diff options
Diffstat (limited to 'kernel/drivers/infiniband/hw/qib/qib.h')
| -rw-r--r-- | kernel/drivers/infiniband/hw/qib/qib.h | 1543 |
1 files changed, 1543 insertions, 0 deletions
diff --git a/kernel/drivers/infiniband/hw/qib/qib.h b/kernel/drivers/infiniband/hw/qib/qib.h new file mode 100644 index 000000000..7df16f74b --- /dev/null +++ b/kernel/drivers/infiniband/hw/qib/qib.h @@ -0,0 +1,1543 @@ +#ifndef _QIB_KERNEL_H +#define _QIB_KERNEL_H +/* + * Copyright (c) 2012, 2013 Intel Corporation. All rights reserved. + * Copyright (c) 2006 - 2012 QLogic Corporation. All rights reserved. + * Copyright (c) 2003, 2004, 2005, 2006 PathScale, Inc. All rights reserved. + * + * This software is available to you under a choice of one of two + * licenses. You may choose to be licensed under the terms of the GNU + * General Public License (GPL) Version 2, available from the file + * COPYING in the main directory of this source tree, or the + * OpenIB.org BSD license below: + * + * Redistribution and use in source and binary forms, with or + * without modification, are permitted provided that the following + * conditions are met: + * + * - Redistributions of source code must retain the above + * copyright notice, this list of conditions and the following + * disclaimer. + * + * - Redistributions in binary form must reproduce the above + * copyright notice, this list of conditions and the following + * disclaimer in the documentation and/or other materials + * provided with the distribution. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + */ + +/* + * This header file is the base header file for qlogic_ib kernel code + * qib_user.h serves a similar purpose for user code. + */ + +#include <linux/interrupt.h> +#include <linux/pci.h> +#include <linux/dma-mapping.h> +#include <linux/mutex.h> +#include <linux/list.h> +#include <linux/scatterlist.h> +#include <linux/slab.h> +#include <linux/io.h> +#include <linux/fs.h> +#include <linux/completion.h> +#include <linux/kref.h> +#include <linux/sched.h> +#include <linux/kthread.h> + +#include "qib_common.h" +#include "qib_verbs.h" + +/* only s/w major version of QLogic_IB we can handle */ +#define QIB_CHIP_VERS_MAJ 2U + +/* don't care about this except printing */ +#define QIB_CHIP_VERS_MIN 0U + +/* The Organization Unique Identifier (Mfg code), and its position in GUID */ +#define QIB_OUI 0x001175 +#define QIB_OUI_LSB 40 + +/* + * per driver stats, either not device nor port-specific, or + * summed over all of the devices and ports. + * They are described by name via ipathfs filesystem, so layout + * and number of elements can change without breaking compatibility. + * If members are added or deleted qib_statnames[] in qib_fs.c must + * change to match. + */ +struct qlogic_ib_stats { + __u64 sps_ints; /* number of interrupts handled */ + __u64 sps_errints; /* number of error interrupts */ + __u64 sps_txerrs; /* tx-related packet errors */ + __u64 sps_rcverrs; /* non-crc rcv packet errors */ + __u64 sps_hwerrs; /* hardware errors reported (parity, etc.) */ + __u64 sps_nopiobufs; /* no pio bufs avail from kernel */ + __u64 sps_ctxts; /* number of contexts currently open */ + __u64 sps_lenerrs; /* number of kernel packets where RHF != LRH len */ + __u64 sps_buffull; + __u64 sps_hdrfull; +}; + +extern struct qlogic_ib_stats qib_stats; +extern const struct pci_error_handlers qib_pci_err_handler; + +#define QIB_CHIP_SWVERSION QIB_CHIP_VERS_MAJ +/* + * First-cut critierion for "device is active" is + * two thousand dwords combined Tx, Rx traffic per + * 5-second interval. SMA packets are 64 dwords, + * and occur "a few per second", presumably each way. + */ +#define QIB_TRAFFIC_ACTIVE_THRESHOLD (2000) + +/* + * Struct used to indicate which errors are logged in each of the + * error-counters that are logged to EEPROM. A counter is incremented + * _once_ (saturating at 255) for each event with any bits set in + * the error or hwerror register masks below. + */ +#define QIB_EEP_LOG_CNT (4) +struct qib_eep_log_mask { + u64 errs_to_log; + u64 hwerrs_to_log; +}; + +/* + * Below contains all data related to a single context (formerly called port). + */ + +#ifdef CONFIG_DEBUG_FS +struct qib_opcode_stats_perctx; +#endif + +struct qib_ctxtdata { + void **rcvegrbuf; + dma_addr_t *rcvegrbuf_phys; + /* rcvhdrq base, needs mmap before useful */ + void *rcvhdrq; + /* kernel virtual address where hdrqtail is updated */ + void *rcvhdrtail_kvaddr; + /* + * temp buffer for expected send setup, allocated at open, instead + * of each setup call + */ + void *tid_pg_list; + /* + * Shared page for kernel to signal user processes that send buffers + * need disarming. The process should call QIB_CMD_DISARM_BUFS + * or QIB_CMD_ACK_EVENT with IPATH_EVENT_DISARM_BUFS set. + */ + unsigned long *user_event_mask; + /* when waiting for rcv or pioavail */ + wait_queue_head_t wait; + /* + * rcvegr bufs base, physical, must fit + * in 44 bits so 32 bit programs mmap64 44 bit works) + */ + dma_addr_t rcvegr_phys; + /* mmap of hdrq, must fit in 44 bits */ + dma_addr_t rcvhdrq_phys; + dma_addr_t rcvhdrqtailaddr_phys; + + /* + * number of opens (including slave sub-contexts) on this instance + * (ignoring forks, dup, etc. for now) + */ + int cnt; + /* + * how much space to leave at start of eager TID entries for + * protocol use, on each TID + */ + /* instead of calculating it */ + unsigned ctxt; + /* local node of context */ + int node_id; + /* non-zero if ctxt is being shared. */ + u16 subctxt_cnt; + /* non-zero if ctxt is being shared. */ + u16 subctxt_id; + /* number of eager TID entries. */ + u16 rcvegrcnt; + /* index of first eager TID entry. */ + u16 rcvegr_tid_base; + /* number of pio bufs for this ctxt (all procs, if shared) */ + u32 piocnt; + /* first pio buffer for this ctxt */ + u32 pio_base; + /* chip offset of PIO buffers for this ctxt */ + u32 piobufs; + /* how many alloc_pages() chunks in rcvegrbuf_pages */ + u32 rcvegrbuf_chunks; + /* how many egrbufs per chunk */ + u16 rcvegrbufs_perchunk; + /* ilog2 of above */ + u16 rcvegrbufs_perchunk_shift; + /* order for rcvegrbuf_pages */ + size_t rcvegrbuf_size; + /* rcvhdrq size (for freeing) */ + size_t rcvhdrq_size; + /* per-context flags for fileops/intr communication */ + unsigned long flag; + /* next expected TID to check when looking for free */ + u32 tidcursor; + /* WAIT_RCV that timed out, no interrupt */ + u32 rcvwait_to; + /* WAIT_PIO that timed out, no interrupt */ + u32 piowait_to; + /* WAIT_RCV already happened, no wait */ + u32 rcvnowait; + /* WAIT_PIO already happened, no wait */ + u32 pionowait; + /* total number of polled urgent packets */ + u32 urgent; + /* saved total number of polled urgent packets for poll edge trigger */ + u32 urgent_poll; + /* pid of process using this ctxt */ + pid_t pid; + pid_t subpid[QLOGIC_IB_MAX_SUBCTXT]; + /* same size as task_struct .comm[], command that opened context */ + char comm[16]; + /* pkeys set by this use of this ctxt */ + u16 pkeys[4]; + /* so file ops can get at unit */ + struct qib_devdata *dd; + /* so funcs that need physical port can get it easily */ + struct qib_pportdata *ppd; + /* A page of memory for rcvhdrhead, rcvegrhead, rcvegrtail * N */ + void *subctxt_uregbase; + /* An array of pages for the eager receive buffers * N */ + void *subctxt_rcvegrbuf; + /* An array of pages for the eager header queue entries * N */ + void *subctxt_rcvhdr_base; + /* The version of the library which opened this ctxt */ + u32 userversion; + /* Bitmask of active slaves */ + u32 active_slaves; + /* Type of packets or conditions we want to poll for */ + u16 poll_type; + /* receive packet sequence counter */ + u8 seq_cnt; + u8 redirect_seq_cnt; + /* ctxt rcvhdrq head offset */ + u32 head; + /* lookaside fields */ + struct qib_qp *lookaside_qp; + u32 lookaside_qpn; + /* QPs waiting for context processing */ + struct list_head qp_wait_list; +#ifdef CONFIG_DEBUG_FS + /* verbs stats per CTX */ + struct qib_opcode_stats_perctx *opstats; +#endif +}; + +struct qib_sge_state; + +struct qib_sdma_txreq { + int flags; + int sg_count; + dma_addr_t addr; + void (*callback)(struct qib_sdma_txreq *, int); + u16 start_idx; /* sdma private */ + u16 next_descq_idx; /* sdma private */ + struct list_head list; /* sdma private */ +}; + +struct qib_sdma_desc { + __le64 qw[2]; +}; + +struct qib_verbs_txreq { + struct qib_sdma_txreq txreq; + struct qib_qp *qp; + struct qib_swqe *wqe; + u32 dwords; + u16 hdr_dwords; + u16 hdr_inx; + struct qib_pio_header *align_buf; + struct qib_mregion *mr; + struct qib_sge_state *ss; +}; + +#define QIB_SDMA_TXREQ_F_USELARGEBUF 0x1 +#define QIB_SDMA_TXREQ_F_HEADTOHOST 0x2 +#define QIB_SDMA_TXREQ_F_INTREQ 0x4 +#define QIB_SDMA_TXREQ_F_FREEBUF 0x8 +#define QIB_SDMA_TXREQ_F_FREEDESC 0x10 + +#define QIB_SDMA_TXREQ_S_OK 0 +#define QIB_SDMA_TXREQ_S_SENDERROR 1 +#define QIB_SDMA_TXREQ_S_ABORTED 2 +#define QIB_SDMA_TXREQ_S_SHUTDOWN 3 + +/* + * Get/Set IB link-level config parameters for f_get/set_ib_cfg() + * Mostly for MADs that set or query link parameters, also ipath + * config interfaces + */ +#define QIB_IB_CFG_LIDLMC 0 /* LID (LS16b) and Mask (MS16b) */ +#define QIB_IB_CFG_LWID_ENB 2 /* allowed Link-width */ +#define QIB_IB_CFG_LWID 3 /* currently active Link-width */ +#define QIB_IB_CFG_SPD_ENB 4 /* allowed Link speeds */ +#define QIB_IB_CFG_SPD 5 /* current Link spd */ +#define QIB_IB_CFG_RXPOL_ENB 6 /* Auto-RX-polarity enable */ +#define QIB_IB_CFG_LREV_ENB 7 /* Auto-Lane-reversal enable */ +#define QIB_IB_CFG_LINKLATENCY 8 /* Link Latency (IB1.2 only) */ +#define QIB_IB_CFG_HRTBT 9 /* IB heartbeat off/enable/auto; DDR/QDR only */ +#define QIB_IB_CFG_OP_VLS 10 /* operational VLs */ +#define QIB_IB_CFG_VL_HIGH_CAP 11 /* num of VL high priority weights */ +#define QIB_IB_CFG_VL_LOW_CAP 12 /* num of VL low priority weights */ +#define QIB_IB_CFG_OVERRUN_THRESH 13 /* IB overrun threshold */ +#define QIB_IB_CFG_PHYERR_THRESH 14 /* IB PHY error threshold */ +#define QIB_IB_CFG_LINKDEFAULT 15 /* IB link default (sleep/poll) */ +#define QIB_IB_CFG_PKEYS 16 /* update partition keys */ +#define QIB_IB_CFG_MTU 17 /* update MTU in IBC */ +#define QIB_IB_CFG_LSTATE 18 /* update linkcmd and linkinitcmd in IBC */ +#define QIB_IB_CFG_VL_HIGH_LIMIT 19 +#define QIB_IB_CFG_PMA_TICKS 20 /* PMA sample tick resolution */ +#define QIB_IB_CFG_PORT 21 /* switch port we are connected to */ + +/* + * for CFG_LSTATE: LINKCMD in upper 16 bits, LINKINITCMD in lower 16 + * IB_LINKINITCMD_POLL and SLEEP are also used as set/get values for + * QIB_IB_CFG_LINKDEFAULT cmd + */ +#define IB_LINKCMD_DOWN (0 << 16) +#define IB_LINKCMD_ARMED (1 << 16) +#define IB_LINKCMD_ACTIVE (2 << 16) +#define IB_LINKINITCMD_NOP 0 +#define IB_LINKINITCMD_POLL 1 +#define IB_LINKINITCMD_SLEEP 2 +#define IB_LINKINITCMD_DISABLE 3 + +/* + * valid states passed to qib_set_linkstate() user call + */ +#define QIB_IB_LINKDOWN 0 +#define QIB_IB_LINKARM 1 +#define QIB_IB_LINKACTIVE 2 +#define QIB_IB_LINKDOWN_ONLY 3 +#define QIB_IB_LINKDOWN_SLEEP 4 +#define QIB_IB_LINKDOWN_DISABLE 5 + +/* + * These 7 values (SDR, DDR, and QDR may be ORed for auto-speed + * negotiation) are used for the 3rd argument to path_f_set_ib_cfg + * with cmd QIB_IB_CFG_SPD_ENB, by direct calls or via sysfs. They + * are also the the possible values for qib_link_speed_enabled and active + * The values were chosen to match values used within the IB spec. + */ +#define QIB_IB_SDR 1 +#define QIB_IB_DDR 2 +#define QIB_IB_QDR 4 + +#define QIB_DEFAULT_MTU 4096 + +/* max number of IB ports supported per HCA */ +#define QIB_MAX_IB_PORTS 2 + +/* + * Possible IB config parameters for f_get/set_ib_table() + */ +#define QIB_IB_TBL_VL_HIGH_ARB 1 /* Get/set VL high priority weights */ +#define QIB_IB_TBL_VL_LOW_ARB 2 /* Get/set VL low priority weights */ + +/* + * Possible "operations" for f_rcvctrl(ppd, op, ctxt) + * these are bits so they can be combined, e.g. + * QIB_RCVCTRL_INTRAVAIL_ENB | QIB_RCVCTRL_CTXT_ENB + */ +#define QIB_RCVCTRL_TAILUPD_ENB 0x01 +#define QIB_RCVCTRL_TAILUPD_DIS 0x02 +#define QIB_RCVCTRL_CTXT_ENB 0x04 +#define QIB_RCVCTRL_CTXT_DIS 0x08 +#define QIB_RCVCTRL_INTRAVAIL_ENB 0x10 +#define QIB_RCVCTRL_INTRAVAIL_DIS 0x20 +#define QIB_RCVCTRL_PKEY_ENB 0x40 /* Note, default is enabled */ +#define QIB_RCVCTRL_PKEY_DIS 0x80 +#define QIB_RCVCTRL_BP_ENB 0x0100 +#define QIB_RCVCTRL_BP_DIS 0x0200 +#define QIB_RCVCTRL_TIDFLOW_ENB 0x0400 +#define QIB_RCVCTRL_TIDFLOW_DIS 0x0800 + +/* + * Possible "operations" for f_sendctrl(ppd, op, var) + * these are bits so they can be combined, e.g. + * QIB_SENDCTRL_BUFAVAIL_ENB | QIB_SENDCTRL_ENB + * Some operations (e.g. DISARM, ABORT) are known to + * be "one-shot", so do not modify shadow. + */ +#define QIB_SENDCTRL_DISARM (0x1000) +#define QIB_SENDCTRL_DISARM_BUF(bufn) ((bufn) | QIB_SENDCTRL_DISARM) + /* available (0x2000) */ +#define QIB_SENDCTRL_AVAIL_DIS (0x4000) +#define QIB_SENDCTRL_AVAIL_ENB (0x8000) +#define QIB_SENDCTRL_AVAIL_BLIP (0x10000) +#define QIB_SENDCTRL_SEND_DIS (0x20000) +#define QIB_SENDCTRL_SEND_ENB (0x40000) +#define QIB_SENDCTRL_FLUSH (0x80000) +#define QIB_SENDCTRL_CLEAR (0x100000) +#define QIB_SENDCTRL_DISARM_ALL (0x200000) + +/* + * These are the generic indices for requesting per-port + * counter values via the f_portcntr function. They + * are always returned as 64 bit values, although most + * are 32 bit counters. + */ +/* send-related counters */ +#define QIBPORTCNTR_PKTSEND 0U +#define QIBPORTCNTR_WORDSEND 1U +#define QIBPORTCNTR_PSXMITDATA 2U +#define QIBPORTCNTR_PSXMITPKTS 3U +#define QIBPORTCNTR_PSXMITWAIT 4U +#define QIBPORTCNTR_SENDSTALL 5U +/* receive-related counters */ +#define QIBPORTCNTR_PKTRCV 6U +#define QIBPORTCNTR_PSRCVDATA 7U +#define QIBPORTCNTR_PSRCVPKTS 8U +#define QIBPORTCNTR_RCVEBP 9U +#define QIBPORTCNTR_RCVOVFL 10U +#define QIBPORTCNTR_WORDRCV 11U +/* IB link related error counters */ +#define QIBPORTCNTR_RXLOCALPHYERR 12U +#define QIBPORTCNTR_RXVLERR 13U +#define QIBPORTCNTR_ERRICRC 14U +#define QIBPORTCNTR_ERRVCRC 15U +#define QIBPORTCNTR_ERRLPCRC 16U +#define QIBPORTCNTR_BADFORMAT 17U +#define QIBPORTCNTR_ERR_RLEN 18U +#define QIBPORTCNTR_IBSYMBOLERR 19U +#define QIBPORTCNTR_INVALIDRLEN 20U +#define QIBPORTCNTR_UNSUPVL 21U +#define QIBPORTCNTR_EXCESSBUFOVFL 22U +#define QIBPORTCNTR_ERRLINK 23U +#define QIBPORTCNTR_IBLINKDOWN 24U +#define QIBPORTCNTR_IBLINKERRRECOV 25U +#define QIBPORTCNTR_LLI 26U +/* other error counters */ +#define QIBPORTCNTR_RXDROPPKT 27U +#define QIBPORTCNTR_VL15PKTDROP 28U +#define QIBPORTCNTR_ERRPKEY 29U +#define QIBPORTCNTR_KHDROVFL 30U +/* sampling counters (these are actually control registers) */ +#define QIBPORTCNTR_PSINTERVAL 31U +#define QIBPORTCNTR_PSSTART 32U +#define QIBPORTCNTR_PSSTAT 33U + +/* how often we check for packet activity for "power on hours (in seconds) */ +#define ACTIVITY_TIMER 5 + +#define MAX_NAME_SIZE 64 + +#ifdef CONFIG_INFINIBAND_QIB_DCA +struct qib_irq_notify; +#endif + +struct qib_msix_entry { + struct msix_entry msix; + void *arg; +#ifdef CONFIG_INFINIBAND_QIB_DCA + int dca; + int rcv; + struct qib_irq_notify *notifier; +#endif + char name[MAX_NAME_SIZE]; + cpumask_var_t mask; +}; + +/* Below is an opaque struct. Each chip (device) can maintain + * private data needed for its operation, but not germane to the + * rest of the driver. For convenience, we define another that + * is chip-specific, per-port + */ +struct qib_chip_specific; +struct qib_chipport_specific; + +enum qib_sdma_states { + qib_sdma_state_s00_hw_down, + qib_sdma_state_s10_hw_start_up_wait, + qib_sdma_state_s20_idle, + qib_sdma_state_s30_sw_clean_up_wait, + qib_sdma_state_s40_hw_clean_up_wait, + qib_sdma_state_s50_hw_halt_wait, + qib_sdma_state_s99_running, +}; + +enum qib_sdma_events { + qib_sdma_event_e00_go_hw_down, + qib_sdma_event_e10_go_hw_start, + qib_sdma_event_e20_hw_started, + qib_sdma_event_e30_go_running, + qib_sdma_event_e40_sw_cleaned, + qib_sdma_event_e50_hw_cleaned, + qib_sdma_event_e60_hw_halted, + qib_sdma_event_e70_go_idle, + qib_sdma_event_e7220_err_halted, + qib_sdma_event_e7322_err_halted, + qib_sdma_event_e90_timer_tick, +}; + +extern char *qib_sdma_state_names[]; +extern char *qib_sdma_event_names[]; + +struct sdma_set_state_action { + unsigned op_enable:1; + unsigned op_intenable:1; + unsigned op_halt:1; + unsigned op_drain:1; + unsigned go_s99_running_tofalse:1; + unsigned go_s99_running_totrue:1; +}; + +struct qib_sdma_state { + struct kref kref; + struct completion comp; + enum qib_sdma_states current_state; + struct sdma_set_state_action *set_state_action; + unsigned current_op; + unsigned go_s99_running; + unsigned first_sendbuf; + unsigned last_sendbuf; /* really last +1 */ + /* debugging/devel */ + enum qib_sdma_states previous_state; + unsigned previous_op; + enum qib_sdma_events last_event; +}; + +struct xmit_wait { + struct timer_list timer; + u64 counter; + u8 flags; + struct cache { + u64 psxmitdata; + u64 psrcvdata; + u64 psxmitpkts; + u64 psrcvpkts; + u64 psxmitwait; + } counter_cache; +}; + +/* + * The structure below encapsulates data relevant to a physical IB Port. + * Current chips support only one such port, but the separation + * clarifies things a bit. Note that to conform to IB conventions, + * port-numbers are one-based. The first or only port is port1. + */ +struct qib_pportdata { + struct qib_ibport ibport_data; + + struct qib_devdata *dd; + struct qib_chippport_specific *cpspec; /* chip-specific per-port */ + struct kobject pport_kobj; + struct kobject pport_cc_kobj; + struct kobject sl2vl_kobj; + struct kobject diagc_kobj; + + /* GUID for this interface, in network order */ + __be64 guid; + + /* QIB_POLL, etc. link-state specific flags, per port */ + u32 lflags; + /* qib_lflags driver is waiting for */ + u32 state_wanted; + spinlock_t lflags_lock; + + /* ref count for each pkey */ + atomic_t pkeyrefs[4]; + + /* + * this address is mapped readonly into user processes so they can + * get status cheaply, whenever they want. One qword of status per port + */ + u64 *statusp; + + /* SendDMA related entries */ + + /* read mostly */ + struct qib_sdma_desc *sdma_descq; + struct workqueue_struct *qib_wq; + struct qib_sdma_state sdma_state; + dma_addr_t sdma_descq_phys; + volatile __le64 *sdma_head_dma; /* DMA'ed by chip */ + dma_addr_t sdma_head_phys; + u16 sdma_descq_cnt; + + /* read/write using lock */ + spinlock_t sdma_lock ____cacheline_aligned_in_smp; + struct list_head sdma_activelist; + struct list_head sdma_userpending; + u64 sdma_descq_added; + u64 sdma_descq_removed; + u16 sdma_descq_tail; + u16 sdma_descq_head; + u8 sdma_generation; + u8 sdma_intrequest; + + struct tasklet_struct sdma_sw_clean_up_task + ____cacheline_aligned_in_smp; + + wait_queue_head_t state_wait; /* for state_wanted */ + + /* HoL blocking for SMP replies */ + unsigned hol_state; + struct timer_list hol_timer; + + /* + * Shadow copies of registers; size indicates read access size. + * Most of them are readonly, but some are write-only register, + * where we manipulate the bits in the shadow copy, and then write + * the shadow copy to qlogic_ib. + * + * We deliberately make most of these 32 bits, since they have + * restricted range. For any that we read, we won't to generate 32 + * bit accesses, since Opteron will generate 2 separate 32 bit HT + * transactions for a 64 bit read, and we want to avoid unnecessary + * bus transactions. + */ + + /* This is the 64 bit group */ + /* last ibcstatus. opaque outside chip-specific code */ + u64 lastibcstat; + + /* these are the "32 bit" regs */ + + /* + * the following two are 32-bit bitmasks, but {test,clear,set}_bit + * all expect bit fields to be "unsigned long" + */ + unsigned long p_rcvctrl; /* shadow per-port rcvctrl */ + unsigned long p_sendctrl; /* shadow per-port sendctrl */ + + u32 ibmtu; /* The MTU programmed for this unit */ + /* + * Current max size IB packet (in bytes) including IB headers, that + * we can send. Changes when ibmtu changes. + */ + u32 ibmaxlen; + /* + * ibmaxlen at init time, limited by chip and by receive buffer + * size. Not changed after init. + */ + u32 init_ibmaxlen; + /* LID programmed for this instance */ + u16 lid; + /* list of pkeys programmed; 0 if not set */ + u16 pkeys[4]; + /* LID mask control */ + u8 lmc; + u8 link_width_supported; + u8 link_speed_supported; + u8 link_width_enabled; + u8 link_speed_enabled; + u8 link_width_active; + u8 link_speed_active; + u8 vls_supported; + u8 vls_operational; + /* Rx Polarity inversion (compensate for ~tx on partner) */ + u8 rx_pol_inv; + + u8 hw_pidx; /* physical port index */ + u8 port; /* IB port number and index into dd->pports - 1 */ + + u8 delay_mult; + + /* used to override LED behavior */ + u8 led_override; /* Substituted for normal value, if non-zero */ + u16 led_override_timeoff; /* delta to next timer event */ + u8 led_override_vals[2]; /* Alternates per blink-frame */ + u8 led_override_phase; /* Just counts, LSB picks from vals[] */ + atomic_t led_override_timer_active; + /* Used to flash LEDs in override mode */ + struct timer_list led_override_timer; + struct xmit_wait cong_stats; + struct timer_list symerr_clear_timer; + + /* Synchronize access between driver writes and sysfs reads */ + spinlock_t cc_shadow_lock + ____cacheline_aligned_in_smp; + + /* Shadow copy of the congestion control table */ + struct cc_table_shadow *ccti_entries_shadow; + + /* Shadow copy of the congestion control entries */ + struct ib_cc_congestion_setting_attr_shadow *congestion_entries_shadow; + + /* List of congestion control table entries */ + struct ib_cc_table_entry_shadow *ccti_entries; + + /* 16 congestion entries with each entry corresponding to a SL */ + struct ib_cc_congestion_entry_shadow *congestion_entries; + + /* Maximum number of congestion control entries that the agent expects + * the manager to send. + */ + u16 cc_supported_table_entries; + + /* Total number of congestion control table entries */ + u16 total_cct_entry; + + /* Bit map identifying service level */ + u16 cc_sl_control_map; + + /* maximum congestion control table index */ + u16 ccti_limit; + + /* CA's max number of 64 entry units in the congestion control table */ + u8 cc_max_table_entries; +}; + +/* Observers. Not to be taken lightly, possibly not to ship. */ +/* + * If a diag read or write is to (bottom <= offset <= top), + * the "hoook" is called, allowing, e.g. shadows to be + * updated in sync with the driver. struct diag_observer + * is the "visible" part. + */ +struct diag_observer; + +typedef int (*diag_hook) (struct qib_devdata *dd, + const struct diag_observer *op, + u32 offs, u64 *data, u64 mask, int only_32); + +struct diag_observer { + diag_hook hook; + u32 bottom; + u32 top; +}; + +extern int qib_register_observer(struct qib_devdata *dd, + const struct diag_observer *op); + +/* Only declared here, not defined. Private to diags */ +struct diag_observer_list_elt; + +/* device data struct now contains only "general per-device" info. + * fields related to a physical IB port are in a qib_pportdata struct, + * described above) while fields only used by a particular chip-type are in + * a qib_chipdata struct, whose contents are opaque to this file. + */ +struct qib_devdata { + struct qib_ibdev verbs_dev; /* must be first */ + struct list_head list; + /* pointers to related structs for this device */ + /* pci access data structure */ + struct pci_dev *pcidev; + struct cdev *user_cdev; + struct cdev *diag_cdev; + struct device *user_device; + struct device *diag_device; + + /* mem-mapped pointer to base of chip regs */ + u64 __iomem *kregbase; + /* end of mem-mapped chip space excluding sendbuf and user regs */ + u64 __iomem *kregend; + /* physical address of chip for io_remap, etc. */ + resource_size_t physaddr; + /* qib_cfgctxts pointers */ + struct qib_ctxtdata **rcd; /* Receive Context Data */ + + /* qib_pportdata, points to array of (physical) port-specific + * data structs, indexed by pidx (0..n-1) + */ + struct qib_pportdata *pport; + struct qib_chip_specific *cspec; /* chip-specific */ + + /* kvirt address of 1st 2k pio buffer */ + void __iomem *pio2kbase; + /* kvirt address of 1st 4k pio buffer */ + void __iomem *pio4kbase; + /* mem-mapped pointer to base of PIO buffers (if using WC PAT) */ + void __iomem *piobase; + /* mem-mapped pointer to base of user chip regs (if using WC PAT) */ + u64 __iomem *userbase; + void __iomem *piovl15base; /* base of VL15 buffers, if not WC */ + /* + * points to area where PIOavail registers will be DMA'ed. + * Has to be on a page of it's own, because the page will be + * mapped into user program space. This copy is *ONLY* ever + * written by DMA, not by the driver! Need a copy per device + * when we get to multiple devices + */ + volatile __le64 *pioavailregs_dma; /* DMA'ed by chip */ + /* physical address where updates occur */ + dma_addr_t pioavailregs_phys; + + /* device-specific implementations of functions needed by + * common code. Contrary to previous consensus, we can't + * really just point to a device-specific table, because we + * may need to "bend", e.g. *_f_put_tid + */ + /* fallback to alternate interrupt type if possible */ + int (*f_intr_fallback)(struct qib_devdata *); + /* hard reset chip */ + int (*f_reset)(struct qib_devdata *); + void (*f_quiet_serdes)(struct qib_pportdata *); + int (*f_bringup_serdes)(struct qib_pportdata *); + int (*f_early_init)(struct qib_devdata *); + void (*f_clear_tids)(struct qib_devdata *, struct qib_ctxtdata *); + void (*f_put_tid)(struct qib_devdata *, u64 __iomem*, + u32, unsigned long); + void (*f_cleanup)(struct qib_devdata *); + void (*f_setextled)(struct qib_pportdata *, u32); + /* fill out chip-specific fields */ + int (*f_get_base_info)(struct qib_ctxtdata *, struct qib_base_info *); + /* free irq */ + void (*f_free_irq)(struct qib_devdata *); + struct qib_message_header *(*f_get_msgheader) + (struct qib_devdata *, __le32 *); + void (*f_config_ctxts)(struct qib_devdata *); + int (*f_get_ib_cfg)(struct qib_pportdata *, int); + int (*f_set_ib_cfg)(struct qib_pportdata *, int, u32); + int (*f_set_ib_loopback)(struct qib_pportdata *, const char *); + int (*f_get_ib_table)(struct qib_pportdata *, int, void *); + int (*f_set_ib_table)(struct qib_pportdata *, int, void *); + u32 (*f_iblink_state)(u64); + u8 (*f_ibphys_portstate)(u64); + void (*f_xgxs_reset)(struct qib_pportdata *); + /* per chip actions needed for IB Link up/down changes */ + int (*f_ib_updown)(struct qib_pportdata *, int, u64); + u32 __iomem *(*f_getsendbuf)(struct qib_pportdata *, u64, u32 *); + /* Read/modify/write of GPIO pins (potentially chip-specific */ + int (*f_gpio_mod)(struct qib_devdata *dd, u32 out, u32 dir, + u32 mask); + /* Enable writes to config EEPROM (if supported) */ + int (*f_eeprom_wen)(struct qib_devdata *dd, int wen); + /* + * modify rcvctrl shadow[s] and write to appropriate chip-regs. + * see above QIB_RCVCTRL_xxx_ENB/DIS for operations. + * (ctxt == -1) means "all contexts", only meaningful for + * clearing. Could remove if chip_spec shutdown properly done. + */ + void (*f_rcvctrl)(struct qib_pportdata *, unsigned int op, + int ctxt); + /* Read/modify/write sendctrl appropriately for op and port. */ + void (*f_sendctrl)(struct qib_pportdata *, u32 op); + void (*f_set_intr_state)(struct qib_devdata *, u32); + void (*f_set_armlaunch)(struct qib_devdata *, u32); + void (*f_wantpiobuf_intr)(struct qib_devdata *, u32); + int (*f_late_initreg)(struct qib_devdata *); + int (*f_init_sdma_regs)(struct qib_pportdata *); + u16 (*f_sdma_gethead)(struct qib_pportdata *); + int (*f_sdma_busy)(struct qib_pportdata *); + void (*f_sdma_update_tail)(struct qib_pportdata *, u16); + void (*f_sdma_set_desc_cnt)(struct qib_pportdata *, unsigned); + void (*f_sdma_sendctrl)(struct qib_pportdata *, unsigned); + void (*f_sdma_hw_clean_up)(struct qib_pportdata *); + void (*f_sdma_hw_start_up)(struct qib_pportdata *); + void (*f_sdma_init_early)(struct qib_pportdata *); + void (*f_set_cntr_sample)(struct qib_pportdata *, u32, u32); + void (*f_update_usrhead)(struct qib_ctxtdata *, u64, u32, u32, u32); + u32 (*f_hdrqempty)(struct qib_ctxtdata *); + u64 (*f_portcntr)(struct qib_pportdata *, u32); + u32 (*f_read_cntrs)(struct qib_devdata *, loff_t, char **, + u64 **); + u32 (*f_read_portcntrs)(struct qib_devdata *, loff_t, u32, + char **, u64 **); + u32 (*f_setpbc_control)(struct qib_pportdata *, u32, u8, u8); + void (*f_initvl15_bufs)(struct qib_devdata *); + void (*f_init_ctxt)(struct qib_ctxtdata *); + void (*f_txchk_change)(struct qib_devdata *, u32, u32, u32, + struct qib_ctxtdata *); + void (*f_writescratch)(struct qib_devdata *, u32); + int (*f_tempsense_rd)(struct qib_devdata *, int regnum); +#ifdef CONFIG_INFINIBAND_QIB_DCA + int (*f_notify_dca)(struct qib_devdata *, unsigned long event); +#endif + + char *boardname; /* human readable board info */ + + /* template for writing TIDs */ + u64 tidtemplate; + /* value to write to free TIDs */ + u64 tidinvalid; + + /* number of registers used for pioavail */ + u32 pioavregs; + /* device (not port) flags, basically device capabilities */ + u32 flags; + /* last buffer for user use */ + u32 lastctxt_piobuf; + + /* reset value */ + u64 z_int_counter; + /* percpu intcounter */ + u64 __percpu *int_counter; + + /* pio bufs allocated per ctxt */ + u32 pbufsctxt; + /* if remainder on bufs/ctxt, ctxts < extrabuf get 1 extra */ + u32 ctxts_extrabuf; + /* + * number of ctxts configured as max; zero is set to number chip + * supports, less gives more pio bufs/ctxt, etc. + */ + u32 cfgctxts; + /* + * number of ctxts available for PSM open + */ + u32 freectxts; + + /* + * hint that we should update pioavailshadow before + * looking for a PIO buffer + */ + u32 upd_pio_shadow; + + /* internal debugging stats */ + u32 maxpkts_call; + u32 avgpkts_call; + u64 nopiobufs; + + /* PCI Vendor ID (here for NodeInfo) */ + u16 vendorid; + /* PCI Device ID (here for NodeInfo) */ + u16 deviceid; + /* for write combining settings */ + int wc_cookie; + unsigned long wc_base; + unsigned long wc_len; + + /* shadow copy of struct page *'s for exp tid pages */ + struct page **pageshadow; + /* shadow copy of dma handles for exp tid pages */ + dma_addr_t *physshadow; + u64 __iomem *egrtidbase; + spinlock_t sendctrl_lock; /* protect changes to sendctrl shadow */ + /* around rcd and (user ctxts) ctxt_cnt use (intr vs free) */ + spinlock_t uctxt_lock; /* rcd and user context changes */ + /* + * per unit status, see also portdata statusp + * mapped readonly into user processes so they can get unit and + * IB link status cheaply + */ + u64 *devstatusp; + char *freezemsg; /* freeze msg if hw error put chip in freeze */ + u32 freezelen; /* max length of freezemsg */ + /* timer used to prevent stats overflow, error throttling, etc. */ + struct timer_list stats_timer; + + /* timer to verify interrupts work, and fallback if possible */ + struct timer_list intrchk_timer; + unsigned long ureg_align; /* user register alignment */ + + /* + * Protects pioavailshadow, pioavailkernel, pio_need_disarm, and + * pio_writing. + */ + spinlock_t pioavail_lock; + /* + * index of last buffer to optimize search for next + */ + u32 last_pio; + /* + * min kernel pio buffer to optimize search + */ + u32 min_kernel_pio; + /* + * Shadow copies of registers; size indicates read access size. + * Most of them are readonly, but some are write-only register, + * where we manipulate the bits in the shadow copy, and then write + * the shadow copy to qlogic_ib. + * + * We deliberately make most of these 32 bits, since they have + * restricted range. For any that we read, we won't to generate 32 + * bit accesses, since Opteron will generate 2 separate 32 bit HT + * transactions for a 64 bit read, and we want to avoid unnecessary + * bus transactions. + */ + + /* This is the 64 bit group */ + + unsigned long pioavailshadow[6]; + /* bitmap of send buffers available for the kernel to use with PIO. */ + unsigned long pioavailkernel[6]; + /* bitmap of send buffers which need to be disarmed. */ + unsigned long pio_need_disarm[3]; + /* bitmap of send buffers which are being written to. */ + unsigned long pio_writing[3]; + /* kr_revision shadow */ + u64 revision; + /* Base GUID for device (from eeprom, network order) */ + __be64 base_guid; + + /* + * kr_sendpiobufbase value (chip offset of pio buffers), and the + * base of the 2KB buffer s(user processes only use 2K) + */ + u64 piobufbase; + u32 pio2k_bufbase; + + /* these are the "32 bit" regs */ + + /* number of GUIDs in the flash for this interface */ + u32 nguid; + /* + * the following two are 32-bit bitmasks, but {test,clear,set}_bit + * all expect bit fields to be "unsigned long" + */ + unsigned long rcvctrl; /* shadow per device rcvctrl */ + unsigned long sendctrl; /* shadow per device sendctrl */ + + /* value we put in kr_rcvhdrcnt */ + u32 rcvhdrcnt; + /* value we put in kr_rcvhdrsize */ + u32 rcvhdrsize; + /* value we put in kr_rcvhdrentsize */ + u32 rcvhdrentsize; + /* kr_ctxtcnt value */ + u32 ctxtcnt; + /* kr_pagealign value */ + u32 palign; + /* number of "2KB" PIO buffers */ + u32 piobcnt2k; + /* size in bytes of "2KB" PIO buffers */ + u32 piosize2k; + /* max usable size in dwords of a "2KB" PIO buffer before going "4KB" */ + u32 piosize2kmax_dwords; + /* number of "4KB" PIO buffers */ + u32 piobcnt4k; + /* size in bytes of "4KB" PIO buffers */ + u32 piosize4k; + /* kr_rcvegrbase value */ + u32 rcvegrbase; + /* kr_rcvtidbase value */ + u32 rcvtidbase; + /* kr_rcvtidcnt value */ + u32 rcvtidcnt; + /* kr_userregbase */ + u32 uregbase; + /* shadow the control register contents */ + u32 control; + + /* chip address space used by 4k pio buffers */ + u32 align4k; + /* size of each rcvegrbuffer */ + u16 rcvegrbufsize; + /* log2 of above */ + u16 rcvegrbufsize_shift; + /* localbus width (1, 2,4,8,16,32) from config space */ + u32 lbus_width; + /* localbus speed in MHz */ + u32 lbus_speed; + int unit; /* unit # of this chip */ + + /* start of CHIP_SPEC move to chipspec, but need code changes */ + /* low and high portions of MSI capability/vector */ + u32 msi_lo; + /* saved after PCIe init for restore after reset */ + u32 msi_hi; + /* MSI data (vector) saved for restore */ + u16 msi_data; + /* so we can rewrite it after a chip reset */ + u32 pcibar0; + /* so we can rewrite it after a chip reset */ + u32 pcibar1; + u64 rhdrhead_intr_off; + + /* + * ASCII serial number, from flash, large enough for original + * all digit strings, and longer QLogic serial number format + */ + u8 serial[16]; + /* human readable board version */ + u8 boardversion[96]; + u8 lbus_info[32]; /* human readable localbus info */ + /* chip major rev, from qib_revision */ + u8 majrev; + /* chip minor rev, from qib_revision */ + u8 minrev; + + /* Misc small ints */ + /* Number of physical ports available */ + u8 num_pports; + /* Lowest context number which can be used by user processes */ + u8 first_user_ctxt; + u8 n_krcv_queues; + u8 qpn_mask; + u8 skip_kctxt_mask; + + u16 rhf_offset; /* offset of RHF within receive header entry */ + + /* + * GPIO pins for twsi-connected devices, and device code for eeprom + */ + u8 gpio_sda_num; + u8 gpio_scl_num; + u8 twsi_eeprom_dev; + u8 board_atten; + + /* Support (including locks) for EEPROM logging of errors and time */ + /* control access to actual counters, timer */ + spinlock_t eep_st_lock; + /* control high-level access to EEPROM */ + struct mutex eep_lock; + uint64_t traffic_wds; + /* + * masks for which bits of errs, hwerrs that cause + * each of the counters to increment. + */ + struct qib_eep_log_mask eep_st_masks[QIB_EEP_LOG_CNT]; + struct qib_diag_client *diag_client; + spinlock_t qib_diag_trans_lock; /* protect diag observer ops */ + struct diag_observer_list_elt *diag_observer_list; + + u8 psxmitwait_supported; + /* cycle length of PS* counters in HW (in picoseconds) */ + u16 psxmitwait_check_rate; + /* high volume overflow errors defered to tasklet */ + struct tasklet_struct error_tasklet; + /* per device cq worker */ + struct kthread_worker *worker; + + int assigned_node_id; /* NUMA node closest to HCA */ +}; + +/* hol_state values */ +#define QIB_HOL_UP 0 +#define QIB_HOL_INIT 1 + +#define QIB_SDMA_SENDCTRL_OP_ENABLE (1U << 0) +#define QIB_SDMA_SENDCTRL_OP_INTENABLE (1U << 1) +#define QIB_SDMA_SENDCTRL_OP_HALT (1U << 2) +#define QIB_SDMA_SENDCTRL_OP_CLEANUP (1U << 3) +#define QIB_SDMA_SENDCTRL_OP_DRAIN (1U << 4) + +/* operation types for f_txchk_change() */ +#define TXCHK_CHG_TYPE_DIS1 3 +#define TXCHK_CHG_TYPE_ENAB1 2 +#define TXCHK_CHG_TYPE_KERN 1 +#define TXCHK_CHG_TYPE_USER 0 + +#define QIB_CHASE_TIME msecs_to_jiffies(145) +#define QIB_CHASE_DIS_TIME msecs_to_jiffies(160) + +/* Private data for file operations */ +struct qib_filedata { + struct qib_ctxtdata *rcd; + unsigned subctxt; + unsigned tidcursor; + struct qib_user_sdma_queue *pq; + int rec_cpu_num; /* for cpu affinity; -1 if none */ +}; + +extern struct list_head qib_dev_list; +extern spinlock_t qib_devs_lock; +extern struct qib_devdata *qib_lookup(int unit); +extern u32 qib_cpulist_count; +extern unsigned long *qib_cpulist; + +extern unsigned qib_cc_table_size; +int qib_init(struct qib_devdata *, int); +int init_chip_wc_pat(struct qib_devdata *dd, u32); +int qib_enable_wc(struct qib_devdata *dd); +void qib_disable_wc(struct qib_devdata *dd); +int qib_count_units(int *npresentp, int *nupp); +int qib_count_active_units(void); + +int qib_cdev_init(int minor, const char *name, + const struct file_operations *fops, + struct cdev **cdevp, struct device **devp); +void qib_cdev_cleanup(struct cdev **cdevp, struct device **devp); +int qib_dev_init(void); +void qib_dev_cleanup(void); + +int qib_diag_add(struct qib_devdata *); +void qib_diag_remove(struct qib_devdata *); +void qib_handle_e_ibstatuschanged(struct qib_pportdata *, u64); +void qib_sdma_update_tail(struct qib_pportdata *, u16); /* hold sdma_lock */ + +int qib_decode_err(struct qib_devdata *dd, char *buf, size_t blen, u64 err); +void qib_bad_intrstatus(struct qib_devdata *); +void qib_handle_urcv(struct qib_devdata *, u64); + +/* clean up any per-chip chip-specific stuff */ +void qib_chip_cleanup(struct qib_devdata *); +/* clean up any chip type-specific stuff */ +void qib_chip_done(void); + +/* check to see if we have to force ordering for write combining */ +int qib_unordered_wc(void); +void qib_pio_copy(void __iomem *to, const void *from, size_t count); + +void qib_disarm_piobufs(struct qib_devdata *, unsigned, unsigned); +int qib_disarm_piobufs_ifneeded(struct qib_ctxtdata *); +void qib_disarm_piobufs_set(struct qib_devdata *, unsigned long *, unsigned); +void qib_cancel_sends(struct qib_pportdata *); + +int qib_create_rcvhdrq(struct qib_devdata *, struct qib_ctxtdata *); +int qib_setup_eagerbufs(struct qib_ctxtdata *); +void qib_set_ctxtcnt(struct qib_devdata *); +int qib_create_ctxts(struct qib_devdata *dd); +struct qib_ctxtdata *qib_create_ctxtdata(struct qib_pportdata *, u32, int); +int qib_init_pportdata(struct qib_pportdata *, struct qib_devdata *, u8, u8); +void qib_free_ctxtdata(struct qib_devdata *, struct qib_ctxtdata *); + +u32 qib_kreceive(struct qib_ctxtdata *, u32 *, u32 *); +int qib_reset_device(int); +int qib_wait_linkstate(struct qib_pportdata *, u32, int); +int qib_set_linkstate(struct qib_pportdata *, u8); +int qib_set_mtu(struct qib_pportdata *, u16); +int qib_set_lid(struct qib_pportdata *, u32, u8); +void qib_hol_down(struct qib_pportdata *); +void qib_hol_init(struct qib_pportdata *); +void qib_hol_up(struct qib_pportdata *); +void qib_hol_event(unsigned long); +void qib_disable_after_error(struct qib_devdata *); +int qib_set_uevent_bits(struct qib_pportdata *, const int); + +/* for use in system calls, where we want to know device type, etc. */ +#define ctxt_fp(fp) \ + (((struct qib_filedata *)(fp)->private_data)->rcd) +#define subctxt_fp(fp) \ + (((struct qib_filedata *)(fp)->private_data)->subctxt) +#define tidcursor_fp(fp) \ + (((struct qib_filedata *)(fp)->private_data)->tidcursor) +#define user_sdma_queue_fp(fp) \ + (((struct qib_filedata *)(fp)->private_data)->pq) + +static inline struct qib_devdata *dd_from_ppd(struct qib_pportdata *ppd) +{ + return ppd->dd; +} + +static inline struct qib_devdata *dd_from_dev(struct qib_ibdev *dev) +{ + return container_of(dev, struct qib_devdata, verbs_dev); +} + +static inline struct qib_devdata *dd_from_ibdev(struct ib_device *ibdev) +{ + return dd_from_dev(to_idev(ibdev)); +} + +static inline struct qib_pportdata *ppd_from_ibp(struct qib_ibport *ibp) +{ + return container_of(ibp, struct qib_pportdata, ibport_data); +} + +static inline struct qib_ibport *to_iport(struct ib_device *ibdev, u8 port) +{ + struct qib_devdata *dd = dd_from_ibdev(ibdev); + unsigned pidx = port - 1; /* IB number port from 1, hdw from 0 */ + + WARN_ON(pidx >= dd->num_pports); + return &dd->pport[pidx].ibport_data; +} + +/* + * values for dd->flags (_device_ related flags) and + */ +#define QIB_HAS_LINK_LATENCY 0x1 /* supports link latency (IB 1.2) */ +#define QIB_INITTED 0x2 /* chip and driver up and initted */ +#define QIB_DOING_RESET 0x4 /* in the middle of doing chip reset */ +#define QIB_PRESENT 0x8 /* chip accesses can be done */ +#define QIB_PIO_FLUSH_WC 0x10 /* Needs Write combining flush for PIO */ +#define QIB_HAS_THRESH_UPDATE 0x40 +#define QIB_HAS_SDMA_TIMEOUT 0x80 +#define QIB_USE_SPCL_TRIG 0x100 /* SpecialTrigger launch enabled */ +#define QIB_NODMA_RTAIL 0x200 /* rcvhdrtail register DMA enabled */ +#define QIB_HAS_INTX 0x800 /* Supports INTx interrupts */ +#define QIB_HAS_SEND_DMA 0x1000 /* Supports Send DMA */ +#define QIB_HAS_VLSUPP 0x2000 /* Supports multiple VLs; PBC different */ +#define QIB_HAS_HDRSUPP 0x4000 /* Supports header suppression */ +#define QIB_BADINTR 0x8000 /* severe interrupt problems */ +#define QIB_DCA_ENABLED 0x10000 /* Direct Cache Access enabled */ +#define QIB_HAS_QSFP 0x20000 /* device (card instance) has QSFP */ + +/* + * values for ppd->lflags (_ib_port_ related flags) + */ +#define QIBL_LINKV 0x1 /* IB link state valid */ +#define QIBL_LINKDOWN 0x8 /* IB link is down */ +#define QIBL_LINKINIT 0x10 /* IB link level is up */ +#define QIBL_LINKARMED 0x20 /* IB link is ARMED */ +#define QIBL_LINKACTIVE 0x40 /* IB link is ACTIVE */ +/* leave a gap for more IB-link state */ +#define QIBL_IB_AUTONEG_INPROG 0x1000 /* non-IBTA DDR/QDR neg active */ +#define QIBL_IB_AUTONEG_FAILED 0x2000 /* non-IBTA DDR/QDR neg failed */ +#define QIBL_IB_LINK_DISABLED 0x4000 /* Linkdown-disable forced, + * Do not try to bring up */ +#define QIBL_IB_FORCE_NOTIFY 0x8000 /* force notify on next ib change */ + +/* IB dword length mask in PBC (lower 11 bits); same for all chips */ +#define QIB_PBC_LENGTH_MASK ((1 << 11) - 1) + + +/* ctxt_flag bit offsets */ + /* waiting for a packet to arrive */ +#define QIB_CTXT_WAITING_RCV 2 + /* master has not finished initializing */ +#define QIB_CTXT_MASTER_UNINIT 4 + /* waiting for an urgent packet to arrive */ +#define QIB_CTXT_WAITING_URG 5 + +/* free up any allocated data at closes */ +void qib_free_data(struct qib_ctxtdata *dd); +void qib_chg_pioavailkernel(struct qib_devdata *, unsigned, unsigned, + u32, struct qib_ctxtdata *); +struct qib_devdata *qib_init_iba7322_funcs(struct pci_dev *, + const struct pci_device_id *); +struct qib_devdata *qib_init_iba7220_funcs(struct pci_dev *, + const struct pci_device_id *); +struct qib_devdata *qib_init_iba6120_funcs(struct pci_dev *, + const struct pci_device_id *); +void qib_free_devdata(struct qib_devdata *); +struct qib_devdata *qib_alloc_devdata(struct pci_dev *pdev, size_t extra); + +#define QIB_TWSI_NO_DEV 0xFF +/* Below qib_twsi_ functions must be called with eep_lock held */ +int qib_twsi_reset(struct qib_devdata *dd); +int qib_twsi_blk_rd(struct qib_devdata *dd, int dev, int addr, void *buffer, + int len); +int qib_twsi_blk_wr(struct qib_devdata *dd, int dev, int addr, + const void *buffer, int len); +void qib_get_eeprom_info(struct qib_devdata *); +#define qib_inc_eeprom_err(dd, eidx, incr) +void qib_dump_lookup_output_queue(struct qib_devdata *); +void qib_force_pio_avail_update(struct qib_devdata *); +void qib_clear_symerror_on_linkup(unsigned long opaque); + +/* + * Set LED override, only the two LSBs have "public" meaning, but + * any non-zero value substitutes them for the Link and LinkTrain + * LED states. + */ +#define QIB_LED_PHYS 1 /* Physical (linktraining) GREEN LED */ +#define QIB_LED_LOG 2 /* Logical (link) YELLOW LED */ +void qib_set_led_override(struct qib_pportdata *ppd, unsigned int val); + +/* send dma routines */ +int qib_setup_sdma(struct qib_pportdata *); +void qib_teardown_sdma(struct qib_pportdata *); +void __qib_sdma_intr(struct qib_pportdata *); +void qib_sdma_intr(struct qib_pportdata *); +void qib_user_sdma_send_desc(struct qib_pportdata *dd, + struct list_head *pktlist); +int qib_sdma_verbs_send(struct qib_pportdata *, struct qib_sge_state *, + u32, struct qib_verbs_txreq *); +/* ppd->sdma_lock should be locked before calling this. */ +int qib_sdma_make_progress(struct qib_pportdata *dd); + +static inline int qib_sdma_empty(const struct qib_pportdata *ppd) +{ + return ppd->sdma_descq_added == ppd->sdma_descq_removed; +} + +/* must be called under qib_sdma_lock */ +static inline u16 qib_sdma_descq_freecnt(const struct qib_pportdata *ppd) +{ + return ppd->sdma_descq_cnt - + (ppd->sdma_descq_added - ppd->sdma_descq_removed) - 1; +} + +static inline int __qib_sdma_running(struct qib_pportdata *ppd) +{ + return ppd->sdma_state.current_state == qib_sdma_state_s99_running; +} +int qib_sdma_running(struct qib_pportdata *); +void dump_sdma_state(struct qib_pportdata *ppd); +void __qib_sdma_process_event(struct qib_pportdata *, enum qib_sdma_events); +void qib_sdma_process_event(struct qib_pportdata *, enum qib_sdma_events); + +/* + * number of words used for protocol header if not set by qib_userinit(); + */ +#define QIB_DFLT_RCVHDRSIZE 9 + +/* + * We need to be able to handle an IB header of at least 24 dwords. + * We need the rcvhdrq large enough to handle largest IB header, but + * still have room for a 2KB MTU standard IB packet. + * Additionally, some processor/memory controller combinations + * benefit quite strongly from having the DMA'ed data be cacheline + * aligned and a cacheline multiple, so we set the size to 32 dwords + * (2 64-byte primary cachelines for pretty much all processors of + * interest). The alignment hurts nothing, other than using somewhat + * more memory. + */ +#define QIB_RCVHDR_ENTSIZE 32 + +int qib_get_user_pages(unsigned long, size_t, struct page **); +void qib_release_user_pages(struct page **, size_t); +int qib_eeprom_read(struct qib_devdata *, u8, void *, int); +int qib_eeprom_write(struct qib_devdata *, u8, const void *, int); +u32 __iomem *qib_getsendbuf_range(struct qib_devdata *, u32 *, u32, u32); +void qib_sendbuf_done(struct qib_devdata *, unsigned); + +static inline void qib_clear_rcvhdrtail(const struct qib_ctxtdata *rcd) +{ + *((u64 *) rcd->rcvhdrtail_kvaddr) = 0ULL; +} + +static inline u32 qib_get_rcvhdrtail(const struct qib_ctxtdata *rcd) +{ + /* + * volatile because it's a DMA target from the chip, routine is + * inlined, and don't want register caching or reordering. + */ + return (u32) le64_to_cpu( + *((volatile __le64 *)rcd->rcvhdrtail_kvaddr)); /* DMA'ed */ +} + +static inline u32 qib_get_hdrqtail(const struct qib_ctxtdata *rcd) +{ + const struct qib_devdata *dd = rcd->dd; + u32 hdrqtail; + + if (dd->flags & QIB_NODMA_RTAIL) { + __le32 *rhf_addr; + u32 seq; + + rhf_addr = (__le32 *) rcd->rcvhdrq + + rcd->head + dd->rhf_offset; + seq = qib_hdrget_seq(rhf_addr); + hdrqtail = rcd->head; + if (seq == rcd->seq_cnt) + hdrqtail++; + } else + hdrqtail = qib_get_rcvhdrtail(rcd); + + return hdrqtail; +} + +/* + * sysfs interface. + */ + +extern const char ib_qib_version[]; + +int qib_device_create(struct qib_devdata *); +void qib_device_remove(struct qib_devdata *); + +int qib_create_port_files(struct ib_device *ibdev, u8 port_num, + struct kobject *kobj); +int qib_verbs_register_sysfs(struct qib_devdata *); +void qib_verbs_unregister_sysfs(struct qib_devdata *); +/* Hook for sysfs read of QSFP */ +extern int qib_qsfp_dump(struct qib_pportdata *ppd, char *buf, int len); + +int __init qib_init_qibfs(void); +int __exit qib_exit_qibfs(void); + +int qibfs_add(struct qib_devdata *); +int qibfs_remove(struct qib_devdata *); + +int qib_pcie_init(struct pci_dev *, const struct pci_device_id *); +int qib_pcie_ddinit(struct qib_devdata *, struct pci_dev *, + const struct pci_device_id *); +void qib_pcie_ddcleanup(struct qib_devdata *); +int qib_pcie_params(struct qib_devdata *, u32, u32 *, struct qib_msix_entry *); +int qib_reinit_intr(struct qib_devdata *); +void qib_enable_intx(struct pci_dev *); +void qib_nomsi(struct qib_devdata *); +void qib_nomsix(struct qib_devdata *); +void qib_pcie_getcmd(struct qib_devdata *, u16 *, u8 *, u8 *); +void qib_pcie_reenable(struct qib_devdata *, u16, u8, u8); +/* interrupts for device */ +u64 qib_int_counter(struct qib_devdata *); +/* interrupt for all devices */ +u64 qib_sps_ints(void); + +/* + * dma_addr wrappers - all 0's invalid for hw + */ +dma_addr_t qib_map_page(struct pci_dev *, struct page *, unsigned long, + size_t, int); +const char *qib_get_unit_name(int unit); + +/* + * Flush write combining store buffers (if present) and perform a write + * barrier. + */ +static inline void qib_flush_wc(void) +{ +#if defined(CONFIG_X86_64) + asm volatile("sfence" : : : "memory"); +#else + wmb(); /* no reorder around wc flush */ +#endif +} + +/* global module parameter variables */ +extern unsigned qib_ibmtu; +extern ushort qib_cfgctxts; +extern ushort qib_num_cfg_vls; +extern ushort qib_mini_init; /* If set, do few (ideally 0) writes to chip */ +extern unsigned qib_n_krcv_queues; +extern unsigned qib_sdma_fetch_arb; +extern unsigned qib_compat_ddr_negotiate; +extern int qib_special_trigger; +extern unsigned qib_numa_aware; + +extern struct mutex qib_mutex; + +/* Number of seconds before our card status check... */ +#define STATUS_TIMEOUT 60 + +#define QIB_DRV_NAME "ib_qib" +#define QIB_USER_MINOR_BASE 0 +#define QIB_TRACE_MINOR 127 +#define QIB_DIAGPKT_MINOR 128 +#define QIB_DIAG_MINOR_BASE 129 +#define QIB_NMINORS 255 + +#define PCI_VENDOR_ID_PATHSCALE 0x1fc1 +#define PCI_VENDOR_ID_QLOGIC 0x1077 +#define PCI_DEVICE_ID_QLOGIC_IB_6120 0x10 +#define PCI_DEVICE_ID_QLOGIC_IB_7220 0x7220 +#define PCI_DEVICE_ID_QLOGIC_IB_7322 0x7322 + +/* + * qib_early_err is used (only!) to print early errors before devdata is + * allocated, or when dd->pcidev may not be valid, and at the tail end of + * cleanup when devdata may have been freed, etc. qib_dev_porterr is + * the same as qib_dev_err, but is used when the message really needs + * the IB port# to be definitive as to what's happening.. + * All of these go to the trace log, and the trace log entry is done + * first to avoid possible serial port delays from printk. + */ +#define qib_early_err(dev, fmt, ...) \ + dev_err(dev, fmt, ##__VA_ARGS__) + +#define qib_dev_err(dd, fmt, ...) \ + dev_err(&(dd)->pcidev->dev, "%s: " fmt, \ + qib_get_unit_name((dd)->unit), ##__VA_ARGS__) + +#define qib_dev_warn(dd, fmt, ...) \ + dev_warn(&(dd)->pcidev->dev, "%s: " fmt, \ + qib_get_unit_name((dd)->unit), ##__VA_ARGS__) + +#define qib_dev_porterr(dd, port, fmt, ...) \ + dev_err(&(dd)->pcidev->dev, "%s: IB%u:%u " fmt, \ + qib_get_unit_name((dd)->unit), (dd)->unit, (port), \ + ##__VA_ARGS__) + +#define qib_devinfo(pcidev, fmt, ...) \ + dev_info(&(pcidev)->dev, fmt, ##__VA_ARGS__) + +/* + * this is used for formatting hw error messages... + */ +struct qib_hwerror_msgs { + u64 mask; + const char *msg; + size_t sz; +}; + +#define QLOGIC_IB_HWE_MSG(a, b) { .mask = a, .msg = b } + +/* in qib_intr.c... */ +void qib_format_hwerrors(u64 hwerrs, + const struct qib_hwerror_msgs *hwerrmsgs, + size_t nhwerrmsgs, char *msg, size_t lmsg); +#endif /* _QIB_KERNEL_H */ |