diff options
Diffstat (limited to 'kernel/drivers/media/rc/streamzap.c')
| -rw-r--r-- | kernel/drivers/media/rc/streamzap.c | 512 |
1 files changed, 512 insertions, 0 deletions
diff --git a/kernel/drivers/media/rc/streamzap.c b/kernel/drivers/media/rc/streamzap.c new file mode 100644 index 000000000..bf4a44272 --- /dev/null +++ b/kernel/drivers/media/rc/streamzap.c @@ -0,0 +1,512 @@ +/* + * Streamzap Remote Control driver + * + * Copyright (c) 2005 Christoph Bartelmus <lirc@bartelmus.de> + * Copyright (c) 2010 Jarod Wilson <jarod@wilsonet.com> + * + * This driver was based on the work of Greg Wickham and Adrian + * Dewhurst. It was substantially rewritten to support correct signal + * gaps and now maintains a delay buffer, which is used to present + * consistent timing behaviour to user space applications. Without the + * delay buffer an ugly hack would be required in lircd, which can + * cause sluggish signal decoding in certain situations. + * + * Ported to in-kernel ir-core interface by Jarod Wilson + * + * This driver is based on the USB skeleton driver packaged with the + * kernel; copyright (C) 2001-2003 Greg Kroah-Hartman (greg@kroah.com) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include <linux/device.h> +#include <linux/module.h> +#include <linux/slab.h> +#include <linux/usb.h> +#include <linux/usb/input.h> +#include <media/rc-core.h> + +#define DRIVER_VERSION "1.61" +#define DRIVER_NAME "streamzap" +#define DRIVER_DESC "Streamzap Remote Control driver" + +#define USB_STREAMZAP_VENDOR_ID 0x0e9c +#define USB_STREAMZAP_PRODUCT_ID 0x0000 + +/* table of devices that work with this driver */ +static struct usb_device_id streamzap_table[] = { + /* Streamzap Remote Control */ + { USB_DEVICE(USB_STREAMZAP_VENDOR_ID, USB_STREAMZAP_PRODUCT_ID) }, + /* Terminating entry */ + { } +}; + +MODULE_DEVICE_TABLE(usb, streamzap_table); + +#define SZ_PULSE_MASK 0xf0 +#define SZ_SPACE_MASK 0x0f +#define SZ_TIMEOUT 0xff +#define SZ_RESOLUTION 256 + +/* number of samples buffered */ +#define SZ_BUF_LEN 128 + +enum StreamzapDecoderState { + PulseSpace, + FullPulse, + FullSpace, + IgnorePulse +}; + +/* structure to hold our device specific stuff */ +struct streamzap_ir { + /* ir-core */ + struct rc_dev *rdev; + + /* core device info */ + struct device *dev; + + /* usb */ + struct usb_device *usbdev; + struct usb_interface *interface; + struct usb_endpoint_descriptor *endpoint; + struct urb *urb_in; + + /* buffer & dma */ + unsigned char *buf_in; + dma_addr_t dma_in; + unsigned int buf_in_len; + + /* track what state we're in */ + enum StreamzapDecoderState decoder_state; + /* tracks whether we are currently receiving some signal */ + bool idle; + /* sum of signal lengths received since signal start */ + unsigned long sum; + /* start time of signal; necessary for gap tracking */ + struct timeval signal_last; + struct timeval signal_start; + bool timeout_enabled; + + char name[128]; + char phys[64]; +}; + + +/* local function prototypes */ +static int streamzap_probe(struct usb_interface *interface, + const struct usb_device_id *id); +static void streamzap_disconnect(struct usb_interface *interface); +static void streamzap_callback(struct urb *urb); +static int streamzap_suspend(struct usb_interface *intf, pm_message_t message); +static int streamzap_resume(struct usb_interface *intf); + +/* usb specific object needed to register this driver with the usb subsystem */ +static struct usb_driver streamzap_driver = { + .name = DRIVER_NAME, + .probe = streamzap_probe, + .disconnect = streamzap_disconnect, + .suspend = streamzap_suspend, + .resume = streamzap_resume, + .id_table = streamzap_table, +}; + +static void sz_push(struct streamzap_ir *sz, struct ir_raw_event rawir) +{ + dev_dbg(sz->dev, "Storing %s with duration %u us\n", + (rawir.pulse ? "pulse" : "space"), rawir.duration); + ir_raw_event_store_with_filter(sz->rdev, &rawir); +} + +static void sz_push_full_pulse(struct streamzap_ir *sz, + unsigned char value) +{ + DEFINE_IR_RAW_EVENT(rawir); + + if (sz->idle) { + long deltv; + + sz->signal_last = sz->signal_start; + do_gettimeofday(&sz->signal_start); + + deltv = sz->signal_start.tv_sec - sz->signal_last.tv_sec; + rawir.pulse = false; + if (deltv > 15) { + /* really long time */ + rawir.duration = IR_MAX_DURATION; + } else { + rawir.duration = (int)(deltv * 1000000 + + sz->signal_start.tv_usec - + sz->signal_last.tv_usec); + rawir.duration -= sz->sum; + rawir.duration = US_TO_NS(rawir.duration); + rawir.duration &= IR_MAX_DURATION; + } + sz_push(sz, rawir); + + sz->idle = false; + sz->sum = 0; + } + + rawir.pulse = true; + rawir.duration = ((int) value) * SZ_RESOLUTION; + rawir.duration += SZ_RESOLUTION / 2; + sz->sum += rawir.duration; + rawir.duration = US_TO_NS(rawir.duration); + rawir.duration &= IR_MAX_DURATION; + sz_push(sz, rawir); +} + +static void sz_push_half_pulse(struct streamzap_ir *sz, + unsigned char value) +{ + sz_push_full_pulse(sz, (value & SZ_PULSE_MASK) >> 4); +} + +static void sz_push_full_space(struct streamzap_ir *sz, + unsigned char value) +{ + DEFINE_IR_RAW_EVENT(rawir); + + rawir.pulse = false; + rawir.duration = ((int) value) * SZ_RESOLUTION; + rawir.duration += SZ_RESOLUTION / 2; + sz->sum += rawir.duration; + rawir.duration = US_TO_NS(rawir.duration); + sz_push(sz, rawir); +} + +static void sz_push_half_space(struct streamzap_ir *sz, + unsigned long value) +{ + sz_push_full_space(sz, value & SZ_SPACE_MASK); +} + +/** + * streamzap_callback - usb IRQ handler callback + * + * This procedure is invoked on reception of data from + * the usb remote. + */ +static void streamzap_callback(struct urb *urb) +{ + struct streamzap_ir *sz; + unsigned int i; + int len; + + if (!urb) + return; + + sz = urb->context; + len = urb->actual_length; + + switch (urb->status) { + case -ECONNRESET: + case -ENOENT: + case -ESHUTDOWN: + /* + * this urb is terminated, clean up. + * sz might already be invalid at this point + */ + dev_err(sz->dev, "urb terminated, status: %d\n", urb->status); + return; + default: + break; + } + + dev_dbg(sz->dev, "%s: received urb, len %d\n", __func__, len); + for (i = 0; i < len; i++) { + dev_dbg(sz->dev, "sz->buf_in[%d]: %x\n", + i, (unsigned char)sz->buf_in[i]); + switch (sz->decoder_state) { + case PulseSpace: + if ((sz->buf_in[i] & SZ_PULSE_MASK) == + SZ_PULSE_MASK) { + sz->decoder_state = FullPulse; + continue; + } else if ((sz->buf_in[i] & SZ_SPACE_MASK) + == SZ_SPACE_MASK) { + sz_push_half_pulse(sz, sz->buf_in[i]); + sz->decoder_state = FullSpace; + continue; + } else { + sz_push_half_pulse(sz, sz->buf_in[i]); + sz_push_half_space(sz, sz->buf_in[i]); + } + break; + case FullPulse: + sz_push_full_pulse(sz, sz->buf_in[i]); + sz->decoder_state = IgnorePulse; + break; + case FullSpace: + if (sz->buf_in[i] == SZ_TIMEOUT) { + DEFINE_IR_RAW_EVENT(rawir); + + rawir.pulse = false; + rawir.duration = sz->rdev->timeout; + sz->idle = true; + if (sz->timeout_enabled) + sz_push(sz, rawir); + ir_raw_event_handle(sz->rdev); + ir_raw_event_reset(sz->rdev); + } else { + sz_push_full_space(sz, sz->buf_in[i]); + } + sz->decoder_state = PulseSpace; + break; + case IgnorePulse: + if ((sz->buf_in[i] & SZ_SPACE_MASK) == + SZ_SPACE_MASK) { + sz->decoder_state = FullSpace; + continue; + } + sz_push_half_space(sz, sz->buf_in[i]); + sz->decoder_state = PulseSpace; + break; + } + } + + ir_raw_event_handle(sz->rdev); + usb_submit_urb(urb, GFP_ATOMIC); + + return; +} + +static struct rc_dev *streamzap_init_rc_dev(struct streamzap_ir *sz) +{ + struct rc_dev *rdev; + struct device *dev = sz->dev; + int ret; + + rdev = rc_allocate_device(); + if (!rdev) { + dev_err(dev, "remote dev allocation failed\n"); + goto out; + } + + snprintf(sz->name, sizeof(sz->name), "Streamzap PC Remote Infrared " + "Receiver (%04x:%04x)", + le16_to_cpu(sz->usbdev->descriptor.idVendor), + le16_to_cpu(sz->usbdev->descriptor.idProduct)); + usb_make_path(sz->usbdev, sz->phys, sizeof(sz->phys)); + strlcat(sz->phys, "/input0", sizeof(sz->phys)); + + rdev->input_name = sz->name; + rdev->input_phys = sz->phys; + usb_to_input_id(sz->usbdev, &rdev->input_id); + rdev->dev.parent = dev; + rdev->priv = sz; + rdev->driver_type = RC_DRIVER_IR_RAW; + rdev->allowed_protocols = RC_BIT_ALL; + rdev->driver_name = DRIVER_NAME; + rdev->map_name = RC_MAP_STREAMZAP; + + ret = rc_register_device(rdev); + if (ret < 0) { + dev_err(dev, "remote input device register failed\n"); + goto out; + } + + return rdev; + +out: + rc_free_device(rdev); + return NULL; +} + +/** + * streamzap_probe + * + * Called by usb-core to associated with a candidate device + * On any failure the return value is the ERROR + * On success return 0 + */ +static int streamzap_probe(struct usb_interface *intf, + const struct usb_device_id *id) +{ + struct usb_device *usbdev = interface_to_usbdev(intf); + struct usb_host_interface *iface_host; + struct streamzap_ir *sz = NULL; + char buf[63], name[128] = ""; + int retval = -ENOMEM; + int pipe, maxp; + + /* Allocate space for device driver specific data */ + sz = kzalloc(sizeof(struct streamzap_ir), GFP_KERNEL); + if (!sz) + return -ENOMEM; + + sz->usbdev = usbdev; + sz->interface = intf; + + /* Check to ensure endpoint information matches requirements */ + iface_host = intf->cur_altsetting; + + if (iface_host->desc.bNumEndpoints != 1) { + dev_err(&intf->dev, "%s: Unexpected desc.bNumEndpoints (%d)\n", + __func__, iface_host->desc.bNumEndpoints); + retval = -ENODEV; + goto free_sz; + } + + sz->endpoint = &(iface_host->endpoint[0].desc); + if (!usb_endpoint_dir_in(sz->endpoint)) { + dev_err(&intf->dev, "%s: endpoint doesn't match input device " + "02%02x\n", __func__, sz->endpoint->bEndpointAddress); + retval = -ENODEV; + goto free_sz; + } + + if (!usb_endpoint_xfer_int(sz->endpoint)) { + dev_err(&intf->dev, "%s: endpoint attributes don't match xfer " + "02%02x\n", __func__, sz->endpoint->bmAttributes); + retval = -ENODEV; + goto free_sz; + } + + pipe = usb_rcvintpipe(usbdev, sz->endpoint->bEndpointAddress); + maxp = usb_maxpacket(usbdev, pipe, usb_pipeout(pipe)); + + if (maxp == 0) { + dev_err(&intf->dev, "%s: endpoint Max Packet Size is 0!?!\n", + __func__); + retval = -ENODEV; + goto free_sz; + } + + /* Allocate the USB buffer and IRQ URB */ + sz->buf_in = usb_alloc_coherent(usbdev, maxp, GFP_ATOMIC, &sz->dma_in); + if (!sz->buf_in) + goto free_sz; + + sz->urb_in = usb_alloc_urb(0, GFP_KERNEL); + if (!sz->urb_in) + goto free_buf_in; + + sz->dev = &intf->dev; + sz->buf_in_len = maxp; + + if (usbdev->descriptor.iManufacturer + && usb_string(usbdev, usbdev->descriptor.iManufacturer, + buf, sizeof(buf)) > 0) + strlcpy(name, buf, sizeof(name)); + + if (usbdev->descriptor.iProduct + && usb_string(usbdev, usbdev->descriptor.iProduct, + buf, sizeof(buf)) > 0) + snprintf(name + strlen(name), sizeof(name) - strlen(name), + " %s", buf); + + sz->rdev = streamzap_init_rc_dev(sz); + if (!sz->rdev) + goto rc_dev_fail; + + sz->idle = true; + sz->decoder_state = PulseSpace; + /* FIXME: don't yet have a way to set this */ + sz->timeout_enabled = true; + sz->rdev->timeout = ((US_TO_NS(SZ_TIMEOUT * SZ_RESOLUTION) & + IR_MAX_DURATION) | 0x03000000); + #if 0 + /* not yet supported, depends on patches from maxim */ + /* see also: LIRC_GET_REC_RESOLUTION and LIRC_SET_REC_TIMEOUT */ + sz->min_timeout = US_TO_NS(SZ_TIMEOUT * SZ_RESOLUTION); + sz->max_timeout = US_TO_NS(SZ_TIMEOUT * SZ_RESOLUTION); + #endif + + do_gettimeofday(&sz->signal_start); + + /* Complete final initialisations */ + usb_fill_int_urb(sz->urb_in, usbdev, pipe, sz->buf_in, + maxp, (usb_complete_t)streamzap_callback, + sz, sz->endpoint->bInterval); + sz->urb_in->transfer_dma = sz->dma_in; + sz->urb_in->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; + + usb_set_intfdata(intf, sz); + + if (usb_submit_urb(sz->urb_in, GFP_ATOMIC)) + dev_err(sz->dev, "urb submit failed\n"); + + dev_info(sz->dev, "Registered %s on usb%d:%d\n", name, + usbdev->bus->busnum, usbdev->devnum); + + return 0; + +rc_dev_fail: + usb_free_urb(sz->urb_in); +free_buf_in: + usb_free_coherent(usbdev, maxp, sz->buf_in, sz->dma_in); +free_sz: + kfree(sz); + + return retval; +} + +/** + * streamzap_disconnect + * + * Called by the usb core when the device is removed from the system. + * + * This routine guarantees that the driver will not submit any more urbs + * by clearing dev->usbdev. It is also supposed to terminate any currently + * active urbs. Unfortunately, usb_bulk_msg(), used in streamzap_read(), + * does not provide any way to do this. + */ +static void streamzap_disconnect(struct usb_interface *interface) +{ + struct streamzap_ir *sz = usb_get_intfdata(interface); + struct usb_device *usbdev = interface_to_usbdev(interface); + + usb_set_intfdata(interface, NULL); + + if (!sz) + return; + + sz->usbdev = NULL; + rc_unregister_device(sz->rdev); + usb_kill_urb(sz->urb_in); + usb_free_urb(sz->urb_in); + usb_free_coherent(usbdev, sz->buf_in_len, sz->buf_in, sz->dma_in); + + kfree(sz); +} + +static int streamzap_suspend(struct usb_interface *intf, pm_message_t message) +{ + struct streamzap_ir *sz = usb_get_intfdata(intf); + + usb_kill_urb(sz->urb_in); + + return 0; +} + +static int streamzap_resume(struct usb_interface *intf) +{ + struct streamzap_ir *sz = usb_get_intfdata(intf); + + if (usb_submit_urb(sz->urb_in, GFP_ATOMIC)) { + dev_err(sz->dev, "Error sumbiting urb\n"); + return -EIO; + } + + return 0; +} + +module_usb_driver(streamzap_driver); + +MODULE_AUTHOR("Jarod Wilson <jarod@wilsonet.com>"); +MODULE_DESCRIPTION(DRIVER_DESC); +MODULE_LICENSE("GPL"); |