summaryrefslogtreecommitdiffstats
path: root/kernel/drivers/lguest/interrupts_and_traps.c
diff options
context:
space:
mode:
Diffstat (limited to 'kernel/drivers/lguest/interrupts_and_traps.c')
-rw-r--r--kernel/drivers/lguest/interrupts_and_traps.c702
1 files changed, 702 insertions, 0 deletions
diff --git a/kernel/drivers/lguest/interrupts_and_traps.c b/kernel/drivers/lguest/interrupts_and_traps.c
new file mode 100644
index 000000000..5e7559be2
--- /dev/null
+++ b/kernel/drivers/lguest/interrupts_and_traps.c
@@ -0,0 +1,702 @@
+/*P:800
+ * Interrupts (traps) are complicated enough to earn their own file.
+ * There are three classes of interrupts:
+ *
+ * 1) Real hardware interrupts which occur while we're running the Guest,
+ * 2) Interrupts for virtual devices attached to the Guest, and
+ * 3) Traps and faults from the Guest.
+ *
+ * Real hardware interrupts must be delivered to the Host, not the Guest.
+ * Virtual interrupts must be delivered to the Guest, but we make them look
+ * just like real hardware would deliver them. Traps from the Guest can be set
+ * up to go directly back into the Guest, but sometimes the Host wants to see
+ * them first, so we also have a way of "reflecting" them into the Guest as if
+ * they had been delivered to it directly.
+:*/
+#include <linux/uaccess.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/sched.h>
+#include "lg.h"
+
+/* Allow Guests to use a non-128 (ie. non-Linux) syscall trap. */
+static unsigned int syscall_vector = SYSCALL_VECTOR;
+module_param(syscall_vector, uint, 0444);
+
+/* The address of the interrupt handler is split into two bits: */
+static unsigned long idt_address(u32 lo, u32 hi)
+{
+ return (lo & 0x0000FFFF) | (hi & 0xFFFF0000);
+}
+
+/*
+ * The "type" of the interrupt handler is a 4 bit field: we only support a
+ * couple of types.
+ */
+static int idt_type(u32 lo, u32 hi)
+{
+ return (hi >> 8) & 0xF;
+}
+
+/* An IDT entry can't be used unless the "present" bit is set. */
+static bool idt_present(u32 lo, u32 hi)
+{
+ return (hi & 0x8000);
+}
+
+/*
+ * We need a helper to "push" a value onto the Guest's stack, since that's a
+ * big part of what delivering an interrupt does.
+ */
+static void push_guest_stack(struct lg_cpu *cpu, unsigned long *gstack, u32 val)
+{
+ /* Stack grows upwards: move stack then write value. */
+ *gstack -= 4;
+ lgwrite(cpu, *gstack, u32, val);
+}
+
+/*H:210
+ * The push_guest_interrupt_stack() routine saves Guest state on the stack for
+ * an interrupt or trap. The mechanics of delivering traps and interrupts to
+ * the Guest are the same, except some traps have an "error code" which gets
+ * pushed onto the stack as well: the caller tells us if this is one.
+ *
+ * We set up the stack just like the CPU does for a real interrupt, so it's
+ * identical for the Guest (and the standard "iret" instruction will undo
+ * it).
+ */
+static void push_guest_interrupt_stack(struct lg_cpu *cpu, bool has_err)
+{
+ unsigned long gstack, origstack;
+ u32 eflags, ss, irq_enable;
+ unsigned long virtstack;
+
+ /*
+ * There are two cases for interrupts: one where the Guest is already
+ * in the kernel, and a more complex one where the Guest is in
+ * userspace. We check the privilege level to find out.
+ */
+ if ((cpu->regs->ss&0x3) != GUEST_PL) {
+ /*
+ * The Guest told us their kernel stack with the SET_STACK
+ * hypercall: both the virtual address and the segment.
+ */
+ virtstack = cpu->esp1;
+ ss = cpu->ss1;
+
+ origstack = gstack = guest_pa(cpu, virtstack);
+ /*
+ * We push the old stack segment and pointer onto the new
+ * stack: when the Guest does an "iret" back from the interrupt
+ * handler the CPU will notice they're dropping privilege
+ * levels and expect these here.
+ */
+ push_guest_stack(cpu, &gstack, cpu->regs->ss);
+ push_guest_stack(cpu, &gstack, cpu->regs->esp);
+ } else {
+ /* We're staying on the same Guest (kernel) stack. */
+ virtstack = cpu->regs->esp;
+ ss = cpu->regs->ss;
+
+ origstack = gstack = guest_pa(cpu, virtstack);
+ }
+
+ /*
+ * Remember that we never let the Guest actually disable interrupts, so
+ * the "Interrupt Flag" bit is always set. We copy that bit from the
+ * Guest's "irq_enabled" field into the eflags word: we saw the Guest
+ * copy it back in "lguest_iret".
+ */
+ eflags = cpu->regs->eflags;
+ if (get_user(irq_enable, &cpu->lg->lguest_data->irq_enabled) == 0
+ && !(irq_enable & X86_EFLAGS_IF))
+ eflags &= ~X86_EFLAGS_IF;
+
+ /*
+ * An interrupt is expected to push three things on the stack: the old
+ * "eflags" word, the old code segment, and the old instruction
+ * pointer.
+ */
+ push_guest_stack(cpu, &gstack, eflags);
+ push_guest_stack(cpu, &gstack, cpu->regs->cs);
+ push_guest_stack(cpu, &gstack, cpu->regs->eip);
+
+ /* For the six traps which supply an error code, we push that, too. */
+ if (has_err)
+ push_guest_stack(cpu, &gstack, cpu->regs->errcode);
+
+ /* Adjust the stack pointer and stack segment. */
+ cpu->regs->ss = ss;
+ cpu->regs->esp = virtstack + (gstack - origstack);
+}
+
+/*
+ * This actually makes the Guest start executing the given interrupt/trap
+ * handler.
+ *
+ * "lo" and "hi" are the two parts of the Interrupt Descriptor Table for this
+ * interrupt or trap. It's split into two parts for traditional reasons: gcc
+ * on i386 used to be frightened by 64 bit numbers.
+ */
+static void guest_run_interrupt(struct lg_cpu *cpu, u32 lo, u32 hi)
+{
+ /* If we're already in the kernel, we don't change stacks. */
+ if ((cpu->regs->ss&0x3) != GUEST_PL)
+ cpu->regs->ss = cpu->esp1;
+
+ /*
+ * Set the code segment and the address to execute.
+ */
+ cpu->regs->cs = (__KERNEL_CS|GUEST_PL);
+ cpu->regs->eip = idt_address(lo, hi);
+
+ /*
+ * Trapping always clears these flags:
+ * TF: Trap flag
+ * VM: Virtual 8086 mode
+ * RF: Resume
+ * NT: Nested task.
+ */
+ cpu->regs->eflags &=
+ ~(X86_EFLAGS_TF|X86_EFLAGS_VM|X86_EFLAGS_RF|X86_EFLAGS_NT);
+
+ /*
+ * There are two kinds of interrupt handlers: 0xE is an "interrupt
+ * gate" which expects interrupts to be disabled on entry.
+ */
+ if (idt_type(lo, hi) == 0xE)
+ if (put_user(0, &cpu->lg->lguest_data->irq_enabled))
+ kill_guest(cpu, "Disabling interrupts");
+}
+
+/* This restores the eflags word which was pushed on the stack by a trap */
+static void restore_eflags(struct lg_cpu *cpu)
+{
+ /* This is the physical address of the stack. */
+ unsigned long stack_pa = guest_pa(cpu, cpu->regs->esp);
+
+ /*
+ * Stack looks like this:
+ * Address Contents
+ * esp EIP
+ * esp + 4 CS
+ * esp + 8 EFLAGS
+ */
+ cpu->regs->eflags = lgread(cpu, stack_pa + 8, u32);
+ cpu->regs->eflags &=
+ ~(X86_EFLAGS_TF|X86_EFLAGS_VM|X86_EFLAGS_RF|X86_EFLAGS_NT);
+}
+
+/*H:205
+ * Virtual Interrupts.
+ *
+ * interrupt_pending() returns the first pending interrupt which isn't blocked
+ * by the Guest. It is called before every entry to the Guest, and just before
+ * we go to sleep when the Guest has halted itself.
+ */
+unsigned int interrupt_pending(struct lg_cpu *cpu, bool *more)
+{
+ unsigned int irq;
+ DECLARE_BITMAP(blk, LGUEST_IRQS);
+
+ /* If the Guest hasn't even initialized yet, we can do nothing. */
+ if (!cpu->lg->lguest_data)
+ return LGUEST_IRQS;
+
+ /*
+ * Take our "irqs_pending" array and remove any interrupts the Guest
+ * wants blocked: the result ends up in "blk".
+ */
+ if (copy_from_user(&blk, cpu->lg->lguest_data->blocked_interrupts,
+ sizeof(blk)))
+ return LGUEST_IRQS;
+ bitmap_andnot(blk, cpu->irqs_pending, blk, LGUEST_IRQS);
+
+ /* Find the first interrupt. */
+ irq = find_first_bit(blk, LGUEST_IRQS);
+ *more = find_next_bit(blk, LGUEST_IRQS, irq+1);
+
+ return irq;
+}
+
+/*
+ * This actually diverts the Guest to running an interrupt handler, once an
+ * interrupt has been identified by interrupt_pending().
+ */
+void try_deliver_interrupt(struct lg_cpu *cpu, unsigned int irq, bool more)
+{
+ struct desc_struct *idt;
+
+ BUG_ON(irq >= LGUEST_IRQS);
+
+ /* If they're halted, interrupts restart them. */
+ if (cpu->halted) {
+ /* Re-enable interrupts. */
+ if (put_user(X86_EFLAGS_IF, &cpu->lg->lguest_data->irq_enabled))
+ kill_guest(cpu, "Re-enabling interrupts");
+ cpu->halted = 0;
+ } else {
+ /* Otherwise we check if they have interrupts disabled. */
+ u32 irq_enabled;
+ if (get_user(irq_enabled, &cpu->lg->lguest_data->irq_enabled))
+ irq_enabled = 0;
+ if (!irq_enabled) {
+ /* Make sure they know an IRQ is pending. */
+ put_user(X86_EFLAGS_IF,
+ &cpu->lg->lguest_data->irq_pending);
+ return;
+ }
+ }
+
+ /*
+ * Look at the IDT entry the Guest gave us for this interrupt. The
+ * first 32 (FIRST_EXTERNAL_VECTOR) entries are for traps, so we skip
+ * over them.
+ */
+ idt = &cpu->arch.idt[FIRST_EXTERNAL_VECTOR+irq];
+ /* If they don't have a handler (yet?), we just ignore it */
+ if (idt_present(idt->a, idt->b)) {
+ /* OK, mark it no longer pending and deliver it. */
+ clear_bit(irq, cpu->irqs_pending);
+
+ /*
+ * They may be about to iret, where they asked us never to
+ * deliver interrupts. In this case, we can emulate that iret
+ * then immediately deliver the interrupt. This is basically
+ * a noop: the iret would pop the interrupt frame and restore
+ * eflags, and then we'd set it up again. So just restore the
+ * eflags word and jump straight to the handler in this case.
+ *
+ * Denys Vlasenko points out that this isn't quite right: if
+ * the iret was returning to userspace, then that interrupt
+ * would reset the stack pointer (which the Guest told us
+ * about via LHCALL_SET_STACK). But unless the Guest is being
+ * *really* weird, that will be the same as the current stack
+ * anyway.
+ */
+ if (cpu->regs->eip == cpu->lg->noirq_iret) {
+ restore_eflags(cpu);
+ } else {
+ /*
+ * set_guest_interrupt() takes a flag to say whether
+ * this interrupt pushes an error code onto the stack
+ * as well: virtual interrupts never do.
+ */
+ push_guest_interrupt_stack(cpu, false);
+ }
+ /* Actually make Guest cpu jump to handler. */
+ guest_run_interrupt(cpu, idt->a, idt->b);
+ }
+
+ /*
+ * Every time we deliver an interrupt, we update the timestamp in the
+ * Guest's lguest_data struct. It would be better for the Guest if we
+ * did this more often, but it can actually be quite slow: doing it
+ * here is a compromise which means at least it gets updated every
+ * timer interrupt.
+ */
+ write_timestamp(cpu);
+
+ /*
+ * If there are no other interrupts we want to deliver, clear
+ * the pending flag.
+ */
+ if (!more)
+ put_user(0, &cpu->lg->lguest_data->irq_pending);
+}
+
+/* And this is the routine when we want to set an interrupt for the Guest. */
+void set_interrupt(struct lg_cpu *cpu, unsigned int irq)
+{
+ /*
+ * Next time the Guest runs, the core code will see if it can deliver
+ * this interrupt.
+ */
+ set_bit(irq, cpu->irqs_pending);
+
+ /*
+ * Make sure it sees it; it might be asleep (eg. halted), or running
+ * the Guest right now, in which case kick_process() will knock it out.
+ */
+ if (!wake_up_process(cpu->tsk))
+ kick_process(cpu->tsk);
+}
+/*:*/
+
+/*
+ * Linux uses trap 128 for system calls. Plan9 uses 64, and Ron Minnich sent
+ * me a patch, so we support that too. It'd be a big step for lguest if half
+ * the Plan 9 user base were to start using it.
+ *
+ * Actually now I think of it, it's possible that Ron *is* half the Plan 9
+ * userbase. Oh well.
+ */
+static bool could_be_syscall(unsigned int num)
+{
+ /* Normal Linux SYSCALL_VECTOR or reserved vector? */
+ return num == SYSCALL_VECTOR || num == syscall_vector;
+}
+
+/* The syscall vector it wants must be unused by Host. */
+bool check_syscall_vector(struct lguest *lg)
+{
+ u32 vector;
+
+ if (get_user(vector, &lg->lguest_data->syscall_vec))
+ return false;
+
+ return could_be_syscall(vector);
+}
+
+int init_interrupts(void)
+{
+ /* If they want some strange system call vector, reserve it now */
+ if (syscall_vector != SYSCALL_VECTOR) {
+ if (test_bit(syscall_vector, used_vectors) ||
+ vector_used_by_percpu_irq(syscall_vector)) {
+ printk(KERN_ERR "lg: couldn't reserve syscall %u\n",
+ syscall_vector);
+ return -EBUSY;
+ }
+ set_bit(syscall_vector, used_vectors);
+ }
+
+ return 0;
+}
+
+void free_interrupts(void)
+{
+ if (syscall_vector != SYSCALL_VECTOR)
+ clear_bit(syscall_vector, used_vectors);
+}
+
+/*H:220
+ * Now we've got the routines to deliver interrupts, delivering traps like
+ * page fault is easy. The only trick is that Intel decided that some traps
+ * should have error codes:
+ */
+static bool has_err(unsigned int trap)
+{
+ return (trap == 8 || (trap >= 10 && trap <= 14) || trap == 17);
+}
+
+/* deliver_trap() returns true if it could deliver the trap. */
+bool deliver_trap(struct lg_cpu *cpu, unsigned int num)
+{
+ /*
+ * Trap numbers are always 8 bit, but we set an impossible trap number
+ * for traps inside the Switcher, so check that here.
+ */
+ if (num >= ARRAY_SIZE(cpu->arch.idt))
+ return false;
+
+ /*
+ * Early on the Guest hasn't set the IDT entries (or maybe it put a
+ * bogus one in): if we fail here, the Guest will be killed.
+ */
+ if (!idt_present(cpu->arch.idt[num].a, cpu->arch.idt[num].b))
+ return false;
+ push_guest_interrupt_stack(cpu, has_err(num));
+ guest_run_interrupt(cpu, cpu->arch.idt[num].a,
+ cpu->arch.idt[num].b);
+ return true;
+}
+
+/*H:250
+ * Here's the hard part: returning to the Host every time a trap happens
+ * and then calling deliver_trap() and re-entering the Guest is slow.
+ * Particularly because Guest userspace system calls are traps (usually trap
+ * 128).
+ *
+ * So we'd like to set up the IDT to tell the CPU to deliver traps directly
+ * into the Guest. This is possible, but the complexities cause the size of
+ * this file to double! However, 150 lines of code is worth writing for taking
+ * system calls down from 1750ns to 270ns. Plus, if lguest didn't do it, all
+ * the other hypervisors would beat it up at lunchtime.
+ *
+ * This routine indicates if a particular trap number could be delivered
+ * directly.
+ */
+static bool direct_trap(unsigned int num)
+{
+ /*
+ * Hardware interrupts don't go to the Guest at all (except system
+ * call).
+ */
+ if (num >= FIRST_EXTERNAL_VECTOR && !could_be_syscall(num))
+ return false;
+
+ /*
+ * The Host needs to see page faults (for shadow paging and to save the
+ * fault address), general protection faults (in/out emulation) and
+ * device not available (TS handling) and of course, the hypercall trap.
+ */
+ return num != 14 && num != 13 && num != 7 && num != LGUEST_TRAP_ENTRY;
+}
+/*:*/
+
+/*M:005
+ * The Guest has the ability to turn its interrupt gates into trap gates,
+ * if it is careful. The Host will let trap gates can go directly to the
+ * Guest, but the Guest needs the interrupts atomically disabled for an
+ * interrupt gate. The Host could provide a mechanism to register more
+ * "no-interrupt" regions, and the Guest could point the trap gate at
+ * instructions within that region, where it can safely disable interrupts.
+ */
+
+/*M:006
+ * The Guests do not use the sysenter (fast system call) instruction,
+ * because it's hardcoded to enter privilege level 0 and so can't go direct.
+ * It's about twice as fast as the older "int 0x80" system call, so it might
+ * still be worthwhile to handle it in the Switcher and lcall down to the
+ * Guest. The sysenter semantics are hairy tho: search for that keyword in
+ * entry.S
+:*/
+
+/*H:260
+ * When we make traps go directly into the Guest, we need to make sure
+ * the kernel stack is valid (ie. mapped in the page tables). Otherwise, the
+ * CPU trying to deliver the trap will fault while trying to push the interrupt
+ * words on the stack: this is called a double fault, and it forces us to kill
+ * the Guest.
+ *
+ * Which is deeply unfair, because (literally!) it wasn't the Guests' fault.
+ */
+void pin_stack_pages(struct lg_cpu *cpu)
+{
+ unsigned int i;
+
+ /*
+ * Depending on the CONFIG_4KSTACKS option, the Guest can have one or
+ * two pages of stack space.
+ */
+ for (i = 0; i < cpu->lg->stack_pages; i++)
+ /*
+ * The stack grows *upwards*, so the address we're given is the
+ * start of the page after the kernel stack. Subtract one to
+ * get back onto the first stack page, and keep subtracting to
+ * get to the rest of the stack pages.
+ */
+ pin_page(cpu, cpu->esp1 - 1 - i * PAGE_SIZE);
+}
+
+/*
+ * Direct traps also mean that we need to know whenever the Guest wants to use
+ * a different kernel stack, so we can change the guest TSS to use that
+ * stack. The TSS entries expect a virtual address, so unlike most addresses
+ * the Guest gives us, the "esp" (stack pointer) value here is virtual, not
+ * physical.
+ *
+ * In Linux each process has its own kernel stack, so this happens a lot: we
+ * change stacks on each context switch.
+ */
+void guest_set_stack(struct lg_cpu *cpu, u32 seg, u32 esp, unsigned int pages)
+{
+ /*
+ * You're not allowed a stack segment with privilege level 0: bad Guest!
+ */
+ if ((seg & 0x3) != GUEST_PL)
+ kill_guest(cpu, "bad stack segment %i", seg);
+ /* We only expect one or two stack pages. */
+ if (pages > 2)
+ kill_guest(cpu, "bad stack pages %u", pages);
+ /* Save where the stack is, and how many pages */
+ cpu->ss1 = seg;
+ cpu->esp1 = esp;
+ cpu->lg->stack_pages = pages;
+ /* Make sure the new stack pages are mapped */
+ pin_stack_pages(cpu);
+}
+
+/*
+ * All this reference to mapping stacks leads us neatly into the other complex
+ * part of the Host: page table handling.
+ */
+
+/*H:235
+ * This is the routine which actually checks the Guest's IDT entry and
+ * transfers it into the entry in "struct lguest":
+ */
+static void set_trap(struct lg_cpu *cpu, struct desc_struct *trap,
+ unsigned int num, u32 lo, u32 hi)
+{
+ u8 type = idt_type(lo, hi);
+
+ /* We zero-out a not-present entry */
+ if (!idt_present(lo, hi)) {
+ trap->a = trap->b = 0;
+ return;
+ }
+
+ /* We only support interrupt and trap gates. */
+ if (type != 0xE && type != 0xF)
+ kill_guest(cpu, "bad IDT type %i", type);
+
+ /*
+ * We only copy the handler address, present bit, privilege level and
+ * type. The privilege level controls where the trap can be triggered
+ * manually with an "int" instruction. This is usually GUEST_PL,
+ * except for system calls which userspace can use.
+ */
+ trap->a = ((__KERNEL_CS|GUEST_PL)<<16) | (lo&0x0000FFFF);
+ trap->b = (hi&0xFFFFEF00);
+}
+
+/*H:230
+ * While we're here, dealing with delivering traps and interrupts to the
+ * Guest, we might as well complete the picture: how the Guest tells us where
+ * it wants them to go. This would be simple, except making traps fast
+ * requires some tricks.
+ *
+ * We saw the Guest setting Interrupt Descriptor Table (IDT) entries with the
+ * LHCALL_LOAD_IDT_ENTRY hypercall before: that comes here.
+ */
+void load_guest_idt_entry(struct lg_cpu *cpu, unsigned int num, u32 lo, u32 hi)
+{
+ /*
+ * Guest never handles: NMI, doublefault, spurious interrupt or
+ * hypercall. We ignore when it tries to set them.
+ */
+ if (num == 2 || num == 8 || num == 15 || num == LGUEST_TRAP_ENTRY)
+ return;
+
+ /*
+ * Mark the IDT as changed: next time the Guest runs we'll know we have
+ * to copy this again.
+ */
+ cpu->changed |= CHANGED_IDT;
+
+ /* Check that the Guest doesn't try to step outside the bounds. */
+ if (num >= ARRAY_SIZE(cpu->arch.idt))
+ kill_guest(cpu, "Setting idt entry %u", num);
+ else
+ set_trap(cpu, &cpu->arch.idt[num], num, lo, hi);
+}
+
+/*
+ * The default entry for each interrupt points into the Switcher routines which
+ * simply return to the Host. The run_guest() loop will then call
+ * deliver_trap() to bounce it back into the Guest.
+ */
+static void default_idt_entry(struct desc_struct *idt,
+ int trap,
+ const unsigned long handler,
+ const struct desc_struct *base)
+{
+ /* A present interrupt gate. */
+ u32 flags = 0x8e00;
+
+ /*
+ * Set the privilege level on the entry for the hypercall: this allows
+ * the Guest to use the "int" instruction to trigger it.
+ */
+ if (trap == LGUEST_TRAP_ENTRY)
+ flags |= (GUEST_PL << 13);
+ else if (base)
+ /*
+ * Copy privilege level from what Guest asked for. This allows
+ * debug (int 3) traps from Guest userspace, for example.
+ */
+ flags |= (base->b & 0x6000);
+
+ /* Now pack it into the IDT entry in its weird format. */
+ idt->a = (LGUEST_CS<<16) | (handler&0x0000FFFF);
+ idt->b = (handler&0xFFFF0000) | flags;
+}
+
+/* When the Guest first starts, we put default entries into the IDT. */
+void setup_default_idt_entries(struct lguest_ro_state *state,
+ const unsigned long *def)
+{
+ unsigned int i;
+
+ for (i = 0; i < ARRAY_SIZE(state->guest_idt); i++)
+ default_idt_entry(&state->guest_idt[i], i, def[i], NULL);
+}
+
+/*H:240
+ * We don't use the IDT entries in the "struct lguest" directly, instead
+ * we copy them into the IDT which we've set up for Guests on this CPU, just
+ * before we run the Guest. This routine does that copy.
+ */
+void copy_traps(const struct lg_cpu *cpu, struct desc_struct *idt,
+ const unsigned long *def)
+{
+ unsigned int i;
+
+ /*
+ * We can simply copy the direct traps, otherwise we use the default
+ * ones in the Switcher: they will return to the Host.
+ */
+ for (i = 0; i < ARRAY_SIZE(cpu->arch.idt); i++) {
+ const struct desc_struct *gidt = &cpu->arch.idt[i];
+
+ /* If no Guest can ever override this trap, leave it alone. */
+ if (!direct_trap(i))
+ continue;
+
+ /*
+ * Only trap gates (type 15) can go direct to the Guest.
+ * Interrupt gates (type 14) disable interrupts as they are
+ * entered, which we never let the Guest do. Not present
+ * entries (type 0x0) also can't go direct, of course.
+ *
+ * If it can't go direct, we still need to copy the priv. level:
+ * they might want to give userspace access to a software
+ * interrupt.
+ */
+ if (idt_type(gidt->a, gidt->b) == 0xF)
+ idt[i] = *gidt;
+ else
+ default_idt_entry(&idt[i], i, def[i], gidt);
+ }
+}
+
+/*H:200
+ * The Guest Clock.
+ *
+ * There are two sources of virtual interrupts. We saw one in lguest_user.c:
+ * the Launcher sending interrupts for virtual devices. The other is the Guest
+ * timer interrupt.
+ *
+ * The Guest uses the LHCALL_SET_CLOCKEVENT hypercall to tell us how long to
+ * the next timer interrupt (in nanoseconds). We use the high-resolution timer
+ * infrastructure to set a callback at that time.
+ *
+ * 0 means "turn off the clock".
+ */
+void guest_set_clockevent(struct lg_cpu *cpu, unsigned long delta)
+{
+ ktime_t expires;
+
+ if (unlikely(delta == 0)) {
+ /* Clock event device is shutting down. */
+ hrtimer_cancel(&cpu->hrt);
+ return;
+ }
+
+ /*
+ * We use wallclock time here, so the Guest might not be running for
+ * all the time between now and the timer interrupt it asked for. This
+ * is almost always the right thing to do.
+ */
+ expires = ktime_add_ns(ktime_get_real(), delta);
+ hrtimer_start(&cpu->hrt, expires, HRTIMER_MODE_ABS);
+}
+
+/* This is the function called when the Guest's timer expires. */
+static enum hrtimer_restart clockdev_fn(struct hrtimer *timer)
+{
+ struct lg_cpu *cpu = container_of(timer, struct lg_cpu, hrt);
+
+ /* Remember the first interrupt is the timer interrupt. */
+ set_interrupt(cpu, 0);
+ return HRTIMER_NORESTART;
+}
+
+/* This sets up the timer for this Guest. */
+void init_clockdev(struct lg_cpu *cpu)
+{
+ hrtimer_init(&cpu->hrt, CLOCK_REALTIME, HRTIMER_MODE_ABS);
+ cpu->hrt.function = clockdev_fn;
+}