summaryrefslogtreecommitdiffstats
path: root/kernel/drivers/isdn/hisax/elsa_ser.c
diff options
context:
space:
mode:
Diffstat (limited to 'kernel/drivers/isdn/hisax/elsa_ser.c')
-rw-r--r--kernel/drivers/isdn/hisax/elsa_ser.c659
1 files changed, 659 insertions, 0 deletions
diff --git a/kernel/drivers/isdn/hisax/elsa_ser.c b/kernel/drivers/isdn/hisax/elsa_ser.c
new file mode 100644
index 000000000..a2a358c1d
--- /dev/null
+++ b/kernel/drivers/isdn/hisax/elsa_ser.c
@@ -0,0 +1,659 @@
+/* $Id: elsa_ser.c,v 2.14.2.3 2004/02/11 13:21:33 keil Exp $
+ *
+ * stuff for the serial modem on ELSA cards
+ *
+ * This software may be used and distributed according to the terms
+ * of the GNU General Public License, incorporated herein by reference.
+ *
+ */
+
+#include <linux/serial.h>
+#include <linux/serial_reg.h>
+#include <linux/slab.h>
+
+#define MAX_MODEM_BUF 256
+#define WAKEUP_CHARS (MAX_MODEM_BUF / 2)
+#define RS_ISR_PASS_LIMIT 256
+#define BASE_BAUD (1843200 / 16)
+
+//#define SERIAL_DEBUG_OPEN 1
+//#define SERIAL_DEBUG_INTR 1
+//#define SERIAL_DEBUG_FLOW 1
+#undef SERIAL_DEBUG_OPEN
+#undef SERIAL_DEBUG_INTR
+#undef SERIAL_DEBUG_FLOW
+#undef SERIAL_DEBUG_REG
+//#define SERIAL_DEBUG_REG 1
+
+#ifdef SERIAL_DEBUG_REG
+static u_char deb[32];
+const char *ModemIn[] = {"RBR", "IER", "IIR", "LCR", "MCR", "LSR", "MSR", "SCR"};
+const char *ModemOut[] = {"THR", "IER", "FCR", "LCR", "MCR", "LSR", "MSR", "SCR"};
+#endif
+
+static char *MInit_1 = "AT&F&C1E0&D2\r\0";
+static char *MInit_2 = "ATL2M1S64=13\r\0";
+static char *MInit_3 = "AT+FCLASS=0\r\0";
+static char *MInit_4 = "ATV1S2=128X1\r\0";
+static char *MInit_5 = "AT\\V8\\N3\r\0";
+static char *MInit_6 = "ATL0M0&G0%E1\r\0";
+static char *MInit_7 = "AT%L1%M0%C3\r\0";
+
+static char *MInit_speed28800 = "AT%G0%B28800\r\0";
+
+static char *MInit_dialout = "ATs7=60 x1 d\r\0";
+static char *MInit_dialin = "ATs7=60 x1 a\r\0";
+
+
+static inline unsigned int serial_in(struct IsdnCardState *cs, int offset)
+{
+#ifdef SERIAL_DEBUG_REG
+ u_int val = inb(cs->hw.elsa.base + 8 + offset);
+ debugl1(cs, "in %s %02x", ModemIn[offset], val);
+ return (val);
+#else
+ return inb(cs->hw.elsa.base + 8 + offset);
+#endif
+}
+
+static inline unsigned int serial_inp(struct IsdnCardState *cs, int offset)
+{
+#ifdef SERIAL_DEBUG_REG
+#ifdef ELSA_SERIAL_NOPAUSE_IO
+ u_int val = inb(cs->hw.elsa.base + 8 + offset);
+ debugl1(cs, "inp %s %02x", ModemIn[offset], val);
+#else
+ u_int val = inb_p(cs->hw.elsa.base + 8 + offset);
+ debugl1(cs, "inP %s %02x", ModemIn[offset], val);
+#endif
+ return (val);
+#else
+#ifdef ELSA_SERIAL_NOPAUSE_IO
+ return inb(cs->hw.elsa.base + 8 + offset);
+#else
+ return inb_p(cs->hw.elsa.base + 8 + offset);
+#endif
+#endif
+}
+
+static inline void serial_out(struct IsdnCardState *cs, int offset, int value)
+{
+#ifdef SERIAL_DEBUG_REG
+ debugl1(cs, "out %s %02x", ModemOut[offset], value);
+#endif
+ outb(value, cs->hw.elsa.base + 8 + offset);
+}
+
+static inline void serial_outp(struct IsdnCardState *cs, int offset,
+ int value)
+{
+#ifdef SERIAL_DEBUG_REG
+#ifdef ELSA_SERIAL_NOPAUSE_IO
+ debugl1(cs, "outp %s %02x", ModemOut[offset], value);
+#else
+ debugl1(cs, "outP %s %02x", ModemOut[offset], value);
+#endif
+#endif
+#ifdef ELSA_SERIAL_NOPAUSE_IO
+ outb(value, cs->hw.elsa.base + 8 + offset);
+#else
+ outb_p(value, cs->hw.elsa.base + 8 + offset);
+#endif
+}
+
+/*
+ * This routine is called to set the UART divisor registers to match
+ * the specified baud rate for a serial port.
+ */
+static void change_speed(struct IsdnCardState *cs, int baud)
+{
+ int quot = 0, baud_base;
+ unsigned cval, fcr = 0;
+
+
+ /* byte size and parity */
+ cval = 0x03;
+ /* Determine divisor based on baud rate */
+ baud_base = BASE_BAUD;
+ quot = baud_base / baud;
+ /* If the quotient is ever zero, default to 9600 bps */
+ if (!quot)
+ quot = baud_base / 9600;
+
+ /* Set up FIFO's */
+ if ((baud_base / quot) < 2400)
+ fcr = UART_FCR_ENABLE_FIFO | UART_FCR_TRIGGER_1;
+ else
+ fcr = UART_FCR_ENABLE_FIFO | UART_FCR_TRIGGER_8;
+ serial_outp(cs, UART_FCR, fcr);
+ /* CTS flow control flag and modem status interrupts */
+ cs->hw.elsa.IER &= ~UART_IER_MSI;
+ cs->hw.elsa.IER |= UART_IER_MSI;
+ serial_outp(cs, UART_IER, cs->hw.elsa.IER);
+
+ debugl1(cs, "modem quot=0x%x", quot);
+ serial_outp(cs, UART_LCR, cval | UART_LCR_DLAB);/* set DLAB */
+ serial_outp(cs, UART_DLL, quot & 0xff); /* LS of divisor */
+ serial_outp(cs, UART_DLM, quot >> 8); /* MS of divisor */
+ serial_outp(cs, UART_LCR, cval); /* reset DLAB */
+ serial_inp(cs, UART_RX);
+}
+
+static int mstartup(struct IsdnCardState *cs)
+{
+ int retval = 0;
+
+ /*
+ * Clear the FIFO buffers and disable them
+ * (they will be reenabled in change_speed())
+ */
+ serial_outp(cs, UART_FCR, (UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT));
+
+ /*
+ * At this point there's no way the LSR could still be 0xFF;
+ * if it is, then bail out, because there's likely no UART
+ * here.
+ */
+ if (serial_inp(cs, UART_LSR) == 0xff) {
+ retval = -ENODEV;
+ goto errout;
+ }
+
+ /*
+ * Clear the interrupt registers.
+ */
+ (void) serial_inp(cs, UART_RX);
+ (void) serial_inp(cs, UART_IIR);
+ (void) serial_inp(cs, UART_MSR);
+
+ /*
+ * Now, initialize the UART
+ */
+ serial_outp(cs, UART_LCR, UART_LCR_WLEN8); /* reset DLAB */
+
+ cs->hw.elsa.MCR = 0;
+ cs->hw.elsa.MCR = UART_MCR_DTR | UART_MCR_RTS | UART_MCR_OUT2;
+ serial_outp(cs, UART_MCR, cs->hw.elsa.MCR);
+
+ /*
+ * Finally, enable interrupts
+ */
+ cs->hw.elsa.IER = UART_IER_MSI | UART_IER_RLSI | UART_IER_RDI;
+ serial_outp(cs, UART_IER, cs->hw.elsa.IER); /* enable interrupts */
+
+ /*
+ * And clear the interrupt registers again for luck.
+ */
+ (void)serial_inp(cs, UART_LSR);
+ (void)serial_inp(cs, UART_RX);
+ (void)serial_inp(cs, UART_IIR);
+ (void)serial_inp(cs, UART_MSR);
+
+ cs->hw.elsa.transcnt = cs->hw.elsa.transp = 0;
+ cs->hw.elsa.rcvcnt = cs->hw.elsa.rcvp = 0;
+
+ /*
+ * and set the speed of the serial port
+ */
+ change_speed(cs, BASE_BAUD);
+ cs->hw.elsa.MFlag = 1;
+errout:
+ return retval;
+}
+
+/*
+ * This routine will shutdown a serial port; interrupts are disabled, and
+ * DTR is dropped if the hangup on close termio flag is on.
+ */
+static void mshutdown(struct IsdnCardState *cs)
+{
+
+#ifdef SERIAL_DEBUG_OPEN
+ printk(KERN_DEBUG"Shutting down serial ....");
+#endif
+
+ /*
+ * clear delta_msr_wait queue to avoid mem leaks: we may free the irq
+ * here so the queue might never be waken up
+ */
+
+ cs->hw.elsa.IER = 0;
+ serial_outp(cs, UART_IER, 0x00); /* disable all intrs */
+ cs->hw.elsa.MCR &= ~UART_MCR_OUT2;
+
+ /* disable break condition */
+ serial_outp(cs, UART_LCR, serial_inp(cs, UART_LCR) & ~UART_LCR_SBC);
+
+ cs->hw.elsa.MCR &= ~(UART_MCR_DTR | UART_MCR_RTS);
+ serial_outp(cs, UART_MCR, cs->hw.elsa.MCR);
+
+ /* disable FIFO's */
+ serial_outp(cs, UART_FCR, (UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT));
+ serial_inp(cs, UART_RX); /* read data port to reset things */
+
+#ifdef SERIAL_DEBUG_OPEN
+ printk(" done\n");
+#endif
+}
+
+static inline int
+write_modem(struct BCState *bcs) {
+ int ret = 0;
+ struct IsdnCardState *cs = bcs->cs;
+ int count, len, fp;
+
+ if (!bcs->tx_skb)
+ return 0;
+ if (bcs->tx_skb->len <= 0)
+ return 0;
+ len = bcs->tx_skb->len;
+ if (len > MAX_MODEM_BUF - cs->hw.elsa.transcnt)
+ len = MAX_MODEM_BUF - cs->hw.elsa.transcnt;
+ fp = cs->hw.elsa.transcnt + cs->hw.elsa.transp;
+ fp &= (MAX_MODEM_BUF - 1);
+ count = len;
+ if (count > MAX_MODEM_BUF - fp) {
+ count = MAX_MODEM_BUF - fp;
+ skb_copy_from_linear_data(bcs->tx_skb,
+ cs->hw.elsa.transbuf + fp, count);
+ skb_pull(bcs->tx_skb, count);
+ cs->hw.elsa.transcnt += count;
+ ret = count;
+ count = len - count;
+ fp = 0;
+ }
+ skb_copy_from_linear_data(bcs->tx_skb,
+ cs->hw.elsa.transbuf + fp, count);
+ skb_pull(bcs->tx_skb, count);
+ cs->hw.elsa.transcnt += count;
+ ret += count;
+
+ if (cs->hw.elsa.transcnt &&
+ !(cs->hw.elsa.IER & UART_IER_THRI)) {
+ cs->hw.elsa.IER |= UART_IER_THRI;
+ serial_outp(cs, UART_IER, cs->hw.elsa.IER);
+ }
+ return (ret);
+}
+
+static inline void
+modem_fill(struct BCState *bcs) {
+
+ if (bcs->tx_skb) {
+ if (bcs->tx_skb->len) {
+ write_modem(bcs);
+ return;
+ } else {
+ if (test_bit(FLG_LLI_L1WAKEUP, &bcs->st->lli.flag) &&
+ (PACKET_NOACK != bcs->tx_skb->pkt_type)) {
+ u_long flags;
+ spin_lock_irqsave(&bcs->aclock, flags);
+ bcs->ackcnt += bcs->hw.hscx.count;
+ spin_unlock_irqrestore(&bcs->aclock, flags);
+ schedule_event(bcs, B_ACKPENDING);
+ }
+ dev_kfree_skb_any(bcs->tx_skb);
+ bcs->tx_skb = NULL;
+ }
+ }
+ if ((bcs->tx_skb = skb_dequeue(&bcs->squeue))) {
+ bcs->hw.hscx.count = 0;
+ test_and_set_bit(BC_FLG_BUSY, &bcs->Flag);
+ write_modem(bcs);
+ } else {
+ test_and_clear_bit(BC_FLG_BUSY, &bcs->Flag);
+ schedule_event(bcs, B_XMTBUFREADY);
+ }
+}
+
+static inline void receive_chars(struct IsdnCardState *cs,
+ int *status)
+{
+ unsigned char ch;
+ struct sk_buff *skb;
+
+ do {
+ ch = serial_in(cs, UART_RX);
+ if (cs->hw.elsa.rcvcnt >= MAX_MODEM_BUF)
+ break;
+ cs->hw.elsa.rcvbuf[cs->hw.elsa.rcvcnt++] = ch;
+#ifdef SERIAL_DEBUG_INTR
+ printk("DR%02x:%02x...", ch, *status);
+#endif
+ if (*status & (UART_LSR_BI | UART_LSR_PE |
+ UART_LSR_FE | UART_LSR_OE)) {
+
+#ifdef SERIAL_DEBUG_INTR
+ printk("handling exept....");
+#endif
+ }
+ *status = serial_inp(cs, UART_LSR);
+ } while (*status & UART_LSR_DR);
+ if (cs->hw.elsa.MFlag == 2) {
+ if (!(skb = dev_alloc_skb(cs->hw.elsa.rcvcnt)))
+ printk(KERN_WARNING "ElsaSER: receive out of memory\n");
+ else {
+ memcpy(skb_put(skb, cs->hw.elsa.rcvcnt), cs->hw.elsa.rcvbuf,
+ cs->hw.elsa.rcvcnt);
+ skb_queue_tail(&cs->hw.elsa.bcs->rqueue, skb);
+ }
+ schedule_event(cs->hw.elsa.bcs, B_RCVBUFREADY);
+ } else {
+ char tmp[128];
+ char *t = tmp;
+
+ t += sprintf(t, "modem read cnt %d", cs->hw.elsa.rcvcnt);
+ QuickHex(t, cs->hw.elsa.rcvbuf, cs->hw.elsa.rcvcnt);
+ debugl1(cs, "%s", tmp);
+ }
+ cs->hw.elsa.rcvcnt = 0;
+}
+
+static inline void transmit_chars(struct IsdnCardState *cs, int *intr_done)
+{
+ int count;
+
+ debugl1(cs, "transmit_chars: p(%x) cnt(%x)", cs->hw.elsa.transp,
+ cs->hw.elsa.transcnt);
+
+ if (cs->hw.elsa.transcnt <= 0) {
+ cs->hw.elsa.IER &= ~UART_IER_THRI;
+ serial_out(cs, UART_IER, cs->hw.elsa.IER);
+ return;
+ }
+ count = 16;
+ do {
+ serial_outp(cs, UART_TX, cs->hw.elsa.transbuf[cs->hw.elsa.transp++]);
+ if (cs->hw.elsa.transp >= MAX_MODEM_BUF)
+ cs->hw.elsa.transp = 0;
+ if (--cs->hw.elsa.transcnt <= 0)
+ break;
+ } while (--count > 0);
+ if ((cs->hw.elsa.transcnt < WAKEUP_CHARS) && (cs->hw.elsa.MFlag == 2))
+ modem_fill(cs->hw.elsa.bcs);
+
+#ifdef SERIAL_DEBUG_INTR
+ printk("THRE...");
+#endif
+ if (intr_done)
+ *intr_done = 0;
+ if (cs->hw.elsa.transcnt <= 0) {
+ cs->hw.elsa.IER &= ~UART_IER_THRI;
+ serial_outp(cs, UART_IER, cs->hw.elsa.IER);
+ }
+}
+
+
+static void rs_interrupt_elsa(struct IsdnCardState *cs)
+{
+ int status, iir, msr;
+ int pass_counter = 0;
+
+#ifdef SERIAL_DEBUG_INTR
+ printk(KERN_DEBUG "rs_interrupt_single(%d)...", cs->irq);
+#endif
+
+ do {
+ status = serial_inp(cs, UART_LSR);
+ debugl1(cs, "rs LSR %02x", status);
+#ifdef SERIAL_DEBUG_INTR
+ printk("status = %x...", status);
+#endif
+ if (status & UART_LSR_DR)
+ receive_chars(cs, &status);
+ if (status & UART_LSR_THRE)
+ transmit_chars(cs, NULL);
+ if (pass_counter++ > RS_ISR_PASS_LIMIT) {
+ printk("rs_single loop break.\n");
+ break;
+ }
+ iir = serial_inp(cs, UART_IIR);
+ debugl1(cs, "rs IIR %02x", iir);
+ if ((iir & 0xf) == 0) {
+ msr = serial_inp(cs, UART_MSR);
+ debugl1(cs, "rs MSR %02x", msr);
+ }
+ } while (!(iir & UART_IIR_NO_INT));
+#ifdef SERIAL_DEBUG_INTR
+ printk("end.\n");
+#endif
+}
+
+extern int open_hscxstate(struct IsdnCardState *cs, struct BCState *bcs);
+extern void modehscx(struct BCState *bcs, int mode, int bc);
+extern void hscx_l2l1(struct PStack *st, int pr, void *arg);
+
+static void
+close_elsastate(struct BCState *bcs)
+{
+ modehscx(bcs, 0, bcs->channel);
+ if (test_and_clear_bit(BC_FLG_INIT, &bcs->Flag)) {
+ if (bcs->hw.hscx.rcvbuf) {
+ if (bcs->mode != L1_MODE_MODEM)
+ kfree(bcs->hw.hscx.rcvbuf);
+ bcs->hw.hscx.rcvbuf = NULL;
+ }
+ skb_queue_purge(&bcs->rqueue);
+ skb_queue_purge(&bcs->squeue);
+ if (bcs->tx_skb) {
+ dev_kfree_skb_any(bcs->tx_skb);
+ bcs->tx_skb = NULL;
+ test_and_clear_bit(BC_FLG_BUSY, &bcs->Flag);
+ }
+ }
+}
+
+static void
+modem_write_cmd(struct IsdnCardState *cs, u_char *buf, int len) {
+ int count, fp;
+ u_char *msg = buf;
+
+ if (!len)
+ return;
+ if (len > (MAX_MODEM_BUF - cs->hw.elsa.transcnt)) {
+ return;
+ }
+ fp = cs->hw.elsa.transcnt + cs->hw.elsa.transp;
+ fp &= (MAX_MODEM_BUF - 1);
+ count = len;
+ if (count > MAX_MODEM_BUF - fp) {
+ count = MAX_MODEM_BUF - fp;
+ memcpy(cs->hw.elsa.transbuf + fp, msg, count);
+ cs->hw.elsa.transcnt += count;
+ msg += count;
+ count = len - count;
+ fp = 0;
+ }
+ memcpy(cs->hw.elsa.transbuf + fp, msg, count);
+ cs->hw.elsa.transcnt += count;
+ if (cs->hw.elsa.transcnt &&
+ !(cs->hw.elsa.IER & UART_IER_THRI)) {
+ cs->hw.elsa.IER |= UART_IER_THRI;
+ serial_outp(cs, UART_IER, cs->hw.elsa.IER);
+ }
+}
+
+static void
+modem_set_init(struct IsdnCardState *cs) {
+ int timeout;
+
+#define RCV_DELAY 20
+ modem_write_cmd(cs, MInit_1, strlen(MInit_1));
+ timeout = 1000;
+ while (timeout-- && cs->hw.elsa.transcnt)
+ udelay(1000);
+ debugl1(cs, "msi tout=%d", timeout);
+ mdelay(RCV_DELAY);
+ modem_write_cmd(cs, MInit_2, strlen(MInit_2));
+ timeout = 1000;
+ while (timeout-- && cs->hw.elsa.transcnt)
+ udelay(1000);
+ debugl1(cs, "msi tout=%d", timeout);
+ mdelay(RCV_DELAY);
+ modem_write_cmd(cs, MInit_3, strlen(MInit_3));
+ timeout = 1000;
+ while (timeout-- && cs->hw.elsa.transcnt)
+ udelay(1000);
+ debugl1(cs, "msi tout=%d", timeout);
+ mdelay(RCV_DELAY);
+ modem_write_cmd(cs, MInit_4, strlen(MInit_4));
+ timeout = 1000;
+ while (timeout-- && cs->hw.elsa.transcnt)
+ udelay(1000);
+ debugl1(cs, "msi tout=%d", timeout);
+ mdelay(RCV_DELAY);
+ modem_write_cmd(cs, MInit_5, strlen(MInit_5));
+ timeout = 1000;
+ while (timeout-- && cs->hw.elsa.transcnt)
+ udelay(1000);
+ debugl1(cs, "msi tout=%d", timeout);
+ mdelay(RCV_DELAY);
+ modem_write_cmd(cs, MInit_6, strlen(MInit_6));
+ timeout = 1000;
+ while (timeout-- && cs->hw.elsa.transcnt)
+ udelay(1000);
+ debugl1(cs, "msi tout=%d", timeout);
+ mdelay(RCV_DELAY);
+ modem_write_cmd(cs, MInit_7, strlen(MInit_7));
+ timeout = 1000;
+ while (timeout-- && cs->hw.elsa.transcnt)
+ udelay(1000);
+ debugl1(cs, "msi tout=%d", timeout);
+ mdelay(RCV_DELAY);
+}
+
+static void
+modem_set_dial(struct IsdnCardState *cs, int outgoing) {
+ int timeout;
+#define RCV_DELAY 20
+
+ modem_write_cmd(cs, MInit_speed28800, strlen(MInit_speed28800));
+ timeout = 1000;
+ while (timeout-- && cs->hw.elsa.transcnt)
+ udelay(1000);
+ debugl1(cs, "msi tout=%d", timeout);
+ mdelay(RCV_DELAY);
+ if (outgoing)
+ modem_write_cmd(cs, MInit_dialout, strlen(MInit_dialout));
+ else
+ modem_write_cmd(cs, MInit_dialin, strlen(MInit_dialin));
+ timeout = 1000;
+ while (timeout-- && cs->hw.elsa.transcnt)
+ udelay(1000);
+ debugl1(cs, "msi tout=%d", timeout);
+ mdelay(RCV_DELAY);
+}
+
+static void
+modem_l2l1(struct PStack *st, int pr, void *arg)
+{
+ struct BCState *bcs = st->l1.bcs;
+ struct sk_buff *skb = arg;
+ u_long flags;
+
+ if (pr == (PH_DATA | REQUEST)) {
+ spin_lock_irqsave(&bcs->cs->lock, flags);
+ if (bcs->tx_skb) {
+ skb_queue_tail(&bcs->squeue, skb);
+ } else {
+ bcs->tx_skb = skb;
+ test_and_set_bit(BC_FLG_BUSY, &bcs->Flag);
+ bcs->hw.hscx.count = 0;
+ write_modem(bcs);
+ }
+ spin_unlock_irqrestore(&bcs->cs->lock, flags);
+ } else if (pr == (PH_ACTIVATE | REQUEST)) {
+ test_and_set_bit(BC_FLG_ACTIV, &bcs->Flag);
+ st->l1.l1l2(st, PH_ACTIVATE | CONFIRM, NULL);
+ set_arcofi(bcs->cs, st->l1.bc);
+ mstartup(bcs->cs);
+ modem_set_dial(bcs->cs, test_bit(FLG_ORIG, &st->l2.flag));
+ bcs->cs->hw.elsa.MFlag = 2;
+ } else if (pr == (PH_DEACTIVATE | REQUEST)) {
+ test_and_clear_bit(BC_FLG_ACTIV, &bcs->Flag);
+ bcs->cs->dc.isac.arcofi_bc = st->l1.bc;
+ arcofi_fsm(bcs->cs, ARCOFI_START, &ARCOFI_XOP_0);
+ wait_event_interruptible(bcs->cs->dc.isac.arcofi_wait,
+ bcs->cs->dc.isac.arcofi_state == ARCOFI_NOP);
+ bcs->cs->hw.elsa.MFlag = 1;
+ } else {
+ printk(KERN_WARNING "ElsaSer: unknown pr %x\n", pr);
+ }
+}
+
+static int
+setstack_elsa(struct PStack *st, struct BCState *bcs)
+{
+
+ bcs->channel = st->l1.bc;
+ switch (st->l1.mode) {
+ case L1_MODE_HDLC:
+ case L1_MODE_TRANS:
+ if (open_hscxstate(st->l1.hardware, bcs))
+ return (-1);
+ st->l2.l2l1 = hscx_l2l1;
+ break;
+ case L1_MODE_MODEM:
+ bcs->mode = L1_MODE_MODEM;
+ if (!test_and_set_bit(BC_FLG_INIT, &bcs->Flag)) {
+ bcs->hw.hscx.rcvbuf = bcs->cs->hw.elsa.rcvbuf;
+ skb_queue_head_init(&bcs->rqueue);
+ skb_queue_head_init(&bcs->squeue);
+ }
+ bcs->tx_skb = NULL;
+ test_and_clear_bit(BC_FLG_BUSY, &bcs->Flag);
+ bcs->event = 0;
+ bcs->hw.hscx.rcvidx = 0;
+ bcs->tx_cnt = 0;
+ bcs->cs->hw.elsa.bcs = bcs;
+ st->l2.l2l1 = modem_l2l1;
+ break;
+ }
+ st->l1.bcs = bcs;
+ setstack_manager(st);
+ bcs->st = st;
+ setstack_l1_B(st);
+ return (0);
+}
+
+static void
+init_modem(struct IsdnCardState *cs) {
+
+ cs->bcs[0].BC_SetStack = setstack_elsa;
+ cs->bcs[1].BC_SetStack = setstack_elsa;
+ cs->bcs[0].BC_Close = close_elsastate;
+ cs->bcs[1].BC_Close = close_elsastate;
+ if (!(cs->hw.elsa.rcvbuf = kmalloc(MAX_MODEM_BUF,
+ GFP_ATOMIC))) {
+ printk(KERN_WARNING
+ "Elsa: No modem mem hw.elsa.rcvbuf\n");
+ return;
+ }
+ if (!(cs->hw.elsa.transbuf = kmalloc(MAX_MODEM_BUF,
+ GFP_ATOMIC))) {
+ printk(KERN_WARNING
+ "Elsa: No modem mem hw.elsa.transbuf\n");
+ kfree(cs->hw.elsa.rcvbuf);
+ cs->hw.elsa.rcvbuf = NULL;
+ return;
+ }
+ if (mstartup(cs)) {
+ printk(KERN_WARNING "Elsa: problem startup modem\n");
+ }
+ modem_set_init(cs);
+}
+
+static void
+release_modem(struct IsdnCardState *cs) {
+
+ cs->hw.elsa.MFlag = 0;
+ if (cs->hw.elsa.transbuf) {
+ if (cs->hw.elsa.rcvbuf) {
+ mshutdown(cs);
+ kfree(cs->hw.elsa.rcvbuf);
+ cs->hw.elsa.rcvbuf = NULL;
+ }
+ kfree(cs->hw.elsa.transbuf);
+ cs->hw.elsa.transbuf = NULL;
+ }
+}