summaryrefslogtreecommitdiffstats
path: root/kernel/drivers/ide/setup-pci.c
diff options
context:
space:
mode:
Diffstat (limited to 'kernel/drivers/ide/setup-pci.c')
-rw-r--r--kernel/drivers/ide/setup-pci.c665
1 files changed, 665 insertions, 0 deletions
diff --git a/kernel/drivers/ide/setup-pci.c b/kernel/drivers/ide/setup-pci.c
new file mode 100644
index 000000000..112d2fe1b
--- /dev/null
+++ b/kernel/drivers/ide/setup-pci.c
@@ -0,0 +1,665 @@
+/*
+ * Copyright (C) 1998-2000 Andre Hedrick <andre@linux-ide.org>
+ * Copyright (C) 1995-1998 Mark Lord
+ * Copyright (C) 2007-2009 Bartlomiej Zolnierkiewicz
+ *
+ * May be copied or modified under the terms of the GNU General Public License
+ */
+
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/export.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/ide.h>
+#include <linux/dma-mapping.h>
+
+#include <asm/io.h>
+
+/**
+ * ide_setup_pci_baseregs - place a PCI IDE controller native
+ * @dev: PCI device of interface to switch native
+ * @name: Name of interface
+ *
+ * We attempt to place the PCI interface into PCI native mode. If
+ * we succeed the BARs are ok and the controller is in PCI mode.
+ * Returns 0 on success or an errno code.
+ *
+ * FIXME: if we program the interface and then fail to set the BARS
+ * we don't switch it back to legacy mode. Do we actually care ??
+ */
+
+static int ide_setup_pci_baseregs(struct pci_dev *dev, const char *name)
+{
+ u8 progif = 0;
+
+ /*
+ * Place both IDE interfaces into PCI "native" mode:
+ */
+ if (pci_read_config_byte(dev, PCI_CLASS_PROG, &progif) ||
+ (progif & 5) != 5) {
+ if ((progif & 0xa) != 0xa) {
+ printk(KERN_INFO "%s %s: device not capable of full "
+ "native PCI mode\n", name, pci_name(dev));
+ return -EOPNOTSUPP;
+ }
+ printk(KERN_INFO "%s %s: placing both ports into native PCI "
+ "mode\n", name, pci_name(dev));
+ (void) pci_write_config_byte(dev, PCI_CLASS_PROG, progif|5);
+ if (pci_read_config_byte(dev, PCI_CLASS_PROG, &progif) ||
+ (progif & 5) != 5) {
+ printk(KERN_ERR "%s %s: rewrite of PROGIF failed, "
+ "wanted 0x%04x, got 0x%04x\n",
+ name, pci_name(dev), progif | 5, progif);
+ return -EOPNOTSUPP;
+ }
+ }
+ return 0;
+}
+
+#ifdef CONFIG_BLK_DEV_IDEDMA_PCI
+static int ide_pci_clear_simplex(unsigned long dma_base, const char *name)
+{
+ u8 dma_stat = inb(dma_base + 2);
+
+ outb(dma_stat & 0x60, dma_base + 2);
+ dma_stat = inb(dma_base + 2);
+
+ return (dma_stat & 0x80) ? 1 : 0;
+}
+
+/**
+ * ide_pci_dma_base - setup BMIBA
+ * @hwif: IDE interface
+ * @d: IDE port info
+ *
+ * Fetch the DMA Bus-Master-I/O-Base-Address (BMIBA) from PCI space.
+ */
+
+unsigned long ide_pci_dma_base(ide_hwif_t *hwif, const struct ide_port_info *d)
+{
+ struct pci_dev *dev = to_pci_dev(hwif->dev);
+ unsigned long dma_base = 0;
+
+ if (hwif->host_flags & IDE_HFLAG_MMIO)
+ return hwif->dma_base;
+
+ if (hwif->mate && hwif->mate->dma_base) {
+ dma_base = hwif->mate->dma_base - (hwif->channel ? 0 : 8);
+ } else {
+ u8 baridx = (d->host_flags & IDE_HFLAG_CS5520) ? 2 : 4;
+
+ dma_base = pci_resource_start(dev, baridx);
+
+ if (dma_base == 0) {
+ printk(KERN_ERR "%s %s: DMA base is invalid\n",
+ d->name, pci_name(dev));
+ return 0;
+ }
+ }
+
+ if (hwif->channel)
+ dma_base += 8;
+
+ return dma_base;
+}
+EXPORT_SYMBOL_GPL(ide_pci_dma_base);
+
+int ide_pci_check_simplex(ide_hwif_t *hwif, const struct ide_port_info *d)
+{
+ struct pci_dev *dev = to_pci_dev(hwif->dev);
+ u8 dma_stat;
+
+ if (d->host_flags & (IDE_HFLAG_MMIO | IDE_HFLAG_CS5520))
+ goto out;
+
+ if (d->host_flags & IDE_HFLAG_CLEAR_SIMPLEX) {
+ if (ide_pci_clear_simplex(hwif->dma_base, d->name))
+ printk(KERN_INFO "%s %s: simplex device: DMA forced\n",
+ d->name, pci_name(dev));
+ goto out;
+ }
+
+ /*
+ * If the device claims "simplex" DMA, this means that only one of
+ * the two interfaces can be trusted with DMA at any point in time
+ * (so we should enable DMA only on one of the two interfaces).
+ *
+ * FIXME: At this point we haven't probed the drives so we can't make
+ * the appropriate decision. Really we should defer this problem until
+ * we tune the drive then try to grab DMA ownership if we want to be
+ * the DMA end. This has to be become dynamic to handle hot-plug.
+ */
+ dma_stat = hwif->dma_ops->dma_sff_read_status(hwif);
+ if ((dma_stat & 0x80) && hwif->mate && hwif->mate->dma_base) {
+ printk(KERN_INFO "%s %s: simplex device: DMA disabled\n",
+ d->name, pci_name(dev));
+ return -1;
+ }
+out:
+ return 0;
+}
+EXPORT_SYMBOL_GPL(ide_pci_check_simplex);
+
+/*
+ * Set up BM-DMA capability (PnP BIOS should have done this)
+ */
+int ide_pci_set_master(struct pci_dev *dev, const char *name)
+{
+ u16 pcicmd;
+
+ pci_read_config_word(dev, PCI_COMMAND, &pcicmd);
+
+ if ((pcicmd & PCI_COMMAND_MASTER) == 0) {
+ pci_set_master(dev);
+
+ if (pci_read_config_word(dev, PCI_COMMAND, &pcicmd) ||
+ (pcicmd & PCI_COMMAND_MASTER) == 0) {
+ printk(KERN_ERR "%s %s: error updating PCICMD\n",
+ name, pci_name(dev));
+ return -EIO;
+ }
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(ide_pci_set_master);
+#endif /* CONFIG_BLK_DEV_IDEDMA_PCI */
+
+void ide_setup_pci_noise(struct pci_dev *dev, const struct ide_port_info *d)
+{
+ printk(KERN_INFO "%s %s: IDE controller (0x%04x:0x%04x rev 0x%02x)\n",
+ d->name, pci_name(dev),
+ dev->vendor, dev->device, dev->revision);
+}
+EXPORT_SYMBOL_GPL(ide_setup_pci_noise);
+
+
+/**
+ * ide_pci_enable - do PCI enables
+ * @dev: PCI device
+ * @d: IDE port info
+ *
+ * Enable the IDE PCI device. We attempt to enable the device in full
+ * but if that fails then we only need IO space. The PCI code should
+ * have setup the proper resources for us already for controllers in
+ * legacy mode.
+ *
+ * Returns zero on success or an error code
+ */
+
+static int ide_pci_enable(struct pci_dev *dev, const struct ide_port_info *d)
+{
+ int ret, bars;
+
+ if (pci_enable_device(dev)) {
+ ret = pci_enable_device_io(dev);
+ if (ret < 0) {
+ printk(KERN_WARNING "%s %s: couldn't enable device\n",
+ d->name, pci_name(dev));
+ goto out;
+ }
+ printk(KERN_WARNING "%s %s: BIOS configuration fixed\n",
+ d->name, pci_name(dev));
+ }
+
+ /*
+ * assume all devices can do 32-bit DMA for now, we can add
+ * a DMA mask field to the struct ide_port_info if we need it
+ * (or let lower level driver set the DMA mask)
+ */
+ ret = dma_set_mask(&dev->dev, DMA_BIT_MASK(32));
+ if (ret < 0) {
+ printk(KERN_ERR "%s %s: can't set DMA mask\n",
+ d->name, pci_name(dev));
+ goto out;
+ }
+
+ if (d->host_flags & IDE_HFLAG_SINGLE)
+ bars = (1 << 2) - 1;
+ else
+ bars = (1 << 4) - 1;
+
+ if ((d->host_flags & IDE_HFLAG_NO_DMA) == 0) {
+ if (d->host_flags & IDE_HFLAG_CS5520)
+ bars |= (1 << 2);
+ else
+ bars |= (1 << 4);
+ }
+
+ ret = pci_request_selected_regions(dev, bars, d->name);
+ if (ret < 0)
+ printk(KERN_ERR "%s %s: can't reserve resources\n",
+ d->name, pci_name(dev));
+out:
+ return ret;
+}
+
+/**
+ * ide_pci_configure - configure an unconfigured device
+ * @dev: PCI device
+ * @d: IDE port info
+ *
+ * Enable and configure the PCI device we have been passed.
+ * Returns zero on success or an error code.
+ */
+
+static int ide_pci_configure(struct pci_dev *dev, const struct ide_port_info *d)
+{
+ u16 pcicmd = 0;
+ /*
+ * PnP BIOS was *supposed* to have setup this device, but we
+ * can do it ourselves, so long as the BIOS has assigned an IRQ
+ * (or possibly the device is using a "legacy header" for IRQs).
+ * Maybe the user deliberately *disabled* the device,
+ * but we'll eventually ignore it again if no drives respond.
+ */
+ if (ide_setup_pci_baseregs(dev, d->name) ||
+ pci_write_config_word(dev, PCI_COMMAND, pcicmd | PCI_COMMAND_IO)) {
+ printk(KERN_INFO "%s %s: device disabled (BIOS)\n",
+ d->name, pci_name(dev));
+ return -ENODEV;
+ }
+ if (pci_read_config_word(dev, PCI_COMMAND, &pcicmd)) {
+ printk(KERN_ERR "%s %s: error accessing PCI regs\n",
+ d->name, pci_name(dev));
+ return -EIO;
+ }
+ if (!(pcicmd & PCI_COMMAND_IO)) {
+ printk(KERN_ERR "%s %s: unable to enable IDE controller\n",
+ d->name, pci_name(dev));
+ return -ENXIO;
+ }
+ return 0;
+}
+
+/**
+ * ide_pci_check_iomem - check a register is I/O
+ * @dev: PCI device
+ * @d: IDE port info
+ * @bar: BAR number
+ *
+ * Checks if a BAR is configured and points to MMIO space. If so,
+ * return an error code. Otherwise return 0
+ */
+
+static int ide_pci_check_iomem(struct pci_dev *dev, const struct ide_port_info *d,
+ int bar)
+{
+ ulong flags = pci_resource_flags(dev, bar);
+
+ /* Unconfigured ? */
+ if (!flags || pci_resource_len(dev, bar) == 0)
+ return 0;
+
+ /* I/O space */
+ if (flags & IORESOURCE_IO)
+ return 0;
+
+ /* Bad */
+ return -EINVAL;
+}
+
+/**
+ * ide_hw_configure - configure a struct ide_hw instance
+ * @dev: PCI device holding interface
+ * @d: IDE port info
+ * @port: port number
+ * @hw: struct ide_hw instance corresponding to this port
+ *
+ * Perform the initial set up for the hardware interface structure. This
+ * is done per interface port rather than per PCI device. There may be
+ * more than one port per device.
+ *
+ * Returns zero on success or an error code.
+ */
+
+static int ide_hw_configure(struct pci_dev *dev, const struct ide_port_info *d,
+ unsigned int port, struct ide_hw *hw)
+{
+ unsigned long ctl = 0, base = 0;
+
+ if ((d->host_flags & IDE_HFLAG_ISA_PORTS) == 0) {
+ if (ide_pci_check_iomem(dev, d, 2 * port) ||
+ ide_pci_check_iomem(dev, d, 2 * port + 1)) {
+ printk(KERN_ERR "%s %s: I/O baseregs (BIOS) are "
+ "reported as MEM for port %d!\n",
+ d->name, pci_name(dev), port);
+ return -EINVAL;
+ }
+
+ ctl = pci_resource_start(dev, 2*port+1);
+ base = pci_resource_start(dev, 2*port);
+ } else {
+ /* Use default values */
+ ctl = port ? 0x374 : 0x3f4;
+ base = port ? 0x170 : 0x1f0;
+ }
+
+ if (!base || !ctl) {
+ printk(KERN_ERR "%s %s: bad PCI BARs for port %d, skipping\n",
+ d->name, pci_name(dev), port);
+ return -EINVAL;
+ }
+
+ memset(hw, 0, sizeof(*hw));
+ hw->dev = &dev->dev;
+ ide_std_init_ports(hw, base, ctl | 2);
+
+ return 0;
+}
+
+#ifdef CONFIG_BLK_DEV_IDEDMA_PCI
+/**
+ * ide_hwif_setup_dma - configure DMA interface
+ * @hwif: IDE interface
+ * @d: IDE port info
+ *
+ * Set up the DMA base for the interface. Enable the master bits as
+ * necessary and attempt to bring the device DMA into a ready to use
+ * state
+ */
+
+int ide_hwif_setup_dma(ide_hwif_t *hwif, const struct ide_port_info *d)
+{
+ struct pci_dev *dev = to_pci_dev(hwif->dev);
+
+ if ((d->host_flags & IDE_HFLAG_NO_AUTODMA) == 0 ||
+ ((dev->class >> 8) == PCI_CLASS_STORAGE_IDE &&
+ (dev->class & 0x80))) {
+ unsigned long base = ide_pci_dma_base(hwif, d);
+
+ if (base == 0)
+ return -1;
+
+ hwif->dma_base = base;
+
+ if (hwif->dma_ops == NULL)
+ hwif->dma_ops = &sff_dma_ops;
+
+ if (ide_pci_check_simplex(hwif, d) < 0)
+ return -1;
+
+ if (ide_pci_set_master(dev, d->name) < 0)
+ return -1;
+
+ if (hwif->host_flags & IDE_HFLAG_MMIO)
+ printk(KERN_INFO " %s: MMIO-DMA\n", hwif->name);
+ else
+ printk(KERN_INFO " %s: BM-DMA at 0x%04lx-0x%04lx\n",
+ hwif->name, base, base + 7);
+
+ hwif->extra_base = base + (hwif->channel ? 8 : 16);
+
+ if (ide_allocate_dma_engine(hwif))
+ return -1;
+ }
+
+ return 0;
+}
+#endif /* CONFIG_BLK_DEV_IDEDMA_PCI */
+
+/**
+ * ide_setup_pci_controller - set up IDE PCI
+ * @dev: PCI device
+ * @d: IDE port info
+ * @noisy: verbose flag
+ *
+ * Set up the PCI and controller side of the IDE interface. This brings
+ * up the PCI side of the device, checks that the device is enabled
+ * and enables it if need be
+ */
+
+static int ide_setup_pci_controller(struct pci_dev *dev,
+ const struct ide_port_info *d, int noisy)
+{
+ int ret;
+ u16 pcicmd;
+
+ if (noisy)
+ ide_setup_pci_noise(dev, d);
+
+ ret = ide_pci_enable(dev, d);
+ if (ret < 0)
+ goto out;
+
+ ret = pci_read_config_word(dev, PCI_COMMAND, &pcicmd);
+ if (ret < 0) {
+ printk(KERN_ERR "%s %s: error accessing PCI regs\n",
+ d->name, pci_name(dev));
+ goto out;
+ }
+ if (!(pcicmd & PCI_COMMAND_IO)) { /* is device disabled? */
+ ret = ide_pci_configure(dev, d);
+ if (ret < 0)
+ goto out;
+ printk(KERN_INFO "%s %s: device enabled (Linux)\n",
+ d->name, pci_name(dev));
+ }
+
+out:
+ return ret;
+}
+
+/**
+ * ide_pci_setup_ports - configure ports/devices on PCI IDE
+ * @dev: PCI device
+ * @d: IDE port info
+ * @hw: struct ide_hw instances corresponding to this PCI IDE device
+ * @hws: struct ide_hw pointers table to update
+ *
+ * Scan the interfaces attached to this device and do any
+ * necessary per port setup. Attach the devices and ask the
+ * generic DMA layer to do its work for us.
+ *
+ * Normally called automaticall from do_ide_pci_setup_device,
+ * but is also used directly as a helper function by some controllers
+ * where the chipset setup is not the default PCI IDE one.
+ */
+
+void ide_pci_setup_ports(struct pci_dev *dev, const struct ide_port_info *d,
+ struct ide_hw *hw, struct ide_hw **hws)
+{
+ int channels = (d->host_flags & IDE_HFLAG_SINGLE) ? 1 : 2, port;
+ u8 tmp;
+
+ /*
+ * Set up the IDE ports
+ */
+
+ for (port = 0; port < channels; ++port) {
+ const struct ide_pci_enablebit *e = &d->enablebits[port];
+
+ if (e->reg && (pci_read_config_byte(dev, e->reg, &tmp) ||
+ (tmp & e->mask) != e->val)) {
+ printk(KERN_INFO "%s %s: IDE port disabled\n",
+ d->name, pci_name(dev));
+ continue; /* port not enabled */
+ }
+
+ if (ide_hw_configure(dev, d, port, hw + port))
+ continue;
+
+ *(hws + port) = hw + port;
+ }
+}
+EXPORT_SYMBOL_GPL(ide_pci_setup_ports);
+
+/*
+ * ide_setup_pci_device() looks at the primary/secondary interfaces
+ * on a PCI IDE device and, if they are enabled, prepares the IDE driver
+ * for use with them. This generic code works for most PCI chipsets.
+ *
+ * One thing that is not standardized is the location of the
+ * primary/secondary interface "enable/disable" bits. For chipsets that
+ * we "know" about, this information is in the struct ide_port_info;
+ * for all other chipsets, we just assume both interfaces are enabled.
+ */
+static int do_ide_setup_pci_device(struct pci_dev *dev,
+ const struct ide_port_info *d,
+ u8 noisy)
+{
+ int pciirq, ret;
+
+ /*
+ * Can we trust the reported IRQ?
+ */
+ pciirq = dev->irq;
+
+ /*
+ * This allows offboard ide-pci cards the enable a BIOS,
+ * verify interrupt settings of split-mirror pci-config
+ * space, place chipset into init-mode, and/or preserve
+ * an interrupt if the card is not native ide support.
+ */
+ ret = d->init_chipset ? d->init_chipset(dev) : 0;
+ if (ret < 0)
+ goto out;
+
+ if (ide_pci_is_in_compatibility_mode(dev)) {
+ if (noisy)
+ printk(KERN_INFO "%s %s: not 100%% native mode: will "
+ "probe irqs later\n", d->name, pci_name(dev));
+ pciirq = 0;
+ } else if (!pciirq && noisy) {
+ printk(KERN_WARNING "%s %s: bad irq (%d): will probe later\n",
+ d->name, pci_name(dev), pciirq);
+ } else if (noisy) {
+ printk(KERN_INFO "%s %s: 100%% native mode on irq %d\n",
+ d->name, pci_name(dev), pciirq);
+ }
+
+ ret = pciirq;
+out:
+ return ret;
+}
+
+int ide_pci_init_two(struct pci_dev *dev1, struct pci_dev *dev2,
+ const struct ide_port_info *d, void *priv)
+{
+ struct pci_dev *pdev[] = { dev1, dev2 };
+ struct ide_host *host;
+ int ret, i, n_ports = dev2 ? 4 : 2;
+ struct ide_hw hw[4], *hws[] = { NULL, NULL, NULL, NULL };
+
+ for (i = 0; i < n_ports / 2; i++) {
+ ret = ide_setup_pci_controller(pdev[i], d, !i);
+ if (ret < 0)
+ goto out;
+
+ ide_pci_setup_ports(pdev[i], d, &hw[i*2], &hws[i*2]);
+ }
+
+ host = ide_host_alloc(d, hws, n_ports);
+ if (host == NULL) {
+ ret = -ENOMEM;
+ goto out;
+ }
+
+ host->dev[0] = &dev1->dev;
+ if (dev2)
+ host->dev[1] = &dev2->dev;
+
+ host->host_priv = priv;
+ host->irq_flags = IRQF_SHARED;
+
+ pci_set_drvdata(pdev[0], host);
+ if (dev2)
+ pci_set_drvdata(pdev[1], host);
+
+ for (i = 0; i < n_ports / 2; i++) {
+ ret = do_ide_setup_pci_device(pdev[i], d, !i);
+
+ /*
+ * FIXME: Mom, mom, they stole me the helper function to undo
+ * do_ide_setup_pci_device() on the first device!
+ */
+ if (ret < 0)
+ goto out;
+
+ /* fixup IRQ */
+ if (ide_pci_is_in_compatibility_mode(pdev[i])) {
+ hw[i*2].irq = pci_get_legacy_ide_irq(pdev[i], 0);
+ hw[i*2 + 1].irq = pci_get_legacy_ide_irq(pdev[i], 1);
+ } else
+ hw[i*2 + 1].irq = hw[i*2].irq = ret;
+ }
+
+ ret = ide_host_register(host, d, hws);
+ if (ret)
+ ide_host_free(host);
+out:
+ return ret;
+}
+EXPORT_SYMBOL_GPL(ide_pci_init_two);
+
+int ide_pci_init_one(struct pci_dev *dev, const struct ide_port_info *d,
+ void *priv)
+{
+ return ide_pci_init_two(dev, NULL, d, priv);
+}
+EXPORT_SYMBOL_GPL(ide_pci_init_one);
+
+void ide_pci_remove(struct pci_dev *dev)
+{
+ struct ide_host *host = pci_get_drvdata(dev);
+ struct pci_dev *dev2 = host->dev[1] ? to_pci_dev(host->dev[1]) : NULL;
+ int bars;
+
+ if (host->host_flags & IDE_HFLAG_SINGLE)
+ bars = (1 << 2) - 1;
+ else
+ bars = (1 << 4) - 1;
+
+ if ((host->host_flags & IDE_HFLAG_NO_DMA) == 0) {
+ if (host->host_flags & IDE_HFLAG_CS5520)
+ bars |= (1 << 2);
+ else
+ bars |= (1 << 4);
+ }
+
+ ide_host_remove(host);
+
+ if (dev2)
+ pci_release_selected_regions(dev2, bars);
+ pci_release_selected_regions(dev, bars);
+
+ if (dev2)
+ pci_disable_device(dev2);
+ pci_disable_device(dev);
+}
+EXPORT_SYMBOL_GPL(ide_pci_remove);
+
+#ifdef CONFIG_PM
+int ide_pci_suspend(struct pci_dev *dev, pm_message_t state)
+{
+ pci_save_state(dev);
+ pci_disable_device(dev);
+ pci_set_power_state(dev, pci_choose_state(dev, state));
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(ide_pci_suspend);
+
+int ide_pci_resume(struct pci_dev *dev)
+{
+ struct ide_host *host = pci_get_drvdata(dev);
+ int rc;
+
+ pci_set_power_state(dev, PCI_D0);
+
+ rc = pci_enable_device(dev);
+ if (rc)
+ return rc;
+
+ pci_restore_state(dev);
+ pci_set_master(dev);
+
+ if (host->init_chipset)
+ host->init_chipset(dev);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(ide_pci_resume);
+#endif