summaryrefslogtreecommitdiffstats
path: root/kernel/drivers/input/touchscreen/inexio.c
diff options
context:
space:
mode:
Diffstat (limited to 'kernel/drivers/input/touchscreen/inexio.c')
-rw-r--r--kernel/drivers/input/touchscreen/inexio.c191
1 files changed, 191 insertions, 0 deletions
diff --git a/kernel/drivers/input/touchscreen/inexio.c b/kernel/drivers/input/touchscreen/inexio.c
new file mode 100644
index 000000000..adb80b65a
--- /dev/null
+++ b/kernel/drivers/input/touchscreen/inexio.c
@@ -0,0 +1,191 @@
+/*
+ * iNexio serial touchscreen driver
+ *
+ * Copyright (c) 2008 Richard Lemon
+ * Based on the mtouch driver (c) Vojtech Pavlik and Dan Streetman
+ *
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+
+/*
+ * 2008/06/19 Richard Lemon <richard@codelemon.com>
+ * Copied mtouch.c and edited for iNexio protocol
+ */
+
+#include <linux/errno.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/input.h>
+#include <linux/serio.h>
+
+#define DRIVER_DESC "iNexio serial touchscreen driver"
+
+MODULE_AUTHOR("Richard Lemon <richard@codelemon.com>");
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL");
+
+/*
+ * Definitions & global arrays.
+ */
+
+#define INEXIO_FORMAT_TOUCH_BIT 0x01
+#define INEXIO_FORMAT_LENGTH 5
+#define INEXIO_RESPONSE_BEGIN_BYTE 0x80
+
+/* todo: check specs for max length of all responses */
+#define INEXIO_MAX_LENGTH 16
+
+#define INEXIO_MIN_XC 0
+#define INEXIO_MAX_XC 0x3fff
+#define INEXIO_MIN_YC 0
+#define INEXIO_MAX_YC 0x3fff
+
+#define INEXIO_GET_XC(data) (((data[1])<<7) | data[2])
+#define INEXIO_GET_YC(data) (((data[3])<<7) | data[4])
+#define INEXIO_GET_TOUCHED(data) (INEXIO_FORMAT_TOUCH_BIT & data[0])
+
+/*
+ * Per-touchscreen data.
+ */
+
+struct inexio {
+ struct input_dev *dev;
+ struct serio *serio;
+ int idx;
+ unsigned char data[INEXIO_MAX_LENGTH];
+ char phys[32];
+};
+
+static void inexio_process_data(struct inexio *pinexio)
+{
+ struct input_dev *dev = pinexio->dev;
+
+ if (INEXIO_FORMAT_LENGTH == ++pinexio->idx) {
+ input_report_abs(dev, ABS_X, INEXIO_GET_XC(pinexio->data));
+ input_report_abs(dev, ABS_Y, INEXIO_GET_YC(pinexio->data));
+ input_report_key(dev, BTN_TOUCH, INEXIO_GET_TOUCHED(pinexio->data));
+ input_sync(dev);
+
+ pinexio->idx = 0;
+ }
+}
+
+static irqreturn_t inexio_interrupt(struct serio *serio,
+ unsigned char data, unsigned int flags)
+{
+ struct inexio* pinexio = serio_get_drvdata(serio);
+
+ pinexio->data[pinexio->idx] = data;
+
+ if (INEXIO_RESPONSE_BEGIN_BYTE&pinexio->data[0])
+ inexio_process_data(pinexio);
+ else
+ printk(KERN_DEBUG "inexio.c: unknown/unsynchronized data from device, byte %x\n",pinexio->data[0]);
+
+ return IRQ_HANDLED;
+}
+
+/*
+ * inexio_disconnect() is the opposite of inexio_connect()
+ */
+
+static void inexio_disconnect(struct serio *serio)
+{
+ struct inexio* pinexio = serio_get_drvdata(serio);
+
+ input_get_device(pinexio->dev);
+ input_unregister_device(pinexio->dev);
+ serio_close(serio);
+ serio_set_drvdata(serio, NULL);
+ input_put_device(pinexio->dev);
+ kfree(pinexio);
+}
+
+/*
+ * inexio_connect() is the routine that is called when someone adds a
+ * new serio device that supports iNexio protocol and registers it as
+ * an input device. This is usually accomplished using inputattach.
+ */
+
+static int inexio_connect(struct serio *serio, struct serio_driver *drv)
+{
+ struct inexio *pinexio;
+ struct input_dev *input_dev;
+ int err;
+
+ pinexio = kzalloc(sizeof(struct inexio), GFP_KERNEL);
+ input_dev = input_allocate_device();
+ if (!pinexio || !input_dev) {
+ err = -ENOMEM;
+ goto fail1;
+ }
+
+ pinexio->serio = serio;
+ pinexio->dev = input_dev;
+ snprintf(pinexio->phys, sizeof(pinexio->phys), "%s/input0", serio->phys);
+
+ input_dev->name = "iNexio Serial TouchScreen";
+ input_dev->phys = pinexio->phys;
+ input_dev->id.bustype = BUS_RS232;
+ input_dev->id.vendor = SERIO_INEXIO;
+ input_dev->id.product = 0;
+ input_dev->id.version = 0x0001;
+ input_dev->dev.parent = &serio->dev;
+ input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
+ input_dev->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH);
+ input_set_abs_params(pinexio->dev, ABS_X, INEXIO_MIN_XC, INEXIO_MAX_XC, 0, 0);
+ input_set_abs_params(pinexio->dev, ABS_Y, INEXIO_MIN_YC, INEXIO_MAX_YC, 0, 0);
+
+ serio_set_drvdata(serio, pinexio);
+
+ err = serio_open(serio, drv);
+ if (err)
+ goto fail2;
+
+ err = input_register_device(pinexio->dev);
+ if (err)
+ goto fail3;
+
+ return 0;
+
+ fail3: serio_close(serio);
+ fail2: serio_set_drvdata(serio, NULL);
+ fail1: input_free_device(input_dev);
+ kfree(pinexio);
+ return err;
+}
+
+/*
+ * The serio driver structure.
+ */
+
+static struct serio_device_id inexio_serio_ids[] = {
+ {
+ .type = SERIO_RS232,
+ .proto = SERIO_INEXIO,
+ .id = SERIO_ANY,
+ .extra = SERIO_ANY,
+ },
+ { 0 }
+};
+
+MODULE_DEVICE_TABLE(serio, inexio_serio_ids);
+
+static struct serio_driver inexio_drv = {
+ .driver = {
+ .name = "inexio",
+ },
+ .description = DRIVER_DESC,
+ .id_table = inexio_serio_ids,
+ .interrupt = inexio_interrupt,
+ .connect = inexio_connect,
+ .disconnect = inexio_disconnect,
+};
+
+module_serio_driver(inexio_drv);