summaryrefslogtreecommitdiffstats
path: root/kernel/drivers/input/touchscreen/elants_i2c.c
diff options
context:
space:
mode:
Diffstat (limited to 'kernel/drivers/input/touchscreen/elants_i2c.c')
-rw-r--r--kernel/drivers/input/touchscreen/elants_i2c.c197
1 files changed, 169 insertions, 28 deletions
diff --git a/kernel/drivers/input/touchscreen/elants_i2c.c b/kernel/drivers/input/touchscreen/elants_i2c.c
index 0efd766a5..ac09855fa 100644
--- a/kernel/drivers/input/touchscreen/elants_i2c.c
+++ b/kernel/drivers/input/touchscreen/elants_i2c.c
@@ -38,6 +38,8 @@
#include <linux/input/mt.h>
#include <linux/acpi.h>
#include <linux/of.h>
+#include <linux/gpio/consumer.h>
+#include <linux/regulator/consumer.h>
#include <asm/unaligned.h>
/* Device, Driver information */
@@ -100,7 +102,10 @@
#define ELAN_FW_PAGESIZE 132
/* calibration timeout definition */
-#define ELAN_CALI_TIMEOUT_MSEC 10000
+#define ELAN_CALI_TIMEOUT_MSEC 12000
+
+#define ELAN_POWERON_DELAY_USEC 500
+#define ELAN_RESET_DELAY_MSEC 20
enum elants_state {
ELAN_STATE_NORMAL,
@@ -118,6 +123,10 @@ struct elants_data {
struct i2c_client *client;
struct input_dev *input;
+ struct regulator *vcc33;
+ struct regulator *vccio;
+ struct gpio_desc *reset_gpio;
+
u16 fw_version;
u8 test_version;
u8 solution_version;
@@ -141,6 +150,7 @@ struct elants_data {
u8 buf[MAX_PACKET_SIZE];
bool wake_irq_enabled;
+ bool keep_power_in_suspend;
};
static int elants_i2c_send(struct i2c_client *client,
@@ -605,6 +615,7 @@ static int elants_i2c_do_update_firmware(struct i2c_client *client,
const u8 enter_iap[] = { 0x45, 0x49, 0x41, 0x50 };
const u8 enter_iap2[] = { 0x54, 0x00, 0x12, 0x34 };
const u8 iap_ack[] = { 0x55, 0xaa, 0x33, 0xcc };
+ const u8 close_idle[] = {0x54, 0x2c, 0x01, 0x01};
u8 buf[HEADER_SIZE];
u16 send_id;
int page, n_fw_pages;
@@ -617,8 +628,13 @@ static int elants_i2c_do_update_firmware(struct i2c_client *client,
} else {
/* Start IAP Procedure */
dev_dbg(&client->dev, "Normal IAP procedure\n");
+ /* Close idle mode */
+ error = elants_i2c_send(client, close_idle, sizeof(close_idle));
+ if (error)
+ dev_err(&client->dev, "Failed close idle: %d\n", error);
+ msleep(60);
elants_i2c_sw_reset(client);
-
+ msleep(20);
error = elants_i2c_send(client, enter_iap, sizeof(enter_iap));
}
@@ -1052,6 +1068,67 @@ static void elants_i2c_remove_sysfs_group(void *_data)
sysfs_remove_group(&ts->client->dev.kobj, &elants_attribute_group);
}
+static int elants_i2c_power_on(struct elants_data *ts)
+{
+ int error;
+
+ /*
+ * If we do not have reset gpio assume platform firmware
+ * controls regulators and does power them on for us.
+ */
+ if (IS_ERR_OR_NULL(ts->reset_gpio))
+ return 0;
+
+ gpiod_set_value_cansleep(ts->reset_gpio, 1);
+
+ error = regulator_enable(ts->vcc33);
+ if (error) {
+ dev_err(&ts->client->dev,
+ "failed to enable vcc33 regulator: %d\n",
+ error);
+ goto release_reset_gpio;
+ }
+
+ error = regulator_enable(ts->vccio);
+ if (error) {
+ dev_err(&ts->client->dev,
+ "failed to enable vccio regulator: %d\n",
+ error);
+ regulator_disable(ts->vcc33);
+ goto release_reset_gpio;
+ }
+
+ /*
+ * We need to wait a bit after powering on controller before
+ * we are allowed to release reset GPIO.
+ */
+ udelay(ELAN_POWERON_DELAY_USEC);
+
+release_reset_gpio:
+ gpiod_set_value_cansleep(ts->reset_gpio, 0);
+ if (error)
+ return error;
+
+ msleep(ELAN_RESET_DELAY_MSEC);
+
+ return 0;
+}
+
+static void elants_i2c_power_off(void *_data)
+{
+ struct elants_data *ts = _data;
+
+ if (!IS_ERR_OR_NULL(ts->reset_gpio)) {
+ /*
+ * Activate reset gpio to prevent leakage through the
+ * pin once we shut off power to the controller.
+ */
+ gpiod_set_value_cansleep(ts->reset_gpio, 1);
+ regulator_disable(ts->vccio);
+ regulator_disable(ts->vcc33);
+ }
+}
+
static int elants_i2c_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
@@ -1066,13 +1143,6 @@ static int elants_i2c_probe(struct i2c_client *client,
return -ENXIO;
}
- /* Make sure there is something at this address */
- if (i2c_smbus_xfer(client->adapter, client->addr, 0,
- I2C_SMBUS_READ, 0, I2C_SMBUS_BYTE, &dummy) < 0) {
- dev_err(&client->dev, "nothing at this address\n");
- return -ENXIO;
- }
-
ts = devm_kzalloc(&client->dev, sizeof(struct elants_data), GFP_KERNEL);
if (!ts)
return -ENOMEM;
@@ -1083,6 +1153,62 @@ static int elants_i2c_probe(struct i2c_client *client,
ts->client = client;
i2c_set_clientdata(client, ts);
+ ts->vcc33 = devm_regulator_get(&client->dev, "vcc33");
+ if (IS_ERR(ts->vcc33)) {
+ error = PTR_ERR(ts->vcc33);
+ if (error != -EPROBE_DEFER)
+ dev_err(&client->dev,
+ "Failed to get 'vcc33' regulator: %d\n",
+ error);
+ return error;
+ }
+
+ ts->vccio = devm_regulator_get(&client->dev, "vccio");
+ if (IS_ERR(ts->vccio)) {
+ error = PTR_ERR(ts->vccio);
+ if (error != -EPROBE_DEFER)
+ dev_err(&client->dev,
+ "Failed to get 'vccio' regulator: %d\n",
+ error);
+ return error;
+ }
+
+ ts->reset_gpio = devm_gpiod_get(&client->dev, "reset", GPIOD_OUT_LOW);
+ if (IS_ERR(ts->reset_gpio)) {
+ error = PTR_ERR(ts->reset_gpio);
+
+ if (error == -EPROBE_DEFER)
+ return error;
+
+ if (error != -ENOENT && error != -ENOSYS) {
+ dev_err(&client->dev,
+ "failed to get reset gpio: %d\n",
+ error);
+ return error;
+ }
+
+ ts->keep_power_in_suspend = true;
+ }
+
+ error = elants_i2c_power_on(ts);
+ if (error)
+ return error;
+
+ error = devm_add_action(&client->dev, elants_i2c_power_off, ts);
+ if (error) {
+ dev_err(&client->dev,
+ "failed to install power off action: %d\n", error);
+ elants_i2c_power_off(ts);
+ return error;
+ }
+
+ /* Make sure there is something at this address */
+ if (i2c_smbus_xfer(client->adapter, client->addr, 0,
+ I2C_SMBUS_READ, 0, I2C_SMBUS_BYTE, &dummy) < 0) {
+ dev_err(&client->dev, "nothing at this address\n");
+ return -ENXIO;
+ }
+
error = elants_i2c_initialize(ts);
if (error) {
dev_err(&client->dev, "failed to initialize: %d\n", error);
@@ -1190,18 +1316,26 @@ static int __maybe_unused elants_i2c_suspend(struct device *dev)
disable_irq(client->irq);
- for (retry_cnt = 0; retry_cnt < MAX_RETRIES; retry_cnt++) {
- error = elants_i2c_send(client, set_sleep_cmd,
- sizeof(set_sleep_cmd));
- if (!error)
- break;
+ if (device_may_wakeup(dev)) {
+ /*
+ * The device will automatically enter idle mode
+ * that has reduced power consumption.
+ */
+ ts->wake_irq_enabled = (enable_irq_wake(client->irq) == 0);
+ } else if (ts->keep_power_in_suspend) {
+ for (retry_cnt = 0; retry_cnt < MAX_RETRIES; retry_cnt++) {
+ error = elants_i2c_send(client, set_sleep_cmd,
+ sizeof(set_sleep_cmd));
+ if (!error)
+ break;
- dev_err(&client->dev, "suspend command failed: %d\n", error);
+ dev_err(&client->dev,
+ "suspend command failed: %d\n", error);
+ }
+ } else {
+ elants_i2c_power_off(ts);
}
- if (device_may_wakeup(dev))
- ts->wake_irq_enabled = (enable_irq_wake(client->irq) == 0);
-
return 0;
}
@@ -1213,16 +1347,23 @@ static int __maybe_unused elants_i2c_resume(struct device *dev)
int retry_cnt;
int error;
- if (device_may_wakeup(dev) && ts->wake_irq_enabled)
- disable_irq_wake(client->irq);
-
- for (retry_cnt = 0; retry_cnt < MAX_RETRIES; retry_cnt++) {
- error = elants_i2c_send(client, set_active_cmd,
- sizeof(set_active_cmd));
- if (!error)
- break;
+ if (device_may_wakeup(dev)) {
+ if (ts->wake_irq_enabled)
+ disable_irq_wake(client->irq);
+ elants_i2c_sw_reset(client);
+ } else if (ts->keep_power_in_suspend) {
+ for (retry_cnt = 0; retry_cnt < MAX_RETRIES; retry_cnt++) {
+ error = elants_i2c_send(client, set_active_cmd,
+ sizeof(set_active_cmd));
+ if (!error)
+ break;
- dev_err(&client->dev, "resume command failed: %d\n", error);
+ dev_err(&client->dev,
+ "resume command failed: %d\n", error);
+ }
+ } else {
+ elants_i2c_power_on(ts);
+ elants_i2c_initialize(ts);
}
ts->state = ELAN_STATE_NORMAL;
@@ -1261,10 +1402,10 @@ static struct i2c_driver elants_i2c_driver = {
.id_table = elants_i2c_id,
.driver = {
.name = DEVICE_NAME,
- .owner = THIS_MODULE,
.pm = &elants_i2c_pm_ops,
.acpi_match_table = ACPI_PTR(elants_acpi_id),
.of_match_table = of_match_ptr(elants_of_match),
+ .probe_type = PROBE_PREFER_ASYNCHRONOUS,
},
};
module_i2c_driver(elants_i2c_driver);