summaryrefslogtreecommitdiffstats
path: root/kernel/drivers/leds
diff options
context:
space:
mode:
Diffstat (limited to 'kernel/drivers/leds')
-rw-r--r--kernel/drivers/leds/Kconfig540
-rw-r--r--kernel/drivers/leds/Makefile67
-rw-r--r--kernel/drivers/leds/dell-led.c359
-rw-r--r--kernel/drivers/leds/led-class-flash.c404
-rw-r--r--kernel/drivers/leds/led-class.c402
-rw-r--r--kernel/drivers/leds/led-core.c175
-rw-r--r--kernel/drivers/leds/led-triggers.c342
-rw-r--r--kernel/drivers/leds/leds-88pm860x.c250
-rw-r--r--kernel/drivers/leds/leds-adp5520.c214
-rw-r--r--kernel/drivers/leds/leds-asic3.c180
-rw-r--r--kernel/drivers/leds/leds-bd2802.c809
-rw-r--r--kernel/drivers/leds/leds-blinkm.c811
-rw-r--r--kernel/drivers/leds/leds-clevo-mail.c216
-rw-r--r--kernel/drivers/leds/leds-cobalt-qube.c87
-rw-r--r--kernel/drivers/leds/leds-cobalt-raq.c135
-rw-r--r--kernel/drivers/leds/leds-da903x.c158
-rw-r--r--kernel/drivers/leds/leds-da9052.c211
-rw-r--r--kernel/drivers/leds/leds-dac124s085.c134
-rw-r--r--kernel/drivers/leds/leds-fsg.c225
-rw-r--r--kernel/drivers/leds/leds-gpio-register.c45
-rw-r--r--kernel/drivers/leds/leds-gpio.c304
-rw-r--r--kernel/drivers/leds/leds-hp6xx.c94
-rw-r--r--kernel/drivers/leds/leds-ipaq-micro.c141
-rw-r--r--kernel/drivers/leds/leds-lm3530.c503
-rw-r--r--kernel/drivers/leds/leds-lm3533.c779
-rw-r--r--kernel/drivers/leds/leds-lm355x.c571
-rw-r--r--kernel/drivers/leds/leds-lm3642.c462
-rw-r--r--kernel/drivers/leds/leds-locomo.c97
-rw-r--r--kernel/drivers/leds/leds-lp3944.c459
-rw-r--r--kernel/drivers/leds/leds-lp5521.c617
-rw-r--r--kernel/drivers/leds/leds-lp5523.c839
-rw-r--r--kernel/drivers/leds/leds-lp5562.c617
-rw-r--r--kernel/drivers/leds/leds-lp55xx-common.c599
-rw-r--r--kernel/drivers/leds/leds-lp55xx-common.h208
-rw-r--r--kernel/drivers/leds/leds-lp8501.c411
-rw-r--r--kernel/drivers/leds/leds-lp8788.c193
-rw-r--r--kernel/drivers/leds/leds-lp8860.c493
-rw-r--r--kernel/drivers/leds/leds-lt3593.c195
-rw-r--r--kernel/drivers/leds/leds-max8997.c316
-rw-r--r--kernel/drivers/leds/leds-mc13783.c334
-rw-r--r--kernel/drivers/leds/leds-menf21bmc.c130
-rw-r--r--kernel/drivers/leds/leds-net48xx.c96
-rw-r--r--kernel/drivers/leds/leds-netxbig.c415
-rw-r--r--kernel/drivers/leds/leds-ns2.c392
-rw-r--r--kernel/drivers/leds/leds-ot200.c169
-rw-r--r--kernel/drivers/leds/leds-pca9532.c483
-rw-r--r--kernel/drivers/leds/leds-pca955x.c393
-rw-r--r--kernel/drivers/leds/leds-pca963x.c473
-rw-r--r--kernel/drivers/leds/leds-pm8941-wled.c435
-rw-r--r--kernel/drivers/leds/leds-pwm.c241
-rw-r--r--kernel/drivers/leds/leds-rb532.c64
-rw-r--r--kernel/drivers/leds/leds-regulator.c226
-rw-r--r--kernel/drivers/leds/leds-s3c24xx.c127
-rw-r--r--kernel/drivers/leds/leds-ss4200.c560
-rw-r--r--kernel/drivers/leds/leds-sunfire.c262
-rw-r--r--kernel/drivers/leds/leds-syscon.c167
-rw-r--r--kernel/drivers/leds/leds-tca6507.c845
-rw-r--r--kernel/drivers/leds/leds-versatile.c110
-rw-r--r--kernel/drivers/leds/leds-wm831x-status.c325
-rw-r--r--kernel/drivers/leds/leds-wm8350.c286
-rw-r--r--kernel/drivers/leds/leds-wrap.c153
-rw-r--r--kernel/drivers/leds/leds.h76
-rw-r--r--kernel/drivers/leds/trigger/Kconfig111
-rw-r--r--kernel/drivers/leds/trigger/Makefile10
-rw-r--r--kernel/drivers/leds/trigger/ledtrig-backlight.c168
-rw-r--r--kernel/drivers/leds/trigger/ledtrig-camera.c57
-rw-r--r--kernel/drivers/leds/trigger/ledtrig-cpu.c166
-rw-r--r--kernel/drivers/leds/trigger/ledtrig-default-on.c45
-rw-r--r--kernel/drivers/leds/trigger/ledtrig-gpio.c253
-rw-r--r--kernel/drivers/leds/trigger/ledtrig-heartbeat.c161
-rw-r--r--kernel/drivers/leds/trigger/ledtrig-ide-disk.c47
-rw-r--r--kernel/drivers/leds/trigger/ledtrig-oneshot.c204
-rw-r--r--kernel/drivers/leds/trigger/ledtrig-timer.c130
-rw-r--r--kernel/drivers/leds/trigger/ledtrig-transient.c239
74 files changed, 22015 insertions, 0 deletions
diff --git a/kernel/drivers/leds/Kconfig b/kernel/drivers/leds/Kconfig
new file mode 100644
index 000000000..966b9605f
--- /dev/null
+++ b/kernel/drivers/leds/Kconfig
@@ -0,0 +1,540 @@
+config LEDS_GPIO_REGISTER
+ bool
+ help
+ This option provides the function gpio_led_register_device.
+ As this function is used by arch code it must not be compiled as a
+ module.
+
+menuconfig NEW_LEDS
+ bool "LED Support"
+ help
+ Say Y to enable Linux LED support. This allows control of supported
+ LEDs from both userspace and optionally, by kernel events (triggers).
+
+ This is not related to standard keyboard LEDs which are controlled
+ via the input system.
+
+if NEW_LEDS
+
+config LEDS_CLASS
+ tristate "LED Class Support"
+ help
+ This option enables the led sysfs class in /sys/class/leds. You'll
+ need this to do anything useful with LEDs. If unsure, say N.
+
+config LEDS_CLASS_FLASH
+ tristate "LED Flash Class Support"
+ depends on LEDS_CLASS
+ help
+ This option enables the flash led sysfs class in /sys/class/leds.
+ It wrapps LED Class and adds flash LEDs specific sysfs attributes
+ and kernel internal API to it. You'll need this to provide support
+ for the flash related features of a LED device. It can be built
+ as a module.
+
+comment "LED drivers"
+
+config LEDS_88PM860X
+ tristate "LED Support for Marvell 88PM860x PMIC"
+ depends on LEDS_CLASS
+ depends on MFD_88PM860X
+ help
+ This option enables support for on-chip LED drivers found on Marvell
+ Semiconductor 88PM8606 PMIC.
+
+config LEDS_LM3530
+ tristate "LCD Backlight driver for LM3530"
+ depends on LEDS_CLASS
+ depends on I2C
+ help
+ This option enables support for the LCD backlight using
+ LM3530 ambient light sensor chip. This ALS chip can be
+ controlled manually or using PWM input or using ambient
+ light automatically.
+
+config LEDS_LM3533
+ tristate "LED support for LM3533"
+ depends on LEDS_CLASS
+ depends on MFD_LM3533
+ help
+ This option enables support for the LEDs on National Semiconductor /
+ TI LM3533 Lighting Power chips.
+
+ The LEDs can be controlled directly, through PWM input, or by the
+ ambient-light-sensor interface. The chip supports
+ hardware-accelerated blinking with maximum on and off periods of 9.8
+ and 77 seconds respectively.
+
+config LEDS_LM3642
+ tristate "LED support for LM3642 Chip"
+ depends on LEDS_CLASS && I2C
+ select REGMAP_I2C
+ help
+ This option enables support for LEDs connected to LM3642.
+ The LM3642 is a 4MHz fixed-frequency synchronous boost
+ converter plus 1.5A constant current driver for a high-current
+ white LED.
+
+
+config LEDS_LOCOMO
+ tristate "LED Support for Locomo device"
+ depends on LEDS_CLASS
+ depends on SHARP_LOCOMO
+ help
+ This option enables support for the LEDs on Sharp Locomo.
+ Zaurus models SL-5500 and SL-5600.
+
+config LEDS_MIKROTIK_RB532
+ tristate "LED Support for Mikrotik Routerboard 532"
+ depends on LEDS_CLASS
+ depends on MIKROTIK_RB532
+ help
+ This option enables support for the so called "User LED" of
+ Mikrotik's Routerboard 532.
+
+config LEDS_S3C24XX
+ tristate "LED Support for Samsung S3C24XX GPIO LEDs"
+ depends on LEDS_CLASS
+ depends on ARCH_S3C24XX
+ help
+ This option enables support for LEDs connected to GPIO lines
+ on Samsung S3C24XX series CPUs, such as the S3C2410 and S3C2440.
+
+config LEDS_NET48XX
+ tristate "LED Support for Soekris net48xx series Error LED"
+ depends on LEDS_CLASS
+ depends on SCx200_GPIO
+ help
+ This option enables support for the Soekris net4801 and net4826 error
+ LED.
+
+config LEDS_FSG
+ tristate "LED Support for the Freecom FSG-3"
+ depends on LEDS_CLASS
+ depends on MACH_FSG
+ help
+ This option enables support for the LEDs on the Freecom FSG-3.
+
+config LEDS_WRAP
+ tristate "LED Support for the WRAP series LEDs"
+ depends on LEDS_CLASS
+ depends on SCx200_GPIO
+ help
+ This option enables support for the PCEngines WRAP programmable LEDs.
+
+config LEDS_COBALT_QUBE
+ tristate "LED Support for the Cobalt Qube series front LED"
+ depends on LEDS_CLASS
+ depends on MIPS_COBALT
+ help
+ This option enables support for the front LED on Cobalt Qube series
+
+config LEDS_COBALT_RAQ
+ bool "LED Support for the Cobalt Raq series"
+ depends on LEDS_CLASS=y && MIPS_COBALT
+ select LEDS_TRIGGERS
+ help
+ This option enables support for the Cobalt Raq series LEDs.
+
+config LEDS_SUNFIRE
+ tristate "LED support for SunFire servers."
+ depends on LEDS_CLASS
+ depends on SPARC64
+ select LEDS_TRIGGERS
+ help
+ This option enables support for the Left, Middle, and Right
+ LEDs on the I/O and CPU boards of SunFire UltraSPARC servers.
+
+config LEDS_IPAQ_MICRO
+ tristate "LED Support for the Compaq iPAQ h3xxx"
+ depends on MFD_IPAQ_MICRO
+ help
+ Choose this option if you want to use the notification LED on
+ Compaq/HP iPAQ h3100 and h3600.
+
+config LEDS_HP6XX
+ tristate "LED Support for the HP Jornada 6xx"
+ depends on LEDS_CLASS
+ depends on SH_HP6XX
+ help
+ This option enables LED support for the handheld
+ HP Jornada 620/660/680/690.
+
+config LEDS_PCA9532
+ tristate "LED driver for PCA9532 dimmer"
+ depends on LEDS_CLASS
+ depends on I2C && INPUT
+ help
+ This option enables support for NXP pca9532
+ LED controller. It is generally only useful
+ as a platform driver
+
+config LEDS_PCA9532_GPIO
+ bool "Enable GPIO support for PCA9532"
+ depends on LEDS_PCA9532
+ depends on GPIOLIB
+ help
+ Allow unused pins on PCA9532 to be used as gpio.
+
+ To use a pin as gpio pca9532_type in pca9532_platform data needs to
+ set to PCA9532_TYPE_GPIO.
+
+config LEDS_GPIO
+ tristate "LED Support for GPIO connected LEDs"
+ depends on LEDS_CLASS
+ depends on GPIOLIB
+ help
+ This option enables support for the LEDs connected to GPIO
+ outputs. To be useful the particular board must have LEDs
+ and they must be connected to the GPIO lines. The LEDs must be
+ defined as platform devices and/or OpenFirmware platform devices.
+ The code to use these bindings can be selected below.
+
+config LEDS_LP3944
+ tristate "LED Support for N.S. LP3944 (Fun Light) I2C chip"
+ depends on LEDS_CLASS
+ depends on I2C
+ help
+ This option enables support for LEDs connected to the National
+ Semiconductor LP3944 Lighting Management Unit (LMU) also known as
+ Fun Light Chip.
+
+ To compile this driver as a module, choose M here: the
+ module will be called leds-lp3944.
+
+config LEDS_LP55XX_COMMON
+ tristate "Common Driver for TI/National LP5521/5523/55231/5562/8501"
+ depends on LEDS_LP5521 || LEDS_LP5523 || LEDS_LP5562 || LEDS_LP8501
+ select FW_LOADER
+ help
+ This option supports common operations for LP5521/5523/55231/5562/8501
+ devices.
+
+config LEDS_LP5521
+ tristate "LED Support for N.S. LP5521 LED driver chip"
+ depends on LEDS_CLASS && I2C
+ select LEDS_LP55XX_COMMON
+ help
+ If you say yes here you get support for the National Semiconductor
+ LP5521 LED driver. It is 3 channel chip with programmable engines.
+ Driver provides direct control via LED class and interface for
+ programming the engines.
+
+config LEDS_LP5523
+ tristate "LED Support for TI/National LP5523/55231 LED driver chip"
+ depends on LEDS_CLASS && I2C
+ select LEDS_LP55XX_COMMON
+ help
+ If you say yes here you get support for TI/National Semiconductor
+ LP5523/55231 LED driver.
+ It is 9 channel chip with programmable engines.
+ Driver provides direct control via LED class and interface for
+ programming the engines.
+
+config LEDS_LP5562
+ tristate "LED Support for TI LP5562 LED driver chip"
+ depends on LEDS_CLASS && I2C
+ select LEDS_LP55XX_COMMON
+ help
+ If you say yes here you get support for TI LP5562 LED driver.
+ It is 4 channels chip with programmable engines.
+ Driver provides direct control via LED class and interface for
+ programming the engines.
+
+config LEDS_LP8501
+ tristate "LED Support for TI LP8501 LED driver chip"
+ depends on LEDS_CLASS && I2C
+ select LEDS_LP55XX_COMMON
+ help
+ If you say yes here you get support for TI LP8501 LED driver.
+ It is 9 channel chip with programmable engines.
+ Driver provides direct control via LED class and interface for
+ programming the engines.
+ It is similar as LP5523, but output power selection is available.
+ And register layout and engine program schemes are different.
+
+config LEDS_LP8788
+ tristate "LED support for the TI LP8788 PMIC"
+ depends on LEDS_CLASS
+ depends on MFD_LP8788
+ help
+ This option enables support for the Keyboard LEDs on the LP8788 PMIC.
+
+config LEDS_LP8860
+ tristate "LED support for the TI LP8860 4 channel LED driver"
+ depends on LEDS_CLASS && I2C
+ select REGMAP_I2C
+ help
+ If you say yes here you get support for the TI LP8860 4 channel
+ LED driver.
+ This option enables support for the display cluster LEDs
+ on the LP8860 4 channel LED driver using the I2C communication
+ bus.
+
+config LEDS_CLEVO_MAIL
+ tristate "Mail LED on Clevo notebook"
+ depends on LEDS_CLASS
+ depends on X86 && SERIO_I8042 && DMI
+ help
+ This driver makes the mail LED accessible from userspace
+ programs through the leds subsystem. This LED have three
+ known mode: off, blink at 0.5Hz and blink at 1Hz.
+
+ The driver supports two kinds of interface: using ledtrig-timer
+ or through /sys/class/leds/clevo::mail/brightness. As this LED
+ cannot change it's brightness it blinks instead. The brightness
+ value 0 means off, 1..127 means blink at 0.5Hz and 128..255 means
+ blink at 1Hz.
+
+ This module can drive the mail LED for the following notebooks:
+
+ Clevo D400P
+ Clevo D410J
+ Clevo D410V
+ Clevo D400V/D470V (not tested, but might work)
+ Clevo M540N
+ Clevo M5x0N (not tested, but might work)
+ Positivo Mobile (Clevo M5x0V)
+
+ If your model is not listed here you can try the "nodetect"
+ module parameter.
+
+ To compile this driver as a module, choose M here: the
+ module will be called leds-clevo-mail.
+
+config LEDS_PCA955X
+ tristate "LED Support for PCA955x I2C chips"
+ depends on LEDS_CLASS
+ depends on I2C
+ help
+ This option enables support for LEDs connected to PCA955x
+ LED driver chips accessed via the I2C bus. Supported
+ devices include PCA9550, PCA9551, PCA9552, and PCA9553.
+
+config LEDS_PCA963X
+ tristate "LED support for PCA963x I2C chip"
+ depends on LEDS_CLASS
+ depends on I2C
+ help
+ This option enables support for LEDs connected to the PCA963x
+ LED driver chip accessed via the I2C bus. Supported
+ devices include PCA9633 and PCA9634
+
+config LEDS_WM831X_STATUS
+ tristate "LED support for status LEDs on WM831x PMICs"
+ depends on LEDS_CLASS
+ depends on MFD_WM831X
+ help
+ This option enables support for the status LEDs of the WM831x
+ series of PMICs.
+
+config LEDS_WM8350
+ tristate "LED Support for WM8350 AudioPlus PMIC"
+ depends on LEDS_CLASS
+ depends on MFD_WM8350
+ help
+ This option enables support for LEDs driven by the Wolfson
+ Microelectronics WM8350 AudioPlus PMIC.
+
+config LEDS_DA903X
+ tristate "LED Support for DA9030/DA9034 PMIC"
+ depends on LEDS_CLASS
+ depends on PMIC_DA903X
+ help
+ This option enables support for on-chip LED drivers found
+ on Dialog Semiconductor DA9030/DA9034 PMICs.
+
+config LEDS_DA9052
+ tristate "Dialog DA9052/DA9053 LEDS"
+ depends on LEDS_CLASS
+ depends on PMIC_DA9052
+ help
+ This option enables support for on-chip LED drivers found
+ on Dialog Semiconductor DA9052-BC and DA9053-AA/Bx PMICs.
+
+config LEDS_DAC124S085
+ tristate "LED Support for DAC124S085 SPI DAC"
+ depends on LEDS_CLASS
+ depends on SPI
+ help
+ This option enables support for DAC124S085 SPI DAC from NatSemi,
+ which can be used to control up to four LEDs.
+
+config LEDS_PWM
+ tristate "PWM driven LED Support"
+ depends on LEDS_CLASS
+ depends on PWM
+ help
+ This option enables support for pwm driven LEDs
+
+config LEDS_REGULATOR
+ tristate "REGULATOR driven LED support"
+ depends on LEDS_CLASS
+ depends on REGULATOR
+ help
+ This option enables support for regulator driven LEDs.
+
+config LEDS_BD2802
+ tristate "LED driver for BD2802 RGB LED"
+ depends on LEDS_CLASS
+ depends on I2C
+ help
+ This option enables support for BD2802GU RGB LED driver chips
+ accessed via the I2C bus.
+
+config LEDS_INTEL_SS4200
+ tristate "LED driver for Intel NAS SS4200 series"
+ depends on LEDS_CLASS
+ depends on PCI && DMI
+ help
+ This option enables support for the Intel SS4200 series of
+ Network Attached Storage servers. You may control the hard
+ drive or power LEDs on the front panel. Using this driver
+ can stop the front LED from blinking after startup.
+
+config LEDS_LT3593
+ tristate "LED driver for LT3593 controllers"
+ depends on LEDS_CLASS
+ depends on GPIOLIB
+ help
+ This option enables support for LEDs driven by a Linear Technology
+ LT3593 controller. This controller uses a special one-wire pulse
+ coding protocol to set the brightness.
+
+config LEDS_ADP5520
+ tristate "LED Support for ADP5520/ADP5501 PMIC"
+ depends on LEDS_CLASS
+ depends on PMIC_ADP5520
+ help
+ This option enables support for on-chip LED drivers found
+ on Analog Devices ADP5520/ADP5501 PMICs.
+
+ To compile this driver as a module, choose M here: the module will
+ be called leds-adp5520.
+
+config LEDS_DELL_NETBOOKS
+ tristate "External LED on Dell Business Netbooks"
+ depends on LEDS_CLASS
+ depends on X86 && ACPI_WMI
+ help
+ This adds support for the Latitude 2100 and similar
+ notebooks that have an external LED.
+
+config LEDS_MC13783
+ tristate "LED Support for MC13XXX PMIC"
+ depends on LEDS_CLASS
+ depends on MFD_MC13XXX
+ help
+ This option enable support for on-chip LED drivers found
+ on Freescale Semiconductor MC13783/MC13892/MC34708 PMIC.
+
+config LEDS_NS2
+ tristate "LED support for Network Space v2 GPIO LEDs"
+ depends on LEDS_CLASS
+ depends on MACH_KIRKWOOD
+ default y
+ help
+ This option enable support for the dual-GPIO LED found on the
+ Network Space v2 board (and parents). This include Internet Space v2,
+ Network Space (Max) v2 and d2 Network v2 boards.
+
+config LEDS_NETXBIG
+ tristate "LED support for Big Network series LEDs"
+ depends on LEDS_CLASS
+ depends on MACH_KIRKWOOD
+ default y
+ help
+ This option enable support for LEDs found on the LaCie 2Big
+ and 5Big Network v2 boards. The LEDs are wired to a CPLD and are
+ controlled through a GPIO extension bus.
+
+config LEDS_ASIC3
+ bool "LED support for the HTC ASIC3"
+ depends on LEDS_CLASS=y
+ depends on MFD_ASIC3
+ default y
+ help
+ This option enables support for the LEDs on the HTC ASIC3. The HTC
+ ASIC3 LED GPIOs are inputs, not outputs, thus the leds-gpio driver
+ cannot be used. This driver supports hardware blinking with an on+off
+ period from 62ms to 125s. Say Y to enable LEDs on the HP iPAQ hx4700.
+
+config LEDS_TCA6507
+ tristate "LED Support for TCA6507 I2C chip"
+ depends on LEDS_CLASS && I2C
+ help
+ This option enables support for LEDs connected to TC6507
+ LED driver chips accessed via the I2C bus.
+ Driver support brightness control and hardware-assisted blinking.
+
+config LEDS_MAX8997
+ tristate "LED support for MAX8997 PMIC"
+ depends on LEDS_CLASS && MFD_MAX8997
+ help
+ This option enables support for on-chip LED drivers on
+ MAXIM MAX8997 PMIC.
+
+config LEDS_LM355x
+ tristate "LED support for LM355x Chips, LM3554 and LM3556"
+ depends on LEDS_CLASS && I2C
+ select REGMAP_I2C
+ help
+ This option enables support for LEDs connected to LM355x.
+ LM355x includes Torch, Flash and Indicator functions.
+
+config LEDS_OT200
+ tristate "LED support for the Bachmann OT200"
+ depends on LEDS_CLASS && HAS_IOMEM && (X86_32 || COMPILE_TEST)
+ help
+ This option enables support for the LEDs on the Bachmann OT200.
+ Say Y to enable LEDs on the Bachmann OT200.
+
+config LEDS_MENF21BMC
+ tristate "LED support for the MEN 14F021P00 BMC"
+ depends on LEDS_CLASS && MFD_MENF21BMC
+ help
+ Say Y here to include support for the MEN 14F021P00 BMC LEDs.
+
+ This driver can also be built as a module. If so the module
+ will be called leds-menf21bmc.
+
+comment "LED driver for blink(1) USB RGB LED is under Special HID drivers (HID_THINGM)"
+
+config LEDS_BLINKM
+ tristate "LED support for the BlinkM I2C RGB LED"
+ depends on LEDS_CLASS
+ depends on I2C
+ help
+ This option enables support for the BlinkM RGB LED connected
+ through I2C. Say Y to enable support for the BlinkM LED.
+
+config LEDS_SYSCON
+ bool "LED support for LEDs on system controllers"
+ depends on LEDS_CLASS=y
+ depends on MFD_SYSCON
+ depends on OF
+ help
+ This option enabled support for the LEDs on syscon type
+ devices. This will only work with device tree enabled
+ devices.
+
+config LEDS_VERSATILE
+ tristate "LED support for the ARM Versatile and RealView"
+ depends on ARCH_REALVIEW || ARCH_VERSATILE
+ depends on LEDS_CLASS
+ help
+ This option enabled support for the LEDs on the ARM Versatile
+ and RealView boards. Say Y to enabled these.
+
+config LEDS_PM8941_WLED
+ tristate "LED support for the Qualcomm PM8941 WLED block"
+ depends on LEDS_CLASS
+ select REGMAP
+ help
+ This option enables support for the 'White' LED block
+ on Qualcomm PM8941 PMICs.
+
+comment "LED Triggers"
+source "drivers/leds/trigger/Kconfig"
+
+endif # NEW_LEDS
diff --git a/kernel/drivers/leds/Makefile b/kernel/drivers/leds/Makefile
new file mode 100644
index 000000000..bf4609338
--- /dev/null
+++ b/kernel/drivers/leds/Makefile
@@ -0,0 +1,67 @@
+
+# LED Core
+obj-$(CONFIG_NEW_LEDS) += led-core.o
+obj-$(CONFIG_LEDS_CLASS) += led-class.o
+obj-$(CONFIG_LEDS_CLASS_FLASH) += led-class-flash.o
+obj-$(CONFIG_LEDS_TRIGGERS) += led-triggers.o
+
+# LED Platform Drivers
+obj-$(CONFIG_LEDS_88PM860X) += leds-88pm860x.o
+obj-$(CONFIG_LEDS_BD2802) += leds-bd2802.o
+obj-$(CONFIG_LEDS_LOCOMO) += leds-locomo.o
+obj-$(CONFIG_LEDS_LM3530) += leds-lm3530.o
+obj-$(CONFIG_LEDS_LM3533) += leds-lm3533.o
+obj-$(CONFIG_LEDS_LM3642) += leds-lm3642.o
+obj-$(CONFIG_LEDS_MIKROTIK_RB532) += leds-rb532.o
+obj-$(CONFIG_LEDS_S3C24XX) += leds-s3c24xx.o
+obj-$(CONFIG_LEDS_NET48XX) += leds-net48xx.o
+obj-$(CONFIG_LEDS_WRAP) += leds-wrap.o
+obj-$(CONFIG_LEDS_COBALT_QUBE) += leds-cobalt-qube.o
+obj-$(CONFIG_LEDS_COBALT_RAQ) += leds-cobalt-raq.o
+obj-$(CONFIG_LEDS_SUNFIRE) += leds-sunfire.o
+obj-$(CONFIG_LEDS_PCA9532) += leds-pca9532.o
+obj-$(CONFIG_LEDS_GPIO_REGISTER) += leds-gpio-register.o
+obj-$(CONFIG_LEDS_GPIO) += leds-gpio.o
+obj-$(CONFIG_LEDS_LP3944) += leds-lp3944.o
+obj-$(CONFIG_LEDS_LP55XX_COMMON) += leds-lp55xx-common.o
+obj-$(CONFIG_LEDS_LP5521) += leds-lp5521.o
+obj-$(CONFIG_LEDS_LP5523) += leds-lp5523.o
+obj-$(CONFIG_LEDS_LP5562) += leds-lp5562.o
+obj-$(CONFIG_LEDS_LP8501) += leds-lp8501.o
+obj-$(CONFIG_LEDS_LP8788) += leds-lp8788.o
+obj-$(CONFIG_LEDS_LP8860) += leds-lp8860.o
+obj-$(CONFIG_LEDS_TCA6507) += leds-tca6507.o
+obj-$(CONFIG_LEDS_CLEVO_MAIL) += leds-clevo-mail.o
+obj-$(CONFIG_LEDS_IPAQ_MICRO) += leds-ipaq-micro.o
+obj-$(CONFIG_LEDS_HP6XX) += leds-hp6xx.o
+obj-$(CONFIG_LEDS_OT200) += leds-ot200.o
+obj-$(CONFIG_LEDS_FSG) += leds-fsg.o
+obj-$(CONFIG_LEDS_PCA955X) += leds-pca955x.o
+obj-$(CONFIG_LEDS_PCA963X) += leds-pca963x.o
+obj-$(CONFIG_LEDS_DA903X) += leds-da903x.o
+obj-$(CONFIG_LEDS_DA9052) += leds-da9052.o
+obj-$(CONFIG_LEDS_WM831X_STATUS) += leds-wm831x-status.o
+obj-$(CONFIG_LEDS_WM8350) += leds-wm8350.o
+obj-$(CONFIG_LEDS_PWM) += leds-pwm.o
+obj-$(CONFIG_LEDS_REGULATOR) += leds-regulator.o
+obj-$(CONFIG_LEDS_INTEL_SS4200) += leds-ss4200.o
+obj-$(CONFIG_LEDS_LT3593) += leds-lt3593.o
+obj-$(CONFIG_LEDS_ADP5520) += leds-adp5520.o
+obj-$(CONFIG_LEDS_DELL_NETBOOKS) += dell-led.o
+obj-$(CONFIG_LEDS_MC13783) += leds-mc13783.o
+obj-$(CONFIG_LEDS_NS2) += leds-ns2.o
+obj-$(CONFIG_LEDS_NETXBIG) += leds-netxbig.o
+obj-$(CONFIG_LEDS_ASIC3) += leds-asic3.o
+obj-$(CONFIG_LEDS_MAX8997) += leds-max8997.o
+obj-$(CONFIG_LEDS_LM355x) += leds-lm355x.o
+obj-$(CONFIG_LEDS_BLINKM) += leds-blinkm.o
+obj-$(CONFIG_LEDS_SYSCON) += leds-syscon.o
+obj-$(CONFIG_LEDS_VERSATILE) += leds-versatile.o
+obj-$(CONFIG_LEDS_MENF21BMC) += leds-menf21bmc.o
+obj-$(CONFIG_LEDS_PM8941_WLED) += leds-pm8941-wled.o
+
+# LED SPI Drivers
+obj-$(CONFIG_LEDS_DAC124S085) += leds-dac124s085.o
+
+# LED Triggers
+obj-$(CONFIG_LEDS_TRIGGERS) += trigger/
diff --git a/kernel/drivers/leds/dell-led.c b/kernel/drivers/leds/dell-led.c
new file mode 100644
index 000000000..c36acaf56
--- /dev/null
+++ b/kernel/drivers/leds/dell-led.c
@@ -0,0 +1,359 @@
+/*
+ * dell_led.c - Dell LED Driver
+ *
+ * Copyright (C) 2010 Dell Inc.
+ * Louis Davis <louis_davis@dell.com>
+ * Jim Dailey <jim_dailey@dell.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/acpi.h>
+#include <linux/leds.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/dmi.h>
+#include <linux/dell-led.h>
+
+MODULE_AUTHOR("Louis Davis/Jim Dailey");
+MODULE_DESCRIPTION("Dell LED Control Driver");
+MODULE_LICENSE("GPL");
+
+#define DELL_LED_BIOS_GUID "F6E4FE6E-909D-47cb-8BAB-C9F6F2F8D396"
+#define DELL_APP_GUID "A80593CE-A997-11DA-B012-B622A1EF5492"
+MODULE_ALIAS("wmi:" DELL_LED_BIOS_GUID);
+
+/* Error Result Codes: */
+#define INVALID_DEVICE_ID 250
+#define INVALID_PARAMETER 251
+#define INVALID_BUFFER 252
+#define INTERFACE_ERROR 253
+#define UNSUPPORTED_COMMAND 254
+#define UNSPECIFIED_ERROR 255
+
+/* Device ID */
+#define DEVICE_ID_PANEL_BACK 1
+
+/* LED Commands */
+#define CMD_LED_ON 16
+#define CMD_LED_OFF 17
+#define CMD_LED_BLINK 18
+
+struct app_wmi_args {
+ u16 class;
+ u16 selector;
+ u32 arg1;
+ u32 arg2;
+ u32 arg3;
+ u32 arg4;
+ u32 res1;
+ u32 res2;
+ u32 res3;
+ u32 res4;
+ char dummy[92];
+};
+
+#define GLOBAL_MIC_MUTE_ENABLE 0x364
+#define GLOBAL_MIC_MUTE_DISABLE 0x365
+
+struct dell_bios_data_token {
+ u16 tokenid;
+ u16 location;
+ u16 value;
+};
+
+struct __attribute__ ((__packed__)) dell_bios_calling_interface {
+ struct dmi_header header;
+ u16 cmd_io_addr;
+ u8 cmd_io_code;
+ u32 supported_cmds;
+ struct dell_bios_data_token damap[];
+};
+
+static struct dell_bios_data_token dell_mic_tokens[2];
+
+static int dell_wmi_perform_query(struct app_wmi_args *args)
+{
+ struct app_wmi_args *bios_return;
+ union acpi_object *obj;
+ struct acpi_buffer input;
+ struct acpi_buffer output = { ACPI_ALLOCATE_BUFFER, NULL };
+ acpi_status status;
+ u32 rc = -EINVAL;
+
+ input.length = 128;
+ input.pointer = args;
+
+ status = wmi_evaluate_method(DELL_APP_GUID, 0, 1, &input, &output);
+ if (!ACPI_SUCCESS(status))
+ goto err_out0;
+
+ obj = output.pointer;
+ if (!obj)
+ goto err_out0;
+
+ if (obj->type != ACPI_TYPE_BUFFER)
+ goto err_out1;
+
+ bios_return = (struct app_wmi_args *)obj->buffer.pointer;
+ rc = bios_return->res1;
+ if (rc)
+ goto err_out1;
+
+ memcpy(args, bios_return, sizeof(struct app_wmi_args));
+ rc = 0;
+
+ err_out1:
+ kfree(obj);
+ err_out0:
+ return rc;
+}
+
+static void __init find_micmute_tokens(const struct dmi_header *dm, void *dummy)
+{
+ struct dell_bios_calling_interface *calling_interface;
+ struct dell_bios_data_token *token;
+ int token_size = sizeof(struct dell_bios_data_token);
+ int i = 0;
+
+ if (dm->type == 0xda && dm->length > 17) {
+ calling_interface = container_of(dm,
+ struct dell_bios_calling_interface, header);
+
+ token = &calling_interface->damap[i];
+ while (token->tokenid != 0xffff) {
+ if (token->tokenid == GLOBAL_MIC_MUTE_DISABLE)
+ memcpy(&dell_mic_tokens[0], token, token_size);
+ else if (token->tokenid == GLOBAL_MIC_MUTE_ENABLE)
+ memcpy(&dell_mic_tokens[1], token, token_size);
+
+ i++;
+ token = &calling_interface->damap[i];
+ }
+ }
+}
+
+static int dell_micmute_led_set(int state)
+{
+ struct app_wmi_args args;
+ struct dell_bios_data_token *token;
+
+ if (!wmi_has_guid(DELL_APP_GUID))
+ return -ENODEV;
+
+ if (state == 0 || state == 1)
+ token = &dell_mic_tokens[state];
+ else
+ return -EINVAL;
+
+ memset(&args, 0, sizeof(struct app_wmi_args));
+
+ args.class = 1;
+ args.arg1 = token->location;
+ args.arg2 = token->value;
+
+ dell_wmi_perform_query(&args);
+
+ return state;
+}
+
+int dell_app_wmi_led_set(int whichled, int on)
+{
+ int state = 0;
+
+ switch (whichled) {
+ case DELL_LED_MICMUTE:
+ state = dell_micmute_led_set(on);
+ break;
+ default:
+ pr_warn("led type %x is not supported\n", whichled);
+ break;
+ }
+
+ return state;
+}
+EXPORT_SYMBOL_GPL(dell_app_wmi_led_set);
+
+static int __init dell_micmute_led_init(void)
+{
+ memset(dell_mic_tokens, 0, sizeof(struct dell_bios_data_token) * 2);
+ dmi_walk(find_micmute_tokens, NULL);
+
+ return 0;
+}
+
+struct bios_args {
+ unsigned char length;
+ unsigned char result_code;
+ unsigned char device_id;
+ unsigned char command;
+ unsigned char on_time;
+ unsigned char off_time;
+};
+
+static int dell_led_perform_fn(u8 length,
+ u8 result_code,
+ u8 device_id,
+ u8 command,
+ u8 on_time,
+ u8 off_time)
+{
+ struct bios_args *bios_return;
+ u8 return_code;
+ union acpi_object *obj;
+ struct acpi_buffer output = { ACPI_ALLOCATE_BUFFER, NULL };
+ struct acpi_buffer input;
+ acpi_status status;
+
+ struct bios_args args;
+ args.length = length;
+ args.result_code = result_code;
+ args.device_id = device_id;
+ args.command = command;
+ args.on_time = on_time;
+ args.off_time = off_time;
+
+ input.length = sizeof(struct bios_args);
+ input.pointer = &args;
+
+ status = wmi_evaluate_method(DELL_LED_BIOS_GUID,
+ 1,
+ 1,
+ &input,
+ &output);
+
+ if (ACPI_FAILURE(status))
+ return status;
+
+ obj = output.pointer;
+
+ if (!obj)
+ return -EINVAL;
+ else if (obj->type != ACPI_TYPE_BUFFER) {
+ kfree(obj);
+ return -EINVAL;
+ }
+
+ bios_return = ((struct bios_args *)obj->buffer.pointer);
+ return_code = bios_return->result_code;
+
+ kfree(obj);
+
+ return return_code;
+}
+
+static int led_on(void)
+{
+ return dell_led_perform_fn(3, /* Length of command */
+ INTERFACE_ERROR, /* Init to INTERFACE_ERROR */
+ DEVICE_ID_PANEL_BACK, /* Device ID */
+ CMD_LED_ON, /* Command */
+ 0, /* not used */
+ 0); /* not used */
+}
+
+static int led_off(void)
+{
+ return dell_led_perform_fn(3, /* Length of command */
+ INTERFACE_ERROR, /* Init to INTERFACE_ERROR */
+ DEVICE_ID_PANEL_BACK, /* Device ID */
+ CMD_LED_OFF, /* Command */
+ 0, /* not used */
+ 0); /* not used */
+}
+
+static int led_blink(unsigned char on_eighths,
+ unsigned char off_eighths)
+{
+ return dell_led_perform_fn(5, /* Length of command */
+ INTERFACE_ERROR, /* Init to INTERFACE_ERROR */
+ DEVICE_ID_PANEL_BACK, /* Device ID */
+ CMD_LED_BLINK, /* Command */
+ on_eighths, /* blink on in eigths of a second */
+ off_eighths); /* blink off in eights of a second */
+}
+
+static void dell_led_set(struct led_classdev *led_cdev,
+ enum led_brightness value)
+{
+ if (value == LED_OFF)
+ led_off();
+ else
+ led_on();
+}
+
+static int dell_led_blink(struct led_classdev *led_cdev,
+ unsigned long *delay_on,
+ unsigned long *delay_off)
+{
+ unsigned long on_eighths;
+ unsigned long off_eighths;
+
+ /* The Dell LED delay is based on 125ms intervals.
+ Need to round up to next interval. */
+
+ on_eighths = (*delay_on + 124) / 125;
+ if (0 == on_eighths)
+ on_eighths = 1;
+ if (on_eighths > 255)
+ on_eighths = 255;
+ *delay_on = on_eighths * 125;
+
+ off_eighths = (*delay_off + 124) / 125;
+ if (0 == off_eighths)
+ off_eighths = 1;
+ if (off_eighths > 255)
+ off_eighths = 255;
+ *delay_off = off_eighths * 125;
+
+ led_blink(on_eighths, off_eighths);
+
+ return 0;
+}
+
+static struct led_classdev dell_led = {
+ .name = "dell::lid",
+ .brightness = LED_OFF,
+ .max_brightness = 1,
+ .brightness_set = dell_led_set,
+ .blink_set = dell_led_blink,
+ .flags = LED_CORE_SUSPENDRESUME,
+};
+
+static int __init dell_led_init(void)
+{
+ int error = 0;
+
+ if (!wmi_has_guid(DELL_LED_BIOS_GUID) && !wmi_has_guid(DELL_APP_GUID))
+ return -ENODEV;
+
+ if (wmi_has_guid(DELL_APP_GUID))
+ error = dell_micmute_led_init();
+
+ if (wmi_has_guid(DELL_LED_BIOS_GUID)) {
+ error = led_off();
+ if (error != 0)
+ return -ENODEV;
+
+ error = led_classdev_register(NULL, &dell_led);
+ }
+
+ return error;
+}
+
+static void __exit dell_led_exit(void)
+{
+ int error = 0;
+
+ if (wmi_has_guid(DELL_LED_BIOS_GUID)) {
+ error = led_off();
+ if (error == 0)
+ led_classdev_unregister(&dell_led);
+ }
+}
+
+module_init(dell_led_init);
+module_exit(dell_led_exit);
diff --git a/kernel/drivers/leds/led-class-flash.c b/kernel/drivers/leds/led-class-flash.c
new file mode 100644
index 000000000..3b2573411
--- /dev/null
+++ b/kernel/drivers/leds/led-class-flash.c
@@ -0,0 +1,404 @@
+/*
+ * LED Flash class interface
+ *
+ * Copyright (C) 2015 Samsung Electronics Co., Ltd.
+ * Author: Jacek Anaszewski <j.anaszewski@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/device.h>
+#include <linux/init.h>
+#include <linux/led-class-flash.h>
+#include <linux/leds.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include "leds.h"
+
+#define has_flash_op(fled_cdev, op) \
+ (fled_cdev && fled_cdev->ops->op)
+
+#define call_flash_op(fled_cdev, op, args...) \
+ ((has_flash_op(fled_cdev, op)) ? \
+ (fled_cdev->ops->op(fled_cdev, args)) : \
+ -EINVAL)
+
+static const char * const led_flash_fault_names[] = {
+ "led-over-voltage",
+ "flash-timeout-exceeded",
+ "controller-over-temperature",
+ "controller-short-circuit",
+ "led-power-supply-over-current",
+ "indicator-led-fault",
+ "led-under-voltage",
+ "controller-under-voltage",
+ "led-over-temperature",
+};
+
+static ssize_t flash_brightness_store(struct device *dev,
+ struct device_attribute *attr, const char *buf, size_t size)
+{
+ struct led_classdev *led_cdev = dev_get_drvdata(dev);
+ struct led_classdev_flash *fled_cdev = lcdev_to_flcdev(led_cdev);
+ unsigned long state;
+ ssize_t ret;
+
+ mutex_lock(&led_cdev->led_access);
+
+ if (led_sysfs_is_disabled(led_cdev)) {
+ ret = -EBUSY;
+ goto unlock;
+ }
+
+ ret = kstrtoul(buf, 10, &state);
+ if (ret)
+ goto unlock;
+
+ ret = led_set_flash_brightness(fled_cdev, state);
+ if (ret < 0)
+ goto unlock;
+
+ ret = size;
+unlock:
+ mutex_unlock(&led_cdev->led_access);
+ return ret;
+}
+
+static ssize_t flash_brightness_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct led_classdev *led_cdev = dev_get_drvdata(dev);
+ struct led_classdev_flash *fled_cdev = lcdev_to_flcdev(led_cdev);
+
+ /* no lock needed for this */
+ led_update_flash_brightness(fled_cdev);
+
+ return sprintf(buf, "%u\n", fled_cdev->brightness.val);
+}
+static DEVICE_ATTR_RW(flash_brightness);
+
+static ssize_t max_flash_brightness_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct led_classdev *led_cdev = dev_get_drvdata(dev);
+ struct led_classdev_flash *fled_cdev = lcdev_to_flcdev(led_cdev);
+
+ return sprintf(buf, "%u\n", fled_cdev->brightness.max);
+}
+static DEVICE_ATTR_RO(max_flash_brightness);
+
+static ssize_t flash_strobe_store(struct device *dev,
+ struct device_attribute *attr, const char *buf, size_t size)
+{
+ struct led_classdev *led_cdev = dev_get_drvdata(dev);
+ struct led_classdev_flash *fled_cdev = lcdev_to_flcdev(led_cdev);
+ unsigned long state;
+ ssize_t ret = -EINVAL;
+
+ mutex_lock(&led_cdev->led_access);
+
+ if (led_sysfs_is_disabled(led_cdev)) {
+ ret = -EBUSY;
+ goto unlock;
+ }
+
+ ret = kstrtoul(buf, 10, &state);
+ if (ret)
+ goto unlock;
+
+ if (state < 0 || state > 1) {
+ ret = -EINVAL;
+ goto unlock;
+ }
+
+ ret = led_set_flash_strobe(fled_cdev, state);
+ if (ret < 0)
+ goto unlock;
+ ret = size;
+unlock:
+ mutex_unlock(&led_cdev->led_access);
+ return ret;
+}
+
+static ssize_t flash_strobe_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct led_classdev *led_cdev = dev_get_drvdata(dev);
+ struct led_classdev_flash *fled_cdev = lcdev_to_flcdev(led_cdev);
+ bool state;
+ int ret;
+
+ /* no lock needed for this */
+ ret = led_get_flash_strobe(fled_cdev, &state);
+ if (ret < 0)
+ return ret;
+
+ return sprintf(buf, "%u\n", state);
+}
+static DEVICE_ATTR_RW(flash_strobe);
+
+static ssize_t flash_timeout_store(struct device *dev,
+ struct device_attribute *attr, const char *buf, size_t size)
+{
+ struct led_classdev *led_cdev = dev_get_drvdata(dev);
+ struct led_classdev_flash *fled_cdev = lcdev_to_flcdev(led_cdev);
+ unsigned long flash_timeout;
+ ssize_t ret;
+
+ mutex_lock(&led_cdev->led_access);
+
+ if (led_sysfs_is_disabled(led_cdev)) {
+ ret = -EBUSY;
+ goto unlock;
+ }
+
+ ret = kstrtoul(buf, 10, &flash_timeout);
+ if (ret)
+ goto unlock;
+
+ ret = led_set_flash_timeout(fled_cdev, flash_timeout);
+ if (ret < 0)
+ goto unlock;
+
+ ret = size;
+unlock:
+ mutex_unlock(&led_cdev->led_access);
+ return ret;
+}
+
+static ssize_t flash_timeout_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct led_classdev *led_cdev = dev_get_drvdata(dev);
+ struct led_classdev_flash *fled_cdev = lcdev_to_flcdev(led_cdev);
+
+ return sprintf(buf, "%u\n", fled_cdev->timeout.val);
+}
+static DEVICE_ATTR_RW(flash_timeout);
+
+static ssize_t max_flash_timeout_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct led_classdev *led_cdev = dev_get_drvdata(dev);
+ struct led_classdev_flash *fled_cdev = lcdev_to_flcdev(led_cdev);
+
+ return sprintf(buf, "%u\n", fled_cdev->timeout.max);
+}
+static DEVICE_ATTR_RO(max_flash_timeout);
+
+static ssize_t flash_fault_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct led_classdev *led_cdev = dev_get_drvdata(dev);
+ struct led_classdev_flash *fled_cdev = lcdev_to_flcdev(led_cdev);
+ u32 fault, mask = 0x1;
+ char *pbuf = buf;
+ int i, ret, buf_len;
+
+ ret = led_get_flash_fault(fled_cdev, &fault);
+ if (ret < 0)
+ return -EINVAL;
+
+ *buf = '\0';
+
+ for (i = 0; i < LED_NUM_FLASH_FAULTS; ++i) {
+ if (fault & mask) {
+ buf_len = sprintf(pbuf, "%s ",
+ led_flash_fault_names[i]);
+ pbuf += buf_len;
+ }
+ mask <<= 1;
+ }
+
+ return sprintf(buf, "%s\n", buf);
+}
+static DEVICE_ATTR_RO(flash_fault);
+
+static struct attribute *led_flash_strobe_attrs[] = {
+ &dev_attr_flash_strobe.attr,
+ NULL,
+};
+
+static struct attribute *led_flash_timeout_attrs[] = {
+ &dev_attr_flash_timeout.attr,
+ &dev_attr_max_flash_timeout.attr,
+ NULL,
+};
+
+static struct attribute *led_flash_brightness_attrs[] = {
+ &dev_attr_flash_brightness.attr,
+ &dev_attr_max_flash_brightness.attr,
+ NULL,
+};
+
+static struct attribute *led_flash_fault_attrs[] = {
+ &dev_attr_flash_fault.attr,
+ NULL,
+};
+
+static const struct attribute_group led_flash_strobe_group = {
+ .attrs = led_flash_strobe_attrs,
+};
+
+static const struct attribute_group led_flash_timeout_group = {
+ .attrs = led_flash_timeout_attrs,
+};
+
+static const struct attribute_group led_flash_brightness_group = {
+ .attrs = led_flash_brightness_attrs,
+};
+
+static const struct attribute_group led_flash_fault_group = {
+ .attrs = led_flash_fault_attrs,
+};
+
+static void led_flash_resume(struct led_classdev *led_cdev)
+{
+ struct led_classdev_flash *fled_cdev = lcdev_to_flcdev(led_cdev);
+
+ call_flash_op(fled_cdev, flash_brightness_set,
+ fled_cdev->brightness.val);
+ call_flash_op(fled_cdev, timeout_set, fled_cdev->timeout.val);
+}
+
+static void led_flash_init_sysfs_groups(struct led_classdev_flash *fled_cdev)
+{
+ struct led_classdev *led_cdev = &fled_cdev->led_cdev;
+ const struct led_flash_ops *ops = fled_cdev->ops;
+ const struct attribute_group **flash_groups = fled_cdev->sysfs_groups;
+
+ int num_sysfs_groups = 0;
+
+ flash_groups[num_sysfs_groups++] = &led_flash_strobe_group;
+
+ if (ops->flash_brightness_set)
+ flash_groups[num_sysfs_groups++] = &led_flash_brightness_group;
+
+ if (ops->timeout_set)
+ flash_groups[num_sysfs_groups++] = &led_flash_timeout_group;
+
+ if (ops->fault_get)
+ flash_groups[num_sysfs_groups++] = &led_flash_fault_group;
+
+ led_cdev->groups = flash_groups;
+}
+
+int led_classdev_flash_register(struct device *parent,
+ struct led_classdev_flash *fled_cdev)
+{
+ struct led_classdev *led_cdev;
+ const struct led_flash_ops *ops;
+ int ret;
+
+ if (!fled_cdev)
+ return -EINVAL;
+
+ led_cdev = &fled_cdev->led_cdev;
+
+ if (led_cdev->flags & LED_DEV_CAP_FLASH) {
+ if (!led_cdev->brightness_set_sync)
+ return -EINVAL;
+
+ ops = fled_cdev->ops;
+ if (!ops || !ops->strobe_set)
+ return -EINVAL;
+
+ led_cdev->flash_resume = led_flash_resume;
+
+ /* Select the sysfs attributes to be created for the device */
+ led_flash_init_sysfs_groups(fled_cdev);
+ }
+
+ /* Register led class device */
+ ret = led_classdev_register(parent, led_cdev);
+ if (ret < 0)
+ return ret;
+
+ /* Setting a torch brightness needs to have immediate effect */
+ led_cdev->flags &= ~SET_BRIGHTNESS_ASYNC;
+ led_cdev->flags |= SET_BRIGHTNESS_SYNC;
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(led_classdev_flash_register);
+
+void led_classdev_flash_unregister(struct led_classdev_flash *fled_cdev)
+{
+ if (!fled_cdev)
+ return;
+
+ led_classdev_unregister(&fled_cdev->led_cdev);
+}
+EXPORT_SYMBOL_GPL(led_classdev_flash_unregister);
+
+static void led_clamp_align(struct led_flash_setting *s)
+{
+ u32 v, offset;
+
+ v = s->val + s->step / 2;
+ v = clamp(v, s->min, s->max);
+ offset = v - s->min;
+ offset = s->step * (offset / s->step);
+ s->val = s->min + offset;
+}
+
+int led_set_flash_timeout(struct led_classdev_flash *fled_cdev, u32 timeout)
+{
+ struct led_classdev *led_cdev = &fled_cdev->led_cdev;
+ struct led_flash_setting *s = &fled_cdev->timeout;
+
+ s->val = timeout;
+ led_clamp_align(s);
+
+ if (!(led_cdev->flags & LED_SUSPENDED))
+ return call_flash_op(fled_cdev, timeout_set, s->val);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(led_set_flash_timeout);
+
+int led_get_flash_fault(struct led_classdev_flash *fled_cdev, u32 *fault)
+{
+ return call_flash_op(fled_cdev, fault_get, fault);
+}
+EXPORT_SYMBOL_GPL(led_get_flash_fault);
+
+int led_set_flash_brightness(struct led_classdev_flash *fled_cdev,
+ u32 brightness)
+{
+ struct led_classdev *led_cdev = &fled_cdev->led_cdev;
+ struct led_flash_setting *s = &fled_cdev->brightness;
+
+ s->val = brightness;
+ led_clamp_align(s);
+
+ if (!(led_cdev->flags & LED_SUSPENDED))
+ return call_flash_op(fled_cdev, flash_brightness_set, s->val);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(led_set_flash_brightness);
+
+int led_update_flash_brightness(struct led_classdev_flash *fled_cdev)
+{
+ struct led_flash_setting *s = &fled_cdev->brightness;
+ u32 brightness;
+
+ if (has_flash_op(fled_cdev, flash_brightness_get)) {
+ int ret = call_flash_op(fled_cdev, flash_brightness_get,
+ &brightness);
+ if (ret < 0)
+ return ret;
+
+ s->val = brightness;
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(led_update_flash_brightness);
+
+MODULE_AUTHOR("Jacek Anaszewski <j.anaszewski@samsung.com>");
+MODULE_DESCRIPTION("LED Flash class interface");
+MODULE_LICENSE("GPL v2");
diff --git a/kernel/drivers/leds/led-class.c b/kernel/drivers/leds/led-class.c
new file mode 100644
index 000000000..7fb2a19ac
--- /dev/null
+++ b/kernel/drivers/leds/led-class.c
@@ -0,0 +1,402 @@
+/*
+ * LED Class Core
+ *
+ * Copyright (C) 2005 John Lenz <lenz@cs.wisc.edu>
+ * Copyright (C) 2005-2007 Richard Purdie <rpurdie@openedhand.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/ctype.h>
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/leds.h>
+#include <linux/list.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+#include <linux/timer.h>
+#include "leds.h"
+
+static struct class *leds_class;
+
+static ssize_t brightness_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct led_classdev *led_cdev = dev_get_drvdata(dev);
+
+ /* no lock needed for this */
+ led_update_brightness(led_cdev);
+
+ return sprintf(buf, "%u\n", led_cdev->brightness);
+}
+
+static ssize_t brightness_store(struct device *dev,
+ struct device_attribute *attr, const char *buf, size_t size)
+{
+ struct led_classdev *led_cdev = dev_get_drvdata(dev);
+ unsigned long state;
+ ssize_t ret;
+
+ mutex_lock(&led_cdev->led_access);
+
+ if (led_sysfs_is_disabled(led_cdev)) {
+ ret = -EBUSY;
+ goto unlock;
+ }
+
+ ret = kstrtoul(buf, 10, &state);
+ if (ret)
+ goto unlock;
+
+ if (state == LED_OFF)
+ led_trigger_remove(led_cdev);
+ led_set_brightness(led_cdev, state);
+
+ ret = size;
+unlock:
+ mutex_unlock(&led_cdev->led_access);
+ return ret;
+}
+static DEVICE_ATTR_RW(brightness);
+
+static ssize_t max_brightness_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct led_classdev *led_cdev = dev_get_drvdata(dev);
+
+ return sprintf(buf, "%u\n", led_cdev->max_brightness);
+}
+static DEVICE_ATTR_RO(max_brightness);
+
+#ifdef CONFIG_LEDS_TRIGGERS
+static DEVICE_ATTR(trigger, 0644, led_trigger_show, led_trigger_store);
+static struct attribute *led_trigger_attrs[] = {
+ &dev_attr_trigger.attr,
+ NULL,
+};
+static const struct attribute_group led_trigger_group = {
+ .attrs = led_trigger_attrs,
+};
+#endif
+
+static struct attribute *led_class_attrs[] = {
+ &dev_attr_brightness.attr,
+ &dev_attr_max_brightness.attr,
+ NULL,
+};
+
+static const struct attribute_group led_group = {
+ .attrs = led_class_attrs,
+};
+
+static const struct attribute_group *led_groups[] = {
+ &led_group,
+#ifdef CONFIG_LEDS_TRIGGERS
+ &led_trigger_group,
+#endif
+ NULL,
+};
+
+static void led_timer_function(unsigned long data)
+{
+ struct led_classdev *led_cdev = (void *)data;
+ unsigned long brightness;
+ unsigned long delay;
+
+ if (!led_cdev->blink_delay_on || !led_cdev->blink_delay_off) {
+ led_set_brightness_async(led_cdev, LED_OFF);
+ return;
+ }
+
+ if (led_cdev->flags & LED_BLINK_ONESHOT_STOP) {
+ led_cdev->flags &= ~LED_BLINK_ONESHOT_STOP;
+ return;
+ }
+
+ brightness = led_get_brightness(led_cdev);
+ if (!brightness) {
+ /* Time to switch the LED on. */
+ brightness = led_cdev->blink_brightness;
+ delay = led_cdev->blink_delay_on;
+ } else {
+ /* Store the current brightness value to be able
+ * to restore it when the delay_off period is over.
+ */
+ led_cdev->blink_brightness = brightness;
+ brightness = LED_OFF;
+ delay = led_cdev->blink_delay_off;
+ }
+
+ led_set_brightness_async(led_cdev, brightness);
+
+ /* Return in next iteration if led is in one-shot mode and we are in
+ * the final blink state so that the led is toggled each delay_on +
+ * delay_off milliseconds in worst case.
+ */
+ if (led_cdev->flags & LED_BLINK_ONESHOT) {
+ if (led_cdev->flags & LED_BLINK_INVERT) {
+ if (brightness)
+ led_cdev->flags |= LED_BLINK_ONESHOT_STOP;
+ } else {
+ if (!brightness)
+ led_cdev->flags |= LED_BLINK_ONESHOT_STOP;
+ }
+ }
+
+ mod_timer(&led_cdev->blink_timer, jiffies + msecs_to_jiffies(delay));
+}
+
+static void set_brightness_delayed(struct work_struct *ws)
+{
+ struct led_classdev *led_cdev =
+ container_of(ws, struct led_classdev, set_brightness_work);
+
+ led_stop_software_blink(led_cdev);
+
+ led_set_brightness_async(led_cdev, led_cdev->delayed_set_value);
+}
+
+/**
+ * led_classdev_suspend - suspend an led_classdev.
+ * @led_cdev: the led_classdev to suspend.
+ */
+void led_classdev_suspend(struct led_classdev *led_cdev)
+{
+ led_cdev->flags |= LED_SUSPENDED;
+ led_cdev->brightness_set(led_cdev, 0);
+}
+EXPORT_SYMBOL_GPL(led_classdev_suspend);
+
+/**
+ * led_classdev_resume - resume an led_classdev.
+ * @led_cdev: the led_classdev to resume.
+ */
+void led_classdev_resume(struct led_classdev *led_cdev)
+{
+ led_cdev->brightness_set(led_cdev, led_cdev->brightness);
+
+ if (led_cdev->flash_resume)
+ led_cdev->flash_resume(led_cdev);
+
+ led_cdev->flags &= ~LED_SUSPENDED;
+}
+EXPORT_SYMBOL_GPL(led_classdev_resume);
+
+#ifdef CONFIG_PM_SLEEP
+static int led_suspend(struct device *dev)
+{
+ struct led_classdev *led_cdev = dev_get_drvdata(dev);
+
+ if (led_cdev->flags & LED_CORE_SUSPENDRESUME)
+ led_classdev_suspend(led_cdev);
+
+ return 0;
+}
+
+static int led_resume(struct device *dev)
+{
+ struct led_classdev *led_cdev = dev_get_drvdata(dev);
+
+ if (led_cdev->flags & LED_CORE_SUSPENDRESUME)
+ led_classdev_resume(led_cdev);
+
+ return 0;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(leds_class_dev_pm_ops, led_suspend, led_resume);
+
+static int match_name(struct device *dev, const void *data)
+{
+ if (!dev_name(dev))
+ return 0;
+ return !strcmp(dev_name(dev), (char *)data);
+}
+
+static int led_classdev_next_name(const char *init_name, char *name,
+ size_t len)
+{
+ unsigned int i = 0;
+ int ret = 0;
+
+ strlcpy(name, init_name, len);
+
+ while (class_find_device(leds_class, NULL, name, match_name) &&
+ (ret < len))
+ ret = snprintf(name, len, "%s_%u", init_name, ++i);
+
+ if (ret >= len)
+ return -ENOMEM;
+
+ return i;
+}
+
+/**
+ * led_classdev_register - register a new object of led_classdev class.
+ * @parent: The device to register.
+ * @led_cdev: the led_classdev structure for this device.
+ */
+int led_classdev_register(struct device *parent, struct led_classdev *led_cdev)
+{
+ char name[64];
+ int ret;
+
+ ret = led_classdev_next_name(led_cdev->name, name, sizeof(name));
+ if (ret < 0)
+ return ret;
+
+ led_cdev->dev = device_create_with_groups(leds_class, parent, 0,
+ led_cdev, led_cdev->groups, "%s", name);
+ if (IS_ERR(led_cdev->dev))
+ return PTR_ERR(led_cdev->dev);
+
+ if (ret)
+ dev_warn(parent, "Led %s renamed to %s due to name collision",
+ led_cdev->name, dev_name(led_cdev->dev));
+
+#ifdef CONFIG_LEDS_TRIGGERS
+ init_rwsem(&led_cdev->trigger_lock);
+#endif
+ mutex_init(&led_cdev->led_access);
+ /* add to the list of leds */
+ down_write(&leds_list_lock);
+ list_add_tail(&led_cdev->node, &leds_list);
+ up_write(&leds_list_lock);
+
+ if (!led_cdev->max_brightness)
+ led_cdev->max_brightness = LED_FULL;
+
+ led_cdev->flags |= SET_BRIGHTNESS_ASYNC;
+
+ led_update_brightness(led_cdev);
+
+ INIT_WORK(&led_cdev->set_brightness_work, set_brightness_delayed);
+
+ setup_timer(&led_cdev->blink_timer, led_timer_function,
+ (unsigned long)led_cdev);
+
+#ifdef CONFIG_LEDS_TRIGGERS
+ led_trigger_set_default(led_cdev);
+#endif
+
+ dev_dbg(parent, "Registered led device: %s\n",
+ led_cdev->name);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(led_classdev_register);
+
+/**
+ * led_classdev_unregister - unregisters a object of led_properties class.
+ * @led_cdev: the led device to unregister
+ *
+ * Unregisters a previously registered via led_classdev_register object.
+ */
+void led_classdev_unregister(struct led_classdev *led_cdev)
+{
+#ifdef CONFIG_LEDS_TRIGGERS
+ down_write(&led_cdev->trigger_lock);
+ if (led_cdev->trigger)
+ led_trigger_set(led_cdev, NULL);
+ up_write(&led_cdev->trigger_lock);
+#endif
+
+ cancel_work_sync(&led_cdev->set_brightness_work);
+
+ /* Stop blinking */
+ led_stop_software_blink(led_cdev);
+ led_set_brightness(led_cdev, LED_OFF);
+
+ device_unregister(led_cdev->dev);
+
+ down_write(&leds_list_lock);
+ list_del(&led_cdev->node);
+ up_write(&leds_list_lock);
+
+ mutex_destroy(&led_cdev->led_access);
+}
+EXPORT_SYMBOL_GPL(led_classdev_unregister);
+
+static void devm_led_classdev_release(struct device *dev, void *res)
+{
+ led_classdev_unregister(*(struct led_classdev **)res);
+}
+
+/**
+ * devm_led_classdev_register - resource managed led_classdev_register()
+ * @parent: The device to register.
+ * @led_cdev: the led_classdev structure for this device.
+ */
+int devm_led_classdev_register(struct device *parent,
+ struct led_classdev *led_cdev)
+{
+ struct led_classdev **dr;
+ int rc;
+
+ dr = devres_alloc(devm_led_classdev_release, sizeof(*dr), GFP_KERNEL);
+ if (!dr)
+ return -ENOMEM;
+
+ rc = led_classdev_register(parent, led_cdev);
+ if (rc) {
+ devres_free(dr);
+ return rc;
+ }
+
+ *dr = led_cdev;
+ devres_add(parent, dr);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(devm_led_classdev_register);
+
+static int devm_led_classdev_match(struct device *dev, void *res, void *data)
+{
+ struct led_cdev **p = res;
+
+ if (WARN_ON(!p || !*p))
+ return 0;
+
+ return *p == data;
+}
+
+/**
+ * devm_led_classdev_unregister() - resource managed led_classdev_unregister()
+ * @parent: The device to unregister.
+ * @led_cdev: the led_classdev structure for this device.
+ */
+void devm_led_classdev_unregister(struct device *dev,
+ struct led_classdev *led_cdev)
+{
+ WARN_ON(devres_release(dev,
+ devm_led_classdev_release,
+ devm_led_classdev_match, led_cdev));
+}
+EXPORT_SYMBOL_GPL(devm_led_classdev_unregister);
+
+static int __init leds_init(void)
+{
+ leds_class = class_create(THIS_MODULE, "leds");
+ if (IS_ERR(leds_class))
+ return PTR_ERR(leds_class);
+ leds_class->pm = &leds_class_dev_pm_ops;
+ leds_class->dev_groups = led_groups;
+ return 0;
+}
+
+static void __exit leds_exit(void)
+{
+ class_destroy(leds_class);
+}
+
+subsys_initcall(leds_init);
+module_exit(leds_exit);
+
+MODULE_AUTHOR("John Lenz, Richard Purdie");
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("LED Class Interface");
diff --git a/kernel/drivers/leds/led-core.c b/kernel/drivers/leds/led-core.c
new file mode 100644
index 000000000..9886dace5
--- /dev/null
+++ b/kernel/drivers/leds/led-core.c
@@ -0,0 +1,175 @@
+/*
+ * LED Class Core
+ *
+ * Copyright 2005-2006 Openedhand Ltd.
+ *
+ * Author: Richard Purdie <rpurdie@openedhand.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/leds.h>
+#include <linux/list.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/rwsem.h>
+#include "leds.h"
+
+DECLARE_RWSEM(leds_list_lock);
+EXPORT_SYMBOL_GPL(leds_list_lock);
+
+LIST_HEAD(leds_list);
+EXPORT_SYMBOL_GPL(leds_list);
+
+static void led_set_software_blink(struct led_classdev *led_cdev,
+ unsigned long delay_on,
+ unsigned long delay_off)
+{
+ int current_brightness;
+
+ current_brightness = led_get_brightness(led_cdev);
+ if (current_brightness)
+ led_cdev->blink_brightness = current_brightness;
+ if (!led_cdev->blink_brightness)
+ led_cdev->blink_brightness = led_cdev->max_brightness;
+
+ led_cdev->blink_delay_on = delay_on;
+ led_cdev->blink_delay_off = delay_off;
+
+ /* never on - just set to off */
+ if (!delay_on) {
+ led_set_brightness_async(led_cdev, LED_OFF);
+ return;
+ }
+
+ /* never off - just set to brightness */
+ if (!delay_off) {
+ led_set_brightness_async(led_cdev, led_cdev->blink_brightness);
+ return;
+ }
+
+ mod_timer(&led_cdev->blink_timer, jiffies + 1);
+}
+
+
+static void led_blink_setup(struct led_classdev *led_cdev,
+ unsigned long *delay_on,
+ unsigned long *delay_off)
+{
+ if (!(led_cdev->flags & LED_BLINK_ONESHOT) &&
+ led_cdev->blink_set &&
+ !led_cdev->blink_set(led_cdev, delay_on, delay_off))
+ return;
+
+ /* blink with 1 Hz as default if nothing specified */
+ if (!*delay_on && !*delay_off)
+ *delay_on = *delay_off = 500;
+
+ led_set_software_blink(led_cdev, *delay_on, *delay_off);
+}
+
+void led_blink_set(struct led_classdev *led_cdev,
+ unsigned long *delay_on,
+ unsigned long *delay_off)
+{
+ del_timer_sync(&led_cdev->blink_timer);
+
+ led_cdev->flags &= ~LED_BLINK_ONESHOT;
+ led_cdev->flags &= ~LED_BLINK_ONESHOT_STOP;
+
+ led_blink_setup(led_cdev, delay_on, delay_off);
+}
+EXPORT_SYMBOL(led_blink_set);
+
+void led_blink_set_oneshot(struct led_classdev *led_cdev,
+ unsigned long *delay_on,
+ unsigned long *delay_off,
+ int invert)
+{
+ if ((led_cdev->flags & LED_BLINK_ONESHOT) &&
+ timer_pending(&led_cdev->blink_timer))
+ return;
+
+ led_cdev->flags |= LED_BLINK_ONESHOT;
+ led_cdev->flags &= ~LED_BLINK_ONESHOT_STOP;
+
+ if (invert)
+ led_cdev->flags |= LED_BLINK_INVERT;
+ else
+ led_cdev->flags &= ~LED_BLINK_INVERT;
+
+ led_blink_setup(led_cdev, delay_on, delay_off);
+}
+EXPORT_SYMBOL(led_blink_set_oneshot);
+
+void led_stop_software_blink(struct led_classdev *led_cdev)
+{
+ del_timer_sync(&led_cdev->blink_timer);
+ led_cdev->blink_delay_on = 0;
+ led_cdev->blink_delay_off = 0;
+}
+EXPORT_SYMBOL_GPL(led_stop_software_blink);
+
+void led_set_brightness(struct led_classdev *led_cdev,
+ enum led_brightness brightness)
+{
+ int ret = 0;
+
+ /* delay brightness setting if need to stop soft-blink timer */
+ if (led_cdev->blink_delay_on || led_cdev->blink_delay_off) {
+ led_cdev->delayed_set_value = brightness;
+ schedule_work(&led_cdev->set_brightness_work);
+ return;
+ }
+
+ if (led_cdev->flags & SET_BRIGHTNESS_ASYNC) {
+ led_set_brightness_async(led_cdev, brightness);
+ return;
+ } else if (led_cdev->flags & SET_BRIGHTNESS_SYNC)
+ ret = led_set_brightness_sync(led_cdev, brightness);
+ else
+ ret = -EINVAL;
+
+ if (ret < 0)
+ dev_dbg(led_cdev->dev, "Setting LED brightness failed (%d)\n",
+ ret);
+}
+EXPORT_SYMBOL(led_set_brightness);
+
+int led_update_brightness(struct led_classdev *led_cdev)
+{
+ int ret = 0;
+
+ if (led_cdev->brightness_get) {
+ ret = led_cdev->brightness_get(led_cdev);
+ if (ret >= 0) {
+ led_cdev->brightness = ret;
+ return 0;
+ }
+ }
+
+ return ret;
+}
+EXPORT_SYMBOL(led_update_brightness);
+
+/* Caller must ensure led_cdev->led_access held */
+void led_sysfs_disable(struct led_classdev *led_cdev)
+{
+ lockdep_assert_held(&led_cdev->led_access);
+
+ led_cdev->flags |= LED_SYSFS_DISABLE;
+}
+EXPORT_SYMBOL_GPL(led_sysfs_disable);
+
+/* Caller must ensure led_cdev->led_access held */
+void led_sysfs_enable(struct led_classdev *led_cdev)
+{
+ lockdep_assert_held(&led_cdev->led_access);
+
+ led_cdev->flags &= ~LED_SYSFS_DISABLE;
+}
+EXPORT_SYMBOL_GPL(led_sysfs_enable);
diff --git a/kernel/drivers/leds/led-triggers.c b/kernel/drivers/leds/led-triggers.c
new file mode 100644
index 000000000..e8b1120f4
--- /dev/null
+++ b/kernel/drivers/leds/led-triggers.c
@@ -0,0 +1,342 @@
+/*
+ * LED Triggers Core
+ *
+ * Copyright 2005-2007 Openedhand Ltd.
+ *
+ * Author: Richard Purdie <rpurdie@openedhand.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/spinlock.h>
+#include <linux/device.h>
+#include <linux/timer.h>
+#include <linux/rwsem.h>
+#include <linux/leds.h>
+#include <linux/slab.h>
+#include "leds.h"
+
+/*
+ * Nests outside led_cdev->trigger_lock
+ */
+static DECLARE_RWSEM(triggers_list_lock);
+static LIST_HEAD(trigger_list);
+
+ /* Used by LED Class */
+
+ssize_t led_trigger_store(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct led_classdev *led_cdev = dev_get_drvdata(dev);
+ char trigger_name[TRIG_NAME_MAX];
+ struct led_trigger *trig;
+ size_t len;
+ int ret = count;
+
+ mutex_lock(&led_cdev->led_access);
+
+ if (led_sysfs_is_disabled(led_cdev)) {
+ ret = -EBUSY;
+ goto unlock;
+ }
+
+ trigger_name[sizeof(trigger_name) - 1] = '\0';
+ strncpy(trigger_name, buf, sizeof(trigger_name) - 1);
+ len = strlen(trigger_name);
+
+ if (len && trigger_name[len - 1] == '\n')
+ trigger_name[len - 1] = '\0';
+
+ if (!strcmp(trigger_name, "none")) {
+ led_trigger_remove(led_cdev);
+ goto unlock;
+ }
+
+ down_read(&triggers_list_lock);
+ list_for_each_entry(trig, &trigger_list, next_trig) {
+ if (!strcmp(trigger_name, trig->name)) {
+ down_write(&led_cdev->trigger_lock);
+ led_trigger_set(led_cdev, trig);
+ up_write(&led_cdev->trigger_lock);
+
+ up_read(&triggers_list_lock);
+ goto unlock;
+ }
+ }
+ up_read(&triggers_list_lock);
+
+unlock:
+ mutex_unlock(&led_cdev->led_access);
+ return ret;
+}
+EXPORT_SYMBOL_GPL(led_trigger_store);
+
+ssize_t led_trigger_show(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct led_classdev *led_cdev = dev_get_drvdata(dev);
+ struct led_trigger *trig;
+ int len = 0;
+
+ down_read(&triggers_list_lock);
+ down_read(&led_cdev->trigger_lock);
+
+ if (!led_cdev->trigger)
+ len += sprintf(buf+len, "[none] ");
+ else
+ len += sprintf(buf+len, "none ");
+
+ list_for_each_entry(trig, &trigger_list, next_trig) {
+ if (led_cdev->trigger && !strcmp(led_cdev->trigger->name,
+ trig->name))
+ len += sprintf(buf+len, "[%s] ", trig->name);
+ else
+ len += sprintf(buf+len, "%s ", trig->name);
+ }
+ up_read(&led_cdev->trigger_lock);
+ up_read(&triggers_list_lock);
+
+ len += sprintf(len+buf, "\n");
+ return len;
+}
+EXPORT_SYMBOL_GPL(led_trigger_show);
+
+/* Caller must ensure led_cdev->trigger_lock held */
+void led_trigger_set(struct led_classdev *led_cdev, struct led_trigger *trig)
+{
+ unsigned long flags;
+ char *event = NULL;
+ char *envp[2];
+ const char *name;
+
+ name = trig ? trig->name : "none";
+ event = kasprintf(GFP_KERNEL, "TRIGGER=%s", name);
+
+ /* Remove any existing trigger */
+ if (led_cdev->trigger) {
+ write_lock_irqsave(&led_cdev->trigger->leddev_list_lock, flags);
+ list_del(&led_cdev->trig_list);
+ write_unlock_irqrestore(&led_cdev->trigger->leddev_list_lock,
+ flags);
+ cancel_work_sync(&led_cdev->set_brightness_work);
+ led_stop_software_blink(led_cdev);
+ if (led_cdev->trigger->deactivate)
+ led_cdev->trigger->deactivate(led_cdev);
+ led_cdev->trigger = NULL;
+ led_set_brightness(led_cdev, LED_OFF);
+ }
+ if (trig) {
+ write_lock_irqsave(&trig->leddev_list_lock, flags);
+ list_add_tail(&led_cdev->trig_list, &trig->led_cdevs);
+ write_unlock_irqrestore(&trig->leddev_list_lock, flags);
+ led_cdev->trigger = trig;
+ if (trig->activate)
+ trig->activate(led_cdev);
+ }
+
+ if (event) {
+ envp[0] = event;
+ envp[1] = NULL;
+ kobject_uevent_env(&led_cdev->dev->kobj, KOBJ_CHANGE, envp);
+ kfree(event);
+ }
+}
+EXPORT_SYMBOL_GPL(led_trigger_set);
+
+void led_trigger_remove(struct led_classdev *led_cdev)
+{
+ down_write(&led_cdev->trigger_lock);
+ led_trigger_set(led_cdev, NULL);
+ up_write(&led_cdev->trigger_lock);
+}
+EXPORT_SYMBOL_GPL(led_trigger_remove);
+
+void led_trigger_set_default(struct led_classdev *led_cdev)
+{
+ struct led_trigger *trig;
+
+ if (!led_cdev->default_trigger)
+ return;
+
+ down_read(&triggers_list_lock);
+ down_write(&led_cdev->trigger_lock);
+ list_for_each_entry(trig, &trigger_list, next_trig) {
+ if (!strcmp(led_cdev->default_trigger, trig->name))
+ led_trigger_set(led_cdev, trig);
+ }
+ up_write(&led_cdev->trigger_lock);
+ up_read(&triggers_list_lock);
+}
+EXPORT_SYMBOL_GPL(led_trigger_set_default);
+
+void led_trigger_rename_static(const char *name, struct led_trigger *trig)
+{
+ /* new name must be on a temporary string to prevent races */
+ BUG_ON(name == trig->name);
+
+ down_write(&triggers_list_lock);
+ /* this assumes that trig->name was originaly allocated to
+ * non constant storage */
+ strcpy((char *)trig->name, name);
+ up_write(&triggers_list_lock);
+}
+EXPORT_SYMBOL_GPL(led_trigger_rename_static);
+
+/* LED Trigger Interface */
+
+int led_trigger_register(struct led_trigger *trig)
+{
+ struct led_classdev *led_cdev;
+ struct led_trigger *_trig;
+
+ rwlock_init(&trig->leddev_list_lock);
+ INIT_LIST_HEAD(&trig->led_cdevs);
+
+ down_write(&triggers_list_lock);
+ /* Make sure the trigger's name isn't already in use */
+ list_for_each_entry(_trig, &trigger_list, next_trig) {
+ if (!strcmp(_trig->name, trig->name)) {
+ up_write(&triggers_list_lock);
+ return -EEXIST;
+ }
+ }
+ /* Add to the list of led triggers */
+ list_add_tail(&trig->next_trig, &trigger_list);
+ up_write(&triggers_list_lock);
+
+ /* Register with any LEDs that have this as a default trigger */
+ down_read(&leds_list_lock);
+ list_for_each_entry(led_cdev, &leds_list, node) {
+ down_write(&led_cdev->trigger_lock);
+ if (!led_cdev->trigger && led_cdev->default_trigger &&
+ !strcmp(led_cdev->default_trigger, trig->name))
+ led_trigger_set(led_cdev, trig);
+ up_write(&led_cdev->trigger_lock);
+ }
+ up_read(&leds_list_lock);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(led_trigger_register);
+
+void led_trigger_unregister(struct led_trigger *trig)
+{
+ struct led_classdev *led_cdev;
+
+ if (list_empty_careful(&trig->next_trig))
+ return;
+
+ /* Remove from the list of led triggers */
+ down_write(&triggers_list_lock);
+ list_del_init(&trig->next_trig);
+ up_write(&triggers_list_lock);
+
+ /* Remove anyone actively using this trigger */
+ down_read(&leds_list_lock);
+ list_for_each_entry(led_cdev, &leds_list, node) {
+ down_write(&led_cdev->trigger_lock);
+ if (led_cdev->trigger == trig)
+ led_trigger_set(led_cdev, NULL);
+ up_write(&led_cdev->trigger_lock);
+ }
+ up_read(&leds_list_lock);
+}
+EXPORT_SYMBOL_GPL(led_trigger_unregister);
+
+/* Simple LED Tigger Interface */
+
+void led_trigger_event(struct led_trigger *trig,
+ enum led_brightness brightness)
+{
+ struct led_classdev *led_cdev;
+
+ if (!trig)
+ return;
+
+ read_lock(&trig->leddev_list_lock);
+ list_for_each_entry(led_cdev, &trig->led_cdevs, trig_list)
+ led_set_brightness(led_cdev, brightness);
+ read_unlock(&trig->leddev_list_lock);
+}
+EXPORT_SYMBOL_GPL(led_trigger_event);
+
+static void led_trigger_blink_setup(struct led_trigger *trig,
+ unsigned long *delay_on,
+ unsigned long *delay_off,
+ int oneshot,
+ int invert)
+{
+ struct led_classdev *led_cdev;
+
+ if (!trig)
+ return;
+
+ read_lock(&trig->leddev_list_lock);
+ list_for_each_entry(led_cdev, &trig->led_cdevs, trig_list) {
+ if (oneshot)
+ led_blink_set_oneshot(led_cdev, delay_on, delay_off,
+ invert);
+ else
+ led_blink_set(led_cdev, delay_on, delay_off);
+ }
+ read_unlock(&trig->leddev_list_lock);
+}
+
+void led_trigger_blink(struct led_trigger *trig,
+ unsigned long *delay_on,
+ unsigned long *delay_off)
+{
+ led_trigger_blink_setup(trig, delay_on, delay_off, 0, 0);
+}
+EXPORT_SYMBOL_GPL(led_trigger_blink);
+
+void led_trigger_blink_oneshot(struct led_trigger *trig,
+ unsigned long *delay_on,
+ unsigned long *delay_off,
+ int invert)
+{
+ led_trigger_blink_setup(trig, delay_on, delay_off, 1, invert);
+}
+EXPORT_SYMBOL_GPL(led_trigger_blink_oneshot);
+
+void led_trigger_register_simple(const char *name, struct led_trigger **tp)
+{
+ struct led_trigger *trig;
+ int err;
+
+ trig = kzalloc(sizeof(struct led_trigger), GFP_KERNEL);
+
+ if (trig) {
+ trig->name = name;
+ err = led_trigger_register(trig);
+ if (err < 0) {
+ kfree(trig);
+ trig = NULL;
+ pr_warn("LED trigger %s failed to register (%d)\n",
+ name, err);
+ }
+ } else {
+ pr_warn("LED trigger %s failed to register (no memory)\n",
+ name);
+ }
+ *tp = trig;
+}
+EXPORT_SYMBOL_GPL(led_trigger_register_simple);
+
+void led_trigger_unregister_simple(struct led_trigger *trig)
+{
+ if (trig)
+ led_trigger_unregister(trig);
+ kfree(trig);
+}
+EXPORT_SYMBOL_GPL(led_trigger_unregister_simple);
+
+MODULE_AUTHOR("Richard Purdie");
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("LED Triggers Core");
diff --git a/kernel/drivers/leds/leds-88pm860x.c b/kernel/drivers/leds/leds-88pm860x.c
new file mode 100644
index 000000000..1497a0916
--- /dev/null
+++ b/kernel/drivers/leds/leds-88pm860x.c
@@ -0,0 +1,250 @@
+/*
+ * LED driver for Marvell 88PM860x
+ *
+ * Copyright (C) 2009 Marvell International Ltd.
+ * Haojian Zhuang <haojian.zhuang@marvell.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/i2c.h>
+#include <linux/leds.h>
+#include <linux/slab.h>
+#include <linux/workqueue.h>
+#include <linux/mfd/88pm860x.h>
+#include <linux/module.h>
+
+#define LED_PWM_MASK (0x1F)
+#define LED_CURRENT_MASK (0x07 << 5)
+
+#define LED_BLINK_MASK (0x7F)
+
+#define LED_ON_CONTINUOUS (0x0F << 3)
+
+#define LED1_BLINK_EN (1 << 1)
+#define LED2_BLINK_EN (1 << 2)
+
+struct pm860x_led {
+ struct led_classdev cdev;
+ struct i2c_client *i2c;
+ struct work_struct work;
+ struct pm860x_chip *chip;
+ struct mutex lock;
+ char name[MFD_NAME_SIZE];
+
+ int port;
+ int iset;
+ unsigned char brightness;
+ unsigned char current_brightness;
+
+ int reg_control;
+ int reg_blink;
+ int blink_mask;
+};
+
+static int led_power_set(struct pm860x_chip *chip, int port, int on)
+{
+ int ret = -EINVAL;
+
+ switch (port) {
+ case 0:
+ case 1:
+ case 2:
+ ret = on ? pm8606_osc_enable(chip, RGB1_ENABLE) :
+ pm8606_osc_disable(chip, RGB1_ENABLE);
+ break;
+ case 3:
+ case 4:
+ case 5:
+ ret = on ? pm8606_osc_enable(chip, RGB2_ENABLE) :
+ pm8606_osc_disable(chip, RGB2_ENABLE);
+ break;
+ }
+ return ret;
+}
+
+static void pm860x_led_work(struct work_struct *work)
+{
+
+ struct pm860x_led *led;
+ struct pm860x_chip *chip;
+ unsigned char buf[3];
+ int ret;
+
+ led = container_of(work, struct pm860x_led, work);
+ chip = led->chip;
+ mutex_lock(&led->lock);
+ if ((led->current_brightness == 0) && led->brightness) {
+ led_power_set(chip, led->port, 1);
+ if (led->iset) {
+ pm860x_set_bits(led->i2c, led->reg_control,
+ LED_CURRENT_MASK, led->iset);
+ }
+ pm860x_set_bits(led->i2c, led->reg_blink,
+ LED_BLINK_MASK, LED_ON_CONTINUOUS);
+ pm860x_set_bits(led->i2c, PM8606_WLED3B, led->blink_mask,
+ led->blink_mask);
+ }
+ pm860x_set_bits(led->i2c, led->reg_control, LED_PWM_MASK,
+ led->brightness);
+
+ if (led->brightness == 0) {
+ pm860x_bulk_read(led->i2c, led->reg_control, 3, buf);
+ ret = buf[0] & LED_PWM_MASK;
+ ret |= buf[1] & LED_PWM_MASK;
+ ret |= buf[2] & LED_PWM_MASK;
+ if (ret == 0) {
+ /* unset current since no led is lighting */
+ pm860x_set_bits(led->i2c, led->reg_control,
+ LED_CURRENT_MASK, 0);
+ pm860x_set_bits(led->i2c, PM8606_WLED3B,
+ led->blink_mask, 0);
+ led_power_set(chip, led->port, 0);
+ }
+ }
+ led->current_brightness = led->brightness;
+ dev_dbg(chip->dev, "Update LED. (reg:%d, brightness:%d)\n",
+ led->reg_control, led->brightness);
+ mutex_unlock(&led->lock);
+}
+
+static void pm860x_led_set(struct led_classdev *cdev,
+ enum led_brightness value)
+{
+ struct pm860x_led *data = container_of(cdev, struct pm860x_led, cdev);
+
+ data->brightness = value >> 3;
+ schedule_work(&data->work);
+}
+
+#ifdef CONFIG_OF
+static int pm860x_led_dt_init(struct platform_device *pdev,
+ struct pm860x_led *data)
+{
+ struct device_node *nproot, *np;
+ int iset = 0;
+
+ if (!pdev->dev.parent->of_node)
+ return -ENODEV;
+ nproot = of_get_child_by_name(pdev->dev.parent->of_node, "leds");
+ if (!nproot) {
+ dev_err(&pdev->dev, "failed to find leds node\n");
+ return -ENODEV;
+ }
+ for_each_child_of_node(nproot, np) {
+ if (!of_node_cmp(np->name, data->name)) {
+ of_property_read_u32(np, "marvell,88pm860x-iset",
+ &iset);
+ data->iset = PM8606_LED_CURRENT(iset);
+ break;
+ }
+ }
+ of_node_put(nproot);
+ return 0;
+}
+#else
+#define pm860x_led_dt_init(x, y) (-1)
+#endif
+
+static int pm860x_led_probe(struct platform_device *pdev)
+{
+ struct pm860x_chip *chip = dev_get_drvdata(pdev->dev.parent);
+ struct pm860x_led_pdata *pdata = dev_get_platdata(&pdev->dev);
+ struct pm860x_led *data;
+ struct resource *res;
+ int ret = 0;
+
+ data = devm_kzalloc(&pdev->dev, sizeof(struct pm860x_led), GFP_KERNEL);
+ if (data == NULL)
+ return -ENOMEM;
+ res = platform_get_resource_byname(pdev, IORESOURCE_REG, "control");
+ if (!res) {
+ dev_err(&pdev->dev, "No REG resource for control\n");
+ return -ENXIO;
+ }
+ data->reg_control = res->start;
+ res = platform_get_resource_byname(pdev, IORESOURCE_REG, "blink");
+ if (!res) {
+ dev_err(&pdev->dev, "No REG resource for blink\n");
+ return -ENXIO;
+ }
+ data->reg_blink = res->start;
+ memset(data->name, 0, MFD_NAME_SIZE);
+ switch (pdev->id) {
+ case 0:
+ data->blink_mask = LED1_BLINK_EN;
+ sprintf(data->name, "led0-red");
+ break;
+ case 1:
+ data->blink_mask = LED1_BLINK_EN;
+ sprintf(data->name, "led0-green");
+ break;
+ case 2:
+ data->blink_mask = LED1_BLINK_EN;
+ sprintf(data->name, "led0-blue");
+ break;
+ case 3:
+ data->blink_mask = LED2_BLINK_EN;
+ sprintf(data->name, "led1-red");
+ break;
+ case 4:
+ data->blink_mask = LED2_BLINK_EN;
+ sprintf(data->name, "led1-green");
+ break;
+ case 5:
+ data->blink_mask = LED2_BLINK_EN;
+ sprintf(data->name, "led1-blue");
+ break;
+ }
+ platform_set_drvdata(pdev, data);
+ data->chip = chip;
+ data->i2c = (chip->id == CHIP_PM8606) ? chip->client : chip->companion;
+ data->port = pdev->id;
+ if (pm860x_led_dt_init(pdev, data))
+ if (pdata)
+ data->iset = pdata->iset;
+
+ data->current_brightness = 0;
+ data->cdev.name = data->name;
+ data->cdev.brightness_set = pm860x_led_set;
+ mutex_init(&data->lock);
+ INIT_WORK(&data->work, pm860x_led_work);
+
+ ret = led_classdev_register(chip->dev, &data->cdev);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "Failed to register LED: %d\n", ret);
+ return ret;
+ }
+ pm860x_led_set(&data->cdev, 0);
+ return 0;
+}
+
+static int pm860x_led_remove(struct platform_device *pdev)
+{
+ struct pm860x_led *data = platform_get_drvdata(pdev);
+
+ led_classdev_unregister(&data->cdev);
+
+ return 0;
+}
+
+static struct platform_driver pm860x_led_driver = {
+ .driver = {
+ .name = "88pm860x-led",
+ },
+ .probe = pm860x_led_probe,
+ .remove = pm860x_led_remove,
+};
+
+module_platform_driver(pm860x_led_driver);
+
+MODULE_DESCRIPTION("LED driver for Marvell PM860x");
+MODULE_AUTHOR("Haojian Zhuang <haojian.zhuang@marvell.com>");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:88pm860x-led");
diff --git a/kernel/drivers/leds/leds-adp5520.c b/kernel/drivers/leds/leds-adp5520.c
new file mode 100644
index 000000000..07e66cae3
--- /dev/null
+++ b/kernel/drivers/leds/leds-adp5520.c
@@ -0,0 +1,214 @@
+/*
+ * LEDs driver for Analog Devices ADP5520/ADP5501 MFD PMICs
+ *
+ * Copyright 2009 Analog Devices Inc.
+ *
+ * Loosely derived from leds-da903x:
+ * Copyright (C) 2008 Compulab, Ltd.
+ * Mike Rapoport <mike@compulab.co.il>
+ *
+ * Copyright (C) 2006-2008 Marvell International Ltd.
+ * Eric Miao <eric.miao@marvell.com>
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/leds.h>
+#include <linux/workqueue.h>
+#include <linux/mfd/adp5520.h>
+#include <linux/slab.h>
+
+struct adp5520_led {
+ struct led_classdev cdev;
+ struct work_struct work;
+ struct device *master;
+ enum led_brightness new_brightness;
+ int id;
+ int flags;
+};
+
+static void adp5520_led_work(struct work_struct *work)
+{
+ struct adp5520_led *led = container_of(work, struct adp5520_led, work);
+ adp5520_write(led->master, ADP5520_LED1_CURRENT + led->id - 1,
+ led->new_brightness >> 2);
+}
+
+static void adp5520_led_set(struct led_classdev *led_cdev,
+ enum led_brightness value)
+{
+ struct adp5520_led *led;
+
+ led = container_of(led_cdev, struct adp5520_led, cdev);
+ led->new_brightness = value;
+ schedule_work(&led->work);
+}
+
+static int adp5520_led_setup(struct adp5520_led *led)
+{
+ struct device *dev = led->master;
+ int flags = led->flags;
+ int ret = 0;
+
+ switch (led->id) {
+ case FLAG_ID_ADP5520_LED1_ADP5501_LED0:
+ ret |= adp5520_set_bits(dev, ADP5520_LED_TIME,
+ (flags >> ADP5520_FLAG_OFFT_SHIFT) &
+ ADP5520_FLAG_OFFT_MASK);
+ ret |= adp5520_set_bits(dev, ADP5520_LED_CONTROL,
+ ADP5520_LED1_EN);
+ break;
+ case FLAG_ID_ADP5520_LED2_ADP5501_LED1:
+ ret |= adp5520_set_bits(dev, ADP5520_LED_TIME,
+ ((flags >> ADP5520_FLAG_OFFT_SHIFT) &
+ ADP5520_FLAG_OFFT_MASK) << 2);
+ ret |= adp5520_clr_bits(dev, ADP5520_LED_CONTROL,
+ ADP5520_R3_MODE);
+ ret |= adp5520_set_bits(dev, ADP5520_LED_CONTROL,
+ ADP5520_LED2_EN);
+ break;
+ case FLAG_ID_ADP5520_LED3_ADP5501_LED2:
+ ret |= adp5520_set_bits(dev, ADP5520_LED_TIME,
+ ((flags >> ADP5520_FLAG_OFFT_SHIFT) &
+ ADP5520_FLAG_OFFT_MASK) << 4);
+ ret |= adp5520_clr_bits(dev, ADP5520_LED_CONTROL,
+ ADP5520_C3_MODE);
+ ret |= adp5520_set_bits(dev, ADP5520_LED_CONTROL,
+ ADP5520_LED3_EN);
+ break;
+ }
+
+ return ret;
+}
+
+static int adp5520_led_prepare(struct platform_device *pdev)
+{
+ struct adp5520_leds_platform_data *pdata = dev_get_platdata(&pdev->dev);
+ struct device *dev = pdev->dev.parent;
+ int ret = 0;
+
+ ret |= adp5520_write(dev, ADP5520_LED1_CURRENT, 0);
+ ret |= adp5520_write(dev, ADP5520_LED2_CURRENT, 0);
+ ret |= adp5520_write(dev, ADP5520_LED3_CURRENT, 0);
+ ret |= adp5520_write(dev, ADP5520_LED_TIME, pdata->led_on_time << 6);
+ ret |= adp5520_write(dev, ADP5520_LED_FADE, FADE_VAL(pdata->fade_in,
+ pdata->fade_out));
+
+ return ret;
+}
+
+static int adp5520_led_probe(struct platform_device *pdev)
+{
+ struct adp5520_leds_platform_data *pdata = dev_get_platdata(&pdev->dev);
+ struct adp5520_led *led, *led_dat;
+ struct led_info *cur_led;
+ int ret, i;
+
+ if (pdata == NULL) {
+ dev_err(&pdev->dev, "missing platform data\n");
+ return -ENODEV;
+ }
+
+ if (pdata->num_leds > ADP5520_01_MAXLEDS) {
+ dev_err(&pdev->dev, "can't handle more than %d LEDS\n",
+ ADP5520_01_MAXLEDS);
+ return -EFAULT;
+ }
+
+ led = devm_kzalloc(&pdev->dev, sizeof(*led) * pdata->num_leds,
+ GFP_KERNEL);
+ if (!led)
+ return -ENOMEM;
+
+ ret = adp5520_led_prepare(pdev);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to write\n");
+ return ret;
+ }
+
+ for (i = 0; i < pdata->num_leds; ++i) {
+ cur_led = &pdata->leds[i];
+ led_dat = &led[i];
+
+ led_dat->cdev.name = cur_led->name;
+ led_dat->cdev.default_trigger = cur_led->default_trigger;
+ led_dat->cdev.brightness_set = adp5520_led_set;
+ led_dat->cdev.brightness = LED_OFF;
+
+ if (cur_led->flags & ADP5520_FLAG_LED_MASK)
+ led_dat->flags = cur_led->flags;
+ else
+ led_dat->flags = i + 1;
+
+ led_dat->id = led_dat->flags & ADP5520_FLAG_LED_MASK;
+
+ led_dat->master = pdev->dev.parent;
+ led_dat->new_brightness = LED_OFF;
+
+ INIT_WORK(&led_dat->work, adp5520_led_work);
+
+ ret = led_classdev_register(led_dat->master, &led_dat->cdev);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to register LED %d\n",
+ led_dat->id);
+ goto err;
+ }
+
+ ret = adp5520_led_setup(led_dat);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to write\n");
+ i++;
+ goto err;
+ }
+ }
+
+ platform_set_drvdata(pdev, led);
+ return 0;
+
+err:
+ if (i > 0) {
+ for (i = i - 1; i >= 0; i--) {
+ led_classdev_unregister(&led[i].cdev);
+ cancel_work_sync(&led[i].work);
+ }
+ }
+
+ return ret;
+}
+
+static int adp5520_led_remove(struct platform_device *pdev)
+{
+ struct adp5520_leds_platform_data *pdata = dev_get_platdata(&pdev->dev);
+ struct adp5520_led *led;
+ int i;
+
+ led = platform_get_drvdata(pdev);
+
+ adp5520_clr_bits(led->master, ADP5520_LED_CONTROL,
+ ADP5520_LED1_EN | ADP5520_LED2_EN | ADP5520_LED3_EN);
+
+ for (i = 0; i < pdata->num_leds; i++) {
+ led_classdev_unregister(&led[i].cdev);
+ cancel_work_sync(&led[i].work);
+ }
+
+ return 0;
+}
+
+static struct platform_driver adp5520_led_driver = {
+ .driver = {
+ .name = "adp5520-led",
+ },
+ .probe = adp5520_led_probe,
+ .remove = adp5520_led_remove,
+};
+
+module_platform_driver(adp5520_led_driver);
+
+MODULE_AUTHOR("Michael Hennerich <hennerich@blackfin.uclinux.org>");
+MODULE_DESCRIPTION("LEDS ADP5520(01) Driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:adp5520-led");
diff --git a/kernel/drivers/leds/leds-asic3.c b/kernel/drivers/leds/leds-asic3.c
new file mode 100644
index 000000000..1b71eac63
--- /dev/null
+++ b/kernel/drivers/leds/leds-asic3.c
@@ -0,0 +1,180 @@
+/*
+ * Copyright (C) 2011 Paul Parsons <lost.distance@yahoo.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/leds.h>
+#include <linux/slab.h>
+
+#include <linux/mfd/asic3.h>
+#include <linux/mfd/core.h>
+#include <linux/module.h>
+
+/*
+ * The HTC ASIC3 LED GPIOs are inputs, not outputs.
+ * Hence we turn the LEDs on/off via the TimeBase register.
+ */
+
+/*
+ * When TimeBase is 4 the clock resolution is about 32Hz.
+ * This driver supports hardware blinking with an on+off
+ * period from 62ms (2 clocks) to 125s (4000 clocks).
+ */
+#define MS_TO_CLK(ms) DIV_ROUND_CLOSEST(((ms)*1024), 32000)
+#define CLK_TO_MS(clk) (((clk)*32000)/1024)
+#define MAX_CLK 4000 /* Fits into 12-bit Time registers */
+#define MAX_MS CLK_TO_MS(MAX_CLK)
+
+static const unsigned int led_n_base[ASIC3_NUM_LEDS] = {
+ [0] = ASIC3_LED_0_Base,
+ [1] = ASIC3_LED_1_Base,
+ [2] = ASIC3_LED_2_Base,
+};
+
+static void brightness_set(struct led_classdev *cdev,
+ enum led_brightness value)
+{
+ struct platform_device *pdev = to_platform_device(cdev->dev->parent);
+ const struct mfd_cell *cell = mfd_get_cell(pdev);
+ struct asic3 *asic = dev_get_drvdata(pdev->dev.parent);
+ u32 timebase;
+ unsigned int base;
+
+ timebase = (value == LED_OFF) ? 0 : (LED_EN|0x4);
+
+ base = led_n_base[cell->id];
+ asic3_write_register(asic, (base + ASIC3_LED_PeriodTime), 32);
+ asic3_write_register(asic, (base + ASIC3_LED_DutyTime), 32);
+ asic3_write_register(asic, (base + ASIC3_LED_AutoStopCount), 0);
+ asic3_write_register(asic, (base + ASIC3_LED_TimeBase), timebase);
+}
+
+static int blink_set(struct led_classdev *cdev,
+ unsigned long *delay_on,
+ unsigned long *delay_off)
+{
+ struct platform_device *pdev = to_platform_device(cdev->dev->parent);
+ const struct mfd_cell *cell = mfd_get_cell(pdev);
+ struct asic3 *asic = dev_get_drvdata(pdev->dev.parent);
+ u32 on;
+ u32 off;
+ unsigned int base;
+
+ if (*delay_on > MAX_MS || *delay_off > MAX_MS)
+ return -EINVAL;
+
+ if (*delay_on == 0 && *delay_off == 0) {
+ /* If both are zero then a sensible default should be chosen */
+ on = MS_TO_CLK(500);
+ off = MS_TO_CLK(500);
+ } else {
+ on = MS_TO_CLK(*delay_on);
+ off = MS_TO_CLK(*delay_off);
+ if ((on + off) > MAX_CLK)
+ return -EINVAL;
+ }
+
+ base = led_n_base[cell->id];
+ asic3_write_register(asic, (base + ASIC3_LED_PeriodTime), (on + off));
+ asic3_write_register(asic, (base + ASIC3_LED_DutyTime), on);
+ asic3_write_register(asic, (base + ASIC3_LED_AutoStopCount), 0);
+ asic3_write_register(asic, (base + ASIC3_LED_TimeBase), (LED_EN|0x4));
+
+ *delay_on = CLK_TO_MS(on);
+ *delay_off = CLK_TO_MS(off);
+
+ return 0;
+}
+
+static int asic3_led_probe(struct platform_device *pdev)
+{
+ struct asic3_led *led = dev_get_platdata(&pdev->dev);
+ int ret;
+
+ ret = mfd_cell_enable(pdev);
+ if (ret < 0)
+ return ret;
+
+ led->cdev = devm_kzalloc(&pdev->dev, sizeof(struct led_classdev),
+ GFP_KERNEL);
+ if (!led->cdev) {
+ ret = -ENOMEM;
+ goto out;
+ }
+
+ led->cdev->name = led->name;
+ led->cdev->flags = LED_CORE_SUSPENDRESUME;
+ led->cdev->brightness_set = brightness_set;
+ led->cdev->blink_set = blink_set;
+ led->cdev->default_trigger = led->default_trigger;
+
+ ret = led_classdev_register(&pdev->dev, led->cdev);
+ if (ret < 0)
+ goto out;
+
+ return 0;
+
+out:
+ (void) mfd_cell_disable(pdev);
+ return ret;
+}
+
+static int asic3_led_remove(struct platform_device *pdev)
+{
+ struct asic3_led *led = dev_get_platdata(&pdev->dev);
+
+ led_classdev_unregister(led->cdev);
+
+ return mfd_cell_disable(pdev);
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int asic3_led_suspend(struct device *dev)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ const struct mfd_cell *cell = mfd_get_cell(pdev);
+ int ret;
+
+ ret = 0;
+ if (cell->suspend)
+ ret = (*cell->suspend)(pdev);
+
+ return ret;
+}
+
+static int asic3_led_resume(struct device *dev)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ const struct mfd_cell *cell = mfd_get_cell(pdev);
+ int ret;
+
+ ret = 0;
+ if (cell->resume)
+ ret = (*cell->resume)(pdev);
+
+ return ret;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(asic3_led_pm_ops, asic3_led_suspend, asic3_led_resume);
+
+static struct platform_driver asic3_led_driver = {
+ .probe = asic3_led_probe,
+ .remove = asic3_led_remove,
+ .driver = {
+ .name = "leds-asic3",
+ .pm = &asic3_led_pm_ops,
+ },
+};
+
+module_platform_driver(asic3_led_driver);
+
+MODULE_AUTHOR("Paul Parsons <lost.distance@yahoo.com>");
+MODULE_DESCRIPTION("HTC ASIC3 LED driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:leds-asic3");
diff --git a/kernel/drivers/leds/leds-bd2802.c b/kernel/drivers/leds/leds-bd2802.c
new file mode 100644
index 000000000..6078c15d3
--- /dev/null
+++ b/kernel/drivers/leds/leds-bd2802.c
@@ -0,0 +1,809 @@
+/*
+ * leds-bd2802.c - RGB LED Driver
+ *
+ * Copyright (C) 2009 Samsung Electronics
+ * Kim Kyuwon <q1.kim@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Datasheet: http://www.rohm.com/products/databook/driver/pdf/bd2802gu-e.pdf
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/i2c.h>
+#include <linux/gpio.h>
+#include <linux/delay.h>
+#include <linux/leds.h>
+#include <linux/leds-bd2802.h>
+#include <linux/slab.h>
+#include <linux/pm.h>
+
+#define LED_CTL(rgb2en, rgb1en) ((rgb2en) << 4 | ((rgb1en) << 0))
+
+#define BD2802_LED_OFFSET 0xa
+#define BD2802_COLOR_OFFSET 0x3
+
+#define BD2802_REG_CLKSETUP 0x00
+#define BD2802_REG_CONTROL 0x01
+#define BD2802_REG_HOURSETUP 0x02
+#define BD2802_REG_CURRENT1SETUP 0x03
+#define BD2802_REG_CURRENT2SETUP 0x04
+#define BD2802_REG_WAVEPATTERN 0x05
+
+#define BD2802_CURRENT_032 0x10 /* 3.2mA */
+#define BD2802_CURRENT_000 0x00 /* 0.0mA */
+
+#define BD2802_PATTERN_FULL 0x07
+#define BD2802_PATTERN_HALF 0x03
+
+enum led_ids {
+ LED1,
+ LED2,
+ LED_NUM,
+};
+
+enum led_colors {
+ RED,
+ GREEN,
+ BLUE,
+};
+
+enum led_bits {
+ BD2802_OFF,
+ BD2802_BLINK,
+ BD2802_ON,
+};
+
+/*
+ * State '0' : 'off'
+ * State '1' : 'blink'
+ * State '2' : 'on'.
+ */
+struct led_state {
+ unsigned r:2;
+ unsigned g:2;
+ unsigned b:2;
+};
+
+struct bd2802_led {
+ struct bd2802_led_platform_data *pdata;
+ struct i2c_client *client;
+ struct rw_semaphore rwsem;
+ struct work_struct work;
+
+ struct led_state led[2];
+
+ /*
+ * Making led_classdev as array is not recommended, because array
+ * members prevent using 'container_of' macro. So repetitive works
+ * are needed.
+ */
+ struct led_classdev cdev_led1r;
+ struct led_classdev cdev_led1g;
+ struct led_classdev cdev_led1b;
+ struct led_classdev cdev_led2r;
+ struct led_classdev cdev_led2g;
+ struct led_classdev cdev_led2b;
+
+ /*
+ * Advanced Configuration Function(ADF) mode:
+ * In ADF mode, user can set registers of BD2802GU directly,
+ * therefore BD2802GU doesn't enter reset state.
+ */
+ int adf_on;
+
+ enum led_ids led_id;
+ enum led_colors color;
+ enum led_bits state;
+
+ /* General attributes of RGB LEDs */
+ int wave_pattern;
+ int rgb_current;
+};
+
+
+/*--------------------------------------------------------------*/
+/* BD2802GU helper functions */
+/*--------------------------------------------------------------*/
+
+static inline int bd2802_is_rgb_off(struct bd2802_led *led, enum led_ids id,
+ enum led_colors color)
+{
+ switch (color) {
+ case RED:
+ return !led->led[id].r;
+ case GREEN:
+ return !led->led[id].g;
+ case BLUE:
+ return !led->led[id].b;
+ default:
+ dev_err(&led->client->dev, "%s: Invalid color\n", __func__);
+ return -EINVAL;
+ }
+}
+
+static inline int bd2802_is_led_off(struct bd2802_led *led, enum led_ids id)
+{
+ if (led->led[id].r || led->led[id].g || led->led[id].b)
+ return 0;
+
+ return 1;
+}
+
+static inline int bd2802_is_all_off(struct bd2802_led *led)
+{
+ int i;
+
+ for (i = 0; i < LED_NUM; i++)
+ if (!bd2802_is_led_off(led, i))
+ return 0;
+
+ return 1;
+}
+
+static inline u8 bd2802_get_base_offset(enum led_ids id, enum led_colors color)
+{
+ return id * BD2802_LED_OFFSET + color * BD2802_COLOR_OFFSET;
+}
+
+static inline u8 bd2802_get_reg_addr(enum led_ids id, enum led_colors color,
+ u8 reg_offset)
+{
+ return reg_offset + bd2802_get_base_offset(id, color);
+}
+
+
+/*--------------------------------------------------------------*/
+/* BD2802GU core functions */
+/*--------------------------------------------------------------*/
+
+static int bd2802_write_byte(struct i2c_client *client, u8 reg, u8 val)
+{
+ int ret = i2c_smbus_write_byte_data(client, reg, val);
+ if (ret >= 0)
+ return 0;
+
+ dev_err(&client->dev, "%s: reg 0x%x, val 0x%x, err %d\n",
+ __func__, reg, val, ret);
+
+ return ret;
+}
+
+static void bd2802_update_state(struct bd2802_led *led, enum led_ids id,
+ enum led_colors color, enum led_bits led_bit)
+{
+ int i;
+ u8 value;
+
+ for (i = 0; i < LED_NUM; i++) {
+ if (i == id) {
+ switch (color) {
+ case RED:
+ led->led[i].r = led_bit;
+ break;
+ case GREEN:
+ led->led[i].g = led_bit;
+ break;
+ case BLUE:
+ led->led[i].b = led_bit;
+ break;
+ default:
+ dev_err(&led->client->dev,
+ "%s: Invalid color\n", __func__);
+ return;
+ }
+ }
+ }
+
+ if (led_bit == BD2802_BLINK || led_bit == BD2802_ON)
+ return;
+
+ if (!bd2802_is_led_off(led, id))
+ return;
+
+ if (bd2802_is_all_off(led) && !led->adf_on) {
+ gpio_set_value(led->pdata->reset_gpio, 0);
+ return;
+ }
+
+ /*
+ * In this case, other led is turned on, and current led is turned
+ * off. So set RGB LED Control register to stop the current RGB LED
+ */
+ value = (id == LED1) ? LED_CTL(1, 0) : LED_CTL(0, 1);
+ bd2802_write_byte(led->client, BD2802_REG_CONTROL, value);
+}
+
+static void bd2802_configure(struct bd2802_led *led)
+{
+ struct bd2802_led_platform_data *pdata = led->pdata;
+ u8 reg;
+
+ reg = bd2802_get_reg_addr(LED1, RED, BD2802_REG_HOURSETUP);
+ bd2802_write_byte(led->client, reg, pdata->rgb_time);
+
+ reg = bd2802_get_reg_addr(LED2, RED, BD2802_REG_HOURSETUP);
+ bd2802_write_byte(led->client, reg, pdata->rgb_time);
+}
+
+static void bd2802_reset_cancel(struct bd2802_led *led)
+{
+ gpio_set_value(led->pdata->reset_gpio, 1);
+ udelay(100);
+ bd2802_configure(led);
+}
+
+static void bd2802_enable(struct bd2802_led *led, enum led_ids id)
+{
+ enum led_ids other_led = (id == LED1) ? LED2 : LED1;
+ u8 value, other_led_on;
+
+ other_led_on = !bd2802_is_led_off(led, other_led);
+ if (id == LED1)
+ value = LED_CTL(other_led_on, 1);
+ else
+ value = LED_CTL(1 , other_led_on);
+
+ bd2802_write_byte(led->client, BD2802_REG_CONTROL, value);
+}
+
+static void bd2802_set_on(struct bd2802_led *led, enum led_ids id,
+ enum led_colors color)
+{
+ u8 reg;
+
+ if (bd2802_is_all_off(led) && !led->adf_on)
+ bd2802_reset_cancel(led);
+
+ reg = bd2802_get_reg_addr(id, color, BD2802_REG_CURRENT1SETUP);
+ bd2802_write_byte(led->client, reg, led->rgb_current);
+ reg = bd2802_get_reg_addr(id, color, BD2802_REG_CURRENT2SETUP);
+ bd2802_write_byte(led->client, reg, BD2802_CURRENT_000);
+ reg = bd2802_get_reg_addr(id, color, BD2802_REG_WAVEPATTERN);
+ bd2802_write_byte(led->client, reg, BD2802_PATTERN_FULL);
+
+ bd2802_enable(led, id);
+ bd2802_update_state(led, id, color, BD2802_ON);
+}
+
+static void bd2802_set_blink(struct bd2802_led *led, enum led_ids id,
+ enum led_colors color)
+{
+ u8 reg;
+
+ if (bd2802_is_all_off(led) && !led->adf_on)
+ bd2802_reset_cancel(led);
+
+ reg = bd2802_get_reg_addr(id, color, BD2802_REG_CURRENT1SETUP);
+ bd2802_write_byte(led->client, reg, BD2802_CURRENT_000);
+ reg = bd2802_get_reg_addr(id, color, BD2802_REG_CURRENT2SETUP);
+ bd2802_write_byte(led->client, reg, led->rgb_current);
+ reg = bd2802_get_reg_addr(id, color, BD2802_REG_WAVEPATTERN);
+ bd2802_write_byte(led->client, reg, led->wave_pattern);
+
+ bd2802_enable(led, id);
+ bd2802_update_state(led, id, color, BD2802_BLINK);
+}
+
+static void bd2802_turn_on(struct bd2802_led *led, enum led_ids id,
+ enum led_colors color, enum led_bits led_bit)
+{
+ if (led_bit == BD2802_OFF) {
+ dev_err(&led->client->dev,
+ "Only 'blink' and 'on' are allowed\n");
+ return;
+ }
+
+ if (led_bit == BD2802_BLINK)
+ bd2802_set_blink(led, id, color);
+ else
+ bd2802_set_on(led, id, color);
+}
+
+static void bd2802_turn_off(struct bd2802_led *led, enum led_ids id,
+ enum led_colors color)
+{
+ u8 reg;
+
+ if (bd2802_is_rgb_off(led, id, color))
+ return;
+
+ reg = bd2802_get_reg_addr(id, color, BD2802_REG_CURRENT1SETUP);
+ bd2802_write_byte(led->client, reg, BD2802_CURRENT_000);
+ reg = bd2802_get_reg_addr(id, color, BD2802_REG_CURRENT2SETUP);
+ bd2802_write_byte(led->client, reg, BD2802_CURRENT_000);
+
+ bd2802_update_state(led, id, color, BD2802_OFF);
+}
+
+#define BD2802_SET_REGISTER(reg_addr, reg_name) \
+static ssize_t bd2802_store_reg##reg_addr(struct device *dev, \
+ struct device_attribute *attr, const char *buf, size_t count) \
+{ \
+ struct bd2802_led *led = i2c_get_clientdata(to_i2c_client(dev));\
+ unsigned long val; \
+ int ret; \
+ if (!count) \
+ return -EINVAL; \
+ ret = kstrtoul(buf, 16, &val); \
+ if (ret) \
+ return ret; \
+ down_write(&led->rwsem); \
+ bd2802_write_byte(led->client, reg_addr, (u8) val); \
+ up_write(&led->rwsem); \
+ return count; \
+} \
+static struct device_attribute bd2802_reg##reg_addr##_attr = { \
+ .attr = {.name = reg_name, .mode = 0644}, \
+ .store = bd2802_store_reg##reg_addr, \
+};
+
+BD2802_SET_REGISTER(0x00, "0x00");
+BD2802_SET_REGISTER(0x01, "0x01");
+BD2802_SET_REGISTER(0x02, "0x02");
+BD2802_SET_REGISTER(0x03, "0x03");
+BD2802_SET_REGISTER(0x04, "0x04");
+BD2802_SET_REGISTER(0x05, "0x05");
+BD2802_SET_REGISTER(0x06, "0x06");
+BD2802_SET_REGISTER(0x07, "0x07");
+BD2802_SET_REGISTER(0x08, "0x08");
+BD2802_SET_REGISTER(0x09, "0x09");
+BD2802_SET_REGISTER(0x0a, "0x0a");
+BD2802_SET_REGISTER(0x0b, "0x0b");
+BD2802_SET_REGISTER(0x0c, "0x0c");
+BD2802_SET_REGISTER(0x0d, "0x0d");
+BD2802_SET_REGISTER(0x0e, "0x0e");
+BD2802_SET_REGISTER(0x0f, "0x0f");
+BD2802_SET_REGISTER(0x10, "0x10");
+BD2802_SET_REGISTER(0x11, "0x11");
+BD2802_SET_REGISTER(0x12, "0x12");
+BD2802_SET_REGISTER(0x13, "0x13");
+BD2802_SET_REGISTER(0x14, "0x14");
+BD2802_SET_REGISTER(0x15, "0x15");
+
+static struct device_attribute *bd2802_addr_attributes[] = {
+ &bd2802_reg0x00_attr,
+ &bd2802_reg0x01_attr,
+ &bd2802_reg0x02_attr,
+ &bd2802_reg0x03_attr,
+ &bd2802_reg0x04_attr,
+ &bd2802_reg0x05_attr,
+ &bd2802_reg0x06_attr,
+ &bd2802_reg0x07_attr,
+ &bd2802_reg0x08_attr,
+ &bd2802_reg0x09_attr,
+ &bd2802_reg0x0a_attr,
+ &bd2802_reg0x0b_attr,
+ &bd2802_reg0x0c_attr,
+ &bd2802_reg0x0d_attr,
+ &bd2802_reg0x0e_attr,
+ &bd2802_reg0x0f_attr,
+ &bd2802_reg0x10_attr,
+ &bd2802_reg0x11_attr,
+ &bd2802_reg0x12_attr,
+ &bd2802_reg0x13_attr,
+ &bd2802_reg0x14_attr,
+ &bd2802_reg0x15_attr,
+};
+
+static void bd2802_enable_adv_conf(struct bd2802_led *led)
+{
+ int i, ret;
+
+ for (i = 0; i < ARRAY_SIZE(bd2802_addr_attributes); i++) {
+ ret = device_create_file(&led->client->dev,
+ bd2802_addr_attributes[i]);
+ if (ret) {
+ dev_err(&led->client->dev, "failed: sysfs file %s\n",
+ bd2802_addr_attributes[i]->attr.name);
+ goto failed_remove_files;
+ }
+ }
+
+ if (bd2802_is_all_off(led))
+ bd2802_reset_cancel(led);
+
+ led->adf_on = 1;
+
+ return;
+
+failed_remove_files:
+ for (i--; i >= 0; i--)
+ device_remove_file(&led->client->dev,
+ bd2802_addr_attributes[i]);
+}
+
+static void bd2802_disable_adv_conf(struct bd2802_led *led)
+{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(bd2802_addr_attributes); i++)
+ device_remove_file(&led->client->dev,
+ bd2802_addr_attributes[i]);
+
+ if (bd2802_is_all_off(led))
+ gpio_set_value(led->pdata->reset_gpio, 0);
+
+ led->adf_on = 0;
+}
+
+static ssize_t bd2802_show_adv_conf(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct bd2802_led *led = i2c_get_clientdata(to_i2c_client(dev));
+ ssize_t ret;
+
+ down_read(&led->rwsem);
+ if (led->adf_on)
+ ret = sprintf(buf, "on\n");
+ else
+ ret = sprintf(buf, "off\n");
+ up_read(&led->rwsem);
+
+ return ret;
+}
+
+static ssize_t bd2802_store_adv_conf(struct device *dev,
+ struct device_attribute *attr, const char *buf, size_t count)
+{
+ struct bd2802_led *led = i2c_get_clientdata(to_i2c_client(dev));
+
+ if (!count)
+ return -EINVAL;
+
+ down_write(&led->rwsem);
+ if (!led->adf_on && !strncmp(buf, "on", 2))
+ bd2802_enable_adv_conf(led);
+ else if (led->adf_on && !strncmp(buf, "off", 3))
+ bd2802_disable_adv_conf(led);
+ up_write(&led->rwsem);
+
+ return count;
+}
+
+static struct device_attribute bd2802_adv_conf_attr = {
+ .attr = {
+ .name = "advanced_configuration",
+ .mode = 0644,
+ },
+ .show = bd2802_show_adv_conf,
+ .store = bd2802_store_adv_conf,
+};
+
+#define BD2802_CONTROL_ATTR(attr_name, name_str) \
+static ssize_t bd2802_show_##attr_name(struct device *dev, \
+ struct device_attribute *attr, char *buf) \
+{ \
+ struct bd2802_led *led = i2c_get_clientdata(to_i2c_client(dev));\
+ ssize_t ret; \
+ down_read(&led->rwsem); \
+ ret = sprintf(buf, "0x%02x\n", led->attr_name); \
+ up_read(&led->rwsem); \
+ return ret; \
+} \
+static ssize_t bd2802_store_##attr_name(struct device *dev, \
+ struct device_attribute *attr, const char *buf, size_t count) \
+{ \
+ struct bd2802_led *led = i2c_get_clientdata(to_i2c_client(dev));\
+ unsigned long val; \
+ int ret; \
+ if (!count) \
+ return -EINVAL; \
+ ret = kstrtoul(buf, 16, &val); \
+ if (ret) \
+ return ret; \
+ down_write(&led->rwsem); \
+ led->attr_name = val; \
+ up_write(&led->rwsem); \
+ return count; \
+} \
+static struct device_attribute bd2802_##attr_name##_attr = { \
+ .attr = { \
+ .name = name_str, \
+ .mode = 0644, \
+ }, \
+ .show = bd2802_show_##attr_name, \
+ .store = bd2802_store_##attr_name, \
+};
+
+BD2802_CONTROL_ATTR(wave_pattern, "wave_pattern");
+BD2802_CONTROL_ATTR(rgb_current, "rgb_current");
+
+static struct device_attribute *bd2802_attributes[] = {
+ &bd2802_adv_conf_attr,
+ &bd2802_wave_pattern_attr,
+ &bd2802_rgb_current_attr,
+};
+
+static void bd2802_led_work(struct work_struct *work)
+{
+ struct bd2802_led *led = container_of(work, struct bd2802_led, work);
+
+ if (led->state)
+ bd2802_turn_on(led, led->led_id, led->color, led->state);
+ else
+ bd2802_turn_off(led, led->led_id, led->color);
+}
+
+#define BD2802_CONTROL_RGBS(name, id, clr) \
+static void bd2802_set_##name##_brightness(struct led_classdev *led_cdev,\
+ enum led_brightness value) \
+{ \
+ struct bd2802_led *led = \
+ container_of(led_cdev, struct bd2802_led, cdev_##name); \
+ led->led_id = id; \
+ led->color = clr; \
+ if (value == LED_OFF) \
+ led->state = BD2802_OFF; \
+ else \
+ led->state = BD2802_ON; \
+ schedule_work(&led->work); \
+} \
+static int bd2802_set_##name##_blink(struct led_classdev *led_cdev, \
+ unsigned long *delay_on, unsigned long *delay_off) \
+{ \
+ struct bd2802_led *led = \
+ container_of(led_cdev, struct bd2802_led, cdev_##name); \
+ if (*delay_on == 0 || *delay_off == 0) \
+ return -EINVAL; \
+ led->led_id = id; \
+ led->color = clr; \
+ led->state = BD2802_BLINK; \
+ schedule_work(&led->work); \
+ return 0; \
+}
+
+BD2802_CONTROL_RGBS(led1r, LED1, RED);
+BD2802_CONTROL_RGBS(led1g, LED1, GREEN);
+BD2802_CONTROL_RGBS(led1b, LED1, BLUE);
+BD2802_CONTROL_RGBS(led2r, LED2, RED);
+BD2802_CONTROL_RGBS(led2g, LED2, GREEN);
+BD2802_CONTROL_RGBS(led2b, LED2, BLUE);
+
+static int bd2802_register_led_classdev(struct bd2802_led *led)
+{
+ int ret;
+
+ INIT_WORK(&led->work, bd2802_led_work);
+
+ led->cdev_led1r.name = "led1_R";
+ led->cdev_led1r.brightness = LED_OFF;
+ led->cdev_led1r.brightness_set = bd2802_set_led1r_brightness;
+ led->cdev_led1r.blink_set = bd2802_set_led1r_blink;
+
+ ret = led_classdev_register(&led->client->dev, &led->cdev_led1r);
+ if (ret < 0) {
+ dev_err(&led->client->dev, "couldn't register LED %s\n",
+ led->cdev_led1r.name);
+ goto failed_unregister_led1_R;
+ }
+
+ led->cdev_led1g.name = "led1_G";
+ led->cdev_led1g.brightness = LED_OFF;
+ led->cdev_led1g.brightness_set = bd2802_set_led1g_brightness;
+ led->cdev_led1g.blink_set = bd2802_set_led1g_blink;
+
+ ret = led_classdev_register(&led->client->dev, &led->cdev_led1g);
+ if (ret < 0) {
+ dev_err(&led->client->dev, "couldn't register LED %s\n",
+ led->cdev_led1g.name);
+ goto failed_unregister_led1_G;
+ }
+
+ led->cdev_led1b.name = "led1_B";
+ led->cdev_led1b.brightness = LED_OFF;
+ led->cdev_led1b.brightness_set = bd2802_set_led1b_brightness;
+ led->cdev_led1b.blink_set = bd2802_set_led1b_blink;
+
+ ret = led_classdev_register(&led->client->dev, &led->cdev_led1b);
+ if (ret < 0) {
+ dev_err(&led->client->dev, "couldn't register LED %s\n",
+ led->cdev_led1b.name);
+ goto failed_unregister_led1_B;
+ }
+
+ led->cdev_led2r.name = "led2_R";
+ led->cdev_led2r.brightness = LED_OFF;
+ led->cdev_led2r.brightness_set = bd2802_set_led2r_brightness;
+ led->cdev_led2r.blink_set = bd2802_set_led2r_blink;
+
+ ret = led_classdev_register(&led->client->dev, &led->cdev_led2r);
+ if (ret < 0) {
+ dev_err(&led->client->dev, "couldn't register LED %s\n",
+ led->cdev_led2r.name);
+ goto failed_unregister_led2_R;
+ }
+
+ led->cdev_led2g.name = "led2_G";
+ led->cdev_led2g.brightness = LED_OFF;
+ led->cdev_led2g.brightness_set = bd2802_set_led2g_brightness;
+ led->cdev_led2g.blink_set = bd2802_set_led2g_blink;
+
+ ret = led_classdev_register(&led->client->dev, &led->cdev_led2g);
+ if (ret < 0) {
+ dev_err(&led->client->dev, "couldn't register LED %s\n",
+ led->cdev_led2g.name);
+ goto failed_unregister_led2_G;
+ }
+
+ led->cdev_led2b.name = "led2_B";
+ led->cdev_led2b.brightness = LED_OFF;
+ led->cdev_led2b.brightness_set = bd2802_set_led2b_brightness;
+ led->cdev_led2b.blink_set = bd2802_set_led2b_blink;
+ led->cdev_led2b.flags |= LED_CORE_SUSPENDRESUME;
+
+ ret = led_classdev_register(&led->client->dev, &led->cdev_led2b);
+ if (ret < 0) {
+ dev_err(&led->client->dev, "couldn't register LED %s\n",
+ led->cdev_led2b.name);
+ goto failed_unregister_led2_B;
+ }
+
+ return 0;
+
+failed_unregister_led2_B:
+ led_classdev_unregister(&led->cdev_led2g);
+failed_unregister_led2_G:
+ led_classdev_unregister(&led->cdev_led2r);
+failed_unregister_led2_R:
+ led_classdev_unregister(&led->cdev_led1b);
+failed_unregister_led1_B:
+ led_classdev_unregister(&led->cdev_led1g);
+failed_unregister_led1_G:
+ led_classdev_unregister(&led->cdev_led1r);
+failed_unregister_led1_R:
+
+ return ret;
+}
+
+static void bd2802_unregister_led_classdev(struct bd2802_led *led)
+{
+ cancel_work_sync(&led->work);
+ led_classdev_unregister(&led->cdev_led2b);
+ led_classdev_unregister(&led->cdev_led2g);
+ led_classdev_unregister(&led->cdev_led2r);
+ led_classdev_unregister(&led->cdev_led1b);
+ led_classdev_unregister(&led->cdev_led1g);
+ led_classdev_unregister(&led->cdev_led1r);
+}
+
+static int bd2802_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct bd2802_led *led;
+ struct bd2802_led_platform_data *pdata;
+ int ret, i;
+
+ led = devm_kzalloc(&client->dev, sizeof(struct bd2802_led), GFP_KERNEL);
+ if (!led)
+ return -ENOMEM;
+
+ led->client = client;
+ pdata = led->pdata = dev_get_platdata(&client->dev);
+ i2c_set_clientdata(client, led);
+
+ /* Configure RESET GPIO (L: RESET, H: RESET cancel) */
+ gpio_request_one(pdata->reset_gpio, GPIOF_OUT_INIT_HIGH, "RGB_RESETB");
+
+ /* Tacss = min 0.1ms */
+ udelay(100);
+
+ /* Detect BD2802GU */
+ ret = bd2802_write_byte(client, BD2802_REG_CLKSETUP, 0x00);
+ if (ret < 0) {
+ dev_err(&client->dev, "failed to detect device\n");
+ return ret;
+ } else
+ dev_info(&client->dev, "return 0x%02x\n", ret);
+
+ /* To save the power, reset BD2802 after detecting */
+ gpio_set_value(led->pdata->reset_gpio, 0);
+
+ /* Default attributes */
+ led->wave_pattern = BD2802_PATTERN_HALF;
+ led->rgb_current = BD2802_CURRENT_032;
+
+ init_rwsem(&led->rwsem);
+
+ for (i = 0; i < ARRAY_SIZE(bd2802_attributes); i++) {
+ ret = device_create_file(&led->client->dev,
+ bd2802_attributes[i]);
+ if (ret) {
+ dev_err(&led->client->dev, "failed: sysfs file %s\n",
+ bd2802_attributes[i]->attr.name);
+ goto failed_unregister_dev_file;
+ }
+ }
+
+ ret = bd2802_register_led_classdev(led);
+ if (ret < 0)
+ goto failed_unregister_dev_file;
+
+ return 0;
+
+failed_unregister_dev_file:
+ for (i--; i >= 0; i--)
+ device_remove_file(&led->client->dev, bd2802_attributes[i]);
+ return ret;
+}
+
+static int bd2802_remove(struct i2c_client *client)
+{
+ struct bd2802_led *led = i2c_get_clientdata(client);
+ int i;
+
+ gpio_set_value(led->pdata->reset_gpio, 0);
+ bd2802_unregister_led_classdev(led);
+ if (led->adf_on)
+ bd2802_disable_adv_conf(led);
+ for (i = 0; i < ARRAY_SIZE(bd2802_attributes); i++)
+ device_remove_file(&led->client->dev, bd2802_attributes[i]);
+
+ return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static void bd2802_restore_state(struct bd2802_led *led)
+{
+ int i;
+
+ for (i = 0; i < LED_NUM; i++) {
+ if (led->led[i].r)
+ bd2802_turn_on(led, i, RED, led->led[i].r);
+ if (led->led[i].g)
+ bd2802_turn_on(led, i, GREEN, led->led[i].g);
+ if (led->led[i].b)
+ bd2802_turn_on(led, i, BLUE, led->led[i].b);
+ }
+}
+
+static int bd2802_suspend(struct device *dev)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct bd2802_led *led = i2c_get_clientdata(client);
+
+ gpio_set_value(led->pdata->reset_gpio, 0);
+
+ return 0;
+}
+
+static int bd2802_resume(struct device *dev)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct bd2802_led *led = i2c_get_clientdata(client);
+
+ if (!bd2802_is_all_off(led) || led->adf_on) {
+ bd2802_reset_cancel(led);
+ bd2802_restore_state(led);
+ }
+
+ return 0;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(bd2802_pm, bd2802_suspend, bd2802_resume);
+
+static const struct i2c_device_id bd2802_id[] = {
+ { "BD2802", 0 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, bd2802_id);
+
+static struct i2c_driver bd2802_i2c_driver = {
+ .driver = {
+ .name = "BD2802",
+ .pm = &bd2802_pm,
+ },
+ .probe = bd2802_probe,
+ .remove = bd2802_remove,
+ .id_table = bd2802_id,
+};
+
+module_i2c_driver(bd2802_i2c_driver);
+
+MODULE_AUTHOR("Kim Kyuwon <q1.kim@samsung.com>");
+MODULE_DESCRIPTION("BD2802 LED driver");
+MODULE_LICENSE("GPL v2");
diff --git a/kernel/drivers/leds/leds-blinkm.c b/kernel/drivers/leds/leds-blinkm.c
new file mode 100644
index 000000000..d0452b099
--- /dev/null
+++ b/kernel/drivers/leds/leds-blinkm.c
@@ -0,0 +1,811 @@
+/*
+ * leds-blinkm.c
+ * (c) Jan-Simon Möller (dl9pf@gmx.de)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/jiffies.h>
+#include <linux/i2c.h>
+#include <linux/err.h>
+#include <linux/mutex.h>
+#include <linux/sysfs.h>
+#include <linux/printk.h>
+#include <linux/pm_runtime.h>
+#include <linux/leds.h>
+#include <linux/delay.h>
+
+/* Addresses to scan - BlinkM is on 0x09 by default*/
+static const unsigned short normal_i2c[] = { 0x09, I2C_CLIENT_END };
+
+static int blinkm_transfer_hw(struct i2c_client *client, int cmd);
+static int blinkm_test_run(struct i2c_client *client);
+
+struct blinkm_led {
+ struct i2c_client *i2c_client;
+ struct led_classdev led_cdev;
+ int id;
+ atomic_t active;
+};
+
+struct blinkm_work {
+ struct blinkm_led *blinkm_led;
+ struct work_struct work;
+};
+
+#define cdev_to_blmled(c) container_of(c, struct blinkm_led, led_cdev)
+#define work_to_blmwork(c) container_of(c, struct blinkm_work, work)
+
+struct blinkm_data {
+ struct i2c_client *i2c_client;
+ struct mutex update_lock;
+ /* used for led class interface */
+ struct blinkm_led blinkm_leds[3];
+ /* used for "blinkm" sysfs interface */
+ u8 red; /* color red */
+ u8 green; /* color green */
+ u8 blue; /* color blue */
+ /* next values to use for transfer */
+ u8 next_red; /* color red */
+ u8 next_green; /* color green */
+ u8 next_blue; /* color blue */
+ /* internal use */
+ u8 args[7]; /* set of args for transmission */
+ u8 i2c_addr; /* i2c addr */
+ u8 fw_ver; /* firmware version */
+ /* used, but not from userspace */
+ u8 hue; /* HSB hue */
+ u8 saturation; /* HSB saturation */
+ u8 brightness; /* HSB brightness */
+ u8 next_hue; /* HSB hue */
+ u8 next_saturation; /* HSB saturation */
+ u8 next_brightness; /* HSB brightness */
+ /* currently unused / todo */
+ u8 fade_speed; /* fade speed 1 - 255 */
+ s8 time_adjust; /* time adjust -128 - 127 */
+ u8 fade:1; /* fade on = 1, off = 0 */
+ u8 rand:1; /* rand fade mode on = 1 */
+ u8 script_id; /* script ID */
+ u8 script_repeats; /* repeats of script */
+ u8 script_startline; /* line to start */
+};
+
+/* Colors */
+#define RED 0
+#define GREEN 1
+#define BLUE 2
+
+/* mapping command names to cmd chars - see datasheet */
+#define BLM_GO_RGB 0
+#define BLM_FADE_RGB 1
+#define BLM_FADE_HSB 2
+#define BLM_FADE_RAND_RGB 3
+#define BLM_FADE_RAND_HSB 4
+#define BLM_PLAY_SCRIPT 5
+#define BLM_STOP_SCRIPT 6
+#define BLM_SET_FADE_SPEED 7
+#define BLM_SET_TIME_ADJ 8
+#define BLM_GET_CUR_RGB 9
+#define BLM_WRITE_SCRIPT_LINE 10
+#define BLM_READ_SCRIPT_LINE 11
+#define BLM_SET_SCRIPT_LR 12 /* Length & Repeats */
+#define BLM_SET_ADDR 13
+#define BLM_GET_ADDR 14
+#define BLM_GET_FW_VER 15
+#define BLM_SET_STARTUP_PARAM 16
+
+/* BlinkM Commands
+ * as extracted out of the datasheet:
+ *
+ * cmdchar = command (ascii)
+ * cmdbyte = command in hex
+ * nr_args = number of arguments (to send)
+ * nr_ret = number of return values (to read)
+ * dir = direction (0 = read, 1 = write, 2 = both)
+ *
+ */
+static const struct {
+ char cmdchar;
+ u8 cmdbyte;
+ u8 nr_args;
+ u8 nr_ret;
+ u8 dir:2;
+} blinkm_cmds[17] = {
+ /* cmdchar, cmdbyte, nr_args, nr_ret, dir */
+ { 'n', 0x6e, 3, 0, 1},
+ { 'c', 0x63, 3, 0, 1},
+ { 'h', 0x68, 3, 0, 1},
+ { 'C', 0x43, 3, 0, 1},
+ { 'H', 0x48, 3, 0, 1},
+ { 'p', 0x70, 3, 0, 1},
+ { 'o', 0x6f, 0, 0, 1},
+ { 'f', 0x66, 1, 0, 1},
+ { 't', 0x74, 1, 0, 1},
+ { 'g', 0x67, 0, 3, 0},
+ { 'W', 0x57, 7, 0, 1},
+ { 'R', 0x52, 2, 5, 2},
+ { 'L', 0x4c, 3, 0, 1},
+ { 'A', 0x41, 4, 0, 1},
+ { 'a', 0x61, 0, 1, 0},
+ { 'Z', 0x5a, 0, 1, 0},
+ { 'B', 0x42, 5, 0, 1},
+};
+
+static ssize_t show_color_common(struct device *dev, char *buf, int color)
+{
+ struct i2c_client *client;
+ struct blinkm_data *data;
+ int ret;
+
+ client = to_i2c_client(dev);
+ data = i2c_get_clientdata(client);
+
+ ret = blinkm_transfer_hw(client, BLM_GET_CUR_RGB);
+ if (ret < 0)
+ return ret;
+ switch (color) {
+ case RED:
+ return scnprintf(buf, PAGE_SIZE, "%02X\n", data->red);
+ case GREEN:
+ return scnprintf(buf, PAGE_SIZE, "%02X\n", data->green);
+ case BLUE:
+ return scnprintf(buf, PAGE_SIZE, "%02X\n", data->blue);
+ default:
+ return -EINVAL;
+ }
+ return -EINVAL;
+}
+
+static int store_color_common(struct device *dev, const char *buf, int color)
+{
+ struct i2c_client *client;
+ struct blinkm_data *data;
+ int ret;
+ u8 value;
+
+ client = to_i2c_client(dev);
+ data = i2c_get_clientdata(client);
+
+ ret = kstrtou8(buf, 10, &value);
+ if (ret < 0) {
+ dev_err(dev, "BlinkM: value too large!\n");
+ return ret;
+ }
+
+ switch (color) {
+ case RED:
+ data->next_red = value;
+ break;
+ case GREEN:
+ data->next_green = value;
+ break;
+ case BLUE:
+ data->next_blue = value;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ dev_dbg(dev, "next_red = %d, next_green = %d, next_blue = %d\n",
+ data->next_red, data->next_green, data->next_blue);
+
+ /* if mode ... */
+ ret = blinkm_transfer_hw(client, BLM_GO_RGB);
+ if (ret < 0) {
+ dev_err(dev, "BlinkM: can't set RGB\n");
+ return ret;
+ }
+ return 0;
+}
+
+static ssize_t show_red(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ return show_color_common(dev, buf, RED);
+}
+
+static ssize_t store_red(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ int ret;
+
+ ret = store_color_common(dev, buf, RED);
+ if (ret < 0)
+ return ret;
+ return count;
+}
+
+static DEVICE_ATTR(red, S_IRUGO | S_IWUSR, show_red, store_red);
+
+static ssize_t show_green(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ return show_color_common(dev, buf, GREEN);
+}
+
+static ssize_t store_green(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+
+ int ret;
+
+ ret = store_color_common(dev, buf, GREEN);
+ if (ret < 0)
+ return ret;
+ return count;
+}
+
+static DEVICE_ATTR(green, S_IRUGO | S_IWUSR, show_green, store_green);
+
+static ssize_t show_blue(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ return show_color_common(dev, buf, BLUE);
+}
+
+static ssize_t store_blue(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ int ret;
+
+ ret = store_color_common(dev, buf, BLUE);
+ if (ret < 0)
+ return ret;
+ return count;
+}
+
+static DEVICE_ATTR(blue, S_IRUGO | S_IWUSR, show_blue, store_blue);
+
+static ssize_t show_test(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ return scnprintf(buf, PAGE_SIZE,
+ "#Write into test to start test sequence!#\n");
+}
+
+static ssize_t store_test(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+
+ struct i2c_client *client;
+ int ret;
+ client = to_i2c_client(dev);
+
+ /*test */
+ ret = blinkm_test_run(client);
+ if (ret < 0)
+ return ret;
+
+ return count;
+}
+
+static DEVICE_ATTR(test, S_IRUGO | S_IWUSR, show_test, store_test);
+
+/* TODO: HSB, fade, timeadj, script ... */
+
+static struct attribute *blinkm_attrs[] = {
+ &dev_attr_red.attr,
+ &dev_attr_green.attr,
+ &dev_attr_blue.attr,
+ &dev_attr_test.attr,
+ NULL,
+};
+
+static struct attribute_group blinkm_group = {
+ .name = "blinkm",
+ .attrs = blinkm_attrs,
+};
+
+static int blinkm_write(struct i2c_client *client, int cmd, u8 *arg)
+{
+ int result;
+ int i;
+ int arglen = blinkm_cmds[cmd].nr_args;
+ /* write out cmd to blinkm - always / default step */
+ result = i2c_smbus_write_byte(client, blinkm_cmds[cmd].cmdbyte);
+ if (result < 0)
+ return result;
+ /* no args to write out */
+ if (arglen == 0)
+ return 0;
+
+ for (i = 0; i < arglen; i++) {
+ /* repeat for arglen */
+ result = i2c_smbus_write_byte(client, arg[i]);
+ if (result < 0)
+ return result;
+ }
+ return 0;
+}
+
+static int blinkm_read(struct i2c_client *client, int cmd, u8 *arg)
+{
+ int result;
+ int i;
+ int retlen = blinkm_cmds[cmd].nr_ret;
+ for (i = 0; i < retlen; i++) {
+ /* repeat for retlen */
+ result = i2c_smbus_read_byte(client);
+ if (result < 0)
+ return result;
+ arg[i] = result;
+ }
+
+ return 0;
+}
+
+static int blinkm_transfer_hw(struct i2c_client *client, int cmd)
+{
+ /* the protocol is simple but non-standard:
+ * e.g. cmd 'g' (= 0x67) for "get device address"
+ * - which defaults to 0x09 - would be the sequence:
+ * a) write 0x67 to the device (byte write)
+ * b) read the value (0x09) back right after (byte read)
+ *
+ * Watch out for "unfinished" sequences (i.e. not enough reads
+ * or writes after a command. It will make the blinkM misbehave.
+ * Sequence is key here.
+ */
+
+ /* args / return are in private data struct */
+ struct blinkm_data *data = i2c_get_clientdata(client);
+
+ /* We start hardware transfers which are not to be
+ * mixed with other commands. Aquire a lock now. */
+ if (mutex_lock_interruptible(&data->update_lock) < 0)
+ return -EAGAIN;
+
+ /* switch cmd - usually write before reads */
+ switch (cmd) {
+ case BLM_FADE_RAND_RGB:
+ case BLM_GO_RGB:
+ case BLM_FADE_RGB:
+ data->args[0] = data->next_red;
+ data->args[1] = data->next_green;
+ data->args[2] = data->next_blue;
+ blinkm_write(client, cmd, data->args);
+ data->red = data->args[0];
+ data->green = data->args[1];
+ data->blue = data->args[2];
+ break;
+ case BLM_FADE_HSB:
+ case BLM_FADE_RAND_HSB:
+ data->args[0] = data->next_hue;
+ data->args[1] = data->next_saturation;
+ data->args[2] = data->next_brightness;
+ blinkm_write(client, cmd, data->args);
+ data->hue = data->next_hue;
+ data->saturation = data->next_saturation;
+ data->brightness = data->next_brightness;
+ break;
+ case BLM_PLAY_SCRIPT:
+ data->args[0] = data->script_id;
+ data->args[1] = data->script_repeats;
+ data->args[2] = data->script_startline;
+ blinkm_write(client, cmd, data->args);
+ break;
+ case BLM_STOP_SCRIPT:
+ blinkm_write(client, cmd, NULL);
+ break;
+ case BLM_GET_CUR_RGB:
+ data->args[0] = data->red;
+ data->args[1] = data->green;
+ data->args[2] = data->blue;
+ blinkm_write(client, cmd, NULL);
+ blinkm_read(client, cmd, data->args);
+ data->red = data->args[0];
+ data->green = data->args[1];
+ data->blue = data->args[2];
+ break;
+ case BLM_GET_ADDR:
+ data->args[0] = data->i2c_addr;
+ blinkm_write(client, cmd, NULL);
+ blinkm_read(client, cmd, data->args);
+ data->i2c_addr = data->args[0];
+ break;
+ case BLM_SET_TIME_ADJ:
+ case BLM_SET_FADE_SPEED:
+ case BLM_READ_SCRIPT_LINE:
+ case BLM_WRITE_SCRIPT_LINE:
+ case BLM_SET_SCRIPT_LR:
+ case BLM_SET_ADDR:
+ case BLM_GET_FW_VER:
+ case BLM_SET_STARTUP_PARAM:
+ dev_err(&client->dev,
+ "BlinkM: cmd %d not implemented yet.\n", cmd);
+ break;
+ default:
+ dev_err(&client->dev, "BlinkM: unknown command %d\n", cmd);
+ mutex_unlock(&data->update_lock);
+ return -EINVAL;
+ } /* end switch(cmd) */
+
+ /* transfers done, unlock */
+ mutex_unlock(&data->update_lock);
+ return 0;
+}
+
+static void led_work(struct work_struct *work)
+{
+ int ret;
+ struct blinkm_led *led;
+ struct blinkm_data *data;
+ struct blinkm_work *blm_work = work_to_blmwork(work);
+
+ led = blm_work->blinkm_led;
+ data = i2c_get_clientdata(led->i2c_client);
+ ret = blinkm_transfer_hw(led->i2c_client, BLM_GO_RGB);
+ atomic_dec(&led->active);
+ dev_dbg(&led->i2c_client->dev,
+ "# DONE # next_red = %d, next_green = %d,"
+ " next_blue = %d, active = %d\n",
+ data->next_red, data->next_green,
+ data->next_blue, atomic_read(&led->active));
+ kfree(blm_work);
+}
+
+static int blinkm_led_common_set(struct led_classdev *led_cdev,
+ enum led_brightness value, int color)
+{
+ /* led_brightness is 0, 127 or 255 - we just use it here as-is */
+ struct blinkm_led *led = cdev_to_blmled(led_cdev);
+ struct blinkm_data *data = i2c_get_clientdata(led->i2c_client);
+ struct blinkm_work *bl_work;
+
+ switch (color) {
+ case RED:
+ /* bail out if there's no change */
+ if (data->next_red == (u8) value)
+ return 0;
+ /* we assume a quite fast sequence here ([off]->on->off)
+ * think of network led trigger - we cannot blink that fast, so
+ * in case we already have a off->on->off transition queued up,
+ * we refuse to queue up more.
+ * Revisit: fast-changing brightness. */
+ if (atomic_read(&led->active) > 1)
+ return 0;
+ data->next_red = (u8) value;
+ break;
+ case GREEN:
+ /* bail out if there's no change */
+ if (data->next_green == (u8) value)
+ return 0;
+ /* we assume a quite fast sequence here ([off]->on->off)
+ * Revisit: fast-changing brightness. */
+ if (atomic_read(&led->active) > 1)
+ return 0;
+ data->next_green = (u8) value;
+ break;
+ case BLUE:
+ /* bail out if there's no change */
+ if (data->next_blue == (u8) value)
+ return 0;
+ /* we assume a quite fast sequence here ([off]->on->off)
+ * Revisit: fast-changing brightness. */
+ if (atomic_read(&led->active) > 1)
+ return 0;
+ data->next_blue = (u8) value;
+ break;
+
+ default:
+ dev_err(&led->i2c_client->dev, "BlinkM: unknown color.\n");
+ return -EINVAL;
+ }
+
+ bl_work = kzalloc(sizeof(*bl_work), GFP_ATOMIC);
+ if (!bl_work)
+ return -ENOMEM;
+
+ atomic_inc(&led->active);
+ dev_dbg(&led->i2c_client->dev,
+ "#TO_SCHED# next_red = %d, next_green = %d,"
+ " next_blue = %d, active = %d\n",
+ data->next_red, data->next_green,
+ data->next_blue, atomic_read(&led->active));
+
+ /* a fresh work _item_ for each change */
+ bl_work->blinkm_led = led;
+ INIT_WORK(&bl_work->work, led_work);
+ /* queue work in own queue for easy sync on exit*/
+ schedule_work(&bl_work->work);
+
+ return 0;
+}
+
+static void blinkm_led_red_set(struct led_classdev *led_cdev,
+ enum led_brightness value)
+{
+ blinkm_led_common_set(led_cdev, value, RED);
+}
+
+static void blinkm_led_green_set(struct led_classdev *led_cdev,
+ enum led_brightness value)
+{
+ blinkm_led_common_set(led_cdev, value, GREEN);
+}
+
+static void blinkm_led_blue_set(struct led_classdev *led_cdev,
+ enum led_brightness value)
+{
+ blinkm_led_common_set(led_cdev, value, BLUE);
+}
+
+static void blinkm_init_hw(struct i2c_client *client)
+{
+ int ret;
+ ret = blinkm_transfer_hw(client, BLM_STOP_SCRIPT);
+ ret = blinkm_transfer_hw(client, BLM_GO_RGB);
+}
+
+static int blinkm_test_run(struct i2c_client *client)
+{
+ int ret;
+ struct blinkm_data *data = i2c_get_clientdata(client);
+
+ data->next_red = 0x01;
+ data->next_green = 0x05;
+ data->next_blue = 0x10;
+ ret = blinkm_transfer_hw(client, BLM_GO_RGB);
+ if (ret < 0)
+ return ret;
+ msleep(2000);
+
+ data->next_red = 0x25;
+ data->next_green = 0x10;
+ data->next_blue = 0x31;
+ ret = blinkm_transfer_hw(client, BLM_FADE_RGB);
+ if (ret < 0)
+ return ret;
+ msleep(2000);
+
+ data->next_hue = 0x50;
+ data->next_saturation = 0x10;
+ data->next_brightness = 0x20;
+ ret = blinkm_transfer_hw(client, BLM_FADE_HSB);
+ if (ret < 0)
+ return ret;
+ msleep(2000);
+
+ return 0;
+}
+
+/* Return 0 if detection is successful, -ENODEV otherwise */
+static int blinkm_detect(struct i2c_client *client, struct i2c_board_info *info)
+{
+ struct i2c_adapter *adapter = client->adapter;
+ int ret;
+ int count = 99;
+ u8 tmpargs[7];
+
+ if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA
+ | I2C_FUNC_SMBUS_WORD_DATA
+ | I2C_FUNC_SMBUS_WRITE_BYTE))
+ return -ENODEV;
+
+ /* Now, we do the remaining detection. Simple for now. */
+ /* We might need more guards to protect other i2c slaves */
+
+ /* make sure the blinkM is balanced (read/writes) */
+ while (count > 0) {
+ ret = blinkm_write(client, BLM_GET_ADDR, NULL);
+ usleep_range(5000, 10000);
+ ret = blinkm_read(client, BLM_GET_ADDR, tmpargs);
+ usleep_range(5000, 10000);
+ if (tmpargs[0] == 0x09)
+ count = 0;
+ count--;
+ }
+
+ /* Step 1: Read BlinkM address back - cmd_char 'a' */
+ ret = blinkm_write(client, BLM_GET_ADDR, NULL);
+ if (ret < 0)
+ return ret;
+ usleep_range(20000, 30000); /* allow a small delay */
+ ret = blinkm_read(client, BLM_GET_ADDR, tmpargs);
+ if (ret < 0)
+ return ret;
+
+ if (tmpargs[0] != 0x09) {
+ dev_err(&client->dev, "enodev DEV ADDR = 0x%02X\n", tmpargs[0]);
+ return -ENODEV;
+ }
+
+ strlcpy(info->type, "blinkm", I2C_NAME_SIZE);
+ return 0;
+}
+
+static int blinkm_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct blinkm_data *data;
+ struct blinkm_led *led[3];
+ int err, i;
+ char blinkm_led_name[28];
+
+ data = devm_kzalloc(&client->dev,
+ sizeof(struct blinkm_data), GFP_KERNEL);
+ if (!data) {
+ err = -ENOMEM;
+ goto exit;
+ }
+
+ data->i2c_addr = 0x09;
+ data->i2c_addr = 0x08;
+ /* i2c addr - use fake addr of 0x08 initially (real is 0x09) */
+ data->fw_ver = 0xfe;
+ /* firmware version - use fake until we read real value
+ * (currently broken - BlinkM confused!) */
+ data->script_id = 0x01;
+ data->i2c_client = client;
+
+ i2c_set_clientdata(client, data);
+ mutex_init(&data->update_lock);
+
+ /* Register sysfs hooks */
+ err = sysfs_create_group(&client->dev.kobj, &blinkm_group);
+ if (err < 0) {
+ dev_err(&client->dev, "couldn't register sysfs group\n");
+ goto exit;
+ }
+
+ for (i = 0; i < 3; i++) {
+ /* RED = 0, GREEN = 1, BLUE = 2 */
+ led[i] = &data->blinkm_leds[i];
+ led[i]->i2c_client = client;
+ led[i]->id = i;
+ led[i]->led_cdev.max_brightness = 255;
+ led[i]->led_cdev.flags = LED_CORE_SUSPENDRESUME;
+ atomic_set(&led[i]->active, 0);
+ switch (i) {
+ case RED:
+ snprintf(blinkm_led_name, sizeof(blinkm_led_name),
+ "blinkm-%d-%d-red",
+ client->adapter->nr,
+ client->addr);
+ led[i]->led_cdev.name = blinkm_led_name;
+ led[i]->led_cdev.brightness_set = blinkm_led_red_set;
+ err = led_classdev_register(&client->dev,
+ &led[i]->led_cdev);
+ if (err < 0) {
+ dev_err(&client->dev,
+ "couldn't register LED %s\n",
+ led[i]->led_cdev.name);
+ goto failred;
+ }
+ break;
+ case GREEN:
+ snprintf(blinkm_led_name, sizeof(blinkm_led_name),
+ "blinkm-%d-%d-green",
+ client->adapter->nr,
+ client->addr);
+ led[i]->led_cdev.name = blinkm_led_name;
+ led[i]->led_cdev.brightness_set = blinkm_led_green_set;
+ err = led_classdev_register(&client->dev,
+ &led[i]->led_cdev);
+ if (err < 0) {
+ dev_err(&client->dev,
+ "couldn't register LED %s\n",
+ led[i]->led_cdev.name);
+ goto failgreen;
+ }
+ break;
+ case BLUE:
+ snprintf(blinkm_led_name, sizeof(blinkm_led_name),
+ "blinkm-%d-%d-blue",
+ client->adapter->nr,
+ client->addr);
+ led[i]->led_cdev.name = blinkm_led_name;
+ led[i]->led_cdev.brightness_set = blinkm_led_blue_set;
+ err = led_classdev_register(&client->dev,
+ &led[i]->led_cdev);
+ if (err < 0) {
+ dev_err(&client->dev,
+ "couldn't register LED %s\n",
+ led[i]->led_cdev.name);
+ goto failblue;
+ }
+ break;
+ } /* end switch */
+ } /* end for */
+
+ /* Initialize the blinkm */
+ blinkm_init_hw(client);
+
+ return 0;
+
+failblue:
+ led_classdev_unregister(&led[GREEN]->led_cdev);
+
+failgreen:
+ led_classdev_unregister(&led[RED]->led_cdev);
+
+failred:
+ sysfs_remove_group(&client->dev.kobj, &blinkm_group);
+exit:
+ return err;
+}
+
+static int blinkm_remove(struct i2c_client *client)
+{
+ struct blinkm_data *data = i2c_get_clientdata(client);
+ int ret = 0;
+ int i;
+
+ /* make sure no workqueue entries are pending */
+ for (i = 0; i < 3; i++) {
+ flush_scheduled_work();
+ led_classdev_unregister(&data->blinkm_leds[i].led_cdev);
+ }
+
+ /* reset rgb */
+ data->next_red = 0x00;
+ data->next_green = 0x00;
+ data->next_blue = 0x00;
+ ret = blinkm_transfer_hw(client, BLM_FADE_RGB);
+ if (ret < 0)
+ dev_err(&client->dev, "Failure in blinkm_remove ignored. Continuing.\n");
+
+ /* reset hsb */
+ data->next_hue = 0x00;
+ data->next_saturation = 0x00;
+ data->next_brightness = 0x00;
+ ret = blinkm_transfer_hw(client, BLM_FADE_HSB);
+ if (ret < 0)
+ dev_err(&client->dev, "Failure in blinkm_remove ignored. Continuing.\n");
+
+ /* red fade to off */
+ data->next_red = 0xff;
+ ret = blinkm_transfer_hw(client, BLM_GO_RGB);
+ if (ret < 0)
+ dev_err(&client->dev, "Failure in blinkm_remove ignored. Continuing.\n");
+
+ /* off */
+ data->next_red = 0x00;
+ ret = blinkm_transfer_hw(client, BLM_FADE_RGB);
+ if (ret < 0)
+ dev_err(&client->dev, "Failure in blinkm_remove ignored. Continuing.\n");
+
+ sysfs_remove_group(&client->dev.kobj, &blinkm_group);
+ return 0;
+}
+
+static const struct i2c_device_id blinkm_id[] = {
+ {"blinkm", 0},
+ {}
+};
+
+MODULE_DEVICE_TABLE(i2c, blinkm_id);
+
+ /* This is the driver that will be inserted */
+static struct i2c_driver blinkm_driver = {
+ .class = I2C_CLASS_HWMON,
+ .driver = {
+ .name = "blinkm",
+ },
+ .probe = blinkm_probe,
+ .remove = blinkm_remove,
+ .id_table = blinkm_id,
+ .detect = blinkm_detect,
+ .address_list = normal_i2c,
+};
+
+module_i2c_driver(blinkm_driver);
+
+MODULE_AUTHOR("Jan-Simon Moeller <dl9pf@gmx.de>");
+MODULE_DESCRIPTION("BlinkM RGB LED driver");
+MODULE_LICENSE("GPL");
+
diff --git a/kernel/drivers/leds/leds-clevo-mail.c b/kernel/drivers/leds/leds-clevo-mail.c
new file mode 100644
index 000000000..0f9ed1ea0
--- /dev/null
+++ b/kernel/drivers/leds/leds-clevo-mail.c
@@ -0,0 +1,216 @@
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/module.h>
+
+#include <linux/platform_device.h>
+#include <linux/err.h>
+#include <linux/leds.h>
+
+#include <linux/io.h>
+#include <linux/dmi.h>
+
+#include <linux/i8042.h>
+
+#define CLEVO_MAIL_LED_OFF 0x0084
+#define CLEVO_MAIL_LED_BLINK_1HZ 0x008A
+#define CLEVO_MAIL_LED_BLINK_0_5HZ 0x0083
+
+MODULE_AUTHOR("Márton Németh <nm127@freemail.hu>");
+MODULE_DESCRIPTION("Clevo mail LED driver");
+MODULE_LICENSE("GPL");
+
+static bool nodetect;
+module_param_named(nodetect, nodetect, bool, 0);
+MODULE_PARM_DESC(nodetect, "Skip DMI hardware detection");
+
+static struct platform_device *pdev;
+
+static int __init clevo_mail_led_dmi_callback(const struct dmi_system_id *id)
+{
+ pr_info("'%s' found\n", id->ident);
+ return 1;
+}
+
+/*
+ * struct clevo_mail_led_dmi_table - List of known good models
+ *
+ * Contains the known good models this driver is compatible with.
+ * When adding a new model try to be as strict as possible. This
+ * makes it possible to keep the false positives (the model is
+ * detected as working, but in reality it is not) as low as
+ * possible.
+ */
+static struct dmi_system_id clevo_mail_led_dmi_table[] __initdata = {
+ {
+ .callback = clevo_mail_led_dmi_callback,
+ .ident = "Clevo D410J",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "VIA"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "K8N800"),
+ DMI_MATCH(DMI_PRODUCT_VERSION, "VT8204B")
+ }
+ },
+ {
+ .callback = clevo_mail_led_dmi_callback,
+ .ident = "Clevo M5x0N",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "CLEVO Co."),
+ DMI_MATCH(DMI_PRODUCT_NAME, "M5x0N")
+ }
+ },
+ {
+ .callback = clevo_mail_led_dmi_callback,
+ .ident = "Clevo M5x0V",
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "CLEVO Co. "),
+ DMI_MATCH(DMI_BOARD_NAME, "M5X0V "),
+ DMI_MATCH(DMI_PRODUCT_VERSION, "VT6198")
+ }
+ },
+ {
+ .callback = clevo_mail_led_dmi_callback,
+ .ident = "Clevo D400P",
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "Clevo"),
+ DMI_MATCH(DMI_BOARD_NAME, "D400P"),
+ DMI_MATCH(DMI_BOARD_VERSION, "Rev.A"),
+ DMI_MATCH(DMI_PRODUCT_VERSION, "0106")
+ }
+ },
+ {
+ .callback = clevo_mail_led_dmi_callback,
+ .ident = "Clevo D410V",
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "Clevo, Co."),
+ DMI_MATCH(DMI_BOARD_NAME, "D400V/D470V"),
+ DMI_MATCH(DMI_BOARD_VERSION, "SS78B"),
+ DMI_MATCH(DMI_PRODUCT_VERSION, "Rev. A1")
+ }
+ },
+ { }
+};
+MODULE_DEVICE_TABLE(dmi, clevo_mail_led_dmi_table);
+
+static void clevo_mail_led_set(struct led_classdev *led_cdev,
+ enum led_brightness value)
+{
+ i8042_lock_chip();
+
+ if (value == LED_OFF)
+ i8042_command(NULL, CLEVO_MAIL_LED_OFF);
+ else if (value <= LED_HALF)
+ i8042_command(NULL, CLEVO_MAIL_LED_BLINK_0_5HZ);
+ else
+ i8042_command(NULL, CLEVO_MAIL_LED_BLINK_1HZ);
+
+ i8042_unlock_chip();
+
+}
+
+static int clevo_mail_led_blink(struct led_classdev *led_cdev,
+ unsigned long *delay_on,
+ unsigned long *delay_off)
+{
+ int status = -EINVAL;
+
+ i8042_lock_chip();
+
+ if (*delay_on == 0 /* ms */ && *delay_off == 0 /* ms */) {
+ /* Special case: the leds subsystem requested us to
+ * chose one user friendly blinking of the LED, and
+ * start it. Let's blink the led slowly (0.5Hz).
+ */
+ *delay_on = 1000; /* ms */
+ *delay_off = 1000; /* ms */
+ i8042_command(NULL, CLEVO_MAIL_LED_BLINK_0_5HZ);
+ status = 0;
+
+ } else if (*delay_on == 500 /* ms */ && *delay_off == 500 /* ms */) {
+ /* blink the led with 1Hz */
+ i8042_command(NULL, CLEVO_MAIL_LED_BLINK_1HZ);
+ status = 0;
+
+ } else if (*delay_on == 1000 /* ms */ && *delay_off == 1000 /* ms */) {
+ /* blink the led with 0.5Hz */
+ i8042_command(NULL, CLEVO_MAIL_LED_BLINK_0_5HZ);
+ status = 0;
+
+ } else {
+ pr_debug("clevo_mail_led_blink(..., %lu, %lu),"
+ " returning -EINVAL (unsupported)\n",
+ *delay_on, *delay_off);
+ }
+
+ i8042_unlock_chip();
+
+ return status;
+}
+
+static struct led_classdev clevo_mail_led = {
+ .name = "clevo::mail",
+ .brightness_set = clevo_mail_led_set,
+ .blink_set = clevo_mail_led_blink,
+ .flags = LED_CORE_SUSPENDRESUME,
+};
+
+static int __init clevo_mail_led_probe(struct platform_device *pdev)
+{
+ return led_classdev_register(&pdev->dev, &clevo_mail_led);
+}
+
+static int clevo_mail_led_remove(struct platform_device *pdev)
+{
+ led_classdev_unregister(&clevo_mail_led);
+ return 0;
+}
+
+static struct platform_driver clevo_mail_led_driver = {
+ .remove = clevo_mail_led_remove,
+ .driver = {
+ .name = KBUILD_MODNAME,
+ },
+};
+
+static int __init clevo_mail_led_init(void)
+{
+ int error = 0;
+ int count = 0;
+
+ /* Check with the help of DMI if we are running on supported hardware */
+ if (!nodetect) {
+ count = dmi_check_system(clevo_mail_led_dmi_table);
+ } else {
+ count = 1;
+ pr_err("Skipping DMI detection. "
+ "If the driver works on your hardware please "
+ "report model and the output of dmidecode in tracker "
+ "at http://sourceforge.net/projects/clevo-mailled/\n");
+ }
+
+ if (!count)
+ return -ENODEV;
+
+ pdev = platform_device_register_simple(KBUILD_MODNAME, -1, NULL, 0);
+ if (!IS_ERR(pdev)) {
+ error = platform_driver_probe(&clevo_mail_led_driver,
+ clevo_mail_led_probe);
+ if (error) {
+ pr_err("Can't probe platform driver\n");
+ platform_device_unregister(pdev);
+ }
+ } else
+ error = PTR_ERR(pdev);
+
+ return error;
+}
+
+static void __exit clevo_mail_led_exit(void)
+{
+ platform_device_unregister(pdev);
+ platform_driver_unregister(&clevo_mail_led_driver);
+
+ clevo_mail_led_set(NULL, LED_OFF);
+}
+
+module_init(clevo_mail_led_init);
+module_exit(clevo_mail_led_exit);
diff --git a/kernel/drivers/leds/leds-cobalt-qube.c b/kernel/drivers/leds/leds-cobalt-qube.c
new file mode 100644
index 000000000..d97522080
--- /dev/null
+++ b/kernel/drivers/leds/leds-cobalt-qube.c
@@ -0,0 +1,87 @@
+/*
+ * Copyright 2006 - Florian Fainelli <florian@openwrt.org>
+ *
+ * Control the Cobalt Qube/RaQ front LED
+ */
+#include <linux/io.h>
+#include <linux/ioport.h>
+#include <linux/leds.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/types.h>
+
+#define LED_FRONT_LEFT 0x01
+#define LED_FRONT_RIGHT 0x02
+
+static void __iomem *led_port;
+static u8 led_value;
+
+static void qube_front_led_set(struct led_classdev *led_cdev,
+ enum led_brightness brightness)
+{
+ if (brightness)
+ led_value = LED_FRONT_LEFT | LED_FRONT_RIGHT;
+ else
+ led_value = ~(LED_FRONT_LEFT | LED_FRONT_RIGHT);
+ writeb(led_value, led_port);
+}
+
+static struct led_classdev qube_front_led = {
+ .name = "qube::front",
+ .brightness = LED_FULL,
+ .brightness_set = qube_front_led_set,
+ .default_trigger = "default-on",
+};
+
+static int cobalt_qube_led_probe(struct platform_device *pdev)
+{
+ struct resource *res;
+ int retval;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res)
+ return -EBUSY;
+
+ led_port = devm_ioremap(&pdev->dev, res->start, resource_size(res));
+ if (!led_port)
+ return -ENOMEM;
+
+ led_value = LED_FRONT_LEFT | LED_FRONT_RIGHT;
+ writeb(led_value, led_port);
+
+ retval = led_classdev_register(&pdev->dev, &qube_front_led);
+ if (retval)
+ goto err_null;
+
+ return 0;
+
+err_null:
+ led_port = NULL;
+
+ return retval;
+}
+
+static int cobalt_qube_led_remove(struct platform_device *pdev)
+{
+ led_classdev_unregister(&qube_front_led);
+
+ if (led_port)
+ led_port = NULL;
+
+ return 0;
+}
+
+static struct platform_driver cobalt_qube_led_driver = {
+ .probe = cobalt_qube_led_probe,
+ .remove = cobalt_qube_led_remove,
+ .driver = {
+ .name = "cobalt-qube-leds",
+ },
+};
+
+module_platform_driver(cobalt_qube_led_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("Front LED support for Cobalt Server");
+MODULE_AUTHOR("Florian Fainelli <florian@openwrt.org>");
+MODULE_ALIAS("platform:cobalt-qube-leds");
diff --git a/kernel/drivers/leds/leds-cobalt-raq.c b/kernel/drivers/leds/leds-cobalt-raq.c
new file mode 100644
index 000000000..06dbe18a2
--- /dev/null
+++ b/kernel/drivers/leds/leds-cobalt-raq.c
@@ -0,0 +1,135 @@
+/*
+ * LEDs driver for the Cobalt Raq series.
+ *
+ * Copyright (C) 2007 Yoichi Yuasa <yuasa@linux-mips.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/ioport.h>
+#include <linux/leds.h>
+#include <linux/platform_device.h>
+#include <linux/spinlock.h>
+#include <linux/types.h>
+#include <linux/export.h>
+
+#define LED_WEB 0x04
+#define LED_POWER_OFF 0x08
+
+static void __iomem *led_port;
+static u8 led_value;
+static DEFINE_SPINLOCK(led_value_lock);
+
+static void raq_web_led_set(struct led_classdev *led_cdev,
+ enum led_brightness brightness)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&led_value_lock, flags);
+
+ if (brightness)
+ led_value |= LED_WEB;
+ else
+ led_value &= ~LED_WEB;
+ writeb(led_value, led_port);
+
+ spin_unlock_irqrestore(&led_value_lock, flags);
+}
+
+static struct led_classdev raq_web_led = {
+ .name = "raq::web",
+ .brightness_set = raq_web_led_set,
+};
+
+static void raq_power_off_led_set(struct led_classdev *led_cdev,
+ enum led_brightness brightness)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&led_value_lock, flags);
+
+ if (brightness)
+ led_value |= LED_POWER_OFF;
+ else
+ led_value &= ~LED_POWER_OFF;
+ writeb(led_value, led_port);
+
+ spin_unlock_irqrestore(&led_value_lock, flags);
+}
+
+static struct led_classdev raq_power_off_led = {
+ .name = "raq::power-off",
+ .brightness_set = raq_power_off_led_set,
+ .default_trigger = "power-off",
+};
+
+static int cobalt_raq_led_probe(struct platform_device *pdev)
+{
+ struct resource *res;
+ int retval;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res)
+ return -EBUSY;
+
+ led_port = devm_ioremap(&pdev->dev, res->start, resource_size(res));
+ if (!led_port)
+ return -ENOMEM;
+
+ retval = led_classdev_register(&pdev->dev, &raq_power_off_led);
+ if (retval)
+ goto err_null;
+
+ retval = led_classdev_register(&pdev->dev, &raq_web_led);
+ if (retval)
+ goto err_unregister;
+
+ return 0;
+
+err_unregister:
+ led_classdev_unregister(&raq_power_off_led);
+
+err_null:
+ led_port = NULL;
+
+ return retval;
+}
+
+static int cobalt_raq_led_remove(struct platform_device *pdev)
+{
+ led_classdev_unregister(&raq_power_off_led);
+ led_classdev_unregister(&raq_web_led);
+
+ if (led_port)
+ led_port = NULL;
+
+ return 0;
+}
+
+static struct platform_driver cobalt_raq_led_driver = {
+ .probe = cobalt_raq_led_probe,
+ .remove = cobalt_raq_led_remove,
+ .driver = {
+ .name = "cobalt-raq-leds",
+ },
+};
+
+static int __init cobalt_raq_led_init(void)
+{
+ return platform_driver_register(&cobalt_raq_led_driver);
+}
+
+module_init(cobalt_raq_led_init);
diff --git a/kernel/drivers/leds/leds-da903x.c b/kernel/drivers/leds/leds-da903x.c
new file mode 100644
index 000000000..952ba96e5
--- /dev/null
+++ b/kernel/drivers/leds/leds-da903x.c
@@ -0,0 +1,158 @@
+/*
+ * LEDs driver for Dialog Semiconductor DA9030/DA9034
+ *
+ * Copyright (C) 2008 Compulab, Ltd.
+ * Mike Rapoport <mike@compulab.co.il>
+ *
+ * Copyright (C) 2006-2008 Marvell International Ltd.
+ * Eric Miao <eric.miao@marvell.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/leds.h>
+#include <linux/workqueue.h>
+#include <linux/mfd/da903x.h>
+#include <linux/slab.h>
+
+#define DA9030_LED1_CONTROL 0x20
+#define DA9030_LED2_CONTROL 0x21
+#define DA9030_LED3_CONTROL 0x22
+#define DA9030_LED4_CONTROL 0x23
+#define DA9030_LEDPC_CONTROL 0x24
+#define DA9030_MISC_CONTROL_A 0x26 /* Vibrator Control */
+
+#define DA9034_LED1_CONTROL 0x35
+#define DA9034_LED2_CONTROL 0x36
+#define DA9034_VIBRA 0x40
+
+struct da903x_led {
+ struct led_classdev cdev;
+ struct work_struct work;
+ struct device *master;
+ enum led_brightness new_brightness;
+ int id;
+ int flags;
+};
+
+#define DA9030_LED_OFFSET(id) ((id) - DA9030_ID_LED_1)
+#define DA9034_LED_OFFSET(id) ((id) - DA9034_ID_LED_1)
+
+static void da903x_led_work(struct work_struct *work)
+{
+ struct da903x_led *led = container_of(work, struct da903x_led, work);
+ uint8_t val;
+ int offset;
+
+ switch (led->id) {
+ case DA9030_ID_LED_1:
+ case DA9030_ID_LED_2:
+ case DA9030_ID_LED_3:
+ case DA9030_ID_LED_4:
+ case DA9030_ID_LED_PC:
+ offset = DA9030_LED_OFFSET(led->id);
+ val = led->flags & ~0x87;
+ val |= (led->new_brightness) ? 0x80 : 0; /* EN bit */
+ val |= (0x7 - (led->new_brightness >> 5)) & 0x7; /* PWM<2:0> */
+ da903x_write(led->master, DA9030_LED1_CONTROL + offset, val);
+ break;
+ case DA9030_ID_VIBRA:
+ val = led->flags & ~0x80;
+ val |= (led->new_brightness) ? 0x80 : 0; /* EN bit */
+ da903x_write(led->master, DA9030_MISC_CONTROL_A, val);
+ break;
+ case DA9034_ID_LED_1:
+ case DA9034_ID_LED_2:
+ offset = DA9034_LED_OFFSET(led->id);
+ val = (led->new_brightness * 0x5f / LED_FULL) & 0x7f;
+ val |= (led->flags & DA9034_LED_RAMP) ? 0x80 : 0;
+ da903x_write(led->master, DA9034_LED1_CONTROL + offset, val);
+ break;
+ case DA9034_ID_VIBRA:
+ val = led->new_brightness & 0xfe;
+ da903x_write(led->master, DA9034_VIBRA, val);
+ break;
+ }
+}
+
+static void da903x_led_set(struct led_classdev *led_cdev,
+ enum led_brightness value)
+{
+ struct da903x_led *led;
+
+ led = container_of(led_cdev, struct da903x_led, cdev);
+ led->new_brightness = value;
+ schedule_work(&led->work);
+}
+
+static int da903x_led_probe(struct platform_device *pdev)
+{
+ struct led_info *pdata = dev_get_platdata(&pdev->dev);
+ struct da903x_led *led;
+ int id, ret;
+
+ if (pdata == NULL)
+ return 0;
+
+ id = pdev->id;
+
+ if (!((id >= DA9030_ID_LED_1 && id <= DA9030_ID_VIBRA) ||
+ (id >= DA9034_ID_LED_1 && id <= DA9034_ID_VIBRA))) {
+ dev_err(&pdev->dev, "invalid LED ID (%d) specified\n", id);
+ return -EINVAL;
+ }
+
+ led = devm_kzalloc(&pdev->dev, sizeof(struct da903x_led), GFP_KERNEL);
+ if (!led)
+ return -ENOMEM;
+
+ led->cdev.name = pdata->name;
+ led->cdev.default_trigger = pdata->default_trigger;
+ led->cdev.brightness_set = da903x_led_set;
+ led->cdev.brightness = LED_OFF;
+
+ led->id = id;
+ led->flags = pdata->flags;
+ led->master = pdev->dev.parent;
+ led->new_brightness = LED_OFF;
+
+ INIT_WORK(&led->work, da903x_led_work);
+
+ ret = led_classdev_register(led->master, &led->cdev);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to register LED %d\n", id);
+ return ret;
+ }
+
+ platform_set_drvdata(pdev, led);
+ return 0;
+}
+
+static int da903x_led_remove(struct platform_device *pdev)
+{
+ struct da903x_led *led = platform_get_drvdata(pdev);
+
+ led_classdev_unregister(&led->cdev);
+ return 0;
+}
+
+static struct platform_driver da903x_led_driver = {
+ .driver = {
+ .name = "da903x-led",
+ },
+ .probe = da903x_led_probe,
+ .remove = da903x_led_remove,
+};
+
+module_platform_driver(da903x_led_driver);
+
+MODULE_DESCRIPTION("LEDs driver for Dialog Semiconductor DA9030/DA9034");
+MODULE_AUTHOR("Eric Miao <eric.miao@marvell.com>");
+MODULE_AUTHOR("Mike Rapoport <mike@compulab.co.il>");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:da903x-led");
diff --git a/kernel/drivers/leds/leds-da9052.c b/kernel/drivers/leds/leds-da9052.c
new file mode 100644
index 000000000..28291b6ac
--- /dev/null
+++ b/kernel/drivers/leds/leds-da9052.c
@@ -0,0 +1,211 @@
+/*
+ * LED Driver for Dialog DA9052 PMICs.
+ *
+ * Copyright(c) 2012 Dialog Semiconductor Ltd.
+ *
+ * Author: David Dajun Chen <dchen@diasemi.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/leds.h>
+#include <linux/workqueue.h>
+#include <linux/slab.h>
+
+#include <linux/mfd/da9052/reg.h>
+#include <linux/mfd/da9052/da9052.h>
+#include <linux/mfd/da9052/pdata.h>
+
+#define DA9052_OPENDRAIN_OUTPUT 2
+#define DA9052_SET_HIGH_LVL_OUTPUT (1 << 3)
+#define DA9052_MASK_UPPER_NIBBLE 0xF0
+#define DA9052_MASK_LOWER_NIBBLE 0x0F
+#define DA9052_NIBBLE_SHIFT 4
+#define DA9052_MAX_BRIGHTNESS 0x5f
+
+struct da9052_led {
+ struct led_classdev cdev;
+ struct work_struct work;
+ struct da9052 *da9052;
+ unsigned char led_index;
+ unsigned char id;
+ int brightness;
+};
+
+static unsigned char led_reg[] = {
+ DA9052_LED_CONT_4_REG,
+ DA9052_LED_CONT_5_REG,
+};
+
+static int da9052_set_led_brightness(struct da9052_led *led)
+{
+ u8 val;
+ int error;
+
+ val = (led->brightness & 0x7f) | DA9052_LED_CONT_DIM;
+
+ error = da9052_reg_write(led->da9052, led_reg[led->led_index], val);
+ if (error < 0)
+ dev_err(led->da9052->dev, "Failed to set led brightness, %d\n",
+ error);
+ return error;
+}
+
+static void da9052_led_work(struct work_struct *work)
+{
+ struct da9052_led *led = container_of(work, struct da9052_led, work);
+
+ da9052_set_led_brightness(led);
+}
+
+static void da9052_led_set(struct led_classdev *led_cdev,
+ enum led_brightness value)
+{
+ struct da9052_led *led;
+
+ led = container_of(led_cdev, struct da9052_led, cdev);
+ led->brightness = value;
+ schedule_work(&led->work);
+}
+
+static int da9052_configure_leds(struct da9052 *da9052)
+{
+ int error;
+ unsigned char register_value = DA9052_OPENDRAIN_OUTPUT
+ | DA9052_SET_HIGH_LVL_OUTPUT;
+
+ error = da9052_reg_update(da9052, DA9052_GPIO_14_15_REG,
+ DA9052_MASK_LOWER_NIBBLE,
+ register_value);
+
+ if (error < 0) {
+ dev_err(da9052->dev, "Failed to write GPIO 14-15 reg, %d\n",
+ error);
+ return error;
+ }
+
+ error = da9052_reg_update(da9052, DA9052_GPIO_14_15_REG,
+ DA9052_MASK_UPPER_NIBBLE,
+ register_value << DA9052_NIBBLE_SHIFT);
+ if (error < 0)
+ dev_err(da9052->dev, "Failed to write GPIO 14-15 reg, %d\n",
+ error);
+
+ return error;
+}
+
+static int da9052_led_probe(struct platform_device *pdev)
+{
+ struct da9052_pdata *pdata;
+ struct da9052 *da9052;
+ struct led_platform_data *pled;
+ struct da9052_led *led = NULL;
+ int error = -ENODEV;
+ int i;
+
+ da9052 = dev_get_drvdata(pdev->dev.parent);
+ pdata = dev_get_platdata(da9052->dev);
+ if (pdata == NULL) {
+ dev_err(&pdev->dev, "No platform data\n");
+ goto err;
+ }
+
+ pled = pdata->pled;
+ if (pled == NULL) {
+ dev_err(&pdev->dev, "No platform data for LED\n");
+ goto err;
+ }
+
+ led = devm_kzalloc(&pdev->dev,
+ sizeof(struct da9052_led) * pled->num_leds,
+ GFP_KERNEL);
+ if (!led) {
+ error = -ENOMEM;
+ goto err;
+ }
+
+ for (i = 0; i < pled->num_leds; i++) {
+ led[i].cdev.name = pled->leds[i].name;
+ led[i].cdev.brightness_set = da9052_led_set;
+ led[i].cdev.brightness = LED_OFF;
+ led[i].cdev.max_brightness = DA9052_MAX_BRIGHTNESS;
+ led[i].brightness = LED_OFF;
+ led[i].led_index = pled->leds[i].flags;
+ led[i].da9052 = dev_get_drvdata(pdev->dev.parent);
+ INIT_WORK(&led[i].work, da9052_led_work);
+
+ error = led_classdev_register(pdev->dev.parent, &led[i].cdev);
+ if (error) {
+ dev_err(&pdev->dev, "Failed to register led %d\n",
+ led[i].led_index);
+ goto err_register;
+ }
+
+ error = da9052_set_led_brightness(&led[i]);
+ if (error) {
+ dev_err(&pdev->dev, "Unable to init led %d\n",
+ led[i].led_index);
+ continue;
+ }
+ }
+ error = da9052_configure_leds(led->da9052);
+ if (error) {
+ dev_err(&pdev->dev, "Failed to configure GPIO LED%d\n", error);
+ goto err_register;
+ }
+
+ platform_set_drvdata(pdev, led);
+
+ return 0;
+
+err_register:
+ for (i = i - 1; i >= 0; i--) {
+ led_classdev_unregister(&led[i].cdev);
+ cancel_work_sync(&led[i].work);
+ }
+err:
+ return error;
+}
+
+static int da9052_led_remove(struct platform_device *pdev)
+{
+ struct da9052_led *led = platform_get_drvdata(pdev);
+ struct da9052_pdata *pdata;
+ struct da9052 *da9052;
+ struct led_platform_data *pled;
+ int i;
+
+ da9052 = dev_get_drvdata(pdev->dev.parent);
+ pdata = dev_get_platdata(da9052->dev);
+ pled = pdata->pled;
+
+ for (i = 0; i < pled->num_leds; i++) {
+ led[i].brightness = 0;
+ da9052_set_led_brightness(&led[i]);
+ led_classdev_unregister(&led[i].cdev);
+ cancel_work_sync(&led[i].work);
+ }
+
+ return 0;
+}
+
+static struct platform_driver da9052_led_driver = {
+ .driver = {
+ .name = "da9052-leds",
+ },
+ .probe = da9052_led_probe,
+ .remove = da9052_led_remove,
+};
+
+module_platform_driver(da9052_led_driver);
+
+MODULE_AUTHOR("Dialog Semiconductor Ltd <dchen@diasemi.com>");
+MODULE_DESCRIPTION("LED driver for Dialog DA9052 PMIC");
+MODULE_LICENSE("GPL");
diff --git a/kernel/drivers/leds/leds-dac124s085.c b/kernel/drivers/leds/leds-dac124s085.c
new file mode 100644
index 000000000..db3ba8b42
--- /dev/null
+++ b/kernel/drivers/leds/leds-dac124s085.c
@@ -0,0 +1,134 @@
+/*
+ * Copyright 2008
+ * Guennadi Liakhovetski, DENX Software Engineering, <lg@denx.de>
+ *
+ * This file is subject to the terms and conditions of version 2 of
+ * the GNU General Public License. See the file COPYING in the main
+ * directory of this archive for more details.
+ *
+ * LED driver for the DAC124S085 SPI DAC
+ */
+
+#include <linux/leds.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+#include <linux/workqueue.h>
+#include <linux/spi/spi.h>
+
+struct dac124s085_led {
+ struct led_classdev ldev;
+ struct spi_device *spi;
+ int id;
+ int brightness;
+ char name[sizeof("dac124s085-3")];
+
+ struct mutex mutex;
+ struct work_struct work;
+ spinlock_t lock;
+};
+
+struct dac124s085 {
+ struct dac124s085_led leds[4];
+};
+
+#define REG_WRITE (0 << 12)
+#define REG_WRITE_UPDATE (1 << 12)
+#define ALL_WRITE_UPDATE (2 << 12)
+#define POWER_DOWN_OUTPUT (3 << 12)
+
+static void dac124s085_led_work(struct work_struct *work)
+{
+ struct dac124s085_led *led = container_of(work, struct dac124s085_led,
+ work);
+ u16 word;
+
+ mutex_lock(&led->mutex);
+ word = cpu_to_le16(((led->id) << 14) | REG_WRITE_UPDATE |
+ (led->brightness & 0xfff));
+ spi_write(led->spi, (const u8 *)&word, sizeof(word));
+ mutex_unlock(&led->mutex);
+}
+
+static void dac124s085_set_brightness(struct led_classdev *ldev,
+ enum led_brightness brightness)
+{
+ struct dac124s085_led *led = container_of(ldev, struct dac124s085_led,
+ ldev);
+
+ spin_lock(&led->lock);
+ led->brightness = brightness;
+ schedule_work(&led->work);
+ spin_unlock(&led->lock);
+}
+
+static int dac124s085_probe(struct spi_device *spi)
+{
+ struct dac124s085 *dac;
+ struct dac124s085_led *led;
+ int i, ret;
+
+ dac = devm_kzalloc(&spi->dev, sizeof(*dac), GFP_KERNEL);
+ if (!dac)
+ return -ENOMEM;
+
+ spi->bits_per_word = 16;
+
+ for (i = 0; i < ARRAY_SIZE(dac->leds); i++) {
+ led = dac->leds + i;
+ led->id = i;
+ led->brightness = LED_OFF;
+ led->spi = spi;
+ snprintf(led->name, sizeof(led->name), "dac124s085-%d", i);
+ spin_lock_init(&led->lock);
+ INIT_WORK(&led->work, dac124s085_led_work);
+ mutex_init(&led->mutex);
+ led->ldev.name = led->name;
+ led->ldev.brightness = LED_OFF;
+ led->ldev.max_brightness = 0xfff;
+ led->ldev.brightness_set = dac124s085_set_brightness;
+ ret = led_classdev_register(&spi->dev, &led->ldev);
+ if (ret < 0)
+ goto eledcr;
+ }
+
+ spi_set_drvdata(spi, dac);
+
+ return 0;
+
+eledcr:
+ while (i--)
+ led_classdev_unregister(&dac->leds[i].ldev);
+
+ return ret;
+}
+
+static int dac124s085_remove(struct spi_device *spi)
+{
+ struct dac124s085 *dac = spi_get_drvdata(spi);
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(dac->leds); i++) {
+ led_classdev_unregister(&dac->leds[i].ldev);
+ cancel_work_sync(&dac->leds[i].work);
+ }
+
+ return 0;
+}
+
+static struct spi_driver dac124s085_driver = {
+ .probe = dac124s085_probe,
+ .remove = dac124s085_remove,
+ .driver = {
+ .name = "dac124s085",
+ .owner = THIS_MODULE,
+ },
+};
+
+module_spi_driver(dac124s085_driver);
+
+MODULE_AUTHOR("Guennadi Liakhovetski <lg@denx.de>");
+MODULE_DESCRIPTION("DAC124S085 LED driver");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("spi:dac124s085");
diff --git a/kernel/drivers/leds/leds-fsg.c b/kernel/drivers/leds/leds-fsg.c
new file mode 100644
index 000000000..2b4dc738d
--- /dev/null
+++ b/kernel/drivers/leds/leds-fsg.c
@@ -0,0 +1,225 @@
+/*
+ * LED Driver for the Freecom FSG-3
+ *
+ * Copyright (c) 2008 Rod Whitby <rod@whitby.id.au>
+ *
+ * Author: Rod Whitby <rod@whitby.id.au>
+ *
+ * Based on leds-spitz.c
+ * Copyright 2005-2006 Openedhand Ltd.
+ * Author: Richard Purdie <rpurdie@openedhand.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/leds.h>
+#include <linux/module.h>
+#include <linux/io.h>
+#include <mach/hardware.h>
+
+#define FSG_LED_WLAN_BIT 0
+#define FSG_LED_WAN_BIT 1
+#define FSG_LED_SATA_BIT 2
+#define FSG_LED_USB_BIT 4
+#define FSG_LED_RING_BIT 5
+#define FSG_LED_SYNC_BIT 7
+
+static short __iomem *latch_address;
+static unsigned short latch_value;
+
+
+static void fsg_led_wlan_set(struct led_classdev *led_cdev,
+ enum led_brightness value)
+{
+ if (value) {
+ latch_value &= ~(1 << FSG_LED_WLAN_BIT);
+ *latch_address = latch_value;
+ } else {
+ latch_value |= (1 << FSG_LED_WLAN_BIT);
+ *latch_address = latch_value;
+ }
+}
+
+static void fsg_led_wan_set(struct led_classdev *led_cdev,
+ enum led_brightness value)
+{
+ if (value) {
+ latch_value &= ~(1 << FSG_LED_WAN_BIT);
+ *latch_address = latch_value;
+ } else {
+ latch_value |= (1 << FSG_LED_WAN_BIT);
+ *latch_address = latch_value;
+ }
+}
+
+static void fsg_led_sata_set(struct led_classdev *led_cdev,
+ enum led_brightness value)
+{
+ if (value) {
+ latch_value &= ~(1 << FSG_LED_SATA_BIT);
+ *latch_address = latch_value;
+ } else {
+ latch_value |= (1 << FSG_LED_SATA_BIT);
+ *latch_address = latch_value;
+ }
+}
+
+static void fsg_led_usb_set(struct led_classdev *led_cdev,
+ enum led_brightness value)
+{
+ if (value) {
+ latch_value &= ~(1 << FSG_LED_USB_BIT);
+ *latch_address = latch_value;
+ } else {
+ latch_value |= (1 << FSG_LED_USB_BIT);
+ *latch_address = latch_value;
+ }
+}
+
+static void fsg_led_sync_set(struct led_classdev *led_cdev,
+ enum led_brightness value)
+{
+ if (value) {
+ latch_value &= ~(1 << FSG_LED_SYNC_BIT);
+ *latch_address = latch_value;
+ } else {
+ latch_value |= (1 << FSG_LED_SYNC_BIT);
+ *latch_address = latch_value;
+ }
+}
+
+static void fsg_led_ring_set(struct led_classdev *led_cdev,
+ enum led_brightness value)
+{
+ if (value) {
+ latch_value &= ~(1 << FSG_LED_RING_BIT);
+ *latch_address = latch_value;
+ } else {
+ latch_value |= (1 << FSG_LED_RING_BIT);
+ *latch_address = latch_value;
+ }
+}
+
+
+static struct led_classdev fsg_wlan_led = {
+ .name = "fsg:blue:wlan",
+ .brightness_set = fsg_led_wlan_set,
+ .flags = LED_CORE_SUSPENDRESUME,
+};
+
+static struct led_classdev fsg_wan_led = {
+ .name = "fsg:blue:wan",
+ .brightness_set = fsg_led_wan_set,
+ .flags = LED_CORE_SUSPENDRESUME,
+};
+
+static struct led_classdev fsg_sata_led = {
+ .name = "fsg:blue:sata",
+ .brightness_set = fsg_led_sata_set,
+ .flags = LED_CORE_SUSPENDRESUME,
+};
+
+static struct led_classdev fsg_usb_led = {
+ .name = "fsg:blue:usb",
+ .brightness_set = fsg_led_usb_set,
+ .flags = LED_CORE_SUSPENDRESUME,
+};
+
+static struct led_classdev fsg_sync_led = {
+ .name = "fsg:blue:sync",
+ .brightness_set = fsg_led_sync_set,
+ .flags = LED_CORE_SUSPENDRESUME,
+};
+
+static struct led_classdev fsg_ring_led = {
+ .name = "fsg:blue:ring",
+ .brightness_set = fsg_led_ring_set,
+ .flags = LED_CORE_SUSPENDRESUME,
+};
+
+
+static int fsg_led_probe(struct platform_device *pdev)
+{
+ int ret;
+
+ /* Map the LED chip select address space */
+ latch_address = (unsigned short *) devm_ioremap(&pdev->dev,
+ IXP4XX_EXP_BUS_BASE(2), 512);
+ if (!latch_address)
+ return -ENOMEM;
+
+ latch_value = 0xffff;
+ *latch_address = latch_value;
+
+ ret = led_classdev_register(&pdev->dev, &fsg_wlan_led);
+ if (ret < 0)
+ goto failwlan;
+
+ ret = led_classdev_register(&pdev->dev, &fsg_wan_led);
+ if (ret < 0)
+ goto failwan;
+
+ ret = led_classdev_register(&pdev->dev, &fsg_sata_led);
+ if (ret < 0)
+ goto failsata;
+
+ ret = led_classdev_register(&pdev->dev, &fsg_usb_led);
+ if (ret < 0)
+ goto failusb;
+
+ ret = led_classdev_register(&pdev->dev, &fsg_sync_led);
+ if (ret < 0)
+ goto failsync;
+
+ ret = led_classdev_register(&pdev->dev, &fsg_ring_led);
+ if (ret < 0)
+ goto failring;
+
+ return ret;
+
+ failring:
+ led_classdev_unregister(&fsg_sync_led);
+ failsync:
+ led_classdev_unregister(&fsg_usb_led);
+ failusb:
+ led_classdev_unregister(&fsg_sata_led);
+ failsata:
+ led_classdev_unregister(&fsg_wan_led);
+ failwan:
+ led_classdev_unregister(&fsg_wlan_led);
+ failwlan:
+
+ return ret;
+}
+
+static int fsg_led_remove(struct platform_device *pdev)
+{
+ led_classdev_unregister(&fsg_wlan_led);
+ led_classdev_unregister(&fsg_wan_led);
+ led_classdev_unregister(&fsg_sata_led);
+ led_classdev_unregister(&fsg_usb_led);
+ led_classdev_unregister(&fsg_sync_led);
+ led_classdev_unregister(&fsg_ring_led);
+
+ return 0;
+}
+
+
+static struct platform_driver fsg_led_driver = {
+ .probe = fsg_led_probe,
+ .remove = fsg_led_remove,
+ .driver = {
+ .name = "fsg-led",
+ },
+};
+
+module_platform_driver(fsg_led_driver);
+
+MODULE_AUTHOR("Rod Whitby <rod@whitby.id.au>");
+MODULE_DESCRIPTION("Freecom FSG-3 LED driver");
+MODULE_LICENSE("GPL");
diff --git a/kernel/drivers/leds/leds-gpio-register.c b/kernel/drivers/leds/leds-gpio-register.c
new file mode 100644
index 000000000..75717ba68
--- /dev/null
+++ b/kernel/drivers/leds/leds-gpio-register.c
@@ -0,0 +1,45 @@
+/*
+ * Copyright (C) 2011 Pengutronix
+ * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it under
+ * the terms of the GNU General Public License version 2 as published by the
+ * Free Software Foundation.
+ */
+#include <linux/err.h>
+#include <linux/leds.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+
+/**
+ * gpio_led_register_device - register a gpio-led device
+ * @pdata: the platform data used for the new device
+ *
+ * Makes a copy of pdata and pdata->leds and registers a new leds-gpio device
+ * with the result. This allows to have pdata and pdata-leds in .init.rodata
+ * and so saves some bytes compared to a static struct platform_device with
+ * static platform data.
+ *
+ * Returns the registered device or an error pointer.
+ */
+struct platform_device *__init gpio_led_register_device(
+ int id, const struct gpio_led_platform_data *pdata)
+{
+ struct platform_device *ret;
+ struct gpio_led_platform_data _pdata = *pdata;
+
+ if (!pdata->num_leds)
+ return ERR_PTR(-EINVAL);
+
+ _pdata.leds = kmemdup(pdata->leds,
+ pdata->num_leds * sizeof(*pdata->leds), GFP_KERNEL);
+ if (!_pdata.leds)
+ return ERR_PTR(-ENOMEM);
+
+ ret = platform_device_register_resndata(NULL, "leds-gpio", id,
+ NULL, 0, &_pdata, sizeof(_pdata));
+ if (IS_ERR(ret))
+ kfree(_pdata.leds);
+
+ return ret;
+}
diff --git a/kernel/drivers/leds/leds-gpio.c b/kernel/drivers/leds/leds-gpio.c
new file mode 100644
index 000000000..15eb3f86f
--- /dev/null
+++ b/kernel/drivers/leds/leds-gpio.c
@@ -0,0 +1,304 @@
+/*
+ * LEDs driver for GPIOs
+ *
+ * Copyright (C) 2007 8D Technologies inc.
+ * Raphael Assenat <raph@8d.com>
+ * Copyright (C) 2008 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+#include <linux/err.h>
+#include <linux/gpio.h>
+#include <linux/gpio/consumer.h>
+#include <linux/kernel.h>
+#include <linux/leds.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/property.h>
+#include <linux/slab.h>
+#include <linux/workqueue.h>
+
+struct gpio_led_data {
+ struct led_classdev cdev;
+ struct gpio_desc *gpiod;
+ struct work_struct work;
+ u8 new_level;
+ u8 can_sleep;
+ u8 blinking;
+ int (*platform_gpio_blink_set)(struct gpio_desc *desc, int state,
+ unsigned long *delay_on, unsigned long *delay_off);
+};
+
+static void gpio_led_work(struct work_struct *work)
+{
+ struct gpio_led_data *led_dat =
+ container_of(work, struct gpio_led_data, work);
+
+ if (led_dat->blinking) {
+ led_dat->platform_gpio_blink_set(led_dat->gpiod,
+ led_dat->new_level, NULL, NULL);
+ led_dat->blinking = 0;
+ } else
+ gpiod_set_value_cansleep(led_dat->gpiod, led_dat->new_level);
+}
+
+static void gpio_led_set(struct led_classdev *led_cdev,
+ enum led_brightness value)
+{
+ struct gpio_led_data *led_dat =
+ container_of(led_cdev, struct gpio_led_data, cdev);
+ int level;
+
+ if (value == LED_OFF)
+ level = 0;
+ else
+ level = 1;
+
+ /* Setting GPIOs with I2C/etc requires a task context, and we don't
+ * seem to have a reliable way to know if we're already in one; so
+ * let's just assume the worst.
+ */
+ if (led_dat->can_sleep) {
+ led_dat->new_level = level;
+ schedule_work(&led_dat->work);
+ } else {
+ if (led_dat->blinking) {
+ led_dat->platform_gpio_blink_set(led_dat->gpiod, level,
+ NULL, NULL);
+ led_dat->blinking = 0;
+ } else
+ gpiod_set_value(led_dat->gpiod, level);
+ }
+}
+
+static int gpio_blink_set(struct led_classdev *led_cdev,
+ unsigned long *delay_on, unsigned long *delay_off)
+{
+ struct gpio_led_data *led_dat =
+ container_of(led_cdev, struct gpio_led_data, cdev);
+
+ led_dat->blinking = 1;
+ return led_dat->platform_gpio_blink_set(led_dat->gpiod, GPIO_LED_BLINK,
+ delay_on, delay_off);
+}
+
+static int create_gpio_led(const struct gpio_led *template,
+ struct gpio_led_data *led_dat, struct device *parent,
+ int (*blink_set)(struct gpio_desc *, int, unsigned long *,
+ unsigned long *))
+{
+ int ret, state;
+
+ led_dat->gpiod = template->gpiod;
+ if (!led_dat->gpiod) {
+ /*
+ * This is the legacy code path for platform code that
+ * still uses GPIO numbers. Ultimately we would like to get
+ * rid of this block completely.
+ */
+ unsigned long flags = 0;
+
+ /* skip leds that aren't available */
+ if (!gpio_is_valid(template->gpio)) {
+ dev_info(parent, "Skipping unavailable LED gpio %d (%s)\n",
+ template->gpio, template->name);
+ return 0;
+ }
+
+ if (template->active_low)
+ flags |= GPIOF_ACTIVE_LOW;
+
+ ret = devm_gpio_request_one(parent, template->gpio, flags,
+ template->name);
+ if (ret < 0)
+ return ret;
+
+ led_dat->gpiod = gpio_to_desc(template->gpio);
+ if (IS_ERR(led_dat->gpiod))
+ return PTR_ERR(led_dat->gpiod);
+ }
+
+ led_dat->cdev.name = template->name;
+ led_dat->cdev.default_trigger = template->default_trigger;
+ led_dat->can_sleep = gpiod_cansleep(led_dat->gpiod);
+ led_dat->blinking = 0;
+ if (blink_set) {
+ led_dat->platform_gpio_blink_set = blink_set;
+ led_dat->cdev.blink_set = gpio_blink_set;
+ }
+ led_dat->cdev.brightness_set = gpio_led_set;
+ if (template->default_state == LEDS_GPIO_DEFSTATE_KEEP)
+ state = !!gpiod_get_value_cansleep(led_dat->gpiod);
+ else
+ state = (template->default_state == LEDS_GPIO_DEFSTATE_ON);
+ led_dat->cdev.brightness = state ? LED_FULL : LED_OFF;
+ if (!template->retain_state_suspended)
+ led_dat->cdev.flags |= LED_CORE_SUSPENDRESUME;
+
+ ret = gpiod_direction_output(led_dat->gpiod, state);
+ if (ret < 0)
+ return ret;
+
+ INIT_WORK(&led_dat->work, gpio_led_work);
+
+ return led_classdev_register(parent, &led_dat->cdev);
+}
+
+static void delete_gpio_led(struct gpio_led_data *led)
+{
+ led_classdev_unregister(&led->cdev);
+ cancel_work_sync(&led->work);
+}
+
+struct gpio_leds_priv {
+ int num_leds;
+ struct gpio_led_data leds[];
+};
+
+static inline int sizeof_gpio_leds_priv(int num_leds)
+{
+ return sizeof(struct gpio_leds_priv) +
+ (sizeof(struct gpio_led_data) * num_leds);
+}
+
+static struct gpio_leds_priv *gpio_leds_create(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct fwnode_handle *child;
+ struct gpio_leds_priv *priv;
+ int count, ret;
+ struct device_node *np;
+
+ count = device_get_child_node_count(dev);
+ if (!count)
+ return ERR_PTR(-ENODEV);
+
+ priv = devm_kzalloc(dev, sizeof_gpio_leds_priv(count), GFP_KERNEL);
+ if (!priv)
+ return ERR_PTR(-ENOMEM);
+
+ device_for_each_child_node(dev, child) {
+ struct gpio_led led = {};
+ const char *state = NULL;
+
+ led.gpiod = devm_get_gpiod_from_child(dev, NULL, child);
+ if (IS_ERR(led.gpiod)) {
+ fwnode_handle_put(child);
+ ret = PTR_ERR(led.gpiod);
+ goto err;
+ }
+
+ np = of_node(child);
+
+ if (fwnode_property_present(child, "label")) {
+ fwnode_property_read_string(child, "label", &led.name);
+ } else {
+ if (IS_ENABLED(CONFIG_OF) && !led.name && np)
+ led.name = np->name;
+ if (!led.name)
+ return ERR_PTR(-EINVAL);
+ }
+ fwnode_property_read_string(child, "linux,default-trigger",
+ &led.default_trigger);
+
+ if (!fwnode_property_read_string(child, "default-state",
+ &state)) {
+ if (!strcmp(state, "keep"))
+ led.default_state = LEDS_GPIO_DEFSTATE_KEEP;
+ else if (!strcmp(state, "on"))
+ led.default_state = LEDS_GPIO_DEFSTATE_ON;
+ else
+ led.default_state = LEDS_GPIO_DEFSTATE_OFF;
+ }
+
+ if (fwnode_property_present(child, "retain-state-suspended"))
+ led.retain_state_suspended = 1;
+
+ ret = create_gpio_led(&led, &priv->leds[priv->num_leds++],
+ dev, NULL);
+ if (ret < 0) {
+ fwnode_handle_put(child);
+ goto err;
+ }
+ }
+
+ return priv;
+
+err:
+ for (count = priv->num_leds - 2; count >= 0; count--)
+ delete_gpio_led(&priv->leds[count]);
+ return ERR_PTR(ret);
+}
+
+static const struct of_device_id of_gpio_leds_match[] = {
+ { .compatible = "gpio-leds", },
+ {},
+};
+
+MODULE_DEVICE_TABLE(of, of_gpio_leds_match);
+
+static int gpio_led_probe(struct platform_device *pdev)
+{
+ struct gpio_led_platform_data *pdata = dev_get_platdata(&pdev->dev);
+ struct gpio_leds_priv *priv;
+ int i, ret = 0;
+
+ if (pdata && pdata->num_leds) {
+ priv = devm_kzalloc(&pdev->dev,
+ sizeof_gpio_leds_priv(pdata->num_leds),
+ GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ priv->num_leds = pdata->num_leds;
+ for (i = 0; i < priv->num_leds; i++) {
+ ret = create_gpio_led(&pdata->leds[i],
+ &priv->leds[i],
+ &pdev->dev, pdata->gpio_blink_set);
+ if (ret < 0) {
+ /* On failure: unwind the led creations */
+ for (i = i - 1; i >= 0; i--)
+ delete_gpio_led(&priv->leds[i]);
+ return ret;
+ }
+ }
+ } else {
+ priv = gpio_leds_create(pdev);
+ if (IS_ERR(priv))
+ return PTR_ERR(priv);
+ }
+
+ platform_set_drvdata(pdev, priv);
+
+ return 0;
+}
+
+static int gpio_led_remove(struct platform_device *pdev)
+{
+ struct gpio_leds_priv *priv = platform_get_drvdata(pdev);
+ int i;
+
+ for (i = 0; i < priv->num_leds; i++)
+ delete_gpio_led(&priv->leds[i]);
+
+ return 0;
+}
+
+static struct platform_driver gpio_led_driver = {
+ .probe = gpio_led_probe,
+ .remove = gpio_led_remove,
+ .driver = {
+ .name = "leds-gpio",
+ .of_match_table = of_gpio_leds_match,
+ },
+};
+
+module_platform_driver(gpio_led_driver);
+
+MODULE_AUTHOR("Raphael Assenat <raph@8d.com>, Trent Piepho <tpiepho@freescale.com>");
+MODULE_DESCRIPTION("GPIO LED driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:leds-gpio");
diff --git a/kernel/drivers/leds/leds-hp6xx.c b/kernel/drivers/leds/leds-hp6xx.c
new file mode 100644
index 000000000..0b84c0113
--- /dev/null
+++ b/kernel/drivers/leds/leds-hp6xx.c
@@ -0,0 +1,94 @@
+/*
+ * LED Triggers Core
+ * For the HP Jornada 620/660/680/690 handhelds
+ *
+ * Copyright 2008 Kristoffer Ericson <kristoffer.ericson@gmail.com>
+ * this driver is based on leds-spitz.c by Richard Purdie.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/leds.h>
+#include <asm/hd64461.h>
+#include <mach/hp6xx.h>
+
+static void hp6xxled_green_set(struct led_classdev *led_cdev,
+ enum led_brightness value)
+{
+ u8 v8;
+
+ v8 = inb(PKDR);
+ if (value)
+ outb(v8 & (~PKDR_LED_GREEN), PKDR);
+ else
+ outb(v8 | PKDR_LED_GREEN, PKDR);
+}
+
+static void hp6xxled_red_set(struct led_classdev *led_cdev,
+ enum led_brightness value)
+{
+ u16 v16;
+
+ v16 = inw(HD64461_GPBDR);
+ if (value)
+ outw(v16 & (~HD64461_GPBDR_LED_RED), HD64461_GPBDR);
+ else
+ outw(v16 | HD64461_GPBDR_LED_RED, HD64461_GPBDR);
+}
+
+static struct led_classdev hp6xx_red_led = {
+ .name = "hp6xx:red",
+ .default_trigger = "hp6xx-charge",
+ .brightness_set = hp6xxled_red_set,
+ .flags = LED_CORE_SUSPENDRESUME,
+};
+
+static struct led_classdev hp6xx_green_led = {
+ .name = "hp6xx:green",
+ .default_trigger = "ide-disk",
+ .brightness_set = hp6xxled_green_set,
+ .flags = LED_CORE_SUSPENDRESUME,
+};
+
+static int hp6xxled_probe(struct platform_device *pdev)
+{
+ int ret;
+
+ ret = led_classdev_register(&pdev->dev, &hp6xx_red_led);
+ if (ret < 0)
+ return ret;
+
+ ret = led_classdev_register(&pdev->dev, &hp6xx_green_led);
+ if (ret < 0)
+ led_classdev_unregister(&hp6xx_red_led);
+
+ return ret;
+}
+
+static int hp6xxled_remove(struct platform_device *pdev)
+{
+ led_classdev_unregister(&hp6xx_red_led);
+ led_classdev_unregister(&hp6xx_green_led);
+
+ return 0;
+}
+
+static struct platform_driver hp6xxled_driver = {
+ .probe = hp6xxled_probe,
+ .remove = hp6xxled_remove,
+ .driver = {
+ .name = "hp6xx-led",
+ },
+};
+
+module_platform_driver(hp6xxled_driver);
+
+MODULE_AUTHOR("Kristoffer Ericson <kristoffer.ericson@gmail.com>");
+MODULE_DESCRIPTION("HP Jornada 6xx LED driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:hp6xx-led");
diff --git a/kernel/drivers/leds/leds-ipaq-micro.c b/kernel/drivers/leds/leds-ipaq-micro.c
new file mode 100644
index 000000000..3776f516c
--- /dev/null
+++ b/kernel/drivers/leds/leds-ipaq-micro.c
@@ -0,0 +1,141 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * h3xxx atmel micro companion support, notification LED subdevice
+ *
+ * Author : Linus Walleij <linus.walleij@linaro.org>
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/mfd/ipaq-micro.h>
+#include <linux/leds.h>
+
+#define LED_YELLOW 0x00
+#define LED_GREEN 0x01
+
+#define LED_EN (1 << 4) /* LED ON/OFF 0:off, 1:on */
+#define LED_AUTOSTOP (1 << 5) /* LED ON/OFF auto stop set 0:disable, 1:enable */
+#define LED_ALWAYS (1 << 6) /* LED Interrupt Mask 0:No mask, 1:mask */
+
+static void micro_leds_brightness_set(struct led_classdev *led_cdev,
+ enum led_brightness value)
+{
+ struct ipaq_micro *micro = dev_get_drvdata(led_cdev->dev->parent->parent);
+ /*
+ * In this message:
+ * Byte 0 = LED color: 0 = yellow, 1 = green
+ * yellow LED is always ~30 blinks per minute
+ * Byte 1 = duration (flags?) appears to be ignored
+ * Byte 2 = green ontime in 1/10 sec (deciseconds)
+ * 1 = 1/10 second
+ * 0 = 256/10 second
+ * Byte 3 = green offtime in 1/10 sec (deciseconds)
+ * 1 = 1/10 second
+ * 0 = 256/10 seconds
+ */
+ struct ipaq_micro_msg msg = {
+ .id = MSG_NOTIFY_LED,
+ .tx_len = 4,
+ };
+
+ msg.tx_data[0] = LED_GREEN;
+ msg.tx_data[1] = 0;
+ if (value) {
+ msg.tx_data[2] = 0; /* Duty cycle 256 */
+ msg.tx_data[3] = 1;
+ } else {
+ msg.tx_data[2] = 1;
+ msg.tx_data[3] = 0; /* Duty cycle 256 */
+ }
+ ipaq_micro_tx_msg_sync(micro, &msg);
+}
+
+/* Maximum duty cycle in ms 256/10 sec = 25600 ms */
+#define IPAQ_LED_MAX_DUTY 25600
+
+static int micro_leds_blink_set(struct led_classdev *led_cdev,
+ unsigned long *delay_on,
+ unsigned long *delay_off)
+{
+ struct ipaq_micro *micro = dev_get_drvdata(led_cdev->dev->parent->parent);
+ /*
+ * In this message:
+ * Byte 0 = LED color: 0 = yellow, 1 = green
+ * yellow LED is always ~30 blinks per minute
+ * Byte 1 = duration (flags?) appears to be ignored
+ * Byte 2 = green ontime in 1/10 sec (deciseconds)
+ * 1 = 1/10 second
+ * 0 = 256/10 second
+ * Byte 3 = green offtime in 1/10 sec (deciseconds)
+ * 1 = 1/10 second
+ * 0 = 256/10 seconds
+ */
+ struct ipaq_micro_msg msg = {
+ .id = MSG_NOTIFY_LED,
+ .tx_len = 4,
+ };
+
+ msg.tx_data[0] = LED_GREEN;
+ if (*delay_on > IPAQ_LED_MAX_DUTY ||
+ *delay_off > IPAQ_LED_MAX_DUTY)
+ return -EINVAL;
+
+ if (*delay_on == 0 && *delay_off == 0) {
+ *delay_on = 100;
+ *delay_off = 100;
+ }
+
+ msg.tx_data[1] = 0;
+ if (*delay_on >= IPAQ_LED_MAX_DUTY)
+ msg.tx_data[2] = 0;
+ else
+ msg.tx_data[2] = (u8) DIV_ROUND_CLOSEST(*delay_on, 100);
+ if (*delay_off >= IPAQ_LED_MAX_DUTY)
+ msg.tx_data[3] = 0;
+ else
+ msg.tx_data[3] = (u8) DIV_ROUND_CLOSEST(*delay_off, 100);
+ return ipaq_micro_tx_msg_sync(micro, &msg);
+}
+
+static struct led_classdev micro_led = {
+ .name = "led-ipaq-micro",
+ .brightness_set = micro_leds_brightness_set,
+ .blink_set = micro_leds_blink_set,
+ .flags = LED_CORE_SUSPENDRESUME,
+};
+
+static int micro_leds_probe(struct platform_device *pdev)
+{
+ int ret;
+
+ ret = led_classdev_register(&pdev->dev, &micro_led);
+ if (ret) {
+ dev_err(&pdev->dev, "registering led failed: %d\n", ret);
+ return ret;
+ }
+ dev_info(&pdev->dev, "iPAQ micro notification LED driver\n");
+
+ return 0;
+}
+
+static int micro_leds_remove(struct platform_device *pdev)
+{
+ led_classdev_unregister(&micro_led);
+ return 0;
+}
+
+static struct platform_driver micro_leds_device_driver = {
+ .driver = {
+ .name = "ipaq-micro-leds",
+ },
+ .probe = micro_leds_probe,
+ .remove = micro_leds_remove,
+};
+module_platform_driver(micro_leds_device_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("driver for iPAQ Atmel micro leds");
+MODULE_ALIAS("platform:ipaq-micro-leds");
diff --git a/kernel/drivers/leds/leds-lm3530.c b/kernel/drivers/leds/leds-lm3530.c
new file mode 100644
index 000000000..91325de3c
--- /dev/null
+++ b/kernel/drivers/leds/leds-lm3530.c
@@ -0,0 +1,503 @@
+/*
+ * Copyright (C) 2011 ST-Ericsson SA.
+ * Copyright (C) 2009 Motorola, Inc.
+ *
+ * License Terms: GNU General Public License v2
+ *
+ * Simple driver for National Semiconductor LM3530 Backlight driver chip
+ *
+ * Author: Shreshtha Kumar SAHU <shreshthakumar.sahu@stericsson.com>
+ * based on leds-lm3530.c by Dan Murphy <D.Murphy@motorola.com>
+ */
+
+#include <linux/i2c.h>
+#include <linux/leds.h>
+#include <linux/slab.h>
+#include <linux/platform_device.h>
+#include <linux/input.h>
+#include <linux/led-lm3530.h>
+#include <linux/types.h>
+#include <linux/regulator/consumer.h>
+#include <linux/module.h>
+
+#define LM3530_LED_DEV "lcd-backlight"
+#define LM3530_NAME "lm3530-led"
+
+#define LM3530_GEN_CONFIG 0x10
+#define LM3530_ALS_CONFIG 0x20
+#define LM3530_BRT_RAMP_RATE 0x30
+#define LM3530_ALS_IMP_SELECT 0x41
+#define LM3530_BRT_CTRL_REG 0xA0
+#define LM3530_ALS_ZB0_REG 0x60
+#define LM3530_ALS_ZB1_REG 0x61
+#define LM3530_ALS_ZB2_REG 0x62
+#define LM3530_ALS_ZB3_REG 0x63
+#define LM3530_ALS_Z0T_REG 0x70
+#define LM3530_ALS_Z1T_REG 0x71
+#define LM3530_ALS_Z2T_REG 0x72
+#define LM3530_ALS_Z3T_REG 0x73
+#define LM3530_ALS_Z4T_REG 0x74
+#define LM3530_REG_MAX 14
+
+/* General Control Register */
+#define LM3530_EN_I2C_SHIFT (0)
+#define LM3530_RAMP_LAW_SHIFT (1)
+#define LM3530_MAX_CURR_SHIFT (2)
+#define LM3530_EN_PWM_SHIFT (5)
+#define LM3530_PWM_POL_SHIFT (6)
+#define LM3530_EN_PWM_SIMPLE_SHIFT (7)
+
+#define LM3530_ENABLE_I2C (1 << LM3530_EN_I2C_SHIFT)
+#define LM3530_ENABLE_PWM (1 << LM3530_EN_PWM_SHIFT)
+#define LM3530_POL_LOW (1 << LM3530_PWM_POL_SHIFT)
+#define LM3530_ENABLE_PWM_SIMPLE (1 << LM3530_EN_PWM_SIMPLE_SHIFT)
+
+/* ALS Config Register Options */
+#define LM3530_ALS_AVG_TIME_SHIFT (0)
+#define LM3530_EN_ALS_SHIFT (3)
+#define LM3530_ALS_SEL_SHIFT (5)
+
+#define LM3530_ENABLE_ALS (3 << LM3530_EN_ALS_SHIFT)
+
+/* Brightness Ramp Rate Register */
+#define LM3530_BRT_RAMP_FALL_SHIFT (0)
+#define LM3530_BRT_RAMP_RISE_SHIFT (3)
+
+/* ALS Resistor Select */
+#define LM3530_ALS1_IMP_SHIFT (0)
+#define LM3530_ALS2_IMP_SHIFT (4)
+
+/* Zone Boundary Register defaults */
+#define LM3530_ALS_ZB_MAX (4)
+#define LM3530_ALS_WINDOW_mV (1000)
+#define LM3530_ALS_OFFSET_mV (4)
+
+/* Zone Target Register defaults */
+#define LM3530_DEF_ZT_0 (0x7F)
+#define LM3530_DEF_ZT_1 (0x66)
+#define LM3530_DEF_ZT_2 (0x4C)
+#define LM3530_DEF_ZT_3 (0x33)
+#define LM3530_DEF_ZT_4 (0x19)
+
+/* 7 bits are used for the brightness : LM3530_BRT_CTRL_REG */
+#define MAX_BRIGHTNESS (127)
+
+struct lm3530_mode_map {
+ const char *mode;
+ enum lm3530_mode mode_val;
+};
+
+static struct lm3530_mode_map mode_map[] = {
+ { "man", LM3530_BL_MODE_MANUAL },
+ { "als", LM3530_BL_MODE_ALS },
+ { "pwm", LM3530_BL_MODE_PWM },
+};
+
+/**
+ * struct lm3530_data
+ * @led_dev: led class device
+ * @client: i2c client
+ * @pdata: LM3530 platform data
+ * @mode: mode of operation - manual, ALS, PWM
+ * @regulator: regulator
+ * @brighness: previous brightness value
+ * @enable: regulator is enabled
+ */
+struct lm3530_data {
+ struct led_classdev led_dev;
+ struct i2c_client *client;
+ struct lm3530_platform_data *pdata;
+ enum lm3530_mode mode;
+ struct regulator *regulator;
+ enum led_brightness brightness;
+ bool enable;
+};
+
+/*
+ * struct lm3530_als_data
+ * @config : value of ALS configuration register
+ * @imp_sel : value of ALS resistor select register
+ * @zone : values of ALS ZB(Zone Boundary) registers
+ */
+struct lm3530_als_data {
+ u8 config;
+ u8 imp_sel;
+ u8 zones[LM3530_ALS_ZB_MAX];
+};
+
+static const u8 lm3530_reg[LM3530_REG_MAX] = {
+ LM3530_GEN_CONFIG,
+ LM3530_ALS_CONFIG,
+ LM3530_BRT_RAMP_RATE,
+ LM3530_ALS_IMP_SELECT,
+ LM3530_BRT_CTRL_REG,
+ LM3530_ALS_ZB0_REG,
+ LM3530_ALS_ZB1_REG,
+ LM3530_ALS_ZB2_REG,
+ LM3530_ALS_ZB3_REG,
+ LM3530_ALS_Z0T_REG,
+ LM3530_ALS_Z1T_REG,
+ LM3530_ALS_Z2T_REG,
+ LM3530_ALS_Z3T_REG,
+ LM3530_ALS_Z4T_REG,
+};
+
+static int lm3530_get_mode_from_str(const char *str)
+{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(mode_map); i++)
+ if (sysfs_streq(str, mode_map[i].mode))
+ return mode_map[i].mode_val;
+
+ return -EINVAL;
+}
+
+static void lm3530_als_configure(struct lm3530_platform_data *pdata,
+ struct lm3530_als_data *als)
+{
+ int i;
+ u32 als_vmin, als_vmax, als_vstep;
+
+ if (pdata->als_vmax == 0) {
+ pdata->als_vmin = 0;
+ pdata->als_vmax = LM3530_ALS_WINDOW_mV;
+ }
+
+ als_vmin = pdata->als_vmin;
+ als_vmax = pdata->als_vmax;
+
+ if ((als_vmax - als_vmin) > LM3530_ALS_WINDOW_mV)
+ pdata->als_vmax = als_vmax = als_vmin + LM3530_ALS_WINDOW_mV;
+
+ /* n zone boundary makes n+1 zones */
+ als_vstep = (als_vmax - als_vmin) / (LM3530_ALS_ZB_MAX + 1);
+
+ for (i = 0; i < LM3530_ALS_ZB_MAX; i++)
+ als->zones[i] = (((als_vmin + LM3530_ALS_OFFSET_mV) +
+ als_vstep + (i * als_vstep)) * LED_FULL) / 1000;
+
+ als->config =
+ (pdata->als_avrg_time << LM3530_ALS_AVG_TIME_SHIFT) |
+ (LM3530_ENABLE_ALS) |
+ (pdata->als_input_mode << LM3530_ALS_SEL_SHIFT);
+
+ als->imp_sel =
+ (pdata->als1_resistor_sel << LM3530_ALS1_IMP_SHIFT) |
+ (pdata->als2_resistor_sel << LM3530_ALS2_IMP_SHIFT);
+}
+
+static int lm3530_led_enable(struct lm3530_data *drvdata)
+{
+ int ret;
+
+ if (drvdata->enable)
+ return 0;
+
+ ret = regulator_enable(drvdata->regulator);
+ if (ret) {
+ dev_err(drvdata->led_dev.dev, "Failed to enable vin:%d\n", ret);
+ return ret;
+ }
+
+ drvdata->enable = true;
+ return 0;
+}
+
+static void lm3530_led_disable(struct lm3530_data *drvdata)
+{
+ int ret;
+
+ if (!drvdata->enable)
+ return;
+
+ ret = regulator_disable(drvdata->regulator);
+ if (ret) {
+ dev_err(drvdata->led_dev.dev, "Failed to disable vin:%d\n",
+ ret);
+ return;
+ }
+
+ drvdata->enable = false;
+}
+
+static int lm3530_init_registers(struct lm3530_data *drvdata)
+{
+ int ret = 0;
+ int i;
+ u8 gen_config;
+ u8 brt_ramp;
+ u8 brightness;
+ u8 reg_val[LM3530_REG_MAX];
+ struct lm3530_platform_data *pdata = drvdata->pdata;
+ struct i2c_client *client = drvdata->client;
+ struct lm3530_pwm_data *pwm = &pdata->pwm_data;
+ struct lm3530_als_data als;
+
+ memset(&als, 0, sizeof(struct lm3530_als_data));
+
+ gen_config = (pdata->brt_ramp_law << LM3530_RAMP_LAW_SHIFT) |
+ ((pdata->max_current & 7) << LM3530_MAX_CURR_SHIFT);
+
+ switch (drvdata->mode) {
+ case LM3530_BL_MODE_MANUAL:
+ gen_config |= LM3530_ENABLE_I2C;
+ break;
+ case LM3530_BL_MODE_ALS:
+ gen_config |= LM3530_ENABLE_I2C;
+ lm3530_als_configure(pdata, &als);
+ break;
+ case LM3530_BL_MODE_PWM:
+ gen_config |= LM3530_ENABLE_PWM | LM3530_ENABLE_PWM_SIMPLE |
+ (pdata->pwm_pol_hi << LM3530_PWM_POL_SHIFT);
+ break;
+ }
+
+ brt_ramp = (pdata->brt_ramp_fall << LM3530_BRT_RAMP_FALL_SHIFT) |
+ (pdata->brt_ramp_rise << LM3530_BRT_RAMP_RISE_SHIFT);
+
+ if (drvdata->brightness)
+ brightness = drvdata->brightness;
+ else
+ brightness = drvdata->brightness = pdata->brt_val;
+
+ if (brightness > drvdata->led_dev.max_brightness)
+ brightness = drvdata->led_dev.max_brightness;
+
+ reg_val[0] = gen_config; /* LM3530_GEN_CONFIG */
+ reg_val[1] = als.config; /* LM3530_ALS_CONFIG */
+ reg_val[2] = brt_ramp; /* LM3530_BRT_RAMP_RATE */
+ reg_val[3] = als.imp_sel; /* LM3530_ALS_IMP_SELECT */
+ reg_val[4] = brightness; /* LM3530_BRT_CTRL_REG */
+ reg_val[5] = als.zones[0]; /* LM3530_ALS_ZB0_REG */
+ reg_val[6] = als.zones[1]; /* LM3530_ALS_ZB1_REG */
+ reg_val[7] = als.zones[2]; /* LM3530_ALS_ZB2_REG */
+ reg_val[8] = als.zones[3]; /* LM3530_ALS_ZB3_REG */
+ reg_val[9] = LM3530_DEF_ZT_0; /* LM3530_ALS_Z0T_REG */
+ reg_val[10] = LM3530_DEF_ZT_1; /* LM3530_ALS_Z1T_REG */
+ reg_val[11] = LM3530_DEF_ZT_2; /* LM3530_ALS_Z2T_REG */
+ reg_val[12] = LM3530_DEF_ZT_3; /* LM3530_ALS_Z3T_REG */
+ reg_val[13] = LM3530_DEF_ZT_4; /* LM3530_ALS_Z4T_REG */
+
+ ret = lm3530_led_enable(drvdata);
+ if (ret)
+ return ret;
+
+ for (i = 0; i < LM3530_REG_MAX; i++) {
+ /* do not update brightness register when pwm mode */
+ if (lm3530_reg[i] == LM3530_BRT_CTRL_REG &&
+ drvdata->mode == LM3530_BL_MODE_PWM) {
+ if (pwm->pwm_set_intensity)
+ pwm->pwm_set_intensity(reg_val[i],
+ drvdata->led_dev.max_brightness);
+ continue;
+ }
+
+ ret = i2c_smbus_write_byte_data(client,
+ lm3530_reg[i], reg_val[i]);
+ if (ret)
+ break;
+ }
+
+ return ret;
+}
+
+static void lm3530_brightness_set(struct led_classdev *led_cdev,
+ enum led_brightness brt_val)
+{
+ int err;
+ struct lm3530_data *drvdata =
+ container_of(led_cdev, struct lm3530_data, led_dev);
+ struct lm3530_platform_data *pdata = drvdata->pdata;
+ struct lm3530_pwm_data *pwm = &pdata->pwm_data;
+ u8 max_brightness = led_cdev->max_brightness;
+
+ switch (drvdata->mode) {
+ case LM3530_BL_MODE_MANUAL:
+
+ if (!drvdata->enable) {
+ err = lm3530_init_registers(drvdata);
+ if (err) {
+ dev_err(&drvdata->client->dev,
+ "Register Init failed: %d\n", err);
+ break;
+ }
+ }
+
+ /* set the brightness in brightness control register*/
+ err = i2c_smbus_write_byte_data(drvdata->client,
+ LM3530_BRT_CTRL_REG, brt_val);
+ if (err)
+ dev_err(&drvdata->client->dev,
+ "Unable to set brightness: %d\n", err);
+ else
+ drvdata->brightness = brt_val;
+
+ if (brt_val == 0)
+ lm3530_led_disable(drvdata);
+ break;
+ case LM3530_BL_MODE_ALS:
+ break;
+ case LM3530_BL_MODE_PWM:
+ if (pwm->pwm_set_intensity)
+ pwm->pwm_set_intensity(brt_val, max_brightness);
+ break;
+ default:
+ break;
+ }
+}
+
+static ssize_t lm3530_mode_get(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct led_classdev *led_cdev = dev_get_drvdata(dev);
+ struct lm3530_data *drvdata;
+ int i, len = 0;
+
+ drvdata = container_of(led_cdev, struct lm3530_data, led_dev);
+ for (i = 0; i < ARRAY_SIZE(mode_map); i++)
+ if (drvdata->mode == mode_map[i].mode_val)
+ len += sprintf(buf + len, "[%s] ", mode_map[i].mode);
+ else
+ len += sprintf(buf + len, "%s ", mode_map[i].mode);
+
+ len += sprintf(buf + len, "\n");
+
+ return len;
+}
+
+static ssize_t lm3530_mode_set(struct device *dev, struct device_attribute
+ *attr, const char *buf, size_t size)
+{
+ struct led_classdev *led_cdev = dev_get_drvdata(dev);
+ struct lm3530_data *drvdata;
+ struct lm3530_pwm_data *pwm;
+ u8 max_brightness;
+ int mode, err;
+
+ drvdata = container_of(led_cdev, struct lm3530_data, led_dev);
+ pwm = &drvdata->pdata->pwm_data;
+ max_brightness = led_cdev->max_brightness;
+ mode = lm3530_get_mode_from_str(buf);
+ if (mode < 0) {
+ dev_err(dev, "Invalid mode\n");
+ return mode;
+ }
+
+ drvdata->mode = mode;
+
+ /* set pwm to low if unnecessary */
+ if (mode != LM3530_BL_MODE_PWM && pwm->pwm_set_intensity)
+ pwm->pwm_set_intensity(0, max_brightness);
+
+ err = lm3530_init_registers(drvdata);
+ if (err) {
+ dev_err(dev, "Setting %s Mode failed :%d\n", buf, err);
+ return err;
+ }
+
+ return sizeof(drvdata->mode);
+}
+static DEVICE_ATTR(mode, 0644, lm3530_mode_get, lm3530_mode_set);
+
+static struct attribute *lm3530_attrs[] = {
+ &dev_attr_mode.attr,
+ NULL
+};
+ATTRIBUTE_GROUPS(lm3530);
+
+static int lm3530_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct lm3530_platform_data *pdata = dev_get_platdata(&client->dev);
+ struct lm3530_data *drvdata;
+ int err = 0;
+
+ if (pdata == NULL) {
+ dev_err(&client->dev, "platform data required\n");
+ return -ENODEV;
+ }
+
+ /* BL mode */
+ if (pdata->mode > LM3530_BL_MODE_PWM) {
+ dev_err(&client->dev, "Illegal Mode request\n");
+ return -EINVAL;
+ }
+
+ if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) {
+ dev_err(&client->dev, "I2C_FUNC_I2C not supported\n");
+ return -EIO;
+ }
+
+ drvdata = devm_kzalloc(&client->dev, sizeof(struct lm3530_data),
+ GFP_KERNEL);
+ if (drvdata == NULL)
+ return -ENOMEM;
+
+ drvdata->mode = pdata->mode;
+ drvdata->client = client;
+ drvdata->pdata = pdata;
+ drvdata->brightness = LED_OFF;
+ drvdata->enable = false;
+ drvdata->led_dev.name = LM3530_LED_DEV;
+ drvdata->led_dev.brightness_set = lm3530_brightness_set;
+ drvdata->led_dev.max_brightness = MAX_BRIGHTNESS;
+ drvdata->led_dev.groups = lm3530_groups;
+
+ i2c_set_clientdata(client, drvdata);
+
+ drvdata->regulator = devm_regulator_get(&client->dev, "vin");
+ if (IS_ERR(drvdata->regulator)) {
+ dev_err(&client->dev, "regulator get failed\n");
+ err = PTR_ERR(drvdata->regulator);
+ drvdata->regulator = NULL;
+ return err;
+ }
+
+ if (drvdata->pdata->brt_val) {
+ err = lm3530_init_registers(drvdata);
+ if (err < 0) {
+ dev_err(&client->dev,
+ "Register Init failed: %d\n", err);
+ return err;
+ }
+ }
+ err = led_classdev_register(&client->dev, &drvdata->led_dev);
+ if (err < 0) {
+ dev_err(&client->dev, "Register led class failed: %d\n", err);
+ return err;
+ }
+
+ return 0;
+}
+
+static int lm3530_remove(struct i2c_client *client)
+{
+ struct lm3530_data *drvdata = i2c_get_clientdata(client);
+
+ lm3530_led_disable(drvdata);
+ led_classdev_unregister(&drvdata->led_dev);
+ return 0;
+}
+
+static const struct i2c_device_id lm3530_id[] = {
+ {LM3530_NAME, 0},
+ {}
+};
+MODULE_DEVICE_TABLE(i2c, lm3530_id);
+
+static struct i2c_driver lm3530_i2c_driver = {
+ .probe = lm3530_probe,
+ .remove = lm3530_remove,
+ .id_table = lm3530_id,
+ .driver = {
+ .name = LM3530_NAME,
+ .owner = THIS_MODULE,
+ },
+};
+
+module_i2c_driver(lm3530_i2c_driver);
+
+MODULE_DESCRIPTION("Back Light driver for LM3530");
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Shreshtha Kumar SAHU <shreshthakumar.sahu@stericsson.com>");
diff --git a/kernel/drivers/leds/leds-lm3533.c b/kernel/drivers/leds/leds-lm3533.c
new file mode 100644
index 000000000..6e2e02035
--- /dev/null
+++ b/kernel/drivers/leds/leds-lm3533.c
@@ -0,0 +1,779 @@
+/*
+ * leds-lm3533.c -- LM3533 LED driver
+ *
+ * Copyright (C) 2011-2012 Texas Instruments
+ *
+ * Author: Johan Hovold <jhovold@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/module.h>
+#include <linux/leds.h>
+#include <linux/mfd/core.h>
+#include <linux/mutex.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/workqueue.h>
+
+#include <linux/mfd/lm3533.h>
+
+
+#define LM3533_LVCTRLBANK_MIN 2
+#define LM3533_LVCTRLBANK_MAX 5
+#define LM3533_LVCTRLBANK_COUNT 4
+#define LM3533_RISEFALLTIME_MAX 7
+#define LM3533_ALS_CHANNEL_LV_MIN 1
+#define LM3533_ALS_CHANNEL_LV_MAX 2
+
+#define LM3533_REG_CTRLBANK_BCONF_BASE 0x1b
+#define LM3533_REG_PATTERN_ENABLE 0x28
+#define LM3533_REG_PATTERN_LOW_TIME_BASE 0x71
+#define LM3533_REG_PATTERN_HIGH_TIME_BASE 0x72
+#define LM3533_REG_PATTERN_RISETIME_BASE 0x74
+#define LM3533_REG_PATTERN_FALLTIME_BASE 0x75
+
+#define LM3533_REG_PATTERN_STEP 0x10
+
+#define LM3533_REG_CTRLBANK_BCONF_MAPPING_MASK 0x04
+#define LM3533_REG_CTRLBANK_BCONF_ALS_EN_MASK 0x02
+#define LM3533_REG_CTRLBANK_BCONF_ALS_CHANNEL_MASK 0x01
+
+#define LM3533_LED_FLAG_PATTERN_ENABLE 1
+
+
+struct lm3533_led {
+ struct lm3533 *lm3533;
+ struct lm3533_ctrlbank cb;
+ struct led_classdev cdev;
+ int id;
+
+ struct mutex mutex;
+ unsigned long flags;
+
+ struct work_struct work;
+ u8 new_brightness;
+};
+
+
+static inline struct lm3533_led *to_lm3533_led(struct led_classdev *cdev)
+{
+ return container_of(cdev, struct lm3533_led, cdev);
+}
+
+static inline int lm3533_led_get_ctrlbank_id(struct lm3533_led *led)
+{
+ return led->id + 2;
+}
+
+static inline u8 lm3533_led_get_lv_reg(struct lm3533_led *led, u8 base)
+{
+ return base + led->id;
+}
+
+static inline u8 lm3533_led_get_pattern(struct lm3533_led *led)
+{
+ return led->id;
+}
+
+static inline u8 lm3533_led_get_pattern_reg(struct lm3533_led *led,
+ u8 base)
+{
+ return base + lm3533_led_get_pattern(led) * LM3533_REG_PATTERN_STEP;
+}
+
+static int lm3533_led_pattern_enable(struct lm3533_led *led, int enable)
+{
+ u8 mask;
+ u8 val;
+ int pattern;
+ int state;
+ int ret = 0;
+
+ dev_dbg(led->cdev.dev, "%s - %d\n", __func__, enable);
+
+ mutex_lock(&led->mutex);
+
+ state = test_bit(LM3533_LED_FLAG_PATTERN_ENABLE, &led->flags);
+ if ((enable && state) || (!enable && !state))
+ goto out;
+
+ pattern = lm3533_led_get_pattern(led);
+ mask = 1 << (2 * pattern);
+
+ if (enable)
+ val = mask;
+ else
+ val = 0;
+
+ ret = lm3533_update(led->lm3533, LM3533_REG_PATTERN_ENABLE, val, mask);
+ if (ret) {
+ dev_err(led->cdev.dev, "failed to enable pattern %d (%d)\n",
+ pattern, enable);
+ goto out;
+ }
+
+ __change_bit(LM3533_LED_FLAG_PATTERN_ENABLE, &led->flags);
+out:
+ mutex_unlock(&led->mutex);
+
+ return ret;
+}
+
+static void lm3533_led_work(struct work_struct *work)
+{
+ struct lm3533_led *led = container_of(work, struct lm3533_led, work);
+
+ dev_dbg(led->cdev.dev, "%s - %u\n", __func__, led->new_brightness);
+
+ if (led->new_brightness == 0)
+ lm3533_led_pattern_enable(led, 0); /* disable blink */
+
+ lm3533_ctrlbank_set_brightness(&led->cb, led->new_brightness);
+}
+
+static void lm3533_led_set(struct led_classdev *cdev,
+ enum led_brightness value)
+{
+ struct lm3533_led *led = to_lm3533_led(cdev);
+
+ dev_dbg(led->cdev.dev, "%s - %d\n", __func__, value);
+
+ led->new_brightness = value;
+ schedule_work(&led->work);
+}
+
+static enum led_brightness lm3533_led_get(struct led_classdev *cdev)
+{
+ struct lm3533_led *led = to_lm3533_led(cdev);
+ u8 val;
+ int ret;
+
+ ret = lm3533_ctrlbank_get_brightness(&led->cb, &val);
+ if (ret)
+ return ret;
+
+ dev_dbg(led->cdev.dev, "%s - %u\n", __func__, val);
+
+ return val;
+}
+
+/* Pattern generator defines (delays in us). */
+#define LM3533_LED_DELAY1_VMIN 0x00
+#define LM3533_LED_DELAY2_VMIN 0x3d
+#define LM3533_LED_DELAY3_VMIN 0x80
+
+#define LM3533_LED_DELAY1_VMAX (LM3533_LED_DELAY2_VMIN - 1)
+#define LM3533_LED_DELAY2_VMAX (LM3533_LED_DELAY3_VMIN - 1)
+#define LM3533_LED_DELAY3_VMAX 0xff
+
+#define LM3533_LED_DELAY1_TMIN 16384U
+#define LM3533_LED_DELAY2_TMIN 1130496U
+#define LM3533_LED_DELAY3_TMIN 10305536U
+
+#define LM3533_LED_DELAY1_TMAX 999424U
+#define LM3533_LED_DELAY2_TMAX 9781248U
+#define LM3533_LED_DELAY3_TMAX 76890112U
+
+/* t_step = (t_max - t_min) / (v_max - v_min) */
+#define LM3533_LED_DELAY1_TSTEP 16384
+#define LM3533_LED_DELAY2_TSTEP 131072
+#define LM3533_LED_DELAY3_TSTEP 524288
+
+/* Delay limits for hardware accelerated blinking (in ms). */
+#define LM3533_LED_DELAY_ON_MAX \
+ ((LM3533_LED_DELAY2_TMAX + LM3533_LED_DELAY2_TSTEP / 2) / 1000)
+#define LM3533_LED_DELAY_OFF_MAX \
+ ((LM3533_LED_DELAY3_TMAX + LM3533_LED_DELAY3_TSTEP / 2) / 1000)
+
+/*
+ * Returns linear map of *t from [t_min,t_max] to [v_min,v_max] with a step
+ * size of t_step, where
+ *
+ * t_step = (t_max - t_min) / (v_max - v_min)
+ *
+ * and updates *t to reflect the mapped value.
+ */
+static u8 time_to_val(unsigned *t, unsigned t_min, unsigned t_step,
+ u8 v_min, u8 v_max)
+{
+ unsigned val;
+
+ val = (*t + t_step / 2 - t_min) / t_step + v_min;
+
+ *t = t_step * (val - v_min) + t_min;
+
+ return (u8)val;
+}
+
+/*
+ * Returns time code corresponding to *delay (in ms) and updates *delay to
+ * reflect actual hardware delay.
+ *
+ * Hardware supports 256 discrete delay times, divided into three groups with
+ * the following ranges and step-sizes:
+ *
+ * [ 16, 999] [0x00, 0x3e] step 16 ms
+ * [ 1130, 9781] [0x3d, 0x7f] step 131 ms
+ * [10306, 76890] [0x80, 0xff] step 524 ms
+ *
+ * Note that delay group 3 is only available for delay_off.
+ */
+static u8 lm3533_led_get_hw_delay(unsigned *delay)
+{
+ unsigned t;
+ u8 val;
+
+ t = *delay * 1000;
+
+ if (t >= (LM3533_LED_DELAY2_TMAX + LM3533_LED_DELAY3_TMIN) / 2) {
+ t = clamp(t, LM3533_LED_DELAY3_TMIN, LM3533_LED_DELAY3_TMAX);
+ val = time_to_val(&t, LM3533_LED_DELAY3_TMIN,
+ LM3533_LED_DELAY3_TSTEP,
+ LM3533_LED_DELAY3_VMIN,
+ LM3533_LED_DELAY3_VMAX);
+ } else if (t >= (LM3533_LED_DELAY1_TMAX + LM3533_LED_DELAY2_TMIN) / 2) {
+ t = clamp(t, LM3533_LED_DELAY2_TMIN, LM3533_LED_DELAY2_TMAX);
+ val = time_to_val(&t, LM3533_LED_DELAY2_TMIN,
+ LM3533_LED_DELAY2_TSTEP,
+ LM3533_LED_DELAY2_VMIN,
+ LM3533_LED_DELAY2_VMAX);
+ } else {
+ t = clamp(t, LM3533_LED_DELAY1_TMIN, LM3533_LED_DELAY1_TMAX);
+ val = time_to_val(&t, LM3533_LED_DELAY1_TMIN,
+ LM3533_LED_DELAY1_TSTEP,
+ LM3533_LED_DELAY1_VMIN,
+ LM3533_LED_DELAY1_VMAX);
+ }
+
+ *delay = (t + 500) / 1000;
+
+ return val;
+}
+
+/*
+ * Set delay register base to *delay (in ms) and update *delay to reflect
+ * actual hardware delay used.
+ */
+static u8 lm3533_led_delay_set(struct lm3533_led *led, u8 base,
+ unsigned long *delay)
+{
+ unsigned t;
+ u8 val;
+ u8 reg;
+ int ret;
+
+ t = (unsigned)*delay;
+
+ /* Delay group 3 is only available for low time (delay off). */
+ if (base != LM3533_REG_PATTERN_LOW_TIME_BASE)
+ t = min(t, LM3533_LED_DELAY2_TMAX / 1000);
+
+ val = lm3533_led_get_hw_delay(&t);
+
+ dev_dbg(led->cdev.dev, "%s - %lu: %u (0x%02x)\n", __func__,
+ *delay, t, val);
+ reg = lm3533_led_get_pattern_reg(led, base);
+ ret = lm3533_write(led->lm3533, reg, val);
+ if (ret)
+ dev_err(led->cdev.dev, "failed to set delay (%02x)\n", reg);
+
+ *delay = t;
+
+ return ret;
+}
+
+static int lm3533_led_delay_on_set(struct lm3533_led *led, unsigned long *t)
+{
+ return lm3533_led_delay_set(led, LM3533_REG_PATTERN_HIGH_TIME_BASE, t);
+}
+
+static int lm3533_led_delay_off_set(struct lm3533_led *led, unsigned long *t)
+{
+ return lm3533_led_delay_set(led, LM3533_REG_PATTERN_LOW_TIME_BASE, t);
+}
+
+static int lm3533_led_blink_set(struct led_classdev *cdev,
+ unsigned long *delay_on,
+ unsigned long *delay_off)
+{
+ struct lm3533_led *led = to_lm3533_led(cdev);
+ int ret;
+
+ dev_dbg(led->cdev.dev, "%s - on = %lu, off = %lu\n", __func__,
+ *delay_on, *delay_off);
+
+ if (*delay_on > LM3533_LED_DELAY_ON_MAX ||
+ *delay_off > LM3533_LED_DELAY_OFF_MAX)
+ return -EINVAL;
+
+ if (*delay_on == 0 && *delay_off == 0) {
+ *delay_on = 500;
+ *delay_off = 500;
+ }
+
+ ret = lm3533_led_delay_on_set(led, delay_on);
+ if (ret)
+ return ret;
+
+ ret = lm3533_led_delay_off_set(led, delay_off);
+ if (ret)
+ return ret;
+
+ return lm3533_led_pattern_enable(led, 1);
+}
+
+static ssize_t show_id(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct led_classdev *led_cdev = dev_get_drvdata(dev);
+ struct lm3533_led *led = to_lm3533_led(led_cdev);
+
+ return scnprintf(buf, PAGE_SIZE, "%d\n", led->id);
+}
+
+/*
+ * Pattern generator rise/fall times:
+ *
+ * 0 - 2048 us (default)
+ * 1 - 262 ms
+ * 2 - 524 ms
+ * 3 - 1.049 s
+ * 4 - 2.097 s
+ * 5 - 4.194 s
+ * 6 - 8.389 s
+ * 7 - 16.78 s
+ */
+static ssize_t show_risefalltime(struct device *dev,
+ struct device_attribute *attr,
+ char *buf, u8 base)
+{
+ struct led_classdev *led_cdev = dev_get_drvdata(dev);
+ struct lm3533_led *led = to_lm3533_led(led_cdev);
+ ssize_t ret;
+ u8 reg;
+ u8 val;
+
+ reg = lm3533_led_get_pattern_reg(led, base);
+ ret = lm3533_read(led->lm3533, reg, &val);
+ if (ret)
+ return ret;
+
+ return scnprintf(buf, PAGE_SIZE, "%x\n", val);
+}
+
+static ssize_t show_risetime(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ return show_risefalltime(dev, attr, buf,
+ LM3533_REG_PATTERN_RISETIME_BASE);
+}
+
+static ssize_t show_falltime(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ return show_risefalltime(dev, attr, buf,
+ LM3533_REG_PATTERN_FALLTIME_BASE);
+}
+
+static ssize_t store_risefalltime(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t len, u8 base)
+{
+ struct led_classdev *led_cdev = dev_get_drvdata(dev);
+ struct lm3533_led *led = to_lm3533_led(led_cdev);
+ u8 val;
+ u8 reg;
+ int ret;
+
+ if (kstrtou8(buf, 0, &val) || val > LM3533_RISEFALLTIME_MAX)
+ return -EINVAL;
+
+ reg = lm3533_led_get_pattern_reg(led, base);
+ ret = lm3533_write(led->lm3533, reg, val);
+ if (ret)
+ return ret;
+
+ return len;
+}
+
+static ssize_t store_risetime(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t len)
+{
+ return store_risefalltime(dev, attr, buf, len,
+ LM3533_REG_PATTERN_RISETIME_BASE);
+}
+
+static ssize_t store_falltime(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t len)
+{
+ return store_risefalltime(dev, attr, buf, len,
+ LM3533_REG_PATTERN_FALLTIME_BASE);
+}
+
+static ssize_t show_als_channel(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct led_classdev *led_cdev = dev_get_drvdata(dev);
+ struct lm3533_led *led = to_lm3533_led(led_cdev);
+ unsigned channel;
+ u8 reg;
+ u8 val;
+ int ret;
+
+ reg = lm3533_led_get_lv_reg(led, LM3533_REG_CTRLBANK_BCONF_BASE);
+ ret = lm3533_read(led->lm3533, reg, &val);
+ if (ret)
+ return ret;
+
+ channel = (val & LM3533_REG_CTRLBANK_BCONF_ALS_CHANNEL_MASK) + 1;
+
+ return scnprintf(buf, PAGE_SIZE, "%u\n", channel);
+}
+
+static ssize_t store_als_channel(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t len)
+{
+ struct led_classdev *led_cdev = dev_get_drvdata(dev);
+ struct lm3533_led *led = to_lm3533_led(led_cdev);
+ unsigned channel;
+ u8 reg;
+ u8 val;
+ u8 mask;
+ int ret;
+
+ if (kstrtouint(buf, 0, &channel))
+ return -EINVAL;
+
+ if (channel < LM3533_ALS_CHANNEL_LV_MIN ||
+ channel > LM3533_ALS_CHANNEL_LV_MAX)
+ return -EINVAL;
+
+ reg = lm3533_led_get_lv_reg(led, LM3533_REG_CTRLBANK_BCONF_BASE);
+ mask = LM3533_REG_CTRLBANK_BCONF_ALS_CHANNEL_MASK;
+ val = channel - 1;
+
+ ret = lm3533_update(led->lm3533, reg, val, mask);
+ if (ret)
+ return ret;
+
+ return len;
+}
+
+static ssize_t show_als_en(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct led_classdev *led_cdev = dev_get_drvdata(dev);
+ struct lm3533_led *led = to_lm3533_led(led_cdev);
+ bool enable;
+ u8 reg;
+ u8 val;
+ int ret;
+
+ reg = lm3533_led_get_lv_reg(led, LM3533_REG_CTRLBANK_BCONF_BASE);
+ ret = lm3533_read(led->lm3533, reg, &val);
+ if (ret)
+ return ret;
+
+ enable = val & LM3533_REG_CTRLBANK_BCONF_ALS_EN_MASK;
+
+ return scnprintf(buf, PAGE_SIZE, "%d\n", enable);
+}
+
+static ssize_t store_als_en(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t len)
+{
+ struct led_classdev *led_cdev = dev_get_drvdata(dev);
+ struct lm3533_led *led = to_lm3533_led(led_cdev);
+ unsigned enable;
+ u8 reg;
+ u8 mask;
+ u8 val;
+ int ret;
+
+ if (kstrtouint(buf, 0, &enable))
+ return -EINVAL;
+
+ reg = lm3533_led_get_lv_reg(led, LM3533_REG_CTRLBANK_BCONF_BASE);
+ mask = LM3533_REG_CTRLBANK_BCONF_ALS_EN_MASK;
+
+ if (enable)
+ val = mask;
+ else
+ val = 0;
+
+ ret = lm3533_update(led->lm3533, reg, val, mask);
+ if (ret)
+ return ret;
+
+ return len;
+}
+
+static ssize_t show_linear(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct led_classdev *led_cdev = dev_get_drvdata(dev);
+ struct lm3533_led *led = to_lm3533_led(led_cdev);
+ u8 reg;
+ u8 val;
+ int linear;
+ int ret;
+
+ reg = lm3533_led_get_lv_reg(led, LM3533_REG_CTRLBANK_BCONF_BASE);
+ ret = lm3533_read(led->lm3533, reg, &val);
+ if (ret)
+ return ret;
+
+ if (val & LM3533_REG_CTRLBANK_BCONF_MAPPING_MASK)
+ linear = 1;
+ else
+ linear = 0;
+
+ return scnprintf(buf, PAGE_SIZE, "%x\n", linear);
+}
+
+static ssize_t store_linear(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t len)
+{
+ struct led_classdev *led_cdev = dev_get_drvdata(dev);
+ struct lm3533_led *led = to_lm3533_led(led_cdev);
+ unsigned long linear;
+ u8 reg;
+ u8 mask;
+ u8 val;
+ int ret;
+
+ if (kstrtoul(buf, 0, &linear))
+ return -EINVAL;
+
+ reg = lm3533_led_get_lv_reg(led, LM3533_REG_CTRLBANK_BCONF_BASE);
+ mask = LM3533_REG_CTRLBANK_BCONF_MAPPING_MASK;
+
+ if (linear)
+ val = mask;
+ else
+ val = 0;
+
+ ret = lm3533_update(led->lm3533, reg, val, mask);
+ if (ret)
+ return ret;
+
+ return len;
+}
+
+static ssize_t show_pwm(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct led_classdev *led_cdev = dev_get_drvdata(dev);
+ struct lm3533_led *led = to_lm3533_led(led_cdev);
+ u8 val;
+ int ret;
+
+ ret = lm3533_ctrlbank_get_pwm(&led->cb, &val);
+ if (ret)
+ return ret;
+
+ return scnprintf(buf, PAGE_SIZE, "%u\n", val);
+}
+
+static ssize_t store_pwm(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t len)
+{
+ struct led_classdev *led_cdev = dev_get_drvdata(dev);
+ struct lm3533_led *led = to_lm3533_led(led_cdev);
+ u8 val;
+ int ret;
+
+ if (kstrtou8(buf, 0, &val))
+ return -EINVAL;
+
+ ret = lm3533_ctrlbank_set_pwm(&led->cb, val);
+ if (ret)
+ return ret;
+
+ return len;
+}
+
+static LM3533_ATTR_RW(als_channel);
+static LM3533_ATTR_RW(als_en);
+static LM3533_ATTR_RW(falltime);
+static LM3533_ATTR_RO(id);
+static LM3533_ATTR_RW(linear);
+static LM3533_ATTR_RW(pwm);
+static LM3533_ATTR_RW(risetime);
+
+static struct attribute *lm3533_led_attributes[] = {
+ &dev_attr_als_channel.attr,
+ &dev_attr_als_en.attr,
+ &dev_attr_falltime.attr,
+ &dev_attr_id.attr,
+ &dev_attr_linear.attr,
+ &dev_attr_pwm.attr,
+ &dev_attr_risetime.attr,
+ NULL,
+};
+
+static umode_t lm3533_led_attr_is_visible(struct kobject *kobj,
+ struct attribute *attr, int n)
+{
+ struct device *dev = container_of(kobj, struct device, kobj);
+ struct led_classdev *led_cdev = dev_get_drvdata(dev);
+ struct lm3533_led *led = to_lm3533_led(led_cdev);
+ umode_t mode = attr->mode;
+
+ if (attr == &dev_attr_als_channel.attr ||
+ attr == &dev_attr_als_en.attr) {
+ if (!led->lm3533->have_als)
+ mode = 0;
+ }
+
+ return mode;
+};
+
+static struct attribute_group lm3533_led_attribute_group = {
+ .is_visible = lm3533_led_attr_is_visible,
+ .attrs = lm3533_led_attributes
+};
+
+static const struct attribute_group *lm3533_led_attribute_groups[] = {
+ &lm3533_led_attribute_group,
+ NULL
+};
+
+static int lm3533_led_setup(struct lm3533_led *led,
+ struct lm3533_led_platform_data *pdata)
+{
+ int ret;
+
+ ret = lm3533_ctrlbank_set_max_current(&led->cb, pdata->max_current);
+ if (ret)
+ return ret;
+
+ return lm3533_ctrlbank_set_pwm(&led->cb, pdata->pwm);
+}
+
+static int lm3533_led_probe(struct platform_device *pdev)
+{
+ struct lm3533 *lm3533;
+ struct lm3533_led_platform_data *pdata;
+ struct lm3533_led *led;
+ int ret;
+
+ dev_dbg(&pdev->dev, "%s\n", __func__);
+
+ lm3533 = dev_get_drvdata(pdev->dev.parent);
+ if (!lm3533)
+ return -EINVAL;
+
+ pdata = dev_get_platdata(&pdev->dev);
+ if (!pdata) {
+ dev_err(&pdev->dev, "no platform data\n");
+ return -EINVAL;
+ }
+
+ if (pdev->id < 0 || pdev->id >= LM3533_LVCTRLBANK_COUNT) {
+ dev_err(&pdev->dev, "illegal LED id %d\n", pdev->id);
+ return -EINVAL;
+ }
+
+ led = devm_kzalloc(&pdev->dev, sizeof(*led), GFP_KERNEL);
+ if (!led)
+ return -ENOMEM;
+
+ led->lm3533 = lm3533;
+ led->cdev.name = pdata->name;
+ led->cdev.default_trigger = pdata->default_trigger;
+ led->cdev.brightness_set = lm3533_led_set;
+ led->cdev.brightness_get = lm3533_led_get;
+ led->cdev.blink_set = lm3533_led_blink_set;
+ led->cdev.brightness = LED_OFF;
+ led->cdev.groups = lm3533_led_attribute_groups,
+ led->id = pdev->id;
+
+ mutex_init(&led->mutex);
+ INIT_WORK(&led->work, lm3533_led_work);
+
+ /* The class framework makes a callback to get brightness during
+ * registration so use parent device (for error reporting) until
+ * registered.
+ */
+ led->cb.lm3533 = lm3533;
+ led->cb.id = lm3533_led_get_ctrlbank_id(led);
+ led->cb.dev = lm3533->dev;
+
+ platform_set_drvdata(pdev, led);
+
+ ret = led_classdev_register(pdev->dev.parent, &led->cdev);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to register LED %d\n", pdev->id);
+ return ret;
+ }
+
+ led->cb.dev = led->cdev.dev;
+
+ ret = lm3533_led_setup(led, pdata);
+ if (ret)
+ goto err_unregister;
+
+ ret = lm3533_ctrlbank_enable(&led->cb);
+ if (ret)
+ goto err_unregister;
+
+ return 0;
+
+err_unregister:
+ led_classdev_unregister(&led->cdev);
+ flush_work(&led->work);
+
+ return ret;
+}
+
+static int lm3533_led_remove(struct platform_device *pdev)
+{
+ struct lm3533_led *led = platform_get_drvdata(pdev);
+
+ dev_dbg(&pdev->dev, "%s\n", __func__);
+
+ lm3533_ctrlbank_disable(&led->cb);
+ led_classdev_unregister(&led->cdev);
+ flush_work(&led->work);
+
+ return 0;
+}
+
+static void lm3533_led_shutdown(struct platform_device *pdev)
+{
+
+ struct lm3533_led *led = platform_get_drvdata(pdev);
+
+ dev_dbg(&pdev->dev, "%s\n", __func__);
+
+ lm3533_ctrlbank_disable(&led->cb);
+ lm3533_led_set(&led->cdev, LED_OFF); /* disable blink */
+ flush_work(&led->work);
+}
+
+static struct platform_driver lm3533_led_driver = {
+ .driver = {
+ .name = "lm3533-leds",
+ },
+ .probe = lm3533_led_probe,
+ .remove = lm3533_led_remove,
+ .shutdown = lm3533_led_shutdown,
+};
+module_platform_driver(lm3533_led_driver);
+
+MODULE_AUTHOR("Johan Hovold <jhovold@gmail.com>");
+MODULE_DESCRIPTION("LM3533 LED driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:lm3533-leds");
diff --git a/kernel/drivers/leds/leds-lm355x.c b/kernel/drivers/leds/leds-lm355x.c
new file mode 100644
index 000000000..f5112cb2d
--- /dev/null
+++ b/kernel/drivers/leds/leds-lm355x.c
@@ -0,0 +1,571 @@
+/*
+* Simple driver for Texas Instruments LM355x LED Flash driver chip
+* Copyright (C) 2012 Texas Instruments
+*
+* This program is free software; you can redistribute it and/or modify
+* it under the terms of the GNU General Public License version 2 as
+* published by the Free Software Foundation.
+*/
+
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/i2c.h>
+#include <linux/gpio.h>
+#include <linux/leds.h>
+#include <linux/slab.h>
+#include <linux/platform_device.h>
+#include <linux/fs.h>
+#include <linux/regmap.h>
+#include <linux/workqueue.h>
+#include <linux/platform_data/leds-lm355x.h>
+
+enum lm355x_type {
+ CHIP_LM3554 = 0,
+ CHIP_LM3556,
+};
+
+enum lm355x_regs {
+ REG_FLAG = 0,
+ REG_TORCH_CFG,
+ REG_TORCH_CTRL,
+ REG_STROBE_CFG,
+ REG_FLASH_CTRL,
+ REG_INDI_CFG,
+ REG_INDI_CTRL,
+ REG_OPMODE,
+ REG_MAX,
+};
+
+/* operation mode */
+enum lm355x_mode {
+ MODE_SHDN = 0,
+ MODE_INDIC,
+ MODE_TORCH,
+ MODE_FLASH
+};
+
+/* register map info. */
+struct lm355x_reg_data {
+ u8 regno;
+ u8 mask;
+ u8 shift;
+};
+
+struct lm355x_chip_data {
+ struct device *dev;
+ enum lm355x_type type;
+
+ struct led_classdev cdev_flash;
+ struct led_classdev cdev_torch;
+ struct led_classdev cdev_indicator;
+
+ struct work_struct work_flash;
+ struct work_struct work_torch;
+ struct work_struct work_indicator;
+
+ u8 br_flash;
+ u8 br_torch;
+ u8 br_indicator;
+
+ struct lm355x_platform_data *pdata;
+ struct regmap *regmap;
+ struct mutex lock;
+
+ unsigned int last_flag;
+ struct lm355x_reg_data *regs;
+};
+
+/* specific indicator function for lm3556 */
+enum lm3556_indic_pulse_time {
+ PULSE_TIME_0_MS = 0,
+ PULSE_TIME_32_MS,
+ PULSE_TIME_64_MS,
+ PULSE_TIME_92_MS,
+ PULSE_TIME_128_MS,
+ PULSE_TIME_160_MS,
+ PULSE_TIME_196_MS,
+ PULSE_TIME_224_MS,
+ PULSE_TIME_256_MS,
+ PULSE_TIME_288_MS,
+ PULSE_TIME_320_MS,
+ PULSE_TIME_352_MS,
+ PULSE_TIME_384_MS,
+ PULSE_TIME_416_MS,
+ PULSE_TIME_448_MS,
+ PULSE_TIME_480_MS,
+};
+
+enum lm3556_indic_n_blank {
+ INDIC_N_BLANK_0 = 0,
+ INDIC_N_BLANK_1,
+ INDIC_N_BLANK_2,
+ INDIC_N_BLANK_3,
+ INDIC_N_BLANK_4,
+ INDIC_N_BLANK_5,
+ INDIC_N_BLANK_6,
+ INDIC_N_BLANK_7,
+ INDIC_N_BLANK_8,
+ INDIC_N_BLANK_9,
+ INDIC_N_BLANK_10,
+ INDIC_N_BLANK_11,
+ INDIC_N_BLANK_12,
+ INDIC_N_BLANK_13,
+ INDIC_N_BLANK_14,
+ INDIC_N_BLANK_15,
+};
+
+enum lm3556_indic_period {
+ INDIC_PERIOD_0 = 0,
+ INDIC_PERIOD_1,
+ INDIC_PERIOD_2,
+ INDIC_PERIOD_3,
+ INDIC_PERIOD_4,
+ INDIC_PERIOD_5,
+ INDIC_PERIOD_6,
+ INDIC_PERIOD_7,
+};
+
+#define INDIC_PATTERN_SIZE 4
+
+struct indicator {
+ u8 blinking;
+ u8 period_cnt;
+};
+
+/* indicator pattern data only for lm3556 */
+static struct indicator indicator_pattern[INDIC_PATTERN_SIZE] = {
+ [0] = {(INDIC_N_BLANK_1 << 4) | PULSE_TIME_32_MS, INDIC_PERIOD_1},
+ [1] = {(INDIC_N_BLANK_15 << 4) | PULSE_TIME_32_MS, INDIC_PERIOD_2},
+ [2] = {(INDIC_N_BLANK_10 << 4) | PULSE_TIME_32_MS, INDIC_PERIOD_4},
+ [3] = {(INDIC_N_BLANK_5 << 4) | PULSE_TIME_32_MS, INDIC_PERIOD_7},
+};
+
+static struct lm355x_reg_data lm3554_regs[REG_MAX] = {
+ [REG_FLAG] = {0xD0, 0xBF, 0},
+ [REG_TORCH_CFG] = {0xE0, 0x80, 7},
+ [REG_TORCH_CTRL] = {0xA0, 0x38, 3},
+ [REG_STROBE_CFG] = {0xE0, 0x04, 2},
+ [REG_FLASH_CTRL] = {0xB0, 0x78, 3},
+ [REG_INDI_CFG] = {0xE0, 0x08, 3},
+ [REG_INDI_CTRL] = {0xA0, 0xC0, 6},
+ [REG_OPMODE] = {0xA0, 0x03, 0},
+};
+
+static struct lm355x_reg_data lm3556_regs[REG_MAX] = {
+ [REG_FLAG] = {0x0B, 0xFF, 0},
+ [REG_TORCH_CFG] = {0x0A, 0x10, 4},
+ [REG_TORCH_CTRL] = {0x09, 0x70, 4},
+ [REG_STROBE_CFG] = {0x0A, 0x20, 5},
+ [REG_FLASH_CTRL] = {0x09, 0x0F, 0},
+ [REG_INDI_CFG] = {0xFF, 0xFF, 0},
+ [REG_INDI_CTRL] = {0x09, 0x70, 4},
+ [REG_OPMODE] = {0x0A, 0x03, 0},
+};
+
+static char lm355x_name[][I2C_NAME_SIZE] = {
+ [CHIP_LM3554] = LM3554_NAME,
+ [CHIP_LM3556] = LM3556_NAME,
+};
+
+/* chip initialize */
+static int lm355x_chip_init(struct lm355x_chip_data *chip)
+{
+ int ret;
+ unsigned int reg_val;
+ struct lm355x_platform_data *pdata = chip->pdata;
+
+ /* input and output pins configuration */
+ switch (chip->type) {
+ case CHIP_LM3554:
+ reg_val = pdata->pin_tx2 | pdata->ntc_pin;
+ ret = regmap_update_bits(chip->regmap, 0xE0, 0x28, reg_val);
+ if (ret < 0)
+ goto out;
+ reg_val = pdata->pass_mode;
+ ret = regmap_update_bits(chip->regmap, 0xA0, 0x04, reg_val);
+ if (ret < 0)
+ goto out;
+ break;
+
+ case CHIP_LM3556:
+ reg_val = pdata->pin_tx2 | pdata->ntc_pin | pdata->pass_mode;
+ ret = regmap_update_bits(chip->regmap, 0x0A, 0xC4, reg_val);
+ if (ret < 0)
+ goto out;
+ break;
+ default:
+ return -ENODATA;
+ }
+
+ return ret;
+out:
+ dev_err(chip->dev, "%s:i2c access fail to register\n", __func__);
+ return ret;
+}
+
+/* chip control */
+static void lm355x_control(struct lm355x_chip_data *chip,
+ u8 brightness, enum lm355x_mode opmode)
+{
+ int ret;
+ unsigned int reg_val;
+ struct lm355x_platform_data *pdata = chip->pdata;
+ struct lm355x_reg_data *preg = chip->regs;
+
+ ret = regmap_read(chip->regmap, preg[REG_FLAG].regno, &chip->last_flag);
+ if (ret < 0)
+ goto out;
+ if (chip->last_flag & preg[REG_FLAG].mask)
+ dev_info(chip->dev, "%s Last FLAG is 0x%x\n",
+ lm355x_name[chip->type],
+ chip->last_flag & preg[REG_FLAG].mask);
+ /* brightness 0 means shutdown */
+ if (!brightness)
+ opmode = MODE_SHDN;
+
+ switch (opmode) {
+ case MODE_TORCH:
+ ret =
+ regmap_update_bits(chip->regmap, preg[REG_TORCH_CTRL].regno,
+ preg[REG_TORCH_CTRL].mask,
+ (brightness - 1)
+ << preg[REG_TORCH_CTRL].shift);
+ if (ret < 0)
+ goto out;
+
+ if (pdata->pin_tx1 != LM355x_PIN_TORCH_DISABLE) {
+ ret =
+ regmap_update_bits(chip->regmap,
+ preg[REG_TORCH_CFG].regno,
+ preg[REG_TORCH_CFG].mask,
+ 0x01 <<
+ preg[REG_TORCH_CFG].shift);
+ if (ret < 0)
+ goto out;
+ opmode = MODE_SHDN;
+ dev_info(chip->dev,
+ "torch brt is set - ext. torch pin mode\n");
+ }
+ break;
+
+ case MODE_FLASH:
+
+ ret =
+ regmap_update_bits(chip->regmap, preg[REG_FLASH_CTRL].regno,
+ preg[REG_FLASH_CTRL].mask,
+ (brightness - 1)
+ << preg[REG_FLASH_CTRL].shift);
+ if (ret < 0)
+ goto out;
+
+ if (pdata->pin_strobe != LM355x_PIN_STROBE_DISABLE) {
+ if (chip->type == CHIP_LM3554)
+ reg_val = 0x00;
+ else
+ reg_val = 0x01;
+ ret =
+ regmap_update_bits(chip->regmap,
+ preg[REG_STROBE_CFG].regno,
+ preg[REG_STROBE_CFG].mask,
+ reg_val <<
+ preg[REG_STROBE_CFG].shift);
+ if (ret < 0)
+ goto out;
+ opmode = MODE_SHDN;
+ dev_info(chip->dev,
+ "flash brt is set - ext. strobe pin mode\n");
+ }
+ break;
+
+ case MODE_INDIC:
+ ret =
+ regmap_update_bits(chip->regmap, preg[REG_INDI_CTRL].regno,
+ preg[REG_INDI_CTRL].mask,
+ (brightness - 1)
+ << preg[REG_INDI_CTRL].shift);
+ if (ret < 0)
+ goto out;
+
+ if (pdata->pin_tx2 != LM355x_PIN_TX_DISABLE) {
+ ret =
+ regmap_update_bits(chip->regmap,
+ preg[REG_INDI_CFG].regno,
+ preg[REG_INDI_CFG].mask,
+ 0x01 <<
+ preg[REG_INDI_CFG].shift);
+ if (ret < 0)
+ goto out;
+ opmode = MODE_SHDN;
+ }
+ break;
+ case MODE_SHDN:
+ break;
+ default:
+ return;
+ }
+ /* operation mode control */
+ ret = regmap_update_bits(chip->regmap, preg[REG_OPMODE].regno,
+ preg[REG_OPMODE].mask,
+ opmode << preg[REG_OPMODE].shift);
+ if (ret < 0)
+ goto out;
+ return;
+out:
+ dev_err(chip->dev, "%s:i2c access fail to register\n", __func__);
+ return;
+}
+
+/* torch */
+static void lm355x_deferred_torch_brightness_set(struct work_struct *work)
+{
+ struct lm355x_chip_data *chip =
+ container_of(work, struct lm355x_chip_data, work_torch);
+
+ mutex_lock(&chip->lock);
+ lm355x_control(chip, chip->br_torch, MODE_TORCH);
+ mutex_unlock(&chip->lock);
+}
+
+static void lm355x_torch_brightness_set(struct led_classdev *cdev,
+ enum led_brightness brightness)
+{
+ struct lm355x_chip_data *chip =
+ container_of(cdev, struct lm355x_chip_data, cdev_torch);
+
+ chip->br_torch = brightness;
+ schedule_work(&chip->work_torch);
+}
+
+/* flash */
+static void lm355x_deferred_strobe_brightness_set(struct work_struct *work)
+{
+ struct lm355x_chip_data *chip =
+ container_of(work, struct lm355x_chip_data, work_flash);
+
+ mutex_lock(&chip->lock);
+ lm355x_control(chip, chip->br_flash, MODE_FLASH);
+ mutex_unlock(&chip->lock);
+}
+
+static void lm355x_strobe_brightness_set(struct led_classdev *cdev,
+ enum led_brightness brightness)
+{
+ struct lm355x_chip_data *chip =
+ container_of(cdev, struct lm355x_chip_data, cdev_flash);
+
+ chip->br_flash = brightness;
+ schedule_work(&chip->work_flash);
+}
+
+/* indicator */
+static void lm355x_deferred_indicator_brightness_set(struct work_struct *work)
+{
+ struct lm355x_chip_data *chip =
+ container_of(work, struct lm355x_chip_data, work_indicator);
+
+ mutex_lock(&chip->lock);
+ lm355x_control(chip, chip->br_indicator, MODE_INDIC);
+ mutex_unlock(&chip->lock);
+}
+
+static void lm355x_indicator_brightness_set(struct led_classdev *cdev,
+ enum led_brightness brightness)
+{
+ struct lm355x_chip_data *chip =
+ container_of(cdev, struct lm355x_chip_data, cdev_indicator);
+
+ chip->br_indicator = brightness;
+ schedule_work(&chip->work_indicator);
+}
+
+/* indicator pattern only for lm3556*/
+static ssize_t lm3556_indicator_pattern_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t size)
+{
+ ssize_t ret;
+ struct led_classdev *led_cdev = dev_get_drvdata(dev);
+ struct lm355x_chip_data *chip =
+ container_of(led_cdev, struct lm355x_chip_data, cdev_indicator);
+ unsigned int state;
+
+ ret = kstrtouint(buf, 10, &state);
+ if (ret)
+ goto out;
+ if (state > INDIC_PATTERN_SIZE - 1)
+ state = INDIC_PATTERN_SIZE - 1;
+
+ ret = regmap_write(chip->regmap, 0x04,
+ indicator_pattern[state].blinking);
+ if (ret < 0)
+ goto out;
+
+ ret = regmap_write(chip->regmap, 0x05,
+ indicator_pattern[state].period_cnt);
+ if (ret < 0)
+ goto out;
+
+ return size;
+out:
+ dev_err(chip->dev, "%s:i2c access fail to register\n", __func__);
+ return ret;
+}
+
+static DEVICE_ATTR(pattern, S_IWUSR, NULL, lm3556_indicator_pattern_store);
+
+static struct attribute *lm355x_indicator_attrs[] = {
+ &dev_attr_pattern.attr,
+ NULL
+};
+ATTRIBUTE_GROUPS(lm355x_indicator);
+
+static const struct regmap_config lm355x_regmap = {
+ .reg_bits = 8,
+ .val_bits = 8,
+ .max_register = 0xFF,
+};
+
+/* module initialize */
+static int lm355x_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct lm355x_platform_data *pdata = dev_get_platdata(&client->dev);
+ struct lm355x_chip_data *chip;
+
+ int err;
+
+ if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) {
+ dev_err(&client->dev, "i2c functionality check fail.\n");
+ return -EOPNOTSUPP;
+ }
+
+ if (pdata == NULL) {
+ dev_err(&client->dev, "needs Platform Data.\n");
+ return -ENODATA;
+ }
+
+ chip = devm_kzalloc(&client->dev,
+ sizeof(struct lm355x_chip_data), GFP_KERNEL);
+ if (!chip)
+ return -ENOMEM;
+
+ chip->dev = &client->dev;
+ chip->type = id->driver_data;
+ switch (id->driver_data) {
+ case CHIP_LM3554:
+ chip->regs = lm3554_regs;
+ break;
+ case CHIP_LM3556:
+ chip->regs = lm3556_regs;
+ break;
+ default:
+ return -ENOSYS;
+ }
+ chip->pdata = pdata;
+
+ chip->regmap = devm_regmap_init_i2c(client, &lm355x_regmap);
+ if (IS_ERR(chip->regmap)) {
+ err = PTR_ERR(chip->regmap);
+ dev_err(&client->dev,
+ "Failed to allocate register map: %d\n", err);
+ return err;
+ }
+
+ mutex_init(&chip->lock);
+ i2c_set_clientdata(client, chip);
+
+ err = lm355x_chip_init(chip);
+ if (err < 0)
+ goto err_out;
+
+ /* flash */
+ INIT_WORK(&chip->work_flash, lm355x_deferred_strobe_brightness_set);
+ chip->cdev_flash.name = "flash";
+ chip->cdev_flash.max_brightness = 16;
+ chip->cdev_flash.brightness_set = lm355x_strobe_brightness_set;
+ chip->cdev_flash.default_trigger = "flash";
+ err = led_classdev_register((struct device *)
+ &client->dev, &chip->cdev_flash);
+ if (err < 0)
+ goto err_out;
+ /* torch */
+ INIT_WORK(&chip->work_torch, lm355x_deferred_torch_brightness_set);
+ chip->cdev_torch.name = "torch";
+ chip->cdev_torch.max_brightness = 8;
+ chip->cdev_torch.brightness_set = lm355x_torch_brightness_set;
+ chip->cdev_torch.default_trigger = "torch";
+ err = led_classdev_register((struct device *)
+ &client->dev, &chip->cdev_torch);
+ if (err < 0)
+ goto err_create_torch_file;
+ /* indicator */
+ INIT_WORK(&chip->work_indicator,
+ lm355x_deferred_indicator_brightness_set);
+ chip->cdev_indicator.name = "indicator";
+ if (id->driver_data == CHIP_LM3554)
+ chip->cdev_indicator.max_brightness = 4;
+ else
+ chip->cdev_indicator.max_brightness = 8;
+ chip->cdev_indicator.brightness_set = lm355x_indicator_brightness_set;
+ /* indicator pattern control only for LM3556 */
+ if (id->driver_data == CHIP_LM3556)
+ chip->cdev_indicator.groups = lm355x_indicator_groups;
+ err = led_classdev_register((struct device *)
+ &client->dev, &chip->cdev_indicator);
+ if (err < 0)
+ goto err_create_indicator_file;
+
+ dev_info(&client->dev, "%s is initialized\n",
+ lm355x_name[id->driver_data]);
+ return 0;
+
+err_create_indicator_file:
+ led_classdev_unregister(&chip->cdev_torch);
+err_create_torch_file:
+ led_classdev_unregister(&chip->cdev_flash);
+err_out:
+ return err;
+}
+
+static int lm355x_remove(struct i2c_client *client)
+{
+ struct lm355x_chip_data *chip = i2c_get_clientdata(client);
+ struct lm355x_reg_data *preg = chip->regs;
+
+ regmap_write(chip->regmap, preg[REG_OPMODE].regno, 0);
+ led_classdev_unregister(&chip->cdev_indicator);
+ flush_work(&chip->work_indicator);
+ led_classdev_unregister(&chip->cdev_torch);
+ flush_work(&chip->work_torch);
+ led_classdev_unregister(&chip->cdev_flash);
+ flush_work(&chip->work_flash);
+ dev_info(&client->dev, "%s is removed\n", lm355x_name[chip->type]);
+
+ return 0;
+}
+
+static const struct i2c_device_id lm355x_id[] = {
+ {LM3554_NAME, CHIP_LM3554},
+ {LM3556_NAME, CHIP_LM3556},
+ {}
+};
+
+MODULE_DEVICE_TABLE(i2c, lm355x_id);
+
+static struct i2c_driver lm355x_i2c_driver = {
+ .driver = {
+ .name = LM355x_NAME,
+ .owner = THIS_MODULE,
+ .pm = NULL,
+ },
+ .probe = lm355x_probe,
+ .remove = lm355x_remove,
+ .id_table = lm355x_id,
+};
+
+module_i2c_driver(lm355x_i2c_driver);
+
+MODULE_DESCRIPTION("Texas Instruments Flash Lighting driver for LM355x");
+MODULE_AUTHOR("Daniel Jeong <daniel.jeong@ti.com>");
+MODULE_AUTHOR("G.Shark Jeong <gshark.jeong@gmail.com>");
+MODULE_LICENSE("GPL v2");
diff --git a/kernel/drivers/leds/leds-lm3642.c b/kernel/drivers/leds/leds-lm3642.c
new file mode 100644
index 000000000..d3dec0132
--- /dev/null
+++ b/kernel/drivers/leds/leds-lm3642.c
@@ -0,0 +1,462 @@
+/*
+* Simple driver for Texas Instruments LM3642 LED Flash driver chip
+* Copyright (C) 2012 Texas Instruments
+*
+* This program is free software; you can redistribute it and/or modify
+* it under the terms of the GNU General Public License version 2 as
+* published by the Free Software Foundation.
+*
+*/
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/i2c.h>
+#include <linux/leds.h>
+#include <linux/slab.h>
+#include <linux/platform_device.h>
+#include <linux/fs.h>
+#include <linux/regmap.h>
+#include <linux/workqueue.h>
+#include <linux/platform_data/leds-lm3642.h>
+
+#define REG_FILT_TIME (0x0)
+#define REG_IVFM_MODE (0x1)
+#define REG_TORCH_TIME (0x6)
+#define REG_FLASH (0x8)
+#define REG_I_CTRL (0x9)
+#define REG_ENABLE (0xA)
+#define REG_FLAG (0xB)
+#define REG_MAX (0xB)
+
+#define UVLO_EN_SHIFT (7)
+#define IVM_D_TH_SHIFT (2)
+#define TORCH_RAMP_UP_TIME_SHIFT (3)
+#define TORCH_RAMP_DN_TIME_SHIFT (0)
+#define INDUCTOR_I_LIMIT_SHIFT (6)
+#define FLASH_RAMP_TIME_SHIFT (3)
+#define FLASH_TOUT_TIME_SHIFT (0)
+#define TORCH_I_SHIFT (4)
+#define FLASH_I_SHIFT (0)
+#define IVFM_SHIFT (7)
+#define TX_PIN_EN_SHIFT (6)
+#define STROBE_PIN_EN_SHIFT (5)
+#define TORCH_PIN_EN_SHIFT (4)
+#define MODE_BITS_SHIFT (0)
+
+#define UVLO_EN_MASK (0x1)
+#define IVM_D_TH_MASK (0x7)
+#define TORCH_RAMP_UP_TIME_MASK (0x7)
+#define TORCH_RAMP_DN_TIME_MASK (0x7)
+#define INDUCTOR_I_LIMIT_MASK (0x1)
+#define FLASH_RAMP_TIME_MASK (0x7)
+#define FLASH_TOUT_TIME_MASK (0x7)
+#define TORCH_I_MASK (0x7)
+#define FLASH_I_MASK (0xF)
+#define IVFM_MASK (0x1)
+#define TX_PIN_EN_MASK (0x1)
+#define STROBE_PIN_EN_MASK (0x1)
+#define TORCH_PIN_EN_MASK (0x1)
+#define MODE_BITS_MASK (0x73)
+#define EX_PIN_CONTROL_MASK (0x71)
+#define EX_PIN_ENABLE_MASK (0x70)
+
+enum lm3642_mode {
+ MODES_STASNDBY = 0,
+ MODES_INDIC,
+ MODES_TORCH,
+ MODES_FLASH
+};
+
+struct lm3642_chip_data {
+ struct device *dev;
+
+ struct led_classdev cdev_flash;
+ struct led_classdev cdev_torch;
+ struct led_classdev cdev_indicator;
+
+ struct work_struct work_flash;
+ struct work_struct work_torch;
+ struct work_struct work_indicator;
+
+ u8 br_flash;
+ u8 br_torch;
+ u8 br_indicator;
+
+ enum lm3642_torch_pin_enable torch_pin;
+ enum lm3642_strobe_pin_enable strobe_pin;
+ enum lm3642_tx_pin_enable tx_pin;
+
+ struct lm3642_platform_data *pdata;
+ struct regmap *regmap;
+ struct mutex lock;
+
+ unsigned int last_flag;
+};
+
+/* chip initialize */
+static int lm3642_chip_init(struct lm3642_chip_data *chip)
+{
+ int ret;
+ struct lm3642_platform_data *pdata = chip->pdata;
+
+ /* set enable register */
+ ret = regmap_update_bits(chip->regmap, REG_ENABLE, EX_PIN_ENABLE_MASK,
+ pdata->tx_pin);
+ if (ret < 0)
+ dev_err(chip->dev, "Failed to update REG_ENABLE Register\n");
+ return ret;
+}
+
+/* chip control */
+static int lm3642_control(struct lm3642_chip_data *chip,
+ u8 brightness, enum lm3642_mode opmode)
+{
+ int ret;
+
+ ret = regmap_read(chip->regmap, REG_FLAG, &chip->last_flag);
+ if (ret < 0) {
+ dev_err(chip->dev, "Failed to read REG_FLAG Register\n");
+ goto out;
+ }
+
+ if (chip->last_flag)
+ dev_info(chip->dev, "Last FLAG is 0x%x\n", chip->last_flag);
+
+ /* brightness 0 means off-state */
+ if (!brightness)
+ opmode = MODES_STASNDBY;
+
+ switch (opmode) {
+ case MODES_TORCH:
+ ret = regmap_update_bits(chip->regmap, REG_I_CTRL,
+ TORCH_I_MASK << TORCH_I_SHIFT,
+ (brightness - 1) << TORCH_I_SHIFT);
+
+ if (chip->torch_pin)
+ opmode |= (TORCH_PIN_EN_MASK << TORCH_PIN_EN_SHIFT);
+ break;
+
+ case MODES_FLASH:
+ ret = regmap_update_bits(chip->regmap, REG_I_CTRL,
+ FLASH_I_MASK << FLASH_I_SHIFT,
+ (brightness - 1) << FLASH_I_SHIFT);
+
+ if (chip->strobe_pin)
+ opmode |= (STROBE_PIN_EN_MASK << STROBE_PIN_EN_SHIFT);
+ break;
+
+ case MODES_INDIC:
+ ret = regmap_update_bits(chip->regmap, REG_I_CTRL,
+ TORCH_I_MASK << TORCH_I_SHIFT,
+ (brightness - 1) << TORCH_I_SHIFT);
+ break;
+
+ case MODES_STASNDBY:
+
+ break;
+
+ default:
+ return ret;
+ }
+ if (ret < 0) {
+ dev_err(chip->dev, "Failed to write REG_I_CTRL Register\n");
+ goto out;
+ }
+
+ if (chip->tx_pin)
+ opmode |= (TX_PIN_EN_MASK << TX_PIN_EN_SHIFT);
+
+ ret = regmap_update_bits(chip->regmap, REG_ENABLE,
+ MODE_BITS_MASK << MODE_BITS_SHIFT,
+ opmode << MODE_BITS_SHIFT);
+out:
+ return ret;
+}
+
+/* torch */
+
+/* torch pin config for lm3642*/
+static ssize_t lm3642_torch_pin_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t size)
+{
+ ssize_t ret;
+ struct led_classdev *led_cdev = dev_get_drvdata(dev);
+ struct lm3642_chip_data *chip =
+ container_of(led_cdev, struct lm3642_chip_data, cdev_indicator);
+ unsigned int state;
+
+ ret = kstrtouint(buf, 10, &state);
+ if (ret)
+ goto out_strtoint;
+ if (state != 0)
+ state = 0x01 << TORCH_PIN_EN_SHIFT;
+
+ chip->torch_pin = state;
+ ret = regmap_update_bits(chip->regmap, REG_ENABLE,
+ TORCH_PIN_EN_MASK << TORCH_PIN_EN_SHIFT,
+ state);
+ if (ret < 0)
+ goto out;
+
+ return size;
+out:
+ dev_err(chip->dev, "%s:i2c access fail to register\n", __func__);
+ return ret;
+out_strtoint:
+ dev_err(chip->dev, "%s: fail to change str to int\n", __func__);
+ return ret;
+}
+
+static DEVICE_ATTR(torch_pin, S_IWUSR, NULL, lm3642_torch_pin_store);
+
+static void lm3642_deferred_torch_brightness_set(struct work_struct *work)
+{
+ struct lm3642_chip_data *chip =
+ container_of(work, struct lm3642_chip_data, work_torch);
+
+ mutex_lock(&chip->lock);
+ lm3642_control(chip, chip->br_torch, MODES_TORCH);
+ mutex_unlock(&chip->lock);
+}
+
+static void lm3642_torch_brightness_set(struct led_classdev *cdev,
+ enum led_brightness brightness)
+{
+ struct lm3642_chip_data *chip =
+ container_of(cdev, struct lm3642_chip_data, cdev_torch);
+
+ chip->br_torch = brightness;
+ schedule_work(&chip->work_torch);
+}
+
+/* flash */
+
+/* strobe pin config for lm3642*/
+static ssize_t lm3642_strobe_pin_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t size)
+{
+ ssize_t ret;
+ struct led_classdev *led_cdev = dev_get_drvdata(dev);
+ struct lm3642_chip_data *chip =
+ container_of(led_cdev, struct lm3642_chip_data, cdev_indicator);
+ unsigned int state;
+
+ ret = kstrtouint(buf, 10, &state);
+ if (ret)
+ goto out_strtoint;
+ if (state != 0)
+ state = 0x01 << STROBE_PIN_EN_SHIFT;
+
+ chip->strobe_pin = state;
+ ret = regmap_update_bits(chip->regmap, REG_ENABLE,
+ STROBE_PIN_EN_MASK << STROBE_PIN_EN_SHIFT,
+ state);
+ if (ret < 0)
+ goto out;
+
+ return size;
+out:
+ dev_err(chip->dev, "%s:i2c access fail to register\n", __func__);
+ return ret;
+out_strtoint:
+ dev_err(chip->dev, "%s: fail to change str to int\n", __func__);
+ return ret;
+}
+
+static DEVICE_ATTR(strobe_pin, S_IWUSR, NULL, lm3642_strobe_pin_store);
+
+static void lm3642_deferred_strobe_brightness_set(struct work_struct *work)
+{
+ struct lm3642_chip_data *chip =
+ container_of(work, struct lm3642_chip_data, work_flash);
+
+ mutex_lock(&chip->lock);
+ lm3642_control(chip, chip->br_flash, MODES_FLASH);
+ mutex_unlock(&chip->lock);
+}
+
+static void lm3642_strobe_brightness_set(struct led_classdev *cdev,
+ enum led_brightness brightness)
+{
+ struct lm3642_chip_data *chip =
+ container_of(cdev, struct lm3642_chip_data, cdev_flash);
+
+ chip->br_flash = brightness;
+ schedule_work(&chip->work_flash);
+}
+
+/* indicator */
+static void lm3642_deferred_indicator_brightness_set(struct work_struct *work)
+{
+ struct lm3642_chip_data *chip =
+ container_of(work, struct lm3642_chip_data, work_indicator);
+
+ mutex_lock(&chip->lock);
+ lm3642_control(chip, chip->br_indicator, MODES_INDIC);
+ mutex_unlock(&chip->lock);
+}
+
+static void lm3642_indicator_brightness_set(struct led_classdev *cdev,
+ enum led_brightness brightness)
+{
+ struct lm3642_chip_data *chip =
+ container_of(cdev, struct lm3642_chip_data, cdev_indicator);
+
+ chip->br_indicator = brightness;
+ schedule_work(&chip->work_indicator);
+}
+
+static const struct regmap_config lm3642_regmap = {
+ .reg_bits = 8,
+ .val_bits = 8,
+ .max_register = REG_MAX,
+};
+
+static struct attribute *lm3642_flash_attrs[] = {
+ &dev_attr_strobe_pin.attr,
+ NULL
+};
+ATTRIBUTE_GROUPS(lm3642_flash);
+
+static struct attribute *lm3642_torch_attrs[] = {
+ &dev_attr_torch_pin.attr,
+ NULL
+};
+ATTRIBUTE_GROUPS(lm3642_torch);
+
+static int lm3642_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct lm3642_platform_data *pdata = dev_get_platdata(&client->dev);
+ struct lm3642_chip_data *chip;
+
+ int err;
+
+ if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) {
+ dev_err(&client->dev, "i2c functionality check fail.\n");
+ return -EOPNOTSUPP;
+ }
+
+ if (pdata == NULL) {
+ dev_err(&client->dev, "needs Platform Data.\n");
+ return -ENODATA;
+ }
+
+ chip = devm_kzalloc(&client->dev,
+ sizeof(struct lm3642_chip_data), GFP_KERNEL);
+ if (!chip)
+ return -ENOMEM;
+
+ chip->dev = &client->dev;
+ chip->pdata = pdata;
+
+ chip->tx_pin = pdata->tx_pin;
+ chip->torch_pin = pdata->torch_pin;
+ chip->strobe_pin = pdata->strobe_pin;
+
+ chip->regmap = devm_regmap_init_i2c(client, &lm3642_regmap);
+ if (IS_ERR(chip->regmap)) {
+ err = PTR_ERR(chip->regmap);
+ dev_err(&client->dev, "Failed to allocate register map: %d\n",
+ err);
+ return err;
+ }
+
+ mutex_init(&chip->lock);
+ i2c_set_clientdata(client, chip);
+
+ err = lm3642_chip_init(chip);
+ if (err < 0)
+ goto err_out;
+
+ /* flash */
+ INIT_WORK(&chip->work_flash, lm3642_deferred_strobe_brightness_set);
+ chip->cdev_flash.name = "flash";
+ chip->cdev_flash.max_brightness = 16;
+ chip->cdev_flash.brightness_set = lm3642_strobe_brightness_set;
+ chip->cdev_flash.default_trigger = "flash";
+ chip->cdev_flash.groups = lm3642_flash_groups,
+ err = led_classdev_register((struct device *)
+ &client->dev, &chip->cdev_flash);
+ if (err < 0) {
+ dev_err(chip->dev, "failed to register flash\n");
+ goto err_out;
+ }
+
+ /* torch */
+ INIT_WORK(&chip->work_torch, lm3642_deferred_torch_brightness_set);
+ chip->cdev_torch.name = "torch";
+ chip->cdev_torch.max_brightness = 8;
+ chip->cdev_torch.brightness_set = lm3642_torch_brightness_set;
+ chip->cdev_torch.default_trigger = "torch";
+ chip->cdev_torch.groups = lm3642_torch_groups,
+ err = led_classdev_register((struct device *)
+ &client->dev, &chip->cdev_torch);
+ if (err < 0) {
+ dev_err(chip->dev, "failed to register torch\n");
+ goto err_create_torch_file;
+ }
+
+ /* indicator */
+ INIT_WORK(&chip->work_indicator,
+ lm3642_deferred_indicator_brightness_set);
+ chip->cdev_indicator.name = "indicator";
+ chip->cdev_indicator.max_brightness = 8;
+ chip->cdev_indicator.brightness_set = lm3642_indicator_brightness_set;
+ err = led_classdev_register((struct device *)
+ &client->dev, &chip->cdev_indicator);
+ if (err < 0) {
+ dev_err(chip->dev, "failed to register indicator\n");
+ goto err_create_indicator_file;
+ }
+
+ dev_info(&client->dev, "LM3642 is initialized\n");
+ return 0;
+
+err_create_indicator_file:
+ led_classdev_unregister(&chip->cdev_torch);
+err_create_torch_file:
+ led_classdev_unregister(&chip->cdev_flash);
+err_out:
+ return err;
+}
+
+static int lm3642_remove(struct i2c_client *client)
+{
+ struct lm3642_chip_data *chip = i2c_get_clientdata(client);
+
+ led_classdev_unregister(&chip->cdev_indicator);
+ flush_work(&chip->work_indicator);
+ led_classdev_unregister(&chip->cdev_torch);
+ flush_work(&chip->work_torch);
+ led_classdev_unregister(&chip->cdev_flash);
+ flush_work(&chip->work_flash);
+ regmap_write(chip->regmap, REG_ENABLE, 0);
+ return 0;
+}
+
+static const struct i2c_device_id lm3642_id[] = {
+ {LM3642_NAME, 0},
+ {}
+};
+
+MODULE_DEVICE_TABLE(i2c, lm3642_id);
+
+static struct i2c_driver lm3642_i2c_driver = {
+ .driver = {
+ .name = LM3642_NAME,
+ .owner = THIS_MODULE,
+ .pm = NULL,
+ },
+ .probe = lm3642_probe,
+ .remove = lm3642_remove,
+ .id_table = lm3642_id,
+};
+
+module_i2c_driver(lm3642_i2c_driver);
+
+MODULE_DESCRIPTION("Texas Instruments Flash Lighting driver for LM3642");
+MODULE_AUTHOR("Daniel Jeong <daniel.jeong@ti.com>");
+MODULE_AUTHOR("G.Shark Jeong <gshark.jeong@gmail.com>");
+MODULE_LICENSE("GPL v2");
diff --git a/kernel/drivers/leds/leds-locomo.c b/kernel/drivers/leds/leds-locomo.c
new file mode 100644
index 000000000..80ba04888
--- /dev/null
+++ b/kernel/drivers/leds/leds-locomo.c
@@ -0,0 +1,97 @@
+/*
+ * linux/drivers/leds/leds-locomo.c
+ *
+ * Copyright (C) 2005 John Lenz <lenz@cs.wisc.edu>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/leds.h>
+
+#include <mach/hardware.h>
+#include <asm/hardware/locomo.h>
+
+static void locomoled_brightness_set(struct led_classdev *led_cdev,
+ enum led_brightness value, int offset)
+{
+ struct locomo_dev *locomo_dev = LOCOMO_DEV(led_cdev->dev->parent);
+ unsigned long flags;
+
+ local_irq_save(flags);
+ if (value)
+ locomo_writel(LOCOMO_LPT_TOFH, locomo_dev->mapbase + offset);
+ else
+ locomo_writel(LOCOMO_LPT_TOFL, locomo_dev->mapbase + offset);
+ local_irq_restore(flags);
+}
+
+static void locomoled_brightness_set0(struct led_classdev *led_cdev,
+ enum led_brightness value)
+{
+ locomoled_brightness_set(led_cdev, value, LOCOMO_LPT0);
+}
+
+static void locomoled_brightness_set1(struct led_classdev *led_cdev,
+ enum led_brightness value)
+{
+ locomoled_brightness_set(led_cdev, value, LOCOMO_LPT1);
+}
+
+static struct led_classdev locomo_led0 = {
+ .name = "locomo:amber:charge",
+ .default_trigger = "main-battery-charging",
+ .brightness_set = locomoled_brightness_set0,
+};
+
+static struct led_classdev locomo_led1 = {
+ .name = "locomo:green:mail",
+ .default_trigger = "nand-disk",
+ .brightness_set = locomoled_brightness_set1,
+};
+
+static int locomoled_probe(struct locomo_dev *ldev)
+{
+ int ret;
+
+ ret = led_classdev_register(&ldev->dev, &locomo_led0);
+ if (ret < 0)
+ return ret;
+
+ ret = led_classdev_register(&ldev->dev, &locomo_led1);
+ if (ret < 0)
+ led_classdev_unregister(&locomo_led0);
+
+ return ret;
+}
+
+static int locomoled_remove(struct locomo_dev *dev)
+{
+ led_classdev_unregister(&locomo_led0);
+ led_classdev_unregister(&locomo_led1);
+ return 0;
+}
+
+static struct locomo_driver locomoled_driver = {
+ .drv = {
+ .name = "locomoled"
+ },
+ .devid = LOCOMO_DEVID_LED,
+ .probe = locomoled_probe,
+ .remove = locomoled_remove,
+};
+
+static int __init locomoled_init(void)
+{
+ return locomo_driver_register(&locomoled_driver);
+}
+module_init(locomoled_init);
+
+MODULE_AUTHOR("John Lenz <lenz@cs.wisc.edu>");
+MODULE_DESCRIPTION("Locomo LED driver");
+MODULE_LICENSE("GPL");
diff --git a/kernel/drivers/leds/leds-lp3944.c b/kernel/drivers/leds/leds-lp3944.c
new file mode 100644
index 000000000..53144fb96
--- /dev/null
+++ b/kernel/drivers/leds/leds-lp3944.c
@@ -0,0 +1,459 @@
+/*
+ * leds-lp3944.c - driver for National Semiconductor LP3944 Funlight Chip
+ *
+ * Copyright (C) 2009 Antonio Ospite <ospite@studenti.unina.it>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+/*
+ * I2C driver for National Semiconductor LP3944 Funlight Chip
+ * http://www.national.com/pf/LP/LP3944.html
+ *
+ * This helper chip can drive up to 8 leds, with two programmable DIM modes;
+ * it could even be used as a gpio expander but this driver assumes it is used
+ * as a led controller.
+ *
+ * The DIM modes are used to set _blink_ patterns for leds, the pattern is
+ * specified supplying two parameters:
+ * - period: from 0s to 1.6s
+ * - duty cycle: percentage of the period the led is on, from 0 to 100
+ *
+ * LP3944 can be found on Motorola A910 smartphone, where it drives the rgb
+ * leds, the camera flash light and the displays backlights.
+ */
+
+#include <linux/module.h>
+#include <linux/i2c.h>
+#include <linux/slab.h>
+#include <linux/leds.h>
+#include <linux/mutex.h>
+#include <linux/workqueue.h>
+#include <linux/leds-lp3944.h>
+
+/* Read Only Registers */
+#define LP3944_REG_INPUT1 0x00 /* LEDs 0-7 InputRegister (Read Only) */
+#define LP3944_REG_REGISTER1 0x01 /* None (Read Only) */
+
+#define LP3944_REG_PSC0 0x02 /* Frequency Prescaler 0 (R/W) */
+#define LP3944_REG_PWM0 0x03 /* PWM Register 0 (R/W) */
+#define LP3944_REG_PSC1 0x04 /* Frequency Prescaler 1 (R/W) */
+#define LP3944_REG_PWM1 0x05 /* PWM Register 1 (R/W) */
+#define LP3944_REG_LS0 0x06 /* LEDs 0-3 Selector (R/W) */
+#define LP3944_REG_LS1 0x07 /* LEDs 4-7 Selector (R/W) */
+
+/* These registers are not used to control leds in LP3944, they can store
+ * arbitrary values which the chip will ignore.
+ */
+#define LP3944_REG_REGISTER8 0x08
+#define LP3944_REG_REGISTER9 0x09
+
+#define LP3944_DIM0 0
+#define LP3944_DIM1 1
+
+/* period in ms */
+#define LP3944_PERIOD_MIN 0
+#define LP3944_PERIOD_MAX 1600
+
+/* duty cycle is a percentage */
+#define LP3944_DUTY_CYCLE_MIN 0
+#define LP3944_DUTY_CYCLE_MAX 100
+
+#define ldev_to_led(c) container_of(c, struct lp3944_led_data, ldev)
+
+/* Saved data */
+struct lp3944_led_data {
+ u8 id;
+ enum lp3944_type type;
+ enum lp3944_status status;
+ struct led_classdev ldev;
+ struct i2c_client *client;
+ struct work_struct work;
+};
+
+struct lp3944_data {
+ struct mutex lock;
+ struct i2c_client *client;
+ struct lp3944_led_data leds[LP3944_LEDS_MAX];
+};
+
+static int lp3944_reg_read(struct i2c_client *client, u8 reg, u8 *value)
+{
+ int tmp;
+
+ tmp = i2c_smbus_read_byte_data(client, reg);
+ if (tmp < 0)
+ return tmp;
+
+ *value = tmp;
+
+ return 0;
+}
+
+static int lp3944_reg_write(struct i2c_client *client, u8 reg, u8 value)
+{
+ return i2c_smbus_write_byte_data(client, reg, value);
+}
+
+/**
+ * Set the period for DIM status
+ *
+ * @client: the i2c client
+ * @dim: either LP3944_DIM0 or LP3944_DIM1
+ * @period: period of a blink, that is a on/off cycle, expressed in ms.
+ */
+static int lp3944_dim_set_period(struct i2c_client *client, u8 dim, u16 period)
+{
+ u8 psc_reg;
+ u8 psc_value;
+ int err;
+
+ if (dim == LP3944_DIM0)
+ psc_reg = LP3944_REG_PSC0;
+ else if (dim == LP3944_DIM1)
+ psc_reg = LP3944_REG_PSC1;
+ else
+ return -EINVAL;
+
+ /* Convert period to Prescaler value */
+ if (period > LP3944_PERIOD_MAX)
+ return -EINVAL;
+
+ psc_value = (period * 255) / LP3944_PERIOD_MAX;
+
+ err = lp3944_reg_write(client, psc_reg, psc_value);
+
+ return err;
+}
+
+/**
+ * Set the duty cycle for DIM status
+ *
+ * @client: the i2c client
+ * @dim: either LP3944_DIM0 or LP3944_DIM1
+ * @duty_cycle: percentage of a period during which a led is ON
+ */
+static int lp3944_dim_set_dutycycle(struct i2c_client *client, u8 dim,
+ u8 duty_cycle)
+{
+ u8 pwm_reg;
+ u8 pwm_value;
+ int err;
+
+ if (dim == LP3944_DIM0)
+ pwm_reg = LP3944_REG_PWM0;
+ else if (dim == LP3944_DIM1)
+ pwm_reg = LP3944_REG_PWM1;
+ else
+ return -EINVAL;
+
+ /* Convert duty cycle to PWM value */
+ if (duty_cycle > LP3944_DUTY_CYCLE_MAX)
+ return -EINVAL;
+
+ pwm_value = (duty_cycle * 255) / LP3944_DUTY_CYCLE_MAX;
+
+ err = lp3944_reg_write(client, pwm_reg, pwm_value);
+
+ return err;
+}
+
+/**
+ * Set the led status
+ *
+ * @led: a lp3944_led_data structure
+ * @status: one of LP3944_LED_STATUS_OFF
+ * LP3944_LED_STATUS_ON
+ * LP3944_LED_STATUS_DIM0
+ * LP3944_LED_STATUS_DIM1
+ */
+static int lp3944_led_set(struct lp3944_led_data *led, u8 status)
+{
+ struct lp3944_data *data = i2c_get_clientdata(led->client);
+ u8 id = led->id;
+ u8 reg;
+ u8 val = 0;
+ int err;
+
+ dev_dbg(&led->client->dev, "%s: %s, status before normalization:%d\n",
+ __func__, led->ldev.name, status);
+
+ switch (id) {
+ case LP3944_LED0:
+ case LP3944_LED1:
+ case LP3944_LED2:
+ case LP3944_LED3:
+ reg = LP3944_REG_LS0;
+ break;
+ case LP3944_LED4:
+ case LP3944_LED5:
+ case LP3944_LED6:
+ case LP3944_LED7:
+ id -= LP3944_LED4;
+ reg = LP3944_REG_LS1;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ if (status > LP3944_LED_STATUS_DIM1)
+ return -EINVAL;
+
+ /* invert only 0 and 1, leave unchanged the other values,
+ * remember we are abusing status to set blink patterns
+ */
+ if (led->type == LP3944_LED_TYPE_LED_INVERTED && status < 2)
+ status = 1 - status;
+
+ mutex_lock(&data->lock);
+ lp3944_reg_read(led->client, reg, &val);
+
+ val &= ~(LP3944_LED_STATUS_MASK << (id << 1));
+ val |= (status << (id << 1));
+
+ dev_dbg(&led->client->dev, "%s: %s, reg:%d id:%d status:%d val:%#x\n",
+ __func__, led->ldev.name, reg, id, status, val);
+
+ /* set led status */
+ err = lp3944_reg_write(led->client, reg, val);
+ mutex_unlock(&data->lock);
+
+ return err;
+}
+
+static int lp3944_led_set_blink(struct led_classdev *led_cdev,
+ unsigned long *delay_on,
+ unsigned long *delay_off)
+{
+ struct lp3944_led_data *led = ldev_to_led(led_cdev);
+ u16 period;
+ u8 duty_cycle;
+ int err;
+
+ /* units are in ms */
+ if (*delay_on + *delay_off > LP3944_PERIOD_MAX)
+ return -EINVAL;
+
+ if (*delay_on == 0 && *delay_off == 0) {
+ /* Special case: the leds subsystem requires a default user
+ * friendly blink pattern for the LED. Let's blink the led
+ * slowly (1Hz).
+ */
+ *delay_on = 500;
+ *delay_off = 500;
+ }
+
+ period = (*delay_on) + (*delay_off);
+
+ /* duty_cycle is the percentage of period during which the led is ON */
+ duty_cycle = 100 * (*delay_on) / period;
+
+ /* invert duty cycle for inverted leds, this has the same effect of
+ * swapping delay_on and delay_off
+ */
+ if (led->type == LP3944_LED_TYPE_LED_INVERTED)
+ duty_cycle = 100 - duty_cycle;
+
+ /* NOTE: using always the first DIM mode, this means that all leds
+ * will have the same blinking pattern.
+ *
+ * We could find a way later to have two leds blinking in hardware
+ * with different patterns at the same time, falling back to software
+ * control for the other ones.
+ */
+ err = lp3944_dim_set_period(led->client, LP3944_DIM0, period);
+ if (err)
+ return err;
+
+ err = lp3944_dim_set_dutycycle(led->client, LP3944_DIM0, duty_cycle);
+ if (err)
+ return err;
+
+ dev_dbg(&led->client->dev, "%s: OK hardware accelerated blink!\n",
+ __func__);
+
+ led->status = LP3944_LED_STATUS_DIM0;
+ schedule_work(&led->work);
+
+ return 0;
+}
+
+static void lp3944_led_set_brightness(struct led_classdev *led_cdev,
+ enum led_brightness brightness)
+{
+ struct lp3944_led_data *led = ldev_to_led(led_cdev);
+
+ dev_dbg(&led->client->dev, "%s: %s, %d\n",
+ __func__, led_cdev->name, brightness);
+
+ led->status = !!brightness;
+ schedule_work(&led->work);
+}
+
+static void lp3944_led_work(struct work_struct *work)
+{
+ struct lp3944_led_data *led;
+
+ led = container_of(work, struct lp3944_led_data, work);
+ lp3944_led_set(led, led->status);
+}
+
+static int lp3944_configure(struct i2c_client *client,
+ struct lp3944_data *data,
+ struct lp3944_platform_data *pdata)
+{
+ int i, err = 0;
+
+ for (i = 0; i < pdata->leds_size; i++) {
+ struct lp3944_led *pled = &pdata->leds[i];
+ struct lp3944_led_data *led = &data->leds[i];
+ led->client = client;
+ led->id = i;
+
+ switch (pled->type) {
+
+ case LP3944_LED_TYPE_LED:
+ case LP3944_LED_TYPE_LED_INVERTED:
+ led->type = pled->type;
+ led->status = pled->status;
+ led->ldev.name = pled->name;
+ led->ldev.max_brightness = 1;
+ led->ldev.brightness_set = lp3944_led_set_brightness;
+ led->ldev.blink_set = lp3944_led_set_blink;
+ led->ldev.flags = LED_CORE_SUSPENDRESUME;
+
+ INIT_WORK(&led->work, lp3944_led_work);
+ err = led_classdev_register(&client->dev, &led->ldev);
+ if (err < 0) {
+ dev_err(&client->dev,
+ "couldn't register LED %s\n",
+ led->ldev.name);
+ goto exit;
+ }
+
+ /* to expose the default value to userspace */
+ led->ldev.brightness =
+ (enum led_brightness) led->status;
+
+ /* Set the default led status */
+ err = lp3944_led_set(led, led->status);
+ if (err < 0) {
+ dev_err(&client->dev,
+ "%s couldn't set STATUS %d\n",
+ led->ldev.name, led->status);
+ goto exit;
+ }
+ break;
+
+ case LP3944_LED_TYPE_NONE:
+ default:
+ break;
+
+ }
+ }
+ return 0;
+
+exit:
+ if (i > 0)
+ for (i = i - 1; i >= 0; i--)
+ switch (pdata->leds[i].type) {
+
+ case LP3944_LED_TYPE_LED:
+ case LP3944_LED_TYPE_LED_INVERTED:
+ led_classdev_unregister(&data->leds[i].ldev);
+ cancel_work_sync(&data->leds[i].work);
+ break;
+
+ case LP3944_LED_TYPE_NONE:
+ default:
+ break;
+ }
+
+ return err;
+}
+
+static int lp3944_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct lp3944_platform_data *lp3944_pdata =
+ dev_get_platdata(&client->dev);
+ struct lp3944_data *data;
+ int err;
+
+ if (lp3944_pdata == NULL) {
+ dev_err(&client->dev, "no platform data\n");
+ return -EINVAL;
+ }
+
+ /* Let's see whether this adapter can support what we need. */
+ if (!i2c_check_functionality(client->adapter,
+ I2C_FUNC_SMBUS_BYTE_DATA)) {
+ dev_err(&client->dev, "insufficient functionality!\n");
+ return -ENODEV;
+ }
+
+ data = devm_kzalloc(&client->dev, sizeof(struct lp3944_data),
+ GFP_KERNEL);
+ if (!data)
+ return -ENOMEM;
+
+ data->client = client;
+ i2c_set_clientdata(client, data);
+
+ mutex_init(&data->lock);
+
+ err = lp3944_configure(client, data, lp3944_pdata);
+ if (err < 0)
+ return err;
+
+ dev_info(&client->dev, "lp3944 enabled\n");
+ return 0;
+}
+
+static int lp3944_remove(struct i2c_client *client)
+{
+ struct lp3944_platform_data *pdata = dev_get_platdata(&client->dev);
+ struct lp3944_data *data = i2c_get_clientdata(client);
+ int i;
+
+ for (i = 0; i < pdata->leds_size; i++)
+ switch (data->leds[i].type) {
+ case LP3944_LED_TYPE_LED:
+ case LP3944_LED_TYPE_LED_INVERTED:
+ led_classdev_unregister(&data->leds[i].ldev);
+ cancel_work_sync(&data->leds[i].work);
+ break;
+
+ case LP3944_LED_TYPE_NONE:
+ default:
+ break;
+ }
+
+ return 0;
+}
+
+/* lp3944 i2c driver struct */
+static const struct i2c_device_id lp3944_id[] = {
+ {"lp3944", 0},
+ {}
+};
+
+MODULE_DEVICE_TABLE(i2c, lp3944_id);
+
+static struct i2c_driver lp3944_driver = {
+ .driver = {
+ .name = "lp3944",
+ },
+ .probe = lp3944_probe,
+ .remove = lp3944_remove,
+ .id_table = lp3944_id,
+};
+
+module_i2c_driver(lp3944_driver);
+
+MODULE_AUTHOR("Antonio Ospite <ospite@studenti.unina.it>");
+MODULE_DESCRIPTION("LP3944 Fun Light Chip");
+MODULE_LICENSE("GPL");
diff --git a/kernel/drivers/leds/leds-lp5521.c b/kernel/drivers/leds/leds-lp5521.c
new file mode 100644
index 000000000..8ca197af2
--- /dev/null
+++ b/kernel/drivers/leds/leds-lp5521.c
@@ -0,0 +1,617 @@
+/*
+ * LP5521 LED chip driver.
+ *
+ * Copyright (C) 2010 Nokia Corporation
+ * Copyright (C) 2012 Texas Instruments
+ *
+ * Contact: Samu Onkalo <samu.p.onkalo@nokia.com>
+ * Milo(Woogyom) Kim <milo.kim@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ */
+
+#include <linux/delay.h>
+#include <linux/firmware.h>
+#include <linux/i2c.h>
+#include <linux/leds.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/platform_data/leds-lp55xx.h>
+#include <linux/slab.h>
+#include <linux/of.h>
+
+#include "leds-lp55xx-common.h"
+
+#define LP5521_PROGRAM_LENGTH 32
+#define LP5521_MAX_LEDS 3
+#define LP5521_CMD_DIRECT 0x3F
+
+/* Registers */
+#define LP5521_REG_ENABLE 0x00
+#define LP5521_REG_OP_MODE 0x01
+#define LP5521_REG_R_PWM 0x02
+#define LP5521_REG_G_PWM 0x03
+#define LP5521_REG_B_PWM 0x04
+#define LP5521_REG_R_CURRENT 0x05
+#define LP5521_REG_G_CURRENT 0x06
+#define LP5521_REG_B_CURRENT 0x07
+#define LP5521_REG_CONFIG 0x08
+#define LP5521_REG_STATUS 0x0C
+#define LP5521_REG_RESET 0x0D
+#define LP5521_REG_R_PROG_MEM 0x10
+#define LP5521_REG_G_PROG_MEM 0x30
+#define LP5521_REG_B_PROG_MEM 0x50
+
+/* Base register to set LED current */
+#define LP5521_REG_LED_CURRENT_BASE LP5521_REG_R_CURRENT
+/* Base register to set the brightness */
+#define LP5521_REG_LED_PWM_BASE LP5521_REG_R_PWM
+
+/* Bits in ENABLE register */
+#define LP5521_MASTER_ENABLE 0x40 /* Chip master enable */
+#define LP5521_LOGARITHMIC_PWM 0x80 /* Logarithmic PWM adjustment */
+#define LP5521_EXEC_RUN 0x2A
+#define LP5521_ENABLE_DEFAULT \
+ (LP5521_MASTER_ENABLE | LP5521_LOGARITHMIC_PWM)
+#define LP5521_ENABLE_RUN_PROGRAM \
+ (LP5521_ENABLE_DEFAULT | LP5521_EXEC_RUN)
+
+/* CONFIG register */
+#define LP5521_PWM_HF 0x40 /* PWM: 0 = 256Hz, 1 = 558Hz */
+#define LP5521_PWRSAVE_EN 0x20 /* 1 = Power save mode */
+#define LP5521_CP_MODE_OFF 0 /* Charge pump (CP) off */
+#define LP5521_CP_MODE_BYPASS 8 /* CP forced to bypass mode */
+#define LP5521_CP_MODE_1X5 0x10 /* CP forced to 1.5x mode */
+#define LP5521_CP_MODE_AUTO 0x18 /* Automatic mode selection */
+#define LP5521_R_TO_BATT 0x04 /* R out: 0 = CP, 1 = Vbat */
+#define LP5521_CLK_INT 0x01 /* Internal clock */
+#define LP5521_DEFAULT_CFG \
+ (LP5521_PWM_HF | LP5521_PWRSAVE_EN | LP5521_CP_MODE_AUTO)
+
+/* Status */
+#define LP5521_EXT_CLK_USED 0x08
+
+/* default R channel current register value */
+#define LP5521_REG_R_CURR_DEFAULT 0xAF
+
+/* Reset register value */
+#define LP5521_RESET 0xFF
+
+/* Program Memory Operations */
+#define LP5521_MODE_R_M 0x30 /* Operation Mode Register */
+#define LP5521_MODE_G_M 0x0C
+#define LP5521_MODE_B_M 0x03
+#define LP5521_LOAD_R 0x10
+#define LP5521_LOAD_G 0x04
+#define LP5521_LOAD_B 0x01
+
+#define LP5521_R_IS_LOADING(mode) \
+ ((mode & LP5521_MODE_R_M) == LP5521_LOAD_R)
+#define LP5521_G_IS_LOADING(mode) \
+ ((mode & LP5521_MODE_G_M) == LP5521_LOAD_G)
+#define LP5521_B_IS_LOADING(mode) \
+ ((mode & LP5521_MODE_B_M) == LP5521_LOAD_B)
+
+#define LP5521_EXEC_R_M 0x30 /* Enable Register */
+#define LP5521_EXEC_G_M 0x0C
+#define LP5521_EXEC_B_M 0x03
+#define LP5521_EXEC_M 0x3F
+#define LP5521_RUN_R 0x20
+#define LP5521_RUN_G 0x08
+#define LP5521_RUN_B 0x02
+
+static inline void lp5521_wait_opmode_done(void)
+{
+ /* operation mode change needs to be longer than 153 us */
+ usleep_range(200, 300);
+}
+
+static inline void lp5521_wait_enable_done(void)
+{
+ /* it takes more 488 us to update ENABLE register */
+ usleep_range(500, 600);
+}
+
+static void lp5521_set_led_current(struct lp55xx_led *led, u8 led_current)
+{
+ led->led_current = led_current;
+ lp55xx_write(led->chip, LP5521_REG_LED_CURRENT_BASE + led->chan_nr,
+ led_current);
+}
+
+static void lp5521_load_engine(struct lp55xx_chip *chip)
+{
+ enum lp55xx_engine_index idx = chip->engine_idx;
+ u8 mask[] = {
+ [LP55XX_ENGINE_1] = LP5521_MODE_R_M,
+ [LP55XX_ENGINE_2] = LP5521_MODE_G_M,
+ [LP55XX_ENGINE_3] = LP5521_MODE_B_M,
+ };
+
+ u8 val[] = {
+ [LP55XX_ENGINE_1] = LP5521_LOAD_R,
+ [LP55XX_ENGINE_2] = LP5521_LOAD_G,
+ [LP55XX_ENGINE_3] = LP5521_LOAD_B,
+ };
+
+ lp55xx_update_bits(chip, LP5521_REG_OP_MODE, mask[idx], val[idx]);
+
+ lp5521_wait_opmode_done();
+}
+
+static void lp5521_stop_all_engines(struct lp55xx_chip *chip)
+{
+ lp55xx_write(chip, LP5521_REG_OP_MODE, 0);
+ lp5521_wait_opmode_done();
+}
+
+static void lp5521_stop_engine(struct lp55xx_chip *chip)
+{
+ enum lp55xx_engine_index idx = chip->engine_idx;
+ u8 mask[] = {
+ [LP55XX_ENGINE_1] = LP5521_MODE_R_M,
+ [LP55XX_ENGINE_2] = LP5521_MODE_G_M,
+ [LP55XX_ENGINE_3] = LP5521_MODE_B_M,
+ };
+
+ lp55xx_update_bits(chip, LP5521_REG_OP_MODE, mask[idx], 0);
+
+ lp5521_wait_opmode_done();
+}
+
+static void lp5521_run_engine(struct lp55xx_chip *chip, bool start)
+{
+ int ret;
+ u8 mode;
+ u8 exec;
+
+ /* stop engine */
+ if (!start) {
+ lp5521_stop_engine(chip);
+ lp55xx_write(chip, LP5521_REG_OP_MODE, LP5521_CMD_DIRECT);
+ lp5521_wait_opmode_done();
+ return;
+ }
+
+ /*
+ * To run the engine,
+ * operation mode and enable register should updated at the same time
+ */
+
+ ret = lp55xx_read(chip, LP5521_REG_OP_MODE, &mode);
+ if (ret)
+ return;
+
+ ret = lp55xx_read(chip, LP5521_REG_ENABLE, &exec);
+ if (ret)
+ return;
+
+ /* change operation mode to RUN only when each engine is loading */
+ if (LP5521_R_IS_LOADING(mode)) {
+ mode = (mode & ~LP5521_MODE_R_M) | LP5521_RUN_R;
+ exec = (exec & ~LP5521_EXEC_R_M) | LP5521_RUN_R;
+ }
+
+ if (LP5521_G_IS_LOADING(mode)) {
+ mode = (mode & ~LP5521_MODE_G_M) | LP5521_RUN_G;
+ exec = (exec & ~LP5521_EXEC_G_M) | LP5521_RUN_G;
+ }
+
+ if (LP5521_B_IS_LOADING(mode)) {
+ mode = (mode & ~LP5521_MODE_B_M) | LP5521_RUN_B;
+ exec = (exec & ~LP5521_EXEC_B_M) | LP5521_RUN_B;
+ }
+
+ lp55xx_write(chip, LP5521_REG_OP_MODE, mode);
+ lp5521_wait_opmode_done();
+
+ lp55xx_update_bits(chip, LP5521_REG_ENABLE, LP5521_EXEC_M, exec);
+ lp5521_wait_enable_done();
+}
+
+static int lp5521_update_program_memory(struct lp55xx_chip *chip,
+ const u8 *data, size_t size)
+{
+ enum lp55xx_engine_index idx = chip->engine_idx;
+ u8 pattern[LP5521_PROGRAM_LENGTH] = {0};
+ u8 addr[] = {
+ [LP55XX_ENGINE_1] = LP5521_REG_R_PROG_MEM,
+ [LP55XX_ENGINE_2] = LP5521_REG_G_PROG_MEM,
+ [LP55XX_ENGINE_3] = LP5521_REG_B_PROG_MEM,
+ };
+ unsigned cmd;
+ char c[3];
+ int nrchars;
+ int ret;
+ int offset = 0;
+ int i = 0;
+
+ while ((offset < size - 1) && (i < LP5521_PROGRAM_LENGTH)) {
+ /* separate sscanfs because length is working only for %s */
+ ret = sscanf(data + offset, "%2s%n ", c, &nrchars);
+ if (ret != 1)
+ goto err;
+
+ ret = sscanf(c, "%2x", &cmd);
+ if (ret != 1)
+ goto err;
+
+ pattern[i] = (u8)cmd;
+ offset += nrchars;
+ i++;
+ }
+
+ /* Each instruction is 16bit long. Check that length is even */
+ if (i % 2)
+ goto err;
+
+ for (i = 0; i < LP5521_PROGRAM_LENGTH; i++) {
+ ret = lp55xx_write(chip, addr[idx] + i, pattern[i]);
+ if (ret)
+ return -EINVAL;
+ }
+
+ return size;
+
+err:
+ dev_err(&chip->cl->dev, "wrong pattern format\n");
+ return -EINVAL;
+}
+
+static void lp5521_firmware_loaded(struct lp55xx_chip *chip)
+{
+ const struct firmware *fw = chip->fw;
+
+ if (fw->size > LP5521_PROGRAM_LENGTH) {
+ dev_err(&chip->cl->dev, "firmware data size overflow: %zu\n",
+ fw->size);
+ return;
+ }
+
+ /*
+ * Program momery sequence
+ * 1) set engine mode to "LOAD"
+ * 2) write firmware data into program memory
+ */
+
+ lp5521_load_engine(chip);
+ lp5521_update_program_memory(chip, fw->data, fw->size);
+}
+
+static int lp5521_post_init_device(struct lp55xx_chip *chip)
+{
+ int ret;
+ u8 val;
+
+ /*
+ * Make sure that the chip is reset by reading back the r channel
+ * current reg. This is dummy read is required on some platforms -
+ * otherwise further access to the R G B channels in the
+ * LP5521_REG_ENABLE register will not have any effect - strange!
+ */
+ ret = lp55xx_read(chip, LP5521_REG_R_CURRENT, &val);
+ if (ret) {
+ dev_err(&chip->cl->dev, "error in resetting chip\n");
+ return ret;
+ }
+ if (val != LP5521_REG_R_CURR_DEFAULT) {
+ dev_err(&chip->cl->dev,
+ "unexpected data in register (expected 0x%x got 0x%x)\n",
+ LP5521_REG_R_CURR_DEFAULT, val);
+ ret = -EINVAL;
+ return ret;
+ }
+ usleep_range(10000, 20000);
+
+ /* Set all PWMs to direct control mode */
+ ret = lp55xx_write(chip, LP5521_REG_OP_MODE, LP5521_CMD_DIRECT);
+
+ /* Update configuration for the clock setting */
+ val = LP5521_DEFAULT_CFG;
+ if (!lp55xx_is_extclk_used(chip))
+ val |= LP5521_CLK_INT;
+
+ ret = lp55xx_write(chip, LP5521_REG_CONFIG, val);
+ if (ret)
+ return ret;
+
+ /* Initialize all channels PWM to zero -> leds off */
+ lp55xx_write(chip, LP5521_REG_R_PWM, 0);
+ lp55xx_write(chip, LP5521_REG_G_PWM, 0);
+ lp55xx_write(chip, LP5521_REG_B_PWM, 0);
+
+ /* Set engines are set to run state when OP_MODE enables engines */
+ ret = lp55xx_write(chip, LP5521_REG_ENABLE, LP5521_ENABLE_RUN_PROGRAM);
+ if (ret)
+ return ret;
+
+ lp5521_wait_enable_done();
+
+ return 0;
+}
+
+static int lp5521_run_selftest(struct lp55xx_chip *chip, char *buf)
+{
+ struct lp55xx_platform_data *pdata = chip->pdata;
+ int ret;
+ u8 status;
+
+ ret = lp55xx_read(chip, LP5521_REG_STATUS, &status);
+ if (ret < 0)
+ return ret;
+
+ if (pdata->clock_mode != LP55XX_CLOCK_EXT)
+ return 0;
+
+ /* Check that ext clock is really in use if requested */
+ if ((status & LP5521_EXT_CLK_USED) == 0)
+ return -EIO;
+
+ return 0;
+}
+
+static void lp5521_led_brightness_work(struct work_struct *work)
+{
+ struct lp55xx_led *led = container_of(work, struct lp55xx_led,
+ brightness_work);
+ struct lp55xx_chip *chip = led->chip;
+
+ mutex_lock(&chip->lock);
+ lp55xx_write(chip, LP5521_REG_LED_PWM_BASE + led->chan_nr,
+ led->brightness);
+ mutex_unlock(&chip->lock);
+}
+
+static ssize_t show_engine_mode(struct device *dev,
+ struct device_attribute *attr,
+ char *buf, int nr)
+{
+ struct lp55xx_led *led = i2c_get_clientdata(to_i2c_client(dev));
+ struct lp55xx_chip *chip = led->chip;
+ enum lp55xx_engine_mode mode = chip->engines[nr - 1].mode;
+
+ switch (mode) {
+ case LP55XX_ENGINE_RUN:
+ return sprintf(buf, "run\n");
+ case LP55XX_ENGINE_LOAD:
+ return sprintf(buf, "load\n");
+ case LP55XX_ENGINE_DISABLED:
+ default:
+ return sprintf(buf, "disabled\n");
+ }
+}
+show_mode(1)
+show_mode(2)
+show_mode(3)
+
+static ssize_t store_engine_mode(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t len, int nr)
+{
+ struct lp55xx_led *led = i2c_get_clientdata(to_i2c_client(dev));
+ struct lp55xx_chip *chip = led->chip;
+ struct lp55xx_engine *engine = &chip->engines[nr - 1];
+
+ mutex_lock(&chip->lock);
+
+ chip->engine_idx = nr;
+
+ if (!strncmp(buf, "run", 3)) {
+ lp5521_run_engine(chip, true);
+ engine->mode = LP55XX_ENGINE_RUN;
+ } else if (!strncmp(buf, "load", 4)) {
+ lp5521_stop_engine(chip);
+ lp5521_load_engine(chip);
+ engine->mode = LP55XX_ENGINE_LOAD;
+ } else if (!strncmp(buf, "disabled", 8)) {
+ lp5521_stop_engine(chip);
+ engine->mode = LP55XX_ENGINE_DISABLED;
+ }
+
+ mutex_unlock(&chip->lock);
+
+ return len;
+}
+store_mode(1)
+store_mode(2)
+store_mode(3)
+
+static ssize_t store_engine_load(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t len, int nr)
+{
+ struct lp55xx_led *led = i2c_get_clientdata(to_i2c_client(dev));
+ struct lp55xx_chip *chip = led->chip;
+ int ret;
+
+ mutex_lock(&chip->lock);
+
+ chip->engine_idx = nr;
+ lp5521_load_engine(chip);
+ ret = lp5521_update_program_memory(chip, buf, len);
+
+ mutex_unlock(&chip->lock);
+
+ return ret;
+}
+store_load(1)
+store_load(2)
+store_load(3)
+
+static ssize_t lp5521_selftest(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct lp55xx_led *led = i2c_get_clientdata(to_i2c_client(dev));
+ struct lp55xx_chip *chip = led->chip;
+ int ret;
+
+ mutex_lock(&chip->lock);
+ ret = lp5521_run_selftest(chip, buf);
+ mutex_unlock(&chip->lock);
+
+ return scnprintf(buf, PAGE_SIZE, "%s\n", ret ? "FAIL" : "OK");
+}
+
+/* device attributes */
+static LP55XX_DEV_ATTR_RW(engine1_mode, show_engine1_mode, store_engine1_mode);
+static LP55XX_DEV_ATTR_RW(engine2_mode, show_engine2_mode, store_engine2_mode);
+static LP55XX_DEV_ATTR_RW(engine3_mode, show_engine3_mode, store_engine3_mode);
+static LP55XX_DEV_ATTR_WO(engine1_load, store_engine1_load);
+static LP55XX_DEV_ATTR_WO(engine2_load, store_engine2_load);
+static LP55XX_DEV_ATTR_WO(engine3_load, store_engine3_load);
+static LP55XX_DEV_ATTR_RO(selftest, lp5521_selftest);
+
+static struct attribute *lp5521_attributes[] = {
+ &dev_attr_engine1_mode.attr,
+ &dev_attr_engine2_mode.attr,
+ &dev_attr_engine3_mode.attr,
+ &dev_attr_engine1_load.attr,
+ &dev_attr_engine2_load.attr,
+ &dev_attr_engine3_load.attr,
+ &dev_attr_selftest.attr,
+ NULL
+};
+
+static const struct attribute_group lp5521_group = {
+ .attrs = lp5521_attributes,
+};
+
+/* Chip specific configurations */
+static struct lp55xx_device_config lp5521_cfg = {
+ .reset = {
+ .addr = LP5521_REG_RESET,
+ .val = LP5521_RESET,
+ },
+ .enable = {
+ .addr = LP5521_REG_ENABLE,
+ .val = LP5521_ENABLE_DEFAULT,
+ },
+ .max_channel = LP5521_MAX_LEDS,
+ .post_init_device = lp5521_post_init_device,
+ .brightness_work_fn = lp5521_led_brightness_work,
+ .set_led_current = lp5521_set_led_current,
+ .firmware_cb = lp5521_firmware_loaded,
+ .run_engine = lp5521_run_engine,
+ .dev_attr_group = &lp5521_group,
+};
+
+static int lp5521_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ int ret;
+ struct lp55xx_chip *chip;
+ struct lp55xx_led *led;
+ struct lp55xx_platform_data *pdata;
+ struct device_node *np = client->dev.of_node;
+
+ if (!dev_get_platdata(&client->dev)) {
+ if (np) {
+ ret = lp55xx_of_populate_pdata(&client->dev, np);
+ if (ret < 0)
+ return ret;
+ } else {
+ dev_err(&client->dev, "no platform data\n");
+ return -EINVAL;
+ }
+ }
+ pdata = dev_get_platdata(&client->dev);
+
+ chip = devm_kzalloc(&client->dev, sizeof(*chip), GFP_KERNEL);
+ if (!chip)
+ return -ENOMEM;
+
+ led = devm_kzalloc(&client->dev,
+ sizeof(*led) * pdata->num_channels, GFP_KERNEL);
+ if (!led)
+ return -ENOMEM;
+
+ chip->cl = client;
+ chip->pdata = pdata;
+ chip->cfg = &lp5521_cfg;
+
+ mutex_init(&chip->lock);
+
+ i2c_set_clientdata(client, led);
+
+ ret = lp55xx_init_device(chip);
+ if (ret)
+ goto err_init;
+
+ dev_info(&client->dev, "%s programmable led chip found\n", id->name);
+
+ ret = lp55xx_register_leds(led, chip);
+ if (ret)
+ goto err_register_leds;
+
+ ret = lp55xx_register_sysfs(chip);
+ if (ret) {
+ dev_err(&client->dev, "registering sysfs failed\n");
+ goto err_register_sysfs;
+ }
+
+ return 0;
+
+err_register_sysfs:
+ lp55xx_unregister_leds(led, chip);
+err_register_leds:
+ lp55xx_deinit_device(chip);
+err_init:
+ return ret;
+}
+
+static int lp5521_remove(struct i2c_client *client)
+{
+ struct lp55xx_led *led = i2c_get_clientdata(client);
+ struct lp55xx_chip *chip = led->chip;
+
+ lp5521_stop_all_engines(chip);
+ lp55xx_unregister_sysfs(chip);
+ lp55xx_unregister_leds(led, chip);
+ lp55xx_deinit_device(chip);
+
+ return 0;
+}
+
+static const struct i2c_device_id lp5521_id[] = {
+ { "lp5521", 0 }, /* Three channel chip */
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, lp5521_id);
+
+#ifdef CONFIG_OF
+static const struct of_device_id of_lp5521_leds_match[] = {
+ { .compatible = "national,lp5521", },
+ {},
+};
+
+MODULE_DEVICE_TABLE(of, of_lp5521_leds_match);
+#endif
+static struct i2c_driver lp5521_driver = {
+ .driver = {
+ .name = "lp5521",
+ .of_match_table = of_match_ptr(of_lp5521_leds_match),
+ },
+ .probe = lp5521_probe,
+ .remove = lp5521_remove,
+ .id_table = lp5521_id,
+};
+
+module_i2c_driver(lp5521_driver);
+
+MODULE_AUTHOR("Mathias Nyman, Yuri Zaporozhets, Samu Onkalo");
+MODULE_AUTHOR("Milo Kim <milo.kim@ti.com>");
+MODULE_DESCRIPTION("LP5521 LED engine");
+MODULE_LICENSE("GPL v2");
diff --git a/kernel/drivers/leds/leds-lp5523.c b/kernel/drivers/leds/leds-lp5523.c
new file mode 100644
index 000000000..9e1716f80
--- /dev/null
+++ b/kernel/drivers/leds/leds-lp5523.c
@@ -0,0 +1,839 @@
+/*
+ * lp5523.c - LP5523, LP55231 LED Driver
+ *
+ * Copyright (C) 2010 Nokia Corporation
+ * Copyright (C) 2012 Texas Instruments
+ *
+ * Contact: Samu Onkalo <samu.p.onkalo@nokia.com>
+ * Milo(Woogyom) Kim <milo.kim@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ */
+
+#include <linux/delay.h>
+#include <linux/firmware.h>
+#include <linux/i2c.h>
+#include <linux/leds.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/of.h>
+#include <linux/platform_data/leds-lp55xx.h>
+#include <linux/slab.h>
+
+#include "leds-lp55xx-common.h"
+
+#define LP5523_PROGRAM_LENGTH 32 /* bytes */
+/* Memory is used like this:
+ 0x00 engine 1 program
+ 0x10 engine 2 program
+ 0x20 engine 3 program
+ 0x30 engine 1 muxing info
+ 0x40 engine 2 muxing info
+ 0x50 engine 3 muxing info
+*/
+#define LP5523_MAX_LEDS 9
+
+/* Registers */
+#define LP5523_REG_ENABLE 0x00
+#define LP5523_REG_OP_MODE 0x01
+#define LP5523_REG_ENABLE_LEDS_MSB 0x04
+#define LP5523_REG_ENABLE_LEDS_LSB 0x05
+#define LP5523_REG_LED_PWM_BASE 0x16
+#define LP5523_REG_LED_CURRENT_BASE 0x26
+#define LP5523_REG_CONFIG 0x36
+#define LP5523_REG_STATUS 0x3A
+#define LP5523_REG_RESET 0x3D
+#define LP5523_REG_LED_TEST_CTRL 0x41
+#define LP5523_REG_LED_TEST_ADC 0x42
+#define LP5523_REG_CH1_PROG_START 0x4C
+#define LP5523_REG_CH2_PROG_START 0x4D
+#define LP5523_REG_CH3_PROG_START 0x4E
+#define LP5523_REG_PROG_PAGE_SEL 0x4F
+#define LP5523_REG_PROG_MEM 0x50
+
+/* Bit description in registers */
+#define LP5523_ENABLE 0x40
+#define LP5523_AUTO_INC 0x40
+#define LP5523_PWR_SAVE 0x20
+#define LP5523_PWM_PWR_SAVE 0x04
+#define LP5523_CP_AUTO 0x18
+#define LP5523_AUTO_CLK 0x02
+
+#define LP5523_EN_LEDTEST 0x80
+#define LP5523_LEDTEST_DONE 0x80
+#define LP5523_RESET 0xFF
+#define LP5523_ADC_SHORTCIRC_LIM 80
+#define LP5523_EXT_CLK_USED 0x08
+#define LP5523_ENG_STATUS_MASK 0x07
+
+/* Memory Page Selection */
+#define LP5523_PAGE_ENG1 0
+#define LP5523_PAGE_ENG2 1
+#define LP5523_PAGE_ENG3 2
+#define LP5523_PAGE_MUX1 3
+#define LP5523_PAGE_MUX2 4
+#define LP5523_PAGE_MUX3 5
+
+/* Program Memory Operations */
+#define LP5523_MODE_ENG1_M 0x30 /* Operation Mode Register */
+#define LP5523_MODE_ENG2_M 0x0C
+#define LP5523_MODE_ENG3_M 0x03
+#define LP5523_LOAD_ENG1 0x10
+#define LP5523_LOAD_ENG2 0x04
+#define LP5523_LOAD_ENG3 0x01
+
+#define LP5523_ENG1_IS_LOADING(mode) \
+ ((mode & LP5523_MODE_ENG1_M) == LP5523_LOAD_ENG1)
+#define LP5523_ENG2_IS_LOADING(mode) \
+ ((mode & LP5523_MODE_ENG2_M) == LP5523_LOAD_ENG2)
+#define LP5523_ENG3_IS_LOADING(mode) \
+ ((mode & LP5523_MODE_ENG3_M) == LP5523_LOAD_ENG3)
+
+#define LP5523_EXEC_ENG1_M 0x30 /* Enable Register */
+#define LP5523_EXEC_ENG2_M 0x0C
+#define LP5523_EXEC_ENG3_M 0x03
+#define LP5523_EXEC_M 0x3F
+#define LP5523_RUN_ENG1 0x20
+#define LP5523_RUN_ENG2 0x08
+#define LP5523_RUN_ENG3 0x02
+
+#define LED_ACTIVE(mux, led) (!!(mux & (0x0001 << led)))
+
+enum lp5523_chip_id {
+ LP5523,
+ LP55231,
+};
+
+static int lp5523_init_program_engine(struct lp55xx_chip *chip);
+
+static inline void lp5523_wait_opmode_done(void)
+{
+ usleep_range(1000, 2000);
+}
+
+static void lp5523_set_led_current(struct lp55xx_led *led, u8 led_current)
+{
+ led->led_current = led_current;
+ lp55xx_write(led->chip, LP5523_REG_LED_CURRENT_BASE + led->chan_nr,
+ led_current);
+}
+
+static int lp5523_post_init_device(struct lp55xx_chip *chip)
+{
+ int ret;
+
+ ret = lp55xx_write(chip, LP5523_REG_ENABLE, LP5523_ENABLE);
+ if (ret)
+ return ret;
+
+ /* Chip startup time is 500 us, 1 - 2 ms gives some margin */
+ usleep_range(1000, 2000);
+
+ ret = lp55xx_write(chip, LP5523_REG_CONFIG,
+ LP5523_AUTO_INC | LP5523_PWR_SAVE |
+ LP5523_CP_AUTO | LP5523_AUTO_CLK |
+ LP5523_PWM_PWR_SAVE);
+ if (ret)
+ return ret;
+
+ /* turn on all leds */
+ ret = lp55xx_write(chip, LP5523_REG_ENABLE_LEDS_MSB, 0x01);
+ if (ret)
+ return ret;
+
+ ret = lp55xx_write(chip, LP5523_REG_ENABLE_LEDS_LSB, 0xff);
+ if (ret)
+ return ret;
+
+ return lp5523_init_program_engine(chip);
+}
+
+static void lp5523_load_engine(struct lp55xx_chip *chip)
+{
+ enum lp55xx_engine_index idx = chip->engine_idx;
+ u8 mask[] = {
+ [LP55XX_ENGINE_1] = LP5523_MODE_ENG1_M,
+ [LP55XX_ENGINE_2] = LP5523_MODE_ENG2_M,
+ [LP55XX_ENGINE_3] = LP5523_MODE_ENG3_M,
+ };
+
+ u8 val[] = {
+ [LP55XX_ENGINE_1] = LP5523_LOAD_ENG1,
+ [LP55XX_ENGINE_2] = LP5523_LOAD_ENG2,
+ [LP55XX_ENGINE_3] = LP5523_LOAD_ENG3,
+ };
+
+ lp55xx_update_bits(chip, LP5523_REG_OP_MODE, mask[idx], val[idx]);
+
+ lp5523_wait_opmode_done();
+}
+
+static void lp5523_load_engine_and_select_page(struct lp55xx_chip *chip)
+{
+ enum lp55xx_engine_index idx = chip->engine_idx;
+ u8 page_sel[] = {
+ [LP55XX_ENGINE_1] = LP5523_PAGE_ENG1,
+ [LP55XX_ENGINE_2] = LP5523_PAGE_ENG2,
+ [LP55XX_ENGINE_3] = LP5523_PAGE_ENG3,
+ };
+
+ lp5523_load_engine(chip);
+
+ lp55xx_write(chip, LP5523_REG_PROG_PAGE_SEL, page_sel[idx]);
+}
+
+static void lp5523_stop_all_engines(struct lp55xx_chip *chip)
+{
+ lp55xx_write(chip, LP5523_REG_OP_MODE, 0);
+ lp5523_wait_opmode_done();
+}
+
+static void lp5523_stop_engine(struct lp55xx_chip *chip)
+{
+ enum lp55xx_engine_index idx = chip->engine_idx;
+ u8 mask[] = {
+ [LP55XX_ENGINE_1] = LP5523_MODE_ENG1_M,
+ [LP55XX_ENGINE_2] = LP5523_MODE_ENG2_M,
+ [LP55XX_ENGINE_3] = LP5523_MODE_ENG3_M,
+ };
+
+ lp55xx_update_bits(chip, LP5523_REG_OP_MODE, mask[idx], 0);
+
+ lp5523_wait_opmode_done();
+}
+
+static void lp5523_turn_off_channels(struct lp55xx_chip *chip)
+{
+ int i;
+
+ for (i = 0; i < LP5523_MAX_LEDS; i++)
+ lp55xx_write(chip, LP5523_REG_LED_PWM_BASE + i, 0);
+}
+
+static void lp5523_run_engine(struct lp55xx_chip *chip, bool start)
+{
+ int ret;
+ u8 mode;
+ u8 exec;
+
+ /* stop engine */
+ if (!start) {
+ lp5523_stop_engine(chip);
+ lp5523_turn_off_channels(chip);
+ return;
+ }
+
+ /*
+ * To run the engine,
+ * operation mode and enable register should updated at the same time
+ */
+
+ ret = lp55xx_read(chip, LP5523_REG_OP_MODE, &mode);
+ if (ret)
+ return;
+
+ ret = lp55xx_read(chip, LP5523_REG_ENABLE, &exec);
+ if (ret)
+ return;
+
+ /* change operation mode to RUN only when each engine is loading */
+ if (LP5523_ENG1_IS_LOADING(mode)) {
+ mode = (mode & ~LP5523_MODE_ENG1_M) | LP5523_RUN_ENG1;
+ exec = (exec & ~LP5523_EXEC_ENG1_M) | LP5523_RUN_ENG1;
+ }
+
+ if (LP5523_ENG2_IS_LOADING(mode)) {
+ mode = (mode & ~LP5523_MODE_ENG2_M) | LP5523_RUN_ENG2;
+ exec = (exec & ~LP5523_EXEC_ENG2_M) | LP5523_RUN_ENG2;
+ }
+
+ if (LP5523_ENG3_IS_LOADING(mode)) {
+ mode = (mode & ~LP5523_MODE_ENG3_M) | LP5523_RUN_ENG3;
+ exec = (exec & ~LP5523_EXEC_ENG3_M) | LP5523_RUN_ENG3;
+ }
+
+ lp55xx_write(chip, LP5523_REG_OP_MODE, mode);
+ lp5523_wait_opmode_done();
+
+ lp55xx_update_bits(chip, LP5523_REG_ENABLE, LP5523_EXEC_M, exec);
+}
+
+static int lp5523_init_program_engine(struct lp55xx_chip *chip)
+{
+ int i;
+ int j;
+ int ret;
+ u8 status;
+ /* one pattern per engine setting LED MUX start and stop addresses */
+ static const u8 pattern[][LP5523_PROGRAM_LENGTH] = {
+ { 0x9c, 0x30, 0x9c, 0xb0, 0x9d, 0x80, 0xd8, 0x00, 0},
+ { 0x9c, 0x40, 0x9c, 0xc0, 0x9d, 0x80, 0xd8, 0x00, 0},
+ { 0x9c, 0x50, 0x9c, 0xd0, 0x9d, 0x80, 0xd8, 0x00, 0},
+ };
+
+ /* hardcode 32 bytes of memory for each engine from program memory */
+ ret = lp55xx_write(chip, LP5523_REG_CH1_PROG_START, 0x00);
+ if (ret)
+ return ret;
+
+ ret = lp55xx_write(chip, LP5523_REG_CH2_PROG_START, 0x10);
+ if (ret)
+ return ret;
+
+ ret = lp55xx_write(chip, LP5523_REG_CH3_PROG_START, 0x20);
+ if (ret)
+ return ret;
+
+ /* write LED MUX address space for each engine */
+ for (i = LP55XX_ENGINE_1; i <= LP55XX_ENGINE_3; i++) {
+ chip->engine_idx = i;
+ lp5523_load_engine_and_select_page(chip);
+
+ for (j = 0; j < LP5523_PROGRAM_LENGTH; j++) {
+ ret = lp55xx_write(chip, LP5523_REG_PROG_MEM + j,
+ pattern[i - 1][j]);
+ if (ret)
+ goto out;
+ }
+ }
+
+ lp5523_run_engine(chip, true);
+
+ /* Let the programs run for couple of ms and check the engine status */
+ usleep_range(3000, 6000);
+ lp55xx_read(chip, LP5523_REG_STATUS, &status);
+ status &= LP5523_ENG_STATUS_MASK;
+
+ if (status != LP5523_ENG_STATUS_MASK) {
+ dev_err(&chip->cl->dev,
+ "cound not configure LED engine, status = 0x%.2x\n",
+ status);
+ ret = -1;
+ }
+
+out:
+ lp5523_stop_all_engines(chip);
+ return ret;
+}
+
+static int lp5523_update_program_memory(struct lp55xx_chip *chip,
+ const u8 *data, size_t size)
+{
+ u8 pattern[LP5523_PROGRAM_LENGTH] = {0};
+ unsigned cmd;
+ char c[3];
+ int nrchars;
+ int ret;
+ int offset = 0;
+ int i = 0;
+
+ while ((offset < size - 1) && (i < LP5523_PROGRAM_LENGTH)) {
+ /* separate sscanfs because length is working only for %s */
+ ret = sscanf(data + offset, "%2s%n ", c, &nrchars);
+ if (ret != 1)
+ goto err;
+
+ ret = sscanf(c, "%2x", &cmd);
+ if (ret != 1)
+ goto err;
+
+ pattern[i] = (u8)cmd;
+ offset += nrchars;
+ i++;
+ }
+
+ /* Each instruction is 16bit long. Check that length is even */
+ if (i % 2)
+ goto err;
+
+ for (i = 0; i < LP5523_PROGRAM_LENGTH; i++) {
+ ret = lp55xx_write(chip, LP5523_REG_PROG_MEM + i, pattern[i]);
+ if (ret)
+ return -EINVAL;
+ }
+
+ return size;
+
+err:
+ dev_err(&chip->cl->dev, "wrong pattern format\n");
+ return -EINVAL;
+}
+
+static void lp5523_firmware_loaded(struct lp55xx_chip *chip)
+{
+ const struct firmware *fw = chip->fw;
+
+ if (fw->size > LP5523_PROGRAM_LENGTH) {
+ dev_err(&chip->cl->dev, "firmware data size overflow: %zu\n",
+ fw->size);
+ return;
+ }
+
+ /*
+ * Program momery sequence
+ * 1) set engine mode to "LOAD"
+ * 2) write firmware data into program memory
+ */
+
+ lp5523_load_engine_and_select_page(chip);
+ lp5523_update_program_memory(chip, fw->data, fw->size);
+}
+
+static ssize_t show_engine_mode(struct device *dev,
+ struct device_attribute *attr,
+ char *buf, int nr)
+{
+ struct lp55xx_led *led = i2c_get_clientdata(to_i2c_client(dev));
+ struct lp55xx_chip *chip = led->chip;
+ enum lp55xx_engine_mode mode = chip->engines[nr - 1].mode;
+
+ switch (mode) {
+ case LP55XX_ENGINE_RUN:
+ return sprintf(buf, "run\n");
+ case LP55XX_ENGINE_LOAD:
+ return sprintf(buf, "load\n");
+ case LP55XX_ENGINE_DISABLED:
+ default:
+ return sprintf(buf, "disabled\n");
+ }
+}
+show_mode(1)
+show_mode(2)
+show_mode(3)
+
+static ssize_t store_engine_mode(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t len, int nr)
+{
+ struct lp55xx_led *led = i2c_get_clientdata(to_i2c_client(dev));
+ struct lp55xx_chip *chip = led->chip;
+ struct lp55xx_engine *engine = &chip->engines[nr - 1];
+
+ mutex_lock(&chip->lock);
+
+ chip->engine_idx = nr;
+
+ if (!strncmp(buf, "run", 3)) {
+ lp5523_run_engine(chip, true);
+ engine->mode = LP55XX_ENGINE_RUN;
+ } else if (!strncmp(buf, "load", 4)) {
+ lp5523_stop_engine(chip);
+ lp5523_load_engine(chip);
+ engine->mode = LP55XX_ENGINE_LOAD;
+ } else if (!strncmp(buf, "disabled", 8)) {
+ lp5523_stop_engine(chip);
+ engine->mode = LP55XX_ENGINE_DISABLED;
+ }
+
+ mutex_unlock(&chip->lock);
+
+ return len;
+}
+store_mode(1)
+store_mode(2)
+store_mode(3)
+
+static int lp5523_mux_parse(const char *buf, u16 *mux, size_t len)
+{
+ u16 tmp_mux = 0;
+ int i;
+
+ len = min_t(int, len, LP5523_MAX_LEDS);
+
+ for (i = 0; i < len; i++) {
+ switch (buf[i]) {
+ case '1':
+ tmp_mux |= (1 << i);
+ break;
+ case '0':
+ break;
+ case '\n':
+ i = len;
+ break;
+ default:
+ return -1;
+ }
+ }
+ *mux = tmp_mux;
+
+ return 0;
+}
+
+static void lp5523_mux_to_array(u16 led_mux, char *array)
+{
+ int i, pos = 0;
+ for (i = 0; i < LP5523_MAX_LEDS; i++)
+ pos += sprintf(array + pos, "%x", LED_ACTIVE(led_mux, i));
+
+ array[pos] = '\0';
+}
+
+static ssize_t show_engine_leds(struct device *dev,
+ struct device_attribute *attr,
+ char *buf, int nr)
+{
+ struct lp55xx_led *led = i2c_get_clientdata(to_i2c_client(dev));
+ struct lp55xx_chip *chip = led->chip;
+ char mux[LP5523_MAX_LEDS + 1];
+
+ lp5523_mux_to_array(chip->engines[nr - 1].led_mux, mux);
+
+ return sprintf(buf, "%s\n", mux);
+}
+show_leds(1)
+show_leds(2)
+show_leds(3)
+
+static int lp5523_load_mux(struct lp55xx_chip *chip, u16 mux, int nr)
+{
+ struct lp55xx_engine *engine = &chip->engines[nr - 1];
+ int ret;
+ u8 mux_page[] = {
+ [LP55XX_ENGINE_1] = LP5523_PAGE_MUX1,
+ [LP55XX_ENGINE_2] = LP5523_PAGE_MUX2,
+ [LP55XX_ENGINE_3] = LP5523_PAGE_MUX3,
+ };
+
+ lp5523_load_engine(chip);
+
+ ret = lp55xx_write(chip, LP5523_REG_PROG_PAGE_SEL, mux_page[nr]);
+ if (ret)
+ return ret;
+
+ ret = lp55xx_write(chip, LP5523_REG_PROG_MEM , (u8)(mux >> 8));
+ if (ret)
+ return ret;
+
+ ret = lp55xx_write(chip, LP5523_REG_PROG_MEM + 1, (u8)(mux));
+ if (ret)
+ return ret;
+
+ engine->led_mux = mux;
+ return 0;
+}
+
+static ssize_t store_engine_leds(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t len, int nr)
+{
+ struct lp55xx_led *led = i2c_get_clientdata(to_i2c_client(dev));
+ struct lp55xx_chip *chip = led->chip;
+ struct lp55xx_engine *engine = &chip->engines[nr - 1];
+ u16 mux = 0;
+ ssize_t ret;
+
+ if (lp5523_mux_parse(buf, &mux, len))
+ return -EINVAL;
+
+ mutex_lock(&chip->lock);
+
+ chip->engine_idx = nr;
+ ret = -EINVAL;
+
+ if (engine->mode != LP55XX_ENGINE_LOAD)
+ goto leave;
+
+ if (lp5523_load_mux(chip, mux, nr))
+ goto leave;
+
+ ret = len;
+leave:
+ mutex_unlock(&chip->lock);
+ return ret;
+}
+store_leds(1)
+store_leds(2)
+store_leds(3)
+
+static ssize_t store_engine_load(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t len, int nr)
+{
+ struct lp55xx_led *led = i2c_get_clientdata(to_i2c_client(dev));
+ struct lp55xx_chip *chip = led->chip;
+ int ret;
+
+ mutex_lock(&chip->lock);
+
+ chip->engine_idx = nr;
+ lp5523_load_engine_and_select_page(chip);
+ ret = lp5523_update_program_memory(chip, buf, len);
+
+ mutex_unlock(&chip->lock);
+
+ return ret;
+}
+store_load(1)
+store_load(2)
+store_load(3)
+
+static ssize_t lp5523_selftest(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct lp55xx_led *led = i2c_get_clientdata(to_i2c_client(dev));
+ struct lp55xx_chip *chip = led->chip;
+ struct lp55xx_platform_data *pdata = chip->pdata;
+ int i, ret, pos = 0;
+ u8 status, adc, vdd;
+
+ mutex_lock(&chip->lock);
+
+ ret = lp55xx_read(chip, LP5523_REG_STATUS, &status);
+ if (ret < 0)
+ goto fail;
+
+ /* Check that ext clock is really in use if requested */
+ if (pdata->clock_mode == LP55XX_CLOCK_EXT) {
+ if ((status & LP5523_EXT_CLK_USED) == 0)
+ goto fail;
+ }
+
+ /* Measure VDD (i.e. VBAT) first (channel 16 corresponds to VDD) */
+ lp55xx_write(chip, LP5523_REG_LED_TEST_CTRL, LP5523_EN_LEDTEST | 16);
+ usleep_range(3000, 6000); /* ADC conversion time is typically 2.7 ms */
+ ret = lp55xx_read(chip, LP5523_REG_STATUS, &status);
+ if (ret < 0)
+ goto fail;
+
+ if (!(status & LP5523_LEDTEST_DONE))
+ usleep_range(3000, 6000); /* Was not ready. Wait little bit */
+
+ ret = lp55xx_read(chip, LP5523_REG_LED_TEST_ADC, &vdd);
+ if (ret < 0)
+ goto fail;
+
+ vdd--; /* There may be some fluctuation in measurement */
+
+ for (i = 0; i < LP5523_MAX_LEDS; i++) {
+ /* Skip non-existing channels */
+ if (pdata->led_config[i].led_current == 0)
+ continue;
+
+ /* Set default current */
+ lp55xx_write(chip, LP5523_REG_LED_CURRENT_BASE + i,
+ pdata->led_config[i].led_current);
+
+ lp55xx_write(chip, LP5523_REG_LED_PWM_BASE + i, 0xff);
+ /* let current stabilize 2 - 4ms before measurements start */
+ usleep_range(2000, 4000);
+ lp55xx_write(chip, LP5523_REG_LED_TEST_CTRL,
+ LP5523_EN_LEDTEST | i);
+ /* ADC conversion time is 2.7 ms typically */
+ usleep_range(3000, 6000);
+ ret = lp55xx_read(chip, LP5523_REG_STATUS, &status);
+ if (ret < 0)
+ goto fail;
+
+ if (!(status & LP5523_LEDTEST_DONE))
+ usleep_range(3000, 6000);/* Was not ready. Wait. */
+
+ ret = lp55xx_read(chip, LP5523_REG_LED_TEST_ADC, &adc);
+ if (ret < 0)
+ goto fail;
+
+ if (adc >= vdd || adc < LP5523_ADC_SHORTCIRC_LIM)
+ pos += sprintf(buf + pos, "LED %d FAIL\n", i);
+
+ lp55xx_write(chip, LP5523_REG_LED_PWM_BASE + i, 0x00);
+
+ /* Restore current */
+ lp55xx_write(chip, LP5523_REG_LED_CURRENT_BASE + i,
+ led->led_current);
+ led++;
+ }
+ if (pos == 0)
+ pos = sprintf(buf, "OK\n");
+ goto release_lock;
+fail:
+ pos = sprintf(buf, "FAIL\n");
+
+release_lock:
+ mutex_unlock(&chip->lock);
+
+ return pos;
+}
+
+static void lp5523_led_brightness_work(struct work_struct *work)
+{
+ struct lp55xx_led *led = container_of(work, struct lp55xx_led,
+ brightness_work);
+ struct lp55xx_chip *chip = led->chip;
+
+ mutex_lock(&chip->lock);
+ lp55xx_write(chip, LP5523_REG_LED_PWM_BASE + led->chan_nr,
+ led->brightness);
+ mutex_unlock(&chip->lock);
+}
+
+static LP55XX_DEV_ATTR_RW(engine1_mode, show_engine1_mode, store_engine1_mode);
+static LP55XX_DEV_ATTR_RW(engine2_mode, show_engine2_mode, store_engine2_mode);
+static LP55XX_DEV_ATTR_RW(engine3_mode, show_engine3_mode, store_engine3_mode);
+static LP55XX_DEV_ATTR_RW(engine1_leds, show_engine1_leds, store_engine1_leds);
+static LP55XX_DEV_ATTR_RW(engine2_leds, show_engine2_leds, store_engine2_leds);
+static LP55XX_DEV_ATTR_RW(engine3_leds, show_engine3_leds, store_engine3_leds);
+static LP55XX_DEV_ATTR_WO(engine1_load, store_engine1_load);
+static LP55XX_DEV_ATTR_WO(engine2_load, store_engine2_load);
+static LP55XX_DEV_ATTR_WO(engine3_load, store_engine3_load);
+static LP55XX_DEV_ATTR_RO(selftest, lp5523_selftest);
+
+static struct attribute *lp5523_attributes[] = {
+ &dev_attr_engine1_mode.attr,
+ &dev_attr_engine2_mode.attr,
+ &dev_attr_engine3_mode.attr,
+ &dev_attr_engine1_load.attr,
+ &dev_attr_engine2_load.attr,
+ &dev_attr_engine3_load.attr,
+ &dev_attr_engine1_leds.attr,
+ &dev_attr_engine2_leds.attr,
+ &dev_attr_engine3_leds.attr,
+ &dev_attr_selftest.attr,
+ NULL,
+};
+
+static const struct attribute_group lp5523_group = {
+ .attrs = lp5523_attributes,
+};
+
+/* Chip specific configurations */
+static struct lp55xx_device_config lp5523_cfg = {
+ .reset = {
+ .addr = LP5523_REG_RESET,
+ .val = LP5523_RESET,
+ },
+ .enable = {
+ .addr = LP5523_REG_ENABLE,
+ .val = LP5523_ENABLE,
+ },
+ .max_channel = LP5523_MAX_LEDS,
+ .post_init_device = lp5523_post_init_device,
+ .brightness_work_fn = lp5523_led_brightness_work,
+ .set_led_current = lp5523_set_led_current,
+ .firmware_cb = lp5523_firmware_loaded,
+ .run_engine = lp5523_run_engine,
+ .dev_attr_group = &lp5523_group,
+};
+
+static int lp5523_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ int ret;
+ struct lp55xx_chip *chip;
+ struct lp55xx_led *led;
+ struct lp55xx_platform_data *pdata;
+ struct device_node *np = client->dev.of_node;
+
+ if (!dev_get_platdata(&client->dev)) {
+ if (np) {
+ ret = lp55xx_of_populate_pdata(&client->dev, np);
+ if (ret < 0)
+ return ret;
+ } else {
+ dev_err(&client->dev, "no platform data\n");
+ return -EINVAL;
+ }
+ }
+ pdata = dev_get_platdata(&client->dev);
+
+ chip = devm_kzalloc(&client->dev, sizeof(*chip), GFP_KERNEL);
+ if (!chip)
+ return -ENOMEM;
+
+ led = devm_kzalloc(&client->dev,
+ sizeof(*led) * pdata->num_channels, GFP_KERNEL);
+ if (!led)
+ return -ENOMEM;
+
+ chip->cl = client;
+ chip->pdata = pdata;
+ chip->cfg = &lp5523_cfg;
+
+ mutex_init(&chip->lock);
+
+ i2c_set_clientdata(client, led);
+
+ ret = lp55xx_init_device(chip);
+ if (ret)
+ goto err_init;
+
+ dev_info(&client->dev, "%s Programmable led chip found\n", id->name);
+
+ ret = lp55xx_register_leds(led, chip);
+ if (ret)
+ goto err_register_leds;
+
+ ret = lp55xx_register_sysfs(chip);
+ if (ret) {
+ dev_err(&client->dev, "registering sysfs failed\n");
+ goto err_register_sysfs;
+ }
+
+ return 0;
+
+err_register_sysfs:
+ lp55xx_unregister_leds(led, chip);
+err_register_leds:
+ lp55xx_deinit_device(chip);
+err_init:
+ return ret;
+}
+
+static int lp5523_remove(struct i2c_client *client)
+{
+ struct lp55xx_led *led = i2c_get_clientdata(client);
+ struct lp55xx_chip *chip = led->chip;
+
+ lp5523_stop_all_engines(chip);
+ lp55xx_unregister_sysfs(chip);
+ lp55xx_unregister_leds(led, chip);
+ lp55xx_deinit_device(chip);
+
+ return 0;
+}
+
+static const struct i2c_device_id lp5523_id[] = {
+ { "lp5523", LP5523 },
+ { "lp55231", LP55231 },
+ { }
+};
+
+MODULE_DEVICE_TABLE(i2c, lp5523_id);
+
+#ifdef CONFIG_OF
+static const struct of_device_id of_lp5523_leds_match[] = {
+ { .compatible = "national,lp5523", },
+ { .compatible = "ti,lp55231", },
+ {},
+};
+
+MODULE_DEVICE_TABLE(of, of_lp5523_leds_match);
+#endif
+
+static struct i2c_driver lp5523_driver = {
+ .driver = {
+ .name = "lp5523x",
+ .of_match_table = of_match_ptr(of_lp5523_leds_match),
+ },
+ .probe = lp5523_probe,
+ .remove = lp5523_remove,
+ .id_table = lp5523_id,
+};
+
+module_i2c_driver(lp5523_driver);
+
+MODULE_AUTHOR("Mathias Nyman <mathias.nyman@nokia.com>");
+MODULE_AUTHOR("Milo Kim <milo.kim@ti.com>");
+MODULE_DESCRIPTION("LP5523 LED engine");
+MODULE_LICENSE("GPL");
diff --git a/kernel/drivers/leds/leds-lp5562.c b/kernel/drivers/leds/leds-lp5562.c
new file mode 100644
index 000000000..ca85724ab
--- /dev/null
+++ b/kernel/drivers/leds/leds-lp5562.c
@@ -0,0 +1,617 @@
+/*
+ * LP5562 LED driver
+ *
+ * Copyright (C) 2013 Texas Instruments
+ *
+ * Author: Milo(Woogyom) Kim <milo.kim@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/delay.h>
+#include <linux/firmware.h>
+#include <linux/i2c.h>
+#include <linux/leds.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/of.h>
+#include <linux/platform_data/leds-lp55xx.h>
+#include <linux/slab.h>
+
+#include "leds-lp55xx-common.h"
+
+#define LP5562_PROGRAM_LENGTH 32
+#define LP5562_MAX_LEDS 4
+
+/* ENABLE Register 00h */
+#define LP5562_REG_ENABLE 0x00
+#define LP5562_EXEC_ENG1_M 0x30
+#define LP5562_EXEC_ENG2_M 0x0C
+#define LP5562_EXEC_ENG3_M 0x03
+#define LP5562_EXEC_M 0x3F
+#define LP5562_MASTER_ENABLE 0x40 /* Chip master enable */
+#define LP5562_LOGARITHMIC_PWM 0x80 /* Logarithmic PWM adjustment */
+#define LP5562_EXEC_RUN 0x2A
+#define LP5562_ENABLE_DEFAULT \
+ (LP5562_MASTER_ENABLE | LP5562_LOGARITHMIC_PWM)
+#define LP5562_ENABLE_RUN_PROGRAM \
+ (LP5562_ENABLE_DEFAULT | LP5562_EXEC_RUN)
+
+/* OPMODE Register 01h */
+#define LP5562_REG_OP_MODE 0x01
+#define LP5562_MODE_ENG1_M 0x30
+#define LP5562_MODE_ENG2_M 0x0C
+#define LP5562_MODE_ENG3_M 0x03
+#define LP5562_LOAD_ENG1 0x10
+#define LP5562_LOAD_ENG2 0x04
+#define LP5562_LOAD_ENG3 0x01
+#define LP5562_RUN_ENG1 0x20
+#define LP5562_RUN_ENG2 0x08
+#define LP5562_RUN_ENG3 0x02
+#define LP5562_ENG1_IS_LOADING(mode) \
+ ((mode & LP5562_MODE_ENG1_M) == LP5562_LOAD_ENG1)
+#define LP5562_ENG2_IS_LOADING(mode) \
+ ((mode & LP5562_MODE_ENG2_M) == LP5562_LOAD_ENG2)
+#define LP5562_ENG3_IS_LOADING(mode) \
+ ((mode & LP5562_MODE_ENG3_M) == LP5562_LOAD_ENG3)
+
+/* BRIGHTNESS Registers */
+#define LP5562_REG_R_PWM 0x04
+#define LP5562_REG_G_PWM 0x03
+#define LP5562_REG_B_PWM 0x02
+#define LP5562_REG_W_PWM 0x0E
+
+/* CURRENT Registers */
+#define LP5562_REG_R_CURRENT 0x07
+#define LP5562_REG_G_CURRENT 0x06
+#define LP5562_REG_B_CURRENT 0x05
+#define LP5562_REG_W_CURRENT 0x0F
+
+/* CONFIG Register 08h */
+#define LP5562_REG_CONFIG 0x08
+#define LP5562_PWM_HF 0x40
+#define LP5562_PWRSAVE_EN 0x20
+#define LP5562_CLK_INT 0x01 /* Internal clock */
+#define LP5562_DEFAULT_CFG (LP5562_PWM_HF | LP5562_PWRSAVE_EN)
+
+/* RESET Register 0Dh */
+#define LP5562_REG_RESET 0x0D
+#define LP5562_RESET 0xFF
+
+/* PROGRAM ENGINE Registers */
+#define LP5562_REG_PROG_MEM_ENG1 0x10
+#define LP5562_REG_PROG_MEM_ENG2 0x30
+#define LP5562_REG_PROG_MEM_ENG3 0x50
+
+/* LEDMAP Register 70h */
+#define LP5562_REG_ENG_SEL 0x70
+#define LP5562_ENG_SEL_PWM 0
+#define LP5562_ENG_FOR_RGB_M 0x3F
+#define LP5562_ENG_SEL_RGB 0x1B /* R:ENG1, G:ENG2, B:ENG3 */
+#define LP5562_ENG_FOR_W_M 0xC0
+#define LP5562_ENG1_FOR_W 0x40 /* W:ENG1 */
+#define LP5562_ENG2_FOR_W 0x80 /* W:ENG2 */
+#define LP5562_ENG3_FOR_W 0xC0 /* W:ENG3 */
+
+/* Program Commands */
+#define LP5562_CMD_DISABLE 0x00
+#define LP5562_CMD_LOAD 0x15
+#define LP5562_CMD_RUN 0x2A
+#define LP5562_CMD_DIRECT 0x3F
+#define LP5562_PATTERN_OFF 0
+
+static inline void lp5562_wait_opmode_done(void)
+{
+ /* operation mode change needs to be longer than 153 us */
+ usleep_range(200, 300);
+}
+
+static inline void lp5562_wait_enable_done(void)
+{
+ /* it takes more 488 us to update ENABLE register */
+ usleep_range(500, 600);
+}
+
+static void lp5562_set_led_current(struct lp55xx_led *led, u8 led_current)
+{
+ u8 addr[] = {
+ LP5562_REG_R_CURRENT,
+ LP5562_REG_G_CURRENT,
+ LP5562_REG_B_CURRENT,
+ LP5562_REG_W_CURRENT,
+ };
+
+ led->led_current = led_current;
+ lp55xx_write(led->chip, addr[led->chan_nr], led_current);
+}
+
+static void lp5562_load_engine(struct lp55xx_chip *chip)
+{
+ enum lp55xx_engine_index idx = chip->engine_idx;
+ u8 mask[] = {
+ [LP55XX_ENGINE_1] = LP5562_MODE_ENG1_M,
+ [LP55XX_ENGINE_2] = LP5562_MODE_ENG2_M,
+ [LP55XX_ENGINE_3] = LP5562_MODE_ENG3_M,
+ };
+
+ u8 val[] = {
+ [LP55XX_ENGINE_1] = LP5562_LOAD_ENG1,
+ [LP55XX_ENGINE_2] = LP5562_LOAD_ENG2,
+ [LP55XX_ENGINE_3] = LP5562_LOAD_ENG3,
+ };
+
+ lp55xx_update_bits(chip, LP5562_REG_OP_MODE, mask[idx], val[idx]);
+
+ lp5562_wait_opmode_done();
+}
+
+static void lp5562_stop_engine(struct lp55xx_chip *chip)
+{
+ lp55xx_write(chip, LP5562_REG_OP_MODE, LP5562_CMD_DISABLE);
+ lp5562_wait_opmode_done();
+}
+
+static void lp5562_run_engine(struct lp55xx_chip *chip, bool start)
+{
+ int ret;
+ u8 mode;
+ u8 exec;
+
+ /* stop engine */
+ if (!start) {
+ lp55xx_write(chip, LP5562_REG_ENABLE, LP5562_ENABLE_DEFAULT);
+ lp5562_wait_enable_done();
+ lp5562_stop_engine(chip);
+ lp55xx_write(chip, LP5562_REG_ENG_SEL, LP5562_ENG_SEL_PWM);
+ lp55xx_write(chip, LP5562_REG_OP_MODE, LP5562_CMD_DIRECT);
+ lp5562_wait_opmode_done();
+ return;
+ }
+
+ /*
+ * To run the engine,
+ * operation mode and enable register should updated at the same time
+ */
+
+ ret = lp55xx_read(chip, LP5562_REG_OP_MODE, &mode);
+ if (ret)
+ return;
+
+ ret = lp55xx_read(chip, LP5562_REG_ENABLE, &exec);
+ if (ret)
+ return;
+
+ /* change operation mode to RUN only when each engine is loading */
+ if (LP5562_ENG1_IS_LOADING(mode)) {
+ mode = (mode & ~LP5562_MODE_ENG1_M) | LP5562_RUN_ENG1;
+ exec = (exec & ~LP5562_EXEC_ENG1_M) | LP5562_RUN_ENG1;
+ }
+
+ if (LP5562_ENG2_IS_LOADING(mode)) {
+ mode = (mode & ~LP5562_MODE_ENG2_M) | LP5562_RUN_ENG2;
+ exec = (exec & ~LP5562_EXEC_ENG2_M) | LP5562_RUN_ENG2;
+ }
+
+ if (LP5562_ENG3_IS_LOADING(mode)) {
+ mode = (mode & ~LP5562_MODE_ENG3_M) | LP5562_RUN_ENG3;
+ exec = (exec & ~LP5562_EXEC_ENG3_M) | LP5562_RUN_ENG3;
+ }
+
+ lp55xx_write(chip, LP5562_REG_OP_MODE, mode);
+ lp5562_wait_opmode_done();
+
+ lp55xx_update_bits(chip, LP5562_REG_ENABLE, LP5562_EXEC_M, exec);
+ lp5562_wait_enable_done();
+}
+
+static int lp5562_update_firmware(struct lp55xx_chip *chip,
+ const u8 *data, size_t size)
+{
+ enum lp55xx_engine_index idx = chip->engine_idx;
+ u8 pattern[LP5562_PROGRAM_LENGTH] = {0};
+ u8 addr[] = {
+ [LP55XX_ENGINE_1] = LP5562_REG_PROG_MEM_ENG1,
+ [LP55XX_ENGINE_2] = LP5562_REG_PROG_MEM_ENG2,
+ [LP55XX_ENGINE_3] = LP5562_REG_PROG_MEM_ENG3,
+ };
+ unsigned cmd;
+ char c[3];
+ int program_size;
+ int nrchars;
+ int offset = 0;
+ int ret;
+ int i;
+
+ /* clear program memory before updating */
+ for (i = 0; i < LP5562_PROGRAM_LENGTH; i++)
+ lp55xx_write(chip, addr[idx] + i, 0);
+
+ i = 0;
+ while ((offset < size - 1) && (i < LP5562_PROGRAM_LENGTH)) {
+ /* separate sscanfs because length is working only for %s */
+ ret = sscanf(data + offset, "%2s%n ", c, &nrchars);
+ if (ret != 1)
+ goto err;
+
+ ret = sscanf(c, "%2x", &cmd);
+ if (ret != 1)
+ goto err;
+
+ pattern[i] = (u8)cmd;
+ offset += nrchars;
+ i++;
+ }
+
+ /* Each instruction is 16bit long. Check that length is even */
+ if (i % 2)
+ goto err;
+
+ program_size = i;
+ for (i = 0; i < program_size; i++)
+ lp55xx_write(chip, addr[idx] + i, pattern[i]);
+
+ return 0;
+
+err:
+ dev_err(&chip->cl->dev, "wrong pattern format\n");
+ return -EINVAL;
+}
+
+static void lp5562_firmware_loaded(struct lp55xx_chip *chip)
+{
+ const struct firmware *fw = chip->fw;
+
+ if (fw->size > LP5562_PROGRAM_LENGTH) {
+ dev_err(&chip->cl->dev, "firmware data size overflow: %zu\n",
+ fw->size);
+ return;
+ }
+
+ /*
+ * Program momery sequence
+ * 1) set engine mode to "LOAD"
+ * 2) write firmware data into program memory
+ */
+
+ lp5562_load_engine(chip);
+ lp5562_update_firmware(chip, fw->data, fw->size);
+}
+
+static int lp5562_post_init_device(struct lp55xx_chip *chip)
+{
+ int ret;
+ u8 cfg = LP5562_DEFAULT_CFG;
+
+ /* Set all PWMs to direct control mode */
+ ret = lp55xx_write(chip, LP5562_REG_OP_MODE, LP5562_CMD_DIRECT);
+ if (ret)
+ return ret;
+
+ lp5562_wait_opmode_done();
+
+ /* Update configuration for the clock setting */
+ if (!lp55xx_is_extclk_used(chip))
+ cfg |= LP5562_CLK_INT;
+
+ ret = lp55xx_write(chip, LP5562_REG_CONFIG, cfg);
+ if (ret)
+ return ret;
+
+ /* Initialize all channels PWM to zero -> leds off */
+ lp55xx_write(chip, LP5562_REG_R_PWM, 0);
+ lp55xx_write(chip, LP5562_REG_G_PWM, 0);
+ lp55xx_write(chip, LP5562_REG_B_PWM, 0);
+ lp55xx_write(chip, LP5562_REG_W_PWM, 0);
+
+ /* Set LED map as register PWM by default */
+ lp55xx_write(chip, LP5562_REG_ENG_SEL, LP5562_ENG_SEL_PWM);
+
+ return 0;
+}
+
+static void lp5562_led_brightness_work(struct work_struct *work)
+{
+ struct lp55xx_led *led = container_of(work, struct lp55xx_led,
+ brightness_work);
+ struct lp55xx_chip *chip = led->chip;
+ u8 addr[] = {
+ LP5562_REG_R_PWM,
+ LP5562_REG_G_PWM,
+ LP5562_REG_B_PWM,
+ LP5562_REG_W_PWM,
+ };
+
+ mutex_lock(&chip->lock);
+ lp55xx_write(chip, addr[led->chan_nr], led->brightness);
+ mutex_unlock(&chip->lock);
+}
+
+static void lp5562_write_program_memory(struct lp55xx_chip *chip,
+ u8 base, const u8 *rgb, int size)
+{
+ int i;
+
+ if (!rgb || size <= 0)
+ return;
+
+ for (i = 0; i < size; i++)
+ lp55xx_write(chip, base + i, *(rgb + i));
+
+ lp55xx_write(chip, base + i, 0);
+ lp55xx_write(chip, base + i + 1, 0);
+}
+
+/* check the size of program count */
+static inline bool _is_pc_overflow(struct lp55xx_predef_pattern *ptn)
+{
+ return ptn->size_r >= LP5562_PROGRAM_LENGTH ||
+ ptn->size_g >= LP5562_PROGRAM_LENGTH ||
+ ptn->size_b >= LP5562_PROGRAM_LENGTH;
+}
+
+static int lp5562_run_predef_led_pattern(struct lp55xx_chip *chip, int mode)
+{
+ struct lp55xx_predef_pattern *ptn;
+ int i;
+
+ if (mode == LP5562_PATTERN_OFF) {
+ lp5562_run_engine(chip, false);
+ return 0;
+ }
+
+ ptn = chip->pdata->patterns + (mode - 1);
+ if (!ptn || _is_pc_overflow(ptn)) {
+ dev_err(&chip->cl->dev, "invalid pattern data\n");
+ return -EINVAL;
+ }
+
+ lp5562_stop_engine(chip);
+
+ /* Set LED map as RGB */
+ lp55xx_write(chip, LP5562_REG_ENG_SEL, LP5562_ENG_SEL_RGB);
+
+ /* Load engines */
+ for (i = LP55XX_ENGINE_1; i <= LP55XX_ENGINE_3; i++) {
+ chip->engine_idx = i;
+ lp5562_load_engine(chip);
+ }
+
+ /* Clear program registers */
+ lp55xx_write(chip, LP5562_REG_PROG_MEM_ENG1, 0);
+ lp55xx_write(chip, LP5562_REG_PROG_MEM_ENG1 + 1, 0);
+ lp55xx_write(chip, LP5562_REG_PROG_MEM_ENG2, 0);
+ lp55xx_write(chip, LP5562_REG_PROG_MEM_ENG2 + 1, 0);
+ lp55xx_write(chip, LP5562_REG_PROG_MEM_ENG3, 0);
+ lp55xx_write(chip, LP5562_REG_PROG_MEM_ENG3 + 1, 0);
+
+ /* Program engines */
+ lp5562_write_program_memory(chip, LP5562_REG_PROG_MEM_ENG1,
+ ptn->r, ptn->size_r);
+ lp5562_write_program_memory(chip, LP5562_REG_PROG_MEM_ENG2,
+ ptn->g, ptn->size_g);
+ lp5562_write_program_memory(chip, LP5562_REG_PROG_MEM_ENG3,
+ ptn->b, ptn->size_b);
+
+ /* Run engines */
+ lp5562_run_engine(chip, true);
+
+ return 0;
+}
+
+static ssize_t lp5562_store_pattern(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t len)
+{
+ struct lp55xx_led *led = i2c_get_clientdata(to_i2c_client(dev));
+ struct lp55xx_chip *chip = led->chip;
+ struct lp55xx_predef_pattern *ptn = chip->pdata->patterns;
+ int num_patterns = chip->pdata->num_patterns;
+ unsigned long mode;
+ int ret;
+
+ ret = kstrtoul(buf, 0, &mode);
+ if (ret)
+ return ret;
+
+ if (mode > num_patterns || !ptn)
+ return -EINVAL;
+
+ mutex_lock(&chip->lock);
+ ret = lp5562_run_predef_led_pattern(chip, mode);
+ mutex_unlock(&chip->lock);
+
+ if (ret)
+ return ret;
+
+ return len;
+}
+
+static ssize_t lp5562_store_engine_mux(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t len)
+{
+ struct lp55xx_led *led = i2c_get_clientdata(to_i2c_client(dev));
+ struct lp55xx_chip *chip = led->chip;
+ u8 mask;
+ u8 val;
+
+ /* LED map
+ * R ... Engine 1 (fixed)
+ * G ... Engine 2 (fixed)
+ * B ... Engine 3 (fixed)
+ * W ... Engine 1 or 2 or 3
+ */
+
+ if (sysfs_streq(buf, "RGB")) {
+ mask = LP5562_ENG_FOR_RGB_M;
+ val = LP5562_ENG_SEL_RGB;
+ } else if (sysfs_streq(buf, "W")) {
+ enum lp55xx_engine_index idx = chip->engine_idx;
+
+ mask = LP5562_ENG_FOR_W_M;
+ switch (idx) {
+ case LP55XX_ENGINE_1:
+ val = LP5562_ENG1_FOR_W;
+ break;
+ case LP55XX_ENGINE_2:
+ val = LP5562_ENG2_FOR_W;
+ break;
+ case LP55XX_ENGINE_3:
+ val = LP5562_ENG3_FOR_W;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ } else {
+ dev_err(dev, "choose RGB or W\n");
+ return -EINVAL;
+ }
+
+ mutex_lock(&chip->lock);
+ lp55xx_update_bits(chip, LP5562_REG_ENG_SEL, mask, val);
+ mutex_unlock(&chip->lock);
+
+ return len;
+}
+
+static LP55XX_DEV_ATTR_WO(led_pattern, lp5562_store_pattern);
+static LP55XX_DEV_ATTR_WO(engine_mux, lp5562_store_engine_mux);
+
+static struct attribute *lp5562_attributes[] = {
+ &dev_attr_led_pattern.attr,
+ &dev_attr_engine_mux.attr,
+ NULL,
+};
+
+static const struct attribute_group lp5562_group = {
+ .attrs = lp5562_attributes,
+};
+
+/* Chip specific configurations */
+static struct lp55xx_device_config lp5562_cfg = {
+ .max_channel = LP5562_MAX_LEDS,
+ .reset = {
+ .addr = LP5562_REG_RESET,
+ .val = LP5562_RESET,
+ },
+ .enable = {
+ .addr = LP5562_REG_ENABLE,
+ .val = LP5562_ENABLE_DEFAULT,
+ },
+ .post_init_device = lp5562_post_init_device,
+ .set_led_current = lp5562_set_led_current,
+ .brightness_work_fn = lp5562_led_brightness_work,
+ .run_engine = lp5562_run_engine,
+ .firmware_cb = lp5562_firmware_loaded,
+ .dev_attr_group = &lp5562_group,
+};
+
+static int lp5562_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ int ret;
+ struct lp55xx_chip *chip;
+ struct lp55xx_led *led;
+ struct lp55xx_platform_data *pdata;
+ struct device_node *np = client->dev.of_node;
+
+ if (!dev_get_platdata(&client->dev)) {
+ if (np) {
+ ret = lp55xx_of_populate_pdata(&client->dev, np);
+ if (ret < 0)
+ return ret;
+ } else {
+ dev_err(&client->dev, "no platform data\n");
+ return -EINVAL;
+ }
+ }
+ pdata = dev_get_platdata(&client->dev);
+
+ chip = devm_kzalloc(&client->dev, sizeof(*chip), GFP_KERNEL);
+ if (!chip)
+ return -ENOMEM;
+
+ led = devm_kzalloc(&client->dev,
+ sizeof(*led) * pdata->num_channels, GFP_KERNEL);
+ if (!led)
+ return -ENOMEM;
+
+ chip->cl = client;
+ chip->pdata = pdata;
+ chip->cfg = &lp5562_cfg;
+
+ mutex_init(&chip->lock);
+
+ i2c_set_clientdata(client, led);
+
+ ret = lp55xx_init_device(chip);
+ if (ret)
+ goto err_init;
+
+ ret = lp55xx_register_leds(led, chip);
+ if (ret)
+ goto err_register_leds;
+
+ ret = lp55xx_register_sysfs(chip);
+ if (ret) {
+ dev_err(&client->dev, "registering sysfs failed\n");
+ goto err_register_sysfs;
+ }
+
+ return 0;
+
+err_register_sysfs:
+ lp55xx_unregister_leds(led, chip);
+err_register_leds:
+ lp55xx_deinit_device(chip);
+err_init:
+ return ret;
+}
+
+static int lp5562_remove(struct i2c_client *client)
+{
+ struct lp55xx_led *led = i2c_get_clientdata(client);
+ struct lp55xx_chip *chip = led->chip;
+
+ lp5562_stop_engine(chip);
+
+ lp55xx_unregister_sysfs(chip);
+ lp55xx_unregister_leds(led, chip);
+ lp55xx_deinit_device(chip);
+
+ return 0;
+}
+
+static const struct i2c_device_id lp5562_id[] = {
+ { "lp5562", 0 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, lp5562_id);
+
+#ifdef CONFIG_OF
+static const struct of_device_id of_lp5562_leds_match[] = {
+ { .compatible = "ti,lp5562", },
+ {},
+};
+
+MODULE_DEVICE_TABLE(of, of_lp5562_leds_match);
+#endif
+
+static struct i2c_driver lp5562_driver = {
+ .driver = {
+ .name = "lp5562",
+ .of_match_table = of_match_ptr(of_lp5562_leds_match),
+ },
+ .probe = lp5562_probe,
+ .remove = lp5562_remove,
+ .id_table = lp5562_id,
+};
+
+module_i2c_driver(lp5562_driver);
+
+MODULE_DESCRIPTION("Texas Instruments LP5562 LED Driver");
+MODULE_AUTHOR("Milo Kim");
+MODULE_LICENSE("GPL");
diff --git a/kernel/drivers/leds/leds-lp55xx-common.c b/kernel/drivers/leds/leds-lp55xx-common.c
new file mode 100644
index 000000000..77c26bc32
--- /dev/null
+++ b/kernel/drivers/leds/leds-lp55xx-common.c
@@ -0,0 +1,599 @@
+/*
+ * LP5521/LP5523/LP55231/LP5562 Common Driver
+ *
+ * Copyright 2012 Texas Instruments
+ *
+ * Author: Milo(Woogyom) Kim <milo.kim@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Derived from leds-lp5521.c, leds-lp5523.c
+ */
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/firmware.h>
+#include <linux/i2c.h>
+#include <linux/leds.h>
+#include <linux/module.h>
+#include <linux/platform_data/leds-lp55xx.h>
+#include <linux/slab.h>
+#include <linux/gpio.h>
+#include <linux/of_gpio.h>
+
+#include "leds-lp55xx-common.h"
+
+/* External clock rate */
+#define LP55XX_CLK_32K 32768
+
+static struct lp55xx_led *cdev_to_lp55xx_led(struct led_classdev *cdev)
+{
+ return container_of(cdev, struct lp55xx_led, cdev);
+}
+
+static struct lp55xx_led *dev_to_lp55xx_led(struct device *dev)
+{
+ return cdev_to_lp55xx_led(dev_get_drvdata(dev));
+}
+
+static void lp55xx_reset_device(struct lp55xx_chip *chip)
+{
+ struct lp55xx_device_config *cfg = chip->cfg;
+ u8 addr = cfg->reset.addr;
+ u8 val = cfg->reset.val;
+
+ /* no error checking here because no ACK from the device after reset */
+ lp55xx_write(chip, addr, val);
+}
+
+static int lp55xx_detect_device(struct lp55xx_chip *chip)
+{
+ struct lp55xx_device_config *cfg = chip->cfg;
+ u8 addr = cfg->enable.addr;
+ u8 val = cfg->enable.val;
+ int ret;
+
+ ret = lp55xx_write(chip, addr, val);
+ if (ret)
+ return ret;
+
+ usleep_range(1000, 2000);
+
+ ret = lp55xx_read(chip, addr, &val);
+ if (ret)
+ return ret;
+
+ if (val != cfg->enable.val)
+ return -ENODEV;
+
+ return 0;
+}
+
+static int lp55xx_post_init_device(struct lp55xx_chip *chip)
+{
+ struct lp55xx_device_config *cfg = chip->cfg;
+
+ if (!cfg->post_init_device)
+ return 0;
+
+ return cfg->post_init_device(chip);
+}
+
+static ssize_t lp55xx_show_current(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct lp55xx_led *led = dev_to_lp55xx_led(dev);
+
+ return scnprintf(buf, PAGE_SIZE, "%d\n", led->led_current);
+}
+
+static ssize_t lp55xx_store_current(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t len)
+{
+ struct lp55xx_led *led = dev_to_lp55xx_led(dev);
+ struct lp55xx_chip *chip = led->chip;
+ unsigned long curr;
+
+ if (kstrtoul(buf, 0, &curr))
+ return -EINVAL;
+
+ if (curr > led->max_current)
+ return -EINVAL;
+
+ if (!chip->cfg->set_led_current)
+ return len;
+
+ mutex_lock(&chip->lock);
+ chip->cfg->set_led_current(led, (u8)curr);
+ mutex_unlock(&chip->lock);
+
+ return len;
+}
+
+static ssize_t lp55xx_show_max_current(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct lp55xx_led *led = dev_to_lp55xx_led(dev);
+
+ return scnprintf(buf, PAGE_SIZE, "%d\n", led->max_current);
+}
+
+static DEVICE_ATTR(led_current, S_IRUGO | S_IWUSR, lp55xx_show_current,
+ lp55xx_store_current);
+static DEVICE_ATTR(max_current, S_IRUGO , lp55xx_show_max_current, NULL);
+
+static struct attribute *lp55xx_led_attrs[] = {
+ &dev_attr_led_current.attr,
+ &dev_attr_max_current.attr,
+ NULL,
+};
+ATTRIBUTE_GROUPS(lp55xx_led);
+
+static void lp55xx_set_brightness(struct led_classdev *cdev,
+ enum led_brightness brightness)
+{
+ struct lp55xx_led *led = cdev_to_lp55xx_led(cdev);
+
+ led->brightness = (u8)brightness;
+ schedule_work(&led->brightness_work);
+}
+
+static int lp55xx_init_led(struct lp55xx_led *led,
+ struct lp55xx_chip *chip, int chan)
+{
+ struct lp55xx_platform_data *pdata = chip->pdata;
+ struct lp55xx_device_config *cfg = chip->cfg;
+ struct device *dev = &chip->cl->dev;
+ char name[32];
+ int ret;
+ int max_channel = cfg->max_channel;
+
+ if (chan >= max_channel) {
+ dev_err(dev, "invalid channel: %d / %d\n", chan, max_channel);
+ return -EINVAL;
+ }
+
+ if (pdata->led_config[chan].led_current == 0)
+ return 0;
+
+ led->led_current = pdata->led_config[chan].led_current;
+ led->max_current = pdata->led_config[chan].max_current;
+ led->chan_nr = pdata->led_config[chan].chan_nr;
+ led->cdev.default_trigger = pdata->led_config[chan].default_trigger;
+
+ if (led->chan_nr >= max_channel) {
+ dev_err(dev, "Use channel numbers between 0 and %d\n",
+ max_channel - 1);
+ return -EINVAL;
+ }
+
+ led->cdev.brightness_set = lp55xx_set_brightness;
+ led->cdev.groups = lp55xx_led_groups;
+
+ if (pdata->led_config[chan].name) {
+ led->cdev.name = pdata->led_config[chan].name;
+ } else {
+ snprintf(name, sizeof(name), "%s:channel%d",
+ pdata->label ? : chip->cl->name, chan);
+ led->cdev.name = name;
+ }
+
+ ret = led_classdev_register(dev, &led->cdev);
+ if (ret) {
+ dev_err(dev, "led register err: %d\n", ret);
+ return ret;
+ }
+
+ return 0;
+}
+
+static void lp55xx_firmware_loaded(const struct firmware *fw, void *context)
+{
+ struct lp55xx_chip *chip = context;
+ struct device *dev = &chip->cl->dev;
+ enum lp55xx_engine_index idx = chip->engine_idx;
+
+ if (!fw) {
+ dev_err(dev, "firmware request failed\n");
+ goto out;
+ }
+
+ /* handling firmware data is chip dependent */
+ mutex_lock(&chip->lock);
+
+ chip->engines[idx - 1].mode = LP55XX_ENGINE_LOAD;
+ chip->fw = fw;
+ if (chip->cfg->firmware_cb)
+ chip->cfg->firmware_cb(chip);
+
+ mutex_unlock(&chip->lock);
+
+out:
+ /* firmware should be released for other channel use */
+ release_firmware(chip->fw);
+}
+
+static int lp55xx_request_firmware(struct lp55xx_chip *chip)
+{
+ const char *name = chip->cl->name;
+ struct device *dev = &chip->cl->dev;
+
+ return request_firmware_nowait(THIS_MODULE, true, name, dev,
+ GFP_KERNEL, chip, lp55xx_firmware_loaded);
+}
+
+static ssize_t lp55xx_show_engine_select(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct lp55xx_led *led = i2c_get_clientdata(to_i2c_client(dev));
+ struct lp55xx_chip *chip = led->chip;
+
+ return sprintf(buf, "%d\n", chip->engine_idx);
+}
+
+static ssize_t lp55xx_store_engine_select(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t len)
+{
+ struct lp55xx_led *led = i2c_get_clientdata(to_i2c_client(dev));
+ struct lp55xx_chip *chip = led->chip;
+ unsigned long val;
+ int ret;
+
+ if (kstrtoul(buf, 0, &val))
+ return -EINVAL;
+
+ /* select the engine to be run */
+
+ switch (val) {
+ case LP55XX_ENGINE_1:
+ case LP55XX_ENGINE_2:
+ case LP55XX_ENGINE_3:
+ mutex_lock(&chip->lock);
+ chip->engine_idx = val;
+ ret = lp55xx_request_firmware(chip);
+ mutex_unlock(&chip->lock);
+ break;
+ default:
+ dev_err(dev, "%lu: invalid engine index. (1, 2, 3)\n", val);
+ return -EINVAL;
+ }
+
+ if (ret) {
+ dev_err(dev, "request firmware err: %d\n", ret);
+ return ret;
+ }
+
+ return len;
+}
+
+static inline void lp55xx_run_engine(struct lp55xx_chip *chip, bool start)
+{
+ if (chip->cfg->run_engine)
+ chip->cfg->run_engine(chip, start);
+}
+
+static ssize_t lp55xx_store_engine_run(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t len)
+{
+ struct lp55xx_led *led = i2c_get_clientdata(to_i2c_client(dev));
+ struct lp55xx_chip *chip = led->chip;
+ unsigned long val;
+
+ if (kstrtoul(buf, 0, &val))
+ return -EINVAL;
+
+ /* run or stop the selected engine */
+
+ if (val <= 0) {
+ lp55xx_run_engine(chip, false);
+ return len;
+ }
+
+ mutex_lock(&chip->lock);
+ lp55xx_run_engine(chip, true);
+ mutex_unlock(&chip->lock);
+
+ return len;
+}
+
+static DEVICE_ATTR(select_engine, S_IRUGO | S_IWUSR,
+ lp55xx_show_engine_select, lp55xx_store_engine_select);
+static DEVICE_ATTR(run_engine, S_IWUSR, NULL, lp55xx_store_engine_run);
+
+static struct attribute *lp55xx_engine_attributes[] = {
+ &dev_attr_select_engine.attr,
+ &dev_attr_run_engine.attr,
+ NULL,
+};
+
+static const struct attribute_group lp55xx_engine_attr_group = {
+ .attrs = lp55xx_engine_attributes,
+};
+
+int lp55xx_write(struct lp55xx_chip *chip, u8 reg, u8 val)
+{
+ return i2c_smbus_write_byte_data(chip->cl, reg, val);
+}
+EXPORT_SYMBOL_GPL(lp55xx_write);
+
+int lp55xx_read(struct lp55xx_chip *chip, u8 reg, u8 *val)
+{
+ s32 ret;
+
+ ret = i2c_smbus_read_byte_data(chip->cl, reg);
+ if (ret < 0)
+ return ret;
+
+ *val = ret;
+ return 0;
+}
+EXPORT_SYMBOL_GPL(lp55xx_read);
+
+int lp55xx_update_bits(struct lp55xx_chip *chip, u8 reg, u8 mask, u8 val)
+{
+ int ret;
+ u8 tmp;
+
+ ret = lp55xx_read(chip, reg, &tmp);
+ if (ret)
+ return ret;
+
+ tmp &= ~mask;
+ tmp |= val & mask;
+
+ return lp55xx_write(chip, reg, tmp);
+}
+EXPORT_SYMBOL_GPL(lp55xx_update_bits);
+
+bool lp55xx_is_extclk_used(struct lp55xx_chip *chip)
+{
+ struct clk *clk;
+ int err;
+
+ clk = devm_clk_get(&chip->cl->dev, "32k_clk");
+ if (IS_ERR(clk))
+ goto use_internal_clk;
+
+ err = clk_prepare_enable(clk);
+ if (err)
+ goto use_internal_clk;
+
+ if (clk_get_rate(clk) != LP55XX_CLK_32K) {
+ clk_disable_unprepare(clk);
+ goto use_internal_clk;
+ }
+
+ dev_info(&chip->cl->dev, "%dHz external clock used\n", LP55XX_CLK_32K);
+
+ chip->clk = clk;
+ return true;
+
+use_internal_clk:
+ dev_info(&chip->cl->dev, "internal clock used\n");
+ return false;
+}
+EXPORT_SYMBOL_GPL(lp55xx_is_extclk_used);
+
+int lp55xx_init_device(struct lp55xx_chip *chip)
+{
+ struct lp55xx_platform_data *pdata;
+ struct lp55xx_device_config *cfg;
+ struct device *dev = &chip->cl->dev;
+ int ret = 0;
+
+ WARN_ON(!chip);
+
+ pdata = chip->pdata;
+ cfg = chip->cfg;
+
+ if (!pdata || !cfg)
+ return -EINVAL;
+
+ if (gpio_is_valid(pdata->enable_gpio)) {
+ ret = devm_gpio_request_one(dev, pdata->enable_gpio,
+ GPIOF_DIR_OUT, "lp5523_enable");
+ if (ret < 0) {
+ dev_err(dev, "could not acquire enable gpio (err=%d)\n",
+ ret);
+ goto err;
+ }
+
+ gpio_set_value(pdata->enable_gpio, 0);
+ usleep_range(1000, 2000); /* Keep enable down at least 1ms */
+ gpio_set_value(pdata->enable_gpio, 1);
+ usleep_range(1000, 2000); /* 500us abs min. */
+ }
+
+ lp55xx_reset_device(chip);
+
+ /*
+ * Exact value is not available. 10 - 20ms
+ * appears to be enough for reset.
+ */
+ usleep_range(10000, 20000);
+
+ ret = lp55xx_detect_device(chip);
+ if (ret) {
+ dev_err(dev, "device detection err: %d\n", ret);
+ goto err;
+ }
+
+ /* chip specific initialization */
+ ret = lp55xx_post_init_device(chip);
+ if (ret) {
+ dev_err(dev, "post init device err: %d\n", ret);
+ goto err_post_init;
+ }
+
+ return 0;
+
+err_post_init:
+ lp55xx_deinit_device(chip);
+err:
+ return ret;
+}
+EXPORT_SYMBOL_GPL(lp55xx_init_device);
+
+void lp55xx_deinit_device(struct lp55xx_chip *chip)
+{
+ struct lp55xx_platform_data *pdata = chip->pdata;
+
+ if (chip->clk)
+ clk_disable_unprepare(chip->clk);
+
+ if (gpio_is_valid(pdata->enable_gpio))
+ gpio_set_value(pdata->enable_gpio, 0);
+}
+EXPORT_SYMBOL_GPL(lp55xx_deinit_device);
+
+int lp55xx_register_leds(struct lp55xx_led *led, struct lp55xx_chip *chip)
+{
+ struct lp55xx_platform_data *pdata = chip->pdata;
+ struct lp55xx_device_config *cfg = chip->cfg;
+ int num_channels = pdata->num_channels;
+ struct lp55xx_led *each;
+ u8 led_current;
+ int ret;
+ int i;
+
+ if (!cfg->brightness_work_fn) {
+ dev_err(&chip->cl->dev, "empty brightness configuration\n");
+ return -EINVAL;
+ }
+
+ for (i = 0; i < num_channels; i++) {
+
+ /* do not initialize channels that are not connected */
+ if (pdata->led_config[i].led_current == 0)
+ continue;
+
+ led_current = pdata->led_config[i].led_current;
+ each = led + i;
+ ret = lp55xx_init_led(each, chip, i);
+ if (ret)
+ goto err_init_led;
+
+ INIT_WORK(&each->brightness_work, cfg->brightness_work_fn);
+
+ chip->num_leds++;
+ each->chip = chip;
+
+ /* setting led current at each channel */
+ if (cfg->set_led_current)
+ cfg->set_led_current(each, led_current);
+ }
+
+ return 0;
+
+err_init_led:
+ lp55xx_unregister_leds(led, chip);
+ return ret;
+}
+EXPORT_SYMBOL_GPL(lp55xx_register_leds);
+
+void lp55xx_unregister_leds(struct lp55xx_led *led, struct lp55xx_chip *chip)
+{
+ int i;
+ struct lp55xx_led *each;
+
+ for (i = 0; i < chip->num_leds; i++) {
+ each = led + i;
+ led_classdev_unregister(&each->cdev);
+ flush_work(&each->brightness_work);
+ }
+}
+EXPORT_SYMBOL_GPL(lp55xx_unregister_leds);
+
+int lp55xx_register_sysfs(struct lp55xx_chip *chip)
+{
+ struct device *dev = &chip->cl->dev;
+ struct lp55xx_device_config *cfg = chip->cfg;
+ int ret;
+
+ if (!cfg->run_engine || !cfg->firmware_cb)
+ goto dev_specific_attrs;
+
+ ret = sysfs_create_group(&dev->kobj, &lp55xx_engine_attr_group);
+ if (ret)
+ return ret;
+
+dev_specific_attrs:
+ return cfg->dev_attr_group ?
+ sysfs_create_group(&dev->kobj, cfg->dev_attr_group) : 0;
+}
+EXPORT_SYMBOL_GPL(lp55xx_register_sysfs);
+
+void lp55xx_unregister_sysfs(struct lp55xx_chip *chip)
+{
+ struct device *dev = &chip->cl->dev;
+ struct lp55xx_device_config *cfg = chip->cfg;
+
+ if (cfg->dev_attr_group)
+ sysfs_remove_group(&dev->kobj, cfg->dev_attr_group);
+
+ sysfs_remove_group(&dev->kobj, &lp55xx_engine_attr_group);
+}
+EXPORT_SYMBOL_GPL(lp55xx_unregister_sysfs);
+
+int lp55xx_of_populate_pdata(struct device *dev, struct device_node *np)
+{
+ struct device_node *child;
+ struct lp55xx_platform_data *pdata;
+ struct lp55xx_led_config *cfg;
+ int num_channels;
+ int i = 0;
+
+ pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL);
+ if (!pdata)
+ return -ENOMEM;
+
+ num_channels = of_get_child_count(np);
+ if (num_channels == 0) {
+ dev_err(dev, "no LED channels\n");
+ return -EINVAL;
+ }
+
+ cfg = devm_kzalloc(dev, sizeof(*cfg) * num_channels, GFP_KERNEL);
+ if (!cfg)
+ return -ENOMEM;
+
+ pdata->led_config = &cfg[0];
+ pdata->num_channels = num_channels;
+
+ for_each_child_of_node(np, child) {
+ cfg[i].chan_nr = i;
+
+ of_property_read_string(child, "chan-name", &cfg[i].name);
+ of_property_read_u8(child, "led-cur", &cfg[i].led_current);
+ of_property_read_u8(child, "max-cur", &cfg[i].max_current);
+ cfg[i].default_trigger =
+ of_get_property(child, "linux,default-trigger", NULL);
+
+ i++;
+ }
+
+ of_property_read_string(np, "label", &pdata->label);
+ of_property_read_u8(np, "clock-mode", &pdata->clock_mode);
+
+ pdata->enable_gpio = of_get_named_gpio(np, "enable-gpio", 0);
+
+ /* LP8501 specific */
+ of_property_read_u8(np, "pwr-sel", (u8 *)&pdata->pwr_sel);
+
+ dev->platform_data = pdata;
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(lp55xx_of_populate_pdata);
+
+MODULE_AUTHOR("Milo Kim <milo.kim@ti.com>");
+MODULE_DESCRIPTION("LP55xx Common Driver");
+MODULE_LICENSE("GPL");
diff --git a/kernel/drivers/leds/leds-lp55xx-common.h b/kernel/drivers/leds/leds-lp55xx-common.h
new file mode 100644
index 000000000..cceab483e
--- /dev/null
+++ b/kernel/drivers/leds/leds-lp55xx-common.h
@@ -0,0 +1,208 @@
+/*
+ * LP55XX Common Driver Header
+ *
+ * Copyright (C) 2012 Texas Instruments
+ *
+ * Author: Milo(Woogyom) Kim <milo.kim@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * Derived from leds-lp5521.c, leds-lp5523.c
+ */
+
+#ifndef _LEDS_LP55XX_COMMON_H
+#define _LEDS_LP55XX_COMMON_H
+
+enum lp55xx_engine_index {
+ LP55XX_ENGINE_INVALID,
+ LP55XX_ENGINE_1,
+ LP55XX_ENGINE_2,
+ LP55XX_ENGINE_3,
+ LP55XX_ENGINE_MAX = LP55XX_ENGINE_3,
+};
+
+enum lp55xx_engine_mode {
+ LP55XX_ENGINE_DISABLED,
+ LP55XX_ENGINE_LOAD,
+ LP55XX_ENGINE_RUN,
+};
+
+#define LP55XX_DEV_ATTR_RW(name, show, store) \
+ DEVICE_ATTR(name, S_IRUGO | S_IWUSR, show, store)
+#define LP55XX_DEV_ATTR_RO(name, show) \
+ DEVICE_ATTR(name, S_IRUGO, show, NULL)
+#define LP55XX_DEV_ATTR_WO(name, store) \
+ DEVICE_ATTR(name, S_IWUSR, NULL, store)
+
+#define show_mode(nr) \
+static ssize_t show_engine##nr##_mode(struct device *dev, \
+ struct device_attribute *attr, \
+ char *buf) \
+{ \
+ return show_engine_mode(dev, attr, buf, nr); \
+}
+
+#define store_mode(nr) \
+static ssize_t store_engine##nr##_mode(struct device *dev, \
+ struct device_attribute *attr, \
+ const char *buf, size_t len) \
+{ \
+ return store_engine_mode(dev, attr, buf, len, nr); \
+}
+
+#define show_leds(nr) \
+static ssize_t show_engine##nr##_leds(struct device *dev, \
+ struct device_attribute *attr, \
+ char *buf) \
+{ \
+ return show_engine_leds(dev, attr, buf, nr); \
+}
+
+#define store_leds(nr) \
+static ssize_t store_engine##nr##_leds(struct device *dev, \
+ struct device_attribute *attr, \
+ const char *buf, size_t len) \
+{ \
+ return store_engine_leds(dev, attr, buf, len, nr); \
+}
+
+#define store_load(nr) \
+static ssize_t store_engine##nr##_load(struct device *dev, \
+ struct device_attribute *attr, \
+ const char *buf, size_t len) \
+{ \
+ return store_engine_load(dev, attr, buf, len, nr); \
+}
+
+struct lp55xx_led;
+struct lp55xx_chip;
+
+/*
+ * struct lp55xx_reg
+ * @addr : Register address
+ * @val : Register value
+ */
+struct lp55xx_reg {
+ u8 addr;
+ u8 val;
+};
+
+/*
+ * struct lp55xx_device_config
+ * @reset : Chip specific reset command
+ * @enable : Chip specific enable command
+ * @max_channel : Maximum number of channels
+ * @post_init_device : Chip specific initialization code
+ * @brightness_work_fn : Brightness work function
+ * @set_led_current : LED current set function
+ * @firmware_cb : Call function when the firmware is loaded
+ * @run_engine : Run internal engine for pattern
+ * @dev_attr_group : Device specific attributes
+ */
+struct lp55xx_device_config {
+ const struct lp55xx_reg reset;
+ const struct lp55xx_reg enable;
+ const int max_channel;
+
+ /* define if the device has specific initialization process */
+ int (*post_init_device) (struct lp55xx_chip *chip);
+
+ /* access brightness register */
+ void (*brightness_work_fn)(struct work_struct *work);
+
+ /* current setting function */
+ void (*set_led_current) (struct lp55xx_led *led, u8 led_current);
+
+ /* access program memory when the firmware is loaded */
+ void (*firmware_cb)(struct lp55xx_chip *chip);
+
+ /* used for running firmware LED patterns */
+ void (*run_engine) (struct lp55xx_chip *chip, bool start);
+
+ /* additional device specific attributes */
+ const struct attribute_group *dev_attr_group;
+};
+
+/*
+ * struct lp55xx_engine
+ * @mode : Engine mode
+ * @led_mux : Mux bits for LED selection. Only used in LP5523
+ */
+struct lp55xx_engine {
+ enum lp55xx_engine_mode mode;
+ u16 led_mux;
+};
+
+/*
+ * struct lp55xx_chip
+ * @cl : I2C communication for access registers
+ * @pdata : Platform specific data
+ * @lock : Lock for user-space interface
+ * @num_leds : Number of registered LEDs
+ * @cfg : Device specific configuration data
+ * @engine_idx : Selected engine number
+ * @engines : Engine structure for the device attribute R/W interface
+ * @fw : Firmware data for running a LED pattern
+ */
+struct lp55xx_chip {
+ struct i2c_client *cl;
+ struct clk *clk;
+ struct lp55xx_platform_data *pdata;
+ struct mutex lock; /* lock for user-space interface */
+ int num_leds;
+ struct lp55xx_device_config *cfg;
+ enum lp55xx_engine_index engine_idx;
+ struct lp55xx_engine engines[LP55XX_ENGINE_MAX];
+ const struct firmware *fw;
+};
+
+/*
+ * struct lp55xx_led
+ * @chan_nr : Channel number
+ * @cdev : LED class device
+ * @led_current : Current setting at each led channel
+ * @max_current : Maximun current at each led channel
+ * @brightness_work : Workqueue for brightness control
+ * @brightness : Brightness value
+ * @chip : The lp55xx chip data
+ */
+struct lp55xx_led {
+ int chan_nr;
+ struct led_classdev cdev;
+ u8 led_current;
+ u8 max_current;
+ struct work_struct brightness_work;
+ u8 brightness;
+ struct lp55xx_chip *chip;
+};
+
+/* register access */
+extern int lp55xx_write(struct lp55xx_chip *chip, u8 reg, u8 val);
+extern int lp55xx_read(struct lp55xx_chip *chip, u8 reg, u8 *val);
+extern int lp55xx_update_bits(struct lp55xx_chip *chip, u8 reg,
+ u8 mask, u8 val);
+
+/* external clock detection */
+extern bool lp55xx_is_extclk_used(struct lp55xx_chip *chip);
+
+/* common device init/deinit functions */
+extern int lp55xx_init_device(struct lp55xx_chip *chip);
+extern void lp55xx_deinit_device(struct lp55xx_chip *chip);
+
+/* common LED class device functions */
+extern int lp55xx_register_leds(struct lp55xx_led *led,
+ struct lp55xx_chip *chip);
+extern void lp55xx_unregister_leds(struct lp55xx_led *led,
+ struct lp55xx_chip *chip);
+
+/* common device attributes functions */
+extern int lp55xx_register_sysfs(struct lp55xx_chip *chip);
+extern void lp55xx_unregister_sysfs(struct lp55xx_chip *chip);
+
+/* common device tree population function */
+extern int lp55xx_of_populate_pdata(struct device *dev,
+ struct device_node *np);
+
+#endif /* _LEDS_LP55XX_COMMON_H */
diff --git a/kernel/drivers/leds/leds-lp8501.c b/kernel/drivers/leds/leds-lp8501.c
new file mode 100644
index 000000000..d3098e395
--- /dev/null
+++ b/kernel/drivers/leds/leds-lp8501.c
@@ -0,0 +1,411 @@
+/*
+ * TI LP8501 9 channel LED Driver
+ *
+ * Copyright (C) 2013 Texas Instruments
+ *
+ * Author: Milo(Woogyom) Kim <milo.kim@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/delay.h>
+#include <linux/firmware.h>
+#include <linux/i2c.h>
+#include <linux/init.h>
+#include <linux/leds.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/of.h>
+#include <linux/platform_data/leds-lp55xx.h>
+#include <linux/slab.h>
+
+#include "leds-lp55xx-common.h"
+
+#define LP8501_PROGRAM_LENGTH 32
+#define LP8501_MAX_LEDS 9
+
+/* Registers */
+#define LP8501_REG_ENABLE 0x00
+#define LP8501_ENABLE BIT(6)
+#define LP8501_EXEC_M 0x3F
+#define LP8501_EXEC_ENG1_M 0x30
+#define LP8501_EXEC_ENG2_M 0x0C
+#define LP8501_EXEC_ENG3_M 0x03
+#define LP8501_RUN_ENG1 0x20
+#define LP8501_RUN_ENG2 0x08
+#define LP8501_RUN_ENG3 0x02
+
+#define LP8501_REG_OP_MODE 0x01
+#define LP8501_MODE_ENG1_M 0x30
+#define LP8501_MODE_ENG2_M 0x0C
+#define LP8501_MODE_ENG3_M 0x03
+#define LP8501_LOAD_ENG1 0x10
+#define LP8501_LOAD_ENG2 0x04
+#define LP8501_LOAD_ENG3 0x01
+
+#define LP8501_REG_PWR_CONFIG 0x05
+#define LP8501_PWR_CONFIG_M 0x03
+
+#define LP8501_REG_LED_PWM_BASE 0x16
+
+#define LP8501_REG_LED_CURRENT_BASE 0x26
+
+#define LP8501_REG_CONFIG 0x36
+#define LP8501_PWM_PSAVE BIT(7)
+#define LP8501_AUTO_INC BIT(6)
+#define LP8501_PWR_SAVE BIT(5)
+#define LP8501_CP_AUTO 0x18
+#define LP8501_INT_CLK BIT(0)
+#define LP8501_DEFAULT_CFG \
+ (LP8501_PWM_PSAVE | LP8501_AUTO_INC | LP8501_PWR_SAVE | LP8501_CP_AUTO)
+
+#define LP8501_REG_RESET 0x3D
+#define LP8501_RESET 0xFF
+
+#define LP8501_REG_PROG_PAGE_SEL 0x4F
+#define LP8501_PAGE_ENG1 0
+#define LP8501_PAGE_ENG2 1
+#define LP8501_PAGE_ENG3 2
+
+#define LP8501_REG_PROG_MEM 0x50
+
+#define LP8501_ENG1_IS_LOADING(mode) \
+ ((mode & LP8501_MODE_ENG1_M) == LP8501_LOAD_ENG1)
+#define LP8501_ENG2_IS_LOADING(mode) \
+ ((mode & LP8501_MODE_ENG2_M) == LP8501_LOAD_ENG2)
+#define LP8501_ENG3_IS_LOADING(mode) \
+ ((mode & LP8501_MODE_ENG3_M) == LP8501_LOAD_ENG3)
+
+static inline void lp8501_wait_opmode_done(void)
+{
+ usleep_range(1000, 2000);
+}
+
+static void lp8501_set_led_current(struct lp55xx_led *led, u8 led_current)
+{
+ led->led_current = led_current;
+ lp55xx_write(led->chip, LP8501_REG_LED_CURRENT_BASE + led->chan_nr,
+ led_current);
+}
+
+static int lp8501_post_init_device(struct lp55xx_chip *chip)
+{
+ int ret;
+ u8 val = LP8501_DEFAULT_CFG;
+
+ ret = lp55xx_write(chip, LP8501_REG_ENABLE, LP8501_ENABLE);
+ if (ret)
+ return ret;
+
+ /* Chip startup time is 500 us, 1 - 2 ms gives some margin */
+ usleep_range(1000, 2000);
+
+ if (chip->pdata->clock_mode != LP55XX_CLOCK_EXT)
+ val |= LP8501_INT_CLK;
+
+ ret = lp55xx_write(chip, LP8501_REG_CONFIG, val);
+ if (ret)
+ return ret;
+
+ /* Power selection for each output */
+ return lp55xx_update_bits(chip, LP8501_REG_PWR_CONFIG,
+ LP8501_PWR_CONFIG_M, chip->pdata->pwr_sel);
+}
+
+static void lp8501_load_engine(struct lp55xx_chip *chip)
+{
+ enum lp55xx_engine_index idx = chip->engine_idx;
+ u8 mask[] = {
+ [LP55XX_ENGINE_1] = LP8501_MODE_ENG1_M,
+ [LP55XX_ENGINE_2] = LP8501_MODE_ENG2_M,
+ [LP55XX_ENGINE_3] = LP8501_MODE_ENG3_M,
+ };
+
+ u8 val[] = {
+ [LP55XX_ENGINE_1] = LP8501_LOAD_ENG1,
+ [LP55XX_ENGINE_2] = LP8501_LOAD_ENG2,
+ [LP55XX_ENGINE_3] = LP8501_LOAD_ENG3,
+ };
+
+ u8 page_sel[] = {
+ [LP55XX_ENGINE_1] = LP8501_PAGE_ENG1,
+ [LP55XX_ENGINE_2] = LP8501_PAGE_ENG2,
+ [LP55XX_ENGINE_3] = LP8501_PAGE_ENG3,
+ };
+
+ lp55xx_update_bits(chip, LP8501_REG_OP_MODE, mask[idx], val[idx]);
+
+ lp8501_wait_opmode_done();
+
+ lp55xx_write(chip, LP8501_REG_PROG_PAGE_SEL, page_sel[idx]);
+}
+
+static void lp8501_stop_engine(struct lp55xx_chip *chip)
+{
+ lp55xx_write(chip, LP8501_REG_OP_MODE, 0);
+ lp8501_wait_opmode_done();
+}
+
+static void lp8501_turn_off_channels(struct lp55xx_chip *chip)
+{
+ int i;
+
+ for (i = 0; i < LP8501_MAX_LEDS; i++)
+ lp55xx_write(chip, LP8501_REG_LED_PWM_BASE + i, 0);
+}
+
+static void lp8501_run_engine(struct lp55xx_chip *chip, bool start)
+{
+ int ret;
+ u8 mode;
+ u8 exec;
+
+ /* stop engine */
+ if (!start) {
+ lp8501_stop_engine(chip);
+ lp8501_turn_off_channels(chip);
+ return;
+ }
+
+ /*
+ * To run the engine,
+ * operation mode and enable register should updated at the same time
+ */
+
+ ret = lp55xx_read(chip, LP8501_REG_OP_MODE, &mode);
+ if (ret)
+ return;
+
+ ret = lp55xx_read(chip, LP8501_REG_ENABLE, &exec);
+ if (ret)
+ return;
+
+ /* change operation mode to RUN only when each engine is loading */
+ if (LP8501_ENG1_IS_LOADING(mode)) {
+ mode = (mode & ~LP8501_MODE_ENG1_M) | LP8501_RUN_ENG1;
+ exec = (exec & ~LP8501_EXEC_ENG1_M) | LP8501_RUN_ENG1;
+ }
+
+ if (LP8501_ENG2_IS_LOADING(mode)) {
+ mode = (mode & ~LP8501_MODE_ENG2_M) | LP8501_RUN_ENG2;
+ exec = (exec & ~LP8501_EXEC_ENG2_M) | LP8501_RUN_ENG2;
+ }
+
+ if (LP8501_ENG3_IS_LOADING(mode)) {
+ mode = (mode & ~LP8501_MODE_ENG3_M) | LP8501_RUN_ENG3;
+ exec = (exec & ~LP8501_EXEC_ENG3_M) | LP8501_RUN_ENG3;
+ }
+
+ lp55xx_write(chip, LP8501_REG_OP_MODE, mode);
+ lp8501_wait_opmode_done();
+
+ lp55xx_update_bits(chip, LP8501_REG_ENABLE, LP8501_EXEC_M, exec);
+}
+
+static int lp8501_update_program_memory(struct lp55xx_chip *chip,
+ const u8 *data, size_t size)
+{
+ u8 pattern[LP8501_PROGRAM_LENGTH] = {0};
+ unsigned cmd;
+ char c[3];
+ int update_size;
+ int nrchars;
+ int offset = 0;
+ int ret;
+ int i;
+
+ /* clear program memory before updating */
+ for (i = 0; i < LP8501_PROGRAM_LENGTH; i++)
+ lp55xx_write(chip, LP8501_REG_PROG_MEM + i, 0);
+
+ i = 0;
+ while ((offset < size - 1) && (i < LP8501_PROGRAM_LENGTH)) {
+ /* separate sscanfs because length is working only for %s */
+ ret = sscanf(data + offset, "%2s%n ", c, &nrchars);
+ if (ret != 1)
+ goto err;
+
+ ret = sscanf(c, "%2x", &cmd);
+ if (ret != 1)
+ goto err;
+
+ pattern[i] = (u8)cmd;
+ offset += nrchars;
+ i++;
+ }
+
+ /* Each instruction is 16bit long. Check that length is even */
+ if (i % 2)
+ goto err;
+
+ update_size = i;
+ for (i = 0; i < update_size; i++)
+ lp55xx_write(chip, LP8501_REG_PROG_MEM + i, pattern[i]);
+
+ return 0;
+
+err:
+ dev_err(&chip->cl->dev, "wrong pattern format\n");
+ return -EINVAL;
+}
+
+static void lp8501_firmware_loaded(struct lp55xx_chip *chip)
+{
+ const struct firmware *fw = chip->fw;
+
+ if (fw->size > LP8501_PROGRAM_LENGTH) {
+ dev_err(&chip->cl->dev, "firmware data size overflow: %zu\n",
+ fw->size);
+ return;
+ }
+
+ /*
+ * Program memory sequence
+ * 1) set engine mode to "LOAD"
+ * 2) write firmware data into program memory
+ */
+
+ lp8501_load_engine(chip);
+ lp8501_update_program_memory(chip, fw->data, fw->size);
+}
+
+static void lp8501_led_brightness_work(struct work_struct *work)
+{
+ struct lp55xx_led *led = container_of(work, struct lp55xx_led,
+ brightness_work);
+ struct lp55xx_chip *chip = led->chip;
+
+ mutex_lock(&chip->lock);
+ lp55xx_write(chip, LP8501_REG_LED_PWM_BASE + led->chan_nr,
+ led->brightness);
+ mutex_unlock(&chip->lock);
+}
+
+/* Chip specific configurations */
+static struct lp55xx_device_config lp8501_cfg = {
+ .reset = {
+ .addr = LP8501_REG_RESET,
+ .val = LP8501_RESET,
+ },
+ .enable = {
+ .addr = LP8501_REG_ENABLE,
+ .val = LP8501_ENABLE,
+ },
+ .max_channel = LP8501_MAX_LEDS,
+ .post_init_device = lp8501_post_init_device,
+ .brightness_work_fn = lp8501_led_brightness_work,
+ .set_led_current = lp8501_set_led_current,
+ .firmware_cb = lp8501_firmware_loaded,
+ .run_engine = lp8501_run_engine,
+};
+
+static int lp8501_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ int ret;
+ struct lp55xx_chip *chip;
+ struct lp55xx_led *led;
+ struct lp55xx_platform_data *pdata;
+ struct device_node *np = client->dev.of_node;
+
+ if (!dev_get_platdata(&client->dev)) {
+ if (np) {
+ ret = lp55xx_of_populate_pdata(&client->dev, np);
+ if (ret < 0)
+ return ret;
+ } else {
+ dev_err(&client->dev, "no platform data\n");
+ return -EINVAL;
+ }
+ }
+ pdata = dev_get_platdata(&client->dev);
+
+ chip = devm_kzalloc(&client->dev, sizeof(*chip), GFP_KERNEL);
+ if (!chip)
+ return -ENOMEM;
+
+ led = devm_kzalloc(&client->dev,
+ sizeof(*led) * pdata->num_channels, GFP_KERNEL);
+ if (!led)
+ return -ENOMEM;
+
+ chip->cl = client;
+ chip->pdata = pdata;
+ chip->cfg = &lp8501_cfg;
+
+ mutex_init(&chip->lock);
+
+ i2c_set_clientdata(client, led);
+
+ ret = lp55xx_init_device(chip);
+ if (ret)
+ goto err_init;
+
+ dev_info(&client->dev, "%s Programmable led chip found\n", id->name);
+
+ ret = lp55xx_register_leds(led, chip);
+ if (ret)
+ goto err_register_leds;
+
+ ret = lp55xx_register_sysfs(chip);
+ if (ret) {
+ dev_err(&client->dev, "registering sysfs failed\n");
+ goto err_register_sysfs;
+ }
+
+ return 0;
+
+err_register_sysfs:
+ lp55xx_unregister_leds(led, chip);
+err_register_leds:
+ lp55xx_deinit_device(chip);
+err_init:
+ return ret;
+}
+
+static int lp8501_remove(struct i2c_client *client)
+{
+ struct lp55xx_led *led = i2c_get_clientdata(client);
+ struct lp55xx_chip *chip = led->chip;
+
+ lp8501_stop_engine(chip);
+ lp55xx_unregister_sysfs(chip);
+ lp55xx_unregister_leds(led, chip);
+ lp55xx_deinit_device(chip);
+
+ return 0;
+}
+
+static const struct i2c_device_id lp8501_id[] = {
+ { "lp8501", 0 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, lp8501_id);
+
+#ifdef CONFIG_OF
+static const struct of_device_id of_lp8501_leds_match[] = {
+ { .compatible = "ti,lp8501", },
+ {},
+};
+
+MODULE_DEVICE_TABLE(of, of_lp8501_leds_match);
+#endif
+
+static struct i2c_driver lp8501_driver = {
+ .driver = {
+ .name = "lp8501",
+ .of_match_table = of_match_ptr(of_lp8501_leds_match),
+ },
+ .probe = lp8501_probe,
+ .remove = lp8501_remove,
+ .id_table = lp8501_id,
+};
+
+module_i2c_driver(lp8501_driver);
+
+MODULE_DESCRIPTION("Texas Instruments LP8501 LED driver");
+MODULE_AUTHOR("Milo Kim");
+MODULE_LICENSE("GPL");
diff --git a/kernel/drivers/leds/leds-lp8788.c b/kernel/drivers/leds/leds-lp8788.c
new file mode 100644
index 000000000..3409f03c1
--- /dev/null
+++ b/kernel/drivers/leds/leds-lp8788.c
@@ -0,0 +1,193 @@
+/*
+ * TI LP8788 MFD - keyled driver
+ *
+ * Copyright 2012 Texas Instruments
+ *
+ * Author: Milo(Woogyom) Kim <milo.kim@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/err.h>
+#include <linux/platform_device.h>
+#include <linux/leds.h>
+#include <linux/mutex.h>
+#include <linux/mfd/lp8788.h>
+#include <linux/mfd/lp8788-isink.h>
+
+#define MAX_BRIGHTNESS LP8788_ISINK_MAX_PWM
+#define DEFAULT_LED_NAME "keyboard-backlight"
+
+struct lp8788_led {
+ struct lp8788 *lp;
+ struct mutex lock;
+ struct work_struct work;
+ struct led_classdev led_dev;
+ enum lp8788_isink_number isink_num;
+ enum led_brightness brightness;
+ int on;
+};
+
+struct lp8788_led_config {
+ enum lp8788_isink_scale scale;
+ enum lp8788_isink_number num;
+ int iout;
+};
+
+static struct lp8788_led_config default_led_config = {
+ .scale = LP8788_ISINK_SCALE_100mA,
+ .num = LP8788_ISINK_3,
+ .iout = 0,
+};
+
+static int lp8788_led_init_device(struct lp8788_led *led,
+ struct lp8788_led_platform_data *pdata)
+{
+ struct lp8788_led_config *cfg = &default_led_config;
+ u8 addr, mask, val;
+ int ret;
+
+ if (pdata) {
+ cfg->scale = pdata->scale;
+ cfg->num = pdata->num;
+ cfg->iout = pdata->iout_code;
+ }
+
+ led->isink_num = cfg->num;
+
+ /* scale configuration */
+ addr = LP8788_ISINK_CTRL;
+ mask = 1 << (cfg->num + LP8788_ISINK_SCALE_OFFSET);
+ val = cfg->scale << (cfg->num + LP8788_ISINK_SCALE_OFFSET);
+ ret = lp8788_update_bits(led->lp, addr, mask, val);
+ if (ret)
+ return ret;
+
+ /* current configuration */
+ addr = lp8788_iout_addr[cfg->num];
+ mask = lp8788_iout_mask[cfg->num];
+ val = cfg->iout;
+
+ return lp8788_update_bits(led->lp, addr, mask, val);
+}
+
+static void lp8788_led_enable(struct lp8788_led *led,
+ enum lp8788_isink_number num, int on)
+{
+ u8 mask = 1 << num;
+ u8 val = on << num;
+
+ if (lp8788_update_bits(led->lp, LP8788_ISINK_CTRL, mask, val))
+ return;
+
+ led->on = on;
+}
+
+static void lp8788_led_work(struct work_struct *work)
+{
+ struct lp8788_led *led = container_of(work, struct lp8788_led, work);
+ enum lp8788_isink_number num = led->isink_num;
+ int enable;
+ u8 val = led->brightness;
+
+ mutex_lock(&led->lock);
+
+ switch (num) {
+ case LP8788_ISINK_1:
+ case LP8788_ISINK_2:
+ case LP8788_ISINK_3:
+ lp8788_write_byte(led->lp, lp8788_pwm_addr[num], val);
+ break;
+ default:
+ mutex_unlock(&led->lock);
+ return;
+ }
+
+ enable = (val > 0) ? 1 : 0;
+ if (enable != led->on)
+ lp8788_led_enable(led, num, enable);
+
+ mutex_unlock(&led->lock);
+}
+
+static void lp8788_brightness_set(struct led_classdev *led_cdev,
+ enum led_brightness brt_val)
+{
+ struct lp8788_led *led =
+ container_of(led_cdev, struct lp8788_led, led_dev);
+
+ led->brightness = brt_val;
+ schedule_work(&led->work);
+}
+
+static int lp8788_led_probe(struct platform_device *pdev)
+{
+ struct lp8788 *lp = dev_get_drvdata(pdev->dev.parent);
+ struct lp8788_led_platform_data *led_pdata;
+ struct lp8788_led *led;
+ struct device *dev = &pdev->dev;
+ int ret;
+
+ led = devm_kzalloc(dev, sizeof(struct lp8788_led), GFP_KERNEL);
+ if (!led)
+ return -ENOMEM;
+
+ led->lp = lp;
+ led->led_dev.max_brightness = MAX_BRIGHTNESS;
+ led->led_dev.brightness_set = lp8788_brightness_set;
+
+ led_pdata = lp->pdata ? lp->pdata->led_pdata : NULL;
+
+ if (!led_pdata || !led_pdata->name)
+ led->led_dev.name = DEFAULT_LED_NAME;
+ else
+ led->led_dev.name = led_pdata->name;
+
+ mutex_init(&led->lock);
+ INIT_WORK(&led->work, lp8788_led_work);
+
+ platform_set_drvdata(pdev, led);
+
+ ret = lp8788_led_init_device(led, led_pdata);
+ if (ret) {
+ dev_err(dev, "led init device err: %d\n", ret);
+ return ret;
+ }
+
+ ret = led_classdev_register(dev, &led->led_dev);
+ if (ret) {
+ dev_err(dev, "led register err: %d\n", ret);
+ return ret;
+ }
+
+ return 0;
+}
+
+static int lp8788_led_remove(struct platform_device *pdev)
+{
+ struct lp8788_led *led = platform_get_drvdata(pdev);
+
+ led_classdev_unregister(&led->led_dev);
+ flush_work(&led->work);
+
+ return 0;
+}
+
+static struct platform_driver lp8788_led_driver = {
+ .probe = lp8788_led_probe,
+ .remove = lp8788_led_remove,
+ .driver = {
+ .name = LP8788_DEV_KEYLED,
+ },
+};
+module_platform_driver(lp8788_led_driver);
+
+MODULE_DESCRIPTION("Texas Instruments LP8788 Keyboard LED Driver");
+MODULE_AUTHOR("Milo Kim");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:lp8788-keyled");
diff --git a/kernel/drivers/leds/leds-lp8860.c b/kernel/drivers/leds/leds-lp8860.c
new file mode 100644
index 000000000..8c2b7fbe2
--- /dev/null
+++ b/kernel/drivers/leds/leds-lp8860.c
@@ -0,0 +1,493 @@
+/*
+ * TI LP8860 4-Channel LED Driver
+ *
+ * Copyright (C) 2014 Texas Instruments
+ *
+ * Author: Dan Murphy <dmurphy@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/i2c.h>
+#include <linux/init.h>
+#include <linux/leds.h>
+#include <linux/regmap.h>
+#include <linux/regulator/consumer.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/of.h>
+#include <linux/of_gpio.h>
+#include <linux/gpio/consumer.h>
+#include <linux/slab.h>
+
+#define LP8860_DISP_CL1_BRT_MSB 0x00
+#define LP8860_DISP_CL1_BRT_LSB 0x01
+#define LP8860_DISP_CL1_CURR_MSB 0x02
+#define LP8860_DISP_CL1_CURR_LSB 0x03
+#define LP8860_CL2_BRT_MSB 0x04
+#define LP8860_CL2_BRT_LSB 0x05
+#define LP8860_CL2_CURRENT 0x06
+#define LP8860_CL3_BRT_MSB 0x07
+#define LP8860_CL3_BRT_LSB 0x08
+#define LP8860_CL3_CURRENT 0x09
+#define LP8860_CL4_BRT_MSB 0x0a
+#define LP8860_CL4_BRT_LSB 0x0b
+#define LP8860_CL4_CURRENT 0x0c
+#define LP8860_CONFIG 0x0d
+#define LP8860_STATUS 0x0e
+#define LP8860_FAULT 0x0f
+#define LP8860_LED_FAULT 0x10
+#define LP8860_FAULT_CLEAR 0x11
+#define LP8860_ID 0x12
+#define LP8860_TEMP_MSB 0x13
+#define LP8860_TEMP_LSB 0x14
+#define LP8860_DISP_LED_CURR_MSB 0x15
+#define LP8860_DISP_LED_CURR_LSB 0x16
+#define LP8860_DISP_LED_PWM_MSB 0x17
+#define LP8860_DISP_LED_PWM_LSB 0x18
+#define LP8860_EEPROM_CNTRL 0x19
+#define LP8860_EEPROM_UNLOCK 0x1a
+
+#define LP8860_EEPROM_REG_0 0x60
+#define LP8860_EEPROM_REG_1 0x61
+#define LP8860_EEPROM_REG_2 0x62
+#define LP8860_EEPROM_REG_3 0x63
+#define LP8860_EEPROM_REG_4 0x64
+#define LP8860_EEPROM_REG_5 0x65
+#define LP8860_EEPROM_REG_6 0x66
+#define LP8860_EEPROM_REG_7 0x67
+#define LP8860_EEPROM_REG_8 0x68
+#define LP8860_EEPROM_REG_9 0x69
+#define LP8860_EEPROM_REG_10 0x6a
+#define LP8860_EEPROM_REG_11 0x6b
+#define LP8860_EEPROM_REG_12 0x6c
+#define LP8860_EEPROM_REG_13 0x6d
+#define LP8860_EEPROM_REG_14 0x6e
+#define LP8860_EEPROM_REG_15 0x6f
+#define LP8860_EEPROM_REG_16 0x70
+#define LP8860_EEPROM_REG_17 0x71
+#define LP8860_EEPROM_REG_18 0x72
+#define LP8860_EEPROM_REG_19 0x73
+#define LP8860_EEPROM_REG_20 0x74
+#define LP8860_EEPROM_REG_21 0x75
+#define LP8860_EEPROM_REG_22 0x76
+#define LP8860_EEPROM_REG_23 0x77
+#define LP8860_EEPROM_REG_24 0x78
+
+#define LP8860_LOCK_EEPROM 0x00
+#define LP8860_UNLOCK_EEPROM 0x01
+#define LP8860_PROGRAM_EEPROM 0x02
+#define LP8860_EEPROM_CODE_1 0x08
+#define LP8860_EEPROM_CODE_2 0xba
+#define LP8860_EEPROM_CODE_3 0xef
+
+#define LP8860_CLEAR_FAULTS 0x01
+
+#define LP8860_DISP_LED_NAME "display_cluster"
+
+/**
+ * struct lp8860_led -
+ * @lock - Lock for reading/writing the device
+ * @work - Work item used to off load the brightness register writes
+ * @client - Pointer to the I2C client
+ * @led_dev - led class device pointer
+ * @regmap - Devices register map
+ * @eeprom_regmap - EEPROM register map
+ * @enable_gpio - VDDIO/EN gpio to enable communication interface
+ * @regulator - LED supply regulator pointer
+ * @brightness - Current brightness value requested
+ * @label - LED label
+**/
+struct lp8860_led {
+ struct mutex lock;
+ struct work_struct work;
+ struct i2c_client *client;
+ struct led_classdev led_dev;
+ struct regmap *regmap;
+ struct regmap *eeprom_regmap;
+ struct gpio_desc *enable_gpio;
+ struct regulator *regulator;
+ enum led_brightness brightness;
+ const char *label;
+};
+
+struct lp8860_eeprom_reg {
+ uint8_t reg;
+ uint8_t value;
+};
+
+static struct lp8860_eeprom_reg lp8860_eeprom_disp_regs[] = {
+ { LP8860_EEPROM_REG_0, 0xed },
+ { LP8860_EEPROM_REG_1, 0xdf },
+ { LP8860_EEPROM_REG_2, 0xdc },
+ { LP8860_EEPROM_REG_3, 0xf0 },
+ { LP8860_EEPROM_REG_4, 0xdf },
+ { LP8860_EEPROM_REG_5, 0xe5 },
+ { LP8860_EEPROM_REG_6, 0xf2 },
+ { LP8860_EEPROM_REG_7, 0x77 },
+ { LP8860_EEPROM_REG_8, 0x77 },
+ { LP8860_EEPROM_REG_9, 0x71 },
+ { LP8860_EEPROM_REG_10, 0x3f },
+ { LP8860_EEPROM_REG_11, 0xb7 },
+ { LP8860_EEPROM_REG_12, 0x17 },
+ { LP8860_EEPROM_REG_13, 0xef },
+ { LP8860_EEPROM_REG_14, 0xb0 },
+ { LP8860_EEPROM_REG_15, 0x87 },
+ { LP8860_EEPROM_REG_16, 0xce },
+ { LP8860_EEPROM_REG_17, 0x72 },
+ { LP8860_EEPROM_REG_18, 0xe5 },
+ { LP8860_EEPROM_REG_19, 0xdf },
+ { LP8860_EEPROM_REG_20, 0x35 },
+ { LP8860_EEPROM_REG_21, 0x06 },
+ { LP8860_EEPROM_REG_22, 0xdc },
+ { LP8860_EEPROM_REG_23, 0x88 },
+ { LP8860_EEPROM_REG_24, 0x3E },
+};
+
+static int lp8860_unlock_eeprom(struct lp8860_led *led, int lock)
+{
+ int ret;
+
+ mutex_lock(&led->lock);
+
+ if (lock == LP8860_UNLOCK_EEPROM) {
+ ret = regmap_write(led->regmap,
+ LP8860_EEPROM_UNLOCK,
+ LP8860_EEPROM_CODE_1);
+ if (ret) {
+ dev_err(&led->client->dev, "EEPROM Unlock failed\n");
+ goto out;
+ }
+
+ ret = regmap_write(led->regmap,
+ LP8860_EEPROM_UNLOCK,
+ LP8860_EEPROM_CODE_2);
+ if (ret) {
+ dev_err(&led->client->dev, "EEPROM Unlock failed\n");
+ goto out;
+ }
+ ret = regmap_write(led->regmap,
+ LP8860_EEPROM_UNLOCK,
+ LP8860_EEPROM_CODE_3);
+ if (ret) {
+ dev_err(&led->client->dev, "EEPROM Unlock failed\n");
+ goto out;
+ }
+ } else {
+ ret = regmap_write(led->regmap,
+ LP8860_EEPROM_UNLOCK,
+ LP8860_LOCK_EEPROM);
+ }
+
+out:
+ mutex_unlock(&led->lock);
+ return ret;
+}
+
+static int lp8860_fault_check(struct lp8860_led *led)
+{
+ int ret, fault;
+ unsigned int read_buf;
+
+ ret = regmap_read(led->regmap, LP8860_LED_FAULT, &read_buf);
+ if (ret)
+ goto out;
+
+ fault = read_buf;
+
+ ret = regmap_read(led->regmap, LP8860_FAULT, &read_buf);
+ if (ret)
+ goto out;
+
+ fault |= read_buf;
+
+ /* Attempt to clear any faults */
+ if (fault)
+ ret = regmap_write(led->regmap, LP8860_FAULT_CLEAR,
+ LP8860_CLEAR_FAULTS);
+out:
+ return ret;
+}
+
+static void lp8860_led_brightness_work(struct work_struct *work)
+{
+ struct lp8860_led *led = container_of(work, struct lp8860_led, work);
+ int ret;
+ int disp_brightness = led->brightness * 255;
+
+ mutex_lock(&led->lock);
+
+ ret = lp8860_fault_check(led);
+ if (ret) {
+ dev_err(&led->client->dev, "Cannot read/clear faults\n");
+ goto out;
+ }
+
+ ret = regmap_write(led->regmap, LP8860_DISP_CL1_BRT_MSB,
+ (disp_brightness & 0xff00) >> 8);
+ if (ret) {
+ dev_err(&led->client->dev, "Cannot write CL1 MSB\n");
+ goto out;
+ }
+
+ ret = regmap_write(led->regmap, LP8860_DISP_CL1_BRT_LSB,
+ disp_brightness & 0xff);
+ if (ret) {
+ dev_err(&led->client->dev, "Cannot write CL1 LSB\n");
+ goto out;
+ }
+out:
+ mutex_unlock(&led->lock);
+}
+
+static void lp8860_brightness_set(struct led_classdev *led_cdev,
+ enum led_brightness brt_val)
+{
+ struct lp8860_led *led =
+ container_of(led_cdev, struct lp8860_led, led_dev);
+
+ led->brightness = brt_val;
+ schedule_work(&led->work);
+}
+
+static int lp8860_init(struct lp8860_led *led)
+{
+ unsigned int read_buf;
+ int ret, i, reg_count;
+
+ if (led->enable_gpio)
+ gpiod_direction_output(led->enable_gpio, 1);
+
+ ret = lp8860_fault_check(led);
+ if (ret)
+ goto out;
+
+ ret = regmap_read(led->regmap, LP8860_STATUS, &read_buf);
+ if (ret)
+ goto out;
+
+ ret = lp8860_unlock_eeprom(led, LP8860_UNLOCK_EEPROM);
+ if (ret) {
+ dev_err(&led->client->dev, "Failed unlocking EEPROM\n");
+ goto out;
+ }
+
+ reg_count = ARRAY_SIZE(lp8860_eeprom_disp_regs) / sizeof(lp8860_eeprom_disp_regs[0]);
+ for (i = 0; i < reg_count; i++) {
+ ret = regmap_write(led->eeprom_regmap,
+ lp8860_eeprom_disp_regs[i].reg,
+ lp8860_eeprom_disp_regs[i].value);
+ if (ret) {
+ dev_err(&led->client->dev, "Failed writing EEPROM\n");
+ goto out;
+ }
+ }
+
+ ret = lp8860_unlock_eeprom(led, LP8860_LOCK_EEPROM);
+ if (ret)
+ goto out;
+
+ ret = regmap_write(led->regmap,
+ LP8860_EEPROM_CNTRL,
+ LP8860_PROGRAM_EEPROM);
+ if (ret)
+ dev_err(&led->client->dev, "Failed programming EEPROM\n");
+out:
+ if (ret)
+ if (led->enable_gpio)
+ gpiod_direction_output(led->enable_gpio, 0);
+ return ret;
+}
+
+static struct reg_default lp8860_reg_defs[] = {
+ { LP8860_DISP_CL1_BRT_MSB, 0x00},
+ { LP8860_DISP_CL1_BRT_LSB, 0x00},
+ { LP8860_DISP_CL1_CURR_MSB, 0x00},
+ { LP8860_DISP_CL1_CURR_LSB, 0x00},
+ { LP8860_CL2_BRT_MSB, 0x00},
+ { LP8860_CL2_BRT_LSB, 0x00},
+ { LP8860_CL2_CURRENT, 0x00},
+ { LP8860_CL3_BRT_MSB, 0x00},
+ { LP8860_CL3_BRT_LSB, 0x00},
+ { LP8860_CL3_CURRENT, 0x00},
+ { LP8860_CL4_BRT_MSB, 0x00},
+ { LP8860_CL4_BRT_LSB, 0x00},
+ { LP8860_CL4_CURRENT, 0x00},
+ { LP8860_CONFIG, 0x00},
+ { LP8860_FAULT_CLEAR, 0x00},
+ { LP8860_EEPROM_CNTRL, 0x80},
+ { LP8860_EEPROM_UNLOCK, 0x00},
+};
+
+static const struct regmap_config lp8860_regmap_config = {
+ .reg_bits = 8,
+ .val_bits = 8,
+
+ .max_register = LP8860_EEPROM_UNLOCK,
+ .reg_defaults = lp8860_reg_defs,
+ .num_reg_defaults = ARRAY_SIZE(lp8860_reg_defs),
+ .cache_type = REGCACHE_NONE,
+};
+
+static struct reg_default lp8860_eeprom_defs[] = {
+ { LP8860_EEPROM_REG_0, 0x00 },
+ { LP8860_EEPROM_REG_1, 0x00 },
+ { LP8860_EEPROM_REG_2, 0x00 },
+ { LP8860_EEPROM_REG_3, 0x00 },
+ { LP8860_EEPROM_REG_4, 0x00 },
+ { LP8860_EEPROM_REG_5, 0x00 },
+ { LP8860_EEPROM_REG_6, 0x00 },
+ { LP8860_EEPROM_REG_7, 0x00 },
+ { LP8860_EEPROM_REG_8, 0x00 },
+ { LP8860_EEPROM_REG_9, 0x00 },
+ { LP8860_EEPROM_REG_10, 0x00 },
+ { LP8860_EEPROM_REG_11, 0x00 },
+ { LP8860_EEPROM_REG_12, 0x00 },
+ { LP8860_EEPROM_REG_13, 0x00 },
+ { LP8860_EEPROM_REG_14, 0x00 },
+ { LP8860_EEPROM_REG_15, 0x00 },
+ { LP8860_EEPROM_REG_16, 0x00 },
+ { LP8860_EEPROM_REG_17, 0x00 },
+ { LP8860_EEPROM_REG_18, 0x00 },
+ { LP8860_EEPROM_REG_19, 0x00 },
+ { LP8860_EEPROM_REG_20, 0x00 },
+ { LP8860_EEPROM_REG_21, 0x00 },
+ { LP8860_EEPROM_REG_22, 0x00 },
+ { LP8860_EEPROM_REG_23, 0x00 },
+ { LP8860_EEPROM_REG_24, 0x00 },
+};
+
+static const struct regmap_config lp8860_eeprom_regmap_config = {
+ .reg_bits = 8,
+ .val_bits = 8,
+
+ .max_register = LP8860_EEPROM_REG_24,
+ .reg_defaults = lp8860_eeprom_defs,
+ .num_reg_defaults = ARRAY_SIZE(lp8860_eeprom_defs),
+ .cache_type = REGCACHE_NONE,
+};
+
+static int lp8860_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ int ret;
+ struct lp8860_led *led;
+ struct device_node *np = client->dev.of_node;
+
+ led = devm_kzalloc(&client->dev, sizeof(*led), GFP_KERNEL);
+ if (!led)
+ return -ENOMEM;
+
+ led->label = LP8860_DISP_LED_NAME;
+
+ if (client->dev.of_node) {
+ ret = of_property_read_string(np, "label", &led->label);
+ if (ret) {
+ dev_err(&client->dev, "Missing label in dt\n");
+ return -EINVAL;
+ }
+ }
+
+ led->enable_gpio = devm_gpiod_get_optional(&client->dev,
+ "enable", GPIOD_OUT_LOW);
+ if (IS_ERR(led->enable_gpio)) {
+ ret = PTR_ERR(led->enable_gpio);
+ dev_err(&client->dev, "Failed to get enable gpio: %d\n", ret);
+ return ret;
+ }
+
+ led->regulator = devm_regulator_get(&client->dev, "vled");
+ if (IS_ERR(led->regulator))
+ led->regulator = NULL;
+
+ led->client = client;
+ led->led_dev.name = led->label;
+ led->led_dev.max_brightness = LED_FULL;
+ led->led_dev.brightness_set = lp8860_brightness_set;
+
+ mutex_init(&led->lock);
+ INIT_WORK(&led->work, lp8860_led_brightness_work);
+
+ i2c_set_clientdata(client, led);
+
+ led->regmap = devm_regmap_init_i2c(client, &lp8860_regmap_config);
+ if (IS_ERR(led->regmap)) {
+ ret = PTR_ERR(led->regmap);
+ dev_err(&client->dev, "Failed to allocate register map: %d\n",
+ ret);
+ return ret;
+ }
+
+ led->eeprom_regmap = devm_regmap_init_i2c(client, &lp8860_eeprom_regmap_config);
+ if (IS_ERR(led->eeprom_regmap)) {
+ ret = PTR_ERR(led->eeprom_regmap);
+ dev_err(&client->dev, "Failed to allocate register map: %d\n",
+ ret);
+ return ret;
+ }
+
+ ret = lp8860_init(led);
+ if (ret)
+ return ret;
+
+ ret = led_classdev_register(&client->dev, &led->led_dev);
+ if (ret) {
+ dev_err(&client->dev, "led register err: %d\n", ret);
+ return ret;
+ }
+
+ return 0;
+}
+
+static int lp8860_remove(struct i2c_client *client)
+{
+ struct lp8860_led *led = i2c_get_clientdata(client);
+ int ret;
+
+ led_classdev_unregister(&led->led_dev);
+ cancel_work_sync(&led->work);
+
+ if (led->enable_gpio)
+ gpiod_direction_output(led->enable_gpio, 0);
+
+ if (led->regulator) {
+ ret = regulator_disable(led->regulator);
+ if (ret)
+ dev_err(&led->client->dev,
+ "Failed to disable regulator\n");
+ }
+
+ return 0;
+}
+
+static const struct i2c_device_id lp8860_id[] = {
+ { "lp8860", 0 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, lp8860_id);
+
+#ifdef CONFIG_OF
+static const struct of_device_id of_lp8860_leds_match[] = {
+ { .compatible = "ti,lp8860", },
+ {},
+};
+MODULE_DEVICE_TABLE(of, of_lp8860_leds_match);
+#endif
+
+static struct i2c_driver lp8860_driver = {
+ .driver = {
+ .name = "lp8860",
+ .of_match_table = of_match_ptr(of_lp8860_leds_match),
+ },
+ .probe = lp8860_probe,
+ .remove = lp8860_remove,
+ .id_table = lp8860_id,
+};
+module_i2c_driver(lp8860_driver);
+
+MODULE_DESCRIPTION("Texas Instruments LP8860 LED driver");
+MODULE_AUTHOR("Dan Murphy <dmurphy@ti.com>");
+MODULE_LICENSE("GPL");
diff --git a/kernel/drivers/leds/leds-lt3593.c b/kernel/drivers/leds/leds-lt3593.c
new file mode 100644
index 000000000..9f4112476
--- /dev/null
+++ b/kernel/drivers/leds/leds-lt3593.c
@@ -0,0 +1,195 @@
+/*
+ * LEDs driver for LT3593 controllers
+ *
+ * See the datasheet at http://cds.linear.com/docs/Datasheet/3593f.pdf
+ *
+ * Copyright (c) 2009 Daniel Mack <daniel@caiaq.de>
+ *
+ * Based on leds-gpio.c,
+ *
+ * Copyright (C) 2007 8D Technologies inc.
+ * Raphael Assenat <raph@8d.com>
+ * Copyright (C) 2008 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/leds.h>
+#include <linux/workqueue.h>
+#include <linux/delay.h>
+#include <linux/gpio.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+
+struct lt3593_led_data {
+ struct led_classdev cdev;
+ unsigned gpio;
+ struct work_struct work;
+ u8 new_level;
+};
+
+static void lt3593_led_work(struct work_struct *work)
+{
+ int pulses;
+ struct lt3593_led_data *led_dat =
+ container_of(work, struct lt3593_led_data, work);
+
+ /*
+ * The LT3593 resets its internal current level register to the maximum
+ * level on the first falling edge on the control pin. Each following
+ * falling edge decreases the current level by 625uA. Up to 32 pulses
+ * can be sent, so the maximum power reduction is 20mA.
+ * After a timeout of 128us, the value is taken from the register and
+ * applied is to the output driver.
+ */
+
+ if (led_dat->new_level == 0) {
+ gpio_set_value_cansleep(led_dat->gpio, 0);
+ return;
+ }
+
+ pulses = 32 - (led_dat->new_level * 32) / 255;
+
+ if (pulses == 0) {
+ gpio_set_value_cansleep(led_dat->gpio, 0);
+ mdelay(1);
+ gpio_set_value_cansleep(led_dat->gpio, 1);
+ return;
+ }
+
+ gpio_set_value_cansleep(led_dat->gpio, 1);
+
+ while (pulses--) {
+ gpio_set_value_cansleep(led_dat->gpio, 0);
+ udelay(1);
+ gpio_set_value_cansleep(led_dat->gpio, 1);
+ udelay(1);
+ }
+}
+
+static void lt3593_led_set(struct led_classdev *led_cdev,
+ enum led_brightness value)
+{
+ struct lt3593_led_data *led_dat =
+ container_of(led_cdev, struct lt3593_led_data, cdev);
+
+ led_dat->new_level = value;
+ schedule_work(&led_dat->work);
+}
+
+static int create_lt3593_led(const struct gpio_led *template,
+ struct lt3593_led_data *led_dat, struct device *parent)
+{
+ int ret, state;
+
+ /* skip leds on GPIOs that aren't available */
+ if (!gpio_is_valid(template->gpio)) {
+ dev_info(parent, "%s: skipping unavailable LT3593 LED at gpio %d (%s)\n",
+ KBUILD_MODNAME, template->gpio, template->name);
+ return 0;
+ }
+
+ led_dat->cdev.name = template->name;
+ led_dat->cdev.default_trigger = template->default_trigger;
+ led_dat->gpio = template->gpio;
+
+ led_dat->cdev.brightness_set = lt3593_led_set;
+
+ state = (template->default_state == LEDS_GPIO_DEFSTATE_ON);
+ led_dat->cdev.brightness = state ? LED_FULL : LED_OFF;
+
+ if (!template->retain_state_suspended)
+ led_dat->cdev.flags |= LED_CORE_SUSPENDRESUME;
+
+ ret = devm_gpio_request_one(parent, template->gpio, state ?
+ GPIOF_OUT_INIT_HIGH : GPIOF_OUT_INIT_LOW,
+ template->name);
+ if (ret < 0)
+ return ret;
+
+ INIT_WORK(&led_dat->work, lt3593_led_work);
+
+ ret = led_classdev_register(parent, &led_dat->cdev);
+ if (ret < 0)
+ return ret;
+
+ dev_info(parent, "%s: registered LT3593 LED '%s' at GPIO %d\n",
+ KBUILD_MODNAME, template->name, template->gpio);
+
+ return 0;
+}
+
+static void delete_lt3593_led(struct lt3593_led_data *led)
+{
+ if (!gpio_is_valid(led->gpio))
+ return;
+
+ led_classdev_unregister(&led->cdev);
+ cancel_work_sync(&led->work);
+}
+
+static int lt3593_led_probe(struct platform_device *pdev)
+{
+ struct gpio_led_platform_data *pdata = dev_get_platdata(&pdev->dev);
+ struct lt3593_led_data *leds_data;
+ int i, ret = 0;
+
+ if (!pdata)
+ return -EBUSY;
+
+ leds_data = devm_kzalloc(&pdev->dev,
+ sizeof(struct lt3593_led_data) * pdata->num_leds,
+ GFP_KERNEL);
+ if (!leds_data)
+ return -ENOMEM;
+
+ for (i = 0; i < pdata->num_leds; i++) {
+ ret = create_lt3593_led(&pdata->leds[i], &leds_data[i],
+ &pdev->dev);
+ if (ret < 0)
+ goto err;
+ }
+
+ platform_set_drvdata(pdev, leds_data);
+
+ return 0;
+
+err:
+ for (i = i - 1; i >= 0; i--)
+ delete_lt3593_led(&leds_data[i]);
+
+ return ret;
+}
+
+static int lt3593_led_remove(struct platform_device *pdev)
+{
+ int i;
+ struct gpio_led_platform_data *pdata = dev_get_platdata(&pdev->dev);
+ struct lt3593_led_data *leds_data;
+
+ leds_data = platform_get_drvdata(pdev);
+
+ for (i = 0; i < pdata->num_leds; i++)
+ delete_lt3593_led(&leds_data[i]);
+
+ return 0;
+}
+
+static struct platform_driver lt3593_led_driver = {
+ .probe = lt3593_led_probe,
+ .remove = lt3593_led_remove,
+ .driver = {
+ .name = "leds-lt3593",
+ },
+};
+
+module_platform_driver(lt3593_led_driver);
+
+MODULE_AUTHOR("Daniel Mack <daniel@caiaq.de>");
+MODULE_DESCRIPTION("LED driver for LT3593 controllers");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:leds-lt3593");
diff --git a/kernel/drivers/leds/leds-max8997.c b/kernel/drivers/leds/leds-max8997.c
new file mode 100644
index 000000000..c592aa566
--- /dev/null
+++ b/kernel/drivers/leds/leds-max8997.c
@@ -0,0 +1,316 @@
+/*
+ * leds-max8997.c - LED class driver for MAX8997 LEDs.
+ *
+ * Copyright (C) 2011 Samsung Electronics
+ * Donggeun Kim <dg77.kim@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/err.h>
+#include <linux/slab.h>
+#include <linux/workqueue.h>
+#include <linux/leds.h>
+#include <linux/mfd/max8997.h>
+#include <linux/mfd/max8997-private.h>
+#include <linux/platform_device.h>
+
+#define MAX8997_LED_FLASH_SHIFT 3
+#define MAX8997_LED_FLASH_CUR_MASK 0xf8
+#define MAX8997_LED_MOVIE_SHIFT 4
+#define MAX8997_LED_MOVIE_CUR_MASK 0xf0
+
+#define MAX8997_LED_FLASH_MAX_BRIGHTNESS 0x1f
+#define MAX8997_LED_MOVIE_MAX_BRIGHTNESS 0xf
+#define MAX8997_LED_NONE_MAX_BRIGHTNESS 0
+
+#define MAX8997_LED0_FLASH_MASK 0x1
+#define MAX8997_LED0_FLASH_PIN_MASK 0x5
+#define MAX8997_LED0_MOVIE_MASK 0x8
+#define MAX8997_LED0_MOVIE_PIN_MASK 0x28
+
+#define MAX8997_LED1_FLASH_MASK 0x2
+#define MAX8997_LED1_FLASH_PIN_MASK 0x6
+#define MAX8997_LED1_MOVIE_MASK 0x10
+#define MAX8997_LED1_MOVIE_PIN_MASK 0x30
+
+#define MAX8997_LED_BOOST_ENABLE_MASK (1 << 6)
+
+struct max8997_led {
+ struct max8997_dev *iodev;
+ struct led_classdev cdev;
+ bool enabled;
+ int id;
+ enum max8997_led_mode led_mode;
+ struct mutex mutex;
+};
+
+static void max8997_led_set_mode(struct max8997_led *led,
+ enum max8997_led_mode mode)
+{
+ int ret;
+ struct i2c_client *client = led->iodev->i2c;
+ u8 mask = 0, val;
+
+ switch (mode) {
+ case MAX8997_FLASH_MODE:
+ mask = MAX8997_LED1_FLASH_MASK | MAX8997_LED0_FLASH_MASK;
+ val = led->id ?
+ MAX8997_LED1_FLASH_MASK : MAX8997_LED0_FLASH_MASK;
+ led->cdev.max_brightness = MAX8997_LED_FLASH_MAX_BRIGHTNESS;
+ break;
+ case MAX8997_MOVIE_MODE:
+ mask = MAX8997_LED1_MOVIE_MASK | MAX8997_LED0_MOVIE_MASK;
+ val = led->id ?
+ MAX8997_LED1_MOVIE_MASK : MAX8997_LED0_MOVIE_MASK;
+ led->cdev.max_brightness = MAX8997_LED_MOVIE_MAX_BRIGHTNESS;
+ break;
+ case MAX8997_FLASH_PIN_CONTROL_MODE:
+ mask = MAX8997_LED1_FLASH_PIN_MASK |
+ MAX8997_LED0_FLASH_PIN_MASK;
+ val = led->id ?
+ MAX8997_LED1_FLASH_PIN_MASK : MAX8997_LED0_FLASH_PIN_MASK;
+ led->cdev.max_brightness = MAX8997_LED_FLASH_MAX_BRIGHTNESS;
+ break;
+ case MAX8997_MOVIE_PIN_CONTROL_MODE:
+ mask = MAX8997_LED1_MOVIE_PIN_MASK |
+ MAX8997_LED0_MOVIE_PIN_MASK;
+ val = led->id ?
+ MAX8997_LED1_MOVIE_PIN_MASK : MAX8997_LED0_MOVIE_PIN_MASK;
+ led->cdev.max_brightness = MAX8997_LED_MOVIE_MAX_BRIGHTNESS;
+ break;
+ default:
+ led->cdev.max_brightness = MAX8997_LED_NONE_MAX_BRIGHTNESS;
+ break;
+ }
+
+ if (mask) {
+ ret = max8997_update_reg(client, MAX8997_REG_LEN_CNTL, val,
+ mask);
+ if (ret)
+ dev_err(led->iodev->dev,
+ "failed to update register(%d)\n", ret);
+ }
+
+ led->led_mode = mode;
+}
+
+static void max8997_led_enable(struct max8997_led *led, bool enable)
+{
+ int ret;
+ struct i2c_client *client = led->iodev->i2c;
+ u8 val = 0, mask = MAX8997_LED_BOOST_ENABLE_MASK;
+
+ if (led->enabled == enable)
+ return;
+
+ val = enable ? MAX8997_LED_BOOST_ENABLE_MASK : 0;
+
+ ret = max8997_update_reg(client, MAX8997_REG_BOOST_CNTL, val, mask);
+ if (ret)
+ dev_err(led->iodev->dev,
+ "failed to update register(%d)\n", ret);
+
+ led->enabled = enable;
+}
+
+static void max8997_led_set_current(struct max8997_led *led,
+ enum led_brightness value)
+{
+ int ret;
+ struct i2c_client *client = led->iodev->i2c;
+ u8 val = 0, mask = 0, reg = 0;
+
+ switch (led->led_mode) {
+ case MAX8997_FLASH_MODE:
+ case MAX8997_FLASH_PIN_CONTROL_MODE:
+ val = value << MAX8997_LED_FLASH_SHIFT;
+ mask = MAX8997_LED_FLASH_CUR_MASK;
+ reg = led->id ? MAX8997_REG_FLASH2_CUR : MAX8997_REG_FLASH1_CUR;
+ break;
+ case MAX8997_MOVIE_MODE:
+ case MAX8997_MOVIE_PIN_CONTROL_MODE:
+ val = value << MAX8997_LED_MOVIE_SHIFT;
+ mask = MAX8997_LED_MOVIE_CUR_MASK;
+ reg = MAX8997_REG_MOVIE_CUR;
+ break;
+ default:
+ break;
+ }
+
+ if (mask) {
+ ret = max8997_update_reg(client, reg, val, mask);
+ if (ret)
+ dev_err(led->iodev->dev,
+ "failed to update register(%d)\n", ret);
+ }
+}
+
+static void max8997_led_brightness_set(struct led_classdev *led_cdev,
+ enum led_brightness value)
+{
+ struct max8997_led *led =
+ container_of(led_cdev, struct max8997_led, cdev);
+
+ if (value) {
+ max8997_led_set_current(led, value);
+ max8997_led_enable(led, true);
+ } else {
+ max8997_led_set_current(led, value);
+ max8997_led_enable(led, false);
+ }
+}
+
+static ssize_t max8997_led_show_mode(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct led_classdev *led_cdev = dev_get_drvdata(dev);
+ struct max8997_led *led =
+ container_of(led_cdev, struct max8997_led, cdev);
+ ssize_t ret = 0;
+
+ mutex_lock(&led->mutex);
+
+ switch (led->led_mode) {
+ case MAX8997_FLASH_MODE:
+ ret += sprintf(buf, "FLASH\n");
+ break;
+ case MAX8997_MOVIE_MODE:
+ ret += sprintf(buf, "MOVIE\n");
+ break;
+ case MAX8997_FLASH_PIN_CONTROL_MODE:
+ ret += sprintf(buf, "FLASH_PIN_CONTROL\n");
+ break;
+ case MAX8997_MOVIE_PIN_CONTROL_MODE:
+ ret += sprintf(buf, "MOVIE_PIN_CONTROL\n");
+ break;
+ default:
+ ret += sprintf(buf, "NONE\n");
+ break;
+ }
+
+ mutex_unlock(&led->mutex);
+
+ return ret;
+}
+
+static ssize_t max8997_led_store_mode(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t size)
+{
+ struct led_classdev *led_cdev = dev_get_drvdata(dev);
+ struct max8997_led *led =
+ container_of(led_cdev, struct max8997_led, cdev);
+ enum max8997_led_mode mode;
+
+ mutex_lock(&led->mutex);
+
+ if (!strncmp(buf, "FLASH_PIN_CONTROL", 17))
+ mode = MAX8997_FLASH_PIN_CONTROL_MODE;
+ else if (!strncmp(buf, "MOVIE_PIN_CONTROL", 17))
+ mode = MAX8997_MOVIE_PIN_CONTROL_MODE;
+ else if (!strncmp(buf, "FLASH", 5))
+ mode = MAX8997_FLASH_MODE;
+ else if (!strncmp(buf, "MOVIE", 5))
+ mode = MAX8997_MOVIE_MODE;
+ else
+ mode = MAX8997_NONE;
+
+ max8997_led_set_mode(led, mode);
+
+ mutex_unlock(&led->mutex);
+
+ return size;
+}
+
+static DEVICE_ATTR(mode, 0644, max8997_led_show_mode, max8997_led_store_mode);
+
+static struct attribute *max8997_attrs[] = {
+ &dev_attr_mode.attr,
+ NULL
+};
+ATTRIBUTE_GROUPS(max8997);
+
+static int max8997_led_probe(struct platform_device *pdev)
+{
+ struct max8997_dev *iodev = dev_get_drvdata(pdev->dev.parent);
+ struct max8997_platform_data *pdata = dev_get_platdata(iodev->dev);
+ struct max8997_led *led;
+ char name[20];
+ int ret = 0;
+
+ if (pdata == NULL) {
+ dev_err(&pdev->dev, "no platform data\n");
+ return -ENODEV;
+ }
+
+ led = devm_kzalloc(&pdev->dev, sizeof(*led), GFP_KERNEL);
+ if (led == NULL)
+ return -ENOMEM;
+
+ led->id = pdev->id;
+ snprintf(name, sizeof(name), "max8997-led%d", pdev->id);
+
+ led->cdev.name = name;
+ led->cdev.brightness_set = max8997_led_brightness_set;
+ led->cdev.flags |= LED_CORE_SUSPENDRESUME;
+ led->cdev.brightness = 0;
+ led->cdev.groups = max8997_groups;
+ led->iodev = iodev;
+
+ /* initialize mode and brightness according to platform_data */
+ if (pdata->led_pdata) {
+ u8 mode = 0, brightness = 0;
+
+ mode = pdata->led_pdata->mode[led->id];
+ brightness = pdata->led_pdata->brightness[led->id];
+
+ max8997_led_set_mode(led, pdata->led_pdata->mode[led->id]);
+
+ if (brightness > led->cdev.max_brightness)
+ brightness = led->cdev.max_brightness;
+ max8997_led_set_current(led, brightness);
+ led->cdev.brightness = brightness;
+ } else {
+ max8997_led_set_mode(led, MAX8997_NONE);
+ max8997_led_set_current(led, 0);
+ }
+
+ mutex_init(&led->mutex);
+
+ platform_set_drvdata(pdev, led);
+
+ ret = led_classdev_register(&pdev->dev, &led->cdev);
+ if (ret < 0)
+ return ret;
+
+ return 0;
+}
+
+static int max8997_led_remove(struct platform_device *pdev)
+{
+ struct max8997_led *led = platform_get_drvdata(pdev);
+
+ led_classdev_unregister(&led->cdev);
+
+ return 0;
+}
+
+static struct platform_driver max8997_led_driver = {
+ .driver = {
+ .name = "max8997-led",
+ },
+ .probe = max8997_led_probe,
+ .remove = max8997_led_remove,
+};
+
+module_platform_driver(max8997_led_driver);
+
+MODULE_AUTHOR("Donggeun Kim <dg77.kim@samsung.com>");
+MODULE_DESCRIPTION("MAX8997 LED driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:max8997-led");
diff --git a/kernel/drivers/leds/leds-mc13783.c b/kernel/drivers/leds/leds-mc13783.c
new file mode 100644
index 000000000..e2b847fe2
--- /dev/null
+++ b/kernel/drivers/leds/leds-mc13783.c
@@ -0,0 +1,334 @@
+/*
+ * LEDs driver for Freescale MC13783/MC13892/MC34708
+ *
+ * Copyright (C) 2010 Philippe Rétornaz
+ *
+ * Based on leds-da903x:
+ * Copyright (C) 2008 Compulab, Ltd.
+ * Mike Rapoport <mike@compulab.co.il>
+ *
+ * Copyright (C) 2006-2008 Marvell International Ltd.
+ * Eric Miao <eric.miao@marvell.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/leds.h>
+#include <linux/of.h>
+#include <linux/workqueue.h>
+#include <linux/mfd/mc13xxx.h>
+
+struct mc13xxx_led_devtype {
+ int led_min;
+ int led_max;
+ int num_regs;
+ u32 ledctrl_base;
+};
+
+struct mc13xxx_led {
+ struct led_classdev cdev;
+ struct work_struct work;
+ enum led_brightness new_brightness;
+ int id;
+ struct mc13xxx_leds *leds;
+};
+
+struct mc13xxx_leds {
+ struct mc13xxx *master;
+ struct mc13xxx_led_devtype *devtype;
+ int num_leds;
+ struct mc13xxx_led *led;
+};
+
+static unsigned int mc13xxx_max_brightness(int id)
+{
+ if (id >= MC13783_LED_MD && id <= MC13783_LED_KP)
+ return 0x0f;
+ else if (id >= MC13783_LED_R1 && id <= MC13783_LED_B3)
+ return 0x1f;
+
+ return 0x3f;
+}
+
+static void mc13xxx_led_work(struct work_struct *work)
+{
+ struct mc13xxx_led *led = container_of(work, struct mc13xxx_led, work);
+ struct mc13xxx_leds *leds = led->leds;
+ unsigned int reg, bank, off, shift;
+
+ switch (led->id) {
+ case MC13783_LED_MD:
+ case MC13783_LED_AD:
+ case MC13783_LED_KP:
+ reg = 2;
+ shift = 9 + (led->id - MC13783_LED_MD) * 4;
+ break;
+ case MC13783_LED_R1:
+ case MC13783_LED_G1:
+ case MC13783_LED_B1:
+ case MC13783_LED_R2:
+ case MC13783_LED_G2:
+ case MC13783_LED_B2:
+ case MC13783_LED_R3:
+ case MC13783_LED_G3:
+ case MC13783_LED_B3:
+ off = led->id - MC13783_LED_R1;
+ bank = off / 3;
+ reg = 3 + bank;
+ shift = (off - bank * 3) * 5 + 6;
+ break;
+ case MC13892_LED_MD:
+ case MC13892_LED_AD:
+ case MC13892_LED_KP:
+ reg = (led->id - MC13892_LED_MD) / 2;
+ shift = 3 + (led->id - MC13892_LED_MD) * 12;
+ break;
+ case MC13892_LED_R:
+ case MC13892_LED_G:
+ case MC13892_LED_B:
+ off = led->id - MC13892_LED_R;
+ bank = off / 2;
+ reg = 2 + bank;
+ shift = (off - bank * 2) * 12 + 3;
+ break;
+ case MC34708_LED_R:
+ case MC34708_LED_G:
+ reg = 0;
+ shift = 3 + (led->id - MC34708_LED_R) * 12;
+ break;
+ default:
+ BUG();
+ }
+
+ mc13xxx_reg_rmw(leds->master, leds->devtype->ledctrl_base + reg,
+ mc13xxx_max_brightness(led->id) << shift,
+ led->new_brightness << shift);
+}
+
+static void mc13xxx_led_set(struct led_classdev *led_cdev,
+ enum led_brightness value)
+{
+ struct mc13xxx_led *led =
+ container_of(led_cdev, struct mc13xxx_led, cdev);
+
+ led->new_brightness = value;
+ schedule_work(&led->work);
+}
+
+#ifdef CONFIG_OF
+static struct mc13xxx_leds_platform_data __init *mc13xxx_led_probe_dt(
+ struct platform_device *pdev)
+{
+ struct mc13xxx_leds *leds = platform_get_drvdata(pdev);
+ struct mc13xxx_leds_platform_data *pdata;
+ struct device_node *parent, *child;
+ struct device *dev = &pdev->dev;
+ int i = 0, ret = -ENODATA;
+
+ pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL);
+ if (!pdata)
+ return ERR_PTR(-ENOMEM);
+
+ parent = of_get_child_by_name(dev->parent->of_node, "leds");
+ if (!parent)
+ goto out_node_put;
+
+ ret = of_property_read_u32_array(parent, "led-control",
+ pdata->led_control,
+ leds->devtype->num_regs);
+ if (ret)
+ goto out_node_put;
+
+ pdata->num_leds = of_get_child_count(parent);
+
+ pdata->led = devm_kzalloc(dev, pdata->num_leds * sizeof(*pdata->led),
+ GFP_KERNEL);
+ if (!pdata->led) {
+ ret = -ENOMEM;
+ goto out_node_put;
+ }
+
+ for_each_child_of_node(parent, child) {
+ const char *str;
+ u32 tmp;
+
+ if (of_property_read_u32(child, "reg", &tmp))
+ continue;
+ pdata->led[i].id = leds->devtype->led_min + tmp;
+
+ if (!of_property_read_string(child, "label", &str))
+ pdata->led[i].name = str;
+ if (!of_property_read_string(child, "linux,default-trigger",
+ &str))
+ pdata->led[i].default_trigger = str;
+
+ i++;
+ }
+
+ pdata->num_leds = i;
+ ret = i > 0 ? 0 : -ENODATA;
+
+out_node_put:
+ of_node_put(parent);
+
+ return ret ? ERR_PTR(ret) : pdata;
+}
+#else
+static inline struct mc13xxx_leds_platform_data __init *mc13xxx_led_probe_dt(
+ struct platform_device *pdev)
+{
+ return ERR_PTR(-ENOSYS);
+}
+#endif
+
+static int __init mc13xxx_led_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct mc13xxx_leds_platform_data *pdata = dev_get_platdata(dev);
+ struct mc13xxx *mcdev = dev_get_drvdata(dev->parent);
+ struct mc13xxx_led_devtype *devtype =
+ (struct mc13xxx_led_devtype *)pdev->id_entry->driver_data;
+ struct mc13xxx_leds *leds;
+ int i, id, ret = -ENODATA;
+ u32 init_led = 0;
+
+ leds = devm_kzalloc(dev, sizeof(*leds), GFP_KERNEL);
+ if (!leds)
+ return -ENOMEM;
+
+ leds->devtype = devtype;
+ leds->master = mcdev;
+ platform_set_drvdata(pdev, leds);
+
+ if (dev->parent->of_node) {
+ pdata = mc13xxx_led_probe_dt(pdev);
+ if (IS_ERR(pdata))
+ return PTR_ERR(pdata);
+ } else if (!pdata)
+ return -ENODATA;
+
+ leds->num_leds = pdata->num_leds;
+
+ if ((leds->num_leds < 1) ||
+ (leds->num_leds > (devtype->led_max - devtype->led_min + 1))) {
+ dev_err(dev, "Invalid LED count %d\n", leds->num_leds);
+ return -EINVAL;
+ }
+
+ leds->led = devm_kzalloc(dev, leds->num_leds * sizeof(*leds->led),
+ GFP_KERNEL);
+ if (!leds->led)
+ return -ENOMEM;
+
+ for (i = 0; i < devtype->num_regs; i++) {
+ ret = mc13xxx_reg_write(mcdev, leds->devtype->ledctrl_base + i,
+ pdata->led_control[i]);
+ if (ret)
+ return ret;
+ }
+
+ for (i = 0; i < leds->num_leds; i++) {
+ const char *name, *trig;
+
+ ret = -EINVAL;
+
+ id = pdata->led[i].id;
+ name = pdata->led[i].name;
+ trig = pdata->led[i].default_trigger;
+
+ if ((id > devtype->led_max) || (id < devtype->led_min)) {
+ dev_err(dev, "Invalid ID %i\n", id);
+ break;
+ }
+
+ if (init_led & (1 << id)) {
+ dev_warn(dev, "LED %i already initialized\n", id);
+ break;
+ }
+
+ init_led |= 1 << id;
+ leds->led[i].id = id;
+ leds->led[i].leds = leds;
+ leds->led[i].cdev.name = name;
+ leds->led[i].cdev.default_trigger = trig;
+ leds->led[i].cdev.flags = LED_CORE_SUSPENDRESUME;
+ leds->led[i].cdev.brightness_set = mc13xxx_led_set;
+ leds->led[i].cdev.max_brightness = mc13xxx_max_brightness(id);
+
+ INIT_WORK(&leds->led[i].work, mc13xxx_led_work);
+
+ ret = led_classdev_register(dev->parent, &leds->led[i].cdev);
+ if (ret) {
+ dev_err(dev, "Failed to register LED %i\n", id);
+ break;
+ }
+ }
+
+ if (ret)
+ while (--i >= 0) {
+ led_classdev_unregister(&leds->led[i].cdev);
+ cancel_work_sync(&leds->led[i].work);
+ }
+
+ return ret;
+}
+
+static int mc13xxx_led_remove(struct platform_device *pdev)
+{
+ struct mc13xxx_leds *leds = platform_get_drvdata(pdev);
+ int i;
+
+ for (i = 0; i < leds->num_leds; i++) {
+ led_classdev_unregister(&leds->led[i].cdev);
+ cancel_work_sync(&leds->led[i].work);
+ }
+
+ return 0;
+}
+
+static const struct mc13xxx_led_devtype mc13783_led_devtype = {
+ .led_min = MC13783_LED_MD,
+ .led_max = MC13783_LED_B3,
+ .num_regs = 6,
+ .ledctrl_base = 51,
+};
+
+static const struct mc13xxx_led_devtype mc13892_led_devtype = {
+ .led_min = MC13892_LED_MD,
+ .led_max = MC13892_LED_B,
+ .num_regs = 4,
+ .ledctrl_base = 51,
+};
+
+static const struct mc13xxx_led_devtype mc34708_led_devtype = {
+ .led_min = MC34708_LED_R,
+ .led_max = MC34708_LED_G,
+ .num_regs = 1,
+ .ledctrl_base = 54,
+};
+
+static const struct platform_device_id mc13xxx_led_id_table[] = {
+ { "mc13783-led", (kernel_ulong_t)&mc13783_led_devtype, },
+ { "mc13892-led", (kernel_ulong_t)&mc13892_led_devtype, },
+ { "mc34708-led", (kernel_ulong_t)&mc34708_led_devtype, },
+ { }
+};
+MODULE_DEVICE_TABLE(platform, mc13xxx_led_id_table);
+
+static struct platform_driver mc13xxx_led_driver = {
+ .driver = {
+ .name = "mc13xxx-led",
+ },
+ .remove = mc13xxx_led_remove,
+ .id_table = mc13xxx_led_id_table,
+};
+module_platform_driver_probe(mc13xxx_led_driver, mc13xxx_led_probe);
+
+MODULE_DESCRIPTION("LEDs driver for Freescale MC13XXX PMIC");
+MODULE_AUTHOR("Philippe Retornaz <philippe.retornaz@epfl.ch>");
+MODULE_LICENSE("GPL");
diff --git a/kernel/drivers/leds/leds-menf21bmc.c b/kernel/drivers/leds/leds-menf21bmc.c
new file mode 100644
index 000000000..4b9eea815
--- /dev/null
+++ b/kernel/drivers/leds/leds-menf21bmc.c
@@ -0,0 +1,130 @@
+/*
+ * MEN 14F021P00 Board Management Controller (BMC) LEDs Driver.
+ *
+ * This is the core LED driver of the MEN 14F021P00 BMC.
+ * There are four LEDs available which can be switched on and off.
+ * STATUS LED, HOT SWAP LED, USER LED 1, USER LED 2
+ *
+ * Copyright (C) 2014 MEN Mikro Elektronik Nuernberg GmbH
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/leds.h>
+#include <linux/i2c.h>
+
+#define BMC_CMD_LED_GET_SET 0xA0
+#define BMC_BIT_LED_STATUS BIT(0)
+#define BMC_BIT_LED_HOTSWAP BIT(1)
+#define BMC_BIT_LED_USER1 BIT(2)
+#define BMC_BIT_LED_USER2 BIT(3)
+
+struct menf21bmc_led {
+ struct led_classdev cdev;
+ u8 led_bit;
+ const char *name;
+ struct i2c_client *i2c_client;
+};
+
+static struct menf21bmc_led leds[] = {
+ {
+ .name = "menf21bmc:led_status",
+ .led_bit = BMC_BIT_LED_STATUS,
+ },
+ {
+ .name = "menf21bmc:led_hotswap",
+ .led_bit = BMC_BIT_LED_HOTSWAP,
+ },
+ {
+ .name = "menf21bmc:led_user1",
+ .led_bit = BMC_BIT_LED_USER1,
+ },
+ {
+ .name = "menf21bmc:led_user2",
+ .led_bit = BMC_BIT_LED_USER2,
+ }
+};
+
+static DEFINE_MUTEX(led_lock);
+
+static void
+menf21bmc_led_set(struct led_classdev *led_cdev, enum led_brightness value)
+{
+ int led_val;
+ struct menf21bmc_led *led = container_of(led_cdev,
+ struct menf21bmc_led, cdev);
+
+ mutex_lock(&led_lock);
+ led_val = i2c_smbus_read_byte_data(led->i2c_client,
+ BMC_CMD_LED_GET_SET);
+ if (led_val < 0)
+ goto err_out;
+
+ if (value == LED_OFF)
+ led_val &= ~led->led_bit;
+ else
+ led_val |= led->led_bit;
+
+ i2c_smbus_write_byte_data(led->i2c_client,
+ BMC_CMD_LED_GET_SET, led_val);
+err_out:
+ mutex_unlock(&led_lock);
+}
+
+static int menf21bmc_led_probe(struct platform_device *pdev)
+{
+ int i;
+ int ret;
+ struct i2c_client *i2c_client = to_i2c_client(pdev->dev.parent);
+
+ for (i = 0; i < ARRAY_SIZE(leds); i++) {
+ leds[i].cdev.name = leds[i].name;
+ leds[i].cdev.brightness_set = menf21bmc_led_set;
+ leds[i].i2c_client = i2c_client;
+ ret = led_classdev_register(&pdev->dev, &leds[i].cdev);
+ if (ret < 0)
+ goto err_free_leds;
+ }
+ dev_info(&pdev->dev, "MEN 140F21P00 BMC LED device enabled\n");
+
+ return 0;
+
+err_free_leds:
+ dev_err(&pdev->dev, "failed to register LED device\n");
+
+ for (i = i - 1; i >= 0; i--)
+ led_classdev_unregister(&leds[i].cdev);
+
+ return ret;
+}
+
+static int menf21bmc_led_remove(struct platform_device *pdev)
+{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(leds); i++)
+ led_classdev_unregister(&leds[i].cdev);
+
+ return 0;
+}
+
+static struct platform_driver menf21bmc_led = {
+ .probe = menf21bmc_led_probe,
+ .remove = menf21bmc_led_remove,
+ .driver = {
+ .name = "menf21bmc_led",
+ },
+};
+
+module_platform_driver(menf21bmc_led);
+
+MODULE_AUTHOR("Andreas Werner <andreas.werner@men.de>");
+MODULE_DESCRIPTION("MEN 14F021P00 BMC led driver");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:menf21bmc_led");
diff --git a/kernel/drivers/leds/leds-net48xx.c b/kernel/drivers/leds/leds-net48xx.c
new file mode 100644
index 000000000..ec3a2e8ad
--- /dev/null
+++ b/kernel/drivers/leds/leds-net48xx.c
@@ -0,0 +1,96 @@
+/*
+ * LEDs driver for Soekris net48xx
+ *
+ * Copyright (C) 2006 Chris Boot <bootc@bootc.net>
+ *
+ * Based on leds-ams-delta.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/leds.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/nsc_gpio.h>
+#include <linux/scx200_gpio.h>
+#include <linux/module.h>
+
+#define DRVNAME "net48xx-led"
+#define NET48XX_ERROR_LED_GPIO 20
+
+static struct platform_device *pdev;
+
+static void net48xx_error_led_set(struct led_classdev *led_cdev,
+ enum led_brightness value)
+{
+ scx200_gpio_ops.gpio_set(NET48XX_ERROR_LED_GPIO, value ? 1 : 0);
+}
+
+static struct led_classdev net48xx_error_led = {
+ .name = "net48xx::error",
+ .brightness_set = net48xx_error_led_set,
+ .flags = LED_CORE_SUSPENDRESUME,
+};
+
+static int net48xx_led_probe(struct platform_device *pdev)
+{
+ return led_classdev_register(&pdev->dev, &net48xx_error_led);
+}
+
+static int net48xx_led_remove(struct platform_device *pdev)
+{
+ led_classdev_unregister(&net48xx_error_led);
+ return 0;
+}
+
+static struct platform_driver net48xx_led_driver = {
+ .probe = net48xx_led_probe,
+ .remove = net48xx_led_remove,
+ .driver = {
+ .name = DRVNAME,
+ },
+};
+
+static int __init net48xx_led_init(void)
+{
+ int ret;
+
+ /* small hack, but scx200_gpio doesn't set .dev if the probe fails */
+ if (!scx200_gpio_ops.dev) {
+ ret = -ENODEV;
+ goto out;
+ }
+
+ ret = platform_driver_register(&net48xx_led_driver);
+ if (ret < 0)
+ goto out;
+
+ pdev = platform_device_register_simple(DRVNAME, -1, NULL, 0);
+ if (IS_ERR(pdev)) {
+ ret = PTR_ERR(pdev);
+ platform_driver_unregister(&net48xx_led_driver);
+ goto out;
+ }
+
+out:
+ return ret;
+}
+
+static void __exit net48xx_led_exit(void)
+{
+ platform_device_unregister(pdev);
+ platform_driver_unregister(&net48xx_led_driver);
+}
+
+module_init(net48xx_led_init);
+module_exit(net48xx_led_exit);
+
+MODULE_AUTHOR("Chris Boot <bootc@bootc.net>");
+MODULE_DESCRIPTION("Soekris net48xx LED driver");
+MODULE_LICENSE("GPL");
+
diff --git a/kernel/drivers/leds/leds-netxbig.c b/kernel/drivers/leds/leds-netxbig.c
new file mode 100644
index 000000000..25e419752
--- /dev/null
+++ b/kernel/drivers/leds/leds-netxbig.c
@@ -0,0 +1,415 @@
+/*
+ * leds-netxbig.c - Driver for the 2Big and 5Big Network series LEDs
+ *
+ * Copyright (C) 2010 LaCie
+ *
+ * Author: Simon Guinot <sguinot@lacie.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/module.h>
+#include <linux/irq.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+#include <linux/leds.h>
+#include <linux/platform_data/leds-kirkwood-netxbig.h>
+
+/*
+ * GPIO extension bus.
+ */
+
+static DEFINE_SPINLOCK(gpio_ext_lock);
+
+static void gpio_ext_set_addr(struct netxbig_gpio_ext *gpio_ext, int addr)
+{
+ int pin;
+
+ for (pin = 0; pin < gpio_ext->num_addr; pin++)
+ gpio_set_value(gpio_ext->addr[pin], (addr >> pin) & 1);
+}
+
+static void gpio_ext_set_data(struct netxbig_gpio_ext *gpio_ext, int data)
+{
+ int pin;
+
+ for (pin = 0; pin < gpio_ext->num_data; pin++)
+ gpio_set_value(gpio_ext->data[pin], (data >> pin) & 1);
+}
+
+static void gpio_ext_enable_select(struct netxbig_gpio_ext *gpio_ext)
+{
+ /* Enable select is done on the raising edge. */
+ gpio_set_value(gpio_ext->enable, 0);
+ gpio_set_value(gpio_ext->enable, 1);
+}
+
+static void gpio_ext_set_value(struct netxbig_gpio_ext *gpio_ext,
+ int addr, int value)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&gpio_ext_lock, flags);
+ gpio_ext_set_addr(gpio_ext, addr);
+ gpio_ext_set_data(gpio_ext, value);
+ gpio_ext_enable_select(gpio_ext);
+ spin_unlock_irqrestore(&gpio_ext_lock, flags);
+}
+
+static int gpio_ext_init(struct netxbig_gpio_ext *gpio_ext)
+{
+ int err;
+ int i;
+
+ if (unlikely(!gpio_ext))
+ return -EINVAL;
+
+ /* Configure address GPIOs. */
+ for (i = 0; i < gpio_ext->num_addr; i++) {
+ err = gpio_request_one(gpio_ext->addr[i], GPIOF_OUT_INIT_LOW,
+ "GPIO extension addr");
+ if (err)
+ goto err_free_addr;
+ }
+ /* Configure data GPIOs. */
+ for (i = 0; i < gpio_ext->num_data; i++) {
+ err = gpio_request_one(gpio_ext->data[i], GPIOF_OUT_INIT_LOW,
+ "GPIO extension data");
+ if (err)
+ goto err_free_data;
+ }
+ /* Configure "enable select" GPIO. */
+ err = gpio_request_one(gpio_ext->enable, GPIOF_OUT_INIT_LOW,
+ "GPIO extension enable");
+ if (err)
+ goto err_free_data;
+
+ return 0;
+
+err_free_data:
+ for (i = i - 1; i >= 0; i--)
+ gpio_free(gpio_ext->data[i]);
+ i = gpio_ext->num_addr;
+err_free_addr:
+ for (i = i - 1; i >= 0; i--)
+ gpio_free(gpio_ext->addr[i]);
+
+ return err;
+}
+
+static void gpio_ext_free(struct netxbig_gpio_ext *gpio_ext)
+{
+ int i;
+
+ gpio_free(gpio_ext->enable);
+ for (i = gpio_ext->num_addr - 1; i >= 0; i--)
+ gpio_free(gpio_ext->addr[i]);
+ for (i = gpio_ext->num_data - 1; i >= 0; i--)
+ gpio_free(gpio_ext->data[i]);
+}
+
+/*
+ * Class LED driver.
+ */
+
+struct netxbig_led_data {
+ struct netxbig_gpio_ext *gpio_ext;
+ struct led_classdev cdev;
+ int mode_addr;
+ int *mode_val;
+ int bright_addr;
+ int bright_max;
+ struct netxbig_led_timer *timer;
+ int num_timer;
+ enum netxbig_led_mode mode;
+ int sata;
+ spinlock_t lock;
+};
+
+static int netxbig_led_get_timer_mode(enum netxbig_led_mode *mode,
+ unsigned long delay_on,
+ unsigned long delay_off,
+ struct netxbig_led_timer *timer,
+ int num_timer)
+{
+ int i;
+
+ for (i = 0; i < num_timer; i++) {
+ if (timer[i].delay_on == delay_on &&
+ timer[i].delay_off == delay_off) {
+ *mode = timer[i].mode;
+ return 0;
+ }
+ }
+ return -EINVAL;
+}
+
+static int netxbig_led_blink_set(struct led_classdev *led_cdev,
+ unsigned long *delay_on,
+ unsigned long *delay_off)
+{
+ struct netxbig_led_data *led_dat =
+ container_of(led_cdev, struct netxbig_led_data, cdev);
+ enum netxbig_led_mode mode;
+ int mode_val;
+ int ret;
+
+ /* Look for a LED mode with the requested timer frequency. */
+ ret = netxbig_led_get_timer_mode(&mode, *delay_on, *delay_off,
+ led_dat->timer, led_dat->num_timer);
+ if (ret < 0)
+ return ret;
+
+ mode_val = led_dat->mode_val[mode];
+ if (mode_val == NETXBIG_LED_INVALID_MODE)
+ return -EINVAL;
+
+ spin_lock_irq(&led_dat->lock);
+
+ gpio_ext_set_value(led_dat->gpio_ext, led_dat->mode_addr, mode_val);
+ led_dat->mode = mode;
+
+ spin_unlock_irq(&led_dat->lock);
+
+ return 0;
+}
+
+static void netxbig_led_set(struct led_classdev *led_cdev,
+ enum led_brightness value)
+{
+ struct netxbig_led_data *led_dat =
+ container_of(led_cdev, struct netxbig_led_data, cdev);
+ enum netxbig_led_mode mode;
+ int mode_val, bright_val;
+ int set_brightness = 1;
+ unsigned long flags;
+
+ spin_lock_irqsave(&led_dat->lock, flags);
+
+ if (value == LED_OFF) {
+ mode = NETXBIG_LED_OFF;
+ set_brightness = 0;
+ } else {
+ if (led_dat->sata)
+ mode = NETXBIG_LED_SATA;
+ else if (led_dat->mode == NETXBIG_LED_OFF)
+ mode = NETXBIG_LED_ON;
+ else /* Keep 'timer' mode. */
+ mode = led_dat->mode;
+ }
+ mode_val = led_dat->mode_val[mode];
+
+ gpio_ext_set_value(led_dat->gpio_ext, led_dat->mode_addr, mode_val);
+ led_dat->mode = mode;
+ /*
+ * Note that the brightness register is shared between all the
+ * SATA LEDs. So, change the brightness setting for a single
+ * SATA LED will affect all the others.
+ */
+ if (set_brightness) {
+ bright_val = DIV_ROUND_UP(value * led_dat->bright_max,
+ LED_FULL);
+ gpio_ext_set_value(led_dat->gpio_ext,
+ led_dat->bright_addr, bright_val);
+ }
+
+ spin_unlock_irqrestore(&led_dat->lock, flags);
+}
+
+static ssize_t netxbig_led_sata_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buff, size_t count)
+{
+ struct led_classdev *led_cdev = dev_get_drvdata(dev);
+ struct netxbig_led_data *led_dat =
+ container_of(led_cdev, struct netxbig_led_data, cdev);
+ unsigned long enable;
+ enum netxbig_led_mode mode;
+ int mode_val;
+ int ret;
+
+ ret = kstrtoul(buff, 10, &enable);
+ if (ret < 0)
+ return ret;
+
+ enable = !!enable;
+
+ spin_lock_irq(&led_dat->lock);
+
+ if (led_dat->sata == enable) {
+ ret = count;
+ goto exit_unlock;
+ }
+
+ if (led_dat->mode != NETXBIG_LED_ON &&
+ led_dat->mode != NETXBIG_LED_SATA)
+ mode = led_dat->mode; /* Keep modes 'off' and 'timer'. */
+ else if (enable)
+ mode = NETXBIG_LED_SATA;
+ else
+ mode = NETXBIG_LED_ON;
+
+ mode_val = led_dat->mode_val[mode];
+ if (mode_val == NETXBIG_LED_INVALID_MODE) {
+ ret = -EINVAL;
+ goto exit_unlock;
+ }
+
+ gpio_ext_set_value(led_dat->gpio_ext, led_dat->mode_addr, mode_val);
+ led_dat->mode = mode;
+ led_dat->sata = enable;
+
+ ret = count;
+
+exit_unlock:
+ spin_unlock_irq(&led_dat->lock);
+
+ return ret;
+}
+
+static ssize_t netxbig_led_sata_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct led_classdev *led_cdev = dev_get_drvdata(dev);
+ struct netxbig_led_data *led_dat =
+ container_of(led_cdev, struct netxbig_led_data, cdev);
+
+ return sprintf(buf, "%d\n", led_dat->sata);
+}
+
+static DEVICE_ATTR(sata, 0644, netxbig_led_sata_show, netxbig_led_sata_store);
+
+static struct attribute *netxbig_led_attrs[] = {
+ &dev_attr_sata.attr,
+ NULL
+};
+ATTRIBUTE_GROUPS(netxbig_led);
+
+static void delete_netxbig_led(struct netxbig_led_data *led_dat)
+{
+ led_classdev_unregister(&led_dat->cdev);
+}
+
+static int
+create_netxbig_led(struct platform_device *pdev,
+ struct netxbig_led_data *led_dat,
+ const struct netxbig_led *template)
+{
+ struct netxbig_led_platform_data *pdata = dev_get_platdata(&pdev->dev);
+
+ spin_lock_init(&led_dat->lock);
+ led_dat->gpio_ext = pdata->gpio_ext;
+ led_dat->cdev.name = template->name;
+ led_dat->cdev.default_trigger = template->default_trigger;
+ led_dat->cdev.blink_set = netxbig_led_blink_set;
+ led_dat->cdev.brightness_set = netxbig_led_set;
+ /*
+ * Because the GPIO extension bus don't allow to read registers
+ * value, there is no way to probe the LED initial state.
+ * So, the initial sysfs LED value for the "brightness" and "sata"
+ * attributes are inconsistent.
+ *
+ * Note that the initial LED state can't be reconfigured.
+ * The reason is that the LED behaviour must stay uniform during
+ * the whole boot process (bootloader+linux).
+ */
+ led_dat->sata = 0;
+ led_dat->cdev.brightness = LED_OFF;
+ led_dat->cdev.flags |= LED_CORE_SUSPENDRESUME;
+ led_dat->mode_addr = template->mode_addr;
+ led_dat->mode_val = template->mode_val;
+ led_dat->bright_addr = template->bright_addr;
+ led_dat->bright_max = (1 << pdata->gpio_ext->num_data) - 1;
+ led_dat->timer = pdata->timer;
+ led_dat->num_timer = pdata->num_timer;
+ /*
+ * If available, expose the SATA activity blink capability through
+ * a "sata" sysfs attribute.
+ */
+ if (led_dat->mode_val[NETXBIG_LED_SATA] != NETXBIG_LED_INVALID_MODE)
+ led_dat->cdev.groups = netxbig_led_groups;
+
+ return led_classdev_register(&pdev->dev, &led_dat->cdev);
+}
+
+static int netxbig_led_probe(struct platform_device *pdev)
+{
+ struct netxbig_led_platform_data *pdata = dev_get_platdata(&pdev->dev);
+ struct netxbig_led_data *leds_data;
+ int i;
+ int ret;
+
+ if (!pdata)
+ return -EINVAL;
+
+ leds_data = devm_kzalloc(&pdev->dev,
+ sizeof(struct netxbig_led_data) * pdata->num_leds, GFP_KERNEL);
+ if (!leds_data)
+ return -ENOMEM;
+
+ ret = gpio_ext_init(pdata->gpio_ext);
+ if (ret < 0)
+ return ret;
+
+ for (i = 0; i < pdata->num_leds; i++) {
+ ret = create_netxbig_led(pdev, &leds_data[i], &pdata->leds[i]);
+ if (ret < 0)
+ goto err_free_leds;
+ }
+
+ platform_set_drvdata(pdev, leds_data);
+
+ return 0;
+
+err_free_leds:
+ for (i = i - 1; i >= 0; i--)
+ delete_netxbig_led(&leds_data[i]);
+
+ gpio_ext_free(pdata->gpio_ext);
+ return ret;
+}
+
+static int netxbig_led_remove(struct platform_device *pdev)
+{
+ struct netxbig_led_platform_data *pdata = dev_get_platdata(&pdev->dev);
+ struct netxbig_led_data *leds_data;
+ int i;
+
+ leds_data = platform_get_drvdata(pdev);
+
+ for (i = 0; i < pdata->num_leds; i++)
+ delete_netxbig_led(&leds_data[i]);
+
+ gpio_ext_free(pdata->gpio_ext);
+
+ return 0;
+}
+
+static struct platform_driver netxbig_led_driver = {
+ .probe = netxbig_led_probe,
+ .remove = netxbig_led_remove,
+ .driver = {
+ .name = "leds-netxbig",
+ },
+};
+
+module_platform_driver(netxbig_led_driver);
+
+MODULE_AUTHOR("Simon Guinot <sguinot@lacie.com>");
+MODULE_DESCRIPTION("LED driver for LaCie xBig Network boards");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:leds-netxbig");
diff --git a/kernel/drivers/leds/leds-ns2.c b/kernel/drivers/leds/leds-ns2.c
new file mode 100644
index 000000000..1fd6adbb4
--- /dev/null
+++ b/kernel/drivers/leds/leds-ns2.c
@@ -0,0 +1,392 @@
+/*
+ * leds-ns2.c - Driver for the Network Space v2 (and parents) dual-GPIO LED
+ *
+ * Copyright (C) 2010 LaCie
+ *
+ * Author: Simon Guinot <sguinot@lacie.com>
+ *
+ * Based on leds-gpio.c by Raphael Assenat <raph@8d.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/gpio.h>
+#include <linux/leds.h>
+#include <linux/module.h>
+#include <linux/platform_data/leds-kirkwood-ns2.h>
+#include <linux/of.h>
+#include <linux/of_gpio.h>
+
+/*
+ * The Network Space v2 dual-GPIO LED is wired to a CPLD and can blink in
+ * relation with the SATA activity. This capability is exposed through the
+ * "sata" sysfs attribute.
+ *
+ * The following array detail the different LED registers and the combination
+ * of their possible values:
+ *
+ * cmd_led | slow_led | /SATA active | LED state
+ * | | |
+ * 1 | 0 | x | off
+ * - | 1 | x | on
+ * 0 | 0 | 1 | on
+ * 0 | 0 | 0 | blink (rate 300ms)
+ */
+
+enum ns2_led_modes {
+ NS_V2_LED_OFF,
+ NS_V2_LED_ON,
+ NS_V2_LED_SATA,
+};
+
+struct ns2_led_mode_value {
+ enum ns2_led_modes mode;
+ int cmd_level;
+ int slow_level;
+};
+
+static struct ns2_led_mode_value ns2_led_modval[] = {
+ { NS_V2_LED_OFF , 1, 0 },
+ { NS_V2_LED_ON , 0, 1 },
+ { NS_V2_LED_ON , 1, 1 },
+ { NS_V2_LED_SATA, 0, 0 },
+};
+
+struct ns2_led_data {
+ struct led_classdev cdev;
+ unsigned cmd;
+ unsigned slow;
+ unsigned char sata; /* True when SATA mode active. */
+ rwlock_t rw_lock; /* Lock GPIOs. */
+};
+
+static int ns2_led_get_mode(struct ns2_led_data *led_dat,
+ enum ns2_led_modes *mode)
+{
+ int i;
+ int ret = -EINVAL;
+ int cmd_level;
+ int slow_level;
+
+ read_lock_irq(&led_dat->rw_lock);
+
+ cmd_level = gpio_get_value(led_dat->cmd);
+ slow_level = gpio_get_value(led_dat->slow);
+
+ for (i = 0; i < ARRAY_SIZE(ns2_led_modval); i++) {
+ if (cmd_level == ns2_led_modval[i].cmd_level &&
+ slow_level == ns2_led_modval[i].slow_level) {
+ *mode = ns2_led_modval[i].mode;
+ ret = 0;
+ break;
+ }
+ }
+
+ read_unlock_irq(&led_dat->rw_lock);
+
+ return ret;
+}
+
+static void ns2_led_set_mode(struct ns2_led_data *led_dat,
+ enum ns2_led_modes mode)
+{
+ int i;
+ unsigned long flags;
+
+ write_lock_irqsave(&led_dat->rw_lock, flags);
+
+ for (i = 0; i < ARRAY_SIZE(ns2_led_modval); i++) {
+ if (mode == ns2_led_modval[i].mode) {
+ gpio_set_value(led_dat->cmd,
+ ns2_led_modval[i].cmd_level);
+ gpio_set_value(led_dat->slow,
+ ns2_led_modval[i].slow_level);
+ }
+ }
+
+ write_unlock_irqrestore(&led_dat->rw_lock, flags);
+}
+
+static void ns2_led_set(struct led_classdev *led_cdev,
+ enum led_brightness value)
+{
+ struct ns2_led_data *led_dat =
+ container_of(led_cdev, struct ns2_led_data, cdev);
+ enum ns2_led_modes mode;
+
+ if (value == LED_OFF)
+ mode = NS_V2_LED_OFF;
+ else if (led_dat->sata)
+ mode = NS_V2_LED_SATA;
+ else
+ mode = NS_V2_LED_ON;
+
+ ns2_led_set_mode(led_dat, mode);
+}
+
+static ssize_t ns2_led_sata_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buff, size_t count)
+{
+ struct led_classdev *led_cdev = dev_get_drvdata(dev);
+ struct ns2_led_data *led_dat =
+ container_of(led_cdev, struct ns2_led_data, cdev);
+ int ret;
+ unsigned long enable;
+ enum ns2_led_modes mode;
+
+ ret = kstrtoul(buff, 10, &enable);
+ if (ret < 0)
+ return ret;
+
+ enable = !!enable;
+
+ if (led_dat->sata == enable)
+ return count;
+
+ ret = ns2_led_get_mode(led_dat, &mode);
+ if (ret < 0)
+ return ret;
+
+ if (enable && mode == NS_V2_LED_ON)
+ ns2_led_set_mode(led_dat, NS_V2_LED_SATA);
+ if (!enable && mode == NS_V2_LED_SATA)
+ ns2_led_set_mode(led_dat, NS_V2_LED_ON);
+
+ led_dat->sata = enable;
+
+ return count;
+}
+
+static ssize_t ns2_led_sata_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct led_classdev *led_cdev = dev_get_drvdata(dev);
+ struct ns2_led_data *led_dat =
+ container_of(led_cdev, struct ns2_led_data, cdev);
+
+ return sprintf(buf, "%d\n", led_dat->sata);
+}
+
+static DEVICE_ATTR(sata, 0644, ns2_led_sata_show, ns2_led_sata_store);
+
+static struct attribute *ns2_led_attrs[] = {
+ &dev_attr_sata.attr,
+ NULL
+};
+ATTRIBUTE_GROUPS(ns2_led);
+
+static int
+create_ns2_led(struct platform_device *pdev, struct ns2_led_data *led_dat,
+ const struct ns2_led *template)
+{
+ int ret;
+ enum ns2_led_modes mode;
+
+ ret = devm_gpio_request_one(&pdev->dev, template->cmd,
+ gpio_get_value(template->cmd) ?
+ GPIOF_OUT_INIT_HIGH : GPIOF_OUT_INIT_LOW,
+ template->name);
+ if (ret) {
+ dev_err(&pdev->dev, "%s: failed to setup command GPIO\n",
+ template->name);
+ return ret;
+ }
+
+ ret = devm_gpio_request_one(&pdev->dev, template->slow,
+ gpio_get_value(template->slow) ?
+ GPIOF_OUT_INIT_HIGH : GPIOF_OUT_INIT_LOW,
+ template->name);
+ if (ret) {
+ dev_err(&pdev->dev, "%s: failed to setup slow GPIO\n",
+ template->name);
+ return ret;
+ }
+
+ rwlock_init(&led_dat->rw_lock);
+
+ led_dat->cdev.name = template->name;
+ led_dat->cdev.default_trigger = template->default_trigger;
+ led_dat->cdev.blink_set = NULL;
+ led_dat->cdev.brightness_set = ns2_led_set;
+ led_dat->cdev.flags |= LED_CORE_SUSPENDRESUME;
+ led_dat->cdev.groups = ns2_led_groups;
+ led_dat->cmd = template->cmd;
+ led_dat->slow = template->slow;
+
+ ret = ns2_led_get_mode(led_dat, &mode);
+ if (ret < 0)
+ return ret;
+
+ /* Set LED initial state. */
+ led_dat->sata = (mode == NS_V2_LED_SATA) ? 1 : 0;
+ led_dat->cdev.brightness =
+ (mode == NS_V2_LED_OFF) ? LED_OFF : LED_FULL;
+
+ ret = led_classdev_register(&pdev->dev, &led_dat->cdev);
+ if (ret < 0)
+ return ret;
+
+ return 0;
+}
+
+static void delete_ns2_led(struct ns2_led_data *led_dat)
+{
+ led_classdev_unregister(&led_dat->cdev);
+}
+
+#ifdef CONFIG_OF_GPIO
+/*
+ * Translate OpenFirmware node properties into platform_data.
+ */
+static int
+ns2_leds_get_of_pdata(struct device *dev, struct ns2_led_platform_data *pdata)
+{
+ struct device_node *np = dev->of_node;
+ struct device_node *child;
+ struct ns2_led *leds;
+ int num_leds = 0;
+ int i = 0;
+
+ num_leds = of_get_child_count(np);
+ if (!num_leds)
+ return -ENODEV;
+
+ leds = devm_kzalloc(dev, num_leds * sizeof(struct ns2_led),
+ GFP_KERNEL);
+ if (!leds)
+ return -ENOMEM;
+
+ for_each_child_of_node(np, child) {
+ const char *string;
+ int ret;
+
+ ret = of_get_named_gpio(child, "cmd-gpio", 0);
+ if (ret < 0)
+ return ret;
+ leds[i].cmd = ret;
+ ret = of_get_named_gpio(child, "slow-gpio", 0);
+ if (ret < 0)
+ return ret;
+ leds[i].slow = ret;
+ ret = of_property_read_string(child, "label", &string);
+ leds[i].name = (ret == 0) ? string : child->name;
+ ret = of_property_read_string(child, "linux,default-trigger",
+ &string);
+ if (ret == 0)
+ leds[i].default_trigger = string;
+
+ i++;
+ }
+
+ pdata->leds = leds;
+ pdata->num_leds = num_leds;
+
+ return 0;
+}
+
+static const struct of_device_id of_ns2_leds_match[] = {
+ { .compatible = "lacie,ns2-leds", },
+ {},
+};
+#endif /* CONFIG_OF_GPIO */
+
+struct ns2_led_priv {
+ int num_leds;
+ struct ns2_led_data leds_data[];
+};
+
+static inline int sizeof_ns2_led_priv(int num_leds)
+{
+ return sizeof(struct ns2_led_priv) +
+ (sizeof(struct ns2_led_data) * num_leds);
+}
+
+static int ns2_led_probe(struct platform_device *pdev)
+{
+ struct ns2_led_platform_data *pdata = dev_get_platdata(&pdev->dev);
+ struct ns2_led_priv *priv;
+ int i;
+ int ret;
+
+#ifdef CONFIG_OF_GPIO
+ if (!pdata) {
+ pdata = devm_kzalloc(&pdev->dev,
+ sizeof(struct ns2_led_platform_data),
+ GFP_KERNEL);
+ if (!pdata)
+ return -ENOMEM;
+
+ ret = ns2_leds_get_of_pdata(&pdev->dev, pdata);
+ if (ret)
+ return ret;
+ }
+#else
+ if (!pdata)
+ return -EINVAL;
+#endif /* CONFIG_OF_GPIO */
+
+ priv = devm_kzalloc(&pdev->dev,
+ sizeof_ns2_led_priv(pdata->num_leds), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+ priv->num_leds = pdata->num_leds;
+
+ for (i = 0; i < priv->num_leds; i++) {
+ ret = create_ns2_led(pdev, &priv->leds_data[i],
+ &pdata->leds[i]);
+ if (ret < 0) {
+ for (i = i - 1; i >= 0; i--)
+ delete_ns2_led(&priv->leds_data[i]);
+ return ret;
+ }
+ }
+
+ platform_set_drvdata(pdev, priv);
+
+ return 0;
+}
+
+static int ns2_led_remove(struct platform_device *pdev)
+{
+ int i;
+ struct ns2_led_priv *priv;
+
+ priv = platform_get_drvdata(pdev);
+
+ for (i = 0; i < priv->num_leds; i++)
+ delete_ns2_led(&priv->leds_data[i]);
+
+ return 0;
+}
+
+static struct platform_driver ns2_led_driver = {
+ .probe = ns2_led_probe,
+ .remove = ns2_led_remove,
+ .driver = {
+ .name = "leds-ns2",
+ .of_match_table = of_match_ptr(of_ns2_leds_match),
+ },
+};
+
+module_platform_driver(ns2_led_driver);
+
+MODULE_AUTHOR("Simon Guinot <sguinot@lacie.com>");
+MODULE_DESCRIPTION("Network Space v2 LED driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:leds-ns2");
diff --git a/kernel/drivers/leds/leds-ot200.c b/kernel/drivers/leds/leds-ot200.c
new file mode 100644
index 000000000..39870de20
--- /dev/null
+++ b/kernel/drivers/leds/leds-ot200.c
@@ -0,0 +1,169 @@
+/*
+ * Bachmann ot200 leds driver.
+ *
+ * Author: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
+ * Christian Gmeiner <christian.gmeiner@gmail.com>
+ *
+ * License: GPL as published by the FSF.
+ */
+
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/leds.h>
+#include <linux/io.h>
+#include <linux/module.h>
+
+
+struct ot200_led {
+ struct led_classdev cdev;
+ const char *name;
+ unsigned long port;
+ u8 mask;
+};
+
+/*
+ * The device has three leds on the back panel (led_err, led_init and led_run)
+ * and can handle up to seven leds on the front panel.
+ */
+
+static struct ot200_led leds[] = {
+ {
+ .name = "led_run",
+ .port = 0x5a,
+ .mask = BIT(0),
+ },
+ {
+ .name = "led_init",
+ .port = 0x5a,
+ .mask = BIT(1),
+ },
+ {
+ .name = "led_err",
+ .port = 0x5a,
+ .mask = BIT(2),
+ },
+ {
+ .name = "led_1",
+ .port = 0x49,
+ .mask = BIT(6),
+ },
+ {
+ .name = "led_2",
+ .port = 0x49,
+ .mask = BIT(5),
+ },
+ {
+ .name = "led_3",
+ .port = 0x49,
+ .mask = BIT(4),
+ },
+ {
+ .name = "led_4",
+ .port = 0x49,
+ .mask = BIT(3),
+ },
+ {
+ .name = "led_5",
+ .port = 0x49,
+ .mask = BIT(2),
+ },
+ {
+ .name = "led_6",
+ .port = 0x49,
+ .mask = BIT(1),
+ },
+ {
+ .name = "led_7",
+ .port = 0x49,
+ .mask = BIT(0),
+ }
+};
+
+static DEFINE_SPINLOCK(value_lock);
+
+/*
+ * we need to store the current led states, as it is not
+ * possible to read the current led state via inb().
+ */
+static u8 leds_back;
+static u8 leds_front;
+
+static void ot200_led_brightness_set(struct led_classdev *led_cdev,
+ enum led_brightness value)
+{
+ struct ot200_led *led = container_of(led_cdev, struct ot200_led, cdev);
+ u8 *val;
+ unsigned long flags;
+
+ spin_lock_irqsave(&value_lock, flags);
+
+ if (led->port == 0x49)
+ val = &leds_front;
+ else if (led->port == 0x5a)
+ val = &leds_back;
+ else
+ BUG();
+
+ if (value == LED_OFF)
+ *val &= ~led->mask;
+ else
+ *val |= led->mask;
+
+ outb(*val, led->port);
+ spin_unlock_irqrestore(&value_lock, flags);
+}
+
+static int ot200_led_probe(struct platform_device *pdev)
+{
+ int i;
+ int ret;
+
+ for (i = 0; i < ARRAY_SIZE(leds); i++) {
+
+ leds[i].cdev.name = leds[i].name;
+ leds[i].cdev.brightness_set = ot200_led_brightness_set;
+
+ ret = led_classdev_register(&pdev->dev, &leds[i].cdev);
+ if (ret < 0)
+ goto err;
+ }
+
+ leds_front = 0; /* turn off all front leds */
+ leds_back = BIT(1); /* turn on init led */
+ outb(leds_front, 0x49);
+ outb(leds_back, 0x5a);
+
+ return 0;
+
+err:
+ for (i = i - 1; i >= 0; i--)
+ led_classdev_unregister(&leds[i].cdev);
+
+ return ret;
+}
+
+static int ot200_led_remove(struct platform_device *pdev)
+{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(leds); i++)
+ led_classdev_unregister(&leds[i].cdev);
+
+ return 0;
+}
+
+static struct platform_driver ot200_led_driver = {
+ .probe = ot200_led_probe,
+ .remove = ot200_led_remove,
+ .driver = {
+ .name = "leds-ot200",
+ },
+};
+
+module_platform_driver(ot200_led_driver);
+
+MODULE_AUTHOR("Sebastian A. Siewior <bigeasy@linutronix.de>");
+MODULE_DESCRIPTION("ot200 LED driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:leds-ot200");
diff --git a/kernel/drivers/leds/leds-pca9532.c b/kernel/drivers/leds/leds-pca9532.c
new file mode 100644
index 000000000..5a6363d16
--- /dev/null
+++ b/kernel/drivers/leds/leds-pca9532.c
@@ -0,0 +1,483 @@
+/*
+ * pca9532.c - 16-bit Led dimmer
+ *
+ * Copyright (C) 2011 Jan Weitzel
+ * Copyright (C) 2008 Riku Voipio
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * Datasheet: http://www.nxp.com/documents/data_sheet/PCA9532.pdf
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/i2c.h>
+#include <linux/slab.h>
+#include <linux/leds.h>
+#include <linux/input.h>
+#include <linux/mutex.h>
+#include <linux/workqueue.h>
+#include <linux/leds-pca9532.h>
+#include <linux/gpio.h>
+
+/* m = num_leds*/
+#define PCA9532_REG_INPUT(i) ((i) >> 3)
+#define PCA9532_REG_OFFSET(m) ((m) >> 4)
+#define PCA9532_REG_PSC(m, i) (PCA9532_REG_OFFSET(m) + 0x1 + (i) * 2)
+#define PCA9532_REG_PWM(m, i) (PCA9532_REG_OFFSET(m) + 0x2 + (i) * 2)
+#define LED_REG(m, led) (PCA9532_REG_OFFSET(m) + 0x5 + (led >> 2))
+#define LED_NUM(led) (led & 0x3)
+
+#define ldev_to_led(c) container_of(c, struct pca9532_led, ldev)
+
+struct pca9532_chip_info {
+ u8 num_leds;
+};
+
+struct pca9532_data {
+ struct i2c_client *client;
+ struct pca9532_led leds[16];
+ struct mutex update_lock;
+ struct input_dev *idev;
+ struct work_struct work;
+#ifdef CONFIG_LEDS_PCA9532_GPIO
+ struct gpio_chip gpio;
+#endif
+ const struct pca9532_chip_info *chip_info;
+ u8 pwm[2];
+ u8 psc[2];
+};
+
+static int pca9532_probe(struct i2c_client *client,
+ const struct i2c_device_id *id);
+static int pca9532_remove(struct i2c_client *client);
+
+enum {
+ pca9530,
+ pca9531,
+ pca9532,
+ pca9533,
+};
+
+static const struct i2c_device_id pca9532_id[] = {
+ { "pca9530", pca9530 },
+ { "pca9531", pca9531 },
+ { "pca9532", pca9532 },
+ { "pca9533", pca9533 },
+ { }
+};
+
+MODULE_DEVICE_TABLE(i2c, pca9532_id);
+
+static const struct pca9532_chip_info pca9532_chip_info_tbl[] = {
+ [pca9530] = {
+ .num_leds = 2,
+ },
+ [pca9531] = {
+ .num_leds = 8,
+ },
+ [pca9532] = {
+ .num_leds = 16,
+ },
+ [pca9533] = {
+ .num_leds = 4,
+ },
+};
+
+static struct i2c_driver pca9532_driver = {
+ .driver = {
+ .name = "leds-pca953x",
+ },
+ .probe = pca9532_probe,
+ .remove = pca9532_remove,
+ .id_table = pca9532_id,
+};
+
+/* We have two pwm/blinkers, but 16 possible leds to drive. Additionally,
+ * the clever Thecus people are using one pwm to drive the beeper. So,
+ * as a compromise we average one pwm to the values requested by all
+ * leds that are not ON/OFF.
+ * */
+static int pca9532_calcpwm(struct i2c_client *client, int pwm, int blink,
+ enum led_brightness value)
+{
+ int a = 0, b = 0, i = 0;
+ struct pca9532_data *data = i2c_get_clientdata(client);
+ for (i = 0; i < data->chip_info->num_leds; i++) {
+ if (data->leds[i].type == PCA9532_TYPE_LED &&
+ data->leds[i].state == PCA9532_PWM0+pwm) {
+ a++;
+ b += data->leds[i].ldev.brightness;
+ }
+ }
+ if (a == 0) {
+ dev_err(&client->dev,
+ "fear of division by zero %d/%d, wanted %d\n",
+ b, a, value);
+ return -EINVAL;
+ }
+ b = b/a;
+ if (b > 0xFF)
+ return -EINVAL;
+ data->pwm[pwm] = b;
+ data->psc[pwm] = blink;
+ return 0;
+}
+
+static int pca9532_setpwm(struct i2c_client *client, int pwm)
+{
+ struct pca9532_data *data = i2c_get_clientdata(client);
+ u8 maxleds = data->chip_info->num_leds;
+
+ mutex_lock(&data->update_lock);
+ i2c_smbus_write_byte_data(client, PCA9532_REG_PWM(maxleds, pwm),
+ data->pwm[pwm]);
+ i2c_smbus_write_byte_data(client, PCA9532_REG_PSC(maxleds, pwm),
+ data->psc[pwm]);
+ mutex_unlock(&data->update_lock);
+ return 0;
+}
+
+/* Set LED routing */
+static void pca9532_setled(struct pca9532_led *led)
+{
+ struct i2c_client *client = led->client;
+ struct pca9532_data *data = i2c_get_clientdata(client);
+ u8 maxleds = data->chip_info->num_leds;
+ char reg;
+
+ mutex_lock(&data->update_lock);
+ reg = i2c_smbus_read_byte_data(client, LED_REG(maxleds, led->id));
+ /* zero led bits */
+ reg = reg & ~(0x3<<LED_NUM(led->id)*2);
+ /* set the new value */
+ reg = reg | (led->state << LED_NUM(led->id)*2);
+ i2c_smbus_write_byte_data(client, LED_REG(maxleds, led->id), reg);
+ mutex_unlock(&data->update_lock);
+}
+
+static void pca9532_set_brightness(struct led_classdev *led_cdev,
+ enum led_brightness value)
+{
+ int err = 0;
+ struct pca9532_led *led = ldev_to_led(led_cdev);
+
+ if (value == LED_OFF)
+ led->state = PCA9532_OFF;
+ else if (value == LED_FULL)
+ led->state = PCA9532_ON;
+ else {
+ led->state = PCA9532_PWM0; /* Thecus: hardcode one pwm */
+ err = pca9532_calcpwm(led->client, 0, 0, value);
+ if (err)
+ return; /* XXX: led api doesn't allow error code? */
+ }
+ schedule_work(&led->work);
+}
+
+static int pca9532_set_blink(struct led_classdev *led_cdev,
+ unsigned long *delay_on, unsigned long *delay_off)
+{
+ struct pca9532_led *led = ldev_to_led(led_cdev);
+ struct i2c_client *client = led->client;
+ int psc;
+ int err = 0;
+
+ if (*delay_on == 0 && *delay_off == 0) {
+ /* led subsystem ask us for a blink rate */
+ *delay_on = 1000;
+ *delay_off = 1000;
+ }
+ if (*delay_on != *delay_off || *delay_on > 1690 || *delay_on < 6)
+ return -EINVAL;
+
+ /* Thecus specific: only use PSC/PWM 0 */
+ psc = (*delay_on * 152-1)/1000;
+ err = pca9532_calcpwm(client, 0, psc, led_cdev->brightness);
+ if (err)
+ return err;
+ schedule_work(&led->work);
+ return 0;
+}
+
+static int pca9532_event(struct input_dev *dev, unsigned int type,
+ unsigned int code, int value)
+{
+ struct pca9532_data *data = input_get_drvdata(dev);
+
+ if (!(type == EV_SND && (code == SND_BELL || code == SND_TONE)))
+ return -1;
+
+ /* XXX: allow different kind of beeps with psc/pwm modifications */
+ if (value > 1 && value < 32767)
+ data->pwm[1] = 127;
+ else
+ data->pwm[1] = 0;
+
+ schedule_work(&data->work);
+
+ return 0;
+}
+
+static void pca9532_input_work(struct work_struct *work)
+{
+ struct pca9532_data *data =
+ container_of(work, struct pca9532_data, work);
+ u8 maxleds = data->chip_info->num_leds;
+
+ mutex_lock(&data->update_lock);
+ i2c_smbus_write_byte_data(data->client, PCA9532_REG_PWM(maxleds, 1),
+ data->pwm[1]);
+ mutex_unlock(&data->update_lock);
+}
+
+static void pca9532_led_work(struct work_struct *work)
+{
+ struct pca9532_led *led;
+ led = container_of(work, struct pca9532_led, work);
+ if (led->state == PCA9532_PWM0)
+ pca9532_setpwm(led->client, 0);
+ pca9532_setled(led);
+}
+
+#ifdef CONFIG_LEDS_PCA9532_GPIO
+static int pca9532_gpio_request_pin(struct gpio_chip *gc, unsigned offset)
+{
+ struct pca9532_data *data = container_of(gc, struct pca9532_data, gpio);
+ struct pca9532_led *led = &data->leds[offset];
+
+ if (led->type == PCA9532_TYPE_GPIO)
+ return 0;
+
+ return -EBUSY;
+}
+
+static void pca9532_gpio_set_value(struct gpio_chip *gc, unsigned offset, int val)
+{
+ struct pca9532_data *data = container_of(gc, struct pca9532_data, gpio);
+ struct pca9532_led *led = &data->leds[offset];
+
+ if (val)
+ led->state = PCA9532_ON;
+ else
+ led->state = PCA9532_OFF;
+
+ pca9532_setled(led);
+}
+
+static int pca9532_gpio_get_value(struct gpio_chip *gc, unsigned offset)
+{
+ struct pca9532_data *data = container_of(gc, struct pca9532_data, gpio);
+ unsigned char reg;
+
+ reg = i2c_smbus_read_byte_data(data->client, PCA9532_REG_INPUT(offset));
+
+ return !!(reg & (1 << (offset % 8)));
+}
+
+static int pca9532_gpio_direction_input(struct gpio_chip *gc, unsigned offset)
+{
+ /* To use as input ensure pin is not driven */
+ pca9532_gpio_set_value(gc, offset, 0);
+
+ return 0;
+}
+
+static int pca9532_gpio_direction_output(struct gpio_chip *gc, unsigned offset, int val)
+{
+ pca9532_gpio_set_value(gc, offset, val);
+
+ return 0;
+}
+#endif /* CONFIG_LEDS_PCA9532_GPIO */
+
+static int pca9532_destroy_devices(struct pca9532_data *data, int n_devs)
+{
+ int i = n_devs;
+
+ if (!data)
+ return -EINVAL;
+
+ while (--i >= 0) {
+ switch (data->leds[i].type) {
+ case PCA9532_TYPE_NONE:
+ case PCA9532_TYPE_GPIO:
+ break;
+ case PCA9532_TYPE_LED:
+ led_classdev_unregister(&data->leds[i].ldev);
+ cancel_work_sync(&data->leds[i].work);
+ break;
+ case PCA9532_TYPE_N2100_BEEP:
+ if (data->idev != NULL) {
+ cancel_work_sync(&data->work);
+ data->idev = NULL;
+ }
+ break;
+ }
+ }
+
+#ifdef CONFIG_LEDS_PCA9532_GPIO
+ if (data->gpio.dev)
+ gpiochip_remove(&data->gpio);
+#endif
+
+ return 0;
+}
+
+static int pca9532_configure(struct i2c_client *client,
+ struct pca9532_data *data, struct pca9532_platform_data *pdata)
+{
+ int i, err = 0;
+ int gpios = 0;
+ u8 maxleds = data->chip_info->num_leds;
+
+ for (i = 0; i < 2; i++) {
+ data->pwm[i] = pdata->pwm[i];
+ data->psc[i] = pdata->psc[i];
+ i2c_smbus_write_byte_data(client, PCA9532_REG_PWM(maxleds, i),
+ data->pwm[i]);
+ i2c_smbus_write_byte_data(client, PCA9532_REG_PSC(maxleds, i),
+ data->psc[i]);
+ }
+
+ for (i = 0; i < data->chip_info->num_leds; i++) {
+ struct pca9532_led *led = &data->leds[i];
+ struct pca9532_led *pled = &pdata->leds[i];
+ led->client = client;
+ led->id = i;
+ led->type = pled->type;
+ switch (led->type) {
+ case PCA9532_TYPE_NONE:
+ break;
+ case PCA9532_TYPE_GPIO:
+ gpios++;
+ break;
+ case PCA9532_TYPE_LED:
+ led->state = pled->state;
+ led->name = pled->name;
+ led->ldev.name = led->name;
+ led->ldev.brightness = LED_OFF;
+ led->ldev.brightness_set = pca9532_set_brightness;
+ led->ldev.blink_set = pca9532_set_blink;
+ INIT_WORK(&led->work, pca9532_led_work);
+ err = led_classdev_register(&client->dev, &led->ldev);
+ if (err < 0) {
+ dev_err(&client->dev,
+ "couldn't register LED %s\n",
+ led->name);
+ goto exit;
+ }
+ pca9532_setled(led);
+ break;
+ case PCA9532_TYPE_N2100_BEEP:
+ BUG_ON(data->idev);
+ led->state = PCA9532_PWM1;
+ pca9532_setled(led);
+ data->idev = devm_input_allocate_device(&client->dev);
+ if (data->idev == NULL) {
+ err = -ENOMEM;
+ goto exit;
+ }
+ data->idev->name = pled->name;
+ data->idev->phys = "i2c/pca9532";
+ data->idev->id.bustype = BUS_HOST;
+ data->idev->id.vendor = 0x001f;
+ data->idev->id.product = 0x0001;
+ data->idev->id.version = 0x0100;
+ data->idev->evbit[0] = BIT_MASK(EV_SND);
+ data->idev->sndbit[0] = BIT_MASK(SND_BELL) |
+ BIT_MASK(SND_TONE);
+ data->idev->event = pca9532_event;
+ input_set_drvdata(data->idev, data);
+ INIT_WORK(&data->work, pca9532_input_work);
+ err = input_register_device(data->idev);
+ if (err) {
+ cancel_work_sync(&data->work);
+ data->idev = NULL;
+ goto exit;
+ }
+ break;
+ }
+ }
+
+#ifdef CONFIG_LEDS_PCA9532_GPIO
+ if (gpios) {
+ data->gpio.label = "gpio-pca9532";
+ data->gpio.direction_input = pca9532_gpio_direction_input;
+ data->gpio.direction_output = pca9532_gpio_direction_output;
+ data->gpio.set = pca9532_gpio_set_value;
+ data->gpio.get = pca9532_gpio_get_value;
+ data->gpio.request = pca9532_gpio_request_pin;
+ data->gpio.can_sleep = 1;
+ data->gpio.base = pdata->gpio_base;
+ data->gpio.ngpio = data->chip_info->num_leds;
+ data->gpio.dev = &client->dev;
+ data->gpio.owner = THIS_MODULE;
+
+ err = gpiochip_add(&data->gpio);
+ if (err) {
+ /* Use data->gpio.dev as a flag for freeing gpiochip */
+ data->gpio.dev = NULL;
+ dev_warn(&client->dev, "could not add gpiochip\n");
+ } else {
+ dev_info(&client->dev, "gpios %i...%i\n",
+ data->gpio.base, data->gpio.base +
+ data->gpio.ngpio - 1);
+ }
+ }
+#endif
+
+ return 0;
+
+exit:
+ pca9532_destroy_devices(data, i);
+ return err;
+}
+
+static int pca9532_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct pca9532_data *data = i2c_get_clientdata(client);
+ struct pca9532_platform_data *pca9532_pdata =
+ dev_get_platdata(&client->dev);
+
+ if (!pca9532_pdata)
+ return -EIO;
+
+ if (!i2c_check_functionality(client->adapter,
+ I2C_FUNC_SMBUS_BYTE_DATA))
+ return -EIO;
+
+ data = devm_kzalloc(&client->dev, sizeof(*data), GFP_KERNEL);
+ if (!data)
+ return -ENOMEM;
+
+ data->chip_info = &pca9532_chip_info_tbl[id->driver_data];
+
+ dev_info(&client->dev, "setting platform data\n");
+ i2c_set_clientdata(client, data);
+ data->client = client;
+ mutex_init(&data->update_lock);
+
+ return pca9532_configure(client, data, pca9532_pdata);
+}
+
+static int pca9532_remove(struct i2c_client *client)
+{
+ struct pca9532_data *data = i2c_get_clientdata(client);
+ int err;
+
+ err = pca9532_destroy_devices(data, data->chip_info->num_leds);
+ if (err)
+ return err;
+
+ return 0;
+}
+
+module_i2c_driver(pca9532_driver);
+
+MODULE_AUTHOR("Riku Voipio");
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("PCA 9532 LED dimmer");
diff --git a/kernel/drivers/leds/leds-pca955x.c b/kernel/drivers/leds/leds-pca955x.c
new file mode 100644
index 000000000..c3a08b605
--- /dev/null
+++ b/kernel/drivers/leds/leds-pca955x.c
@@ -0,0 +1,393 @@
+/*
+ * Copyright 2007-2008 Extreme Engineering Solutions, Inc.
+ *
+ * Author: Nate Case <ncase@xes-inc.com>
+ *
+ * This file is subject to the terms and conditions of version 2 of
+ * the GNU General Public License. See the file COPYING in the main
+ * directory of this archive for more details.
+ *
+ * LED driver for various PCA955x I2C LED drivers
+ *
+ * Supported devices:
+ *
+ * Device Description 7-bit slave address
+ * ------ ----------- -------------------
+ * PCA9550 2-bit driver 0x60 .. 0x61
+ * PCA9551 8-bit driver 0x60 .. 0x67
+ * PCA9552 16-bit driver 0x60 .. 0x67
+ * PCA9553/01 4-bit driver 0x62
+ * PCA9553/02 4-bit driver 0x63
+ *
+ * Philips PCA955x LED driver chips follow a register map as shown below:
+ *
+ * Control Register Description
+ * ---------------- -----------
+ * 0x0 Input register 0
+ * ..
+ * NUM_INPUT_REGS - 1 Last Input register X
+ *
+ * NUM_INPUT_REGS Frequency prescaler 0
+ * NUM_INPUT_REGS + 1 PWM register 0
+ * NUM_INPUT_REGS + 2 Frequency prescaler 1
+ * NUM_INPUT_REGS + 3 PWM register 1
+ *
+ * NUM_INPUT_REGS + 4 LED selector 0
+ * NUM_INPUT_REGS + 4
+ * + NUM_LED_REGS - 1 Last LED selector
+ *
+ * where NUM_INPUT_REGS and NUM_LED_REGS vary depending on how many
+ * bits the chip supports.
+ */
+
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/string.h>
+#include <linux/ctype.h>
+#include <linux/leds.h>
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include <linux/workqueue.h>
+#include <linux/slab.h>
+
+/* LED select registers determine the source that drives LED outputs */
+#define PCA955X_LS_LED_ON 0x0 /* Output LOW */
+#define PCA955X_LS_LED_OFF 0x1 /* Output HI-Z */
+#define PCA955X_LS_BLINK0 0x2 /* Blink at PWM0 rate */
+#define PCA955X_LS_BLINK1 0x3 /* Blink at PWM1 rate */
+
+enum pca955x_type {
+ pca9550,
+ pca9551,
+ pca9552,
+ pca9553,
+};
+
+struct pca955x_chipdef {
+ int bits;
+ u8 slv_addr; /* 7-bit slave address mask */
+ int slv_addr_shift; /* Number of bits to ignore */
+};
+
+static struct pca955x_chipdef pca955x_chipdefs[] = {
+ [pca9550] = {
+ .bits = 2,
+ .slv_addr = /* 110000x */ 0x60,
+ .slv_addr_shift = 1,
+ },
+ [pca9551] = {
+ .bits = 8,
+ .slv_addr = /* 1100xxx */ 0x60,
+ .slv_addr_shift = 3,
+ },
+ [pca9552] = {
+ .bits = 16,
+ .slv_addr = /* 1100xxx */ 0x60,
+ .slv_addr_shift = 3,
+ },
+ [pca9553] = {
+ .bits = 4,
+ .slv_addr = /* 110001x */ 0x62,
+ .slv_addr_shift = 1,
+ },
+};
+
+static const struct i2c_device_id pca955x_id[] = {
+ { "pca9550", pca9550 },
+ { "pca9551", pca9551 },
+ { "pca9552", pca9552 },
+ { "pca9553", pca9553 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, pca955x_id);
+
+struct pca955x {
+ struct mutex lock;
+ struct pca955x_led *leds;
+ struct pca955x_chipdef *chipdef;
+ struct i2c_client *client;
+};
+
+struct pca955x_led {
+ struct pca955x *pca955x;
+ struct work_struct work;
+ enum led_brightness brightness;
+ struct led_classdev led_cdev;
+ int led_num; /* 0 .. 15 potentially */
+ char name[32];
+};
+
+/* 8 bits per input register */
+static inline int pca95xx_num_input_regs(int bits)
+{
+ return (bits + 7) / 8;
+}
+
+/* 4 bits per LED selector register */
+static inline int pca95xx_num_led_regs(int bits)
+{
+ return (bits + 3) / 4;
+}
+
+/*
+ * Return an LED selector register value based on an existing one, with
+ * the appropriate 2-bit state value set for the given LED number (0-3).
+ */
+static inline u8 pca955x_ledsel(u8 oldval, int led_num, int state)
+{
+ return (oldval & (~(0x3 << (led_num << 1)))) |
+ ((state & 0x3) << (led_num << 1));
+}
+
+/*
+ * Write to frequency prescaler register, used to program the
+ * period of the PWM output. period = (PSCx + 1) / 38
+ */
+static void pca955x_write_psc(struct i2c_client *client, int n, u8 val)
+{
+ struct pca955x *pca955x = i2c_get_clientdata(client);
+
+ i2c_smbus_write_byte_data(client,
+ pca95xx_num_input_regs(pca955x->chipdef->bits) + 2*n,
+ val);
+}
+
+/*
+ * Write to PWM register, which determines the duty cycle of the
+ * output. LED is OFF when the count is less than the value of this
+ * register, and ON when it is greater. If PWMx == 0, LED is always OFF.
+ *
+ * Duty cycle is (256 - PWMx) / 256
+ */
+static void pca955x_write_pwm(struct i2c_client *client, int n, u8 val)
+{
+ struct pca955x *pca955x = i2c_get_clientdata(client);
+
+ i2c_smbus_write_byte_data(client,
+ pca95xx_num_input_regs(pca955x->chipdef->bits) + 1 + 2*n,
+ val);
+}
+
+/*
+ * Write to LED selector register, which determines the source that
+ * drives the LED output.
+ */
+static void pca955x_write_ls(struct i2c_client *client, int n, u8 val)
+{
+ struct pca955x *pca955x = i2c_get_clientdata(client);
+
+ i2c_smbus_write_byte_data(client,
+ pca95xx_num_input_regs(pca955x->chipdef->bits) + 4 + n,
+ val);
+}
+
+/*
+ * Read the LED selector register, which determines the source that
+ * drives the LED output.
+ */
+static u8 pca955x_read_ls(struct i2c_client *client, int n)
+{
+ struct pca955x *pca955x = i2c_get_clientdata(client);
+
+ return (u8) i2c_smbus_read_byte_data(client,
+ pca95xx_num_input_regs(pca955x->chipdef->bits) + 4 + n);
+}
+
+static void pca955x_led_work(struct work_struct *work)
+{
+ struct pca955x_led *pca955x_led;
+ struct pca955x *pca955x;
+ u8 ls;
+ int chip_ls; /* which LSx to use (0-3 potentially) */
+ int ls_led; /* which set of bits within LSx to use (0-3) */
+
+ pca955x_led = container_of(work, struct pca955x_led, work);
+ pca955x = pca955x_led->pca955x;
+
+ chip_ls = pca955x_led->led_num / 4;
+ ls_led = pca955x_led->led_num % 4;
+
+ mutex_lock(&pca955x->lock);
+
+ ls = pca955x_read_ls(pca955x->client, chip_ls);
+
+ switch (pca955x_led->brightness) {
+ case LED_FULL:
+ ls = pca955x_ledsel(ls, ls_led, PCA955X_LS_LED_ON);
+ break;
+ case LED_OFF:
+ ls = pca955x_ledsel(ls, ls_led, PCA955X_LS_LED_OFF);
+ break;
+ case LED_HALF:
+ ls = pca955x_ledsel(ls, ls_led, PCA955X_LS_BLINK0);
+ break;
+ default:
+ /*
+ * Use PWM1 for all other values. This has the unwanted
+ * side effect of making all LEDs on the chip share the
+ * same brightness level if set to a value other than
+ * OFF, HALF, or FULL. But, this is probably better than
+ * just turning off for all other values.
+ */
+ pca955x_write_pwm(pca955x->client, 1,
+ 255 - pca955x_led->brightness);
+ ls = pca955x_ledsel(ls, ls_led, PCA955X_LS_BLINK1);
+ break;
+ }
+
+ pca955x_write_ls(pca955x->client, chip_ls, ls);
+
+ mutex_unlock(&pca955x->lock);
+}
+
+static void pca955x_led_set(struct led_classdev *led_cdev, enum led_brightness value)
+{
+ struct pca955x_led *pca955x;
+
+ pca955x = container_of(led_cdev, struct pca955x_led, led_cdev);
+
+ pca955x->brightness = value;
+
+ /*
+ * Must use workqueue for the actual I/O since I2C operations
+ * can sleep.
+ */
+ schedule_work(&pca955x->work);
+}
+
+static int pca955x_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct pca955x *pca955x;
+ struct pca955x_led *pca955x_led;
+ struct pca955x_chipdef *chip;
+ struct i2c_adapter *adapter;
+ struct led_platform_data *pdata;
+ int i, err;
+
+ chip = &pca955x_chipdefs[id->driver_data];
+ adapter = to_i2c_adapter(client->dev.parent);
+ pdata = dev_get_platdata(&client->dev);
+
+ /* Make sure the slave address / chip type combo given is possible */
+ if ((client->addr & ~((1 << chip->slv_addr_shift) - 1)) !=
+ chip->slv_addr) {
+ dev_err(&client->dev, "invalid slave address %02x\n",
+ client->addr);
+ return -ENODEV;
+ }
+
+ dev_info(&client->dev, "leds-pca955x: Using %s %d-bit LED driver at "
+ "slave address 0x%02x\n",
+ id->name, chip->bits, client->addr);
+
+ if (!i2c_check_functionality(adapter, I2C_FUNC_I2C))
+ return -EIO;
+
+ if (pdata) {
+ if (pdata->num_leds != chip->bits) {
+ dev_err(&client->dev, "board info claims %d LEDs"
+ " on a %d-bit chip\n",
+ pdata->num_leds, chip->bits);
+ return -ENODEV;
+ }
+ }
+
+ pca955x = devm_kzalloc(&client->dev, sizeof(*pca955x), GFP_KERNEL);
+ if (!pca955x)
+ return -ENOMEM;
+
+ pca955x->leds = devm_kzalloc(&client->dev,
+ sizeof(*pca955x_led) * chip->bits, GFP_KERNEL);
+ if (!pca955x->leds)
+ return -ENOMEM;
+
+ i2c_set_clientdata(client, pca955x);
+
+ mutex_init(&pca955x->lock);
+ pca955x->client = client;
+ pca955x->chipdef = chip;
+
+ for (i = 0; i < chip->bits; i++) {
+ pca955x_led = &pca955x->leds[i];
+ pca955x_led->led_num = i;
+ pca955x_led->pca955x = pca955x;
+
+ /* Platform data can specify LED names and default triggers */
+ if (pdata) {
+ if (pdata->leds[i].name)
+ snprintf(pca955x_led->name,
+ sizeof(pca955x_led->name), "pca955x:%s",
+ pdata->leds[i].name);
+ if (pdata->leds[i].default_trigger)
+ pca955x_led->led_cdev.default_trigger =
+ pdata->leds[i].default_trigger;
+ } else {
+ snprintf(pca955x_led->name, sizeof(pca955x_led->name),
+ "pca955x:%d", i);
+ }
+
+ pca955x_led->led_cdev.name = pca955x_led->name;
+ pca955x_led->led_cdev.brightness_set = pca955x_led_set;
+
+ INIT_WORK(&pca955x_led->work, pca955x_led_work);
+
+ err = led_classdev_register(&client->dev,
+ &pca955x_led->led_cdev);
+ if (err < 0)
+ goto exit;
+ }
+
+ /* Turn off LEDs */
+ for (i = 0; i < pca95xx_num_led_regs(chip->bits); i++)
+ pca955x_write_ls(client, i, 0x55);
+
+ /* PWM0 is used for half brightness or 50% duty cycle */
+ pca955x_write_pwm(client, 0, 255-LED_HALF);
+
+ /* PWM1 is used for variable brightness, default to OFF */
+ pca955x_write_pwm(client, 1, 0);
+
+ /* Set to fast frequency so we do not see flashing */
+ pca955x_write_psc(client, 0, 0);
+ pca955x_write_psc(client, 1, 0);
+
+ return 0;
+
+exit:
+ while (i--) {
+ led_classdev_unregister(&pca955x->leds[i].led_cdev);
+ cancel_work_sync(&pca955x->leds[i].work);
+ }
+
+ return err;
+}
+
+static int pca955x_remove(struct i2c_client *client)
+{
+ struct pca955x *pca955x = i2c_get_clientdata(client);
+ int i;
+
+ for (i = 0; i < pca955x->chipdef->bits; i++) {
+ led_classdev_unregister(&pca955x->leds[i].led_cdev);
+ cancel_work_sync(&pca955x->leds[i].work);
+ }
+
+ return 0;
+}
+
+static struct i2c_driver pca955x_driver = {
+ .driver = {
+ .name = "leds-pca955x",
+ .owner = THIS_MODULE,
+ },
+ .probe = pca955x_probe,
+ .remove = pca955x_remove,
+ .id_table = pca955x_id,
+};
+
+module_i2c_driver(pca955x_driver);
+
+MODULE_AUTHOR("Nate Case <ncase@xes-inc.com>");
+MODULE_DESCRIPTION("PCA955x LED driver");
+MODULE_LICENSE("GPL v2");
diff --git a/kernel/drivers/leds/leds-pca963x.c b/kernel/drivers/leds/leds-pca963x.c
new file mode 100644
index 000000000..bee3e1ab2
--- /dev/null
+++ b/kernel/drivers/leds/leds-pca963x.c
@@ -0,0 +1,473 @@
+/*
+ * Copyright 2011 bct electronic GmbH
+ * Copyright 2013 Qtechnology/AS
+ *
+ * Author: Peter Meerwald <p.meerwald@bct-electronic.com>
+ * Author: Ricardo Ribalda <ricardo.ribalda@gmail.com>
+ *
+ * Based on leds-pca955x.c
+ *
+ * This file is subject to the terms and conditions of version 2 of
+ * the GNU General Public License. See the file COPYING in the main
+ * directory of this archive for more details.
+ *
+ * LED driver for the PCA9633 I2C LED driver (7-bit slave address 0x62)
+ * LED driver for the PCA9634/5 I2C LED driver (7-bit slave address set by hw.)
+ *
+ * Note that hardware blinking violates the leds infrastructure driver
+ * interface since the hardware only supports blinking all LEDs with the
+ * same delay_on/delay_off rates. That is, only the LEDs that are set to
+ * blink will actually blink but all LEDs that are set to blink will blink
+ * in identical fashion. The delay_on/delay_off values of the last LED
+ * that is set to blink will be used for all of the blinking LEDs.
+ * Hardware blinking is disabled by default but can be enabled by setting
+ * the 'blink_type' member in the platform_data struct to 'PCA963X_HW_BLINK'
+ * or by adding the 'nxp,hw-blink' property to the DTS.
+ */
+
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/string.h>
+#include <linux/ctype.h>
+#include <linux/leds.h>
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include <linux/workqueue.h>
+#include <linux/slab.h>
+#include <linux/of.h>
+#include <linux/platform_data/leds-pca963x.h>
+
+/* LED select registers determine the source that drives LED outputs */
+#define PCA963X_LED_OFF 0x0 /* LED driver off */
+#define PCA963X_LED_ON 0x1 /* LED driver on */
+#define PCA963X_LED_PWM 0x2 /* Controlled through PWM */
+#define PCA963X_LED_GRP_PWM 0x3 /* Controlled through PWM/GRPPWM */
+
+#define PCA963X_MODE2_DMBLNK 0x20 /* Enable blinking */
+
+#define PCA963X_MODE1 0x00
+#define PCA963X_MODE2 0x01
+#define PCA963X_PWM_BASE 0x02
+
+enum pca963x_type {
+ pca9633,
+ pca9634,
+ pca9635,
+};
+
+struct pca963x_chipdef {
+ u8 grppwm;
+ u8 grpfreq;
+ u8 ledout_base;
+ int n_leds;
+};
+
+static struct pca963x_chipdef pca963x_chipdefs[] = {
+ [pca9633] = {
+ .grppwm = 0x6,
+ .grpfreq = 0x7,
+ .ledout_base = 0x8,
+ .n_leds = 4,
+ },
+ [pca9634] = {
+ .grppwm = 0xa,
+ .grpfreq = 0xb,
+ .ledout_base = 0xc,
+ .n_leds = 8,
+ },
+ [pca9635] = {
+ .grppwm = 0x12,
+ .grpfreq = 0x13,
+ .ledout_base = 0x14,
+ .n_leds = 16,
+ },
+};
+
+/* Total blink period in milliseconds */
+#define PCA963X_BLINK_PERIOD_MIN 42
+#define PCA963X_BLINK_PERIOD_MAX 10667
+
+static const struct i2c_device_id pca963x_id[] = {
+ { "pca9632", pca9633 },
+ { "pca9633", pca9633 },
+ { "pca9634", pca9634 },
+ { "pca9635", pca9635 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, pca963x_id);
+
+enum pca963x_cmd {
+ BRIGHTNESS_SET,
+ BLINK_SET,
+};
+
+struct pca963x_led;
+
+struct pca963x {
+ struct pca963x_chipdef *chipdef;
+ struct mutex mutex;
+ struct i2c_client *client;
+ struct pca963x_led *leds;
+};
+
+struct pca963x_led {
+ struct pca963x *chip;
+ struct work_struct work;
+ enum led_brightness brightness;
+ struct led_classdev led_cdev;
+ int led_num; /* 0 .. 15 potentially */
+ enum pca963x_cmd cmd;
+ char name[32];
+ u8 gdc;
+ u8 gfrq;
+};
+
+static void pca963x_brightness_work(struct pca963x_led *pca963x)
+{
+ u8 ledout_addr = pca963x->chip->chipdef->ledout_base
+ + (pca963x->led_num / 4);
+ u8 ledout;
+ int shift = 2 * (pca963x->led_num % 4);
+ u8 mask = 0x3 << shift;
+
+ mutex_lock(&pca963x->chip->mutex);
+ ledout = i2c_smbus_read_byte_data(pca963x->chip->client, ledout_addr);
+ switch (pca963x->brightness) {
+ case LED_FULL:
+ i2c_smbus_write_byte_data(pca963x->chip->client, ledout_addr,
+ (ledout & ~mask) | (PCA963X_LED_ON << shift));
+ break;
+ case LED_OFF:
+ i2c_smbus_write_byte_data(pca963x->chip->client, ledout_addr,
+ ledout & ~mask);
+ break;
+ default:
+ i2c_smbus_write_byte_data(pca963x->chip->client,
+ PCA963X_PWM_BASE + pca963x->led_num,
+ pca963x->brightness);
+ i2c_smbus_write_byte_data(pca963x->chip->client, ledout_addr,
+ (ledout & ~mask) | (PCA963X_LED_PWM << shift));
+ break;
+ }
+ mutex_unlock(&pca963x->chip->mutex);
+}
+
+static void pca963x_blink_work(struct pca963x_led *pca963x)
+{
+ u8 ledout_addr = pca963x->chip->chipdef->ledout_base +
+ (pca963x->led_num / 4);
+ u8 ledout;
+ u8 mode2 = i2c_smbus_read_byte_data(pca963x->chip->client,
+ PCA963X_MODE2);
+ int shift = 2 * (pca963x->led_num % 4);
+ u8 mask = 0x3 << shift;
+
+ i2c_smbus_write_byte_data(pca963x->chip->client,
+ pca963x->chip->chipdef->grppwm, pca963x->gdc);
+
+ i2c_smbus_write_byte_data(pca963x->chip->client,
+ pca963x->chip->chipdef->grpfreq, pca963x->gfrq);
+
+ if (!(mode2 & PCA963X_MODE2_DMBLNK))
+ i2c_smbus_write_byte_data(pca963x->chip->client, PCA963X_MODE2,
+ mode2 | PCA963X_MODE2_DMBLNK);
+
+ mutex_lock(&pca963x->chip->mutex);
+ ledout = i2c_smbus_read_byte_data(pca963x->chip->client, ledout_addr);
+ if ((ledout & mask) != (PCA963X_LED_GRP_PWM << shift))
+ i2c_smbus_write_byte_data(pca963x->chip->client, ledout_addr,
+ (ledout & ~mask) | (PCA963X_LED_GRP_PWM << shift));
+ mutex_unlock(&pca963x->chip->mutex);
+}
+
+static void pca963x_work(struct work_struct *work)
+{
+ struct pca963x_led *pca963x = container_of(work,
+ struct pca963x_led, work);
+
+ switch (pca963x->cmd) {
+ case BRIGHTNESS_SET:
+ pca963x_brightness_work(pca963x);
+ break;
+ case BLINK_SET:
+ pca963x_blink_work(pca963x);
+ break;
+ }
+}
+
+static void pca963x_led_set(struct led_classdev *led_cdev,
+ enum led_brightness value)
+{
+ struct pca963x_led *pca963x;
+
+ pca963x = container_of(led_cdev, struct pca963x_led, led_cdev);
+
+ pca963x->cmd = BRIGHTNESS_SET;
+ pca963x->brightness = value;
+
+ /*
+ * Must use workqueue for the actual I/O since I2C operations
+ * can sleep.
+ */
+ schedule_work(&pca963x->work);
+}
+
+static int pca963x_blink_set(struct led_classdev *led_cdev,
+ unsigned long *delay_on, unsigned long *delay_off)
+{
+ struct pca963x_led *pca963x;
+ unsigned long time_on, time_off, period;
+ u8 gdc, gfrq;
+
+ pca963x = container_of(led_cdev, struct pca963x_led, led_cdev);
+
+ time_on = *delay_on;
+ time_off = *delay_off;
+
+ /* If both zero, pick reasonable defaults of 500ms each */
+ if (!time_on && !time_off) {
+ time_on = 500;
+ time_off = 500;
+ }
+
+ period = time_on + time_off;
+
+ /* If period not supported by hardware, default to someting sane. */
+ if ((period < PCA963X_BLINK_PERIOD_MIN) ||
+ (period > PCA963X_BLINK_PERIOD_MAX)) {
+ time_on = 500;
+ time_off = 500;
+ period = time_on + time_off;
+ }
+
+ /*
+ * From manual: duty cycle = (GDC / 256) ->
+ * (time_on / period) = (GDC / 256) ->
+ * GDC = ((time_on * 256) / period)
+ */
+ gdc = (time_on * 256) / period;
+
+ /*
+ * From manual: period = ((GFRQ + 1) / 24) in seconds.
+ * So, period (in ms) = (((GFRQ + 1) / 24) * 1000) ->
+ * GFRQ = ((period * 24 / 1000) - 1)
+ */
+ gfrq = (period * 24 / 1000) - 1;
+
+ pca963x->cmd = BLINK_SET;
+ pca963x->gdc = gdc;
+ pca963x->gfrq = gfrq;
+
+ /*
+ * Must use workqueue for the actual I/O since I2C operations
+ * can sleep.
+ */
+ schedule_work(&pca963x->work);
+
+ *delay_on = time_on;
+ *delay_off = time_off;
+
+ return 0;
+}
+
+#if IS_ENABLED(CONFIG_OF)
+static struct pca963x_platform_data *
+pca963x_dt_init(struct i2c_client *client, struct pca963x_chipdef *chip)
+{
+ struct device_node *np = client->dev.of_node, *child;
+ struct pca963x_platform_data *pdata;
+ struct led_info *pca963x_leds;
+ int count;
+
+ count = of_get_child_count(np);
+ if (!count || count > chip->n_leds)
+ return ERR_PTR(-ENODEV);
+
+ pca963x_leds = devm_kzalloc(&client->dev,
+ sizeof(struct led_info) * chip->n_leds, GFP_KERNEL);
+ if (!pca963x_leds)
+ return ERR_PTR(-ENOMEM);
+
+ for_each_child_of_node(np, child) {
+ struct led_info led = {};
+ u32 reg;
+ int res;
+
+ res = of_property_read_u32(child, "reg", &reg);
+ if ((res != 0) || (reg >= chip->n_leds))
+ continue;
+ led.name =
+ of_get_property(child, "label", NULL) ? : child->name;
+ led.default_trigger =
+ of_get_property(child, "linux,default-trigger", NULL);
+ pca963x_leds[reg] = led;
+ }
+ pdata = devm_kzalloc(&client->dev,
+ sizeof(struct pca963x_platform_data), GFP_KERNEL);
+ if (!pdata)
+ return ERR_PTR(-ENOMEM);
+
+ pdata->leds.leds = pca963x_leds;
+ pdata->leds.num_leds = chip->n_leds;
+
+ /* default to open-drain unless totem pole (push-pull) is specified */
+ if (of_property_read_bool(np, "nxp,totem-pole"))
+ pdata->outdrv = PCA963X_TOTEM_POLE;
+ else
+ pdata->outdrv = PCA963X_OPEN_DRAIN;
+
+ /* default to software blinking unless hardware blinking is specified */
+ if (of_property_read_bool(np, "nxp,hw-blink"))
+ pdata->blink_type = PCA963X_HW_BLINK;
+ else
+ pdata->blink_type = PCA963X_SW_BLINK;
+
+ return pdata;
+}
+
+static const struct of_device_id of_pca963x_match[] = {
+ { .compatible = "nxp,pca9632", },
+ { .compatible = "nxp,pca9633", },
+ { .compatible = "nxp,pca9634", },
+ { .compatible = "nxp,pca9635", },
+ {},
+};
+#else
+static struct pca963x_platform_data *
+pca963x_dt_init(struct i2c_client *client, struct pca963x_chipdef *chip)
+{
+ return ERR_PTR(-ENODEV);
+}
+#endif
+
+static int pca963x_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct pca963x *pca963x_chip;
+ struct pca963x_led *pca963x;
+ struct pca963x_platform_data *pdata;
+ struct pca963x_chipdef *chip;
+ int i, err;
+
+ chip = &pca963x_chipdefs[id->driver_data];
+ pdata = dev_get_platdata(&client->dev);
+
+ if (!pdata) {
+ pdata = pca963x_dt_init(client, chip);
+ if (IS_ERR(pdata)) {
+ dev_warn(&client->dev, "could not parse configuration\n");
+ pdata = NULL;
+ }
+ }
+
+ if (pdata && (pdata->leds.num_leds < 1 ||
+ pdata->leds.num_leds > chip->n_leds)) {
+ dev_err(&client->dev, "board info must claim 1-%d LEDs",
+ chip->n_leds);
+ return -EINVAL;
+ }
+
+ pca963x_chip = devm_kzalloc(&client->dev, sizeof(*pca963x_chip),
+ GFP_KERNEL);
+ if (!pca963x_chip)
+ return -ENOMEM;
+ pca963x = devm_kzalloc(&client->dev, chip->n_leds * sizeof(*pca963x),
+ GFP_KERNEL);
+ if (!pca963x)
+ return -ENOMEM;
+
+ i2c_set_clientdata(client, pca963x_chip);
+
+ mutex_init(&pca963x_chip->mutex);
+ pca963x_chip->chipdef = chip;
+ pca963x_chip->client = client;
+ pca963x_chip->leds = pca963x;
+
+ /* Turn off LEDs by default*/
+ for (i = 0; i < chip->n_leds / 4; i++)
+ i2c_smbus_write_byte_data(client, chip->ledout_base + i, 0x00);
+
+ for (i = 0; i < chip->n_leds; i++) {
+ pca963x[i].led_num = i;
+ pca963x[i].chip = pca963x_chip;
+
+ /* Platform data can specify LED names and default triggers */
+ if (pdata && i < pdata->leds.num_leds) {
+ if (pdata->leds.leds[i].name)
+ snprintf(pca963x[i].name,
+ sizeof(pca963x[i].name), "pca963x:%s",
+ pdata->leds.leds[i].name);
+ if (pdata->leds.leds[i].default_trigger)
+ pca963x[i].led_cdev.default_trigger =
+ pdata->leds.leds[i].default_trigger;
+ }
+ if (!pdata || i >= pdata->leds.num_leds ||
+ !pdata->leds.leds[i].name)
+ snprintf(pca963x[i].name, sizeof(pca963x[i].name),
+ "pca963x:%d:%.2x:%d", client->adapter->nr,
+ client->addr, i);
+
+ pca963x[i].led_cdev.name = pca963x[i].name;
+ pca963x[i].led_cdev.brightness_set = pca963x_led_set;
+
+ if (pdata && pdata->blink_type == PCA963X_HW_BLINK)
+ pca963x[i].led_cdev.blink_set = pca963x_blink_set;
+
+ INIT_WORK(&pca963x[i].work, pca963x_work);
+
+ err = led_classdev_register(&client->dev, &pca963x[i].led_cdev);
+ if (err < 0)
+ goto exit;
+ }
+
+ /* Disable LED all-call address and set normal mode */
+ i2c_smbus_write_byte_data(client, PCA963X_MODE1, 0x00);
+
+ if (pdata) {
+ /* Configure output: open-drain or totem pole (push-pull) */
+ if (pdata->outdrv == PCA963X_OPEN_DRAIN)
+ i2c_smbus_write_byte_data(client, PCA963X_MODE2, 0x01);
+ else
+ i2c_smbus_write_byte_data(client, PCA963X_MODE2, 0x05);
+ }
+
+ return 0;
+
+exit:
+ while (i--) {
+ led_classdev_unregister(&pca963x[i].led_cdev);
+ cancel_work_sync(&pca963x[i].work);
+ }
+
+ return err;
+}
+
+static int pca963x_remove(struct i2c_client *client)
+{
+ struct pca963x *pca963x = i2c_get_clientdata(client);
+ int i;
+
+ for (i = 0; i < pca963x->chipdef->n_leds; i++) {
+ led_classdev_unregister(&pca963x->leds[i].led_cdev);
+ cancel_work_sync(&pca963x->leds[i].work);
+ }
+
+ return 0;
+}
+
+static struct i2c_driver pca963x_driver = {
+ .driver = {
+ .name = "leds-pca963x",
+ .owner = THIS_MODULE,
+ .of_match_table = of_match_ptr(of_pca963x_match),
+ },
+ .probe = pca963x_probe,
+ .remove = pca963x_remove,
+ .id_table = pca963x_id,
+};
+
+module_i2c_driver(pca963x_driver);
+
+MODULE_AUTHOR("Peter Meerwald <p.meerwald@bct-electronic.com>");
+MODULE_DESCRIPTION("PCA963X LED driver");
+MODULE_LICENSE("GPL v2");
diff --git a/kernel/drivers/leds/leds-pm8941-wled.c b/kernel/drivers/leds/leds-pm8941-wled.c
new file mode 100644
index 000000000..bf64a593f
--- /dev/null
+++ b/kernel/drivers/leds/leds-pm8941-wled.c
@@ -0,0 +1,435 @@
+/* Copyright (c) 2015, Sony Mobile Communications, AB.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/leds.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/regmap.h>
+
+#define PM8941_WLED_REG_VAL_BASE 0x40
+#define PM8941_WLED_REG_VAL_MAX 0xFFF
+
+#define PM8941_WLED_REG_MOD_EN 0x46
+#define PM8941_WLED_REG_MOD_EN_BIT BIT(7)
+#define PM8941_WLED_REG_MOD_EN_MASK BIT(7)
+
+#define PM8941_WLED_REG_SYNC 0x47
+#define PM8941_WLED_REG_SYNC_MASK 0x07
+#define PM8941_WLED_REG_SYNC_LED1 BIT(0)
+#define PM8941_WLED_REG_SYNC_LED2 BIT(1)
+#define PM8941_WLED_REG_SYNC_LED3 BIT(2)
+#define PM8941_WLED_REG_SYNC_ALL 0x07
+#define PM8941_WLED_REG_SYNC_CLEAR 0x00
+
+#define PM8941_WLED_REG_FREQ 0x4c
+#define PM8941_WLED_REG_FREQ_MASK 0x0f
+
+#define PM8941_WLED_REG_OVP 0x4d
+#define PM8941_WLED_REG_OVP_MASK 0x03
+
+#define PM8941_WLED_REG_BOOST 0x4e
+#define PM8941_WLED_REG_BOOST_MASK 0x07
+
+#define PM8941_WLED_REG_SINK 0x4f
+#define PM8941_WLED_REG_SINK_MASK 0xe0
+#define PM8941_WLED_REG_SINK_SHFT 0x05
+
+/* Per-'string' registers below */
+#define PM8941_WLED_REG_STR_OFFSET 0x10
+
+#define PM8941_WLED_REG_STR_MOD_EN_BASE 0x60
+#define PM8941_WLED_REG_STR_MOD_MASK BIT(7)
+#define PM8941_WLED_REG_STR_MOD_EN BIT(7)
+
+#define PM8941_WLED_REG_STR_SCALE_BASE 0x62
+#define PM8941_WLED_REG_STR_SCALE_MASK 0x1f
+
+#define PM8941_WLED_REG_STR_MOD_SRC_BASE 0x63
+#define PM8941_WLED_REG_STR_MOD_SRC_MASK 0x01
+#define PM8941_WLED_REG_STR_MOD_SRC_INT 0x00
+#define PM8941_WLED_REG_STR_MOD_SRC_EXT 0x01
+
+#define PM8941_WLED_REG_STR_CABC_BASE 0x66
+#define PM8941_WLED_REG_STR_CABC_MASK BIT(7)
+#define PM8941_WLED_REG_STR_CABC_EN BIT(7)
+
+struct pm8941_wled_config {
+ u32 i_boost_limit;
+ u32 ovp;
+ u32 switch_freq;
+ u32 num_strings;
+ u32 i_limit;
+ bool cs_out_en;
+ bool ext_gen;
+ bool cabc_en;
+};
+
+struct pm8941_wled {
+ struct regmap *regmap;
+ u16 addr;
+
+ struct led_classdev cdev;
+
+ struct pm8941_wled_config cfg;
+};
+
+static int pm8941_wled_set(struct led_classdev *cdev,
+ enum led_brightness value)
+{
+ struct pm8941_wled *wled;
+ u8 ctrl = 0;
+ u16 val;
+ int rc;
+ int i;
+
+ wled = container_of(cdev, struct pm8941_wled, cdev);
+
+ if (value != 0)
+ ctrl = PM8941_WLED_REG_MOD_EN_BIT;
+
+ val = value * PM8941_WLED_REG_VAL_MAX / LED_FULL;
+
+ rc = regmap_update_bits(wled->regmap,
+ wled->addr + PM8941_WLED_REG_MOD_EN,
+ PM8941_WLED_REG_MOD_EN_MASK, ctrl);
+ if (rc)
+ return rc;
+
+ for (i = 0; i < wled->cfg.num_strings; ++i) {
+ u8 v[2] = { val & 0xff, (val >> 8) & 0xf };
+
+ rc = regmap_bulk_write(wled->regmap,
+ wled->addr + PM8941_WLED_REG_VAL_BASE + 2 * i,
+ v, 2);
+ if (rc)
+ return rc;
+ }
+
+ rc = regmap_update_bits(wled->regmap,
+ wled->addr + PM8941_WLED_REG_SYNC,
+ PM8941_WLED_REG_SYNC_MASK, PM8941_WLED_REG_SYNC_ALL);
+ if (rc)
+ return rc;
+
+ rc = regmap_update_bits(wled->regmap,
+ wled->addr + PM8941_WLED_REG_SYNC,
+ PM8941_WLED_REG_SYNC_MASK, PM8941_WLED_REG_SYNC_CLEAR);
+ return rc;
+}
+
+static void pm8941_wled_set_brightness(struct led_classdev *cdev,
+ enum led_brightness value)
+{
+ if (pm8941_wled_set(cdev, value)) {
+ dev_err(cdev->dev, "Unable to set brightness\n");
+ return;
+ }
+ cdev->brightness = value;
+}
+
+static int pm8941_wled_setup(struct pm8941_wled *wled)
+{
+ int rc;
+ int i;
+
+ rc = regmap_update_bits(wled->regmap,
+ wled->addr + PM8941_WLED_REG_OVP,
+ PM8941_WLED_REG_OVP_MASK, wled->cfg.ovp);
+ if (rc)
+ return rc;
+
+ rc = regmap_update_bits(wled->regmap,
+ wled->addr + PM8941_WLED_REG_BOOST,
+ PM8941_WLED_REG_BOOST_MASK, wled->cfg.i_boost_limit);
+ if (rc)
+ return rc;
+
+ rc = regmap_update_bits(wled->regmap,
+ wled->addr + PM8941_WLED_REG_FREQ,
+ PM8941_WLED_REG_FREQ_MASK, wled->cfg.switch_freq);
+ if (rc)
+ return rc;
+
+ if (wled->cfg.cs_out_en) {
+ u8 all = (BIT(wled->cfg.num_strings) - 1)
+ << PM8941_WLED_REG_SINK_SHFT;
+
+ rc = regmap_update_bits(wled->regmap,
+ wled->addr + PM8941_WLED_REG_SINK,
+ PM8941_WLED_REG_SINK_MASK, all);
+ if (rc)
+ return rc;
+ }
+
+ for (i = 0; i < wled->cfg.num_strings; ++i) {
+ u16 addr = wled->addr + PM8941_WLED_REG_STR_OFFSET * i;
+
+ rc = regmap_update_bits(wled->regmap,
+ addr + PM8941_WLED_REG_STR_MOD_EN_BASE,
+ PM8941_WLED_REG_STR_MOD_MASK,
+ PM8941_WLED_REG_STR_MOD_EN);
+ if (rc)
+ return rc;
+
+ if (wled->cfg.ext_gen) {
+ rc = regmap_update_bits(wled->regmap,
+ addr + PM8941_WLED_REG_STR_MOD_SRC_BASE,
+ PM8941_WLED_REG_STR_MOD_SRC_MASK,
+ PM8941_WLED_REG_STR_MOD_SRC_EXT);
+ if (rc)
+ return rc;
+ }
+
+ rc = regmap_update_bits(wled->regmap,
+ addr + PM8941_WLED_REG_STR_SCALE_BASE,
+ PM8941_WLED_REG_STR_SCALE_MASK,
+ wled->cfg.i_limit);
+ if (rc)
+ return rc;
+
+ rc = regmap_update_bits(wled->regmap,
+ addr + PM8941_WLED_REG_STR_CABC_BASE,
+ PM8941_WLED_REG_STR_CABC_MASK,
+ wled->cfg.cabc_en ?
+ PM8941_WLED_REG_STR_CABC_EN : 0);
+ if (rc)
+ return rc;
+ }
+
+ return 0;
+}
+
+static const struct pm8941_wled_config pm8941_wled_config_defaults = {
+ .i_boost_limit = 3,
+ .i_limit = 20,
+ .ovp = 2,
+ .switch_freq = 5,
+ .num_strings = 0,
+ .cs_out_en = false,
+ .ext_gen = false,
+ .cabc_en = false,
+};
+
+struct pm8941_wled_var_cfg {
+ const u32 *values;
+ u32 (*fn)(u32);
+ int size;
+};
+
+static const u32 pm8941_wled_i_boost_limit_values[] = {
+ 105, 385, 525, 805, 980, 1260, 1400, 1680,
+};
+
+static const struct pm8941_wled_var_cfg pm8941_wled_i_boost_limit_cfg = {
+ .values = pm8941_wled_i_boost_limit_values,
+ .size = ARRAY_SIZE(pm8941_wled_i_boost_limit_values),
+};
+
+static const u32 pm8941_wled_ovp_values[] = {
+ 35, 32, 29, 27,
+};
+
+static const struct pm8941_wled_var_cfg pm8941_wled_ovp_cfg = {
+ .values = pm8941_wled_ovp_values,
+ .size = ARRAY_SIZE(pm8941_wled_ovp_values),
+};
+
+static u32 pm8941_wled_num_strings_values_fn(u32 idx)
+{
+ return idx + 1;
+}
+
+static const struct pm8941_wled_var_cfg pm8941_wled_num_strings_cfg = {
+ .fn = pm8941_wled_num_strings_values_fn,
+ .size = 3,
+};
+
+static u32 pm8941_wled_switch_freq_values_fn(u32 idx)
+{
+ return 19200 / (2 * (1 + idx));
+}
+
+static const struct pm8941_wled_var_cfg pm8941_wled_switch_freq_cfg = {
+ .fn = pm8941_wled_switch_freq_values_fn,
+ .size = 16,
+};
+
+static const struct pm8941_wled_var_cfg pm8941_wled_i_limit_cfg = {
+ .size = 26,
+};
+
+static u32 pm8941_wled_values(const struct pm8941_wled_var_cfg *cfg, u32 idx)
+{
+ if (idx >= cfg->size)
+ return UINT_MAX;
+ if (cfg->fn)
+ return cfg->fn(idx);
+ if (cfg->values)
+ return cfg->values[idx];
+ return idx;
+}
+
+static int pm8941_wled_configure(struct pm8941_wled *wled, struct device *dev)
+{
+ struct pm8941_wled_config *cfg = &wled->cfg;
+ u32 val;
+ int rc;
+ u32 c;
+ int i;
+ int j;
+
+ const struct {
+ const char *name;
+ u32 *val_ptr;
+ const struct pm8941_wled_var_cfg *cfg;
+ } u32_opts[] = {
+ {
+ "qcom,current-boost-limit",
+ &cfg->i_boost_limit,
+ .cfg = &pm8941_wled_i_boost_limit_cfg,
+ },
+ {
+ "qcom,current-limit",
+ &cfg->i_limit,
+ .cfg = &pm8941_wled_i_limit_cfg,
+ },
+ {
+ "qcom,ovp",
+ &cfg->ovp,
+ .cfg = &pm8941_wled_ovp_cfg,
+ },
+ {
+ "qcom,switching-freq",
+ &cfg->switch_freq,
+ .cfg = &pm8941_wled_switch_freq_cfg,
+ },
+ {
+ "qcom,num-strings",
+ &cfg->num_strings,
+ .cfg = &pm8941_wled_num_strings_cfg,
+ },
+ };
+ const struct {
+ const char *name;
+ bool *val_ptr;
+ } bool_opts[] = {
+ { "qcom,cs-out", &cfg->cs_out_en, },
+ { "qcom,ext-gen", &cfg->ext_gen, },
+ { "qcom,cabc", &cfg->cabc_en, },
+ };
+
+ rc = of_property_read_u32(dev->of_node, "reg", &val);
+ if (rc || val > 0xffff) {
+ dev_err(dev, "invalid IO resources\n");
+ return rc ? rc : -EINVAL;
+ }
+ wled->addr = val;
+
+ rc = of_property_read_string(dev->of_node, "label", &wled->cdev.name);
+ if (rc)
+ wled->cdev.name = dev->of_node->name;
+
+ wled->cdev.default_trigger = of_get_property(dev->of_node,
+ "linux,default-trigger", NULL);
+
+ *cfg = pm8941_wled_config_defaults;
+ for (i = 0; i < ARRAY_SIZE(u32_opts); ++i) {
+ rc = of_property_read_u32(dev->of_node, u32_opts[i].name, &val);
+ if (rc == -EINVAL) {
+ continue;
+ } else if (rc) {
+ dev_err(dev, "error reading '%s'\n", u32_opts[i].name);
+ return rc;
+ }
+
+ c = UINT_MAX;
+ for (j = 0; c != val; j++) {
+ c = pm8941_wled_values(u32_opts[i].cfg, j);
+ if (c == UINT_MAX) {
+ dev_err(dev, "invalid value for '%s'\n",
+ u32_opts[i].name);
+ return -EINVAL;
+ }
+ }
+
+ dev_dbg(dev, "'%s' = %u\n", u32_opts[i].name, c);
+ *u32_opts[i].val_ptr = j;
+ }
+
+ for (i = 0; i < ARRAY_SIZE(bool_opts); ++i) {
+ if (of_property_read_bool(dev->of_node, bool_opts[i].name))
+ *bool_opts[i].val_ptr = true;
+ }
+
+ cfg->num_strings = cfg->num_strings + 1;
+
+ return 0;
+}
+
+static int pm8941_wled_probe(struct platform_device *pdev)
+{
+ struct pm8941_wled *wled;
+ struct regmap *regmap;
+ int rc;
+
+ regmap = dev_get_regmap(pdev->dev.parent, NULL);
+ if (!regmap) {
+ dev_err(&pdev->dev, "Unable to get regmap\n");
+ return -EINVAL;
+ }
+
+ wled = devm_kzalloc(&pdev->dev, sizeof(*wled), GFP_KERNEL);
+ if (!wled)
+ return -ENOMEM;
+
+ wled->regmap = regmap;
+
+ rc = pm8941_wled_configure(wled, &pdev->dev);
+ if (rc)
+ return rc;
+
+ rc = pm8941_wled_setup(wled);
+ if (rc)
+ return rc;
+
+ wled->cdev.brightness_set = pm8941_wled_set_brightness;
+
+ rc = devm_led_classdev_register(&pdev->dev, &wled->cdev);
+ if (rc)
+ return rc;
+
+ platform_set_drvdata(pdev, wled);
+
+ return 0;
+};
+
+static const struct of_device_id pm8941_wled_match_table[] = {
+ { .compatible = "qcom,pm8941-wled" },
+ {}
+};
+MODULE_DEVICE_TABLE(of, pm8941_wled_match_table);
+
+static struct platform_driver pm8941_wled_driver = {
+ .probe = pm8941_wled_probe,
+ .driver = {
+ .name = "pm8941-wled",
+ .of_match_table = pm8941_wled_match_table,
+ },
+};
+
+module_platform_driver(pm8941_wled_driver);
+
+MODULE_DESCRIPTION("pm8941 wled driver");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:pm8941-wled");
diff --git a/kernel/drivers/leds/leds-pwm.c b/kernel/drivers/leds/leds-pwm.c
new file mode 100644
index 000000000..1d07e3e83
--- /dev/null
+++ b/kernel/drivers/leds/leds-pwm.c
@@ -0,0 +1,241 @@
+/*
+ * linux/drivers/leds-pwm.c
+ *
+ * simple PWM based LED control
+ *
+ * Copyright 2009 Luotao Fu @ Pengutronix (l.fu@pengutronix.de)
+ *
+ * based on leds-gpio.c by Raphael Assenat <raph@8d.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/of_platform.h>
+#include <linux/fb.h>
+#include <linux/leds.h>
+#include <linux/err.h>
+#include <linux/pwm.h>
+#include <linux/leds_pwm.h>
+#include <linux/slab.h>
+#include <linux/workqueue.h>
+
+struct led_pwm_data {
+ struct led_classdev cdev;
+ struct pwm_device *pwm;
+ struct work_struct work;
+ unsigned int active_low;
+ unsigned int period;
+ int duty;
+ bool can_sleep;
+};
+
+struct led_pwm_priv {
+ int num_leds;
+ struct led_pwm_data leds[0];
+};
+
+static void __led_pwm_set(struct led_pwm_data *led_dat)
+{
+ int new_duty = led_dat->duty;
+
+ pwm_config(led_dat->pwm, new_duty, led_dat->period);
+
+ if (new_duty == 0)
+ pwm_disable(led_dat->pwm);
+ else
+ pwm_enable(led_dat->pwm);
+}
+
+static void led_pwm_work(struct work_struct *work)
+{
+ struct led_pwm_data *led_dat =
+ container_of(work, struct led_pwm_data, work);
+
+ __led_pwm_set(led_dat);
+}
+
+static void led_pwm_set(struct led_classdev *led_cdev,
+ enum led_brightness brightness)
+{
+ struct led_pwm_data *led_dat =
+ container_of(led_cdev, struct led_pwm_data, cdev);
+ unsigned int max = led_dat->cdev.max_brightness;
+ unsigned long long duty = led_dat->period;
+
+ duty *= brightness;
+ do_div(duty, max);
+
+ if (led_dat->active_low)
+ duty = led_dat->period - duty;
+
+ led_dat->duty = duty;
+
+ if (led_dat->can_sleep)
+ schedule_work(&led_dat->work);
+ else
+ __led_pwm_set(led_dat);
+}
+
+static inline size_t sizeof_pwm_leds_priv(int num_leds)
+{
+ return sizeof(struct led_pwm_priv) +
+ (sizeof(struct led_pwm_data) * num_leds);
+}
+
+static void led_pwm_cleanup(struct led_pwm_priv *priv)
+{
+ while (priv->num_leds--) {
+ led_classdev_unregister(&priv->leds[priv->num_leds].cdev);
+ if (priv->leds[priv->num_leds].can_sleep)
+ cancel_work_sync(&priv->leds[priv->num_leds].work);
+ }
+}
+
+static int led_pwm_add(struct device *dev, struct led_pwm_priv *priv,
+ struct led_pwm *led, struct device_node *child)
+{
+ struct led_pwm_data *led_data = &priv->leds[priv->num_leds];
+ int ret;
+
+ led_data->active_low = led->active_low;
+ led_data->cdev.name = led->name;
+ led_data->cdev.default_trigger = led->default_trigger;
+ led_data->cdev.brightness_set = led_pwm_set;
+ led_data->cdev.brightness = LED_OFF;
+ led_data->cdev.max_brightness = led->max_brightness;
+ led_data->cdev.flags = LED_CORE_SUSPENDRESUME;
+
+ if (child)
+ led_data->pwm = devm_of_pwm_get(dev, child, NULL);
+ else
+ led_data->pwm = devm_pwm_get(dev, led->name);
+ if (IS_ERR(led_data->pwm)) {
+ ret = PTR_ERR(led_data->pwm);
+ dev_err(dev, "unable to request PWM for %s: %d\n",
+ led->name, ret);
+ return ret;
+ }
+
+ led_data->can_sleep = pwm_can_sleep(led_data->pwm);
+ if (led_data->can_sleep)
+ INIT_WORK(&led_data->work, led_pwm_work);
+
+ led_data->period = pwm_get_period(led_data->pwm);
+ if (!led_data->period && (led->pwm_period_ns > 0))
+ led_data->period = led->pwm_period_ns;
+
+ ret = led_classdev_register(dev, &led_data->cdev);
+ if (ret == 0) {
+ priv->num_leds++;
+ } else {
+ dev_err(dev, "failed to register PWM led for %s: %d\n",
+ led->name, ret);
+ }
+
+ return ret;
+}
+
+static int led_pwm_create_of(struct device *dev, struct led_pwm_priv *priv)
+{
+ struct device_node *child;
+ struct led_pwm led;
+ int ret = 0;
+
+ memset(&led, 0, sizeof(led));
+
+ for_each_child_of_node(dev->of_node, child) {
+ led.name = of_get_property(child, "label", NULL) ? :
+ child->name;
+
+ led.default_trigger = of_get_property(child,
+ "linux,default-trigger", NULL);
+ led.active_low = of_property_read_bool(child, "active-low");
+ of_property_read_u32(child, "max-brightness",
+ &led.max_brightness);
+
+ ret = led_pwm_add(dev, priv, &led, child);
+ if (ret) {
+ of_node_put(child);
+ break;
+ }
+ }
+
+ return ret;
+}
+
+static int led_pwm_probe(struct platform_device *pdev)
+{
+ struct led_pwm_platform_data *pdata = dev_get_platdata(&pdev->dev);
+ struct led_pwm_priv *priv;
+ int count, i;
+ int ret = 0;
+
+ if (pdata)
+ count = pdata->num_leds;
+ else
+ count = of_get_child_count(pdev->dev.of_node);
+
+ if (!count)
+ return -EINVAL;
+
+ priv = devm_kzalloc(&pdev->dev, sizeof_pwm_leds_priv(count),
+ GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ if (pdata) {
+ for (i = 0; i < count; i++) {
+ ret = led_pwm_add(&pdev->dev, priv, &pdata->leds[i],
+ NULL);
+ if (ret)
+ break;
+ }
+ } else {
+ ret = led_pwm_create_of(&pdev->dev, priv);
+ }
+
+ if (ret) {
+ led_pwm_cleanup(priv);
+ return ret;
+ }
+
+ platform_set_drvdata(pdev, priv);
+
+ return 0;
+}
+
+static int led_pwm_remove(struct platform_device *pdev)
+{
+ struct led_pwm_priv *priv = platform_get_drvdata(pdev);
+
+ led_pwm_cleanup(priv);
+
+ return 0;
+}
+
+static const struct of_device_id of_pwm_leds_match[] = {
+ { .compatible = "pwm-leds", },
+ {},
+};
+MODULE_DEVICE_TABLE(of, of_pwm_leds_match);
+
+static struct platform_driver led_pwm_driver = {
+ .probe = led_pwm_probe,
+ .remove = led_pwm_remove,
+ .driver = {
+ .name = "leds_pwm",
+ .of_match_table = of_pwm_leds_match,
+ },
+};
+
+module_platform_driver(led_pwm_driver);
+
+MODULE_AUTHOR("Luotao Fu <l.fu@pengutronix.de>");
+MODULE_DESCRIPTION("PWM LED driver for PXA");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:leds-pwm");
diff --git a/kernel/drivers/leds/leds-rb532.c b/kernel/drivers/leds/leds-rb532.c
new file mode 100644
index 000000000..fcd1215b6
--- /dev/null
+++ b/kernel/drivers/leds/leds-rb532.c
@@ -0,0 +1,64 @@
+/*
+ * LEDs driver for the "User LED" on Routerboard532
+ *
+ * Copyright (C) 2009 Phil Sutter <n0-1@freewrt.org>
+ *
+ * Based on leds-cobalt-qube.c by Florian Fainelly and
+ * rb-diag.c (my own standalone driver for both LED and
+ * button of Routerboard532).
+ */
+
+#include <linux/leds.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach-rc32434/gpio.h>
+#include <asm/mach-rc32434/rb.h>
+
+static void rb532_led_set(struct led_classdev *cdev,
+ enum led_brightness brightness)
+{
+ if (brightness)
+ set_latch_u5(LO_ULED, 0);
+
+ else
+ set_latch_u5(0, LO_ULED);
+}
+
+static enum led_brightness rb532_led_get(struct led_classdev *cdev)
+{
+ return (get_latch_u5() & LO_ULED) ? LED_FULL : LED_OFF;
+}
+
+static struct led_classdev rb532_uled = {
+ .name = "uled",
+ .brightness_set = rb532_led_set,
+ .brightness_get = rb532_led_get,
+ .default_trigger = "nand-disk",
+};
+
+static int rb532_led_probe(struct platform_device *pdev)
+{
+ return led_classdev_register(&pdev->dev, &rb532_uled);
+}
+
+static int rb532_led_remove(struct platform_device *pdev)
+{
+ led_classdev_unregister(&rb532_uled);
+ return 0;
+}
+
+static struct platform_driver rb532_led_driver = {
+ .probe = rb532_led_probe,
+ .remove = rb532_led_remove,
+ .driver = {
+ .name = "rb532-led",
+ },
+};
+
+module_platform_driver(rb532_led_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("User LED support for Routerboard532");
+MODULE_AUTHOR("Phil Sutter <n0-1@freewrt.org>");
+MODULE_ALIAS("platform:rb532-led");
diff --git a/kernel/drivers/leds/leds-regulator.c b/kernel/drivers/leds/leds-regulator.c
new file mode 100644
index 000000000..ffc21397a
--- /dev/null
+++ b/kernel/drivers/leds/leds-regulator.c
@@ -0,0 +1,226 @@
+/*
+ * leds-regulator.c - LED class driver for regulator driven LEDs.
+ *
+ * Copyright (C) 2009 Antonio Ospite <ospite@studenti.unina.it>
+ *
+ * Inspired by leds-wm8350 driver.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/err.h>
+#include <linux/slab.h>
+#include <linux/workqueue.h>
+#include <linux/leds.h>
+#include <linux/leds-regulator.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/consumer.h>
+
+#define to_regulator_led(led_cdev) \
+ container_of(led_cdev, struct regulator_led, cdev)
+
+struct regulator_led {
+ struct led_classdev cdev;
+ enum led_brightness value;
+ int enabled;
+ struct mutex mutex;
+ struct work_struct work;
+
+ struct regulator *vcc;
+};
+
+static inline int led_regulator_get_max_brightness(struct regulator *supply)
+{
+ int ret;
+ int voltage = regulator_list_voltage(supply, 0);
+
+ if (voltage <= 0)
+ return 1;
+
+ /* even if regulator can't change voltages,
+ * we still assume it can change status
+ * and the LED can be turned on and off.
+ */
+ ret = regulator_set_voltage(supply, voltage, voltage);
+ if (ret < 0)
+ return 1;
+
+ return regulator_count_voltages(supply);
+}
+
+static int led_regulator_get_voltage(struct regulator *supply,
+ enum led_brightness brightness)
+{
+ if (brightness == 0)
+ return -EINVAL;
+
+ return regulator_list_voltage(supply, brightness - 1);
+}
+
+
+static void regulator_led_enable(struct regulator_led *led)
+{
+ int ret;
+
+ if (led->enabled)
+ return;
+
+ ret = regulator_enable(led->vcc);
+ if (ret != 0) {
+ dev_err(led->cdev.dev, "Failed to enable vcc: %d\n", ret);
+ return;
+ }
+
+ led->enabled = 1;
+}
+
+static void regulator_led_disable(struct regulator_led *led)
+{
+ int ret;
+
+ if (!led->enabled)
+ return;
+
+ ret = regulator_disable(led->vcc);
+ if (ret != 0) {
+ dev_err(led->cdev.dev, "Failed to disable vcc: %d\n", ret);
+ return;
+ }
+
+ led->enabled = 0;
+}
+
+static void regulator_led_set_value(struct regulator_led *led)
+{
+ int voltage;
+ int ret;
+
+ mutex_lock(&led->mutex);
+
+ if (led->value == LED_OFF) {
+ regulator_led_disable(led);
+ goto out;
+ }
+
+ if (led->cdev.max_brightness > 1) {
+ voltage = led_regulator_get_voltage(led->vcc, led->value);
+ dev_dbg(led->cdev.dev, "brightness: %d voltage: %d\n",
+ led->value, voltage);
+
+ ret = regulator_set_voltage(led->vcc, voltage, voltage);
+ if (ret != 0)
+ dev_err(led->cdev.dev, "Failed to set voltage %d: %d\n",
+ voltage, ret);
+ }
+
+ regulator_led_enable(led);
+
+out:
+ mutex_unlock(&led->mutex);
+}
+
+static void led_work(struct work_struct *work)
+{
+ struct regulator_led *led;
+
+ led = container_of(work, struct regulator_led, work);
+ regulator_led_set_value(led);
+}
+
+static void regulator_led_brightness_set(struct led_classdev *led_cdev,
+ enum led_brightness value)
+{
+ struct regulator_led *led = to_regulator_led(led_cdev);
+
+ led->value = value;
+ schedule_work(&led->work);
+}
+
+static int regulator_led_probe(struct platform_device *pdev)
+{
+ struct led_regulator_platform_data *pdata =
+ dev_get_platdata(&pdev->dev);
+ struct regulator_led *led;
+ struct regulator *vcc;
+ int ret = 0;
+
+ if (pdata == NULL) {
+ dev_err(&pdev->dev, "no platform data\n");
+ return -ENODEV;
+ }
+
+ vcc = devm_regulator_get_exclusive(&pdev->dev, "vled");
+ if (IS_ERR(vcc)) {
+ dev_err(&pdev->dev, "Cannot get vcc for %s\n", pdata->name);
+ return PTR_ERR(vcc);
+ }
+
+ led = devm_kzalloc(&pdev->dev, sizeof(*led), GFP_KERNEL);
+ if (led == NULL)
+ return -ENOMEM;
+
+ led->cdev.max_brightness = led_regulator_get_max_brightness(vcc);
+ if (pdata->brightness > led->cdev.max_brightness) {
+ dev_err(&pdev->dev, "Invalid default brightness %d\n",
+ pdata->brightness);
+ return -EINVAL;
+ }
+ led->value = pdata->brightness;
+
+ led->cdev.brightness_set = regulator_led_brightness_set;
+ led->cdev.name = pdata->name;
+ led->cdev.flags |= LED_CORE_SUSPENDRESUME;
+ led->vcc = vcc;
+
+ /* to handle correctly an already enabled regulator */
+ if (regulator_is_enabled(led->vcc))
+ led->enabled = 1;
+
+ mutex_init(&led->mutex);
+ INIT_WORK(&led->work, led_work);
+
+ platform_set_drvdata(pdev, led);
+
+ ret = led_classdev_register(&pdev->dev, &led->cdev);
+ if (ret < 0) {
+ cancel_work_sync(&led->work);
+ return ret;
+ }
+
+ /* to expose the default value to userspace */
+ led->cdev.brightness = led->value;
+
+ /* Set the default led status */
+ regulator_led_set_value(led);
+
+ return 0;
+}
+
+static int regulator_led_remove(struct platform_device *pdev)
+{
+ struct regulator_led *led = platform_get_drvdata(pdev);
+
+ led_classdev_unregister(&led->cdev);
+ cancel_work_sync(&led->work);
+ regulator_led_disable(led);
+ return 0;
+}
+
+static struct platform_driver regulator_led_driver = {
+ .driver = {
+ .name = "leds-regulator",
+ },
+ .probe = regulator_led_probe,
+ .remove = regulator_led_remove,
+};
+
+module_platform_driver(regulator_led_driver);
+
+MODULE_AUTHOR("Antonio Ospite <ospite@studenti.unina.it>");
+MODULE_DESCRIPTION("Regulator driven LED driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:leds-regulator");
diff --git a/kernel/drivers/leds/leds-s3c24xx.c b/kernel/drivers/leds/leds-s3c24xx.c
new file mode 100644
index 000000000..83641a7b2
--- /dev/null
+++ b/kernel/drivers/leds/leds-s3c24xx.c
@@ -0,0 +1,127 @@
+/* drivers/leds/leds-s3c24xx.c
+ *
+ * (c) 2006 Simtec Electronics
+ * http://armlinux.simtec.co.uk/
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C24XX - LEDs GPIO driver
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/leds.h>
+#include <linux/gpio.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/platform_data/leds-s3c24xx.h>
+
+#include <mach/regs-gpio.h>
+#include <plat/gpio-cfg.h>
+
+/* our context */
+
+struct s3c24xx_gpio_led {
+ struct led_classdev cdev;
+ struct s3c24xx_led_platdata *pdata;
+};
+
+static inline struct s3c24xx_gpio_led *pdev_to_gpio(struct platform_device *dev)
+{
+ return platform_get_drvdata(dev);
+}
+
+static inline struct s3c24xx_gpio_led *to_gpio(struct led_classdev *led_cdev)
+{
+ return container_of(led_cdev, struct s3c24xx_gpio_led, cdev);
+}
+
+static void s3c24xx_led_set(struct led_classdev *led_cdev,
+ enum led_brightness value)
+{
+ struct s3c24xx_gpio_led *led = to_gpio(led_cdev);
+ struct s3c24xx_led_platdata *pd = led->pdata;
+ int state = (value ? 1 : 0) ^ (pd->flags & S3C24XX_LEDF_ACTLOW);
+
+ /* there will be a short delay between setting the output and
+ * going from output to input when using tristate. */
+
+ gpio_set_value(pd->gpio, state);
+
+ if (pd->flags & S3C24XX_LEDF_TRISTATE) {
+ if (value)
+ gpio_direction_output(pd->gpio, state);
+ else
+ gpio_direction_input(pd->gpio);
+ }
+}
+
+static int s3c24xx_led_remove(struct platform_device *dev)
+{
+ struct s3c24xx_gpio_led *led = pdev_to_gpio(dev);
+
+ led_classdev_unregister(&led->cdev);
+
+ return 0;
+}
+
+static int s3c24xx_led_probe(struct platform_device *dev)
+{
+ struct s3c24xx_led_platdata *pdata = dev_get_platdata(&dev->dev);
+ struct s3c24xx_gpio_led *led;
+ int ret;
+
+ led = devm_kzalloc(&dev->dev, sizeof(struct s3c24xx_gpio_led),
+ GFP_KERNEL);
+ if (!led)
+ return -ENOMEM;
+
+ platform_set_drvdata(dev, led);
+
+ led->cdev.brightness_set = s3c24xx_led_set;
+ led->cdev.default_trigger = pdata->def_trigger;
+ led->cdev.name = pdata->name;
+ led->cdev.flags |= LED_CORE_SUSPENDRESUME;
+
+ led->pdata = pdata;
+
+ ret = devm_gpio_request(&dev->dev, pdata->gpio, "S3C24XX_LED");
+ if (ret < 0)
+ return ret;
+
+ /* no point in having a pull-up if we are always driving */
+
+ s3c_gpio_setpull(pdata->gpio, S3C_GPIO_PULL_NONE);
+
+ if (pdata->flags & S3C24XX_LEDF_TRISTATE)
+ gpio_direction_input(pdata->gpio);
+ else
+ gpio_direction_output(pdata->gpio,
+ pdata->flags & S3C24XX_LEDF_ACTLOW ? 1 : 0);
+
+ /* register our new led device */
+
+ ret = led_classdev_register(&dev->dev, &led->cdev);
+ if (ret < 0)
+ dev_err(&dev->dev, "led_classdev_register failed\n");
+
+ return ret;
+}
+
+static struct platform_driver s3c24xx_led_driver = {
+ .probe = s3c24xx_led_probe,
+ .remove = s3c24xx_led_remove,
+ .driver = {
+ .name = "s3c24xx_led",
+ },
+};
+
+module_platform_driver(s3c24xx_led_driver);
+
+MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>");
+MODULE_DESCRIPTION("S3C24XX LED driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:s3c24xx_led");
diff --git a/kernel/drivers/leds/leds-ss4200.c b/kernel/drivers/leds/leds-ss4200.c
new file mode 100644
index 000000000..046cb7008
--- /dev/null
+++ b/kernel/drivers/leds/leds-ss4200.c
@@ -0,0 +1,560 @@
+/*
+ * SS4200-E Hardware API
+ * Copyright (c) 2009, Intel Corporation.
+ * Copyright IBM Corporation, 2009
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * Author: Dave Hansen <dave@sr71.net>
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/dmi.h>
+#include <linux/init.h>
+#include <linux/ioport.h>
+#include <linux/kernel.h>
+#include <linux/leds.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/types.h>
+#include <linux/uaccess.h>
+
+MODULE_AUTHOR("Rodney Girod <rgirod@confocus.com>, Dave Hansen <dave@sr71.net>");
+MODULE_DESCRIPTION("Intel NAS/Home Server ICH7 GPIO Driver");
+MODULE_LICENSE("GPL");
+
+/*
+ * ICH7 LPC/GPIO PCI Config register offsets
+ */
+#define PMBASE 0x040
+#define GPIO_BASE 0x048
+#define GPIO_CTRL 0x04c
+#define GPIO_EN 0x010
+
+/*
+ * The ICH7 GPIO register block is 64 bytes in size.
+ */
+#define ICH7_GPIO_SIZE 64
+
+/*
+ * Define register offsets within the ICH7 register block.
+ */
+#define GPIO_USE_SEL 0x000
+#define GP_IO_SEL 0x004
+#define GP_LVL 0x00c
+#define GPO_BLINK 0x018
+#define GPI_INV 0x030
+#define GPIO_USE_SEL2 0x034
+#define GP_IO_SEL2 0x038
+#define GP_LVL2 0x03c
+
+/*
+ * PCI ID of the Intel ICH7 LPC Device within which the GPIO block lives.
+ */
+static const struct pci_device_id ich7_lpc_pci_id[] = {
+ { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH7_0) },
+ { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH7_1) },
+ { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH7_30) },
+ { } /* NULL entry */
+};
+
+MODULE_DEVICE_TABLE(pci, ich7_lpc_pci_id);
+
+static int __init ss4200_led_dmi_callback(const struct dmi_system_id *id)
+{
+ pr_info("detected '%s'\n", id->ident);
+ return 1;
+}
+
+static bool nodetect;
+module_param_named(nodetect, nodetect, bool, 0);
+MODULE_PARM_DESC(nodetect, "Skip DMI-based hardware detection");
+
+/*
+ * struct nas_led_whitelist - List of known good models
+ *
+ * Contains the known good models this driver is compatible with.
+ * When adding a new model try to be as strict as possible. This
+ * makes it possible to keep the false positives (the model is
+ * detected as working, but in reality it is not) as low as
+ * possible.
+ */
+static struct dmi_system_id nas_led_whitelist[] __initdata = {
+ {
+ .callback = ss4200_led_dmi_callback,
+ .ident = "Intel SS4200-E",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Intel"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "SS4200-E"),
+ DMI_MATCH(DMI_PRODUCT_VERSION, "1.00.00")
+ }
+ },
+ {}
+};
+
+/*
+ * Base I/O address assigned to the Power Management register block
+ */
+static u32 g_pm_io_base;
+
+/*
+ * Base I/O address assigned to the ICH7 GPIO register block
+ */
+static u32 nas_gpio_io_base;
+
+/*
+ * When we successfully register a region, we are returned a resource.
+ * We use these to identify which regions we need to release on our way
+ * back out.
+ */
+static struct resource *gp_gpio_resource;
+
+struct nasgpio_led {
+ char *name;
+ u32 gpio_bit;
+ struct led_classdev led_cdev;
+};
+
+/*
+ * gpio_bit(s) are the ICH7 GPIO bit assignments
+ */
+static struct nasgpio_led nasgpio_leds[] = {
+ { .name = "hdd1:blue:sata", .gpio_bit = 0 },
+ { .name = "hdd1:amber:sata", .gpio_bit = 1 },
+ { .name = "hdd2:blue:sata", .gpio_bit = 2 },
+ { .name = "hdd2:amber:sata", .gpio_bit = 3 },
+ { .name = "hdd3:blue:sata", .gpio_bit = 4 },
+ { .name = "hdd3:amber:sata", .gpio_bit = 5 },
+ { .name = "hdd4:blue:sata", .gpio_bit = 6 },
+ { .name = "hdd4:amber:sata", .gpio_bit = 7 },
+ { .name = "power:blue:power", .gpio_bit = 27},
+ { .name = "power:amber:power", .gpio_bit = 28},
+};
+
+#define NAS_RECOVERY 0x00000400 /* GPIO10 */
+
+static struct nasgpio_led *
+led_classdev_to_nasgpio_led(struct led_classdev *led_cdev)
+{
+ return container_of(led_cdev, struct nasgpio_led, led_cdev);
+}
+
+static struct nasgpio_led *get_led_named(char *name)
+{
+ int i;
+ for (i = 0; i < ARRAY_SIZE(nasgpio_leds); i++) {
+ if (strcmp(nasgpio_leds[i].name, name))
+ continue;
+ return &nasgpio_leds[i];
+ }
+ return NULL;
+}
+
+/*
+ * This protects access to the gpio ports.
+ */
+static DEFINE_SPINLOCK(nasgpio_gpio_lock);
+
+/*
+ * There are two gpio ports, one for blinking and the other
+ * for power. @port tells us if we're doing blinking or
+ * power control.
+ *
+ * Caller must hold nasgpio_gpio_lock
+ */
+static void __nasgpio_led_set_attr(struct led_classdev *led_cdev,
+ u32 port, u32 value)
+{
+ struct nasgpio_led *led = led_classdev_to_nasgpio_led(led_cdev);
+ u32 gpio_out;
+
+ gpio_out = inl(nas_gpio_io_base + port);
+ if (value)
+ gpio_out |= (1<<led->gpio_bit);
+ else
+ gpio_out &= ~(1<<led->gpio_bit);
+
+ outl(gpio_out, nas_gpio_io_base + port);
+}
+
+static void nasgpio_led_set_attr(struct led_classdev *led_cdev,
+ u32 port, u32 value)
+{
+ spin_lock(&nasgpio_gpio_lock);
+ __nasgpio_led_set_attr(led_cdev, port, value);
+ spin_unlock(&nasgpio_gpio_lock);
+}
+
+static u32 nasgpio_led_get_attr(struct led_classdev *led_cdev, u32 port)
+{
+ struct nasgpio_led *led = led_classdev_to_nasgpio_led(led_cdev);
+ u32 gpio_in;
+
+ spin_lock(&nasgpio_gpio_lock);
+ gpio_in = inl(nas_gpio_io_base + port);
+ spin_unlock(&nasgpio_gpio_lock);
+ if (gpio_in & (1<<led->gpio_bit))
+ return 1;
+ return 0;
+}
+
+/*
+ * There is actual brightness control in the hardware,
+ * but it is via smbus commands and not implemented
+ * in this driver.
+ */
+static void nasgpio_led_set_brightness(struct led_classdev *led_cdev,
+ enum led_brightness brightness)
+{
+ u32 setting = 0;
+ if (brightness >= LED_HALF)
+ setting = 1;
+ /*
+ * Hold the lock across both operations. This ensures
+ * consistency so that both the "turn off blinking"
+ * and "turn light off" operations complete as a set.
+ */
+ spin_lock(&nasgpio_gpio_lock);
+ /*
+ * LED class documentation asks that past blink state
+ * be disabled when brightness is turned to zero.
+ */
+ if (brightness == 0)
+ __nasgpio_led_set_attr(led_cdev, GPO_BLINK, 0);
+ __nasgpio_led_set_attr(led_cdev, GP_LVL, setting);
+ spin_unlock(&nasgpio_gpio_lock);
+}
+
+static int nasgpio_led_set_blink(struct led_classdev *led_cdev,
+ unsigned long *delay_on,
+ unsigned long *delay_off)
+{
+ u32 setting = 1;
+ if (!(*delay_on == 0 && *delay_off == 0) &&
+ !(*delay_on == 500 && *delay_off == 500))
+ return -EINVAL;
+ /*
+ * These are very approximate.
+ */
+ *delay_on = 500;
+ *delay_off = 500;
+
+ nasgpio_led_set_attr(led_cdev, GPO_BLINK, setting);
+
+ return 0;
+}
+
+
+/*
+ * Initialize the ICH7 GPIO registers for NAS usage. The BIOS should have
+ * already taken care of this, but we will do so in a non destructive manner
+ * so that we have what we need whether the BIOS did it or not.
+ */
+static int ich7_gpio_init(struct device *dev)
+{
+ int i;
+ u32 config_data = 0;
+ u32 all_nas_led = 0;
+
+ for (i = 0; i < ARRAY_SIZE(nasgpio_leds); i++)
+ all_nas_led |= (1<<nasgpio_leds[i].gpio_bit);
+
+ spin_lock(&nasgpio_gpio_lock);
+ /*
+ * We need to enable all of the GPIO lines used by the NAS box,
+ * so we will read the current Use Selection and add our usage
+ * to it. This should be benign with regard to the original
+ * BIOS configuration.
+ */
+ config_data = inl(nas_gpio_io_base + GPIO_USE_SEL);
+ dev_dbg(dev, ": Data read from GPIO_USE_SEL = 0x%08x\n", config_data);
+ config_data |= all_nas_led + NAS_RECOVERY;
+ outl(config_data, nas_gpio_io_base + GPIO_USE_SEL);
+ config_data = inl(nas_gpio_io_base + GPIO_USE_SEL);
+ dev_dbg(dev, ": GPIO_USE_SEL = 0x%08x\n\n", config_data);
+
+ /*
+ * The LED GPIO outputs need to be configured for output, so we
+ * will ensure that all LED lines are cleared for output and the
+ * RECOVERY line ready for input. This too should be benign with
+ * regard to BIOS configuration.
+ */
+ config_data = inl(nas_gpio_io_base + GP_IO_SEL);
+ dev_dbg(dev, ": Data read from GP_IO_SEL = 0x%08x\n",
+ config_data);
+ config_data &= ~all_nas_led;
+ config_data |= NAS_RECOVERY;
+ outl(config_data, nas_gpio_io_base + GP_IO_SEL);
+ config_data = inl(nas_gpio_io_base + GP_IO_SEL);
+ dev_dbg(dev, ": GP_IO_SEL = 0x%08x\n", config_data);
+
+ /*
+ * In our final system, the BIOS will initialize the state of all
+ * of the LEDs. For now, we turn them all off (or Low).
+ */
+ config_data = inl(nas_gpio_io_base + GP_LVL);
+ dev_dbg(dev, ": Data read from GP_LVL = 0x%08x\n", config_data);
+ /*
+ * In our final system, the BIOS will initialize the blink state of all
+ * of the LEDs. For now, we turn blink off for all of them.
+ */
+ config_data = inl(nas_gpio_io_base + GPO_BLINK);
+ dev_dbg(dev, ": Data read from GPO_BLINK = 0x%08x\n", config_data);
+
+ /*
+ * At this moment, I am unsure if anything needs to happen with GPI_INV
+ */
+ config_data = inl(nas_gpio_io_base + GPI_INV);
+ dev_dbg(dev, ": Data read from GPI_INV = 0x%08x\n", config_data);
+
+ spin_unlock(&nasgpio_gpio_lock);
+ return 0;
+}
+
+static void ich7_lpc_cleanup(struct device *dev)
+{
+ /*
+ * If we were given exclusive use of the GPIO
+ * I/O Address range, we must return it.
+ */
+ if (gp_gpio_resource) {
+ dev_dbg(dev, ": Releasing GPIO I/O addresses\n");
+ release_region(nas_gpio_io_base, ICH7_GPIO_SIZE);
+ gp_gpio_resource = NULL;
+ }
+}
+
+/*
+ * The OS has determined that the LPC of the Intel ICH7 Southbridge is present
+ * so we can retrive the required operational information and prepare the GPIO.
+ */
+static struct pci_dev *nas_gpio_pci_dev;
+static int ich7_lpc_probe(struct pci_dev *dev,
+ const struct pci_device_id *id)
+{
+ int status;
+ u32 gc = 0;
+
+ status = pci_enable_device(dev);
+ if (status) {
+ dev_err(&dev->dev, "pci_enable_device failed\n");
+ return -EIO;
+ }
+
+ nas_gpio_pci_dev = dev;
+ status = pci_read_config_dword(dev, PMBASE, &g_pm_io_base);
+ if (status)
+ goto out;
+ g_pm_io_base &= 0x00000ff80;
+
+ status = pci_read_config_dword(dev, GPIO_CTRL, &gc);
+ if (!(GPIO_EN & gc)) {
+ status = -EEXIST;
+ dev_info(&dev->dev,
+ "ERROR: The LPC GPIO Block has not been enabled.\n");
+ goto out;
+ }
+
+ status = pci_read_config_dword(dev, GPIO_BASE, &nas_gpio_io_base);
+ if (0 > status) {
+ dev_info(&dev->dev, "Unable to read GPIOBASE.\n");
+ goto out;
+ }
+ dev_dbg(&dev->dev, ": GPIOBASE = 0x%08x\n", nas_gpio_io_base);
+ nas_gpio_io_base &= 0x00000ffc0;
+
+ /*
+ * Insure that we have exclusive access to the GPIO I/O address range.
+ */
+ gp_gpio_resource = request_region(nas_gpio_io_base, ICH7_GPIO_SIZE,
+ KBUILD_MODNAME);
+ if (NULL == gp_gpio_resource) {
+ dev_info(&dev->dev,
+ "ERROR Unable to register GPIO I/O addresses.\n");
+ status = -1;
+ goto out;
+ }
+
+ /*
+ * Initialize the GPIO for NAS/Home Server Use
+ */
+ ich7_gpio_init(&dev->dev);
+
+out:
+ if (status) {
+ ich7_lpc_cleanup(&dev->dev);
+ pci_disable_device(dev);
+ }
+ return status;
+}
+
+static void ich7_lpc_remove(struct pci_dev *dev)
+{
+ ich7_lpc_cleanup(&dev->dev);
+ pci_disable_device(dev);
+}
+
+/*
+ * pci_driver structure passed to the PCI modules
+ */
+static struct pci_driver nas_gpio_pci_driver = {
+ .name = KBUILD_MODNAME,
+ .id_table = ich7_lpc_pci_id,
+ .probe = ich7_lpc_probe,
+ .remove = ich7_lpc_remove,
+};
+
+static struct led_classdev *get_classdev_for_led_nr(int nr)
+{
+ struct nasgpio_led *nas_led = &nasgpio_leds[nr];
+ struct led_classdev *led = &nas_led->led_cdev;
+ return led;
+}
+
+
+static void set_power_light_amber_noblink(void)
+{
+ struct nasgpio_led *amber = get_led_named("power:amber:power");
+ struct nasgpio_led *blue = get_led_named("power:blue:power");
+
+ if (!amber || !blue)
+ return;
+ /*
+ * LED_OFF implies disabling future blinking
+ */
+ pr_debug("setting blue off and amber on\n");
+
+ nasgpio_led_set_brightness(&blue->led_cdev, LED_OFF);
+ nasgpio_led_set_brightness(&amber->led_cdev, LED_FULL);
+}
+
+static ssize_t nas_led_blink_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct led_classdev *led = dev_get_drvdata(dev);
+ int blinking = 0;
+ if (nasgpio_led_get_attr(led, GPO_BLINK))
+ blinking = 1;
+ return sprintf(buf, "%u\n", blinking);
+}
+
+static ssize_t nas_led_blink_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t size)
+{
+ int ret;
+ struct led_classdev *led = dev_get_drvdata(dev);
+ unsigned long blink_state;
+
+ ret = kstrtoul(buf, 10, &blink_state);
+ if (ret)
+ return ret;
+
+ nasgpio_led_set_attr(led, GPO_BLINK, blink_state);
+
+ return size;
+}
+
+static DEVICE_ATTR(blink, 0644, nas_led_blink_show, nas_led_blink_store);
+
+static struct attribute *nasgpio_led_attrs[] = {
+ &dev_attr_blink.attr,
+ NULL
+};
+ATTRIBUTE_GROUPS(nasgpio_led);
+
+static int register_nasgpio_led(int led_nr)
+{
+ int ret;
+ struct nasgpio_led *nas_led = &nasgpio_leds[led_nr];
+ struct led_classdev *led = get_classdev_for_led_nr(led_nr);
+
+ led->name = nas_led->name;
+ led->brightness = LED_OFF;
+ if (nasgpio_led_get_attr(led, GP_LVL))
+ led->brightness = LED_FULL;
+ led->brightness_set = nasgpio_led_set_brightness;
+ led->blink_set = nasgpio_led_set_blink;
+ led->groups = nasgpio_led_groups;
+ ret = led_classdev_register(&nas_gpio_pci_dev->dev, led);
+ if (ret)
+ return ret;
+
+ return 0;
+}
+
+static void unregister_nasgpio_led(int led_nr)
+{
+ struct led_classdev *led = get_classdev_for_led_nr(led_nr);
+ led_classdev_unregister(led);
+}
+/*
+ * module load/initialization
+ */
+static int __init nas_gpio_init(void)
+{
+ int i;
+ int ret = 0;
+ int nr_devices = 0;
+
+ nr_devices = dmi_check_system(nas_led_whitelist);
+ if (nodetect) {
+ pr_info("skipping hardware autodetection\n");
+ pr_info("Please send 'dmidecode' output to dave@sr71.net\n");
+ nr_devices++;
+ }
+
+ if (nr_devices <= 0) {
+ pr_info("no LED devices found\n");
+ return -ENODEV;
+ }
+
+ pr_info("registering PCI driver\n");
+ ret = pci_register_driver(&nas_gpio_pci_driver);
+ if (ret)
+ return ret;
+ for (i = 0; i < ARRAY_SIZE(nasgpio_leds); i++) {
+ ret = register_nasgpio_led(i);
+ if (ret)
+ goto out_err;
+ }
+ /*
+ * When the system powers on, the BIOS leaves the power
+ * light blue and blinking. This will turn it solid
+ * amber once the driver is loaded.
+ */
+ set_power_light_amber_noblink();
+ return 0;
+out_err:
+ for (i--; i >= 0; i--)
+ unregister_nasgpio_led(i);
+ pci_unregister_driver(&nas_gpio_pci_driver);
+ return ret;
+}
+
+/*
+ * module unload
+ */
+static void __exit nas_gpio_exit(void)
+{
+ int i;
+ pr_info("Unregistering driver\n");
+ for (i = 0; i < ARRAY_SIZE(nasgpio_leds); i++)
+ unregister_nasgpio_led(i);
+ pci_unregister_driver(&nas_gpio_pci_driver);
+}
+
+module_init(nas_gpio_init);
+module_exit(nas_gpio_exit);
diff --git a/kernel/drivers/leds/leds-sunfire.c b/kernel/drivers/leds/leds-sunfire.c
new file mode 100644
index 000000000..c2553c54f
--- /dev/null
+++ b/kernel/drivers/leds/leds-sunfire.c
@@ -0,0 +1,262 @@
+/* leds-sunfire.c: SUNW,Ultra-Enterprise LED driver.
+ *
+ * Copyright (C) 2008 David S. Miller <davem@davemloft.net>
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/leds.h>
+#include <linux/io.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+
+#include <asm/fhc.h>
+#include <asm/upa.h>
+
+MODULE_AUTHOR("David S. Miller (davem@davemloft.net)");
+MODULE_DESCRIPTION("Sun Fire LED driver");
+MODULE_LICENSE("GPL");
+
+struct sunfire_led {
+ struct led_classdev led_cdev;
+ void __iomem *reg;
+};
+#define to_sunfire_led(d) container_of(d, struct sunfire_led, led_cdev)
+
+static void __clockboard_set(struct led_classdev *led_cdev,
+ enum led_brightness led_val, u8 bit)
+{
+ struct sunfire_led *p = to_sunfire_led(led_cdev);
+ u8 reg = upa_readb(p->reg);
+
+ switch (bit) {
+ case CLOCK_CTRL_LLED:
+ if (led_val)
+ reg &= ~bit;
+ else
+ reg |= bit;
+ break;
+
+ default:
+ if (led_val)
+ reg |= bit;
+ else
+ reg &= ~bit;
+ break;
+ }
+ upa_writeb(reg, p->reg);
+}
+
+static void clockboard_left_set(struct led_classdev *led_cdev,
+ enum led_brightness led_val)
+{
+ __clockboard_set(led_cdev, led_val, CLOCK_CTRL_LLED);
+}
+
+static void clockboard_middle_set(struct led_classdev *led_cdev,
+ enum led_brightness led_val)
+{
+ __clockboard_set(led_cdev, led_val, CLOCK_CTRL_MLED);
+}
+
+static void clockboard_right_set(struct led_classdev *led_cdev,
+ enum led_brightness led_val)
+{
+ __clockboard_set(led_cdev, led_val, CLOCK_CTRL_RLED);
+}
+
+static void __fhc_set(struct led_classdev *led_cdev,
+ enum led_brightness led_val, u32 bit)
+{
+ struct sunfire_led *p = to_sunfire_led(led_cdev);
+ u32 reg = upa_readl(p->reg);
+
+ switch (bit) {
+ case FHC_CONTROL_LLED:
+ if (led_val)
+ reg &= ~bit;
+ else
+ reg |= bit;
+ break;
+
+ default:
+ if (led_val)
+ reg |= bit;
+ else
+ reg &= ~bit;
+ break;
+ }
+ upa_writel(reg, p->reg);
+}
+
+static void fhc_left_set(struct led_classdev *led_cdev,
+ enum led_brightness led_val)
+{
+ __fhc_set(led_cdev, led_val, FHC_CONTROL_LLED);
+}
+
+static void fhc_middle_set(struct led_classdev *led_cdev,
+ enum led_brightness led_val)
+{
+ __fhc_set(led_cdev, led_val, FHC_CONTROL_MLED);
+}
+
+static void fhc_right_set(struct led_classdev *led_cdev,
+ enum led_brightness led_val)
+{
+ __fhc_set(led_cdev, led_val, FHC_CONTROL_RLED);
+}
+
+typedef void (*set_handler)(struct led_classdev *, enum led_brightness);
+struct led_type {
+ const char *name;
+ set_handler handler;
+ const char *default_trigger;
+};
+
+#define NUM_LEDS_PER_BOARD 3
+struct sunfire_drvdata {
+ struct sunfire_led leds[NUM_LEDS_PER_BOARD];
+};
+
+static int sunfire_led_generic_probe(struct platform_device *pdev,
+ struct led_type *types)
+{
+ struct sunfire_drvdata *p;
+ int i, err;
+
+ if (pdev->num_resources != 1) {
+ dev_err(&pdev->dev, "Wrong number of resources %d, should be 1\n",
+ pdev->num_resources);
+ return -EINVAL;
+ }
+
+ p = devm_kzalloc(&pdev->dev, sizeof(*p), GFP_KERNEL);
+ if (!p)
+ return -ENOMEM;
+
+ for (i = 0; i < NUM_LEDS_PER_BOARD; i++) {
+ struct led_classdev *lp = &p->leds[i].led_cdev;
+
+ p->leds[i].reg = (void __iomem *) pdev->resource[0].start;
+ lp->name = types[i].name;
+ lp->brightness = LED_FULL;
+ lp->brightness_set = types[i].handler;
+ lp->default_trigger = types[i].default_trigger;
+
+ err = led_classdev_register(&pdev->dev, lp);
+ if (err) {
+ dev_err(&pdev->dev, "Could not register %s LED\n",
+ lp->name);
+ for (i--; i >= 0; i--)
+ led_classdev_unregister(&p->leds[i].led_cdev);
+ return err;
+ }
+ }
+
+ platform_set_drvdata(pdev, p);
+
+ return 0;
+}
+
+static int sunfire_led_generic_remove(struct platform_device *pdev)
+{
+ struct sunfire_drvdata *p = platform_get_drvdata(pdev);
+ int i;
+
+ for (i = 0; i < NUM_LEDS_PER_BOARD; i++)
+ led_classdev_unregister(&p->leds[i].led_cdev);
+
+ return 0;
+}
+
+static struct led_type clockboard_led_types[NUM_LEDS_PER_BOARD] = {
+ {
+ .name = "clockboard-left",
+ .handler = clockboard_left_set,
+ },
+ {
+ .name = "clockboard-middle",
+ .handler = clockboard_middle_set,
+ },
+ {
+ .name = "clockboard-right",
+ .handler = clockboard_right_set,
+ .default_trigger = "heartbeat",
+ },
+};
+
+static int sunfire_clockboard_led_probe(struct platform_device *pdev)
+{
+ return sunfire_led_generic_probe(pdev, clockboard_led_types);
+}
+
+static struct led_type fhc_led_types[NUM_LEDS_PER_BOARD] = {
+ {
+ .name = "fhc-left",
+ .handler = fhc_left_set,
+ },
+ {
+ .name = "fhc-middle",
+ .handler = fhc_middle_set,
+ },
+ {
+ .name = "fhc-right",
+ .handler = fhc_right_set,
+ .default_trigger = "heartbeat",
+ },
+};
+
+static int sunfire_fhc_led_probe(struct platform_device *pdev)
+{
+ return sunfire_led_generic_probe(pdev, fhc_led_types);
+}
+
+MODULE_ALIAS("platform:sunfire-clockboard-leds");
+MODULE_ALIAS("platform:sunfire-fhc-leds");
+
+static struct platform_driver sunfire_clockboard_led_driver = {
+ .probe = sunfire_clockboard_led_probe,
+ .remove = sunfire_led_generic_remove,
+ .driver = {
+ .name = "sunfire-clockboard-leds",
+ },
+};
+
+static struct platform_driver sunfire_fhc_led_driver = {
+ .probe = sunfire_fhc_led_probe,
+ .remove = sunfire_led_generic_remove,
+ .driver = {
+ .name = "sunfire-fhc-leds",
+ },
+};
+
+static int __init sunfire_leds_init(void)
+{
+ int err = platform_driver_register(&sunfire_clockboard_led_driver);
+
+ if (err) {
+ pr_err("Could not register clock board LED driver\n");
+ return err;
+ }
+
+ err = platform_driver_register(&sunfire_fhc_led_driver);
+ if (err) {
+ pr_err("Could not register FHC LED driver\n");
+ platform_driver_unregister(&sunfire_clockboard_led_driver);
+ }
+
+ return err;
+}
+
+static void __exit sunfire_leds_exit(void)
+{
+ platform_driver_unregister(&sunfire_clockboard_led_driver);
+ platform_driver_unregister(&sunfire_fhc_led_driver);
+}
+
+module_init(sunfire_leds_init);
+module_exit(sunfire_leds_exit);
diff --git a/kernel/drivers/leds/leds-syscon.c b/kernel/drivers/leds/leds-syscon.c
new file mode 100644
index 000000000..6896e2d9b
--- /dev/null
+++ b/kernel/drivers/leds/leds-syscon.c
@@ -0,0 +1,167 @@
+/*
+ * Generic Syscon LEDs Driver
+ *
+ * Copyright (c) 2014, Linaro Limited
+ * Author: Linus Walleij <linus.walleij@linaro.org>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#include <linux/io.h>
+#include <linux/of_device.h>
+#include <linux/of_address.h>
+#include <linux/platform_device.h>
+#include <linux/stat.h>
+#include <linux/slab.h>
+#include <linux/mfd/syscon.h>
+#include <linux/regmap.h>
+#include <linux/leds.h>
+
+/**
+ * struct syscon_led - state container for syscon based LEDs
+ * @cdev: LED class device for this LED
+ * @map: regmap to access the syscon device backing this LED
+ * @offset: the offset into the syscon regmap for the LED register
+ * @mask: the bit in the register corresponding to the LED
+ * @state: current state of the LED
+ */
+struct syscon_led {
+ struct led_classdev cdev;
+ struct regmap *map;
+ u32 offset;
+ u32 mask;
+ bool state;
+};
+
+static void syscon_led_set(struct led_classdev *led_cdev,
+ enum led_brightness value)
+{
+ struct syscon_led *sled =
+ container_of(led_cdev, struct syscon_led, cdev);
+ u32 val;
+ int ret;
+
+ if (value == LED_OFF) {
+ val = 0;
+ sled->state = false;
+ } else {
+ val = sled->mask;
+ sled->state = true;
+ }
+
+ ret = regmap_update_bits(sled->map, sled->offset, sled->mask, val);
+ if (ret < 0)
+ dev_err(sled->cdev.dev, "error updating LED status\n");
+}
+
+static int __init syscon_leds_spawn(struct device_node *np,
+ struct device *dev,
+ struct regmap *map)
+{
+ struct device_node *child;
+ int ret;
+
+ for_each_available_child_of_node(np, child) {
+ struct syscon_led *sled;
+ const char *state;
+
+ /* Only check for register-bit-leds */
+ if (of_property_match_string(child, "compatible",
+ "register-bit-led") < 0)
+ continue;
+
+ sled = devm_kzalloc(dev, sizeof(*sled), GFP_KERNEL);
+ if (!sled)
+ return -ENOMEM;
+
+ sled->map = map;
+
+ if (of_property_read_u32(child, "offset", &sled->offset))
+ return -EINVAL;
+ if (of_property_read_u32(child, "mask", &sled->mask))
+ return -EINVAL;
+ sled->cdev.name =
+ of_get_property(child, "label", NULL) ? : child->name;
+ sled->cdev.default_trigger =
+ of_get_property(child, "linux,default-trigger", NULL);
+
+ state = of_get_property(child, "default-state", NULL);
+ if (state) {
+ if (!strcmp(state, "keep")) {
+ u32 val;
+
+ ret = regmap_read(map, sled->offset, &val);
+ if (ret < 0)
+ return ret;
+ sled->state = !!(val & sled->mask);
+ } else if (!strcmp(state, "on")) {
+ sled->state = true;
+ ret = regmap_update_bits(map, sled->offset,
+ sled->mask,
+ sled->mask);
+ if (ret < 0)
+ return ret;
+ } else {
+ sled->state = false;
+ ret = regmap_update_bits(map, sled->offset,
+ sled->mask, 0);
+ if (ret < 0)
+ return ret;
+ }
+ }
+ sled->cdev.brightness_set = syscon_led_set;
+
+ ret = led_classdev_register(dev, &sled->cdev);
+ if (ret < 0)
+ return ret;
+
+ dev_info(dev, "registered LED %s\n", sled->cdev.name);
+ }
+ return 0;
+}
+
+static int __init syscon_leds_init(void)
+{
+ struct device_node *np;
+
+ for_each_of_allnodes(np) {
+ struct platform_device *pdev;
+ struct regmap *map;
+ int ret;
+
+ if (!of_device_is_compatible(np, "syscon"))
+ continue;
+
+ map = syscon_node_to_regmap(np);
+ if (IS_ERR(map)) {
+ pr_err("error getting regmap for syscon LEDs\n");
+ continue;
+ }
+
+ /*
+ * If the map is there, the device should be there, we allocate
+ * memory on the syscon device's behalf here.
+ */
+ pdev = of_find_device_by_node(np);
+ if (!pdev)
+ return -ENODEV;
+ ret = syscon_leds_spawn(np, &pdev->dev, map);
+ if (ret)
+ dev_err(&pdev->dev, "could not spawn syscon LEDs\n");
+ }
+
+ return 0;
+}
+device_initcall(syscon_leds_init);
diff --git a/kernel/drivers/leds/leds-tca6507.c b/kernel/drivers/leds/leds-tca6507.c
new file mode 100644
index 000000000..20fa8e77f
--- /dev/null
+++ b/kernel/drivers/leds/leds-tca6507.c
@@ -0,0 +1,845 @@
+/*
+ * leds-tca6507
+ *
+ * The TCA6507 is a programmable LED controller that can drive 7
+ * separate lines either by holding them low, or by pulsing them
+ * with modulated width.
+ * The modulation can be varied in a simple pattern to produce a
+ * blink or double-blink.
+ *
+ * This driver can configure each line either as a 'GPIO' which is
+ * out-only (pull-up resistor required) or as an LED with variable
+ * brightness and hardware-assisted blinking.
+ *
+ * Apart from OFF and ON there are three programmable brightness
+ * levels which can be programmed from 0 to 15 and indicate how many
+ * 500usec intervals in each 8msec that the led is 'on'. The levels
+ * are named MASTER, BANK0 and BANK1.
+ *
+ * There are two different blink rates that can be programmed, each
+ * with separate time for rise, on, fall, off and second-off. Thus if
+ * 3 or more different non-trivial rates are required, software must
+ * be used for the extra rates. The two different blink rates must
+ * align with the two levels BANK0 and BANK1. This driver does not
+ * support double-blink so 'second-off' always matches 'off'.
+ *
+ * Only 16 different times can be programmed in a roughly logarithmic
+ * scale from 64ms to 16320ms. To be precise the possible times are:
+ * 0, 64, 128, 192, 256, 384, 512, 768,
+ * 1024, 1536, 2048, 3072, 4096, 5760, 8128, 16320
+ *
+ * Times that cannot be closely matched with these must be handled in
+ * software. This driver allows 12.5% error in matching.
+ *
+ * This driver does not allow rise/fall rates to be set explicitly.
+ * When trying to match a given 'on' or 'off' period, an appropriate
+ * pair of 'change' and 'hold' times are chosen to get a close match.
+ * If the target delay is even, the 'change' number will be the
+ * smaller; if odd, the 'hold' number will be the smaller.
+
+ * Choosing pairs of delays with 12.5% errors allows us to match
+ * delays in the ranges: 56-72, 112-144, 168-216, 224-27504,
+ * 28560-36720.
+ * 26% of the achievable sums can be matched by multiple pairings.
+ * For example 1536 == 1536+0, 1024+512, or 768+768.
+ * This driver will always choose the pairing with the least
+ * maximum - 768+768 in this case. Other pairings are not available.
+ *
+ * Access to the 3 levels and 2 blinks are on a first-come,
+ * first-served basis. Access can be shared by multiple leds if they
+ * have the same level and either same blink rates, or some don't
+ * blink. When a led changes, it relinquishes access and tries again,
+ * so it might lose access to hardware blink.
+ *
+ * If a blink engine cannot be allocated, software blink is used. If
+ * the desired brightness cannot be allocated, the closest available
+ * non-zero brightness is used. As 'full' is always available, the
+ * worst case would be to have two different blink rates at '1', with
+ * Max at '2', then other leds will have to choose between '2' and
+ * '16'. Hopefully this is not likely.
+ *
+ * Each bank (BANK0 and BANK1) has two usage counts - LEDs using the
+ * brightness and LEDs using the blink. It can only be reprogrammed
+ * when the appropriate counter is zero. The MASTER level has a
+ * single usage count.
+ *
+ * Each LED has programmable 'on' and 'off' time as milliseconds.
+ * With each there is a flag saying if it was explicitly requested or
+ * defaulted. Similarly the banks know if each time was explicit or a
+ * default. Defaults are permitted to be changed freely - they are
+ * not recognised when matching.
+ *
+ *
+ * An led-tca6507 device must be provided with platform data or
+ * configured via devicetree.
+ *
+ * The platform-data lists for each output: the name, default trigger,
+ * and whether the signal is being used as a GPIO rather than an LED.
+ * 'struct led_plaform_data' is used for this. If 'name' is NULL, the
+ * output isn't used. If 'flags' is TCA6507_MAKE_GPIO, the output is
+ * a GPO. The "struct led_platform_data" can be embedded in a "struct
+ * tca6507_platform_data" which adds a 'gpio_base' for the GPIOs, and
+ * a 'setup' callback which is called once the GPIOs are available.
+ *
+ * When configured via devicetree there is one child for each output.
+ * The "reg" determines the output number and "compatible" determines
+ * whether it is an LED or a GPIO. "linux,default-trigger" can set a
+ * default trigger.
+ */
+
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/leds.h>
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include <linux/gpio.h>
+#include <linux/workqueue.h>
+#include <linux/leds-tca6507.h>
+#include <linux/of.h>
+
+/* LED select registers determine the source that drives LED outputs */
+#define TCA6507_LS_LED_OFF 0x0 /* Output HI-Z (off) */
+#define TCA6507_LS_LED_OFF1 0x1 /* Output HI-Z (off) - not used */
+#define TCA6507_LS_LED_PWM0 0x2 /* Output LOW with Bank0 rate */
+#define TCA6507_LS_LED_PWM1 0x3 /* Output LOW with Bank1 rate */
+#define TCA6507_LS_LED_ON 0x4 /* Output LOW (on) */
+#define TCA6507_LS_LED_MIR 0x5 /* Output LOW with Master Intensity */
+#define TCA6507_LS_BLINK0 0x6 /* Blink at Bank0 rate */
+#define TCA6507_LS_BLINK1 0x7 /* Blink at Bank1 rate */
+
+enum {
+ BANK0,
+ BANK1,
+ MASTER,
+};
+static int bank_source[3] = {
+ TCA6507_LS_LED_PWM0,
+ TCA6507_LS_LED_PWM1,
+ TCA6507_LS_LED_MIR,
+};
+static int blink_source[2] = {
+ TCA6507_LS_BLINK0,
+ TCA6507_LS_BLINK1,
+};
+
+/* PWM registers */
+#define TCA6507_REG_CNT 11
+
+/*
+ * 0x00, 0x01, 0x02 encode the TCA6507_LS_* values, each output
+ * owns one bit in each register
+ */
+#define TCA6507_FADE_ON 0x03
+#define TCA6507_FULL_ON 0x04
+#define TCA6507_FADE_OFF 0x05
+#define TCA6507_FIRST_OFF 0x06
+#define TCA6507_SECOND_OFF 0x07
+#define TCA6507_MAX_INTENSITY 0x08
+#define TCA6507_MASTER_INTENSITY 0x09
+#define TCA6507_INITIALIZE 0x0A
+
+#define INIT_CODE 0x8
+
+#define TIMECODES 16
+static int time_codes[TIMECODES] = {
+ 0, 64, 128, 192, 256, 384, 512, 768,
+ 1024, 1536, 2048, 3072, 4096, 5760, 8128, 16320
+};
+
+/* Convert an led.brightness level (0..255) to a TCA6507 level (0..15) */
+static inline int TO_LEVEL(int brightness)
+{
+ return brightness >> 4;
+}
+
+/* ...and convert back */
+static inline int TO_BRIGHT(int level)
+{
+ if (level)
+ return (level << 4) | 0xf;
+ return 0;
+}
+
+#define NUM_LEDS 7
+struct tca6507_chip {
+ int reg_set; /* One bit per register where
+ * a '1' means the register
+ * should be written */
+ u8 reg_file[TCA6507_REG_CNT];
+ /* Bank 2 is Master Intensity and doesn't use times */
+ struct bank {
+ int level;
+ int ontime, offtime;
+ int on_dflt, off_dflt;
+ int time_use, level_use;
+ } bank[3];
+ struct i2c_client *client;
+ struct work_struct work;
+ spinlock_t lock;
+
+ struct tca6507_led {
+ struct tca6507_chip *chip;
+ struct led_classdev led_cdev;
+ int num;
+ int ontime, offtime;
+ int on_dflt, off_dflt;
+ int bank; /* Bank used, or -1 */
+ int blink; /* Set if hardware-blinking */
+ } leds[NUM_LEDS];
+#ifdef CONFIG_GPIOLIB
+ struct gpio_chip gpio;
+ const char *gpio_name[NUM_LEDS];
+ int gpio_map[NUM_LEDS];
+#endif
+};
+
+static const struct i2c_device_id tca6507_id[] = {
+ { "tca6507" },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, tca6507_id);
+
+static int choose_times(int msec, int *c1p, int *c2p)
+{
+ /*
+ * Choose two timecodes which add to 'msec' as near as
+ * possible. The first returned is the 'on' or 'off' time.
+ * The second is to be used as a 'fade-on' or 'fade-off' time.
+ * If 'msec' is even, the first will not be smaller than the
+ * second. If 'msec' is odd, the first will not be larger
+ * than the second.
+ * If we cannot get a sum within 1/8 of 'msec' fail with
+ * -EINVAL, otherwise return the sum that was achieved, plus 1
+ * if the first is smaller.
+ * If two possibilities are equally good (e.g. 512+0,
+ * 256+256), choose the first pair so there is more
+ * change-time visible (i.e. it is softer).
+ */
+ int c1, c2;
+ int tmax = msec * 9 / 8;
+ int tmin = msec * 7 / 8;
+ int diff = 65536;
+
+ /* We start at '1' to ensure we never even think of choosing a
+ * total time of '0'.
+ */
+ for (c1 = 1; c1 < TIMECODES; c1++) {
+ int t = time_codes[c1];
+ if (t*2 < tmin)
+ continue;
+ if (t > tmax)
+ break;
+ for (c2 = 0; c2 <= c1; c2++) {
+ int tt = t + time_codes[c2];
+ int d;
+ if (tt < tmin)
+ continue;
+ if (tt > tmax)
+ break;
+ /* This works! */
+ d = abs(msec - tt);
+ if (d >= diff)
+ continue;
+ /* Best yet */
+ *c1p = c1;
+ *c2p = c2;
+ diff = d;
+ if (d == 0)
+ return msec;
+ }
+ }
+ if (diff < 65536) {
+ int actual;
+ if (msec & 1) {
+ c1 = *c2p;
+ *c2p = *c1p;
+ *c1p = c1;
+ }
+ actual = time_codes[*c1p] + time_codes[*c2p];
+ if (*c1p < *c2p)
+ return actual + 1;
+ else
+ return actual;
+ }
+ /* No close match */
+ return -EINVAL;
+}
+
+/*
+ * Update the register file with the appropriate 3-bit state for the
+ * given led.
+ */
+static void set_select(struct tca6507_chip *tca, int led, int val)
+{
+ int mask = (1 << led);
+ int bit;
+
+ for (bit = 0; bit < 3; bit++) {
+ int n = tca->reg_file[bit] & ~mask;
+ if (val & (1 << bit))
+ n |= mask;
+ if (tca->reg_file[bit] != n) {
+ tca->reg_file[bit] = n;
+ tca->reg_set |= (1 << bit);
+ }
+ }
+}
+
+/* Update the register file with the appropriate 4-bit code for one
+ * bank or other. This can be used for timers, for levels, or for
+ * initialization.
+ */
+static void set_code(struct tca6507_chip *tca, int reg, int bank, int new)
+{
+ int mask = 0xF;
+ int n;
+ if (bank) {
+ mask <<= 4;
+ new <<= 4;
+ }
+ n = tca->reg_file[reg] & ~mask;
+ n |= new;
+ if (tca->reg_file[reg] != n) {
+ tca->reg_file[reg] = n;
+ tca->reg_set |= 1 << reg;
+ }
+}
+
+/* Update brightness level. */
+static void set_level(struct tca6507_chip *tca, int bank, int level)
+{
+ switch (bank) {
+ case BANK0:
+ case BANK1:
+ set_code(tca, TCA6507_MAX_INTENSITY, bank, level);
+ break;
+ case MASTER:
+ set_code(tca, TCA6507_MASTER_INTENSITY, 0, level);
+ break;
+ }
+ tca->bank[bank].level = level;
+}
+
+/* Record all relevant time codes for a given bank */
+static void set_times(struct tca6507_chip *tca, int bank)
+{
+ int c1, c2;
+ int result;
+
+ result = choose_times(tca->bank[bank].ontime, &c1, &c2);
+ dev_dbg(&tca->client->dev,
+ "Chose on times %d(%d) %d(%d) for %dms\n",
+ c1, time_codes[c1],
+ c2, time_codes[c2], tca->bank[bank].ontime);
+ set_code(tca, TCA6507_FADE_ON, bank, c2);
+ set_code(tca, TCA6507_FULL_ON, bank, c1);
+ tca->bank[bank].ontime = result;
+
+ result = choose_times(tca->bank[bank].offtime, &c1, &c2);
+ dev_dbg(&tca->client->dev,
+ "Chose off times %d(%d) %d(%d) for %dms\n",
+ c1, time_codes[c1],
+ c2, time_codes[c2], tca->bank[bank].offtime);
+ set_code(tca, TCA6507_FADE_OFF, bank, c2);
+ set_code(tca, TCA6507_FIRST_OFF, bank, c1);
+ set_code(tca, TCA6507_SECOND_OFF, bank, c1);
+ tca->bank[bank].offtime = result;
+
+ set_code(tca, TCA6507_INITIALIZE, bank, INIT_CODE);
+}
+
+/* Write all needed register of tca6507 */
+
+static void tca6507_work(struct work_struct *work)
+{
+ struct tca6507_chip *tca = container_of(work, struct tca6507_chip,
+ work);
+ struct i2c_client *cl = tca->client;
+ int set;
+ u8 file[TCA6507_REG_CNT];
+ int r;
+
+ spin_lock_irq(&tca->lock);
+ set = tca->reg_set;
+ memcpy(file, tca->reg_file, TCA6507_REG_CNT);
+ tca->reg_set = 0;
+ spin_unlock_irq(&tca->lock);
+
+ for (r = 0; r < TCA6507_REG_CNT; r++)
+ if (set & (1<<r))
+ i2c_smbus_write_byte_data(cl, r, file[r]);
+}
+
+static void led_release(struct tca6507_led *led)
+{
+ /* If led owns any resource, release it. */
+ struct tca6507_chip *tca = led->chip;
+ if (led->bank >= 0) {
+ struct bank *b = tca->bank + led->bank;
+ if (led->blink)
+ b->time_use--;
+ b->level_use--;
+ }
+ led->blink = 0;
+ led->bank = -1;
+}
+
+static int led_prepare(struct tca6507_led *led)
+{
+ /* Assign this led to a bank, configuring that bank if
+ * necessary. */
+ int level = TO_LEVEL(led->led_cdev.brightness);
+ struct tca6507_chip *tca = led->chip;
+ int c1, c2;
+ int i;
+ struct bank *b;
+ int need_init = 0;
+
+ led->led_cdev.brightness = TO_BRIGHT(level);
+ if (level == 0) {
+ set_select(tca, led->num, TCA6507_LS_LED_OFF);
+ return 0;
+ }
+
+ if (led->ontime == 0 || led->offtime == 0) {
+ /*
+ * Just set the brightness, choosing first usable
+ * bank. If none perfect, choose best. Count
+ * backwards so we check MASTER bank first to avoid
+ * wasting a timer.
+ */
+ int best = -1;/* full-on */
+ int diff = 15-level;
+
+ if (level == 15) {
+ set_select(tca, led->num, TCA6507_LS_LED_ON);
+ return 0;
+ }
+
+ for (i = MASTER; i >= BANK0; i--) {
+ int d;
+ if (tca->bank[i].level == level ||
+ tca->bank[i].level_use == 0) {
+ best = i;
+ break;
+ }
+ d = abs(level - tca->bank[i].level);
+ if (d < diff) {
+ diff = d;
+ best = i;
+ }
+ }
+ if (best == -1) {
+ /* Best brightness is full-on */
+ set_select(tca, led->num, TCA6507_LS_LED_ON);
+ led->led_cdev.brightness = LED_FULL;
+ return 0;
+ }
+
+ if (!tca->bank[best].level_use)
+ set_level(tca, best, level);
+
+ tca->bank[best].level_use++;
+ led->bank = best;
+ set_select(tca, led->num, bank_source[best]);
+ led->led_cdev.brightness = TO_BRIGHT(tca->bank[best].level);
+ return 0;
+ }
+
+ /*
+ * We have on/off time so we need to try to allocate a timing
+ * bank. First check if times are compatible with hardware
+ * and give up if not.
+ */
+ if (choose_times(led->ontime, &c1, &c2) < 0)
+ return -EINVAL;
+ if (choose_times(led->offtime, &c1, &c2) < 0)
+ return -EINVAL;
+
+ for (i = BANK0; i <= BANK1; i++) {
+ if (tca->bank[i].level_use == 0)
+ /* not in use - it is ours! */
+ break;
+ if (tca->bank[i].level != level)
+ /* Incompatible level - skip */
+ /* FIX: if timer matches we maybe should consider
+ * this anyway...
+ */
+ continue;
+
+ if (tca->bank[i].time_use == 0)
+ /* Timer not in use, and level matches - use it */
+ break;
+
+ if (!(tca->bank[i].on_dflt ||
+ led->on_dflt ||
+ tca->bank[i].ontime == led->ontime))
+ /* on time is incompatible */
+ continue;
+
+ if (!(tca->bank[i].off_dflt ||
+ led->off_dflt ||
+ tca->bank[i].offtime == led->offtime))
+ /* off time is incompatible */
+ continue;
+
+ /* looks like a suitable match */
+ break;
+ }
+
+ if (i > BANK1)
+ /* Nothing matches - how sad */
+ return -EINVAL;
+
+ b = &tca->bank[i];
+ if (b->level_use == 0)
+ set_level(tca, i, level);
+ b->level_use++;
+ led->bank = i;
+
+ if (b->on_dflt ||
+ !led->on_dflt ||
+ b->time_use == 0) {
+ b->ontime = led->ontime;
+ b->on_dflt = led->on_dflt;
+ need_init = 1;
+ }
+
+ if (b->off_dflt ||
+ !led->off_dflt ||
+ b->time_use == 0) {
+ b->offtime = led->offtime;
+ b->off_dflt = led->off_dflt;
+ need_init = 1;
+ }
+
+ if (need_init)
+ set_times(tca, i);
+
+ led->ontime = b->ontime;
+ led->offtime = b->offtime;
+
+ b->time_use++;
+ led->blink = 1;
+ led->led_cdev.brightness = TO_BRIGHT(b->level);
+ set_select(tca, led->num, blink_source[i]);
+ return 0;
+}
+
+static int led_assign(struct tca6507_led *led)
+{
+ struct tca6507_chip *tca = led->chip;
+ int err;
+ unsigned long flags;
+
+ spin_lock_irqsave(&tca->lock, flags);
+ led_release(led);
+ err = led_prepare(led);
+ if (err) {
+ /*
+ * Can only fail on timer setup. In that case we need
+ * to re-establish as steady level.
+ */
+ led->ontime = 0;
+ led->offtime = 0;
+ led_prepare(led);
+ }
+ spin_unlock_irqrestore(&tca->lock, flags);
+
+ if (tca->reg_set)
+ schedule_work(&tca->work);
+ return err;
+}
+
+static void tca6507_brightness_set(struct led_classdev *led_cdev,
+ enum led_brightness brightness)
+{
+ struct tca6507_led *led = container_of(led_cdev, struct tca6507_led,
+ led_cdev);
+ led->led_cdev.brightness = brightness;
+ led->ontime = 0;
+ led->offtime = 0;
+ led_assign(led);
+}
+
+static int tca6507_blink_set(struct led_classdev *led_cdev,
+ unsigned long *delay_on,
+ unsigned long *delay_off)
+{
+ struct tca6507_led *led = container_of(led_cdev, struct tca6507_led,
+ led_cdev);
+
+ if (*delay_on == 0)
+ led->on_dflt = 1;
+ else if (delay_on != &led_cdev->blink_delay_on)
+ led->on_dflt = 0;
+ led->ontime = *delay_on;
+
+ if (*delay_off == 0)
+ led->off_dflt = 1;
+ else if (delay_off != &led_cdev->blink_delay_off)
+ led->off_dflt = 0;
+ led->offtime = *delay_off;
+
+ if (led->ontime == 0)
+ led->ontime = 512;
+ if (led->offtime == 0)
+ led->offtime = 512;
+
+ if (led->led_cdev.brightness == LED_OFF)
+ led->led_cdev.brightness = LED_FULL;
+ if (led_assign(led) < 0) {
+ led->ontime = 0;
+ led->offtime = 0;
+ led->led_cdev.brightness = LED_OFF;
+ return -EINVAL;
+ }
+ *delay_on = led->ontime;
+ *delay_off = led->offtime;
+ return 0;
+}
+
+#ifdef CONFIG_GPIOLIB
+static void tca6507_gpio_set_value(struct gpio_chip *gc,
+ unsigned offset, int val)
+{
+ struct tca6507_chip *tca = container_of(gc, struct tca6507_chip, gpio);
+ unsigned long flags;
+
+ spin_lock_irqsave(&tca->lock, flags);
+ /*
+ * 'OFF' is floating high, and 'ON' is pulled down, so it has
+ * the inverse sense of 'val'.
+ */
+ set_select(tca, tca->gpio_map[offset],
+ val ? TCA6507_LS_LED_OFF : TCA6507_LS_LED_ON);
+ spin_unlock_irqrestore(&tca->lock, flags);
+ if (tca->reg_set)
+ schedule_work(&tca->work);
+}
+
+static int tca6507_gpio_direction_output(struct gpio_chip *gc,
+ unsigned offset, int val)
+{
+ tca6507_gpio_set_value(gc, offset, val);
+ return 0;
+}
+
+static int tca6507_probe_gpios(struct i2c_client *client,
+ struct tca6507_chip *tca,
+ struct tca6507_platform_data *pdata)
+{
+ int err;
+ int i = 0;
+ int gpios = 0;
+
+ for (i = 0; i < NUM_LEDS; i++)
+ if (pdata->leds.leds[i].name && pdata->leds.leds[i].flags) {
+ /* Configure as a gpio */
+ tca->gpio_name[gpios] = pdata->leds.leds[i].name;
+ tca->gpio_map[gpios] = i;
+ gpios++;
+ }
+
+ if (!gpios)
+ return 0;
+
+ tca->gpio.label = "gpio-tca6507";
+ tca->gpio.names = tca->gpio_name;
+ tca->gpio.ngpio = gpios;
+ tca->gpio.base = pdata->gpio_base;
+ tca->gpio.owner = THIS_MODULE;
+ tca->gpio.direction_output = tca6507_gpio_direction_output;
+ tca->gpio.set = tca6507_gpio_set_value;
+ tca->gpio.dev = &client->dev;
+#ifdef CONFIG_OF_GPIO
+ tca->gpio.of_node = of_node_get(client->dev.of_node);
+#endif
+ err = gpiochip_add(&tca->gpio);
+ if (err) {
+ tca->gpio.ngpio = 0;
+ return err;
+ }
+ if (pdata->setup)
+ pdata->setup(tca->gpio.base, tca->gpio.ngpio);
+ return 0;
+}
+
+static void tca6507_remove_gpio(struct tca6507_chip *tca)
+{
+ if (tca->gpio.ngpio)
+ gpiochip_remove(&tca->gpio);
+}
+#else /* CONFIG_GPIOLIB */
+static int tca6507_probe_gpios(struct i2c_client *client,
+ struct tca6507_chip *tca,
+ struct tca6507_platform_data *pdata)
+{
+ return 0;
+}
+static void tca6507_remove_gpio(struct tca6507_chip *tca)
+{
+}
+#endif /* CONFIG_GPIOLIB */
+
+#ifdef CONFIG_OF
+static struct tca6507_platform_data *
+tca6507_led_dt_init(struct i2c_client *client)
+{
+ struct device_node *np = client->dev.of_node, *child;
+ struct tca6507_platform_data *pdata;
+ struct led_info *tca_leds;
+ int count;
+
+ count = of_get_child_count(np);
+ if (!count || count > NUM_LEDS)
+ return ERR_PTR(-ENODEV);
+
+ tca_leds = devm_kzalloc(&client->dev,
+ sizeof(struct led_info) * NUM_LEDS, GFP_KERNEL);
+ if (!tca_leds)
+ return ERR_PTR(-ENOMEM);
+
+ for_each_child_of_node(np, child) {
+ struct led_info led;
+ u32 reg;
+ int ret;
+
+ led.name =
+ of_get_property(child, "label", NULL) ? : child->name;
+ led.default_trigger =
+ of_get_property(child, "linux,default-trigger", NULL);
+ led.flags = 0;
+ if (of_property_match_string(child, "compatible", "gpio") >= 0)
+ led.flags |= TCA6507_MAKE_GPIO;
+ ret = of_property_read_u32(child, "reg", &reg);
+ if (ret != 0 || reg < 0 || reg >= NUM_LEDS)
+ continue;
+
+ tca_leds[reg] = led;
+ }
+ pdata = devm_kzalloc(&client->dev,
+ sizeof(struct tca6507_platform_data), GFP_KERNEL);
+ if (!pdata)
+ return ERR_PTR(-ENOMEM);
+
+ pdata->leds.leds = tca_leds;
+ pdata->leds.num_leds = NUM_LEDS;
+#ifdef CONFIG_GPIOLIB
+ pdata->gpio_base = -1;
+#endif
+ return pdata;
+}
+
+static const struct of_device_id of_tca6507_leds_match[] = {
+ { .compatible = "ti,tca6507", },
+ {},
+};
+
+#else
+static struct tca6507_platform_data *
+tca6507_led_dt_init(struct i2c_client *client)
+{
+ return ERR_PTR(-ENODEV);
+}
+
+#endif
+
+static int tca6507_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct tca6507_chip *tca;
+ struct i2c_adapter *adapter;
+ struct tca6507_platform_data *pdata;
+ int err;
+ int i = 0;
+
+ adapter = to_i2c_adapter(client->dev.parent);
+ pdata = dev_get_platdata(&client->dev);
+
+ if (!i2c_check_functionality(adapter, I2C_FUNC_I2C))
+ return -EIO;
+
+ if (!pdata || pdata->leds.num_leds != NUM_LEDS) {
+ pdata = tca6507_led_dt_init(client);
+ if (IS_ERR(pdata)) {
+ dev_err(&client->dev, "Need %d entries in platform-data list\n",
+ NUM_LEDS);
+ return PTR_ERR(pdata);
+ }
+ }
+ tca = devm_kzalloc(&client->dev, sizeof(*tca), GFP_KERNEL);
+ if (!tca)
+ return -ENOMEM;
+
+ tca->client = client;
+ INIT_WORK(&tca->work, tca6507_work);
+ spin_lock_init(&tca->lock);
+ i2c_set_clientdata(client, tca);
+
+ for (i = 0; i < NUM_LEDS; i++) {
+ struct tca6507_led *l = tca->leds + i;
+
+ l->chip = tca;
+ l->num = i;
+ if (pdata->leds.leds[i].name && !pdata->leds.leds[i].flags) {
+ l->led_cdev.name = pdata->leds.leds[i].name;
+ l->led_cdev.default_trigger
+ = pdata->leds.leds[i].default_trigger;
+ l->led_cdev.brightness_set = tca6507_brightness_set;
+ l->led_cdev.blink_set = tca6507_blink_set;
+ l->bank = -1;
+ err = led_classdev_register(&client->dev,
+ &l->led_cdev);
+ if (err < 0)
+ goto exit;
+ }
+ }
+ err = tca6507_probe_gpios(client, tca, pdata);
+ if (err)
+ goto exit;
+ /* set all registers to known state - zero */
+ tca->reg_set = 0x7f;
+ schedule_work(&tca->work);
+
+ return 0;
+exit:
+ while (i--) {
+ if (tca->leds[i].led_cdev.name)
+ led_classdev_unregister(&tca->leds[i].led_cdev);
+ }
+ return err;
+}
+
+static int tca6507_remove(struct i2c_client *client)
+{
+ int i;
+ struct tca6507_chip *tca = i2c_get_clientdata(client);
+ struct tca6507_led *tca_leds = tca->leds;
+
+ for (i = 0; i < NUM_LEDS; i++) {
+ if (tca_leds[i].led_cdev.name)
+ led_classdev_unregister(&tca_leds[i].led_cdev);
+ }
+ tca6507_remove_gpio(tca);
+ cancel_work_sync(&tca->work);
+
+ return 0;
+}
+
+static struct i2c_driver tca6507_driver = {
+ .driver = {
+ .name = "leds-tca6507",
+ .owner = THIS_MODULE,
+ .of_match_table = of_match_ptr(of_tca6507_leds_match),
+ },
+ .probe = tca6507_probe,
+ .remove = tca6507_remove,
+ .id_table = tca6507_id,
+};
+
+module_i2c_driver(tca6507_driver);
+
+MODULE_AUTHOR("NeilBrown <neilb@suse.de>");
+MODULE_DESCRIPTION("TCA6507 LED/GPO driver");
+MODULE_LICENSE("GPL v2");
diff --git a/kernel/drivers/leds/leds-versatile.c b/kernel/drivers/leds/leds-versatile.c
new file mode 100644
index 000000000..80553022d
--- /dev/null
+++ b/kernel/drivers/leds/leds-versatile.c
@@ -0,0 +1,110 @@
+/*
+ * Driver for the 8 user LEDs found on the RealViews and Versatiles
+ * Based on DaVinci's DM365 board code
+ *
+ * License terms: GNU General Public License (GPL) version 2
+ * Author: Linus Walleij <triad@df.lth.se>
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/io.h>
+#include <linux/slab.h>
+#include <linux/leds.h>
+#include <linux/platform_device.h>
+
+struct versatile_led {
+ void __iomem *base;
+ struct led_classdev cdev;
+ u8 mask;
+};
+
+/*
+ * The triggers lines up below will only be used if the
+ * LED triggers are compiled in.
+ */
+static const struct {
+ const char *name;
+ const char *trigger;
+} versatile_leds[] = {
+ { "versatile:0", "heartbeat", },
+ { "versatile:1", "mmc0", },
+ { "versatile:2", "cpu0" },
+ { "versatile:3", "cpu1" },
+ { "versatile:4", "cpu2" },
+ { "versatile:5", "cpu3" },
+ { "versatile:6", },
+ { "versatile:7", },
+};
+
+static void versatile_led_set(struct led_classdev *cdev,
+ enum led_brightness b)
+{
+ struct versatile_led *led = container_of(cdev,
+ struct versatile_led, cdev);
+ u32 reg = readl(led->base);
+
+ if (b != LED_OFF)
+ reg |= led->mask;
+ else
+ reg &= ~led->mask;
+ writel(reg, led->base);
+}
+
+static enum led_brightness versatile_led_get(struct led_classdev *cdev)
+{
+ struct versatile_led *led = container_of(cdev,
+ struct versatile_led, cdev);
+ u32 reg = readl(led->base);
+
+ return (reg & led->mask) ? LED_FULL : LED_OFF;
+}
+
+static int versatile_leds_probe(struct platform_device *dev)
+{
+ int i;
+ struct resource *res;
+ void __iomem *base;
+
+ res = platform_get_resource(dev, IORESOURCE_MEM, 0);
+ base = devm_ioremap_resource(&dev->dev, res);
+ if (IS_ERR(base))
+ return PTR_ERR(base);
+
+ /* All off */
+ writel(0, base);
+ for (i = 0; i < ARRAY_SIZE(versatile_leds); i++) {
+ struct versatile_led *led;
+
+ led = kzalloc(sizeof(*led), GFP_KERNEL);
+ if (!led)
+ break;
+
+ led->base = base;
+ led->cdev.name = versatile_leds[i].name;
+ led->cdev.brightness_set = versatile_led_set;
+ led->cdev.brightness_get = versatile_led_get;
+ led->cdev.default_trigger = versatile_leds[i].trigger;
+ led->mask = BIT(i);
+
+ if (led_classdev_register(NULL, &led->cdev) < 0) {
+ kfree(led);
+ break;
+ }
+ }
+
+ return 0;
+}
+
+static struct platform_driver versatile_leds_driver = {
+ .driver = {
+ .name = "versatile-leds",
+ },
+ .probe = versatile_leds_probe,
+};
+
+module_platform_driver(versatile_leds_driver);
+
+MODULE_AUTHOR("Linus Walleij <linus.walleij@linaro.org>");
+MODULE_DESCRIPTION("ARM Versatile LED driver");
+MODULE_LICENSE("GPL v2");
diff --git a/kernel/drivers/leds/leds-wm831x-status.c b/kernel/drivers/leds/leds-wm831x-status.c
new file mode 100644
index 000000000..56027ef7c
--- /dev/null
+++ b/kernel/drivers/leds/leds-wm831x-status.c
@@ -0,0 +1,325 @@
+/*
+ * LED driver for WM831x status LEDs
+ *
+ * Copyright(C) 2009 Wolfson Microelectronics PLC.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/leds.h>
+#include <linux/err.h>
+#include <linux/mfd/wm831x/core.h>
+#include <linux/mfd/wm831x/pdata.h>
+#include <linux/mfd/wm831x/status.h>
+#include <linux/module.h>
+
+
+struct wm831x_status {
+ struct led_classdev cdev;
+ struct wm831x *wm831x;
+ struct work_struct work;
+ struct mutex mutex;
+
+ spinlock_t value_lock;
+ int reg; /* Control register */
+ int reg_val; /* Control register value */
+
+ int blink;
+ int blink_time;
+ int blink_cyc;
+ int src;
+ enum led_brightness brightness;
+};
+
+#define to_wm831x_status(led_cdev) \
+ container_of(led_cdev, struct wm831x_status, cdev)
+
+static void wm831x_status_work(struct work_struct *work)
+{
+ struct wm831x_status *led = container_of(work, struct wm831x_status,
+ work);
+ unsigned long flags;
+
+ mutex_lock(&led->mutex);
+
+ led->reg_val &= ~(WM831X_LED_SRC_MASK | WM831X_LED_MODE_MASK |
+ WM831X_LED_DUTY_CYC_MASK | WM831X_LED_DUR_MASK);
+
+ spin_lock_irqsave(&led->value_lock, flags);
+
+ led->reg_val |= led->src << WM831X_LED_SRC_SHIFT;
+ if (led->blink) {
+ led->reg_val |= 2 << WM831X_LED_MODE_SHIFT;
+ led->reg_val |= led->blink_time << WM831X_LED_DUR_SHIFT;
+ led->reg_val |= led->blink_cyc;
+ } else {
+ if (led->brightness != LED_OFF)
+ led->reg_val |= 1 << WM831X_LED_MODE_SHIFT;
+ }
+
+ spin_unlock_irqrestore(&led->value_lock, flags);
+
+ wm831x_reg_write(led->wm831x, led->reg, led->reg_val);
+
+ mutex_unlock(&led->mutex);
+}
+
+static void wm831x_status_set(struct led_classdev *led_cdev,
+ enum led_brightness value)
+{
+ struct wm831x_status *led = to_wm831x_status(led_cdev);
+ unsigned long flags;
+
+ spin_lock_irqsave(&led->value_lock, flags);
+ led->brightness = value;
+ if (value == LED_OFF)
+ led->blink = 0;
+ schedule_work(&led->work);
+ spin_unlock_irqrestore(&led->value_lock, flags);
+}
+
+static int wm831x_status_blink_set(struct led_classdev *led_cdev,
+ unsigned long *delay_on,
+ unsigned long *delay_off)
+{
+ struct wm831x_status *led = to_wm831x_status(led_cdev);
+ unsigned long flags;
+ int ret = 0;
+
+ /* Pick some defaults if we've not been given times */
+ if (*delay_on == 0 && *delay_off == 0) {
+ *delay_on = 250;
+ *delay_off = 250;
+ }
+
+ spin_lock_irqsave(&led->value_lock, flags);
+
+ /* We only have a limited selection of settings, see if we can
+ * support the configuration we're being given */
+ switch (*delay_on) {
+ case 1000:
+ led->blink_time = 0;
+ break;
+ case 250:
+ led->blink_time = 1;
+ break;
+ case 125:
+ led->blink_time = 2;
+ break;
+ case 62:
+ case 63:
+ /* Actually 62.5ms */
+ led->blink_time = 3;
+ break;
+ default:
+ ret = -EINVAL;
+ break;
+ }
+
+ if (ret == 0) {
+ switch (*delay_off / *delay_on) {
+ case 1:
+ led->blink_cyc = 0;
+ break;
+ case 3:
+ led->blink_cyc = 1;
+ break;
+ case 4:
+ led->blink_cyc = 2;
+ break;
+ case 8:
+ led->blink_cyc = 3;
+ break;
+ default:
+ ret = -EINVAL;
+ break;
+ }
+ }
+
+ if (ret == 0)
+ led->blink = 1;
+ else
+ led->blink = 0;
+
+ /* Always update; if we fail turn off blinking since we expect
+ * a software fallback. */
+ schedule_work(&led->work);
+
+ spin_unlock_irqrestore(&led->value_lock, flags);
+
+ return ret;
+}
+
+static const char * const led_src_texts[] = {
+ "otp",
+ "power",
+ "charger",
+ "soft",
+};
+
+static ssize_t wm831x_status_src_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct led_classdev *led_cdev = dev_get_drvdata(dev);
+ struct wm831x_status *led = to_wm831x_status(led_cdev);
+ int i;
+ ssize_t ret = 0;
+
+ mutex_lock(&led->mutex);
+
+ for (i = 0; i < ARRAY_SIZE(led_src_texts); i++)
+ if (i == led->src)
+ ret += sprintf(&buf[ret], "[%s] ", led_src_texts[i]);
+ else
+ ret += sprintf(&buf[ret], "%s ", led_src_texts[i]);
+
+ mutex_unlock(&led->mutex);
+
+ ret += sprintf(&buf[ret], "\n");
+
+ return ret;
+}
+
+static ssize_t wm831x_status_src_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t size)
+{
+ struct led_classdev *led_cdev = dev_get_drvdata(dev);
+ struct wm831x_status *led = to_wm831x_status(led_cdev);
+ char name[20];
+ int i;
+ size_t len;
+
+ name[sizeof(name) - 1] = '\0';
+ strncpy(name, buf, sizeof(name) - 1);
+ len = strlen(name);
+
+ if (len && name[len - 1] == '\n')
+ name[len - 1] = '\0';
+
+ for (i = 0; i < ARRAY_SIZE(led_src_texts); i++) {
+ if (!strcmp(name, led_src_texts[i])) {
+ mutex_lock(&led->mutex);
+
+ led->src = i;
+ schedule_work(&led->work);
+
+ mutex_unlock(&led->mutex);
+ }
+ }
+
+ return size;
+}
+
+static DEVICE_ATTR(src, 0644, wm831x_status_src_show, wm831x_status_src_store);
+
+static struct attribute *wm831x_status_attrs[] = {
+ &dev_attr_src.attr,
+ NULL
+};
+ATTRIBUTE_GROUPS(wm831x_status);
+
+static int wm831x_status_probe(struct platform_device *pdev)
+{
+ struct wm831x *wm831x = dev_get_drvdata(pdev->dev.parent);
+ struct wm831x_pdata *chip_pdata;
+ struct wm831x_status_pdata pdata;
+ struct wm831x_status *drvdata;
+ struct resource *res;
+ int id = pdev->id % ARRAY_SIZE(chip_pdata->status);
+ int ret;
+
+ res = platform_get_resource(pdev, IORESOURCE_REG, 0);
+ if (res == NULL) {
+ dev_err(&pdev->dev, "No register resource\n");
+ return -EINVAL;
+ }
+
+ drvdata = devm_kzalloc(&pdev->dev, sizeof(struct wm831x_status),
+ GFP_KERNEL);
+ if (!drvdata)
+ return -ENOMEM;
+ platform_set_drvdata(pdev, drvdata);
+
+ drvdata->wm831x = wm831x;
+ drvdata->reg = res->start;
+
+ if (dev_get_platdata(wm831x->dev))
+ chip_pdata = dev_get_platdata(wm831x->dev);
+ else
+ chip_pdata = NULL;
+
+ memset(&pdata, 0, sizeof(pdata));
+ if (chip_pdata && chip_pdata->status[id])
+ memcpy(&pdata, chip_pdata->status[id], sizeof(pdata));
+ else
+ pdata.name = dev_name(&pdev->dev);
+
+ mutex_init(&drvdata->mutex);
+ INIT_WORK(&drvdata->work, wm831x_status_work);
+ spin_lock_init(&drvdata->value_lock);
+
+ /* We cache the configuration register and read startup values
+ * from it. */
+ drvdata->reg_val = wm831x_reg_read(wm831x, drvdata->reg);
+
+ if (drvdata->reg_val & WM831X_LED_MODE_MASK)
+ drvdata->brightness = LED_FULL;
+ else
+ drvdata->brightness = LED_OFF;
+
+ /* Set a default source if configured, otherwise leave the
+ * current hardware setting.
+ */
+ if (pdata.default_src == WM831X_STATUS_PRESERVE) {
+ drvdata->src = drvdata->reg_val;
+ drvdata->src &= WM831X_LED_SRC_MASK;
+ drvdata->src >>= WM831X_LED_SRC_SHIFT;
+ } else {
+ drvdata->src = pdata.default_src - 1;
+ }
+
+ drvdata->cdev.name = pdata.name;
+ drvdata->cdev.default_trigger = pdata.default_trigger;
+ drvdata->cdev.brightness_set = wm831x_status_set;
+ drvdata->cdev.blink_set = wm831x_status_blink_set;
+ drvdata->cdev.groups = wm831x_status_groups;
+
+ ret = led_classdev_register(wm831x->dev, &drvdata->cdev);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "Failed to register LED: %d\n", ret);
+ return ret;
+ }
+
+ return 0;
+}
+
+static int wm831x_status_remove(struct platform_device *pdev)
+{
+ struct wm831x_status *drvdata = platform_get_drvdata(pdev);
+
+ led_classdev_unregister(&drvdata->cdev);
+
+ return 0;
+}
+
+static struct platform_driver wm831x_status_driver = {
+ .driver = {
+ .name = "wm831x-status",
+ },
+ .probe = wm831x_status_probe,
+ .remove = wm831x_status_remove,
+};
+
+module_platform_driver(wm831x_status_driver);
+
+MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>");
+MODULE_DESCRIPTION("WM831x status LED driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:wm831x-status");
diff --git a/kernel/drivers/leds/leds-wm8350.c b/kernel/drivers/leds/leds-wm8350.c
new file mode 100644
index 000000000..0d1218356
--- /dev/null
+++ b/kernel/drivers/leds/leds-wm8350.c
@@ -0,0 +1,286 @@
+/*
+ * LED driver for WM8350 driven LEDS.
+ *
+ * Copyright(C) 2007, 2008 Wolfson Microelectronics PLC.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/leds.h>
+#include <linux/err.h>
+#include <linux/mfd/wm8350/pmic.h>
+#include <linux/regulator/consumer.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+
+/* Microamps */
+static const int isink_cur[] = {
+ 4,
+ 5,
+ 6,
+ 7,
+ 8,
+ 10,
+ 11,
+ 14,
+ 16,
+ 19,
+ 23,
+ 27,
+ 32,
+ 39,
+ 46,
+ 54,
+ 65,
+ 77,
+ 92,
+ 109,
+ 130,
+ 154,
+ 183,
+ 218,
+ 259,
+ 308,
+ 367,
+ 436,
+ 518,
+ 616,
+ 733,
+ 872,
+ 1037,
+ 1233,
+ 1466,
+ 1744,
+ 2073,
+ 2466,
+ 2933,
+ 3487,
+ 4147,
+ 4932,
+ 5865,
+ 6975,
+ 8294,
+ 9864,
+ 11730,
+ 13949,
+ 16589,
+ 19728,
+ 23460,
+ 27899,
+ 33178,
+ 39455,
+ 46920,
+ 55798,
+ 66355,
+ 78910,
+ 93840,
+ 111596,
+ 132710,
+ 157820,
+ 187681,
+ 223191
+};
+
+#define to_wm8350_led(led_cdev) \
+ container_of(led_cdev, struct wm8350_led, cdev)
+
+static void wm8350_led_enable(struct wm8350_led *led)
+{
+ int ret;
+
+ if (led->enabled)
+ return;
+
+ ret = regulator_enable(led->isink);
+ if (ret != 0) {
+ dev_err(led->cdev.dev, "Failed to enable ISINK: %d\n", ret);
+ return;
+ }
+
+ ret = regulator_enable(led->dcdc);
+ if (ret != 0) {
+ dev_err(led->cdev.dev, "Failed to enable DCDC: %d\n", ret);
+ regulator_disable(led->isink);
+ return;
+ }
+
+ led->enabled = 1;
+}
+
+static void wm8350_led_disable(struct wm8350_led *led)
+{
+ int ret;
+
+ if (!led->enabled)
+ return;
+
+ ret = regulator_disable(led->dcdc);
+ if (ret != 0) {
+ dev_err(led->cdev.dev, "Failed to disable DCDC: %d\n", ret);
+ return;
+ }
+
+ ret = regulator_disable(led->isink);
+ if (ret != 0) {
+ dev_err(led->cdev.dev, "Failed to disable ISINK: %d\n", ret);
+ ret = regulator_enable(led->dcdc);
+ if (ret != 0)
+ dev_err(led->cdev.dev, "Failed to reenable DCDC: %d\n",
+ ret);
+ return;
+ }
+
+ led->enabled = 0;
+}
+
+static void led_work(struct work_struct *work)
+{
+ struct wm8350_led *led = container_of(work, struct wm8350_led, work);
+ int ret;
+ int uA;
+ unsigned long flags;
+
+ mutex_lock(&led->mutex);
+
+ spin_lock_irqsave(&led->value_lock, flags);
+
+ if (led->value == LED_OFF) {
+ spin_unlock_irqrestore(&led->value_lock, flags);
+ wm8350_led_disable(led);
+ goto out;
+ }
+
+ /* This scales linearly into the index of valid current
+ * settings which results in a linear scaling of perceived
+ * brightness due to the non-linear current settings provided
+ * by the hardware.
+ */
+ uA = (led->max_uA_index * led->value) / LED_FULL;
+ spin_unlock_irqrestore(&led->value_lock, flags);
+ BUG_ON(uA >= ARRAY_SIZE(isink_cur));
+
+ ret = regulator_set_current_limit(led->isink, isink_cur[uA],
+ isink_cur[uA]);
+ if (ret != 0)
+ dev_err(led->cdev.dev, "Failed to set %duA: %d\n",
+ isink_cur[uA], ret);
+
+ wm8350_led_enable(led);
+
+out:
+ mutex_unlock(&led->mutex);
+}
+
+static void wm8350_led_set(struct led_classdev *led_cdev,
+ enum led_brightness value)
+{
+ struct wm8350_led *led = to_wm8350_led(led_cdev);
+ unsigned long flags;
+
+ spin_lock_irqsave(&led->value_lock, flags);
+ led->value = value;
+ schedule_work(&led->work);
+ spin_unlock_irqrestore(&led->value_lock, flags);
+}
+
+static void wm8350_led_shutdown(struct platform_device *pdev)
+{
+ struct wm8350_led *led = platform_get_drvdata(pdev);
+
+ mutex_lock(&led->mutex);
+ led->value = LED_OFF;
+ wm8350_led_disable(led);
+ mutex_unlock(&led->mutex);
+}
+
+static int wm8350_led_probe(struct platform_device *pdev)
+{
+ struct regulator *isink, *dcdc;
+ struct wm8350_led *led;
+ struct wm8350_led_platform_data *pdata = dev_get_platdata(&pdev->dev);
+ int i;
+
+ if (pdata == NULL) {
+ dev_err(&pdev->dev, "no platform data\n");
+ return -ENODEV;
+ }
+
+ if (pdata->max_uA < isink_cur[0]) {
+ dev_err(&pdev->dev, "Invalid maximum current %duA\n",
+ pdata->max_uA);
+ return -EINVAL;
+ }
+
+ isink = devm_regulator_get(&pdev->dev, "led_isink");
+ if (IS_ERR(isink)) {
+ dev_err(&pdev->dev, "%s: can't get ISINK\n", __func__);
+ return PTR_ERR(isink);
+ }
+
+ dcdc = devm_regulator_get(&pdev->dev, "led_vcc");
+ if (IS_ERR(dcdc)) {
+ dev_err(&pdev->dev, "%s: can't get DCDC\n", __func__);
+ return PTR_ERR(dcdc);
+ }
+
+ led = devm_kzalloc(&pdev->dev, sizeof(*led), GFP_KERNEL);
+ if (led == NULL)
+ return -ENOMEM;
+
+ led->cdev.brightness_set = wm8350_led_set;
+ led->cdev.default_trigger = pdata->default_trigger;
+ led->cdev.name = pdata->name;
+ led->cdev.flags |= LED_CORE_SUSPENDRESUME;
+ led->enabled = regulator_is_enabled(isink);
+ led->isink = isink;
+ led->dcdc = dcdc;
+
+ for (i = 0; i < ARRAY_SIZE(isink_cur) - 1; i++)
+ if (isink_cur[i] >= pdata->max_uA)
+ break;
+ led->max_uA_index = i;
+ if (pdata->max_uA != isink_cur[i])
+ dev_warn(&pdev->dev,
+ "Maximum current %duA is not directly supported,"
+ " check platform data\n",
+ pdata->max_uA);
+
+ spin_lock_init(&led->value_lock);
+ mutex_init(&led->mutex);
+ INIT_WORK(&led->work, led_work);
+ led->value = LED_OFF;
+ platform_set_drvdata(pdev, led);
+
+ return led_classdev_register(&pdev->dev, &led->cdev);
+}
+
+static int wm8350_led_remove(struct platform_device *pdev)
+{
+ struct wm8350_led *led = platform_get_drvdata(pdev);
+
+ led_classdev_unregister(&led->cdev);
+ flush_work(&led->work);
+ wm8350_led_disable(led);
+ return 0;
+}
+
+static struct platform_driver wm8350_led_driver = {
+ .driver = {
+ .name = "wm8350-led",
+ },
+ .probe = wm8350_led_probe,
+ .remove = wm8350_led_remove,
+ .shutdown = wm8350_led_shutdown,
+};
+
+module_platform_driver(wm8350_led_driver);
+
+MODULE_AUTHOR("Mark Brown");
+MODULE_DESCRIPTION("WM8350 LED driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:wm8350-led");
diff --git a/kernel/drivers/leds/leds-wrap.c b/kernel/drivers/leds/leds-wrap.c
new file mode 100644
index 000000000..1ba3defdd
--- /dev/null
+++ b/kernel/drivers/leds/leds-wrap.c
@@ -0,0 +1,153 @@
+/*
+ * LEDs driver for PCEngines WRAP
+ *
+ * Copyright (C) 2006 Kristian Kielhofner <kris@krisk.org>
+ *
+ * Based on leds-net48xx.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/leds.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/scx200_gpio.h>
+#include <linux/module.h>
+
+#define DRVNAME "wrap-led"
+#define WRAP_POWER_LED_GPIO 2
+#define WRAP_ERROR_LED_GPIO 3
+#define WRAP_EXTRA_LED_GPIO 18
+
+static struct platform_device *pdev;
+
+static void wrap_power_led_set(struct led_classdev *led_cdev,
+ enum led_brightness value)
+{
+ if (value)
+ scx200_gpio_set_low(WRAP_POWER_LED_GPIO);
+ else
+ scx200_gpio_set_high(WRAP_POWER_LED_GPIO);
+}
+
+static void wrap_error_led_set(struct led_classdev *led_cdev,
+ enum led_brightness value)
+{
+ if (value)
+ scx200_gpio_set_low(WRAP_ERROR_LED_GPIO);
+ else
+ scx200_gpio_set_high(WRAP_ERROR_LED_GPIO);
+}
+
+static void wrap_extra_led_set(struct led_classdev *led_cdev,
+ enum led_brightness value)
+{
+ if (value)
+ scx200_gpio_set_low(WRAP_EXTRA_LED_GPIO);
+ else
+ scx200_gpio_set_high(WRAP_EXTRA_LED_GPIO);
+}
+
+static struct led_classdev wrap_power_led = {
+ .name = "wrap::power",
+ .brightness_set = wrap_power_led_set,
+ .default_trigger = "default-on",
+ .flags = LED_CORE_SUSPENDRESUME,
+};
+
+static struct led_classdev wrap_error_led = {
+ .name = "wrap::error",
+ .brightness_set = wrap_error_led_set,
+ .flags = LED_CORE_SUSPENDRESUME,
+};
+
+static struct led_classdev wrap_extra_led = {
+ .name = "wrap::extra",
+ .brightness_set = wrap_extra_led_set,
+ .flags = LED_CORE_SUSPENDRESUME,
+};
+
+static int wrap_led_probe(struct platform_device *pdev)
+{
+ int ret;
+
+ ret = led_classdev_register(&pdev->dev, &wrap_power_led);
+ if (ret < 0)
+ return ret;
+
+ ret = led_classdev_register(&pdev->dev, &wrap_error_led);
+ if (ret < 0)
+ goto err1;
+
+ ret = led_classdev_register(&pdev->dev, &wrap_extra_led);
+ if (ret < 0)
+ goto err2;
+
+ return ret;
+
+err2:
+ led_classdev_unregister(&wrap_error_led);
+err1:
+ led_classdev_unregister(&wrap_power_led);
+
+ return ret;
+}
+
+static int wrap_led_remove(struct platform_device *pdev)
+{
+ led_classdev_unregister(&wrap_power_led);
+ led_classdev_unregister(&wrap_error_led);
+ led_classdev_unregister(&wrap_extra_led);
+ return 0;
+}
+
+static struct platform_driver wrap_led_driver = {
+ .probe = wrap_led_probe,
+ .remove = wrap_led_remove,
+ .driver = {
+ .name = DRVNAME,
+ },
+};
+
+static int __init wrap_led_init(void)
+{
+ int ret;
+
+ if (!scx200_gpio_present()) {
+ ret = -ENODEV;
+ goto out;
+ }
+
+ ret = platform_driver_register(&wrap_led_driver);
+ if (ret < 0)
+ goto out;
+
+ pdev = platform_device_register_simple(DRVNAME, -1, NULL, 0);
+ if (IS_ERR(pdev)) {
+ ret = PTR_ERR(pdev);
+ platform_driver_unregister(&wrap_led_driver);
+ goto out;
+ }
+
+out:
+ return ret;
+}
+
+static void __exit wrap_led_exit(void)
+{
+ platform_device_unregister(pdev);
+ platform_driver_unregister(&wrap_led_driver);
+}
+
+module_init(wrap_led_init);
+module_exit(wrap_led_exit);
+
+MODULE_AUTHOR("Kristian Kielhofner <kris@krisk.org>");
+MODULE_DESCRIPTION("PCEngines WRAP LED driver");
+MODULE_LICENSE("GPL");
+
diff --git a/kernel/drivers/leds/leds.h b/kernel/drivers/leds/leds.h
new file mode 100644
index 000000000..79efe57c7
--- /dev/null
+++ b/kernel/drivers/leds/leds.h
@@ -0,0 +1,76 @@
+/*
+ * LED Core
+ *
+ * Copyright 2005 Openedhand Ltd.
+ *
+ * Author: Richard Purdie <rpurdie@openedhand.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+#ifndef __LEDS_H_INCLUDED
+#define __LEDS_H_INCLUDED
+
+#include <linux/device.h>
+#include <linux/rwsem.h>
+#include <linux/leds.h>
+
+static inline void led_set_brightness_async(struct led_classdev *led_cdev,
+ enum led_brightness value)
+{
+ value = min(value, led_cdev->max_brightness);
+ led_cdev->brightness = value;
+
+ if (!(led_cdev->flags & LED_SUSPENDED))
+ led_cdev->brightness_set(led_cdev, value);
+}
+
+static inline int led_set_brightness_sync(struct led_classdev *led_cdev,
+ enum led_brightness value)
+{
+ int ret = 0;
+
+ led_cdev->brightness = min(value, led_cdev->max_brightness);
+
+ if (!(led_cdev->flags & LED_SUSPENDED))
+ ret = led_cdev->brightness_set_sync(led_cdev,
+ led_cdev->brightness);
+ return ret;
+}
+
+static inline int led_get_brightness(struct led_classdev *led_cdev)
+{
+ return led_cdev->brightness;
+}
+
+void led_stop_software_blink(struct led_classdev *led_cdev);
+
+extern struct rw_semaphore leds_list_lock;
+extern struct list_head leds_list;
+
+#ifdef CONFIG_LEDS_TRIGGERS
+void led_trigger_set_default(struct led_classdev *led_cdev);
+void led_trigger_set(struct led_classdev *led_cdev,
+ struct led_trigger *trigger);
+void led_trigger_remove(struct led_classdev *led_cdev);
+
+static inline void *led_get_trigger_data(struct led_classdev *led_cdev)
+{
+ return led_cdev->trigger_data;
+}
+
+#else
+#define led_trigger_set_default(x) do {} while (0)
+#define led_trigger_set(x, y) do {} while (0)
+#define led_trigger_remove(x) do {} while (0)
+#define led_get_trigger_data(x) (NULL)
+#endif
+
+ssize_t led_trigger_store(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count);
+ssize_t led_trigger_show(struct device *dev, struct device_attribute *attr,
+ char *buf);
+
+#endif /* __LEDS_H_INCLUDED */
diff --git a/kernel/drivers/leds/trigger/Kconfig b/kernel/drivers/leds/trigger/Kconfig
new file mode 100644
index 000000000..3d7245d6b
--- /dev/null
+++ b/kernel/drivers/leds/trigger/Kconfig
@@ -0,0 +1,111 @@
+menuconfig LEDS_TRIGGERS
+ bool "LED Trigger support"
+ depends on LEDS_CLASS
+ help
+ This option enables trigger support for the leds class.
+ These triggers allow kernel events to drive the LEDs and can
+ be configured via sysfs. If unsure, say Y.
+
+if LEDS_TRIGGERS
+
+config LEDS_TRIGGER_TIMER
+ tristate "LED Timer Trigger"
+ depends on LEDS_TRIGGERS
+ help
+ This allows LEDs to be controlled by a programmable timer
+ via sysfs. Some LED hardware can be programmed to start
+ blinking the LED without any further software interaction.
+ For more details read Documentation/leds/leds-class.txt.
+
+ If unsure, say Y.
+
+config LEDS_TRIGGER_ONESHOT
+ tristate "LED One-shot Trigger"
+ depends on LEDS_TRIGGERS
+ help
+ This allows LEDs to blink in one-shot pulses with parameters
+ controlled via sysfs. It's useful to notify the user on
+ sporadic events, when there are no clear begin and end trap points,
+ or on dense events, where this blinks the LED at constant rate if
+ rearmed continuously.
+
+ It also shows how to use the led_blink_set_oneshot() function.
+
+ If unsure, say Y.
+
+config LEDS_TRIGGER_IDE_DISK
+ bool "LED IDE Disk Trigger"
+ depends on IDE_GD_ATA
+ depends on LEDS_TRIGGERS
+ help
+ This allows LEDs to be controlled by IDE disk activity.
+ If unsure, say Y.
+
+config LEDS_TRIGGER_HEARTBEAT
+ tristate "LED Heartbeat Trigger"
+ depends on LEDS_TRIGGERS
+ help
+ This allows LEDs to be controlled by a CPU load average.
+ The flash frequency is a hyperbolic function of the 1-minute
+ load average.
+ If unsure, say Y.
+
+config LEDS_TRIGGER_BACKLIGHT
+ tristate "LED backlight Trigger"
+ depends on LEDS_TRIGGERS
+ help
+ This allows LEDs to be controlled as a backlight device: they
+ turn off and on when the display is blanked and unblanked.
+
+ If unsure, say N.
+
+config LEDS_TRIGGER_CPU
+ bool "LED CPU Trigger"
+ depends on LEDS_TRIGGERS && !PREEMPT_RT_BASE
+ help
+ This allows LEDs to be controlled by active CPUs. This shows
+ the active CPUs across an array of LEDs so you can see which
+ CPUs are active on the system at any given moment.
+
+ If unsure, say N.
+
+config LEDS_TRIGGER_GPIO
+ tristate "LED GPIO Trigger"
+ depends on LEDS_TRIGGERS
+ depends on GPIOLIB
+ help
+ This allows LEDs to be controlled by gpio events. It's good
+ when using gpios as switches and triggering the needed LEDs
+ from there. One use case is n810's keypad LEDs that could
+ be triggered by this trigger when user slides up to show
+ keypad.
+
+ If unsure, say N.
+
+config LEDS_TRIGGER_DEFAULT_ON
+ tristate "LED Default ON Trigger"
+ depends on LEDS_TRIGGERS
+ help
+ This allows LEDs to be initialised in the ON state.
+ If unsure, say Y.
+
+comment "iptables trigger is under Netfilter config (LED target)"
+ depends on LEDS_TRIGGERS
+
+config LEDS_TRIGGER_TRANSIENT
+ tristate "LED Transient Trigger"
+ depends on LEDS_TRIGGERS
+ help
+ This allows one time activation of a transient state on
+ GPIO/PWM based hardware.
+ If unsure, say Y.
+
+config LEDS_TRIGGER_CAMERA
+ tristate "LED Camera Flash/Torch Trigger"
+ depends on LEDS_TRIGGERS
+ help
+ This allows LEDs to be controlled as a camera flash/torch device.
+ This enables direct flash/torch on/off by the driver, kernel space.
+ If unsure, say Y.
+
+endif # LEDS_TRIGGERS
diff --git a/kernel/drivers/leds/trigger/Makefile b/kernel/drivers/leds/trigger/Makefile
new file mode 100644
index 000000000..1abf48dac
--- /dev/null
+++ b/kernel/drivers/leds/trigger/Makefile
@@ -0,0 +1,10 @@
+obj-$(CONFIG_LEDS_TRIGGER_TIMER) += ledtrig-timer.o
+obj-$(CONFIG_LEDS_TRIGGER_ONESHOT) += ledtrig-oneshot.o
+obj-$(CONFIG_LEDS_TRIGGER_IDE_DISK) += ledtrig-ide-disk.o
+obj-$(CONFIG_LEDS_TRIGGER_HEARTBEAT) += ledtrig-heartbeat.o
+obj-$(CONFIG_LEDS_TRIGGER_BACKLIGHT) += ledtrig-backlight.o
+obj-$(CONFIG_LEDS_TRIGGER_GPIO) += ledtrig-gpio.o
+obj-$(CONFIG_LEDS_TRIGGER_CPU) += ledtrig-cpu.o
+obj-$(CONFIG_LEDS_TRIGGER_DEFAULT_ON) += ledtrig-default-on.o
+obj-$(CONFIG_LEDS_TRIGGER_TRANSIENT) += ledtrig-transient.o
+obj-$(CONFIG_LEDS_TRIGGER_CAMERA) += ledtrig-camera.o
diff --git a/kernel/drivers/leds/trigger/ledtrig-backlight.c b/kernel/drivers/leds/trigger/ledtrig-backlight.c
new file mode 100644
index 000000000..59eca17d9
--- /dev/null
+++ b/kernel/drivers/leds/trigger/ledtrig-backlight.c
@@ -0,0 +1,168 @@
+/*
+ * Backlight emulation LED trigger
+ *
+ * Copyright 2008 (C) Rodolfo Giometti <giometti@linux.it>
+ * Copyright 2008 (C) Eurotech S.p.A. <info@eurotech.it>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/init.h>
+#include <linux/fb.h>
+#include <linux/leds.h>
+#include "../leds.h"
+
+#define BLANK 1
+#define UNBLANK 0
+
+struct bl_trig_notifier {
+ struct led_classdev *led;
+ int brightness;
+ int old_status;
+ struct notifier_block notifier;
+ unsigned invert;
+};
+
+static int fb_notifier_callback(struct notifier_block *p,
+ unsigned long event, void *data)
+{
+ struct bl_trig_notifier *n = container_of(p,
+ struct bl_trig_notifier, notifier);
+ struct led_classdev *led = n->led;
+ struct fb_event *fb_event = data;
+ int *blank;
+ int new_status;
+
+ /* If we aren't interested in this event, skip it immediately ... */
+ if (event != FB_EVENT_BLANK)
+ return 0;
+
+ blank = fb_event->data;
+ new_status = *blank ? BLANK : UNBLANK;
+
+ if (new_status == n->old_status)
+ return 0;
+
+ if ((n->old_status == UNBLANK) ^ n->invert) {
+ n->brightness = led->brightness;
+ led_set_brightness_async(led, LED_OFF);
+ } else {
+ led_set_brightness_async(led, n->brightness);
+ }
+
+ n->old_status = new_status;
+
+ return 0;
+}
+
+static ssize_t bl_trig_invert_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct led_classdev *led = dev_get_drvdata(dev);
+ struct bl_trig_notifier *n = led->trigger_data;
+
+ return sprintf(buf, "%u\n", n->invert);
+}
+
+static ssize_t bl_trig_invert_store(struct device *dev,
+ struct device_attribute *attr, const char *buf, size_t num)
+{
+ struct led_classdev *led = dev_get_drvdata(dev);
+ struct bl_trig_notifier *n = led->trigger_data;
+ unsigned long invert;
+ int ret;
+
+ ret = kstrtoul(buf, 10, &invert);
+ if (ret < 0)
+ return ret;
+
+ if (invert > 1)
+ return -EINVAL;
+
+ n->invert = invert;
+
+ /* After inverting, we need to update the LED. */
+ if ((n->old_status == BLANK) ^ n->invert)
+ led_set_brightness_async(led, LED_OFF);
+ else
+ led_set_brightness_async(led, n->brightness);
+
+ return num;
+}
+static DEVICE_ATTR(inverted, 0644, bl_trig_invert_show, bl_trig_invert_store);
+
+static void bl_trig_activate(struct led_classdev *led)
+{
+ int ret;
+
+ struct bl_trig_notifier *n;
+
+ n = kzalloc(sizeof(struct bl_trig_notifier), GFP_KERNEL);
+ led->trigger_data = n;
+ if (!n) {
+ dev_err(led->dev, "unable to allocate backlight trigger\n");
+ return;
+ }
+
+ ret = device_create_file(led->dev, &dev_attr_inverted);
+ if (ret)
+ goto err_invert;
+
+ n->led = led;
+ n->brightness = led->brightness;
+ n->old_status = UNBLANK;
+ n->notifier.notifier_call = fb_notifier_callback;
+
+ ret = fb_register_client(&n->notifier);
+ if (ret)
+ dev_err(led->dev, "unable to register backlight trigger\n");
+ led->activated = true;
+
+ return;
+
+err_invert:
+ led->trigger_data = NULL;
+ kfree(n);
+}
+
+static void bl_trig_deactivate(struct led_classdev *led)
+{
+ struct bl_trig_notifier *n =
+ (struct bl_trig_notifier *) led->trigger_data;
+
+ if (led->activated) {
+ device_remove_file(led->dev, &dev_attr_inverted);
+ fb_unregister_client(&n->notifier);
+ kfree(n);
+ led->activated = false;
+ }
+}
+
+static struct led_trigger bl_led_trigger = {
+ .name = "backlight",
+ .activate = bl_trig_activate,
+ .deactivate = bl_trig_deactivate
+};
+
+static int __init bl_trig_init(void)
+{
+ return led_trigger_register(&bl_led_trigger);
+}
+
+static void __exit bl_trig_exit(void)
+{
+ led_trigger_unregister(&bl_led_trigger);
+}
+
+module_init(bl_trig_init);
+module_exit(bl_trig_exit);
+
+MODULE_AUTHOR("Rodolfo Giometti <giometti@linux.it>");
+MODULE_DESCRIPTION("Backlight emulation LED trigger");
+MODULE_LICENSE("GPL v2");
diff --git a/kernel/drivers/leds/trigger/ledtrig-camera.c b/kernel/drivers/leds/trigger/ledtrig-camera.c
new file mode 100644
index 000000000..9bd73a8ba
--- /dev/null
+++ b/kernel/drivers/leds/trigger/ledtrig-camera.c
@@ -0,0 +1,57 @@
+/*
+ * Camera Flash and Torch On/Off Trigger
+ *
+ * based on ledtrig-ide-disk.c
+ *
+ * Copyright 2013 Texas Instruments
+ *
+ * Author: Milo(Woogyom) Kim <milo.kim@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/leds.h>
+
+DEFINE_LED_TRIGGER(ledtrig_flash);
+DEFINE_LED_TRIGGER(ledtrig_torch);
+
+void ledtrig_flash_ctrl(bool on)
+{
+ enum led_brightness brt = on ? LED_FULL : LED_OFF;
+
+ led_trigger_event(ledtrig_flash, brt);
+}
+EXPORT_SYMBOL_GPL(ledtrig_flash_ctrl);
+
+void ledtrig_torch_ctrl(bool on)
+{
+ enum led_brightness brt = on ? LED_FULL : LED_OFF;
+
+ led_trigger_event(ledtrig_torch, brt);
+}
+EXPORT_SYMBOL_GPL(ledtrig_torch_ctrl);
+
+static int __init ledtrig_camera_init(void)
+{
+ led_trigger_register_simple("flash", &ledtrig_flash);
+ led_trigger_register_simple("torch", &ledtrig_torch);
+ return 0;
+}
+module_init(ledtrig_camera_init);
+
+static void __exit ledtrig_camera_exit(void)
+{
+ led_trigger_unregister_simple(ledtrig_torch);
+ led_trigger_unregister_simple(ledtrig_flash);
+}
+module_exit(ledtrig_camera_exit);
+
+MODULE_DESCRIPTION("LED Trigger for Camera Flash/Torch Control");
+MODULE_AUTHOR("Milo Kim");
+MODULE_LICENSE("GPL");
diff --git a/kernel/drivers/leds/trigger/ledtrig-cpu.c b/kernel/drivers/leds/trigger/ledtrig-cpu.c
new file mode 100644
index 000000000..aec0f02b6
--- /dev/null
+++ b/kernel/drivers/leds/trigger/ledtrig-cpu.c
@@ -0,0 +1,166 @@
+/*
+ * ledtrig-cpu.c - LED trigger based on CPU activity
+ *
+ * This LED trigger will be registered for each possible CPU and named as
+ * cpu0, cpu1, cpu2, cpu3, etc.
+ *
+ * It can be bound to any LED just like other triggers using either a
+ * board file or via sysfs interface.
+ *
+ * An API named ledtrig_cpu is exported for any user, who want to add CPU
+ * activity indication in their code
+ *
+ * Copyright 2011 Linus Walleij <linus.walleij@linaro.org>
+ * Copyright 2011 - 2012 Bryan Wu <bryan.wu@canonical.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/percpu.h>
+#include <linux/syscore_ops.h>
+#include <linux/rwsem.h>
+#include <linux/cpu.h>
+#include "../leds.h"
+
+#define MAX_NAME_LEN 8
+
+struct led_trigger_cpu {
+ char name[MAX_NAME_LEN];
+ struct led_trigger *_trig;
+};
+
+static DEFINE_PER_CPU(struct led_trigger_cpu, cpu_trig);
+
+/**
+ * ledtrig_cpu - emit a CPU event as a trigger
+ * @evt: CPU event to be emitted
+ *
+ * Emit a CPU event on a CPU core, which will trigger a
+ * binded LED to turn on or turn off.
+ */
+void ledtrig_cpu(enum cpu_led_event ledevt)
+{
+ struct led_trigger_cpu *trig = this_cpu_ptr(&cpu_trig);
+
+ /* Locate the correct CPU LED */
+ switch (ledevt) {
+ case CPU_LED_IDLE_END:
+ case CPU_LED_START:
+ /* Will turn the LED on, max brightness */
+ led_trigger_event(trig->_trig, LED_FULL);
+ break;
+
+ case CPU_LED_IDLE_START:
+ case CPU_LED_STOP:
+ case CPU_LED_HALTED:
+ /* Will turn the LED off */
+ led_trigger_event(trig->_trig, LED_OFF);
+ break;
+
+ default:
+ /* Will leave the LED as it is */
+ break;
+ }
+}
+EXPORT_SYMBOL(ledtrig_cpu);
+
+static int ledtrig_cpu_syscore_suspend(void)
+{
+ ledtrig_cpu(CPU_LED_STOP);
+ return 0;
+}
+
+static void ledtrig_cpu_syscore_resume(void)
+{
+ ledtrig_cpu(CPU_LED_START);
+}
+
+static void ledtrig_cpu_syscore_shutdown(void)
+{
+ ledtrig_cpu(CPU_LED_HALTED);
+}
+
+static struct syscore_ops ledtrig_cpu_syscore_ops = {
+ .shutdown = ledtrig_cpu_syscore_shutdown,
+ .suspend = ledtrig_cpu_syscore_suspend,
+ .resume = ledtrig_cpu_syscore_resume,
+};
+
+static int ledtrig_cpu_notify(struct notifier_block *self,
+ unsigned long action, void *hcpu)
+{
+ switch (action & ~CPU_TASKS_FROZEN) {
+ case CPU_STARTING:
+ ledtrig_cpu(CPU_LED_START);
+ break;
+ case CPU_DYING:
+ ledtrig_cpu(CPU_LED_STOP);
+ break;
+ }
+
+ return NOTIFY_OK;
+}
+
+
+static struct notifier_block ledtrig_cpu_nb = {
+ .notifier_call = ledtrig_cpu_notify,
+};
+
+static int __init ledtrig_cpu_init(void)
+{
+ int cpu;
+
+ /* Supports up to 9999 cpu cores */
+ BUILD_BUG_ON(CONFIG_NR_CPUS > 9999);
+
+ /*
+ * Registering CPU led trigger for each CPU core here
+ * ignores CPU hotplug, but after this CPU hotplug works
+ * fine with this trigger.
+ */
+ for_each_possible_cpu(cpu) {
+ struct led_trigger_cpu *trig = &per_cpu(cpu_trig, cpu);
+
+ snprintf(trig->name, MAX_NAME_LEN, "cpu%d", cpu);
+
+ led_trigger_register_simple(trig->name, &trig->_trig);
+ }
+
+ register_syscore_ops(&ledtrig_cpu_syscore_ops);
+ register_cpu_notifier(&ledtrig_cpu_nb);
+
+ pr_info("ledtrig-cpu: registered to indicate activity on CPUs\n");
+
+ return 0;
+}
+module_init(ledtrig_cpu_init);
+
+static void __exit ledtrig_cpu_exit(void)
+{
+ int cpu;
+
+ unregister_cpu_notifier(&ledtrig_cpu_nb);
+
+ for_each_possible_cpu(cpu) {
+ struct led_trigger_cpu *trig = &per_cpu(cpu_trig, cpu);
+
+ led_trigger_unregister_simple(trig->_trig);
+ trig->_trig = NULL;
+ memset(trig->name, 0, MAX_NAME_LEN);
+ }
+
+ unregister_syscore_ops(&ledtrig_cpu_syscore_ops);
+}
+module_exit(ledtrig_cpu_exit);
+
+MODULE_AUTHOR("Linus Walleij <linus.walleij@linaro.org>");
+MODULE_AUTHOR("Bryan Wu <bryan.wu@canonical.com>");
+MODULE_DESCRIPTION("CPU LED trigger");
+MODULE_LICENSE("GPL");
diff --git a/kernel/drivers/leds/trigger/ledtrig-default-on.c b/kernel/drivers/leds/trigger/ledtrig-default-on.c
new file mode 100644
index 000000000..6f38f883a
--- /dev/null
+++ b/kernel/drivers/leds/trigger/ledtrig-default-on.c
@@ -0,0 +1,45 @@
+/*
+ * LED Kernel Default ON Trigger
+ *
+ * Copyright 2008 Nick Forbes <nick.forbes@incepta.com>
+ *
+ * Based on Richard Purdie's ledtrig-timer.c.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/leds.h>
+#include "../leds.h"
+
+static void defon_trig_activate(struct led_classdev *led_cdev)
+{
+ led_set_brightness_async(led_cdev, led_cdev->max_brightness);
+}
+
+static struct led_trigger defon_led_trigger = {
+ .name = "default-on",
+ .activate = defon_trig_activate,
+};
+
+static int __init defon_trig_init(void)
+{
+ return led_trigger_register(&defon_led_trigger);
+}
+
+static void __exit defon_trig_exit(void)
+{
+ led_trigger_unregister(&defon_led_trigger);
+}
+
+module_init(defon_trig_init);
+module_exit(defon_trig_exit);
+
+MODULE_AUTHOR("Nick Forbes <nick.forbes@incepta.com>");
+MODULE_DESCRIPTION("Default-ON LED trigger");
+MODULE_LICENSE("GPL");
diff --git a/kernel/drivers/leds/trigger/ledtrig-gpio.c b/kernel/drivers/leds/trigger/ledtrig-gpio.c
new file mode 100644
index 000000000..4cc704074
--- /dev/null
+++ b/kernel/drivers/leds/trigger/ledtrig-gpio.c
@@ -0,0 +1,253 @@
+/*
+ * ledtrig-gio.c - LED Trigger Based on GPIO events
+ *
+ * Copyright 2009 Felipe Balbi <me@felipebalbi.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/gpio.h>
+#include <linux/interrupt.h>
+#include <linux/workqueue.h>
+#include <linux/leds.h>
+#include <linux/slab.h>
+#include "../leds.h"
+
+struct gpio_trig_data {
+ struct led_classdev *led;
+ struct work_struct work;
+
+ unsigned desired_brightness; /* desired brightness when led is on */
+ unsigned inverted; /* true when gpio is inverted */
+ unsigned gpio; /* gpio that triggers the leds */
+};
+
+static irqreturn_t gpio_trig_irq(int irq, void *_led)
+{
+ struct led_classdev *led = _led;
+ struct gpio_trig_data *gpio_data = led->trigger_data;
+
+ /* just schedule_work since gpio_get_value can sleep */
+ schedule_work(&gpio_data->work);
+
+ return IRQ_HANDLED;
+};
+
+static void gpio_trig_work(struct work_struct *work)
+{
+ struct gpio_trig_data *gpio_data = container_of(work,
+ struct gpio_trig_data, work);
+ int tmp;
+
+ if (!gpio_data->gpio)
+ return;
+
+ tmp = gpio_get_value_cansleep(gpio_data->gpio);
+ if (gpio_data->inverted)
+ tmp = !tmp;
+
+ if (tmp) {
+ if (gpio_data->desired_brightness)
+ led_set_brightness_async(gpio_data->led,
+ gpio_data->desired_brightness);
+ else
+ led_set_brightness_async(gpio_data->led, LED_FULL);
+ } else {
+ led_set_brightness_async(gpio_data->led, LED_OFF);
+ }
+}
+
+static ssize_t gpio_trig_brightness_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct led_classdev *led = dev_get_drvdata(dev);
+ struct gpio_trig_data *gpio_data = led->trigger_data;
+
+ return sprintf(buf, "%u\n", gpio_data->desired_brightness);
+}
+
+static ssize_t gpio_trig_brightness_store(struct device *dev,
+ struct device_attribute *attr, const char *buf, size_t n)
+{
+ struct led_classdev *led = dev_get_drvdata(dev);
+ struct gpio_trig_data *gpio_data = led->trigger_data;
+ unsigned desired_brightness;
+ int ret;
+
+ ret = sscanf(buf, "%u", &desired_brightness);
+ if (ret < 1 || desired_brightness > 255) {
+ dev_err(dev, "invalid value\n");
+ return -EINVAL;
+ }
+
+ gpio_data->desired_brightness = desired_brightness;
+
+ return n;
+}
+static DEVICE_ATTR(desired_brightness, 0644, gpio_trig_brightness_show,
+ gpio_trig_brightness_store);
+
+static ssize_t gpio_trig_inverted_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct led_classdev *led = dev_get_drvdata(dev);
+ struct gpio_trig_data *gpio_data = led->trigger_data;
+
+ return sprintf(buf, "%u\n", gpio_data->inverted);
+}
+
+static ssize_t gpio_trig_inverted_store(struct device *dev,
+ struct device_attribute *attr, const char *buf, size_t n)
+{
+ struct led_classdev *led = dev_get_drvdata(dev);
+ struct gpio_trig_data *gpio_data = led->trigger_data;
+ unsigned long inverted;
+ int ret;
+
+ ret = kstrtoul(buf, 10, &inverted);
+ if (ret < 0)
+ return ret;
+
+ if (inverted > 1)
+ return -EINVAL;
+
+ gpio_data->inverted = inverted;
+
+ /* After inverting, we need to update the LED. */
+ schedule_work(&gpio_data->work);
+
+ return n;
+}
+static DEVICE_ATTR(inverted, 0644, gpio_trig_inverted_show,
+ gpio_trig_inverted_store);
+
+static ssize_t gpio_trig_gpio_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct led_classdev *led = dev_get_drvdata(dev);
+ struct gpio_trig_data *gpio_data = led->trigger_data;
+
+ return sprintf(buf, "%u\n", gpio_data->gpio);
+}
+
+static ssize_t gpio_trig_gpio_store(struct device *dev,
+ struct device_attribute *attr, const char *buf, size_t n)
+{
+ struct led_classdev *led = dev_get_drvdata(dev);
+ struct gpio_trig_data *gpio_data = led->trigger_data;
+ unsigned gpio;
+ int ret;
+
+ ret = sscanf(buf, "%u", &gpio);
+ if (ret < 1) {
+ dev_err(dev, "couldn't read gpio number\n");
+ flush_work(&gpio_data->work);
+ return -EINVAL;
+ }
+
+ if (gpio_data->gpio == gpio)
+ return n;
+
+ if (!gpio) {
+ if (gpio_data->gpio != 0)
+ free_irq(gpio_to_irq(gpio_data->gpio), led);
+ gpio_data->gpio = 0;
+ return n;
+ }
+
+ ret = request_irq(gpio_to_irq(gpio), gpio_trig_irq,
+ IRQF_SHARED | IRQF_TRIGGER_RISING
+ | IRQF_TRIGGER_FALLING, "ledtrig-gpio", led);
+ if (ret) {
+ dev_err(dev, "request_irq failed with error %d\n", ret);
+ } else {
+ if (gpio_data->gpio != 0)
+ free_irq(gpio_to_irq(gpio_data->gpio), led);
+ gpio_data->gpio = gpio;
+ }
+
+ return ret ? ret : n;
+}
+static DEVICE_ATTR(gpio, 0644, gpio_trig_gpio_show, gpio_trig_gpio_store);
+
+static void gpio_trig_activate(struct led_classdev *led)
+{
+ struct gpio_trig_data *gpio_data;
+ int ret;
+
+ gpio_data = kzalloc(sizeof(*gpio_data), GFP_KERNEL);
+ if (!gpio_data)
+ return;
+
+ ret = device_create_file(led->dev, &dev_attr_gpio);
+ if (ret)
+ goto err_gpio;
+
+ ret = device_create_file(led->dev, &dev_attr_inverted);
+ if (ret)
+ goto err_inverted;
+
+ ret = device_create_file(led->dev, &dev_attr_desired_brightness);
+ if (ret)
+ goto err_brightness;
+
+ gpio_data->led = led;
+ led->trigger_data = gpio_data;
+ INIT_WORK(&gpio_data->work, gpio_trig_work);
+ led->activated = true;
+
+ return;
+
+err_brightness:
+ device_remove_file(led->dev, &dev_attr_inverted);
+
+err_inverted:
+ device_remove_file(led->dev, &dev_attr_gpio);
+
+err_gpio:
+ kfree(gpio_data);
+}
+
+static void gpio_trig_deactivate(struct led_classdev *led)
+{
+ struct gpio_trig_data *gpio_data = led->trigger_data;
+
+ if (led->activated) {
+ device_remove_file(led->dev, &dev_attr_gpio);
+ device_remove_file(led->dev, &dev_attr_inverted);
+ device_remove_file(led->dev, &dev_attr_desired_brightness);
+ flush_work(&gpio_data->work);
+ if (gpio_data->gpio != 0)
+ free_irq(gpio_to_irq(gpio_data->gpio), led);
+ kfree(gpio_data);
+ led->activated = false;
+ }
+}
+
+static struct led_trigger gpio_led_trigger = {
+ .name = "gpio",
+ .activate = gpio_trig_activate,
+ .deactivate = gpio_trig_deactivate,
+};
+
+static int __init gpio_trig_init(void)
+{
+ return led_trigger_register(&gpio_led_trigger);
+}
+module_init(gpio_trig_init);
+
+static void __exit gpio_trig_exit(void)
+{
+ led_trigger_unregister(&gpio_led_trigger);
+}
+module_exit(gpio_trig_exit);
+
+MODULE_AUTHOR("Felipe Balbi <me@felipebalbi.com>");
+MODULE_DESCRIPTION("GPIO LED trigger");
+MODULE_LICENSE("GPL");
diff --git a/kernel/drivers/leds/trigger/ledtrig-heartbeat.c b/kernel/drivers/leds/trigger/ledtrig-heartbeat.c
new file mode 100644
index 000000000..fea6871d2
--- /dev/null
+++ b/kernel/drivers/leds/trigger/ledtrig-heartbeat.c
@@ -0,0 +1,161 @@
+/*
+ * LED Heartbeat Trigger
+ *
+ * Copyright (C) 2006 Atsushi Nemoto <anemo@mba.ocn.ne.jp>
+ *
+ * Based on Richard Purdie's ledtrig-timer.c and some arch's
+ * CONFIG_HEARTBEAT code.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/timer.h>
+#include <linux/sched.h>
+#include <linux/leds.h>
+#include <linux/reboot.h>
+#include "../leds.h"
+
+static int panic_heartbeats;
+
+struct heartbeat_trig_data {
+ unsigned int phase;
+ unsigned int period;
+ struct timer_list timer;
+};
+
+static void led_heartbeat_function(unsigned long data)
+{
+ struct led_classdev *led_cdev = (struct led_classdev *) data;
+ struct heartbeat_trig_data *heartbeat_data = led_cdev->trigger_data;
+ unsigned long brightness = LED_OFF;
+ unsigned long delay = 0;
+
+ if (unlikely(panic_heartbeats)) {
+ led_set_brightness(led_cdev, LED_OFF);
+ return;
+ }
+
+ /* acts like an actual heart beat -- ie thump-thump-pause... */
+ switch (heartbeat_data->phase) {
+ case 0:
+ /*
+ * The hyperbolic function below modifies the
+ * heartbeat period length in dependency of the
+ * current (1min) load. It goes through the points
+ * f(0)=1260, f(1)=860, f(5)=510, f(inf)->300.
+ */
+ heartbeat_data->period = 300 +
+ (6720 << FSHIFT) / (5 * avenrun[0] + (7 << FSHIFT));
+ heartbeat_data->period =
+ msecs_to_jiffies(heartbeat_data->period);
+ delay = msecs_to_jiffies(70);
+ heartbeat_data->phase++;
+ brightness = led_cdev->max_brightness;
+ break;
+ case 1:
+ delay = heartbeat_data->period / 4 - msecs_to_jiffies(70);
+ heartbeat_data->phase++;
+ break;
+ case 2:
+ delay = msecs_to_jiffies(70);
+ heartbeat_data->phase++;
+ brightness = led_cdev->max_brightness;
+ break;
+ default:
+ delay = heartbeat_data->period - heartbeat_data->period / 4 -
+ msecs_to_jiffies(70);
+ heartbeat_data->phase = 0;
+ break;
+ }
+
+ led_set_brightness_async(led_cdev, brightness);
+ mod_timer(&heartbeat_data->timer, jiffies + delay);
+}
+
+static void heartbeat_trig_activate(struct led_classdev *led_cdev)
+{
+ struct heartbeat_trig_data *heartbeat_data;
+
+ heartbeat_data = kzalloc(sizeof(*heartbeat_data), GFP_KERNEL);
+ if (!heartbeat_data)
+ return;
+
+ led_cdev->trigger_data = heartbeat_data;
+ setup_timer(&heartbeat_data->timer,
+ led_heartbeat_function, (unsigned long) led_cdev);
+ heartbeat_data->phase = 0;
+ led_heartbeat_function(heartbeat_data->timer.data);
+ led_cdev->activated = true;
+}
+
+static void heartbeat_trig_deactivate(struct led_classdev *led_cdev)
+{
+ struct heartbeat_trig_data *heartbeat_data = led_cdev->trigger_data;
+
+ if (led_cdev->activated) {
+ del_timer_sync(&heartbeat_data->timer);
+ kfree(heartbeat_data);
+ led_cdev->activated = false;
+ }
+}
+
+static struct led_trigger heartbeat_led_trigger = {
+ .name = "heartbeat",
+ .activate = heartbeat_trig_activate,
+ .deactivate = heartbeat_trig_deactivate,
+};
+
+static int heartbeat_reboot_notifier(struct notifier_block *nb,
+ unsigned long code, void *unused)
+{
+ led_trigger_unregister(&heartbeat_led_trigger);
+ return NOTIFY_DONE;
+}
+
+static int heartbeat_panic_notifier(struct notifier_block *nb,
+ unsigned long code, void *unused)
+{
+ panic_heartbeats = 1;
+ return NOTIFY_DONE;
+}
+
+static struct notifier_block heartbeat_reboot_nb = {
+ .notifier_call = heartbeat_reboot_notifier,
+};
+
+static struct notifier_block heartbeat_panic_nb = {
+ .notifier_call = heartbeat_panic_notifier,
+};
+
+static int __init heartbeat_trig_init(void)
+{
+ int rc = led_trigger_register(&heartbeat_led_trigger);
+
+ if (!rc) {
+ atomic_notifier_chain_register(&panic_notifier_list,
+ &heartbeat_panic_nb);
+ register_reboot_notifier(&heartbeat_reboot_nb);
+ }
+ return rc;
+}
+
+static void __exit heartbeat_trig_exit(void)
+{
+ unregister_reboot_notifier(&heartbeat_reboot_nb);
+ atomic_notifier_chain_unregister(&panic_notifier_list,
+ &heartbeat_panic_nb);
+ led_trigger_unregister(&heartbeat_led_trigger);
+}
+
+module_init(heartbeat_trig_init);
+module_exit(heartbeat_trig_exit);
+
+MODULE_AUTHOR("Atsushi Nemoto <anemo@mba.ocn.ne.jp>");
+MODULE_DESCRIPTION("Heartbeat LED trigger");
+MODULE_LICENSE("GPL");
diff --git a/kernel/drivers/leds/trigger/ledtrig-ide-disk.c b/kernel/drivers/leds/trigger/ledtrig-ide-disk.c
new file mode 100644
index 000000000..2cd7c0cf5
--- /dev/null
+++ b/kernel/drivers/leds/trigger/ledtrig-ide-disk.c
@@ -0,0 +1,47 @@
+/*
+ * LED IDE-Disk Activity Trigger
+ *
+ * Copyright 2006 Openedhand Ltd.
+ *
+ * Author: Richard Purdie <rpurdie@openedhand.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/leds.h>
+
+#define BLINK_DELAY 30
+
+DEFINE_LED_TRIGGER(ledtrig_ide);
+static unsigned long ide_blink_delay = BLINK_DELAY;
+
+void ledtrig_ide_activity(void)
+{
+ led_trigger_blink_oneshot(ledtrig_ide,
+ &ide_blink_delay, &ide_blink_delay, 0);
+}
+EXPORT_SYMBOL(ledtrig_ide_activity);
+
+static int __init ledtrig_ide_init(void)
+{
+ led_trigger_register_simple("ide-disk", &ledtrig_ide);
+ return 0;
+}
+
+static void __exit ledtrig_ide_exit(void)
+{
+ led_trigger_unregister_simple(ledtrig_ide);
+}
+
+module_init(ledtrig_ide_init);
+module_exit(ledtrig_ide_exit);
+
+MODULE_AUTHOR("Richard Purdie <rpurdie@openedhand.com>");
+MODULE_DESCRIPTION("LED IDE Disk Activity Trigger");
+MODULE_LICENSE("GPL");
diff --git a/kernel/drivers/leds/trigger/ledtrig-oneshot.c b/kernel/drivers/leds/trigger/ledtrig-oneshot.c
new file mode 100644
index 000000000..fbd02cdc3
--- /dev/null
+++ b/kernel/drivers/leds/trigger/ledtrig-oneshot.c
@@ -0,0 +1,204 @@
+/*
+ * One-shot LED Trigger
+ *
+ * Copyright 2012, Fabio Baltieri <fabio.baltieri@gmail.com>
+ *
+ * Based on ledtrig-timer.c by Richard Purdie <rpurdie@openedhand.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/ctype.h>
+#include <linux/slab.h>
+#include <linux/leds.h>
+#include "../leds.h"
+
+#define DEFAULT_DELAY 100
+
+struct oneshot_trig_data {
+ unsigned int invert;
+};
+
+static ssize_t led_shot(struct device *dev,
+ struct device_attribute *attr, const char *buf, size_t size)
+{
+ struct led_classdev *led_cdev = dev_get_drvdata(dev);
+ struct oneshot_trig_data *oneshot_data = led_cdev->trigger_data;
+
+ led_blink_set_oneshot(led_cdev,
+ &led_cdev->blink_delay_on, &led_cdev->blink_delay_off,
+ oneshot_data->invert);
+
+ /* content is ignored */
+ return size;
+}
+static ssize_t led_invert_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct led_classdev *led_cdev = dev_get_drvdata(dev);
+ struct oneshot_trig_data *oneshot_data = led_cdev->trigger_data;
+
+ return sprintf(buf, "%u\n", oneshot_data->invert);
+}
+
+static ssize_t led_invert_store(struct device *dev,
+ struct device_attribute *attr, const char *buf, size_t size)
+{
+ struct led_classdev *led_cdev = dev_get_drvdata(dev);
+ struct oneshot_trig_data *oneshot_data = led_cdev->trigger_data;
+ unsigned long state;
+ int ret;
+
+ ret = kstrtoul(buf, 0, &state);
+ if (ret)
+ return ret;
+
+ oneshot_data->invert = !!state;
+
+ if (oneshot_data->invert)
+ led_set_brightness_async(led_cdev, LED_FULL);
+ else
+ led_set_brightness_async(led_cdev, LED_OFF);
+
+ return size;
+}
+
+static ssize_t led_delay_on_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct led_classdev *led_cdev = dev_get_drvdata(dev);
+
+ return sprintf(buf, "%lu\n", led_cdev->blink_delay_on);
+}
+
+static ssize_t led_delay_on_store(struct device *dev,
+ struct device_attribute *attr, const char *buf, size_t size)
+{
+ struct led_classdev *led_cdev = dev_get_drvdata(dev);
+ unsigned long state;
+ int ret;
+
+ ret = kstrtoul(buf, 0, &state);
+ if (ret)
+ return ret;
+
+ led_cdev->blink_delay_on = state;
+
+ return size;
+}
+static ssize_t led_delay_off_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct led_classdev *led_cdev = dev_get_drvdata(dev);
+
+ return sprintf(buf, "%lu\n", led_cdev->blink_delay_off);
+}
+
+static ssize_t led_delay_off_store(struct device *dev,
+ struct device_attribute *attr, const char *buf, size_t size)
+{
+ struct led_classdev *led_cdev = dev_get_drvdata(dev);
+ unsigned long state;
+ int ret;
+
+ ret = kstrtoul(buf, 0, &state);
+ if (ret)
+ return ret;
+
+ led_cdev->blink_delay_off = state;
+
+ return size;
+}
+
+static DEVICE_ATTR(delay_on, 0644, led_delay_on_show, led_delay_on_store);
+static DEVICE_ATTR(delay_off, 0644, led_delay_off_show, led_delay_off_store);
+static DEVICE_ATTR(invert, 0644, led_invert_show, led_invert_store);
+static DEVICE_ATTR(shot, 0200, NULL, led_shot);
+
+static void oneshot_trig_activate(struct led_classdev *led_cdev)
+{
+ struct oneshot_trig_data *oneshot_data;
+ int rc;
+
+ oneshot_data = kzalloc(sizeof(*oneshot_data), GFP_KERNEL);
+ if (!oneshot_data)
+ return;
+
+ led_cdev->trigger_data = oneshot_data;
+
+ rc = device_create_file(led_cdev->dev, &dev_attr_delay_on);
+ if (rc)
+ goto err_out_trig_data;
+ rc = device_create_file(led_cdev->dev, &dev_attr_delay_off);
+ if (rc)
+ goto err_out_delayon;
+ rc = device_create_file(led_cdev->dev, &dev_attr_invert);
+ if (rc)
+ goto err_out_delayoff;
+ rc = device_create_file(led_cdev->dev, &dev_attr_shot);
+ if (rc)
+ goto err_out_invert;
+
+ led_cdev->blink_delay_on = DEFAULT_DELAY;
+ led_cdev->blink_delay_off = DEFAULT_DELAY;
+
+ led_cdev->activated = true;
+
+ return;
+
+err_out_invert:
+ device_remove_file(led_cdev->dev, &dev_attr_invert);
+err_out_delayoff:
+ device_remove_file(led_cdev->dev, &dev_attr_delay_off);
+err_out_delayon:
+ device_remove_file(led_cdev->dev, &dev_attr_delay_on);
+err_out_trig_data:
+ kfree(led_cdev->trigger_data);
+}
+
+static void oneshot_trig_deactivate(struct led_classdev *led_cdev)
+{
+ struct oneshot_trig_data *oneshot_data = led_cdev->trigger_data;
+
+ if (led_cdev->activated) {
+ device_remove_file(led_cdev->dev, &dev_attr_delay_on);
+ device_remove_file(led_cdev->dev, &dev_attr_delay_off);
+ device_remove_file(led_cdev->dev, &dev_attr_invert);
+ device_remove_file(led_cdev->dev, &dev_attr_shot);
+ kfree(oneshot_data);
+ led_cdev->activated = false;
+ }
+
+ /* Stop blinking */
+ led_set_brightness(led_cdev, LED_OFF);
+}
+
+static struct led_trigger oneshot_led_trigger = {
+ .name = "oneshot",
+ .activate = oneshot_trig_activate,
+ .deactivate = oneshot_trig_deactivate,
+};
+
+static int __init oneshot_trig_init(void)
+{
+ return led_trigger_register(&oneshot_led_trigger);
+}
+
+static void __exit oneshot_trig_exit(void)
+{
+ led_trigger_unregister(&oneshot_led_trigger);
+}
+
+module_init(oneshot_trig_init);
+module_exit(oneshot_trig_exit);
+
+MODULE_AUTHOR("Fabio Baltieri <fabio.baltieri@gmail.com>");
+MODULE_DESCRIPTION("One-shot LED trigger");
+MODULE_LICENSE("GPL");
diff --git a/kernel/drivers/leds/trigger/ledtrig-timer.c b/kernel/drivers/leds/trigger/ledtrig-timer.c
new file mode 100644
index 000000000..8d09327b5
--- /dev/null
+++ b/kernel/drivers/leds/trigger/ledtrig-timer.c
@@ -0,0 +1,130 @@
+/*
+ * LED Kernel Timer Trigger
+ *
+ * Copyright 2005-2006 Openedhand Ltd.
+ *
+ * Author: Richard Purdie <rpurdie@openedhand.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/ctype.h>
+#include <linux/leds.h>
+
+static ssize_t led_delay_on_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct led_classdev *led_cdev = dev_get_drvdata(dev);
+
+ return sprintf(buf, "%lu\n", led_cdev->blink_delay_on);
+}
+
+static ssize_t led_delay_on_store(struct device *dev,
+ struct device_attribute *attr, const char *buf, size_t size)
+{
+ struct led_classdev *led_cdev = dev_get_drvdata(dev);
+ unsigned long state;
+ ssize_t ret = -EINVAL;
+
+ ret = kstrtoul(buf, 10, &state);
+ if (ret)
+ return ret;
+
+ led_blink_set(led_cdev, &state, &led_cdev->blink_delay_off);
+ led_cdev->blink_delay_on = state;
+
+ return size;
+}
+
+static ssize_t led_delay_off_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct led_classdev *led_cdev = dev_get_drvdata(dev);
+
+ return sprintf(buf, "%lu\n", led_cdev->blink_delay_off);
+}
+
+static ssize_t led_delay_off_store(struct device *dev,
+ struct device_attribute *attr, const char *buf, size_t size)
+{
+ struct led_classdev *led_cdev = dev_get_drvdata(dev);
+ unsigned long state;
+ ssize_t ret = -EINVAL;
+
+ ret = kstrtoul(buf, 10, &state);
+ if (ret)
+ return ret;
+
+ led_blink_set(led_cdev, &led_cdev->blink_delay_on, &state);
+ led_cdev->blink_delay_off = state;
+
+ return size;
+}
+
+static DEVICE_ATTR(delay_on, 0644, led_delay_on_show, led_delay_on_store);
+static DEVICE_ATTR(delay_off, 0644, led_delay_off_show, led_delay_off_store);
+
+static void timer_trig_activate(struct led_classdev *led_cdev)
+{
+ int rc;
+
+ led_cdev->trigger_data = NULL;
+
+ rc = device_create_file(led_cdev->dev, &dev_attr_delay_on);
+ if (rc)
+ return;
+ rc = device_create_file(led_cdev->dev, &dev_attr_delay_off);
+ if (rc)
+ goto err_out_delayon;
+
+ led_blink_set(led_cdev, &led_cdev->blink_delay_on,
+ &led_cdev->blink_delay_off);
+ led_cdev->activated = true;
+
+ return;
+
+err_out_delayon:
+ device_remove_file(led_cdev->dev, &dev_attr_delay_on);
+}
+
+static void timer_trig_deactivate(struct led_classdev *led_cdev)
+{
+ if (led_cdev->activated) {
+ device_remove_file(led_cdev->dev, &dev_attr_delay_on);
+ device_remove_file(led_cdev->dev, &dev_attr_delay_off);
+ led_cdev->activated = false;
+ }
+
+ /* Stop blinking */
+ led_set_brightness(led_cdev, LED_OFF);
+}
+
+static struct led_trigger timer_led_trigger = {
+ .name = "timer",
+ .activate = timer_trig_activate,
+ .deactivate = timer_trig_deactivate,
+};
+
+static int __init timer_trig_init(void)
+{
+ return led_trigger_register(&timer_led_trigger);
+}
+
+static void __exit timer_trig_exit(void)
+{
+ led_trigger_unregister(&timer_led_trigger);
+}
+
+module_init(timer_trig_init);
+module_exit(timer_trig_exit);
+
+MODULE_AUTHOR("Richard Purdie <rpurdie@openedhand.com>");
+MODULE_DESCRIPTION("Timer LED trigger");
+MODULE_LICENSE("GPL");
diff --git a/kernel/drivers/leds/trigger/ledtrig-transient.c b/kernel/drivers/leds/trigger/ledtrig-transient.c
new file mode 100644
index 000000000..3c34de404
--- /dev/null
+++ b/kernel/drivers/leds/trigger/ledtrig-transient.c
@@ -0,0 +1,239 @@
+/*
+ * LED Kernel Transient Trigger
+ *
+ * Copyright (C) 2012 Shuah Khan <shuahkhan@gmail.com>
+ *
+ * Based on Richard Purdie's ledtrig-timer.c and Atsushi Nemoto's
+ * ledtrig-heartbeat.c
+ * Design and use-case input from Jonas Bonn <jonas@southpole.se> and
+ * Neil Brown <neilb@suse.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+/*
+ * Transient trigger allows one shot timer activation. Please refer to
+ * Documentation/leds/ledtrig-transient.txt for details
+*/
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/slab.h>
+#include <linux/timer.h>
+#include <linux/leds.h>
+#include "../leds.h"
+
+struct transient_trig_data {
+ int activate;
+ int state;
+ int restore_state;
+ unsigned long duration;
+ struct timer_list timer;
+};
+
+static void transient_timer_function(unsigned long data)
+{
+ struct led_classdev *led_cdev = (struct led_classdev *) data;
+ struct transient_trig_data *transient_data = led_cdev->trigger_data;
+
+ transient_data->activate = 0;
+ led_set_brightness_async(led_cdev, transient_data->restore_state);
+}
+
+static ssize_t transient_activate_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct led_classdev *led_cdev = dev_get_drvdata(dev);
+ struct transient_trig_data *transient_data = led_cdev->trigger_data;
+
+ return sprintf(buf, "%d\n", transient_data->activate);
+}
+
+static ssize_t transient_activate_store(struct device *dev,
+ struct device_attribute *attr, const char *buf, size_t size)
+{
+ struct led_classdev *led_cdev = dev_get_drvdata(dev);
+ struct transient_trig_data *transient_data = led_cdev->trigger_data;
+ unsigned long state;
+ ssize_t ret;
+
+ ret = kstrtoul(buf, 10, &state);
+ if (ret)
+ return ret;
+
+ if (state != 1 && state != 0)
+ return -EINVAL;
+
+ /* cancel the running timer */
+ if (state == 0 && transient_data->activate == 1) {
+ del_timer(&transient_data->timer);
+ transient_data->activate = state;
+ led_set_brightness_async(led_cdev,
+ transient_data->restore_state);
+ return size;
+ }
+
+ /* start timer if there is no active timer */
+ if (state == 1 && transient_data->activate == 0 &&
+ transient_data->duration != 0) {
+ transient_data->activate = state;
+ led_set_brightness_async(led_cdev, transient_data->state);
+ transient_data->restore_state =
+ (transient_data->state == LED_FULL) ? LED_OFF : LED_FULL;
+ mod_timer(&transient_data->timer,
+ jiffies + transient_data->duration);
+ }
+
+ /* state == 0 && transient_data->activate == 0
+ timer is not active - just return */
+ /* state == 1 && transient_data->activate == 1
+ timer is already active - just return */
+
+ return size;
+}
+
+static ssize_t transient_duration_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct led_classdev *led_cdev = dev_get_drvdata(dev);
+ struct transient_trig_data *transient_data = led_cdev->trigger_data;
+
+ return sprintf(buf, "%lu\n", transient_data->duration);
+}
+
+static ssize_t transient_duration_store(struct device *dev,
+ struct device_attribute *attr, const char *buf, size_t size)
+{
+ struct led_classdev *led_cdev = dev_get_drvdata(dev);
+ struct transient_trig_data *transient_data = led_cdev->trigger_data;
+ unsigned long state;
+ ssize_t ret;
+
+ ret = kstrtoul(buf, 10, &state);
+ if (ret)
+ return ret;
+
+ transient_data->duration = state;
+ return size;
+}
+
+static ssize_t transient_state_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct led_classdev *led_cdev = dev_get_drvdata(dev);
+ struct transient_trig_data *transient_data = led_cdev->trigger_data;
+ int state;
+
+ state = (transient_data->state == LED_FULL) ? 1 : 0;
+ return sprintf(buf, "%d\n", state);
+}
+
+static ssize_t transient_state_store(struct device *dev,
+ struct device_attribute *attr, const char *buf, size_t size)
+{
+ struct led_classdev *led_cdev = dev_get_drvdata(dev);
+ struct transient_trig_data *transient_data = led_cdev->trigger_data;
+ unsigned long state;
+ ssize_t ret;
+
+ ret = kstrtoul(buf, 10, &state);
+ if (ret)
+ return ret;
+
+ if (state != 1 && state != 0)
+ return -EINVAL;
+
+ transient_data->state = (state == 1) ? LED_FULL : LED_OFF;
+ return size;
+}
+
+static DEVICE_ATTR(activate, 0644, transient_activate_show,
+ transient_activate_store);
+static DEVICE_ATTR(duration, 0644, transient_duration_show,
+ transient_duration_store);
+static DEVICE_ATTR(state, 0644, transient_state_show, transient_state_store);
+
+static void transient_trig_activate(struct led_classdev *led_cdev)
+{
+ int rc;
+ struct transient_trig_data *tdata;
+
+ tdata = kzalloc(sizeof(struct transient_trig_data), GFP_KERNEL);
+ if (!tdata) {
+ dev_err(led_cdev->dev,
+ "unable to allocate transient trigger\n");
+ return;
+ }
+ led_cdev->trigger_data = tdata;
+
+ rc = device_create_file(led_cdev->dev, &dev_attr_activate);
+ if (rc)
+ goto err_out;
+
+ rc = device_create_file(led_cdev->dev, &dev_attr_duration);
+ if (rc)
+ goto err_out_duration;
+
+ rc = device_create_file(led_cdev->dev, &dev_attr_state);
+ if (rc)
+ goto err_out_state;
+
+ setup_timer(&tdata->timer, transient_timer_function,
+ (unsigned long) led_cdev);
+ led_cdev->activated = true;
+
+ return;
+
+err_out_state:
+ device_remove_file(led_cdev->dev, &dev_attr_duration);
+err_out_duration:
+ device_remove_file(led_cdev->dev, &dev_attr_activate);
+err_out:
+ dev_err(led_cdev->dev, "unable to register transient trigger\n");
+ led_cdev->trigger_data = NULL;
+ kfree(tdata);
+}
+
+static void transient_trig_deactivate(struct led_classdev *led_cdev)
+{
+ struct transient_trig_data *transient_data = led_cdev->trigger_data;
+
+ if (led_cdev->activated) {
+ del_timer_sync(&transient_data->timer);
+ led_set_brightness_async(led_cdev,
+ transient_data->restore_state);
+ device_remove_file(led_cdev->dev, &dev_attr_activate);
+ device_remove_file(led_cdev->dev, &dev_attr_duration);
+ device_remove_file(led_cdev->dev, &dev_attr_state);
+ led_cdev->trigger_data = NULL;
+ led_cdev->activated = false;
+ kfree(transient_data);
+ }
+}
+
+static struct led_trigger transient_trigger = {
+ .name = "transient",
+ .activate = transient_trig_activate,
+ .deactivate = transient_trig_deactivate,
+};
+
+static int __init transient_trig_init(void)
+{
+ return led_trigger_register(&transient_trigger);
+}
+
+static void __exit transient_trig_exit(void)
+{
+ led_trigger_unregister(&transient_trigger);
+}
+
+module_init(transient_trig_init);
+module_exit(transient_trig_exit);
+
+MODULE_AUTHOR("Shuah Khan <shuahkhan@gmail.com>");
+MODULE_DESCRIPTION("Transient LED trigger");
+MODULE_LICENSE("GPL");