summaryrefslogtreecommitdiffstats
path: root/kernel/drivers/ide/cy82c693.c
diff options
context:
space:
mode:
Diffstat (limited to 'kernel/drivers/ide/cy82c693.c')
-rw-r--r--kernel/drivers/ide/cy82c693.c233
1 files changed, 233 insertions, 0 deletions
diff --git a/kernel/drivers/ide/cy82c693.c b/kernel/drivers/ide/cy82c693.c
new file mode 100644
index 000000000..f5820079a
--- /dev/null
+++ b/kernel/drivers/ide/cy82c693.c
@@ -0,0 +1,233 @@
+/*
+ * Copyright (C) 1998-2000 Andreas S. Krebs (akrebs@altavista.net), Maintainer
+ * Copyright (C) 1998-2002 Andre Hedrick <andre@linux-ide.org>, Integrator
+ * Copyright (C) 2007-2011 Bartlomiej Zolnierkiewicz
+ *
+ * CYPRESS CY82C693 chipset IDE controller
+ *
+ * The CY82C693 chipset is used on Digital's PC-Alpha 164SX boards.
+ */
+
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/pci.h>
+#include <linux/ide.h>
+#include <linux/init.h>
+
+#include <asm/io.h>
+
+#define DRV_NAME "cy82c693"
+
+/*
+ * NOTE: the value for busmaster timeout is tricky and I got it by
+ * trial and error! By using a to low value will cause DMA timeouts
+ * and drop IDE performance, and by using a to high value will cause
+ * audio playback to scatter.
+ * If you know a better value or how to calc it, please let me know.
+ */
+
+/* twice the value written in cy82c693ub datasheet */
+#define BUSMASTER_TIMEOUT 0x50
+/*
+ * the value above was tested on my machine and it seems to work okay
+ */
+
+/* here are the offset definitions for the registers */
+#define CY82_IDE_CMDREG 0x04
+#define CY82_IDE_ADDRSETUP 0x48
+#define CY82_IDE_MASTER_IOR 0x4C
+#define CY82_IDE_MASTER_IOW 0x4D
+#define CY82_IDE_SLAVE_IOR 0x4E
+#define CY82_IDE_SLAVE_IOW 0x4F
+#define CY82_IDE_MASTER_8BIT 0x50
+#define CY82_IDE_SLAVE_8BIT 0x51
+
+#define CY82_INDEX_PORT 0x22
+#define CY82_DATA_PORT 0x23
+
+#define CY82_INDEX_CHANNEL0 0x30
+#define CY82_INDEX_CHANNEL1 0x31
+#define CY82_INDEX_TIMEOUT 0x32
+
+/*
+ * set DMA mode a specific channel for CY82C693
+ */
+
+static void cy82c693_set_dma_mode(ide_hwif_t *hwif, ide_drive_t *drive)
+{
+ const u8 mode = drive->dma_mode;
+ u8 single = (mode & 0x10) >> 4, index = 0, data = 0;
+
+ index = hwif->channel ? CY82_INDEX_CHANNEL1 : CY82_INDEX_CHANNEL0;
+
+ data = (mode & 3) | (single << 2);
+
+ outb(index, CY82_INDEX_PORT);
+ outb(data, CY82_DATA_PORT);
+
+ /*
+ * note: below we set the value for Bus Master IDE TimeOut Register
+ * I'm not absolutely sure what this does, but it solved my problem
+ * with IDE DMA and sound, so I now can play sound and work with
+ * my IDE driver at the same time :-)
+ *
+ * If you know the correct (best) value for this register please
+ * let me know - ASK
+ */
+
+ data = BUSMASTER_TIMEOUT;
+ outb(CY82_INDEX_TIMEOUT, CY82_INDEX_PORT);
+ outb(data, CY82_DATA_PORT);
+}
+
+static void cy82c693_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive)
+{
+ struct pci_dev *dev = to_pci_dev(hwif->dev);
+ int bus_speed = ide_pci_clk ? ide_pci_clk : 33;
+ const unsigned long T = 1000000 / bus_speed;
+ unsigned int addrCtrl;
+ struct ide_timing t;
+ u8 time_16, time_8;
+
+ /* select primary or secondary channel */
+ if (drive->dn > 1) { /* drive is on the secondary channel */
+ dev = pci_get_slot(dev->bus, dev->devfn+1);
+ if (!dev) {
+ printk(KERN_ERR "%s: tune_drive: "
+ "Cannot find secondary interface!\n",
+ drive->name);
+ return;
+ }
+ }
+
+ ide_timing_compute(drive, drive->pio_mode, &t, T, 1);
+
+ time_16 = clamp_val(t.recover - 1, 0, 15) |
+ (clamp_val(t.active - 1, 0, 15) << 4);
+ time_8 = clamp_val(t.act8b - 1, 0, 15) |
+ (clamp_val(t.rec8b - 1, 0, 15) << 4);
+
+ /* now let's write the clocks registers */
+ if ((drive->dn & 1) == 0) {
+ /*
+ * set master drive
+ * address setup control register
+ * is 32 bit !!!
+ */
+ pci_read_config_dword(dev, CY82_IDE_ADDRSETUP, &addrCtrl);
+
+ addrCtrl &= (~0xF);
+ addrCtrl |= clamp_val(t.setup - 1, 0, 15);
+ pci_write_config_dword(dev, CY82_IDE_ADDRSETUP, addrCtrl);
+
+ /* now let's set the remaining registers */
+ pci_write_config_byte(dev, CY82_IDE_MASTER_IOR, time_16);
+ pci_write_config_byte(dev, CY82_IDE_MASTER_IOW, time_16);
+ pci_write_config_byte(dev, CY82_IDE_MASTER_8BIT, time_8);
+ } else {
+ /*
+ * set slave drive
+ * address setup control register
+ * is 32 bit !!!
+ */
+ pci_read_config_dword(dev, CY82_IDE_ADDRSETUP, &addrCtrl);
+
+ addrCtrl &= (~0xF0);
+ addrCtrl |= (clamp_val(t.setup - 1, 0, 15) << 4);
+ pci_write_config_dword(dev, CY82_IDE_ADDRSETUP, addrCtrl);
+
+ /* now let's set the remaining registers */
+ pci_write_config_byte(dev, CY82_IDE_SLAVE_IOR, time_16);
+ pci_write_config_byte(dev, CY82_IDE_SLAVE_IOW, time_16);
+ pci_write_config_byte(dev, CY82_IDE_SLAVE_8BIT, time_8);
+ }
+ if (drive->dn > 1)
+ pci_dev_put(dev);
+}
+
+static void init_iops_cy82c693(ide_hwif_t *hwif)
+{
+ static ide_hwif_t *primary;
+ struct pci_dev *dev = to_pci_dev(hwif->dev);
+
+ if (PCI_FUNC(dev->devfn) == 1)
+ primary = hwif;
+ else {
+ hwif->mate = primary;
+ hwif->channel = 1;
+ }
+}
+
+static const struct ide_port_ops cy82c693_port_ops = {
+ .set_pio_mode = cy82c693_set_pio_mode,
+ .set_dma_mode = cy82c693_set_dma_mode,
+};
+
+static const struct ide_port_info cy82c693_chipset = {
+ .name = DRV_NAME,
+ .init_iops = init_iops_cy82c693,
+ .port_ops = &cy82c693_port_ops,
+ .host_flags = IDE_HFLAG_SINGLE,
+ .pio_mask = ATA_PIO4,
+ .swdma_mask = ATA_SWDMA2,
+ .mwdma_mask = ATA_MWDMA2,
+};
+
+static int cy82c693_init_one(struct pci_dev *dev,
+ const struct pci_device_id *id)
+{
+ struct pci_dev *dev2;
+ int ret = -ENODEV;
+
+ /* CY82C693 is more than only a IDE controller.
+ Function 1 is primary IDE channel, function 2 - secondary. */
+ if ((dev->class >> 8) == PCI_CLASS_STORAGE_IDE &&
+ PCI_FUNC(dev->devfn) == 1) {
+ dev2 = pci_get_slot(dev->bus, dev->devfn + 1);
+ ret = ide_pci_init_two(dev, dev2, &cy82c693_chipset, NULL);
+ if (ret)
+ pci_dev_put(dev2);
+ }
+ return ret;
+}
+
+static void cy82c693_remove(struct pci_dev *dev)
+{
+ struct ide_host *host = pci_get_drvdata(dev);
+ struct pci_dev *dev2 = host->dev[1] ? to_pci_dev(host->dev[1]) : NULL;
+
+ ide_pci_remove(dev);
+ pci_dev_put(dev2);
+}
+
+static const struct pci_device_id cy82c693_pci_tbl[] = {
+ { PCI_VDEVICE(CONTAQ, PCI_DEVICE_ID_CONTAQ_82C693), 0 },
+ { 0, },
+};
+MODULE_DEVICE_TABLE(pci, cy82c693_pci_tbl);
+
+static struct pci_driver cy82c693_pci_driver = {
+ .name = "Cypress_IDE",
+ .id_table = cy82c693_pci_tbl,
+ .probe = cy82c693_init_one,
+ .remove = cy82c693_remove,
+ .suspend = ide_pci_suspend,
+ .resume = ide_pci_resume,
+};
+
+static int __init cy82c693_ide_init(void)
+{
+ return ide_pci_register_driver(&cy82c693_pci_driver);
+}
+
+static void __exit cy82c693_ide_exit(void)
+{
+ pci_unregister_driver(&cy82c693_pci_driver);
+}
+
+module_init(cy82c693_ide_init);
+module_exit(cy82c693_ide_exit);
+
+MODULE_AUTHOR("Andreas Krebs, Andre Hedrick, Bartlomiej Zolnierkiewicz");
+MODULE_DESCRIPTION("PCI driver module for the Cypress CY82C693 IDE");
+MODULE_LICENSE("GPL");