summaryrefslogtreecommitdiffstats
path: root/kernel/drivers/ide/qd65xx.c
diff options
context:
space:
mode:
Diffstat (limited to 'kernel/drivers/ide/qd65xx.c')
-rw-r--r--kernel/drivers/ide/qd65xx.c445
1 files changed, 445 insertions, 0 deletions
diff --git a/kernel/drivers/ide/qd65xx.c b/kernel/drivers/ide/qd65xx.c
new file mode 100644
index 000000000..a6fb6a894
--- /dev/null
+++ b/kernel/drivers/ide/qd65xx.c
@@ -0,0 +1,445 @@
+/*
+ * Copyright (C) 1996-2001 Linus Torvalds & author (see below)
+ */
+
+/*
+ * Version 0.03 Cleaned auto-tune, added probe
+ * Version 0.04 Added second channel tuning
+ * Version 0.05 Enhanced tuning ; added qd6500 support
+ * Version 0.06 Added dos driver's list
+ * Version 0.07 Second channel bug fix
+ *
+ * QDI QD6500/QD6580 EIDE controller fast support
+ *
+ * To activate controller support, use "ide0=qd65xx"
+ */
+
+/*
+ * Rewritten from the work of Colten Edwards <pje120@cs.usask.ca> by
+ * Samuel Thibault <samuel.thibault@ens-lyon.org>
+ */
+
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/timer.h>
+#include <linux/mm.h>
+#include <linux/ioport.h>
+#include <linux/blkdev.h>
+#include <linux/ide.h>
+#include <linux/init.h>
+#include <asm/io.h>
+
+#define DRV_NAME "qd65xx"
+
+#include "qd65xx.h"
+
+/*
+ * I/O ports are 0x30-0x31 (and 0x32-0x33 for qd6580)
+ * or 0xb0-0xb1 (and 0xb2-0xb3 for qd6580)
+ * -- qd6500 is a single IDE interface
+ * -- qd6580 is a dual IDE interface
+ *
+ * More research on qd6580 being done by willmore@cig.mot.com (David)
+ * More Information given by Petr Soucek (petr@ryston.cz)
+ * http://www.ryston.cz/petr/vlb
+ */
+
+/*
+ * base: Timer1
+ *
+ *
+ * base+0x01: Config (R/O)
+ *
+ * bit 0: ide baseport: 1 = 0x1f0 ; 0 = 0x170 (only useful for qd6500)
+ * bit 1: qd65xx baseport: 1 = 0xb0 ; 0 = 0x30
+ * bit 2: ID3: bus speed: 1 = <=33MHz ; 0 = >33MHz
+ * bit 3: qd6500: 1 = disabled, 0 = enabled
+ * qd6580: 1
+ * upper nibble:
+ * qd6500: 1100
+ * qd6580: either 1010 or 0101
+ *
+ *
+ * base+0x02: Timer2 (qd6580 only)
+ *
+ *
+ * base+0x03: Control (qd6580 only)
+ *
+ * bits 0-3 must always be set 1
+ * bit 4 must be set 1, but is set 0 by dos driver while measuring vlb clock
+ * bit 0 : 1 = Only primary port enabled : channel 0 for hda, channel 1 for hdb
+ * 0 = Primary and Secondary ports enabled : channel 0 for hda & hdb
+ * channel 1 for hdc & hdd
+ * bit 1 : 1 = only disks on primary port
+ * 0 = disks & ATAPI devices on primary port
+ * bit 2-4 : always 0
+ * bit 5 : status, but of what ?
+ * bit 6 : always set 1 by dos driver
+ * bit 7 : set 1 for non-ATAPI devices on primary port
+ * (maybe read-ahead and post-write buffer ?)
+ */
+
+static int timings[4]={-1,-1,-1,-1}; /* stores current timing for each timer */
+
+/*
+ * qd65xx_select:
+ *
+ * This routine is invoked to prepare for access to a given drive.
+ */
+
+static void qd65xx_dev_select(ide_drive_t *drive)
+{
+ u8 index = (( (QD_TIMREG(drive)) & 0x80 ) >> 7) |
+ (QD_TIMREG(drive) & 0x02);
+
+ if (timings[index] != QD_TIMING(drive))
+ outb(timings[index] = QD_TIMING(drive), QD_TIMREG(drive));
+
+ outb(drive->select | ATA_DEVICE_OBS, drive->hwif->io_ports.device_addr);
+}
+
+/*
+ * qd6500_compute_timing
+ *
+ * computes the timing value where
+ * lower nibble represents active time, in count of VLB clocks
+ * upper nibble represents recovery time, in count of VLB clocks
+ */
+
+static u8 qd6500_compute_timing (ide_hwif_t *hwif, int active_time, int recovery_time)
+{
+ int clk = ide_vlb_clk ? ide_vlb_clk : 50;
+ u8 act_cyc, rec_cyc;
+
+ if (clk <= 33) {
+ act_cyc = 9 - IDE_IN(active_time * clk / 1000 + 1, 2, 9);
+ rec_cyc = 15 - IDE_IN(recovery_time * clk / 1000 + 1, 0, 15);
+ } else {
+ act_cyc = 8 - IDE_IN(active_time * clk / 1000 + 1, 1, 8);
+ rec_cyc = 18 - IDE_IN(recovery_time * clk / 1000 + 1, 3, 18);
+ }
+
+ return (rec_cyc << 4) | 0x08 | act_cyc;
+}
+
+/*
+ * qd6580_compute_timing
+ *
+ * idem for qd6580
+ */
+
+static u8 qd6580_compute_timing (int active_time, int recovery_time)
+{
+ int clk = ide_vlb_clk ? ide_vlb_clk : 50;
+ u8 act_cyc, rec_cyc;
+
+ act_cyc = 17 - IDE_IN(active_time * clk / 1000 + 1, 2, 17);
+ rec_cyc = 15 - IDE_IN(recovery_time * clk / 1000 + 1, 2, 15);
+
+ return (rec_cyc << 4) | act_cyc;
+}
+
+/*
+ * qd_find_disk_type
+ *
+ * tries to find timing from dos driver's table
+ */
+
+static int qd_find_disk_type (ide_drive_t *drive,
+ int *active_time, int *recovery_time)
+{
+ struct qd65xx_timing_s *p;
+ char *m = (char *)&drive->id[ATA_ID_PROD];
+ char model[ATA_ID_PROD_LEN];
+
+ if (*m == 0)
+ return 0;
+
+ strncpy(model, m, ATA_ID_PROD_LEN);
+ ide_fixstring(model, ATA_ID_PROD_LEN, 1); /* byte-swap */
+
+ for (p = qd65xx_timing ; p->offset != -1 ; p++) {
+ if (!strncmp(p->model, model+p->offset, 4)) {
+ printk(KERN_DEBUG "%s: listed !\n", drive->name);
+ *active_time = p->active;
+ *recovery_time = p->recovery;
+ return 1;
+ }
+ }
+ return 0;
+}
+
+/*
+ * qd_set_timing:
+ *
+ * records the timing
+ */
+
+static void qd_set_timing (ide_drive_t *drive, u8 timing)
+{
+ unsigned long data = (unsigned long)ide_get_drivedata(drive);
+
+ data &= 0xff00;
+ data |= timing;
+ ide_set_drivedata(drive, (void *)data);
+
+ printk(KERN_DEBUG "%s: %#x\n", drive->name, timing);
+}
+
+static void qd6500_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive)
+{
+ u16 *id = drive->id;
+ int active_time = 175;
+ int recovery_time = 415; /* worst case values from the dos driver */
+
+ /* FIXME: use drive->pio_mode value */
+ if (!qd_find_disk_type(drive, &active_time, &recovery_time) &&
+ (id[ATA_ID_OLD_PIO_MODES] & 0xff) && (id[ATA_ID_FIELD_VALID] & 2) &&
+ id[ATA_ID_EIDE_PIO] >= 240) {
+ printk(KERN_INFO "%s: PIO mode%d\n", drive->name,
+ id[ATA_ID_OLD_PIO_MODES] & 0xff);
+ active_time = 110;
+ recovery_time = drive->id[ATA_ID_EIDE_PIO] - 120;
+ }
+
+ qd_set_timing(drive, qd6500_compute_timing(drive->hwif,
+ active_time, recovery_time));
+}
+
+static void qd6580_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive)
+{
+ const u8 pio = drive->pio_mode - XFER_PIO_0;
+ struct ide_timing *t = ide_timing_find_mode(XFER_PIO_0 + pio);
+ unsigned int cycle_time;
+ int active_time = 175;
+ int recovery_time = 415; /* worst case values from the dos driver */
+ u8 base = (hwif->config_data & 0xff00) >> 8;
+
+ if (drive->id && !qd_find_disk_type(drive, &active_time, &recovery_time)) {
+ cycle_time = ide_pio_cycle_time(drive, pio);
+
+ switch (pio) {
+ case 0: break;
+ case 3:
+ if (cycle_time >= 110) {
+ active_time = 86;
+ recovery_time = cycle_time - 102;
+ } else
+ printk(KERN_WARNING "%s: Strange recovery time !\n",drive->name);
+ break;
+ case 4:
+ if (cycle_time >= 69) {
+ active_time = 70;
+ recovery_time = cycle_time - 61;
+ } else
+ printk(KERN_WARNING "%s: Strange recovery time !\n",drive->name);
+ break;
+ default:
+ if (cycle_time >= 180) {
+ active_time = 110;
+ recovery_time = cycle_time - 120;
+ } else {
+ active_time = t->active;
+ recovery_time = cycle_time - active_time;
+ }
+ }
+ printk(KERN_INFO "%s: PIO mode%d\n", drive->name,pio);
+ }
+
+ if (!hwif->channel && drive->media != ide_disk) {
+ outb(0x5f, QD_CONTROL_PORT);
+ printk(KERN_WARNING "%s: ATAPI: disabled read-ahead FIFO "
+ "and post-write buffer on %s.\n",
+ drive->name, hwif->name);
+ }
+
+ qd_set_timing(drive, qd6580_compute_timing(active_time, recovery_time));
+}
+
+/*
+ * qd_testreg
+ *
+ * tests if the given port is a register
+ */
+
+static int __init qd_testreg(int port)
+{
+ unsigned long flags;
+ u8 savereg, readreg;
+
+ local_irq_save(flags);
+ savereg = inb_p(port);
+ outb_p(QD_TESTVAL, port); /* safe value */
+ readreg = inb_p(port);
+ outb(savereg, port);
+ local_irq_restore(flags);
+
+ if (savereg == QD_TESTVAL) {
+ printk(KERN_ERR "Outch ! the probe for qd65xx isn't reliable !\n");
+ printk(KERN_ERR "Please contact maintainers to tell about your hardware\n");
+ printk(KERN_ERR "Assuming qd65xx is not present.\n");
+ return 1;
+ }
+
+ return (readreg != QD_TESTVAL);
+}
+
+static void __init qd6500_init_dev(ide_drive_t *drive)
+{
+ ide_hwif_t *hwif = drive->hwif;
+ u8 base = (hwif->config_data & 0xff00) >> 8;
+ u8 config = QD_CONFIG(hwif);
+
+ ide_set_drivedata(drive, (void *)QD6500_DEF_DATA);
+}
+
+static void __init qd6580_init_dev(ide_drive_t *drive)
+{
+ ide_hwif_t *hwif = drive->hwif;
+ u16 t1, t2;
+ u8 base = (hwif->config_data & 0xff00) >> 8;
+ u8 config = QD_CONFIG(hwif);
+
+ if (hwif->host_flags & IDE_HFLAG_SINGLE) {
+ t1 = QD6580_DEF_DATA;
+ t2 = QD6580_DEF_DATA2;
+ } else
+ t2 = t1 = hwif->channel ? QD6580_DEF_DATA2 : QD6580_DEF_DATA;
+
+ ide_set_drivedata(drive, (void *)((drive->dn & 1) ? t2 : t1));
+}
+
+static const struct ide_tp_ops qd65xx_tp_ops = {
+ .exec_command = ide_exec_command,
+ .read_status = ide_read_status,
+ .read_altstatus = ide_read_altstatus,
+ .write_devctl = ide_write_devctl,
+
+ .dev_select = qd65xx_dev_select,
+ .tf_load = ide_tf_load,
+ .tf_read = ide_tf_read,
+
+ .input_data = ide_input_data,
+ .output_data = ide_output_data,
+};
+
+static const struct ide_port_ops qd6500_port_ops = {
+ .init_dev = qd6500_init_dev,
+ .set_pio_mode = qd6500_set_pio_mode,
+};
+
+static const struct ide_port_ops qd6580_port_ops = {
+ .init_dev = qd6580_init_dev,
+ .set_pio_mode = qd6580_set_pio_mode,
+};
+
+static const struct ide_port_info qd65xx_port_info __initconst = {
+ .name = DRV_NAME,
+ .tp_ops = &qd65xx_tp_ops,
+ .chipset = ide_qd65xx,
+ .host_flags = IDE_HFLAG_IO_32BIT |
+ IDE_HFLAG_NO_DMA,
+ .pio_mask = ATA_PIO4,
+};
+
+/*
+ * qd_probe:
+ *
+ * looks at the specified baseport, and if qd found, registers & initialises it
+ * return 1 if another qd may be probed
+ */
+
+static int __init qd_probe(int base)
+{
+ int rc;
+ u8 config, unit, control;
+ struct ide_port_info d = qd65xx_port_info;
+
+ config = inb(QD_CONFIG_PORT);
+
+ if (! ((config & QD_CONFIG_BASEPORT) >> 1 == (base == 0xb0)) )
+ return -ENODEV;
+
+ unit = ! (config & QD_CONFIG_IDE_BASEPORT);
+
+ if (unit)
+ d.host_flags |= IDE_HFLAG_QD_2ND_PORT;
+
+ switch (config & 0xf0) {
+ case QD_CONFIG_QD6500:
+ if (qd_testreg(base))
+ return -ENODEV; /* bad register */
+
+ if (config & QD_CONFIG_DISABLED) {
+ printk(KERN_WARNING "qd6500 is disabled !\n");
+ return -ENODEV;
+ }
+
+ printk(KERN_NOTICE "qd6500 at %#x\n", base);
+ printk(KERN_DEBUG "qd6500: config=%#x, ID3=%u\n",
+ config, QD_ID3);
+
+ d.port_ops = &qd6500_port_ops;
+ d.host_flags |= IDE_HFLAG_SINGLE;
+ break;
+ case QD_CONFIG_QD6580_A:
+ case QD_CONFIG_QD6580_B:
+ if (qd_testreg(base) || qd_testreg(base + 0x02))
+ return -ENODEV; /* bad registers */
+
+ control = inb(QD_CONTROL_PORT);
+
+ printk(KERN_NOTICE "qd6580 at %#x\n", base);
+ printk(KERN_DEBUG "qd6580: config=%#x, control=%#x, ID3=%u\n",
+ config, control, QD_ID3);
+
+ outb(QD_DEF_CONTR, QD_CONTROL_PORT);
+
+ d.port_ops = &qd6580_port_ops;
+ if (control & QD_CONTR_SEC_DISABLED)
+ d.host_flags |= IDE_HFLAG_SINGLE;
+
+ printk(KERN_INFO "qd6580: %s IDE board\n",
+ (control & QD_CONTR_SEC_DISABLED) ? "single" : "dual");
+ break;
+ default:
+ return -ENODEV;
+ }
+
+ rc = ide_legacy_device_add(&d, (base << 8) | config);
+
+ if (d.host_flags & IDE_HFLAG_SINGLE)
+ return (rc == 0) ? 1 : rc;
+
+ return rc;
+}
+
+static bool probe_qd65xx;
+
+module_param_named(probe, probe_qd65xx, bool, 0);
+MODULE_PARM_DESC(probe, "probe for QD65xx chipsets");
+
+static int __init qd65xx_init(void)
+{
+ int rc1, rc2 = -ENODEV;
+
+ if (probe_qd65xx == 0)
+ return -ENODEV;
+
+ rc1 = qd_probe(0x30);
+ if (rc1)
+ rc2 = qd_probe(0xb0);
+
+ if (rc1 < 0 && rc2 < 0)
+ return -ENODEV;
+
+ return 0;
+}
+
+module_init(qd65xx_init);
+
+MODULE_AUTHOR("Samuel Thibault");
+MODULE_DESCRIPTION("support of qd65xx vlb ide chipset");
+MODULE_LICENSE("GPL");