diff options
Diffstat (limited to 'kernel/drivers/iio/accel/Kconfig')
| -rw-r--r-- | kernel/drivers/iio/accel/Kconfig | 139 |
1 files changed, 139 insertions, 0 deletions
diff --git a/kernel/drivers/iio/accel/Kconfig b/kernel/drivers/iio/accel/Kconfig new file mode 100644 index 000000000..7c9a9a94a --- /dev/null +++ b/kernel/drivers/iio/accel/Kconfig @@ -0,0 +1,139 @@ +# +# Accelerometer drivers +# +# When adding new entries keep the list in alphabetical order + +menu "Accelerometers" + +config BMA180 + tristate "Bosch BMA180/BMA250 3-Axis Accelerometer Driver" + depends on I2C + select IIO_BUFFER + select IIO_TRIGGERED_BUFFER + help + Say Y here if you want to build a driver for the Bosch BMA180 or + BMA250 triaxial acceleration sensor. + + To compile this driver as a module, choose M here: the + module will be called bma180. + +config BMC150_ACCEL + tristate "Bosch BMC150 Accelerometer Driver" + depends on I2C + select IIO_BUFFER + select IIO_TRIGGERED_BUFFER + help + Say yes here to build support for the following Bosch accelerometers: + BMC150, BMI055, BMA250E, BMA222E, BMA255, BMA280. + + Currently this only supports the device via an i2c interface. + + This is a combo module with both accelerometer and magnetometer. + This driver is only implementing accelerometer part, which has + its own address and register map. + +config HID_SENSOR_ACCEL_3D + depends on HID_SENSOR_HUB + select IIO_BUFFER + select IIO_TRIGGERED_BUFFER + select HID_SENSOR_IIO_COMMON + select HID_SENSOR_IIO_TRIGGER + tristate "HID Accelerometers 3D" + help + Say yes here to build support for the HID SENSOR + accelerometers 3D. + + To compile this driver as a module, choose M here: the + module will be called hid-sensor-accel-3d. + +config IIO_ST_ACCEL_3AXIS + tristate "STMicroelectronics accelerometers 3-Axis Driver" + depends on (I2C || SPI_MASTER) && SYSFS + select IIO_ST_SENSORS_CORE + select IIO_ST_ACCEL_I2C_3AXIS if (I2C) + select IIO_ST_ACCEL_SPI_3AXIS if (SPI_MASTER) + select IIO_TRIGGERED_BUFFER if (IIO_BUFFER) + help + Say yes here to build support for STMicroelectronics accelerometers: + LSM303DLH, LSM303DLHC, LIS3DH, LSM330D, LSM330DL, LSM330DLC, + LIS331DLH, LSM303DL, LSM303DLM, LSM330. + + This driver can also be built as a module. If so, these modules + will be created: + - st_accel (core functions for the driver [it is mandatory]); + - st_accel_i2c (necessary for the I2C devices [optional*]); + - st_accel_spi (necessary for the SPI devices [optional*]); + + (*) one of these is necessary to do something. + +config IIO_ST_ACCEL_I2C_3AXIS + tristate + depends on IIO_ST_ACCEL_3AXIS + depends on IIO_ST_SENSORS_I2C + +config IIO_ST_ACCEL_SPI_3AXIS + tristate + depends on IIO_ST_ACCEL_3AXIS + depends on IIO_ST_SENSORS_SPI + +config KXSD9 + tristate "Kionix KXSD9 Accelerometer Driver" + depends on SPI + help + Say yes here to build support for the Kionix KXSD9 accelerometer. + Currently this only supports the device via an SPI interface. + + To compile this driver as a module, choose M here: the module + will be called kxsd9. + +config MMA8452 + tristate "Freescale MMA8452Q Accelerometer Driver" + depends on I2C + select IIO_BUFFER + select IIO_TRIGGERED_BUFFER + help + Say yes here to build support for the Freescale MMA8452Q 3-axis + accelerometer. + + To compile this driver as a module, choose M here: the module + will be called mma8452. + +config KXCJK1013 + tristate "Kionix 3-Axis Accelerometer Driver" + depends on I2C + select IIO_BUFFER + select IIO_TRIGGERED_BUFFER + help + Say Y here if you want to build a driver for the Kionix KXCJK-1013 + triaxial acceleration sensor. This driver also supports KXCJ9-1008 + and KXTJ2-1009. + + To compile this driver as a module, choose M here: the module will + be called kxcjk-1013. + +config MMA9551_CORE + tristate + +config MMA9551 + tristate "Freescale MMA9551L Intelligent Motion-Sensing Platform Driver" + depends on I2C + select MMA9551_CORE + + help + Say yes here to build support for the Freescale MMA9551L + Intelligent Motion-Sensing Platform Driver. + + To compile this driver as a module, choose M here: the module + will be called mma9551. + +config MMA9553 + tristate "Freescale MMA9553L Intelligent Pedometer Platform Driver" + depends on I2C + select MMA9551_CORE + help + Say yes here to build support for the Freescale MMA9553L + Intelligent Pedometer Platform Driver. + + To compile this driver as a module, choose M here: the module + will be called mma9553. +endmenu |