summaryrefslogtreecommitdiffstats
path: root/kernel/drivers/media/common/saa7146
diff options
context:
space:
mode:
Diffstat (limited to 'kernel/drivers/media/common/saa7146')
-rw-r--r--kernel/drivers/media/common/saa7146/Kconfig9
-rw-r--r--kernel/drivers/media/common/saa7146/Makefile5
-rw-r--r--kernel/drivers/media/common/saa7146/saa7146_core.c587
-rw-r--r--kernel/drivers/media/common/saa7146/saa7146_fops.c648
-rw-r--r--kernel/drivers/media/common/saa7146/saa7146_hlp.c1048
-rw-r--r--kernel/drivers/media/common/saa7146/saa7146_i2c.c423
-rw-r--r--kernel/drivers/media/common/saa7146/saa7146_vbi.c498
-rw-r--r--kernel/drivers/media/common/saa7146/saa7146_video.c1309
8 files changed, 4527 insertions, 0 deletions
diff --git a/kernel/drivers/media/common/saa7146/Kconfig b/kernel/drivers/media/common/saa7146/Kconfig
new file mode 100644
index 000000000..769c6f814
--- /dev/null
+++ b/kernel/drivers/media/common/saa7146/Kconfig
@@ -0,0 +1,9 @@
+config VIDEO_SAA7146
+ tristate
+ depends on I2C && PCI
+
+config VIDEO_SAA7146_VV
+ tristate
+ depends on VIDEO_V4L2
+ select VIDEOBUF_DMA_SG
+ select VIDEO_SAA7146
diff --git a/kernel/drivers/media/common/saa7146/Makefile b/kernel/drivers/media/common/saa7146/Makefile
new file mode 100644
index 000000000..3219b00a8
--- /dev/null
+++ b/kernel/drivers/media/common/saa7146/Makefile
@@ -0,0 +1,5 @@
+saa7146-objs := saa7146_i2c.o saa7146_core.o
+saa7146_vv-objs := saa7146_fops.o saa7146_video.o saa7146_hlp.o saa7146_vbi.o
+
+obj-$(CONFIG_VIDEO_SAA7146) += saa7146.o
+obj-$(CONFIG_VIDEO_SAA7146_VV) += saa7146_vv.o
diff --git a/kernel/drivers/media/common/saa7146/saa7146_core.c b/kernel/drivers/media/common/saa7146/saa7146_core.c
new file mode 100644
index 000000000..1ff9f5323
--- /dev/null
+++ b/kernel/drivers/media/common/saa7146/saa7146_core.c
@@ -0,0 +1,587 @@
+/*
+ saa7146.o - driver for generic saa7146-based hardware
+
+ Copyright (C) 1998-2003 Michael Hunold <michael@mihu.de>
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <media/saa7146.h>
+#include <linux/module.h>
+
+static int saa7146_num;
+
+unsigned int saa7146_debug;
+
+module_param(saa7146_debug, uint, 0644);
+MODULE_PARM_DESC(saa7146_debug, "debug level (default: 0)");
+
+#if 0
+static void dump_registers(struct saa7146_dev* dev)
+{
+ int i = 0;
+
+ pr_info(" @ %li jiffies:\n", jiffies);
+ for (i = 0; i <= 0x148; i += 4)
+ pr_info("0x%03x: 0x%08x\n", i, saa7146_read(dev, i));
+}
+#endif
+
+/****************************************************************************
+ * gpio and debi helper functions
+ ****************************************************************************/
+
+void saa7146_setgpio(struct saa7146_dev *dev, int port, u32 data)
+{
+ u32 value = 0;
+
+ BUG_ON(port > 3);
+
+ value = saa7146_read(dev, GPIO_CTRL);
+ value &= ~(0xff << (8*port));
+ value |= (data << (8*port));
+ saa7146_write(dev, GPIO_CTRL, value);
+}
+
+/* This DEBI code is based on the saa7146 Stradis driver by Nathan Laredo */
+static inline int saa7146_wait_for_debi_done_sleep(struct saa7146_dev *dev,
+ unsigned long us1, unsigned long us2)
+{
+ unsigned long timeout;
+ int err;
+
+ /* wait for registers to be programmed */
+ timeout = jiffies + usecs_to_jiffies(us1);
+ while (1) {
+ err = time_after(jiffies, timeout);
+ if (saa7146_read(dev, MC2) & 2)
+ break;
+ if (err) {
+ pr_debug("%s: %s timed out while waiting for registers getting programmed\n",
+ dev->name, __func__);
+ return -ETIMEDOUT;
+ }
+ msleep(1);
+ }
+
+ /* wait for transfer to complete */
+ timeout = jiffies + usecs_to_jiffies(us2);
+ while (1) {
+ err = time_after(jiffies, timeout);
+ if (!(saa7146_read(dev, PSR) & SPCI_DEBI_S))
+ break;
+ saa7146_read(dev, MC2);
+ if (err) {
+ DEB_S("%s: %s timed out while waiting for transfer completion\n",
+ dev->name, __func__);
+ return -ETIMEDOUT;
+ }
+ msleep(1);
+ }
+
+ return 0;
+}
+
+static inline int saa7146_wait_for_debi_done_busyloop(struct saa7146_dev *dev,
+ unsigned long us1, unsigned long us2)
+{
+ unsigned long loops;
+
+ /* wait for registers to be programmed */
+ loops = us1;
+ while (1) {
+ if (saa7146_read(dev, MC2) & 2)
+ break;
+ if (!loops--) {
+ pr_err("%s: %s timed out while waiting for registers getting programmed\n",
+ dev->name, __func__);
+ return -ETIMEDOUT;
+ }
+ udelay(1);
+ }
+
+ /* wait for transfer to complete */
+ loops = us2 / 5;
+ while (1) {
+ if (!(saa7146_read(dev, PSR) & SPCI_DEBI_S))
+ break;
+ saa7146_read(dev, MC2);
+ if (!loops--) {
+ DEB_S("%s: %s timed out while waiting for transfer completion\n",
+ dev->name, __func__);
+ return -ETIMEDOUT;
+ }
+ udelay(5);
+ }
+
+ return 0;
+}
+
+int saa7146_wait_for_debi_done(struct saa7146_dev *dev, int nobusyloop)
+{
+ if (nobusyloop)
+ return saa7146_wait_for_debi_done_sleep(dev, 50000, 250000);
+ else
+ return saa7146_wait_for_debi_done_busyloop(dev, 50000, 250000);
+}
+
+/****************************************************************************
+ * general helper functions
+ ****************************************************************************/
+
+/* this is videobuf_vmalloc_to_sg() from videobuf-dma-sg.c
+ make sure virt has been allocated with vmalloc_32(), otherwise the BUG()
+ may be triggered on highmem machines */
+static struct scatterlist* vmalloc_to_sg(unsigned char *virt, int nr_pages)
+{
+ struct scatterlist *sglist;
+ struct page *pg;
+ int i;
+
+ sglist = kcalloc(nr_pages, sizeof(struct scatterlist), GFP_KERNEL);
+ if (NULL == sglist)
+ return NULL;
+ sg_init_table(sglist, nr_pages);
+ for (i = 0; i < nr_pages; i++, virt += PAGE_SIZE) {
+ pg = vmalloc_to_page(virt);
+ if (NULL == pg)
+ goto err;
+ BUG_ON(PageHighMem(pg));
+ sg_set_page(&sglist[i], pg, PAGE_SIZE, 0);
+ }
+ return sglist;
+
+ err:
+ kfree(sglist);
+ return NULL;
+}
+
+/********************************************************************************/
+/* common page table functions */
+
+void *saa7146_vmalloc_build_pgtable(struct pci_dev *pci, long length, struct saa7146_pgtable *pt)
+{
+ int pages = (length+PAGE_SIZE-1)/PAGE_SIZE;
+ void *mem = vmalloc_32(length);
+ int slen = 0;
+
+ if (NULL == mem)
+ goto err_null;
+
+ if (!(pt->slist = vmalloc_to_sg(mem, pages)))
+ goto err_free_mem;
+
+ if (saa7146_pgtable_alloc(pci, pt))
+ goto err_free_slist;
+
+ pt->nents = pages;
+ slen = pci_map_sg(pci,pt->slist,pt->nents,PCI_DMA_FROMDEVICE);
+ if (0 == slen)
+ goto err_free_pgtable;
+
+ if (0 != saa7146_pgtable_build_single(pci, pt, pt->slist, slen))
+ goto err_unmap_sg;
+
+ return mem;
+
+err_unmap_sg:
+ pci_unmap_sg(pci, pt->slist, pt->nents, PCI_DMA_FROMDEVICE);
+err_free_pgtable:
+ saa7146_pgtable_free(pci, pt);
+err_free_slist:
+ kfree(pt->slist);
+ pt->slist = NULL;
+err_free_mem:
+ vfree(mem);
+err_null:
+ return NULL;
+}
+
+void saa7146_vfree_destroy_pgtable(struct pci_dev *pci, void *mem, struct saa7146_pgtable *pt)
+{
+ pci_unmap_sg(pci, pt->slist, pt->nents, PCI_DMA_FROMDEVICE);
+ saa7146_pgtable_free(pci, pt);
+ kfree(pt->slist);
+ pt->slist = NULL;
+ vfree(mem);
+}
+
+void saa7146_pgtable_free(struct pci_dev *pci, struct saa7146_pgtable *pt)
+{
+ if (NULL == pt->cpu)
+ return;
+ pci_free_consistent(pci, pt->size, pt->cpu, pt->dma);
+ pt->cpu = NULL;
+}
+
+int saa7146_pgtable_alloc(struct pci_dev *pci, struct saa7146_pgtable *pt)
+{
+ __le32 *cpu;
+ dma_addr_t dma_addr = 0;
+
+ cpu = pci_alloc_consistent(pci, PAGE_SIZE, &dma_addr);
+ if (NULL == cpu) {
+ return -ENOMEM;
+ }
+ pt->size = PAGE_SIZE;
+ pt->cpu = cpu;
+ pt->dma = dma_addr;
+
+ return 0;
+}
+
+int saa7146_pgtable_build_single(struct pci_dev *pci, struct saa7146_pgtable *pt,
+ struct scatterlist *list, int sglen )
+{
+ __le32 *ptr, fill;
+ int nr_pages = 0;
+ int i,p;
+
+ BUG_ON(0 == sglen);
+ BUG_ON(list->offset > PAGE_SIZE);
+
+ /* if we have a user buffer, the first page may not be
+ aligned to a page boundary. */
+ pt->offset = list->offset;
+
+ ptr = pt->cpu;
+ for (i = 0; i < sglen; i++, list++) {
+/*
+ pr_debug("i:%d, adr:0x%08x, len:%d, offset:%d\n",
+ i, sg_dma_address(list), sg_dma_len(list),
+ list->offset);
+*/
+ for (p = 0; p * 4096 < list->length; p++, ptr++) {
+ *ptr = cpu_to_le32(sg_dma_address(list) + p * 4096);
+ nr_pages++;
+ }
+ }
+
+
+ /* safety; fill the page table up with the last valid page */
+ fill = *(ptr-1);
+ for(i=nr_pages;i<1024;i++) {
+ *ptr++ = fill;
+ }
+
+/*
+ ptr = pt->cpu;
+ pr_debug("offset: %d\n", pt->offset);
+ for(i=0;i<5;i++) {
+ pr_debug("ptr1 %d: 0x%08x\n", i, ptr[i]);
+ }
+*/
+ return 0;
+}
+
+/********************************************************************************/
+/* interrupt handler */
+static irqreturn_t interrupt_hw(int irq, void *dev_id)
+{
+ struct saa7146_dev *dev = dev_id;
+ u32 isr;
+ u32 ack_isr;
+
+ /* read out the interrupt status register */
+ ack_isr = isr = saa7146_read(dev, ISR);
+
+ /* is this our interrupt? */
+ if ( 0 == isr ) {
+ /* nope, some other device */
+ return IRQ_NONE;
+ }
+
+ if (dev->ext) {
+ if (dev->ext->irq_mask & isr) {
+ if (dev->ext->irq_func)
+ dev->ext->irq_func(dev, &isr);
+ isr &= ~dev->ext->irq_mask;
+ }
+ }
+ if (0 != (isr & (MASK_27))) {
+ DEB_INT("irq: RPS0 (0x%08x)\n", isr);
+ if (dev->vv_data && dev->vv_callback)
+ dev->vv_callback(dev,isr);
+ isr &= ~MASK_27;
+ }
+ if (0 != (isr & (MASK_28))) {
+ if (dev->vv_data && dev->vv_callback)
+ dev->vv_callback(dev,isr);
+ isr &= ~MASK_28;
+ }
+ if (0 != (isr & (MASK_16|MASK_17))) {
+ SAA7146_IER_DISABLE(dev, MASK_16|MASK_17);
+ /* only wake up if we expect something */
+ if (0 != dev->i2c_op) {
+ dev->i2c_op = 0;
+ wake_up(&dev->i2c_wq);
+ } else {
+ u32 psr = saa7146_read(dev, PSR);
+ u32 ssr = saa7146_read(dev, SSR);
+ pr_warn("%s: unexpected i2c irq: isr %08x psr %08x ssr %08x\n",
+ dev->name, isr, psr, ssr);
+ }
+ isr &= ~(MASK_16|MASK_17);
+ }
+ if( 0 != isr ) {
+ ERR("warning: interrupt enabled, but not handled properly.(0x%08x)\n",
+ isr);
+ ERR("disabling interrupt source(s)!\n");
+ SAA7146_IER_DISABLE(dev,isr);
+ }
+ saa7146_write(dev, ISR, ack_isr);
+ return IRQ_HANDLED;
+}
+
+/*********************************************************************************/
+/* configuration-functions */
+
+static int saa7146_init_one(struct pci_dev *pci, const struct pci_device_id *ent)
+{
+ struct saa7146_pci_extension_data *pci_ext = (struct saa7146_pci_extension_data *)ent->driver_data;
+ struct saa7146_extension *ext = pci_ext->ext;
+ struct saa7146_dev *dev;
+ int err = -ENOMEM;
+
+ /* clear out mem for sure */
+ dev = kzalloc(sizeof(struct saa7146_dev), GFP_KERNEL);
+ if (!dev) {
+ ERR("out of memory\n");
+ goto out;
+ }
+
+ /* create a nice device name */
+ sprintf(dev->name, "saa7146 (%d)", saa7146_num);
+
+ DEB_EE("pci:%p\n", pci);
+
+ err = pci_enable_device(pci);
+ if (err < 0) {
+ ERR("pci_enable_device() failed\n");
+ goto err_free;
+ }
+
+ /* enable bus-mastering */
+ pci_set_master(pci);
+
+ dev->pci = pci;
+
+ /* get chip-revision; this is needed to enable bug-fixes */
+ dev->revision = pci->revision;
+
+ /* remap the memory from virtual to physical address */
+
+ err = pci_request_region(pci, 0, "saa7146");
+ if (err < 0)
+ goto err_disable;
+
+ dev->mem = ioremap(pci_resource_start(pci, 0),
+ pci_resource_len(pci, 0));
+ if (!dev->mem) {
+ ERR("ioremap() failed\n");
+ err = -ENODEV;
+ goto err_release;
+ }
+
+ /* we don't do a master reset here anymore, it screws up
+ some boards that don't have an i2c-eeprom for configuration
+ values */
+/*
+ saa7146_write(dev, MC1, MASK_31);
+*/
+
+ /* disable all irqs */
+ saa7146_write(dev, IER, 0);
+
+ /* shut down all dma transfers and rps tasks */
+ saa7146_write(dev, MC1, 0x30ff0000);
+
+ /* clear out any rps-signals pending */
+ saa7146_write(dev, MC2, 0xf8000000);
+
+ /* request an interrupt for the saa7146 */
+ err = request_irq(pci->irq, interrupt_hw, IRQF_SHARED,
+ dev->name, dev);
+ if (err < 0) {
+ ERR("request_irq() failed\n");
+ goto err_unmap;
+ }
+
+ err = -ENOMEM;
+
+ /* get memory for various stuff */
+ dev->d_rps0.cpu_addr = pci_zalloc_consistent(pci, SAA7146_RPS_MEM,
+ &dev->d_rps0.dma_handle);
+ if (!dev->d_rps0.cpu_addr)
+ goto err_free_irq;
+
+ dev->d_rps1.cpu_addr = pci_zalloc_consistent(pci, SAA7146_RPS_MEM,
+ &dev->d_rps1.dma_handle);
+ if (!dev->d_rps1.cpu_addr)
+ goto err_free_rps0;
+
+ dev->d_i2c.cpu_addr = pci_zalloc_consistent(pci, SAA7146_RPS_MEM,
+ &dev->d_i2c.dma_handle);
+ if (!dev->d_i2c.cpu_addr)
+ goto err_free_rps1;
+
+ /* the rest + print status message */
+
+ pr_info("found saa7146 @ mem %p (revision %d, irq %d) (0x%04x,0x%04x)\n",
+ dev->mem, dev->revision, pci->irq,
+ pci->subsystem_vendor, pci->subsystem_device);
+ dev->ext = ext;
+
+ mutex_init(&dev->v4l2_lock);
+ spin_lock_init(&dev->int_slock);
+ spin_lock_init(&dev->slock);
+
+ mutex_init(&dev->i2c_lock);
+
+ dev->module = THIS_MODULE;
+ init_waitqueue_head(&dev->i2c_wq);
+
+ /* set some sane pci arbitrition values */
+ saa7146_write(dev, PCI_BT_V1, 0x1c00101f);
+
+ /* TODO: use the status code of the callback */
+
+ err = -ENODEV;
+
+ if (ext->probe && ext->probe(dev)) {
+ DEB_D("ext->probe() failed for %p. skipping device.\n", dev);
+ goto err_free_i2c;
+ }
+
+ if (ext->attach(dev, pci_ext)) {
+ DEB_D("ext->attach() failed for %p. skipping device.\n", dev);
+ goto err_free_i2c;
+ }
+ /* V4L extensions will set the pci drvdata to the v4l2_device in the
+ attach() above. So for those cards that do not use V4L we have to
+ set it explicitly. */
+ pci_set_drvdata(pci, &dev->v4l2_dev);
+
+ saa7146_num++;
+
+ err = 0;
+out:
+ return err;
+
+err_free_i2c:
+ pci_free_consistent(pci, SAA7146_RPS_MEM, dev->d_i2c.cpu_addr,
+ dev->d_i2c.dma_handle);
+err_free_rps1:
+ pci_free_consistent(pci, SAA7146_RPS_MEM, dev->d_rps1.cpu_addr,
+ dev->d_rps1.dma_handle);
+err_free_rps0:
+ pci_free_consistent(pci, SAA7146_RPS_MEM, dev->d_rps0.cpu_addr,
+ dev->d_rps0.dma_handle);
+err_free_irq:
+ free_irq(pci->irq, (void *)dev);
+err_unmap:
+ iounmap(dev->mem);
+err_release:
+ pci_release_region(pci, 0);
+err_disable:
+ pci_disable_device(pci);
+err_free:
+ kfree(dev);
+ goto out;
+}
+
+static void saa7146_remove_one(struct pci_dev *pdev)
+{
+ struct v4l2_device *v4l2_dev = pci_get_drvdata(pdev);
+ struct saa7146_dev *dev = to_saa7146_dev(v4l2_dev);
+ struct {
+ void *addr;
+ dma_addr_t dma;
+ } dev_map[] = {
+ { dev->d_i2c.cpu_addr, dev->d_i2c.dma_handle },
+ { dev->d_rps1.cpu_addr, dev->d_rps1.dma_handle },
+ { dev->d_rps0.cpu_addr, dev->d_rps0.dma_handle },
+ { NULL, 0 }
+ }, *p;
+
+ DEB_EE("dev:%p\n", dev);
+
+ dev->ext->detach(dev);
+
+ /* shut down all video dma transfers */
+ saa7146_write(dev, MC1, 0x00ff0000);
+
+ /* disable all irqs, release irq-routine */
+ saa7146_write(dev, IER, 0);
+
+ free_irq(pdev->irq, dev);
+
+ for (p = dev_map; p->addr; p++)
+ pci_free_consistent(pdev, SAA7146_RPS_MEM, p->addr, p->dma);
+
+ iounmap(dev->mem);
+ pci_release_region(pdev, 0);
+ pci_disable_device(pdev);
+ kfree(dev);
+
+ saa7146_num--;
+}
+
+/*********************************************************************************/
+/* extension handling functions */
+
+int saa7146_register_extension(struct saa7146_extension* ext)
+{
+ DEB_EE("ext:%p\n", ext);
+
+ ext->driver.name = ext->name;
+ ext->driver.id_table = ext->pci_tbl;
+ ext->driver.probe = saa7146_init_one;
+ ext->driver.remove = saa7146_remove_one;
+
+ pr_info("register extension '%s'\n", ext->name);
+ return pci_register_driver(&ext->driver);
+}
+
+int saa7146_unregister_extension(struct saa7146_extension* ext)
+{
+ DEB_EE("ext:%p\n", ext);
+ pr_info("unregister extension '%s'\n", ext->name);
+ pci_unregister_driver(&ext->driver);
+ return 0;
+}
+
+EXPORT_SYMBOL_GPL(saa7146_register_extension);
+EXPORT_SYMBOL_GPL(saa7146_unregister_extension);
+
+/* misc functions used by extension modules */
+EXPORT_SYMBOL_GPL(saa7146_pgtable_alloc);
+EXPORT_SYMBOL_GPL(saa7146_pgtable_free);
+EXPORT_SYMBOL_GPL(saa7146_pgtable_build_single);
+EXPORT_SYMBOL_GPL(saa7146_vmalloc_build_pgtable);
+EXPORT_SYMBOL_GPL(saa7146_vfree_destroy_pgtable);
+EXPORT_SYMBOL_GPL(saa7146_wait_for_debi_done);
+
+EXPORT_SYMBOL_GPL(saa7146_setgpio);
+
+EXPORT_SYMBOL_GPL(saa7146_i2c_adapter_prepare);
+
+EXPORT_SYMBOL_GPL(saa7146_debug);
+
+MODULE_AUTHOR("Michael Hunold <michael@mihu.de>");
+MODULE_DESCRIPTION("driver for generic saa7146-based hardware");
+MODULE_LICENSE("GPL");
diff --git a/kernel/drivers/media/common/saa7146/saa7146_fops.c b/kernel/drivers/media/common/saa7146/saa7146_fops.c
new file mode 100644
index 000000000..df1e8c975
--- /dev/null
+++ b/kernel/drivers/media/common/saa7146/saa7146_fops.c
@@ -0,0 +1,648 @@
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <media/saa7146_vv.h>
+#include <linux/module.h>
+
+/****************************************************************************/
+/* resource management functions, shamelessly stolen from saa7134 driver */
+
+int saa7146_res_get(struct saa7146_fh *fh, unsigned int bit)
+{
+ struct saa7146_dev *dev = fh->dev;
+ struct saa7146_vv *vv = dev->vv_data;
+
+ if (fh->resources & bit) {
+ DEB_D("already allocated! want: 0x%02x, cur:0x%02x\n",
+ bit, vv->resources);
+ /* have it already allocated */
+ return 1;
+ }
+
+ /* is it free? */
+ if (vv->resources & bit) {
+ DEB_D("locked! vv->resources:0x%02x, we want:0x%02x\n",
+ vv->resources, bit);
+ /* no, someone else uses it */
+ return 0;
+ }
+ /* it's free, grab it */
+ fh->resources |= bit;
+ vv->resources |= bit;
+ DEB_D("res: get 0x%02x, cur:0x%02x\n", bit, vv->resources);
+ return 1;
+}
+
+void saa7146_res_free(struct saa7146_fh *fh, unsigned int bits)
+{
+ struct saa7146_dev *dev = fh->dev;
+ struct saa7146_vv *vv = dev->vv_data;
+
+ BUG_ON((fh->resources & bits) != bits);
+
+ fh->resources &= ~bits;
+ vv->resources &= ~bits;
+ DEB_D("res: put 0x%02x, cur:0x%02x\n", bits, vv->resources);
+}
+
+
+/********************************************************************************/
+/* common dma functions */
+
+void saa7146_dma_free(struct saa7146_dev *dev,struct videobuf_queue *q,
+ struct saa7146_buf *buf)
+{
+ struct videobuf_dmabuf *dma=videobuf_to_dma(&buf->vb);
+ DEB_EE("dev:%p, buf:%p\n", dev, buf);
+
+ BUG_ON(in_interrupt());
+
+ videobuf_waiton(q, &buf->vb, 0, 0);
+ videobuf_dma_unmap(q->dev, dma);
+ videobuf_dma_free(dma);
+ buf->vb.state = VIDEOBUF_NEEDS_INIT;
+}
+
+
+/********************************************************************************/
+/* common buffer functions */
+
+int saa7146_buffer_queue(struct saa7146_dev *dev,
+ struct saa7146_dmaqueue *q,
+ struct saa7146_buf *buf)
+{
+ assert_spin_locked(&dev->slock);
+ DEB_EE("dev:%p, dmaq:%p, buf:%p\n", dev, q, buf);
+
+ BUG_ON(!q);
+
+ if (NULL == q->curr) {
+ q->curr = buf;
+ DEB_D("immediately activating buffer %p\n", buf);
+ buf->activate(dev,buf,NULL);
+ } else {
+ list_add_tail(&buf->vb.queue,&q->queue);
+ buf->vb.state = VIDEOBUF_QUEUED;
+ DEB_D("adding buffer %p to queue. (active buffer present)\n",
+ buf);
+ }
+ return 0;
+}
+
+void saa7146_buffer_finish(struct saa7146_dev *dev,
+ struct saa7146_dmaqueue *q,
+ int state)
+{
+ assert_spin_locked(&dev->slock);
+ DEB_EE("dev:%p, dmaq:%p, state:%d\n", dev, q, state);
+ DEB_EE("q->curr:%p\n", q->curr);
+
+ BUG_ON(!q->curr);
+
+ /* finish current buffer */
+ if (NULL == q->curr) {
+ DEB_D("aiii. no current buffer\n");
+ return;
+ }
+
+ q->curr->vb.state = state;
+ v4l2_get_timestamp(&q->curr->vb.ts);
+ wake_up(&q->curr->vb.done);
+
+ q->curr = NULL;
+}
+
+void saa7146_buffer_next(struct saa7146_dev *dev,
+ struct saa7146_dmaqueue *q, int vbi)
+{
+ struct saa7146_buf *buf,*next = NULL;
+
+ BUG_ON(!q);
+
+ DEB_INT("dev:%p, dmaq:%p, vbi:%d\n", dev, q, vbi);
+
+ assert_spin_locked(&dev->slock);
+ if (!list_empty(&q->queue)) {
+ /* activate next one from queue */
+ buf = list_entry(q->queue.next,struct saa7146_buf,vb.queue);
+ list_del(&buf->vb.queue);
+ if (!list_empty(&q->queue))
+ next = list_entry(q->queue.next,struct saa7146_buf, vb.queue);
+ q->curr = buf;
+ DEB_INT("next buffer: buf:%p, prev:%p, next:%p\n",
+ buf, q->queue.prev, q->queue.next);
+ buf->activate(dev,buf,next);
+ } else {
+ DEB_INT("no next buffer. stopping.\n");
+ if( 0 != vbi ) {
+ /* turn off video-dma3 */
+ saa7146_write(dev,MC1, MASK_20);
+ } else {
+ /* nothing to do -- just prevent next video-dma1 transfer
+ by lowering the protection address */
+
+ // fixme: fix this for vflip != 0
+
+ saa7146_write(dev, PROT_ADDR1, 0);
+ saa7146_write(dev, MC2, (MASK_02|MASK_18));
+
+ /* write the address of the rps-program */
+ saa7146_write(dev, RPS_ADDR0, dev->d_rps0.dma_handle);
+ /* turn on rps */
+ saa7146_write(dev, MC1, (MASK_12 | MASK_28));
+
+/*
+ printk("vdma%d.base_even: 0x%08x\n", 1,saa7146_read(dev,BASE_EVEN1));
+ printk("vdma%d.base_odd: 0x%08x\n", 1,saa7146_read(dev,BASE_ODD1));
+ printk("vdma%d.prot_addr: 0x%08x\n", 1,saa7146_read(dev,PROT_ADDR1));
+ printk("vdma%d.base_page: 0x%08x\n", 1,saa7146_read(dev,BASE_PAGE1));
+ printk("vdma%d.pitch: 0x%08x\n", 1,saa7146_read(dev,PITCH1));
+ printk("vdma%d.num_line_byte: 0x%08x\n", 1,saa7146_read(dev,NUM_LINE_BYTE1));
+*/
+ }
+ del_timer(&q->timeout);
+ }
+}
+
+void saa7146_buffer_timeout(unsigned long data)
+{
+ struct saa7146_dmaqueue *q = (struct saa7146_dmaqueue*)data;
+ struct saa7146_dev *dev = q->dev;
+ unsigned long flags;
+
+ DEB_EE("dev:%p, dmaq:%p\n", dev, q);
+
+ spin_lock_irqsave(&dev->slock,flags);
+ if (q->curr) {
+ DEB_D("timeout on %p\n", q->curr);
+ saa7146_buffer_finish(dev,q,VIDEOBUF_ERROR);
+ }
+
+ /* we don't restart the transfer here like other drivers do. when
+ a streaming capture is disabled, the timeout function will be
+ called for the current buffer. if we activate the next buffer now,
+ we mess up our capture logic. if a timeout occurs on another buffer,
+ then something is seriously broken before, so no need to buffer the
+ next capture IMHO... */
+/*
+ saa7146_buffer_next(dev,q);
+*/
+ spin_unlock_irqrestore(&dev->slock,flags);
+}
+
+/********************************************************************************/
+/* file operations */
+
+static int fops_open(struct file *file)
+{
+ struct video_device *vdev = video_devdata(file);
+ struct saa7146_dev *dev = video_drvdata(file);
+ struct saa7146_fh *fh = NULL;
+ int result = 0;
+
+ DEB_EE("file:%p, dev:%s\n", file, video_device_node_name(vdev));
+
+ if (mutex_lock_interruptible(vdev->lock))
+ return -ERESTARTSYS;
+
+ DEB_D("using: %p\n", dev);
+
+ /* check if an extension is registered */
+ if( NULL == dev->ext ) {
+ DEB_S("no extension registered for this device\n");
+ result = -ENODEV;
+ goto out;
+ }
+
+ /* allocate per open data */
+ fh = kzalloc(sizeof(*fh),GFP_KERNEL);
+ if (NULL == fh) {
+ DEB_S("cannot allocate memory for per open data\n");
+ result = -ENOMEM;
+ goto out;
+ }
+
+ v4l2_fh_init(&fh->fh, vdev);
+
+ file->private_data = &fh->fh;
+ fh->dev = dev;
+
+ if (vdev->vfl_type == VFL_TYPE_VBI) {
+ DEB_S("initializing vbi...\n");
+ if (dev->ext_vv_data->capabilities & V4L2_CAP_VBI_CAPTURE)
+ result = saa7146_vbi_uops.open(dev,file);
+ if (dev->ext_vv_data->vbi_fops.open)
+ dev->ext_vv_data->vbi_fops.open(file);
+ } else {
+ DEB_S("initializing video...\n");
+ result = saa7146_video_uops.open(dev,file);
+ }
+
+ if (0 != result) {
+ goto out;
+ }
+
+ if( 0 == try_module_get(dev->ext->module)) {
+ result = -EINVAL;
+ goto out;
+ }
+
+ result = 0;
+ v4l2_fh_add(&fh->fh);
+out:
+ if (fh && result != 0) {
+ kfree(fh);
+ file->private_data = NULL;
+ }
+ mutex_unlock(vdev->lock);
+ return result;
+}
+
+static int fops_release(struct file *file)
+{
+ struct video_device *vdev = video_devdata(file);
+ struct saa7146_fh *fh = file->private_data;
+ struct saa7146_dev *dev = fh->dev;
+
+ DEB_EE("file:%p\n", file);
+
+ mutex_lock(vdev->lock);
+
+ if (vdev->vfl_type == VFL_TYPE_VBI) {
+ if (dev->ext_vv_data->capabilities & V4L2_CAP_VBI_CAPTURE)
+ saa7146_vbi_uops.release(dev,file);
+ if (dev->ext_vv_data->vbi_fops.release)
+ dev->ext_vv_data->vbi_fops.release(file);
+ } else {
+ saa7146_video_uops.release(dev,file);
+ }
+
+ v4l2_fh_del(&fh->fh);
+ v4l2_fh_exit(&fh->fh);
+ module_put(dev->ext->module);
+ file->private_data = NULL;
+ kfree(fh);
+
+ mutex_unlock(vdev->lock);
+
+ return 0;
+}
+
+static int fops_mmap(struct file *file, struct vm_area_struct * vma)
+{
+ struct video_device *vdev = video_devdata(file);
+ struct saa7146_fh *fh = file->private_data;
+ struct videobuf_queue *q;
+ int res;
+
+ switch (vdev->vfl_type) {
+ case VFL_TYPE_GRABBER: {
+ DEB_EE("V4L2_BUF_TYPE_VIDEO_CAPTURE: file:%p, vma:%p\n",
+ file, vma);
+ q = &fh->video_q;
+ break;
+ }
+ case VFL_TYPE_VBI: {
+ DEB_EE("V4L2_BUF_TYPE_VBI_CAPTURE: file:%p, vma:%p\n",
+ file, vma);
+ if (fh->dev->ext_vv_data->capabilities & V4L2_CAP_SLICED_VBI_OUTPUT)
+ return -ENODEV;
+ q = &fh->vbi_q;
+ break;
+ }
+ default:
+ BUG();
+ }
+
+ if (mutex_lock_interruptible(vdev->lock))
+ return -ERESTARTSYS;
+ res = videobuf_mmap_mapper(q, vma);
+ mutex_unlock(vdev->lock);
+ return res;
+}
+
+static unsigned int __fops_poll(struct file *file, struct poll_table_struct *wait)
+{
+ struct video_device *vdev = video_devdata(file);
+ struct saa7146_fh *fh = file->private_data;
+ struct videobuf_buffer *buf = NULL;
+ struct videobuf_queue *q;
+ unsigned int res = v4l2_ctrl_poll(file, wait);
+
+ DEB_EE("file:%p, poll:%p\n", file, wait);
+
+ if (vdev->vfl_type == VFL_TYPE_VBI) {
+ if (fh->dev->ext_vv_data->capabilities & V4L2_CAP_SLICED_VBI_OUTPUT)
+ return res | POLLOUT | POLLWRNORM;
+ if( 0 == fh->vbi_q.streaming )
+ return res | videobuf_poll_stream(file, &fh->vbi_q, wait);
+ q = &fh->vbi_q;
+ } else {
+ DEB_D("using video queue\n");
+ q = &fh->video_q;
+ }
+
+ if (!list_empty(&q->stream))
+ buf = list_entry(q->stream.next, struct videobuf_buffer, stream);
+
+ if (!buf) {
+ DEB_D("buf == NULL!\n");
+ return res | POLLERR;
+ }
+
+ poll_wait(file, &buf->done, wait);
+ if (buf->state == VIDEOBUF_DONE || buf->state == VIDEOBUF_ERROR) {
+ DEB_D("poll succeeded!\n");
+ return res | POLLIN | POLLRDNORM;
+ }
+
+ DEB_D("nothing to poll for, buf->state:%d\n", buf->state);
+ return res;
+}
+
+static unsigned int fops_poll(struct file *file, struct poll_table_struct *wait)
+{
+ struct video_device *vdev = video_devdata(file);
+ unsigned int res;
+
+ mutex_lock(vdev->lock);
+ res = __fops_poll(file, wait);
+ mutex_unlock(vdev->lock);
+ return res;
+}
+
+static ssize_t fops_read(struct file *file, char __user *data, size_t count, loff_t *ppos)
+{
+ struct video_device *vdev = video_devdata(file);
+ struct saa7146_fh *fh = file->private_data;
+ int ret;
+
+ switch (vdev->vfl_type) {
+ case VFL_TYPE_GRABBER:
+/*
+ DEB_EE("V4L2_BUF_TYPE_VIDEO_CAPTURE: file:%p, data:%p, count:%lun",
+ file, data, (unsigned long)count);
+*/
+ return saa7146_video_uops.read(file,data,count,ppos);
+ case VFL_TYPE_VBI:
+/*
+ DEB_EE("V4L2_BUF_TYPE_VBI_CAPTURE: file:%p, data:%p, count:%lu\n",
+ file, data, (unsigned long)count);
+*/
+ if (fh->dev->ext_vv_data->capabilities & V4L2_CAP_VBI_CAPTURE) {
+ if (mutex_lock_interruptible(vdev->lock))
+ return -ERESTARTSYS;
+ ret = saa7146_vbi_uops.read(file, data, count, ppos);
+ mutex_unlock(vdev->lock);
+ return ret;
+ }
+ return -EINVAL;
+ default:
+ BUG();
+ }
+}
+
+static ssize_t fops_write(struct file *file, const char __user *data, size_t count, loff_t *ppos)
+{
+ struct video_device *vdev = video_devdata(file);
+ struct saa7146_fh *fh = file->private_data;
+ int ret;
+
+ switch (vdev->vfl_type) {
+ case VFL_TYPE_GRABBER:
+ return -EINVAL;
+ case VFL_TYPE_VBI:
+ if (fh->dev->ext_vv_data->vbi_fops.write) {
+ if (mutex_lock_interruptible(vdev->lock))
+ return -ERESTARTSYS;
+ ret = fh->dev->ext_vv_data->vbi_fops.write(file, data, count, ppos);
+ mutex_unlock(vdev->lock);
+ return ret;
+ }
+ return -EINVAL;
+ default:
+ BUG();
+ }
+}
+
+static const struct v4l2_file_operations video_fops =
+{
+ .owner = THIS_MODULE,
+ .open = fops_open,
+ .release = fops_release,
+ .read = fops_read,
+ .write = fops_write,
+ .poll = fops_poll,
+ .mmap = fops_mmap,
+ .unlocked_ioctl = video_ioctl2,
+};
+
+static void vv_callback(struct saa7146_dev *dev, unsigned long status)
+{
+ u32 isr = status;
+
+ DEB_INT("dev:%p, isr:0x%08x\n", dev, (u32)status);
+
+ if (0 != (isr & (MASK_27))) {
+ DEB_INT("irq: RPS0 (0x%08x)\n", isr);
+ saa7146_video_uops.irq_done(dev,isr);
+ }
+
+ if (0 != (isr & (MASK_28))) {
+ u32 mc2 = saa7146_read(dev, MC2);
+ if( 0 != (mc2 & MASK_15)) {
+ DEB_INT("irq: RPS1 vbi workaround (0x%08x)\n", isr);
+ wake_up(&dev->vv_data->vbi_wq);
+ saa7146_write(dev,MC2, MASK_31);
+ return;
+ }
+ DEB_INT("irq: RPS1 (0x%08x)\n", isr);
+ saa7146_vbi_uops.irq_done(dev,isr);
+ }
+}
+
+static const struct v4l2_ctrl_ops saa7146_ctrl_ops = {
+ .s_ctrl = saa7146_s_ctrl,
+};
+
+int saa7146_vv_init(struct saa7146_dev* dev, struct saa7146_ext_vv *ext_vv)
+{
+ struct v4l2_ctrl_handler *hdl = &dev->ctrl_handler;
+ struct v4l2_pix_format *fmt;
+ struct v4l2_vbi_format *vbi;
+ struct saa7146_vv *vv;
+ int err;
+
+ err = v4l2_device_register(&dev->pci->dev, &dev->v4l2_dev);
+ if (err)
+ return err;
+
+ v4l2_ctrl_handler_init(hdl, 6);
+ v4l2_ctrl_new_std(hdl, &saa7146_ctrl_ops,
+ V4L2_CID_BRIGHTNESS, 0, 255, 1, 128);
+ v4l2_ctrl_new_std(hdl, &saa7146_ctrl_ops,
+ V4L2_CID_CONTRAST, 0, 127, 1, 64);
+ v4l2_ctrl_new_std(hdl, &saa7146_ctrl_ops,
+ V4L2_CID_SATURATION, 0, 127, 1, 64);
+ v4l2_ctrl_new_std(hdl, &saa7146_ctrl_ops,
+ V4L2_CID_VFLIP, 0, 1, 1, 0);
+ v4l2_ctrl_new_std(hdl, &saa7146_ctrl_ops,
+ V4L2_CID_HFLIP, 0, 1, 1, 0);
+ if (hdl->error) {
+ err = hdl->error;
+ v4l2_ctrl_handler_free(hdl);
+ return err;
+ }
+ dev->v4l2_dev.ctrl_handler = hdl;
+
+ vv = kzalloc(sizeof(struct saa7146_vv), GFP_KERNEL);
+ if (vv == NULL) {
+ ERR("out of memory. aborting.\n");
+ v4l2_ctrl_handler_free(hdl);
+ return -ENOMEM;
+ }
+ ext_vv->vid_ops = saa7146_video_ioctl_ops;
+ ext_vv->vbi_ops = saa7146_vbi_ioctl_ops;
+ ext_vv->core_ops = &saa7146_video_ioctl_ops;
+
+ DEB_EE("dev:%p\n", dev);
+
+ /* set default values for video parts of the saa7146 */
+ saa7146_write(dev, BCS_CTRL, 0x80400040);
+
+ /* enable video-port pins */
+ saa7146_write(dev, MC1, (MASK_10 | MASK_26));
+
+ /* save per-device extension data (one extension can
+ handle different devices that might need different
+ configuration data) */
+ dev->ext_vv_data = ext_vv;
+
+ vv->d_clipping.cpu_addr =
+ pci_zalloc_consistent(dev->pci, SAA7146_CLIPPING_MEM,
+ &vv->d_clipping.dma_handle);
+ if( NULL == vv->d_clipping.cpu_addr ) {
+ ERR("out of memory. aborting.\n");
+ kfree(vv);
+ v4l2_ctrl_handler_free(hdl);
+ return -1;
+ }
+
+ saa7146_video_uops.init(dev,vv);
+ if (dev->ext_vv_data->capabilities & V4L2_CAP_VBI_CAPTURE)
+ saa7146_vbi_uops.init(dev,vv);
+
+ vv->ov_fb.fmt.width = vv->standard->h_max_out;
+ vv->ov_fb.fmt.height = vv->standard->v_max_out;
+ vv->ov_fb.fmt.pixelformat = V4L2_PIX_FMT_RGB565;
+ vv->ov_fb.fmt.bytesperline = 2 * vv->ov_fb.fmt.width;
+ vv->ov_fb.fmt.sizeimage = vv->ov_fb.fmt.bytesperline * vv->ov_fb.fmt.height;
+ vv->ov_fb.fmt.colorspace = V4L2_COLORSPACE_SRGB;
+
+ fmt = &vv->video_fmt;
+ fmt->width = 384;
+ fmt->height = 288;
+ fmt->pixelformat = V4L2_PIX_FMT_BGR24;
+ fmt->field = V4L2_FIELD_ANY;
+ fmt->colorspace = V4L2_COLORSPACE_SMPTE170M;
+ fmt->bytesperline = 3 * fmt->width;
+ fmt->sizeimage = fmt->bytesperline * fmt->height;
+
+ vbi = &vv->vbi_fmt;
+ vbi->sampling_rate = 27000000;
+ vbi->offset = 248; /* todo */
+ vbi->samples_per_line = 720 * 2;
+ vbi->sample_format = V4L2_PIX_FMT_GREY;
+
+ /* fixme: this only works for PAL */
+ vbi->start[0] = 5;
+ vbi->count[0] = 16;
+ vbi->start[1] = 312;
+ vbi->count[1] = 16;
+
+ init_timer(&vv->vbi_read_timeout);
+
+ vv->ov_fb.capability = V4L2_FBUF_CAP_LIST_CLIPPING;
+ vv->ov_fb.flags = V4L2_FBUF_FLAG_PRIMARY;
+ dev->vv_data = vv;
+ dev->vv_callback = &vv_callback;
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(saa7146_vv_init);
+
+int saa7146_vv_release(struct saa7146_dev* dev)
+{
+ struct saa7146_vv *vv = dev->vv_data;
+
+ DEB_EE("dev:%p\n", dev);
+
+ v4l2_device_unregister(&dev->v4l2_dev);
+ pci_free_consistent(dev->pci, SAA7146_CLIPPING_MEM, vv->d_clipping.cpu_addr, vv->d_clipping.dma_handle);
+ v4l2_ctrl_handler_free(&dev->ctrl_handler);
+ kfree(vv);
+ dev->vv_data = NULL;
+ dev->vv_callback = NULL;
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(saa7146_vv_release);
+
+int saa7146_register_device(struct video_device *vfd, struct saa7146_dev *dev,
+ char *name, int type)
+{
+ int err;
+ int i;
+
+ DEB_EE("dev:%p, name:'%s', type:%d\n", dev, name, type);
+
+ vfd->fops = &video_fops;
+ if (type == VFL_TYPE_GRABBER)
+ vfd->ioctl_ops = &dev->ext_vv_data->vid_ops;
+ else
+ vfd->ioctl_ops = &dev->ext_vv_data->vbi_ops;
+ vfd->release = video_device_release_empty;
+ vfd->lock = &dev->v4l2_lock;
+ vfd->v4l2_dev = &dev->v4l2_dev;
+ vfd->tvnorms = 0;
+ for (i = 0; i < dev->ext_vv_data->num_stds; i++)
+ vfd->tvnorms |= dev->ext_vv_data->stds[i].id;
+ strlcpy(vfd->name, name, sizeof(vfd->name));
+ video_set_drvdata(vfd, dev);
+
+ err = video_register_device(vfd, type, -1);
+ if (err < 0) {
+ ERR("cannot register v4l2 device. skipping.\n");
+ return err;
+ }
+
+ pr_info("%s: registered device %s [v4l2]\n",
+ dev->name, video_device_node_name(vfd));
+ return 0;
+}
+EXPORT_SYMBOL_GPL(saa7146_register_device);
+
+int saa7146_unregister_device(struct video_device *vfd, struct saa7146_dev *dev)
+{
+ DEB_EE("dev:%p\n", dev);
+
+ video_unregister_device(vfd);
+ return 0;
+}
+EXPORT_SYMBOL_GPL(saa7146_unregister_device);
+
+static int __init saa7146_vv_init_module(void)
+{
+ return 0;
+}
+
+
+static void __exit saa7146_vv_cleanup_module(void)
+{
+}
+
+module_init(saa7146_vv_init_module);
+module_exit(saa7146_vv_cleanup_module);
+
+MODULE_AUTHOR("Michael Hunold <michael@mihu.de>");
+MODULE_DESCRIPTION("video4linux driver for saa7146-based hardware");
+MODULE_LICENSE("GPL");
diff --git a/kernel/drivers/media/common/saa7146/saa7146_hlp.c b/kernel/drivers/media/common/saa7146/saa7146_hlp.c
new file mode 100644
index 000000000..be746d1ae
--- /dev/null
+++ b/kernel/drivers/media/common/saa7146/saa7146_hlp.c
@@ -0,0 +1,1048 @@
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/kernel.h>
+#include <linux/export.h>
+#include <media/saa7146_vv.h>
+
+static void calculate_output_format_register(struct saa7146_dev* saa, u32 palette, u32* clip_format)
+{
+ /* clear out the necessary bits */
+ *clip_format &= 0x0000ffff;
+ /* set these bits new */
+ *clip_format |= (( ((palette&0xf00)>>8) << 30) | ((palette&0x00f) << 24) | (((palette&0x0f0)>>4) << 16));
+}
+
+static void calculate_hps_source_and_sync(struct saa7146_dev *dev, int source, int sync, u32* hps_ctrl)
+{
+ *hps_ctrl &= ~(MASK_30 | MASK_31 | MASK_28);
+ *hps_ctrl |= (source << 30) | (sync << 28);
+}
+
+static void calculate_hxo_and_hyo(struct saa7146_vv *vv, u32* hps_h_scale, u32* hps_ctrl)
+{
+ int hyo = 0, hxo = 0;
+
+ hyo = vv->standard->v_offset;
+ hxo = vv->standard->h_offset;
+
+ *hps_h_scale &= ~(MASK_B0 | 0xf00);
+ *hps_h_scale |= (hxo << 0);
+
+ *hps_ctrl &= ~(MASK_W0 | MASK_B2);
+ *hps_ctrl |= (hyo << 12);
+}
+
+/* helper functions for the calculation of the horizontal- and vertical
+ scaling registers, clip-format-register etc ...
+ these functions take pointers to the (most-likely read-out
+ original-values) and manipulate them according to the requested
+ changes.
+*/
+
+/* hps_coeff used for CXY and CXUV; scale 1/1 -> scale 1/64 */
+static struct {
+ u16 hps_coeff;
+ u16 weight_sum;
+} hps_h_coeff_tab [] = {
+ {0x00, 2}, {0x02, 4}, {0x00, 4}, {0x06, 8}, {0x02, 8},
+ {0x08, 8}, {0x00, 8}, {0x1E, 16}, {0x0E, 8}, {0x26, 8},
+ {0x06, 8}, {0x42, 8}, {0x02, 8}, {0x80, 8}, {0x00, 8},
+ {0xFE, 16}, {0xFE, 8}, {0x7E, 8}, {0x7E, 8}, {0x3E, 8},
+ {0x3E, 8}, {0x1E, 8}, {0x1E, 8}, {0x0E, 8}, {0x0E, 8},
+ {0x06, 8}, {0x06, 8}, {0x02, 8}, {0x02, 8}, {0x00, 8},
+ {0x00, 8}, {0xFE, 16}, {0xFE, 8}, {0xFE, 8}, {0xFE, 8},
+ {0xFE, 8}, {0xFE, 8}, {0xFE, 8}, {0xFE, 8}, {0xFE, 8},
+ {0xFE, 8}, {0xFE, 8}, {0xFE, 8}, {0xFE, 8}, {0xFE, 8},
+ {0xFE, 8}, {0xFE, 8}, {0xFE, 8}, {0xFE, 8}, {0x7E, 8},
+ {0x7E, 8}, {0x3E, 8}, {0x3E, 8}, {0x1E, 8}, {0x1E, 8},
+ {0x0E, 8}, {0x0E, 8}, {0x06, 8}, {0x06, 8}, {0x02, 8},
+ {0x02, 8}, {0x00, 8}, {0x00, 8}, {0xFE, 16}
+};
+
+/* table of attenuation values for horizontal scaling */
+static u8 h_attenuation[] = { 1, 2, 4, 8, 2, 4, 8, 16, 0};
+
+/* calculate horizontal scale registers */
+static int calculate_h_scale_registers(struct saa7146_dev *dev,
+ int in_x, int out_x, int flip_lr,
+ u32* hps_ctrl, u32* hps_v_gain, u32* hps_h_prescale, u32* hps_h_scale)
+{
+ /* horizontal prescaler */
+ u32 dcgx = 0, xpsc = 0, xacm = 0, cxy = 0, cxuv = 0;
+ /* horizontal scaler */
+ u32 xim = 0, xp = 0, xsci =0;
+ /* vertical scale & gain */
+ u32 pfuv = 0;
+
+ /* helper variables */
+ u32 h_atten = 0, i = 0;
+
+ if ( 0 == out_x ) {
+ return -EINVAL;
+ }
+
+ /* mask out vanity-bit */
+ *hps_ctrl &= ~MASK_29;
+
+ /* calculate prescale-(xspc)-value: [n .. 1/2) : 1
+ [1/2 .. 1/3) : 2
+ [1/3 .. 1/4) : 3
+ ... */
+ if (in_x > out_x) {
+ xpsc = in_x / out_x;
+ }
+ else {
+ /* zooming */
+ xpsc = 1;
+ }
+
+ /* if flip_lr-bit is set, number of pixels after
+ horizontal prescaling must be < 384 */
+ if ( 0 != flip_lr ) {
+
+ /* set vanity bit */
+ *hps_ctrl |= MASK_29;
+
+ while (in_x / xpsc >= 384 )
+ xpsc++;
+ }
+ /* if zooming is wanted, number of pixels after
+ horizontal prescaling must be < 768 */
+ else {
+ while ( in_x / xpsc >= 768 )
+ xpsc++;
+ }
+
+ /* maximum prescale is 64 (p.69) */
+ if ( xpsc > 64 )
+ xpsc = 64;
+
+ /* keep xacm clear*/
+ xacm = 0;
+
+ /* set horizontal filter parameters (CXY = CXUV) */
+ cxy = hps_h_coeff_tab[( (xpsc - 1) < 63 ? (xpsc - 1) : 63 )].hps_coeff;
+ cxuv = cxy;
+
+ /* calculate and set horizontal fine scale (xsci) */
+
+ /* bypass the horizontal scaler ? */
+ if ( (in_x == out_x) && ( 1 == xpsc ) )
+ xsci = 0x400;
+ else
+ xsci = ( (1024 * in_x) / (out_x * xpsc) ) + xpsc;
+
+ /* set start phase for horizontal fine scale (xp) to 0 */
+ xp = 0;
+
+ /* set xim, if we bypass the horizontal scaler */
+ if ( 0x400 == xsci )
+ xim = 1;
+ else
+ xim = 0;
+
+ /* if the prescaler is bypassed, enable horizontal
+ accumulation mode (xacm) and clear dcgx */
+ if( 1 == xpsc ) {
+ xacm = 1;
+ dcgx = 0;
+ } else {
+ xacm = 0;
+ /* get best match in the table of attenuations
+ for horizontal scaling */
+ h_atten = hps_h_coeff_tab[( (xpsc - 1) < 63 ? (xpsc - 1) : 63 )].weight_sum;
+
+ for (i = 0; h_attenuation[i] != 0; i++) {
+ if (h_attenuation[i] >= h_atten)
+ break;
+ }
+
+ dcgx = i;
+ }
+
+ /* the horizontal scaling increment controls the UV filter
+ to reduce the bandwidth to improve the display quality,
+ so set it ... */
+ if ( xsci == 0x400)
+ pfuv = 0x00;
+ else if ( xsci < 0x600)
+ pfuv = 0x01;
+ else if ( xsci < 0x680)
+ pfuv = 0x11;
+ else if ( xsci < 0x700)
+ pfuv = 0x22;
+ else
+ pfuv = 0x33;
+
+
+ *hps_v_gain &= MASK_W0|MASK_B2;
+ *hps_v_gain |= (pfuv << 24);
+
+ *hps_h_scale &= ~(MASK_W1 | 0xf000);
+ *hps_h_scale |= (xim << 31) | (xp << 24) | (xsci << 12);
+
+ *hps_h_prescale |= (dcgx << 27) | ((xpsc-1) << 18) | (xacm << 17) | (cxy << 8) | (cxuv << 0);
+
+ return 0;
+}
+
+static struct {
+ u16 hps_coeff;
+ u16 weight_sum;
+} hps_v_coeff_tab [] = {
+ {0x0100, 2}, {0x0102, 4}, {0x0300, 4}, {0x0106, 8}, {0x0502, 8},
+ {0x0708, 8}, {0x0F00, 8}, {0x011E, 16}, {0x110E, 16}, {0x1926, 16},
+ {0x3906, 16}, {0x3D42, 16}, {0x7D02, 16}, {0x7F80, 16}, {0xFF00, 16},
+ {0x01FE, 32}, {0x01FE, 32}, {0x817E, 32}, {0x817E, 32}, {0xC13E, 32},
+ {0xC13E, 32}, {0xE11E, 32}, {0xE11E, 32}, {0xF10E, 32}, {0xF10E, 32},
+ {0xF906, 32}, {0xF906, 32}, {0xFD02, 32}, {0xFD02, 32}, {0xFF00, 32},
+ {0xFF00, 32}, {0x01FE, 64}, {0x01FE, 64}, {0x01FE, 64}, {0x01FE, 64},
+ {0x01FE, 64}, {0x01FE, 64}, {0x01FE, 64}, {0x01FE, 64}, {0x01FE, 64},
+ {0x01FE, 64}, {0x01FE, 64}, {0x01FE, 64}, {0x01FE, 64}, {0x01FE, 64},
+ {0x01FE, 64}, {0x01FE, 64}, {0x01FE, 64}, {0x01FE, 64}, {0x817E, 64},
+ {0x817E, 64}, {0xC13E, 64}, {0xC13E, 64}, {0xE11E, 64}, {0xE11E, 64},
+ {0xF10E, 64}, {0xF10E, 64}, {0xF906, 64}, {0xF906, 64}, {0xFD02, 64},
+ {0xFD02, 64}, {0xFF00, 64}, {0xFF00, 64}, {0x01FE, 128}
+};
+
+/* table of attenuation values for vertical scaling */
+static u16 v_attenuation[] = { 2, 4, 8, 16, 32, 64, 128, 256, 0};
+
+/* calculate vertical scale registers */
+static int calculate_v_scale_registers(struct saa7146_dev *dev, enum v4l2_field field,
+ int in_y, int out_y, u32* hps_v_scale, u32* hps_v_gain)
+{
+ int lpi = 0;
+
+ /* vertical scaling */
+ u32 yacm = 0, ysci = 0, yacl = 0, ypo = 0, ype = 0;
+ /* vertical scale & gain */
+ u32 dcgy = 0, cya_cyb = 0;
+
+ /* helper variables */
+ u32 v_atten = 0, i = 0;
+
+ /* error, if vertical zooming */
+ if ( in_y < out_y ) {
+ return -EINVAL;
+ }
+
+ /* linear phase interpolation may be used
+ if scaling is between 1 and 1/2 (both fields used)
+ or scaling is between 1/2 and 1/4 (if only one field is used) */
+
+ if (V4L2_FIELD_HAS_BOTH(field)) {
+ if( 2*out_y >= in_y) {
+ lpi = 1;
+ }
+ } else if (field == V4L2_FIELD_TOP
+ || field == V4L2_FIELD_ALTERNATE
+ || field == V4L2_FIELD_BOTTOM) {
+ if( 4*out_y >= in_y ) {
+ lpi = 1;
+ }
+ out_y *= 2;
+ }
+ if( 0 != lpi ) {
+
+ yacm = 0;
+ yacl = 0;
+ cya_cyb = 0x00ff;
+
+ /* calculate scaling increment */
+ if ( in_y > out_y )
+ ysci = ((1024 * in_y) / (out_y + 1)) - 1024;
+ else
+ ysci = 0;
+
+ dcgy = 0;
+
+ /* calculate ype and ypo */
+ ype = ysci / 16;
+ ypo = ype + (ysci / 64);
+
+ } else {
+ yacm = 1;
+
+ /* calculate scaling increment */
+ ysci = (((10 * 1024 * (in_y - out_y - 1)) / in_y) + 9) / 10;
+
+ /* calculate ype and ypo */
+ ypo = ype = ((ysci + 15) / 16);
+
+ /* the sequence length interval (yacl) has to be set according
+ to the prescale value, e.g. [n .. 1/2) : 0
+ [1/2 .. 1/3) : 1
+ [1/3 .. 1/4) : 2
+ ... */
+ if ( ysci < 512) {
+ yacl = 0;
+ } else {
+ yacl = ( ysci / (1024 - ysci) );
+ }
+
+ /* get filter coefficients for cya, cyb from table hps_v_coeff_tab */
+ cya_cyb = hps_v_coeff_tab[ (yacl < 63 ? yacl : 63 ) ].hps_coeff;
+
+ /* get best match in the table of attenuations for vertical scaling */
+ v_atten = hps_v_coeff_tab[ (yacl < 63 ? yacl : 63 ) ].weight_sum;
+
+ for (i = 0; v_attenuation[i] != 0; i++) {
+ if (v_attenuation[i] >= v_atten)
+ break;
+ }
+
+ dcgy = i;
+ }
+
+ /* ypo and ype swapped in spec ? */
+ *hps_v_scale |= (yacm << 31) | (ysci << 21) | (yacl << 15) | (ypo << 8 ) | (ype << 1);
+
+ *hps_v_gain &= ~(MASK_W0|MASK_B2);
+ *hps_v_gain |= (dcgy << 16) | (cya_cyb << 0);
+
+ return 0;
+}
+
+/* simple bubble-sort algorithm with duplicate elimination */
+static int sort_and_eliminate(u32* values, int* count)
+{
+ int low = 0, high = 0, top = 0, temp = 0;
+ int cur = 0, next = 0;
+
+ /* sanity checks */
+ if( (0 > *count) || (NULL == values) ) {
+ return -EINVAL;
+ }
+
+ /* bubble sort the first @count items of the array @values */
+ for( top = *count; top > 0; top--) {
+ for( low = 0, high = 1; high < top; low++, high++) {
+ if( values[low] > values[high] ) {
+ temp = values[low];
+ values[low] = values[high];
+ values[high] = temp;
+ }
+ }
+ }
+
+ /* remove duplicate items */
+ for( cur = 0, next = 1; next < *count; next++) {
+ if( values[cur] != values[next])
+ values[++cur] = values[next];
+ }
+
+ *count = cur + 1;
+
+ return 0;
+}
+
+static void calculate_clipping_registers_rect(struct saa7146_dev *dev, struct saa7146_fh *fh,
+ struct saa7146_video_dma *vdma2, u32* clip_format, u32* arbtr_ctrl, enum v4l2_field field)
+{
+ struct saa7146_vv *vv = dev->vv_data;
+ __le32 *clipping = vv->d_clipping.cpu_addr;
+
+ int width = vv->ov.win.w.width;
+ int height = vv->ov.win.w.height;
+ int clipcount = vv->ov.nclips;
+
+ u32 line_list[32];
+ u32 pixel_list[32];
+ int numdwords = 0;
+
+ int i = 0, j = 0;
+ int cnt_line = 0, cnt_pixel = 0;
+
+ int x[32], y[32], w[32], h[32];
+
+ /* clear out memory */
+ memset(&line_list[0], 0x00, sizeof(u32)*32);
+ memset(&pixel_list[0], 0x00, sizeof(u32)*32);
+ memset(clipping, 0x00, SAA7146_CLIPPING_MEM);
+
+ /* fill the line and pixel-lists */
+ for(i = 0; i < clipcount; i++) {
+ int l = 0, r = 0, t = 0, b = 0;
+
+ x[i] = vv->ov.clips[i].c.left;
+ y[i] = vv->ov.clips[i].c.top;
+ w[i] = vv->ov.clips[i].c.width;
+ h[i] = vv->ov.clips[i].c.height;
+
+ if( w[i] < 0) {
+ x[i] += w[i]; w[i] = -w[i];
+ }
+ if( h[i] < 0) {
+ y[i] += h[i]; h[i] = -h[i];
+ }
+ if( x[i] < 0) {
+ w[i] += x[i]; x[i] = 0;
+ }
+ if( y[i] < 0) {
+ h[i] += y[i]; y[i] = 0;
+ }
+ if( 0 != vv->vflip ) {
+ y[i] = height - y[i] - h[i];
+ }
+
+ l = x[i];
+ r = x[i]+w[i];
+ t = y[i];
+ b = y[i]+h[i];
+
+ /* insert left/right coordinates */
+ pixel_list[ 2*i ] = min_t(int, l, width);
+ pixel_list[(2*i)+1] = min_t(int, r, width);
+ /* insert top/bottom coordinates */
+ line_list[ 2*i ] = min_t(int, t, height);
+ line_list[(2*i)+1] = min_t(int, b, height);
+ }
+
+ /* sort and eliminate lists */
+ cnt_line = cnt_pixel = 2*clipcount;
+ sort_and_eliminate( &pixel_list[0], &cnt_pixel );
+ sort_and_eliminate( &line_list[0], &cnt_line );
+
+ /* calculate the number of used u32s */
+ numdwords = max_t(int, (cnt_line+1), (cnt_pixel+1))*2;
+ numdwords = max_t(int, 4, numdwords);
+ numdwords = min_t(int, 64, numdwords);
+
+ /* fill up cliptable */
+ for(i = 0; i < cnt_pixel; i++) {
+ clipping[2*i] |= cpu_to_le32(pixel_list[i] << 16);
+ }
+ for(i = 0; i < cnt_line; i++) {
+ clipping[(2*i)+1] |= cpu_to_le32(line_list[i] << 16);
+ }
+
+ /* fill up cliptable with the display infos */
+ for(j = 0; j < clipcount; j++) {
+
+ for(i = 0; i < cnt_pixel; i++) {
+
+ if( x[j] < 0)
+ x[j] = 0;
+
+ if( pixel_list[i] < (x[j] + w[j])) {
+
+ if ( pixel_list[i] >= x[j] ) {
+ clipping[2*i] |= cpu_to_le32(1 << j);
+ }
+ }
+ }
+ for(i = 0; i < cnt_line; i++) {
+
+ if( y[j] < 0)
+ y[j] = 0;
+
+ if( line_list[i] < (y[j] + h[j]) ) {
+
+ if( line_list[i] >= y[j] ) {
+ clipping[(2*i)+1] |= cpu_to_le32(1 << j);
+ }
+ }
+ }
+ }
+
+ /* adjust arbitration control register */
+ *arbtr_ctrl &= 0xffff00ff;
+ *arbtr_ctrl |= 0x00001c00;
+
+ vdma2->base_even = vv->d_clipping.dma_handle;
+ vdma2->base_odd = vv->d_clipping.dma_handle;
+ vdma2->prot_addr = vv->d_clipping.dma_handle+((sizeof(u32))*(numdwords));
+ vdma2->base_page = 0x04;
+ vdma2->pitch = 0x00;
+ vdma2->num_line_byte = (0 << 16 | (sizeof(u32))*(numdwords-1) );
+
+ /* set clipping-mode. this depends on the field(s) used */
+ *clip_format &= 0xfffffff7;
+ if (V4L2_FIELD_HAS_BOTH(field)) {
+ *clip_format |= 0x00000008;
+ } else {
+ *clip_format |= 0x00000000;
+ }
+}
+
+/* disable clipping */
+static void saa7146_disable_clipping(struct saa7146_dev *dev)
+{
+ u32 clip_format = saa7146_read(dev, CLIP_FORMAT_CTRL);
+
+ /* mask out relevant bits (=lower word)*/
+ clip_format &= MASK_W1;
+
+ /* upload clipping-registers*/
+ saa7146_write(dev, CLIP_FORMAT_CTRL,clip_format);
+ saa7146_write(dev, MC2, (MASK_05 | MASK_21));
+
+ /* disable video dma2 */
+ saa7146_write(dev, MC1, MASK_21);
+}
+
+static void saa7146_set_clipping_rect(struct saa7146_fh *fh)
+{
+ struct saa7146_dev *dev = fh->dev;
+ struct saa7146_vv *vv = dev->vv_data;
+ enum v4l2_field field = vv->ov.win.field;
+ struct saa7146_video_dma vdma2;
+ u32 clip_format;
+ u32 arbtr_ctrl;
+
+ /* check clipcount, disable clipping if clipcount == 0*/
+ if (vv->ov.nclips == 0) {
+ saa7146_disable_clipping(dev);
+ return;
+ }
+
+ clip_format = saa7146_read(dev, CLIP_FORMAT_CTRL);
+ arbtr_ctrl = saa7146_read(dev, PCI_BT_V1);
+
+ calculate_clipping_registers_rect(dev, fh, &vdma2, &clip_format, &arbtr_ctrl, field);
+
+ /* set clipping format */
+ clip_format &= 0xffff0008;
+ clip_format |= (SAA7146_CLIPPING_RECT << 4);
+
+ /* prepare video dma2 */
+ saa7146_write(dev, BASE_EVEN2, vdma2.base_even);
+ saa7146_write(dev, BASE_ODD2, vdma2.base_odd);
+ saa7146_write(dev, PROT_ADDR2, vdma2.prot_addr);
+ saa7146_write(dev, BASE_PAGE2, vdma2.base_page);
+ saa7146_write(dev, PITCH2, vdma2.pitch);
+ saa7146_write(dev, NUM_LINE_BYTE2, vdma2.num_line_byte);
+
+ /* prepare the rest */
+ saa7146_write(dev, CLIP_FORMAT_CTRL,clip_format);
+ saa7146_write(dev, PCI_BT_V1, arbtr_ctrl);
+
+ /* upload clip_control-register, clipping-registers, enable video dma2 */
+ saa7146_write(dev, MC2, (MASK_05 | MASK_21 | MASK_03 | MASK_19));
+ saa7146_write(dev, MC1, (MASK_05 | MASK_21));
+}
+
+static void saa7146_set_window(struct saa7146_dev *dev, int width, int height, enum v4l2_field field)
+{
+ struct saa7146_vv *vv = dev->vv_data;
+
+ int source = vv->current_hps_source;
+ int sync = vv->current_hps_sync;
+
+ u32 hps_v_scale = 0, hps_v_gain = 0, hps_ctrl = 0, hps_h_prescale = 0, hps_h_scale = 0;
+
+ /* set vertical scale */
+ hps_v_scale = 0; /* all bits get set by the function-call */
+ hps_v_gain = 0; /* fixme: saa7146_read(dev, HPS_V_GAIN);*/
+ calculate_v_scale_registers(dev, field, vv->standard->v_field*2, height, &hps_v_scale, &hps_v_gain);
+
+ /* set horizontal scale */
+ hps_ctrl = 0;
+ hps_h_prescale = 0; /* all bits get set in the function */
+ hps_h_scale = 0;
+ calculate_h_scale_registers(dev, vv->standard->h_pixels, width, vv->hflip, &hps_ctrl, &hps_v_gain, &hps_h_prescale, &hps_h_scale);
+
+ /* set hyo and hxo */
+ calculate_hxo_and_hyo(vv, &hps_h_scale, &hps_ctrl);
+ calculate_hps_source_and_sync(dev, source, sync, &hps_ctrl);
+
+ /* write out new register contents */
+ saa7146_write(dev, HPS_V_SCALE, hps_v_scale);
+ saa7146_write(dev, HPS_V_GAIN, hps_v_gain);
+ saa7146_write(dev, HPS_CTRL, hps_ctrl);
+ saa7146_write(dev, HPS_H_PRESCALE,hps_h_prescale);
+ saa7146_write(dev, HPS_H_SCALE, hps_h_scale);
+
+ /* upload shadow-ram registers */
+ saa7146_write(dev, MC2, (MASK_05 | MASK_06 | MASK_21 | MASK_22) );
+}
+
+/* calculate the new memory offsets for a desired position */
+static void saa7146_set_position(struct saa7146_dev *dev, int w_x, int w_y, int w_height, enum v4l2_field field, u32 pixelformat)
+{
+ struct saa7146_vv *vv = dev->vv_data;
+ struct saa7146_format *sfmt = saa7146_format_by_fourcc(dev, pixelformat);
+
+ int b_depth = vv->ov_fmt->depth;
+ int b_bpl = vv->ov_fb.fmt.bytesperline;
+ /* The unsigned long cast is to remove a 64-bit compile warning since
+ it looks like a 64-bit address is cast to a 32-bit value, even
+ though the base pointer is really a 32-bit physical address that
+ goes into a 32-bit DMA register.
+ FIXME: might not work on some 64-bit platforms, but see the FIXME
+ in struct v4l2_framebuffer (videodev2.h) for that.
+ */
+ u32 base = (u32)(unsigned long)vv->ov_fb.base;
+
+ struct saa7146_video_dma vdma1;
+
+ /* calculate memory offsets for picture, look if we shall top-down-flip */
+ vdma1.pitch = 2*b_bpl;
+ if ( 0 == vv->vflip ) {
+ vdma1.base_even = base + (w_y * (vdma1.pitch/2)) + (w_x * (b_depth / 8));
+ vdma1.base_odd = vdma1.base_even + (vdma1.pitch / 2);
+ vdma1.prot_addr = vdma1.base_even + (w_height * (vdma1.pitch / 2));
+ }
+ else {
+ vdma1.base_even = base + ((w_y+w_height) * (vdma1.pitch/2)) + (w_x * (b_depth / 8));
+ vdma1.base_odd = vdma1.base_even - (vdma1.pitch / 2);
+ vdma1.prot_addr = vdma1.base_odd - (w_height * (vdma1.pitch / 2));
+ }
+
+ if (V4L2_FIELD_HAS_BOTH(field)) {
+ } else if (field == V4L2_FIELD_ALTERNATE) {
+ /* fixme */
+ vdma1.base_odd = vdma1.prot_addr;
+ vdma1.pitch /= 2;
+ } else if (field == V4L2_FIELD_TOP) {
+ vdma1.base_odd = vdma1.prot_addr;
+ vdma1.pitch /= 2;
+ } else if (field == V4L2_FIELD_BOTTOM) {
+ vdma1.base_odd = vdma1.base_even;
+ vdma1.base_even = vdma1.prot_addr;
+ vdma1.pitch /= 2;
+ }
+
+ if ( 0 != vv->vflip ) {
+ vdma1.pitch *= -1;
+ }
+
+ vdma1.base_page = sfmt->swap;
+ vdma1.num_line_byte = (vv->standard->v_field<<16)+vv->standard->h_pixels;
+
+ saa7146_write_out_dma(dev, 1, &vdma1);
+}
+
+static void saa7146_set_output_format(struct saa7146_dev *dev, unsigned long palette)
+{
+ u32 clip_format = saa7146_read(dev, CLIP_FORMAT_CTRL);
+
+ /* call helper function */
+ calculate_output_format_register(dev,palette,&clip_format);
+
+ /* update the hps registers */
+ saa7146_write(dev, CLIP_FORMAT_CTRL, clip_format);
+ saa7146_write(dev, MC2, (MASK_05 | MASK_21));
+}
+
+/* select input-source */
+void saa7146_set_hps_source_and_sync(struct saa7146_dev *dev, int source, int sync)
+{
+ struct saa7146_vv *vv = dev->vv_data;
+ u32 hps_ctrl = 0;
+
+ /* read old state */
+ hps_ctrl = saa7146_read(dev, HPS_CTRL);
+
+ hps_ctrl &= ~( MASK_31 | MASK_30 | MASK_28 );
+ hps_ctrl |= (source << 30) | (sync << 28);
+
+ /* write back & upload register */
+ saa7146_write(dev, HPS_CTRL, hps_ctrl);
+ saa7146_write(dev, MC2, (MASK_05 | MASK_21));
+
+ vv->current_hps_source = source;
+ vv->current_hps_sync = sync;
+}
+EXPORT_SYMBOL_GPL(saa7146_set_hps_source_and_sync);
+
+int saa7146_enable_overlay(struct saa7146_fh *fh)
+{
+ struct saa7146_dev *dev = fh->dev;
+ struct saa7146_vv *vv = dev->vv_data;
+
+ saa7146_set_window(dev, vv->ov.win.w.width, vv->ov.win.w.height, vv->ov.win.field);
+ saa7146_set_position(dev, vv->ov.win.w.left, vv->ov.win.w.top, vv->ov.win.w.height, vv->ov.win.field, vv->ov_fmt->pixelformat);
+ saa7146_set_output_format(dev, vv->ov_fmt->trans);
+ saa7146_set_clipping_rect(fh);
+
+ /* enable video dma1 */
+ saa7146_write(dev, MC1, (MASK_06 | MASK_22));
+ return 0;
+}
+
+void saa7146_disable_overlay(struct saa7146_fh *fh)
+{
+ struct saa7146_dev *dev = fh->dev;
+
+ /* disable clipping + video dma1 */
+ saa7146_disable_clipping(dev);
+ saa7146_write(dev, MC1, MASK_22);
+}
+
+void saa7146_write_out_dma(struct saa7146_dev* dev, int which, struct saa7146_video_dma* vdma)
+{
+ int where = 0;
+
+ if( which < 1 || which > 3) {
+ return;
+ }
+
+ /* calculate starting address */
+ where = (which-1)*0x18;
+
+ saa7146_write(dev, where, vdma->base_odd);
+ saa7146_write(dev, where+0x04, vdma->base_even);
+ saa7146_write(dev, where+0x08, vdma->prot_addr);
+ saa7146_write(dev, where+0x0c, vdma->pitch);
+ saa7146_write(dev, where+0x10, vdma->base_page);
+ saa7146_write(dev, where+0x14, vdma->num_line_byte);
+
+ /* upload */
+ saa7146_write(dev, MC2, (MASK_02<<(which-1))|(MASK_18<<(which-1)));
+/*
+ printk("vdma%d.base_even: 0x%08x\n", which,vdma->base_even);
+ printk("vdma%d.base_odd: 0x%08x\n", which,vdma->base_odd);
+ printk("vdma%d.prot_addr: 0x%08x\n", which,vdma->prot_addr);
+ printk("vdma%d.base_page: 0x%08x\n", which,vdma->base_page);
+ printk("vdma%d.pitch: 0x%08x\n", which,vdma->pitch);
+ printk("vdma%d.num_line_byte: 0x%08x\n", which,vdma->num_line_byte);
+*/
+}
+
+static int calculate_video_dma_grab_packed(struct saa7146_dev* dev, struct saa7146_buf *buf)
+{
+ struct saa7146_vv *vv = dev->vv_data;
+ struct saa7146_video_dma vdma1;
+
+ struct saa7146_format *sfmt = saa7146_format_by_fourcc(dev,buf->fmt->pixelformat);
+
+ int width = buf->fmt->width;
+ int height = buf->fmt->height;
+ int bytesperline = buf->fmt->bytesperline;
+ enum v4l2_field field = buf->fmt->field;
+
+ int depth = sfmt->depth;
+
+ DEB_CAP("[size=%dx%d,fields=%s]\n",
+ width, height, v4l2_field_names[field]);
+
+ if( bytesperline != 0) {
+ vdma1.pitch = bytesperline*2;
+ } else {
+ vdma1.pitch = (width*depth*2)/8;
+ }
+ vdma1.num_line_byte = ((vv->standard->v_field<<16) + vv->standard->h_pixels);
+ vdma1.base_page = buf->pt[0].dma | ME1 | sfmt->swap;
+
+ if( 0 != vv->vflip ) {
+ vdma1.prot_addr = buf->pt[0].offset;
+ vdma1.base_even = buf->pt[0].offset+(vdma1.pitch/2)*height;
+ vdma1.base_odd = vdma1.base_even - (vdma1.pitch/2);
+ } else {
+ vdma1.base_even = buf->pt[0].offset;
+ vdma1.base_odd = vdma1.base_even + (vdma1.pitch/2);
+ vdma1.prot_addr = buf->pt[0].offset+(vdma1.pitch/2)*height;
+ }
+
+ if (V4L2_FIELD_HAS_BOTH(field)) {
+ } else if (field == V4L2_FIELD_ALTERNATE) {
+ /* fixme */
+ if ( vv->last_field == V4L2_FIELD_TOP ) {
+ vdma1.base_odd = vdma1.prot_addr;
+ vdma1.pitch /= 2;
+ } else if ( vv->last_field == V4L2_FIELD_BOTTOM ) {
+ vdma1.base_odd = vdma1.base_even;
+ vdma1.base_even = vdma1.prot_addr;
+ vdma1.pitch /= 2;
+ }
+ } else if (field == V4L2_FIELD_TOP) {
+ vdma1.base_odd = vdma1.prot_addr;
+ vdma1.pitch /= 2;
+ } else if (field == V4L2_FIELD_BOTTOM) {
+ vdma1.base_odd = vdma1.base_even;
+ vdma1.base_even = vdma1.prot_addr;
+ vdma1.pitch /= 2;
+ }
+
+ if( 0 != vv->vflip ) {
+ vdma1.pitch *= -1;
+ }
+
+ saa7146_write_out_dma(dev, 1, &vdma1);
+ return 0;
+}
+
+static int calc_planar_422(struct saa7146_vv *vv, struct saa7146_buf *buf, struct saa7146_video_dma *vdma2, struct saa7146_video_dma *vdma3)
+{
+ int height = buf->fmt->height;
+ int width = buf->fmt->width;
+
+ vdma2->pitch = width;
+ vdma3->pitch = width;
+
+ /* fixme: look at bytesperline! */
+
+ if( 0 != vv->vflip ) {
+ vdma2->prot_addr = buf->pt[1].offset;
+ vdma2->base_even = ((vdma2->pitch/2)*height)+buf->pt[1].offset;
+ vdma2->base_odd = vdma2->base_even - (vdma2->pitch/2);
+
+ vdma3->prot_addr = buf->pt[2].offset;
+ vdma3->base_even = ((vdma3->pitch/2)*height)+buf->pt[2].offset;
+ vdma3->base_odd = vdma3->base_even - (vdma3->pitch/2);
+ } else {
+ vdma3->base_even = buf->pt[2].offset;
+ vdma3->base_odd = vdma3->base_even + (vdma3->pitch/2);
+ vdma3->prot_addr = (vdma3->pitch/2)*height+buf->pt[2].offset;
+
+ vdma2->base_even = buf->pt[1].offset;
+ vdma2->base_odd = vdma2->base_even + (vdma2->pitch/2);
+ vdma2->prot_addr = (vdma2->pitch/2)*height+buf->pt[1].offset;
+ }
+
+ return 0;
+}
+
+static int calc_planar_420(struct saa7146_vv *vv, struct saa7146_buf *buf, struct saa7146_video_dma *vdma2, struct saa7146_video_dma *vdma3)
+{
+ int height = buf->fmt->height;
+ int width = buf->fmt->width;
+
+ vdma2->pitch = width/2;
+ vdma3->pitch = width/2;
+
+ if( 0 != vv->vflip ) {
+ vdma2->prot_addr = buf->pt[2].offset;
+ vdma2->base_even = ((vdma2->pitch/2)*height)+buf->pt[2].offset;
+ vdma2->base_odd = vdma2->base_even - (vdma2->pitch/2);
+
+ vdma3->prot_addr = buf->pt[1].offset;
+ vdma3->base_even = ((vdma3->pitch/2)*height)+buf->pt[1].offset;
+ vdma3->base_odd = vdma3->base_even - (vdma3->pitch/2);
+
+ } else {
+ vdma3->base_even = buf->pt[2].offset;
+ vdma3->base_odd = vdma3->base_even + (vdma3->pitch);
+ vdma3->prot_addr = (vdma3->pitch/2)*height+buf->pt[2].offset;
+
+ vdma2->base_even = buf->pt[1].offset;
+ vdma2->base_odd = vdma2->base_even + (vdma2->pitch);
+ vdma2->prot_addr = (vdma2->pitch/2)*height+buf->pt[1].offset;
+ }
+ return 0;
+}
+
+static int calculate_video_dma_grab_planar(struct saa7146_dev* dev, struct saa7146_buf *buf)
+{
+ struct saa7146_vv *vv = dev->vv_data;
+ struct saa7146_video_dma vdma1;
+ struct saa7146_video_dma vdma2;
+ struct saa7146_video_dma vdma3;
+
+ struct saa7146_format *sfmt = saa7146_format_by_fourcc(dev,buf->fmt->pixelformat);
+
+ int width = buf->fmt->width;
+ int height = buf->fmt->height;
+ enum v4l2_field field = buf->fmt->field;
+
+ BUG_ON(0 == buf->pt[0].dma);
+ BUG_ON(0 == buf->pt[1].dma);
+ BUG_ON(0 == buf->pt[2].dma);
+
+ DEB_CAP("[size=%dx%d,fields=%s]\n",
+ width, height, v4l2_field_names[field]);
+
+ /* fixme: look at bytesperline! */
+
+ /* fixme: what happens for user space buffers here?. The offsets are
+ most likely wrong, this version here only works for page-aligned
+ buffers, modifications to the pagetable-functions are necessary...*/
+
+ vdma1.pitch = width*2;
+ vdma1.num_line_byte = ((vv->standard->v_field<<16) + vv->standard->h_pixels);
+ vdma1.base_page = buf->pt[0].dma | ME1;
+
+ if( 0 != vv->vflip ) {
+ vdma1.prot_addr = buf->pt[0].offset;
+ vdma1.base_even = ((vdma1.pitch/2)*height)+buf->pt[0].offset;
+ vdma1.base_odd = vdma1.base_even - (vdma1.pitch/2);
+ } else {
+ vdma1.base_even = buf->pt[0].offset;
+ vdma1.base_odd = vdma1.base_even + (vdma1.pitch/2);
+ vdma1.prot_addr = (vdma1.pitch/2)*height+buf->pt[0].offset;
+ }
+
+ vdma2.num_line_byte = 0; /* unused */
+ vdma2.base_page = buf->pt[1].dma | ME1;
+
+ vdma3.num_line_byte = 0; /* unused */
+ vdma3.base_page = buf->pt[2].dma | ME1;
+
+ switch( sfmt->depth ) {
+ case 12: {
+ calc_planar_420(vv,buf,&vdma2,&vdma3);
+ break;
+ }
+ case 16: {
+ calc_planar_422(vv,buf,&vdma2,&vdma3);
+ break;
+ }
+ default: {
+ return -1;
+ }
+ }
+
+ if (V4L2_FIELD_HAS_BOTH(field)) {
+ } else if (field == V4L2_FIELD_ALTERNATE) {
+ /* fixme */
+ vdma1.base_odd = vdma1.prot_addr;
+ vdma1.pitch /= 2;
+ vdma2.base_odd = vdma2.prot_addr;
+ vdma2.pitch /= 2;
+ vdma3.base_odd = vdma3.prot_addr;
+ vdma3.pitch /= 2;
+ } else if (field == V4L2_FIELD_TOP) {
+ vdma1.base_odd = vdma1.prot_addr;
+ vdma1.pitch /= 2;
+ vdma2.base_odd = vdma2.prot_addr;
+ vdma2.pitch /= 2;
+ vdma3.base_odd = vdma3.prot_addr;
+ vdma3.pitch /= 2;
+ } else if (field == V4L2_FIELD_BOTTOM) {
+ vdma1.base_odd = vdma1.base_even;
+ vdma1.base_even = vdma1.prot_addr;
+ vdma1.pitch /= 2;
+ vdma2.base_odd = vdma2.base_even;
+ vdma2.base_even = vdma2.prot_addr;
+ vdma2.pitch /= 2;
+ vdma3.base_odd = vdma3.base_even;
+ vdma3.base_even = vdma3.prot_addr;
+ vdma3.pitch /= 2;
+ }
+
+ if( 0 != vv->vflip ) {
+ vdma1.pitch *= -1;
+ vdma2.pitch *= -1;
+ vdma3.pitch *= -1;
+ }
+
+ saa7146_write_out_dma(dev, 1, &vdma1);
+ if( (sfmt->flags & FORMAT_BYTE_SWAP) != 0 ) {
+ saa7146_write_out_dma(dev, 3, &vdma2);
+ saa7146_write_out_dma(dev, 2, &vdma3);
+ } else {
+ saa7146_write_out_dma(dev, 2, &vdma2);
+ saa7146_write_out_dma(dev, 3, &vdma3);
+ }
+ return 0;
+}
+
+static void program_capture_engine(struct saa7146_dev *dev, int planar)
+{
+ struct saa7146_vv *vv = dev->vv_data;
+ int count = 0;
+
+ unsigned long e_wait = vv->current_hps_sync == SAA7146_HPS_SYNC_PORT_A ? CMD_E_FID_A : CMD_E_FID_B;
+ unsigned long o_wait = vv->current_hps_sync == SAA7146_HPS_SYNC_PORT_A ? CMD_O_FID_A : CMD_O_FID_B;
+
+ /* wait for o_fid_a/b / e_fid_a/b toggle only if rps register 0 is not set*/
+ WRITE_RPS0(CMD_PAUSE | CMD_OAN | CMD_SIG0 | o_wait);
+ WRITE_RPS0(CMD_PAUSE | CMD_OAN | CMD_SIG0 | e_wait);
+
+ /* set rps register 0 */
+ WRITE_RPS0(CMD_WR_REG | (1 << 8) | (MC2/4));
+ WRITE_RPS0(MASK_27 | MASK_11);
+
+ /* turn on video-dma1 */
+ WRITE_RPS0(CMD_WR_REG_MASK | (MC1/4));
+ WRITE_RPS0(MASK_06 | MASK_22); /* => mask */
+ WRITE_RPS0(MASK_06 | MASK_22); /* => values */
+ if( 0 != planar ) {
+ /* turn on video-dma2 */
+ WRITE_RPS0(CMD_WR_REG_MASK | (MC1/4));
+ WRITE_RPS0(MASK_05 | MASK_21); /* => mask */
+ WRITE_RPS0(MASK_05 | MASK_21); /* => values */
+
+ /* turn on video-dma3 */
+ WRITE_RPS0(CMD_WR_REG_MASK | (MC1/4));
+ WRITE_RPS0(MASK_04 | MASK_20); /* => mask */
+ WRITE_RPS0(MASK_04 | MASK_20); /* => values */
+ }
+
+ /* wait for o_fid_a/b / e_fid_a/b toggle */
+ if ( vv->last_field == V4L2_FIELD_INTERLACED ) {
+ WRITE_RPS0(CMD_PAUSE | o_wait);
+ WRITE_RPS0(CMD_PAUSE | e_wait);
+ } else if ( vv->last_field == V4L2_FIELD_TOP ) {
+ WRITE_RPS0(CMD_PAUSE | (vv->current_hps_sync == SAA7146_HPS_SYNC_PORT_A ? MASK_10 : MASK_09));
+ WRITE_RPS0(CMD_PAUSE | o_wait);
+ } else if ( vv->last_field == V4L2_FIELD_BOTTOM ) {
+ WRITE_RPS0(CMD_PAUSE | (vv->current_hps_sync == SAA7146_HPS_SYNC_PORT_A ? MASK_10 : MASK_09));
+ WRITE_RPS0(CMD_PAUSE | e_wait);
+ }
+
+ /* turn off video-dma1 */
+ WRITE_RPS0(CMD_WR_REG_MASK | (MC1/4));
+ WRITE_RPS0(MASK_22 | MASK_06); /* => mask */
+ WRITE_RPS0(MASK_22); /* => values */
+ if( 0 != planar ) {
+ /* turn off video-dma2 */
+ WRITE_RPS0(CMD_WR_REG_MASK | (MC1/4));
+ WRITE_RPS0(MASK_05 | MASK_21); /* => mask */
+ WRITE_RPS0(MASK_21); /* => values */
+
+ /* turn off video-dma3 */
+ WRITE_RPS0(CMD_WR_REG_MASK | (MC1/4));
+ WRITE_RPS0(MASK_04 | MASK_20); /* => mask */
+ WRITE_RPS0(MASK_20); /* => values */
+ }
+
+ /* generate interrupt */
+ WRITE_RPS0(CMD_INTERRUPT);
+
+ /* stop */
+ WRITE_RPS0(CMD_STOP);
+}
+
+void saa7146_set_capture(struct saa7146_dev *dev, struct saa7146_buf *buf, struct saa7146_buf *next)
+{
+ struct saa7146_format *sfmt = saa7146_format_by_fourcc(dev,buf->fmt->pixelformat);
+ struct saa7146_vv *vv = dev->vv_data;
+ u32 vdma1_prot_addr;
+
+ DEB_CAP("buf:%p, next:%p\n", buf, next);
+
+ vdma1_prot_addr = saa7146_read(dev, PROT_ADDR1);
+ if( 0 == vdma1_prot_addr ) {
+ /* clear out beginning of streaming bit (rps register 0)*/
+ DEB_CAP("forcing sync to new frame\n");
+ saa7146_write(dev, MC2, MASK_27 );
+ }
+
+ saa7146_set_window(dev, buf->fmt->width, buf->fmt->height, buf->fmt->field);
+ saa7146_set_output_format(dev, sfmt->trans);
+ saa7146_disable_clipping(dev);
+
+ if ( vv->last_field == V4L2_FIELD_INTERLACED ) {
+ } else if ( vv->last_field == V4L2_FIELD_TOP ) {
+ vv->last_field = V4L2_FIELD_BOTTOM;
+ } else if ( vv->last_field == V4L2_FIELD_BOTTOM ) {
+ vv->last_field = V4L2_FIELD_TOP;
+ }
+
+ if( 0 != IS_PLANAR(sfmt->trans)) {
+ calculate_video_dma_grab_planar(dev, buf);
+ program_capture_engine(dev,1);
+ } else {
+ calculate_video_dma_grab_packed(dev, buf);
+ program_capture_engine(dev,0);
+ }
+
+/*
+ printk("vdma%d.base_even: 0x%08x\n", 1,saa7146_read(dev,BASE_EVEN1));
+ printk("vdma%d.base_odd: 0x%08x\n", 1,saa7146_read(dev,BASE_ODD1));
+ printk("vdma%d.prot_addr: 0x%08x\n", 1,saa7146_read(dev,PROT_ADDR1));
+ printk("vdma%d.base_page: 0x%08x\n", 1,saa7146_read(dev,BASE_PAGE1));
+ printk("vdma%d.pitch: 0x%08x\n", 1,saa7146_read(dev,PITCH1));
+ printk("vdma%d.num_line_byte: 0x%08x\n", 1,saa7146_read(dev,NUM_LINE_BYTE1));
+ printk("vdma%d => vptr : 0x%08x\n", 1,saa7146_read(dev,PCI_VDP1));
+*/
+
+ /* write the address of the rps-program */
+ saa7146_write(dev, RPS_ADDR0, dev->d_rps0.dma_handle);
+
+ /* turn on rps */
+ saa7146_write(dev, MC1, (MASK_12 | MASK_28));
+}
diff --git a/kernel/drivers/media/common/saa7146/saa7146_i2c.c b/kernel/drivers/media/common/saa7146/saa7146_i2c.c
new file mode 100644
index 000000000..220271981
--- /dev/null
+++ b/kernel/drivers/media/common/saa7146/saa7146_i2c.c
@@ -0,0 +1,423 @@
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <media/saa7146_vv.h>
+
+static u32 saa7146_i2c_func(struct i2c_adapter *adapter)
+{
+ /* DEB_I2C("'%s'\n", adapter->name); */
+
+ return I2C_FUNC_I2C
+ | I2C_FUNC_SMBUS_QUICK
+ | I2C_FUNC_SMBUS_READ_BYTE | I2C_FUNC_SMBUS_WRITE_BYTE
+ | I2C_FUNC_SMBUS_READ_BYTE_DATA | I2C_FUNC_SMBUS_WRITE_BYTE_DATA;
+}
+
+/* this function returns the status-register of our i2c-device */
+static inline u32 saa7146_i2c_status(struct saa7146_dev *dev)
+{
+ u32 iicsta = saa7146_read(dev, I2C_STATUS);
+ /* DEB_I2C("status: 0x%08x\n", iicsta); */
+ return iicsta;
+}
+
+/* this function runs through the i2c-messages and prepares the data to be
+ sent through the saa7146. have a look at the specifications p. 122 ff
+ to understand this. it returns the number of u32s to send, or -1
+ in case of an error. */
+static int saa7146_i2c_msg_prepare(const struct i2c_msg *m, int num, __le32 *op)
+{
+ int h1, h2;
+ int i, j, addr;
+ int mem = 0, op_count = 0;
+
+ /* first determine size of needed memory */
+ for(i = 0; i < num; i++) {
+ mem += m[i].len + 1;
+ }
+
+ /* worst case: we need one u32 for three bytes to be send
+ plus one extra byte to address the device */
+ mem = 1 + ((mem-1) / 3);
+
+ /* we assume that op points to a memory of at least
+ * SAA7146_I2C_MEM bytes size. if we exceed this limit...
+ */
+ if ((4 * mem) > SAA7146_I2C_MEM) {
+ /* DEB_I2C("cannot prepare i2c-message\n"); */
+ return -ENOMEM;
+ }
+
+ /* be careful: clear out the i2c-mem first */
+ memset(op,0,sizeof(__le32)*mem);
+
+ /* loop through all messages */
+ for(i = 0; i < num; i++) {
+
+ /* insert the address of the i2c-slave.
+ note: we get 7 bit i2c-addresses,
+ so we have to perform a translation */
+ addr = (m[i].addr*2) + ( (0 != (m[i].flags & I2C_M_RD)) ? 1 : 0);
+ h1 = op_count/3; h2 = op_count%3;
+ op[h1] |= cpu_to_le32( (u8)addr << ((3-h2)*8));
+ op[h1] |= cpu_to_le32(SAA7146_I2C_START << ((3-h2)*2));
+ op_count++;
+
+ /* loop through all bytes of message i */
+ for(j = 0; j < m[i].len; j++) {
+ /* insert the data bytes */
+ h1 = op_count/3; h2 = op_count%3;
+ op[h1] |= cpu_to_le32( (u32)((u8)m[i].buf[j]) << ((3-h2)*8));
+ op[h1] |= cpu_to_le32( SAA7146_I2C_CONT << ((3-h2)*2));
+ op_count++;
+ }
+
+ }
+
+ /* have a look at the last byte inserted:
+ if it was: ...CONT change it to ...STOP */
+ h1 = (op_count-1)/3; h2 = (op_count-1)%3;
+ if ( SAA7146_I2C_CONT == (0x3 & (le32_to_cpu(op[h1]) >> ((3-h2)*2))) ) {
+ op[h1] &= ~cpu_to_le32(0x2 << ((3-h2)*2));
+ op[h1] |= cpu_to_le32(SAA7146_I2C_STOP << ((3-h2)*2));
+ }
+
+ /* return the number of u32s to send */
+ return mem;
+}
+
+/* this functions loops through all i2c-messages. normally, it should determine
+ which bytes were read through the adapter and write them back to the corresponding
+ i2c-message. but instead, we simply write back all bytes.
+ fixme: this could be improved. */
+static int saa7146_i2c_msg_cleanup(const struct i2c_msg *m, int num, __le32 *op)
+{
+ int i, j;
+ int op_count = 0;
+
+ /* loop through all messages */
+ for(i = 0; i < num; i++) {
+
+ op_count++;
+
+ /* loop through all bytes of message i */
+ for(j = 0; j < m[i].len; j++) {
+ /* write back all bytes that could have been read */
+ m[i].buf[j] = (le32_to_cpu(op[op_count/3]) >> ((3-(op_count%3))*8));
+ op_count++;
+ }
+ }
+
+ return 0;
+}
+
+/* this functions resets the i2c-device and returns 0 if everything was fine, otherwise -1 */
+static int saa7146_i2c_reset(struct saa7146_dev *dev)
+{
+ /* get current status */
+ u32 status = saa7146_i2c_status(dev);
+
+ /* clear registers for sure */
+ saa7146_write(dev, I2C_STATUS, dev->i2c_bitrate);
+ saa7146_write(dev, I2C_TRANSFER, 0);
+
+ /* check if any operation is still in progress */
+ if ( 0 != ( status & SAA7146_I2C_BUSY) ) {
+
+ /* yes, kill ongoing operation */
+ DEB_I2C("busy_state detected\n");
+
+ /* set "ABORT-OPERATION"-bit (bit 7)*/
+ saa7146_write(dev, I2C_STATUS, (dev->i2c_bitrate | MASK_07));
+ saa7146_write(dev, MC2, (MASK_00 | MASK_16));
+ msleep(SAA7146_I2C_DELAY);
+
+ /* clear all error-bits pending; this is needed because p.123, note 1 */
+ saa7146_write(dev, I2C_STATUS, dev->i2c_bitrate);
+ saa7146_write(dev, MC2, (MASK_00 | MASK_16));
+ msleep(SAA7146_I2C_DELAY);
+ }
+
+ /* check if any error is (still) present. (this can be necessary because p.123, note 1) */
+ status = saa7146_i2c_status(dev);
+
+ if ( dev->i2c_bitrate != status ) {
+
+ DEB_I2C("error_state detected. status:0x%08x\n", status);
+
+ /* Repeat the abort operation. This seems to be necessary
+ after serious protocol errors caused by e.g. the SAA7740 */
+ saa7146_write(dev, I2C_STATUS, (dev->i2c_bitrate | MASK_07));
+ saa7146_write(dev, MC2, (MASK_00 | MASK_16));
+ msleep(SAA7146_I2C_DELAY);
+
+ /* clear all error-bits pending */
+ saa7146_write(dev, I2C_STATUS, dev->i2c_bitrate);
+ saa7146_write(dev, MC2, (MASK_00 | MASK_16));
+ msleep(SAA7146_I2C_DELAY);
+
+ /* the data sheet says it might be necessary to clear the status
+ twice after an abort */
+ saa7146_write(dev, I2C_STATUS, dev->i2c_bitrate);
+ saa7146_write(dev, MC2, (MASK_00 | MASK_16));
+ msleep(SAA7146_I2C_DELAY);
+ }
+
+ /* if any error is still present, a fatal error has occurred ... */
+ status = saa7146_i2c_status(dev);
+ if ( dev->i2c_bitrate != status ) {
+ DEB_I2C("fatal error. status:0x%08x\n", status);
+ return -1;
+ }
+
+ return 0;
+}
+
+/* this functions writes out the data-byte 'dword' to the i2c-device.
+ it returns 0 if ok, -1 if the transfer failed, -2 if the transfer
+ failed badly (e.g. address error) */
+static int saa7146_i2c_writeout(struct saa7146_dev *dev, __le32 *dword, int short_delay)
+{
+ u32 status = 0, mc2 = 0;
+ int trial = 0;
+ unsigned long timeout;
+
+ /* write out i2c-command */
+ DEB_I2C("before: 0x%08x (status: 0x%08x), %d\n",
+ *dword, saa7146_read(dev, I2C_STATUS), dev->i2c_op);
+
+ if( 0 != (SAA7146_USE_I2C_IRQ & dev->ext->flags)) {
+
+ saa7146_write(dev, I2C_STATUS, dev->i2c_bitrate);
+ saa7146_write(dev, I2C_TRANSFER, le32_to_cpu(*dword));
+
+ dev->i2c_op = 1;
+ SAA7146_ISR_CLEAR(dev, MASK_16|MASK_17);
+ SAA7146_IER_ENABLE(dev, MASK_16|MASK_17);
+ saa7146_write(dev, MC2, (MASK_00 | MASK_16));
+
+ timeout = HZ/100 + 1; /* 10ms */
+ timeout = wait_event_interruptible_timeout(dev->i2c_wq, dev->i2c_op == 0, timeout);
+ if (timeout == -ERESTARTSYS || dev->i2c_op) {
+ SAA7146_IER_DISABLE(dev, MASK_16|MASK_17);
+ SAA7146_ISR_CLEAR(dev, MASK_16|MASK_17);
+ if (timeout == -ERESTARTSYS)
+ /* a signal arrived */
+ return -ERESTARTSYS;
+
+ pr_warn("%s %s [irq]: timed out waiting for end of xfer\n",
+ dev->name, __func__);
+ return -EIO;
+ }
+ status = saa7146_read(dev, I2C_STATUS);
+ } else {
+ saa7146_write(dev, I2C_STATUS, dev->i2c_bitrate);
+ saa7146_write(dev, I2C_TRANSFER, le32_to_cpu(*dword));
+ saa7146_write(dev, MC2, (MASK_00 | MASK_16));
+
+ /* do not poll for i2c-status before upload is complete */
+ timeout = jiffies + HZ/100 + 1; /* 10ms */
+ while(1) {
+ mc2 = (saa7146_read(dev, MC2) & 0x1);
+ if( 0 != mc2 ) {
+ break;
+ }
+ if (time_after(jiffies,timeout)) {
+ pr_warn("%s %s: timed out waiting for MC2\n",
+ dev->name, __func__);
+ return -EIO;
+ }
+ }
+ /* wait until we get a transfer done or error */
+ timeout = jiffies + HZ/100 + 1; /* 10ms */
+ /* first read usually delivers bogus results... */
+ saa7146_i2c_status(dev);
+ while(1) {
+ status = saa7146_i2c_status(dev);
+ if ((status & 0x3) != 1)
+ break;
+ if (time_after(jiffies,timeout)) {
+ /* this is normal when probing the bus
+ * (no answer from nonexisistant device...)
+ */
+ pr_warn("%s %s [poll]: timed out waiting for end of xfer\n",
+ dev->name, __func__);
+ return -EIO;
+ }
+ if (++trial < 50 && short_delay)
+ udelay(10);
+ else
+ msleep(1);
+ }
+ }
+
+ /* give a detailed status report */
+ if ( 0 != (status & (SAA7146_I2C_SPERR | SAA7146_I2C_APERR |
+ SAA7146_I2C_DTERR | SAA7146_I2C_DRERR |
+ SAA7146_I2C_AL | SAA7146_I2C_ERR |
+ SAA7146_I2C_BUSY)) ) {
+
+ if ( 0 == (status & SAA7146_I2C_ERR) ||
+ 0 == (status & SAA7146_I2C_BUSY) ) {
+ /* it may take some time until ERR goes high - ignore */
+ DEB_I2C("unexpected i2c status %04x\n", status);
+ }
+ if( 0 != (status & SAA7146_I2C_SPERR) ) {
+ DEB_I2C("error due to invalid start/stop condition\n");
+ }
+ if( 0 != (status & SAA7146_I2C_DTERR) ) {
+ DEB_I2C("error in data transmission\n");
+ }
+ if( 0 != (status & SAA7146_I2C_DRERR) ) {
+ DEB_I2C("error when receiving data\n");
+ }
+ if( 0 != (status & SAA7146_I2C_AL) ) {
+ DEB_I2C("error because arbitration lost\n");
+ }
+
+ /* we handle address-errors here */
+ if( 0 != (status & SAA7146_I2C_APERR) ) {
+ DEB_I2C("error in address phase\n");
+ return -EREMOTEIO;
+ }
+
+ return -EIO;
+ }
+
+ /* read back data, just in case we were reading ... */
+ *dword = cpu_to_le32(saa7146_read(dev, I2C_TRANSFER));
+
+ DEB_I2C("after: 0x%08x\n", *dword);
+ return 0;
+}
+
+static int saa7146_i2c_transfer(struct saa7146_dev *dev, const struct i2c_msg *msgs, int num, int retries)
+{
+ int i = 0, count = 0;
+ __le32 *buffer = dev->d_i2c.cpu_addr;
+ int err = 0;
+ int short_delay = 0;
+
+ if (mutex_lock_interruptible(&dev->i2c_lock))
+ return -ERESTARTSYS;
+
+ for(i=0;i<num;i++) {
+ DEB_I2C("msg:%d/%d\n", i+1, num);
+ }
+
+ /* prepare the message(s), get number of u32s to transfer */
+ count = saa7146_i2c_msg_prepare(msgs, num, buffer);
+ if ( 0 > count ) {
+ err = -1;
+ goto out;
+ }
+
+ if ( count > 3 || 0 != (SAA7146_I2C_SHORT_DELAY & dev->ext->flags) )
+ short_delay = 1;
+
+ do {
+ /* reset the i2c-device if necessary */
+ err = saa7146_i2c_reset(dev);
+ if ( 0 > err ) {
+ DEB_I2C("could not reset i2c-device\n");
+ goto out;
+ }
+
+ /* write out the u32s one after another */
+ for(i = 0; i < count; i++) {
+ err = saa7146_i2c_writeout(dev, &buffer[i], short_delay);
+ if ( 0 != err) {
+ /* this one is unsatisfying: some i2c slaves on some
+ dvb cards don't acknowledge correctly, so the saa7146
+ thinks that an address error occurred. in that case, the
+ transaction should be retrying, even if an address error
+ occurred. analog saa7146 based cards extensively rely on
+ i2c address probing, however, and address errors indicate that a
+ device is really *not* there. retrying in that case
+ increases the time the device needs to probe greatly, so
+ it should be avoided. So we bail out in irq mode after an
+ address error and trust the saa7146 address error detection. */
+ if (-EREMOTEIO == err && 0 != (SAA7146_USE_I2C_IRQ & dev->ext->flags))
+ goto out;
+ DEB_I2C("error while sending message(s). starting again\n");
+ break;
+ }
+ }
+ if( 0 == err ) {
+ err = num;
+ break;
+ }
+
+ /* delay a bit before retrying */
+ msleep(10);
+
+ } while (err != num && retries--);
+
+ /* quit if any error occurred */
+ if (err != num)
+ goto out;
+
+ /* if any things had to be read, get the results */
+ if ( 0 != saa7146_i2c_msg_cleanup(msgs, num, buffer)) {
+ DEB_I2C("could not cleanup i2c-message\n");
+ err = -1;
+ goto out;
+ }
+
+ /* return the number of delivered messages */
+ DEB_I2C("transmission successful. (msg:%d)\n", err);
+out:
+ /* another bug in revision 0: the i2c-registers get uploaded randomly by other
+ uploads, so we better clear them out before continuing */
+ if( 0 == dev->revision ) {
+ __le32 zero = 0;
+ saa7146_i2c_reset(dev);
+ if( 0 != saa7146_i2c_writeout(dev, &zero, short_delay)) {
+ pr_info("revision 0 error. this should never happen\n");
+ }
+ }
+
+ mutex_unlock(&dev->i2c_lock);
+ return err;
+}
+
+/* utility functions */
+static int saa7146_i2c_xfer(struct i2c_adapter* adapter, struct i2c_msg *msg, int num)
+{
+ struct v4l2_device *v4l2_dev = i2c_get_adapdata(adapter);
+ struct saa7146_dev *dev = to_saa7146_dev(v4l2_dev);
+
+ /* use helper function to transfer data */
+ return saa7146_i2c_transfer(dev, msg, num, adapter->retries);
+}
+
+
+/*****************************************************************************/
+/* i2c-adapter helper functions */
+
+/* exported algorithm data */
+static struct i2c_algorithm saa7146_algo = {
+ .master_xfer = saa7146_i2c_xfer,
+ .functionality = saa7146_i2c_func,
+};
+
+int saa7146_i2c_adapter_prepare(struct saa7146_dev *dev, struct i2c_adapter *i2c_adapter, u32 bitrate)
+{
+ DEB_EE("bitrate: 0x%08x\n", bitrate);
+
+ /* enable i2c-port pins */
+ saa7146_write(dev, MC1, (MASK_08 | MASK_24));
+
+ dev->i2c_bitrate = bitrate;
+ saa7146_i2c_reset(dev);
+
+ if (i2c_adapter) {
+ i2c_set_adapdata(i2c_adapter, &dev->v4l2_dev);
+ i2c_adapter->dev.parent = &dev->pci->dev;
+ i2c_adapter->algo = &saa7146_algo;
+ i2c_adapter->algo_data = NULL;
+ i2c_adapter->timeout = SAA7146_I2C_TIMEOUT;
+ i2c_adapter->retries = SAA7146_I2C_RETRIES;
+ }
+
+ return 0;
+}
diff --git a/kernel/drivers/media/common/saa7146/saa7146_vbi.c b/kernel/drivers/media/common/saa7146/saa7146_vbi.c
new file mode 100644
index 000000000..2da995758
--- /dev/null
+++ b/kernel/drivers/media/common/saa7146/saa7146_vbi.c
@@ -0,0 +1,498 @@
+#include <media/saa7146_vv.h>
+
+static int vbi_pixel_to_capture = 720 * 2;
+
+static int vbi_workaround(struct saa7146_dev *dev)
+{
+ struct saa7146_vv *vv = dev->vv_data;
+
+ u32 *cpu;
+ dma_addr_t dma_addr;
+
+ int count = 0;
+ int i;
+
+ DECLARE_WAITQUEUE(wait, current);
+
+ DEB_VBI("dev:%p\n", dev);
+
+ /* once again, a bug in the saa7146: the brs acquisition
+ is buggy and especially the BXO-counter does not work
+ as specified. there is this workaround, but please
+ don't let me explain it. ;-) */
+
+ cpu = pci_alloc_consistent(dev->pci, 4096, &dma_addr);
+ if (NULL == cpu)
+ return -ENOMEM;
+
+ /* setup some basic programming, just for the workaround */
+ saa7146_write(dev, BASE_EVEN3, dma_addr);
+ saa7146_write(dev, BASE_ODD3, dma_addr+vbi_pixel_to_capture);
+ saa7146_write(dev, PROT_ADDR3, dma_addr+4096);
+ saa7146_write(dev, PITCH3, vbi_pixel_to_capture);
+ saa7146_write(dev, BASE_PAGE3, 0x0);
+ saa7146_write(dev, NUM_LINE_BYTE3, (2<<16)|((vbi_pixel_to_capture)<<0));
+ saa7146_write(dev, MC2, MASK_04|MASK_20);
+
+ /* load brs-control register */
+ WRITE_RPS1(CMD_WR_REG | (1 << 8) | (BRS_CTRL/4));
+ /* BXO = 1h, BRS to outbound */
+ WRITE_RPS1(0xc000008c);
+ /* wait for vbi_a or vbi_b*/
+ if ( 0 != (SAA7146_USE_PORT_B_FOR_VBI & dev->ext_vv_data->flags)) {
+ DEB_D("...using port b\n");
+ WRITE_RPS1(CMD_PAUSE | CMD_OAN | CMD_SIG1 | CMD_E_FID_B);
+ WRITE_RPS1(CMD_PAUSE | CMD_OAN | CMD_SIG1 | CMD_O_FID_B);
+/*
+ WRITE_RPS1(CMD_PAUSE | MASK_09);
+*/
+ } else {
+ DEB_D("...using port a\n");
+ WRITE_RPS1(CMD_PAUSE | MASK_10);
+ }
+ /* upload brs */
+ WRITE_RPS1(CMD_UPLOAD | MASK_08);
+ /* load brs-control register */
+ WRITE_RPS1(CMD_WR_REG | (1 << 8) | (BRS_CTRL/4));
+ /* BYO = 1, BXO = NQBIL (=1728 for PAL, for NTSC this is 858*2) - NumByte3 (=1440) = 288 */
+ WRITE_RPS1(((1728-(vbi_pixel_to_capture)) << 7) | MASK_19);
+ /* wait for brs_done */
+ WRITE_RPS1(CMD_PAUSE | MASK_08);
+ /* upload brs */
+ WRITE_RPS1(CMD_UPLOAD | MASK_08);
+ /* load video-dma3 NumLines3 and NumBytes3 */
+ WRITE_RPS1(CMD_WR_REG | (1 << 8) | (NUM_LINE_BYTE3/4));
+ /* dev->vbi_count*2 lines, 720 pixel (= 1440 Bytes) */
+ WRITE_RPS1((2 << 16) | (vbi_pixel_to_capture));
+ /* load brs-control register */
+ WRITE_RPS1(CMD_WR_REG | (1 << 8) | (BRS_CTRL/4));
+ /* Set BRS right: note: this is an experimental value for BXO (=> PAL!) */
+ WRITE_RPS1((540 << 7) | (5 << 19)); // 5 == vbi_start
+ /* wait for brs_done */
+ WRITE_RPS1(CMD_PAUSE | MASK_08);
+ /* upload brs and video-dma3*/
+ WRITE_RPS1(CMD_UPLOAD | MASK_08 | MASK_04);
+ /* load mc2 register: enable dma3 */
+ WRITE_RPS1(CMD_WR_REG | (1 << 8) | (MC1/4));
+ WRITE_RPS1(MASK_20 | MASK_04);
+ /* generate interrupt */
+ WRITE_RPS1(CMD_INTERRUPT);
+ /* stop rps1 */
+ WRITE_RPS1(CMD_STOP);
+
+ /* we have to do the workaround twice to be sure that
+ everything is ok */
+ for(i = 0; i < 2; i++) {
+
+ /* indicate to the irq handler that we do the workaround */
+ saa7146_write(dev, MC2, MASK_31|MASK_15);
+
+ saa7146_write(dev, NUM_LINE_BYTE3, (1<<16)|(2<<0));
+ saa7146_write(dev, MC2, MASK_04|MASK_20);
+
+ /* enable rps1 irqs */
+ SAA7146_IER_ENABLE(dev,MASK_28);
+
+ /* prepare to wait to be woken up by the irq-handler */
+ add_wait_queue(&vv->vbi_wq, &wait);
+ set_current_state(TASK_INTERRUPTIBLE);
+
+ /* start rps1 to enable workaround */
+ saa7146_write(dev, RPS_ADDR1, dev->d_rps1.dma_handle);
+ saa7146_write(dev, MC1, (MASK_13 | MASK_29));
+
+ schedule();
+
+ DEB_VBI("brs bug workaround %d/1\n", i);
+
+ remove_wait_queue(&vv->vbi_wq, &wait);
+ __set_current_state(TASK_RUNNING);
+
+ /* disable rps1 irqs */
+ SAA7146_IER_DISABLE(dev,MASK_28);
+
+ /* stop video-dma3 */
+ saa7146_write(dev, MC1, MASK_20);
+
+ if(signal_pending(current)) {
+
+ DEB_VBI("aborted (rps:0x%08x)\n",
+ saa7146_read(dev, RPS_ADDR1));
+
+ /* stop rps1 for sure */
+ saa7146_write(dev, MC1, MASK_29);
+
+ pci_free_consistent(dev->pci, 4096, cpu, dma_addr);
+ return -EINTR;
+ }
+ }
+
+ pci_free_consistent(dev->pci, 4096, cpu, dma_addr);
+ return 0;
+}
+
+static void saa7146_set_vbi_capture(struct saa7146_dev *dev, struct saa7146_buf *buf, struct saa7146_buf *next)
+{
+ struct saa7146_vv *vv = dev->vv_data;
+
+ struct saa7146_video_dma vdma3;
+
+ int count = 0;
+ unsigned long e_wait = vv->current_hps_sync == SAA7146_HPS_SYNC_PORT_A ? CMD_E_FID_A : CMD_E_FID_B;
+ unsigned long o_wait = vv->current_hps_sync == SAA7146_HPS_SYNC_PORT_A ? CMD_O_FID_A : CMD_O_FID_B;
+
+/*
+ vdma3.base_even = 0xc8000000+2560*70;
+ vdma3.base_odd = 0xc8000000;
+ vdma3.prot_addr = 0xc8000000+2560*164;
+ vdma3.pitch = 2560;
+ vdma3.base_page = 0;
+ vdma3.num_line_byte = (64<<16)|((vbi_pixel_to_capture)<<0); // set above!
+*/
+ vdma3.base_even = buf->pt[2].offset;
+ vdma3.base_odd = buf->pt[2].offset + 16 * vbi_pixel_to_capture;
+ vdma3.prot_addr = buf->pt[2].offset + 16 * 2 * vbi_pixel_to_capture;
+ vdma3.pitch = vbi_pixel_to_capture;
+ vdma3.base_page = buf->pt[2].dma | ME1;
+ vdma3.num_line_byte = (16 << 16) | vbi_pixel_to_capture;
+
+ saa7146_write_out_dma(dev, 3, &vdma3);
+
+ /* write beginning of rps-program */
+ count = 0;
+
+ /* wait for o_fid_a/b / e_fid_a/b toggle only if bit 1 is not set */
+
+ /* we don't wait here for the first field anymore. this is different from the video
+ capture and might cause that the first buffer is only half filled (with only
+ one field). but since this is some sort of streaming data, this is not that negative.
+ but by doing this, we can use the whole engine from videobuf-dma-sg.c... */
+
+/*
+ WRITE_RPS1(CMD_PAUSE | CMD_OAN | CMD_SIG1 | e_wait);
+ WRITE_RPS1(CMD_PAUSE | CMD_OAN | CMD_SIG1 | o_wait);
+*/
+ /* set bit 1 */
+ WRITE_RPS1(CMD_WR_REG | (1 << 8) | (MC2/4));
+ WRITE_RPS1(MASK_28 | MASK_12);
+
+ /* turn on video-dma3 */
+ WRITE_RPS1(CMD_WR_REG_MASK | (MC1/4));
+ WRITE_RPS1(MASK_04 | MASK_20); /* => mask */
+ WRITE_RPS1(MASK_04 | MASK_20); /* => values */
+
+ /* wait for o_fid_a/b / e_fid_a/b toggle */
+ WRITE_RPS1(CMD_PAUSE | o_wait);
+ WRITE_RPS1(CMD_PAUSE | e_wait);
+
+ /* generate interrupt */
+ WRITE_RPS1(CMD_INTERRUPT);
+
+ /* stop */
+ WRITE_RPS1(CMD_STOP);
+
+ /* enable rps1 irqs */
+ SAA7146_IER_ENABLE(dev, MASK_28);
+
+ /* write the address of the rps-program */
+ saa7146_write(dev, RPS_ADDR1, dev->d_rps1.dma_handle);
+
+ /* turn on rps */
+ saa7146_write(dev, MC1, (MASK_13 | MASK_29));
+}
+
+static int buffer_activate(struct saa7146_dev *dev,
+ struct saa7146_buf *buf,
+ struct saa7146_buf *next)
+{
+ struct saa7146_vv *vv = dev->vv_data;
+ buf->vb.state = VIDEOBUF_ACTIVE;
+
+ DEB_VBI("dev:%p, buf:%p, next:%p\n", dev, buf, next);
+ saa7146_set_vbi_capture(dev,buf,next);
+
+ mod_timer(&vv->vbi_dmaq.timeout, jiffies+BUFFER_TIMEOUT);
+ return 0;
+}
+
+static int buffer_prepare(struct videobuf_queue *q, struct videobuf_buffer *vb,enum v4l2_field field)
+{
+ struct file *file = q->priv_data;
+ struct saa7146_fh *fh = file->private_data;
+ struct saa7146_dev *dev = fh->dev;
+ struct saa7146_buf *buf = (struct saa7146_buf *)vb;
+
+ int err = 0;
+ int lines, llength, size;
+
+ lines = 16 * 2 ; /* 2 fields */
+ llength = vbi_pixel_to_capture;
+ size = lines * llength;
+
+ DEB_VBI("vb:%p\n", vb);
+
+ if (0 != buf->vb.baddr && buf->vb.bsize < size) {
+ DEB_VBI("size mismatch\n");
+ return -EINVAL;
+ }
+
+ if (buf->vb.size != size)
+ saa7146_dma_free(dev,q,buf);
+
+ if (VIDEOBUF_NEEDS_INIT == buf->vb.state) {
+ struct videobuf_dmabuf *dma=videobuf_to_dma(&buf->vb);
+
+ buf->vb.width = llength;
+ buf->vb.height = lines;
+ buf->vb.size = size;
+ buf->vb.field = field; // FIXME: check this
+
+ saa7146_pgtable_free(dev->pci, &buf->pt[2]);
+ saa7146_pgtable_alloc(dev->pci, &buf->pt[2]);
+
+ err = videobuf_iolock(q,&buf->vb, NULL);
+ if (err)
+ goto oops;
+ err = saa7146_pgtable_build_single(dev->pci, &buf->pt[2],
+ dma->sglist, dma->sglen);
+ if (0 != err)
+ return err;
+ }
+ buf->vb.state = VIDEOBUF_PREPARED;
+ buf->activate = buffer_activate;
+
+ return 0;
+
+ oops:
+ DEB_VBI("error out\n");
+ saa7146_dma_free(dev,q,buf);
+
+ return err;
+}
+
+static int buffer_setup(struct videobuf_queue *q, unsigned int *count, unsigned int *size)
+{
+ int llength,lines;
+
+ lines = 16 * 2 ; /* 2 fields */
+ llength = vbi_pixel_to_capture;
+
+ *size = lines * llength;
+ *count = 2;
+
+ DEB_VBI("count:%d, size:%d\n", *count, *size);
+
+ return 0;
+}
+
+static void buffer_queue(struct videobuf_queue *q, struct videobuf_buffer *vb)
+{
+ struct file *file = q->priv_data;
+ struct saa7146_fh *fh = file->private_data;
+ struct saa7146_dev *dev = fh->dev;
+ struct saa7146_vv *vv = dev->vv_data;
+ struct saa7146_buf *buf = (struct saa7146_buf *)vb;
+
+ DEB_VBI("vb:%p\n", vb);
+ saa7146_buffer_queue(dev, &vv->vbi_dmaq, buf);
+}
+
+static void buffer_release(struct videobuf_queue *q, struct videobuf_buffer *vb)
+{
+ struct file *file = q->priv_data;
+ struct saa7146_fh *fh = file->private_data;
+ struct saa7146_dev *dev = fh->dev;
+ struct saa7146_buf *buf = (struct saa7146_buf *)vb;
+
+ DEB_VBI("vb:%p\n", vb);
+ saa7146_dma_free(dev,q,buf);
+}
+
+static struct videobuf_queue_ops vbi_qops = {
+ .buf_setup = buffer_setup,
+ .buf_prepare = buffer_prepare,
+ .buf_queue = buffer_queue,
+ .buf_release = buffer_release,
+};
+
+/* ------------------------------------------------------------------ */
+
+static void vbi_stop(struct saa7146_fh *fh, struct file *file)
+{
+ struct saa7146_dev *dev = fh->dev;
+ struct saa7146_vv *vv = dev->vv_data;
+ unsigned long flags;
+ DEB_VBI("dev:%p, fh:%p\n", dev, fh);
+
+ spin_lock_irqsave(&dev->slock,flags);
+
+ /* disable rps1 */
+ saa7146_write(dev, MC1, MASK_29);
+
+ /* disable rps1 irqs */
+ SAA7146_IER_DISABLE(dev, MASK_28);
+
+ /* shut down dma 3 transfers */
+ saa7146_write(dev, MC1, MASK_20);
+
+ if (vv->vbi_dmaq.curr)
+ saa7146_buffer_finish(dev, &vv->vbi_dmaq, VIDEOBUF_DONE);
+
+ videobuf_queue_cancel(&fh->vbi_q);
+
+ vv->vbi_streaming = NULL;
+
+ del_timer(&vv->vbi_dmaq.timeout);
+ del_timer(&vv->vbi_read_timeout);
+
+ spin_unlock_irqrestore(&dev->slock, flags);
+}
+
+static void vbi_read_timeout(unsigned long data)
+{
+ struct file *file = (struct file*)data;
+ struct saa7146_fh *fh = file->private_data;
+ struct saa7146_dev *dev = fh->dev;
+
+ DEB_VBI("dev:%p, fh:%p\n", dev, fh);
+
+ vbi_stop(fh, file);
+}
+
+static void vbi_init(struct saa7146_dev *dev, struct saa7146_vv *vv)
+{
+ DEB_VBI("dev:%p\n", dev);
+
+ INIT_LIST_HEAD(&vv->vbi_dmaq.queue);
+
+ init_timer(&vv->vbi_dmaq.timeout);
+ vv->vbi_dmaq.timeout.function = saa7146_buffer_timeout;
+ vv->vbi_dmaq.timeout.data = (unsigned long)(&vv->vbi_dmaq);
+ vv->vbi_dmaq.dev = dev;
+
+ init_waitqueue_head(&vv->vbi_wq);
+}
+
+static int vbi_open(struct saa7146_dev *dev, struct file *file)
+{
+ struct saa7146_fh *fh = file->private_data;
+ struct saa7146_vv *vv = fh->dev->vv_data;
+
+ u32 arbtr_ctrl = saa7146_read(dev, PCI_BT_V1);
+ int ret = 0;
+
+ DEB_VBI("dev:%p, fh:%p\n", dev, fh);
+
+ ret = saa7146_res_get(fh, RESOURCE_DMA3_BRS);
+ if (0 == ret) {
+ DEB_S("cannot get vbi RESOURCE_DMA3_BRS resource\n");
+ return -EBUSY;
+ }
+
+ /* adjust arbitrition control for video dma 3 */
+ arbtr_ctrl &= ~0x1f0000;
+ arbtr_ctrl |= 0x1d0000;
+ saa7146_write(dev, PCI_BT_V1, arbtr_ctrl);
+ saa7146_write(dev, MC2, (MASK_04|MASK_20));
+
+ videobuf_queue_sg_init(&fh->vbi_q, &vbi_qops,
+ &dev->pci->dev, &dev->slock,
+ V4L2_BUF_TYPE_VBI_CAPTURE,
+ V4L2_FIELD_SEQ_TB, // FIXME: does this really work?
+ sizeof(struct saa7146_buf),
+ file, &dev->v4l2_lock);
+
+ vv->vbi_read_timeout.function = vbi_read_timeout;
+ vv->vbi_read_timeout.data = (unsigned long)file;
+
+ /* initialize the brs */
+ if ( 0 != (SAA7146_USE_PORT_B_FOR_VBI & dev->ext_vv_data->flags)) {
+ saa7146_write(dev, BRS_CTRL, MASK_30|MASK_29 | (7 << 19));
+ } else {
+ saa7146_write(dev, BRS_CTRL, 0x00000001);
+
+ if (0 != (ret = vbi_workaround(dev))) {
+ DEB_VBI("vbi workaround failed!\n");
+ /* return ret;*/
+ }
+ }
+
+ /* upload brs register */
+ saa7146_write(dev, MC2, (MASK_08|MASK_24));
+ return 0;
+}
+
+static void vbi_close(struct saa7146_dev *dev, struct file *file)
+{
+ struct saa7146_fh *fh = file->private_data;
+ struct saa7146_vv *vv = dev->vv_data;
+ DEB_VBI("dev:%p, fh:%p\n", dev, fh);
+
+ if( fh == vv->vbi_streaming ) {
+ vbi_stop(fh, file);
+ }
+ saa7146_res_free(fh, RESOURCE_DMA3_BRS);
+}
+
+static void vbi_irq_done(struct saa7146_dev *dev, unsigned long status)
+{
+ struct saa7146_vv *vv = dev->vv_data;
+ spin_lock(&dev->slock);
+
+ if (vv->vbi_dmaq.curr) {
+ DEB_VBI("dev:%p, curr:%p\n", dev, vv->vbi_dmaq.curr);
+ /* this must be += 2, one count for each field */
+ vv->vbi_fieldcount+=2;
+ vv->vbi_dmaq.curr->vb.field_count = vv->vbi_fieldcount;
+ saa7146_buffer_finish(dev, &vv->vbi_dmaq, VIDEOBUF_DONE);
+ } else {
+ DEB_VBI("dev:%p\n", dev);
+ }
+ saa7146_buffer_next(dev, &vv->vbi_dmaq, 1);
+
+ spin_unlock(&dev->slock);
+}
+
+static ssize_t vbi_read(struct file *file, char __user *data, size_t count, loff_t *ppos)
+{
+ struct saa7146_fh *fh = file->private_data;
+ struct saa7146_dev *dev = fh->dev;
+ struct saa7146_vv *vv = dev->vv_data;
+ ssize_t ret = 0;
+
+ DEB_VBI("dev:%p, fh:%p\n", dev, fh);
+
+ if( NULL == vv->vbi_streaming ) {
+ // fixme: check if dma3 is available
+ // fixme: activate vbi engine here if necessary. (really?)
+ vv->vbi_streaming = fh;
+ }
+
+ if( fh != vv->vbi_streaming ) {
+ DEB_VBI("open %p is already using vbi capture\n",
+ vv->vbi_streaming);
+ return -EBUSY;
+ }
+
+ mod_timer(&vv->vbi_read_timeout, jiffies+BUFFER_TIMEOUT);
+ ret = videobuf_read_stream(&fh->vbi_q, data, count, ppos, 1,
+ file->f_flags & O_NONBLOCK);
+/*
+ printk("BASE_ODD3: 0x%08x\n", saa7146_read(dev, BASE_ODD3));
+ printk("BASE_EVEN3: 0x%08x\n", saa7146_read(dev, BASE_EVEN3));
+ printk("PROT_ADDR3: 0x%08x\n", saa7146_read(dev, PROT_ADDR3));
+ printk("PITCH3: 0x%08x\n", saa7146_read(dev, PITCH3));
+ printk("BASE_PAGE3: 0x%08x\n", saa7146_read(dev, BASE_PAGE3));
+ printk("NUM_LINE_BYTE3: 0x%08x\n", saa7146_read(dev, NUM_LINE_BYTE3));
+ printk("BRS_CTRL: 0x%08x\n", saa7146_read(dev, BRS_CTRL));
+*/
+ return ret;
+}
+
+struct saa7146_use_ops saa7146_vbi_uops = {
+ .init = vbi_init,
+ .open = vbi_open,
+ .release = vbi_close,
+ .irq_done = vbi_irq_done,
+ .read = vbi_read,
+};
diff --git a/kernel/drivers/media/common/saa7146/saa7146_video.c b/kernel/drivers/media/common/saa7146/saa7146_video.c
new file mode 100644
index 000000000..30779498c
--- /dev/null
+++ b/kernel/drivers/media/common/saa7146/saa7146_video.c
@@ -0,0 +1,1309 @@
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <media/saa7146_vv.h>
+#include <media/v4l2-event.h>
+#include <media/v4l2-ctrls.h>
+#include <linux/module.h>
+
+static int max_memory = 32;
+
+module_param(max_memory, int, 0644);
+MODULE_PARM_DESC(max_memory, "maximum memory usage for capture buffers (default: 32Mb)");
+
+#define IS_CAPTURE_ACTIVE(fh) \
+ (((vv->video_status & STATUS_CAPTURE) != 0) && (vv->video_fh == fh))
+
+#define IS_OVERLAY_ACTIVE(fh) \
+ (((vv->video_status & STATUS_OVERLAY) != 0) && (vv->video_fh == fh))
+
+/* format descriptions for capture and preview */
+static struct saa7146_format formats[] = {
+ {
+ .name = "RGB-8 (3-3-2)",
+ .pixelformat = V4L2_PIX_FMT_RGB332,
+ .trans = RGB08_COMPOSED,
+ .depth = 8,
+ .flags = 0,
+ }, {
+ .name = "RGB-16 (5/B-6/G-5/R)",
+ .pixelformat = V4L2_PIX_FMT_RGB565,
+ .trans = RGB16_COMPOSED,
+ .depth = 16,
+ .flags = 0,
+ }, {
+ .name = "RGB-24 (B-G-R)",
+ .pixelformat = V4L2_PIX_FMT_BGR24,
+ .trans = RGB24_COMPOSED,
+ .depth = 24,
+ .flags = 0,
+ }, {
+ .name = "RGB-32 (B-G-R)",
+ .pixelformat = V4L2_PIX_FMT_BGR32,
+ .trans = RGB32_COMPOSED,
+ .depth = 32,
+ .flags = 0,
+ }, {
+ .name = "RGB-32 (R-G-B)",
+ .pixelformat = V4L2_PIX_FMT_RGB32,
+ .trans = RGB32_COMPOSED,
+ .depth = 32,
+ .flags = 0,
+ .swap = 0x2,
+ }, {
+ .name = "Greyscale-8",
+ .pixelformat = V4L2_PIX_FMT_GREY,
+ .trans = Y8,
+ .depth = 8,
+ .flags = 0,
+ }, {
+ .name = "YUV 4:2:2 planar (Y-Cb-Cr)",
+ .pixelformat = V4L2_PIX_FMT_YUV422P,
+ .trans = YUV422_DECOMPOSED,
+ .depth = 16,
+ .flags = FORMAT_BYTE_SWAP|FORMAT_IS_PLANAR,
+ }, {
+ .name = "YVU 4:2:0 planar (Y-Cb-Cr)",
+ .pixelformat = V4L2_PIX_FMT_YVU420,
+ .trans = YUV420_DECOMPOSED,
+ .depth = 12,
+ .flags = FORMAT_BYTE_SWAP|FORMAT_IS_PLANAR,
+ }, {
+ .name = "YUV 4:2:0 planar (Y-Cb-Cr)",
+ .pixelformat = V4L2_PIX_FMT_YUV420,
+ .trans = YUV420_DECOMPOSED,
+ .depth = 12,
+ .flags = FORMAT_IS_PLANAR,
+ }, {
+ .name = "YUV 4:2:2 (U-Y-V-Y)",
+ .pixelformat = V4L2_PIX_FMT_UYVY,
+ .trans = YUV422_COMPOSED,
+ .depth = 16,
+ .flags = 0,
+ }
+};
+
+/* unfortunately, the saa7146 contains a bug which prevents it from doing on-the-fly byte swaps.
+ due to this, it's impossible to provide additional *packed* formats, which are simply byte swapped
+ (like V4L2_PIX_FMT_YUYV) ... 8-( */
+
+static int NUM_FORMATS = sizeof(formats)/sizeof(struct saa7146_format);
+
+struct saa7146_format* saa7146_format_by_fourcc(struct saa7146_dev *dev, int fourcc)
+{
+ int i, j = NUM_FORMATS;
+
+ for (i = 0; i < j; i++) {
+ if (formats[i].pixelformat == fourcc) {
+ return formats+i;
+ }
+ }
+
+ DEB_D("unknown pixelformat:'%4.4s'\n", (char *)&fourcc);
+ return NULL;
+}
+
+static int vidioc_try_fmt_vid_overlay(struct file *file, void *fh, struct v4l2_format *f);
+
+int saa7146_start_preview(struct saa7146_fh *fh)
+{
+ struct saa7146_dev *dev = fh->dev;
+ struct saa7146_vv *vv = dev->vv_data;
+ struct v4l2_format fmt;
+ int ret = 0, err = 0;
+
+ DEB_EE("dev:%p, fh:%p\n", dev, fh);
+
+ /* check if we have overlay information */
+ if (vv->ov.fh == NULL) {
+ DEB_D("no overlay data available. try S_FMT first.\n");
+ return -EAGAIN;
+ }
+
+ /* check if streaming capture is running */
+ if (IS_CAPTURE_ACTIVE(fh) != 0) {
+ DEB_D("streaming capture is active\n");
+ return -EBUSY;
+ }
+
+ /* check if overlay is running */
+ if (IS_OVERLAY_ACTIVE(fh) != 0) {
+ if (vv->video_fh == fh) {
+ DEB_D("overlay is already active\n");
+ return 0;
+ }
+ DEB_D("overlay is already active in another open\n");
+ return -EBUSY;
+ }
+
+ if (0 == saa7146_res_get(fh, RESOURCE_DMA1_HPS|RESOURCE_DMA2_CLP)) {
+ DEB_D("cannot get necessary overlay resources\n");
+ return -EBUSY;
+ }
+
+ fmt.fmt.win = vv->ov.win;
+ err = vidioc_try_fmt_vid_overlay(NULL, fh, &fmt);
+ if (0 != err) {
+ saa7146_res_free(vv->video_fh, RESOURCE_DMA1_HPS|RESOURCE_DMA2_CLP);
+ return -EBUSY;
+ }
+ vv->ov.win = fmt.fmt.win;
+
+ DEB_D("%dx%d+%d+%d %s field=%s\n",
+ vv->ov.win.w.width, vv->ov.win.w.height,
+ vv->ov.win.w.left, vv->ov.win.w.top,
+ vv->ov_fmt->name, v4l2_field_names[vv->ov.win.field]);
+
+ if (0 != (ret = saa7146_enable_overlay(fh))) {
+ DEB_D("enabling overlay failed: %d\n", ret);
+ saa7146_res_free(vv->video_fh, RESOURCE_DMA1_HPS|RESOURCE_DMA2_CLP);
+ return ret;
+ }
+
+ vv->video_status = STATUS_OVERLAY;
+ vv->video_fh = fh;
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(saa7146_start_preview);
+
+int saa7146_stop_preview(struct saa7146_fh *fh)
+{
+ struct saa7146_dev *dev = fh->dev;
+ struct saa7146_vv *vv = dev->vv_data;
+
+ DEB_EE("dev:%p, fh:%p\n", dev, fh);
+
+ /* check if streaming capture is running */
+ if (IS_CAPTURE_ACTIVE(fh) != 0) {
+ DEB_D("streaming capture is active\n");
+ return -EBUSY;
+ }
+
+ /* check if overlay is running at all */
+ if ((vv->video_status & STATUS_OVERLAY) == 0) {
+ DEB_D("no active overlay\n");
+ return 0;
+ }
+
+ if (vv->video_fh != fh) {
+ DEB_D("overlay is active, but in another open\n");
+ return -EBUSY;
+ }
+
+ vv->video_status = 0;
+ vv->video_fh = NULL;
+
+ saa7146_disable_overlay(fh);
+
+ saa7146_res_free(fh, RESOURCE_DMA1_HPS|RESOURCE_DMA2_CLP);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(saa7146_stop_preview);
+
+/********************************************************************************/
+/* common pagetable functions */
+
+static int saa7146_pgtable_build(struct saa7146_dev *dev, struct saa7146_buf *buf)
+{
+ struct pci_dev *pci = dev->pci;
+ struct videobuf_dmabuf *dma=videobuf_to_dma(&buf->vb);
+ struct scatterlist *list = dma->sglist;
+ int length = dma->sglen;
+ struct saa7146_format *sfmt = saa7146_format_by_fourcc(dev,buf->fmt->pixelformat);
+
+ DEB_EE("dev:%p, buf:%p, sg_len:%d\n", dev, buf, length);
+
+ if( 0 != IS_PLANAR(sfmt->trans)) {
+ struct saa7146_pgtable *pt1 = &buf->pt[0];
+ struct saa7146_pgtable *pt2 = &buf->pt[1];
+ struct saa7146_pgtable *pt3 = &buf->pt[2];
+ __le32 *ptr1, *ptr2, *ptr3;
+ __le32 fill;
+
+ int size = buf->fmt->width*buf->fmt->height;
+ int i,p,m1,m2,m3,o1,o2;
+
+ switch( sfmt->depth ) {
+ case 12: {
+ /* create some offsets inside the page table */
+ m1 = ((size+PAGE_SIZE)/PAGE_SIZE)-1;
+ m2 = ((size+(size/4)+PAGE_SIZE)/PAGE_SIZE)-1;
+ m3 = ((size+(size/2)+PAGE_SIZE)/PAGE_SIZE)-1;
+ o1 = size%PAGE_SIZE;
+ o2 = (size+(size/4))%PAGE_SIZE;
+ DEB_CAP("size:%d, m1:%d, m2:%d, m3:%d, o1:%d, o2:%d\n",
+ size, m1, m2, m3, o1, o2);
+ break;
+ }
+ case 16: {
+ /* create some offsets inside the page table */
+ m1 = ((size+PAGE_SIZE)/PAGE_SIZE)-1;
+ m2 = ((size+(size/2)+PAGE_SIZE)/PAGE_SIZE)-1;
+ m3 = ((2*size+PAGE_SIZE)/PAGE_SIZE)-1;
+ o1 = size%PAGE_SIZE;
+ o2 = (size+(size/2))%PAGE_SIZE;
+ DEB_CAP("size:%d, m1:%d, m2:%d, m3:%d, o1:%d, o2:%d\n",
+ size, m1, m2, m3, o1, o2);
+ break;
+ }
+ default: {
+ return -1;
+ }
+ }
+
+ ptr1 = pt1->cpu;
+ ptr2 = pt2->cpu;
+ ptr3 = pt3->cpu;
+
+ /* walk all pages, copy all page addresses to ptr1 */
+ for (i = 0; i < length; i++, list++) {
+ for (p = 0; p * 4096 < list->length; p++, ptr1++) {
+ *ptr1 = cpu_to_le32(sg_dma_address(list) - list->offset);
+ }
+ }
+/*
+ ptr1 = pt1->cpu;
+ for(j=0;j<40;j++) {
+ printk("ptr1 %d: 0x%08x\n",j,ptr1[j]);
+ }
+*/
+
+ /* if we have a user buffer, the first page may not be
+ aligned to a page boundary. */
+ pt1->offset = dma->sglist->offset;
+ pt2->offset = pt1->offset+o1;
+ pt3->offset = pt1->offset+o2;
+
+ /* create video-dma2 page table */
+ ptr1 = pt1->cpu;
+ for(i = m1; i <= m2 ; i++, ptr2++) {
+ *ptr2 = ptr1[i];
+ }
+ fill = *(ptr2-1);
+ for(;i<1024;i++,ptr2++) {
+ *ptr2 = fill;
+ }
+ /* create video-dma3 page table */
+ ptr1 = pt1->cpu;
+ for(i = m2; i <= m3; i++,ptr3++) {
+ *ptr3 = ptr1[i];
+ }
+ fill = *(ptr3-1);
+ for(;i<1024;i++,ptr3++) {
+ *ptr3 = fill;
+ }
+ /* finally: finish up video-dma1 page table */
+ ptr1 = pt1->cpu+m1;
+ fill = pt1->cpu[m1];
+ for(i=m1;i<1024;i++,ptr1++) {
+ *ptr1 = fill;
+ }
+/*
+ ptr1 = pt1->cpu;
+ ptr2 = pt2->cpu;
+ ptr3 = pt3->cpu;
+ for(j=0;j<40;j++) {
+ printk("ptr1 %d: 0x%08x\n",j,ptr1[j]);
+ }
+ for(j=0;j<40;j++) {
+ printk("ptr2 %d: 0x%08x\n",j,ptr2[j]);
+ }
+ for(j=0;j<40;j++) {
+ printk("ptr3 %d: 0x%08x\n",j,ptr3[j]);
+ }
+*/
+ } else {
+ struct saa7146_pgtable *pt = &buf->pt[0];
+ return saa7146_pgtable_build_single(pci, pt, list, length);
+ }
+
+ return 0;
+}
+
+
+/********************************************************************************/
+/* file operations */
+
+static int video_begin(struct saa7146_fh *fh)
+{
+ struct saa7146_dev *dev = fh->dev;
+ struct saa7146_vv *vv = dev->vv_data;
+ struct saa7146_format *fmt = NULL;
+ unsigned int resource;
+ int ret = 0, err = 0;
+
+ DEB_EE("dev:%p, fh:%p\n", dev, fh);
+
+ if ((vv->video_status & STATUS_CAPTURE) != 0) {
+ if (vv->video_fh == fh) {
+ DEB_S("already capturing\n");
+ return 0;
+ }
+ DEB_S("already capturing in another open\n");
+ return -EBUSY;
+ }
+
+ if ((vv->video_status & STATUS_OVERLAY) != 0) {
+ DEB_S("warning: suspending overlay video for streaming capture\n");
+ vv->ov_suspend = vv->video_fh;
+ err = saa7146_stop_preview(vv->video_fh); /* side effect: video_status is now 0, video_fh is NULL */
+ if (0 != err) {
+ DEB_D("suspending video failed. aborting\n");
+ return err;
+ }
+ }
+
+ fmt = saa7146_format_by_fourcc(dev, vv->video_fmt.pixelformat);
+ /* we need to have a valid format set here */
+ BUG_ON(NULL == fmt);
+
+ if (0 != (fmt->flags & FORMAT_IS_PLANAR)) {
+ resource = RESOURCE_DMA1_HPS|RESOURCE_DMA2_CLP|RESOURCE_DMA3_BRS;
+ } else {
+ resource = RESOURCE_DMA1_HPS;
+ }
+
+ ret = saa7146_res_get(fh, resource);
+ if (0 == ret) {
+ DEB_S("cannot get capture resource %d\n", resource);
+ if (vv->ov_suspend != NULL) {
+ saa7146_start_preview(vv->ov_suspend);
+ vv->ov_suspend = NULL;
+ }
+ return -EBUSY;
+ }
+
+ /* clear out beginning of streaming bit (rps register 0)*/
+ saa7146_write(dev, MC2, MASK_27 );
+
+ /* enable rps0 irqs */
+ SAA7146_IER_ENABLE(dev, MASK_27);
+
+ vv->video_fh = fh;
+ vv->video_status = STATUS_CAPTURE;
+
+ return 0;
+}
+
+static int video_end(struct saa7146_fh *fh, struct file *file)
+{
+ struct saa7146_dev *dev = fh->dev;
+ struct saa7146_vv *vv = dev->vv_data;
+ struct saa7146_format *fmt = NULL;
+ unsigned long flags;
+ unsigned int resource;
+ u32 dmas = 0;
+ DEB_EE("dev:%p, fh:%p\n", dev, fh);
+
+ if ((vv->video_status & STATUS_CAPTURE) != STATUS_CAPTURE) {
+ DEB_S("not capturing\n");
+ return 0;
+ }
+
+ if (vv->video_fh != fh) {
+ DEB_S("capturing, but in another open\n");
+ return -EBUSY;
+ }
+
+ fmt = saa7146_format_by_fourcc(dev, vv->video_fmt.pixelformat);
+ /* we need to have a valid format set here */
+ BUG_ON(NULL == fmt);
+
+ if (0 != (fmt->flags & FORMAT_IS_PLANAR)) {
+ resource = RESOURCE_DMA1_HPS|RESOURCE_DMA2_CLP|RESOURCE_DMA3_BRS;
+ dmas = MASK_22 | MASK_21 | MASK_20;
+ } else {
+ resource = RESOURCE_DMA1_HPS;
+ dmas = MASK_22;
+ }
+ spin_lock_irqsave(&dev->slock,flags);
+
+ /* disable rps0 */
+ saa7146_write(dev, MC1, MASK_28);
+
+ /* disable rps0 irqs */
+ SAA7146_IER_DISABLE(dev, MASK_27);
+
+ /* shut down all used video dma transfers */
+ saa7146_write(dev, MC1, dmas);
+
+ spin_unlock_irqrestore(&dev->slock, flags);
+
+ vv->video_fh = NULL;
+ vv->video_status = 0;
+
+ saa7146_res_free(fh, resource);
+
+ if (vv->ov_suspend != NULL) {
+ saa7146_start_preview(vv->ov_suspend);
+ vv->ov_suspend = NULL;
+ }
+
+ return 0;
+}
+
+static int vidioc_querycap(struct file *file, void *fh, struct v4l2_capability *cap)
+{
+ struct video_device *vdev = video_devdata(file);
+ struct saa7146_dev *dev = ((struct saa7146_fh *)fh)->dev;
+
+ strcpy((char *)cap->driver, "saa7146 v4l2");
+ strlcpy((char *)cap->card, dev->ext->name, sizeof(cap->card));
+ sprintf((char *)cap->bus_info, "PCI:%s", pci_name(dev->pci));
+ cap->device_caps =
+ V4L2_CAP_VIDEO_CAPTURE |
+ V4L2_CAP_VIDEO_OVERLAY |
+ V4L2_CAP_READWRITE |
+ V4L2_CAP_STREAMING;
+ cap->device_caps |= dev->ext_vv_data->capabilities;
+ cap->capabilities = cap->device_caps | V4L2_CAP_DEVICE_CAPS;
+ if (vdev->vfl_type == VFL_TYPE_GRABBER)
+ cap->device_caps &=
+ ~(V4L2_CAP_VBI_CAPTURE | V4L2_CAP_SLICED_VBI_OUTPUT);
+ else
+ cap->device_caps &=
+ ~(V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_VIDEO_OVERLAY | V4L2_CAP_AUDIO);
+ return 0;
+}
+
+static int vidioc_g_fbuf(struct file *file, void *fh, struct v4l2_framebuffer *fb)
+{
+ struct saa7146_dev *dev = ((struct saa7146_fh *)fh)->dev;
+ struct saa7146_vv *vv = dev->vv_data;
+
+ *fb = vv->ov_fb;
+ fb->capability = V4L2_FBUF_CAP_LIST_CLIPPING;
+ fb->flags = V4L2_FBUF_FLAG_PRIMARY;
+ return 0;
+}
+
+static int vidioc_s_fbuf(struct file *file, void *fh, const struct v4l2_framebuffer *fb)
+{
+ struct saa7146_dev *dev = ((struct saa7146_fh *)fh)->dev;
+ struct saa7146_vv *vv = dev->vv_data;
+ struct saa7146_format *fmt;
+
+ DEB_EE("VIDIOC_S_FBUF\n");
+
+ if (!capable(CAP_SYS_ADMIN) && !capable(CAP_SYS_RAWIO))
+ return -EPERM;
+
+ /* check args */
+ fmt = saa7146_format_by_fourcc(dev, fb->fmt.pixelformat);
+ if (NULL == fmt)
+ return -EINVAL;
+
+ /* planar formats are not allowed for overlay video, clipping and video dma would clash */
+ if (fmt->flags & FORMAT_IS_PLANAR)
+ DEB_S("planar pixelformat '%4.4s' not allowed for overlay\n",
+ (char *)&fmt->pixelformat);
+
+ /* check if overlay is running */
+ if (IS_OVERLAY_ACTIVE(fh) != 0) {
+ if (vv->video_fh != fh) {
+ DEB_D("refusing to change framebuffer informations while overlay is active in another open\n");
+ return -EBUSY;
+ }
+ }
+
+ /* ok, accept it */
+ vv->ov_fb = *fb;
+ vv->ov_fmt = fmt;
+
+ if (vv->ov_fb.fmt.bytesperline < vv->ov_fb.fmt.width) {
+ vv->ov_fb.fmt.bytesperline = vv->ov_fb.fmt.width * fmt->depth / 8;
+ DEB_D("setting bytesperline to %d\n", vv->ov_fb.fmt.bytesperline);
+ }
+ return 0;
+}
+
+static int vidioc_enum_fmt_vid_cap(struct file *file, void *fh, struct v4l2_fmtdesc *f)
+{
+ if (f->index >= NUM_FORMATS)
+ return -EINVAL;
+ strlcpy((char *)f->description, formats[f->index].name,
+ sizeof(f->description));
+ f->pixelformat = formats[f->index].pixelformat;
+ return 0;
+}
+
+int saa7146_s_ctrl(struct v4l2_ctrl *ctrl)
+{
+ struct saa7146_dev *dev = container_of(ctrl->handler,
+ struct saa7146_dev, ctrl_handler);
+ struct saa7146_vv *vv = dev->vv_data;
+ u32 val;
+
+ switch (ctrl->id) {
+ case V4L2_CID_BRIGHTNESS:
+ val = saa7146_read(dev, BCS_CTRL);
+ val &= 0x00ffffff;
+ val |= (ctrl->val << 24);
+ saa7146_write(dev, BCS_CTRL, val);
+ saa7146_write(dev, MC2, MASK_22 | MASK_06);
+ break;
+
+ case V4L2_CID_CONTRAST:
+ val = saa7146_read(dev, BCS_CTRL);
+ val &= 0xff00ffff;
+ val |= (ctrl->val << 16);
+ saa7146_write(dev, BCS_CTRL, val);
+ saa7146_write(dev, MC2, MASK_22 | MASK_06);
+ break;
+
+ case V4L2_CID_SATURATION:
+ val = saa7146_read(dev, BCS_CTRL);
+ val &= 0xffffff00;
+ val |= (ctrl->val << 0);
+ saa7146_write(dev, BCS_CTRL, val);
+ saa7146_write(dev, MC2, MASK_22 | MASK_06);
+ break;
+
+ case V4L2_CID_HFLIP:
+ /* fixme: we can support changing VFLIP and HFLIP here... */
+ if ((vv->video_status & STATUS_CAPTURE))
+ return -EBUSY;
+ vv->hflip = ctrl->val;
+ break;
+
+ case V4L2_CID_VFLIP:
+ if ((vv->video_status & STATUS_CAPTURE))
+ return -EBUSY;
+ vv->vflip = ctrl->val;
+ break;
+
+ default:
+ return -EINVAL;
+ }
+
+ if ((vv->video_status & STATUS_OVERLAY) != 0) { /* CHECK: && (vv->video_fh == fh)) */
+ struct saa7146_fh *fh = vv->video_fh;
+
+ saa7146_stop_preview(fh);
+ saa7146_start_preview(fh);
+ }
+ return 0;
+}
+
+static int vidioc_g_parm(struct file *file, void *fh,
+ struct v4l2_streamparm *parm)
+{
+ struct saa7146_dev *dev = ((struct saa7146_fh *)fh)->dev;
+ struct saa7146_vv *vv = dev->vv_data;
+
+ if (parm->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
+ return -EINVAL;
+ parm->parm.capture.readbuffers = 1;
+ v4l2_video_std_frame_period(vv->standard->id,
+ &parm->parm.capture.timeperframe);
+ return 0;
+}
+
+static int vidioc_g_fmt_vid_cap(struct file *file, void *fh, struct v4l2_format *f)
+{
+ struct saa7146_dev *dev = ((struct saa7146_fh *)fh)->dev;
+ struct saa7146_vv *vv = dev->vv_data;
+
+ f->fmt.pix = vv->video_fmt;
+ return 0;
+}
+
+static int vidioc_g_fmt_vid_overlay(struct file *file, void *fh, struct v4l2_format *f)
+{
+ struct saa7146_dev *dev = ((struct saa7146_fh *)fh)->dev;
+ struct saa7146_vv *vv = dev->vv_data;
+
+ f->fmt.win = vv->ov.win;
+ return 0;
+}
+
+static int vidioc_g_fmt_vbi_cap(struct file *file, void *fh, struct v4l2_format *f)
+{
+ struct saa7146_dev *dev = ((struct saa7146_fh *)fh)->dev;
+ struct saa7146_vv *vv = dev->vv_data;
+
+ f->fmt.vbi = vv->vbi_fmt;
+ return 0;
+}
+
+static int vidioc_try_fmt_vid_cap(struct file *file, void *fh, struct v4l2_format *f)
+{
+ struct saa7146_dev *dev = ((struct saa7146_fh *)fh)->dev;
+ struct saa7146_vv *vv = dev->vv_data;
+ struct saa7146_format *fmt;
+ enum v4l2_field field;
+ int maxw, maxh;
+ int calc_bpl;
+
+ DEB_EE("V4L2_BUF_TYPE_VIDEO_CAPTURE: dev:%p, fh:%p\n", dev, fh);
+
+ fmt = saa7146_format_by_fourcc(dev, f->fmt.pix.pixelformat);
+ if (NULL == fmt)
+ return -EINVAL;
+
+ field = f->fmt.pix.field;
+ maxw = vv->standard->h_max_out;
+ maxh = vv->standard->v_max_out;
+
+ if (V4L2_FIELD_ANY == field) {
+ field = (f->fmt.pix.height > maxh / 2)
+ ? V4L2_FIELD_INTERLACED
+ : V4L2_FIELD_BOTTOM;
+ }
+ switch (field) {
+ case V4L2_FIELD_ALTERNATE:
+ vv->last_field = V4L2_FIELD_TOP;
+ maxh = maxh / 2;
+ break;
+ case V4L2_FIELD_TOP:
+ case V4L2_FIELD_BOTTOM:
+ vv->last_field = V4L2_FIELD_INTERLACED;
+ maxh = maxh / 2;
+ break;
+ case V4L2_FIELD_INTERLACED:
+ vv->last_field = V4L2_FIELD_INTERLACED;
+ break;
+ default:
+ DEB_D("no known field mode '%d'\n", field);
+ return -EINVAL;
+ }
+
+ f->fmt.pix.field = field;
+ f->fmt.pix.colorspace = V4L2_COLORSPACE_SMPTE170M;
+ if (f->fmt.pix.width > maxw)
+ f->fmt.pix.width = maxw;
+ if (f->fmt.pix.height > maxh)
+ f->fmt.pix.height = maxh;
+
+ calc_bpl = (f->fmt.pix.width * fmt->depth) / 8;
+
+ if (f->fmt.pix.bytesperline < calc_bpl)
+ f->fmt.pix.bytesperline = calc_bpl;
+
+ if (f->fmt.pix.bytesperline > (2 * PAGE_SIZE * fmt->depth) / 8) /* arbitrary constraint */
+ f->fmt.pix.bytesperline = calc_bpl;
+
+ f->fmt.pix.sizeimage = f->fmt.pix.bytesperline * f->fmt.pix.height;
+ DEB_D("w:%d, h:%d, bytesperline:%d, sizeimage:%d\n",
+ f->fmt.pix.width, f->fmt.pix.height,
+ f->fmt.pix.bytesperline, f->fmt.pix.sizeimage);
+
+ return 0;
+}
+
+
+static int vidioc_try_fmt_vid_overlay(struct file *file, void *fh, struct v4l2_format *f)
+{
+ struct saa7146_dev *dev = ((struct saa7146_fh *)fh)->dev;
+ struct saa7146_vv *vv = dev->vv_data;
+ struct v4l2_window *win = &f->fmt.win;
+ enum v4l2_field field;
+ int maxw, maxh;
+
+ DEB_EE("dev:%p\n", dev);
+
+ if (NULL == vv->ov_fb.base) {
+ DEB_D("no fb base set\n");
+ return -EINVAL;
+ }
+ if (NULL == vv->ov_fmt) {
+ DEB_D("no fb fmt set\n");
+ return -EINVAL;
+ }
+ if (win->w.width < 48 || win->w.height < 32) {
+ DEB_D("min width/height. (%d,%d)\n",
+ win->w.width, win->w.height);
+ return -EINVAL;
+ }
+ if (win->clipcount > 16) {
+ DEB_D("clipcount too big\n");
+ return -EINVAL;
+ }
+
+ field = win->field;
+ maxw = vv->standard->h_max_out;
+ maxh = vv->standard->v_max_out;
+
+ if (V4L2_FIELD_ANY == field) {
+ field = (win->w.height > maxh / 2)
+ ? V4L2_FIELD_INTERLACED
+ : V4L2_FIELD_TOP;
+ }
+ switch (field) {
+ case V4L2_FIELD_TOP:
+ case V4L2_FIELD_BOTTOM:
+ case V4L2_FIELD_ALTERNATE:
+ maxh = maxh / 2;
+ break;
+ case V4L2_FIELD_INTERLACED:
+ break;
+ default:
+ DEB_D("no known field mode '%d'\n", field);
+ return -EINVAL;
+ }
+
+ win->field = field;
+ if (win->w.width > maxw)
+ win->w.width = maxw;
+ if (win->w.height > maxh)
+ win->w.height = maxh;
+
+ return 0;
+}
+
+static int vidioc_s_fmt_vid_cap(struct file *file, void *__fh, struct v4l2_format *f)
+{
+ struct saa7146_fh *fh = __fh;
+ struct saa7146_dev *dev = fh->dev;
+ struct saa7146_vv *vv = dev->vv_data;
+ int err;
+
+ DEB_EE("V4L2_BUF_TYPE_VIDEO_CAPTURE: dev:%p, fh:%p\n", dev, fh);
+ if (IS_CAPTURE_ACTIVE(fh) != 0) {
+ DEB_EE("streaming capture is active\n");
+ return -EBUSY;
+ }
+ err = vidioc_try_fmt_vid_cap(file, fh, f);
+ if (0 != err)
+ return err;
+ vv->video_fmt = f->fmt.pix;
+ DEB_EE("set to pixelformat '%4.4s'\n",
+ (char *)&vv->video_fmt.pixelformat);
+ return 0;
+}
+
+static int vidioc_s_fmt_vid_overlay(struct file *file, void *__fh, struct v4l2_format *f)
+{
+ struct saa7146_fh *fh = __fh;
+ struct saa7146_dev *dev = fh->dev;
+ struct saa7146_vv *vv = dev->vv_data;
+ int err;
+
+ DEB_EE("V4L2_BUF_TYPE_VIDEO_OVERLAY: dev:%p, fh:%p\n", dev, fh);
+ err = vidioc_try_fmt_vid_overlay(file, fh, f);
+ if (0 != err)
+ return err;
+ vv->ov.win = f->fmt.win;
+ vv->ov.nclips = f->fmt.win.clipcount;
+ if (vv->ov.nclips > 16)
+ vv->ov.nclips = 16;
+ if (copy_from_user(vv->ov.clips, f->fmt.win.clips,
+ sizeof(struct v4l2_clip) * vv->ov.nclips)) {
+ return -EFAULT;
+ }
+
+ /* vv->ov.fh is used to indicate that we have valid overlay informations, too */
+ vv->ov.fh = fh;
+
+ /* check if our current overlay is active */
+ if (IS_OVERLAY_ACTIVE(fh) != 0) {
+ saa7146_stop_preview(fh);
+ saa7146_start_preview(fh);
+ }
+ return 0;
+}
+
+static int vidioc_g_std(struct file *file, void *fh, v4l2_std_id *norm)
+{
+ struct saa7146_dev *dev = ((struct saa7146_fh *)fh)->dev;
+ struct saa7146_vv *vv = dev->vv_data;
+
+ *norm = vv->standard->id;
+ return 0;
+}
+
+ /* the saa7146 supfhrts (used in conjunction with the saa7111a for example)
+ PAL / NTSC / SECAM. if your hardware does not (or does more)
+ -- override this function in your extension */
+/*
+ case VIDIOC_ENUMSTD:
+ {
+ struct v4l2_standard *e = arg;
+ if (e->index < 0 )
+ return -EINVAL;
+ if( e->index < dev->ext_vv_data->num_stds ) {
+ DEB_EE("VIDIOC_ENUMSTD: index:%d\n", e->index);
+ v4l2_video_std_construct(e, dev->ext_vv_data->stds[e->index].id, dev->ext_vv_data->stds[e->index].name);
+ return 0;
+ }
+ return -EINVAL;
+ }
+ */
+
+static int vidioc_s_std(struct file *file, void *fh, v4l2_std_id id)
+{
+ struct saa7146_dev *dev = ((struct saa7146_fh *)fh)->dev;
+ struct saa7146_vv *vv = dev->vv_data;
+ int found = 0;
+ int err, i;
+
+ DEB_EE("VIDIOC_S_STD\n");
+
+ if ((vv->video_status & STATUS_CAPTURE) == STATUS_CAPTURE) {
+ DEB_D("cannot change video standard while streaming capture is active\n");
+ return -EBUSY;
+ }
+
+ if ((vv->video_status & STATUS_OVERLAY) != 0) {
+ vv->ov_suspend = vv->video_fh;
+ err = saa7146_stop_preview(vv->video_fh); /* side effect: video_status is now 0, video_fh is NULL */
+ if (0 != err) {
+ DEB_D("suspending video failed. aborting\n");
+ return err;
+ }
+ }
+
+ for (i = 0; i < dev->ext_vv_data->num_stds; i++)
+ if (id & dev->ext_vv_data->stds[i].id)
+ break;
+ if (i != dev->ext_vv_data->num_stds) {
+ vv->standard = &dev->ext_vv_data->stds[i];
+ if (NULL != dev->ext_vv_data->std_callback)
+ dev->ext_vv_data->std_callback(dev, vv->standard);
+ found = 1;
+ }
+
+ if (vv->ov_suspend != NULL) {
+ saa7146_start_preview(vv->ov_suspend);
+ vv->ov_suspend = NULL;
+ }
+
+ if (!found) {
+ DEB_EE("VIDIOC_S_STD: standard not found\n");
+ return -EINVAL;
+ }
+
+ DEB_EE("VIDIOC_S_STD: set to standard to '%s'\n", vv->standard->name);
+ return 0;
+}
+
+static int vidioc_overlay(struct file *file, void *fh, unsigned int on)
+{
+ int err;
+
+ DEB_D("VIDIOC_OVERLAY on:%d\n", on);
+ if (on)
+ err = saa7146_start_preview(fh);
+ else
+ err = saa7146_stop_preview(fh);
+ return err;
+}
+
+static int vidioc_reqbufs(struct file *file, void *__fh, struct v4l2_requestbuffers *b)
+{
+ struct saa7146_fh *fh = __fh;
+
+ if (b->type == V4L2_BUF_TYPE_VIDEO_CAPTURE)
+ return videobuf_reqbufs(&fh->video_q, b);
+ if (b->type == V4L2_BUF_TYPE_VBI_CAPTURE)
+ return videobuf_reqbufs(&fh->vbi_q, b);
+ return -EINVAL;
+}
+
+static int vidioc_querybuf(struct file *file, void *__fh, struct v4l2_buffer *buf)
+{
+ struct saa7146_fh *fh = __fh;
+
+ if (buf->type == V4L2_BUF_TYPE_VIDEO_CAPTURE)
+ return videobuf_querybuf(&fh->video_q, buf);
+ if (buf->type == V4L2_BUF_TYPE_VBI_CAPTURE)
+ return videobuf_querybuf(&fh->vbi_q, buf);
+ return -EINVAL;
+}
+
+static int vidioc_qbuf(struct file *file, void *__fh, struct v4l2_buffer *buf)
+{
+ struct saa7146_fh *fh = __fh;
+
+ if (buf->type == V4L2_BUF_TYPE_VIDEO_CAPTURE)
+ return videobuf_qbuf(&fh->video_q, buf);
+ if (buf->type == V4L2_BUF_TYPE_VBI_CAPTURE)
+ return videobuf_qbuf(&fh->vbi_q, buf);
+ return -EINVAL;
+}
+
+static int vidioc_dqbuf(struct file *file, void *__fh, struct v4l2_buffer *buf)
+{
+ struct saa7146_fh *fh = __fh;
+
+ if (buf->type == V4L2_BUF_TYPE_VIDEO_CAPTURE)
+ return videobuf_dqbuf(&fh->video_q, buf, file->f_flags & O_NONBLOCK);
+ if (buf->type == V4L2_BUF_TYPE_VBI_CAPTURE)
+ return videobuf_dqbuf(&fh->vbi_q, buf, file->f_flags & O_NONBLOCK);
+ return -EINVAL;
+}
+
+static int vidioc_streamon(struct file *file, void *__fh, enum v4l2_buf_type type)
+{
+ struct saa7146_fh *fh = __fh;
+ int err;
+
+ DEB_D("VIDIOC_STREAMON, type:%d\n", type);
+
+ err = video_begin(fh);
+ if (err)
+ return err;
+ if (type == V4L2_BUF_TYPE_VIDEO_CAPTURE)
+ return videobuf_streamon(&fh->video_q);
+ if (type == V4L2_BUF_TYPE_VBI_CAPTURE)
+ return videobuf_streamon(&fh->vbi_q);
+ return -EINVAL;
+}
+
+static int vidioc_streamoff(struct file *file, void *__fh, enum v4l2_buf_type type)
+{
+ struct saa7146_fh *fh = __fh;
+ struct saa7146_dev *dev = fh->dev;
+ struct saa7146_vv *vv = dev->vv_data;
+ int err;
+
+ DEB_D("VIDIOC_STREAMOFF, type:%d\n", type);
+
+ /* ugly: we need to copy some checks from video_end(),
+ because videobuf_streamoff() relies on the capture running.
+ check and fix this */
+ if ((vv->video_status & STATUS_CAPTURE) != STATUS_CAPTURE) {
+ DEB_S("not capturing\n");
+ return 0;
+ }
+
+ if (vv->video_fh != fh) {
+ DEB_S("capturing, but in another open\n");
+ return -EBUSY;
+ }
+
+ err = -EINVAL;
+ if (type == V4L2_BUF_TYPE_VIDEO_CAPTURE)
+ err = videobuf_streamoff(&fh->video_q);
+ else if (type == V4L2_BUF_TYPE_VBI_CAPTURE)
+ err = videobuf_streamoff(&fh->vbi_q);
+ if (0 != err) {
+ DEB_D("warning: videobuf_streamoff() failed\n");
+ video_end(fh, file);
+ } else {
+ err = video_end(fh, file);
+ }
+ return err;
+}
+
+const struct v4l2_ioctl_ops saa7146_video_ioctl_ops = {
+ .vidioc_querycap = vidioc_querycap,
+ .vidioc_enum_fmt_vid_cap = vidioc_enum_fmt_vid_cap,
+ .vidioc_enum_fmt_vid_overlay = vidioc_enum_fmt_vid_cap,
+ .vidioc_g_fmt_vid_cap = vidioc_g_fmt_vid_cap,
+ .vidioc_try_fmt_vid_cap = vidioc_try_fmt_vid_cap,
+ .vidioc_s_fmt_vid_cap = vidioc_s_fmt_vid_cap,
+ .vidioc_g_fmt_vid_overlay = vidioc_g_fmt_vid_overlay,
+ .vidioc_try_fmt_vid_overlay = vidioc_try_fmt_vid_overlay,
+ .vidioc_s_fmt_vid_overlay = vidioc_s_fmt_vid_overlay,
+
+ .vidioc_overlay = vidioc_overlay,
+ .vidioc_g_fbuf = vidioc_g_fbuf,
+ .vidioc_s_fbuf = vidioc_s_fbuf,
+ .vidioc_reqbufs = vidioc_reqbufs,
+ .vidioc_querybuf = vidioc_querybuf,
+ .vidioc_qbuf = vidioc_qbuf,
+ .vidioc_dqbuf = vidioc_dqbuf,
+ .vidioc_g_std = vidioc_g_std,
+ .vidioc_s_std = vidioc_s_std,
+ .vidioc_streamon = vidioc_streamon,
+ .vidioc_streamoff = vidioc_streamoff,
+ .vidioc_g_parm = vidioc_g_parm,
+ .vidioc_subscribe_event = v4l2_ctrl_subscribe_event,
+ .vidioc_unsubscribe_event = v4l2_event_unsubscribe,
+};
+
+const struct v4l2_ioctl_ops saa7146_vbi_ioctl_ops = {
+ .vidioc_querycap = vidioc_querycap,
+ .vidioc_g_fmt_vbi_cap = vidioc_g_fmt_vbi_cap,
+
+ .vidioc_reqbufs = vidioc_reqbufs,
+ .vidioc_querybuf = vidioc_querybuf,
+ .vidioc_qbuf = vidioc_qbuf,
+ .vidioc_dqbuf = vidioc_dqbuf,
+ .vidioc_g_std = vidioc_g_std,
+ .vidioc_s_std = vidioc_s_std,
+ .vidioc_streamon = vidioc_streamon,
+ .vidioc_streamoff = vidioc_streamoff,
+ .vidioc_g_parm = vidioc_g_parm,
+ .vidioc_subscribe_event = v4l2_ctrl_subscribe_event,
+ .vidioc_unsubscribe_event = v4l2_event_unsubscribe,
+};
+
+/*********************************************************************************/
+/* buffer handling functions */
+
+static int buffer_activate (struct saa7146_dev *dev,
+ struct saa7146_buf *buf,
+ struct saa7146_buf *next)
+{
+ struct saa7146_vv *vv = dev->vv_data;
+
+ buf->vb.state = VIDEOBUF_ACTIVE;
+ saa7146_set_capture(dev,buf,next);
+
+ mod_timer(&vv->video_dmaq.timeout, jiffies+BUFFER_TIMEOUT);
+ return 0;
+}
+
+static void release_all_pagetables(struct saa7146_dev *dev, struct saa7146_buf *buf)
+{
+ saa7146_pgtable_free(dev->pci, &buf->pt[0]);
+ saa7146_pgtable_free(dev->pci, &buf->pt[1]);
+ saa7146_pgtable_free(dev->pci, &buf->pt[2]);
+}
+
+static int buffer_prepare(struct videobuf_queue *q,
+ struct videobuf_buffer *vb, enum v4l2_field field)
+{
+ struct file *file = q->priv_data;
+ struct saa7146_fh *fh = file->private_data;
+ struct saa7146_dev *dev = fh->dev;
+ struct saa7146_vv *vv = dev->vv_data;
+ struct saa7146_buf *buf = (struct saa7146_buf *)vb;
+ int size,err = 0;
+
+ DEB_CAP("vbuf:%p\n", vb);
+
+ /* sanity checks */
+ if (vv->video_fmt.width < 48 ||
+ vv->video_fmt.height < 32 ||
+ vv->video_fmt.width > vv->standard->h_max_out ||
+ vv->video_fmt.height > vv->standard->v_max_out) {
+ DEB_D("w (%d) / h (%d) out of bounds\n",
+ vv->video_fmt.width, vv->video_fmt.height);
+ return -EINVAL;
+ }
+
+ size = vv->video_fmt.sizeimage;
+ if (0 != buf->vb.baddr && buf->vb.bsize < size) {
+ DEB_D("size mismatch\n");
+ return -EINVAL;
+ }
+
+ DEB_CAP("buffer_prepare [size=%dx%d,bytes=%d,fields=%s]\n",
+ vv->video_fmt.width, vv->video_fmt.height,
+ size, v4l2_field_names[vv->video_fmt.field]);
+ if (buf->vb.width != vv->video_fmt.width ||
+ buf->vb.bytesperline != vv->video_fmt.bytesperline ||
+ buf->vb.height != vv->video_fmt.height ||
+ buf->vb.size != size ||
+ buf->vb.field != field ||
+ buf->vb.field != vv->video_fmt.field ||
+ buf->fmt != &vv->video_fmt) {
+ saa7146_dma_free(dev,q,buf);
+ }
+
+ if (VIDEOBUF_NEEDS_INIT == buf->vb.state) {
+ struct saa7146_format *sfmt;
+
+ buf->vb.bytesperline = vv->video_fmt.bytesperline;
+ buf->vb.width = vv->video_fmt.width;
+ buf->vb.height = vv->video_fmt.height;
+ buf->vb.size = size;
+ buf->vb.field = field;
+ buf->fmt = &vv->video_fmt;
+ buf->vb.field = vv->video_fmt.field;
+
+ sfmt = saa7146_format_by_fourcc(dev,buf->fmt->pixelformat);
+
+ release_all_pagetables(dev, buf);
+ if( 0 != IS_PLANAR(sfmt->trans)) {
+ saa7146_pgtable_alloc(dev->pci, &buf->pt[0]);
+ saa7146_pgtable_alloc(dev->pci, &buf->pt[1]);
+ saa7146_pgtable_alloc(dev->pci, &buf->pt[2]);
+ } else {
+ saa7146_pgtable_alloc(dev->pci, &buf->pt[0]);
+ }
+
+ err = videobuf_iolock(q,&buf->vb, &vv->ov_fb);
+ if (err)
+ goto oops;
+ err = saa7146_pgtable_build(dev,buf);
+ if (err)
+ goto oops;
+ }
+ buf->vb.state = VIDEOBUF_PREPARED;
+ buf->activate = buffer_activate;
+
+ return 0;
+
+ oops:
+ DEB_D("error out\n");
+ saa7146_dma_free(dev,q,buf);
+
+ return err;
+}
+
+static int buffer_setup(struct videobuf_queue *q, unsigned int *count, unsigned int *size)
+{
+ struct file *file = q->priv_data;
+ struct saa7146_fh *fh = file->private_data;
+ struct saa7146_vv *vv = fh->dev->vv_data;
+
+ if (0 == *count || *count > MAX_SAA7146_CAPTURE_BUFFERS)
+ *count = MAX_SAA7146_CAPTURE_BUFFERS;
+
+ *size = vv->video_fmt.sizeimage;
+
+ /* check if we exceed the "max_memory" parameter */
+ if( (*count * *size) > (max_memory*1048576) ) {
+ *count = (max_memory*1048576) / *size;
+ }
+
+ DEB_CAP("%d buffers, %d bytes each\n", *count, *size);
+
+ return 0;
+}
+
+static void buffer_queue(struct videobuf_queue *q, struct videobuf_buffer *vb)
+{
+ struct file *file = q->priv_data;
+ struct saa7146_fh *fh = file->private_data;
+ struct saa7146_dev *dev = fh->dev;
+ struct saa7146_vv *vv = dev->vv_data;
+ struct saa7146_buf *buf = (struct saa7146_buf *)vb;
+
+ DEB_CAP("vbuf:%p\n", vb);
+ saa7146_buffer_queue(fh->dev, &vv->video_dmaq, buf);
+}
+
+static void buffer_release(struct videobuf_queue *q, struct videobuf_buffer *vb)
+{
+ struct file *file = q->priv_data;
+ struct saa7146_fh *fh = file->private_data;
+ struct saa7146_dev *dev = fh->dev;
+ struct saa7146_buf *buf = (struct saa7146_buf *)vb;
+
+ DEB_CAP("vbuf:%p\n", vb);
+
+ saa7146_dma_free(dev,q,buf);
+
+ release_all_pagetables(dev, buf);
+}
+
+static struct videobuf_queue_ops video_qops = {
+ .buf_setup = buffer_setup,
+ .buf_prepare = buffer_prepare,
+ .buf_queue = buffer_queue,
+ .buf_release = buffer_release,
+};
+
+/********************************************************************************/
+/* file operations */
+
+static void video_init(struct saa7146_dev *dev, struct saa7146_vv *vv)
+{
+ INIT_LIST_HEAD(&vv->video_dmaq.queue);
+
+ init_timer(&vv->video_dmaq.timeout);
+ vv->video_dmaq.timeout.function = saa7146_buffer_timeout;
+ vv->video_dmaq.timeout.data = (unsigned long)(&vv->video_dmaq);
+ vv->video_dmaq.dev = dev;
+
+ /* set some default values */
+ vv->standard = &dev->ext_vv_data->stds[0];
+
+ /* FIXME: what's this? */
+ vv->current_hps_source = SAA7146_HPS_SOURCE_PORT_A;
+ vv->current_hps_sync = SAA7146_HPS_SYNC_PORT_A;
+}
+
+
+static int video_open(struct saa7146_dev *dev, struct file *file)
+{
+ struct saa7146_fh *fh = file->private_data;
+
+ videobuf_queue_sg_init(&fh->video_q, &video_qops,
+ &dev->pci->dev, &dev->slock,
+ V4L2_BUF_TYPE_VIDEO_CAPTURE,
+ V4L2_FIELD_INTERLACED,
+ sizeof(struct saa7146_buf),
+ file, &dev->v4l2_lock);
+
+ return 0;
+}
+
+
+static void video_close(struct saa7146_dev *dev, struct file *file)
+{
+ struct saa7146_fh *fh = file->private_data;
+ struct saa7146_vv *vv = dev->vv_data;
+ struct videobuf_queue *q = &fh->video_q;
+
+ if (IS_CAPTURE_ACTIVE(fh) != 0)
+ video_end(fh, file);
+ else if (IS_OVERLAY_ACTIVE(fh) != 0)
+ saa7146_stop_preview(fh);
+
+ videobuf_stop(q);
+ /* hmm, why is this function declared void? */
+}
+
+
+static void video_irq_done(struct saa7146_dev *dev, unsigned long st)
+{
+ struct saa7146_vv *vv = dev->vv_data;
+ struct saa7146_dmaqueue *q = &vv->video_dmaq;
+
+ spin_lock(&dev->slock);
+ DEB_CAP("called\n");
+
+ /* only finish the buffer if we have one... */
+ if( NULL != q->curr ) {
+ saa7146_buffer_finish(dev,q,VIDEOBUF_DONE);
+ }
+ saa7146_buffer_next(dev,q,0);
+
+ spin_unlock(&dev->slock);
+}
+
+static ssize_t video_read(struct file *file, char __user *data, size_t count, loff_t *ppos)
+{
+ struct saa7146_fh *fh = file->private_data;
+ struct saa7146_dev *dev = fh->dev;
+ struct saa7146_vv *vv = dev->vv_data;
+ ssize_t ret = 0;
+
+ DEB_EE("called\n");
+
+ if ((vv->video_status & STATUS_CAPTURE) != 0) {
+ /* fixme: should we allow read() captures while streaming capture? */
+ if (vv->video_fh == fh) {
+ DEB_S("already capturing\n");
+ return -EBUSY;
+ }
+ DEB_S("already capturing in another open\n");
+ return -EBUSY;
+ }
+
+ ret = video_begin(fh);
+ if( 0 != ret) {
+ goto out;
+ }
+
+ ret = videobuf_read_one(&fh->video_q , data, count, ppos,
+ file->f_flags & O_NONBLOCK);
+ if (ret != 0) {
+ video_end(fh, file);
+ } else {
+ ret = video_end(fh, file);
+ }
+out:
+ /* restart overlay if it was active before */
+ if (vv->ov_suspend != NULL) {
+ saa7146_start_preview(vv->ov_suspend);
+ vv->ov_suspend = NULL;
+ }
+
+ return ret;
+}
+
+struct saa7146_use_ops saa7146_video_uops = {
+ .init = video_init,
+ .open = video_open,
+ .release = video_close,
+ .irq_done = video_irq_done,
+ .read = video_read,
+};