1 files changed, 20 insertions, 21 deletions

diff --git a/kernel/drivers/irqchip/irq-gic-common.c b/kernel/drivers/irqchip/irq-gic-common.c
index ad96ebb0c..f174ce0ca 100644
--- a/kernel/drivers/irqchip/irq-gic-common.c
+++ b/kernel/drivers/irqchip/irq-gic-common.c
@@ -21,14 +21,22 @@
 
 #include "irq-gic-common.h"
 
+void gic_enable_quirks(u32 iidr, const struct gic_quirk *quirks,
+		void *data)
+{
+	for (; quirks->desc; quirks++) {
+		if (quirks->iidr != (quirks->mask & iidr))
+			continue;
+		quirks->init(data);
+		pr_info("GIC: enabling workaround for %s\n", quirks->desc);
+	}
+}
+
 int gic_configure_irq(unsigned int irq, unsigned int type,
 		       void __iomem *base, void (*sync_access)(void))
 {
-	u32 enablemask = 1 << (irq % 32);
-	u32 enableoff = (irq / 32) * 4;
 	u32 confmask = 0x2 << ((irq % 16) * 2);
 	u32 confoff = (irq / 16) * 4;
-	bool enabled = false;
 	u32 val, oldval;
 	int ret = 0;
 
@@ -43,17 +51,6 @@ int gic_configure_irq(unsigned int irq, unsigned int type,
 		val |= confmask;
 
 	/*
-	 * As recommended by the spec, disable the interrupt before changing
-	 * the configuration
-	 */
-	if (readl_relaxed(base + GIC_DIST_ENABLE_SET + enableoff) & enablemask) {
-		writel_relaxed(enablemask, base + GIC_DIST_ENABLE_CLEAR + enableoff);
-		if (sync_access)
-			sync_access();
-		enabled = true;
-	}
-
-	/*
 	 * Write back the new configuration, and possibly re-enable
 	 * the interrupt. If we tried to write a new configuration and failed,
 	 * return an error.
@@ -62,9 +59,6 @@ int gic_configure_irq(unsigned int irq, unsigned int type,
 	if (readl_relaxed(base + GIC_DIST_CONFIG + confoff) != val && val != oldval)
 		ret = -EINVAL;
 
-	if (enabled)
-		writel_relaxed(enablemask, base + GIC_DIST_ENABLE_SET + enableoff);
-
 	if (sync_access)
 		sync_access();
 
@@ -90,12 +84,15 @@ void __init gic_dist_config(void __iomem *base, int gic_irqs,
 		writel_relaxed(GICD_INT_DEF_PRI_X4, base + GIC_DIST_PRI + i);
 
 	/*
-	 * Disable all interrupts.  Leave the PPI and SGIs alone
-	 * as they are enabled by redistributor registers.
+	 * Deactivate and disable all SPIs. Leave the PPI and SGIs
+	 * alone as they are in the redistributor registers on GICv3.
 	 */
-	for (i = 32; i < gic_irqs; i += 32)
+	for (i = 32; i < gic_irqs; i += 32) {
 		writel_relaxed(GICD_INT_EN_CLR_X32,
-					base + GIC_DIST_ENABLE_CLEAR + i / 8);
+			       base + GIC_DIST_ACTIVE_CLEAR + i / 8);
+		writel_relaxed(GICD_INT_EN_CLR_X32,
+			       base + GIC_DIST_ENABLE_CLEAR + i / 8);
+	}
 
 	if (sync_access)
 		sync_access();
@@ -108,7 +105,9 @@ void gic_cpu_config(void __iomem *base, void (*sync_access)(void))
 	/*
 	 * Deal with the banked PPI and SGI interrupts - disable all
 	 * PPI interrupts, ensure all SGI interrupts are enabled.
+	 * Make sure everything is deactivated.
 	 */
+	writel_relaxed(GICD_INT_EN_CLR_X32, base + GIC_DIST_ACTIVE_CLEAR);
 	writel_relaxed(GICD_INT_EN_CLR_PPI, base + GIC_DIST_ENABLE_CLEAR);
 	writel_relaxed(GICD_INT_EN_SET_SGI, base + GIC_DIST_ENABLE_SET);