summaryrefslogtreecommitdiffstats
path: root/kernel/drivers/media/pci/tw68
diff options
context:
space:
mode:
Diffstat (limited to 'kernel/drivers/media/pci/tw68')
-rw-r--r--kernel/drivers/media/pci/tw68/Kconfig9
-rw-r--r--kernel/drivers/media/pci/tw68/Makefile3
-rw-r--r--kernel/drivers/media/pci/tw68/tw68-core.c443
-rw-r--r--kernel/drivers/media/pci/tw68/tw68-reg.h195
-rw-r--r--kernel/drivers/media/pci/tw68/tw68-risc.c230
-rw-r--r--kernel/drivers/media/pci/tw68/tw68-video.c1044
-rw-r--r--kernel/drivers/media/pci/tw68/tw68.h231
7 files changed, 2155 insertions, 0 deletions
diff --git a/kernel/drivers/media/pci/tw68/Kconfig b/kernel/drivers/media/pci/tw68/Kconfig
new file mode 100644
index 000000000..95d5d5202
--- /dev/null
+++ b/kernel/drivers/media/pci/tw68/Kconfig
@@ -0,0 +1,9 @@
+config VIDEO_TW68
+ tristate "Techwell tw68x Video For Linux"
+ depends on VIDEO_DEV && PCI && VIDEO_V4L2
+ select VIDEOBUF2_DMA_SG
+ ---help---
+ Support for Techwell tw68xx based frame grabber boards.
+
+ To compile this driver as a module, choose M here: the
+ module will be called tw68.
diff --git a/kernel/drivers/media/pci/tw68/Makefile b/kernel/drivers/media/pci/tw68/Makefile
new file mode 100644
index 000000000..3d02f28b1
--- /dev/null
+++ b/kernel/drivers/media/pci/tw68/Makefile
@@ -0,0 +1,3 @@
+tw68-objs := tw68-core.o tw68-video.o tw68-risc.o
+
+obj-$(CONFIG_VIDEO_TW68) += tw68.o
diff --git a/kernel/drivers/media/pci/tw68/tw68-core.c b/kernel/drivers/media/pci/tw68/tw68-core.c
new file mode 100644
index 000000000..c135165a8
--- /dev/null
+++ b/kernel/drivers/media/pci/tw68/tw68-core.c
@@ -0,0 +1,443 @@
+/*
+ * tw68-core.c
+ * Core functions for the Techwell 68xx driver
+ *
+ * Much of this code is derived from the cx88 and sa7134 drivers, which
+ * were in turn derived from the bt87x driver. The original work was by
+ * Gerd Knorr; more recently the code was enhanced by Mauro Carvalho Chehab,
+ * Hans Verkuil, Andy Walls and many others. Their work is gratefully
+ * acknowledged. Full credit goes to them - any problems within this code
+ * are mine.
+ *
+ * Copyright (C) 2009 William M. Brack
+ *
+ * Refactored and updated to the latest v4l core frameworks:
+ *
+ * Copyright (C) 2014 Hans Verkuil <hverkuil@xs4all.nl>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/init.h>
+#include <linux/list.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/kmod.h>
+#include <linux/sound.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/mutex.h>
+#include <linux/dma-mapping.h>
+#include <linux/pm.h>
+
+#include <media/v4l2-dev.h>
+#include "tw68.h"
+#include "tw68-reg.h"
+
+MODULE_DESCRIPTION("v4l2 driver module for tw6800 based video capture cards");
+MODULE_AUTHOR("William M. Brack");
+MODULE_AUTHOR("Hans Verkuil <hverkuil@xs4all.nl>");
+MODULE_LICENSE("GPL");
+
+static unsigned int latency = UNSET;
+module_param(latency, int, 0444);
+MODULE_PARM_DESC(latency, "pci latency timer");
+
+static unsigned int video_nr[] = {[0 ... (TW68_MAXBOARDS - 1)] = UNSET };
+module_param_array(video_nr, int, NULL, 0444);
+MODULE_PARM_DESC(video_nr, "video device number");
+
+static unsigned int card[] = {[0 ... (TW68_MAXBOARDS - 1)] = UNSET };
+module_param_array(card, int, NULL, 0444);
+MODULE_PARM_DESC(card, "card type");
+
+static atomic_t tw68_instance = ATOMIC_INIT(0);
+
+/* ------------------------------------------------------------------ */
+
+/*
+ * Please add any new PCI IDs to: http://pci-ids.ucw.cz. This keeps
+ * the PCI ID database up to date. Note that the entries must be
+ * added under vendor 0x1797 (Techwell Inc.) as subsystem IDs.
+ */
+static const struct pci_device_id tw68_pci_tbl[] = {
+ {PCI_DEVICE(PCI_VENDOR_ID_TECHWELL, PCI_DEVICE_ID_6800)},
+ {PCI_DEVICE(PCI_VENDOR_ID_TECHWELL, PCI_DEVICE_ID_6801)},
+ {PCI_DEVICE(PCI_VENDOR_ID_TECHWELL, PCI_DEVICE_ID_6804)},
+ {PCI_DEVICE(PCI_VENDOR_ID_TECHWELL, PCI_DEVICE_ID_6816_1)},
+ {PCI_DEVICE(PCI_VENDOR_ID_TECHWELL, PCI_DEVICE_ID_6816_2)},
+ {PCI_DEVICE(PCI_VENDOR_ID_TECHWELL, PCI_DEVICE_ID_6816_3)},
+ {PCI_DEVICE(PCI_VENDOR_ID_TECHWELL, PCI_DEVICE_ID_6816_4)},
+ {0,}
+};
+
+/* ------------------------------------------------------------------ */
+
+
+/*
+ * The device is given a "soft reset". According to the specifications,
+ * after this "all register content remain unchanged", so we also write
+ * to all specified registers manually as well (mostly to manufacturer's
+ * specified reset values)
+ */
+static int tw68_hw_init1(struct tw68_dev *dev)
+{
+ /* Assure all interrupts are disabled */
+ tw_writel(TW68_INTMASK, 0); /* 020 */
+ /* Clear any pending interrupts */
+ tw_writel(TW68_INTSTAT, 0xffffffff); /* 01C */
+ /* Stop risc processor, set default buffer level */
+ tw_writel(TW68_DMAC, 0x1600);
+
+ tw_writeb(TW68_ACNTL, 0x80); /* 218 soft reset */
+ msleep(100);
+
+ tw_writeb(TW68_INFORM, 0x40); /* 208 mux0, 27mhz xtal */
+ tw_writeb(TW68_OPFORM, 0x04); /* 20C analog line-lock */
+ tw_writeb(TW68_HSYNC, 0); /* 210 color-killer high sens */
+ tw_writeb(TW68_ACNTL, 0x42); /* 218 int vref #2, chroma adc off */
+
+ tw_writeb(TW68_CROP_HI, 0x02); /* 21C Hactive m.s. bits */
+ tw_writeb(TW68_VDELAY_LO, 0x12);/* 220 Mfg specified reset value */
+ tw_writeb(TW68_VACTIVE_LO, 0xf0);
+ tw_writeb(TW68_HDELAY_LO, 0x0f);
+ tw_writeb(TW68_HACTIVE_LO, 0xd0);
+
+ tw_writeb(TW68_CNTRL1, 0xcd); /* 230 Wide Chroma BPF B/W
+ * Secam reduction, Adap comb for
+ * NTSC, Op Mode 1 */
+
+ tw_writeb(TW68_VSCALE_LO, 0); /* 234 */
+ tw_writeb(TW68_SCALE_HI, 0x11); /* 238 */
+ tw_writeb(TW68_HSCALE_LO, 0); /* 23c */
+ tw_writeb(TW68_BRIGHT, 0); /* 240 */
+ tw_writeb(TW68_CONTRAST, 0x5c); /* 244 */
+ tw_writeb(TW68_SHARPNESS, 0x51);/* 248 */
+ tw_writeb(TW68_SAT_U, 0x80); /* 24C */
+ tw_writeb(TW68_SAT_V, 0x80); /* 250 */
+ tw_writeb(TW68_HUE, 0x00); /* 254 */
+
+ /* TODO - Check that none of these are set by control defaults */
+ tw_writeb(TW68_SHARP2, 0x53); /* 258 Mfg specified reset val */
+ tw_writeb(TW68_VSHARP, 0x80); /* 25C Sharpness Coring val 8 */
+ tw_writeb(TW68_CORING, 0x44); /* 260 CTI and Vert Peak coring */
+ tw_writeb(TW68_CNTRL2, 0x00); /* 268 No power saving enabled */
+ tw_writeb(TW68_SDT, 0x07); /* 270 Enable shadow reg, auto-det */
+ tw_writeb(TW68_SDTR, 0x7f); /* 274 All stds recog, don't start */
+ tw_writeb(TW68_CLMPG, 0x50); /* 280 Clamp end at 40 sys clocks */
+ tw_writeb(TW68_IAGC, 0x22); /* 284 Mfg specified reset val */
+ tw_writeb(TW68_AGCGAIN, 0xf0); /* 288 AGC gain when loop disabled */
+ tw_writeb(TW68_PEAKWT, 0xd8); /* 28C White peak threshold */
+ tw_writeb(TW68_CLMPL, 0x3c); /* 290 Y channel clamp level */
+/* tw_writeb(TW68_SYNCT, 0x38);*/ /* 294 Sync amplitude */
+ tw_writeb(TW68_SYNCT, 0x30); /* 294 Sync amplitude */
+ tw_writeb(TW68_MISSCNT, 0x44); /* 298 Horiz sync, VCR detect sens */
+ tw_writeb(TW68_PCLAMP, 0x28); /* 29C Clamp pos from PLL sync */
+ /* Bit DETV of VCNTL1 helps sync multi cams/chip board */
+ tw_writeb(TW68_VCNTL1, 0x04); /* 2A0 */
+ tw_writeb(TW68_VCNTL2, 0); /* 2A4 */
+ tw_writeb(TW68_CKILL, 0x68); /* 2A8 Mfg specified reset val */
+ tw_writeb(TW68_COMB, 0x44); /* 2AC Mfg specified reset val */
+ tw_writeb(TW68_LDLY, 0x30); /* 2B0 Max positive luma delay */
+ tw_writeb(TW68_MISC1, 0x14); /* 2B4 Mfg specified reset val */
+ tw_writeb(TW68_LOOP, 0xa5); /* 2B8 Mfg specified reset val */
+ tw_writeb(TW68_MISC2, 0xe0); /* 2BC Enable colour killer */
+ tw_writeb(TW68_MVSN, 0); /* 2C0 */
+ tw_writeb(TW68_CLMD, 0x05); /* 2CC slice level auto, clamp med. */
+ tw_writeb(TW68_IDCNTL, 0); /* 2D0 Writing zero to this register
+ * selects NTSC ID detection,
+ * but doesn't change the
+ * sensitivity (which has a reset
+ * value of 1E). Since we are
+ * not doing auto-detection, it
+ * has no real effect */
+ tw_writeb(TW68_CLCNTL1, 0); /* 2D4 */
+ tw_writel(TW68_VBIC, 0x03); /* 010 */
+ tw_writel(TW68_CAP_CTL, 0x03); /* 040 Enable both even & odd flds */
+ tw_writel(TW68_DMAC, 0x2000); /* patch set had 0x2080 */
+ tw_writel(TW68_TESTREG, 0); /* 02C */
+
+ /*
+ * Some common boards, especially inexpensive single-chip models,
+ * use the GPIO bits 0-3 to control an on-board video-output mux.
+ * For these boards, we need to set up the GPIO register into
+ * "normal" mode, set bits 0-3 as output, and then set those bits
+ * zero.
+ *
+ * Eventually, it would be nice if we could identify these boards
+ * uniquely, and only do this initialisation if the board has been
+ * identify. For the moment, however, it shouldn't hurt anything
+ * to do these steps.
+ */
+ tw_writel(TW68_GPIOC, 0); /* Set the GPIO to "normal", no ints */
+ tw_writel(TW68_GPOE, 0x0f); /* Set bits 0-3 to "output" */
+ tw_writel(TW68_GPDATA, 0); /* Set all bits to low state */
+
+ /* Initialize the device control structures */
+ mutex_init(&dev->lock);
+ spin_lock_init(&dev->slock);
+
+ /* Initialize any subsystems */
+ tw68_video_init1(dev);
+ return 0;
+}
+
+static irqreturn_t tw68_irq(int irq, void *dev_id)
+{
+ struct tw68_dev *dev = dev_id;
+ u32 status, orig;
+ int loop;
+
+ status = orig = tw_readl(TW68_INTSTAT) & dev->pci_irqmask;
+ /* Check if anything to do */
+ if (0 == status)
+ return IRQ_NONE; /* Nope - return */
+ for (loop = 0; loop < 10; loop++) {
+ if (status & dev->board_virqmask) /* video interrupt */
+ tw68_irq_video_done(dev, status);
+ status = tw_readl(TW68_INTSTAT) & dev->pci_irqmask;
+ if (0 == status)
+ return IRQ_HANDLED;
+ }
+ dev_dbg(&dev->pci->dev, "%s: **** INTERRUPT NOT HANDLED - clearing mask (orig 0x%08x, cur 0x%08x)",
+ dev->name, orig, tw_readl(TW68_INTSTAT));
+ dev_dbg(&dev->pci->dev, "%s: pci_irqmask 0x%08x; board_virqmask 0x%08x ****\n",
+ dev->name, dev->pci_irqmask, dev->board_virqmask);
+ tw_clearl(TW68_INTMASK, dev->pci_irqmask);
+ return IRQ_HANDLED;
+}
+
+static int tw68_initdev(struct pci_dev *pci_dev,
+ const struct pci_device_id *pci_id)
+{
+ struct tw68_dev *dev;
+ int vidnr = -1;
+ int err;
+
+ dev = devm_kzalloc(&pci_dev->dev, sizeof(*dev), GFP_KERNEL);
+ if (NULL == dev)
+ return -ENOMEM;
+
+ dev->instance = v4l2_device_set_name(&dev->v4l2_dev, "tw68",
+ &tw68_instance);
+
+ err = v4l2_device_register(&pci_dev->dev, &dev->v4l2_dev);
+ if (err)
+ return err;
+
+ /* pci init */
+ dev->pci = pci_dev;
+ if (pci_enable_device(pci_dev)) {
+ err = -EIO;
+ goto fail1;
+ }
+
+ dev->name = dev->v4l2_dev.name;
+
+ if (UNSET != latency) {
+ pr_info("%s: setting pci latency timer to %d\n",
+ dev->name, latency);
+ pci_write_config_byte(pci_dev, PCI_LATENCY_TIMER, latency);
+ }
+
+ /* print pci info */
+ pci_read_config_byte(pci_dev, PCI_CLASS_REVISION, &dev->pci_rev);
+ pci_read_config_byte(pci_dev, PCI_LATENCY_TIMER, &dev->pci_lat);
+ pr_info("%s: found at %s, rev: %d, irq: %d, latency: %d, mmio: 0x%llx\n",
+ dev->name, pci_name(pci_dev), dev->pci_rev, pci_dev->irq,
+ dev->pci_lat, (u64)pci_resource_start(pci_dev, 0));
+ pci_set_master(pci_dev);
+ if (!pci_dma_supported(pci_dev, DMA_BIT_MASK(32))) {
+ pr_info("%s: Oops: no 32bit PCI DMA ???\n", dev->name);
+ err = -EIO;
+ goto fail1;
+ }
+
+ switch (pci_id->device) {
+ case PCI_DEVICE_ID_6800: /* TW6800 */
+ dev->vdecoder = TW6800;
+ dev->board_virqmask = TW68_VID_INTS;
+ break;
+ case PCI_DEVICE_ID_6801: /* Video decoder for TW6802 */
+ dev->vdecoder = TW6801;
+ dev->board_virqmask = TW68_VID_INTS | TW68_VID_INTSX;
+ break;
+ case PCI_DEVICE_ID_6804: /* Video decoder for TW6804 */
+ dev->vdecoder = TW6804;
+ dev->board_virqmask = TW68_VID_INTS | TW68_VID_INTSX;
+ break;
+ default:
+ dev->vdecoder = TWXXXX; /* To be announced */
+ dev->board_virqmask = TW68_VID_INTS | TW68_VID_INTSX;
+ break;
+ }
+
+ /* get mmio */
+ if (!request_mem_region(pci_resource_start(pci_dev, 0),
+ pci_resource_len(pci_dev, 0),
+ dev->name)) {
+ err = -EBUSY;
+ pr_err("%s: can't get MMIO memory @ 0x%llx\n",
+ dev->name,
+ (unsigned long long)pci_resource_start(pci_dev, 0));
+ goto fail1;
+ }
+ dev->lmmio = ioremap(pci_resource_start(pci_dev, 0),
+ pci_resource_len(pci_dev, 0));
+ dev->bmmio = (__u8 __iomem *)dev->lmmio;
+ if (NULL == dev->lmmio) {
+ err = -EIO;
+ pr_err("%s: can't ioremap() MMIO memory\n",
+ dev->name);
+ goto fail2;
+ }
+ /* initialize hardware #1 */
+ /* Then do any initialisation wanted before interrupts are on */
+ tw68_hw_init1(dev);
+
+ dev->alloc_ctx = vb2_dma_sg_init_ctx(&pci_dev->dev);
+ if (IS_ERR(dev->alloc_ctx)) {
+ err = PTR_ERR(dev->alloc_ctx);
+ goto fail3;
+ }
+
+ /* get irq */
+ err = devm_request_irq(&pci_dev->dev, pci_dev->irq, tw68_irq,
+ IRQF_SHARED, dev->name, dev);
+ if (err < 0) {
+ pr_err("%s: can't get IRQ %d\n",
+ dev->name, pci_dev->irq);
+ goto fail4;
+ }
+
+ /*
+ * Now do remainder of initialisation, first for
+ * things unique for this card, then for general board
+ */
+ if (dev->instance < TW68_MAXBOARDS)
+ vidnr = video_nr[dev->instance];
+ /* initialise video function first */
+ err = tw68_video_init2(dev, vidnr);
+ if (err < 0) {
+ pr_err("%s: can't register video device\n",
+ dev->name);
+ goto fail5;
+ }
+ tw_setl(TW68_INTMASK, dev->pci_irqmask);
+
+ pr_info("%s: registered device %s\n",
+ dev->name, video_device_node_name(&dev->vdev));
+
+ return 0;
+
+fail5:
+ video_unregister_device(&dev->vdev);
+fail4:
+ vb2_dma_sg_cleanup_ctx(dev->alloc_ctx);
+fail3:
+ iounmap(dev->lmmio);
+fail2:
+ release_mem_region(pci_resource_start(pci_dev, 0),
+ pci_resource_len(pci_dev, 0));
+fail1:
+ v4l2_device_unregister(&dev->v4l2_dev);
+ return err;
+}
+
+static void tw68_finidev(struct pci_dev *pci_dev)
+{
+ struct v4l2_device *v4l2_dev = pci_get_drvdata(pci_dev);
+ struct tw68_dev *dev =
+ container_of(v4l2_dev, struct tw68_dev, v4l2_dev);
+
+ /* shutdown subsystems */
+ tw_clearl(TW68_DMAC, TW68_DMAP_EN | TW68_FIFO_EN);
+ tw_writel(TW68_INTMASK, 0);
+
+ /* unregister */
+ video_unregister_device(&dev->vdev);
+ v4l2_ctrl_handler_free(&dev->hdl);
+ vb2_dma_sg_cleanup_ctx(dev->alloc_ctx);
+
+ /* release resources */
+ iounmap(dev->lmmio);
+ release_mem_region(pci_resource_start(pci_dev, 0),
+ pci_resource_len(pci_dev, 0));
+
+ v4l2_device_unregister(&dev->v4l2_dev);
+}
+
+#ifdef CONFIG_PM
+
+static int tw68_suspend(struct pci_dev *pci_dev , pm_message_t state)
+{
+ struct v4l2_device *v4l2_dev = pci_get_drvdata(pci_dev);
+ struct tw68_dev *dev = container_of(v4l2_dev,
+ struct tw68_dev, v4l2_dev);
+
+ tw_clearl(TW68_DMAC, TW68_DMAP_EN | TW68_FIFO_EN);
+ dev->pci_irqmask &= ~TW68_VID_INTS;
+ tw_writel(TW68_INTMASK, 0);
+
+ synchronize_irq(pci_dev->irq);
+
+ pci_save_state(pci_dev);
+ pci_set_power_state(pci_dev, pci_choose_state(pci_dev, state));
+ vb2_discard_done(&dev->vidq);
+
+ return 0;
+}
+
+static int tw68_resume(struct pci_dev *pci_dev)
+{
+ struct v4l2_device *v4l2_dev = pci_get_drvdata(pci_dev);
+ struct tw68_dev *dev = container_of(v4l2_dev,
+ struct tw68_dev, v4l2_dev);
+ struct tw68_buf *buf;
+ unsigned long flags;
+
+ pci_set_power_state(pci_dev, PCI_D0);
+ pci_restore_state(pci_dev);
+
+ /* Do things that are done in tw68_initdev ,
+ except of initializing memory structures.*/
+
+ msleep(100);
+
+ tw68_set_tvnorm_hw(dev);
+
+ /*resume unfinished buffer(s)*/
+ spin_lock_irqsave(&dev->slock, flags);
+ buf = container_of(dev->active.next, struct tw68_buf, list);
+
+ tw68_video_start_dma(dev, buf);
+
+ spin_unlock_irqrestore(&dev->slock, flags);
+
+ return 0;
+}
+#endif
+
+/* ----------------------------------------------------------- */
+
+static struct pci_driver tw68_pci_driver = {
+ .name = "tw68",
+ .id_table = tw68_pci_tbl,
+ .probe = tw68_initdev,
+ .remove = tw68_finidev,
+#ifdef CONFIG_PM
+ .suspend = tw68_suspend,
+ .resume = tw68_resume
+#endif
+};
+
+module_pci_driver(tw68_pci_driver);
diff --git a/kernel/drivers/media/pci/tw68/tw68-reg.h b/kernel/drivers/media/pci/tw68/tw68-reg.h
new file mode 100644
index 000000000..f60b3a896
--- /dev/null
+++ b/kernel/drivers/media/pci/tw68/tw68-reg.h
@@ -0,0 +1,195 @@
+/*
+ * tw68-reg.h - TW68xx register offsets
+ *
+ * Much of this code is derived from the cx88 and sa7134 drivers, which
+ * were in turn derived from the bt87x driver. The original work was by
+ * Gerd Knorr; more recently the code was enhanced by Mauro Carvalho Chehab,
+ * Hans Verkuil, Andy Walls and many others. Their work is gratefully
+ * acknowledged. Full credit goes to them - any problems within this code
+ * are mine.
+ *
+ * Copyright (C) William M. Brack
+ *
+ * Refactored and updated to the latest v4l core frameworks:
+ *
+ * Copyright (C) 2014 Hans Verkuil <hverkuil@xs4all.nl>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+*/
+
+#ifndef _TW68_REG_H_
+#define _TW68_REG_H_
+
+/* ---------------------------------------------------------------------- */
+#define TW68_DMAC 0x000
+#define TW68_DMAP_SA 0x004
+#define TW68_DMAP_EXE 0x008
+#define TW68_DMAP_PP 0x00c
+#define TW68_VBIC 0x010
+#define TW68_SBUSC 0x014
+#define TW68_SBUSSD 0x018
+#define TW68_INTSTAT 0x01C
+#define TW68_INTMASK 0x020
+#define TW68_GPIOC 0x024
+#define TW68_GPOE 0x028
+#define TW68_TESTREG 0x02C
+#define TW68_SBUSRD 0x030
+#define TW68_SBUS_TRIG 0x034
+#define TW68_CAP_CTL 0x040
+#define TW68_SUBSYS 0x054
+#define TW68_I2C_RST 0x064
+#define TW68_VBIINST 0x06C
+/* define bits in FIFO and DMAP Control reg */
+#define TW68_DMAP_EN (1 << 0)
+#define TW68_FIFO_EN (1 << 1)
+/* define the Interrupt Status Register bits */
+#define TW68_SBDONE (1 << 0)
+#define TW68_DMAPI (1 << 1)
+#define TW68_GPINT (1 << 2)
+#define TW68_FFOF (1 << 3)
+#define TW68_FDMIS (1 << 4)
+#define TW68_DMAPERR (1 << 5)
+#define TW68_PABORT (1 << 6)
+#define TW68_SBDONE2 (1 << 12)
+#define TW68_SBERR2 (1 << 13)
+#define TW68_PPERR (1 << 14)
+#define TW68_FFERR (1 << 15)
+#define TW68_DET50 (1 << 16)
+#define TW68_FLOCK (1 << 17)
+#define TW68_CCVALID (1 << 18)
+#define TW68_VLOCK (1 << 19)
+#define TW68_FIELD (1 << 20)
+#define TW68_SLOCK (1 << 21)
+#define TW68_HLOCK (1 << 22)
+#define TW68_VDLOSS (1 << 23)
+#define TW68_SBERR (1 << 24)
+/* define the i2c control register bits */
+#define TW68_SBMODE (0)
+#define TW68_WREN (1)
+#define TW68_SSCLK (6)
+#define TW68_SSDAT (7)
+#define TW68_SBCLK (8)
+#define TW68_WDLEN (16)
+#define TW68_RDLEN (20)
+#define TW68_SBRW (24)
+#define TW68_SBDEV (25)
+
+#define TW68_SBMODE_B (1 << TW68_SBMODE)
+#define TW68_WREN_B (1 << TW68_WREN)
+#define TW68_SSCLK_B (1 << TW68_SSCLK)
+#define TW68_SSDAT_B (1 << TW68_SSDAT)
+#define TW68_SBRW_B (1 << TW68_SBRW)
+
+#define TW68_GPDATA 0x100
+#define TW68_STATUS1 0x204
+#define TW68_INFORM 0x208
+#define TW68_OPFORM 0x20C
+#define TW68_HSYNC 0x210
+#define TW68_ACNTL 0x218
+#define TW68_CROP_HI 0x21C
+#define TW68_VDELAY_LO 0x220
+#define TW68_VACTIVE_LO 0x224
+#define TW68_HDELAY_LO 0x228
+#define TW68_HACTIVE_LO 0x22C
+#define TW68_CNTRL1 0x230
+#define TW68_VSCALE_LO 0x234
+#define TW68_SCALE_HI 0x238
+#define TW68_HSCALE_LO 0x23C
+#define TW68_BRIGHT 0x240
+#define TW68_CONTRAST 0x244
+#define TW68_SHARPNESS 0x248
+#define TW68_SAT_U 0x24C
+#define TW68_SAT_V 0x250
+#define TW68_HUE 0x254
+#define TW68_SHARP2 0x258
+#define TW68_VSHARP 0x25C
+#define TW68_CORING 0x260
+#define TW68_VBICNTL 0x264
+#define TW68_CNTRL2 0x268
+#define TW68_CC_DATA 0x26C
+#define TW68_SDT 0x270
+#define TW68_SDTR 0x274
+#define TW68_RESERV2 0x278
+#define TW68_RESERV3 0x27C
+#define TW68_CLMPG 0x280
+#define TW68_IAGC 0x284
+#define TW68_AGCGAIN 0x288
+#define TW68_PEAKWT 0x28C
+#define TW68_CLMPL 0x290
+#define TW68_SYNCT 0x294
+#define TW68_MISSCNT 0x298
+#define TW68_PCLAMP 0x29C
+#define TW68_VCNTL1 0x2A0
+#define TW68_VCNTL2 0x2A4
+#define TW68_CKILL 0x2A8
+#define TW68_COMB 0x2AC
+#define TW68_LDLY 0x2B0
+#define TW68_MISC1 0x2B4
+#define TW68_LOOP 0x2B8
+#define TW68_MISC2 0x2BC
+#define TW68_MVSN 0x2C0
+#define TW68_STATUS2 0x2C4
+#define TW68_HFREF 0x2C8
+#define TW68_CLMD 0x2CC
+#define TW68_IDCNTL 0x2D0
+#define TW68_CLCNTL1 0x2D4
+
+/* Audio */
+#define TW68_ACKI1 0x300
+#define TW68_ACKI2 0x304
+#define TW68_ACKI3 0x308
+#define TW68_ACKN1 0x30C
+#define TW68_ACKN2 0x310
+#define TW68_ACKN3 0x314
+#define TW68_SDIV 0x318
+#define TW68_LRDIV 0x31C
+#define TW68_ACCNTL 0x320
+
+#define TW68_VSCTL 0x3B8
+#define TW68_CHROMAGVAL 0x3BC
+
+#define TW68_F2CROP_HI 0x3DC
+#define TW68_F2VDELAY_LO 0x3E0
+#define TW68_F2VACTIVE_LO 0x3E4
+#define TW68_F2HDELAY_LO 0x3E8
+#define TW68_F2HACTIVE_LO 0x3EC
+#define TW68_F2CNT 0x3F0
+#define TW68_F2VSCALE_LO 0x3F4
+#define TW68_F2SCALE_HI 0x3F8
+#define TW68_F2HSCALE_LO 0x3FC
+
+#define RISC_INT_BIT 0x08000000
+#define RISC_SYNCO 0xC0000000
+#define RISC_SYNCE 0xD0000000
+#define RISC_JUMP 0xB0000000
+#define RISC_LINESTART 0x90000000
+#define RISC_INLINE 0xA0000000
+
+#define VideoFormatNTSC 0
+#define VideoFormatNTSCJapan 0
+#define VideoFormatPALBDGHI 1
+#define VideoFormatSECAM 2
+#define VideoFormatNTSC443 3
+#define VideoFormatPALM 4
+#define VideoFormatPALN 5
+#define VideoFormatPALNC 5
+#define VideoFormatPAL60 6
+#define VideoFormatAuto 7
+
+#define ColorFormatRGB32 0x00
+#define ColorFormatRGB24 0x10
+#define ColorFormatRGB16 0x20
+#define ColorFormatRGB15 0x30
+#define ColorFormatYUY2 0x40
+#define ColorFormatBSWAP 0x04
+#define ColorFormatWSWAP 0x08
+#define ColorFormatGamma 0x80
+#endif
diff --git a/kernel/drivers/media/pci/tw68/tw68-risc.c b/kernel/drivers/media/pci/tw68/tw68-risc.c
new file mode 100644
index 000000000..7439db212
--- /dev/null
+++ b/kernel/drivers/media/pci/tw68/tw68-risc.c
@@ -0,0 +1,230 @@
+/*
+ * tw68_risc.c
+ * Part of the device driver for Techwell 68xx based cards
+ *
+ * Much of this code is derived from the cx88 and sa7134 drivers, which
+ * were in turn derived from the bt87x driver. The original work was by
+ * Gerd Knorr; more recently the code was enhanced by Mauro Carvalho Chehab,
+ * Hans Verkuil, Andy Walls and many others. Their work is gratefully
+ * acknowledged. Full credit goes to them - any problems within this code
+ * are mine.
+ *
+ * Copyright (C) 2009 William M. Brack
+ *
+ * Refactored and updated to the latest v4l core frameworks:
+ *
+ * Copyright (C) 2014 Hans Verkuil <hverkuil@xs4all.nl>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include "tw68.h"
+
+/**
+ * @rp pointer to current risc program position
+ * @sglist pointer to "scatter-gather list" of buffer pointers
+ * @offset offset to target memory buffer
+ * @sync_line 0 -> no sync, 1 -> odd sync, 2 -> even sync
+ * @bpl number of bytes per scan line
+ * @padding number of bytes of padding to add
+ * @lines number of lines in field
+ * @jump insert a jump at the start
+ */
+static __le32 *tw68_risc_field(__le32 *rp, struct scatterlist *sglist,
+ unsigned int offset, u32 sync_line,
+ unsigned int bpl, unsigned int padding,
+ unsigned int lines, bool jump)
+{
+ struct scatterlist *sg;
+ unsigned int line, todo, done;
+
+ if (jump) {
+ *(rp++) = cpu_to_le32(RISC_JUMP);
+ *(rp++) = 0;
+ }
+
+ /* sync instruction */
+ if (sync_line == 1)
+ *(rp++) = cpu_to_le32(RISC_SYNCO);
+ else
+ *(rp++) = cpu_to_le32(RISC_SYNCE);
+ *(rp++) = 0;
+
+ /* scan lines */
+ sg = sglist;
+ for (line = 0; line < lines; line++) {
+ /* calculate next starting position */
+ while (offset && offset >= sg_dma_len(sg)) {
+ offset -= sg_dma_len(sg);
+ sg = sg_next(sg);
+ }
+ if (bpl <= sg_dma_len(sg) - offset) {
+ /* fits into current chunk */
+ *(rp++) = cpu_to_le32(RISC_LINESTART |
+ /* (offset<<12) |*/ bpl);
+ *(rp++) = cpu_to_le32(sg_dma_address(sg) + offset);
+ offset += bpl;
+ } else {
+ /*
+ * scanline needs to be split. Put the start in
+ * whatever memory remains using RISC_LINESTART,
+ * then the remainder into following addresses
+ * given by the scatter-gather list.
+ */
+ todo = bpl; /* one full line to be done */
+ /* first fragment */
+ done = (sg_dma_len(sg) - offset);
+ *(rp++) = cpu_to_le32(RISC_LINESTART |
+ (7 << 24) |
+ done);
+ *(rp++) = cpu_to_le32(sg_dma_address(sg) + offset);
+ todo -= done;
+ sg = sg_next(sg);
+ /* succeeding fragments have no offset */
+ while (todo > sg_dma_len(sg)) {
+ *(rp++) = cpu_to_le32(RISC_INLINE |
+ (done << 12) |
+ sg_dma_len(sg));
+ *(rp++) = cpu_to_le32(sg_dma_address(sg));
+ todo -= sg_dma_len(sg);
+ sg = sg_next(sg);
+ done += sg_dma_len(sg);
+ }
+ if (todo) {
+ /* final chunk - offset 0, count 'todo' */
+ *(rp++) = cpu_to_le32(RISC_INLINE |
+ (done << 12) |
+ todo);
+ *(rp++) = cpu_to_le32(sg_dma_address(sg));
+ }
+ offset = todo;
+ }
+ offset += padding;
+ }
+
+ return rp;
+}
+
+/**
+ * tw68_risc_buffer
+ *
+ * This routine is called by tw68-video. It allocates
+ * memory for the dma controller "program" and then fills in that
+ * memory with the appropriate "instructions".
+ *
+ * @pci_dev structure with info about the pci
+ * slot which our device is in.
+ * @risc structure with info about the memory
+ * used for our controller program.
+ * @sglist scatter-gather list entry
+ * @top_offset offset within the risc program area for the
+ * first odd frame line
+ * @bottom_offset offset within the risc program area for the
+ * first even frame line
+ * @bpl number of data bytes per scan line
+ * @padding number of extra bytes to add at end of line
+ * @lines number of scan lines
+ */
+int tw68_risc_buffer(struct pci_dev *pci,
+ struct tw68_buf *buf,
+ struct scatterlist *sglist,
+ unsigned int top_offset,
+ unsigned int bottom_offset,
+ unsigned int bpl,
+ unsigned int padding,
+ unsigned int lines)
+{
+ u32 instructions, fields;
+ __le32 *rp;
+
+ fields = 0;
+ if (UNSET != top_offset)
+ fields++;
+ if (UNSET != bottom_offset)
+ fields++;
+ /*
+ * estimate risc mem: worst case is one write per page border +
+ * one write per scan line + syncs + 2 jumps (all 2 dwords).
+ * Padding can cause next bpl to start close to a page border.
+ * First DMA region may be smaller than PAGE_SIZE
+ */
+ instructions = fields * (1 + (((bpl + padding) * lines) /
+ PAGE_SIZE) + lines) + 4;
+ buf->size = instructions * 8;
+ buf->cpu = pci_alloc_consistent(pci, buf->size, &buf->dma);
+ if (buf->cpu == NULL)
+ return -ENOMEM;
+
+ /* write risc instructions */
+ rp = buf->cpu;
+ if (UNSET != top_offset) /* generates SYNCO */
+ rp = tw68_risc_field(rp, sglist, top_offset, 1,
+ bpl, padding, lines, true);
+ if (UNSET != bottom_offset) /* generates SYNCE */
+ rp = tw68_risc_field(rp, sglist, bottom_offset, 2,
+ bpl, padding, lines, top_offset == UNSET);
+
+ /* save pointer to jmp instruction address */
+ buf->jmp = rp;
+ buf->cpu[1] = cpu_to_le32(buf->dma + 8);
+ /* assure risc buffer hasn't overflowed */
+ BUG_ON((buf->jmp - buf->cpu + 2) * sizeof(buf->cpu[0]) > buf->size);
+ return 0;
+}
+
+#if 0
+/* ------------------------------------------------------------------ */
+/* debug helper code */
+
+static void tw68_risc_decode(u32 risc, u32 addr)
+{
+#define RISC_OP(reg) (((reg) >> 28) & 7)
+ static struct instr_details {
+ char *name;
+ u8 has_data_type;
+ u8 has_byte_info;
+ u8 has_addr;
+ } instr[8] = {
+ [RISC_OP(RISC_SYNCO)] = {"syncOdd", 0, 0, 0},
+ [RISC_OP(RISC_SYNCE)] = {"syncEven", 0, 0, 0},
+ [RISC_OP(RISC_JUMP)] = {"jump", 0, 0, 1},
+ [RISC_OP(RISC_LINESTART)] = {"lineStart", 1, 1, 1},
+ [RISC_OP(RISC_INLINE)] = {"inline", 1, 1, 1},
+ };
+ u32 p;
+
+ p = RISC_OP(risc);
+ if (!(risc & 0x80000000) || !instr[p].name) {
+ pr_debug("0x%08x [ INVALID ]\n", risc);
+ return;
+ }
+ pr_debug("0x%08x %-9s IRQ=%d",
+ risc, instr[p].name, (risc >> 27) & 1);
+ if (instr[p].has_data_type)
+ pr_debug(" Type=%d", (risc >> 24) & 7);
+ if (instr[p].has_byte_info)
+ pr_debug(" Start=0x%03x Count=%03u",
+ (risc >> 12) & 0xfff, risc & 0xfff);
+ if (instr[p].has_addr)
+ pr_debug(" StartAddr=0x%08x", addr);
+ pr_debug("\n");
+}
+
+void tw68_risc_program_dump(struct tw68_core *core, struct tw68_buf *buf)
+{
+ const __le32 *addr;
+
+ pr_debug("%s: risc_program_dump: risc=%p, buf->cpu=0x%p, buf->jmp=0x%p\n",
+ core->name, buf, buf->cpu, buf->jmp);
+ for (addr = buf->cpu; addr <= buf->jmp; addr += 2)
+ tw68_risc_decode(*addr, *(addr+1));
+}
+#endif
diff --git a/kernel/drivers/media/pci/tw68/tw68-video.c b/kernel/drivers/media/pci/tw68/tw68-video.c
new file mode 100644
index 000000000..8355e55b4
--- /dev/null
+++ b/kernel/drivers/media/pci/tw68/tw68-video.c
@@ -0,0 +1,1044 @@
+/*
+ * tw68 functions to handle video data
+ *
+ * Much of this code is derived from the cx88 and sa7134 drivers, which
+ * were in turn derived from the bt87x driver. The original work was by
+ * Gerd Knorr; more recently the code was enhanced by Mauro Carvalho Chehab,
+ * Hans Verkuil, Andy Walls and many others. Their work is gratefully
+ * acknowledged. Full credit goes to them - any problems within this code
+ * are mine.
+ *
+ * Copyright (C) 2009 William M. Brack
+ *
+ * Refactored and updated to the latest v4l core frameworks:
+ *
+ * Copyright (C) 2014 Hans Verkuil <hverkuil@xs4all.nl>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/module.h>
+#include <media/v4l2-common.h>
+#include <media/v4l2-event.h>
+#include <media/videobuf2-dma-sg.h>
+
+#include "tw68.h"
+#include "tw68-reg.h"
+
+/* ------------------------------------------------------------------ */
+/* data structs for video */
+/*
+ * FIXME -
+ * Note that the saa7134 has formats, e.g. YUV420, which are classified
+ * as "planar". These affect overlay mode, and are flagged with a field
+ * ".planar" in the format. Do we need to implement this in this driver?
+ */
+static const struct tw68_format formats[] = {
+ {
+ .name = "15 bpp RGB, le",
+ .fourcc = V4L2_PIX_FMT_RGB555,
+ .depth = 16,
+ .twformat = ColorFormatRGB15,
+ }, {
+ .name = "15 bpp RGB, be",
+ .fourcc = V4L2_PIX_FMT_RGB555X,
+ .depth = 16,
+ .twformat = ColorFormatRGB15 | ColorFormatBSWAP,
+ }, {
+ .name = "16 bpp RGB, le",
+ .fourcc = V4L2_PIX_FMT_RGB565,
+ .depth = 16,
+ .twformat = ColorFormatRGB16,
+ }, {
+ .name = "16 bpp RGB, be",
+ .fourcc = V4L2_PIX_FMT_RGB565X,
+ .depth = 16,
+ .twformat = ColorFormatRGB16 | ColorFormatBSWAP,
+ }, {
+ .name = "24 bpp RGB, le",
+ .fourcc = V4L2_PIX_FMT_BGR24,
+ .depth = 24,
+ .twformat = ColorFormatRGB24,
+ }, {
+ .name = "24 bpp RGB, be",
+ .fourcc = V4L2_PIX_FMT_RGB24,
+ .depth = 24,
+ .twformat = ColorFormatRGB24 | ColorFormatBSWAP,
+ }, {
+ .name = "32 bpp RGB, le",
+ .fourcc = V4L2_PIX_FMT_BGR32,
+ .depth = 32,
+ .twformat = ColorFormatRGB32,
+ }, {
+ .name = "32 bpp RGB, be",
+ .fourcc = V4L2_PIX_FMT_RGB32,
+ .depth = 32,
+ .twformat = ColorFormatRGB32 | ColorFormatBSWAP |
+ ColorFormatWSWAP,
+ }, {
+ .name = "4:2:2 packed, YUYV",
+ .fourcc = V4L2_PIX_FMT_YUYV,
+ .depth = 16,
+ .twformat = ColorFormatYUY2,
+ }, {
+ .name = "4:2:2 packed, UYVY",
+ .fourcc = V4L2_PIX_FMT_UYVY,
+ .depth = 16,
+ .twformat = ColorFormatYUY2 | ColorFormatBSWAP,
+ }
+};
+#define FORMATS ARRAY_SIZE(formats)
+
+#define NORM_625_50 \
+ .h_delay = 3, \
+ .h_delay0 = 133, \
+ .h_start = 0, \
+ .h_stop = 719, \
+ .v_delay = 24, \
+ .vbi_v_start_0 = 7, \
+ .vbi_v_stop_0 = 22, \
+ .video_v_start = 24, \
+ .video_v_stop = 311, \
+ .vbi_v_start_1 = 319
+
+#define NORM_525_60 \
+ .h_delay = 8, \
+ .h_delay0 = 138, \
+ .h_start = 0, \
+ .h_stop = 719, \
+ .v_delay = 22, \
+ .vbi_v_start_0 = 10, \
+ .vbi_v_stop_0 = 21, \
+ .video_v_start = 22, \
+ .video_v_stop = 262, \
+ .vbi_v_start_1 = 273
+
+/*
+ * The following table is searched by tw68_s_std, first for a specific
+ * match, then for an entry which contains the desired id. The table
+ * entries should therefore be ordered in ascending order of specificity.
+ */
+static const struct tw68_tvnorm tvnorms[] = {
+ {
+ .name = "PAL", /* autodetect */
+ .id = V4L2_STD_PAL,
+ NORM_625_50,
+
+ .sync_control = 0x18,
+ .luma_control = 0x40,
+ .chroma_ctrl1 = 0x81,
+ .chroma_gain = 0x2a,
+ .chroma_ctrl2 = 0x06,
+ .vgate_misc = 0x1c,
+ .format = VideoFormatPALBDGHI,
+ }, {
+ .name = "NTSC",
+ .id = V4L2_STD_NTSC,
+ NORM_525_60,
+
+ .sync_control = 0x59,
+ .luma_control = 0x40,
+ .chroma_ctrl1 = 0x89,
+ .chroma_gain = 0x2a,
+ .chroma_ctrl2 = 0x0e,
+ .vgate_misc = 0x18,
+ .format = VideoFormatNTSC,
+ }, {
+ .name = "SECAM",
+ .id = V4L2_STD_SECAM,
+ NORM_625_50,
+
+ .sync_control = 0x18,
+ .luma_control = 0x1b,
+ .chroma_ctrl1 = 0xd1,
+ .chroma_gain = 0x80,
+ .chroma_ctrl2 = 0x00,
+ .vgate_misc = 0x1c,
+ .format = VideoFormatSECAM,
+ }, {
+ .name = "PAL-M",
+ .id = V4L2_STD_PAL_M,
+ NORM_525_60,
+
+ .sync_control = 0x59,
+ .luma_control = 0x40,
+ .chroma_ctrl1 = 0xb9,
+ .chroma_gain = 0x2a,
+ .chroma_ctrl2 = 0x0e,
+ .vgate_misc = 0x18,
+ .format = VideoFormatPALM,
+ }, {
+ .name = "PAL-Nc",
+ .id = V4L2_STD_PAL_Nc,
+ NORM_625_50,
+
+ .sync_control = 0x18,
+ .luma_control = 0x40,
+ .chroma_ctrl1 = 0xa1,
+ .chroma_gain = 0x2a,
+ .chroma_ctrl2 = 0x06,
+ .vgate_misc = 0x1c,
+ .format = VideoFormatPALNC,
+ }, {
+ .name = "PAL-60",
+ .id = V4L2_STD_PAL_60,
+ .h_delay = 186,
+ .h_start = 0,
+ .h_stop = 719,
+ .v_delay = 26,
+ .video_v_start = 23,
+ .video_v_stop = 262,
+ .vbi_v_start_0 = 10,
+ .vbi_v_stop_0 = 21,
+ .vbi_v_start_1 = 273,
+
+ .sync_control = 0x18,
+ .luma_control = 0x40,
+ .chroma_ctrl1 = 0x81,
+ .chroma_gain = 0x2a,
+ .chroma_ctrl2 = 0x06,
+ .vgate_misc = 0x1c,
+ .format = VideoFormatPAL60,
+ }
+};
+#define TVNORMS ARRAY_SIZE(tvnorms)
+
+static const struct tw68_format *format_by_fourcc(unsigned int fourcc)
+{
+ unsigned int i;
+
+ for (i = 0; i < FORMATS; i++)
+ if (formats[i].fourcc == fourcc)
+ return formats+i;
+ return NULL;
+}
+
+
+/* ------------------------------------------------------------------ */
+/*
+ * Note that the cropping rectangles are described in terms of a single
+ * frame, i.e. line positions are only 1/2 the interlaced equivalent
+ */
+static void set_tvnorm(struct tw68_dev *dev, const struct tw68_tvnorm *norm)
+{
+ if (norm != dev->tvnorm) {
+ dev->width = 720;
+ dev->height = (norm->id & V4L2_STD_525_60) ? 480 : 576;
+ dev->tvnorm = norm;
+ tw68_set_tvnorm_hw(dev);
+ }
+}
+
+/*
+ * tw68_set_scale
+ *
+ * Scaling and Cropping for video decoding
+ *
+ * We are working with 3 values for horizontal and vertical - scale,
+ * delay and active.
+ *
+ * HACTIVE represent the actual number of pixels in the "usable" image,
+ * before scaling. HDELAY represents the number of pixels skipped
+ * between the start of the horizontal sync and the start of the image.
+ * HSCALE is calculated using the formula
+ * HSCALE = (HACTIVE / (#pixels desired)) * 256
+ *
+ * The vertical registers are similar, except based upon the total number
+ * of lines in the image, and the first line of the image (i.e. ignoring
+ * vertical sync and VBI).
+ *
+ * Note that the number of bytes reaching the FIFO (and hence needing
+ * to be processed by the DMAP program) is completely dependent upon
+ * these values, especially HSCALE.
+ *
+ * Parameters:
+ * @dev pointer to the device structure, needed for
+ * getting current norm (as well as debug print)
+ * @width actual image width (from user buffer)
+ * @height actual image height
+ * @field indicates Top, Bottom or Interlaced
+ */
+static int tw68_set_scale(struct tw68_dev *dev, unsigned int width,
+ unsigned int height, enum v4l2_field field)
+{
+ const struct tw68_tvnorm *norm = dev->tvnorm;
+ /* set individually for debugging clarity */
+ int hactive, hdelay, hscale;
+ int vactive, vdelay, vscale;
+ int comb;
+
+ if (V4L2_FIELD_HAS_BOTH(field)) /* if field is interlaced */
+ height /= 2; /* we must set for 1-frame */
+
+ pr_debug("%s: width=%d, height=%d, both=%d\n"
+ " tvnorm h_delay=%d, h_start=%d, h_stop=%d, "
+ "v_delay=%d, v_start=%d, v_stop=%d\n" , __func__,
+ width, height, V4L2_FIELD_HAS_BOTH(field),
+ norm->h_delay, norm->h_start, norm->h_stop,
+ norm->v_delay, norm->video_v_start,
+ norm->video_v_stop);
+
+ switch (dev->vdecoder) {
+ case TW6800:
+ hdelay = norm->h_delay0;
+ break;
+ default:
+ hdelay = norm->h_delay;
+ break;
+ }
+
+ hdelay += norm->h_start;
+ hactive = norm->h_stop - norm->h_start + 1;
+
+ hscale = (hactive * 256) / (width);
+
+ vdelay = norm->v_delay;
+ vactive = ((norm->id & V4L2_STD_525_60) ? 524 : 624) / 2 - norm->video_v_start;
+ vscale = (vactive * 256) / height;
+
+ pr_debug("%s: %dx%d [%s%s,%s]\n", __func__,
+ width, height,
+ V4L2_FIELD_HAS_TOP(field) ? "T" : "",
+ V4L2_FIELD_HAS_BOTTOM(field) ? "B" : "",
+ v4l2_norm_to_name(dev->tvnorm->id));
+ pr_debug("%s: hactive=%d, hdelay=%d, hscale=%d; "
+ "vactive=%d, vdelay=%d, vscale=%d\n", __func__,
+ hactive, hdelay, hscale, vactive, vdelay, vscale);
+
+ comb = ((vdelay & 0x300) >> 2) |
+ ((vactive & 0x300) >> 4) |
+ ((hdelay & 0x300) >> 6) |
+ ((hactive & 0x300) >> 8);
+ pr_debug("%s: setting CROP_HI=%02x, VDELAY_LO=%02x, "
+ "VACTIVE_LO=%02x, HDELAY_LO=%02x, HACTIVE_LO=%02x\n",
+ __func__, comb, vdelay, vactive, hdelay, hactive);
+ tw_writeb(TW68_CROP_HI, comb);
+ tw_writeb(TW68_VDELAY_LO, vdelay & 0xff);
+ tw_writeb(TW68_VACTIVE_LO, vactive & 0xff);
+ tw_writeb(TW68_HDELAY_LO, hdelay & 0xff);
+ tw_writeb(TW68_HACTIVE_LO, hactive & 0xff);
+
+ comb = ((vscale & 0xf00) >> 4) | ((hscale & 0xf00) >> 8);
+ pr_debug("%s: setting SCALE_HI=%02x, VSCALE_LO=%02x, "
+ "HSCALE_LO=%02x\n", __func__, comb, vscale, hscale);
+ tw_writeb(TW68_SCALE_HI, comb);
+ tw_writeb(TW68_VSCALE_LO, vscale);
+ tw_writeb(TW68_HSCALE_LO, hscale);
+
+ return 0;
+}
+
+/* ------------------------------------------------------------------ */
+
+int tw68_video_start_dma(struct tw68_dev *dev, struct tw68_buf *buf)
+{
+ /* Set cropping and scaling */
+ tw68_set_scale(dev, dev->width, dev->height, dev->field);
+ /*
+ * Set start address for RISC program. Note that if the DMAP
+ * processor is currently running, it must be stopped before
+ * a new address can be set.
+ */
+ tw_clearl(TW68_DMAC, TW68_DMAP_EN);
+ tw_writel(TW68_DMAP_SA, buf->dma);
+ /* Clear any pending interrupts */
+ tw_writel(TW68_INTSTAT, dev->board_virqmask);
+ /* Enable the risc engine and the fifo */
+ tw_andorl(TW68_DMAC, 0xff, dev->fmt->twformat |
+ ColorFormatGamma | TW68_DMAP_EN | TW68_FIFO_EN);
+ dev->pci_irqmask |= dev->board_virqmask;
+ tw_setl(TW68_INTMASK, dev->pci_irqmask);
+ return 0;
+}
+
+/* ------------------------------------------------------------------ */
+
+/* calc max # of buffers from size (must not exceed the 4MB virtual
+ * address space per DMA channel) */
+static int tw68_buffer_count(unsigned int size, unsigned int count)
+{
+ unsigned int maxcount;
+
+ maxcount = (4 * 1024 * 1024) / roundup(size, PAGE_SIZE);
+ if (count > maxcount)
+ count = maxcount;
+ return count;
+}
+
+/* ------------------------------------------------------------- */
+/* vb2 queue operations */
+
+static int tw68_queue_setup(struct vb2_queue *q, const struct v4l2_format *fmt,
+ unsigned int *num_buffers, unsigned int *num_planes,
+ unsigned int sizes[], void *alloc_ctxs[])
+{
+ struct tw68_dev *dev = vb2_get_drv_priv(q);
+ unsigned tot_bufs = q->num_buffers + *num_buffers;
+
+ sizes[0] = (dev->fmt->depth * dev->width * dev->height) >> 3;
+ alloc_ctxs[0] = dev->alloc_ctx;
+ /*
+ * We allow create_bufs, but only if the sizeimage is the same as the
+ * current sizeimage. The tw68_buffer_count calculation becomes quite
+ * difficult otherwise.
+ */
+ if (fmt && fmt->fmt.pix.sizeimage < sizes[0])
+ return -EINVAL;
+ *num_planes = 1;
+ if (tot_bufs < 2)
+ tot_bufs = 2;
+ tot_bufs = tw68_buffer_count(sizes[0], tot_bufs);
+ *num_buffers = tot_bufs - q->num_buffers;
+
+ return 0;
+}
+
+/*
+ * The risc program for each buffers works as follows: it starts with a simple
+ * 'JUMP to addr + 8', which is effectively a NOP. Then the program to DMA the
+ * buffer follows and at the end we have a JUMP back to the start + 8 (skipping
+ * the initial JUMP).
+ *
+ * This is the program of the first buffer to be queued if the active list is
+ * empty and it just keeps DMAing this buffer without generating any interrupts.
+ *
+ * If a new buffer is added then the initial JUMP in the program generates an
+ * interrupt as well which signals that the previous buffer has been DMAed
+ * successfully and that it can be returned to userspace.
+ *
+ * It also sets the final jump of the previous buffer to the start of the new
+ * buffer, thus chaining the new buffer into the DMA chain. This is a single
+ * atomic u32 write, so there is no race condition.
+ *
+ * The end-result of all this that you only get an interrupt when a buffer
+ * is ready, so the control flow is very easy.
+ */
+static void tw68_buf_queue(struct vb2_buffer *vb)
+{
+ struct vb2_queue *vq = vb->vb2_queue;
+ struct tw68_dev *dev = vb2_get_drv_priv(vq);
+ struct tw68_buf *buf = container_of(vb, struct tw68_buf, vb);
+ struct tw68_buf *prev;
+ unsigned long flags;
+
+ spin_lock_irqsave(&dev->slock, flags);
+
+ /* append a 'JUMP to start of buffer' to the buffer risc program */
+ buf->jmp[0] = cpu_to_le32(RISC_JUMP);
+ buf->jmp[1] = cpu_to_le32(buf->dma + 8);
+
+ if (!list_empty(&dev->active)) {
+ prev = list_entry(dev->active.prev, struct tw68_buf, list);
+ buf->cpu[0] |= cpu_to_le32(RISC_INT_BIT);
+ prev->jmp[1] = cpu_to_le32(buf->dma);
+ }
+ list_add_tail(&buf->list, &dev->active);
+ spin_unlock_irqrestore(&dev->slock, flags);
+}
+
+/*
+ * buffer_prepare
+ *
+ * Set the ancilliary information into the buffer structure. This
+ * includes generating the necessary risc program if it hasn't already
+ * been done for the current buffer format.
+ * The structure fh contains the details of the format requested by the
+ * user - type, width, height and #fields. This is compared with the
+ * last format set for the current buffer. If they differ, the risc
+ * code (which controls the filling of the buffer) is (re-)generated.
+ */
+static int tw68_buf_prepare(struct vb2_buffer *vb)
+{
+ struct vb2_queue *vq = vb->vb2_queue;
+ struct tw68_dev *dev = vb2_get_drv_priv(vq);
+ struct tw68_buf *buf = container_of(vb, struct tw68_buf, vb);
+ struct sg_table *dma = vb2_dma_sg_plane_desc(vb, 0);
+ unsigned size, bpl;
+
+ size = (dev->width * dev->height * dev->fmt->depth) >> 3;
+ if (vb2_plane_size(vb, 0) < size)
+ return -EINVAL;
+ vb2_set_plane_payload(vb, 0, size);
+
+ bpl = (dev->width * dev->fmt->depth) >> 3;
+ switch (dev->field) {
+ case V4L2_FIELD_TOP:
+ tw68_risc_buffer(dev->pci, buf, dma->sgl,
+ 0, UNSET, bpl, 0, dev->height);
+ break;
+ case V4L2_FIELD_BOTTOM:
+ tw68_risc_buffer(dev->pci, buf, dma->sgl,
+ UNSET, 0, bpl, 0, dev->height);
+ break;
+ case V4L2_FIELD_SEQ_TB:
+ tw68_risc_buffer(dev->pci, buf, dma->sgl,
+ 0, bpl * (dev->height >> 1),
+ bpl, 0, dev->height >> 1);
+ break;
+ case V4L2_FIELD_SEQ_BT:
+ tw68_risc_buffer(dev->pci, buf, dma->sgl,
+ bpl * (dev->height >> 1), 0,
+ bpl, 0, dev->height >> 1);
+ break;
+ case V4L2_FIELD_INTERLACED:
+ default:
+ tw68_risc_buffer(dev->pci, buf, dma->sgl,
+ 0, bpl, bpl, bpl, dev->height >> 1);
+ break;
+ }
+ return 0;
+}
+
+static void tw68_buf_finish(struct vb2_buffer *vb)
+{
+ struct vb2_queue *vq = vb->vb2_queue;
+ struct tw68_dev *dev = vb2_get_drv_priv(vq);
+ struct tw68_buf *buf = container_of(vb, struct tw68_buf, vb);
+
+ pci_free_consistent(dev->pci, buf->size, buf->cpu, buf->dma);
+}
+
+static int tw68_start_streaming(struct vb2_queue *q, unsigned int count)
+{
+ struct tw68_dev *dev = vb2_get_drv_priv(q);
+ struct tw68_buf *buf =
+ container_of(dev->active.next, struct tw68_buf, list);
+
+ dev->seqnr = 0;
+ tw68_video_start_dma(dev, buf);
+ return 0;
+}
+
+static void tw68_stop_streaming(struct vb2_queue *q)
+{
+ struct tw68_dev *dev = vb2_get_drv_priv(q);
+
+ /* Stop risc & fifo */
+ tw_clearl(TW68_DMAC, TW68_DMAP_EN | TW68_FIFO_EN);
+ while (!list_empty(&dev->active)) {
+ struct tw68_buf *buf =
+ container_of(dev->active.next, struct tw68_buf, list);
+
+ list_del(&buf->list);
+ vb2_buffer_done(&buf->vb, VB2_BUF_STATE_ERROR);
+ }
+}
+
+static struct vb2_ops tw68_video_qops = {
+ .queue_setup = tw68_queue_setup,
+ .buf_queue = tw68_buf_queue,
+ .buf_prepare = tw68_buf_prepare,
+ .buf_finish = tw68_buf_finish,
+ .start_streaming = tw68_start_streaming,
+ .stop_streaming = tw68_stop_streaming,
+ .wait_prepare = vb2_ops_wait_prepare,
+ .wait_finish = vb2_ops_wait_finish,
+};
+
+/* ------------------------------------------------------------------ */
+
+static int tw68_s_ctrl(struct v4l2_ctrl *ctrl)
+{
+ struct tw68_dev *dev =
+ container_of(ctrl->handler, struct tw68_dev, hdl);
+
+ switch (ctrl->id) {
+ case V4L2_CID_BRIGHTNESS:
+ tw_writeb(TW68_BRIGHT, ctrl->val);
+ break;
+ case V4L2_CID_HUE:
+ tw_writeb(TW68_HUE, ctrl->val);
+ break;
+ case V4L2_CID_CONTRAST:
+ tw_writeb(TW68_CONTRAST, ctrl->val);
+ break;
+ case V4L2_CID_SATURATION:
+ tw_writeb(TW68_SAT_U, ctrl->val);
+ tw_writeb(TW68_SAT_V, ctrl->val);
+ break;
+ case V4L2_CID_COLOR_KILLER:
+ if (ctrl->val)
+ tw_andorb(TW68_MISC2, 0xe0, 0xe0);
+ else
+ tw_andorb(TW68_MISC2, 0xe0, 0x00);
+ break;
+ case V4L2_CID_CHROMA_AGC:
+ if (ctrl->val)
+ tw_andorb(TW68_LOOP, 0x30, 0x20);
+ else
+ tw_andorb(TW68_LOOP, 0x30, 0x00);
+ break;
+ }
+ return 0;
+}
+
+/* ------------------------------------------------------------------ */
+
+/*
+ * Note that this routine returns what is stored in the fh structure, and
+ * does not interrogate any of the device registers.
+ */
+static int tw68_g_fmt_vid_cap(struct file *file, void *priv,
+ struct v4l2_format *f)
+{
+ struct tw68_dev *dev = video_drvdata(file);
+
+ f->fmt.pix.width = dev->width;
+ f->fmt.pix.height = dev->height;
+ f->fmt.pix.field = dev->field;
+ f->fmt.pix.pixelformat = dev->fmt->fourcc;
+ f->fmt.pix.bytesperline =
+ (f->fmt.pix.width * (dev->fmt->depth)) >> 3;
+ f->fmt.pix.sizeimage =
+ f->fmt.pix.height * f->fmt.pix.bytesperline;
+ f->fmt.pix.colorspace = V4L2_COLORSPACE_SMPTE170M;
+ f->fmt.pix.priv = 0;
+ return 0;
+}
+
+static int tw68_try_fmt_vid_cap(struct file *file, void *priv,
+ struct v4l2_format *f)
+{
+ struct tw68_dev *dev = video_drvdata(file);
+ const struct tw68_format *fmt;
+ enum v4l2_field field;
+ unsigned int maxh;
+
+ fmt = format_by_fourcc(f->fmt.pix.pixelformat);
+ if (NULL == fmt)
+ return -EINVAL;
+
+ field = f->fmt.pix.field;
+ maxh = (dev->tvnorm->id & V4L2_STD_525_60) ? 480 : 576;
+
+ switch (field) {
+ case V4L2_FIELD_TOP:
+ case V4L2_FIELD_BOTTOM:
+ break;
+ case V4L2_FIELD_INTERLACED:
+ case V4L2_FIELD_SEQ_BT:
+ case V4L2_FIELD_SEQ_TB:
+ maxh = maxh * 2;
+ break;
+ default:
+ field = (f->fmt.pix.height > maxh / 2)
+ ? V4L2_FIELD_INTERLACED
+ : V4L2_FIELD_BOTTOM;
+ break;
+ }
+
+ f->fmt.pix.field = field;
+ if (f->fmt.pix.width < 48)
+ f->fmt.pix.width = 48;
+ if (f->fmt.pix.height < 32)
+ f->fmt.pix.height = 32;
+ if (f->fmt.pix.width > 720)
+ f->fmt.pix.width = 720;
+ if (f->fmt.pix.height > maxh)
+ f->fmt.pix.height = maxh;
+ f->fmt.pix.width &= ~0x03;
+ f->fmt.pix.bytesperline =
+ (f->fmt.pix.width * (fmt->depth)) >> 3;
+ f->fmt.pix.sizeimage =
+ f->fmt.pix.height * f->fmt.pix.bytesperline;
+ f->fmt.pix.colorspace = V4L2_COLORSPACE_SMPTE170M;
+ return 0;
+}
+
+/*
+ * Note that tw68_s_fmt_vid_cap sets the information into the fh structure,
+ * and it will be used for all future new buffers. However, there could be
+ * some number of buffers on the "active" chain which will be filled before
+ * the change takes place.
+ */
+static int tw68_s_fmt_vid_cap(struct file *file, void *priv,
+ struct v4l2_format *f)
+{
+ struct tw68_dev *dev = video_drvdata(file);
+ int err;
+
+ err = tw68_try_fmt_vid_cap(file, priv, f);
+ if (0 != err)
+ return err;
+
+ dev->fmt = format_by_fourcc(f->fmt.pix.pixelformat);
+ dev->width = f->fmt.pix.width;
+ dev->height = f->fmt.pix.height;
+ dev->field = f->fmt.pix.field;
+ return 0;
+}
+
+static int tw68_enum_input(struct file *file, void *priv,
+ struct v4l2_input *i)
+{
+ struct tw68_dev *dev = video_drvdata(file);
+ unsigned int n;
+
+ n = i->index;
+ if (n >= TW68_INPUT_MAX)
+ return -EINVAL;
+ i->index = n;
+ i->type = V4L2_INPUT_TYPE_CAMERA;
+ snprintf(i->name, sizeof(i->name), "Composite %d", n);
+
+ /* If the query is for the current input, get live data */
+ if (n == dev->input) {
+ int v1 = tw_readb(TW68_STATUS1);
+ int v2 = tw_readb(TW68_MVSN);
+
+ if (0 != (v1 & (1 << 7)))
+ i->status |= V4L2_IN_ST_NO_SYNC;
+ if (0 != (v1 & (1 << 6)))
+ i->status |= V4L2_IN_ST_NO_H_LOCK;
+ if (0 != (v1 & (1 << 2)))
+ i->status |= V4L2_IN_ST_NO_SIGNAL;
+ if (0 != (v1 & 1 << 1))
+ i->status |= V4L2_IN_ST_NO_COLOR;
+ if (0 != (v2 & (1 << 2)))
+ i->status |= V4L2_IN_ST_MACROVISION;
+ }
+ i->std = video_devdata(file)->tvnorms;
+ return 0;
+}
+
+static int tw68_g_input(struct file *file, void *priv, unsigned int *i)
+{
+ struct tw68_dev *dev = video_drvdata(file);
+
+ *i = dev->input;
+ return 0;
+}
+
+static int tw68_s_input(struct file *file, void *priv, unsigned int i)
+{
+ struct tw68_dev *dev = video_drvdata(file);
+
+ if (i >= TW68_INPUT_MAX)
+ return -EINVAL;
+ dev->input = i;
+ tw_andorb(TW68_INFORM, 0x03 << 2, dev->input << 2);
+ return 0;
+}
+
+static int tw68_querycap(struct file *file, void *priv,
+ struct v4l2_capability *cap)
+{
+ struct tw68_dev *dev = video_drvdata(file);
+
+ strcpy(cap->driver, "tw68");
+ strlcpy(cap->card, "Techwell Capture Card",
+ sizeof(cap->card));
+ sprintf(cap->bus_info, "PCI:%s", pci_name(dev->pci));
+ cap->device_caps =
+ V4L2_CAP_VIDEO_CAPTURE |
+ V4L2_CAP_READWRITE |
+ V4L2_CAP_STREAMING;
+
+ cap->capabilities = cap->device_caps | V4L2_CAP_DEVICE_CAPS;
+ return 0;
+}
+
+static int tw68_s_std(struct file *file, void *priv, v4l2_std_id id)
+{
+ struct tw68_dev *dev = video_drvdata(file);
+ unsigned int i;
+
+ if (vb2_is_busy(&dev->vidq))
+ return -EBUSY;
+
+ /* Look for match on complete norm id (may have mult bits) */
+ for (i = 0; i < TVNORMS; i++) {
+ if (id == tvnorms[i].id)
+ break;
+ }
+
+ /* If no exact match, look for norm which contains this one */
+ if (i == TVNORMS) {
+ for (i = 0; i < TVNORMS; i++)
+ if (id & tvnorms[i].id)
+ break;
+ }
+ /* If still not matched, give up */
+ if (i == TVNORMS)
+ return -EINVAL;
+
+ set_tvnorm(dev, &tvnorms[i]); /* do the actual setting */
+ return 0;
+}
+
+static int tw68_g_std(struct file *file, void *priv, v4l2_std_id *id)
+{
+ struct tw68_dev *dev = video_drvdata(file);
+
+ *id = dev->tvnorm->id;
+ return 0;
+}
+
+static int tw68_enum_fmt_vid_cap(struct file *file, void *priv,
+ struct v4l2_fmtdesc *f)
+{
+ if (f->index >= FORMATS)
+ return -EINVAL;
+
+ strlcpy(f->description, formats[f->index].name,
+ sizeof(f->description));
+
+ f->pixelformat = formats[f->index].fourcc;
+
+ return 0;
+}
+
+/*
+ * Used strictly for internal development and debugging, this routine
+ * prints out the current register contents for the tw68xx device.
+ */
+static void tw68_dump_regs(struct tw68_dev *dev)
+{
+ unsigned char line[80];
+ int i, j, k;
+ unsigned char *cptr;
+
+ pr_info("Full dump of TW68 registers:\n");
+ /* First we do the PCI regs, 8 4-byte regs per line */
+ for (i = 0; i < 0x100; i += 32) {
+ cptr = line;
+ cptr += sprintf(cptr, "%03x ", i);
+ /* j steps through the next 4 words */
+ for (j = i; j < i + 16; j += 4)
+ cptr += sprintf(cptr, "%08x ", tw_readl(j));
+ *cptr++ = ' ';
+ for (; j < i + 32; j += 4)
+ cptr += sprintf(cptr, "%08x ", tw_readl(j));
+ *cptr++ = '\n';
+ *cptr = 0;
+ pr_info("%s", line);
+ }
+ /* Next the control regs, which are single-byte, address mod 4 */
+ while (i < 0x400) {
+ cptr = line;
+ cptr += sprintf(cptr, "%03x ", i);
+ /* Print out 4 groups of 4 bytes */
+ for (j = 0; j < 4; j++) {
+ for (k = 0; k < 4; k++) {
+ cptr += sprintf(cptr, "%02x ",
+ tw_readb(i));
+ i += 4;
+ }
+ *cptr++ = ' ';
+ }
+ *cptr++ = '\n';
+ *cptr = 0;
+ pr_info("%s", line);
+ }
+}
+
+static int vidioc_log_status(struct file *file, void *priv)
+{
+ struct tw68_dev *dev = video_drvdata(file);
+
+ tw68_dump_regs(dev);
+ return v4l2_ctrl_log_status(file, priv);
+}
+
+#ifdef CONFIG_VIDEO_ADV_DEBUG
+static int vidioc_g_register(struct file *file, void *priv,
+ struct v4l2_dbg_register *reg)
+{
+ struct tw68_dev *dev = video_drvdata(file);
+
+ if (reg->size == 1)
+ reg->val = tw_readb(reg->reg);
+ else
+ reg->val = tw_readl(reg->reg);
+ return 0;
+}
+
+static int vidioc_s_register(struct file *file, void *priv,
+ const struct v4l2_dbg_register *reg)
+{
+ struct tw68_dev *dev = video_drvdata(file);
+
+ if (reg->size == 1)
+ tw_writeb(reg->reg, reg->val);
+ else
+ tw_writel(reg->reg & 0xffff, reg->val);
+ return 0;
+}
+#endif
+
+static const struct v4l2_ctrl_ops tw68_ctrl_ops = {
+ .s_ctrl = tw68_s_ctrl,
+};
+
+static const struct v4l2_file_operations video_fops = {
+ .owner = THIS_MODULE,
+ .open = v4l2_fh_open,
+ .release = vb2_fop_release,
+ .read = vb2_fop_read,
+ .poll = vb2_fop_poll,
+ .mmap = vb2_fop_mmap,
+ .unlocked_ioctl = video_ioctl2,
+};
+
+static const struct v4l2_ioctl_ops video_ioctl_ops = {
+ .vidioc_querycap = tw68_querycap,
+ .vidioc_enum_fmt_vid_cap = tw68_enum_fmt_vid_cap,
+ .vidioc_reqbufs = vb2_ioctl_reqbufs,
+ .vidioc_create_bufs = vb2_ioctl_create_bufs,
+ .vidioc_querybuf = vb2_ioctl_querybuf,
+ .vidioc_qbuf = vb2_ioctl_qbuf,
+ .vidioc_dqbuf = vb2_ioctl_dqbuf,
+ .vidioc_s_std = tw68_s_std,
+ .vidioc_g_std = tw68_g_std,
+ .vidioc_enum_input = tw68_enum_input,
+ .vidioc_g_input = tw68_g_input,
+ .vidioc_s_input = tw68_s_input,
+ .vidioc_streamon = vb2_ioctl_streamon,
+ .vidioc_streamoff = vb2_ioctl_streamoff,
+ .vidioc_g_fmt_vid_cap = tw68_g_fmt_vid_cap,
+ .vidioc_try_fmt_vid_cap = tw68_try_fmt_vid_cap,
+ .vidioc_s_fmt_vid_cap = tw68_s_fmt_vid_cap,
+ .vidioc_log_status = vidioc_log_status,
+ .vidioc_subscribe_event = v4l2_ctrl_subscribe_event,
+ .vidioc_unsubscribe_event = v4l2_event_unsubscribe,
+#ifdef CONFIG_VIDEO_ADV_DEBUG
+ .vidioc_g_register = vidioc_g_register,
+ .vidioc_s_register = vidioc_s_register,
+#endif
+};
+
+static struct video_device tw68_video_template = {
+ .name = "tw68_video",
+ .fops = &video_fops,
+ .ioctl_ops = &video_ioctl_ops,
+ .release = video_device_release_empty,
+ .tvnorms = TW68_NORMS,
+};
+
+/* ------------------------------------------------------------------ */
+/* exported stuff */
+void tw68_set_tvnorm_hw(struct tw68_dev *dev)
+{
+ tw_andorb(TW68_SDT, 0x07, dev->tvnorm->format);
+}
+
+int tw68_video_init1(struct tw68_dev *dev)
+{
+ struct v4l2_ctrl_handler *hdl = &dev->hdl;
+
+ v4l2_ctrl_handler_init(hdl, 6);
+ v4l2_ctrl_new_std(hdl, &tw68_ctrl_ops,
+ V4L2_CID_BRIGHTNESS, -128, 127, 1, 20);
+ v4l2_ctrl_new_std(hdl, &tw68_ctrl_ops,
+ V4L2_CID_CONTRAST, 0, 255, 1, 100);
+ v4l2_ctrl_new_std(hdl, &tw68_ctrl_ops,
+ V4L2_CID_SATURATION, 0, 255, 1, 128);
+ /* NTSC only */
+ v4l2_ctrl_new_std(hdl, &tw68_ctrl_ops,
+ V4L2_CID_HUE, -128, 127, 1, 0);
+ v4l2_ctrl_new_std(hdl, &tw68_ctrl_ops,
+ V4L2_CID_COLOR_KILLER, 0, 1, 1, 0);
+ v4l2_ctrl_new_std(hdl, &tw68_ctrl_ops,
+ V4L2_CID_CHROMA_AGC, 0, 1, 1, 1);
+ if (hdl->error) {
+ v4l2_ctrl_handler_free(hdl);
+ return hdl->error;
+ }
+ dev->v4l2_dev.ctrl_handler = hdl;
+ v4l2_ctrl_handler_setup(hdl);
+ return 0;
+}
+
+int tw68_video_init2(struct tw68_dev *dev, int video_nr)
+{
+ int ret;
+
+ set_tvnorm(dev, &tvnorms[0]);
+
+ dev->fmt = format_by_fourcc(V4L2_PIX_FMT_BGR24);
+ dev->width = 720;
+ dev->height = 576;
+ dev->field = V4L2_FIELD_INTERLACED;
+
+ INIT_LIST_HEAD(&dev->active);
+ dev->vidq.type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
+ dev->vidq.timestamp_flags = V4L2_BUF_FLAG_TIMESTAMP_MONOTONIC;
+ dev->vidq.io_modes = VB2_MMAP | VB2_USERPTR | VB2_READ | VB2_DMABUF;
+ dev->vidq.ops = &tw68_video_qops;
+ dev->vidq.mem_ops = &vb2_dma_sg_memops;
+ dev->vidq.drv_priv = dev;
+ dev->vidq.gfp_flags = __GFP_DMA32;
+ dev->vidq.buf_struct_size = sizeof(struct tw68_buf);
+ dev->vidq.lock = &dev->lock;
+ dev->vidq.min_buffers_needed = 2;
+ ret = vb2_queue_init(&dev->vidq);
+ if (ret)
+ return ret;
+ dev->vdev = tw68_video_template;
+ dev->vdev.v4l2_dev = &dev->v4l2_dev;
+ dev->vdev.lock = &dev->lock;
+ dev->vdev.queue = &dev->vidq;
+ video_set_drvdata(&dev->vdev, dev);
+ return video_register_device(&dev->vdev, VFL_TYPE_GRABBER, video_nr);
+}
+
+/*
+ * tw68_irq_video_done
+ */
+void tw68_irq_video_done(struct tw68_dev *dev, unsigned long status)
+{
+ __u32 reg;
+
+ /* reset interrupts handled by this routine */
+ tw_writel(TW68_INTSTAT, status);
+ /*
+ * Check most likely first
+ *
+ * DMAPI shows we have reached the end of the risc code
+ * for the current buffer.
+ */
+ if (status & TW68_DMAPI) {
+ struct tw68_buf *buf;
+
+ spin_lock(&dev->slock);
+ buf = list_entry(dev->active.next, struct tw68_buf, list);
+ list_del(&buf->list);
+ spin_unlock(&dev->slock);
+ v4l2_get_timestamp(&buf->vb.v4l2_buf.timestamp);
+ buf->vb.v4l2_buf.field = dev->field;
+ buf->vb.v4l2_buf.sequence = dev->seqnr++;
+ vb2_buffer_done(&buf->vb, VB2_BUF_STATE_DONE);
+ status &= ~(TW68_DMAPI);
+ if (0 == status)
+ return;
+ }
+ if (status & (TW68_VLOCK | TW68_HLOCK))
+ dev_dbg(&dev->pci->dev, "Lost sync\n");
+ if (status & TW68_PABORT)
+ dev_err(&dev->pci->dev, "PABORT interrupt\n");
+ if (status & TW68_DMAPERR)
+ dev_err(&dev->pci->dev, "DMAPERR interrupt\n");
+ /*
+ * On TW6800, FDMIS is apparently generated if video input is switched
+ * during operation. Therefore, it is not enabled for that chip.
+ */
+ if (status & TW68_FDMIS)
+ dev_dbg(&dev->pci->dev, "FDMIS interrupt\n");
+ if (status & TW68_FFOF) {
+ /* probably a logic error */
+ reg = tw_readl(TW68_DMAC) & TW68_FIFO_EN;
+ tw_clearl(TW68_DMAC, TW68_FIFO_EN);
+ dev_dbg(&dev->pci->dev, "FFOF interrupt\n");
+ tw_setl(TW68_DMAC, reg);
+ }
+ if (status & TW68_FFERR)
+ dev_dbg(&dev->pci->dev, "FFERR interrupt\n");
+}
diff --git a/kernel/drivers/media/pci/tw68/tw68.h b/kernel/drivers/media/pci/tw68/tw68.h
new file mode 100644
index 000000000..93f2335e0
--- /dev/null
+++ b/kernel/drivers/media/pci/tw68/tw68.h
@@ -0,0 +1,231 @@
+/*
+ * tw68 driver common header file
+ *
+ * Much of this code is derived from the cx88 and sa7134 drivers, which
+ * were in turn derived from the bt87x driver. The original work was by
+ * Gerd Knorr; more recently the code was enhanced by Mauro Carvalho Chehab,
+ * Hans Verkuil, Andy Walls and many others. Their work is gratefully
+ * acknowledged. Full credit goes to them - any problems within this code
+ * are mine.
+ *
+ * Copyright (C) 2009 William M. Brack
+ *
+ * Refactored and updated to the latest v4l core frameworks:
+ *
+ * Copyright (C) 2014 Hans Verkuil <hverkuil@xs4all.nl>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/pci.h>
+#include <linux/videodev2.h>
+#include <linux/notifier.h>
+#include <linux/delay.h>
+#include <linux/mutex.h>
+#include <linux/io.h>
+
+#include <media/v4l2-common.h>
+#include <media/v4l2-ioctl.h>
+#include <media/v4l2-ctrls.h>
+#include <media/v4l2-device.h>
+#include <media/videobuf2-dma-sg.h>
+
+#include "tw68-reg.h"
+
+#define UNSET (-1U)
+
+/* system vendor and device ID's */
+#define PCI_VENDOR_ID_TECHWELL 0x1797
+#define PCI_DEVICE_ID_6800 0x6800
+#define PCI_DEVICE_ID_6801 0x6801
+#define PCI_DEVICE_ID_AUDIO2 0x6802
+#define PCI_DEVICE_ID_TS3 0x6803
+#define PCI_DEVICE_ID_6804 0x6804
+#define PCI_DEVICE_ID_AUDIO5 0x6805
+#define PCI_DEVICE_ID_TS6 0x6806
+
+/* tw6816 based cards */
+#define PCI_DEVICE_ID_6816_1 0x6810
+#define PCI_DEVICE_ID_6816_2 0x6811
+#define PCI_DEVICE_ID_6816_3 0x6812
+#define PCI_DEVICE_ID_6816_4 0x6813
+
+#define TW68_NORMS ( \
+ V4L2_STD_NTSC | V4L2_STD_PAL | V4L2_STD_SECAM | \
+ V4L2_STD_PAL_M | V4L2_STD_PAL_Nc | V4L2_STD_PAL_60)
+
+#define TW68_VID_INTS (TW68_FFERR | TW68_PABORT | TW68_DMAPERR | \
+ TW68_FFOF | TW68_DMAPI)
+/* TW6800 chips have trouble with these, so we don't set them for that chip */
+#define TW68_VID_INTSX (TW68_FDMIS | TW68_HLOCK | TW68_VLOCK)
+
+#define TW68_I2C_INTS (TW68_SBERR | TW68_SBDONE | TW68_SBERR2 | \
+ TW68_SBDONE2)
+
+enum tw68_decoder_type {
+ TW6800,
+ TW6801,
+ TW6804,
+ TWXXXX,
+};
+
+/* ----------------------------------------------------------- */
+/* static data */
+
+struct tw68_tvnorm {
+ char *name;
+ v4l2_std_id id;
+
+ /* video decoder */
+ u32 sync_control;
+ u32 luma_control;
+ u32 chroma_ctrl1;
+ u32 chroma_gain;
+ u32 chroma_ctrl2;
+ u32 vgate_misc;
+
+ /* video scaler */
+ u32 h_delay;
+ u32 h_delay0; /* for TW6800 */
+ u32 h_start;
+ u32 h_stop;
+ u32 v_delay;
+ u32 video_v_start;
+ u32 video_v_stop;
+ u32 vbi_v_start_0;
+ u32 vbi_v_stop_0;
+ u32 vbi_v_start_1;
+
+ /* Techwell specific */
+ u32 format;
+};
+
+struct tw68_format {
+ char *name;
+ u32 fourcc;
+ u32 depth;
+ u32 twformat;
+};
+
+/* ----------------------------------------------------------- */
+/* card configuration */
+
+#define TW68_BOARD_NOAUTO UNSET
+#define TW68_BOARD_UNKNOWN 0
+#define TW68_BOARD_GENERIC_6802 1
+
+#define TW68_MAXBOARDS 16
+#define TW68_INPUT_MAX 4
+
+/* ----------------------------------------------------------- */
+/* device / file handle status */
+
+#define BUFFER_TIMEOUT msecs_to_jiffies(500) /* 0.5 seconds */
+
+struct tw68_dev; /* forward delclaration */
+
+/* buffer for one video/vbi/ts frame */
+struct tw68_buf {
+ struct vb2_buffer vb;
+ struct list_head list;
+
+ unsigned int size;
+ __le32 *cpu;
+ __le32 *jmp;
+ dma_addr_t dma;
+};
+
+struct tw68_fmt {
+ char *name;
+ u32 fourcc; /* v4l2 format id */
+ int depth;
+ int flags;
+ u32 twformat;
+};
+
+/* global device status */
+struct tw68_dev {
+ struct mutex lock;
+ spinlock_t slock;
+ u16 instance;
+ struct v4l2_device v4l2_dev;
+
+ /* various device info */
+ enum tw68_decoder_type vdecoder;
+ struct video_device vdev;
+ struct v4l2_ctrl_handler hdl;
+
+ /* pci i/o */
+ char *name;
+ struct pci_dev *pci;
+ unsigned char pci_rev, pci_lat;
+ u32 __iomem *lmmio;
+ u8 __iomem *bmmio;
+ u32 pci_irqmask;
+ /* The irq mask to be used will depend upon the chip type */
+ u32 board_virqmask;
+
+ /* video capture */
+ const struct tw68_format *fmt;
+ unsigned width, height;
+ unsigned seqnr;
+ unsigned field;
+ struct vb2_queue vidq;
+ struct list_head active;
+ void *alloc_ctx;
+
+ /* various v4l controls */
+ const struct tw68_tvnorm *tvnorm; /* video */
+
+ int input;
+};
+
+/* ----------------------------------------------------------- */
+
+#define tw_readl(reg) readl(dev->lmmio + ((reg) >> 2))
+#define tw_readb(reg) readb(dev->bmmio + (reg))
+#define tw_writel(reg, value) writel((value), dev->lmmio + ((reg) >> 2))
+#define tw_writeb(reg, value) writeb((value), dev->bmmio + (reg))
+
+#define tw_andorl(reg, mask, value) \
+ writel((readl(dev->lmmio+((reg)>>2)) & ~(mask)) |\
+ ((value) & (mask)), dev->lmmio+((reg)>>2))
+#define tw_andorb(reg, mask, value) \
+ writeb((readb(dev->bmmio + (reg)) & ~(mask)) |\
+ ((value) & (mask)), dev->bmmio+(reg))
+#define tw_setl(reg, bit) tw_andorl((reg), (bit), (bit))
+#define tw_setb(reg, bit) tw_andorb((reg), (bit), (bit))
+#define tw_clearl(reg, bit) \
+ writel((readl(dev->lmmio + ((reg) >> 2)) & ~(bit)), \
+ dev->lmmio + ((reg) >> 2))
+#define tw_clearb(reg, bit) \
+ writeb((readb(dev->bmmio+(reg)) & ~(bit)), \
+ dev->bmmio + (reg))
+
+#define tw_wait(us) { udelay(us); }
+
+/* ----------------------------------------------------------- */
+/* tw68-video.c */
+
+void tw68_set_tvnorm_hw(struct tw68_dev *dev);
+
+int tw68_video_init1(struct tw68_dev *dev);
+int tw68_video_init2(struct tw68_dev *dev, int video_nr);
+void tw68_irq_video_done(struct tw68_dev *dev, unsigned long status);
+int tw68_video_start_dma(struct tw68_dev *dev, struct tw68_buf *buf);
+
+/* ----------------------------------------------------------- */
+/* tw68-risc.c */
+
+int tw68_risc_buffer(struct pci_dev *pci, struct tw68_buf *buf,
+ struct scatterlist *sglist, unsigned int top_offset,
+ unsigned int bottom_offset, unsigned int bpl,
+ unsigned int padding, unsigned int lines);