diff options
Diffstat (limited to 'kernel/drivers/input/touchscreen/88pm860x-ts.c')
| -rw-r--r-- | kernel/drivers/input/touchscreen/88pm860x-ts.c | 304 |
1 files changed, 304 insertions, 0 deletions
diff --git a/kernel/drivers/input/touchscreen/88pm860x-ts.c b/kernel/drivers/input/touchscreen/88pm860x-ts.c new file mode 100644 index 000000000..251ff2aa0 --- /dev/null +++ b/kernel/drivers/input/touchscreen/88pm860x-ts.c @@ -0,0 +1,304 @@ +/* + * Touchscreen driver for Marvell 88PM860x + * + * Copyright (C) 2009 Marvell International Ltd. + * Haojian Zhuang <haojian.zhuang@marvell.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/platform_device.h> +#include <linux/i2c.h> +#include <linux/input.h> +#include <linux/mfd/88pm860x.h> +#include <linux/slab.h> +#include <linux/device.h> + +#define MEAS_LEN (8) +#define ACCURATE_BIT (12) + +/* touch register */ +#define MEAS_EN3 (0x52) + +#define MEAS_TSIX_1 (0x8D) +#define MEAS_TSIX_2 (0x8E) +#define MEAS_TSIY_1 (0x8F) +#define MEAS_TSIY_2 (0x90) +#define MEAS_TSIZ1_1 (0x91) +#define MEAS_TSIZ1_2 (0x92) +#define MEAS_TSIZ2_1 (0x93) +#define MEAS_TSIZ2_2 (0x94) + +/* bit definitions of touch */ +#define MEAS_PD_EN (1 << 3) +#define MEAS_TSIX_EN (1 << 4) +#define MEAS_TSIY_EN (1 << 5) +#define MEAS_TSIZ1_EN (1 << 6) +#define MEAS_TSIZ2_EN (1 << 7) + +struct pm860x_touch { + struct input_dev *idev; + struct i2c_client *i2c; + struct pm860x_chip *chip; + int irq; + int res_x; /* resistor of Xplate */ +}; + +static irqreturn_t pm860x_touch_handler(int irq, void *data) +{ + struct pm860x_touch *touch = data; + struct pm860x_chip *chip = touch->chip; + unsigned char buf[MEAS_LEN]; + int x, y, pen_down; + int z1, z2, rt = 0; + int ret; + + ret = pm860x_bulk_read(touch->i2c, MEAS_TSIX_1, MEAS_LEN, buf); + if (ret < 0) + goto out; + + pen_down = buf[1] & (1 << 6); + x = ((buf[0] & 0xFF) << 4) | (buf[1] & 0x0F); + y = ((buf[2] & 0xFF) << 4) | (buf[3] & 0x0F); + z1 = ((buf[4] & 0xFF) << 4) | (buf[5] & 0x0F); + z2 = ((buf[6] & 0xFF) << 4) | (buf[7] & 0x0F); + + if (pen_down) { + if ((x != 0) && (z1 != 0) && (touch->res_x != 0)) { + rt = z2 / z1 - 1; + rt = (rt * touch->res_x * x) >> ACCURATE_BIT; + dev_dbg(chip->dev, "z1:%d, z2:%d, rt:%d\n", + z1, z2, rt); + } + input_report_abs(touch->idev, ABS_X, x); + input_report_abs(touch->idev, ABS_Y, y); + input_report_abs(touch->idev, ABS_PRESSURE, rt); + input_report_key(touch->idev, BTN_TOUCH, 1); + dev_dbg(chip->dev, "pen down at [%d, %d].\n", x, y); + } else { + input_report_abs(touch->idev, ABS_PRESSURE, 0); + input_report_key(touch->idev, BTN_TOUCH, 0); + dev_dbg(chip->dev, "pen release\n"); + } + input_sync(touch->idev); + +out: + return IRQ_HANDLED; +} + +static int pm860x_touch_open(struct input_dev *dev) +{ + struct pm860x_touch *touch = input_get_drvdata(dev); + int data, ret; + + data = MEAS_PD_EN | MEAS_TSIX_EN | MEAS_TSIY_EN + | MEAS_TSIZ1_EN | MEAS_TSIZ2_EN; + ret = pm860x_set_bits(touch->i2c, MEAS_EN3, data, data); + if (ret < 0) + goto out; + return 0; +out: + return ret; +} + +static void pm860x_touch_close(struct input_dev *dev) +{ + struct pm860x_touch *touch = input_get_drvdata(dev); + int data; + + data = MEAS_PD_EN | MEAS_TSIX_EN | MEAS_TSIY_EN + | MEAS_TSIZ1_EN | MEAS_TSIZ2_EN; + pm860x_set_bits(touch->i2c, MEAS_EN3, data, 0); +} + +#ifdef CONFIG_OF +static int pm860x_touch_dt_init(struct platform_device *pdev, + struct pm860x_chip *chip, + int *res_x) +{ + struct device_node *np = pdev->dev.parent->of_node; + struct i2c_client *i2c = (chip->id == CHIP_PM8607) ? chip->client \ + : chip->companion; + int data, n, ret; + if (!np) + return -ENODEV; + np = of_find_node_by_name(np, "touch"); + if (!np) { + dev_err(&pdev->dev, "Can't find touch node\n"); + return -EINVAL; + } + /* set GPADC MISC1 register */ + data = 0; + if (!of_property_read_u32(np, "marvell,88pm860x-gpadc-prebias", &n)) + data |= (n << 1) & PM8607_GPADC_PREBIAS_MASK; + if (!of_property_read_u32(np, "marvell,88pm860x-gpadc-slot-cycle", &n)) + data |= (n << 3) & PM8607_GPADC_SLOT_CYCLE_MASK; + if (!of_property_read_u32(np, "marvell,88pm860x-gpadc-off-scale", &n)) + data |= (n << 5) & PM8607_GPADC_OFF_SCALE_MASK; + if (!of_property_read_u32(np, "marvell,88pm860x-gpadc-sw-cal", &n)) + data |= (n << 7) & PM8607_GPADC_SW_CAL_MASK; + if (data) { + ret = pm860x_reg_write(i2c, PM8607_GPADC_MISC1, data); + if (ret < 0) + return -EINVAL; + } + /* set tsi prebias time */ + if (!of_property_read_u32(np, "marvell,88pm860x-tsi-prebias", &data)) { + ret = pm860x_reg_write(i2c, PM8607_TSI_PREBIAS, data); + if (ret < 0) + return -EINVAL; + } + /* set prebias & prechg time of pen detect */ + data = 0; + if (!of_property_read_u32(np, "marvell,88pm860x-pen-prebias", &n)) + data |= n & PM8607_PD_PREBIAS_MASK; + if (!of_property_read_u32(np, "marvell,88pm860x-pen-prechg", &n)) + data |= n & PM8607_PD_PRECHG_MASK; + if (data) { + ret = pm860x_reg_write(i2c, PM8607_PD_PREBIAS, data); + if (ret < 0) + return -EINVAL; + } + of_property_read_u32(np, "marvell,88pm860x-resistor-X", res_x); + return 0; +} +#else +#define pm860x_touch_dt_init(x, y, z) (-1) +#endif + +static int pm860x_touch_probe(struct platform_device *pdev) +{ + struct pm860x_chip *chip = dev_get_drvdata(pdev->dev.parent); + struct pm860x_touch_pdata *pdata = dev_get_platdata(&pdev->dev); + struct pm860x_touch *touch; + struct i2c_client *i2c = (chip->id == CHIP_PM8607) ? chip->client \ + : chip->companion; + int irq, ret, res_x = 0, data = 0; + + irq = platform_get_irq(pdev, 0); + if (irq < 0) { + dev_err(&pdev->dev, "No IRQ resource!\n"); + return -EINVAL; + } + + if (pm860x_touch_dt_init(pdev, chip, &res_x)) { + if (pdata) { + /* set GPADC MISC1 register */ + data = 0; + data |= (pdata->gpadc_prebias << 1) + & PM8607_GPADC_PREBIAS_MASK; + data |= (pdata->slot_cycle << 3) + & PM8607_GPADC_SLOT_CYCLE_MASK; + data |= (pdata->off_scale << 5) + & PM8607_GPADC_OFF_SCALE_MASK; + data |= (pdata->sw_cal << 7) + & PM8607_GPADC_SW_CAL_MASK; + if (data) { + ret = pm860x_reg_write(i2c, + PM8607_GPADC_MISC1, data); + if (ret < 0) + return -EINVAL; + } + /* set tsi prebias time */ + if (pdata->tsi_prebias) { + data = pdata->tsi_prebias; + ret = pm860x_reg_write(i2c, + PM8607_TSI_PREBIAS, data); + if (ret < 0) + return -EINVAL; + } + /* set prebias & prechg time of pen detect */ + data = 0; + data |= pdata->pen_prebias + & PM8607_PD_PREBIAS_MASK; + data |= (pdata->pen_prechg << 5) + & PM8607_PD_PRECHG_MASK; + if (data) { + ret = pm860x_reg_write(i2c, + PM8607_PD_PREBIAS, data); + if (ret < 0) + return -EINVAL; + } + res_x = pdata->res_x; + } else { + dev_err(&pdev->dev, "failed to get platform data\n"); + return -EINVAL; + } + } + /* enable GPADC */ + ret = pm860x_set_bits(i2c, PM8607_GPADC_MISC1, PM8607_GPADC_EN, + PM8607_GPADC_EN); + if (ret) + return ret; + + touch = devm_kzalloc(&pdev->dev, sizeof(struct pm860x_touch), + GFP_KERNEL); + if (!touch) + return -ENOMEM; + + platform_set_drvdata(pdev, touch); + + touch->idev = devm_input_allocate_device(&pdev->dev); + if (!touch->idev) { + dev_err(&pdev->dev, "Failed to allocate input device!\n"); + return -ENOMEM; + } + + touch->idev->name = "88pm860x-touch"; + touch->idev->phys = "88pm860x/input0"; + touch->idev->id.bustype = BUS_I2C; + touch->idev->dev.parent = &pdev->dev; + touch->idev->open = pm860x_touch_open; + touch->idev->close = pm860x_touch_close; + touch->chip = chip; + touch->i2c = i2c; + touch->irq = irq; + touch->res_x = res_x; + input_set_drvdata(touch->idev, touch); + + ret = devm_request_threaded_irq(&pdev->dev, touch->irq, NULL, + pm860x_touch_handler, IRQF_ONESHOT, + "touch", touch); + if (ret < 0) + return ret; + + __set_bit(EV_ABS, touch->idev->evbit); + __set_bit(ABS_X, touch->idev->absbit); + __set_bit(ABS_Y, touch->idev->absbit); + __set_bit(ABS_PRESSURE, touch->idev->absbit); + __set_bit(EV_SYN, touch->idev->evbit); + __set_bit(EV_KEY, touch->idev->evbit); + __set_bit(BTN_TOUCH, touch->idev->keybit); + + input_set_abs_params(touch->idev, ABS_X, 0, 1 << ACCURATE_BIT, 0, 0); + input_set_abs_params(touch->idev, ABS_Y, 0, 1 << ACCURATE_BIT, 0, 0); + input_set_abs_params(touch->idev, ABS_PRESSURE, 0, 1 << ACCURATE_BIT, + 0, 0); + + ret = input_register_device(touch->idev); + if (ret < 0) { + dev_err(chip->dev, "Failed to register touch!\n"); + return ret; + } + + platform_set_drvdata(pdev, touch); + return 0; +} + +static struct platform_driver pm860x_touch_driver = { + .driver = { + .name = "88pm860x-touch", + }, + .probe = pm860x_touch_probe, +}; +module_platform_driver(pm860x_touch_driver); + +MODULE_DESCRIPTION("Touchscreen driver for Marvell Semiconductor 88PM860x"); +MODULE_AUTHOR("Haojian Zhuang <haojian.zhuang@marvell.com>"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:88pm860x-touch"); + |