summaryrefslogtreecommitdiffstats
path: root/kernel/drivers/media/rc/ite-cir.h
diff options
context:
space:
mode:
Diffstat (limited to 'kernel/drivers/media/rc/ite-cir.h')
-rw-r--r--kernel/drivers/media/rc/ite-cir.h484
1 files changed, 484 insertions, 0 deletions
diff --git a/kernel/drivers/media/rc/ite-cir.h b/kernel/drivers/media/rc/ite-cir.h
new file mode 100644
index 000000000..aa899a0b9
--- /dev/null
+++ b/kernel/drivers/media/rc/ite-cir.h
@@ -0,0 +1,484 @@
+/*
+ * Driver for ITE Tech Inc. IT8712F/IT8512F CIR
+ *
+ * Copyright (C) 2010 Juan Jesús García de Soria <skandalfo@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
+ * USA.
+ */
+
+/* platform driver name to register */
+#define ITE_DRIVER_NAME "ite-cir"
+
+/* logging macros */
+#define ite_pr(level, text, ...) \
+ printk(level KBUILD_MODNAME ": " text, ## __VA_ARGS__)
+#define ite_dbg(text, ...) do { \
+ if (debug) \
+ printk(KERN_DEBUG \
+ KBUILD_MODNAME ": " text "\n" , ## __VA_ARGS__); \
+} while (0)
+
+#define ite_dbg_verbose(text, ...) do {\
+ if (debug > 1) \
+ printk(KERN_DEBUG \
+ KBUILD_MODNAME ": " text "\n" , ## __VA_ARGS__); \
+} while (0)
+
+/* FIFO sizes */
+#define ITE_TX_FIFO_LEN 32
+#define ITE_RX_FIFO_LEN 32
+
+/* interrupt types */
+#define ITE_IRQ_TX_FIFO 1
+#define ITE_IRQ_RX_FIFO 2
+#define ITE_IRQ_RX_FIFO_OVERRUN 4
+
+/* forward declaration */
+struct ite_dev;
+
+/* struct for storing the parameters of different recognized devices */
+struct ite_dev_params {
+ /* model of the device */
+ const char *model;
+
+ /* size of the I/O region */
+ int io_region_size;
+
+ /* IR pnp I/O resource number */
+ int io_rsrc_no;
+
+ /* true if the hardware supports transmission */
+ bool hw_tx_capable;
+
+ /* base sampling period, in ns */
+ u32 sample_period;
+
+ /* rx low carrier frequency, in Hz, 0 means no demodulation */
+ unsigned int rx_low_carrier_freq;
+
+ /* tx high carrier frequency, in Hz, 0 means no demodulation */
+ unsigned int rx_high_carrier_freq;
+
+ /* tx carrier frequency, in Hz */
+ unsigned int tx_carrier_freq;
+
+ /* duty cycle, 0-100 */
+ int tx_duty_cycle;
+
+ /* hw-specific operation function pointers; most of these must be
+ * called while holding the spin lock, except for the TX FIFO length
+ * one */
+ /* get pending interrupt causes */
+ int (*get_irq_causes) (struct ite_dev *dev);
+
+ /* enable rx */
+ void (*enable_rx) (struct ite_dev *dev);
+
+ /* make rx enter the idle state; keep listening for a pulse, but stop
+ * streaming space bytes */
+ void (*idle_rx) (struct ite_dev *dev);
+
+ /* disable rx completely */
+ void (*disable_rx) (struct ite_dev *dev);
+
+ /* read bytes from RX FIFO; return read count */
+ int (*get_rx_bytes) (struct ite_dev *dev, u8 *buf, int buf_size);
+
+ /* enable tx FIFO space available interrupt */
+ void (*enable_tx_interrupt) (struct ite_dev *dev);
+
+ /* disable tx FIFO space available interrupt */
+ void (*disable_tx_interrupt) (struct ite_dev *dev);
+
+ /* get number of full TX FIFO slots */
+ int (*get_tx_used_slots) (struct ite_dev *dev);
+
+ /* put a byte to the TX FIFO */
+ void (*put_tx_byte) (struct ite_dev *dev, u8 value);
+
+ /* disable hardware completely */
+ void (*disable) (struct ite_dev *dev);
+
+ /* initialize the hardware */
+ void (*init_hardware) (struct ite_dev *dev);
+
+ /* set the carrier parameters */
+ void (*set_carrier_params) (struct ite_dev *dev, bool high_freq,
+ bool use_demodulator, u8 carrier_freq_bits,
+ u8 allowance_bits, u8 pulse_width_bits);
+};
+
+/* ITE CIR device structure */
+struct ite_dev {
+ struct pnp_dev *pdev;
+ struct rc_dev *rdev;
+ struct ir_raw_event rawir;
+
+ /* sync data */
+ spinlock_t lock;
+ bool in_use, transmitting;
+
+ /* transmit support */
+ int tx_fifo_allowance;
+ wait_queue_head_t tx_queue, tx_ended;
+
+ /* hardware I/O settings */
+ unsigned long cir_addr;
+ int cir_irq;
+
+ /* overridable copy of model parameters */
+ struct ite_dev_params params;
+};
+
+/* common values for all kinds of hardware */
+
+/* baud rate divisor default */
+#define ITE_BAUDRATE_DIVISOR 1
+
+/* low-speed carrier frequency limits (Hz) */
+#define ITE_LCF_MIN_CARRIER_FREQ 27000
+#define ITE_LCF_MAX_CARRIER_FREQ 58000
+
+/* high-speed carrier frequency limits (Hz) */
+#define ITE_HCF_MIN_CARRIER_FREQ 400000
+#define ITE_HCF_MAX_CARRIER_FREQ 500000
+
+/* default carrier freq for when demodulator is off (Hz) */
+#define ITE_DEFAULT_CARRIER_FREQ 38000
+
+/* default idling timeout in ns (0.2 seconds) */
+#define ITE_IDLE_TIMEOUT 200000000UL
+
+/* limit timeout values */
+#define ITE_MIN_IDLE_TIMEOUT 100000000UL
+#define ITE_MAX_IDLE_TIMEOUT 1000000000UL
+
+/* convert bits to us */
+#define ITE_BITS_TO_NS(bits, sample_period) \
+((u32) ((bits) * ITE_BAUDRATE_DIVISOR * sample_period))
+
+/*
+ * n in RDCR produces a tolerance of +/- n * 6.25% around the center
+ * carrier frequency...
+ *
+ * From two limit frequencies, L (low) and H (high), we can get both the
+ * center frequency F = (L + H) / 2 and the variation from the center
+ * frequency A = (H - L) / (H + L). We can use this in order to honor the
+ * s_rx_carrier_range() call in ir-core. We'll suppose that any request
+ * setting L=0 means we must shut down the demodulator.
+ */
+#define ITE_RXDCR_PER_10000_STEP 625
+
+/* high speed carrier freq values */
+#define ITE_CFQ_400 0x03
+#define ITE_CFQ_450 0x08
+#define ITE_CFQ_480 0x0b
+#define ITE_CFQ_500 0x0d
+
+/* values for pulse widths */
+#define ITE_TXMPW_A 0x02
+#define ITE_TXMPW_B 0x03
+#define ITE_TXMPW_C 0x04
+#define ITE_TXMPW_D 0x05
+#define ITE_TXMPW_E 0x06
+
+/* values for demodulator carrier range allowance */
+#define ITE_RXDCR_DEFAULT 0x01 /* default carrier range */
+#define ITE_RXDCR_MAX 0x07 /* default carrier range */
+
+/* DR TX bits */
+#define ITE_TX_PULSE 0x00
+#define ITE_TX_SPACE 0x80
+#define ITE_TX_MAX_RLE 0x80
+#define ITE_TX_RLE_MASK 0x7f
+
+/*
+ * IT8712F
+ *
+ * hardware data obtained from:
+ *
+ * IT8712F
+ * Environment Control – Low Pin Count Input / Output
+ * (EC - LPC I/O)
+ * Preliminary Specification V0. 81
+ */
+
+/* register offsets */
+#define IT87_DR 0x00 /* data register */
+#define IT87_IER 0x01 /* interrupt enable register */
+#define IT87_RCR 0x02 /* receiver control register */
+#define IT87_TCR1 0x03 /* transmitter control register 1 */
+#define IT87_TCR2 0x04 /* transmitter control register 2 */
+#define IT87_TSR 0x05 /* transmitter status register */
+#define IT87_RSR 0x06 /* receiver status register */
+#define IT87_BDLR 0x05 /* baud rate divisor low byte register */
+#define IT87_BDHR 0x06 /* baud rate divisor high byte register */
+#define IT87_IIR 0x07 /* interrupt identification register */
+
+#define IT87_IOREG_LENGTH 0x08 /* length of register file */
+
+/* IER bits */
+#define IT87_TLDLIE 0x01 /* transmitter low data interrupt enable */
+#define IT87_RDAIE 0x02 /* receiver data available interrupt enable */
+#define IT87_RFOIE 0x04 /* receiver FIFO overrun interrupt enable */
+#define IT87_IEC 0x08 /* interrupt enable control */
+#define IT87_BR 0x10 /* baud rate register enable */
+#define IT87_RESET 0x20 /* reset */
+
+/* RCR bits */
+#define IT87_RXDCR 0x07 /* receiver demodulation carrier range mask */
+#define IT87_RXACT 0x08 /* receiver active */
+#define IT87_RXEND 0x10 /* receiver demodulation enable */
+#define IT87_RXEN 0x20 /* receiver enable */
+#define IT87_HCFS 0x40 /* high-speed carrier frequency select */
+#define IT87_RDWOS 0x80 /* receiver data without sync */
+
+/* TCR1 bits */
+#define IT87_TXMPM 0x03 /* transmitter modulation pulse mode mask */
+#define IT87_TXMPM_DEFAULT 0x00 /* modulation pulse mode default */
+#define IT87_TXENDF 0x04 /* transmitter deferral */
+#define IT87_TXRLE 0x08 /* transmitter run length enable */
+#define IT87_FIFOTL 0x30 /* FIFO level threshold mask */
+#define IT87_FIFOTL_DEFAULT 0x20 /* FIFO level threshold default
+ * 0x00 -> 1, 0x10 -> 7, 0x20 -> 17,
+ * 0x30 -> 25 */
+#define IT87_ILE 0x40 /* internal loopback enable */
+#define IT87_FIFOCLR 0x80 /* FIFO clear bit */
+
+/* TCR2 bits */
+#define IT87_TXMPW 0x07 /* transmitter modulation pulse width mask */
+#define IT87_TXMPW_DEFAULT 0x04 /* default modulation pulse width */
+#define IT87_CFQ 0xf8 /* carrier frequency mask */
+#define IT87_CFQ_SHIFT 3 /* carrier frequency bit shift */
+
+/* TSR bits */
+#define IT87_TXFBC 0x3f /* transmitter FIFO byte count mask */
+
+/* RSR bits */
+#define IT87_RXFBC 0x3f /* receiver FIFO byte count mask */
+#define IT87_RXFTO 0x80 /* receiver FIFO time-out */
+
+/* IIR bits */
+#define IT87_IP 0x01 /* interrupt pending */
+#define IT87_II 0x06 /* interrupt identification mask */
+#define IT87_II_NOINT 0x00 /* no interrupt */
+#define IT87_II_TXLDL 0x02 /* transmitter low data level */
+#define IT87_II_RXDS 0x04 /* receiver data stored */
+#define IT87_II_RXFO 0x06 /* receiver FIFO overrun */
+
+/*
+ * IT8512E/F
+ *
+ * Hardware data obtained from:
+ *
+ * IT8512E/F
+ * Embedded Controller
+ * Preliminary Specification V0.4.1
+ *
+ * Note that the CIR registers are not directly available to the host, because
+ * they only are accessible to the integrated microcontroller. Thus, in order
+ * use it, some kind of bridging is required. As the bridging may depend on
+ * the controller firmware in use, we are going to use the PNP ID in order to
+ * determine the strategy and ports available. See after these generic
+ * IT8512E/F register definitions for register definitions for those
+ * strategies.
+ */
+
+/* register offsets */
+#define IT85_C0DR 0x00 /* data register */
+#define IT85_C0MSTCR 0x01 /* master control register */
+#define IT85_C0IER 0x02 /* interrupt enable register */
+#define IT85_C0IIR 0x03 /* interrupt identification register */
+#define IT85_C0CFR 0x04 /* carrier frequency register */
+#define IT85_C0RCR 0x05 /* receiver control register */
+#define IT85_C0TCR 0x06 /* transmitter control register */
+#define IT85_C0SCK 0x07 /* slow clock control register */
+#define IT85_C0BDLR 0x08 /* baud rate divisor low byte register */
+#define IT85_C0BDHR 0x09 /* baud rate divisor high byte register */
+#define IT85_C0TFSR 0x0a /* transmitter FIFO status register */
+#define IT85_C0RFSR 0x0b /* receiver FIFO status register */
+#define IT85_C0WCL 0x0d /* wakeup code length register */
+#define IT85_C0WCR 0x0e /* wakeup code read/write register */
+#define IT85_C0WPS 0x0f /* wakeup power control/status register */
+
+#define IT85_IOREG_LENGTH 0x10 /* length of register file */
+
+/* C0MSTCR bits */
+#define IT85_RESET 0x01 /* reset */
+#define IT85_FIFOCLR 0x02 /* FIFO clear bit */
+#define IT85_FIFOTL 0x0c /* FIFO level threshold mask */
+#define IT85_FIFOTL_DEFAULT 0x08 /* FIFO level threshold default
+ * 0x00 -> 1, 0x04 -> 7, 0x08 -> 17,
+ * 0x0c -> 25 */
+#define IT85_ILE 0x10 /* internal loopback enable */
+#define IT85_ILSEL 0x20 /* internal loopback select */
+
+/* C0IER bits */
+#define IT85_TLDLIE 0x01 /* TX low data level interrupt enable */
+#define IT85_RDAIE 0x02 /* RX data available interrupt enable */
+#define IT85_RFOIE 0x04 /* RX FIFO overrun interrupt enable */
+#define IT85_IEC 0x80 /* interrupt enable function control */
+
+/* C0IIR bits */
+#define IT85_TLDLI 0x01 /* transmitter low data level interrupt */
+#define IT85_RDAI 0x02 /* receiver data available interrupt */
+#define IT85_RFOI 0x04 /* receiver FIFO overrun interrupt */
+#define IT85_NIP 0x80 /* no interrupt pending */
+
+/* C0CFR bits */
+#define IT85_CFQ 0x1f /* carrier frequency mask */
+#define IT85_HCFS 0x20 /* high speed carrier frequency select */
+
+/* C0RCR bits */
+#define IT85_RXDCR 0x07 /* receiver demodulation carrier range mask */
+#define IT85_RXACT 0x08 /* receiver active */
+#define IT85_RXEND 0x10 /* receiver demodulation enable */
+#define IT85_RDWOS 0x20 /* receiver data without sync */
+#define IT85_RXEN 0x80 /* receiver enable */
+
+/* C0TCR bits */
+#define IT85_TXMPW 0x07 /* transmitter modulation pulse width mask */
+#define IT85_TXMPW_DEFAULT 0x04 /* default modulation pulse width */
+#define IT85_TXMPM 0x18 /* transmitter modulation pulse mode mask */
+#define IT85_TXMPM_DEFAULT 0x00 /* modulation pulse mode default */
+#define IT85_TXENDF 0x20 /* transmitter deferral */
+#define IT85_TXRLE 0x40 /* transmitter run length enable */
+
+/* C0SCK bits */
+#define IT85_SCKS 0x01 /* slow clock select */
+#define IT85_TXDCKG 0x02 /* TXD clock gating */
+#define IT85_DLL1P8E 0x04 /* DLL 1.8432M enable */
+#define IT85_DLLTE 0x08 /* DLL test enable */
+#define IT85_BRCM 0x70 /* baud rate count mode */
+#define IT85_DLLOCK 0x80 /* DLL lock */
+
+/* C0TFSR bits */
+#define IT85_TXFBC 0x3f /* transmitter FIFO count mask */
+
+/* C0RFSR bits */
+#define IT85_RXFBC 0x3f /* receiver FIFO count mask */
+#define IT85_RXFTO 0x80 /* receiver FIFO time-out */
+
+/* C0WCL bits */
+#define IT85_WCL 0x3f /* wakeup code length mask */
+
+/* C0WPS bits */
+#define IT85_CIRPOSIE 0x01 /* power on/off status interrupt enable */
+#define IT85_CIRPOIS 0x02 /* power on/off interrupt status */
+#define IT85_CIRPOII 0x04 /* power on/off interrupt identification */
+#define IT85_RCRST 0x10 /* wakeup code reading counter reset bit */
+#define IT85_WCRST 0x20 /* wakeup code writing counter reset bit */
+
+/*
+ * ITE8708
+ *
+ * Hardware data obtained from hacked driver for IT8512 in this forum post:
+ *
+ * http://ubuntuforums.org/showthread.php?t=1028640
+ *
+ * Although there's no official documentation for that driver, analysis would
+ * suggest that it maps the 16 registers of IT8512 onto two 8-register banks,
+ * selectable by a single bank-select bit that's mapped onto both banks. The
+ * IT8512 registers are mapped in a different order, so that the first bank
+ * maps the ones that are used more often, and two registers that share a
+ * reserved high-order bit are placed at the same offset in both banks in
+ * order to reuse the reserved bit as the bank select bit.
+ */
+
+/* register offsets */
+
+/* mapped onto both banks */
+#define IT8708_BANKSEL 0x07 /* bank select register */
+#define IT8708_HRAE 0x80 /* high registers access enable */
+
+/* mapped onto the low bank */
+#define IT8708_C0DR 0x00 /* data register */
+#define IT8708_C0MSTCR 0x01 /* master control register */
+#define IT8708_C0IER 0x02 /* interrupt enable register */
+#define IT8708_C0IIR 0x03 /* interrupt identification register */
+#define IT8708_C0RFSR 0x04 /* receiver FIFO status register */
+#define IT8708_C0RCR 0x05 /* receiver control register */
+#define IT8708_C0TFSR 0x06 /* transmitter FIFO status register */
+#define IT8708_C0TCR 0x07 /* transmitter control register */
+
+/* mapped onto the high bank */
+#define IT8708_C0BDLR 0x01 /* baud rate divisor low byte register */
+#define IT8708_C0BDHR 0x02 /* baud rate divisor high byte register */
+#define IT8708_C0CFR 0x04 /* carrier frequency register */
+
+/* registers whose bank mapping we don't know, since they weren't being used
+ * in the hacked driver... most probably they belong to the high bank too,
+ * since they fit in the holes the other registers leave */
+#define IT8708_C0SCK 0x03 /* slow clock control register */
+#define IT8708_C0WCL 0x05 /* wakeup code length register */
+#define IT8708_C0WCR 0x06 /* wakeup code read/write register */
+#define IT8708_C0WPS 0x07 /* wakeup power control/status register */
+
+#define IT8708_IOREG_LENGTH 0x08 /* length of register file */
+
+/* two more registers that are defined in the hacked driver, but can't be
+ * found in the data sheets; no idea what they are or how they are accessed,
+ * since the hacked driver doesn't seem to use them */
+#define IT8708_CSCRR 0x00
+#define IT8708_CGPINTR 0x01
+
+/* CSCRR bits */
+#define IT8708_CSCRR_SCRB 0x3f
+#define IT8708_CSCRR_PM 0x80
+
+/* CGPINTR bits */
+#define IT8708_CGPINT 0x01
+
+/*
+ * ITE8709
+ *
+ * Hardware interfacing data obtained from the original lirc_ite8709 driver.
+ * Verbatim from its sources:
+ *
+ * The ITE8709 device seems to be the combination of IT8512 superIO chip and
+ * a specific firmware running on the IT8512's embedded micro-controller.
+ * In addition of the embedded micro-controller, the IT8512 chip contains a
+ * CIR module and several other modules. A few modules are directly accessible
+ * by the host CPU, but most of them are only accessible by the
+ * micro-controller. The CIR module is only accessible by the
+ * micro-controller.
+ *
+ * The battery-backed SRAM module is accessible by the host CPU and the
+ * micro-controller. So one of the MC's firmware role is to act as a bridge
+ * between the host CPU and the CIR module. The firmware implements a kind of
+ * communication protocol using the SRAM module as a shared memory. The IT8512
+ * specification is publicly available on ITE's web site, but the
+ * communication protocol is not, so it was reverse-engineered.
+ */
+
+/* register offsets */
+#define IT8709_RAM_IDX 0x00 /* index into the SRAM module bytes */
+#define IT8709_RAM_VAL 0x01 /* read/write data to the indexed byte */
+
+#define IT8709_IOREG_LENGTH 0x02 /* length of register file */
+
+/* register offsets inside the SRAM module */
+#define IT8709_MODE 0x1a /* request/ack byte */
+#define IT8709_REG_IDX 0x1b /* index of the CIR register to access */
+#define IT8709_REG_VAL 0x1c /* value read/to be written */
+#define IT8709_IIR 0x1e /* interrupt identification register */
+#define IT8709_RFSR 0x1f /* receiver FIFO status register */
+#define IT8709_FIFO 0x20 /* start of in RAM RX FIFO copy */
+
+/* MODE values */
+#define IT8709_IDLE 0x00
+#define IT8709_WRITE 0x01
+#define IT8709_READ 0x02