summaryrefslogtreecommitdiffstats
path: root/kernel/drivers/input/touchscreen/Kconfig
diff options
context:
space:
mode:
Diffstat (limited to 'kernel/drivers/input/touchscreen/Kconfig')
-rw-r--r--kernel/drivers/input/touchscreen/Kconfig1030
1 files changed, 1030 insertions, 0 deletions
diff --git a/kernel/drivers/input/touchscreen/Kconfig b/kernel/drivers/input/touchscreen/Kconfig
new file mode 100644
index 000000000..80f638670
--- /dev/null
+++ b/kernel/drivers/input/touchscreen/Kconfig
@@ -0,0 +1,1030 @@
+#
+# Touchscreen driver configuration
+#
+menuconfig INPUT_TOUCHSCREEN
+ bool "Touchscreens"
+ help
+ Say Y here, and a list of supported touchscreens will be displayed.
+ This option doesn't affect the kernel.
+
+ If unsure, say Y.
+
+if INPUT_TOUCHSCREEN
+
+config OF_TOUCHSCREEN
+ def_tristate INPUT
+ depends on INPUT && OF
+
+config TOUCHSCREEN_88PM860X
+ tristate "Marvell 88PM860x touchscreen"
+ depends on MFD_88PM860X
+ help
+ Say Y here if you have a 88PM860x PMIC and want to enable
+ support for the built-in touchscreen.
+
+ If unsure, say N.
+
+ To compile this driver as a module, choose M here: the
+ module will be called 88pm860x-ts.
+
+config TOUCHSCREEN_ADS7846
+ tristate "ADS7846/TSC2046/AD7873 and AD(S)7843 based touchscreens"
+ depends on SPI_MASTER
+ depends on HWMON = n || HWMON
+ help
+ Say Y here if you have a touchscreen interface using the
+ ADS7846/TSC2046/AD7873 or ADS7843/AD7843 controller,
+ and your board-specific setup code includes that in its
+ table of SPI devices.
+
+ If HWMON is selected, and the driver is told the reference voltage
+ on your board, you will also get hwmon interfaces for the voltage
+ (and on ads7846/tsc2046/ad7873, temperature) sensors of this chip.
+
+ If unsure, say N (but it's safe to say "Y").
+
+ To compile this driver as a module, choose M here: the
+ module will be called ads7846.
+
+config TOUCHSCREEN_AD7877
+ tristate "AD7877 based touchscreens"
+ depends on SPI_MASTER
+ help
+ Say Y here if you have a touchscreen interface using the
+ AD7877 controller, and your board-specific initialization
+ code includes that in its table of SPI devices.
+
+ If unsure, say N (but it's safe to say "Y").
+
+ To compile this driver as a module, choose M here: the
+ module will be called ad7877.
+
+config TOUCHSCREEN_AD7879
+ tristate "Analog Devices AD7879-1/AD7889-1 touchscreen interface"
+ help
+ Say Y here if you want to support a touchscreen interface using
+ the AD7879-1/AD7889-1 controller.
+
+ You should select a bus connection too.
+
+ To compile this driver as a module, choose M here: the
+ module will be called ad7879.
+
+config TOUCHSCREEN_AD7879_I2C
+ tristate "support I2C bus connection"
+ depends on TOUCHSCREEN_AD7879 && I2C
+ help
+ Say Y here if you have AD7879-1/AD7889-1 hooked to an I2C bus.
+
+ To compile this driver as a module, choose M here: the
+ module will be called ad7879-i2c.
+
+config TOUCHSCREEN_AD7879_SPI
+ tristate "support SPI bus connection"
+ depends on TOUCHSCREEN_AD7879 && SPI_MASTER
+ help
+ Say Y here if you have AD7879-1/AD7889-1 hooked to a SPI bus.
+
+ If unsure, say N (but it's safe to say "Y").
+
+ To compile this driver as a module, choose M here: the
+ module will be called ad7879-spi.
+
+config TOUCHSCREEN_AR1021_I2C
+ tristate "Microchip AR1021 i2c touchscreen"
+ depends on I2C && OF
+ help
+ Say Y here if you have the Microchip AR1021 touchscreen controller
+ chip in your system.
+
+ If unsure, say N.
+
+ To compile this driver as a module, choose M here: the
+ module will be called ar1021_i2c.
+
+config TOUCHSCREEN_ATMEL_MXT
+ tristate "Atmel mXT I2C Touchscreen"
+ depends on I2C
+ select FW_LOADER
+ help
+ Say Y here if you have Atmel mXT series I2C touchscreen,
+ such as AT42QT602240/ATMXT224, connected to your system.
+
+ If unsure, say N.
+
+ To compile this driver as a module, choose M here: the
+ module will be called atmel_mxt_ts.
+
+config TOUCHSCREEN_AUO_PIXCIR
+ tristate "AUO in-cell touchscreen using Pixcir ICs"
+ depends on I2C
+ depends on GPIOLIB
+ help
+ Say Y here if you have a AUO display with in-cell touchscreen
+ using Pixcir ICs.
+
+ If unsure, say N.
+
+ To compile this driver as a module, choose M here: the
+ module will be called auo-pixcir-ts.
+
+config TOUCHSCREEN_BU21013
+ tristate "BU21013 based touch panel controllers"
+ depends on I2C
+ help
+ Say Y here if you have a bu21013 touchscreen connected to
+ your system.
+
+ If unsure, say N.
+
+ To compile this driver as a module, choose M here: the
+ module will be called bu21013_ts.
+
+config TOUCHSCREEN_CHIPONE_ICN8318
+ tristate "chipone icn8318 touchscreen controller"
+ depends on GPIOLIB
+ depends on I2C
+ depends on OF
+ help
+ Say Y here if you have a ChipOne icn8318 based I2C touchscreen.
+
+ If unsure, say N.
+
+ To compile this driver as a module, choose M here: the
+ module will be called chipone_icn8318.
+
+config TOUCHSCREEN_CY8CTMG110
+ tristate "cy8ctmg110 touchscreen"
+ depends on I2C
+ depends on GPIOLIB
+ help
+ Say Y here if you have a cy8ctmg110 capacitive touchscreen on
+ an AAVA device.
+
+ If unsure, say N.
+
+ To compile this driver as a module, choose M here: the
+ module will be called cy8ctmg110_ts.
+
+config TOUCHSCREEN_CYTTSP_CORE
+ tristate "Cypress TTSP touchscreen"
+ help
+ Say Y here if you have a touchscreen using controller from
+ the Cypress TrueTouch(tm) Standard Product family connected
+ to your system. You will also need to select appropriate
+ bus connection below.
+
+ If unsure, say N.
+
+ To compile this driver as a module, choose M here: the
+ module will be called cyttsp_core.
+
+config TOUCHSCREEN_CYTTSP_I2C
+ tristate "support I2C bus connection"
+ depends on TOUCHSCREEN_CYTTSP_CORE && I2C
+ help
+ Say Y here if the touchscreen is connected via I2C bus.
+
+ To compile this driver as a module, choose M here: the
+ module will be called cyttsp_i2c.
+
+config TOUCHSCREEN_CYTTSP_SPI
+ tristate "support SPI bus connection"
+ depends on TOUCHSCREEN_CYTTSP_CORE && SPI_MASTER
+ help
+ Say Y here if the touchscreen is connected via SPI bus.
+
+ To compile this driver as a module, choose M here: the
+ module will be called cyttsp_spi.
+
+config TOUCHSCREEN_CYTTSP4_CORE
+ tristate "Cypress TrueTouch Gen4 Touchscreen Driver"
+ help
+ Core driver for Cypress TrueTouch(tm) Standard Product
+ Generation4 touchscreen controllers.
+
+ Say Y here if you have a Cypress Gen4 touchscreen.
+
+ If unsure, say N.
+
+ To compile this driver as a module, choose M here.
+
+config TOUCHSCREEN_CYTTSP4_I2C
+ tristate "support I2C bus connection"
+ depends on TOUCHSCREEN_CYTTSP4_CORE && I2C
+ help
+ Say Y here if the touchscreen is connected via I2C bus.
+
+ To compile this driver as a module, choose M here: the
+ module will be called cyttsp4_i2c.
+
+config TOUCHSCREEN_CYTTSP4_SPI
+ tristate "support SPI bus connection"
+ depends on TOUCHSCREEN_CYTTSP4_CORE && SPI_MASTER
+ help
+ Say Y here if the touchscreen is connected via SPI bus.
+
+ To compile this driver as a module, choose M here: the
+ module will be called cyttsp4_spi.
+
+config TOUCHSCREEN_DA9034
+ tristate "Touchscreen support for Dialog Semiconductor DA9034"
+ depends on PMIC_DA903X
+ default y
+ help
+ Say Y here to enable the support for the touchscreen found
+ on Dialog Semiconductor DA9034 PMIC.
+
+ If unsure, say N.
+
+ To compile this driver as a module, choose M here: the
+ module will be called da9034-ts.
+
+config TOUCHSCREEN_DA9052
+ tristate "Dialog DA9052/DA9053 TSI"
+ depends on PMIC_DA9052
+ help
+ Say Y here to support the touchscreen found on Dialog Semiconductor
+ DA9052-BC and DA9053-AA/Bx PMICs.
+
+ If unsure, say N.
+
+ To compile this driver as a module, choose M here: the
+ module will be called da9052_tsi.
+
+config TOUCHSCREEN_DYNAPRO
+ tristate "Dynapro serial touchscreen"
+ select SERIO
+ help
+ Say Y here if you have a Dynapro serial touchscreen connected to
+ your system.
+
+ If unsure, say N.
+
+ To compile this driver as a module, choose M here: the
+ module will be called dynapro.
+
+config TOUCHSCREEN_HAMPSHIRE
+ tristate "Hampshire serial touchscreen"
+ select SERIO
+ help
+ Say Y here if you have a Hampshire serial touchscreen connected to
+ your system.
+
+ If unsure, say N.
+
+ To compile this driver as a module, choose M here: the
+ module will be called hampshire.
+
+config TOUCHSCREEN_EETI
+ tristate "EETI touchscreen panel support"
+ depends on I2C
+ help
+ Say Y here to enable support for I2C connected EETI touch panels.
+
+ To compile this driver as a module, choose M here: the
+ module will be called eeti_ts.
+
+config TOUCHSCREEN_EGALAX
+ tristate "EETI eGalax multi-touch panel support"
+ depends on I2C && OF
+ help
+ Say Y here to enable support for I2C connected EETI
+ eGalax multi-touch panels.
+
+ To compile this driver as a module, choose M here: the
+ module will be called egalax_ts.
+
+config TOUCHSCREEN_FUJITSU
+ tristate "Fujitsu serial touchscreen"
+ select SERIO
+ help
+ Say Y here if you have the Fujitsu touchscreen (such as one
+ installed in Lifebook P series laptop) connected to your
+ system.
+
+ If unsure, say N.
+
+ To compile this driver as a module, choose M here: the
+ module will be called fujitsu-ts.
+
+config TOUCHSCREEN_GOODIX
+ tristate "Goodix I2C touchscreen"
+ depends on I2C
+ help
+ Say Y here if you have the Goodix touchscreen (such as one
+ installed in Onda v975w tablets) connected to your
+ system. It also supports 5-finger chip models, which can be
+ found on ARM tablets, like Wexler TAB7200 and MSI Primo73.
+
+ If unsure, say N.
+
+ To compile this driver as a module, choose M here: the
+ module will be called goodix.
+
+config TOUCHSCREEN_ILI210X
+ tristate "Ilitek ILI210X based touchscreen"
+ depends on I2C
+ help
+ Say Y here if you have a ILI210X based touchscreen
+ controller. This driver supports models ILI2102,
+ ILI2102s, ILI2103, ILI2103s and ILI2105.
+ Such kind of chipsets can be found in Amazon Kindle Fire
+ touchscreens.
+
+ If unsure, say N.
+
+ To compile this driver as a module, choose M here: the
+ module will be called ili210x.
+
+config TOUCHSCREEN_IPROC
+ tristate "IPROC touch panel driver support"
+ depends on ARCH_BCM_IPROC || COMPILE_TEST
+ help
+ Say Y here if you want to add support for the IPROC touch
+ controller to your system.
+
+ If unsure, say N.
+
+ To compile this driver as a module, choose M here: the
+ module will be called bcm_iproc_tsc.
+
+config TOUCHSCREEN_S3C2410
+ tristate "Samsung S3C2410/generic touchscreen input driver"
+ depends on ARCH_S3C24XX || SAMSUNG_DEV_TS
+ select S3C_ADC
+ help
+ Say Y here if you have the s3c2410 touchscreen.
+
+ If unsure, say N.
+
+ To compile this driver as a module, choose M here: the
+ module will be called s3c2410_ts.
+
+config TOUCHSCREEN_GUNZE
+ tristate "Gunze AHL-51S touchscreen"
+ select SERIO
+ help
+ Say Y here if you have the Gunze AHL-51 touchscreen connected to
+ your system.
+
+ If unsure, say N.
+
+ To compile this driver as a module, choose M here: the
+ module will be called gunze.
+
+config TOUCHSCREEN_ELAN
+ tristate "Elan eKTH I2C touchscreen"
+ depends on I2C
+ help
+ Say Y here if you have an Elan eKTH I2C touchscreen
+ connected to your system.
+
+ If unsure, say N.
+
+ To compile this driver as a module, choose M here: the
+ module will be called elants_i2c.
+
+config TOUCHSCREEN_ELO
+ tristate "Elo serial touchscreens"
+ select SERIO
+ help
+ Say Y here if you have an Elo serial touchscreen connected to
+ your system.
+
+ If unsure, say N.
+
+ To compile this driver as a module, choose M here: the
+ module will be called elo.
+
+config TOUCHSCREEN_WACOM_W8001
+ tristate "Wacom W8001 penabled serial touchscreen"
+ select SERIO
+ help
+ Say Y here if you have an Wacom W8001 penabled serial touchscreen
+ connected to your system.
+
+ If unsure, say N.
+
+ To compile this driver as a module, choose M here: the
+ module will be called wacom_w8001.
+
+config TOUCHSCREEN_WACOM_I2C
+ tristate "Wacom Tablet support (I2C)"
+ depends on I2C
+ help
+ Say Y here if you want to use the I2C version of the Wacom
+ Pen Tablet.
+
+ If unsure, say N.
+
+ To compile this driver as a module, choose M here: the module
+ will be called wacom_i2c.
+
+config TOUCHSCREEN_LPC32XX
+ tristate "LPC32XX touchscreen controller"
+ depends on ARCH_LPC32XX
+ help
+ Say Y here if you have a LPC32XX device and want
+ to support the built-in touchscreen.
+
+ To compile this driver as a module, choose M here: the
+ module will be called lpc32xx_ts.
+
+config TOUCHSCREEN_MAX11801
+ tristate "MAX11801 based touchscreens"
+ depends on I2C
+ help
+ Say Y here if you have a MAX11801 based touchscreen
+ controller.
+
+ If unsure, say N.
+
+ To compile this driver as a module, choose M here: the
+ module will be called max11801_ts.
+
+config TOUCHSCREEN_MCS5000
+ tristate "MELFAS MCS-5000 touchscreen"
+ depends on I2C
+ help
+ Say Y here if you have the MELFAS MCS-5000 touchscreen controller
+ chip in your system.
+
+ If unsure, say N.
+
+ To compile this driver as a module, choose M here: the
+ module will be called mcs5000_ts.
+
+config TOUCHSCREEN_MMS114
+ tristate "MELFAS MMS114 touchscreen"
+ depends on I2C
+ help
+ Say Y here if you have the MELFAS MMS114 touchscreen controller
+ chip in your system.
+
+ If unsure, say N.
+
+ To compile this driver as a module, choose M here: the
+ module will be called mms114.
+
+config TOUCHSCREEN_MTOUCH
+ tristate "MicroTouch serial touchscreens"
+ select SERIO
+ help
+ Say Y here if you have a MicroTouch (3M) serial touchscreen connected to
+ your system.
+
+ If unsure, say N.
+
+ To compile this driver as a module, choose M here: the
+ module will be called mtouch.
+
+config TOUCHSCREEN_INEXIO
+ tristate "iNexio serial touchscreens"
+ select SERIO
+ help
+ Say Y here if you have an iNexio serial touchscreen connected to
+ your system.
+
+ If unsure, say N.
+
+ To compile this driver as a module, choose M here: the
+ module will be called inexio.
+
+config TOUCHSCREEN_INTEL_MID
+ tristate "Intel MID platform resistive touchscreen"
+ depends on INTEL_SCU_IPC
+ help
+ Say Y here if you have a Intel MID based touchscreen in
+ your system.
+
+ If unsure, say N.
+
+ To compile this driver as a module, choose M here: the
+ module will be called intel_mid_touch.
+
+config TOUCHSCREEN_MK712
+ tristate "ICS MicroClock MK712 touchscreen"
+ help
+ Say Y here if you have the ICS MicroClock MK712 touchscreen
+ controller chip in your system.
+
+ If unsure, say N.
+
+ To compile this driver as a module, choose M here: the
+ module will be called mk712.
+
+config TOUCHSCREEN_HP600
+ tristate "HP Jornada 6xx touchscreen"
+ depends on SH_HP6XX && SH_ADC
+ help
+ Say Y here if you have a HP Jornada 620/660/680/690 and want to
+ support the built-in touchscreen.
+
+ To compile this driver as a module, choose M here: the
+ module will be called hp680_ts_input.
+
+config TOUCHSCREEN_HP7XX
+ tristate "HP Jornada 7xx touchscreen"
+ depends on SA1100_JORNADA720_SSP
+ help
+ Say Y here if you have a HP Jornada 710/720/728 and want
+ to support the built-in touchscreen.
+
+ To compile this driver as a module, choose M here: the
+ module will be called jornada720_ts.
+
+config TOUCHSCREEN_IPAQ_MICRO
+ tristate "HP iPAQ Atmel Micro ASIC touchscreen"
+ depends on MFD_IPAQ_MICRO
+ help
+ Say Y here to enable support for the touchscreen attached to
+ the Atmel Micro peripheral controller on iPAQ h3100/h3600/h3700
+
+ If unsure, say N.
+
+ To compile this driver as a module, choose M here: the
+ module will be called ipaq-micro-ts.
+
+config TOUCHSCREEN_HTCPEN
+ tristate "HTC Shift X9500 touchscreen"
+ depends on ISA
+ help
+ Say Y here if you have an HTC Shift UMPC also known as HTC X9500
+ Clio / Shangrila and want to support the built-in touchscreen.
+
+ If unsure, say N.
+
+ To compile this driver as a module, choose M here: the
+ module will be called htcpen.
+
+config TOUCHSCREEN_PENMOUNT
+ tristate "Penmount serial touchscreen"
+ select SERIO
+ help
+ Say Y here if you have a Penmount serial touchscreen connected to
+ your system.
+
+ If unsure, say N.
+
+ To compile this driver as a module, choose M here: the
+ module will be called penmount.
+
+config TOUCHSCREEN_EDT_FT5X06
+ tristate "EDT FocalTech FT5x06 I2C Touchscreen support"
+ depends on I2C
+ help
+ Say Y here if you have an EDT "Polytouch" touchscreen based
+ on the FocalTech FT5x06 family of controllers connected to
+ your system.
+
+ If unsure, say N.
+
+ To compile this driver as a module, choose M here: the
+ module will be called edt-ft5x06.
+
+config TOUCHSCREEN_MIGOR
+ tristate "Renesas MIGO-R touchscreen"
+ depends on SH_MIGOR && I2C
+ help
+ Say Y here to enable MIGO-R touchscreen support.
+
+ If unsure, say N.
+
+ To compile this driver as a module, choose M here: the
+ module will be called migor_ts.
+
+config TOUCHSCREEN_TOUCHRIGHT
+ tristate "Touchright serial touchscreen"
+ select SERIO
+ help
+ Say Y here if you have a Touchright serial touchscreen connected to
+ your system.
+
+ If unsure, say N.
+
+ To compile this driver as a module, choose M here: the
+ module will be called touchright.
+
+config TOUCHSCREEN_TOUCHWIN
+ tristate "Touchwin serial touchscreen"
+ select SERIO
+ help
+ Say Y here if you have a Touchwin serial touchscreen connected to
+ your system.
+
+ If unsure, say N.
+
+ To compile this driver as a module, choose M here: the
+ module will be called touchwin.
+
+config TOUCHSCREEN_TI_AM335X_TSC
+ tristate "TI Touchscreen Interface"
+ depends on MFD_TI_AM335X_TSCADC
+ help
+ Say Y here if you have 4/5/8 wire touchscreen controller
+ to be connected to the ADC controller on your TI AM335x SoC.
+
+ If unsure, say N.
+
+ To compile this driver as a module, choose M here: the
+ module will be called ti_am335x_tsc.
+
+config TOUCHSCREEN_UCB1400
+ tristate "Philips UCB1400 touchscreen"
+ depends on AC97_BUS
+ depends on UCB1400_CORE
+ help
+ This enables support for the Philips UCB1400 touchscreen interface.
+ The UCB1400 is an AC97 audio codec. The touchscreen interface
+ will be initialized only after the ALSA subsystem has been
+ brought up and the UCB1400 detected. You therefore have to
+ configure ALSA support as well (either built-in or modular,
+ independently of whether this driver is itself built-in or
+ modular) for this driver to work.
+
+ To compile this driver as a module, choose M here: the
+ module will be called ucb1400_ts.
+
+config TOUCHSCREEN_PIXCIR
+ tristate "PIXCIR I2C touchscreens"
+ depends on I2C
+ help
+ Say Y here if you have a pixcir i2c touchscreen
+ controller.
+
+ If unsure, say N.
+
+ To compile this driver as a module, choose M here: the
+ module will be called pixcir_i2c_ts.
+
+config TOUCHSCREEN_WM831X
+ tristate "Support for WM831x touchscreen controllers"
+ depends on MFD_WM831X
+ help
+ This enables support for the touchscreen controller on the WM831x
+ series of PMICs.
+
+ To compile this driver as a module, choose M here: the
+ module will be called wm831x-ts.
+
+config TOUCHSCREEN_WM97XX
+ tristate "Support for WM97xx AC97 touchscreen controllers"
+ depends on AC97_BUS
+ help
+ Say Y here if you have a Wolfson Microelectronics WM97xx
+ touchscreen connected to your system. Note that this option
+ only enables core driver, you will also need to select
+ support for appropriate chip below.
+
+ If unsure, say N.
+
+ To compile this driver as a module, choose M here: the
+ module will be called wm97xx-ts.
+
+config TOUCHSCREEN_WM9705
+ bool "WM9705 Touchscreen interface support"
+ depends on TOUCHSCREEN_WM97XX
+ default y
+ help
+ Say Y here to enable support for the Wolfson Microelectronics
+ WM9705 touchscreen controller.
+
+config TOUCHSCREEN_WM9712
+ bool "WM9712 Touchscreen interface support"
+ depends on TOUCHSCREEN_WM97XX
+ default y
+ help
+ Say Y here to enable support for the Wolfson Microelectronics
+ WM9712 touchscreen controller.
+
+config TOUCHSCREEN_WM9713
+ bool "WM9713 Touchscreen interface support"
+ depends on TOUCHSCREEN_WM97XX
+ default y
+ help
+ Say Y here to enable support for the Wolfson Microelectronics
+ WM9713 touchscreen controller.
+
+config TOUCHSCREEN_WM97XX_ATMEL
+ tristate "WM97xx Atmel accelerated touch"
+ depends on TOUCHSCREEN_WM97XX && AVR32
+ help
+ Say Y here for support for streaming mode with WM97xx touchscreens
+ on Atmel AT91 or AVR32 systems with an AC97C module.
+
+ Be aware that this will use channel B in the controller for
+ streaming data, this must not conflict with other AC97C drivers.
+
+ If unsure, say N.
+
+ To compile this driver as a module, choose M here: the module will
+ be called atmel-wm97xx.
+
+config TOUCHSCREEN_WM97XX_MAINSTONE
+ tristate "WM97xx Mainstone/Palm accelerated touch"
+ depends on TOUCHSCREEN_WM97XX && ARCH_PXA
+ help
+ Say Y here for support for streaming mode with WM97xx touchscreens
+ on Mainstone, Palm Tungsten T5, TX and LifeDrive systems.
+
+ If unsure, say N.
+
+ To compile this driver as a module, choose M here: the
+ module will be called mainstone-wm97xx.
+
+config TOUCHSCREEN_WM97XX_ZYLONITE
+ tristate "Zylonite accelerated touch"
+ depends on TOUCHSCREEN_WM97XX && MACH_ZYLONITE
+ select TOUCHSCREEN_WM9713
+ help
+ Say Y here for support for streaming mode with the touchscreen
+ on Zylonite systems.
+
+ If unsure, say N.
+
+ To compile this driver as a module, choose M here: the
+ module will be called zylonite-wm97xx.
+
+config TOUCHSCREEN_USB_COMPOSITE
+ tristate "USB Touchscreen Driver"
+ depends on USB_ARCH_HAS_HCD
+ select USB
+ help
+ USB Touchscreen driver for:
+ - eGalax Touchkit USB (also includes eTurboTouch CT-410/510/700)
+ - PanJit TouchSet USB
+ - 3M MicroTouch USB (EX II series)
+ - ITM
+ - some other eTurboTouch
+ - Gunze AHL61
+ - DMC TSC-10/25
+ - IRTOUCHSYSTEMS/UNITOP
+ - IdealTEK URTC1000
+ - GoTop Super_Q2/GogoPen/PenPower tablets
+ - JASTEC USB Touch Controller/DigiTech DTR-02U
+ - Zytronic controllers
+ - Elo TouchSystems 2700 IntelliTouch
+ - EasyTouch USB Touch Controller from Data Modul
+ - e2i (Mimo monitors)
+
+ Have a look at <http://linux.chapter7.ch/touchkit/> for
+ a usage description and the required user-space stuff.
+
+ To compile this driver as a module, choose M here: the
+ module will be called usbtouchscreen.
+
+config TOUCHSCREEN_MC13783
+ tristate "Freescale MC13783 touchscreen input driver"
+ depends on MFD_MC13XXX
+ help
+ Say Y here if you have an Freescale MC13783 PMIC on your
+ board and want to use its touchscreen
+
+ If unsure, say N.
+
+ To compile this driver as a module, choose M here: the
+ module will be called mc13783_ts.
+
+config TOUCHSCREEN_USB_EGALAX
+ default y
+ bool "eGalax, eTurboTouch CT-410/510/700 device support" if EXPERT
+ depends on TOUCHSCREEN_USB_COMPOSITE
+
+config TOUCHSCREEN_USB_PANJIT
+ default y
+ bool "PanJit device support" if EXPERT
+ depends on TOUCHSCREEN_USB_COMPOSITE
+
+config TOUCHSCREEN_USB_3M
+ default y
+ bool "3M/Microtouch EX II series device support" if EXPERT
+ depends on TOUCHSCREEN_USB_COMPOSITE
+
+config TOUCHSCREEN_USB_ITM
+ default y
+ bool "ITM device support" if EXPERT
+ depends on TOUCHSCREEN_USB_COMPOSITE
+
+config TOUCHSCREEN_USB_ETURBO
+ default y
+ bool "eTurboTouch (non-eGalax compatible) device support" if EXPERT
+ depends on TOUCHSCREEN_USB_COMPOSITE
+
+config TOUCHSCREEN_USB_GUNZE
+ default y
+ bool "Gunze AHL61 device support" if EXPERT
+ depends on TOUCHSCREEN_USB_COMPOSITE
+
+config TOUCHSCREEN_USB_DMC_TSC10
+ default y
+ bool "DMC TSC-10/25 device support" if EXPERT
+ depends on TOUCHSCREEN_USB_COMPOSITE
+
+config TOUCHSCREEN_USB_IRTOUCH
+ default y
+ bool "IRTOUCHSYSTEMS/UNITOP device support" if EXPERT
+ depends on TOUCHSCREEN_USB_COMPOSITE
+
+config TOUCHSCREEN_USB_IDEALTEK
+ default y
+ bool "IdealTEK URTC1000 device support" if EXPERT
+ depends on TOUCHSCREEN_USB_COMPOSITE
+
+config TOUCHSCREEN_USB_GENERAL_TOUCH
+ default y
+ bool "GeneralTouch Touchscreen device support" if EXPERT
+ depends on TOUCHSCREEN_USB_COMPOSITE
+
+config TOUCHSCREEN_USB_GOTOP
+ default y
+ bool "GoTop Super_Q2/GogoPen/PenPower tablet device support" if EXPERT
+ depends on TOUCHSCREEN_USB_COMPOSITE
+
+config TOUCHSCREEN_USB_JASTEC
+ default y
+ bool "JASTEC/DigiTech DTR-02U USB touch controller device support" if EXPERT
+ depends on TOUCHSCREEN_USB_COMPOSITE
+
+config TOUCHSCREEN_USB_ELO
+ default y
+ bool "Elo TouchSystems 2700 IntelliTouch controller device support" if EXPERT
+ depends on TOUCHSCREEN_USB_COMPOSITE
+
+config TOUCHSCREEN_USB_E2I
+ default y
+ bool "e2i Touchscreen controller (e.g. from Mimo 740)" if EXPERT
+ depends on TOUCHSCREEN_USB_COMPOSITE
+
+config TOUCHSCREEN_USB_ZYTRONIC
+ default y
+ bool "Zytronic controller" if EXPERT
+ depends on TOUCHSCREEN_USB_COMPOSITE
+
+config TOUCHSCREEN_USB_ETT_TC45USB
+ default y
+ bool "ET&T USB series TC4UM/TC5UH touchscreen controller support" if EXPERT
+ depends on TOUCHSCREEN_USB_COMPOSITE
+
+config TOUCHSCREEN_USB_NEXIO
+ default y
+ bool "NEXIO/iNexio device support" if EXPERT
+ depends on TOUCHSCREEN_USB_COMPOSITE
+
+config TOUCHSCREEN_USB_EASYTOUCH
+ default y
+ bool "EasyTouch USB Touch controller device support" if EMBEDDED
+ depends on TOUCHSCREEN_USB_COMPOSITE
+ help
+ Say Y here if you have an EasyTouch USB Touch controller.
+ If unsure, say N.
+
+config TOUCHSCREEN_TOUCHIT213
+ tristate "Sahara TouchIT-213 touchscreen"
+ select SERIO
+ help
+ Say Y here if you have a Sahara TouchIT-213 Tablet PC.
+
+ If unsure, say N.
+
+ To compile this driver as a module, choose M here: the
+ module will be called touchit213.
+
+config TOUCHSCREEN_TSC_SERIO
+ tristate "TSC-10/25/40 serial touchscreen support"
+ select SERIO
+ help
+ Say Y here if you have a TSC-10, 25 or 40 serial touchscreen connected
+ to your system.
+
+ If unsure, say N.
+
+ To compile this driver as a module, choose M here: the
+ module will be called tsc40.
+
+config TOUCHSCREEN_TSC2005
+ tristate "TSC2005 based touchscreens"
+ depends on SPI_MASTER
+ help
+ Say Y here if you have a TSC2005 based touchscreen.
+
+ If unsure, say N.
+
+ To compile this driver as a module, choose M here: the
+ module will be called tsc2005.
+
+config TOUCHSCREEN_TSC2007
+ tristate "TSC2007 based touchscreens"
+ depends on I2C
+ help
+ Say Y here if you have a TSC2007 based touchscreen.
+
+ If unsure, say N.
+
+ To compile this driver as a module, choose M here: the
+ module will be called tsc2007.
+
+config TOUCHSCREEN_W90X900
+ tristate "W90P910 touchscreen driver"
+ depends on ARCH_W90X900
+ help
+ Say Y here if you have a W90P910 based touchscreen.
+
+ To compile this driver as a module, choose M here: the
+ module will be called w90p910_ts.
+
+config TOUCHSCREEN_PCAP
+ tristate "Motorola PCAP touchscreen"
+ depends on EZX_PCAP
+ help
+ Say Y here if you have a Motorola EZX telephone and
+ want to enable support for the built-in touchscreen.
+
+ To compile this driver as a module, choose M here: the
+ module will be called pcap_ts.
+
+config TOUCHSCREEN_ST1232
+ tristate "Sitronix ST1232 touchscreen controllers"
+ depends on I2C
+ help
+ Say Y here if you want to support Sitronix ST1232
+ touchscreen controller.
+
+ If unsure, say N.
+
+ To compile this driver as a module, choose M here: the
+ module will be called st1232_ts.
+
+config TOUCHSCREEN_STMPE
+ tristate "STMicroelectronics STMPE touchscreens"
+ depends on MFD_STMPE
+ help
+ Say Y here if you want support for STMicroelectronics
+ STMPE touchscreen controllers.
+
+ To compile this driver as a module, choose M here: the
+ module will be called stmpe-ts.
+
+config TOUCHSCREEN_SUN4I
+ tristate "Allwinner sun4i resistive touchscreen controller support"
+ depends on ARCH_SUNXI || COMPILE_TEST
+ depends on HWMON
+ depends on THERMAL || !THERMAL_OF
+ help
+ This selects support for the resistive touchscreen controller
+ found on Allwinner sunxi SoCs.
+
+ To compile this driver as a module, choose M here: the
+ module will be called sun4i-ts.
+
+config TOUCHSCREEN_SUR40
+ tristate "Samsung SUR40 (Surface 2.0/PixelSense) touchscreen"
+ depends on USB
+ depends on MEDIA_USB_SUPPORT
+ select INPUT_POLLDEV
+ select VIDEOBUF2_DMA_SG
+ help
+ Say Y here if you want support for the Samsung SUR40 touchscreen
+ (also known as Microsoft Surface 2.0 or Microsoft PixelSense).
+
+ To compile this driver as a module, choose M here: the
+ module will be called sur40.
+
+config TOUCHSCREEN_SX8654
+ tristate "Semtech SX8654 touchscreen"
+ depends on I2C
+ help
+ Say Y here if you have a Semtech SX8654 touchscreen controller.
+
+ If unsure, say N
+
+ To compile this driver as a module, choose M here: the
+ module will be called sx8654.
+
+config TOUCHSCREEN_TPS6507X
+ tristate "TPS6507x based touchscreens"
+ depends on I2C
+ select INPUT_POLLDEV
+ help
+ Say Y here if you have a TPS6507x based touchscreen
+ controller.
+
+ If unsure, say N.
+
+ To compile this driver as a module, choose M here: the
+ module will be called tps6507x_ts.
+
+config TOUCHSCREEN_ZFORCE
+ tristate "Neonode zForce infrared touchscreens"
+ depends on I2C
+ depends on GPIOLIB
+ help
+ Say Y here if you have a touchscreen using the zforce
+ infraread technology from Neonode.
+
+ If unsure, say N.
+
+ To compile this driver as a module, choose M here: the
+ module will be called zforce_ts.
+
+endif