct rtl28xxu_dev *dev = adap_to_priv(adap);
+
+ if (dev->chip_id == CHIP_ID_RTL2831U) {
+ struct rtl2830_platform_data *pdata = &dev->rtl2830_platform_data;
+
+ return pdata->pid_filter(adap->fe[0], index, pid, onoff);
+ } else {
+ struct rtl2832_platform_data *pdata = &dev->rtl2832_platform_data;
+
+ return pdata->pid_filter(adap->fe[0], index, pid, onoff);
+ }
+}
+
+static const struct dvb_usb_device_properties rtl28xxu_props = {
+ .driver_name = KBUILD_MODNAME,
+ .owner = THIS_MODULE,
+ .adapter_nr = adapter_nr,
+ .size_of_priv = sizeof(struct rtl28xxu_dev),
+
+ .identify_state = rtl28xxu_identify_state,
+ .power_ctrl = rtl28xxu_power_ctrl,
+ .frontend_ctrl = rtl28xxu_frontend_ctrl,
+ .i2c_algo = &rtl28xxu_i2c_algo,
+ .read_config = rtl28xxu_read_config,
+ .frontend_attach = rtl28xxu_frontend_attach,
+ .frontend_detach = rtl28xxu_frontend_detach,
+ .tuner_attach = rtl28xxu_tuner_attach,
+ .tuner_detach = rtl28xxu_tuner_detach,
+ .init = rtl28xxu_init,
+ .get_rc_config = rtl28xxu_get_rc_config,
+
+ .num_adapters = 1,
+ .adapter = {
+ {
+ .caps = DVB_USB_ADAP_HAS_PID_FILTER |
+ DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
+
+ .pid_filter_count = 32,
+ .pid_filter_ctrl = rtl28xxu_pid_filter_ctrl,
+ .pid_filter = rtl28xxu_pid_filter,
+
+ .stream = DVB_USB_STREAM_BULK(0x81, 6, 8 * 512),
+ },
+ },
+};
+
+static const struct usb_device_id rtl28xxu_id_table[] = {
+ /* RTL2831U devices: */
+ { DVB_USB_DEVICE(USB_VID_REALTEK, USB_PID_REALTEK_RTL2831U,
+ &rtl28xxu_props, "Realtek RTL2831U reference design", NULL) },
+ { DVB_USB_DEVICE(USB_VID_WIDEVIEW, USB_PID_FREECOM_DVBT,
+ &rtl28xxu_props, "Freecom USB2.0 DVB-T", NULL) },
+ { DVB_USB_DEVICE(USB_VID_WIDEVIEW, USB_PID_FREECOM_DVBT_2,
+ &rtl28xxu_props, "Freecom USB2.0 DVB-T", NULL) },
+
+ /* RTL2832U devices: */
+ { DVB_USB_DEVICE(USB_VID_REALTEK, 0x2832,
+ &rtl28xxu_props, "Realtek RTL2832U reference design", NULL) },
+ { DVB_USB_DEVICE(USB_VID_REALTEK, 0x2838,
+ &rtl28xxu_props, "Realtek RTL2832U reference design", NULL) },
+ { DVB_USB_DEVICE(USB_VID_TERRATEC, USB_PID_TERRATEC_CINERGY_T_STICK_BLACK_REV1,
+ &rtl28xxu_props, "TerraTec Cinergy T Stick Black", RC_MAP_TERRATEC_SLIM) },
+ { DVB_USB_DEVICE(USB_VID_GTEK, USB_PID_DELOCK_USB2_DVBT,
+ &rtl28xxu_props, "G-Tek Electronics Group Lifeview LV5TDLX DVB-T", NULL) },
+ { DVB_USB_DEVICE(USB_VID_TERRATEC, USB_PID_NOXON_DAB_STICK,
+ &rtl28xxu_props, "TerraTec NOXON DAB Stick", NULL) },
+ { DVB_USB_DEVICE(USB_VID_TERRATEC, USB_PID_NOXON_DAB_STICK_REV2,
+ &rtl28xxu_props, "TerraTec NOXON DAB Stick (rev 2)", NULL) },
+ { DVB_USB_DEVICE(USB_VID_TERRATEC, USB_PID_NOXON_DAB_STICK_REV3,
+ &rtl28xxu_props, "TerraTec NOXON DAB Stick (rev 3)", NULL) },
+ { DVB_USB_DEVICE(USB_VID_GTEK, USB_PID_TREKSTOR_TERRES_2_0,
+ &rtl28xxu_props, "Trekstor DVB-T Stick Terres 2.0", NULL) },
+ { DVB_USB_DEVICE(USB_VID_DEXATEK, 0x1101,
+ &rtl28xxu_props, "Dexatek DK DVB-T Dongle", NULL) },
+ { DVB_USB_DEVICE(USB_VID_LEADTEK, 0x6680,
+ &rtl28xxu_props, "DigitalNow Quad DVB-T Receiver", NULL) },
+ { DVB_USB_DEVICE(USB_VID_LEADTEK, USB_PID_WINFAST_DTV_DONGLE_MINID,
+ &rtl28xxu_props, "Leadtek Winfast DTV Dongle Mini D", NULL) },
+ { DVB_USB_DEVICE(USB_VID_LEADTEK, USB_PID_WINFAST_DTV2000DS_PLUS,
+ &rtl28xxu_props, "Leadtek WinFast DTV2000DS Plus", RC_MAP_LEADTEK_Y04G0051) },
+ { DVB_USB_DEVICE(USB_VID_TERRATEC, 0x00d3,
+ &rtl28xxu_props, "TerraTec Cinergy T Stick RC (Rev. 3)", NULL) },
+ { DVB_USB_DEVICE(USB_VID_DEXATEK, 0x1102,
+ &rtl28xxu_props, "Dexatek DK mini DVB-T Dongle", NULL) },
+ { DVB_USB_DEVICE(USB_VID_TERRATEC, 0x00d7,
+ &rtl28xxu_props, "TerraTec Cinergy T Stick+", NULL) },
+ { DVB_USB_DEVICE(USB_VID_KWORLD_2, 0xd3a8,
+ &rtl28xxu_props, "ASUS My Cinema-U3100Mini Plus V2", NULL) },
+ { DVB_USB_DEVICE(USB_VID_KWORLD_2, 0xd393,
+ &rtl28xxu_props, "GIGABYTE U7300", NULL) },
+ { DVB_USB_DEVICE(USB_VID_DEXATEK, 0x1104,
+ &rtl28xxu_props, "MSI DIGIVOX Micro HD", NULL) },
+ { DVB_USB_DEVICE(USB_VID_COMPRO, 0x0620,
+ &rtl28xxu_props, "Compro VideoMate U620F", NULL) },
+ { DVB_USB_DEVICE(USB_VID_KWORLD_2, 0xd394,
+ &rtl28xxu_props, "MaxMedia HU394-T", NULL) },
+ { DVB_USB_DEVICE(USB_VID_LEADTEK, 0x6a03,
+ &rtl28xxu_props, "Leadtek WinFast DTV Dongle mini", NULL) },
+ { DVB_USB_DEVICE(USB_VID_GTEK, USB_PID_CPYTO_REDI_PC50A,
+ &rtl28xxu_props, "Crypto ReDi PC 50 A", NULL) },
+ { DVB_USB_DEVICE(USB_VID_KYE, 0x707f,
+ &rtl28xxu_props, "Genius TVGo DVB-T03", NULL) },
+ { DVB_USB_DEVICE(USB_VID_KWORLD_2, 0xd395,
+ &rtl28xxu_props, "Peak DVB-T USB", NULL) },
+ { DVB_USB_DEVICE(USB_VID_KWORLD_2, USB_PID_SVEON_STV20_RTL2832U,
+ &rtl28xxu_props, "Sveon STV20", NULL) },
+ { DVB_USB_DEVICE(USB_VID_KWORLD_2, USB_PID_SVEON_STV21,
+ &rtl28xxu_props, "Sveon STV21", NULL) },
+ { DVB_USB_DEVICE(USB_VID_KWORLD_2, USB_PID_SVEON_STV27,
+ &rtl28xxu_props, "Sveon STV27", NULL) },
+ { DVB_USB_DEVICE(USB_VID_KWORLD_2, USB_PID_TURBOX_DTT_2000,
+ &rtl28xxu_props, "TURBO-X Pure TV Tuner DTT-2000", NULL) },
+
+ /* RTL2832P devices: */
+ { DVB_USB_DEVICE(USB_VID_HANFTEK, 0x0131,
+ &rtl28xxu_props, "Astrometa DVB-T2", NULL) },
+ { }
+};
+MODULE_DEVICE_TABLE(usb, rtl28xxu_id_table);
+
+static struct usb_driver rtl28xxu_usb_driver = {
+ .name = KBUILD_MODNAME,
+ .id_table = rtl28xxu_id_table,
+ .probe = dvb_usbv2_probe,
+ .disconnect = dvb_usbv2_disconnect,
+ .suspend = dvb_usbv2_suspend,
+ .resume = dvb_usbv2_resume,
+ .reset_resume = dvb_usbv2_reset_resume,
+ .no_dynamic_id = 1,
+ .soft_unbind = 1,
+};
+
+module_usb_driver(rtl28xxu_usb_driver);
+
+MODULE_DESCRIPTION("Realtek RTL28xxU DVB USB driver");
+MODULE_AUTHOR("Antti Palosaari <crope@iki.fi>");
+MODULE_AUTHOR("Thomas Mair <thomas.mair86@googlemail.com>");
+MODULE_LICENSE("GPL");
diff --git a/kernel/drivers/media/usb/dvb-usb-v2/rtl28xxu.h b/kernel/drivers/media/usb/dvb-usb-v2/rtl28xxu.h
new file mode 100644
index 000000000..1b5d7ffb6
--- /dev/null
+++ b/kernel/drivers/media/usb/dvb-usb-v2/rtl28xxu.h
@@ -0,0 +1,285 @@
+/*
+ * Realtek RTL28xxU DVB USB driver
+ *
+ * Copyright (C) 2009 Antti Palosaari <crope@iki.fi>
+ * Copyright (C) 2011 Antti Palosaari <crope@iki.fi>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+
+#ifndef RTL28XXU_H
+#define RTL28XXU_H
+
+#include <linux/platform_device.h>
+
+#include "dvb_usb.h"
+
+#include "rtl2830.h"
+#include "rtl2832.h"
+#include "rtl2832_sdr.h"
+#include "mn88472.h"
+#include "mn88473.h"
+
+#include "qt1010.h"
+#include "mt2060.h"
+#include "mxl5005s.h"
+#include "fc0012.h"
+#include "fc0013.h"
+#include "e4000.h"
+#include "fc2580.h"
+#include "tua9001.h"
+#include "r820t.h"
+
+/*
+ * USB commands
+ * (usb_control_msg() index parameter)
+ */
+
+#define DEMOD 0x0000
+#define USB 0x0100
+#define SYS 0x0200
+#define I2C 0x0300
+#define I2C_DA 0x0600
+
+#define CMD_WR_FLAG 0x0010
+#define CMD_DEMOD_RD 0x0000
+#define CMD_DEMOD_WR 0x0010
+#define CMD_USB_RD 0x0100
+#define CMD_USB_WR 0x0110
+#define CMD_SYS_RD 0x0200
+#define CMD_IR_RD 0x0201
+#define CMD_IR_WR 0x0211
+#define CMD_SYS_WR 0x0210
+#define CMD_I2C_RD 0x0300
+#define CMD_I2C_WR 0x0310
+#define CMD_I2C_DA_RD 0x0600
+#define CMD_I2C_DA_WR 0x0610
+
+
+struct rtl28xxu_dev {
+ u8 buf[28];
+ u8 chip_id;
+ u8 tuner;
+ char *tuner_name;
+ u8 page; /* integrated demod active register page */
+ struct i2c_adapter *demod_i2c_adapter;
+ bool rc_active;
+ struct i2c_client *i2c_client_demod;
+ struct i2c_client *i2c_client_tuner;
+ struct i2c_client *i2c_client_slave_demod;
+ struct platform_device *platform_device_sdr;
+ #define SLAVE_DEMOD_NONE 0
+ #define SLAVE_DEMOD_MN88472 1
+ #define SLAVE_DEMOD_MN88473 2
+ unsigned int slave_demod:2;
+ union {
+ struct rtl2830_platform_data rtl2830_platform_data;
+ struct rtl2832_platform_data rtl2832_platform_data;
+ };
+};
+
+enum rtl28xxu_chip_id {
+ CHIP_ID_NONE,
+ CHIP_ID_RTL2831U,
+ CHIP_ID_RTL2832U,
+};
+
+/* XXX: Hack. This must be keep sync with rtl2832 demod driver. */
+enum rtl28xxu_tuner {
+ TUNER_NONE,
+
+ TUNER_RTL2830_QT1010 = 0x10,
+ TUNER_RTL2830_MT2060,
+ TUNER_RTL2830_MXL5005S,
+
+ TUNER_RTL2832_MT2266 = 0x20,
+ TUNER_RTL2832_FC2580,
+ TUNER_RTL2832_MT2063,
+ TUNER_RTL2832_MAX3543,
+ TUNER_RTL2832_TUA9001,
+ TUNER_RTL2832_MXL5007T,
+ TUNER_RTL2832_FC0012,
+ TUNER_RTL2832_E4000,
+ TUNER_RTL2832_TDA18272,
+ TUNER_RTL2832_FC0013,
+ TUNER_RTL2832_R820T,
+ TUNER_RTL2832_R828D,
+};
+
+struct rtl28xxu_req {
+ u16 value;
+ u16 index;
+ u16 size;
+ u8 *data;
+};
+
+struct rtl28xxu_reg_val {
+ u16 reg;
+ u8 val;
+};
+
+struct rtl28xxu_reg_val_mask {
+ u16 reg;
+ u8 val;
+ u8 mask;
+};
+
+/*
+ * memory map
+ *
+ * 0x0000 DEMOD : demodulator
+ * 0x2000 USB : SIE, USB endpoint, debug, DMA
+ * 0x3000 SYS : system
+ * 0xfc00 RC : remote controller (not RTL2831U)
+ */
+
+/*
+ * USB registers
+ */
+/* SIE Control Registers */
+#define USB_SYSCTL 0x2000 /* USB system control */
+#define USB_SYSCTL_0 0x2000 /* USB system control */
+#define USB_SYSCTL_1 0x2001 /* USB system control */
+#define USB_SYSCTL_2 0x2002 /* USB system control */
+#define USB_SYSCTL_3 0x2003 /* USB system control */
+#define USB_IRQSTAT 0x2008 /* SIE interrupt status */
+#define USB_IRQEN 0x200C /* SIE interrupt enable */
+#define USB_CTRL 0x2010 /* USB control */
+#define USB_STAT 0x2014 /* USB status */
+#define USB_DEVADDR 0x2018 /* USB device address */
+#define USB_TEST 0x201C /* USB test mode */
+#define USB_FRAME_NUMBER 0x2020 /* frame number */
+#define USB_FIFO_ADDR 0x2028 /* address of SIE FIFO RAM */
+#define USB_FIFO_CMD 0x202A /* SIE FIFO RAM access command */
+#define USB_FIFO_DATA 0x2030 /* SIE FIFO RAM data */
+/* Endpoint Registers */
+#define EP0_SETUPA 0x20F8 /* EP 0 setup packet lower byte */
+#define EP0_SETUPB 0x20FC /* EP 0 setup packet higher byte */
+#define USB_EP0_CFG 0x2104 /* EP 0 configure */
+#define USB_EP0_CTL 0x2108 /* EP 0 control */
+#define USB_EP0_STAT 0x210C /* EP 0 status */
+#define USB_EP0_IRQSTAT 0x2110 /* EP 0 interrupt status */
+#define USB_EP0_IRQEN 0x2114 /* EP 0 interrupt enable */
+#define USB_EP0_MAXPKT 0x2118 /* EP 0 max packet size */
+#define USB_EP0_BC 0x2120 /* EP 0 FIFO byte counter */
+#define USB_EPA_CFG 0x2144 /* EP A configure */
+#define USB_EPA_CFG_0 0x2144 /* EP A configure */
+#define USB_EPA_CFG_1 0x2145 /* EP A configure */
+#define USB_EPA_CFG_2 0x2146 /* EP A configure */
+#define USB_EPA_CFG_3 0x2147 /* EP A configure */
+#define USB_EPA_CTL 0x2148 /* EP A control */
+#define USB_EPA_CTL_0 0x2148 /* EP A control */
+#define USB_EPA_CTL_1 0x2149 /* EP A control */
+#define USB_EPA_CTL_2 0x214A /* EP A control */
+#define USB_EPA_CTL_3 0x214B /* EP A control */
+#define USB_EPA_STAT 0x214C /* EP A status */
+#define USB_EPA_IRQSTAT 0x2150 /* EP A interrupt status */
+#define USB_EPA_IRQEN 0x2154 /* EP A interrupt enable */
+#define USB_EPA_MAXPKT 0x2158 /* EP A max packet size */
+#define USB_EPA_MAXPKT_0 0x2158 /* EP A max packet size */
+#define USB_EPA_MAXPKT_1 0x2159 /* EP A max packet size */
+#define USB_EPA_MAXPKT_2 0x215A /* EP A max packet size */
+#define USB_EPA_MAXPKT_3 0x215B /* EP A max packet size */
+#define USB_EPA_FIFO_CFG 0x2160 /* EP A FIFO configure */
+#define USB_EPA_FIFO_CFG_0 0x2160 /* EP A FIFO configure */
+#define USB_EPA_FIFO_CFG_1 0x2161 /* EP A FIFO configure */
+#define USB_EPA_FIFO_CFG_2 0x2162 /* EP A FIFO configure */
+#define USB_EPA_FIFO_CFG_3 0x2163 /* EP A FIFO configure */
+/* Debug Registers */
+#define USB_PHYTSTDIS 0x2F04 /* PHY test disable */
+#define USB_TOUT_VAL 0x2F08 /* USB time-out time */
+#define USB_VDRCTRL 0x2F10 /* UTMI vendor signal control */
+#define USB_VSTAIN 0x2F14 /* UTMI vendor signal status in */
+#define USB_VLOADM 0x2F18 /* UTMI load vendor signal status in */
+#define USB_VSTAOUT 0x2F1C /* UTMI vendor signal status out */
+#define USB_UTMI_TST 0x2F80 /* UTMI test */
+#define USB_UTMI_STATUS 0x2F84 /* UTMI status */
+#define USB_TSTCTL 0x2F88 /* test control */
+#define USB_TSTCTL2 0x2F8C /* test control 2 */
+#define USB_PID_FORCE 0x2F90 /* force PID */
+#define USB_PKTERR_CNT 0x2F94 /* packet error counter */
+#define USB_RXERR_CNT 0x2F98 /* RX error counter */
+#define USB_MEM_BIST 0x2F9C /* MEM BIST test */
+#define USB_SLBBIST 0x2FA0 /* self-loop-back BIST */
+#define USB_CNTTEST 0x2FA4 /* counter test */
+#define USB_PHYTST 0x2FC0 /* USB PHY test */
+#define USB_DBGIDX 0x2FF0 /* select individual block debug signal */
+#define USB_DBGMUX 0x2FF4 /* debug signal module mux */
+
+/*
+ * SYS registers
+ */
+/* demod control registers */
+#define SYS_SYS0 0x3000 /* include DEMOD_CTL, GPO, GPI, GPOE */
+#define SYS_DEMOD_CTL 0x3000 /* control register for DVB-T demodulator */
+/* GPIO registers */
+#define SYS_GPIO_OUT_VAL 0x3001 /* output value of GPIO */
+#define SYS_GPIO_IN_VAL 0x3002 /* input value of GPIO */
+#define SYS_GPIO_OUT_EN 0x3003 /* output enable of GPIO */
+#define SYS_SYS1 0x3004 /* include GPD, SYSINTE, SYSINTS, GP_CFG0 */
+#define SYS_GPIO_DIR 0x3004 /* direction control for GPIO */
+#define SYS_SYSINTE 0x3005 /* system interrupt enable */
+#define SYS_SYSINTS 0x3006 /* system interrupt status */
+#define SYS_GPIO_CFG0 0x3007 /* PAD configuration for GPIO0-GPIO3 */
+#define SYS_SYS2 0x3008 /* include GP_CFG1 and 3 reserved bytes */
+#define SYS_GPIO_CFG1 0x3008 /* PAD configuration for GPIO4 */
+#define SYS_DEMOD_CTL1 0x300B
+
+/* IrDA registers */
+#define SYS_IRRC_PSR 0x3020 /* IR protocol selection */
+#define SYS_IRRC_PER 0x3024 /* IR protocol extension */
+#define SYS_IRRC_SF 0x3028 /* IR sampling frequency */
+#define SYS_IRRC_DPIR 0x302C /* IR data package interval */
+#define SYS_IRRC_CR 0x3030 /* IR control */
+#define SYS_IRRC_RP 0x3034 /* IR read port */
+#define SYS_IRRC_SR 0x3038 /* IR status */
+/* I2C master registers */
+#define SYS_I2CCR 0x3040 /* I2C clock */
+#define SYS_I2CMCR 0x3044 /* I2C master control */
+#define SYS_I2CMSTR 0x3048 /* I2C master SCL timing */
+#define SYS_I2CMSR 0x304C /* I2C master status */
+#define SYS_I2CMFR 0x3050 /* I2C master FIFO */
+
+/*
+ * IR registers
+ */
+#define IR_RX_BUF 0xFC00
+#define IR_RX_IE 0xFD00
+#define IR_RX_IF 0xFD01
+#define IR_RX_CTRL 0xFD02
+#define IR_RX_CFG 0xFD03
+#define IR_MAX_DURATION0 0xFD04
+#define IR_MAX_DURATION1 0xFD05
+#define IR_IDLE_LEN0 0xFD06
+#define IR_IDLE_LEN1 0xFD07
+#define IR_GLITCH_LEN 0xFD08
+#define IR_RX_BUF_CTRL 0xFD09
+#define IR_RX_BUF_DATA 0xFD0A
+#define IR_RX_BC 0xFD0B
+#define IR_RX_CLK 0xFD0C
+#define IR_RX_C_COUNT_L 0xFD0D
+#define IR_RX_C_COUNT_H 0xFD0E
+#define IR_SUSPEND_CTRL 0xFD10
+#define IR_ERR_TOL_CTRL 0xFD11
+#define IR_UNIT_LEN 0xFD12
+#define IR_ERR_TOL_LEN 0xFD13
+#define IR_MAX_H_TOL_LEN 0xFD14
+#define IR_MAX_L_TOL_LEN 0xFD15
+#define IR_MASK_CTRL 0xFD16
+#define IR_MASK_DATA 0xFD17
+#define IR_RES_MASK_ADDR 0xFD18
+#define IR_RES_MASK_T_LEN 0xFD19
+
+#endif
diff --git a/kernel/drivers/media/usb/dvb-usb-v2/usb_urb.c b/kernel/drivers/media/usb/dvb-usb-v2/usb_urb.c
new file mode 100644
index 000000000..ca8f3c2b1
--- /dev/null
+++ b/kernel/drivers/media/usb/dvb-usb-v2/usb_urb.c
@@ -0,0 +1,362 @@
+/* usb-urb.c is part of the DVB USB library.
+ *
+ * Copyright (C) 2004-6 Patrick Boettcher (patrick.boettcher@desy.de)
+ * see dvb-usb-init.c for copyright information.
+ *
+ * This file keeps functions for initializing and handling the
+ * BULK and ISOC USB data transfers in a generic way.
+ * Can be used for DVB-only and also, that's the plan, for
+ * Hybrid USB devices (analog and DVB).
+ */
+#include "dvb_usb_common.h"
+
+/* URB stuff for streaming */
+
+int usb_urb_reconfig(struct usb_data_stream *stream,
+ struct usb_data_stream_properties *props);
+
+static void usb_urb_complete(struct urb *urb)
+{
+ struct usb_data_stream *stream = urb->context;
+ int ptype = usb_pipetype(urb->pipe);
+ int i;
+ u8 *b;
+
+ dev_dbg_ratelimited(&stream->udev->dev,
+ "%s: %s urb completed status=%d length=%d/%d pack_num=%d errors=%d\n",
+ __func__, ptype == PIPE_ISOCHRONOUS ? "isoc" : "bulk",
+ urb->status, urb->actual_length,
+ urb->transfer_buffer_length,
+ urb->number_of_packets, urb->error_count);
+
+ switch (urb->status) {
+ case 0: /* success */
+ case -ETIMEDOUT: /* NAK */
+ break;
+ case -ECONNRESET: /* kill */
+ case -ENOENT:
+ case -ESHUTDOWN:
+ return;
+ default: /* error */
+ dev_dbg_ratelimited(&stream->udev->dev,
+ "%s: urb completition failed=%d\n",
+ __func__, urb->status);
+ break;
+ }
+
+ b = (u8 *) urb->transfer_buffer;
+ switch (ptype) {
+ case PIPE_ISOCHRONOUS:
+ for (i = 0; i < urb->number_of_packets; i++) {
+ if (urb->iso_frame_desc[i].status != 0)
+ dev_dbg(&stream->udev->dev,
+ "%s: iso frame descriptor has an error=%d\n",
+ __func__,
+ urb->iso_frame_desc[i].status);
+ else if (urb->iso_frame_desc[i].actual_length > 0)
+ stream->complete(stream,
+ b + urb->iso_frame_desc[i].offset,
+ urb->iso_frame_desc[i].actual_length);
+
+ urb->iso_frame_desc[i].status = 0;
+ urb->iso_frame_desc[i].actual_length = 0;
+ }
+ break;
+ case PIPE_BULK:
+ if (urb->actual_length > 0)
+ stream->complete(stream, b, urb->actual_length);
+ break;
+ default:
+ dev_err(&stream->udev->dev,
+ "%s: unknown endpoint type in completition handler\n",
+ KBUILD_MODNAME);
+ return;
+ }
+ usb_submit_urb(urb, GFP_ATOMIC);
+}
+
+int usb_urb_killv2(struct usb_data_stream *stream)
+{
+ int i;
+ for (i = 0; i < stream->urbs_submitted; i++) {
+ dev_dbg(&stream->udev->dev, "%s: kill urb=%d\n", __func__, i);
+ /* stop the URB */
+ usb_kill_urb(stream->urb_list[i]);
+ }
+ stream->urbs_submitted = 0;
+ return 0;
+}
+
+int usb_urb_submitv2(struct usb_data_stream *stream,
+ struct usb_data_stream_properties *props)
+{
+ int i, ret;
+
+ if (props) {
+ ret = usb_urb_reconfig(stream, props);
+ if (ret < 0)
+ return ret;
+ }
+
+ for (i = 0; i < stream->urbs_initialized; i++) {
+ dev_dbg(&stream->udev->dev, "%s: submit urb=%d\n", __func__, i);
+ ret = usb_submit_urb(stream->urb_list[i], GFP_ATOMIC);
+ if (ret) {
+ dev_err(&stream->udev->dev,
+ "%s: could not submit urb no. %d - get them all back\n",
+ KBUILD_MODNAME, i);
+ usb_urb_killv2(stream);
+ return ret;
+ }
+ stream->urbs_submitted++;
+ }
+ return 0;
+}
+
+static int usb_urb_free_urbs(struct usb_data_stream *stream)
+{
+ int i;
+
+ usb_urb_killv2(stream);
+
+ for (i = stream->urbs_initialized - 1; i >= 0; i--) {
+ if (stream->urb_list[i]) {
+ dev_dbg(&stream->udev->dev, "%s: free urb=%d\n",
+ __func__, i);
+ /* free the URBs */
+ usb_free_urb(stream->urb_list[i]);
+ }
+ }
+ stream->urbs_initialized = 0;
+
+ return 0;
+}
+
+static int usb_urb_alloc_bulk_urbs(struct usb_data_stream *stream)
+{
+ int i, j;
+
+ /* allocate the URBs */
+ for (i = 0; i < stream->props.count; i++) {
+ dev_dbg(&stream->udev->dev, "%s: alloc urb=%d\n", __func__, i);
+ stream->urb_list[i] = usb_alloc_urb(0, GFP_ATOMIC);
+ if (!stream->urb_list[i]) {
+ dev_dbg(&stream->udev->dev, "%s: failed\n", __func__);
+ for (j = 0; j < i; j++)
+ usb_free_urb(stream->urb_list[j]);
+ return -ENOMEM;
+ }
+ usb_fill_bulk_urb(stream->urb_list[i],
+ stream->udev,
+ usb_rcvbulkpipe(stream->udev,
+ stream->props.endpoint),
+ stream->buf_list[i],
+ stream->props.u.bulk.buffersize,
+ usb_urb_complete, stream);
+
+ stream->urb_list[i]->transfer_flags = URB_NO_TRANSFER_DMA_MAP;
+ stream->urb_list[i]->transfer_dma = stream->dma_addr[i];
+ stream->urbs_initialized++;
+ }
+ return 0;
+}
+
+static int usb_urb_alloc_isoc_urbs(struct usb_data_stream *stream)
+{
+ int i, j;
+
+ /* allocate the URBs */
+ for (i = 0; i < stream->props.count; i++) {
+ struct urb *urb;
+ int frame_offset = 0;
+ dev_dbg(&stream->udev->dev, "%s: alloc urb=%d\n", __func__, i);
+ stream->urb_list[i] = usb_alloc_urb(
+ stream->props.u.isoc.framesperurb, GFP_ATOMIC);
+ if (!stream->urb_list[i]) {
+ dev_dbg(&stream->udev->dev, "%s: failed\n", __func__);
+ for (j = 0; j < i; j++)
+ usb_free_urb(stream->urb_list[j]);
+ return -ENOMEM;
+ }
+
+ urb = stream->urb_list[i];
+
+ urb->dev = stream->udev;
+ urb->context = stream;
+ urb->complete = usb_urb_complete;
+ urb->pipe = usb_rcvisocpipe(stream->udev,
+ stream->props.endpoint);
+ urb->transfer_flags = URB_ISO_ASAP | URB_NO_TRANSFER_DMA_MAP;
+ urb->interval = stream->props.u.isoc.interval;
+ urb->number_of_packets = stream->props.u.isoc.framesperurb;
+ urb->transfer_buffer_length = stream->props.u.isoc.framesize *
+ stream->props.u.isoc.framesperurb;
+ urb->transfer_buffer = stream->buf_list[i];
+ urb->transfer_dma = stream->dma_addr[i];
+
+ for (j = 0; j < stream->props.u.isoc.framesperurb; j++) {
+ urb->iso_frame_desc[j].offset = frame_offset;
+ urb->iso_frame_desc[j].length =
+ stream->props.u.isoc.framesize;
+ frame_offset += stream->props.u.isoc.framesize;
+ }
+
+ stream->urbs_initialized++;
+ }
+ return 0;
+}
+
+static int usb_free_stream_buffers(struct usb_data_stream *stream)
+{
+ if (stream->state & USB_STATE_URB_BUF) {
+ while (stream->buf_num) {
+ stream->buf_num--;
+ dev_dbg(&stream->udev->dev, "%s: free buf=%d\n",
+ __func__, stream->buf_num);
+ usb_free_coherent(stream->udev, stream->buf_size,
+ stream->buf_list[stream->buf_num],
+ stream->dma_addr[stream->buf_num]);
+ }
+ }
+
+ stream->state &= ~USB_STATE_URB_BUF;
+
+ return 0;
+}
+
+static int usb_alloc_stream_buffers(struct usb_data_stream *stream, int num,
+ unsigned long size)
+{
+ stream->buf_num = 0;
+ stream->buf_size = size;
+
+ dev_dbg(&stream->udev->dev,
+ "%s: all in all I will use %lu bytes for streaming\n",
+ __func__, num * size);
+
+ for (stream->buf_num = 0; stream->buf_num < num; stream->buf_num++) {
+ stream->buf_list[stream->buf_num] = usb_alloc_coherent(
+ stream->udev, size, GFP_ATOMIC,
+ &stream->dma_addr[stream->buf_num]);
+ if (!stream->buf_list[stream->buf_num]) {
+ dev_dbg(&stream->udev->dev, "%s: alloc buf=%d failed\n",
+ __func__, stream->buf_num);
+ usb_free_stream_buffers(stream);
+ return -ENOMEM;
+ }
+
+ dev_dbg(&stream->udev->dev, "%s: alloc buf=%d %p (dma %llu)\n",
+ __func__, stream->buf_num,
+ stream->buf_list[stream->buf_num],
+ (long long)stream->dma_addr[stream->buf_num]);
+ memset(stream->buf_list[stream->buf_num], 0, size);
+ stream->state |= USB_STATE_URB_BUF;
+ }
+
+ return 0;
+}
+
+int usb_urb_reconfig(struct usb_data_stream *stream,
+ struct usb_data_stream_properties *props)
+{
+ int buf_size;
+
+ if (!props)
+ return 0;
+
+ /* check allocated buffers are large enough for the request */
+ if (props->type == USB_BULK) {
+ buf_size = stream->props.u.bulk.buffersize;
+ } else if (props->type == USB_ISOC) {
+ buf_size = props->u.isoc.framesize * props->u.isoc.framesperurb;
+ } else {
+ dev_err(&stream->udev->dev, "%s: invalid endpoint type=%d\n",
+ KBUILD_MODNAME, props->type);
+ return -EINVAL;
+ }
+
+ if (stream->buf_num < props->count || stream->buf_size < buf_size) {
+ dev_err(&stream->udev->dev,
+ "%s: cannot reconfigure as allocated buffers are too small\n",
+ KBUILD_MODNAME);
+ return -EINVAL;
+ }
+
+ /* check if all fields are same */
+ if (stream->props.type == props->type &&
+ stream->props.count == props->count &&
+ stream->props.endpoint == props->endpoint) {
+ if (props->type == USB_BULK &&
+ props->u.bulk.buffersize ==
+ stream->props.u.bulk.buffersize)
+ return 0;
+ else if (props->type == USB_ISOC &&
+ props->u.isoc.framesperurb ==
+ stream->props.u.isoc.framesperurb &&
+ props->u.isoc.framesize ==
+ stream->props.u.isoc.framesize &&
+ props->u.isoc.interval ==
+ stream->props.u.isoc.interval)
+ return 0;
+ }
+
+ dev_dbg(&stream->udev->dev, "%s: re-alloc urbs\n", __func__);
+
+ usb_urb_free_urbs(stream);
+ memcpy(&stream->props, props, sizeof(*props));
+ if (props->type == USB_BULK)
+ return usb_urb_alloc_bulk_urbs(stream);
+ else if (props->type == USB_ISOC)
+ return usb_urb_alloc_isoc_urbs(stream);
+
+ return 0;
+}
+
+int usb_urb_initv2(struct usb_data_stream *stream,
+ const struct usb_data_stream_properties *props)
+{
+ int ret;
+
+ if (!stream || !props)
+ return -EINVAL;
+
+ memcpy(&stream->props, props, sizeof(*props));
+
+ if (!stream->complete) {
+ dev_err(&stream->udev->dev,
+ "%s: there is no data callback - this doesn't make sense\n",
+ KBUILD_MODNAME);
+ return -EINVAL;
+ }
+
+ switch (stream->props.type) {
+ case USB_BULK:
+ ret = usb_alloc_stream_buffers(stream, stream->props.count,
+ stream->props.u.bulk.buffersize);
+ if (ret < 0)
+ return ret;
+
+ return usb_urb_alloc_bulk_urbs(stream);
+ case USB_ISOC:
+ ret = usb_alloc_stream_buffers(stream, stream->props.count,
+ stream->props.u.isoc.framesize *
+ stream->props.u.isoc.framesperurb);
+ if (ret < 0)
+ return ret;
+
+ return usb_urb_alloc_isoc_urbs(stream);
+ default:
+ dev_err(&stream->udev->dev,
+ "%s: unknown urb-type for data transfer\n",
+ KBUILD_MODNAME);
+ return -EINVAL;
+ }
+}
+
+int usb_urb_exitv2(struct usb_data_stream *stream)
+{
+ usb_urb_free_urbs(stream);
+ usb_free_stream_buffers(stream);
+
+ return 0;
+}