summaryrefslogtreecommitdiffstats
path: root/kernel/drivers/isdn/gigaset/Kconfig
diff options
context:
space:
mode:
Diffstat (limited to 'kernel/drivers/isdn/gigaset/Kconfig')
-rw-r--r--kernel/drivers/isdn/gigaset/Kconfig70
1 files changed, 70 insertions, 0 deletions
diff --git a/kernel/drivers/isdn/gigaset/Kconfig b/kernel/drivers/isdn/gigaset/Kconfig
new file mode 100644
index 000000000..83f62b8d8
--- /dev/null
+++ b/kernel/drivers/isdn/gigaset/Kconfig
@@ -0,0 +1,70 @@
+menuconfig ISDN_DRV_GIGASET
+ tristate "Siemens Gigaset support"
+ depends on TTY
+ select CRC_CCITT
+ select BITREVERSE
+ help
+ This driver supports the Siemens Gigaset SX205/255 family of
+ ISDN DECT bases, including the predecessors Gigaset 3070/3075
+ and 4170/4175 and their T-Com versions Sinus 45isdn and Sinus
+ 721X.
+ If you have one of these devices, say M here and for at least
+ one of the connection specific parts that follow.
+ This will build a module called "gigaset".
+ Note: If you build your ISDN subsystem (ISDN_CAPI or ISDN_I4L)
+ as a module, you have to build this driver as a module too,
+ otherwise the Gigaset device won't show up as an ISDN device.
+
+if ISDN_DRV_GIGASET
+
+config GIGASET_CAPI
+ bool "Gigaset CAPI support"
+ depends on ISDN_CAPI='y'||(ISDN_CAPI='m'&&ISDN_DRV_GIGASET='m')
+ default 'y'
+ help
+ Build the Gigaset driver as a CAPI 2.0 driver interfacing with
+ the Kernel CAPI subsystem. To use it with the old ISDN4Linux
+ subsystem you'll have to enable the capidrv glue driver.
+ (select ISDN_CAPI_CAPIDRV.)
+ Say N to build the old native ISDN4Linux variant.
+ If unsure, say Y.
+
+config GIGASET_I4L
+ bool
+ depends on ISDN_I4L='y'||(ISDN_I4L='m'&&ISDN_DRV_GIGASET='m')
+ default !GIGASET_CAPI
+
+config GIGASET_DUMMYLL
+ bool
+ default !GIGASET_CAPI&&!GIGASET_I4L
+
+config GIGASET_BASE
+ tristate "Gigaset base station support"
+ depends on USB
+ help
+ Say M here if you want to use the USB interface of the Gigaset
+ base for connection to your system.
+ This will build a module called "bas_gigaset".
+
+config GIGASET_M105
+ tristate "Gigaset M105 support"
+ depends on USB
+ help
+ Say M here if you want to connect to the Gigaset base via DECT
+ using a Gigaset M105 (Sinus 45 Data 2) USB DECT device.
+ This will build a module called "usb_gigaset".
+
+config GIGASET_M101
+ tristate "Gigaset M101 support"
+ help
+ Say M here if you want to connect to the Gigaset base via DECT
+ using a Gigaset M101 (Sinus 45 Data 1) RS232 DECT device.
+ This will build a module called "ser_gigaset".
+
+config GIGASET_DEBUG
+ bool "Gigaset debugging"
+ help
+ This enables debugging code in the Gigaset drivers.
+ If in doubt, say yes.
+
+endif # ISDN_DRV_GIGASET