diff options
Diffstat (limited to 'kernel/drivers/ide/ide-acpi.c')
| -rw-r--r-- | kernel/drivers/ide/ide-acpi.c | 621 |
1 files changed, 621 insertions, 0 deletions
diff --git a/kernel/drivers/ide/ide-acpi.c b/kernel/drivers/ide/ide-acpi.c new file mode 100644 index 000000000..b6940992a --- /dev/null +++ b/kernel/drivers/ide/ide-acpi.c @@ -0,0 +1,621 @@ +/* + * Provides ACPI support for IDE drives. + * + * Copyright (C) 2005 Intel Corp. + * Copyright (C) 2005 Randy Dunlap + * Copyright (C) 2006 SUSE Linux Products GmbH + * Copyright (C) 2006 Hannes Reinecke + */ + +#include <linux/acpi.h> +#include <linux/ata.h> +#include <linux/delay.h> +#include <linux/device.h> +#include <linux/errno.h> +#include <linux/kernel.h> +#include <linux/slab.h> +#include <linux/ide.h> +#include <linux/pci.h> +#include <linux/dmi.h> +#include <linux/module.h> + +#define REGS_PER_GTF 7 + +struct GTM_buffer { + u32 PIO_speed0; + u32 DMA_speed0; + u32 PIO_speed1; + u32 DMA_speed1; + u32 GTM_flags; +}; + +struct ide_acpi_drive_link { + acpi_handle obj_handle; + u8 idbuff[512]; +}; + +struct ide_acpi_hwif_link { + ide_hwif_t *hwif; + acpi_handle obj_handle; + struct GTM_buffer gtm; + struct ide_acpi_drive_link master; + struct ide_acpi_drive_link slave; +}; + +#undef DEBUGGING +/* note: adds function name and KERN_DEBUG */ +#ifdef DEBUGGING +#define DEBPRINT(fmt, args...) \ + printk(KERN_DEBUG "%s: " fmt, __func__, ## args) +#else +#define DEBPRINT(fmt, args...) do {} while (0) +#endif /* DEBUGGING */ + +static bool ide_noacpi; +module_param_named(noacpi, ide_noacpi, bool, 0); +MODULE_PARM_DESC(noacpi, "disable IDE ACPI support"); + +static bool ide_acpigtf; +module_param_named(acpigtf, ide_acpigtf, bool, 0); +MODULE_PARM_DESC(acpigtf, "enable IDE ACPI _GTF support"); + +static bool ide_acpionboot; +module_param_named(acpionboot, ide_acpionboot, bool, 0); +MODULE_PARM_DESC(acpionboot, "call IDE ACPI methods on boot"); + +static bool ide_noacpi_psx; +static int no_acpi_psx(const struct dmi_system_id *id) +{ + ide_noacpi_psx = true; + printk(KERN_NOTICE"%s detected - disable ACPI _PSx.\n", id->ident); + return 0; +} + +static const struct dmi_system_id ide_acpi_dmi_table[] = { + /* Bug 9673. */ + /* We should check if this is because ACPI NVS isn't save/restored. */ + { + .callback = no_acpi_psx, + .ident = "HP nx9005", + .matches = { + DMI_MATCH(DMI_BIOS_VENDOR, "Phoenix Technologies Ltd."), + DMI_MATCH(DMI_BIOS_VERSION, "KAM1.60") + }, + }, + + { } /* terminate list */ +}; + +int ide_acpi_init(void) +{ + dmi_check_system(ide_acpi_dmi_table); + return 0; +} + +bool ide_port_acpi(ide_hwif_t *hwif) +{ + return ide_noacpi == 0 && hwif->acpidata; +} + +static acpi_handle acpi_get_child(acpi_handle handle, u64 addr) +{ + struct acpi_device *adev; + + if (!handle || acpi_bus_get_device(handle, &adev)) + return NULL; + + adev = acpi_find_child_device(adev, addr, false); + return adev ? adev->handle : NULL; +} + +/** + * ide_get_dev_handle - finds acpi_handle and PCI device.function + * @dev: device to locate + * @handle: returned acpi_handle for @dev + * @pcidevfn: return PCI device.func for @dev + * + * Returns the ACPI object handle to the corresponding PCI device. + * + * Returns 0 on success, <0 on error. + */ +static int ide_get_dev_handle(struct device *dev, acpi_handle *handle, + u64 *pcidevfn) +{ + struct pci_dev *pdev = to_pci_dev(dev); + unsigned int bus, devnum, func; + u64 addr; + acpi_handle dev_handle; + acpi_status status; + struct acpi_device_info *dinfo = NULL; + int ret = -ENODEV; + + bus = pdev->bus->number; + devnum = PCI_SLOT(pdev->devfn); + func = PCI_FUNC(pdev->devfn); + /* ACPI _ADR encoding for PCI bus: */ + addr = (u64)(devnum << 16 | func); + + DEBPRINT("ENTER: pci %02x:%02x.%01x\n", bus, devnum, func); + + dev_handle = ACPI_HANDLE(dev); + if (!dev_handle) { + DEBPRINT("no acpi handle for device\n"); + goto err; + } + + status = acpi_get_object_info(dev_handle, &dinfo); + if (ACPI_FAILURE(status)) { + DEBPRINT("get_object_info for device failed\n"); + goto err; + } + if (dinfo && (dinfo->valid & ACPI_VALID_ADR) && + dinfo->address == addr) { + *pcidevfn = addr; + *handle = dev_handle; + } else { + DEBPRINT("get_object_info for device has wrong " + " address: %llu, should be %u\n", + dinfo ? (unsigned long long)dinfo->address : -1ULL, + (unsigned int)addr); + goto err; + } + + DEBPRINT("for dev=0x%x.%x, addr=0x%llx, *handle=0x%p\n", + devnum, func, (unsigned long long)addr, *handle); + ret = 0; +err: + kfree(dinfo); + return ret; +} + +/** + * ide_acpi_hwif_get_handle - Get ACPI object handle for a given hwif + * @hwif: device to locate + * + * Retrieves the object handle for a given hwif. + * + * Returns handle on success, 0 on error. + */ +static acpi_handle ide_acpi_hwif_get_handle(ide_hwif_t *hwif) +{ + struct device *dev = hwif->gendev.parent; + acpi_handle uninitialized_var(dev_handle); + u64 pcidevfn; + acpi_handle chan_handle; + int err; + + DEBPRINT("ENTER: device %s\n", hwif->name); + + if (!dev) { + DEBPRINT("no PCI device for %s\n", hwif->name); + return NULL; + } + + err = ide_get_dev_handle(dev, &dev_handle, &pcidevfn); + if (err < 0) { + DEBPRINT("ide_get_dev_handle failed (%d)\n", err); + return NULL; + } + + /* get child objects of dev_handle == channel objects, + * + _their_ children == drive objects */ + /* channel is hwif->channel */ + chan_handle = acpi_get_child(dev_handle, hwif->channel); + DEBPRINT("chan adr=%d: handle=0x%p\n", + hwif->channel, chan_handle); + + return chan_handle; +} + +/** + * do_drive_get_GTF - get the drive bootup default taskfile settings + * @drive: the drive for which the taskfile settings should be retrieved + * @gtf_length: number of bytes of _GTF data returned at @gtf_address + * @gtf_address: buffer containing _GTF taskfile arrays + * + * The _GTF method has no input parameters. + * It returns a variable number of register set values (registers + * hex 1F1..1F7, taskfiles). + * The <variable number> is not known in advance, so have ACPI-CA + * allocate the buffer as needed and return it, then free it later. + * + * The returned @gtf_length and @gtf_address are only valid if the + * function return value is 0. + */ +static int do_drive_get_GTF(ide_drive_t *drive, + unsigned int *gtf_length, unsigned long *gtf_address, + unsigned long *obj_loc) +{ + acpi_status status; + struct acpi_buffer output; + union acpi_object *out_obj; + int err = -ENODEV; + + *gtf_length = 0; + *gtf_address = 0UL; + *obj_loc = 0UL; + + if (!drive->acpidata->obj_handle) { + DEBPRINT("No ACPI object found for %s\n", drive->name); + goto out; + } + + /* Setting up output buffer */ + output.length = ACPI_ALLOCATE_BUFFER; + output.pointer = NULL; /* ACPI-CA sets this; save/free it later */ + + /* _GTF has no input parameters */ + err = -EIO; + status = acpi_evaluate_object(drive->acpidata->obj_handle, "_GTF", + NULL, &output); + if (ACPI_FAILURE(status)) { + printk(KERN_DEBUG + "%s: Run _GTF error: status = 0x%x\n", + __func__, status); + goto out; + } + + if (!output.length || !output.pointer) { + DEBPRINT("Run _GTF: " + "length or ptr is NULL (0x%llx, 0x%p)\n", + (unsigned long long)output.length, + output.pointer); + goto out; + } + + out_obj = output.pointer; + if (out_obj->type != ACPI_TYPE_BUFFER) { + DEBPRINT("Run _GTF: error: " + "expected object type of ACPI_TYPE_BUFFER, " + "got 0x%x\n", out_obj->type); + err = -ENOENT; + kfree(output.pointer); + goto out; + } + + if (!out_obj->buffer.length || !out_obj->buffer.pointer || + out_obj->buffer.length % REGS_PER_GTF) { + printk(KERN_ERR + "%s: unexpected GTF length (%d) or addr (0x%p)\n", + __func__, out_obj->buffer.length, + out_obj->buffer.pointer); + err = -ENOENT; + kfree(output.pointer); + goto out; + } + + *gtf_length = out_obj->buffer.length; + *gtf_address = (unsigned long)out_obj->buffer.pointer; + *obj_loc = (unsigned long)out_obj; + DEBPRINT("returning gtf_length=%d, gtf_address=0x%lx, obj_loc=0x%lx\n", + *gtf_length, *gtf_address, *obj_loc); + err = 0; +out: + return err; +} + +/** + * do_drive_set_taskfiles - write the drive taskfile settings from _GTF + * @drive: the drive to which the taskfile command should be sent + * @gtf_length: total number of bytes of _GTF taskfiles + * @gtf_address: location of _GTF taskfile arrays + * + * Write {gtf_address, length gtf_length} in groups of + * REGS_PER_GTF bytes. + */ +static int do_drive_set_taskfiles(ide_drive_t *drive, + unsigned int gtf_length, + unsigned long gtf_address) +{ + int rc = 0, err; + int gtf_count = gtf_length / REGS_PER_GTF; + int ix; + + DEBPRINT("total GTF bytes=%u (0x%x), gtf_count=%d, addr=0x%lx\n", + gtf_length, gtf_length, gtf_count, gtf_address); + + /* send all taskfile registers (0x1f1-0x1f7) *in*that*order* */ + for (ix = 0; ix < gtf_count; ix++) { + u8 *gtf = (u8 *)(gtf_address + ix * REGS_PER_GTF); + struct ide_cmd cmd; + + DEBPRINT("(0x1f1-1f7): " + "hex: %02x %02x %02x %02x %02x %02x %02x\n", + gtf[0], gtf[1], gtf[2], + gtf[3], gtf[4], gtf[5], gtf[6]); + + if (!ide_acpigtf) { + DEBPRINT("_GTF execution disabled\n"); + continue; + } + + /* convert GTF to taskfile */ + memset(&cmd, 0, sizeof(cmd)); + memcpy(&cmd.tf.feature, gtf, REGS_PER_GTF); + cmd.valid.out.tf = IDE_VALID_OUT_TF | IDE_VALID_DEVICE; + cmd.valid.in.tf = IDE_VALID_IN_TF | IDE_VALID_DEVICE; + + err = ide_no_data_taskfile(drive, &cmd); + if (err) { + printk(KERN_ERR "%s: ide_no_data_taskfile failed: %u\n", + __func__, err); + rc = err; + } + } + + return rc; +} + +/** + * ide_acpi_exec_tfs - get then write drive taskfile settings + * @drive: the drive for which the taskfile settings should be + * written. + * + * According to the ACPI spec this should be called after _STM + * has been evaluated for the interface. Some ACPI vendors interpret + * that as a hard requirement and modify the taskfile according + * to the Identify Drive information passed down with _STM. + * So one should really make sure to call this only after _STM has + * been executed. + */ +int ide_acpi_exec_tfs(ide_drive_t *drive) +{ + int ret; + unsigned int gtf_length; + unsigned long gtf_address; + unsigned long obj_loc; + + DEBPRINT("call get_GTF, drive=%s port=%d\n", drive->name, drive->dn); + + ret = do_drive_get_GTF(drive, >f_length, >f_address, &obj_loc); + if (ret < 0) { + DEBPRINT("get_GTF error (%d)\n", ret); + return ret; + } + + DEBPRINT("call set_taskfiles, drive=%s\n", drive->name); + + ret = do_drive_set_taskfiles(drive, gtf_length, gtf_address); + kfree((void *)obj_loc); + if (ret < 0) { + DEBPRINT("set_taskfiles error (%d)\n", ret); + } + + DEBPRINT("ret=%d\n", ret); + + return ret; +} + +/** + * ide_acpi_get_timing - get the channel (controller) timings + * @hwif: target IDE interface (channel) + * + * This function executes the _GTM ACPI method for the target channel. + * + */ +void ide_acpi_get_timing(ide_hwif_t *hwif) +{ + acpi_status status; + struct acpi_buffer output; + union acpi_object *out_obj; + + /* Setting up output buffer for _GTM */ + output.length = ACPI_ALLOCATE_BUFFER; + output.pointer = NULL; /* ACPI-CA sets this; save/free it later */ + + /* _GTM has no input parameters */ + status = acpi_evaluate_object(hwif->acpidata->obj_handle, "_GTM", + NULL, &output); + + DEBPRINT("_GTM status: %d, outptr: 0x%p, outlen: 0x%llx\n", + status, output.pointer, + (unsigned long long)output.length); + + if (ACPI_FAILURE(status)) { + DEBPRINT("Run _GTM error: status = 0x%x\n", status); + return; + } + + if (!output.length || !output.pointer) { + DEBPRINT("Run _GTM: length or ptr is NULL (0x%llx, 0x%p)\n", + (unsigned long long)output.length, + output.pointer); + kfree(output.pointer); + return; + } + + out_obj = output.pointer; + if (out_obj->type != ACPI_TYPE_BUFFER) { + DEBPRINT("Run _GTM: error: " + "expected object type of ACPI_TYPE_BUFFER, " + "got 0x%x\n", out_obj->type); + kfree(output.pointer); + return; + } + + if (!out_obj->buffer.length || !out_obj->buffer.pointer || + out_obj->buffer.length != sizeof(struct GTM_buffer)) { + printk(KERN_ERR + "%s: unexpected _GTM length (0x%x)[should be 0x%zx] or " + "addr (0x%p)\n", + __func__, out_obj->buffer.length, + sizeof(struct GTM_buffer), out_obj->buffer.pointer); + kfree(output.pointer); + return; + } + + memcpy(&hwif->acpidata->gtm, out_obj->buffer.pointer, + sizeof(struct GTM_buffer)); + + DEBPRINT("_GTM info: ptr: 0x%p, len: 0x%x, exp.len: 0x%Zx\n", + out_obj->buffer.pointer, out_obj->buffer.length, + sizeof(struct GTM_buffer)); + + DEBPRINT("_GTM fields: 0x%x, 0x%x, 0x%x, 0x%x, 0x%x\n", + hwif->acpidata->gtm.PIO_speed0, + hwif->acpidata->gtm.DMA_speed0, + hwif->acpidata->gtm.PIO_speed1, + hwif->acpidata->gtm.DMA_speed1, + hwif->acpidata->gtm.GTM_flags); + + kfree(output.pointer); +} + +/** + * ide_acpi_push_timing - set the channel (controller) timings + * @hwif: target IDE interface (channel) + * + * This function executes the _STM ACPI method for the target channel. + * + * _STM requires Identify Drive data, which has to passed as an argument. + * Unfortunately drive->id is a mangled version which we can't readily + * use; hence we'll get the information afresh. + */ +void ide_acpi_push_timing(ide_hwif_t *hwif) +{ + acpi_status status; + struct acpi_object_list input; + union acpi_object in_params[3]; + struct ide_acpi_drive_link *master = &hwif->acpidata->master; + struct ide_acpi_drive_link *slave = &hwif->acpidata->slave; + + /* Give the GTM buffer + drive Identify data to the channel via the + * _STM method: */ + /* setup input parameters buffer for _STM */ + input.count = 3; + input.pointer = in_params; + in_params[0].type = ACPI_TYPE_BUFFER; + in_params[0].buffer.length = sizeof(struct GTM_buffer); + in_params[0].buffer.pointer = (u8 *)&hwif->acpidata->gtm; + in_params[1].type = ACPI_TYPE_BUFFER; + in_params[1].buffer.length = ATA_ID_WORDS * 2; + in_params[1].buffer.pointer = (u8 *)&master->idbuff; + in_params[2].type = ACPI_TYPE_BUFFER; + in_params[2].buffer.length = ATA_ID_WORDS * 2; + in_params[2].buffer.pointer = (u8 *)&slave->idbuff; + /* Output buffer: _STM has no output */ + + status = acpi_evaluate_object(hwif->acpidata->obj_handle, "_STM", + &input, NULL); + + if (ACPI_FAILURE(status)) { + DEBPRINT("Run _STM error: status = 0x%x\n", status); + } + DEBPRINT("_STM status: %d\n", status); +} + +/** + * ide_acpi_set_state - set the channel power state + * @hwif: target IDE interface + * @on: state, on/off + * + * This function executes the _PS0/_PS3 ACPI method to set the power state. + * ACPI spec requires _PS0 when IDE power on and _PS3 when power off + */ +void ide_acpi_set_state(ide_hwif_t *hwif, int on) +{ + ide_drive_t *drive; + int i; + + if (ide_noacpi_psx) + return; + + DEBPRINT("ENTER:\n"); + + /* channel first and then drives for power on and verse versa for power off */ + if (on) + acpi_bus_set_power(hwif->acpidata->obj_handle, ACPI_STATE_D0); + + ide_port_for_each_present_dev(i, drive, hwif) { + if (drive->acpidata->obj_handle) + acpi_bus_set_power(drive->acpidata->obj_handle, + on ? ACPI_STATE_D0 : ACPI_STATE_D3_COLD); + } + + if (!on) + acpi_bus_set_power(hwif->acpidata->obj_handle, + ACPI_STATE_D3_COLD); +} + +/** + * ide_acpi_init_port - initialize the ACPI link for an IDE interface + * @hwif: target IDE interface (channel) + * + * The ACPI spec is not quite clear when the drive identify buffer + * should be obtained. Calling IDENTIFY DEVICE during shutdown + * is not the best of ideas as the drive might already being put to + * sleep. And obviously we can't call it during resume. + * So we get the information during startup; but this means that + * any changes during run-time will be lost after resume. + */ +void ide_acpi_init_port(ide_hwif_t *hwif) +{ + hwif->acpidata = kzalloc(sizeof(struct ide_acpi_hwif_link), GFP_KERNEL); + if (!hwif->acpidata) + return; + + hwif->acpidata->obj_handle = ide_acpi_hwif_get_handle(hwif); + if (!hwif->acpidata->obj_handle) { + DEBPRINT("no ACPI object for %s found\n", hwif->name); + kfree(hwif->acpidata); + hwif->acpidata = NULL; + } +} + +void ide_acpi_port_init_devices(ide_hwif_t *hwif) +{ + ide_drive_t *drive; + int i, err; + + if (hwif->acpidata == NULL) + return; + + /* + * The ACPI spec mandates that we send information + * for both drives, regardless whether they are connected + * or not. + */ + hwif->devices[0]->acpidata = &hwif->acpidata->master; + hwif->devices[1]->acpidata = &hwif->acpidata->slave; + + /* get _ADR info for each device */ + ide_port_for_each_present_dev(i, drive, hwif) { + acpi_handle dev_handle; + + DEBPRINT("ENTER: %s at channel#: %d port#: %d\n", + drive->name, hwif->channel, drive->dn & 1); + + /* TBD: could also check ACPI object VALID bits */ + dev_handle = acpi_get_child(hwif->acpidata->obj_handle, + drive->dn & 1); + + DEBPRINT("drive %s handle 0x%p\n", drive->name, dev_handle); + + drive->acpidata->obj_handle = dev_handle; + } + + /* send IDENTIFY for each device */ + ide_port_for_each_present_dev(i, drive, hwif) { + err = taskfile_lib_get_identify(drive, drive->acpidata->idbuff); + if (err) + DEBPRINT("identify device %s failed (%d)\n", + drive->name, err); + } + + if (ide_noacpi || ide_acpionboot == 0) { + DEBPRINT("ACPI methods disabled on boot\n"); + return; + } + + /* ACPI _PS0 before _STM */ + ide_acpi_set_state(hwif, 1); + /* + * ACPI requires us to call _STM on startup + */ + ide_acpi_get_timing(hwif); + ide_acpi_push_timing(hwif); + + ide_port_for_each_present_dev(i, drive, hwif) { + ide_acpi_exec_tfs(drive); + } +} |