diff options
Diffstat (limited to 'kernel/drivers/leds/Kconfig')
| -rw-r--r-- | kernel/drivers/leds/Kconfig | 105 |
1 files changed, 88 insertions, 17 deletions
diff --git a/kernel/drivers/leds/Kconfig b/kernel/drivers/leds/Kconfig index 966b9605f..b1ab8bdf8 100644 --- a/kernel/drivers/leds/Kconfig +++ b/kernel/drivers/leds/Kconfig @@ -11,9 +11,6 @@ menuconfig NEW_LEDS Say Y to enable Linux LED support. This allows control of supported LEDs from both userspace and optionally, by kernel events (triggers). - This is not related to standard keyboard LEDs which are controlled - via the input system. - if NEW_LEDS config LEDS_CLASS @@ -42,6 +39,32 @@ config LEDS_88PM860X This option enables support for on-chip LED drivers found on Marvell Semiconductor 88PM8606 PMIC. +config LEDS_AAT1290 + tristate "LED support for the AAT1290" + depends on LEDS_CLASS_FLASH + depends on V4L2_FLASH_LED_CLASS || !V4L2_FLASH_LED_CLASS + depends on GPIOLIB || COMPILE_TEST + depends on OF + depends on PINCTRL + help + This option enables support for the LEDs on the AAT1290. + +config LEDS_BCM6328 + tristate "LED Support for Broadcom BCM6328" + depends on LEDS_CLASS + depends on OF + help + This option enables support for LEDs connected to the BCM6328 + LED HW controller accessed via MMIO registers. + +config LEDS_BCM6358 + tristate "LED Support for Broadcom BCM6358" + depends on LEDS_CLASS + depends on OF + help + This option enables support for LEDs connected to the BCM6358 + LED HW controller accessed via MMIO registers. + config LEDS_LM3530 tristate "LCD Backlight driver for LM3530" depends on LEDS_CLASS @@ -147,6 +170,7 @@ config LEDS_SUNFIRE config LEDS_IPAQ_MICRO tristate "LED Support for the Compaq iPAQ h3xxx" + depends on LEDS_CLASS depends on MFD_IPAQ_MICRO help Choose this option if you want to use the notification LED on @@ -182,7 +206,7 @@ config LEDS_PCA9532_GPIO config LEDS_GPIO tristate "LED Support for GPIO connected LEDs" depends on LEDS_CLASS - depends on GPIOLIB + depends on GPIOLIB || COMPILE_TEST help This option enables support for the LEDs connected to GPIO outputs. To be useful the particular board must have LEDs @@ -206,6 +230,7 @@ config LEDS_LP55XX_COMMON tristate "Common Driver for TI/National LP5521/5523/55231/5562/8501" depends on LEDS_LP5521 || LEDS_LP5523 || LEDS_LP5562 || LEDS_LP8501 select FW_LOADER + select FW_LOADER_USER_HELPER help This option supports common operations for LP5521/5523/55231/5562/8501 devices. @@ -395,7 +420,7 @@ config LEDS_INTEL_SS4200 config LEDS_LT3593 tristate "LED driver for LT3593 controllers" depends on LEDS_CLASS - depends on GPIOLIB + depends on GPIOLIB || COMPILE_TEST help This option enables support for LEDs driven by a Linear Technology LT3593 controller. This controller uses a special one-wire pulse @@ -431,12 +456,16 @@ config LEDS_MC13783 config LEDS_NS2 tristate "LED support for Network Space v2 GPIO LEDs" depends on LEDS_CLASS - depends on MACH_KIRKWOOD + depends on MACH_KIRKWOOD || MACH_ARMADA_370 default y help - This option enable support for the dual-GPIO LED found on the - Network Space v2 board (and parents). This include Internet Space v2, - Network Space (Max) v2 and d2 Network v2 boards. + This option enables support for the dual-GPIO LEDs found on the + following LaCie/Seagate boards: + + Network Space v2 (and parents: Max, Mini) + Internet Space v2 + d2 Network v2 + n090401 (Seagate NAS 4-Bay) config LEDS_NETXBIG tristate "LED support for Big Network series LEDs" @@ -467,6 +496,25 @@ config LEDS_TCA6507 LED driver chips accessed via the I2C bus. Driver support brightness control and hardware-assisted blinking. +config LEDS_TLC591XX + tristate "LED driver for TLC59108 and TLC59116 controllers" + depends on LEDS_CLASS && I2C + select REGMAP_I2C + help + This option enables support for Texas Instruments TLC59108 + and TLC59116 LED controllers. + +config LEDS_MAX77693 + tristate "LED support for MAX77693 Flash" + depends on LEDS_CLASS_FLASH + depends on V4L2_FLASH_LED_CLASS || !V4L2_FLASH_LED_CLASS + depends on MFD_MAX77693 + depends on OF + help + This option enables support for the flash part of the MAX77693 + multifunction device. It has build in control for two leds in flash + and torch mode. + config LEDS_MAX8997 tristate "LED support for MAX8997 PMIC" depends on LEDS_CLASS && MFD_MAX8997 @@ -498,6 +546,26 @@ config LEDS_MENF21BMC This driver can also be built as a module. If so the module will be called leds-menf21bmc. +config LEDS_KTD2692 + tristate "LED support for KTD2692 flash LED controller" + depends on LEDS_CLASS_FLASH && OF + depends on GPIOLIB || COMPILE_TEST + help + This option enables support for KTD2692 LED flash connected + through ExpressWire interface. + + Say Y to enable this driver. + +config LEDS_SEAD3 + tristate "LED support for the MIPS SEAD 3 board" + depends on LEDS_CLASS && MIPS_SEAD3 + help + Say Y here to include support for the FLED and PLED LEDs on SEAD3 eval + boards. + + This driver can also be built as a module. If so the module + will be called leds-sead3. + comment "LED driver for blink(1) USB RGB LED is under Special HID drivers (HID_THINGM)" config LEDS_BLINKM @@ -508,6 +576,17 @@ config LEDS_BLINKM This option enables support for the BlinkM RGB LED connected through I2C. Say Y to enable support for the BlinkM LED. +config LEDS_POWERNV + tristate "LED support for PowerNV Platform" + depends on LEDS_CLASS + depends on PPC_POWERNV + depends on OF + help + This option enables support for the system LEDs present on + PowerNV platforms. Say 'y' to enable this support in kernel. + To compile this driver as a module, choose 'm' here: the module + will be called leds-powernv. + config LEDS_SYSCON bool "LED support for LEDs on system controllers" depends on LEDS_CLASS=y @@ -526,14 +605,6 @@ config LEDS_VERSATILE This option enabled support for the LEDs on the ARM Versatile and RealView boards. Say Y to enabled these. -config LEDS_PM8941_WLED - tristate "LED support for the Qualcomm PM8941 WLED block" - depends on LEDS_CLASS - select REGMAP - help - This option enables support for the 'White' LED block - on Qualcomm PM8941 PMICs. - comment "LED Triggers" source "drivers/leds/trigger/Kconfig" |